Age | Commit message (Collapse) | Author | Files | Lines |
|
Move the sanity check that hardware never sets bits that collide with KVM-
define synthetic bits from kvm_mmu_page_fault() to npf_interception(),
i.e. make the sanity check #NPF specific. The legacy #PF path already
WARNs if _any_ of bits 63:32 are set, and the error code that comes from
VMX's EPT Violatation and Misconfig is 100% synthesized (KVM morphs VMX's
EXIT_QUALIFICATION into error code flags).
Add a compile-time assert in the legacy #PF handler to make sure that KVM-
define flags are covered by its existing sanity check on the upper bits.
Opportunistically add a description of PFERR_IMPLICIT_ACCESS, since we
are removing the comment that defined it.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20240228024147.41573-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Define more #NPF error code flags that are relevant to SEV+ (mostly SNP)
guests, as specified by the APM:
* Bit 31 (RMP): Set to 1 if the fault was caused due to an RMP check or a
VMPL check failure, 0 otherwise.
* Bit 34 (ENC): Set to 1 if the guest’s effective C-bit was 1, 0 otherwise.
* Bit 35 (SIZEM): Set to 1 if the fault was caused by a size mismatch between
PVALIDATE or RMPADJUST and the RMP, 0 otherwise.
* Bit 36 (VMPL): Set to 1 if the fault was caused by a VMPL permission
check failure, 0 otherwise.
Note, the APM is *extremely* misleading, and strongly implies that the
above flags can _only_ be set for #NPF exits from SNP guests. That is a
lie, as bit 34 (C-bit=1, i.e. was encrypted) can be set when running _any_
flavor of SEV guest on SNP capable hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240228024147.41573-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Open code the bit number directly in the PFERR_* masks and drop the
intermediate PFERR_*_BIT defines, as having to bounce through two macros
just to see which flag corresponds to which bit is quite annoying, as is
having to define two macros just to add recognition of a new flag.
Use ternary operator to derive the bit in permission_fault(), the one
function that actually needs the bit number as part of clever shifting
to avoid conditional branches. Generally the compiler is able to turn
it into a conditional move, and if not it's not really a big deal.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240228024147.41573-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For configurations that have the kconfig option NUMA_KEEP_MEMINFO
disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1).
SRAT lookup fails then because an existing SRAT memory range cannot be
found for a CFMWS address range. This causes the addition of a
duplicate numa_memblk with a different node id and a subsequent page
fault and kernel crash during boot.
Fix this by making numa_fill_memblks() always available regardless of
NUMA_KEEP_MEMINFO.
As Dan suggested, the fix is implemented to remove numa_fill_memblks()
from sparsemem.h and alos using __weak for the function.
Note that the issue was initially introduced with [1]. But since
phys_to_target_node() was originally used that returned the valid node
0, an additional numa_memblk was not added. Though, the node id was
wrong too, a message is seen then in the logs:
kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
[1] commit fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/
Fixes: 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CONFIG_BASE_SMALL is currently a type int but is only used as a boolean.
So, change its type to bool and adapt all usages:
CONFIG_BASE_SMALL == 0 becomes !IS_ENABLED(CONFIG_BASE_SMALL) and
CONFIG_BASE_SMALL != 0 becomes IS_ENABLED(CONFIG_BASE_SMALL).
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Link: https://lore.kernel.org/r/20240505080343.1471198-3-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
It is unused.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240506122848.20326-1-bp@kernel.org
|
|
Allow page_table_check hooks to check over userfaultfd wr-protect criteria
upon pgtable updates. The rule is no co-existance allowed for any
writable flag against userfault wr-protect flag.
This should be better than c2da319c2e, where we used to only sanitize such
issues during a pgtable walk, but when hitting such issue we don't have a
good chance to know where does that writable bit came from [1], so that
even the pgtable walk exposes a kernel bug (which is still helpful on
triaging) but not easy to track and debug.
Now we switch to track the source. It's much easier too with the recent
introduction of page table check.
There are some limitations with using the page table check here for
userfaultfd wr-protect purpose:
- It is only enabled with explicit enablement of page table check configs
and/or boot parameters, but should be good enough to track at least
syzbot issues, as syzbot should enable PAGE_TABLE_CHECK[_ENFORCED] for
x86 [1]. We used to have DEBUG_VM but it's now off for most distros,
while distros also normally not enable PAGE_TABLE_CHECK[_ENFORCED], which
is similar.
- It conditionally works with the ptep_modify_prot API. It will be
bypassed when e.g. XEN PV is enabled, however still work for most of the
rest scenarios, which should be the common cases so should be good
enough.
- Hugetlb check is a bit hairy, as the page table check cannot identify
hugetlb pte or normal pte via trapping at set_pte_at(), because of the
current design where hugetlb maps every layers to pte_t... For example,
the default set_huge_pte_at() can invoke set_pte_at() directly and lose
the hugetlb context, treating it the same as a normal pte_t. So far it's
fine because we have huge_pte_uffd_wp() always equals to pte_uffd_wp() as
long as supported (x86 only). It'll be a bigger problem when we'll
define _PAGE_UFFD_WP differently at various pgtable levels, because then
one huge_pte_uffd_wp() per-arch will stop making sense first.. as of now
we can leave this for later too.
