summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-02-26staging: speakup: Note that simple_strtoul can't simply be replaced by kstrtoulSamuel Thibault3-0/+4
We often receive patches which erroneously try to use kstrtoul in these places. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: comedi: ni_tio: Allocate shadow regs for each counter chipIan Abbott2-28/+47
The "ni_tio" module contains code to allocate, destroy and operate on a `struct ni_gpct_device`, which represents a number of counters spread over one or more blocks (or "chips"). `struct ni_gpct_device` includes an array member `regs` holding shadow copies of register values. Unfortunately, this is currently shared by each block of counters so they interfere with each other. This is a problem for the "ni_660x" module, which has 8 counters spread over 2 blocks. The `regs` storage needs to be two-dimensional, indexed by block (chip) number and register number. (It does not need to be three-dimensional because the registers for individual counters are intermingled within the block.) Change the `regs` member to an array pointer that can be indexed like a two-dimensional array to access the shadow storage for each register in each block. Allocate the storage in `ni_gpct_device_construct()` and free it in `ni_gpct_device_destroy()`. (`ni_gpct_device_construct()` can determine the number of blocks from the `num_counters` and `counters_per_chip` parameters.) Add new member `num_chips` to hold the number of chips. Use that to check that `chip_index` value is in range in the same places that check the register offset is in range. Remove the `counters_per_chip` member of `struct ni_gpct_device` as it is not needed anywhere and could be easily derived from the `num_counters` and `num_chips` members if required. Thanks to GitHub user "raabej" (real name unknown) for an initial implementation of this in the out-of-tree fork of the Comedi drivers. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: android: ashmem: Avoid range_alloc() allocation with ashmem_mutex held.Tetsuo Handa1-18/+24
ashmem_pin() is calling range_shrink() without checking whether range_alloc() succeeded. Also, doing memory allocation with ashmem_mutex held should be avoided because ashmem_shrink_scan() tries to hold it. Therefore, move memory allocation for range_alloc() to ashmem_pin_unpin() and make range_alloc() not to fail. This patch is mostly meant for backporting purpose for fuzz testing on stable/distributor kernels, for there is a plan to remove this code in near future. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable@vger.kernel.org Reviewed-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: wilc1000: fix incorrent type assignmentBo YU1-2/+2
Fix sparse warning: drivers/staging/wilc1000/host_interface.c:450:30: warning: incorrect type in assignment (different base types) drivers/staging/wilc1000/host_interface.c:450:30: expected restricted __le16 [usertype] beacon_period drivers/staging/wilc1000/host_interface.c:450:30: got unsigned short [usertype] beacon_interval drivers/staging/wilc1000/host_interface.c:451:25: warning: incorrect type in assignment (different base types) drivers/staging/wilc1000/host_interface.c:451:25: expected restricted __le16 [usertype] cap_info drivers/staging/wilc1000/host_interface.c:451:25: got unsigned short [usertype] capability Signed-off-by: Bo YU <tsu.yubo@gmail.com> Reviewed-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: greybus: Alignment should match open parenthesisBhanusree Pola3-3/+3
Clean checkpatch.pl issue in various files: CHECK: Alignment should match open parenthesis Adjust parameters to match alignment with open paranthesis Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: greybus: Blank lines not required before '}'Bhanusree Pola1-1/+0
Remove blank line to resolve checkpatch.pl issue: CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: greybus: Do not use multiple blank linesBhanusree Pola1-1/+0
Remove unnecessary blank line issue found with checkpatch.pl: CHECK: Please don't use multiple blank lines Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: ks7010: Match alignments with open parenthesisBhanusree Pola1-1/+1
Adjust parameters of "netdev_dbg" to match alignment with open parenthesis. Issue found using checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: vt6655: Alignment should match open parenthesisMadhumitha Prabakaran1-1/+1
