| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking updates from David Miller:
1) Support offloading wireless authentication to userspace via
NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.
2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
Setup and cleanup of namespaces now all run asynchronously and thus
performance is significantly increased.
3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
Streiff.
4) Support zerocopy on RDS sockets, from Sowmini Varadhan.
5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
Borkmann.
6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
Chevallier.
7) Support grafting of child qdiscs in mlxsw driver, from Nogah
Frankel.
8) Add packet forwarding tests to selftests, from Ido Schimmel.
9) Deal with sub-optimal GSO packets better in BBR congestion control,
from Eric Dumazet.
10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.
11) Add path MTU tests to selftests, from Stefano Brivio.
12) Various bits of IPSEC offloading support for mlx5, from Aviad
Yehezkel, Yossi Kuperman, and Saeed Mahameed.
13) Support RSS spreading on ntuple filters in SFC driver, from Edward
Cree.
14) Lots of sockmap work from John Fastabend. Applications can use eBPF
to filter sendmsg and sendpage operations.
15) In-kernel receive TLS support, from Dave Watson.
16) Add XDP support to ixgbevf, this is significant because it should
allow optimized XDP usage in various cloud environments. From Tony
Nguyen.
17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
Venkataramanan et al.
18) IP fragmentation match offload support in nfp driver, from Pieter
Jansen van Vuuren.
19) Support XDP redirect in i40e driver, from Björn Töpel.
20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
tracepoints in their raw form, from Alexei Starovoitov.
21) Lots of striding RQ improvements to mlx5 driver with many
performance improvements, from Tariq Toukan.
22) Use rhashtable for inet frag reassembly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
net: mvneta: improve suspend/resume
net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
net: bgmac: Correctly annotate register space
route: check sysctl_fib_multipath_use_neigh earlier than hash
fix typo in command value in drivers/net/phy/mdio-bitbang.
sky2: Increase D3 delay to sky2 stops working after suspend
net/mlx5e: Set EQE based as default TX interrupt moderation mode
ibmvnic: Disable irqs before exiting reset from closed state
net: sched: do not emit messages while holding spinlock
vlan: also check phy_driver ts_info for vlan's real device
Bluetooth: Mark expected switch fall-throughs
Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
Bluetooth: btrsi: remove unused including <linux/version.h>
Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
sh_eth: kill useless check in __sh_eth_get_regs()
sh_eth: add sh_eth_cpu_data::no_xdfar flag
ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main RCU subsystem changes in this cycle were:
- Miscellaneous fixes, perhaps most notably removing obsolete code
whose only purpose in life was to gather information for the
now-removed RCU debugfs facility. Other notable changes include
removing NO_HZ_FULL_ALL in favor of the nohz_full kernel boot
parameter, minor optimizations for expedited grace periods, some
added tracing, creating an RCU-specific workqueue using Tejun's new
WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
rcu: Create RCU-specific workqueues with rescuers
torture: Provide more sensible nreader/nwriter defaults for rcuperf
torture: Grace periods do not piggyback off of themselves
torture: Adjust rcuperf trace processing to allow for workqueues
torture: Default jitter off when running rcuperf
torture: Specify qemu memory size with --memory argument
rcutorture: Add basic ARM64 support to run scripts
rcutorture: Update kvm.sh header comment
rcutorture: Record which grace-period primitives are tested
rcutorture: Re-enable testing of dynamic expediting
rcutorture: Avoid fake-writer use of undefined primitives
rcutorture: Abstract function and module names
rcutorture: Replace multi-instance kzalloc() with kcalloc()
rcu: Remove SRCU throttling
srcu: Remove dead code in srcu_gp_end()
srcu: Reduce scans of srcu_data in counter wrap check
srcu: Prevent sdp->srcu_gp_seq_needed_exp counter wrap
srcu: Abstract function name
rcu: Make expedited RCU CPU selection avoid unnecessary stores
rcu: Trace expedited GP delays due to transitioning CPUs
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-03-31
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add raw BPF tracepoint API in order to have a BPF program type that
can access kernel internal arguments of the tracepoints in their
raw form similar to kprobes based BPF programs. This infrastructure
also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which
returns an anon-inode backed fd for the tracepoint object that allows
for automatic detach of the BPF program resp. unregistering of the
tracepoint probe on fd release, from Alexei.