This patch also removes commit c2da319c2e altogether, as we have something
better now.
[1] https://lore.kernel.org/all/000000000000dce0530615c89210@google.com/
Link: https://lkml.kernel.org/r/20240417212549.2766883-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The per-architecture fbdev code has no dependencies on fbdev and can
be used for any video-related subsystem. Rename the files to 'video'.
Use video-sti.c on parisc as the source file depends on CONFIG_STI_CORE.
On arc, arm, arm64, sh, and um the asm header file is an empty wrapper
around the file in asm-generic. Let Kbuild generate the file. The build
system does this automatically. Only um needs to generate video.h
explicitly, so that it overrides the host architecture's header. The
latter would otherwise interfere with the build.
Further update all includes statements, include guards, and Makefiles.
Also update a few strings and comments to refer to video instead of
fbdev.
v3:
- arc, arm, arm64, sh: generate asm header via build system (Sam,
Helge, Arnd)
- um: rename fb.h to video.h
- fix typo in commit message (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The per-architecture video helpers do not depend on struct fb_info
or anything else from fbdev. Remove it from the interface and replace
fb_is_primary_device() with video_is_primary_device(). The new helper
is similar in functionality, but can operate on non-fbdev devices.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We are going to fix perf-events fallout of changes in tip:x86/cpu,
so merge in that branch first.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Intel Advanced Performance Extensions (APX) extends the EVEX prefix to
support:
- extended general purpose registers (EGPRs) i.e. r16 to r31
- Push-Pop Acceleration (PPX) hints
- new data destination (NDD) register
- suppress status flags writes (NF) of common instructions
- new instructions
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
The extended EVEX prefix does not need amended instruction decoder logic,
except in one area. Some instructions are defined as SCALABLE which means
the EVEX.W bit and EVEX.pp bits are used to determine operand size.
Specifically, if an instruction is SCALABLE and EVEX.W is zero, then
EVEX.pp value 0 (representing no prefix NP) means default operand size,
whereas EVEX.pp value 1 (representing 66 prefix) means operand size
override i.e. 16 bits
Add an attribute (INAT_EVEX_SCALABLE) to identify such instructions, and
amend the logic appropriately.
Amend the awk script that generates the attribute tables from the opcode
map, to recognise "(es)" as attribute INAT_EVEX_SCALABLE.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-8-adrian.hunter@intel.com
|
|
Intel Advanced Performance Extensions (APX) uses a new 2-byte prefix named
REX2 to select extended general purpose registers (EGPRs) i.e. r16 to r31.
The REX2 prefix is effectively an extended version of the REX prefix.
REX2 and EVEX are also used with PUSH/POP instructions to provide a
Push-Pop Acceleration (PPX) hint. With PPX hints, a CPU will attempt to
fast-forward register data between matching PUSH and POP instructions.
REX2 is valid only with opcodes in maps 0 and 1. Similar extension for
other maps is provided by the EVEX prefix, covered in a separate patch.
Some opcodes in maps 0 and 1 are reserved under REX2. One of these is used
for a new 64-bit absolute direct jump instruction JMPABS.
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
Define a code value for the REX2 prefix (INAT_PFX_REX2), and add attribute
flags for opcodes reserved under REX2 (INAT_NO_REX2) and to identify
opcodes (only JMPABS) that require a mandatory REX2 prefix
(INAT_REX2_VARIANT).
Amend logic to read the REX2 prefix and get the opcode attribute for the
map number (0 or 1) encoded in the REX2 prefix.
Amend the awk script that generates the attribute tables from the opcode
map, to recognise "REX2" as attribute INAT_PFX_REX2, and "(!REX2)"
as attribute INAT_NO_REX2, and "(REX2)" as attribute INAT_REX2_VARIANT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-6-adrian.hunter@intel.com
|
|
The syzbot-reported stack trace from hell in this discussion thread
actually has three nested page faults:
https://lore.kernel.org/r/000000000000d5f4fc0616e816d4@google.com
... and I think that's actually the important thing here:
- the first page fault is from user space, and triggers the vsyscall
emulation.
- the second page fault is from __do_sys_gettimeofday(), and that should
just have caused the exception that then sets the return value to
-EFAULT
- the third nested page fault is due to _raw_spin_unlock_irqrestore() ->
preempt_schedule() -> trace_sched_switch(), which then causes a BPF
trace program to run, which does that bpf_probe_read_compat(), which
causes that page fault under pagefault_disable().
It's quite the nasty backtrace, and there's a lot going on.
The problem is literally the vsyscall emulation, which sets
current->thread.sig_on_uaccess_err = 1;
and that causes the fixup_exception() code to send the signal *despite* the
exception being caught.
And I think that is in fact completely bogus. It's completely bogus
exactly because it sends that signal even when it *shouldn't* be sent -
like for the BPF user mode trace gathering.
In other words, I think the whole "sig_on_uaccess_err" thing is entirely
broken, because it makes any nested page-faults do all the wrong things.
Now, arguably, I don't think anybody should enable vsyscall emulation any
more, but this test case clearly does.
I think we should just make the "send SIGSEGV" be something that the
vsyscall emulation does on its own, not this broken per-thread state for
something that isn't actually per thread.
The x86 page fault code actually tried to deal with the "incorrect nesting"
by having that:
if (in_interrupt())
return;
which ignores the sig_on_uaccess_err case when it happens in interrupts,
but as shown by this example, these nested page faults do not need to be
about interrupts at all.
IOW, I think the only right thing is to remove that horrendously broken
code.
The attached patch looks like the ObviouslyCorrect(tm) thing to do.
NOTE! This broken code goes back to this commit in 2011:
4fc3490114bb ("x86-64: Set siginfo and context on vsyscall emulation faults")
... and back then the reason was to get all the siginfo details right.
Honestly, I do not for a moment believe that it's worth getting the siginfo
details right here, but part of the commit says:
This fixes issues with UML when vsyscall=emulate.
... and so my patch to remove this garbage will probably break UML in this
situation.
I do not believe that anybody should be running with vsyscall=emulate in
2024 in the first place, much less if you are doing things like UML. But
let's see if somebody screams.
Reported-and-tested-by: syzbot+83e7f982ca045ab4405c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/CAHk-=wh9D6f7HUkDgZHKmDCHUQmp+Co89GP+b8+z+G56BKeyNg@mail.gmail.com
|
|
The function acpi_blacklisted() is defined only when CONFIG_X86 is
enabled and is only used by X86 arch code. To align with its usage and
definition conditions, move its declaration to asm/acpi.h
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Added empty code line in a header file ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a command line opt-in option for posted MSI if CONFIG_X86_POSTED_MSI=y.
Also introduce a helper function for testing if posted MSI is supported on
the platform.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-12-jacob.jun.pan@linux.intel.com
|
|
During interrupt affinity change, it is possible to have interrupts delivered
to the old CPU after the affinity has changed to the new one. To prevent lost
interrupts, local APIC IRR is checked on the old CPU. Similar checks must be
done for posted MSIs given the same reason.
Consider the following scenario:
Device system agent iommu memory CPU/LAPIC
1 FEEX_XXXX
2 Interrupt request
3 Fetch IRTE ->
4 ->Atomic Swap PID.PIR(vec)
Push to Global Observable(GO)
5 if (ON*)
done;*
else
6 send a notification ->
* ON: outstanding notification, 1 will suppress new notifications
If the affinity change happens between 3 and 5 in the IOMMU, the old CPU's
posted interrupt request (PIR) could have the pending bit set for the
vector being moved.
Add a helper function to check individual vector status. Then use the
helper to check for pending interrupts on the source CPU's PID.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-11-jacob.jun.pan@linux.intel.com
|
|
Use a common function for checking pending interrupt vector in APIC IRR
instead of duplicated open coding them.
Additional checks for posted MSI vectors can then be contained in this
function.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-10-jacob.jun.pan@linux.intel.com
|
|
All MSI vectors are multiplexed into a single notification vector when
posted MSI is enabled. It is the responsibility of the notification vector
handler to demultiplex MSI vectors. In the handler the MSI vector handlers
are dispatched without IDT delivery for each pending MSI interrupt.
For example, the interrupt flow will change as follows:
(3 MSIs of different vectors arrive in a a high frequency burst)
BEFORE:
interrupt(MSI)
irq_enter()
handler() /* EOI */
irq_exit()
process_softirq()
interrupt(MSI)
irq_enter()
handler() /* EOI */
irq_exit()
process_softirq()
interrupt(MSI)
irq_enter()
handler() /* EOI */
irq_exit()
process_softirq()
AFTER:
interrupt /* Posted MSI notification vector */
irq_enter()
atomic_xchg(PIR)
handler()
handler()
handler()
pi_clear_on()
apic_eoi()
irq_exit()
process_softirq()
Except for the leading MSI, CPU notifications are skipped/coalesced.
For MSIs which arrive at a low frequency, the demultiplexing loop does not
wait for more interrupts to coalesce. Therefore, there's no additional
latency other than the processing time.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-9-jacob.jun.pan@linux.intel.com
|
|
To support posted MSIs, create a posted interrupt descriptor (PID) for each
host CPU. Later on, when setting up interrupt affinity, the IOMMU's
interrupt remapping table entry (IRTE) will point to the physical address
of the matching CPU's PID.
Each PID is initialized with the owner CPU's physical APICID as the
destination.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-7-jacob.jun.pan@linux.intel.com
|
|
When posted MSI is enabled, all device MSIs are multiplexed into a single
notification vector. MSI handlers will be de-multiplexed at run-time by
system software without IDT delivery.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-6-jacob.jun.pan@linux.intel.com
|
|
Mixture of bitfields and types is weird and really not intuitive, remove
bitfields and use typed data exclusively. Bitfields often result in
inferior machine code.
