summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2017-01-29Merge tag 'samsung-dt-4.11-2' of ↵Olof Johansson2-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Samsung DeviceTree update for v4.11, second round: 1. Use bigger reserved memory region for Multi Format Codec on all Exynos chipsets so it could decode FullHD easily. * tag 'samsung-dt-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix indentation of EHCI and OHCI ports ARM: dts: exynos: Increase MFC left reserved memory region size Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'imx-dt-4.11' of ↵Olof Johansson131-920/+3868
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX device tree updates for 4.11: - New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev, imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6. - A patch from Alexandre to correct the mangled license text which has been copied & pasted all over the i.MX device tree files. - Update cpu nodes of some i.MX SoCs to make them consistent and match ePAPR spec. - Add OCOTP device for i.MX6UL SoC. - Add security violation interrupt for i.MX25 DryIce. - Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo board. - Enable S/PDIF and 2nd display pipeline support for CompuLab board.. - Add SPI and LTC3676 PMIC support for Gateworks Ventana boards. - A few random device addition for various boards: TVE DAC regulators for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for i.MX6UL Engicam boards. - Cleanups on obsoleted or unused properties. * tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits) ARM: dts: udoo_neo: Add Bluetooth support ARM: dts: udoo_neo: Add Wifi support ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible" ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline ARM: dts: vf610-zii-dev: Add .dts file for rev. C ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup ARM: dts: imx6: Support Savageboard quad ARM: dts: imx6: Support Savageboard dual ARM: dts: imx6: Add Savageboard common file ARM: dts: imx53-qsb: Provide the TVE DAC regulators ARM: dts: imx6q: Add mccmon6 board support Doc: devicetree: bindings: Add vendor prefix entry - lwn ARM: dts: imx/vf: Correct license text ARM: dts: imx25.dtsi: DryIce security violation interrupt ARM: dts: imx: Add ocotp node for imx6ul ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'imx-fixes-nc-4.11' of ↵Olof Johansson9-104/+116
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX non-critical device tree fixes for 4.11: - A couple of fixes on anatop regulator voltage and constraints according to hardware datasheet. - Correct FEC interrupt routing for i.MX6QP which has got the hardware bug found on i.MX6Q fixed. - Remove unit address from i.MX6 LDB device node to fix DTC warning. - A fix on imx53-qsb board FEC pinmux config to remove the dependency on firmware for setting up pins. - A series from Sascha to fix LPSR pins for i.MX7 boards. * tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx53-qsb-common: fix FEC pinmux config ARM: imx6: remove unit address from LDB node ARM: imx6qp: adapt DT to changed FEC interrupts ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5 ARM: imx6: fix min/max voltage of anatop 2p5 regulator ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names ARM: dts: imx7d-cl-som: Fix OTG power pinctrl ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux ARM: dts: imx7s-warp: Fix watchdog pinmux Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson10-6/+419
mvebu dt for 4.11 (part 2) Switch device tree files to the new DSA binding * tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding ARM: dts: kirkwood-dir665: Utilize new DSA binding ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding ARM: dts: armada-388-clearfog: Utilize new DSA binding ARM: dts: armada-385-linksys: Utilize new DSA binding ARM: dts: armada-370-rd: Utilize new DSA binding Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge branch 'sti-dt-for-v4.11-round2' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt * 'sti-dt-for-v4.11-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiH407-family: Add missing pwm irq Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'tegra-for-4.11-arm-dt' of ↵Olof Johansson7-66/+66
