summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2014-10-19Merge tag 'arm-soc-fixes-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A batch of fixes that have come in during the merge window. Some of them are defconfig updates for things that have now landed, some errata additions and a few general scattered fixes. There's also a qcom DT update that adds support for SATA on AP148, and basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed isolated enough that we could merge it even if it's late" * tag 'arm-soc-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: corrected bcm2835 search ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa ARM: dts: Explicitly set dr_mode on exynos Peach boards ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148 MAINTAINERS: Update Santosh Shilimkar's email id ARM: sunxi_defconfig: enable CONFIG_REGULATOR ARM: dts: Disable smc91x on n900 until bootloader dependency is removed ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 ARM: exynos_defconfig: enable USB gadget support ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 ARM: exynos_defconfig: Enable SBS battery support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable MAX77802
2014-10-19Merge tag 'qcom-dt-for-3.18-3' of ↵Olof Johansson1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes Merge "qcom DT changes for v3.18-3" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18-3 * Added Board support for CM-QS600 and Sony Xperia Z1 phone * Added SATA support on IPQ8064/AP148 * tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: dts: qcom: add CM-QS600 board ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone ARM: dts: qcom: Add SATA support on IPQ8064/AP148
2014-10-19Merge branch 'i2c/for-next' of ↵Linus Torvalds4-0/+57
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Highlights from the I2C subsystem for 3.18: - new drivers for Axxia AM55xx, and Hisilicon hix5hd2 SoC. - designware driver gained AMD support, exynos gained exynos7 support The rest is usual driver stuff. Hopefully no lowlights this time" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Add Device IDs for Intel Sunrise Point PCH i2c: hix5hd2: add i2c controller driver i2c-imx: Disable the clock on probe failure i2c: designware: Add support for AMD I2C controller i2c: designware: Rework probe() to get clock a bit later i2c: designware: Default to fast mode in case of ACPI i2c: axxia: Add I2C driver for AXM55xx i2c: exynos: add support for HSI2C module on Exynos7 i2c: mxs: detect No Slave Ack on SELECT in PIO mode i2c: cros_ec: Remove EC_I2C_FLAG_10BIT i2c: cros-ec-tunnel: Add of match table i2c: rcar: remove sign-compare flaw i2c: ismt: Use minimum descriptor size i2c: imx: Add arbitration lost check i2c: rk3x: Remove unlikely() annotations i2c: rcar: check for no IRQ in rcar_i2c_irq() i2c: rcar: make rcar_i2c_prepare_msg() *void* i2c: rcar: simplify check for last message i2c: designware: add support of platform data to set I2C mode i2c: designware: add support of I2C standard mode
2014-10-19Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
2014-10-19Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-562/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Ingo Molnar: "A second (and last) round of late coming fixes and changes, almost all of them in perf tooling: User visible tooling changes: - Add period data column and make it default in 'perf script' (Jiri Olsa) - Add a visual cue for toggle zeroing of samples in 'perf top' (Taeung Song) - Improve callchains when using libunwind (Namhyung Kim) Tooling fixes and infrastructure changes: - Fix for double free in 'perf stat' when using some specific invalid command line combo (Yasser Shalabi) - Fix off-by-one bugs in map->end handling (Stephane Eranian) - Fix off-by-one bug in maps__find(), also related to map->end handling (Namhyung Kim) - Make struct symbol->end be the first addr after the symbol range, to make it match the convention used for struct map->end. (Arnaldo Carvalho de Melo) - Fix perf_evlist__add_pollfd() error handling in 'perf kvm stat live' (Jiri Olsa) - Fix python test build by moving callchain_param to an object linked into the python binding (Jiri Olsa) - Document sysfs events/ interfaces (Cody P Schafer) - Fix typos in perf/Documentation (Masanari Iida) - Add missing 'struct option' forward declaration (Arnaldo Carvalho de Melo) - Add option to copy events when queuing for sorting across cpu buffers and enable it for 'perf kvm stat live', to avoid having events left in the queue pointing to the ring buffer be rewritten in high volume sessions. (Alexander Yarygin, improving work done by David Ahern): - Do not include a struct hists per perf_evsel, untangling the histogram code from perf_evsel, to pave the way for exporting a minimalistic tools/lib/api/perf/ library usable by tools/perf and initially by the rasd daemon being developed by Borislav Petkov, Robert Richter and Jean Pihet. (Arnaldo Carvalho de Melo) - Make perf_evlist__open(evlist, NULL, NULL), i.e. without cpu and thread maps mean syswide monitoring, reducing the boilerplate for tools that only want system wide mode. (Arnaldo Carvalho de Melo) - Move exit stuff from perf_evsel__delete to perf_evsel__exit, delete should be just a front end for exit + free (Arnaldo Carvalho de Melo) - Add support to new style format of kernel PMU event. (Kan Liang) and other misc fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) perf script: Add period as a default output column perf script: Add period data column perf evsel: No need to drag util/cgroup.h perf evlist: Add missing 'struct option' forward declaration perf evsel: Move exit stuff from __delete to __exit kprobes/x86: Remove stale ARCH_SUPPORTS_KPROBES_ON_FTRACE define perf kvm stat live: Enable events copying perf session: Add option to copy events when queueing perf Documentation: Fix typos in perf/Documentation perf trace: Use thread_{,_set}_priv helpers perf kvm: Use thread_{,_set}_priv helpers perf callchain: Create an address space per thread perf report: Set callchain_param.record_mode for future use perf evlist: Fix for double free in tools/perf stat perf test: Add test case for pmu event new style format perf tools: Add support to new style format of kernel PMU event perf tools: Parse the pmu event prefix and suffix Revert "perf tools: Default to cpu// for events v5" perf Documentation: Remove Ruplicated docs for powerpc cpu specific events perf Documentation: sysfs events/ interfaces ...
2014-10-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-2/+129
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-18Merge tag 'fbdev-3.18' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - new 6x10 font - various small fixes and cleanups * tag 'fbdev-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (30 commits) fonts: Add 6x10 font videomode: provide dummy inline functions for !CONFIG_OF video/atmel_lcdfb: Introduce regulator support fbdev: sh_mobile_hdmi: Re-init regs before irq re-enable on resume framebuffer: fix screen corruption when copying framebuffer: fix border color arm, fbdev, omap2, LLVMLinux: Remove nested function from omapfb arm, fbdev, omap2, LLVMLinux: Remove nested function from omap2 dss video: fbdev: valkyriefb.c: use container_of to resolve fb_info_valkyrie from fb_info video: fbdev: pxafb.c: use container_of to resolve pxafb_info/layer from fb_info video: fbdev: cyber2000fb.c: use container_of to resolve cfb_info from fb_info video: fbdev: controlfb.c: use container_of to resolve fb_info_control from fb_info video: fbdev: sa1100fb.c: use container_of to resolve sa1100fb_info from fb_info video: fbdev: stifb.c: use container_of to resolve stifb_info from fb_info video: fbdev: sis: sis_main.c: Cleaning up missing null-terminate in conjunction with strncpy video: valkyriefb: Fix unused variable warning in set_valkyrie_clock() video: fbdev: use %*ph specifier to dump small buffers video: mx3fb: always enable BACKLIGHT_LCD_SUPPORT video: fbdev: au1200fb: delete double assignment video: fbdev: sis: delete double assignment ...