Fix the check to improve readibility. CHECK: Alignment should match open parenthesis Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fwserial: Add blank line after declarationsBhanusree Pola1-0/+1
Add blank line after the structure declaration, struct fwtty_port *port = tty->driver_data; Issue found using checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fbtft: Fix line over 80 charactersBhanusree Pola1-3/+3
Fix the checkpatch.pl warning: WARNING:line over 80 characters Move Parameters to the next lines with proper alignment Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fbtft: Extra blank line not required before '}'Bhanusree Pola1-1/+0
Remove unnecesessary extra blank line before the closing brace, to solve the checkpatch.pl check: CHECK: Extra blank line not required before closing brace '}' Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: fbtft: Alignment should match open parenthesisBhanusree Pola2-2/+2
Clear the warning found by checkpatch.pl WARNING:Alignment should match open parenthesis Adjust paremeters in fbtft_par_dbg and write_reg. Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: netlogic: Remove boilerplate license textBhagyashri Dighole4-117/+2
Removes the boilerplate license text. Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: netlogic: Add SPDX-License-Identifier tag at the topBhagyashri Dighole4-2/+6
Adds the SPDX GPL-2.0 or BSD-2-clause license identifier, which solves the checkpatch.pl warnings: "WARNING: Missing or malformed SPDX-License-Identifier tag in line 1". Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26staging: netlogic: Modify coding style alignmentsBhagyashri Dighole1-8/+12
Fix coding style alignment issues detected by checkpatch.pl Match alignments with parenthesis. Limit lines to 80 characters. Signed-off-by: Bhagyashri Dighole <digholebhagyashri@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: mt761-dma: Alignment should match open parenthesisBhanusree Pola1-1/+1
Adjust "dev_dbg" parameters to match alignment with open parenthesis Issue found with checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26Staging: mt7621_dma: Prefer unsigned int over just unsignedBhanusree Pola1-1/+1
Replace 'unsigned' with 'unsigned int' to be specific with data type. Issue found with checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21staging: octeon-usb: fix misspelled "re-enable"Sumit Pundir1-1/+1
Fixes misspelled "re-enable" in comment. Reported by checkpatch.pl Signed-off-by: Sumit Pundir <pundirsumit11@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21staging: rtlwifi: Use proper enum for return in halmac_parse_psd_data_88xxNathan Chancellor1-1/+1
Clang warns: drivers/staging/rtlwifi/halmac/halmac_88xx/halmac_func_88xx.c:2472:11: warning: implicit conversion from enumeration type 'enum halmac_cmd_process_status' to different enumeration type 'enum halmac_ret_status' [-Wenum-conversion] return HALMAC_CMD_PROCESS_ERROR; ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. Fix this by using the proper enum for allocation failures, HALMAC_RET_MALLOC_FAIL, which is used in the rest of this file. Fixes: e4b08e16b7d9 ("staging: r8822be: check kzalloc return or bail") Link: https://github.com/ClangBuiltLinux/linux/issues/375 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21Staging: rtl8192e: Replace license text with SPDX identifierBhanusree Pola1-8/+1
- adds the SPDX GPL-2.0 license identifier which solves the checkpatch.pl warning - Removed license boilerplate text - Issue found with checkpatch.pl warning: "WARNING: Missing or malformed SPDX-License-Identifier tag in line 1" Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20staging: erofs: remove rcu_read_lock() in erofs_try_to_free_cached_pageGao Xiang1-11/+5
page_private(page) cannot be changed if page lock is taken. Besides, the corresponding workgroup won't be freed if the page is already protected by page lock, therefore no need to take rcu read lock. Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20staging: erofs: fix race of initializing xattrs of a inode at the same timeGao Xiang2-15/+37
In real scenario, there could be several threads accessing xattrs of the same xattr-uninitialized inode, and init_inode_xattrs() almost at the same time. That's actually an unexpected behavior, this patch closes the race. Fixes: b17500a0fdba ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: visornic: use skb_put_zero() instead of open-coded versionJann Horn1-3/+1
