summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-07-10I2C: OMAP2+: Introduce I2C IP versioning constantsAndy Green1-0/+1
These represent the two kinds of (incompatible) OMAP I2C peripheral unit in use so far. The constants are in linux/i2c-omap.h so the omap i2c driver can have them too. Cc: patches@linaro.org Cc: Ben Dooks <ben-linux@fluff.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10I2C: OMAP2+: increase omap_i2c_dev_attr flags from u8 to u32Andy Green1-1/+1
As part of removing cpu_...() from the OMAP I2C driver, we need to convert the CPU tests into functionality flags that are set by hwmod class in the same way the IP revision is. More flags are needed than will fit in the existing u8 flags member of omap_i2c_dev_attr. These flags can refer to options inside the IP block but they are most needed for information about cpu implementation specific options that are not part of the IP block itself. For example, how the CPU data bus is wired to the IP block databus differs between OMAP cpus and affects how you must shift the address in the IP block, but is not a feature of the IP block itself. Cc: patches@linaro.org Cc: Ben Dooks <ben-linux@fluff.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2cAndy Green3-4/+9
Peter Maydell noticed when running under QEMU he was getting errors reporting 32-bit access to I2C peripheral unit registers that are documented to be 8 or 16-bit only[1][2] The I2C driver is blameless as it wraps its accesses in a function using __raw_writew and __raw_readw, it turned out it is the hwmod stuff. However the hwmod code already has a flag to force a perhipheral unit to only be accessed using 16-bit operations. This patch applies the 16-bit only flag to the 2430, OMAP3xxx and OMAP44xx hwmod structs. 2420 was already correctly marked up as 16-bit. The 2430 change will need testing by TI as arranged in the comments to the previous patch version. When the 16-bit flag is or-ed with other flags, it is placed first as requested in comments. [1] OMAP4430 Technical reference manual section 23.1.6.2 [2] OMAP3530 Techincal reference manual section 18.6 Cc: patches@linaro.org Cc: Ben Dooks <ben-linux@fluff.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-10OMAP4: hwmod data: Change DSS main_clk schemeTomi Valkeinen1-14/+14
Currently using pm_runtime with DSS requires the DSS driver to enable the DSS functional clock before calling pm_runtime_get(). That makes it impossible to use pm_runtime in DSS as it is meant to be used, with pm_runtime callbacks. This patch changes the hwmod database for OMAP4 so that enabling the hwmod via pm_runtime will also enable the DSS functional clock, allowing us to use pm_runtime properly in DSS driver. The DSS HWMOD side is not really correct, not before nor after this patch, and getting DSS to retention will probably not work currently. However, it is not supported in the mainline kernel anyway, so this won't break anything. So this patch allows us to write the pm_runtime adaptation for the DSS driver the way it should be done, and the HWMOD/PM side can be fixed later. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: hwmod data: Modify DSS opt clocksTomi Valkeinen2-4/+37
Add missing DSS optional clocks to HWMOD data for OMAP4xxx. Add HWMOD_CONTROL_OPT_CLKS_IN_RESET flag for dispc to fix dispc reset. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> [b-cousson@ti.com: Remove a comment and update the subject] Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> [paul@pwsan.com: removed DSS "fck" role and some clkdev aliases at Tomi's request] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09Merge branches 'dmtimer_precleanup_3.1', 'hwmod_core_cleanup_a_3.1', ↵Paul Walmsley26-3176/+2116
'combine_common_hwmod_3.1', 'omap4_hwmod_data_cleanup_a_3.1', 'clock_cleanup_a_3.1', 'prcm_cleanup_a_3.1', 'omap_pm_cleanup_3.1' and 'omap_device_cleanup_3.1' into prcm-cleanup-3.1
2011-07-09OMAP4: clock data: Remove UNIPRO clock nodesJon Hunter1-60/+0
UNIPRO was removed from OMAP4 devices from ES2.0 onwards. Since this IP was anyway non-functional and not supported, it is best to remove it completely. Signed-off-by: Jon Hunter <jon-hunter@ti.com> [b-cousson@ti.com: Update the changelog] Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: split PRCM header file changes into a separate patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: clock data: Remove McASP2, McASP3 and MMC6 clocksJon Hunter1-55/+31
McASP2, 3 and MMC6 modules are not present in the OMAP4 family. Remove the fclk and the clksel related to these nodes. Rename the references that were potentially re-used in order nodes. Remove related macros in prcm header files. Update TI copyright date. Signed-off-by: Jon Hunter <jon-hunter@ti.com> [b-cousson@ti.com: Update the patch according to autogen output] Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: split PRCM data changes into a separate patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP PM: remove OMAP_PM_NONE config optionJean Pihet2-11/+0
