diff options
Diffstat (limited to 'include/net/cfg80211.h')
-rw-r--r-- | include/net/cfg80211.h | 206 |
1 files changed, 195 insertions, 11 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8fb5be3ca0ca..ff45c3e1abff 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -247,6 +247,19 @@ struct ieee80211_rate { }; /** + * struct ieee80211_he_obss_pd - AP settings for spatial reuse + * + * @enable: is the feature enabled. + * @min_offset: minimal tx power offset an associated station shall use + * @max_offset: maximum tx power offset an associated station shall use + */ +struct ieee80211_he_obss_pd { + bool enable; + u8 min_offset; + u8 max_offset; +}; + +/** * struct ieee80211_sta_ht_cap - STA's HT capabilities * * This structure describes most essential parameters needed @@ -318,6 +331,60 @@ struct ieee80211_sband_iftype_data { }; /** + * enum ieee80211_edmg_bw_config - allowed channel bandwidth configurations + * + * @IEEE80211_EDMG_BW_CONFIG_4: 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_5: 2.16GHz and 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_6: 2.16GHz, 4.32GHz and 6.48GHz + * @IEEE80211_EDMG_BW_CONFIG_7: 2.16GHz, 4.32GHz, 6.48GHz and 8.64GHz + * @IEEE80211_EDMG_BW_CONFIG_8: 2.16GHz and 2.16GHz + 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_9: 2.16GHz, 4.32GHz and 2.16GHz + 2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_10: 2.16GHz, 4.32GHz, 6.48GHz and 2.16GHz+2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_11: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz and + * 2.16GHz+2.16GHz + * @IEEE80211_EDMG_BW_CONFIG_12: 2.16GHz, 2.16GHz + 2.16GHz and + * 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_13: 2.16GHz, 4.32GHz, 2.16GHz + 2.16GHz and + * 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_14: 2.16GHz, 4.32GHz, 6.48GHz, 2.16GHz + 2.16GHz + * and 4.32GHz + 4.32GHz + * @IEEE80211_EDMG_BW_CONFIG_15: 2.16GHz, 4.32GHz, 6.48GHz, 8.64GHz, + * 2.16GHz + 2.16GHz and 4.32GHz + 4.32GHz + */ +enum ieee80211_edmg_bw_config { + IEEE80211_EDMG_BW_CONFIG_4 = 4, + IEEE80211_EDMG_BW_CONFIG_5 = 5, + IEEE80211_EDMG_BW_CONFIG_6 = 6, + IEEE80211_EDMG_BW_CONFIG_7 = 7, + IEEE80211_EDMG_BW_CONFIG_8 = 8, + IEEE80211_EDMG_BW_CONFIG_9 = 9, + IEEE80211_EDMG_BW_CONFIG_10 = 10, + IEEE80211_EDMG_BW_CONFIG_11 = 11, + IEEE80211_EDMG_BW_CONFIG_12 = 12, + IEEE80211_EDMG_BW_CONFIG_13 = 13, + IEEE80211_EDMG_BW_CONFIG_14 = 14, + IEEE80211_EDMG_BW_CONFIG_15 = 15, +}; + +/** + * struct ieee80211_edmg - EDMG configuration + * + * This structure describes most essential parameters needed + * to describe 802.11ay EDMG configuration + * + * @channels: bitmap that indicates the 2.16 GHz channel(s) + * that are allowed to be used for transmissions. + * Bit 0 indicates channel 1, bit 1 indicates channel 2, etc. + * Set to 0 indicate EDMG not supported. + * @bw_config: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations + */ +struct ieee80211_edmg { + u8 channels; + enum ieee80211_edmg_bw_config bw_config; +}; + +/** * struct ieee80211_supported_band - frequency band definition * * This structure describes a frequency band a wiphy @@ -333,6 +400,7 @@ struct ieee80211_sband_iftype_data { * @n_bitrates: Number of bitrates in @bitrates * @ht_cap: HT capabilities in this band * @vht_cap: VHT capabilities in this band + * @edmg_cap: EDMG capabilities in this band * @n_iftype_data: number of iftype data entries * @iftype_data: interface type data entries. Note that the bits in * @types_mask inside this structure cannot overlap (i.e. only @@ -347,6 +415,7 @@ struct ieee80211_supported_band { int n_bitrates; struct ieee80211_sta_ht_cap ht_cap; struct ieee80211_sta_vht_cap vht_cap; + struct ieee80211_edmg edmg_cap; u16 n_iftype_data; const struct ieee80211_sband_iftype_data *iftype_data; }; @@ -379,16 +448,18 @@ ieee80211_get_sband_iftype_data(const struct ieee80211_supported_band *sband, } /** - * ieee80211_get_he_sta_cap - return HE capabilities for an sband's STA - * @sband: the sband to search for the STA on + * ieee80211_get_he_iftype_cap - return HE capabilities for an sband's iftype + * @sband: the sband to search for the iftype on + * @iftype: enum nl80211_iftype * * Return: pointer to the struct ieee80211_sta_he_cap, or NULL is none found */ static inline const struct ieee80211_sta_he_cap * -ieee80211_get_he_sta_cap(const struct ieee80211_supported_band *sband) +ieee80211_get_he_iftype_cap(const struct ieee80211_supported_band *sband, + u8 iftype) { const struct ieee80211_sband_iftype_data *data = - ieee80211_get_sband_iftype_data(sband, NL80211_IFTYPE_STATION); + ieee80211_get_sband_iftype_data(sband, iftype); if (data && data->he_cap.has_he) return &data->he_cap; @@ -397,6 +468,18 @@ ieee80211_get_he_sta_cap(const struct ieee80211_supported_band *sband) } /** + * ieee80211_get_he_sta_cap - return HE capabilities for an sband's STA + * @sband: the sband to search for the STA on + * + * Return: pointer to the struct ieee80211_sta_he_cap, or NULL is none found + */ +static inline const struct ieee80211_sta_he_cap * +ieee80211_get_he_sta_cap(const struct ieee80211_supported_band *sband) +{ + return ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_STATION); +} + +/** * wiphy_read_of_freq_limits - read frequency limits from device tree * * @wiphy: the wireless device to get extra limits for @@ -500,12 +583,17 @@ struct key_params { * @center_freq1: center frequency of first segment * @center_freq2: center frequency of second segment * (only with 80+80 MHz) + * @edmg: define the EDMG channels configuration. + * If edmg is requested (i.e. the .channels member is non-zero), + * chan will define the primary channel and all other + * parameters are ignored. */ struct cfg80211_chan_def { struct ieee80211_channel *chan; enum nl80211_chan_width width; u32 center_freq1; u32 center_freq2; + struct ieee80211_edmg edmg; }; /** @@ -564,6 +652,19 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, } /** + * cfg80211_chandef_is_edmg - check if chandef represents an EDMG channel + * + * @chandef: the channel definition + * + * Return: %true if EDMG defined, %false otherwise. + */ +static inline bool +cfg80211_chandef_is_edmg(const struct cfg80211_chan_def *chandef) +{ + return chandef->edmg.channels || chandef->edmg.bw_config; +} + +/** * cfg80211_chandef_compatible - check if two channel definitions are compatible * @chandef1: first channel definition * @chandef2: second channel definition @@ -667,6 +768,7 @@ ieee80211_chandef_max_power(struct cfg80211_chan_def *chandef) * @SURVEY_INFO_TIME_RX: receive time was filled in * @SURVEY_INFO_TIME_TX: transmit time was filled in * @SURVEY_INFO_TIME_SCAN: scan time was filled in + * @SURVEY_INFO_TIME_BSS_RX: local BSS receive time was filled in * * Used by the driver to indicate which info in &struct survey_info * it has filled in during the get_survey(). @@ -680,6 +782,7 @@ enum survey_info_flags { SURVEY_INFO_TIME_RX = BIT(5), SURVEY_INFO_TIME_TX = BIT(6), SURVEY_INFO_TIME_SCAN = BIT(7), + SURVEY_INFO_TIME_BSS_RX = BIT(8), }; /** @@ -696,6 +799,7 @@ enum survey_info_flags { * @time_rx: amount of time the radio spent receiving data * @time_tx: amount of time the radio spent transmitting data * @time_scan: amount of time the radio spent for scanning + * @time_bss_rx: amount of time the radio spent receiving data on a local BSS * * Used by dump_survey() to report back per-channel survey information. * @@ -710,6 +814,7 @@ struct survey_info { u64 time_rx; u64 time_tx; u64 time_scan; + u64 time_bss_rx; u32 filled; s8 noise; }; @@ -739,6 +844,9 @@ struct survey_info { * CFG80211_MAX_WEP_KEYS WEP keys * @wep_tx_key: key index (0..3) of the default TX static WEP key * @psk: PSK (for devices supporting 4-way-handshake offload) + * @sae_pwd: password for SAE authentication (for devices supporting SAE + * offload) + * @sae_pwd_len: length of SAE password (for devices supporting SAE offload) */ struct cfg80211_crypto_settings { u32 wpa_versions; @@ -754,6 +862,8 @@ struct cfg80211_crypto_settings { struct key_params *wep_keys; int wep_tx_key; const u8 *psk; + const u8 *sae_pwd; + u8 sae_pwd_len; }; /** @@ -875,7 +985,9 @@ enum cfg80211_ap_settings_flags { * @he_cap: HE capabilities (or %NULL if HE isn't enabled) * @ht_required: stations must support HT * @vht_required: stations must support VHT + * @twt_responder: Enable Target Wait Time * @flags: flags, as defined in enum cfg80211_ap_settings_flags + * @he_obss_pd: OBSS Packet Detection settings */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -901,7 +1013,9 @@ struct cfg80211_ap_settings { const struct ieee80211_vht_cap *vht_cap; const struct ieee80211_he_cap_elem *he_cap; bool ht_required, vht_required; + bool twt_responder; u32 flags; + struct ieee80211_he_obss_pd he_obss_pd; }; /** @@ -1141,15 +1255,17 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval - * @RATE_INFO_FLAGS_60G: 60GHz MCS + * @RATE_INFO_FLAGS_DMG: 60GHz MCS * @RATE_INFO_FLAGS_HE_MCS: HE MCS information + * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode */ enum rate_info_flags { RATE_INFO_FLAGS_MCS = BIT(0), RATE_INFO_FLAGS_VHT_MCS = BIT(1), RATE_INFO_FLAGS_SHORT_GI = BIT(2), - RATE_INFO_FLAGS_60G = BIT(3), + RATE_INFO_FLAGS_DMG = BIT(3), RATE_INFO_FLAGS_HE_MCS = BIT(4), + RATE_INFO_FLAGS_EDMG = BIT(5), }; /** @@ -1189,6 +1305,7 @@ enum rate_info_bw { * @he_dcm: HE DCM value * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc, * only valid if bw is %RATE_INFO_BW_HE_RU) + * @n_bonded_ch: In case of EDMG the number of bonded channels (1-4) */ struct rate_info { u8 flags; @@ -1199,6 +1316,7 @@ struct rate_info { u8 he_gi; u8 he_dcm; u8 he_ru_alloc; + u8 n_bonded_ch; }; /** @@ -1294,6 +1412,7 @@ struct cfg80211_tid_stats { * indicate the relevant values in this struct for them * @connected_time: time(in secs) since a station is last connected * @inactive_time: time since last station activity (tx/rx) in milliseconds + * @assoc_at: bootime (ns) of the last association * @rx_bytes: bytes (size of MPDUs) received from this station * @tx_bytes: bytes (size of MPDUs) transmitted to this station * @llid: mesh local link id @@ -1354,6 +1473,7 @@ struct station_info { u64 filled; u32 connected_time; u32 inactive_time; + u64 assoc_at; u64 rx_bytes; u64 tx_bytes; u16 llid; @@ -2007,7 +2127,7 @@ enum cfg80211_signal_type { * received by the device (not just by the host, in case it was * buffered on the device) and be accurate to about 10ms. * If the frame isn't buffered, just passing the return value of - * ktime_get_boot_ns() is likely appropriate. + * ktime_get_boottime_ns() is likely appropriate. * @parent_tsf: the time at the start of reception of the first octet of the * timestamp field of the frame. The time is the TSF of the BSS specified * by %parent_bssid. @@ -2400,6 +2520,9 @@ struct cfg80211_bss_selection { * @fils_erp_rrk_len: Length of @fils_erp_rrk in octets. * @want_1x: indicates user-space supports and wants to use 802.1X driver * offload of 4-way handshake. + * @edmg: define the EDMG channels. + * This may specify multiple channels and bonding options for the driver + * to choose from, based on BSS configuration. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; @@ -2433,6 +2556,7 @@ struct cfg80211_connect_params { const u8 *fils_erp_rrk; size_t fils_erp_rrk_len; bool want_1x; + struct ieee80211_edmg edmg; }; /** @@ -4149,6 +4273,8 @@ struct sta_opmode_info { u8 rx_nss; }; +#define VENDOR_CMD_RAW_DATA ((const struct nla_policy *)(long)(-ENODATA)) + /** * struct wiphy_vendor_command - vendor command definition * @info: vendor command identifying information, as used in nl80211 @@ -4159,6 +4285,10 @@ struct sta_opmode_info { * @dumpit: dump callback, for transferring bigger/multiple items. The * @storage points to cb->args[5], ie. is preserved over the multiple * dumpit calls. + * @policy: policy pointer for attributes within %NL80211_ATTR_VENDOR_DATA. + * Set this to %VENDOR_CMD_RAW_DATA if no policy can be given and the + * attribute is just raw data (e.g. a firmware command). + * @maxattr: highest attribute number in policy * It's recommended to not have the same sub command with both @doit and * @dumpit, so that userspace can assume certain ones are get and others * are used with dump requests. @@ -4171,6 +4301,8 @@ struct wiphy_vendor_command { int (*dumpit)(struct wiphy *wiphy, struct wireless_dev *wdev, struct sk_buff *skb, const void *data, int data_len, unsigned long *storage); + const struct nla_policy *policy; + unsigned int maxattr; }; /** @@ -5719,6 +5851,26 @@ void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); */ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); +/** + * cfg80211_bss_iter - iterate all BSS entries + * + * This function iterates over the BSS entries associated with the given wiphy + * and calls the callback for the iterated BSS. The iterator function is not + * allowed to call functions that might modify the internal state of the BSS DB. + * + * @wiphy: the wiphy + * @chandef: if given, the iterator function will be called only if the channel + * of the currently iterated BSS is a subset of the given channel. + * @iter: the iterator function to call + * @iter_data: an argument to the iterator function + */ +void cfg80211_bss_iter(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, + void (*iter)(struct wiphy *wiphy, + struct cfg80211_bss *bss, + void *data), + void *iter_data); + static inline enum nl80211_bss_scan_width cfg80211_chandef_to_scan_width(const struct cfg80211_chan_def *chandef) { @@ -6229,8 +6381,11 @@ struct cfg80211_fils_resp_params { * case. * @bssid: The BSSID of the AP (may be %NULL) * @bss: Entry of bss to which STA got connected to, can be obtained through - * cfg80211_get_bss() (may be %NULL). Only one parameter among @bssid and - * @bss needs to be specified. + * cfg80211_get_bss() (may be %NULL). But it is recommended to store the + * bss from the connect_request and hold a reference to it and return + * through this param to avoid a warning if the bss is expired during the + * connection, esp. for those drivers implementing connect op. + * Only one parameter among @bssid and @bss needs to be specified. * @req_ie: Association request IEs (may be %NULL) * @req_ie_len: Association request IEs length * @resp_ie: Association response IEs (may be %NULL) @@ -6278,8 +6433,12 @@ void cfg80211_connect_done(struct net_device *dev, * * @dev: network device * @bssid: the BSSID of the AP - * @bss: entry of bss to which STA got connected to, can be obtained - * through cfg80211_get_bss (may be %NULL) + * @bss: Entry of bss to which STA got connected to, can be obtained through + * cfg80211_get_bss() (may be %NULL). But it is recommended to store the + * bss from the connect_request and hold a reference to it and return + * through this param to avoid a warning if the bss is expired during the + * connection, esp. for those drivers implementing connect op. + * Only one parameter among @bssid and @bss needs to be specified. * @req_ie: association request IEs (maybe be %NULL) * @req_ie_len: association request IEs length * @resp_ie: association response IEs (may be %NULL) @@ -6490,6 +6649,16 @@ void cfg80211_remain_on_channel_expired(struct wireless_dev *wdev, u64 cookie, gfp_t gfp); /** + * cfg80211_tx_mgmt_expired - tx_mgmt duration expired + * @wdev: wireless device + * @cookie: the requested cookie + * @chan: The current channel (from tx_mgmt request) + * @gfp: allocation flags + */ +void cfg80211_tx_mgmt_expired(struct wireless_dev *wdev, u64 cookie, + struct ieee80211_channel *chan, gfp_t gfp); + +/** * cfg80211_sinfo_alloc_tid_stats - allocate per-tid statistics. * * @sinfo: the station information @@ -7254,6 +7423,21 @@ void cfg80211_pmsr_complete(struct wireless_dev *wdev, struct cfg80211_pmsr_request *req, gfp_t gfp); +/** + * cfg80211_iftype_allowed - check whether the interface can be allowed + * @wiphy: the wiphy + * @iftype: interface type + * @is_4addr: use_4addr flag, must be '0' when check_swif is '1' + * @check_swif: check iftype against software interfaces + * + * Check whether the interface is allowed to operate; additionally, this API + * can be used to check iftype against the software interfaces when + * check_swif is '1'. + */ +bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype, + bool is_4addr, u8 check_swif); + + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ |