summaryrefslogtreecommitdiff
path: root/Documentation/admin-guide/media
AgeCommit message (Collapse)AuthorFilesLines
2024-06-29media: em28xx: Add support for MyGica UTV3Nils Rothaug1-0/+8
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card that has analog TV, composite video, and FM radio inputs, an IR remote, and provides audio only as Line Out, but not over USB. Mine is prepared for an FM tuner, but not equipped with one. Support for FM radio is therefore missing. The device contains: - Empia EM2860 USB bridge - Philips SAA7113 video decoder - NXP TDA9801T demodulator - Tena TNF931D-DFDR1 tuner - ST HCF4052 demux, switches input audio to Line Out Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-29media: tuner-simple: Add support for Tena TNF931D-DFDR1Nils Rothaug1-0/+2
Tuner ranges were determined by USB capturing the vendor driver of a MyGica UTV3 video capture card. Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-28documentation: media: vivid: Update documentation on vivid loopback supportDorcas Anono Litunya1-23/+29
Modify section "Video and Sliced VBI Looping" in Documentation to explain the vivid loopback support for video across multiple vivid instances. Previous documentation is out-of-date as it was explaining looping in a single vivid instance only. Also, in "Some Future Improvements" the item "Add support to loop from a specific output to a specific input across vivid instances" can be dropped since that's now implemented. Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-28media: vivid: loopback based on 'Connected To' controlsHans Verkuil1-5/+0
Instead of using hardwired video loopback limited to a single vivid instance, use the new 'Connected To' controls to only loopback if an HDMI or S-Video input is connected to another output, which can be in another vivid instance. Effectively this emulates connecting and disconnecting an HDMI/S-Video cable. The Loop Video control is dropped since it has now been replaced by the new 'Connected To' controls. The Display Present has also been dropped since it no longer fits. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Co-developed-by: Dorcas Anono Litunya <anonolitunya@gmail.com> Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
2024-06-28media: Documentation: vivid.rst: Remove documentation for Capture OverlayDorcas Anono Litunya1-68/+0
Modifying documentation to remove 'Capture Overlay section' as destructive capture overlay support was removed. See commit ccaa9d50ca73 ("media: vivid: drop overlay support") Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-28media: Documentation: vivid.rst: add supports_requestsHans Verkuil1-0/+9
The module option supports_requests was not documented, add it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-28media: Documentation: vivid.rst: drop "Video, VBI and RDS Looping"Hans Verkuil1-15/+17
Drop the "Video, VBI and RDS Looping" section, instead moving the Video/VBI info to section "Video and Sliced VBI looping" and the RDS info to section "Radio & RDS Looping". Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-28media: Documentation: vivid.rst: fix confusing section refsHans Verkuil1-20/+21
The documentation contained several instances of "section X" references, which no longer map to whatever X was. Replace these by the section titles. Also fix a single confusing typo in the "Radio & RDS Looping" section: "are regular frequency intervals" -> "at regular frequency intervals" Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-27media: admin-guide: Document the Raspberry Pi PiSP BEJacopo Mondi3-0/+130
Add documentation for the PiSP Back End memory-to-memory ISP. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-24media: Documentation: ipu6: Fix examples in ipu6-isys admin-guideSamuel Wein1-7/+7
Fix flags in X1 Yoga example. MEDIA_LNK_FL_DYNAMIC (0x4 in the link flag) was removed in V4 Intel IPU6 and IPU6 input system drivers. Added -V flag to media-ctl commands for X1 Yoga, lower-case v only makes it verbose upper-case V sets the format. Signed-off-by: Samuel Wein <sam@samwein.com> [Sakari Ailus: Align subject line, rewrap commit message.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-29media: Documentation: add Intel IPU6 ISYS driver admin-guide docBingbu Cao3-0/+710
This document mainly describe the functionality of IPU6 and IPU6 isys driver, and gives an example that how user can do imaging capture with tools. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-04-08media: admin-guide: Fix mgb4 driver documentation structureMartin Tůma1-20/+15
Fix the mgb4 driver documentation structure that breaks the "Video4Linux (V4L) driver-specific documentation" outline. Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-02-16doc: media: visl: Document tpg_verbose parameterDetlev Casanova1-2/+10
Also document stable frames and what it means for testing tools. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: add media: prefix to Subject]
2024-02-05documentation: media: vivid: Modify typo in documentationDorcas Anono Litunya1-1/+1
