summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2017-11-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: - The final conversion of timer wheel timers to timer_setup(). A few manual conversions and a large coccinelle assisted sweep and the removal of the old initialization mechanisms and the related code. - Remove the now unused VSYSCALL update code - Fix permissions of /proc/timer_list. I still need to get rid of that file completely - Rename a misnomed clocksource function and remove a stale declaration * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) m68k/macboing: Fix missed timer callback assignment treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts timer: Remove redundant __setup_timer*() macros timer: Pass function down to initialization routines timer: Remove unused data arguments from macros timer: Switch callback prototype to take struct timer_list * argument timer: Pass timer_list pointer to callbacks unconditionally Coccinelle: Remove setup_timer.cocci timer: Remove setup_*timer() interface timer: Remove init_timer() interface treewide: setup_timer() -> timer_setup() (2 field) treewide: setup_timer() -> timer_setup() treewide: init_timer() -> setup_timer() treewide: Switch DEFINE_TIMER callbacks to struct timer_list * s390: cmm: Convert timers to use timer_setup() lightnvm: Convert timers to use timer_setup() drivers/net: cris: Convert timers to use timer_setup() drm/vc4: Convert timers to use timer_setup() block/laptop_mode: Convert timers to use timer_setup() net/atm/mpc: Avoid open-coded assignment of timer callback function ...
2017-11-22Merge tag 'rtc-4.15' of ↵Linus Torvalds24-275/+1815
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is nothing scary this cycle, mostly driver fixes and updates. The core fix has been in for a while and has been tested on multiple kernel revisions by multiple teams. Core: - Fix setting the alarm to the next expiring timer New drivers: - Mediatek MT7622 RTC - NXP PCF85363 - Spreadtrum SC27xx PMIC RTC Drivers updates: - Use generic nvmem to expose the Non volatile ram for ds1305, ds1511, m48t86 and omap - abx80x: solve possible race condition at probe - armada38x: support trimming the RTC oscillator - at91rm9200: fix reading the alarm value at boot - ds1511: allow waking platform - m41t80: rework square wave output - pcf8523: support trimming the RTC oscillator - pcf8563: fix clock output rate - pl031: make interrupt optional - xgene: fix suspend/resume" * tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) dt-bindings: rtc: imxdi: Improve the bindings text rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation rtc: at91rm9200: fix reading alarm value rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm rtc: sysfs: Use time64_t variables to set time/alarm rtc: xgene: mark PM functions as __maybe_unused rtc: xgene: Fix suspend/resume rtc: pcf8563: don't alway enable the alarm rtc: pcf8563: fix output clock rate rtc: rx8010: Fix for incorrect return value rtc: rx8010: Specify correct address for RX8010_RESV31 rtc: rx8010: Remove duplicate define rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate rtc: m41t80: fix m41t80_sqw_round_rate return value rtc: m41t80: m41t80_sqw_set_rate should return 0 on success rtc: add support for NXP PCF85363 real-time clock rtc: omap: Support scratch registers ...