2014-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfsLinus Torvalds1-268/+0
Pull NTFS update from Anton Altaparmakov: "Here is a small NTFS update notably implementing FIBMAP ioctl for NTFS by adding the bmap address space operation. People seem to still want FIBMAP" * git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs: NTFS: Bump version to 2.1.31. NTFS: Add bmap address space operation needed for FIBMAP ioctl. NTFS: Remove changelog from Documentation/filesystems/ntfs.txt. NTFS: Split ntfs_aops into ntfs_normal_aops and ntfs_compressed_aops in preparation for them diverging.
2014-10-18Merge branch 'for-3.18/core' of git://git.kernel.dk/linux-blockLinus Torvalds2-49/+13
Pull core block layer changes from Jens Axboe: "This is the core block IO pull request for 3.18. Apart from the new and improved flush machinery for blk-mq, this is all mostly bug fixes and cleanups. - blk-mq timeout updates and fixes from Christoph. - Removal of REQ_END, also from Christoph. We pass it through the ->queue_rq() hook for blk-mq instead, freeing up one of the request bits. The space was overly tight on 32-bit, so Martin also killed REQ_KERNEL since it's no longer used. - blk integrity updates and fixes from Martin and Gu Zheng. - Update to the flush machinery for blk-mq from Ming Lei. Now we have a per hardware context flush request, which both cleans up the code should scale better for flush intensive workloads on blk-mq. - Improve the error printing, from Rob Elliott. - Backing device improvements and cleanups from Tejun. - Fixup of a misplaced rq_complete() tracepoint from Hannes. - Make blk_get_request() return error pointers, fixing up issues where we NULL deref when a device goes bad or missing. From Joe Lawrence. - Prep work for drastically reducing the memory consumption of dm devices from Junichi Nomura. This allows creating clone bio sets without preallocating a lot of memory. - Fix a blk-mq hang on certain combinations of queue depths and hardware queues from me. - Limit memory consumption for blk-mq devices for crash dump scenarios and drivers that use crazy high depths (certain SCSI shared tag setups). We now just use a single queue and limited depth for that" * 'for-3.18/core' of git://git.kernel.dk/linux-block: (58 commits) block: Remove REQ_KERNEL blk-mq: allocate cpumask on the home node bio-integrity: remove the needless fail handle of bip_slab creating block: include func name in __get_request prints block: make blk_update_request print prefix match ratelimited prefix blk-merge: don't compute bi_phys_segments from bi_vcnt for cloned bio block: fix alignment_offset math that assumes io_min is a power-of-2 blk-mq: Make bt_clear_tag() easier to read blk-mq: fix potential hang if rolling wakeup depth is too high block: add bioset_create_nobvec() block: use bio_clone_fast() in blk_rq_prep_clone() block: misplaced rq_complete tracepoint sd: Honor block layer integrity handling flags block: Replace strnicmp with strncasecmp block: Add T10 Protection Information functions block: Don't merge requests if integrity flags differ block: Integrity checksum flag block: Relocate bio integrity flags block: Add a disk flag to block integrity profile block: Add prefix to block integrity profile flags ...
2014-10-18Merge tag 'for-linus-20141015' of git://git.infradead.org/linux-mtdLinus Torvalds2-2/+4
Pull MTD update from Brian Norris: "Sorry for delaying this a bit later than usual. There's one mild regression from 3.16 that was noticed during the 3.17 cycle, and I meant to send a fix for it along with this pull request. I'll probably try to queue it up for a later pull request once I've had a better look at it, hopefully by -rc2 at the latest. Summary for this pull: NAND - Cleanup for Denali driver - Atmel: add support for new page sizes - Atmel: fix up 'raw' mode support - Atmel: miscellaneous cleanups - New timing mode helpers for non-ONFI NAND - OMAP: allow driver to be (properly) built as a module - bcm47xx: RESET support and other cleanups SPI NOR - Miscellaneous cleanups, to prepare framework for wider use (some further work still pending) - Compile-time configuration to select 4K vs. 64K support for flash that support both (necessary for using UBIFS on some SPI NOR) A few scattered code quality fixes, detected by Coverity See the changesets for more" * tag 'for-linus-20141015' of git://git.infradead.org/linux-mtd: (59 commits) mtd: nand: omap: Correct CONFIG_MTD_NAND_OMAP_BCH help message mtd: nand: Force omap_elm to be built as a module if omap2_nand is a module mtd: move support for struct flash_platform_data into m25p80 mtd: spi-nor: add Kconfig option to disable 4K sectors mtd: nand: Move ELM driver and rename as omap_elm nand: omap2: Replace pr_err with dev_err nand: omap2: Remove horrible ifdefs to fix module probe mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids table mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDs mtd: physmap_of: Add non-obsolete map_rom probe mtd: physmap_of: Fix ROM support via OF MAINTAINERS: add l2-mtd.git, 'next' tree for MTD mtd: denali: fix indents and other trivial things mtd: denali: remove unnecessary parentheses mtd: denali: remove another set-but-unused variable mtd: denali: fix include guard and license block of denali.h mtd: nand: don't break long print messages mtd: bcm47xxnflash: replace some magic numbers mtd: bcm47xxnflash: NAND_CMD_RESET support mtd: bcm47xxnflash: add cmd_ctrl handler ...
2014-10-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-42/+49
Pull networking fixes from David Miller: 1) Include fixes for netrom and dsa (Fabian Frederick and Florian Fainelli) 2) Fix FIXED_PHY support in stmmac, from Giuseppe CAVALLARO. 3) Several SKB use after free fixes (vxlan, openvswitch, vxlan, ip_tunnel, fou), from Li ROngQing. 4) fec driver PTP support fixes from Luwei Zhou and Nimrod Andy. 5) Use after free in virtio_net, from Michael S Tsirkin. 6) Fix flow mask handling for megaflows in openvswitch, from Pravin B Shelar. 7) ISDN gigaset and capi bug fixes from Tilman Schmidt. 8) Fix route leak in ip_send_unicast_reply(), from Vasily Averin. 9) Fix two eBPF JIT bugs on x86, from Alexei Starovoitov. 10) TCP_SKB_CB() reorganization caused a few regressions, fixed by Cong Wang and Eric Dumazet. 11) Don't overwrite end of SKB when parsing malformed sctp ASCONF chunks, from Daniel Borkmann. 12) Don't call sock_kfree_s() with NULL pointers, this function also has the side effect of adjusting the socket memory usage. From Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) bna: fix skb->truesize underestimation net: dsa: add includes for ethtool and phy_fixed definitions openvswitch: Set flow-key members. netrom: use linux/uaccess.h dsa: Fix conversion from host device to mii bus tipc: fix bug in bundled buffer reception ipv6: introduce tcp_v6_iif() sfc: add support for skb->xmit_more r8152: return -EBUSY for runtime suspend ipv4: fix a potential use after free in fou.c ipv4: fix a potential use after free in ip_tunnel_core.c hyperv: Add handling of IP header with option field in netvsc_set_hash() openvswitch: Create right mask with disabled megaflows vxlan: fix a free after use openvswitch: fix a use after free ipv4: dst_entry leak in ip_send_unicast_reply() ipv4: clean up cookie_v4_check() ipv4: share tcp_v4_save_options() with cookie_v4_check() ipv4: call __ip_options_echo() in cookie_v4_check() atm: simplify lanai.c by using module_pci_driver ...