Correct the default value of node_type vivid parameter to 0xe1d3d. Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-01-12Merge tag 'media/v6.8-2' of ↵Linus Torvalds4-0/+87
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - v4l core: subdev frame interval now supports which field - v4l kapi: moves and renames the init_cfg pad op to init_state as an internal op. - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900 - new camera driver: STM32 DCMIPP - s5p-mfc has gained MFC v12 support - new ISP driver added to staging: Starfive - new stateful encoder/decoded: Wave5 codec It is found on the J721S2 SoC, JH7100 SoC, ssd202d SoC. Etc. - fwnode gained support for MIPI "DisCo for Imaging" (https://www.mipi.org/specifications/mipi-disco-imaging) - as usual, lots of cleanups, fixups and driver improvements. * tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits) media: i2c: thp7312: select CONFIG_FW_LOADER media: i2c: mt9m114: use fsleep() in place of udelay() media: videobuf2: core: Rename min_buffers_needed field in vb2_queue media: i2c: thp7312: Store frame interval in subdev state media: docs: uAPI: Fix documentation of 'which' field for routing ioctls media: docs: uAPI: Expand error documentation for invalid 'which' value media: docs: uAPI: Clarify error documentation for invalid 'which' value media: v4l2-subdev: Store frame interval in subdev state media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF media: s5p-mfc: Load firmware for each run in MFCv12. media: s5p-mfc: Set context for valid case before calling try_run media: s5p-mfc: Add support for DMABUF for encoder media: s5p-mfc: Add support for UHD encoding. media: s5p-mfc: Add support for rate controls in MFCv12 media: s5p-mfc: Add YV12 and I420 multiplanar format support media: s5p-mfc: Add initial support for MFCv12 media: s5p-mfc: Rename IS_MFCV10 macro ...
2023-12-07doc: media: visl: Add AV1 supportDetlev Casanova1-0/+2
Add AV1 information in visl documentation. Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-11-17Merge branch 'vegard' into docs-mwJonathan Corbet1-9/+1
Vegard Nossum writes: This patch series replaces some instances of 'class:: toc-title' with toctree's :caption: attribute, see the last patch in the series for some more rationale/explanation.
2023-11-17media: admin-guide: properly format ToC headingVegard Nossum1-9/+1
"class:: toc-title" was a workaround for older Sphinx versions that are no longer supported. The canonical way to add a heading to the ToC is to use :caption:. Do that. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20231027081830.195056-4-vegard.nossum@oracle.com
2023-11-16media: admin-guide: Add starfive_camss.rst for Starfive Camera SubsystemJack Zhu3-0/+85
Add starfive_camss.rst file that documents the Starfive Camera Subsystem driver which is used for handing image sensor data. Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: visl: use canonical ftrace pathRoss Zwisler1-3/+3
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Update the visl decoder driver documentation to use this tracefs path. Signed-off-by: Ross Zwisler <zwisler@google.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-07media: Documentation: Added Digiteq Automotive MGB4 driver documentationMartin Tůma3-0/+376
The "admin-guide" documentation for the Digiteq Automotive MGB4 driver. Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-07-19media: docs: qcom_camss: Update Code Aurora referencesJeffrey Hugo1-3/+3
source.codeaurora.org is no longer accessible and so the reference links in the documentation are not useful. The content was mirrored over to Code Linaro so lets update the references to point there instead. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-25media: admin-guide: Update rkisp1.rstJack Zhu1-2/+2
Update Rockchip ISP1 driver file path Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-15media: i2c: Drop unused vs6624 camera sensor driverLaurent Pinchart1-1/+0
The vs6624 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v4.17. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused sr030pc30 camera sensor driverLaurent Pinchart1-1/+0
The sr030pc30 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v2.6.37. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused s5k6aa camera sensor driverLaurent Pinchart1-1/+0
The s5k6aa camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused noon010pc30 camera sensor driverLaurent Pinchart1-1/+0
The noon010pc30 camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.16. A device tree file referencing the device has been added in v3.17, but without corresponding DT bindings, and with DT support in the driver. The driver thus hasn't been used since v316. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused mt9t001 camera sensor driverLaurent Pinchart1-1/+0
The mt9t001 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.2. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused mt9m032 camera sensor driverLaurent Pinchart1-1/+0
The mt9m032 camera sensor driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.4. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused m5mols camera sensor driverLaurent Pinchart1-1/+0
The m5mols camera sensor driver doesn't support DT and relies on platform data. The last board files supplying platform data for that device have been removed from the kernel in v3.11. The driver hasn't been used since them. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: i2c: Drop unused ad9389b video encoder driverLaurent Pinchart1-1/+0
The ad9389b video encoder driver doesn't support DT and relies on platform data. No board file has ever provided platform data for that device. The driver has thus never been used in the mainline kernel since its introduction in v3.7. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: Documentation: admin-guide: cec.rst: document NTP issueHans Verkuil1-0/+9
The CEC pin framework is affected by NTP daemons speeding up or slowing down the system clock. Document this and explain how to fix this for chronyd. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-03-20media: admin-guide/media/cec.rst: update CEC debugging docHans Verkuil1-34/+36
The documentation on how to create your own Raspberry Pi CEC debugger was a bit out of date. Update it to the Raspberry Pi 4B, drop the mention of the RTC and a link to a picture that no longer works. Also reorganize the text to make it easier to follow and change the pins to match the pins I use. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-26Merge tag 'media/v6.3-1' of ↵Linus Torvalds11-451/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Removal of several VB1-only deprecated drivers: cpia2, fsl-viu, meye, stkwebcam, tm6000, vpfe_capture and zr364xx - saa7146 recovered from staging/deprecated. We opted to give ti a chance, and, instead of deprecating it, the intention is to write patches migrating it from VB1 to VB2. - av7110 returned from staging/deprecated/ to staging/ as we're not planning on dropping it any time soon - media controller API has gained experimental support for G_ROUTING and streams API. No drivers use it right now. We're planning to add one after -rc1, giving some time to experience the API and eventually have changes during the next development cycle - New sensor drivers: imx296, imx415, ov8858 - Atomisp had lots of changes, specially on its sensor's interface, making atomisp sensor drivers closer to normal sensor drivers - media controller kAPI has gained some helpers to traverse pipelines - uvcvideo now better support power line control - lots of bug fixes, cleanups and driver improvements * tag 'media/v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (296 commits) media: imx-mipi-csis: Check csis_fmt validity before use media: v4l2-subdev.c: clear stream field media: v4l2-ctrls-api.c: move ctrl->is_new = 1 to the correct line media: Revert "media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci" media: Revert "media: av7110: move to staging/media/deprecated/saa7146" media: imx-pxp: convert to regmap media: imx-pxp: Use non-threaded IRQ media: imx-pxp: Introduce pxp_read() and pxp_write() wrappers media: imx-pxp: Implement frame size enumeration media: imx-pxp: Pass pixel format value to find_format() media: imx-pxp: Add media controller support media: imx-pxp: Don't set bus_info manually in .querycap() media: imx-pxp: Sort headers alphabetically media: imx-pxp: add support for i.MX7D media: imx-pxp: make data_path_ctrl0 platform dependent media: imx-pxp: disable LUT block media: imx-pxp: explicitly disable unused blocks media: imx-pxp: extract helper function to setup data path media: imx-pxp: detect PXP version media: dt-bindings: media: fsl-pxp: convert to yaml ...
2023-02-22Merge tag 'docs-6.3' of git://git.lwn.net/linuxLinus Torvalds4-4/+4
Pull documentation updates from Jonathan Corbet: "It has been a moderately calm cycle for documentation; the significant changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ... and the usual set of typo fixes and such" * tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits) Documentation/watchdog/hpwdt: Fix Format Documentation/watchdog/hpwdt: Fix Reference Documentation: core-api: padata: correct spelling docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION docs: Use HTML comments for the kernel-toc SPDX line docs: Add more information to the HTML sidebar Documentation: KVM: Update AMD memory encryption link printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= Documentation: userspace-api: correct spelling Documentation: sparc: correct spelling Documentation: driver-api: correct spelling Documentation: admin-guide: correct spelling docs: add workload-tracing document to admin-guide docs/admin-guide/mm: remove useless markup docs/mm: remove useless markup docs/mm: Physical Memory: remove useless markup docs/sp_SP: Add process magic-number translation docs: ftrace: always use canonical ftrace path Doc/damon: fix the data path error dma-buf: Add "dma-buf" to title of documentation ...
