summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2018-09-26ARM: dts: imx: Fix SPI bus warningsRob Herring37-95/+95
dtc has new checks for SPI buses. Fix the warnings in node names and unit-addresses. There's over 100 warnings for FSL boards, a few examples: arch/arm/boot/dts/imx28-duckbill-2-spi.dtb: Warning (spi_bus_bridge): /apb@80000000/apbh@80000000/ssp@80014000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx53-ppd.dtb: Warning (spi_bus_bridge): /soc/aips@50000000/spba@50000000/ecspi@50010000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (spi_bus_reg): /soc/aips-bus@2000000/spba-bus@2000000/spi@2014000/mcp251x@1: SPI bus unit address format error, expected "0" Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx7: Update coresight binding for hardware portsSuzuki K Poulose2-50/+46
Switch to the updated coresight bindings. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: vf610-zii-cfu1: Pass the 'no-sd' propertyFabio Estevam1-0/+1
Pass the 'no-sd' for esdhc0 controller as it is wired to eMMC. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: vf610-zii-cfu1: Pass the 'no-sdio' propertyFabio Estevam1-0/+2
No SDIO devices are connected to these ports, so pass the 'no-sdio' property. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx51-zii-scu2-mezz: Disable the internal watchdogFabio Estevam1-0/+4
imx51-zii-scu2-mezz has an external watchdog in the environment microcontroller, so disable the internal one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx51-zii-scu2-mezz: Disable VPUFabio Estevam1-0/+4
imx51-zii-scu2-mezz does not have any video encoding/decoding needs, so disable the VPU. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx51-zii-scu3-esb: Disable VPUFabio Estevam1-0/+4
imx51-zii-scu3-esb does not have any video encoding/decoding needs, so disable the VPU. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx51: Add label for VPU nodeFabio Estevam1-1/+1
Add label for VPU node so that board dts files can disable VPU if needed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-25ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating pointAnson Huang1-1/+1
Update VDD_SOC voltage to 1.25V for 900MHz operating point according to datasheet Rev. 1.3, 08/2018, 25mV is added to the minimum allowed values to cover power supply ripple. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-12ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC ProAlex Gonzalez2-0/+391
The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-12ARM: dts: imx6: RIoTboard provide standby on power off optionOleksij Rempel1-0/+5
This board, as well as some other boards with i.MX6 and a PMIC, uses a "PMIC_STBY_REQ" line to notify the PMIC about a state change. The PMIC is programmed for a specific state change before triggering the line. In this case, PMIC_STBY_REQ can be used for stand by, sleep and power off modes. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10ARM: dts: imx6q-apalis: mux RESET_MOCI# signalStefan Agner4-4/+6
The pinctrl properties on the IOMUXC node get overwritten by the carrier board level device tree, hence the pinctrl_reset_moci pinctrl does not get applied. Associate the pinctrl_reset_moci pinctrl with the PCIe node where we also make use of the pin as a reset GPIO. Since the pin is muxed as a GPIO by default not muxing it explicitly worked fine in practise. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10ARM: dts: imx6ul: Enable the PMU nodeFabio Estevam1-1/+0
There is no need to keep the PMU disabled. Enable it like it is done in the other i.MX dtsi files. With this change applied we see: [ 1.338866] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10ARM: dts: imx6qdl-sabreauto: add egalax touch screen supportAnson Huang1-0/+15
Add egalax touch screen support on i2c2 bus. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10ARM: dts: imx6qdl-sabreauto: add gpio keys supportAnson Huang1-0/+52
Add i.MX6QDL SabreAuto board's gpio keys support, there are 5 gpio keys on base board: SW3: KEY_HOME; SW4: KEY_BACK; SW5: KEY_PROGRAM; SW6: KEY_VOLUMEUP; SW7: KEY_VOLUMEDOWN; Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10ARM: dts: vf610-zii-dev-rev-c: add support for one SFF moduleRussell King1-19/+25
The board typically has 2 populated SFF interfaces. The mv88e6xxx driver currently supports SFF modules connected to ports 9 and 10 of the mv88e6390. Add support for sff2, which is connected to port 9. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10ARM: dts: vf610-zii-cfu1: Add SFF interface to switchAndrew Lunn1-0/+27
The switch has an SFF attached to port 5. Add the SFF device, the pinmux for its GPIOs, and list the port in the switch configuration. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-09ARM: dts: imx6ull: update iomux headerAnson Huang1-2/+19
Update i.MX6ULL iomux header according to latest reference manual Rev.1, 11/2017. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7s: enable cpuidle driverAnson Huang2-0/+15
Enable cpuidle for i.MX7S/D using generic ARM cpuidle driver, below 2 idle states enabled: 1. ARM WFI; 2. SoC WAIT mode. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6sx-sdb: enable gpio buttons as wakeup sourceAnson Huang1-0/+2
