summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-11-28s390/pci: Deletion of unnecessary checks before the function call ↵Markus Elfring1-5/+2
"debug_unregister" The debug_unregister() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-28s390/ftrace: provide working ftrace_return_address()Heiko Carstens1-0/+2
The common code ftrace_return_address(n), which is just a wrapper for __builtin_return_address(n), will only work for n > 0 if CONFIG_FRAME_POINTER is set to 'y'. Otherwise it will return 0. Since on s390 we will never have that config option set to 'y' ftrace_return_address() won't work at all for n > 0. Luckily we always compile the kernel with -mkernel-backchain which in turn means that __builtin_return_address(n) will always work. So let ftrace_return_address(n) map to __builtin_return_address(n). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-28s390/sclp_async: add Kconfig option to specify the component idMartin Schwidefsky2-1/+12
Allow to specify the Compoment ID for Call Home via the kernel configuration. This removes the need for distribution specific patch against the sclp_async.c source file. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-21s390/traps: die on translation exceptionsHeiko Carstens1-2/+6
Translation exceptions should never happen, since that implies that either we screwed up the page tables or missed to properly flush the TLB. In both cases we should not just simply kill user space or walk the kernel exception tables. Instead an oops or a panic (panic_on_oops) is the better answer. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-21s390/traps: print interrupt code and instruction length codeHeiko Carstens3-4/+6
It always confuses me to see the mixed instruction length code and interruption code on user space faults, while the message clearly says it is the interruption code. So split the value and print both values separately. Also add the ILC output to the die() message, so thar user and kernel space faults contain the same information. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-19s390/kernel: add system calls for PCI memory accessAlexey Ishchuk7-2/+127
Add the new __NR_s390_pci_mmio_write and __NR_s390_pci_mmio_read system calls to allow user space applications to access device PCI I/O memory pages on s390x platform. [ Martin Schwidefsky: some code beautification ] Signed-off-by: Alexey Ishchuk <aishchuk@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-19s390: fix ptrace of user area if the inferior uses vector registersMartin Schwidefsky1-22/+75
The floating point registers of a process that uses vector instruction are not store into task->thread.fp_regs anymore but in the upper halves of the first 16 vector registers. The ptrace interface for the peeks and pokes to the user area fails to take this into account. Fix __peek_user[_compat] and __poke_user[_compat] to use the vector array for the floating pointer register if the process has one. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-18s390/irq: use irq 0Sebastian Ott2-11/+5
Irq 0 is currently unused on s390. Since there is no reason to do this start counting at the beginning and gain an additional irq. Also correctly report the smallest usable irq number for dynamic allocation. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-18s390/io: add ioport_map stubsFrank Blaschka1-0/+9
add ioport_map stubs to make vfio build on s390. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-18s390/docs: Remove sections that are not related to s390Thomas Huth1-374/+0
Information how to use the GCC pre-processor, objdump, strace, top, etc. are generic and not specific to the S390 architecture, so we do not need this information in Debugging390.txt Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-18s390/docs: Fix the documentation of the address spacesThomas Huth1-27/+61
The information about the address spaces was completely outdated, since the usage of the address spaces changed quite a bit since the early days. This patch now updates the information about the usage of the address spaces, mostly by using the description from Heiko's patch "rework uaccess code - fix locking issues" (457f2180951cdcbfb4657ddcc83b486e93497f56). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-03s390/cpum_sf: Remove initialization of PMU event indexHendrik Brueckner1-1/+0
The git commit c719f56092add9b3d4192f57c64ce7af11105130 "perf: Fix and clean up initialization of pmu::event_idx" removed the PMU event index callback for all architectures but x86, remove the initialization of the event index as well. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-03s390/signal: add sparse annotationsMartin Schwidefsky2-2/+2
Fix the following warnings from the sparse code checker: arch/s390/kernel/signal.c:374:38: warning: cast removes address space of expression arch/s390/kernel/signal.c:374:65: warning: incorrect type in initializer (different address spaces) arch/s390/kernel/signal.c:374:65: expected unsigned short [noderef] [usertype] <asn:1>*svc arch/s390/kernel/signal.c:374:65: got void * arch/s390/kernel/compat_signal.c:437:38: warning: cast removes address space of expression arch/s390/kernel/compat_signal.c:437:65: warning: incorrect type in initializer (different address spaces) arch/s390/kernel/compat_signal.c:437:65: expected unsigned short [noderef] [usertype] <asn:1>*svc arch/s390/kernel/compat_signal.c:437:65: got void * Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-03s390/mm: use correct unlock function in gmap_ipte_notifyMartin Schwidefsky1-1/+1