2014-10-16NTFS: Remove changelog from Documentation/filesystems/ntfs.txt.Anton Altaparmakov1-268/+0
Changelog is in git history, no need to have a copy in the documentation. Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
2014-10-16ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phoneTim Bird1-0/+1
This DTS has support for the Sony Xperia Z1 phone (codenamed Honami). This first version of the DTS supports just a serial console. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-10-16i2c: i801: Add Device IDs for Intel Sunrise Point PCHjames.d.ralston@intel.com1-0/+1
This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-16i2c: hix5hd2: add i2c controller driverWei Yan1-0/+24
I2C drivers for hix5hd2 soc series, including following chipset Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100. Signed-off-by: Wei Yan <sledge.yanwei@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> [wsa: folded dt docs into this patch] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15perf Documentation: Remove Ruplicated docs for powerpc cpu specific eventsCody P Schafer1-573/+0
Listing specific events doesn't actually help us at all here because: - these events actually vary between different ppc processors, they aren't garunteed to be present. - the documentation of the (generic) file contents is now superceded by the docs for arbitrary event file contents. Signed-off-by: Cody P Schafer <dev@codyps.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1412143402-26061-5-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-15perf Documentation: sysfs events/ interfacesCody P Schafer1-0/+60
Add documentation for the <event>, <event>.scale, and <event>.unit files in sysfs. <event>.scale and <event>.unit were undocumented. <event> was previously documented only for specific powerpc pmu events. Signed-off-by: Cody P Schafer <dev@codyps.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Cody P Schafer <dev@codyps.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Haren Myneni <hbabu@us.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <michaele@au1.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1412143402-26061-4-git-send-email-sukadev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-15Merge tag 'iommu-updates-v3.18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This pull-request includes: - change in the IOMMU-API to convert the former iommu_domain_capable function to just iommu_capable - various fixes in handling RMRR ranges for the VT-d driver (one fix requires a device driver core change which was acked by Greg KH) - the AMD IOMMU driver now assigns and deassigns complete alias groups to fix issues with devices using the wrong PCI request-id - MMU-401 support for the ARM SMMU driver - multi-master IOMMU group support for the ARM SMMU driver - various other small fixes all over the place" * tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/vt-d: Work around broken RMRR firmware entries iommu/vt-d: Store bus information in RMRR PCI device path iommu/vt-d: Only remove domain when device is removed driver core: Add BUS_NOTIFY_REMOVED_DEVICE event iommu/amd: Fix devid mapping for ivrs_ioapic override iommu/irq_remapping: Fix the regression of hpet irq remapping iommu: Fix bus notifier breakage iommu/amd: Split init_iommu_group() from iommu_init_device() iommu: Rework iommu_group_get_for_pci_dev() iommu: Make of_device_id array const amd_iommu: do not dereference a NULL pointer address. iommu/omap: Remove omap_iommu unused owner field iommu: Remove iommu_domain_has_cap() API function IB/usnic: Convert to use new iommu_capable() API function vfio: Convert to use new iommu_capable() API function kvm: iommu: Convert to use new iommu_capable() API function iommu/tegra: Convert to iommu_capable() API function iommu/msm: Convert to iommu_capable() API function iommu/vt-d: Convert to iommu_capable() API function iommu/fsl: Convert to iommu_capable() API function ...
2014-10-15Merge tag 'clk-for-linus-3.18' of ↵Linus Torvalds9-10/+117
git://git.linaro.org/people/mike.turquette/linux Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...
2014-10-15Merge tag 'mfd-for-linus-3.18' of ↵Linus Torvalds10-2/+373
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...
2014-10-15Merge tag 'for-v3.18' of git://git.infradead.org/battery-2.6Linus Torvalds8-1/+281
Pull power supply and reset updates from Sebastian Reichel: - Initial support for the following chips * max77836 (charger) * max14577 (charger) * bq27742 (battery gauge) * ltc2952 (poweroff) * stih416 (restart) * syscon-reboot (restart) * gpio-restart (restart) - cleanup of power supply core - misc fixes in power supply and reset drivers * tag 'for-v3.18' of git://git.infradead.org/battery-2.6: (48 commits) power: ab8500_fg: Fix build warning Documentation: charger: max14577: Update the date of introducing ABI power: reset: corrections for simple syscon reboot driver Documentation: power: reset: Add documentation for generic SYSCON reboot driver power: reset: Add generic SYSCON register mapped reset bq27x00_battery: Fix flag reading for bq27742 power: reset: use restart_notifier mechanism for msm-poweroff power: Add simple gpio-restart driver power: reset: st: Provide DT bindings for ST's Power Reset driver power: reset: Add restart functionality for STiH41x platforms power: charger-manager: Fix NULL pointer exception with missing cm-fuel-gauge power: max14577: Fix circular config SYSFS dependency power: gpio-charger: do not use gpio value directly power: max8925: Use of_get_child_by_name power: max8925: Fix NULL ptr dereference on memory allocation failure bq27x00_battery: Add support to bq27742 Documentation: charger: max14577: Document exported sysfs entry devicetree: mfd: max14577: Add device tree bindings document power: max17040: Add ID for MAX77836 Fuel Gauge block charger: max14577: Configure battery-dependent settings from DTS and sysfs ... Conflicts: drivers/power/reset/Kconfig drivers/power/reset/Makefile
2014-10-14stmmac: dwmac-sti: review the glue-logic for STi4xx and STiD127 SoCsGiuseppe CAVALLARO1-41/+48