2) Add new BPF cgroup hooks at bind() and connect() entry in order to
allow BPF programs to reject, inspect or modify user space passed
struct sockaddr, and as well a hook at post bind time once the port
has been allocated. They are used in FB's container management engine
for implementing policy, replacing fragile LD_PRELOAD wrapper
intercepting bind() and connect() calls that only works in limited
scenarios like glibc based apps but not for other runtimes in
containerized applications, from Andrey.
3) BPF_F_INGRESS flag support has been added to sockmap programs for
their redirect helper call bringing it in line with cls_bpf based
programs. Support is added for both variants of sockmap programs,
meaning for tx ULP hooks as well as recv skb hooks, from John.
4) Various improvements on BPF side for the nfp driver, besides others
this work adds BPF map update and delete helper call support from
the datapath, JITing of 32 and 64 bit XADD instructions as well as
offload support of bpf_get_prandom_u32() call. Initial implementation
of nfp packet cache has been tackled that optimizes memory access
(see merge commit for further details), from Jakub and Jiong.
5) Removal of struct bpf_verifier_env argument from the print_bpf_insn()
API has been done in order to prepare to use print_bpf_insn() soon
out of perf tool directly. This makes the print_bpf_insn() API more
generic and pushes the env into private data. bpftool is adjusted
as well with the print_bpf_insn() argument removal, from Jiri.
6) Couple of cleanups and prep work for the upcoming BTF (BPF Type
Format). The latter will reuse the current BPF verifier log as
well, thus bpf_verifier_log() is further generalized, from Martin.
7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read
and write support has been added in similar fashion to existing
IPv6 IPV6_TCLASS socket option we already have, from Nikita.
8) Fixes in recent sockmap scatterlist API usage, which did not use
sg_init_table() for initialization thus triggering a BUG_ON() in
scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and
uses a small helper sg_init_marker() to properly handle the affected
cases, from Prashant.
9) Let the BPF core follow IDR code convention and therefore use the
idr_preload() and idr_preload_end() helpers, which would also help
idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory
pressure, from Shaohua.
10) Last but not least, a spelling fix in an error message for the
BPF cookie UID helper under BPF sample code, from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a tracepoint to track reference counting on the rxrpc_peer struct.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add a tracepoint to track reference counting on the rxrpc_local struct.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Introduce BPF_PROG_TYPE_RAW_TRACEPOINT bpf program type to access
kernel internal arguments of the tracepoints in their raw form.
>From bpf program point of view the access to the arguments look like:
struct bpf_raw_tracepoint_args {
__u64 args[0];
};
int bpf_prog(struct bpf_raw_tracepoint_args *ctx)
{
// program can read args[N] where N depends on tracepoint
// and statically verified at program load+attach time
}
kprobe+bpf infrastructure allows programs access function arguments.
This feature allows programs access raw tracepoint arguments.
Similar to proposed 'dynamic ftrace events' there are no abi guarantees
to what the tracepoints arguments are and what their meaning is.
The program needs to type cast args properly and use bpf_probe_read()
helper to access struct fields when argument is a pointer.
For every tracepoint __bpf_trace_##call function is prepared.
In assembler it looks like:
(gdb) disassemble __bpf_trace_xdp_exception
Dump of assembler code for function __bpf_trace_xdp_exception:
0xffffffff81132080 <+0>: mov %ecx,%ecx
0xffffffff81132082 <+2>: jmpq 0xffffffff811231f0 <bpf_trace_run3>
where
TRACE_EVENT(xdp_exception,
TP_PROTO(const struct net_device *dev,
const struct bpf_prog *xdp, u32 act),
The above assembler snippet is casting 32-bit 'act' field into 'u64'
to pass into bpf_trace_run3(), while 'dev' and 'xdp' args are passed as-is.
