diff options
Diffstat (limited to 'rr-cache/80b5671bff1a53e466be426e9102e29fffb8680a/preimage')
| -rw-r--r-- | rr-cache/80b5671bff1a53e466be426e9102e29fffb8680a/preimage | 2107 |
1 files changed, 0 insertions, 2107 deletions
diff --git a/rr-cache/80b5671bff1a53e466be426e9102e29fffb8680a/preimage b/rr-cache/80b5671bff1a53e466be426e9102e29fffb8680a/preimage deleted file mode 100644 index 6e8f3212b165..000000000000 --- a/rr-cache/80b5671bff1a53e466be426e9102e29fffb8680a/preimage +++ /dev/null @@ -1,2107 +0,0 @@ -/* - * Copyright © 2008 Intel Corporation - * 2014 Red Hat Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS - * IN THE SOFTWARE. - * - */ - -#include <drm/drm_atomic.h> -#include <drm/drm_atomic_helper.h> -#include <drm/drm_edid.h> -#include <drm/drm_fixed.h> -#include <drm/drm_probe_helper.h> - -#include "i915_drv.h" -#include "i915_reg.h" -#include "intel_atomic.h" -#include "intel_audio.h" -#include "intel_connector.h" -#include "intel_crtc.h" -#include "intel_ddi.h" -#include "intel_de.h" -#include "intel_display_driver.h" -#include "intel_display_types.h" -#include "intel_dp.h" -#include "intel_dp_hdcp.h" -#include "intel_dp_mst.h" -#include "intel_dp_tunnel.h" -#include "intel_dp_link_training.h" -#include "intel_dpio_phy.h" -#include "intel_hdcp.h" -#include "intel_hotplug.h" -#include "intel_link_bw.h" -#include "intel_psr.h" -#include "intel_vdsc.h" -#include "skl_scaler.h" - -static int intel_dp_mst_max_dpt_bpp(const struct intel_crtc_state *crtc_state, - bool dsc) -{ - struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); - const struct drm_display_mode *adjusted_mode = - &crtc_state->hw.adjusted_mode; - - if (!intel_dp_is_uhbr(crtc_state) || DISPLAY_VER(i915) >= 20 || !dsc) - return INT_MAX; - - /* - * DSC->DPT interface width: - * ICL-MTL: 72 bits (each branch has 72 bits, only left branch is used) - * LNL+: 144 bits (not a bottleneck in any config) - * - * Bspec/49259 suggests that the FEC overhead needs to be - * applied here, though HW people claim that neither this FEC - * or any other overhead is applicable here (that is the actual - * available_bw is just symbol_clock * 72). However based on - * testing on MTL-P the - * - DELL U3224KBA display - * - Unigraf UCD-500 CTS test sink - * devices the - * - 5120x2880/995.59Mhz - * - 6016x3384/1357.23Mhz - * - 6144x3456/1413.39Mhz - * modes (all the ones having a DPT limit on the above devices), - * both the channel coding efficiency and an additional 3% - * overhead needs to be accounted for. - */ - return div64_u64(mul_u32_u32(intel_dp_link_symbol_clock(crtc_state->port_clock) * 72, - drm_dp_bw_channel_coding_efficiency(true)), - mul_u32_u32(adjusted_mode->crtc_clock, 1030000)); -} - -static int intel_dp_mst_bw_overhead(const struct intel_crtc_state *crtc_state, - const struct intel_connector *connector, - bool ssc, bool dsc, int bpp_x16) -{ - const struct drm_display_mode *adjusted_mode = - &crtc_state->hw.adjusted_mode; - unsigned long flags = DRM_DP_BW_OVERHEAD_MST; - int dsc_slice_count = 0; - int overhead; - - flags |= intel_dp_is_uhbr(crtc_state) ? DRM_DP_BW_OVERHEAD_UHBR : 0; - flags |= ssc ? DRM_DP_BW_OVERHEAD_SSC_REF_CLK : 0; - flags |= crtc_state->fec_enable ? DRM_DP_BW_OVERHEAD_FEC : 0; - - if (dsc) { - flags |= DRM_DP_BW_OVERHEAD_DSC; - dsc_slice_count = intel_dp_dsc_get_slice_count(connector, - adjusted_mode->clock, - adjusted_mode->hdisplay, - crtc_state->joiner_pipes); - } - - overhead = drm_dp_bw_overhead(crtc_state->lane_count, - adjusted_mode->hdisplay, - dsc_slice_count, - bpp_x16, - flags); - - /* - * TODO: clarify whether a minimum required by the fixed FEC overhead - * in the bspec audio programming sequence is required here. - */ - return max(overhead, intel_dp_bw_fec_overhead(crtc_state->fec_enable)); -} - -static void intel_dp_mst_compute_m_n(const struct intel_crtc_state *crtc_state, - const struct intel_connector *connector, - int overhead, - int bpp_x16, - struct intel_link_m_n *m_n) -{ - const struct drm_display_mode *adjusted_mode = - &crtc_state->hw.adjusted_mode; - - /* TODO: Check WA 14013163432 to set data M/N for full BW utilization. */ - intel_link_compute_m_n(bpp_x16, crtc_state->lane_count, - adjusted_mode->crtc_clock, - crtc_state->port_clock, - overhead, - m_n); - - m_n->tu = DIV_ROUND_UP_ULL(mul_u32_u32(m_n->data_m, 64), m_n->data_n); -} - -static int intel_dp_mst_calc_pbn(int pixel_clock, int bpp_x16, int bw_overhead) -{ - int effective_data_rate = - intel_dp_effective_data_rate(pixel_clock, bpp_x16, bw_overhead); - - /* - * TODO: Use drm_dp_calc_pbn_mode() instead, once it's converted - * to calculate PBN with the BW overhead passed to it. - */ - return DIV_ROUND_UP(effective_data_rate * 64, 54 * 1000); -} - -static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder, - struct intel_crtc_state *crtc_state, - int max_bpp, - int min_bpp, - struct link_config_limits *limits, - struct drm_connector_state *conn_state, - int step, - bool dsc) -{ - struct drm_atomic_state *state = crtc_state->uapi.state; - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_dp *intel_dp = &intel_mst->primary->dp; - struct drm_dp_mst_topology_state *mst_state; - struct intel_connector *connector = - to_intel_connector(conn_state->connector); - struct drm_i915_private *i915 = to_i915(connector->base.dev); - const struct drm_display_mode *adjusted_mode = - &crtc_state->hw.adjusted_mode; - int bpp, slots = -EINVAL; - int max_dpt_bpp; - int ret = 0; - - mst_state = drm_atomic_get_mst_topology_state(state, &intel_dp->mst_mgr); - if (IS_ERR(mst_state)) - return PTR_ERR(mst_state); - - crtc_state->lane_count = limits->max_lane_count; - crtc_state->port_clock = limits->max_rate; - - if (dsc) { - if (!intel_dp_supports_fec(intel_dp, connector, crtc_state)) - return -EINVAL; - - crtc_state->fec_enable = !intel_dp_is_uhbr(crtc_state); - } - - mst_state->pbn_div = drm_dp_get_vc_payload_bw(&intel_dp->mst_mgr, - crtc_state->port_clock, - crtc_state->lane_count); - - max_dpt_bpp = intel_dp_mst_max_dpt_bpp(crtc_state, dsc); - if (max_bpp > max_dpt_bpp) { - drm_dbg_kms(&i915->drm, "Limiting bpp to max DPT bpp (%d -> %d)\n", - max_bpp, max_dpt_bpp); - max_bpp = max_dpt_bpp; - } - - drm_dbg_kms(&i915->drm, "Looking for slots in range min bpp %d max bpp %d\n", - min_bpp, max_bpp); - - for (bpp = max_bpp; bpp >= min_bpp; bpp -= step) { - int local_bw_overhead; - int remote_bw_overhead; - int link_bpp_x16; - int remote_tu; - fixed20_12 pbn; - - drm_dbg_kms(&i915->drm, "Trying bpp %d\n", bpp); - - link_bpp_x16 = fxp_q4_from_int(dsc ? bpp : - intel_dp_output_bpp(crtc_state->output_format, bpp)); - - local_bw_overhead = intel_dp_mst_bw_overhead(crtc_state, connector, - false, dsc, link_bpp_x16); - remote_bw_overhead = intel_dp_mst_bw_overhead(crtc_state, connector, - true, dsc, link_bpp_x16); - - intel_dp_mst_compute_m_n(crtc_state, connector, - local_bw_overhead, - link_bpp_x16, - &crtc_state->dp_m_n); - - /* - * The TU size programmed to the HW determines which slots in - * an MTP frame are used for this stream, which needs to match - * the payload size programmed to the first downstream branch - * device's payload table. - * - * Note that atm the payload's PBN value DRM core sends via - * the ALLOCATE_PAYLOAD side-band message matches the payload - * size (which it calculates from the PBN value) it programs - * to the first branch device's payload table. The allocation - * in the payload table could be reduced though (to - * crtc_state->dp_m_n.tu), provided that the driver doesn't - * enable SSC on the corresponding link. - */ - pbn.full = dfixed_const(intel_dp_mst_calc_pbn(adjusted_mode->crtc_clock, - link_bpp_x16, - remote_bw_overhead)); - remote_tu = DIV_ROUND_UP(pbn.full, mst_state->pbn_div.full); - - /* - * Aligning the TUs ensures that symbols consisting of multiple - * (4) symbol cycles don't get split between two consecutive - * MTPs, as required by Bspec. - * TODO: remove the alignment restriction for 128b/132b links - * on some platforms, where Bspec allows this. - */ - remote_tu = ALIGN(remote_tu, 4 / crtc_state->lane_count); - - /* - * Also align PBNs accordingly, since MST core will derive its - * own copy of TU from the PBN in drm_dp_atomic_find_time_slots(). - * The above comment about the difference between the PBN - * allocated for the whole path and the TUs allocated for the - * first branch device's link also applies here. - */ - pbn.full = remote_tu * mst_state->pbn_div.full; - crtc_state->pbn = dfixed_trunc(pbn); - - drm_WARN_ON(&i915->drm, remote_tu < crtc_state->dp_m_n.tu); - crtc_state->dp_m_n.tu = remote_tu; - - slots = drm_dp_atomic_find_time_slots(state, &intel_dp->mst_mgr, - connector->port, - crtc_state->pbn); - if (slots == -EDEADLK) - return slots; - - if (slots >= 0) { - drm_WARN_ON(&i915->drm, slots != crtc_state->dp_m_n.tu); - - break; - } - } - - /* We failed to find a proper bpp/timeslots, return error */ - if (ret) - slots = ret; - - if (slots < 0) { - drm_dbg_kms(&i915->drm, "failed finding vcpi slots:%d\n", - slots); - } else { - if (!dsc) - crtc_state->pipe_bpp = bpp; - else - crtc_state->dsc.compressed_bpp_x16 = fxp_q4_from_int(bpp); - drm_dbg_kms(&i915->drm, "Got %d slots for pipe bpp %d dsc %d\n", slots, bpp, dsc); - } - - return slots; -} - -static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder, - struct intel_crtc_state *crtc_state, - struct drm_connector_state *conn_state, - struct link_config_limits *limits) -{ - int slots = -EINVAL; - - /* - * FIXME: allocate the BW according to link_bpp, which in the case of - * YUV420 is only half of the pipe bpp value. - */ - slots = intel_dp_mst_find_vcpi_slots_for_bpp(encoder, crtc_state, - fxp_q4_to_int(limits->link.max_bpp_x16), - fxp_q4_to_int(limits->link.min_bpp_x16), - limits, - conn_state, 2 * 3, false); - - if (slots < 0) - return slots; - - return 0; -} - -static int intel_dp_dsc_mst_compute_link_config(struct intel_encoder *encoder, - struct intel_crtc_state *crtc_state, - struct drm_connector_state *conn_state, - struct link_config_limits *limits) -{ - struct intel_connector *connector = - to_intel_connector(conn_state->connector); - struct drm_i915_private *i915 = to_i915(connector->base.dev); - int slots = -EINVAL; - int i, num_bpc; - u8 dsc_bpc[3] = {}; - int min_bpp, max_bpp, sink_min_bpp, sink_max_bpp; - u8 dsc_max_bpc; - int min_compressed_bpp, max_compressed_bpp; - - /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */ - if (DISPLAY_VER(i915) >= 12) - dsc_max_bpc = min_t(u8, 12, conn_state->max_requested_bpc); - else - dsc_max_bpc = min_t(u8, 10, conn_state->max_requested_bpc); - - max_bpp = min_t(u8, dsc_max_bpc * 3, limits->pipe.max_bpp); - min_bpp = limits->pipe.min_bpp; - - num_bpc = drm_dp_dsc_sink_supported_input_bpcs(connector->dp.dsc_dpcd, - dsc_bpc); - - drm_dbg_kms(&i915->drm, "DSC Source supported min bpp %d max bpp %d\n", - min_bpp, max_bpp); - - sink_max_bpp = dsc_bpc[0] * 3; - sink_min_bpp = sink_max_bpp; - - for (i = 1; i < num_bpc; i++) { - if (sink_min_bpp > dsc_bpc[i] * 3) - sink_min_bpp = dsc_bpc[i] * 3; - if (sink_max_bpp < dsc_bpc[i] * 3) - sink_max_bpp = dsc_bpc[i] * 3; - } - - drm_dbg_kms(&i915->drm, "DSC Sink supported min bpp %d max bpp %d\n", - sink_min_bpp, sink_max_bpp); - - if (min_bpp < sink_min_bpp) - min_bpp = sink_min_bpp; - - if (max_bpp > sink_max_bpp) - max_bpp = sink_max_bpp; - - crtc_state->pipe_bpp = max_bpp; - - max_compressed_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector, - crtc_state, - max_bpp / 3); - max_compressed_bpp = min(max_compressed_bpp, - fxp_q4_to_int(limits->link.max_bpp_x16)); - - min_compressed_bpp = intel_dp_dsc_sink_min_compressed_bpp(crtc_state); - min_compressed_bpp = max(min_compressed_bpp, - fxp_q4_to_int_roundup(limits->link.min_bpp_x16)); - - drm_dbg_kms(&i915->drm, "DSC Sink supported compressed min bpp %d compressed max bpp %d\n", - min_compressed_bpp, max_compressed_bpp); - - /* Align compressed bpps according to our own constraints */ - max_compressed_bpp = intel_dp_dsc_nearest_valid_bpp(i915, max_compressed_bpp, - crtc_state->pipe_bpp); - min_compressed_bpp = intel_dp_dsc_nearest_valid_bpp(i915, min_compressed_bpp, - crtc_state->pipe_bpp); - - slots = intel_dp_mst_find_vcpi_slots_for_bpp(encoder, crtc_state, max_compressed_bpp, - min_compressed_bpp, limits, - conn_state, 1, true); - - if (slots < 0) - return slots; - - return 0; -} -static int intel_dp_mst_update_slots(struct intel_encoder *encoder, - struct intel_crtc_state *crtc_state, - struct drm_connector_state *conn_state) -{ - struct drm_i915_private *i915 = to_i915(encoder->base.dev); - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_dp *intel_dp = &intel_mst->primary->dp; - struct drm_dp_mst_topology_mgr *mgr = &intel_dp->mst_mgr; - struct drm_dp_mst_topology_state *topology_state; - u8 link_coding_cap = intel_dp_is_uhbr(crtc_state) ? - DP_CAP_ANSI_128B132B : DP_CAP_ANSI_8B10B; - - topology_state = drm_atomic_get_mst_topology_state(conn_state->state, mgr); - if (IS_ERR(topology_state)) { - drm_dbg_kms(&i915->drm, "slot update failed\n"); - return PTR_ERR(topology_state); - } - - drm_dp_mst_update_slots(topology_state, link_coding_cap); - - return 0; -} - -static int mode_hblank_period_ns(const struct drm_display_mode *mode) -{ - return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(mode->htotal - mode->hdisplay, - NSEC_PER_SEC / 1000), - mode->crtc_clock); -} - -static bool -hblank_expansion_quirk_needs_dsc(const struct intel_connector *connector, - const struct intel_crtc_state *crtc_state, - const struct link_config_limits *limits) -{ - const struct drm_display_mode *adjusted_mode = - &crtc_state->hw.adjusted_mode; - bool is_uhbr_sink = connector->mst_port && - drm_dp_128b132b_supported(connector->mst_port->dpcd); - int hblank_limit = is_uhbr_sink ? 500 : 300; - - if (!connector->dp.dsc_hblank_expansion_quirk) - return false; - - if (is_uhbr_sink && !drm_dp_is_uhbr_rate(limits->max_rate)) - return false; - - if (mode_hblank_period_ns(adjusted_mode) > hblank_limit) - return false; - - return true; -} - -static bool -adjust_limits_for_dsc_hblank_expansion_quirk(const struct intel_connector *connector, - const struct intel_crtc_state *crtc_state, - struct link_config_limits *limits, - bool dsc) -{ - struct drm_i915_private *i915 = to_i915(connector->base.dev); - const struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); - int min_bpp_x16 = limits->link.min_bpp_x16; - - if (!hblank_expansion_quirk_needs_dsc(connector, crtc_state, limits)) - return true; - - if (!dsc) { - if (intel_dp_supports_dsc(connector, crtc_state)) { - drm_dbg_kms(&i915->drm, - "[CRTC:%d:%s][CONNECTOR:%d:%s] DSC needed by hblank expansion quirk\n", - crtc->base.base.id, crtc->base.name, - connector->base.base.id, connector->base.name); - return false; - } - - drm_dbg_kms(&i915->drm, - "[CRTC:%d:%s][CONNECTOR:%d:%s] Increasing link min bpp to 24 due to hblank expansion quirk\n", - crtc->base.base.id, crtc->base.name, - connector->base.base.id, connector->base.name); - - if (limits->link.max_bpp_x16 < fxp_q4_from_int(24)) - return false; - - limits->link.min_bpp_x16 = fxp_q4_from_int(24); - - return true; - } - - drm_WARN_ON(&i915->drm, limits->min_rate != limits->max_rate); - - if (limits->max_rate < 540000) - min_bpp_x16 = fxp_q4_from_int(13); - else if (limits->max_rate < 810000) - min_bpp_x16 = fxp_q4_from_int(10); - - if (limits->link.min_bpp_x16 >= min_bpp_x16) - return true; - - drm_dbg_kms(&i915->drm, - "[CRTC:%d:%s][CONNECTOR:%d:%s] Increasing link min bpp to " FXP_Q4_FMT " in DSC mode due to hblank expansion quirk\n", - crtc->base.base.id, crtc->base.name, - connector->base.base.id, connector->base.name, - FXP_Q4_ARGS(min_bpp_x16)); - - if (limits->link.max_bpp_x16 < min_bpp_x16) - return false; - - limits->link.min_bpp_x16 = min_bpp_x16; - - return true; -} - -static bool -intel_dp_mst_compute_config_limits(struct intel_dp *intel_dp, - const struct intel_connector *connector, - struct intel_crtc_state *crtc_state, - bool dsc, - struct link_config_limits *limits) -{ - /* - * for MST we always configure max link bw - the spec doesn't - * seem to suggest we should do otherwise. - */ - limits->min_rate = limits->max_rate = - intel_dp_max_link_rate(intel_dp); - - limits->min_lane_count = limits->max_lane_count = - intel_dp_max_lane_count(intel_dp); - - limits->pipe.min_bpp = intel_dp_min_bpp(crtc_state->output_format); - /* - * FIXME: If all the streams can't fit into the link with - * their current pipe_bpp we should reduce pipe_bpp across - * the board until things start to fit. Until then we - * limit to <= 8bpc since that's what was hardcoded for all - * MST streams previously. This hack should be removed once - * we have the proper retry logic in place. - */ - limits->pipe.max_bpp = min(crtc_state->pipe_bpp, 24); - - intel_dp_adjust_compliance_config(intel_dp, crtc_state, limits); - - if (!intel_dp_compute_config_link_bpp_limits(intel_dp, - crtc_state, - dsc, - limits)) - return false; - - return adjust_limits_for_dsc_hblank_expansion_quirk(connector, - crtc_state, - limits, - dsc); -} - -static int intel_dp_mst_compute_config(struct intel_encoder *encoder, - struct intel_crtc_state *pipe_config, - struct drm_connector_state *conn_state) -{ - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state); - struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_dp *intel_dp = &intel_mst->primary->dp; - struct intel_connector *connector = - to_intel_connector(conn_state->connector); - const struct drm_display_mode *adjusted_mode = - &pipe_config->hw.adjusted_mode; - struct link_config_limits limits; - bool dsc_needed, joiner_needs_dsc; - int ret = 0; - - if (pipe_config->fec_enable && - !intel_dp_supports_fec(intel_dp, connector, pipe_config)) - return -EINVAL; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - return -EINVAL; - - if (intel_dp_need_joiner(intel_dp, connector, - adjusted_mode->crtc_hdisplay, - adjusted_mode->crtc_clock)) - pipe_config->joiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe); - - pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB; - pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; - pipe_config->has_pch_encoder = false; - - joiner_needs_dsc = intel_dp_joiner_needs_dsc(dev_priv, pipe_config->joiner_pipes); - - dsc_needed = joiner_needs_dsc || intel_dp->force_dsc_en || - !intel_dp_mst_compute_config_limits(intel_dp, - connector, - pipe_config, - false, - &limits); - - if (!dsc_needed) { - ret = intel_dp_mst_compute_link_config(encoder, pipe_config, - conn_state, &limits); - - if (ret == -EDEADLK) - return ret; - - if (ret) - dsc_needed = true; - } - - /* enable compression if the mode doesn't fit available BW */ - if (dsc_needed) { - drm_dbg_kms(&dev_priv->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n", - str_yes_no(ret), str_yes_no(joiner_needs_dsc), - str_yes_no(intel_dp->force_dsc_en)); - - if (!intel_dp_supports_dsc(connector, pipe_config)) - return -EINVAL; - - if (!intel_dp_mst_compute_config_limits(intel_dp, - connector, - pipe_config, - true, - &limits)) - return -EINVAL; - - /* - * FIXME: As bpc is hardcoded to 8, as mentioned above, - * WARN and ignore the debug flag force_dsc_bpc for now. - */ - drm_WARN(&dev_priv->drm, intel_dp->force_dsc_bpc, "Cannot Force BPC for MST\n"); - /* - * Try to get at least some timeslots and then see, if - * we can fit there with DSC. - */ - drm_dbg_kms(&dev_priv->drm, "Trying to find VCPI slots in DSC mode\n"); - - ret = intel_dp_dsc_mst_compute_link_config(encoder, pipe_config, - conn_state, &limits); - if (ret < 0) - return ret; - - ret = intel_dp_dsc_compute_config(intel_dp, pipe_config, - conn_state, &limits, - pipe_config->dp_m_n.tu, false); - } - - if (ret) - return ret; - - ret = intel_dp_mst_update_slots(encoder, pipe_config, conn_state); - if (ret) - return ret; - - pipe_config->limited_color_range = - intel_dp_limited_color_range(pipe_config, conn_state); - - if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) - pipe_config->lane_lat_optim_mask = - bxt_dpio_phy_calc_lane_lat_optim_mask(pipe_config->lane_count); - - intel_dp_audio_compute_config(encoder, pipe_config, conn_state); - - intel_ddi_compute_min_voltage_level(pipe_config); - - intel_psr_compute_config(intel_dp, pipe_config, conn_state); - - return intel_dp_tunnel_atomic_compute_stream_bw(state, intel_dp, connector, - pipe_config); -} - -/* - * Iterate over all connectors and return a mask of - * all CPU transcoders streaming over the same DP link. - */ -static unsigned int -intel_dp_mst_transcoder_mask(struct intel_atomic_state *state, - struct intel_dp *mst_port) -{ - struct drm_i915_private *dev_priv = to_i915(state->base.dev); - const struct intel_digital_connector_state *conn_state; - struct intel_connector *connector; - u8 transcoders = 0; - int i; - - if (DISPLAY_VER(dev_priv) < 12) - return 0; - - for_each_new_intel_connector_in_state(state, connector, conn_state, i) { - const struct intel_crtc_state *crtc_state; - struct intel_crtc *crtc; - - if (connector->mst_port != mst_port || !conn_state->base.crtc) - continue; - - crtc = to_intel_crtc(conn_state->base.crtc); - crtc_state = intel_atomic_get_new_crtc_state(state, crtc); - - if (!crtc_state->hw.active) - continue; - - transcoders |= BIT(crtc_state->cpu_transcoder); - } - - return transcoders; -} - -static u8 get_pipes_downstream_of_mst_port(struct intel_atomic_state *state, - struct drm_dp_mst_topology_mgr *mst_mgr, - struct drm_dp_mst_port *parent_port) -{ - const struct intel_digital_connector_state *conn_state; - struct intel_connector *connector; - u8 mask = 0; - int i; - - for_each_new_intel_connector_in_state(state, connector, conn_state, i) { - if (!conn_state->base.crtc) - continue; - - if (&connector->mst_port->mst_mgr != mst_mgr) - continue; - - if (connector->port != parent_port && - !drm_dp_mst_port_downstream_of_parent(mst_mgr, - connector->port, - parent_port)) - continue; - - mask |= BIT(to_intel_crtc(conn_state->base.crtc)->pipe); - } - - return mask; -} - -static int intel_dp_mst_check_fec_change(struct intel_atomic_state *state, - struct drm_dp_mst_topology_mgr *mst_mgr, - struct intel_link_bw_limits *limits) -{ - struct drm_i915_private *i915 = to_i915(state->base.dev); - struct intel_crtc *crtc; - u8 mst_pipe_mask; - u8 fec_pipe_mask = 0; - int ret; - - mst_pipe_mask = get_pipes_downstream_of_mst_port(state, mst_mgr, NULL); - - for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, mst_pipe_mask) { - struct intel_crtc_state *crtc_state = - intel_atomic_get_new_crtc_state(state, crtc); - - /* Atomic connector check should've added all the MST CRTCs. */ - if (drm_WARN_ON(&i915->drm, !crtc_state)) - return -EINVAL; - - if (crtc_state->fec_enable) - fec_pipe_mask |= BIT(crtc->pipe); - } - - if (!fec_pipe_mask || mst_pipe_mask == fec_pipe_mask) - return 0; - - limits->force_fec_pipes |= mst_pipe_mask; - - ret = intel_modeset_pipes_in_mask_early(state, "MST FEC", - mst_pipe_mask); - - return ret ? : -EAGAIN; -} - -static int intel_dp_mst_check_bw(struct intel_atomic_state *state, - struct drm_dp_mst_topology_mgr *mst_mgr, - struct drm_dp_mst_topology_state *mst_state, - struct intel_link_bw_limits *limits) -{ - struct drm_dp_mst_port *mst_port; - u8 mst_port_pipes; - int ret; - - ret = drm_dp_mst_atomic_check_mgr(&state->base, mst_mgr, mst_state, &mst_port); - if (ret != -ENOSPC) - return ret; - - mst_port_pipes = get_pipes_downstream_of_mst_port(state, mst_mgr, mst_port); - - ret = intel_link_bw_reduce_bpp(state, limits, - mst_port_pipes, "MST link BW"); - - return ret ? : -EAGAIN; -} - -/** - * intel_dp_mst_atomic_check_link - check all modeset MST link configuration - * @state: intel atomic state - * @limits: link BW limits - * - * Check the link configuration for all modeset MST outputs. If the - * configuration is invalid @limits will be updated if possible to - * reduce the total BW, after which the configuration for all CRTCs in - * @state must be recomputed with the updated @limits. - * - * Returns: - * - 0 if the confugration is valid - * - %-EAGAIN, if the configuration is invalid and @limits got updated - * with fallback values with which the configuration of all CRTCs in - * @state must be recomputed - * - Other negative error, if the configuration is invalid without a - * fallback