This patch is to review the whole glue logic adopted on STi SoCs that was bugged. In the old glue-logic there was a lot of confusion when setup the retiming especially for STiD127 where, for example, the bits 6 and 7 (in the GMAC control register) have a different meaning of what is used for STiH4xx SoCs. So we cannot adopt the same glue for all these SoCs. Moreover, GiGa on STiD127 didn't work and, for all the SoCs, the RGMII couldn't run when the speed was 10Mbps (because the clock was not properly managed). Note that the phy clock needs to be provided by the platform as well as documented in the related binding file (updated as consequence). The old code supported too many configurations never adopted and validated. This made the code very complex to maintain and debug in case of issues. The patch simplifies all the configurations as commented in the tables inside the file and obviously it has been tested on all the boards based on the SoCs mentioned. With this patch, the dwmac-sti is also ready to support new configurations that will be available on next SoC generations. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14stmmac: make the STi Layer compatible to STiH407Giuseppe CAVALLARO1-2/+2
This adds the missing compatibility to the STiH407 SoC. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-14Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds10-2/+252
Pull drm updates from Dave Airlie: "This is the main git pull for the drm, I pretty much froze major pulls at -rc5/6 time, and haven't had much fallout, so will probably continue doing that. Lots of changes all over, big internal header cleanup to make it clear drm features are legacy things and what are things that modern KMS drivers should be using. Also big move to use the new generic fences in all the TTM drivers. core: atomic prep work, vblank rework changes, allows immediate vblank disables major header reworking and cleanups to better delinate legacy interfaces from what KMS drivers should be using. cursor planes locking fixes ttm: move to generic fences (affects all TTM drivers) ppc64 caching fixes radeon: userptr support, uvd for old asics, reset rework for fence changes better buffer placement changes, dpm feature enablement hdmi audio support fixes intel: Cherryview work, 180 degree rotation, skylake prep work, execlist command submission full ppgtt prep work cursor improvements edid caching, vdd handling improvements nouveau: fence reworking kepler memory clock work gt21x clock work fan control improvements hdmi infoframe fixes DP audio ast: ppc64 fixes caching fix rcar: rcar-du DT support ipuv3: prep work for capture support msm: LVDS support for mdp4, new panel, gpu refactoring exynos: exynos3250 SoC support, drop bad mmap interface, mipi dsi changes, and component match support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits) drm/mst: rework payload table allocation to conform better. drm/ast: Fix HW cursor image drm/radeon/kv: add uvd/vce info to dpm debugfs output drm/radeon/ci: add uvd/vce info to dpm debugfs output drm/radeon: export reservation_object from dmabuf to ttm drm/radeon: cope with foreign fences inside the reservation object drm/radeon: cope with foreign fences inside display drm/core: use helper to check driver features drm/radeon/cik: write gfx ucode version to ucode addr reg drm/radeon/si: print full CS when we hit a packet 0 drm/radeon: remove unecessary includes drm/radeon/combios: declare legacy_connector_convert as static drm/radeon/atombios: declare connector convert tables as static drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table drm/radeon/dpm: drop clk/voltage dependency filters for BTC drm/radeon/dpm: drop clk/voltage dependency filters for CI drm/radeon/dpm: drop clk/voltage dependency filters for SI drm/radeon/dpm: drop clk/voltage dependency filters for NI drm/radeon: disable audio when we disable hdmi (v2) drm/radeon: split audio enable between eg and r600 (v2) ...
2014-10-14Merge branch 'misc' of ↵Linus Torvalds1-59/+35
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild updates from Michal Marek: "This is the less critical kbuild stuff for v3.18-rc1: - make deb-pkg debuginfo fix, ppc64el support and warning fix for recent dpkg tools - make TAGS fixes - new coccinelle patch - kbuild documentation improvements" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: deb-pkg: remove obsolete -isp option to dpkg-gencontrol coccinelle: misc: semantic patch to delete overly complex return code processing deb-pkg: Add support for powerpc little endian builddeb: put the dbg files into the correct directory scripts/tags.sh: fix DEFINE_HASHTABLE in emacs case scripts/tags.sh: remove *PCGFLAGS regular expressions scripts/tags.sh: Don't specify kind-spec for emacs' ctags/etags Documentation: kbuild: Improve grammar Documentation: kbuild: Remove obsolete dtc_cpp section Documentation: kbuild: Improve if_changed documentation Documentation: kbuild: Remove obsolete include/asm symlink step
2014-10-14Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds8-22/+622
Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...
2014-10-14Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "This patch set contains the main portion of the changes for 3.18 in regard to the s390 architecture. It is a bit bigger than usual, mainly because of a new driver and the vector extension patches. The interesting bits are: - Quite a bit of work on the tracing front. Uprobes is enabled and the ftrace code is reworked to get some of the lost performance back if CONFIG_FTRACE is enabled. - To improve boot time with CONFIG_DEBIG_PAGEALLOC, support for the IPTE range facility is added. - The rwlock code is re-factored to improve writer fairness and to be able to use the interlocked-access instructions. - The kernel part for the support of the vector extension is added. - The device driver to access the CD/DVD on the HMC is added, this will hopefully come in handy to improve the installation process. - Add support for control-unit initiated reconfiguration. - The crypto device driver is enhanced to enable the additional AP domains and to allow the new crypto hardware to be used. - Bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390/ftrace: simplify enabling/disabling of ftrace_graph_caller s390/ftrace: remove 31 bit ftrace support s390/kdump: add support for vector extension s390/disassembler: add vector instructions s390: add support for vector extension s390/zcrypt: Toleration of new crypto hardware s390/idle: consolidate idle functions and definitions s390/nohz: use a per-cpu flag for arch_needs_cpu s390/vtime: do not reset idle data on CPU hotplug s390/dasd: add support for control unit initiated reconfiguration s390/dasd: fix infinite loop during format s390/mm: make use of ipte range facility s390/setup: correct 4-level kernel page table detection s390/topology: call set_sched_topology early s390/uprobes: architecture backend for uprobes s390/uprobes: common library for kprobes and uprobes s390/rwlock: use the interlocked-access facility 1 instructions s390/rwlock: improve writer fairness s390/rwlock: remove interrupt-enabling rwlock variant. s390/mm: remove change bit override support ...
