summaryrefslogtreecommitdiff
path: root/drivers/hid/wacom_wac.h
AgeCommit message (Collapse)AuthorFilesLines
2015-01-29HID: wacom: add support for Cintiq 27QHD and 27QHD touchPing Cheng1-1/+6
These devices have accelerometers. To report accelerometer coordinates, a new property, INPUT_PROP_ACCELEROMETER, is added. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-12HID: wacom: peport In Range event according to the specPing Cheng1-0/+1
Some Cintiq and Intuos tablets report In Range event. This event is sent before valid data is reported when tool enters proximity; or before out of proximity event is reported when tool exits. While entering proximity, In Range means a pen is detected. This information can be used for palm/touch rejection on both pen and touch enabled devices. While exiting, it means the tool has reached its maximum detectable distance. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-06HID: wacom: add support of the Pen of the Bamboo PadBenjamin Tissoires1-0/+1
Bamboo Pads are using the generic processing but their report descriptors differ from the ISDv* line. The pen fields are marked with the .physical as Digitizer_Pen, which makes also sense. Add this field to the checks and enable for free Bamboo Pads. Reported-by: Josep Sanchez Ferreres <josep.sanchez.ferreres@est.fib.upc.edu> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-06HID: wacom: use WACOM_*_FIELD macros in wacom_usage_mapping()Benjamin Tissoires1-0/+8
We introduced nice macros in wacom_wac.c to check whether a field is a pen or a touch one. wacom_usage_mapping() still uses it's own tests, which are not in sync with the wacom_wac tests (.application is not checked). That means that some legitimate fields might be filtered out from the usage mapping, and thus will not be used properly while receiving the events. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-11HID: wacom: Report input events for each finger on generic devicesJason Gerecke1-0/+1
The existing generic touch code only reports events after reading an entire HID report, which practically means that only data about the last contact in a report will ever be provided to userspace. This patch uses a trick from hid-multitouch.c to discover what type of field is at the end of each contact; when such a field is encountered all the stored contact data will be reported. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-12-05HID: wacom: Add support for DTU-1031XPing Cheng1-0/+1
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-26HID: wacom: PAD is independent with pen/touchPing Cheng1-0/+1
PAD can be on pen interface (Intuos Pro and Cintiq series) or touch interface (Bamboo PT and Intuos PT series) or its own interface (Bamboo pen-only and Intuos Pen M/S). We need to mark it independently. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: implement the finger part of the HID generic handlingBenjamin Tissoires1-0/+8
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: implement generic HID handling for pen generic devicesBenjamin Tissoires1-0/+8
ISDv4 and v5 are plain HID devices. We can directly implement a generic HID parsing/handling and remove the need to manually add those PID in the list of supported devices. This patch implements the pen support only. The finger part will come in a later patch. To be properly notified of an .event() and a .report(), we need to force hid-core to go through the HID parsing. By default, wacom.ko binds only hidraw, so the hid parsing is not done by hid-core. When a true HID device is there, we add the flag HID_CLAIMED_DRIVER to hid->claimed which will force hid-core to parse the incoming reports. (Note that this can be easily backported by directly setting the .claimed flag to HID_CLAIMED_DRIVER even if hid-core does not support HID_CONNECT_DRIVER) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01HID: wacom: split out input allocation and registrationBenjamin Tissoires1-0/+1
If the input can be created earlier during probe, we can already populate them while reading the report descriptor. This way, we can rely on the hid subsystem directly for tablets which already provide a meaningful report descriptor (like ISDv4-5). This patch only splits the allocation and registration, but do not change where we allocate the input. This will come in a later patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-06Input: wacom - handle Intuos 4 BT in wacom.koBenjamin Tissoires1-0/+1
A good point of this change is that now, the Intuos4 bluetooth can handle the different tools (artpen, airbrush, mice), and we get a common interface between USB and BT for accessing the LEDs/OLEDs. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - handle Graphire BT tablets in wacom.koBenjamin Tissoires1-0/+2
First, merge the Graphire BT tablet. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Input: wacom - prepare the driver to include BT devicesBenjamin Tissoires1-0/+2
Now that wacom is a hid driver, there is no point in having a separate driver for bluetooth devices. This patch prepares the common paths of Bluetooth devices in the common wacom driver. It also adds the sysfs file "speed" used by Bluetooth devices. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - register an ac power supply for wireless devicesBenjamin Tissoires1-0/+1
This is used by HID Bluetooth devices but also add some more information to the USB Wireless Receiver. We are just porting the bits from hid-wacom.c to the common driver here. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - use a uniq name for the battery deviceBenjamin Tissoires1-0/+1
The current implementation uses "wacom_battery" as a generic name for batteries. This prevents us to have two Wacom devices with a battery attached as the power system will complain about the name which is already registered. Use an incremental name for each battery attached. Related bug: https://sourceforge.net/p/linuxwacom/bugs/248/ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - enhance Wireless Receiver battery reportingBenjamin Tissoires1-0/+3
- Reports the current status of the battery (discharging, charging, full). - Also notify the upower daemon when there is a change in the battery value. - keep the battery value as a percentage, not the raw value - add WACOM_QUIRK_BATTERY to easily add a battery to a device (required for Bluetooth devices) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires1-0/+169
wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-19 05:33:25 +0000