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Device tree changes for v4.11-rc1 This contains a set of patches that add hardware compatibility for newer revisions of the Toradex Apalis TK1. Also included is a fix to the PAZ00 that stabilizes panel initialization on boot as well as a patch to add card detection for the µSD card slot on TrimSlice. To round things off there are a couple of fixes and changes to the Nyan device tree files to fix the battery charger, add compatibility with new revisions of Nyan Blaze and Nyan Big, as well as properly support the TPM. * tag 'tegra-for-4.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: nyan-blaze: Proper pinmux for TPM I2C ARM: tegra: nyan-big: Proper pinmux for TPM I2C ARM: tegra: nyan-blaze: Include compatible revisions for proper detection ARM: tegra: nyan-big: Include compatible revisions for proper detection ARM: tegra: nyan: Use external control for bq24735 charger ARM: tegra: nyan: Use proper IRQ type definitions ARM: dts: tegra: Fix missing card detection in Trimslice µSD card slot ARM: tegra: paz00: Mark panel regulator as enabled on boot ARM: tegra: apalis-tk1: Update compatibility comment ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HW ARM: tegra: apalis-tk1: Adjust pin muxing for v1.1 HW ARM: tegra: apalis-tk1: Optional DisplayPort hot-plug detect ARM: tegra: apalis-tk1: Pull-up temperature alert Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'at91-ab-4.11-dt2' of ↵Olof Johansson2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt DT for 4.11 #2: - Enable the DMA on sama5d2 and sama5d4 xplained to fix an issue seen by kernelci * tag 'at91-ab-4.11-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: Enable DMA on sama5d2_xplained console ARM: dts: at91: Enable DMA on sama5d4_xplained console Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'renesas-dt2-for-v4.11' of ↵Olof Johansson6-0/+47
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.11 Enhancements: - Add power-domains to mmcif on r7s72100 SoC - Add OSTM to rskrza1/r7s72100 - Link ARM GIC to clock and clock domain on r8a774[35] SoCs Clean-up: - Correct SATA device status on r8a7779/marzen * tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r7s72100: add power-domains to mmcif ARM: dts: rskrza1: add ostm DT support ARM: dts: r7s72100: add ostm to device tree ARM: dts: r7s72100: add ostm clock to device tree ARM: dts: r8a7745: Link ARM GIC to clock and clock domain ARM: dts: r8a7743: Link ARM GIC to clock and clock domain ARM: dts: r8a7779, marzen: Fix sata device status Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'v4.10-next-dts32' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson4-20/+285
next/dt Lots of updates for mt2701: Rearrange the dt nodes and fix unit address for pincontroler Add nodes for: - clock controller subsystems - scpsys controller - iommu and smi - spi - nand - auxadc - thermal controller and zones Email address updated for mt7623 devicetree files. * tag 'v4.10-next-dts32' of https://github.com/mbgg/linux-mediatek: arm: dts: mt2701: Add thermal device node. arm: dts: mt2701: Add auxadc device node. arm: dts: mt2701: Add nand device node arm: dts: mt2701: Add spi device node ARM: dts: mt2701: add iommu/smi dtsi node for mt2701 ARM: dts: mediatek: update my email address arm: dts: mt2701: Add power domain controller device node arm: dts: mt2701: Add subsystem clock controller device nodes arm: dts: mt2701: Sort DT nodes by register address Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'omap-for-v4.11/dt-signed-v2' of ↵Olof Johansson34-545/+759
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.11 merge window. These changes add earlycon stdout-path propety for the SoCs so far tested with it. The other changes are addition of BeagleBone green and making WLAN work on BeagleBone black wireless and green wireless. The rest of the changes are the usual enabling features on various devices: - Enable devices on am335x-sl50 - Changes to dra7-evm boards to enable enable irqs for dp83867 eth phys, add pinmux configuration for mmc, remov erratum i869 pinmux configurations, disable NAND support because of pin conflict, add pcf8575 used for lcd - Remove NAND partition table for omap3-igep - Configure USB Ethernet MAC from device tree for beagleboard xm, pandaboard, omap5-uevm and igepv5 - Configure am335x-chilisom to wake from RTC-only state - Update Nanobone for external FRAM chip - Clean up n900 dts - Update am335x-phycore and am335x-wega for various devices - Changes for am57xx-beagle-x15 to implement rgmii2 errata * tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits) ARM: dts: dra72/1-evm: add pcf8575 used for lcd ARM: dts: dra7xx: Add stdout-path property ARM: dts: am57xx: Add stdout-path property ARM: dts: am43xx: Add stdout-path property ARM: dts: am33xx: Add stdout-path property ARM: dts: am335x-sl50: Enable the Ambient Light Sensor. ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander. ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock. ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory. ARM: dts: am335x-sl50: Enable UART1. ARM: dts: am335x-sl50: Remove I2C1 node. ARM: dts: omap3-igep: Remove NAND partition table ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to 10/100 Mbps" ARM: dts: am335x-phycore-som: Remove partition tables ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys ARM: dts: Configure BeagleBone peripheral USB VBUS irq ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'davinci-for-v4.11/dt' of ↵Olof Johansson5-6/+461
