summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/stm32746g-eval.dts
AgeCommit message (Collapse)AuthorFilesLines
2019-10-25ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boardsAlexandre Torgue1-1/+0
"#size-cells" entry is not needed for "gpio-keys" driver. Indeed "reg" entry is not used. This commit will fix a warnings seen by DT validation tool. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: fix memory nodes to match with DT validation toolAlexandre Torgue1-1/+1
DT validation ("make dtbs_check") has shown that some memory nodes were not correctly written. This commit fixes this kind of issue: "stm32f746-disco.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[3221225472, 8388608]]}" Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-05-21ARM: dts: stm32: add orange and blue leds on stm32746g-evalAmelie Delaunay1-0/+6
Orange (LD2) and blue (LD4) leds on stm32746g-eval are connected on STMFX gpio expander, offset 17 and 19. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-05-21ARM: dts: stm32: add joystick support on stm32746g-evalAmelie Delaunay1-0/+43
The joystick (B3) on stm32746g-eval uses gpios on STMFX gpio expander. These gpios need a pin configuration (push-pull and bias-pull-up), described under stmfx_pinctrl node. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-05-21ARM: dts: stm32: add STMFX support on stm32746g-evalAmelie Delaunay1-0/+17
This patch adds support for STMicroelectronics Multi-Function eXpander (STMFX) on stm32746g-eval. It is connected on i2c1. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-01-30ARM: dts: Kill off skeleton{64}.dtsiRob Herring1-0/+1
Remove the usage of skeleton.dtsi in the remaining dts files. It was deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"). This will make adding a unit-address to memory nodes easier. The main tricky part to removing skeleton.dtsi is we could end up with no /memory node at all when a bootloader depends on one being present. I hacked up dtc to check for this condition. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-05ARM: dts: stm32: Enable sdio1 for stm32f746-evalPatrice Chotard1-0/+17
Adds SDIO related DT nodes for stm32f746-eval board. broken-cd property is needed as card detect signal is connected to a GPIO expander which is not yet supported in kernel linux. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-02-27ARM: dts: stm32: select otg mode for usbotg_hs on stm32746g_evalAmelie Delaunay1-1/+1
Configure USB OTG HS in OTG (DRD) mode on STM32746G_eval. The USB connector used will determine the role of USB OTG controller. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-02-16ARM: dts: stm32: use dedicated files for pinctrl on stm32f7 familyAlexandre Torgue1-0/+1
Currently, same stm32f746-pinctrl driver is used for stm32f746 and stm32f769 MCU. As pin map is different between those 2 MCUs, a stm32f769-pinctrl driver has been recently added. This patch -allows to use stm32f769-pinctrl driver for stm32f769 boards -reworks stm32 devicetree files to fit with stm32f746 / stm32f769 Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-16ARM: dts: stm32: Enable USB HS on stm32746g-evalAmelie Delaunay1-0/+16
This patch enables USB HS on stm32746g-eval (Host mode). Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-16ARM: dts: stm32: Add I2C1 support for STM32F746 eval boardPierre-Yves MORDRET1-0/+8
This patch adds I2C1 support for STM32F746 eval board Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-05-09Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. Major new platforms: - Gemini has been ported to DT, so a handful of "new" platforms moved over from board files - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK - A bunch of embedded platforms, several Linksys platforms, Synology DS116, - Motorola Droid4 (really old OMAP-based phone) support is added. Some refactorings, i.e. Allwinner H3/H5 support is commonalized. And lots of smaller changes, cleanups, etc. See shortlog for more description We're adding ability to cross-include DT files between arm and arm64, by creating appropriate links in the dt-include directory, and using arm/ and arm64/ as include prefixes. This will avoid other local hacks such as per-file links between the two arch trees (this broke for external mirroring of DT contents). Now they can just provide their own appropriate dt-include hierarcy per platform" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits) ARM: dts: exynos: Use - instead of @ for DT OPP entries arm: spear6xx: add DT description of the ADC on SPEAr600 arm: spear6xx: remove unneeded pinctrl properties in spear600-evb arm: spear6xx: switch spear600-evb to the new flash partition DT binding arm: spear6xx: fix spaces in spear600-evb.dts arm: spear6xx: use node labels in spear600-evb.dts arm: spear6xx: add labels to various nodes in spear600.dtsi ARM: dts: vexpress: fix few unit address format warnings ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: armada-38x: label USB and SATA nodes ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ...
2017-04-05ARM: dts: stm32: enable CRC on stm32746g-eval boardFabien DESSENNE1-0/+4
Enable the CRC (CRC32 crypto) on stm32746g-eval board Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-23ARM: dts: stm32: enable RTC on stm32746g-evalAmelie Delaunay1-0/+4
This patch enables RTC on stm32746g-eval with default LSE clock source. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-15ARM: dts: Add STM32F746 MCU and STM32746g-EVAL boardAlexandre TORGUE1-0/+96
The STMicrolectornics's STM32F746 MCU has the following main features: - Cortex-M7 core running up to @216MHz - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM) - FMC controller to connect SDRAM, NOR and NAND memories - Dual mode QSPI - SD/MMC/SDIO support - Ethernet controller - USB OTFG FS & HS controllers - I2C, SPI, CAN busses support - Several 16 & 32 bits general purpose timers - Serial Audio interface - LCD controller - HDMI-CEC - SPDIFRX Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>