This patch enables i.MX6SX SDB board's below GPIO buttons as wakeup sources: SW4(FUNC1): KEY_VOLUMEUP SW5(FUNC2): KEY_VOLUMEDOWN Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7d-sdb: enable gpio buttons as wakeup sourceAnson Huang1-0/+2
This patch enables i.MX7D SDB board's below GPIO buttons as wakeup sources: S1(FUNC1): KEY_VOLUMEUP S3(FUNC2): KEY_VOLUMEDOWN Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7s-warp: use SPDX-License-IdentifierPierre-Jean Texier1-38/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: Add big-endian in nor node for ls1021aPrabhakar Kushwaha2-0/+4
NOR and IFC controller connectivity is big-endian. So add big-endian field in nor device tree node allowing IFC controller to read/write data from/to the flash correctly. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6ull-14x14-evk: correct machine model nameAnson Huang1-1/+1
i.MX6ULL is a lite version of i.MX6UL, its full name is i.MX6 UltraLiteLite, NOT UlltraLite. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6sll: add gpio clocksAnson Huang1-0/+6
i.MX6SLL has GPIO clock gates in CCM CCGR, add clock property for GPIO driver to make sure all GPIO banks work as expected. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6ul: Add weim nodeSébastien Szymanski1-0/+11
Add weim node for i.MX6UL SOC. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6ull: keep IMX6UL_ prefix for signals on both i.MX6UL and i.MX6ULLSébastien Szymanski1-5/+13
Signals available on both i.MX6UL and i.MX6ULL should have the same name because it is the case of all others common signals, it avoids to make mistakes (use the wrong ones) and it makes writing device tree files less complicated. For example: imx6ul-imx6ull-board.dtsi: ... pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 >; }; imx6ul-board.dts: #include <imx6ul.dtsi> #include <imx6ul-imx6ull-board.dtsi> ... imx6ull-board.dts: #include <imx6ull.dtsi> #include <imx6ul-imx6ull-board.dtsi> ... Without this patch, the imx6ull-board.dtb will use MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX instead of MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX and the uart5 will be misconfigured. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6qdl-wandboard: Add stdout-pathTuomas Tynkkynen1-0/+4
Setting a stdout-path in the .dtb is convenient because then the user gets a serial console on the RS-232 connector without any extra effort of figuring out the relevant 'console=' boot parameter. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7s-warp: enable i2c3 device supportPierre-Jean Texier1-0/+14
The WaRP7 has one mikroBUS socket on the back to plug click boards. This patch allows to interact with some of these i2c modules (EEPROM, RTC and so on). Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6Jacopo Mondi1-2/+2
The "EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation" is based on the 1.5 version of the i.Core MX6 cpu module. The 1.5 version differs from the original one for a few details, including the ethernet PHY interface clock provider. With this commit, the ethernet interface works properly: SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver While before using the 1.5 version, ethernet failed to startup do to un-clocked PHY interface: fec 2188000.ethernet eth0: could not attach to PHY Fixes: 3fe088357731 ("ARM: dts: imx6q: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support") Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6qdl: Add Engicam i.Core 1.5 MX6Jacopo Mondi1-0/+34
The 1.5 version of Engicam's i.Core MX6 CPU module features a different clock provider for the ethernet's PHY interface. Adjust the FEC ptp clock to reference CLK_ENET_REF clock source, and set SION bit of MX6QDL_PAD_GPIO_16__ENET_REF_CLK to adjust the input path of that pin. The newly introduced imx6ql-icore-1.5.dtsi allows to collect in a single place differences between version '1.0' and '1.5' of the module. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: ls1021a: Enable I2C DMA supportEsben Haabendal1-0/+6
Gives substantial performance improvement for transfers larger than 16 bytes (DMA_THRESHOLD). Smaller transfers are unaffected. Signed-off-by: Esben Haabendal <eha@deif.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: i.MX6: Use consistent node names for Engicam filesJagan Teki4-5/+5
Use consistent pinctrl node names for Engicam dt files, sufix 'grp' look consistent than actual node name - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6ul-isiot: Move node definitions into dtsiJagan Teki3-48/+52
Move usdhc2 and gpmi along with pinctrl nodes on imx6ul-isiot.dtsi from dts files and mark it as 'disabled' and the relevant dts will enable the status as 'okay' Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx: Switch Engicam boards to use SPDX identifierJagan Teki14-446/+16
Adopt the SPDX license identifier headers to ease license compliance management. Also added Engicam Copyright on missing files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7s: remove snvs_poweroff nodeAnson Huang1-8/+0