All of ~500 of __bpf_trace_*() functions are only 5-10 byte long
and in total this approach adds 7k bytes to .text.
This approach gives the lowest possible overhead
while calling trace_xdp_exception() from kernel C code and
transitioning into bpf land.
Since tracepoint+bpf are used at speeds of 1M+ events per second
this is valuable optimization.
The new BPF_RAW_TRACEPOINT_OPEN sys_bpf command is introduced
that returns anon_inode FD of 'bpf-raw-tracepoint' object.
The user space looks like:
// load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type
prog_fd = bpf_prog_load(...);
// receive anon_inode fd for given bpf_raw_tracepoint with prog attached
raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd);
Ctrl-C of tracing daemon or cmdline tool that uses this feature
will automatically detach bpf program, unload it and
unregister tracepoint probe.
On the kernel side the __bpf_raw_tp_map section of pointers to
tracepoint definition and to __bpf_trace_*() probe function is used
to find a tracepoint with "xdp_exception" name and
corresponding __bpf_trace_xdp_exception() probe function
which are passed to tracepoint_probe_register() to connect probe
with tracepoint.
Addition of bpf_raw_tracepoint doesn't interfere with ftrace and perf
tracepoint mechanisms. perf_event_open() can be used in parallel
on the same tracepoint.
Multiple bpf_raw_tracepoint_open("xdp_exception", prog_fd) are permitted.
Each with its own bpf program. The kernel will execute
all tracepoint probes and all attached bpf programs.
In the future bpf_raw_tracepoints can be extended with
query/introspection logic.
__bpf_raw_tp_map section logic was contributed by Steven Rostedt
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value
- convert 'type array[]' tracepoint arguments into 'type *array',
since compiler will warn that sizeof('type array[]') == sizeof('type *array')
and later should be used instead
The CAST_TO_U64 macro in the later patch will enforce that tracepoint
arguments can only be integers, pointers, or less than 8 byte structures.
Larger structures should be passed by reference.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Add a tracepoint to track rxrpc calls moving into the completed state and
to log the completion type and the recorded error value and abort code.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
In rxrpc and afs, use the debug_ids that are monotonically allocated to
various objects as they're allocated rather than pointers as kernel
pointers are now hashed making them less useful. Further, the debug ids
aren't reused anywhere nearly as quickly.
In addition, allow kernel services that use rxrpc, such as afs, to take
numbers from the rxrpc counter, assign them to their own call struct and
pass them in to rxrpc for both client and service calls so that the trace
lines for each will have the same ID tag.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add a tracepoint to trace packet resend events and to dump the Tx
annotation buffer for added illumination.
Signed-off-by: David Howells <dhowells@rdhat.com>
|
|
Swap the positions of blk_addr and blksz in the tracepoint print arguments
so that they match the print format.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: d2f82254e4e8 ("mmc: core: Add members to mmc_request and mmc_data for CQE's")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:
- Miscellaneous fixes, perhaps most notably removing obsolete
code whose only purpose in life was to gather information for
the now-removed RCU debugfs facility. Other notable changes
include removing NO_HZ_FULL_ALL in favor of the nohz_full kernel
boot parameter, minor optimizations for expedited grace periods,
some added tracing, creating an RCU-specific workqueue using Tejun's
new WQ_MEM_RECLAIM flag, and several cleanups to code and comments.
- SRCU cleanups and optimizations.
- Torture-test updates, perhaps most notably the adding of ARMv8
support, but also including numerous cleanups and usability fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that arch/metag/ has been removed, drop a bunch of metag references
in various codes across the whole tree:
- VM_GROWSUP and __VM_ARCH_SPECIFIC_1.
- MT_METAG_* ELF note types.
- METAG Kconfig dependencies (FRAME_POINTER) and ranges
(MAX_STACK_SIZE_MB).
- metag cases in tools (checkstack.pl, recordmcount.c, perf).