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook1-3/+3
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-20rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driverBaolin Wang3-0/+674
This patch adds the Spreadtrum RTC driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-13Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-15/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-10rtc: at91rm9200: fix reading alarm valueAlexandre Belloni1-12/+6
When alarm value is read at boot time, at91_alarm_year is not yet set to the proper value so the year is always set to 1900. This results in that kind of message at boot: rtc rtc0: invalid alarm value: 1900-1-14 2:11:39 There is no way to recover from that as the alarm is now only read when booting. Instead, rely on the rtc core to figure out the proper year. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-10rtc: at91rm9200: stop calculating yday in at91_rtc_readalarmAlexandre Belloni1-1/+0
Calculating yday in the read_alarm callback is useless as this value is never used later. Also, it was buggy anyway because at the time this is done, tm_year is always 0 as the alarm register doesn't hold the year. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-10rtc: sysfs: Use time64_t variables to set time/alarmBaolin Wang1-12/+13
Use time64_t variables and related APIs for sysfs interfaces to support setting time or alarm after the year 2038 on 32-bit system. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09rtc: xgene: mark PM functions as __maybe_unusedArnd Bergmann1-4/+2
The new xgene_rtc_alarm_irq_enabled() function is only accessed from PM code, which is inside of an #ifdef; this causes a harmless build warning when CONFIG_PM is disabled: drivers/rtc/rtc-xgene.c:108:12: error: 'xgene_rtc_alarm_irq_enabled' defined but not used [-Werror=unused-function] Just remove the #ifdef and use __maybe_unused annotations instead, to make the code more robust here. Fixes: d0bcd82b1379 ("rtc: xgene: Fix suspend/resume") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Loc Ho <lho@apm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09rtc: xgene: Fix suspend/resumeLoc Ho1-9/+32
This patch fixes suspend/resume functions properly for the APM X-Gene SoC RTC driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09rtc: pcf8563: don't alway enable the alarmAlexandre Belloni1-1/+1
Allow setting the alarm and later enable it instead of enabling it unconditionally. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09rtc: pcf8563: fix output clock ratePhilipp Zabel1-1/+1
The pcf8563_clkout_recalc_rate function erroneously ignores the frequency index read from the CLKO register and always returns 32768 Hz. Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09rtc: rx8010: Fix for incorrect return valueAkshay Bhat1-2/+2
The err variable is not being reset after a successful read. Explicitly return 0 at the end of function call to account for all return paths. Reported-by: Jens-Peter Oswald <oswald@lre.de> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: rx8010: Specify correct address for RX8010_RESV31Akshay Bhat1-1/+1
Define for reserved register 31 had the incorrect address. Specify the correct address. Reported-by: Jens-Peter Oswald <oswald@lre.de> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: rx8010: Remove duplicate defineAkshay Bhat1-1/+0
Remove duplicate define for RX8010_YEAR Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rateTroy Kisky1-11/+6
m41t80_sqw_set_rate will be called with the result from m41t80_sqw_round_rate, so might as well make m41t80_sqw_set_rate(n) same as m41t80_sqw_set_rate(m41t80_sqw_round_rate(n)) As Russell King wrote[1], "clk_round_rate() is supposed to tell you what you end up with if you ask clk_set_rate() to set the exact same value you passed in - but clk_round_rate() won't modify the hardware." [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2012-January/080175.html Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: m41t80: avoid i2c read in m41t80_sqw_is_preparedTroy Kisky1-9/+6
This is a little more efficient and avoids the warning WARNING: possible circular locking dependency detected 4.14.0-rc7-00010 #16 Not tainted ------------------------------------------------------ kworker/2:1/70 is trying to acquire lock: (prepare_lock){+.+.}, at: [<c049300c>] clk_prepare_lock+0x80/0xf4 but task is already holding lock: (i2c_register_adapter){+.+.}, at: [<c0690b04>] i2c_adapter_lock_bus+0x14/0x18 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (i2c_register_adapter){+.+.}: rt_mutex_lock+0x44/0x5c i2c_adapter_lock_bus+0x14/0x18 i2c_transfer+0xa8/0xbc i2c_smbus_xfer+0x20c/0x5d8 i2c_smbus_read_byte_data+0x38/0x48 m41t80_sqw_is_prepared+0x18/0x28 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rateTroy Kisky1-11/+17