The page table lock is acquired with a call to get_locked_pte, replace the plain spin_unlock with the correct unlock function pte_unmap_unlock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-03s390/pci: add sparse annotationsMartin Schwidefsky2-4/+8
Fix the following warnings from the sparse code checker: arch/s390/include/asm/pci_io.h:165:49: warning: cast removes address space of expression arch/s390/pci/pci.c:476:44: warning: cast removes address space of expression arch/s390/pci/pci.c:491:36: warning: incorrect type in argument 2 (different address spaces) arch/s390/pci/pci.c:491:36: expected void [noderef] <asn:2>*addr arch/s390/pci/pci.c:491:36: got void *<noident> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-03s390/pci: improve irq number check for msixSebastian Ott3-6/+3
s390s arch_setup_msi_irqs function ensures that we don't return with more irqs than the PCI architecture allows and that a single PCI function doesn't consume more irqs than the kernel is configured for. At least the last check doesn't help much and should take the sum of all irqs into account. Since that's already done by irq_alloc_desc we can remove this check. As for the first check we should use the value provided by the firmware which can be less than what the PCI architecture allows. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-11-03s390/cmpxchg: use compiler builtinsMartin Schwidefsky3-234/+19
The kernel build for s390 fails for gcc compilers with version 3.x, set the minimum required version of gcc to version 4.3. As the atomic builtins are available with all gcc 4.x compilers, use the __sync_val_compare_and_swap and __sync_bool_compare_and_swap functions to replace the complex macro and inline assembler magic in include/asm/cmpxchg.h. The compiler can just-do-it and generates better code with the builtins. While we are at it use __sync_bool_compare_and_swap for the _raw_compare_and_swap function in the spinlock code as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/mm: pmdp_get_and_clear_full optimizationMartin Schwidefsky3-1/+26
Analog to ptep_get_and_clear_full define a variant of the pmpd_get_and_clear primitive which gets the full hint from the mmu_gather struct. This allows s390 to avoid a costly instruction when destroying an address space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/mm: missing pte for gmap_ipte_notify should trigger a VM_BUGDominik Dingel1-2/+1
After fixup_user_fault does not fail we have a writeable pte. That pte might transform but it should not vanish. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/kprobes: make use of NOKPROBE_SYMBOL()Heiko Carstens7-46/+74
Use NOKPROBE_SYMBOL() instead of __kprobes annotation. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/ftrace,kprobes: allow to patch first instructionHeiko Carstens13-92/+214
If the function tracer is enabled, allow to set kprobes on the first instruction of a function (which is the function trace caller): If no kprobe is set handling of enabling and disabling function tracing of a function simply patches the first instruction. Either it is a nop (right now it's an unconditional branch, which skips the mcount block), or it's a branch to the ftrace_caller() function. If a kprobe is being placed on a function tracer calling instruction we encode if we actually have a nop or branch in the remaining bytes after the breakpoint instruction (illegal opcode). This is possible, since the size of the instruction used for the nop and branch is six bytes, while the size of the breakpoint is only two bytes. Therefore the first two bytes contain the illegal opcode and the last four bytes contain either "0" for nop or "1" for branch. The kprobes code will then execute/simulate the correct instruction. Instruction patching for kprobes and function tracer is always done with stop_machine(). Therefore we don't have any races where an instruction is patched concurrently on a different cpu. Besides that also the program check handler which executes the function trace caller instruction won't be executed concurrently to any stop_machine() execution. This allows to keep full fault based kprobes handling which generates correct pt_regs contents automatically. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27kprobes: introduce weak arch_check_ftrace_location() helper functionHeiko Carstens2-7/+12
Introduce weak arch_check_ftrace_location() helper function which architectures can override in order to implement handling of kprobes on function tracer call sites on their own, without depending on common code or implementing the KPROBES_ON_FTRACE feature. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/mm: disable KSM for storage key enabled pagesDominik Dingel3-7/+28
When storage keys are enabled unmerge already merged pages and prevent new pages from being merged. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/mm: prevent and break zero page mappings in case of storage keysDominik Dingel2-1/+17
