summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-08-24bonding: fix macvlan over alb bond supportHangbin Liu1-3/+3
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") aims to enable the use of macvlans on top of rlb bond mode. However, the current rlb bond mode only handles ARP packets to update remote neighbor entries. This causes an issue when a macvlan is on top of the bond, and remote devices send packets to the macvlan using the bond's MAC address as the destination. After delivering the packets to the macvlan, the macvlan will rejects them as the MAC address is incorrect. Consequently, this commit makes macvlan over bond non-functional. To address this problem, one potential solution is to check for the presence of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev) and return NULL in the rlb_arp_xmit() function. However, this approach doesn't fully resolve the situation when a VLAN exists between the bond and macvlan. So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit(). As the comment said, Don't modify or load balance ARPs that do not originate locally. Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") Reported-by: susan.zheng@veritas.com Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-23ibmveth: Use dcbf rather than dcbflMichael Ellerman1-1/+1
When building for power4, newer binutils don't recognise the "dcbfl" extended mnemonic. dcbfl RA, RB is equivalent to dcbf RA, RB, 1. Switch to "dcbf" to avoid the build error. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-23i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()Andrii Staikov1-2/+3
Add check for pf->vf not being NULL before dereferencing pf->vf[vsi->vf_id] in updating VSI filter sync. Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted in the condition for clearing promisc mode bit. Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning") Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-22igc: Fix the typo in the PTM Control macroSasha Neftin1-1/+1
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM requests. The bit resolution of this field is six bits. That bit five was missing in the mask. This patch comes to correct the typo in the IGC_PTM_CTRL_SHRT_CYC macro. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-22igb: Avoid starting unnecessary workqueuesAlessio Igor Bogani1-12/+12
If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting PTP related workqueues. In this way we can fix this: BUG: unable to handle page fault for address: ffffc9000440b6f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0 Oops: 0000 [#1] PREEMPT SMP [...] Workqueue: events igb_ptp_overflow_check RIP: 0010:igb_rd32+0x1f/0x60 [...] Call Trace: igb_ptp_read_82580+0x20/0x50 timecounter_read+0x15/0x60 igb_ptp_overflow_check+0x1a/0x50 process_one_work+0x1cb/0x3c0 worker_thread+0x53/0x3f0 ? rescuer_thread+0x370/0x370 kthread+0x142/0x160 ? kthread_associate_blkcg+0xc0/0xc0 ret_from_fork+0x1f/0x30 Fixes: 1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.") Fixes: d339b1331616 ("igb: add PTP Hardware Clock code") Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-22Merge branch '100GbE' of ↵Jakub Kicinski5-33/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-08-21 (ice) This series contains updates to ice driver only. Jesse fixes an issue on calculating buffer size. Petr Oros reverts a commit that does not fully resolve VF reset issues and implements one that provides a fuller fix. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix NULL pointer deref during VF reset Revert "ice: Fix ice VF reset during iavf initialization" ice: fix receive buffer size miscalculation ==================== Link: https://lore.kernel.org/r/20230821171633.2203505-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-22bnx2x: new flag for track HW resource allocationThinh Tran4-28/+44
While injecting PCIe errors to the upstream PCIe switch of a BCM57810 NIC, system hangs/crashes were observed. After several calls to bnx2x_tx_timout() complete, bnx2x_nic_unload() is called to free up HW resources and bnx2x_napi_disable() is called to release NAPI objects. Later, when the EEH driver calls bnx2x_io_slot_reset() to complete the recovery process, bnx2x attempts to disable NAPI again by calling bnx2x_napi_disable() and freeing resources which have already been freed, resulting in a hang or crash. Introduce a new flag to track the HW resource and NAPI allocation state, refactor duplicated code into a single function, check page pool allocation status before freeing, and reduces debug output when a TX timeout event occurs. Reviewed-by: Manish Chopra <manishc@marvell.com> Tested-by: Abdul Haleem <abdhalee@in.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20230818161443.708785-2-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-22sfc: allocate a big enough SKB for loopback selftest packetEdward Cree3-3/+3
Cited commits passed a size to alloc_skb that was only big enough for the actual packet contents, but the following skb_put + memcpy writes the whole struct efx_loopback_payload including leading and trailing padding bytes (which are then stripped off with skb_pull/skb_trim). This could cause an skb_over_panic, although in practice we get saved by kmalloc_size_roundup. Pass the entire size we use, instead of the size of the final packet. Reported-by: Andy Moreton <andy.moreton@amd.com> Fixes: cf60ed469629 ("sfc: use padding to fix alignment in loopback test") Fixes: 30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test") Fixes: 1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test") Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230821180153.18652-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-22Merge tag 'wireless-2023-08-22' of ↵Jakub Kicinski1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Two fixes: - reorder buffer filter checks can cause bad shift/UBSAN warning with newer HW, avoid the check (mac80211) - add Kconfig dependency for iwlwifi for PTP clock usage * tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning wifi: iwlwifi: mvm: add dependency for PTP clock ==================== Link: https://lore.kernel.org/r/20230822124206.43926-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-22net: ethernet: mtk_eth_soc: fix NULL pointer on hw resetDaniel Golle1-2/+10
When a hardware reset is triggered on devices not initializing WED the calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a pointer on uninitialized stack memory. Break out of both functions in case a hw_list entry is 0. Fixes: 08a764a7c51b ("net: ethernet: mtk_wed: add reset/reset_complete callbacks") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-21tg3: Use slab_build_skb() when neededKees Cook1-1/+4
The tg3 driver will use kmalloc() under some conditions. Check the frag_size and use slab_build_skb() when frag_size is 0. Silences the warning introduced by commit ce098da1497c ("skbuff: Introduce slab_build_skb()"): Use slab_build_skb() instead ... tg3_poll_work+0x638/0xf90 [tg3] Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()") Reported-by: Fiona Ebner <f.ebner@proxmox.com> Closes: https://lore.kernel.org/all/1bd4cb9c-4eb8-3bdb-3e05-8689817242d1@proxmox.com Cc: Siva Reddy Kallam <siva.kallam@broadcom.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230818175417.never.273-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-21ice: Fix NULL pointer deref during VF resetPetr Oros1-7/+8
During stress test with attaching and detaching VF from KVM and simultaneously changing VFs spoofcheck and trust there was a NULL pointer dereference in ice_reset_vf that VF's VSI is null. More than one instance of ice_reset_vf() can be running at a given time. When we rebuild the VSI in ice_reset_vf, another reset can be triaged from ice_service_task. In this case we can access the currently uninitialized VSI and cause panic. The window for this racing condition has been around for a long time but it's much worse after commit 227bf4500aaa ("ice: move VSI delete outside deconfig") because the reset runs faster. ice_reset_vf() using vf->cfg_lock and when we move this lock before accessing to the VF VSI, we can fix BUG for all cases. Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes in ice_vsi_stop_all_rx_rings() With our reproducer, we can hit BUG: ~8h before commit 227bf4500aaa ("ice: move VSI delete outside deconfig"). ~20m after commit 227bf4500aaa ("ice: move VSI delete outside deconfig"). After this fix we are not able to reproduce it after ~48h There was commit cf90b74341ee ("ice: Fix call trace with null VSI during VF reset") which also tried to fix this issue, but it was only partially resolved and the bug still exists. [ 6420.658415] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 6420.665382] #PF: supervisor read access in kernel mode [ 6420.670521] #PF: error_code(0x0000) - not-present page [ 6420.675659] PGD 0 [ 6420.677679] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 6420.682038] CPU: 53 PID: 326472 Comm: kworker/53:0 Kdump: loaded Not tainted 5.14.0-317.el9.x86_64 #1 [ 6420.691250] Hardware name: Dell Inc. PowerEdge R750/04V528, BIOS 1.6.5 04/15/2022 [ 6420.698729] Workqueue: ice ice_service_task [ice] [ 6420.703462] RIP: 0010:ice_vsi_is_rx_queue_active+0x2d/0x60 [ice] [ 6420.705860] ice 0000:ca:00.0: VF 0 is now untrusted [ 6420.709494] Code: 00 00 66 83 bf 76 04 00 00 00 48 8b 77 10 74 3e 31 c0 eb 0f 0f b7 97 76 04 00 00 48 83 c0 01 39 c2 7e 2b 48 8b 97 68 04 00 00 <0f> b7 0c 42 48 8b 96 20 13 00 00 48 8d 94 8a 00 00 12 00 8b 12 83 [ 6420.714426] ice 0000:ca:00.0 ens7f0: Setting MAC 22:22:22:22:22:00 on VF 0. VF