This is a little more efficient, and avoids the warning WARNING: possible circular locking dependency detected 4.14.0-rc7-00007 #14 Not tainted ------------------------------------------------------ alsactl/330 is trying to acquire lock: (prepare_lock){+.+.}, at: [<c049300c>] clk_prepare_lock+0x80/0xf4 but task is already holding lock: (i2c_register_adapter){+.+.}, at: [<c0690ae0>] i2c_adapter_lock_bus+0x14/0x18 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (i2c_register_adapter){+.+.}: rt_mutex_lock+0x44/0x5c i2c_adapter_lock_bus+0x14/0x18 i2c_transfer+0xa8/0xbc i2c_smbus_xfer+0x20c/0x5d8 i2c_smbus_read_byte_data+0x38/0x48 m41t80_sqw_recalc_rate+0x24/0x58 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: m41t80: fix m41t80_sqw_round_rate return valueTroy Kisky1-12/+7
Previously it was returning the best of 32768, 8192, 1024, 64, 2, 0 Now, best of 32768, 8192, 4096, 2048, 1024, 512, 256, 128, 64, 32, 16, 8, 4, 2, 1, 0 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: m41t80: m41t80_sqw_set_rate should return 0 on successTroy Kisky1-4/+1
Previously it was returning -EINVAL upon success. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: add support for NXP PCF85363 real-time clockEric Nelson3-0/+234
Note that alarms are not currently implemented. 64 bytes of nvmem is supported and exposed in sysfs (# is the instance number, starting with 0): /sys/bus/nvmem/devices/pcf85363-#/nvmem Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08rtc: omap: Support scratch registersAlexandre Belloni1-0/+45
Register an nvmem device to expose the 3 scratch registers (total of 12 bytes) to both userspace and kernel space. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31rtc: omap: switch to rtc_register_deviceAlexandre Belloni1-2/+7
This removes a possible race condition and crash and allows for further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-31rtc: omap: fix error path when pinctrl_register failsAlexandre Belloni1-1/+2
If pinctrl_register() fails probe will return with an error without locking the RTC and disabling pm_runtime. Set ret and jump to err instead. Fixes: 97ea1906b3c2 ("rtc: omap: Support ext_wakeup configuration") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-30rtc: Allow rtc drivers to specify the tv_nsec value for ntpJason Gunthorpe2-15/+41
ntp is currently hardwired to try and call the rtc set when wall clock tv_nsec is 0.5 seconds. This historical behaviour works well with certain PC RTCs, but is not universal to all rtc hardware. Change how this works by introducing the driver specific concept of set_offset_nsec, the delay between current wall clock time and the target time to set (with a 0 tv_nsecs). For x86-style CMOS set_offset_nsec should be -0.5 s which causes the last second to be written 0.5 s after it has started. For compat with the old rtc_set_ntp_time, the value is defaulted to + 0.5 s, which causes the next second to be written 0.5s before it starts, as things were before this patch. Testing shows many non-x86 RTCs would like set_offset_nsec ~= 0, so ultimately each RTC driver should set the set_offset_nsec according to its needs, and non x86 architectures should stop using update_persistent_clock64 in order to access this feature. Future patches will revise the drivers as needed. Since CMOS and RTC now have very different handling they are split into two dedicated code paths, sharing the support code, and ifdefs are replaced with IS_ENABLED. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-10-27rtc: ds1390: Add OF device ID tableAlexandre Belloni1-0/+7
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. Worse, the compatible is documented but doesn't currently match the driver. Add the proper compatible to the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-26rtc: ds1307: add OF and ACPI entries for Epson RX8130Bastian Stender1-0/+5
Make Epson RX8130 device tree and ACPI aware. Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE") Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-26rtc: mediatek: enhance the description for MediaTek PMIC based RTCSean Wang1-4/+4
Give a better description for original MediaTek RTC driver as PMIC based RTC in order to distinguish SoC based RTC. Also turning all words with Mediatek to MediaTek here. Cc: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-26rtc: mediatek: add driver for RTC on MT7622 SoCSean Wang3-0/+433
This patch introduces the driver for the RTC on MT7622 SoC. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-25rtc: pcf8523: add support for trimming the RTC oscillatorRussell King1-0/+40
Add support for reading and writing the RTC offset register, converting it to the corresponding parts-per-billion value. When setting the drift, the PCF8523 has two modes: one applies the adjustment every two hours, the other applies the adjustment every minute. We select between these two modes according to which ever gives the closest PPB value to the one requested. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-25rtc: armada38x: add support for trimming the RTCRussell King1-0/+101
Add support for trimming the RTC using the offset mechanism. This RTC supports two modes: low update mode and high update mode. Low update mode has finer precision than high update mode, so we use the low mode where possible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-25rtc: clarify the RTC offset correctionRussell King1-0/+4