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-mm@kvack.org
Cc: linux-metag@vger.kernel.org
|
|
If a CPU is transitioning to or from offline state, an expedited
grace period may undergo a timed wait. This timed wait can unduly
delay grace periods, so this commit adds a trace statement to make
it visible.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit adds more tracing of expedited grace periods to enable
improved debugging of slowdowns.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
"Here's the latest set of Spectre and PTI related fixes and updates:
Spectre:
- Add entry code register clearing to reduce the Spectre attack
surface
- Update the Spectre microcode blacklist
- Inline the KVM Spectre helpers to get close to v4.14 performance
again.
- Fix indirect_branch_prediction_barrier()
- Fix/improve Spectre related kernel messages
- Fix array_index_nospec_mask() asm constraint
- KVM: fix two MSR handling bugs
PTI:
- Fix a paranoid entry PTI CR3 handling bug
- Fix comments
objtool:
- Fix paranoid_entry() frame pointer warning
- Annotate WARN()-related UD2 as reachable
- Various fixes
- Add Add Peter Zijlstra as objtool co-maintainer
Misc:
- Various x86 entry code self-test fixes
- Improve/simplify entry code stack frame generation and handling
after recent heavy-handed PTI and Spectre changes. (There's two
more WIP improvements expected here.)
- Type fix for cache entries
There's also some low risk non-fix changes I've included in this
branch to reduce backporting conflicts:
- rename a confusing x86_cpu field name
- de-obfuscate the naming of single-TLB flushing primitives"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
x86/entry/64: Fix CR3 restore in paranoid_exit()
x86/cpu: Change type of x86_cache_size variable to unsigned int
x86/spectre: Fix an error message
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
x86/speculation: Add <asm/msr-index.h> dependency
nospec: Move array_index_nospec() parameter checking into separate macro
x86/speculation: Fix up array_index_nospec_mask() asm constraint
x86/debug: Use UD2 for WARN()
x86/debug, objtool: Annotate WARN()-related UD2 as reachable
objtool: Fix segfault in ignore_unreachable_insn()
selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
selftests/x86/pkeys: Remove unused functions
selftests/x86: Clean up and document sscanf() usage
selftests/x86: Fix vDSO selftest segfault for vsyscall=none
x86/entry/64: Remove the unused 'icebp' macro
...
|
|
__flush_tlb_one_[user|kernel]()
flush_tlb_single() and flush_tlb_one() sound almost identical, but
they really mean "flush one user translation" and "flush one kernel
translation". Rename them to flush_tlb_one_user() and
flush_tlb_one_kernel() to make the semantics more obvious.
[ I was looking at some PTI-related code, and the flush-one-address code
is unnecessarily hard to understand because the names of the helpers are
uninformative. This came up during PTI review, but no one got around to
doing it. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big pull request for char/misc drivers for 4.16-rc1.
There's a lot of stuff in here. Three new driver subsystems were added
for various types of hardware busses:
- siox
- slimbus
- soundwire
as well as a new vboxguest subsystem for the VirtualBox hypervisor
drivers.
There's also big updates from the FPGA subsystem, lots of Android
binder fixes, the usual handful of hyper-v updates, and lots of other
smaller driver updates.
All of these have been in linux-next for a long time, with no reported
issues"
* tag 'char-misc-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (155 commits)
char: lp: use true or false for boolean values
android: binder: use VM_ALLOC to get vm area
android: binder: Use true and false for boolean values
lkdtm: fix handle_irq_event symbol for INT_HW_IRQ_EN
EISA: Delete error message for a failed memory allocation in eisa_probe()
EISA: Whitespace cleanup
misc: remove AVR32 dependencies
virt: vbox: Add error mapping for VERR_INVALID_NAME and VERR_NO_MORE_FILES
soundwire: Fix a signedness bug
uio_hv_generic: fix new type mismatch warnings
uio_hv_generic: fix type mismatch warnings
auxdisplay: img-ascii-lcd: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
uio_hv_generic: add rescind support
uio_hv_generic: check that host supports monitor page
uio_hv_generic: create send and receive buffers
uio: document uio_hv_generic regions
doc: fix documentation about uio_hv_generic
vmbus: add monitor_id and subchannel_id to sysfs per channel
vmbus: fix ABI documentation
uio_hv_generic: use ISR callback method
...
|
|
Merge updates from Andrew Morton:
- misc fixes
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
mm: remove PG_highmem description
tools, vm: new option to specify kpageflags file
mm/swap.c: make functions and their kernel-doc agree
mm, memory_hotplug: fix memmap initialization
mm: correct comments regarding do_fault_around()
mm: numa: do not trap faults on shared data section pages.
hugetlb, mbind: fall back to default policy if vma is NULL
hugetlb, mempolicy: fix the mbind hugetlb migration
mm, hugetlb: further simplify hugetlb allocation API
mm, hugetlb: get rid of surplus page accounting tricks
mm, hugetlb: do not rely on overcommit limit during migration
mm, hugetlb: integrate giga hugetlb more naturally to the allocation path
mm, hugetlb: unify core page allocation accounting and initialization
mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes
mm/memcontrol.c: make local symbol static
mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd()
include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer
mm/compaction.c: fix comment for try_to_compact_pages()
mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it
zsmalloc: use U suffix for negative literals being shifted
...
|
|
Previously we were using the ratio of the number of lru pages scanned to
the number of eligible lru pages to determine the number of slab objects
to scan. The problem with this is that these two things have nothing to
do with each other, so in slab heavy work loads where there is little to
no page cache we can end up with the pages scanned being a very low
number. This means that we reclaim next to no slab pages and waste a
lot of time reclaiming small amounts of space.
Consider the following scenario, where we have the following values and
the rest of the memory usage is in slab
Active: 58840 kB
Inactive: 46860 kB
Every time we do a get_scan_count() we do this
scan = size >> sc->priority
where sc->priority starts at DEF_PRIORITY, which is 12. The first loop
through reclaim would result in a scan target of 2 pages to 11715 total
inactive pages, and 3 pages to 14710 total active pages. This is a
really really small target for a system that is entirely slab pages.
And this is super optimistic, this assumes we even get to scan these
pages. We don't increment sc->nr_scanned unless we 1) isolate the page,
which assumes it's not in use, and 2) can lock the page. Under pressure
these numbers could probably go down, I'm sure there's some random pages
from daemons that aren't actually in use, so the targets get even
smaller.
Instead use sc->priority in the same way we use it to determine scan
amounts for the lru's. This generally equates to pages. Consider the
following
slab_pages = (nr_objects * object_size) / PAGE_SIZE
What we would like to do is
scan = slab_pages >> sc->priority
but we don't know the number of slab pages each shrinker controls, only
the objects. However say that theoretically we knew how many pages a
shrinker controlled, we'd still have to convert this to objects, which
would look like the following
scan = shrinker_pages >> sc->priority
scan_objects = (PAGE_SIZE / object_size) * scan
or written another way
scan_objects = (shrinker_pages >> sc->priority) *
(PAGE_SIZE / object_size)
which can thus be written
scan_objects = ((shrinker_pages * PAGE_SIZE) / object_size) >>
sc->priority
which is just
scan_objects = nr_objects >> sc->priority
We don't need to know exactly how many pages each shrinker represents,
it's objects are all the information we need. Making this change allows
us to place an appropriate amount of pressure on the shrinker pools for
their relative size.
Link: http://lkml.kernel.org/r/1510780549-6812-1-git-send-email-josef@toxicpanda.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Dave Chinner <david@fromorbit.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've followed up to support some generic features such
as cgroup, block reservation, linking fscrypt_ops, delivering
write_hints, and some ioctls. And, we could fix some corner cases in
terms of power-cut recovery and subtle deadlocks.