driver will be reinitialized [ 6420.733120] RSP: 0018:ff778d2ff383fdd8 EFLAGS: 00010246 [ 6420.733123] RAX: 0000000000000000 RBX: ff2acf1916294000 RCX: 0000000000000000 [ 6420.733125] RDX: 0000000000000000 RSI: ff2acf1f2c6401a0 RDI: ff2acf1a27301828 [ 6420.762346] RBP: ff2acf1a27301828 R08: 0000000000000010 R09: 0000000000001000 [ 6420.769476] R10: ff2acf1916286000 R11: 00000000019eba3f R12: ff2acf19066460d0 [ 6420.776611] R13: ff2acf1f2c6401a0 R14: ff2acf1f2c6401a0 R15: 00000000ffffffff [ 6420.783742] FS: 0000000000000000(0000) GS:ff2acf28ffa80000(0000) knlGS:0000000000000000 [ 6420.791829] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6420.797575] CR2: 0000000000000000 CR3: 00000016ad410003 CR4: 0000000000773ee0 [ 6420.804708] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6420.811034] vfio-pci 0000:ca:01.0: enabling device (0000 -> 0002) [ 6420.811840] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6420.811841] PKRU: 55555554 [ 6420.811842] Call Trace: [ 6420.811843] <TASK> [ 6420.811844] ice_reset_vf+0x9a/0x450 [ice] [ 6420.811876] ice_process_vflr_event+0x8f/0xc0 [ice] [ 6420.841343] ice_service_task+0x23b/0x600 [ice] [ 6420.845884] ? __schedule+0x212/0x550 [ 6420.849550] process_one_work+0x1e2/0x3b0 [ 6420.853563] ? rescuer_thread+0x390/0x390 [ 6420.857577] worker_thread+0x50/0x3a0 [ 6420.861242] ? rescuer_thread+0x390/0x390 [ 6420.865253] kthread+0xdd/0x100 [ 6420.868400] ? kthread_complete_and_exit+0x20/0x20 [ 6420.873194] ret_from_fork+0x1f/0x30 [ 6420.876774] </TASK> [ 6420.878967] Modules linked in: vfio_pci vfio_pci_core vfio_iommu_type1 vfio iavf vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables bridge stp llc sctp ip6_udp_tunnel udp_tunnel nfp tls nfnetlink bluetooth mlx4_en mlx4_core rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp irdma kvm_intel i40e kvm iTCO_wdt dcdbas ib_uverbs irqbypass iTCO_vendor_support mgag200 mei_me ib_core dell_smbios isst_if_mmio isst_if_mbox_pci rapl i2c_algo_bit drm_shmem_helper intel_cstate drm_kms_helper syscopyarea sysfillrect isst_if_common sysimgblt intel_uncore fb_sys_fops dell_wmi_descriptor wmi_bmof intel_vsec mei i2c_i801 acpi_ipmi ipmi_si i2c_smbus ipmi_devintf intel_pch_thermal acpi_power_meter pcspk r Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Fixes: f23df5220d2b ("ice: Fix spurious interrupt during removal of trusted VF") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-21Revert "ice: Fix ice VF reset during iavf initialization"Petr Oros4-25/+4
This reverts commit 7255355a0636b4eff08d5e8139c77d98f151c4fc. After this commit we are not able to attach VF to VM: virsh attach-interface v0 hostdev --managed 0000:41:01.0 --mac 52:52:52:52:52:52 error: Failed to attach interface error: Cannot set interface MAC to 52:52:52:52:52:52 for ifname enp65s0f0np0 vf 0: Resource temporarily unavailable ice_check_vf_ready_for_cfg() already contain waiting for reset. New condition in ice_check_vf_ready_for_reset() causing only problems. Fixes: 7255355a0636 ("ice: Fix ice VF reset during iavf initialization") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-21ice: fix receive buffer size miscalculationJesse Brandeburg1-1/+2
The driver is misconfiguring the hardware for some values of MTU such that it could use multiple descriptors to receive a packet when it could have simply used one. Change the driver to use a round-up instead of the result of a shift, as the shift can truncate the lower bits of the size, and result in the problem noted above. It also aligns this driver with similar code in i40e. The insidiousness of this problem is that everything works with the wrong size, it's just not working as well as it could, as some MTU sizes end up using two or more descriptors, and there is no way to tell that is happening without looking at ice_trace or a bus analyzer. Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-20ipv4: fix data-races around inet->inet_idEric Dumazet1-1/+1
UDP sendmsg() is lockless, so ip_select_ident_segs() can very well be run from multiple cpus [1] Convert inet->inet_id to an atomic_t, but implement a dedicated path for TCP, avoiding cost of a locked instruction (atomic_add_return()) Note that this patch will cause a trivial merge conflict because we added inet->flags in net-next tree. v2: added missing change in drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c (David Ahern) [1] BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1: ip_select_ident_segs include/net/ip.h:542 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0: ip_select_ident_segs include/net/ip.h:541 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x184d -> 0x184e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 ================================================================== Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: validate veth and vxcan peer ifindexesJakub Kicinski2-10/+2
veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: bcmgenet: Fix return value check for fixed_phy_register()Ruan Jinjie1-1/+1
The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Fixes: b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-20net: bgmac: Fix return value check for fixed_phy_register()Ruan Jinjie1-1/+1
The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: phy: Fix deadlocking in phy_error() invocationSerge Semin1-4/+7
Since commit 91a7cda1f4b8 ("net: phy: Fix race condition on link status change") all the phy_error() method invocations have been causing the nested-mutex-lock deadlock because it's normally done in the PHY-driver threaded IRQ handlers which since that change have been called with the phydev->lock mutex held. Here is the calls thread: IRQ: phy_interrupt() +-> mutex_lock(&phydev->lock); <--------------------+ drv->handle_interrupt() | Deadlock due +-> ERROR: phy_error() + to the nested +-> phy_process_error() | mutex lock +-> mutex_lock(&phydev->lock); <-+ phydev->state = PHY_ERROR; mutex_unlock(&phydev->lock); mutex_unlock(&phydev->lock); The problem can be easily reproduced just by calling phy_error() from any PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock mutex lock from the phy_process_error() method and printing a nasty error message to the system log if the mutex isn't held in the caller execution context. Note for the fix to work correctly in the PHY-subsystem itself the phydev->lock mutex locking must be added to the phy_error_precise() function. Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com Fixes: 91a7cda1f4b8 ("net: phy: Fix race condition on link status change") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: sfp: handle 100G/25G active optical cables in sfp_parse_supportJosua Mayer1-0/+10
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC) for active optical cables supporting 25G and 100G speeds. Since the specification makes no statement about transmitter range, and as the specific sfp module that had been tested features only 2m fiber - short-range (SR) modes are selected. The 100G speed is irrelevant because it would require multiple fibers / multiple SFP28 modules combined under one netdev. sfp-bus.c only handles a single module per netdev, so only 25Gbps modes are selected. sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR with compatible properties, however that entry is a contradiction in itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely be a mode for qsfp modules only. Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r interface mode and 25000baseSR link mode. Also enforce SFP28 bitrate limits on the values read from sfp eeprom as requested by Russell King. Tested with fs.com S28-AO02 AOC SFP28 module. Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: mdio: mdio-bitbang: Fix C45 read/write protocolSerge Semin1-2/+2
Based on the original code semantic in case of Clause 45 MDIO, the address command is supposed to be followed by the command sending the MMD address, not the CSR address. The commit 002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions") has erroneously broken that. So most likely due to an unfortunate variable name it switched the code to sending the CSR address. In our case it caused the protocol malfunction so the read operation always failed with the turnaround bit always been driven to one by PHY instead of zero. Fix that by getting back the correct behaviour: sending MMD address command right after the regular address command. Fixes: 002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: dsa: mt7530: fix handling of 802.1X PAE framesArınç ÜNAL2-0/+6
802.1X PAE frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as regular multicast frames, therefore flooding them to user ports. To fix this, set 802.1X PAE frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-18mlxsw: Fix the size of 'VIRT_ROUTER_MSB'Amit Cohen3-5/+5
The field 'virtual router' was extended to 12 bits in Spectrum-4. Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for Spectrum < 4 and 4 bits for Spectrum >= 4. The elements are stored in an internal storage scratchpad. Currently, the MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs can be used for multicast routing, as the highest bit is not really used by the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust the definitions of 'virtual router' field in the blocks accordingly - use '_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask in parse function to use 4 bits. Fixes: 6d5d8ebb881c ("mlxsw: Rename virtual router flex key element") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/79bed2b70f6b9ed58d4df02e9798a23da648015b.1692268427.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18mlxsw: reg: Fix SSPR register layoutIdo Schimmel1-9/+0