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt Device tree updates for DaVinci DA850 * GPIO keys on DA850 LCDK * LCDC display on DA850 LCDK * USB OHCI on DA850 LCDK * VPIF (video input) on DA850 LCDK * Add a DA8xx specific compatible for UARTs * Introduce support for Lego Mindstorms EV3 * tag 'davinci-for-v4.11/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: Add LEGO MINDSTORMS EV3 dts dt-bindings: add "microchip,24c128" compatible string dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification dt-bindings: Add vendor prefix for LEGO ARM: dts: da850: Add ti,da830-uart compatible for serial ports ARM: dts: davinci: da850-lcdk: enable VPIF ARM: dts: davinci: da850-evm: enable VPIF ARM: dts: davinci: da850: VPIF: add node and muxing ARM: dts: da850-lcdk: Enable ohci for omapl138 lcdk ARM: dts: da850: Add usb device node ARM: dts: da850: specify the maximum pixel clock rate for tilcdc ARM: dts: da850-lcdk: add the vga-bridge node ARM: dts: da850: rename the display node label ARM: dts: da850-lcdk: add gpio-keys Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'qcom-dts-for-4.11' of ↵Olof Johansson11-47/+559
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm Device Tree Changes for v4.11 * Add Coresight components for APQ8064 * Fixup PM8058 nodes * Add APQ8060 gyro and accel support * Enable SD600 HDMI support * Add RIVA supprort for Sony Yuga and SD600 * Add PM8821 support * Add MSM8974 ADSP, USB gadget, SMD, and SMP2P support * Fix IPQ8064 clock frequencies * tag 'qcom-dts-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: qcom: Add apq8064 CoreSight components ARM: dts: Add gyro and accel to APQ8060 Dragonboard ARM: dts: reference PM8058 as IRQ parent ARM: dts: rename MSM8660/APQ8060 pmicintc to pm8058 ARM: dts: sd-600eval: enable 1.8v regulator on LS expansion ARM: dts: sd-600eval: add hdmi support ARM: dts: move hdmi pinctrl out of board file. ARM: dts: qcom: sd600eval: Enable riva-pil ARM: dts: qcom: sd600-eval: pm8921_s2 regulator properties ARM: dts: qcom: apq8064-sony-yuga: Enable riva-pil ARM: dts: qcom: apq8064: Add riva-pil node ARM: dts: apq8064: add support to pm8821 arm: dts: qcom: Fix ipq board clock rates ARM: dts: msm8974: Remove "unused" reserved region ARM: dts: msm8974: Add ADSP PIL node ARM: dts: msm8974: Add ADSP smp2p and smd nodes ARM: dts: qcom: msm8974: Add USB gadget nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'uniphier-dt-v4.11' of ↵Olof Johansson1-1/+17
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt UniPhier ARM SoC DT updates for v4.11 - Add eMMC, SD pin-mux nodes * tag 'uniphier-dt-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add SD pin-mux node ARM: dts: uniphier: add eMMC pin-mux node Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'keystone_dts_for_4.11' of ↵Olof Johansson8-8/+113
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt ARM: Keystone DTS update for 4.11 Brief: - MSM RAM node support for the Keystone 2 SOCs. - PSC node & reset controller node support for keystone 2 SOCs. - da830 UART node support. * tag 'keystone_dts_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2e: Add PSC reset controller node ARM: dts: keystone-k2l: Add PSC reset controller node ARM: dts: keystone-k2hk: Add PSC reset controller node ARM: dts: keystone: Add PSC node ARM: keystone: dts: fix netcp clocks and add names ARM: dts: keystone-k2g: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2e: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2l: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2hk: Reserve MSM RAM for boot monitor ARM: dts: keystone-k2g: Add MSM RAM node ARM: dts: keystone-k2e: Add MSM RAM node ARM: dts: keystone-k2l: Add MSM RAM node ARM: dts: keystone-k2hk: Add MSM RAM node ARM: dts: keystone: Add "ti,da830-uart" compatible string Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29Merge tag 'v4.11-rockchip-dts32-1' of ↵Olof Johansson37-160/+252
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Bit of cleanup for the cortex-a9 uarts to have that soc-specific spare-compatible as all others have, conversion to gpio constants and addition of rk3288 qos nodes that need to be saved before a power-domain gets turned off. * tag 'v4.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add soc-specific uart compatibles for rk3066/rk3188 ARM: dts: rockchip: use pin constants to describe gpios ARM: dts: rockchip: add qos node for rk3288 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-29ARM: dts: exynos: Fix indentation of EHCI and OHCI portsKrzysztof Kozlowski1-12/+12
Replace spaces with tabs in EHCI and OHCI ports indentation. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2017-01-29ARM: dts: imx53-qsb-common: fix FEC pinmux configPatrick Bruenn1-10/+10