2023-02-06media: docs: admin-guide: media: align HDMI CEC node names with dtschemaKrzysztof Kozlowski1-2/+2
The bindings expect "cec" for HDMI CEC node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-02Documentation: admin-guide: correct spellingRandy Dunlap4-4/+4
Correct spelling problems for Documentation/admin-guide/ as reported by codespell. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: Tejun Heo <tj@kernel.org> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: dm-devel@redhat.com Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-media@vger.kernel.org Cc: linux-mm@kvack.org Link: https://lore.kernel.org/r/20230129231053.20863-2-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-01-22media: tm6000: remove deprecated driverHans Verkuil2-87/+0
The tm6000 driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: zr364xx: remove deprecated driverHans Verkuil4-115/+0
The zr364xx driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: stkwebcam: remove deprecated driverHans Verkuil2-2/+0
The stkwebcam driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: fsl-viu: remove deprecated driverHans Verkuil1-1/+0
The fsl-viu driver does not use the vb2 framework for streaming video, instead it uses the old vb1 framework and nobody stepped in to convert this driver to vb2. The hardware is very old, so the decision was made to remove it altogether since we want to get rid of the old vb1 framework. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: cpia2: remove deprecated driverHans Verkuil4-149/+0
The cpia2 driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-22media: meye: remove this deprecated driverHans Verkuil3-95/+0
The meye driver does not use the vb2 framework for streaming video, instead it implements this in the driver. This is error prone, and nobody stepped in to convert this driver to that framework. The hardware is very old, so the decision was made to remove it altogether. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-01-12media: davinci: remove vpbe supportArnd Bergmann3-67/+0
The davinci dm3xx/dm644x platforms are gone now, and the remaining da8xx platforms do not use the vpbe driver, so the driver can be removed as well. Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-11-25media: vivid.rst: fix TV and S-Video Inputs sectionDeming Wang1-1/+1
remove the double word 'in'. Signed-off-by: Deming Wang <wangdeming@inspur.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: admin-guide: cec.rstHans Verkuil4-24/+371
Document administration details about CEC devices. This was formerly documented in a cec-status.txt I kept on my website, but this really belongs here as an admin guide. Updated the original cec-status.txt, and converted it to .rst. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-25media: visl: add virtual stateless decoder driverDaniel Almeida2-0/+176
A virtual stateless device for stateless uAPI development purposes. This tool's objective is to help the development and testing of userspace applications that use the V4L2 stateless API to decode media. A userspace implementation can use visl to run a decoding loop even when no hardware is available or when the kernel uAPI for the codec has not been upstreamed yet. This can reveal bugs at an early stage. This driver can also trace the contents of the V4L2 controls submitted to it. It can also dump the contents of the vb2 buffers through a debugfs interface. This is in many ways similar to the tracing infrastructure available for other popular encode/decode APIs out there and can help develop a userspace application by using another (working) one as a reference. Note that no actual decoding of video frames is performed by visl. The V4L2 test pattern generator is used to write various debug information to the capture buffers instead. Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-08media: vimc: Update device configuration in the documentationDafna Hirschfeld1-4/+4
Current configuration in the document is outdated and doesn't work. Update it to match the configuration described in the following commit: commit 9b4a9b31b9ae ("media: vimc: Enable set resolution at the scaler src pad") Fixed commit description: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid.rst: loop_video is set on the capture devnodeHans Verkuil1-1/+1
The example on how to use and test Capture Overlay specified the wrong video device node. Back in 2015 the loop_video control moved from the output device to the capture device, but this example code is still referring to the output video device. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-15media: vimc: documentation for lensYunke Cao2-0/+23
Add documentation for vimc-lens. Add a lens into the vimc topology graph. Signed-off-by: Yunke Cao <yunkec@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-17 17:27:46 +0000