The two most significant bits of the "local_port" field in the SSPR register are always cleared since they are overwritten by the deprecated and overlapping "sub_port" field. On systems with more than 255 local ports (e.g., Spectrum-4), this results in the firmware maintaining invalid mappings between system port and local port. Specifically, two different systems ports (0x1 and 0x101) point to the same local port (0x1), which eventually leads to firmware errors. Fix by removing the deprecated "sub_port" field. Fixes: fd24b29a1b74 ("mlxsw: reg: Align existing registers to use extended local_port field") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/9b909a3033c8d3d6f67f237306bef4411c5e6ae4.1692268427.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18mlxsw: pci: Set time stamp fields also when its type is MIRROR_UTCDanielle Ratson1-2/+6
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE time stamp type is UTC. The time stamps are read directly from the CQE and software can get the time stamp in UTC format using CQEv2. From Spectrum-4, the time stamps that are read from the CQE are allowed to be also from MIRROR_UTC type. Therefore, we get a warning [1] from the driver that the time stamp fields were not set, when LLDP control packet is sent. Allow the time stamp type to be MIRROR_UTC and set the time stamp in this case as well. [1] WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum] [...] Call Trace: <IRQ> mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum] mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core] mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci] tasklet_action_common.constprop.0+0x9f/0x110 __do_softirq+0xbb/0x296 irq_exit_rcu+0x79/0xa0 common_interrupt+0x86/0xa0 </IRQ> <TASK> Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/bcef4d044ef608a4e258d33a7ec0ecd91f480db5.1692268427.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18ipvlan: Fix a reference count leak warning in ipvlan_ns_exit()Lu Wei1-1/+2
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with L3S mode and ipvlan2 with L2 mode are created based on them as figure (1). In this case, ipvlan_register_nf_hook() will be called to register nf hook which is needed by ipvlans in L3S mode in ns1 and value of ipvl_nf_hook_refcnt is set to 1. (1) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) veth3--ipvlan2 (L2) (2) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) ipvlan2 (L2) veth3 | | |------->-------->--------->-------- migrate When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event: dev_change_net_namespace call_netdevice_notifiers ipvlan_device_event ipvlan_migrate_l3s_hook ipvlan_register_nf_hook(newnet) (I) ipvlan_unregister_nf_hook(oldnet) (II) In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0 since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to register nf_hook in ns2 and unregister nf_hook in ns1. As a result, ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2 is increased incorrectly. When the second net namespace is removed, a reference count leak warning in ipvlan_ns_exit() will be triggered. This patch add a check before ipvlan_migrate_l3s_hook() is called. The warning can be triggered as follows: $ ip netns add ns1 $ ip netns add ns2 $ ip netns exec ns1 ip link add veth1 type veth peer name veth2 $ ip netns exec ns1 ip link add veth3 type veth peer name veth4 $ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s $ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2 $ ip netns exec ns1 ip link set veth3 netns ns2 $ ip net del ns2 Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18net: dsa: felix: fix oversize frame dropping for always closed tc-taprio gatesVladimir Oltean1-0/+3
The blamed commit resolved a bug where frames would still get stuck at egress, even though they're smaller than the maxSDU[tc], because the driver did not take into account the extra 33 ns that the queue system needs for scheduling the frame. It now takes that into account, but the arithmetic that we perform in vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on 64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS may become a very large integer if gate_len_ns < 33 ns. In practice, this means that we've introduced a regression where all traffic class gates which are permanently closed will not get detected by the driver, and we won't enable oversize frame dropping for them. Before: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS After: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18octeontx2-af: SDP: fix receive link configHariprasad Kelam1-1/+2