As soon as storage keys are enabled we need to stop working on zero page mappings to prevent inconsistencies between storage keys and pgste. Otherwise following data corruption could happen: 1) guest enables storage key 2) guest sets storage key for not mapped page X -> change goes to PGSTE 3) guest reads from page X -> as X was not dirty before, the page will be zero page backed, storage key from PGSTE for X will go to storage key for zero page 4) guest sets storage key for not mapped page Y (same logic as above 5) guest reads from page Y -> as Y was not dirty before, the page will be zero page backed, storage key from PGSTE for Y will got to storage key for zero page overwriting storage key for X While holding the mmap sem, we are safe against changes on entries we already fixed, as every fault would need to take the mmap_sem (read). Other vCPUs executing storage key instructions will get a one time interception and be serialized also with mmap_sem. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27mm: introduce mm_forbids_zeropage functionDominik Dingel3-2/+13
Add a new function stub to allow architectures to disable for an mm_structthe backing of non-present, anonymous pages with read-only empty zero pages. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/mm: recfactor global pgste updatesDominik Dingel4-102/+56
Replace the s390 specific page table walker for the pgste updates with a call to the common code walk_page_range function. There are now two pte modification functions, one for the reset of the CMMA state and another one for the initialization of the storage keys. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390: update default configurationMartin Schwidefsky5-74/+32
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/vdso: fix stack corruptionHeiko Carstens4-16/+29
The kernel provided vdso functions do not get a stack frame from the calling function and therefore may not change the stack contents, unless they allocate space on their own. This problem was exposed with 070b7be633dc "s390/vdso: replace stck with stcke" which writes 16 bytes instead of 8 bytes into the stack frame. These additional 8 bytes however were indeed used by the caller (glibc) to save data and therefore this data was corrupted by the vdso code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27s390/time: use stck clock fast for do_account_vtimeMartin Schwidefsky1-0/+4
The last high frequency call site of the STCK instruction is do_account_vtime. Replace it with the faster STCKF instruction. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-26Linux 3.18-rc2Linus Torvalds1-1/+1
2014-10-26Merge tag 'armsoc-for-rc2' of ↵Linus Torvalds18-46/+107
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another small batch of fixes. Most of these make zynq, socfpga and sunxi platforms work a bit better: - due to new requirements for regulators, DWMMC on socfpga broke past v3.17 - SMP spinup fix for socfpga - a few DT fixes for zynq - another option (FIXED_REGULATOR) for sunxi is needed that used to be selected by other options but no longer is. - a couple of small DT fixes for at91 - ...and a couple for i.MX" * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry arm: socfpga: fix fetching cpu1start_addr for SMP ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size
2014-10-26Merge branch 'for-linus' of ↵Linus Torvalds27-58/+3814
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "overlayfs merge + leak fix for d_splice_alias() failure exits" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: overlayfs: embed middle into overlay_readdir_data overlayfs: embed root into overlay_readdir_data overlayfs: make ovl_cache_entry->name an array instead of pointer overlayfs: don't hold ->i_mutex over opening the real directory fix inode leaks on d_splice_alias() failure exits fs: limit filesystem stacking depth overlay: overlay filesystem documentation overlayfs: implement show_options overlayfs: add statfs support overlay filesystem shmem: support RENAME_WHITEOUT ext4: support RENAME_WHITEOUT vfs: add RENAME_WHITEOUT vfs: add whiteout support vfs: export check_sticky() vfs: introduce clone_private_mount() vfs: export __inode_permission() to modules vfs: export do_splice_direct() to modules vfs: add i_op->dentry_open()
2014-10-25Merge tag 'imx-fixes-3.18' of ↵Olof Johansson3-12/+11
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-25ARM: dts: imx28-evk: Let i2c0 run at 100kHzFabio Estevam1-1/+0
Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-25ARM: i.MX6: Fix "emi" clock name typoSteve Longerbeam2-11/+11
Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-24overlayfs: embed middle into overlay_readdir_dataAl Viro1-7/+5
same story... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: embed root into overlay_readdir_dataAl Viro1-6/+5
no sense having it a pointer - all instances have it pointing to local variable in the same stack frame Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: make ovl_cache_entry->name an array instead of pointerAl Viro1-6/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: don't hold ->i_mutex over opening the real directoryAl Viro1-6/+13
just use it to serialize the assignment Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds22-575/+30