2014-10-14Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "This tree includes the following changes: - fix memory hotplug - fix hibernation bootup memory layout assumptions - fix hyperv numa guest kernel messages - remove dead code - update documentation" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Update memory map description to list hypervisor-reserved area x86/mm, hibernate: Do not assume the first e820 area to be RAM x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data() x86/mm/hotplug: Modify PGD entry when removing memory x86/mm/hotplug: Pass sync_global_pgds() a correct argument in remove_pagetable() x86: Remove set_pmd_pfn
2014-10-14lib/vsprintf: add %*pE[achnops] format specifierAndy Shevchenko1-0/+32
This allows user to print a given buffer as an escaped string. The rules are applied according to an optional mix of flags provided by additional format letters. For example, if the given buffer is: 1b 62 20 5c 43 07 22 90 0d 5d The result strings would be: %*pE "\eb \C\a"\220\r]" %*pEhp "\x1bb \C\x07"\x90\x0d]" %*pEa "\e\142\040\\\103\a\042\220\r\135" Please, read Documentation/printk-formats.txt and lib/string_helpers.c kernel documentation to get further information. [akpm@linux-foundation.org: tidy up comment layout, per Joe] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Joe Perches <joe@perches.com> Cc: "John W . Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14coredump: add %i/%I in core_pattern to report the tid of the crashed threadOleg Nesterov1-0/+2
format_corename() can only pass the leader's pid to the core handler, but there is no simple way to figure out which thread originated the coredump. As Jan explains, this also means that there is no simple way to create the backtrace of the crashed process: As programs are mostly compiled with implicit gcc -fomit-frame-pointer one needs program's .eh_frame section (equivalently PT_GNU_EH_FRAME segment) or .debug_frame section. .debug_frame usually is present only in separate debug info files usually not even installed on the system. While .eh_frame is a part of the executable/library (and it is even always mapped for C++ exceptions unwinding) it no longer has to be present anywhere on the disk as the program could be upgraded in the meantime and the running instance has its executable file already unlinked from disk. One possibility is to echo 0x3f >/proc/*/coredump_filter and dump all the file-backed memory including the executable's .eh_frame section. But that can create huge core files, for example even due to mmapped data files. Other possibility would be to read .eh_frame from /proc/PID/mem at the core_pattern handler time of the core dump. For the backtrace one needs to read the register state first which can be done from core_pattern handler: ptrace(PTRACE_SEIZE, tid, 0, PTRACE_O_TRACEEXIT) close(0); // close pipe fd to resume the sleeping dumper waitpid(); // should report EXIT PTRACE_GETREGS or other requests The remaining problem is how to get the 'tid' value of the crashed thread. It could be read from the first NT_PRSTATUS note of the core file but that makes the core_pattern handler complicated. Unfortunately %t is already used so this patch uses %i/%I. Automatic Bug Reporting Tool (https://github.com/abrt/abrt/wiki/overview) is experimenting with this. It is using the elfutils (https://fedorahosted.org/elfutils/) unwinder for generating the backtraces. Apart from not needing matching executables as mentioned above, another advantage is that we can get the backtrace without saving the core (which might be quite large) to disk. [mmilata@redhat.com: final paragraph of changelog] Signed-off-by: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Mark Wielaard <mjw@redhat.com> Cc: Martin Milata <mmilata@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: bq32000: add trickle charger device tree bindingPavel Machek1-0/+18
BQ32000 have "trickle chargers". Introduce a device tree binding for specifying the trickle charger configuration for that. Signed-off-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jason Cooper <jason@lakedameon.net> Cc: Matti Vaittinen <matti.vaittinen@nsn.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14Documentation: dt-bindings: trickle charger dt binding document for ds1339Matti Vaittinen2-1/+18
Some DS13XX devices have "trickle chargers". Introduce a device tree binding for the resistor and diode configuration for enabling trickle charger. Signed-off-by: Matti Vaittinen <matti.vaittinen@nsn.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Machek <pavel@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: s3c: add support for RTC of Exynos3250 SoCChanwoo Choi1-0/+1
Add support for RTC of Exynos3250 SoC. The Exynos3250 needs source clock(32.768KHz) for RTC block. If source clock of RTC is registerd on clock list of common clk framework, Exynos RTC drvier have to control this clock. Clock list for s3c-rtc device: - rtc : CLK_RTC of CLK_GATE_IP_PERIR is gate clock for RTC. - rtc_src : XrtcXTI is 32.768.kHz source clock for RTC. (XRTCXTI: Specifies a clock from 32.768 kHz crystal pad with XRTCXTI and XRTCXTO pins. RTC uses this clock as the source of a real-time clock.) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14rtc: s3c: remove warning message when checking coding style with checkpatch ↵Chanwoo Choi1-0/+2
script Remove warning message when checking codeing style with checkpatch script and reduce un-necessary i2c read operation on s3c_rtc_enable. WARNING: line over 80 characters #406: FILE: drivers/rtc/rtc-s3c.c:406: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0) { WARNING: line over 80 characters #414: FILE: drivers/rtc/rtc-s3c.c:414: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)) { WARNING: line over 80 characters #422: FILE: drivers/rtc/rtc-s3c.c:422: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)) { WARNING: Missing a blank line after declarations #451: FILE: drivers/rtc/rtc-s3c.c:451: + struct s3c_rtc_drv_data *data; + if (pdev->dev.of_node) { WARNING: Missing a blank line after declarations #453: FILE: drivers/rtc/rtc-s3c.c:453: + const struct of_device_id *match; + match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node); WARNING: DT compatible string "samsung,s3c2416-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/ #650: FILE: drivers/rtc/rtc-s3c.c:650: + .compatible = "samsung,s3c2416-rtc", WARNING: DT compatible string "samsung,s3c2443-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/ #653: FILE: drivers/rtc/rtc-s3c.c:653: + .compatible = "samsung,s3c2443-rtc", Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14autofs: the documentation I wanted to readNeilBrown1-0/+520
This documents autofs from the perspective of what the module actually supports rather than how automount is expected to use it. It is formatted using "markdown" and works best with Markdown.pl (markdown_py doesn't like some constructs). [rdunlap@infradead.org: copy editing] Signed-off-by: NeilBrown <neilb@suse.de> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14binfmt_misc: touch up documentation a bitMike Frysinger1-20/+28
Line wrap the content to 80 cols, and add more details to various fields to match the code. Drop reference to a website that does not exist anymore. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14binfmt_misc: expand the register format limit to 1920 bytesMike Frysinger1-1/+1
The current code places a 256 byte limit on the registration format. This ends up being fairly limited when you try to do matching against a binary format like ELF: - the magic & mask formats cannot have any embedded NUL chars (string_unescape_inplace halts at the first NUL) - each escape sequence quadruples the size: \x00 is needed for NUL - trying to match bytes at the start of the file as well as further on leads to a lot of \x00 sequences in the mask - magic & mask have to be the same length (when decoded) - still need bytes for the other fields - impossible! Let's look at a concrete (and common) example: using QEMU to run MIPS ELFs. The name field uses 11 bytes "qemu-mipsel". The interp uses 20 bytes "/usr/bin/qemu-mipsel". The type & flags takes up 4 bytes. We need 7 bytes for the delimiter (usually ":"). We can skip offset. So already we're down to 107 bytes to use with the magic/mask instead of the real limit of 128 (BINPRM_BUF_SIZE). If people use shell code to register (which they do the majority of the time), they're down to ~26 possible bytes since the escape sequence must be \x##. The ELF format looks like (both 32 & 64 bit): e_ident: 16 bytes e_type: 2 bytes e_machine: 2 bytes Those 20 bytes are enough for most architectures because they have so few formats in the first place, thus they can be uniquely identified. That also means for shell users, since 20 is