On SDP interfaces, frame oversize and undersize errors are observed as driver is not considering packet sizes of all subscribers of the link before updating the link config. This patch fixes the same. Fixes: 9b7dd87ac071 ("octeontx2-af: Support to modify min/max allowed packet lengths") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18Merge tag 'net-6.5-rc7' of ↵Linus Torvalds23-48/+185
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter. No known outstanding regressions. Fixes to fixes: - virtio-net: set queues after driver_ok, avoid a potential race added by recent fix - Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning when VLAN 0 is registered explicitly - nf_tables: - fix false-positive lockdep splat in recent fixes - don't fail inserts if duplicate has expired (fix test failures) - fix races between garbage collection and netns dismantle Current release - new code bugs: - mlx5: Fix mlx5_cmd_update_root_ft() error flow Previous releases - regressions: - phy: fix IRQ-based wake-on-lan over hibernate / power off Previous releases - always broken: - sock: fix misuse of sk_under_memory_pressure() preventing system from exiting global TCP memory pressure if a single cgroup is under pressure - fix the RTO timer retransmitting skb every 1ms if linear option is enabled - af_key: fix sadb_x_filter validation, amment netlink policy - ipsec: fix slab-use-after-free in decode_session6() - macb: in ZynqMP resume always configure PS GTR for non-wakeup source Misc: - netfilter: set default timeout to 3 secs for sctp shutdown send and recv state (from 300ms), align with protocol timers" * tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) ice: Block switchdev mode when ADQ is active and vice versa qede: fix firmware halt over suspend and resume net: do not allow gso_size to be set to GSO_BY_FRAGS sock: Fix misuse of sk_under_memory_pressure() sfc: don't fail probe if MAE/TC setup fails sfc: don't unregister flow_indr if it was never registered net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset net/mlx5: Fix mlx5_cmd_update_root_ft() error flow net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT i40e: fix misleading debug logs iavf: fix FDIR rule fields masks validation ipv6: fix indentation of a config attribute mailmap: add entries for Simon Horman broadcom: b44: Use b44_writephy() return value net: openvswitch: reject negative ifindex team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves net: phy: broadcom: stub c45 read/write for 54810 netfilter: nft_dynset: disallow object maps netfilter: nf_tables: GC transaction race with netns dismantle netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path ...
2023-08-17Merge branch '40GbE' of ↵Jakub Kicinski4-12/+93
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e) This series contains updates to iavf and i40e drivers. Piotr adds checks for unsupported Flow Director rules on iavf. Andrii replaces incorrect 'write' messaging on read operations for i40e. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix misleading debug logs iavf: fix FDIR rule fields masks validation ==================== Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17Merge tag 'mlx5-fixes-2023-08-16' of ↵Jakub Kicinski3-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2023-08-16 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix mlx5_cmd_update_root_ft() error flow net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT ==================== Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17ice: Block switchdev mode when ADQ is active and vice versaMarcin Szycik2-0/+11
ADQ and switchdev are not supported simultaneously. Enabling both at the same time can result in nullptr dereference. To prevent this, check if ADQ is active when changing devlink mode to switchdev mode, and check if switchdev is active when enabling ADQ. Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17qede: fix firmware halt over suspend and resumeManish Chopra1-0/+10
While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However this NIC hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware afterwards. To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode. Without this fix device/firmware does not recover unless system is power cycled. Fixes: 2950219d87b0 ("qede: Add basic network device support") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17sfc: don't fail probe if MAE/TC setup failsEdward Cree1-1/+1
Existing comment in the source explains why we don't want efx_init_tc() failure to be fatal. Cited commit erroneously consolidated failure paths causing the probe to be failed in this case. Fixes: 7e056e2360d9 ("sfc: obtain device mac address based on firmware handle for ef100") Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17sfc: don't unregister flow_indr if it was never registeredEdward Cree1-1/+1