Pull MIPS fixes from Ralf Baechle: "This is the first round of fixes and tying up loose ends for MIPS. - plenty of fixes for build errors in specific obscure configurations - remove redundant code on the Lantiq platform - removal of a useless SEAD I2C driver that was causing a build issue - fix an earlier TLB exeption handler fix to also work on Octeon. - fix ISA level dependencies in FPU emulator's instruction decoding. - don't hardcode kernel command line in Octeon software emulator. - fix an earlier fix for the Loondson 2 clock setting" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: SEAD3: Fix I2C device registration. MIPS: SEAD3: Nuke PIC32 I2C driver. MIPS: ftrace: Fix a microMIPS build problem MIPS: MSP71xx: Fix build error MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled MIPS: Prevent compiler warning from cop2_{save,restore} MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle MIPS: idle: Remove leftover __pastwait symbol and its references MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds MIPS: ptrace.h: Add a missing include MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present MIPS: Octeon: Remove special case for simulator command line. MIPS: tlbex: Properly fix HUGE TLB Refill exception handler MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge pci: pci-lantiq: remove duplicate check on resource MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions
2014-10-24Merge tag 'arm64-fixes' of ↵Linus Torvalds13-32/+160
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - enable 48-bit VA space now that KVM has been fixed, together with a couple of fixes for pgd allocation alignment and initial memblock current_limit. There is still a dependency on !ARM_SMMU which needs to be updated as it uses the page table manipulation macros of the host kernel - eBPF fixes following changes/conflicts during the merging window - Compat types affecting compat_elf_prpsinfo - Compilation error on UP builds - ASLR fix when /proc/sys/kernel/randomize_va_space == 0 - DT definitions for CLCD support on ARMv8 model platform * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix memblock current_limit with 64K pages and 48-bit VA arm64: ASLR: Don't randomise text when randomise_va_space == 0 arm64: vexpress: Add CLCD support to the ARMv8 model platform arm64: Fix compilation error on UP builds Documentation/arm64/memory.txt: fix typo net: bpf: arm64: minor fix of type in jited arm64: bpf: add 'load 64-bit immediate' instruction arm64: bpf: add 'shift by register' instructions net: bpf: arm64: address randomize and write protect JIT code arm64: mm: Correct fixmap pagetable types arm64: compat: fix compat types affecting struct compat_elf_prpsinfo arm64: Align less than PAGE_SIZE pgds naturally arm64: Allow 48-bits VA space without ARM_SMMU
2014-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds11-62/+70
Pull two sparc fixes from David Miller: 1) Fix boots with gcc-4.9 compiled sparc64 kernels. 2) Add missing __get_user_pages_fast() on sparc64 to fix hangs on futexes used in transparent hugepage areas. It's really idiotic to have a weak symbolled fallback that just returns zero, and causes this kind of bug. There should be no backup implementation and the link should fail if the architecture fails to provide __get_user_pages_fast() and supports transparent hugepages. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Implement __get_user_pages_fast(). sparc64: Fix register corruption in top-most kernel stack frame during boot.
2014-10-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-85/+282
Pull kvm fixes from Paolo Bonzini: "This is a pretty large update. I think it is roughly as big as what I usually had for the _whole_ rc period. There are a few bad bugs where the guest can OOPS or crash the host. We have also started looking at attack models for nested virtualization; bugs that usually result in the guest ring 0 crashing itself become more worrisome if you have nested virtualization, because the nested guest might bring down the non-nested guest as well. For current uses of nested virtualization these do not really have a security impact, but you never know and bugs are bugs nevertheless. A lot of these bugs are in 3.17 too, resulting in a large number of stable@ Ccs. I checked that all the patches apply there with no conflicts" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vfio: fix unregister kvm_device_ops of vfio KVM: x86: Wrong assertion on paging_tmpl.h kvm: fix excessive pages un-pinning in kvm_iommu_map error path. KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag KVM: x86: Emulator does not decode clflush well KVM: emulate: avoid accessing NULL ctxt->memopp KVM: x86: Decoding guest instructions which cross page boundary may fail kvm: x86: don't kill guest on unknown exit reason kvm: vmx: handle invvpid vm exit gracefully KVM: x86: Handle errors when RIP is set during far jumps KVM: x86: Emulator fixes for eip canonical checks on near branches KVM: x86: Fix wrong masking on relative jump/call KVM: x86: Improve thread safety in pit KVM: x86: Prevent host from panicking on shared MSR writes. KVM: x86: Check non-canonical addresses upon WRMSR
2014-10-24Merge tag 'stable/for-linus-3.18-b-rc1-tag' of ↵Linus Torvalds7-74/+50
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - Fix regression in xen_clocksource_read() which caused all Xen guests to crash early in boot. - Several fixes for super rare race conditions in the p2m. - Assorted other minor fixes. * tag 'stable/for-linus-3.18-b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pci: Allocate memory for physdev_pci_device_add's optarr x86/xen: panic on bad Xen-provided memory map x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read() x86/xen: avoid race in p2m handling x86/xen: delay construction of mfn_list_list x86/xen: avoid writing to freed memory after race in p2m handling xen/balloon: Don't continue ballooning when BP_ECANCELED is encountered
2014-10-24Merge tag 'sound-3.18-rc2' of ↵Linus Torvalds5-18/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a chunk of small fixes since rc1: two PCM core fixes, one is a long-standing annoyance about lockdep and another is an ARM64 mmap fix. The rest are a HD-audio HDMI hotplug notification fix, a fix for missing NULL termination in Realtek codec quirks and a few new device/codec-specific quirks as usual" * tag 'sound-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro ALSA: pcm: Fix false lockdep warnings ALSA: hda - Fix inverted LED gpio setup for Lenovo Ideapad ALSA: hda - hdmi: Fix missing ELD change event on plug/unplug ALSA: usb-audio: Add support for Steinberg UR22 USB interface ALSA: ALC283 codec - Avoid pop noise on headphones during suspend/resume ALSA: pcm: use the same dma mmap codepath both for arm and arm64
2014-10-24Merge tag 'random_for_linus' of ↵Linus Torvalds10-19/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random updates from Ted Ts'o: "This adds a memzero_explicit() call which is guaranteed not to be optimized away by GCC. This is important when we are wiping cryptographically sensitive material" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: crypto: memzero_explicit - make sure to clear out sensitive data random: add and use memzero_explicit() for clearing data
2014-10-24Merge tag 'pm+acpi-3.18-rc2' of ↵Linus Torvalds36-150/+527
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This is material that didn't make it to my 3.18-rc1 pull request for various reasons, mostly related to timing and travel (LinuxCon EU / LPC) plus a couple of fixes for recent bugs. The only really new thing here is the PM QoS class for memory bandwidth, but it is simple enough and users of it will be added in the next cycle. One major change in behavior is that platform devices enumerated by ACPI will use 32-bit DMA mask by default. Also included is an ACPICA update to a new upstream release, but that's mostly cleanups, changes in tools and similar. The rest is fixes and cleanups mostly. Specifics: - Fix for a recent PCI power management change that overlooked the fact that some IRQ chips might not be able to configure PCIe PME for system wakeup from Lucas Stach. - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is called with a wrong ordering of arguments from Zhang Rui. - A bunch of intel_pstate driver fixes (all -stable candidates) from Dirk Brandewie, Gabriele Mazzotta and Pali Rohár. - Fixes for a rather long-standing problem with the OOM killer and the freezer that frozen processes killed by the OOM do not actually release any memory until they are thawed, so OOM-killing them is rather pointless, with a couple of cleanups on top (Michal Hocko, Cong Wang, Rafael J Wysocki). - ACPICA update to upstream release 20140926, inlcuding mostly cleanups reducing differences between the upstream ACPICA and the kernel code, tools changes (acpidump, acpiexec) and support for the _DDN object (Bob Moore, Lv Zheng). - New PM QoS class for memory bandwidth from Tomeu Vizoso. - Default 32-bit DMA mask for platform devices enumerated by ACPI (this change is mostly needed for some drivers development in progress targeted at 3.19) from Heikki Krogerus. - ACPI EC driver cleanups, mostly related to debugging, from Lv Zheng. - cpufreq-dt driver updates from Thomas Petazzoni. - powernv cpuidle driver update from Preeti U Murthy" * tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy PCI / PM: handle failure to enable wakeup on PCIe PME ACPI: invoke acpi_device_wakeup() with correct parameters PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer ACPI / platform: provide default DMA mask cpuidle: powernv: Populate cpuidle state details by querying the device-tree cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ...
2014-10-24Merge branch 'next' of ↵Linus Torvalds31-422/+2222
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...
2014-10-24arm64: Fix memblock current_limit with 64K pages and 48-bit VACatalin Marinas1-4/+8
With 48-bit VA space, the 64K page configuration uses 3 levels instead of 2 and PUD_SIZE != PMD_SIZE. Since with 64K pages we only cover PMD_SIZE with the initial swapper_pg_dir populated in head.S, the memblock current_limit needs to be set accordingly in map_mem() to avoid allocating unmapped memory. The memblock current_limit is progressively increased as more blocks are mapped. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-10-24sparc64: Implement __get_user_pages_fast().David S. Miller1-0/+30
It is not sufficient to only implement get_user_pages_fast(), you must also implement the atomic version __get_user_pages_fast() otherwise you end up using the weak symbol fallback implementation which simply returns zero. This is dangerous, because it causes the futex code to loop forever if transparent hugepages are supported (see get_futex_key()). Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-18 15:30:11 +0000