Replace an open-coded version of skb_put_zero() with a call to the helper. This is a cleanup and is also useful for potentially adding KASAN integration to SKBs in the future. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: erofs: match alignment with open parenthesesBhanusree Pola1-4/+4
Align code with open parantheses to improve the readability. Issue found using checkpatch.pl Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Reviewed-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: android: ashmem: Don't call fallocate() with ashmem_mutex held.Tetsuo Handa1-5/+20
syzbot is hitting lockdep warnings [1][2][3]. This patch tries to fix the warning by eliminating ashmem_shrink_scan() => {shmem|vfs}_fallocate() sequence. [1] https://syzkaller.appspot.com/bug?id=87c399f6fa6955006080b24142e2ce7680295ad4 [2] https://syzkaller.appspot.com/bug?id=7ebea492de7521048355fc84210220e1038a7908 [3] https://syzkaller.appspot.com/bug?id=e02419c12131c24e2a957ea050c2ab6dcbbc3270 Reported-by: syzbot <syzbot+a76129f18c89f3e2ddd4@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+148c2885d71194f18d28@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+4b8b031b89e6b96c4b2e@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable@vger.kernel.org Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-mmc: Prefer using BIT macroBhanusree Pola1-1/+1
Use BIT(x) instead of (1<<x), reported by checkpatch.pl. Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtlwifi: Remove set but not used variables 'dataempty, hoffset'YueHaibing1-4/+2
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtlwifi/efuse.c: In function 'efuse_pg_packet_write': drivers/staging/rtlwifi/efuse.c:922:24: warning: variable 'dataempty' set but not used [-Wunused-but-set-variable] drivers/staging/rtlwifi/efuse.c: In function 'efuse_get_current_size': drivers/staging/rtlwifi/efuse.c:1185:5: warning: variable 'hoffset' set but not used [-Wunused-but-set-variable] They're never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-mmc: Remove unused including <linux/version.h>YueHaibing1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtl8188eu: fix bad indentation for conditional statementStephen Martin1-1/+1
Fixed else block indentation Signed-off-by: Stephen Martin <lockwood@opperline.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: vt6656: key: Mark expected switch fall-throughsGustavo A. R. Silva1-1/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/staging/vt6656/key.c: In function ‘vnt_set_keymode’: drivers/staging/vt6656/key.c:70:19: warning: this statement may fall through [-Wimplicit-fallthrough=] key->hw_key_idx = entry; ~~~~~~~~~~~~~~~~^~~~~~~ drivers/staging/vt6656/key.c:71:2: note: here case VNT_KEY_ALLGROUP: ^~~~ drivers/staging/vt6656/key.c:73:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (onfly_latch) ^ drivers/staging/vt6656/key.c:75:2: note: here case VNT_KEY_GROUP_ADDRESS: ^~~~ drivers/staging/vt6656/key.c:76:12: warning: this statement may fall through [-Wimplicit-fallthrough=] key_mode |= mode; ~~~~~~~~~^~~~~~~ drivers/staging/vt6656/key.c:77:2: note: here case VNT_KEY_GROUP: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtl8192e: Remove set but not used variables 'broad_addr, stype'YueHaibing1-12/+3
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8192e/rtl8192e/rtl_core.c: In function '_rtl92e_tx': drivers/staging/rtl8192e/rtl8192e/rtl_core.c:1732:28: warning: variable 'broad_addr' set but not used [-Wunused-but-set-variable] drivers/staging/rtl8192e/rtl8192e/rtl_core.c:1731:24: warning: variable 'stype' set but not used [-Wunused-but-set-variable] This remove unnessesary bool variable 'multi_addr, broad_addr, uni_addr' Also 'stype' never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: reverse condition to check for enabled portSergio Paracuellos1-1/+1
Each enabled port is being checked in 'mt7621_pcie_enable_ports" function calling 'mt7621_pcie_enable_port'. The return value for this function on success is zero, so the check is reversed. Fix it. Fixes: 802a2f7b2fe3: staging: mt7621-pci: factor out 'mt7621_pcie_enable_port' function Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: remove two register writesSergio Paracuellos1-4/+0
There is no need to write IO and memory space window Host PCI bridge registers before doing anything else. Just use its default values which should be ok. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: replace spaces with tabs in commentSergio Paracuellos1-9/+9