The current code base is not linking with the OMAP_PM_NONE option set. Since the option OMAP_PM_NOOP provides a no-op/debug layer, OMAP_PM_NONE can be removed. OMAP_PM_NOOP is enabled by default by Kconfig. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP: omap_device: replace _find_by_pdev() with to_omap_device()Kevin Hilman1-10/+5
The omap_device layer currently has two ways of getting an omap_device pointer from a platform_device pointer. Replace current usage of _find_by_pdev() with to_omap_device() since to_omap_device() is more familiar to the existing to_platform_device() used when getting a platform_device pointer from a struct device pointer. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: clockdomain data: Fix data order and wrong nameBenoit Cousson1-61/+63
MPUSS was renamed MPU and L3_D2D D2D. The rename will slightly change the order of the structure and thus generate some structures moves. Add a comment and remove a comma. Update Copyright for TI and Nokia and add back Paul in the author list. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: prcm_mpu: Fix indent in few macrosBenoit Cousson1-35/+34
Some maros were not well aligned. Re-align them. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: cm: Remove RESTORE macros to avoid access from SWBenoit Cousson3-455/+254
The restore part of the CM is an alias of some regular registers used only during the SAR restore to facilate the dma to write a contiguous set of registers. The registers should never be used by the SW, only the original register have to be used. Remove them from cmX_44xx.h files to avoid anybody to use them by mistake. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: powerdomain data: Fix indentationBenoit Cousson1-9/+9
Indent flags to be aligned with other fields. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> [paul@pwsan.com: split this patch from an earlier patch by Benoît; edited commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: prm: Remove wrong clockdomain offsetsBenoit Cousson1-12/+0
The following commit introduced new macros to define an offset per clock domain in an instance. commit e4156ee52fe617c2c2d80b5db993ff4bf07d7c3c OMAP4: CM instances: add clockdomain register offsets The PRM contains only two clock controls management entities: EMU and WKUP. Remove the other ones. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: prcm: Fix errors in few defines nameBenoit Cousson3-37/+36
A couple of macros were wrongly changed during the _MOD to _INST rename done in the following commit: OMAP4: PRCM: rename _MOD macros to _INST cdb54c4457d68994da7c2e16907adfbfc130060d Fix them to their original name. Some CM and PRM instances were not well aligned. Align them. Remove one blank line in cm2_44xx.h to align the output with the other (cm1_44xx.h, prm44xx.h) files. Update header copyright date. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: clock data: Fix max mult and div for USB DPLLBenoit Cousson3-23/+15
The DPLL USB can generate higher speed (x2) than the regular ones. The max multiplication value is then twice the previous value. Fix both max_mult and max_div with that correct values. Change the max_div variable type to u16 to allow storing up to 256. Replace as well the define with the value to avoid unneeded indirection and provide a better readability. Remove the defines that become useless. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: clock data: Re-order some clock nodes and structure fieldsBenoit Cousson1-32/+34
A couple of fieds were edited manually and thus do not stick to the template used by the generator and by other structures. Move them to the correct location. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: dropped the UNIPRO changes since those will be removed in a later patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: clock data: Remove usb_host_fs clkdev with NULL devBenoit Cousson1-3/+0
usb_host_fs_fck does have a clkdev mapping with "usbhs-omap.0" and "fs_fck" alias used by the driver. The entry with NULL dev is thus not needed anymore. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: clock data: Add sddiv to USB DPLLBenoit Cousson1-0/+1
The USB DPLL is a J-Type DPLL with the sddiv extra parameter. Add it in USB DPLL. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: dropped UNIPRO change since it is removed in a later patch] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: hwmod data: Align interconnect format with regular modulesBenoit Cousson1-18/+18
The interconnect modules were using a slightly different layout than the regular modules. Align the layout for better consitency. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: hwmod data: Fix bad alignementBenoit Cousson1-22/+23
Fix .prcm alignement and usb_otg_hs class and hwmod structures. Add a couple of more potential hwmods in the comment. Remove hsi, since it is already included in the data. Remove one blank line. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: hwmod data: Remove un-needed parensBenoit Cousson1-2/+2