The pinmux configuration in device tree was different from manual muxing in <u-boot>/board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: udoo_neo: Add Bluetooth supportBreno Lima1-0/+32
Udoo Neo has a TI WL1831 Bluetooth chip connected to the UART3 port. Add support for it. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: udoo_neo: Add Wifi supportBreno Lima1-0/+45
Udoo Neo has a TI WL1831 Wifi chip connected to the USDHC3 port. Add support for it. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 supportBreno Lima1-0/+59
Add support for micro USB (OTG1) and USB Host (OTG2) for UDOO Neo board. Tested on a UDOO Neo Full board by mounting a mass storage device on both ports. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: imx6: remove unit address from LDB nodeLucas Stach1-1/+1
The LDB has no reg property as it uses the IOMUX-GPR syscon to access its registers. Remove the unit address from the DT node to make DT compiler happy. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: imx6qp: adapt DT to changed FEC interruptsLucas Stach1-0/+6
On i.MX6QP the FEC interrupts are wired to the GPC, just like all other device interrupts. This allows to FEC to wake the CPU from WFI, but for this to work the kernel needs to know about the new IRQ routing. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5Lucas Stach1-3/+3
Fix the min/max voltage constraints for the anatop 1p1 and 2p5 regulator to match the typical operating range mentioned in the datasheet. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: imx6: fix min/max voltage of anatop 2p5 regulatorLucas Stach1-2/+2
The regulation bound of this regulator are 2.1V to 2.875V, the wrong DT values cause the driver to miscalculate the effective voltage. This isn't really an issue right now, as nobody actively changes the regulator voltage, but better fix it now. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: imx7: Add "LPSR" to LPSR iomux pin namesSascha Hauer6-74/+74
The i.MX7 has two iomux controllers. the iomuxc and the iomuxc_lpsr. In a board dts we have to make sure that both controllers are supplied with the correct pins. It's way too easy to do this wrong since only a look into the reference manual can reveal which pins belong to which controller. To make this clearer add "LPSR" to the pin names which belong to the LPSR controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: imx7d-cl-som: Fix OTG power pinctrlSascha Hauer1-6/+8
GPIO01_IO05 is controlled by the LPSR iomux controller, so attach the corresponding pin to this controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmuxSascha Hauer1-11/+13
The watchdog pin and the pwm output pin are controlled by the iomuxc_lpsr, not the regular iomux, so move the pins there. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29ARM: dts: imx7s-warp: Fix watchdog pinmuxSascha Hauer1-0/+2
The watchdog pin is controlled by the iomuxc_lpsr, not the regular iomux, so move it there. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-28ARM: dts: exynos: Increase MFC left reserved memory region sizeJavier Martinez Canillas1-1/+1
The sizes of the MFC reserved memory regions for CMA are 16 MiB for the left bank and 8 MiB for the right bank. But this isn't enough to decode high resolution videos so increase the size for the left bank to 36 MiB which is enough for 1080p (1920x1080). Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-27ARM: dts: STiH407-family: Add missing pwm irqPatrice Chotard1-0/+1
Add the missing interrupt node to properly probe the pwm device. This fix following error log : [ 0.208119] sti-pwm 9510000.pwm: Failed to obtain IRQ [ 0.222352] pwm-regulator pwm-regulator: Failed to get PWM: -517 Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Signed-aff-by: Patrice CHOTARD <patrice.chotard@st.com>
2017-01-25ARM: tegra: nyan-blaze: Proper pinmux for TPM I2CJerome Coste1-10/+10
This corrects the pinmux for accessing the TPM over the I2C line. Thus, it allows correctly probing the module, that previously failed with I2C errors. Signed-off-by: Jerome Coste <jerome.coste@etu.utc.fr> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: nyan-big: Proper pinmux for TPM I2CPaul Kocialkowski1-10/+10
This corrects the pinmux for accessing the TPM over the I2C line. Thus, it allows correctly probing the module, that previously failed with I2C errors. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: nyan-blaze: Include compatible revisions for proper detectionPaul Kocialkowski1-1/+7
Depthcharge (the payload used with cros devices) will attempt to detect boards using their revision. This includes all the known revisions for the nyan-blaze board so that the dtb can be selected preferably. Defining compatibly revisions allows depthcharge to select the kernel via the revision it detects instead of using the default kernel. This allows having a FIT image with multiple kernels for multiple devices. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: nyan-big: Include compatible revisions for proper detectionPaul Kocialkowski1-1/+5