smaller than 26, they can sanely register a handler. But for some targets (like MIPS), we need to poke further. The ELF fields continue on: e_entry: 4 or 8 bytes e_phoff: 4 or 8 bytes e_shoff: 4 or 8 bytes e_flags: 4 bytes We only care about e_flags here as that includes the bits to identify whether the ELF is O32/N32/N64. But now we have to consume another 16 bytes (for 32 bit ELFs) or 28 bytes (for 64 bit ELFs) just to match the flags. If every byte is escaped, we send 288 more bytes to the kernel ((20 {e_ident,e_type,e_machine} + 12 {e_entry,e_phoff,e_shoff} + 4 {e_flags}) * 2 {mask,magic} * 4 {escape}) and we've clearly blown our budget. Even if we try to be clever and do the decoding ourselves (rather than relying on the kernel to process \x##), we still can't hit the mark -- string_unescape_inplace treats mask & magic as C strings so NUL cannot be embedded. That leaves us with having to pass \x00 for the 12/24 entry/phoff/shoff bytes (as those will be completely random addresses), and that is a minimum requirement of 48/96 bytes for the mask alone. Add up the rest and we blow through it (this is for 64 bit ELFs): magic: 20 {e_ident,e_type,e_machine} + 24 {e_entry,e_phoff,e_shoff} + 4 {e_flags} = 48 # ^^ See note below. mask: 20 {e_ident,e_type,e_machine} + 96 {e_entry,e_phoff,e_shoff} + 4 {e_flags} = 120 Remember above we had 107 left over, and now we're at 168. This is of course the *best* case scenario -- you'll also want to have NUL bytes in the magic & mask too to match literal zeros. Note: the reason we can use 24 in the magic is that we can work off of the fact that for bytes the mask would clobber, we can stuff any value into magic that we want. So when mask is \x00, we don't need the magic to also be \x00, it can be an unescaped raw byte like '!'. This lets us handle more formats (barely) under the current 256 limit, but that's a pretty tall hoop to force people to jump through. With all that said, let's bump the limit from 256 bytes to 1920. This way we support escaping every byte of the mask & magic field (which is 1024 bytes by themselves -- 128 * 4 * 2), and we leave plenty of room for other fields. Like long paths to the interpreter (when you have source in your /really/long/homedir/qemu/foo). Since the current code stuffs more than one structure into the same buffer, we leave a bit of space to easily round up to 2k. 1920 is just as arbitrary as 256 ;). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-13Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-48/+292
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave Hansen) - Various sched/idle refinements for better idle handling (Nicolas Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot) - sched/numa updates and optimizations (Rik van Riel) - sysbench speedup (Vincent Guittot) - capacity calculation cleanups/refactoring (Vincent Guittot) - Various cleanups to thread group iteration (Oleg Nesterov) - Double-rq-lock removal optimization and various refactorings (Kirill Tkhai) - various sched/deadline fixes ... and lots of other changes" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/dl: Use dl_bw_of() under rcu_read_lock_sched() sched/fair: Delete resched_cpu() from idle_balance() sched, time: Fix build error with 64 bit cputime_t on 32 bit systems sched: Improve sysbench performance by fixing spurious active migration sched/x86: Fix up typo in topology detection x86, sched: Add new topology for multi-NUMA-node CPUs sched/rt: Use resched_curr() in task_tick_rt() sched: Use rq->rd in sched_setaffinity() under RCU read lock sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask' sched: Use dl_bw_of() under RCU read lock sched/fair: Remove duplicate code from can_migrate_task() sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW sched: print_rq(): Don't use tasklist_lock sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock() sched: Fix the task-group check in tg_has_rt_tasks() sched/fair: Leverage the idle state info when choosing the "idlest" cpu sched: Let the scheduler see CPU idle states sched/deadline: Fix inter- exclusive cpusets migrations sched/deadline: Clear dl_entity params when setscheduling to different class sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault() ...
2014-10-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds9-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The main updates in this cycle were: - mutex MCS refactoring finishing touches: improve comments, refactor and clean up code, reduce debug data structure footprint, etc. - qrwlock finishing touches: remove old code, self-test updates. - small rwsem optimization - various smaller fixes/cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Revert qrwlock recusive stuff locking/rwsem: Avoid double checking before try acquiring write lock locking/rwsem: Move EXPORT_SYMBOL() lines to follow function definition locking/rwlock, x86: Delete unused asm/rwlock.h and rwlock.S locking/rwlock, x86: Clean up asm/spinlock*.h to remove old rwlock code locking/semaphore: Resolve some shadow warnings locking/selftest: Support queued rwlock locking/lockdep: Restrict the use of recursive read_lock() with qrwlock locking/spinlocks: Always evaluate the second argument of spin_lock_nested() locking/Documentation: Update locking/mutex-design.txt disadvantages locking/Documentation: Move locking related docs into Documentation/locking/ locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate locking/mutexes: Refactor optimistic spinning code locking/mcs: Remove obsolete comment locking/mutexes: Document quick lock release when unlocking locking/mutexes: Standardize arguments in lock/unlock slowpaths locking: Remove deprecated smp_mb__() barriers
2014-10-13Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds4-72/+304
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - changes related to No-CBs CPUs and NO_HZ_FULL - RCU-tasks implementation - torture-test updates - miscellaneous fixes - locktorture updates - RCU documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits) workqueue: Use cond_resched_rcu_qs macro workqueue: Add quiescent state between work items locktorture: Cleanup header usage locktorture: Cannot hold read and write lock locktorture: Fix __acquire annotation for spinlock irq locktorture: Support rwlocks rcu: Eliminate deadlock between CPU hotplug and expedited grace periods locktorture: Document boot/module parameters rcutorture: Rename rcutorture_runnable parameter locktorture: Add test scenario for rwsem_lock locktorture: Add test scenario for mutex_lock locktorture: Make torture scripting account for new _runnable name locktorture: Introduce torture context locktorture: Support rwsems locktorture: Add infrastructure for torturing read locks torture: Address race in module cleanup locktorture: Make statistics generic locktorture: Teach about lock debugging locktorture: Support mutexes locktorture: Add documentation ...
2014-10-13Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The big thing in this pile is Eric's unmount-on-rmdir series; we finally have everything we need for that. The final piece of prereqs is delayed mntput() - now filesystem shutdown always happens on shallow stack. Other than that, we have several new primitives for iov_iter (Matt Wilcox, culled from his XIP-related series) pushing the conversion to ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c cleanups and fixes (including the external name refcounting, which gives consistent behaviour of d_move() wrt procfs symlinks for long and short names alike) and assorted cleanups and fixes all over the place. This is just the first pile; there's a lot of stuff from various people that ought to go in this window. Starting with unionmount/overlayfs mess... ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits) fs/file_table.c: Update alloc_file() comment vfs: Deduplicate code shared by xattr system calls operating on paths reiserfs: remove pointless forward declaration of struct nameidata don't need that forward declaration of struct nameidata in dcache.h anymore take dname_external() into fs/dcache.c let path_init() failures treated the same way as subsequent link_path_walk() fix misuses of f_count() in ppp and netlink ncpfs: use list_for_each_entry() for d_subdirs walk vfs: move getname() from callers to do_mount() gfs2_atomic_open(): skip lookups on hashed dentry [infiniband] remove pointless assignments gadgetfs: saner API for gadgetfs_create_file() f_fs: saner API for ffs_sb_create_file() jfs: don't hash direct inode [s390] remove pointless assignment of ->f_op in vmlogrdr ->open() ecryptfs: ->f_op is never NULL android: ->f_op is never NULL nouveau: __iomem misannotations missing annotation in fs/file.c fs: namespace: suppress 'may be used uninitialized' warnings ...