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-4-jacob.jun.pan@linux.intel.com
Link: https://lore.kernel.org/all/20240404101735.402feec8@jacob-builder/T/#mf66e34a82a48f4d8e2926b5581eff59a122de53a
|
|
Make the PIR field into u64 such that atomic xchg64 can be used without
ugly casting.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-3-jacob.jun.pan@linux.intel.com
|
|
To prepare native usage of posted interrupts, move the PID declarations out
of VMX code such that they can be shared.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240423174114.526704-2-jacob.jun.pan@linux.intel.com
|
|
Handle cases where the RMP table placement in the BIOS is not 2M aligned
and the kexec-ed kernel could try to allocate from within that chunk
which then causes a fatal RMP fault.
The kexec failure is illustrated below:
SEV-SNP: RMP table physical range [0x0000007ffe800000 - 0x000000807f0fffff]
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
...
BIOS-e820: [mem 0x0000004080000000-0x0000007ffe7fffff] usable
BIOS-e820: [mem 0x0000007ffe800000-0x000000807f0fffff] reserved
BIOS-e820: [mem 0x000000807f100000-0x000000807f1fefff] usable
As seen here in the e820 memory map, the end range of the RMP table is not
aligned to 2MB and not reserved but it is usable as RAM.
Subsequently, kexec -s (KEXEC_FILE_LOAD syscall) loads it's purgatory
code and boot_param, command line and other setup data into this RAM
region as seen in the kexec logs below, which leads to fatal RMP fault
during kexec boot.
Loaded purgatory at 0x807f1fa000
Loaded boot_param, command line and misc at 0x807f1f8000 bufsz=0x1350 memsz=0x2000
Loaded 64bit kernel at 0x7ffae00000 bufsz=0xd06200 memsz=0x3894000
Loaded initrd at 0x7ff6c89000 bufsz=0x4176014 memsz=0x4176014
E820 memmap:
0000000000000000-000000000008efff (1)
000000000008f000-000000000008ffff (4)
0000000000090000-000000000009ffff (1)
...
0000004080000000-0000007ffe7fffff (1)
0000007ffe800000-000000807f0fffff (2)
000000807f100000-000000807f1fefff (1)
000000807f1ff000-000000807fffffff (2)
nr_segments = 4
segment[0]: buf=0x00000000e626d1a2 bufsz=0x4000 mem=0x807f1fa000 memsz=0x5000
segment[1]: buf=0x0000000029c67bd6 bufsz=0x1350 mem=0x807f1f8000 memsz=0x2000
segment[2]: buf=0x0000000045c60183 bufsz=0xd06200 mem=0x7ffae00000 memsz=0x3894000
segment[3]: buf=0x000000006e54f08d bufsz=0x4176014 mem=0x7ff6c89000 memsz=0x4177000
kexec_file_load: type:0, start:0x807f1fa150 head:0x1184d0002 flags:0x0
Check if RMP table start and end physical range in the e820 tables are
not aligned to 2MB and in that case map this range to reserved in all
the three e820 tables.
[ bp: Massage. ]
Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/df6e995ff88565262c2c7c69964883ff8aa6fc30.1714090302.git.ashish.kalra@amd.com
|
|
Add a new API helper e820__range_update_table() with which to update an
arbitrary e820 table. Move all current users of
e820__range_update_kexec() to this new helper.
[ bp: Massage. ]
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/b726af213ad55053f8a7a1e793b01bb3f1ca9dd5.1714090302.git.ashish.kalra@amd.com
|
|
When memory is being placed, mmap() will take care to respect the guard
gaps of certain types of memory (VM_SHADOWSTACK, VM_GROWSUP and
VM_GROWSDOWN). In order to ensure guard gaps between mappings, mmap()
needs to consider two things:
1. That the new mapping isn't placed in an any existing mappings guard
gaps.
2. That the new mapping isn't placed such that any existing mappings
are not in *its* guard gaps.
The longstanding behavior of mmap() is to ensure 1, but not take any care
around 2. So for example, if there is a PAGE_SIZE free area, and a mmap()
with a PAGE_SIZE size, and a type that has a guard gap is being placed,
mmap() may place the shadow stack in the PAGE_SIZE free area. Then the
mapping that is supposed to have a guard gap will not have a gap to the
adjacent VMA.
Add x86 arch implementations of arch_get_unmapped_area_vmflags/_topdown()
so future changes can allow the guard gap of type of vma being placed to
be taken into account. This will be used for shadow stack memory.
Link: https://lkml.kernel.org/r/20240326021656.202649-13-rick.p.edgecombe@intel.com
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comment in the code explains the reasons. We took a different
approach comparing to pmd_pfn() by providing a fallback function.
Another option is to provide some lower level config options (compare to
HUGETLB_PAGE or THP) to identify which layer an arch can support for such
huge mappings. However that can be an overkill.