A couple of parens were added around some flags. Remove them, since they are not needed and not used for any other hwmods. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: hwmod data: Fix L3 interconnect data order and alignementBenoit Cousson1-14/+13
Change the position of the ocp_if structure to match the template. Remove unneeded comma at the end of address space flag field. Remove USER_SDMA since this ocp link is only from the l3_main_1 path that is accessible only from the MPU in that case and not the SDMA. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09omap_hwmod: share identical omap_hwmod_class, omap_hwmod_class_sysconfig arraysPaul Walmsley6-643/+364
To reduce kernel source file data duplication, share struct omap_hwmod_class and omap_hwmod_class_sysconfig arrays across OMAP2xxx and 3xxx hwmod data files. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09omap_hwmod: share identical omap_hwmod_dma_info arraysPaul Walmsley7-260/+144
To reduce kernel source file data duplication, share struct omap_hwmod_dma_info arrays across OMAP2xxx and 3xxx hwmod data files. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09omap_hwmod: use a terminator record with omap_hwmod_dma_info arraysPaul Walmsley6-87/+106
Previously, struct omap_hwmod_dma_info arrays were unterminated; and users of these arrays used the ARRAY_SIZE() macro to determine the length of the array. However, ARRAY_SIZE() only works when the array is in the same scope as the macro user. So far this hasn't been a problem. However, to reduce duplicated data, a subsequent patch will move common data to a separate, shared file. When this is done, ARRAY_SIZE() will no longer be usable. This patch removes ARRAY_SIZE() usage for struct omap_hwmod_dma_info arrays and uses a sentinel value (irq == -1) as the array terminator instead. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09omap_hwmod: share identical omap_hwmod_mpu_irqs arraysPaul Walmsley7-423/+275
To reduce kernel source file data duplication, share struct omap_hwmod_mpu_irqs arrays across OMAP2xxx and 3xxx hwmod data files. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09omap_hwmod: use a terminator record with omap_hwmod_mpu_irqs arraysPaul Walmsley6-180/+205
Previously, struct omap_hwmod_mpu_irqs arrays were unterminated; and users of these arrays used the ARRAY_SIZE() macro to determine the length of the array. However, ARRAY_SIZE() only works when the array is in the same scope as the macro user. So far this hasn't been a problem. However, to reduce duplicated data, a subsequent patch will move common data to a separate, shared file. When this is done, ARRAY_SIZE() will no longer be usable. This patch removes ARRAY_SIZE() usage for struct omap_hwmod_mpu_irqs arrays and uses a sentinel value (irq == -1) as the array terminator instead. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09omap_hwmod: share identical omap_hwmod_addr_space arraysPaul Walmsley7-699/+414
To reduce kernel source file data duplication, share struct omap_hwmod_addr_space arrays across OMAP2xxx and 3xxx hwmod data files. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09omap_hwmod: use a null structure record to terminate omap_hwmod_addr_space ↵Paul Walmsley6-225/+249
arrays Previously, struct omap_hwmod_addr_space arrays were unterminated; and users of these arrays used the ARRAY_SIZE() macro to determine the length of the array. However, ARRAY_SIZE() only works when the array is in the same scope as the macro user. So far this hasn't been a problem. However, to reduce duplicated data, a subsequent patch will move common data to a separate, shared file. When this is done, ARRAY_SIZE() will no longer be usable. This patch removes ARRAY_SIZE() usage for struct omap_hwmod_addr_space arrays and uses a null structure member as the array terminator instead. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP: hwmod: Move pr_debug to improve the readabilityBenoit Cousson1-15/+17
Move the pr_debug at the top of the function to trace the entry even if the first test is failing. That help understanding that we entered the function but failed in it. Move the _enable last part out of the test to reduce indentation and improve readability. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP: hwmod: Add warnings if enable failedBenoit Cousson1-0/+2
Change the debug into warning to check what IPs are failing. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP2+: hwmod: Fix the HW reset managementBenoit Cousson1-16/+16
The HW reset must be de-assert after the clocks are enabled but before waiting for the target to be ready. Otherwise the reset might not work properly since the clock is not running to proceed the reset. De-assert the reset after _enable_clocks and before _wait_target_ready. Re-assert it only when the clocks are disabled. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP2+: hwmod: Remove _populate_mpu_rt_base warningBenoit Cousson1-3/+0