2014-10-12Merge branch 'next' of ↵Linus Torvalds2-14/+53
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris. Mostly ima, selinux, smack and key handling updates. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits) integrity: do zero padding of the key id KEYS: output last portion of fingerprint in /proc/keys KEYS: strip 'id:' from ca_keyid KEYS: use swapped SKID for performing partial matching KEYS: Restore partial ID matching functionality for asymmetric keys X.509: If available, use the raw subjKeyId to form the key description KEYS: handle error code encoded in pointer selinux: normalize audit log formatting selinux: cleanup error reporting in selinux_nlmsg_perm() KEYS: Check hex2bin()'s return when generating an asymmetric key ID ima: detect violations for mmaped files ima: fix race condition on ima_rdwr_violation_check and process_measurement ima: added ima_policy_flag variable ima: return an error code from ima_add_boot_aggregate() ima: provide 'ima_appraise=log' kernel option ima: move keyring initialization to ima_init() PKCS#7: Handle PKCS#7 messages that contain no X.509 certs PKCS#7: Better handling of unsupported crypto KEYS: Overhaul key identification when searching for asymmetric keys KEYS: Implement binary asymmetric key ID handling ...
2014-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-3/+11
Pull networking fixes from David Miller: "This set fixes a bunch of fallout from the changes that went in during this merge window, particularly: - Fix fsl_pq_mdio (Claudiu Manoil) and fm10k (Pranith Kumar) build failures. - Several networking drivers do atomic_set() on page counts where that's not exactly legal. From Eric Dumazet. - Make __skb_flow_get_ports() work cleanly with unaligned data, from Alexander Duyck. - Fix some kernel-doc buglets in rfkill and netlabel, from Fabian Frederick. - Unbalanced enable_irq_wake usage in bcmgenet and systemport drivers, from Florian Fainelli. - pxa168_eth needs to depend on HAS_DMA, from Geert Uytterhoeven. - Multi-dequeue in the qdisc layer severely bypasses the fairness limits the previous code used to enforce, reintroduce in a way that at the same time doesn't compromise bulk dequeue opportunities. From Jesper Dangaard Brouer. - macvlan receive path unnecessarily hops through a softirq by using netif_rx() instead of netif_receive_skb(). From Jason Baron" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits) net: systemport: avoid unbalanced enable_irq_wake calls net: bcmgenet: avoid unbalanced enable_irq_wake calls net: bcmgenet: fix off-by-one in incrementing read pointer net: fix races in page->_count manipulation mlx4: fix race accessing page->_count ixgbe: fix race accessing page->_count igb: fix race accessing page->_count fm10k: fix race accessing page->_count net/phy: micrel: Add clock support for KSZ8021/KSZ8031 flow-dissector: Fix alignment issue in __skb_flow_get_ports net: filter: fix the comments Documentation: replace __sk_run_filter with __bpf_prog_run macvlan: optimize the receive path macvlan: pass 'bool' type to macvlan_count_rx() drivers: net: xgene: Add 10GbE ethtool support drivers: net: xgene: Add 10GbE support drivers: net: xgene: Preparing for adding 10GbE support dtb: Add 10GbE node to APM X-Gene SoC device tree Documentation: dts: Update section header for APM X-Gene MAINTAINERS: Update APM X-Gene section ...
2014-10-11Merge branch 'for-linus' of ↵Linus Torvalds7-9/+547
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Here's a first pull request for powerpc updates for 3.18. The bulk of the additions are for the "cxl" driver, for IBM's Coherent Accelerator Processor Interface (CAPI). Most of it's in drivers/misc, which Greg & Arnd maintain, Greg said he was happy for us to take it through our tree. There's the usual minor cleanups and fixes, including a bit of noise in drivers from some of those. A bunch of updates to our EEH code, which has been getting more testing. Several nice speedups from Anton, including 20% in clear_page(). And a bunch of updates for freescale from Scott" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits) cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking cxl: Add documentation for userspace APIs cxl: Add driver to Kbuild and Makefiles cxl: Add userspace header file cxl: Driver code for powernv PCIe based cards for userspace access cxl: Add base builtin support powerpc/mm: Add hooks for cxl powerpc/opal: Add PHB to cxl mode call powerpc/mm: Add new hash_page_mm() powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts cxl: Add new header for call backs and structs powerpc/powernv: Split out set MSI IRQ chip code powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize powerpc/msi: Improve IRQ bitmap allocator powerpc/cell: Make spu_flush_all_slbs() generic powerpc/cell: Move data segment faulting code out of cell platform powerpc/cell: Move spu_handle_mm_fault() out of cell platform powerpc/pseries: Use new defines when calling H_SET_MODE powerpc: Update contact info in Documentation files powerpc/perf/hv-24x7: Simplify catalog_read() ...
2014-10-11Input: i8042 - disable active multiplexing by defaultDmitry Torokhov1-1/+1
Active multiplexing is a nice feature as it allows several pointing devices (such as touchpad and external mouse) use their native protocols at the same time. Unfortunately many manufacturers do not implement the feature properly even though they advertise it. The problematic implementations are never fixed, since Windows by default does not use this mode, and move from one BIOS/model of laptop to another. When active multiplexing is broken turning it on usually results in touchpad, keyboard, or both unresponsive. With PS/2 usage on decline (most of PS/2 devices in use nowadays are internal laptop touchpads), I expect number of users who have laptops with working MUX implementation, docking stations with external PS/2 ports, and who are still using external PS/2 mice, to be rather small. Let's flip the default to be OFF and allow activating it through i8042.nomux=0 kernel option. We'll also keep DMI table where we can record known good models. Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Merge tag 'v3.17' into nextDmitry Torokhov29-62/+408
Synchronize with mainline to bring in changes to Synaptics and i8042 drivers.