Enhancements:
- bitmap operations to handle NAT blocks
- readahead to improve readdir speed
- switch to use fscrypt_*
- apply write hints for direct IO
- add reserve_root=%u,resuid=%u,resgid=%u to reserve blocks for root/uid/gid
- modify b_avail and b_free to consider root reserved blocks
- support cgroup writeback
- support FIEMAP_FLAG_XATTR for fibmap
- add F2FS_IOC_PRECACHE_EXTENTS to pre-cache extents
- add F2FS_IOC_{GET/SET}_PIN_FILE to pin LBAs for data blocks
- support inode creation time
Bug fixs:
- sysfile-based quota operations
- memory footprint accounting
- allow to write data on partial preallocation case
- fix deadlock case on fallocate
- fix to handle fill_super errors
- fix missing inode updates of fsync'ed file
- recover renamed file which was fsycn'ed before
- drop inmemory pages in corner error case
- keep last_disk_size correctly
- recover missing i_inline flags during roll-forward
Various clean-up patches were added as well"
* tag 'f2fs-for-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (72 commits)
f2fs: support inode creation time
f2fs: rebuild sit page from sit info in mem
f2fs: stop issuing discard if fs is readonly
f2fs: clean up duplicated assignment in init_discard_policy
f2fs: use GFP_F2FS_ZERO for cleanup
f2fs: allow to recover node blocks given updated checkpoint
f2fs: recover some i_inline flags
f2fs: correct removexattr behavior for null valued extended attribute
f2fs: drop page cache after fs shutdown
f2fs: stop gc/discard thread after fs shutdown
f2fs: hanlde error case in f2fs_ioc_shutdown
f2fs: split need_inplace_update
f2fs: fix to update last_disk_size correctly
f2fs: kill F2FS_INLINE_XATTR_ADDRS for cleanup
f2fs: clean up error path of fill_super
f2fs: avoid hungtask when GC encrypted block if io_bits is set
f2fs: allow quota to use reserved blocks
f2fs: fix to drop all inmem pages correctly
f2fs: speed up defragment on sparse file
f2fs: support F2FS_IOC_PRECACHE_EXTENTS
...
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the
NFSv4 LOOKUPP operation
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall()
due to nfs_idmap_legacy_upcall() being called without an 'aux'
parameter
- Fix a refcount leak in the standard O_DIRECT error path
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations
when the user is requesting only attributes that are already up to
date in the inode cache, or is specifying the AT_STATX_DONT_SYNC
flag
- Add a module alias for the SCSI pNFS layout type
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the
RDMA transport protocol settings
- Various other RDMA bugfixes from Chuck
- pNFS block layout fixes
- Always set NFS_LOCK_LOST when a lock is lost"
* tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Fix a race between mmap() and O_DIRECT
NFS: Remove a redundant call to unmap_mapping_range()
pnfs/blocklayout: Ensure disk address in block device map
pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectors
lockd: Fix server refcounting
SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepoint
SUNRPC: Micro-optimize __rpc_execute
SUNRPC: task_run_action should display tk_callback
sunrpc: Format RPC events consistently for display
SUNRPC: Trace xprt_timer events
xprtrdma: Correct some documenting comments
xprtrdma: Fix "bytes registered" accounting
xprtrdma: Instrument allocation/release of rpcrdma_req/rep objects
xprtrdma: Add trace points to instrument QP and CQ access upcalls
xprtrdma: Add trace points in the client-side backchannel code paths
xprtrdma: Add trace points for connect events
xprtrdma: Add trace points to instrument MR allocation and recovery
xprtrdma: Add trace points to instrument memory invalidation
xprtrdma: Add trace points in reply decoder path
xprtrdma: Add trace points to instrument memory registration
..
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timer departement presents:
- A rather large rework of the hrtimer infrastructure which
introduces softirq based hrtimers to replace the spread of
hrtimer/tasklet combos which force the actual callback execution
into softirq context. The approach is completely different from the
initial implementation which you cursed at 10 years ago rightfully.
The softirq based timers have their own queues and there is no
nasty indirection and list reshuffling in the hard interrupt
anymore. This comes with conversion of some of the hrtimer/tasklet
users, the rest and the final removal of that horrible interface
will come towards the end of the merge window or go through the
relevant maintainer trees.
Note: The top commit merged the last minute bugfix for the 10 years
old CPU hotplug bug as I wanted to make sure that I fatfinger the
merge conflict resolution myself.