To properly follow kernel style replace spaces with tabs in comment where link status bits are explained. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: remove not used definitionsSergio Paracuellos1-2/+0
There are two definitions which are not being used at all. Remove them. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-dts: add general pcie reset line to pcie bindingsSergio Paracuellos1-2/+2
Add general pci reset line to pcie bindings to use reset_control properly in driver code. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci: add reset control for general pcie resetSergio Paracuellos1-5/+10
There is still a reset line which is not being handled using reset_control properly and just being accessing writing registers. Use reset_control instead for pcie general reset line. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: rtlwifi: fix spelling mistake: "Hightest" -> "Highest"Colin Ian King1-1/+1
Trivial fix to spelling mistake in ODM_RT_TRACE message text, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-pci-phy: use 'module_init' instead of 'arch_initcall'Sergio Paracuellos1-1/+1
Init driver as 'arch_initcall()' does not work. It causes phy_create() to be called before the phy module is initialized, so 'phy_class' is NULL, the new phy isn't placed in the right class, and it cannot be found. Change to 'module_init()' which works properly in this case. Fixes: 00981d31d6df: staging: mt7621-pci-phy: add new driver for phy part of mt7621-pci Reported-by: NeilBrown <neil@brown.name> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: mt7621-dts: fix pci phy register addressesSergio Paracuellos1-4/+4
Both pci-phy0 and pci-phy1 are using bad addresses to search for its registers. Use proper register values. Fixes: 06184ba5a33a: staging: mt7621-dts: add pci-phy related bindings to board's device tree Reported-by: NeilBrown <neil@brown.name> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: r8822be: check kzalloc return or bailNicholas Mc Guire1-1/+4
The kzalloc() in halmac_parse_psd_data_88xx() can fail and return NULL so check the psd_set->data after allocation and if allocation failed return HALMAC_CMD_PROCESS_ERROR. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: 938a0447f094 ("staging: r8822be: Add code for halmac sub-drive") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19staging: android: ion: fix sys heap pool's gfp_flagsQing Xia1-1/+1
In the first loop, gfp_flags will be modified to high_order_gfp_flags, and there will be no chance to change back to low_order_gfp_flags. Fixes: e7f63771b60e ("ION: Sys_heap: Add cached pool to spead up cached buffer alloc") Signed-off-by: Qing Xia <saberlily.xia@hisilicon.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jing Xia <jing.xia@unisoc.com> Reviewed-by: Yuming Han <yuming.han@unisoc.com> Reviewed-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Reviewed-by: Orson Zhai <orson.zhai@unisoc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14staging: erofs: keep corrupted fs from crashing kernel in erofs_namei()Gao Xiang1-86/+97
As Al pointed out, " ... and while we are at it, what happens to unsigned int nameoff = le16_to_cpu(de[mid].nameoff); unsigned int matched = min(startprfx, endprfx); struct qstr dname = QSTR_INIT(data + nameoff, unlikely(mid >= ndirents - 1) ? maxsize - nameoff : le16_to_cpu(de[mid + 1].nameoff) - nameoff); /* string comparison without already matched prefix */ int ret = dirnamecmp(name, &dname, &matched); if le16_to_cpu(de[...].nameoff) is not monotonically increasing? I.e. what's to prevent e.g. (unsigned)-1 ending up in dname.len? Corrupted fs image shouldn't oops the kernel.. " Revisit the related lookup flow to address the issue. Fixes: d72d1ce60174 ("staging: erofs: add namei functions") Cc: <stable@vger.kernel.org> # 4.19+ Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14staging: rtl8192e: rename macro arguments to avoid camel case - styleHimadri Pandya1-15/+15
Rename following macro arguments to fix checkpatch warning: Avoid CamelCase and make the arguments more readable, understandable. __pIeeeDev -> __ieee_dev __pTa -> __address Signed-off-by: Himadri Pandya <himadri18.07@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14staging: android: ion: Add the GPL exception for syscallsHyun Kwon1-1/+1