2014-10-11Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linuxLinus Torvalds2-8/+10
Pull file locking related changes from Jeff Layton: "This release is a little more busy for file locking changes than the last: - a set of patches from Kinglong Mee to fix the lockowner handling in knfsd - a pile of cleanups to the internal file lease API. This should get us a bit closer to allowing for setlease methods that can block. There are some dependencies between mine and Bruce's trees this cycle, and I based my tree on top of the requisite patches in Bruce's tree" * tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits) locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING locks: flock_make_lock should return a struct file_lock (or PTR_ERR) locks: set fl_owner for leases to filp instead of current->files locks: give lm_break a return value locks: __break_lease cleanup in preparation of allowing direct removal of leases locks: remove i_have_this_lease check from __break_lease locks: move freeing of leases outside of i_lock locks: move i_lock acquisition into generic_*_lease handlers locks: define a lm_setup handler for leases locks: plumb a "priv" pointer into the setlease routines nfsd: don't keep a pointer to the lease in nfs4_file locks: clean up vfs_setlease kerneldoc comments locks: generic_delete_lease doesn't need a file_lock at all nfsd: fix potential lease memory leak in nfs4_setlease locks: close potential race in lease_get_mtime security: make security_file_set_fowner, f_setown and __f_setown void return locks: consolidate "nolease" routines locks: remove lock_may_read and lock_may_write lockd: rip out deferred lock handling from testlock codepath NFSD: Get reference of lockowner when coping file_lock ...
2014-10-11Merge tag 'devicetree-for-linus' of ↵Linus Torvalds4-15/+97
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "This branch contains bug fixes and new features for the devicetree code. Most of the changes are either new testcases for the selftest code or documentation changes. The most notable change is the addition of a phandle resolver for use when grafting in a second device tree blob into the core tree. The resolver isn't currently used by anything other than the selftest module, but it will be used to support device tree overlays; probably in the v3.19 timeframe. Also note that I've moved my normal tree from git.secretlab.ca to git.kernel.org" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/selftest: Move hash table off stack to fix large frame size To remove non-ascii characters in of_selftest.txt of/selftest: Use the resolver to fixup phandles of: Introduce Device Tree resolve support. of/selftest: Add a test for duplicate phandles of: Don't try to search when phandle == 0 of/selftest: Test structure of device tree of: Fix NULL dereference in selftest removal code of: add vendor prefix for Chipidea of: Add vendor prefix for Innolux Corporation of: Add vendor prefix for Sitronix devicetree: bindings: Document Gateworks vendor prefix of: Add vendor prefix for Energy Micro dt/documentation: add specification of dma bus information
2014-10-11Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds3-2/+9
Pull MMC updates from Ulf Hansson: "MMC core: - Fix SDIO IRQ bug - MMC regulator improvements - Fix slot-gpio card detect bug - Add support for Driver Stage Register - Convert the common MMC OF parser to use GPIO descriptors - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk() - Some additional minor fixes MMC host: - mmci: Support Qualcomm specific DML layer for DMA - dw_mmc: Use common MMC regulators - dw_mmc: Add support for Rock-chips RK3288 - tmio: Enable runtime PM support - tmio: Add support for R-Car Gen2 SoCs - tmio: Several fixes and improvements - omap_hsmmc: Removed Balaji from MAINTAINERS - jz4740: add DMA and pre/post support - sdhci: Add support for Intel Braswell - sdhci: Several fixes and improvements" * tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits) ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency mmc: sdhci-acpi: Pass HID and UID to probe_slot mmc: sdhci-acpi: Get UID directly from acpi_device mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency mmc: sdhci: Let a driver override timeout clock frequency mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers mmc: sdhci: Add quirk for always getting TC with stop cmd mmc: core: restore detect line inversion semantics mmc: Fix incorrect warning when setting 0 Hz via debugfs mmc: Fix use of wrong device in mmc_gpiod_free_cd() mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot mmc: rtsx_pci: Set power related cap2 macros mmc: core: Add new power_mode MMC_POWER_UNDEFINED mmc: sdhci: execute tuning when device is not busy mmc: atmel-mci: Release mmc resources on failure in probe ..
2014-10-10Merge tag 'sound-3.18-rc1' of ↵Linus Torvalds14-21/+389
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This time it's a relatively calm update batch, but the amount isn't too small in the end. Here we go over some highlights: ALSA core: - One major change is the support of nonatomic PCM operations. This allows the trigger and other callbacks to call schedule(), which would be useful for mailbox type communications. Already some drivers (Digigram ones) have been converted to use together with threaded irqs as an example. - Improvement / fixes of DSD PCM format support HD-audio: - Large volume of rewrites are found in Realtek codec driver for converting Dell and HP quirks to generic forms. - Inverted dmic code cleanup from David. - Realtek COEF access has been optimized. - Now HD-audio jack infrastructure allows multiple callbacks, which fixes / simplifies the jack-dependent power controls on STAC/IDT and VIA codecs. - Many additional device-specific fixups as usual - A few deadcode cleanups, CA0132 code cleanup, etc. ASoC: - More componentization work from Lars-Peter, this time mainly cleaning up the suspend and bias level transition callbacks. - Real system support for the Intel drivers and a bunch of fixes and enhancements for the associated CODEC drivers, this is going to need a lot quirks over time due to the lack of any firmware description of the boards. - Jack detect support for simple card from Dylan Reid. - A bunch of small fixes and enhancements for the Freescale drivers. - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32, Everest Semiconductor ES8328 and Freescale cards using the ASRC in newer i.MX processors. - A few simple-card fixes, mostly cleanups but also a fix for interaction between GPIO 0 and simple-card. Misc: - Virtuoso / Oxygen updates by Clemens - USB-audio: Yamaha MOTIF XF MIDI port name fixes - Conversion of kernel messages to standard dev_*() in ctxfi driver" * tag 'sound-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (251 commits) ASoC: mc13783: Ensure we only try to dereference valid of_nodes ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl ALSA: hda - Add dock port support to Thinkpad L440 (71aa:501e) ALSA: Allow pass NULL dev for snd_pci_quirk_lookup() ASoC: imx-es8328: Fix of_node_put() call with uninitialized object ASoC: soc-pcm: fix sig_bits determination in soc_pcm_apply_msb() ASoC: simple-card: Initialize headphone and mic GPIO numbers ASoC: imx-es8328: Fix missing return code in imx_es8328_probe() ALSA: hda - Add dock support for Thinkpad T440 (17aa:2212) ALSA: usb: caiaq: check for cdev->n_streams > 1 ASoC: 88pm860x-codec: Fix possibly missing string termination ASoC: core: fix use after free in snd_soc_remove_platform() ASoC: soc-dapm: fix use after free ALSA: hda - Make the inv dmic handling for Realtek use generic parser ALSA: hda - Add Inverted Internal mic for Samsung Ativ book 9 (NP900X3G) ALSA: hda - Add inverted internal mic for Asus Aspire 4830T ASoC: Intel: byt-rt5640: fix coccinelle warnings ASoC: fsl_esai doc: Add "fsl,vf610-esai" as compatible string ASoC: da732x: Remove unnecessary KERN_ERR in pr_err() ASoC: simple-card: Fix detect gpio documentation. ...