- The overhaul of the STM32 clocksource/clockevents driver
- A new driver for the Spreadtrum SC9860 timer
- A new driver dor the Actions Semi S700 timer
- The usual set of fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
usb/gadget/NCM: Replace tasklet with softirq hrtimer
ALSA/dummy: Replace tasklet with softirq hrtimer
hrtimer: Implement SOFT/HARD clock base selection
hrtimer: Implement support for softirq based hrtimers
hrtimer: Prepare handling of hard and softirq based hrtimers
hrtimer: Add clock bases and hrtimer mode for softirq context
hrtimer: Use irqsave/irqrestore around __run_hrtimer()
hrtimer: Factor out __hrtimer_next_event_base()
hrtimer: Factor out __hrtimer_start_range_ns()
hrtimer: Remove the 'base' parameter from hrtimer_reprogram()
hrtimer: Make remote enqueue decision less restrictive
hrtimer: Unify remote enqueue handling
hrtimer: Unify hrtimer removal handling
hrtimer: Make hrtimer_force_reprogramm() unconditionally available
hrtimer: Make hrtimer_reprogramm() unconditional
hrtimer: Make hrtimer_cpu_base.next_timer handling unconditional
hrtimer: Make the remote enqueue check unconditional
hrtimer: Use accesor functions instead of direct access
hrtimer: Make the hrtimer_cpu_base::hres_active field unconditional, to simplify the code
hrtimer: Make room in 'struct hrtimer_cpu_base'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features or user visible changes:
- fallocate: implement zero range mode
- avoid losing data raid profile when deleting a device
- tree item checker: more checks for directory items and xattrs
Notable fixes:
- raid56 recovery: don't use cached stripes, that could be
potentially changed and a later RMW or recovery would lead to
corruptions or failures
- let raid56 try harder to rebuild damaged data, reading from all
stripes if necessary
- fix scrub to repair raid56 in a similar way as in the case above
Other:
- cleanups: device freeing, removed some call indirections, redundant
bio_put/_get, unused parameters, refactorings and renames
- RCU list traversal fixups
- simplify mount callchain, remove recursing back when mounting a
subvolume
- plug for fsync, may improve bio merging on multiple devices
- compression heurisic: replace heap sort with radix sort, gains some
performance
- add extent map selftests, buffered write vs dio"
* tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (155 commits)
btrfs: drop devid as device_list_add() arg
btrfs: get device pointer from device_list_add()
btrfs: set the total_devices in device_list_add()
btrfs: move pr_info into device_list_add
btrfs: make btrfs_free_stale_devices() to match the path
btrfs: rename btrfs_free_stale_devices() arg to skip_dev
btrfs: make btrfs_free_stale_devices() argument optional
btrfs: make btrfs_free_stale_device() to iterate all stales
btrfs: no need to check for btrfs_fs_devices::seeding
btrfs: Use IS_ALIGNED in btrfs_truncate_block instead of opencoding it
Btrfs: noinline merge_extent_mapping
Btrfs: add WARN_ONCE to detect unexpected error from merge_extent_mapping
Btrfs: extent map selftest: dio write vs dio read
Btrfs: extent map selftest: buffered write vs dio read
Btrfs: add extent map selftests
Btrfs: move extent map specific code to extent_map.c
Btrfs: add helper for em merge logic
Btrfs: fix unexpected EEXIST from btrfs_get_extent
Btrfs: fix incorrect block_len in merge_extent_mapping
btrfs: Remove unused readahead spinlock
...
|
|
git://git.linux-nfs.org/projects/anna/linux-nfs
NFS-over-RDMA client updates for Linux 4.16
New features:
- xprtrdma tracepoints
Bugfixes and cleanups:
- Fix memory leak if rpcrdma_buffer_create() fails
- Fix allocating extra rpcrdma_reps for the backchannel
- Remove various unused and redundant variables and lock cycles
- Fix IPv6 support in xprt_rdma_set_port()
- Fix memory leak by calling buf_free for callback replies
- Fix "bytes registered" accounting
- Fix kernel-doc comments
- SUNRPC tracepoint cleanups for consistent information
- Optimizations for __rpc_execute()
|
|
Backchannel tasks will not have a reference to the rpc_clnt. Return -1 for
cl_clid in that case.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trondmy@gmail.com>
|
|
Clean up: Make it easier to use text search when browsing a trace
report. Other events use "status=%d".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Track RPC timeouts: report the XID and the server address to match
the content of network capture.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This includes decoding Write and Reply chunks, and fixing up inline
payloads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
These can be shared with all kernel ULPs, and more can easily be
added as needed.
Note: checkpatch.pl has some heartburn with the TRACE_DEFINE_ENUM
macros and the LIST macros. These follow the same style as other
header files under include/tracing/events , thus should be
considered acceptable exceptions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Commit 9036c10208e1 ("Btrfs: update hole handling v2") added the
FLAG_VACANCY to denote holes, however there was already a consistent way
of flagging extents which represent hole - ->block_start =
EXTENT_MAP_HOLE. And also the only place where this flag is checked is
in the fiemap code, but the block_start value is also checked and every
other place in the filesystem detects holes by using block_start
value's. So remove the extra flag. This survived a full xfstest run.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
* pm-cpufreq: (36 commits)
cpufreq: scpi: remove arm_big_little dependency
drivers: psci: remove cluster terminology and dependency on physical_package_id
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
cpufreq: intel_pstate: Add Skylake servers support
cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
cpufreq: imx6q: add 696MHz operating point for i.mx6ul
ARM: dts: imx6ul: add 696MHz operating point
cpufreq: stats: Change return type of cpufreq_stats_update() as void
powernv-cpufreq: Treat pstates as opaque 8-bit values
powernv-cpufreq: Fix pstate_to_idx() to handle non-continguous pstates
powernv-cpufreq: Add helper to extract pstate from PMSR
cpu_cooling: Remove static-power related documentation
cpufreq: imx6q: switch to Use clk_bulk_get() to refine clk operations
PM / OPP: Make local function ti_opp_supply_set_opp() static
PM / OPP: Add ti-opp-supply driver
dt-bindings: opp: Introduce ti-opp-supply bindings
cpufreq: ti-cpufreq: Add support for multiple regulators
cpufreq: ti-cpufreq: Convert to module_platform_driver
cpufreq: Add DVFS support for Armada 37xx
MAINTAINERS: add new entries for Armada 37xx cpufreq driver
...
|
|
* pm-cpufreq-thermal:
cpu_cooling: Remove static-power related documentation
cpu_cooling: Drop static-power related stuff
cpu_cooling: Keep only one of_cpufreq*cooling_register() helper
cpu_cooling: Remove unused cpufreq_power_cooling_register()
cpu_cooling: Make of_cpufreq_power_cooling_register() parse DT
|
|
Currently hrtimer callback functions are always executed in hard interrupt
context. Users of hrtimers, which need their timer function to be executed
in soft interrupt context, make use of tasklets to get the proper context.
Add additional hrtimer clock bases for timers which must expire in softirq
context, so the detour via the tasklet can be avoided. This is also
required for RT, where the majority of hrtimer is moved into softirq
hrtimer context.
The selection of the expiry mode happens via a mode bit. Introduce
HRTIMER_MODE_SOFT and the matching combinations with the ABS/REL/PINNED
bits and update the decoding of hrtimer_mode in tracepoints.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-27-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The 'hrtimer_start' tracepoint lacks the mode information. The mode is
important because consecutive starts can switch from ABS to REL or from
PINNED to non PINNED.
Append the mode field.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-10-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
account
So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as
well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for
detecting the ABS or REL timer modes is not valid anymore, it got broken
by the introduction of HRTIMER_MODE_PINNED.
HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the
sake of completeness print all given modes.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As of now, there're two sk_family are traced with sock:inet_sock_set_state,
which are AF_INET and AF_INET6.
So the sk_family are exposed as well.
Then we can conveniently use it to do the filter.
Both sk_family and sk_protocol are showed in the printk message, so we need
not expose them as tracepoint arguments.
Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Suggested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