System poweroff is already supported by PSCI on i.MX7D, remove "snvs_poweroff" node to avoid below debug message from syscon-poweroff driver: [ 1.831414] syscon-poweroff 30370000.snvs:snvs-poweroff: pm_power_off already claimed (ptrval) psci_sys_poweroff [ 1.841707] syscon-poweroff: probe of 30370000.snvs:snvs-poweroff failed with error -16 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7s: add i.MX7 messaging unit supportOleksij Rempel1-0/+19
Define the Messaging Unit (MU) for i.MX7 in the processor's dtsi. The respective driver is added in the next commit. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx7ulp: update pinfunc header fileAnson Huang1-1/+15
The i.MX7ULP B0 chip has some pin changes for USB and VIU module, update pinfunc header file accordingly. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx51-babbage: Add MC13892 ADC supportFabio Estevam1-0/+1
The MC13892 Analog-to-Digital input pins (ADIN5-7) are exposed on the imx51-babbage board. Pass the "fsl,mc13xxx-uses-adc" property so that the MC13892 ADC block can work. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03ARM: dts: imx6sll: add gpio-ranges propertyAnson Huang1-0/+25
Add "gpio-ranges" property to establish connections between GPIOs and PINs on i.MX6SLL pinctrl driver, for details, please refer to Documentation/devicetree/bindings/gpio/gpio.txt of "gpio-ranges" property. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-01Merge tag 'omap-for-v4.19/fixes-v2-signed' of ↵Olof Johansson4-11/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap variants against v4.19-rc1 These are mostly fixes related to using ti-sysc interconnect target module driver for accessing right register offsets for sgx and cpsw and for no_console_suspend regression. There is also a droid4 emmc fix where emmc may not get detected for some models, and vibrator dts mismerge fix. And we have a file permission fix for am335x-osd3358-sm-red.dts that just got added. And we must tag RTC as system-power-controller for am437x for PMIC to shut down during poweroff. * tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-29ARM: defconfig: Update the ARM Versatile defconfigLinus Walleij1-6/+8
This updates the ARM Versatile defconfig to the latest Kconfig structural changes and adds the DUMB VGA bridge driver so that VGA works out of the box, e.g. with QEMU. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-28ARM: dts: omap4-droid4: Fix emmc errors seen on some devicesTony Lindgren1-1/+1
Otherwise we can get the following errors occasionally on some devices: mmc1: tried to HW reset card, got error -110 mmcblk1: error -110 requesting status mmcblk1: recovery failed! print_req_error: I/O error, dev mmcblk1, sector 14329 ... I have one device that hits this error almost on every boot, and another one that hits it only rarely with the other ones I've used behave without problems. I'm not sure if the issue is related to a particular eMMC card model, but in case it is, both of the machines with issues have: # cat /sys/class/mmc_host/mmc1/mmc1:0001/manfid \ /sys/class/mmc_host/mmc1/mmc1:0001/oemid \ /sys/class/mmc_host/mmc1/mmc1:0001/name 0x000045 0x0100 SEM16G and the working ones have: 0x000011 0x0100 016G92 Note that "ti,non-removable" is different as omap_hsmmc_reg_get() does not call omap_hsmmc_disable_boot_regulators() if no_regulator_off_init is set. And currently we set no_regulator_off_init only for "ti,non-removable" and not for "non-removable". It seems that we should have "non-removable" with some other mmc generic property behave in the same way instead of having to use a non-generic property. But let's fix the issue first. Fixes: 7e2f8c0ae670 ("ARM: dts: Add minimal support for motorola droid 4 xt894") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-28Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2Tony Lindgren578-10806/+19248
2018-08-28ARM: dts: Fix file permission for am335x-osd3358-sm-red.dtsNeeraj Dantu1-0/+0
Fix wrong mode for dts file added by commit bb3e3fbbac86 ("ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x"). Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com> CC: Robert Nelson <robertcnelson@gmail.com> CC: Jason Kridner <jkridner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-08-27ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1GFabio Estevam1-0/+1
imx6sl-evk, imx6sll-evk and imx6sx-sdb boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1GFabio Estevam1-0/+1
imx23-evk and imx28-evk boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: dts: imx23-evk: Convert to the new display bindingsFabio Estevam1-24/+24
imx23-evk board has a Seiko 43WVF1G parallel display. Instead of hardcoding the display timings in the device tree, use the "sii,43wvf1g" compatible instead. This aligns with the new mxsfb bindings scheme documented at: Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: dts: imx23-evk: Move regulators outside simple-busFabio Estevam1-25/+17
It is recommended to place regulators outside simple-bus, so move them accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27ARM: dts: imx28-evk: Convert to the new display bindingsFabio Estevam1-24/+24
imx28-evk board has a Seiko 43WVF1G parallel display. Instead of hardcoding the display timings in the device tree, use the "sii,43wvf1g" compatible instead. This aligns with the new mxsfb bindings scheme documented at: Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-19 19:51:45 +0000