Depthcharge (the payload used with cros devices) will attempt to detect boards using their revision. This includes all the known revisions for the nyan-big board so that the dtb can be selected preferably. Defining compatibly revisions allows depthcharge to select the kernel via the revision it detects instead of using the default kernel. This allows having a FIT image with multiple kernels for multiple devices. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: nyan: Use external control for bq24735 chargerPaul Kocialkowski1-0/+1
Nyan boards come with an embedded controller that controls when to enable and disable the charge. Thus, it should not be left up to the kernel to handle that. Using the ti,external-control property allows specifying this use-case. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: nyan: Use proper IRQ type definitionsPaul Kocialkowski1-2/+2
This switches a few interrupt definitions that were using GPIO_ACTIVE_HIGH as IRQ type, which is invalid. This is mostly a cosmetic change, that doesn't affect any driver. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: dts: r7s72100: add power-domains to mmcifChris Brandt1-0/+1
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-25ARM: dts: tegra: Fix missing card detection in Trimslice µSD card slotRask Ingemann Lambertsen1-0/+1
Card insertion and removal currently goes undetected. AFAIK there's no way to generate interrupts on card changes in this slot, so use polling. Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: paz00: Mark panel regulator as enabled on bootMarc Dietrich1-0/+1
Current U-Boot enables the display already. Marking the regulator as enabled on boot fixes sporadic panel initialization failures. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Tested-by: Misha Komarovskiy <zombah@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: apalis-tk1: Update compatibility commentMarcel Ziswiler1-1/+1
Now with the new V1.1A HW card detect being implemented update resp. compatibility information. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HWMarcel Ziswiler1-8/+2
Add SD card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: apalis-tk1: Adjust pin muxing for v1.1 HWMarcel Ziswiler1-30/+23
Configure Apalis MMC1 D6 GPIO on SDMMC3_CLK_LB_IN as reserved function without any pull-up/down. Configure GPIO_PV2 as SD1_CD# according to latest V1.1 HW. Leave SDMMC3_CLK_LB_OUT muxed as SDMMC3 with output driver enabled aka not tristated and input driver enabled as well as it features some magic properties even though the external loopback is disabled and the internal loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being set to 0xfffd according to the TRM! This pin is now a not-connect on V1.1 HW in order to avoid any interference. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: apalis-tk1: Optional DisplayPort hot-plug detectMarcel Ziswiler1-1/+1
Configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-25ARM: tegra: apalis-tk1: Pull-up temperature alertMarcel Ziswiler1-2/+2
Pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2#. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-24ARM: dts: rskrza1: add ostm DT supportChris Brandt1-0/+8
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-24ARM: dts: r7s72100: add ostm to device treeChris Brandt1-0/+18
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-24ARM: dts: r7s72100: add ostm clock to device treeChris Brandt1-0/+9
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-24arm: dts: mt2701: Add thermal device node.Dawei Chien1-0/+43
Add thermal controller device nodes for MT2701. Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2017-01-24ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial supportJagan Teki2-0/+80
Engicam Is.IoT MX6UL has separate module for NAND, so add nand dts file for imx6ul-isiot.dtsi. dmesg: ----- nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAH4 nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 gpmi-nand 1806000.gpmi-nand: enable the asynchronous EDO mode 5 gpmi-nand 1806000.gpmi-nand: driver registered. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-24ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial supportJagan Teki3-6/+78
Engicam Is.IoT MX6UL has separate module for eMMC, so add emmc dts file for imx6ul-isiot.dtsi, usdhc2 node represent eMMC. dmesg: ----- mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA mmc1: new DDR MMC card at address 0001 mmcblk1: mmc1:0001 M62704 3.53 GiB Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-18 08:39:45 +0000