Add "WITH Linux-syscall-note" to the license to not put GPL restrictions on user space programs using this header. Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14staging: erofs: fix memleak of inode's shared xattr arraySheng Yong1-1/+4
If it fails to read a shared xattr page, the inode's shared xattr array is not freed. The next time the inode's xattr is accessed, the previously allocated array is leaked. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Fixes: b17500a0fdba ("staging: erofs: introduce xattr & acl support") Cc: <stable@vger.kernel.org> # 4.19+ Reviewed-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13staging: rtl8192e: rename function cpMacAddr to copy_mac_addr - styleHimadri Pandya1-2/+2
Rename function cpMacAddr to copy_mac_addr in order to fix checkpatch warning: Avoid CamelCase and make the function name more readable, understandable. Signed-off-by: Himadri Pandya <himadri18.07@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13staging: comedi: ni_660x: fix missing break in switch statementGustavo A. R. Silva1-0/+1
Add missing break statement in order to prevent the code from falling through to the default case and return -EINVAL every time. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: aa94f2888825 ("staging: comedi: ni_660x: tidy up ni_660x_set_pfi_routing()") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13Merge tag 'iio-for-5.1b' of ↵Greg Kroah-Hartman25-71/+1480
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of new device support, features and cleanup for IIO in the 5.1 cycle. There are a few late breaking fixes in here that weren't worth trying to rush into 5.0 as they have been with us for quite a while. New device support * ad7476 - add support for TI ADS786X parts that are compatible with this Analog Devices driver. Good to see some simple devices are so similar. * Ingenic jz47xx SoC ADCs - new driver and bindings * Plantower PMS7003 partical sensor - new driver and bindings including vendor prefix. * TI DAC7612 - new driver and bindings for this dual DAC. New features * ad7768-1 - Sampling frequency control * bmi160 - Data ready trigger support, including open-drain dt binding. Cleanup / minor fixes. * Analog Device DACs - Fix some inconsistent licenses. These are only ones where there were two different license marked in the same file, and hence were previously unclear. * ads124s08 - Spelling fix. * adxl345 - Parameter alignement tidy up. * bmi160 - SPDX - correct a note on the types of supported interrupts which was too strict. - use iio_pollfunc_store_time to grab an earlier timestamp. - use if (ret) instead of if (ret < 0) to be consistent whilst simplifying some handling where ret was effectively getting written to 0 even though it was always already 0. * exynos_adc - Fix a null pointer dereference on unbind. - Fix number of channels on Exynos4x12 devices to be 4 rather than 8. * lpc32xx-adc - Move DT bindings doc out of staging. Oops, I missed this one when moving the driver. - SPDX. * npcm-adc - drop documentation of reset node as going to be done differently. It's a new driver this cycle so no need to support the previous binding going forwards. * sps30 - Fix an issue with a loop timeout test that meant it would never identify a timeout. - Mark deliberate switch fall throughs. * tag 'iio-for-5.1b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (26 commits) iio: adc: exynos-adc: Use proper number of channels for Exynos4x12 dt-binding: iio: remove rst node from NPCM ADC document dt-bindings: iio: chemical: pms7003: add device tree support dt-bindings: add Plantower to the vendor prefixes iio: chemical: add support for Plantower PMS7003 sensor iio:chemical:sps30 Supress some switch fallthrough warnings. iio:adc:lpc32xx use SPDX-License-Identifier dt-bindings: iio: adc: move lpc32xx-adc out of staging iio: adc: ads124s08: fix spelling mistake "converions" -> "conversions" iio: adc: exynos-adc: Fix NULL pointer exception on unbind iio: chemical: sps30: fix a loop timeout test iio:accel:adxl345: Change alignment to match paranthesis iio:dac:dac7612: device tree bindings iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612 iio: adc: ad7476: Add support for TI ADS786X ADCs iio: adc: ad7768-1: Add support for setting the sampling frequency drivers: iio: dac: Fix wrong license for ADI drivers IIO: add Ingenic JZ47xx ADC driver. dt-bindings: iio/adc: Add bindings for Ingenic JZ47xx SoCs ADC. dt-bindings: iio/adc: Add docs for Ingenic JZ47xx SoCs ADC. ...