It is perfectly valid for some hwmod to not have any register target address for sysconfig. This is especially true for interconnect hwmods. Remove the warning. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP2+: hwmod: Do not write the enawakeup bit if SYSC_HAS_ENAWAKEUP is not setBenoit Cousson1-10/+4
The Type 2 type of IPs will not have any enawakeup bit in their sysconfig. Writing to that bit will instead trigger a softreset. Check the flag to write this bit only if the module supports it. Reported-by: Miguel Vadillo <vadillo@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP2+: hwmod: Enable module in shutdown to access sysconfigMiguel Vadillo1-1/+4
When calling the shutdown, the module may be already in idle. Accessing the sysconfig register will then lead to a crash. In that case, re-enable the module in order to allow the access to the sysconfig register. Signed-off-by: Miguel Vadillo <vadillo@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP4: hwmod data: Add MSTANDBY_SMART_WKUP flagBenoit Cousson1-4/+5
Add the flag to every IPs that support it to allow the framework to enable it instead of the SMART_STANDBY default mode. Without that, an IP with busmaster capability will not be able to wakeup the interconnect at all. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP2+: hwmod: Fix smart-standby + wakeup supportBenoit Cousson2-7/+29
The commit 86009eb326afde34ffdc5648cd344aa86b8d58d4 was adding the wakeup support for new OMAP4 IPs. This support is incomplete for busmaster IPs that need as well to use smart-standby with wakeup. This new standbymode is suported on HSI and USB_HOST_FS for the moment. Add the new MSTANDBY_SMART_WKUP flag to mark the IPs that support this capability. Enable this new mode when applicable in _enable_wakeup, _disable_wakeup, _enable_sysc and _idle_sysc. The omap_hwmod_44xx_data.c will have to be updated to add this new flag. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Djamil Elaidi <d-elaidi@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-07-09OMAP: dmtimer: add missing includePaul Walmsley1-0/+1
After commit caf64f2fdc48472995d40656eb1a75524c464447 ("omap: Make a subset of dmtimer functions into inline functions"), arch/arm/plat-omap/include/plat/dmtimer.h is missing an include of linux/io.h - add it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2011-07-08Merge branch 'cleanup-part-2' of ↵Arnd Bergmann24-988/+492
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap/cleanup
2011-07-07Merge branch 'peter/topic/for-tony_mach-cleanup' of ↵Tony Lindgren21-972/+489
git://gitorious.org/omap-audio/linux-audio into cleanup-part-2
2011-07-07omap: mcbsp: Remove port number enumsJarkko Nikula2-11/+3
These McBSP port number enums are used only in two places in the McBSP code so we may remove then and just use numeric values like rest of the code does. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-07omap: mcbsp: Remove rx_/tx_word_length variablesJarkko Nikula2-5/+0
These variables got unused after ("omap: mcbsp: Drop in-driver transfer support") but was noticed only afterwards. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04OMAP3: Move common regulator configuration to twl-commonPeter Ujfalusi14-420/+124
Some regulator config can be moved out from board files, since they are close to identical. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04OMAP3: Move common twl configuration to twl-commonPeter Ujfalusi16-257/+99
Reduce the amount of duplicated code by moving the common configuration for twl4030/5030/tpsxx to the twl-common file. Use the omap3_pmic_get_config function from board files to properly configure the PMIC with the common fields. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04OMAP4: Move common twl6030 configuration to twl-commonPeter Ujfalusi4-265/+205
Reduce the amount of duplicated code by moving the common configuration for TWL6030 (on OMAP4 platform) to the twl-common file. Use the omap4_pmic_get_config function from board files to properly configure the PMIC with the common fields. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-07-04OMAP: New twl-common for common TWL configurationPeter Ujfalusi5-46/+77
Introduce a new file, which will be used to configure common pmic (TWL) devices, regulators, and TWL audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-06-30omap2+: fix build regressionArnd Bergmann1-1/+1
board-generic.c now contains a reference to omap3_timer, but depends only on ARCH_OMAP2, not on ARCH_OMAP3, which controls that symbol. omap2_timer seems to be more appropriate anyway, so use that instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
2011-06-29Merge branch 'for_3.1/pm-misc' of ↵Tony Lindgren9-385/+51
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-cleanup Conflicts: arch/arm/mach-omap2/pm-debug.c arch/arm/mach-omap2/pm.h
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-19 13:22:17 +0000