In efx_init_tc(), move the setting of efx->tc->up after the flow_indr_dev_register() call, so that if it fails, efx_fini_tc() won't call flow_indr_dev_unregister(). Fixes: 5b2e12d51bd8 ("sfc: bind indirect blocks for TC offload on EF100") Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16net: dsa: mv88e6xxx: Wait for EEPROM done before HW resetAlfred Lee1-0/+8
If the switch is reset during active EEPROM transactions, as in just after an SoC reset after power up, the I2C bus transaction may be cut short leaving the EEPROM internal I2C state machine in the wrong state. When the switch is reset again, the bad state machine state may result in data being read from the wrong memory location causing the switch to enter unexpected mode rendering it inoperational. Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset") Signed-off-by: Alfred Lee <l00g33k@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16net/mlx5: Fix mlx5_cmd_update_root_ft() error flowShay Drory1-1/+9
The cited patch change mlx5_cmd_update_root_ft() to work with multiple peer devices. However, it didn't align the error flow as well. Hence, Fix the error code to work with multiple peer devices. Fixes: 222dd185833e ("{net/RDMA}/mlx5: introduce lag_for_each_peer") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-08-16net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECTDragos Tatulea2-3/+7
Before this fix, running high rate traffic through XDP_REDIRECT with multibuf could overrun the fifo used to release the xdp frames after tx completion. This resulted in corrupted data being consumed on the free side. The culplirt was a miscalculation of the fifo size: the maximum ratio between fifo entries / data segments was incorrect. This ratio serves to calculate the max fifo size for a full sq where each packet uses the worst case number of entries in the fifo. This patch fixes the formula and names the constant. It also makes sure that future values will use a power of 2 number of entries for the fifo mask to work. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Fixes: 3f734b8c594b ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-08-16i40e: fix misleading debug logsAndrii Staikov1-8/+8
Change "write" into the actual "read" word. Change parameters description. Fixes: 7073f46e443e ("i40e: Add AQ commands for NVM Update for X722") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-16iavf: fix FDIR rule fields masks validationPiotr Gardocki3-4/+85
Return an error if a field's mask is neither full nor empty. When a mask is only partial the field is not being used for rule programming but it gives a wrong impression it is used. Fix by returning an error on any partial mask to make it clear they are not supported. The ip_ver assignment is moved earlier in code to allow using it in iavf_validate_fdir_fltr_masks. Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters") Fixes: e90cbc257a6f ("iavf: Support IPv6 Flow Director filters") Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-16broadcom: b44: Use b44_writephy() return valueArtem Chernyshev1-5/+3
Return result of b44_writephy() instead of zero to deal with possible error. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-15team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slavesZiyang Xuan1-1/+3
Similar to commit 01f4fd270870 ("bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info) in unregister_vlan_dev() with the following testcase: # ip netns add ns1 # ip netns exec ns1 ip link add team1 type team # ip netns exec ns1 ip link add team_slave type veth peer veth2 # ip netns exec ns1 ip link set team_slave master team1 # ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link set team_slave nomaster # ip netns del ns1 Add S-VLAN tag related features support to team driver. So the team driver will always propagate the VLAN info to its slaves. Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15net: phy: broadcom: stub c45 read/write for 54810Justin Chen1-0/+13
The 54810 does not support c45. The mmd_phy_indirect accesses return arbirtary values leading to odd behavior like saying it supports EEE when it doesn't. We also see that reading/writing these non-existent MMD registers leads to phy instability in some cases. Fixes: b14995ac2527 ("net: phy: broadcom: Add BCM54810 PHY entry") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-15wifi: iwlwifi: mvm: add dependency for PTP clockRandy Dunlap1-0/+1