[peterx@redhat.com: fix loongson defconfig]
Link: https://lkml.kernel.org/r/20240403013249.1418299-4-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240327152332.950956-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/mm_init.c: refactor free_area_init_core()".
In function free_area_init_core(), the code calculating
zone->managed_pages and the subtracting dma_reserve from DMA zone looks
very confusing.
From git history, the code calculating zone->managed_pages was for
zone->present_pages originally. The early rough assignment is for
optimize zone's pcp and water mark setting. Later, managed_pages was
introduced into zone to represent the number of managed pages by buddy.
Now, zone->managed_pages is zeroed out and reset in mem_init() when
calling memblock_free_all(). zone's pcp and wmark setting relying on
actual zone->managed_pages are done later than mem_init() invocation. So
we don't need rush to early calculate and set zone->managed_pages, just
set it as zone->present_pages, will adjust it in mem_init().
And also add a new function calc_nr_kernel_pages() to count up free but
not reserved pages in memblock, then assign it to nr_all_pages and
nr_kernel_pages after memmap pages are allocated.
This patch (of 6):
Variable dma_reserve and its usage was introduced in commit 0e0b864e069c
("[PATCH] Account for memmap and optionally the kernel image as holes").
Its original purpose was to accounting for the reserved pages in DMA zone
to make DMA zone's watermarks calculation more accurate on x86.
However, currently there's zone->managed_pages to account for all
available pages for buddy, zone->present_pages to account for all present
physical pages in zone. What is more important, on x86, calculating and
setting the zone->managed_pages is a temporary move, all zone's
managed_pages will be zeroed out and reset to the actual value according
to how many pages are added to buddy allocator in mem_init(). Before
mem_init(), no buddy alloction is requested. And zone's pcp and watermark
setting are all done after mem_init(). So, no need to worry about the DMA
zone's setting accuracy during free_area_init().
Hence, remove memblock_find_dma_reserve() to stop calculating and
setting dma_reserve.
Link: https://lkml.kernel.org/r/20240325145646.1044760-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240325145646.1044760-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Memory allocation profiling", v6.
Overview:
Low overhead [1] per-callsite memory allocation profiling. Not just for
debug kernels, overhead low enough to be deployed in production.
Example output:
root@moria-kvm:~# sort -rn /proc/allocinfo
127664128 31168 mm/page_ext.c:270 func:alloc_page_ext
56373248 4737 mm/slub.c:2259 func:alloc_slab_page
14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded
14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash
13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio
9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node
4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
3940352 962 mm/memory.c:4214 func:alloc_anon_folio
2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
...
Usage:
kconfig options:
- CONFIG_MEM_ALLOC_PROFILING
- CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
- CONFIG_MEM_ALLOC_PROFILING_DEBUG
adds warnings for allocations that weren't accounted because of a
missing annotation
sysctl:
/proc/sys/vm/mem_profiling
Runtime info:
/proc/allocinfo
Notes:
[1]: Overhead
To measure the overhead we are comparing the following configurations:
(1) Baseline with CONFIG_MEMCG_KMEM=n
(2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)
(3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y)
(4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1)
(5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT
(6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y
(7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y
Performance overhead:
To evaluate performance we implemented an in-kernel test executing
multiple get_free_page/free_page and kmalloc/kfree calls with allocation
sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU
affinity set to a specific CPU to minimize the noise. Below are results
from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on
56 core Intel Xeon:
kmalloc pgalloc
(1 baseline) 6.764s 16.902s
(2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%)
(3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%)
(4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%)
(5 memcg) 13.388s (+97.94%) 48.460s (+186.71%)
(6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%)
(7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%)
Memory overhead:
Kernel size:
text data bss dec diff
(1) 26515311 18890222 17018880 62424413
(2) 26524728 19423818 16740352 62688898 264485
(3) 26524724 19423818 16740352 62688894 264481
(4) 26524728 19423818 16740352 62688898 264485
(5) 26541782 18964374 16957440 62463596 39183
Memory consumption on a 56 core Intel CPU with 125GB of memory:
Code tags: 192 kB
PageExts: 262144 kB (256MB)
SlabExts: 9876 kB (9.6MB)
PcpuExts: 512 kB (0.5MB)
Total overhead is 0.2% of total memory.
Benchmarks:
Hackbench tests run 100 times:
hackbench -s 512 -l 200 -g 15 -f 25 -P
baseline disabled profiling enabled profiling
avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023)
stdev 0.0137 0.0188 0.0077
hackbench -l 10000
baseline disabled profiling enabled profiling
avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859)
stdev 0.0933 0.0286 0.0489
stress-ng tests:
stress-ng --class memory --seq 4 -t 60
stress-ng --class cpu --seq 4 -t 60
Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/
[2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/
This patch (of 37):
The next patch drops vmalloc.h from a system header in order to fix a
circular dependency; this adds it to all the files that were pulling it in
implicitly.
[kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c]
Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev
[surenb@google.com: fix arch/x86/mm/numa_32.c]
Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com
[kent.overstreet@linux.dev: a few places were depending on sizes.h]
Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev
[arnd@arndb.de: fix mm/kasan/hw_tags.c]
Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org
[surenb@google.com: fix arc build]
Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ending a struct name with "layout" is a little redundant, so shorten the
snp_secrets_page_layout name to just snp_secrets_page.
No functional change.
[ bp: Rename the local pointer to "secrets" too for more clarity. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/bc8d58302c6ab66c3beeab50cce3ec2c6bd72d6c.1713974291.git.thomas.lendacky@amd.com
|
|
The TDX guest platform takes one bit from the physical address to
indicate if the page is shared (accessible by VMM). This bit is not part
of the physical_mask and is not preserved during mprotect(). As a
result, the 'shared' bit is lost during mprotect() on shared mappings.
_COMMON_PAGE_CHG_MASK specifies which PTE bits need to be preserved
during modification. AMD includes 'sme_me_mask' in the define to
preserve the 'encrypt' bit.
To cover both Intel and AMD cases, include 'cc_mask' in
_COMMON_PAGE_CHG_MASK instead of 'sme_me_mask'.
Reported-and-tested-by: Chris Oo <cho@microsoft.com>
Fixes: 41394e33f3a0 ("x86/tdx: Extend the confidential computing API to support TDX guests")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240424082035.4092071-1-kirill.shutemov%40linux.intel.com
|
|
Use _Q_LOCKED_VAL instead of hardcoded $0x1 in PV_UNLOCK_ASM macro.
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240422151752.53997-1-ubizjak@gmail.com
|
|
Optimize virt_spin_lock() to use simpler and faster:
atomic_try_cmpxchg(*ptr, &val, new)
instead of:
atomic_cmpxchg(*ptr, val, new) == val
The x86 CMPXCHG instruction returns success in the ZF flag, so
this change saves a compare after the CMPXCHG.
Also optimize retry loop a bit. atomic_try_cmpxchg() fails iff
&lock->val != 0, so there is no need to load and compare the
lock value again - cpu_relax() can be unconditinally called in
this case. This allows us to generate optimized:
1f: ba 01 00 00 00 mov $0x1,%edx
24: 8b 03 mov (%rbx),%eax
26: 85 c0 test %eax,%eax
28: 75 63 jne 8d <...>
2a: f0 0f b1 13 lock cmpxchg %edx,(%rbx)
2e: 75 5d jne 8d <...>
...
8d: f3 90 pause
8f: eb 93 jmp 24 <...>
instead of:
1f: ba 01 00 00 00 mov $0x1,%edx
24: 8b 03 mov (%rbx),%eax
26: 85 c0 test %eax,%eax
28: 75 13 jne 3d <...>
2a: f0 0f b1 13 lock cmpxchg %edx,(%rbx)
2e: 85 c0 test %eax,%eax
30: 75 f2 jne 24 <...>
...
3d: f3 90 pause
3f: eb e3 jmp 24 <...>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240422120054.199092-1-ubizjak@gmail.com
|
|
__arch{,_try}_cmpxchg64_emu()
Macros __arch{,_try}_cmpxchg64_emu() are almost identical to their
local variants __arch{,_try}_cmpxchg64_emu_local(), differing only
by lock prefixes.
Merge these two macros by introducing additional macro parameters
to pass lock location and lock prefix from their respective static
inline functions.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20240417175830.161561-1-ubizjak@gmail.com
|
|
Commit a72bbec70da2 ("crash: hotplug support for kexec_load()")
introduced a new kexec flag, `KEXEC_UPDATE_ELFCOREHDR`. Kexec tool uses
this flag to indicate to the kernel that it is safe to modify the
elfcorehdr of the kdump image loaded using the kexec_load system call.
However, it is possible that architectures may need to update kexec
segments other then elfcorehdr. For example, FDT (Flatten Device Tree)
on PowerPC. Introducing a new kexec flag for every new kexec segment
may not be a good solution. Hence, a generic kexec flag bit,
`KEXEC_CRASH_HOTPLUG_SUPPORT`, is introduced to share the CPU/Memory
hotplug support intent between the kexec tool and the kernel for the
kexec_load system call.
Now we have two kexec flags that enables crash hotplug support for
kexec_load system call. First is KEXEC_UPDATE_ELFCOREHDR (only used in
x86), and second is KEXEC_CRASH_HOTPLUG_SUPPORT (for all architectures).
To simplify the process of finding and reporting the crash hotplug
support the following changes are introduced.
1. Define arch specific function to process the kexec flags and
determine crash hotplug support
2. Rename the @update_elfcorehdr member of struct kimage to
@hotplug_support and populate it for both kexec_load and
kexec_file_load syscalls, because architecture can update more than
one kexec segment
3. Let generic function crash_check_hotplug_support report hotplug
support for loaded kdump image based on value of @hotplug_support
To bring the x86 crash hotplug support in line with the above points,
the following changes have been made:
- Introduce the arch_crash_hotplug_support function to process kexec
flags and determine crash hotplug support
- Remove the arch_crash_hotplug_[cpu|memory]_support functions
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-3-sourabhjain@linux.ibm.com
|
|
In the event of memory hotplug or online/offline events, the crash
memory hotplug notifier `crash_memhp_notifier()` receives a
`memory_notify` object but doesn't forward that object to the
generic and architecture-specific crash hotplug handler.