The RTC offset correction documentation is not very clear about the exact relationship between "offset" and the effect it has on the RTC. Supplement the documentation with an equation giving the relationship. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: ds1511: use generic nvmemAlexandre Belloni1-36/+22
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: ds1511: allow waking platformAlexandre Belloni1-9/+1
Disabling interrupts when removing the driver is bad practice as this will prevent some platform from waking up when using that RTC. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: ds1511: switch to rtc_register_deviceAlexandre Belloni1-2/+7
This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: abx80x: solve race conditionAlexandre Belloni1-5/+5
There is a race condition that can happen if abx80x_probe() fails after the rtc registration succeeded. Solve that by moving the registration at the end of the probe function. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: abx80x: switch to rtc_register_deviceAlexandre Belloni1-3/+7
This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: m48t86: use generic nvmemAlexandre Belloni1-25/+23
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: m48t86: switch to rtc_register_deviceAlexandre Belloni1-2/+8
This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: ds1305: use generic nvmemAlexandre Belloni1-38/+21
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-13rtc: ds1305: switch to rtc_register_deviceAlexandre Belloni1-3/+8
This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: pl031: make interrupt optionalRussell King1-6/+8
On some platforms, the interrupt for the PL031 is optional. Avoid trying to claim the interrupt if it's not specified. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: pl031: avoid exposing alarm if no interruptRussell King1-3/+12
If the RTC has no interrupt, there is little point in exposing the RTC alarm capabilities, as it can't be used as a wakeup source nor can it deliver an event to userspace. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: pl031: use devm_* for allocating memory and mapping resourceRussell King1-11/+6
Use the devm_* APIs for allocating memory and mapping the memory in the probe function to relieve the driver from having to deal with this in the cleanup paths. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: pl031: constify amba_idsRussell King1-1/+1
The AMBA device IDs should be marked const. Make that so. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: rv3029: Clean up error handling in rv3029_eeprom_write()Dan Carpenter1-8/+8
We don't need both "ret" and "err" when they do the same thing. All the functions called here return zero on success or negative error codes. It's more clear to return a literal zero at the end instead of "return ret;" Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: jz4740: fix loading of rtc driverMathieu Malaterre1-2/+2
The current timeout for waiting for WRDY is not always sufficient. Always increase it to 10000 even on JZ4740. This is technically only required on JZ4780, where the current symptoms seen after a hard reboot are: jz4740-rtc 10003000.rtc: rtc core: registered 10003000.rtc as rtc0 jz4740-rtc 10003000.rtc: Could not write to RTC registers jz4740-rtc: probe of 10003000.rtc failed with error -5 Suggested-by: Alex Smith <alex.smith@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: jz4740: remove duplicate 'write' in messageMathieu Malaterre1-1/+1
Trivial fix in error message with duplicate 'write' Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-12rtc: ds1307: improve weekday handlingHeiner Kallweit1-26/+26
The current code for checking and fixing the weekday in ds1307_probe faces some issues: - This check is applied to all chips even if its applicable (AFAIK) to mcp794xx only - The check uses MCP794XX constants for registers and bits even though it's executed also on other chips (ok, this could be fixed easily) - It relies on tm_wday being properly populated when core calls set_time and set_alarm. This is not guaranteed at all. First two issue we could solve by moving the check to the mcp794xx-specific initialization (where also VBATEN flag is set). The proposed alternative is in the set_alarm path for mcp794xx only and calculates the alarm weekday based on the current weekday in the RTC timekeeping regs and the difference between alarm date and current date. So we are fine with any weekday even if it doesn't match the date. Still there are cases where this could fail, e.g.: - rtc date/time + weekday have power-on-reset default values - alarm is set to actual date/time + x - set_time is called (may change diff between rtc weekday and actual weekday) But similar issues we have with the current code too: - rtc date/time + weekday have power-on-reset default values - alarm is set to rtc date/time + x - set_time is called before the alarm triggers Using random rtc date/time with relative alarms simply can interfere with set_time. I'm not totally convinced of either option yet. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>