possibility, or the check failed for another reason - */ -int intel_dp_mst_atomic_check_link(struct intel_atomic_state *state, - struct intel_link_bw_limits *limits) -{ - struct drm_dp_mst_topology_mgr *mgr; - struct drm_dp_mst_topology_state *mst_state; - int ret; - int i; - - for_each_new_mst_mgr_in_state(&state->base, mgr, mst_state, i) { - ret = intel_dp_mst_check_fec_change(state, mgr, limits); - if (ret) - return ret; - - ret = intel_dp_mst_check_bw(state, mgr, mst_state, - limits); - if (ret) - return ret; - } - - return 0; -} - -static int intel_dp_mst_compute_config_late(struct intel_encoder *encoder, - struct intel_crtc_state *crtc_state, - struct drm_connector_state *conn_state) -{ - struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state); - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_dp *intel_dp = &intel_mst->primary->dp; - - /* lowest numbered transcoder will be designated master */ - crtc_state->mst_master_transcoder = - ffs(intel_dp_mst_transcoder_mask(state, intel_dp)) - 1; - - return 0; -} - -/* - * If one of the connectors in a MST stream needs a modeset, mark all CRTCs - * that shares the same MST stream as mode changed, - * intel_modeset_pipe_config()+intel_crtc_check_fastset() will take care to do - * a fastset when possible. - * - * On TGL+ this is required since each stream go through a master transcoder, - * so if the master transcoder needs modeset, all other streams in the - * topology need a modeset. All platforms need to add the atomic state - * for all streams in the topology, since a modeset on one may require - * changing the MST link BW usage of the others, which in turn needs a - * recomputation of the corresponding CRTC states. - */ -static int -intel_dp_mst_atomic_topology_check(struct intel_connector *connector, - struct intel_atomic_state *state) -{ - struct drm_i915_private *dev_priv = to_i915(state->base.dev); - struct drm_connector_list_iter connector_list_iter; - struct intel_connector *connector_iter; - int ret = 0; - - if (!intel_connector_needs_modeset(state, &connector->base)) - return 0; - - drm_connector_list_iter_begin(&dev_priv->drm, &connector_list_iter); - for_each_intel_connector_iter(connector_iter, &connector_list_iter) { - struct intel_digital_connector_state *conn_iter_state; - struct intel_crtc_state *crtc_state; - struct intel_crtc *crtc; - - if (connector_iter->mst_port != connector->mst_port || - connector_iter == connector) - continue; - - conn_iter_state = intel_atomic_get_digital_connector_state(state, - connector_iter); - if (IS_ERR(conn_iter_state)) { - ret = PTR_ERR(conn_iter_state); - break; - } - - if (!conn_iter_state->base.crtc) - continue; - - crtc = to_intel_crtc(conn_iter_state->base.crtc); - crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); - if (IS_ERR(crtc_state)) { - ret = PTR_ERR(crtc_state); - break; - } - - ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); - if (ret) - break; - crtc_state->uapi.mode_changed = true; - } - drm_connector_list_iter_end(&connector_list_iter); - - return ret; -} - -static int -intel_dp_mst_atomic_check(struct drm_connector *connector, - struct drm_atomic_state *_state) -{ - struct intel_atomic_state *state = to_intel_atomic_state(_state); - struct intel_connector *intel_connector = - to_intel_connector(connector); - int ret; - - ret = intel_digital_connector_atomic_check(connector, &state->base); - if (ret) - return ret; - - ret = intel_dp_mst_atomic_topology_check(intel_connector, state); - if (ret) - return ret; - - if (intel_connector_needs_modeset(state, connector)) { - ret = intel_dp_tunnel_atomic_check_state(state, - intel_connector->mst_port, - intel_connector); - if (ret) - return ret; - } - - return drm_dp_atomic_release_time_slots(&state->base, - &intel_connector->mst_port->mst_mgr, - intel_connector->port); -} - -static void clear_act_sent(struct intel_encoder *encoder, - const struct intel_crtc_state *crtc_state) -{ - struct drm_i915_private *i915 = to_i915(encoder->base.dev); - - intel_de_write(i915, dp_tp_status_reg(encoder, crtc_state), - DP_TP_STATUS_ACT_SENT); -} - -static void wait_for_act_sent(struct intel_encoder *encoder, - const struct intel_crtc_state *crtc_state) -{ - struct drm_i915_private *i915 = to_i915(encoder->base.dev); - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_dp *intel_dp = &intel_mst->primary->dp; - - if (intel_de_wait_for_set(i915, dp_tp_status_reg(encoder, crtc_state), - DP_TP_STATUS_ACT_SENT, 1)) - drm_err(&i915->drm, "Timed out waiting for ACT sent\n"); - - drm_dp_check_act_status(&intel_dp->mst_mgr); -} - -static void intel_mst_disable_dp(struct intel_atomic_state *state, - struct intel_encoder *encoder, - const struct intel_crtc_state *old_crtc_state, - const struct drm_connector_state *old_conn_state) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - struct intel_dp *intel_dp = &dig_port->dp; - struct intel_connector *connector = - to_intel_connector(old_conn_state->connector); - struct drm_i915_private *i915 = to_i915(connector->base.dev); - - drm_dbg_kms(&i915->drm, "active links %d\n", - intel_dp->active_mst_links); - - if (intel_dp->active_mst_links == 1) - intel_dp->link_trained = false; - - intel_hdcp_disable(intel_mst->connector); - - intel_dp_sink_disable_decompression(state, connector, old_crtc_state); -} - -static void intel_mst_post_disable_dp(struct intel_atomic_state *state, - struct intel_encoder *encoder, - const struct intel_crtc_state *old_crtc_state, - const struct drm_connector_state *old_conn_state) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - struct intel_dp *intel_dp = &dig_port->dp; - struct intel_connector *connector = - to_intel_connector(old_conn_state->connector); - struct drm_dp_mst_topology_state *old_mst_state = - drm_atomic_get_old_mst_topology_state(&state->base, &intel_dp->mst_mgr); - struct drm_dp_mst_topology_state *new_mst_state = - drm_atomic_get_new_mst_topology_state(&state->base, &intel_dp->mst_mgr); - const struct drm_dp_mst_atomic_payload *old_payload = - drm_atomic_get_mst_payload_state(old_mst_state, connector->port); - struct drm_dp_mst_atomic_payload *new_payload = - drm_atomic_get_mst_payload_state(new_mst_state, connector->port); - struct drm_i915_private *dev_priv = to_i915(connector->base.dev); - struct intel_crtc *pipe_crtc; - bool last_mst_stream; - - intel_dp->active_mst_links--; - last_mst_stream = intel_dp->active_mst_links == 0; - drm_WARN_ON(&dev_priv->drm, - DISPLAY_VER(dev_priv) >= 12 && last_mst_stream && - !intel_dp_mst_is_master_trans(old_crtc_state)); - - for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, pipe_crtc, - intel_crtc_joined_pipe_mask(old_crtc_state)) { - const struct intel_crtc_state *old_pipe_crtc_state = - intel_atomic_get_old_crtc_state(state, pipe_crtc); - - intel_crtc_vblank_off(old_pipe_crtc_state); - } - - intel_disable_transcoder(old_crtc_state); - - drm_dp_remove_payload_part1(&intel_dp->mst_mgr, new_mst_state, new_payload); - - clear_act_sent(encoder, old_crtc_state); - - intel_de_rmw(dev_priv, - TRANS_DDI_FUNC_CTL(dev_priv, old_crtc_state->cpu_transcoder), - TRANS_DDI_DP_VC_PAYLOAD_ALLOC, 0); - - wait_for_act_sent(encoder, old_crtc_state); - - drm_dp_remove_payload_part2(&intel_dp->mst_mgr, new_mst_state, - old_payload, new_payload); - - intel_ddi_disable_transcoder_func(old_crtc_state); - - for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, pipe_crtc, - intel_crtc_joined_pipe_mask(old_crtc_state)) { - const struct intel_crtc_state *old_pipe_crtc_state = - intel_atomic_get_old_crtc_state(state, pipe_crtc); - - intel_dsc_disable(old_pipe_crtc_state); - - if (DISPLAY_VER(dev_priv) >= 9) - skl_scaler_disable(old_pipe_crtc_state); - else - ilk_pfit_disable(old_pipe_crtc_state); - } - - /* - * Power down mst path before disabling the port, otherwise we end - * up getting interrupts from the sink upon detecting link loss. - */ - drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, - false); - - /* - * BSpec 4287: disable DIP after the transcoder is disabled and before - * the transcoder clock select is set to none. - */ - intel_dp_set_infoframes(&dig_port->base, false, - old_crtc_state, NULL); - /* - * From TGL spec: "If multi-stream slave transcoder: Configure - * Transcoder Clock Select to direct no clock to the transcoder" - * - * From older GENs spec: "Configure Transcoder Clock Select to direct - * no clock to the transcoder" - */ - if (DISPLAY_VER(dev_priv) < 12 || !last_mst_stream) - intel_ddi_disable_transcoder_clock(old_crtc_state); - - - intel_mst->connector = NULL; - if (last_mst_stream) - dig_port->base.post_disable(state, &dig_port->base, - old_crtc_state, NULL); - - drm_dbg_kms(&dev_priv->drm, "active links %d\n", - intel_dp->active_mst_links); -} - -static void intel_mst_post_pll_disable_dp(struct intel_atomic_state *state, - struct intel_encoder *encoder, - const struct intel_crtc_state *old_crtc_state, - const struct drm_connector_state *old_conn_state) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - struct intel_dp *intel_dp = &dig_port->dp; - - if (intel_dp->active_mst_links == 0 && - dig_port->base.post_pll_disable) - dig_port->base.post_pll_disable(state, encoder, old_crtc_state, old_conn_state); -} - -static void intel_mst_pre_pll_enable_dp(struct intel_atomic_state *state, - struct intel_encoder *encoder, - const struct intel_crtc_state *pipe_config, - const struct drm_connector_state *conn_state) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - struct intel_dp *intel_dp = &dig_port->dp; - - if (intel_dp->active_mst_links == 0) - dig_port->base.pre_pll_enable(state, &dig_port->base, - pipe_config, NULL); - else - /* - * The port PLL state needs to get updated for secondary - * streams as for the primary stream. - */ - intel_ddi_update_active_dpll(state, &dig_port->base, - to_intel_crtc(pipe_config->uapi.crtc)); -} - -static bool intel_mst_probed_link_params_valid(struct intel_dp *intel_dp, - int link_rate, int lane_count) -{ - return intel_dp->link.mst_probed_rate == link_rate && - intel_dp->link.mst_probed_lane_count == lane_count; -} - -static void intel_mst_set_probed_link_params(struct intel_dp *intel_dp, - int link_rate, int lane_count) -{ - intel_dp->link.mst_probed_rate = link_rate; - intel_dp->link.mst_probed_lane_count = lane_count; -} - -static void intel_mst_reprobe_topology(struct intel_dp *intel_dp, - const struct intel_crtc_state *crtc_state) -{ - if (intel_mst_probed_link_params_valid(intel_dp, - crtc_state->port_clock, crtc_state->lane_count)) - return; - - drm_dp_mst_topology_queue_probe(&intel_dp->mst_mgr); - - intel_mst_set_probed_link_params(intel_dp, - crtc_state->port_clock, crtc_state->lane_count); -} - -static void intel_mst_pre_enable_dp(struct intel_atomic_state *state, - struct intel_encoder *encoder, - const struct intel_crtc_state *pipe_config, - const struct drm_connector_state *conn_state) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - struct intel_dp *intel_dp = &dig_port->dp; - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - struct intel_connector *connector = - to_intel_connector(conn_state->connector); - struct drm_dp_mst_topology_state *mst_state = - drm_atomic_get_new_mst_topology_state(&state->base, &intel_dp->mst_mgr); - int ret; - bool first_mst_stream; - - /* MST encoders are bound to a crtc, not to a connector, - * force the mapping here for get_hw_state. - */ - connector->encoder = encoder; - intel_mst->connector = connector; - first_mst_stream = intel_dp->active_mst_links == 0; - drm_WARN_ON(&dev_priv->drm, - DISPLAY_VER(dev_priv) >= 12 && first_mst_stream && - !intel_dp_mst_is_master_trans(pipe_config)); - - drm_dbg_kms(&dev_priv->drm, "active links %d\n", - intel_dp->active_mst_links); - - if (first_mst_stream) - intel_dp_set_power(intel_dp, DP_SET_POWER_D0); - - drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, true); - - intel_dp_sink_enable_decompression(state, connector, pipe_config); - - if (first_mst_stream) { - dig_port->base.pre_enable(state, &dig_port->base, - pipe_config, NULL); - - intel_mst_reprobe_topology(intel_dp, pipe_config); - } - - intel_dp->active_mst_links++; - - ret = drm_dp_add_payload_part1(&intel_dp->mst_mgr, mst_state, - drm_atomic_get_mst_payload_state(mst_state, connector->port)); - if (ret < 0) - intel_dp_queue_modeset_retry_for_link(state, &dig_port->base, pipe_config); - - /* - * Before Gen 12 this is not done as part of - * dig_port->base.pre_enable() and should be done here. For - * Gen 12+ the step in which this should be done is different for the - * first MST stream, so it's done on the DDI for the first stream and - * here for the following ones. - */ - if (DISPLAY_VER(dev_priv) < 12 || !first_mst_stream) - intel_ddi_enable_transcoder_clock(encoder, pipe_config); - - intel_dsc_dp_pps_write(&dig_port->base, pipe_config); - intel_ddi_set_dp_msa(pipe_config, conn_state); -} - -static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state) -{ - struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); - u32 clear = 0; - u32 set = 0; - - if (!IS_ALDERLAKE_P(i915)) - return; - - if (!IS_DISPLAY_STEP(i915, STEP_D0, STEP_FOREVER)) - return; - - /* Wa_14013163432:adlp */ - if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state)) - set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder); - - /* Wa_14014143976:adlp */ - if (IS_DISPLAY_STEP(i915, STEP_E0, STEP_FOREVER)) { - if (intel_dp_is_uhbr(crtc_state)) - set |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder); - else if (crtc_state->fec_enable) - clear |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder); - - if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state)) - set |= DP_MST_DPT_DPTP_ALIGN_WA(crtc_state->cpu_transcoder); - } - - if (!clear && !set) - return; - - intel_de_rmw(i915, CHICKEN_MISC_3, clear, set); -} - -static void intel_mst_enable_dp(struct intel_atomic_state *state, - struct intel_encoder *encoder, - const struct intel_crtc_state *pipe_config, - const struct drm_connector_state *conn_state) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - struct intel_dp *intel_dp = &dig_port->dp; - struct intel_connector *connector = to_intel_connector(conn_state->connector); - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - struct drm_dp_mst_topology_state *mst_state = - drm_atomic_get_new_mst_topology_state(&state->base, &intel_dp->mst_mgr); - enum transcoder trans = pipe_config->cpu_transcoder; - bool first_mst_stream = intel_dp->active_mst_links == 1; - struct intel_crtc *pipe_crtc; - int ret; - - drm_WARN_ON(&dev_priv->drm, pipe_config->has_pch_encoder); - - if (intel_dp_is_uhbr(pipe_config)) { - const struct drm_display_mode *adjusted_mode = - &pipe_config->hw.adjusted_mode; - u64 crtc_clock_hz = KHz(adjusted_mode->crtc_clock); - - intel_de_write(dev_priv, TRANS_DP2_VFREQHIGH(pipe_config->cpu_transcoder), - TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz >> 24)); - intel_de_write(dev_priv, TRANS_DP2_VFREQLOW(pipe_config->cpu_transcoder), - TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff)); - } - - enable_bs_jitter_was(pipe_config); - - intel_ddi_enable_transcoder_func(encoder, pipe_config); - - clear_act_sent(encoder, pipe_config); - - intel_de_rmw(dev_priv, TRANS_DDI_FUNC_CTL(dev_priv, trans), 0, - TRANS_DDI_DP_VC_PAYLOAD_ALLOC); - - drm_dbg_kms(&dev_priv->drm, "active links %d\n", - intel_dp->active_mst_links); - - wait_for_act_sent(encoder, pipe_config); - - if (first_mst_stream) - intel_ddi_wait_for_fec_status(encoder, pipe_config, true); - - ret = drm_dp_add_payload_part2(&intel_dp->mst_mgr, - drm_atomic_get_mst_payload_state(mst_state, - connector->port)); - if (ret < 0) - intel_dp_queue_modeset_retry_for_link(state, &dig_port->base, pipe_config); - - if (DISPLAY_VER(dev_priv) >= 12) - intel_de_rmw(dev_priv, hsw_chicken_trans_reg(dev_priv, trans), - FECSTALL_DIS_DPTSTREAM_DPTTG, - pipe_config->fec_enable ? FECSTALL_DIS_DPTSTREAM_DPTTG : 0); - - intel_audio_sdp_split_update(pipe_config); - - intel_enable_transcoder(pipe_config); - - for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, pipe_crtc, - intel_crtc_joined_pipe_mask(pipe_config)) { - const struct intel_crtc_state *pipe_crtc_state = - intel_atomic_get_new_crtc_state(state, pipe_crtc); - - intel_crtc_vblank_on(pipe_crtc_state); - } - - intel_hdcp_enable(state, encoder, pipe_config, conn_state); -} - -static bool intel_dp_mst_enc_get_hw_state(struct intel_encoder *encoder, - enum pipe *pipe) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - *pipe = intel_mst->pipe; - if (intel_mst->connector) - return true; - return false; -} - -static void intel_dp_mst_enc_get_config(struct intel_encoder *encoder, - struct intel_crtc_state *pipe_config) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - - dig_port->base.get_config(&dig_port->base, pipe_config); -} - -static bool intel_dp_mst_initial_fastset_check(struct intel_encoder *encoder, - struct intel_crtc_state *crtc_state) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder); - struct intel_digital_port *dig_port = intel_mst->primary; - - return intel_dp_initial_fastset_check(&dig_port->base, crtc_state); -} - -static int intel_dp_mst_get_ddc_modes(struct drm_connector *connector) -{ - struct intel_connector *intel_connector = to_intel_connector(connector); - struct drm_i915_private *i915 = to_i915(intel_connector->base.dev); - struct intel_dp *intel_dp = intel_connector->mst_port; - const struct drm_edid *drm_edid; - int ret; - - if (drm_connector_is_unregistered(connector)) - return intel_connector_update_modes(connector, NULL); - - if (!intel_display_driver_check_access(i915)) - return drm_edid_connector_add_modes(connector); - - drm_edid = drm_dp_mst_edid_read(connector, &intel_dp->mst_mgr, intel_connector->port); - - ret = intel_connector_update_modes(connector, drm_edid); - - drm_edid_free(drm_edid); - - return ret; -} - -static int -intel_dp_mst_connector_late_register(struct drm_connector *connector) -{ - struct intel_connector *intel_connector = to_intel_connector(connector); - int ret; - - ret = drm_dp_mst_connector_late_register(connector, - intel_connector->port); - if (ret < 0) - return ret; - - ret = intel_connector_register(connector); - if (ret < 0) - drm_dp_mst_connector_early_unregister(connector, - intel_connector->port); - - return ret; -} - -static void -intel_dp_mst_connector_early_unregister(struct drm_connector *connector) -{ - struct intel_connector *intel_connector = to_intel_connector(connector); - - intel_connector_unregister(connector); - drm_dp_mst_connector_early_unregister(connector, - intel_connector->port); -} - -static const struct drm_connector_funcs intel_dp_mst_connector_funcs = { - .fill_modes = drm_helper_probe_single_connector_modes, - .atomic_get_property = intel_digital_connector_atomic_get_property, - .atomic_set_property = intel_digital_connector_atomic_set_property, - .late_register = intel_dp_mst_connector_late_register, - .early_unregister = intel_dp_mst_connector_early_unregister, - .destroy = intel_connector_destroy, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, - .atomic_duplicate_state = intel_digital_connector_duplicate_state, -}; - -static int intel_dp_mst_get_modes(struct drm_connector *connector) -{ - return intel_dp_mst_get_ddc_modes(connector); -} - -static int -intel_dp_mst_mode_valid_ctx(struct drm_connector *connector, - struct drm_display_mode *mode, - struct drm_modeset_acquire_ctx *ctx, - enum drm_mode_status *status) -{ - struct drm_i915_private *dev_priv = to_i915(connector->dev); - struct intel_connector *intel_connector = to_intel_connector(connector); - struct intel_dp *intel_dp = intel_connector->mst_port; - struct drm_dp_mst_topology_mgr *mgr = &intel_dp->mst_mgr; - struct drm_dp_mst_port *port = intel_connector->port; - const int min_bpp = 18; - int max_dotclk = to_i915(connector->dev)->display.cdclk.max_dotclk_freq; - int max_rate, mode_rate, max_lanes, max_link_clock; - int ret; - bool dsc = false, joiner = false; - u16 dsc_max_compressed_bpp = 0; - u8 dsc_slice_count = 0; - int target_clock = mode->clock; - - if (drm_connector_is_unregistered(connector)) { - *status = MODE_ERROR; - return 0; - } - - *status = intel_cpu_transcoder_mode_valid(dev_priv, mode); - if (*status != MODE_OK) - return 0; - - if (mode->flags & DRM_MODE_FLAG_DBLCLK) { - *status = MODE_H_ILLEGAL; - return 0; - } - - if (mode->clock < 10000) { - *status = MODE_CLOCK_LOW; - return 0; - } - - max_link_clock = intel_dp_max_link_rate(intel_dp); - max_lanes = intel_dp_max_lane_count(intel_dp); - - max_rate = intel_dp_max_link_data_rate(intel_dp, - max_link_clock, max_lanes); - mode_rate = intel_dp_link_required(mode->clock, min_bpp); - - /* - * TODO: - * - Also check if compression would allow for the mode - * - Calculate the overhead using drm_dp_bw_overhead() / - * drm_dp_bw_channel_coding_efficiency(), similarly to the - * compute config code, as drm_dp_calc_pbn_mode() doesn't - * account with all the overheads. - * - Check here and during compute config the BW reported by - * DFP_Link_Available_Payload_Bandwidth_Number (or the - * corresponding link capabilities of the sink) in case the - * stream is uncompressed for it by the last branch device. - */ - if (intel_dp_need_joiner(intel_dp, intel_connector, - mode->hdisplay, target_clock)) { - joiner = true; - max_dotclk *= 2; - } - - ret = drm_modeset_lock(&mgr->base.lock, ctx); - if (ret) - return ret; - - if (mode_rate > max_rate || mode->clock > max_dotclk || - drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) > port->full_pbn) { - *status = MODE_CLOCK_HIGH; - return 0; - } - - if (intel_dp_has_dsc(intel_connector)) { - /* - * TBD pass the connector BPC, - * for now U8_MAX so that max BPC on that platform would be picked - */ - int pipe_bpp = intel_dp_dsc_compute_max_bpp(intel_connector, U8_MAX); - - if (drm_dp_sink_supports_fec(intel_connector->dp.fec_capability)) { - dsc_max_compressed_bpp = - intel_dp_dsc_get_max_compressed_bpp(dev_priv, - max_link_clock, - max_lanes, - target_clock, - mode->hdisplay, - joiner, - INTEL_OUTPUT_FORMAT_RGB, - pipe_bpp, 64); - dsc_slice_count = - intel_dp_dsc_get_slice_count(intel_connector, - target_clock, - mode->hdisplay, - joiner); - } - - dsc = dsc_max_compressed_bpp && dsc_slice_count; - } - - if (intel_dp_joiner_needs_dsc(dev_priv, joiner) && !dsc) { - *status = MODE_CLOCK_HIGH; - return 0; - } - - if (mode_rate > max_rate && !dsc) { - *status = MODE_CLOCK_HIGH; - return 0; - } - - *status = intel_mode_valid_max_plane_size(dev_priv, mode, joiner); - return 0; -} - -static struct drm_encoder *intel_mst_atomic_best_encoder(struct drm_connector *connector, - struct drm_atomic_state *state) -{ - struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, - connector); - struct intel_connector *intel_connector = to_intel_connector(connector); - struct intel_dp *intel_dp = intel_connector->mst_port; - struct intel_crtc *crtc = to_intel_crtc(connector_state->crtc); - - return &intel_dp->mst_encoders[crtc->pipe]->base.base; -} - -static int -intel_dp_mst_detect(struct drm_connector *connector, - struct drm_modeset_acquire_ctx *ctx, bool force) -{ - struct drm_i915_private *i915 = to_i915(connector->dev); - struct intel_connector *intel_connector = to_intel_connector(connector); - struct intel_dp *intel_dp = intel_connector->mst_port; - - if (!intel_display_device_enabled(i915)) - return connector_status_disconnected; - - if (drm_connector_is_unregistered(connector)) - return connector_status_disconnected; - - if (!intel_display_driver_check_access(i915)) - return connector->status; - - return drm_dp_mst_detect_port(connector, ctx, &intel_dp->mst_mgr, - intel_connector->port); -} - -static const struct drm_connector_helper_funcs intel_dp_mst_connector_helper_funcs = { - .get_modes = intel_dp_mst_get_modes, - .mode_valid_ctx = intel_dp_mst_mode_valid_ctx, - .atomic_best_encoder = intel_mst_atomic_best_encoder, - .atomic_check = intel_dp_mst_atomic_check, - .detect_ctx = intel_dp_mst_detect, -}; - -static void intel_dp_mst_encoder_destroy(struct drm_encoder *encoder) -{ - struct intel_dp_mst_encoder *intel_mst = enc_to_mst(to_intel_encoder(encoder)); - - drm_encoder_cleanup(encoder); - kfree(intel_mst); -} - -static const struct drm_encoder_funcs intel_dp_mst_enc_funcs = { - .destroy = intel_dp_mst_encoder_destroy, -}; - -static bool intel_dp_mst_get_hw_state(struct intel_connector *connector) -{ - if (intel_attached_encoder(connector) && connector->base.state->crtc) { - enum pipe pipe; - if (!intel_attached_encoder(connector)->get_hw_state(intel_attached_encoder(connector), &pipe)) - return false; - return true; - } - return false; -} - -static int intel_dp_mst_add_properties(struct intel_dp *intel_dp, - struct drm_connector *connector, - const char *pathprop) -{ - struct drm_i915_private *i915 = to_i915(connector->dev); - - drm_object_attach_property(&connector->base, - i915->drm.mode_config.path_property, 0); - drm_object_attach_property(&connector->base, - i915->drm.mode_config.tile_property, 0); - - intel_attach_force_audio_property(connector); - intel_attach_broadcast_rgb_property(connector); - - /* - * Reuse the prop from the SST connector because we're - * not allowed to create new props after device registration. - */ - connector->max_bpc_property = - intel_dp->attached_connector->base.max_bpc_property; - if (connector->max_bpc_property) - drm_connector_attach_max_bpc_property(connector, 6, 12); - - return drm_connector_set_path_property(connector, pathprop); -} - -static void -intel_dp_mst_read_decompression_port_dsc_caps(struct intel_dp *intel_dp, - struct intel_connector *connector) -{ - u8 dpcd_caps[DP_RECEIVER_CAP_SIZE]; - - if (!connector->dp.dsc_decompression_aux) - return; - - if (drm_dp_read_dpcd_caps(connector->dp.dsc_decompression_aux, dpcd_caps) < 0) - return; - - intel_dp_get_dsc_sink_cap(dpcd_caps[DP_DPCD_REV], connector); -} - -static bool detect_dsc_hblank_expansion_quirk(const struct intel_connector *connector) -{ - struct drm_i915_private *i915 = to_i915(connector->base.dev); - struct drm_dp_aux *aux = connector->dp.dsc_decompression_aux; - struct drm_dp_desc desc; - u8 dpcd[DP_RECEIVER_CAP_SIZE]; - - if (!aux) - return false; - - /* - * A logical port's OUI (at least for affected sinks) is all 0, so - * instead of that the parent port's OUI is used for identification. - */ - if (drm_dp_mst_port_is_logical(connector->port)) { - aux = drm_dp_mst_aux_for_parent(connector->port); - if (!aux) - aux = &connector->mst_port->aux; - } - - if (drm_dp_read_dpcd_caps(aux, dpcd) < 0) - return false; - - if (drm_dp_read_desc(aux, &desc, drm_dp_is_branch(dpcd)) < 0) - return false; - - if (!drm_dp_has_quirk(&desc, - DP_DPCD_QUIRK_HBLANK_EXPANSION_REQUIRES_DSC)) - return false; - - /* - * UHBR (MST sink) devices requiring this quirk don't advertise the - * HBLANK expansion support. Presuming that they perform HBLANK - * expansion internally, or are affected by this issue on modes with a - * short HBLANK for other reasons. - */ - if (!drm_dp_128b132b_supported(dpcd) && - !(dpcd[DP_RECEIVE_PORT_0_CAP_0] & DP_HBLANK_EXPANSION_CAPABLE)) - return false; - - drm_dbg_kms(&i915->drm, - "[CONNECTOR:%d:%s] DSC HBLANK expansion quirk detected\n", - connector->base.base.id, connector->base.name); - - return true; -} - -static struct drm_connector *intel_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, - struct drm_dp_mst_port *port, - const char *pathprop) -{ - struct intel_dp *intel_dp = container_of(mgr, struct intel_dp, mst_mgr); - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); - struct drm_device *dev = dig_port->base.base.dev; - struct drm_i915_private *dev_priv = to_i915(dev); - struct intel_connector *intel_connector; - struct drm_connector *connector; - enum pipe pipe; - int ret; - - intel_connector = intel_connector_alloc(); - if (!intel_connector) - return NULL; - - intel_connector->get_hw_state = intel_dp_mst_get_hw_state; - intel_connector->sync_state = intel_dp_connector_sync_state; - intel_connector->mst_port = intel_dp; - intel_connector->port = port; - drm_dp_mst_get_port_malloc(port); - - intel_dp_init_modeset_retry_work(intel_connector); - - intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port); - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector); - intel_connector->dp.dsc_hblank_expansion_quirk = - detect_dsc_hblank_expansion_quirk(intel_connector); - - connector = &intel_connector->base; - ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs, - DRM_MODE_CONNECTOR_DisplayPort); - if (ret) { - drm_dp_mst_put_port_malloc(port); - intel_connector_free(intel_connector); - return NULL; - } - - drm_connector_helper_add(connector, &intel_dp_mst_connector_helper_funcs); - - for_each_pipe(dev_priv, pipe) { - struct drm_encoder *enc = - &intel_dp->mst_encoders[pipe]->base.base; - - ret = drm_connector_attach_encoder(&intel_connector->base, enc); - if (ret) - goto err; - } - - ret = intel_dp_mst_add_properties(intel_dp, connector, pathprop); - if (ret) - goto err; - - ret = intel_dp_hdcp_init(dig_port, intel_connector); - if (ret) - drm_dbg_kms(&dev_priv->drm, "[%s:%d] HDCP MST init failed, skipping.\n", - connector->name, connector->base.id); - - return connector; - -err: - drm_connector_cleanup(connector); - return NULL; -} - -static void -intel_dp_mst_poll_hpd_irq(struct drm_dp_mst_topology_mgr *mgr) -{ - struct intel_dp *intel_dp = container_of(mgr, struct intel_dp, mst_mgr); - - intel_hpd_trigger_irq(dp_to_dig_port(intel_dp)); -} - -static const struct drm_dp_mst_topology_cbs mst_cbs = { - .add_connector = intel_dp_add_mst_connector, - .poll_hpd_irq = intel_dp_mst_poll_hpd_irq, -}; - -static struct intel_dp_mst_encoder * -intel_dp_create_fake_mst_encoder(struct intel_digital_port *dig_port, enum pipe pipe) -{ - struct intel_dp_mst_encoder *intel_mst; - struct intel_encoder *intel_encoder; - struct drm_device *dev = dig_port->base.base.dev; - - intel_mst = kzalloc(sizeof(*intel_mst), GFP_KERNEL); - - if (!intel_mst) - return NULL; - - intel_mst->pipe = pipe; - intel_encoder = &intel_mst->base; - intel_mst->primary = dig_port; - - drm_encoder_init(dev, &intel_encoder->base, &intel_dp_mst_enc_funcs, - DRM_MODE_ENCODER_DPMST, "DP-MST %c", pipe_name(pipe)); - - intel_encoder->type = INTEL_OUTPUT_DP_MST; - intel_encoder->power_domain = dig_port->base.power_domain; - intel_encoder->port = dig_port->base.port; - intel_encoder->cloneable = 0; - /* - * This is wrong, but broken userspace uses the intersection - * of possible_crtcs of all the encoders of a given connector - * to figure out which crtcs can drive said connector. What - * should be used instead is the union of possible_crtcs. - * To keep such userspace functioning we must misconfigure - * this to make sure the intersection is not empty :( - */ - intel_encoder->pipe_mask = ~0; - - intel_encoder->compute_config = intel_dp_mst_compute_config; - intel_encoder->compute_config_late = intel_dp_mst_compute_config_late; - intel_encoder->disable = intel_mst_disable_dp; - intel_encoder->post_disable = intel_mst_post_disable_dp; - intel_encoder->post_pll_disable = intel_mst_post_pll_disable_dp; - intel_encoder->update_pipe = intel_ddi_update_pipe; - intel_encoder->pre_pll_enable = intel_mst_pre_pll_enable_dp; - intel_encoder->pre_enable = intel_mst_pre_enable_dp; - intel_encoder->enable = intel_mst_enable_dp; - intel_encoder->audio_enable = intel_audio_codec_enable; - intel_encoder->audio_disable = intel_audio_codec_disable; - intel_encoder->get_hw_state = intel_dp_mst_enc_get_hw_state; - intel_encoder->get_config = intel_dp_mst_enc_get_config; - intel_encoder->initial_fastset_check = intel_dp_mst_initial_fastset_check; - - return intel_mst; - -} - -static bool -intel_dp_create_fake_mst_encoders(struct intel_digital_port *dig_port) -{ - struct intel_dp *intel_dp = &dig_port->dp; - struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); - enum pipe pipe; - - for_each_pipe(dev_priv, pipe) - intel_dp->mst_encoders[pipe] = intel_dp_create_fake_mst_encoder(dig_port, pipe); - return true; -} - -int -intel_dp_mst_encoder_active_links(struct intel_digital_port *dig_port) -{ - return dig_port->dp.active_mst_links; -} - -int -intel_dp_mst_encoder_init(struct intel_digital_port *dig_port, int conn_base_id) -{ - struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); - struct intel_dp *intel_dp = &dig_port->dp; - enum port port = dig_port->base.port; - int ret; - - if (!HAS_DP_MST(i915) || intel_dp_is_edp(intel_dp)) - return 0; - - if (DISPLAY_VER(i915) < 12 && port == PORT_A) - return 0; - - if (DISPLAY_VER(i915) < 11 && port == PORT_E) - return 0; - - intel_dp->mst_mgr.cbs = &mst_cbs; - - /* create encoders */ - intel_dp_create_fake_mst_encoders(dig_port); - ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, &i915->drm, - &intel_dp->aux, 16, 3, conn_base_id); - if (ret) { - intel_dp->mst_mgr.cbs = NULL; - return ret; - } - - return 0; -} - -bool intel_dp_mst_source_support(struct intel_dp *intel_dp) -{ - return intel_dp->mst_mgr.cbs; -} - -void -intel_dp_mst_encoder_cleanup(struct intel_digital_port *dig_port) -{ - struct intel_dp *intel_dp = &dig_port->dp; - - if (!intel_dp_mst_source_support(intel_dp)) - return; - - drm_dp_mst_topology_mgr_destroy(&intel_dp->mst_mgr); - /* encoders will get killed by normal cleanup */ - - intel_dp->mst_mgr.cbs = NULL; -} - -bool intel_dp_mst_is_master_trans(const struct intel_crtc_state *crtc_state) -{ - return crtc_state->mst_master_transcoder == crtc_state->cpu_transcoder; -} - -bool intel_dp_mst_is_slave_trans(const struct intel_crtc_state *crtc_state) -{ - return crtc_state->mst_master_transcoder != INVALID_TRANSCODER && - crtc_state->mst_master_transcoder != crtc_state->cpu_transcoder; -} - -/** - * intel_dp_mst_add_topology_state_for_connector - add MST topology state for a connector - * @state: atomic state - * @connector: connector to add the state for - * @crtc: the CRTC @connector is attached to - * - * Add the MST topology state for @connector to @state. - * - * Returns 0 on success, negative error code on failure. - */ -static int -intel_dp_mst_add_topology_state_for_connector(struct intel_atomic_state *state, - struct intel_connector *connector, - struct intel_crtc *crtc) -{ - struct drm_dp_mst_topology_state *mst_state; - - if (!connector->mst_port) - return 0; - - mst_state = drm_atomic_get_mst_topology_state(&state->base, - &connector->mst_port->mst_mgr); - if (IS_ERR(mst_state)) - return PTR_ERR(mst_state); - - mst_state->pending_crtc_mask |= drm_crtc_mask(&crtc->base); - - return 0; -} - -/** - * intel_dp_mst_add_topology_state_for_crtc - add MST topology state for a CRTC - * @state: atomic state - * @crtc: CRTC to add the state for - * - * Add the MST topology state for @crtc to @state. - * - * Returns 0 on success, negative error code on failure. - */ -int intel_dp_mst_add_topology_state_for_crtc(struct intel_atomic_state *state, - struct intel_crtc *crtc) -{ - struct drm_connector *_connector; - struct drm_connector_state *conn_state; - int i; - - for_each_new_connector_in_state(&state->base, _connector, conn_state, i) { - struct intel_connector *connector = to_intel_connector(_connector); - int ret; - - if (conn_state->crtc != &crtc->base) - continue; - - ret = intel_dp_mst_add_topology_state_for_connector(state, connector, crtc); - if (ret) - return ret; - } - - return 0; -} - -static struct intel_connector * -get_connector_in_state_for_crtc(struct intel_atomic_state *state, - const struct intel_crtc *crtc) -{ - struct drm_connector_state *old_conn_state; - struct drm_connector_state *new_conn_state; - struct drm_connector *_connector; - int i; - - for_each_oldnew_connector_in_state(&state->base, _connector, - old_conn_state, new_conn_state, i) { - struct intel_connector *connector = - to_intel_connector(_connector); - - if (old_conn_state->crtc == &crtc->base || - new_conn_state->crtc == &crtc->base) - return connector; - } - - return NULL; -} - -/** - * intel_dp_mst_crtc_needs_modeset - check if changes in topology need to modeset the given CRTC - * @state: atomic state - * @crtc: CRTC for which to check the modeset requirement - * - * Check if any change in a MST topology requires a forced modeset on @crtc in - * this topology. One such change is enabling/disabling the DSC decompression - * state in the first branch device's UFP DPCD as required by one CRTC, while - * the other @crtc in the same topology is still active, requiring a full modeset - * on @crtc. - */ -bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state, - struct intel_crtc *crtc) -{ - const struct intel_connector *crtc_connector; - const struct drm_connector_state *conn_state; - const struct drm_connector *_connector; - int i; - - if (!intel_crtc_has_type(intel_atomic_get_new_crtc_state(state, crtc), - INTEL_OUTPUT_DP_MST)) - return false; - - crtc_connector = get_connector_in_state_for_crtc(state, crtc); - - if (!crtc_connector) - /* None of the connectors in the topology needs modeset */ - return false; - - for_each_new_connector_in_state(&state->base, _connector, conn_state, i) { - const struct intel_connector *connector = - to_intel_connector(_connector); - const struct intel_crtc_state *new_crtc_state; - const struct intel_crtc_state *old_crtc_state; - struct intel_crtc *crtc_iter; - - if (connector->mst_port != crtc_connector->mst_port || - !conn_state->crtc) - continue; - - crtc_iter = to_intel_crtc(conn_state->crtc); - - new_crtc_state = intel_atomic_get_new_crtc_state(state, crtc_iter); - old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc_iter); - - if (!intel_crtc_needs_modeset(new_crtc_state)) - continue; - - if (old_crtc_state->dsc.compression_enable == - new_crtc_state->dsc.compression_enable) - continue; - /* - * Toggling the decompression flag because of this stream in - * the first downstream branch device's UFP DPCD may reset the - * whole branch device. To avoid the reset while other streams - * are also active modeset the whole MST topology in this - * case. - */ - if (connector->dp.dsc_decompression_aux == - &connector->mst_port->aux) - return true; - } - - return false; -} - -<<<<<<< -======= -/** - * intel_dp_mst_prepare_probe - Prepare an MST link for topology probing - * @intel_dp: DP port object - * - * Prepare an MST link for topology probing, programming the target - * link parameters to DPCD. This step is a requirement of the enumaration - * of path resources during probing. - */ -void intel_dp_mst_prepare_probe(struct intel_dp *intel_dp) -{ - int link_rate = intel_dp_max_link_rate(intel_dp); - int lane_count = intel_dp_max_lane_count(intel_dp); - u8 rate_select; - u8 link_bw; - - if (intel_dp->link_trained) - return; - - if (intel_mst_probed_link_params_valid(intel_dp, link_rate, lane_count)) - return; - - intel_dp_compute_rate(intel_dp, link_rate, &link_bw, &rate_select); - - intel_dp_link_training_set_mode(intel_dp, link_rate, false); - intel_dp_link_training_set_bw(intel_dp, link_bw, rate_select, lane_count, - drm_dp_enhanced_frame_cap(intel_dp->dpcd)); - - intel_mst_set_probed_link_params(intel_dp, link_rate, lane_count); -} - ->>>>>>> -/* - * intel_dp_mst_verify_dpcd_state - verify the MST SW enabled state wrt. the DPCD - * @intel_dp: DP port object - * - * Verify if @intel_dp's MST enabled SW state matches the corresponding DPCD - * state. A long HPD pulse - not long enough to be detected as a disconnected - * state - could've reset the DPCD state, which requires tearing - * down/recreating the MST topology. - * - * Returns %true if the SW MST enabled and DPCD states match, %false - * otherwise. - */ -bool intel_dp_mst_verify_dpcd_state(struct intel_dp *intel_dp) -{ - struct intel_display *display = to_intel_display(intel_dp); - struct intel_connector *connector = intel_dp->attached_connector; - struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); - struct intel_encoder *encoder = &dig_port->base; - int ret; - u8 val; - - if (!intel_dp->is_mst) - return true; - - ret = drm_dp_dpcd_readb(intel_dp->mst_mgr.aux, DP_MSTM_CTRL, &val); - - /* Adjust the expected register value for SST + SideBand. */ - if (ret < 0 || val != (DP_MST_EN | DP_UP_REQ_EN | DP_UPSTREAM_IS_SRC)) { - drm_dbg_kms(display->drm, - "[CONNECTOR:%d:%s][ENCODER:%d:%s] MST mode got reset, removing topology (ret=%d, ctrl=0x%02x)\n", - connector->base.base.id, connector->base.name, - encoder->base.base.id, encoder->base.name, - ret, val); - - return false; - } - - return true; -} |