The `memory_notify` object contains the starting PFN (Page Frame Number)
and the number of pages in the hot-removed memory. This information is
necessary for architectures like PowerPC to update/recreate the kdump
image, specifically `elfcorehdr`.
So update the function signature of `crash_handle_hotplug_event()` and
`arch_crash_handle_hotplug_event()` to accept the `memory_notify` object
as an argument from crash memory hotplug notifier.
Since no such object is available in the case of CPU hotplug event, the
crash CPU hotplug notifier `crash_cpuhp_online()` passes NULL to the
crash hotplug handler.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-2-sourabhjain@linux.ibm.com
|
|
Start switching iomap_copy routines over to use #define and arch provided
inline/macro functions instead of weak symbols.
Inline functions allow more compiler optimization and this is often a
driver hot path.
x86 has the only weak implementation for __iowrite32_copy(), so replace it
with a static inline containing the same single instruction inline
assembly. The compiler will generate the "mov edx,ecx" in a more optimal
way.
Remove iomap_copy_64.S
Link: https://lore.kernel.org/r/1-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
New CPU #defines encode vendor and family as well as model.
Update the example usage comment in arch/x86/kernel/cpu/match.c
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-4-tony.luck@intel.com
|
|
To avoid adding a slew of new macros for each new Intel CPU family
switch over from providing CPU model number #defines to a new
scheme that encodes vendor, family, and model in a single number.
[ bp: s/casted/cast/g ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-3-tony.luck@intel.com
|
|
Refactor struct cpuinfo_x86 so that the vendor, family, and model
fields are overlaid in a union with a 32-bit field that combines
all three (together with a one byte reserved field in the upper
byte).
This will make it easy, cheap, and reliable to check all three
values at once.
See
https://lore.kernel.org/r/Zgr6kT8oULbnmEXx@agluck-desk3
for why the ordering is (low-to-high bits):
(vendor, family, model)
[ bp: Move comments over the line, add the backstory about the
particular order of the fields. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416211941.9369-2-tony.luck@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Add a missing memory barrier in the concurrency ID mm switching
* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Add missing memory barrier in switch_mm_cid
|
|
Pull kvm fixes from Paolo Bonzini:
"This is a bit on the large side, mostly due to two changes:
- Changes to disable some broken PMU virtualization (see below for
details under "x86 PMU")
- Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
return thunk in use. This should not happen!" when running KVM
selftests.
Everything else is small bugfixes and selftest changes:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
where KVM would allow userspace to refresh the cache with a bogus
GPA. The bug has existed for quite some time, but was exposed by a
new sanity check added in 6.9 (to ensure a cache is either
GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
got left behind during a 6.9 cleanup.
- Fix a math goof in x86's hugepage logic for
KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
(detected by KASAN).
- Fix a bug where KVM incorrectly clears root_role.direct when
userspace sets guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect
SPTEs used by a nested guest, if KVM is using Page-Modification
Logging and the nested hypervisor is NOT using EPT.
x86 PMU:
- Drop support for virtualizing adaptive PEBS, as KVM's
implementation is architecturally broken without an obvious/easy
path forward, and because exposing adaptive PEBS can leak host LBRs
to the guest, i.e. can leak host kernel addresses to the guest.
- Set the enable bits for general purpose counters in
PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
processors.
- Disable LBR virtualization on CPUs that don't support LBR
callstacks, as KVM unconditionally uses
PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
would fail on such CPUs.
Tests:
- Fix a flaw in the max_guest_memory selftest that results in it
exhausting the supply of ucall structures when run with more than
256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in
set_memory_region_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
perf/x86/intel: Expose existence of callback support to KVM
KVM: VMX: Snapshot LBR capabilities during module initialization
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
KVM: SVM: Remove a useless zeroing of allocated memory
...
|
|
Dump the contents of the #VE info data structure and assert that #VE does
not happen, but do not yet do anything with it.
No functional change intended, separated for clarity only.
Extracted from a patch by Isaku Yamahata <isaku.yamahata@intel.com>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TDX will use a different shadow PTE entry value for MMIO from VMX. Add a
member to kvm_arch and track value for MMIO per-VM instead of a global
variable. By using the per-VM EPT entry value for MMIO, the existing VMX
logic is kept working. Introduce a separate setter function so that guest
TD can use a different value later.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <229a18434e5d83f45b1fcd7bf1544d79db1becb6.1705965635.git.isaku.yamahata@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
To make use of the same value of shadow_mmio_mask and shadow_present_mask
for TDX and VMX, add Suppress-VE bit to shadow_mmio_mask and
shadow_present_mask so that they can be common for both VMX and TDX.