When the code to use the PTP HW clock was added, it didn't update the Kconfig entry for the PTP dependency, leading to build errors, so update the Kconfig entry to depend on PTP_1588_CLOCK_OPTIONAL. aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_init': drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294: undefined reference to `ptp_clock_register' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294:(.text+0xce8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301: undefined reference to `ptp_clock_index' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301:(.text+0xd18): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_remove': drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315: undefined reference to `ptp_clock_index' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315:(.text+0xe80): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319: undefined reference to `ptp_clock_unregister' drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319:(.text+0xeac): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_unregister' Fixes: 1595ecce1cf3 ("wifi: iwlwifi: mvm: add support for PTP HW clock (PHC)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202308110447.4QSJHmFH-lkp@intel.com/ Cc: Krishnanand Prabhu <krishnanand.prabhu@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230812052947.22913-1-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+1
Pull virtio fixes from Michael Tsirkin: "Just a bunch of bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (26 commits) virtio-mem: check if the config changed before fake offlining memory virtio-mem: keep retrying on offline_and_remove_memory() errors in Sub Block Mode (SBM) virtio-mem: convert most offline_and_remove_memory() errors to -EBUSY virtio-mem: remove unsafe unplug in Big Block Mode (BBM) pds_vdpa: fix up debugfs feature bit printing pds_vdpa: alloc irq vectors on DRIVER_OK pds_vdpa: clean and reset vqs entries pds_vdpa: always allow offering VIRTIO_NET_F_MAC pds_vdpa: reset to vdpa specified mac virtio-net: Zero max_tx_vq field for VIRTIO_NET_CTRL_MQ_HASH_CONFIG case vdpa/mlx5: Fix crash on shutdown for when no ndev exists vdpa/mlx5: Delete control vq iotlb in destroy_mr only when necessary vdpa/mlx5: Fix mr->initialized semantics vdpa/mlx5: Correct default number of queues when MQ is on virtio-vdpa: Fix cpumask memory leak in virtio_vdpa_find_vqs() vduse: Use proper spinlock for IRQ injection vdpa: Enable strict validation for netlinks ops vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check vdpa: Add queue index attr to vdpa_nl_policy for nlattr length check vdpa: Add features attr to vdpa_nl_policy for nlattr length check ...
2023-08-14net: veth: Page pool creation error handling for existing pools onlyLiang Chen1-1/+2
The failure handling procedure destroys page pools for all queues, including those that haven't had their page pool created yet. this patch introduces necessary adjustments to prevent potential risks and inconsistency with the error handling behavior. Fixes: 0ebab78cbcbf ("net: veth: add page_pool for page recycling") Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Link: https://lore.kernel.org/r/20230812023016.10553-1-liangchen.linux@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: cancel queued works in probe error pathMichal Schmidt1-3/+4
If it fails to get the devices's MAC address, octep_probe exits while leaving the delayed work intr_poll_task queued. When the work later runs, it's a use after free. Move the cancelation of intr_poll_task from octep_remove into octep_device_cleanup. This does not change anything in the octep_remove flow, but octep_device_cleanup is called also in the octep_probe error path, where the cancelation is needed. Note that the cancelation of ctrl_mbox_task has to follow intr_poll_task's, because the ctrl_mbox_task may be queued by intr_poll_task. Fixes: 24d4333233b3 ("octeon_ep: poll for control messages") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: cancel ctrl_mbox_task after intr_poll_taskMichal Schmidt1-1/+1
intr_poll_task may queue ctrl_mbox_task. The function octep_poll_non_ioq_interrupts_cn93_pf does this. When removing the driver and canceling these two works, cancel ctrl_mbox_task last to guarantee it does not run anymore. Fixes: 24d4333233b3 ("octeon_ep: poll for control messages") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-4-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: cancel tx_timeout_task later in remove sequenceMichal Schmidt1-1/+1
tx_timeout_task is canceled too early when removing the driver. Nothing prevents .ndo_tx_timeout from triggering and queuing the work again. Better cancel it after the netdev is unregistered. It's harmless for octep_tx_timeout_task to run in the window between the unregistration and cancelation, because it checks netif_running. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-14octeon_ep: fix timeout value for waiting on mbox responseMichal Schmidt1-1/+1
The intention was to wait up to 500 ms for the mbox response. The third argument to wait_event_interruptible_timeout() is supposed to be the timeout duration. The driver mistakenly passed absolute time instead. Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 22:04:45 +0000