TDX will require shadow_mmio_mask and shadow_present_mask to include
VMX_SUPPRESS_VE for shared GPA so that EPT violation is triggered for
shared GPA. For VMX, VMX_SUPPRESS_VE doesn't matter for MMIO because the
spte value is defined so as to cause EPT misconfig.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <97cc616b3563cd8277be91aaeb3e14bce23c3649.1705965635.git.isaku.yamahata@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull fix for SEV-SNP late disable bugs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM
would allow userspace to refresh the cache with a bogus GPA. The bug has
existed for quite some time, but was exposed by a new sanity check added in
6.9 (to ensure a cache is either GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left
behind during a 6.9 cleanup.
- Disable support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken and can leak host LBRs to the guest.
- Fix a bug where KVM neglects to set the enable bits for general purpose
counters in PERF_GLOBAL_CTRL when initializing the virtual PMU. Both Intel
and AMD architectures require the bits to be set at RESET in order for v2
PMUs to be backwards compatible with software that was written for v1 PMUs,
i.e. for software that will never manually set the global enables.
- Disable LBR virtualization on CPUs that don't support LBR callstacks, as
KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the
virtual LBR perf event, i.e. KVM will always fail to create LBR events on
such CPUs.
- Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that
results in an array overflow (detected by KASAN).
- Fix a flaw in the max_guest_memory selftest that results in it exhausting
the supply of ucall structures when run with more than 256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test.
- Fix a bug where KVM incorrectly thinks a TDP MMU root is an indirect shadow
root due KVM unnecessarily clobbering root_role.direct when userspace sets
guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect TDP MMU
SPTEs used for L2 if Page-Modification Logging is enabled for L1 and the L1
hypervisor is NOT using EPT (if nEPT is enabled, KVM doesn't use the TDP MMU
to run L2). For simplicity, KVM always disables PML when running L2, but
the TDP MMU wasn't accounting for root-specific conditions that force write-
protect based dirty logging.
|
|
Many architectures' switch_mm() (e.g. arm64) do not have an smp_mb()
which the core scheduler code has depended upon since commit:
commit 223baf9d17f25 ("sched: Fix performance regression introduced by mm_cid")
If switch_mm() doesn't call smp_mb(), sched_mm_cid_remote_clear() can
unset the actively used cid when it fails to observe active task after it
sets lazy_put.
There *is* a memory barrier between storing to rq->curr and _return to
userspace_ (as required by membarrier), but the rseq mm_cid has stricter
requirements: the barrier needs to be issued between store to rq->curr
and switch_mm_cid(), which happens earlier than:
- spin_unlock(),
- switch_to().
So it's fine when the architecture switch_mm() happens to have that
barrier already, but less so when the architecture only provides the
full barrier in switch_to() or spin_unlock().
It is a bug in the rseq switch_mm_cid() implementation. All architectures
that don't have memory barriers in switch_mm(), but rather have the full
barrier either in finish_lock_switch() or switch_to() have them too late
for the needs of switch_mm_cid().
Introduce a new smp_mb__after_switch_mm(), defined as smp_mb() in the
generic barrier.h header, and use it in switch_mm_cid() for scheduler
transitions where switch_mm() is expected to provide a memory barrier.
Architectures can override smp_mb__after_switch_mm() if their
switch_mm() implementation provides an implicit memory barrier.
Override it with a no-op on x86 which implicitly provide this memory
barrier by writing to CR3.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Reported-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> # for arm64
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: <stable@vger.kernel.org> # 6.4.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240415152114.59122-2-mathieu.desnoyers@efficios.com
|
|
Introduce arch_try_cmpxchg64_local() for 64-bit and 32-bit targets
to improve code using cmpxchg64_local(). On 64-bit targets, the
generated assembly improves from:
3e28: 31 c0 xor %eax,%eax
3e2a: 4d 0f b1 7d 00 cmpxchg %r15,0x0(%r13)
3e2f: 48 85 c0 test %rax,%rax
3e32: 0f 85 9f 00 00 00 jne 3ed7 <...>
to:
3e28: 31 c0 xor %eax,%eax
3e2a: 4d 0f b1 7d 00 cmpxchg %r15,0x0(%r13)
3e2f: 0f 85 9f 00 00 00 jne 3ed4 <...>
where a TEST instruction after CMPXCHG is saved. The improvements
for 32-bit targets are even more noticeable, because double-word
compare after CMPXCHG8B gets eliminated.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20240414161257.49145-1-ubizjak@gmail.com
|
|
Add lookup_address_in_pgd_attr() doing the same as the already
existing lookup_address_in_pgd(), but returning the effective settings
of the NX and RW bits of all walked page table levels, too.
This will be needed in order to match hardware behavior when looking
for effective access rights, especially for detecting writable code
pages.
In order to avoid code duplication, let lookup_address_in_pgd() call
lookup_address_in_pgd_attr() with dummy parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240412151258.9171-2-jgross@suse.com
|