diff options
Diffstat (limited to 'include/linux/regmap.h')
-rw-r--r-- | include/linux/regmap.h | 141 |
1 files changed, 109 insertions, 32 deletions
diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 8952fa3d0d59..7cf2157134ac 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -1336,6 +1336,22 @@ static inline int regmap_field_update_bits(struct regmap_field *field, NULL, false, false); } +static inline int regmap_field_set_bits(struct regmap_field *field, + unsigned int bits) +{ + return regmap_field_update_bits_base(field, bits, bits, NULL, false, + false); +} + +static inline int regmap_field_clear_bits(struct regmap_field *field, + unsigned int bits) +{ + return regmap_field_update_bits_base(field, bits, 0, NULL, false, + false); +} + +int regmap_field_test_bits(struct regmap_field *field, unsigned int bits); + static inline int regmap_field_force_update_bits(struct regmap_field *field, unsigned int mask, unsigned int val) @@ -1424,6 +1440,8 @@ struct regmap_irq_sub_irq_map { unsigned int *offset; }; +struct regmap_irq_chip_data; + /** * struct regmap_irq_chip - Description of a generic regmap irq_chip. * @@ -1451,32 +1469,50 @@ struct regmap_irq_sub_irq_map { * main_status set. * * @status_base: Base status register address. - * @mask_base: Base mask register address. - * @mask_writeonly: Base mask register is write only. - * @unmask_base: Base unmask register address. for chips who have - * separate mask and unmask registers + * @mask_base: Base mask register address. Mask bits are set to 1 when an + * interrupt is masked, 0 when unmasked. + * @unmask_base: Base unmask register address. Unmask bits are set to 1 when + * an interrupt is unmasked and 0 when masked. * @ack_base: Base ack address. If zero then the chip is clear on read. * Using zero value is possible with @use_ack bit. * @wake_base: Base address for wake enables. If zero unsupported. - * @type_base: Base address for irq type. If zero unsupported. - * @virt_reg_base: Base addresses for extra config regs. + * @type_base: Base address for irq type. If zero unsupported. Deprecated, + * use @config_base instead. + * @virt_reg_base: Base addresses for extra config regs. Deprecated, use + * @config_base instead. + * @config_base: Base address for IRQ type config regs. If null unsupported. * @irq_reg_stride: Stride to use for chips where registers are not contiguous. * @init_ack_masked: Ack all masked interrupts once during initalization. * @mask_invert: Inverted mask register: cleared bits are masked out. + * Deprecated; prefer describing an inverted mask register as + * an unmask register. + * @mask_unmask_non_inverted: Controls mask bit inversion for chips that set + * both @mask_base and @unmask_base. If false, mask and unmask bits are + * inverted (which is deprecated behavior); if true, bits will not be + * inverted and the registers keep their normal behavior. Note that if + * you use only one of @mask_base or @unmask_base, this flag has no + * effect and is unnecessary. Any new drivers that set both @mask_base + * and @unmask_base should set this to true to avoid relying on the + * deprecated behavior. * @use_ack: Use @ack register even if it is zero. * @ack_invert: Inverted ack register: cleared bits for ack. * @clear_ack: Use this to set 1 and 0 or vice-versa to clear interrupts. * @wake_invert: Inverted wake register: cleared bits are wake enabled. - * @type_invert: Invert the type flags. - * @type_in_mask: Use the mask registers for controlling irq type. For - * interrupts defining type_rising/falling_mask use mask_base - * for edge configuration and never update bits in type_base. + * @type_invert: Invert the type flags. Deprecated, use config registers + * instead. + * @type_in_mask: Use the mask registers for controlling irq type. Use this if + * the hardware provides separate bits for rising/falling edge + * or low/high level interrupts and they should be combined into + * a single logical interrupt. Use &struct regmap_irq_type data + * to define the mask bit for each irq type. * @clear_on_unmask: For chips with interrupts cleared on read: read the status * registers before unmasking interrupts to clear any bits * set when they were masked. * @not_fixed_stride: Used when chip peripherals are not laid out with fixed - * stride. Must be used with sub_reg_offsets containing the - * offsets to each peripheral. + * stride. Must be used with sub_reg_offsets containing the + * offsets to each peripheral. Deprecated; the same thing + * can be accomplished with a @get_irq_reg callback, without + * the need for a @sub_reg_offsets table. * @status_invert: Inverted status register: cleared bits are active interrupts. * @runtime_pm: Hold a runtime PM lock on the device when accessing it. * @@ -1484,17 +1520,28 @@ struct regmap_irq_sub_irq_map { * @irqs: Descriptors for individual IRQs. Interrupt numbers are * assigned based on the index in the array of the interrupt. * @num_irqs: Number of descriptors. - * @num_type_reg: Number of type registers. + * @num_type_reg: Number of type registers. Deprecated, use config registers + * instead. * @num_virt_regs: Number of non-standard irq configuration registers. - * If zero unsupported. - * @type_reg_stride: Stride to use for chips where type registers are not - * contiguous. + * If zero unsupported. Deprecated, use config registers + * instead. + * @num_config_bases: Number of config base registers. + * @num_config_regs: Number of config registers for each config base register. * @handle_pre_irq: Driver specific callback to handle interrupt from device * before regmap_irq_handler process the interrupts. * @handle_post_irq: Driver specific callback to handle interrupt from device * after handling the interrupts in regmap_irq_handler(). * @set_type_virt: Driver specific callback to extend regmap_irq_set_type() - * and configure virt regs. + * and configure virt regs. Deprecated, use @set_type_config + * callback and config registers instead. + * @set_type_config: Callback used for configuring irq types. + * @get_irq_reg: Callback for mapping (base register, index) pairs to register + * addresses. The base register will be one of @status_base, + * @mask_base, etc., @main_status, or any of @config_base. + * The index will be in the range [0, num_main_regs[ for the + * main status base, [0, num_type_settings[ for any config + * register base, and [0, num_regs[ for any other base. + * If unspecified then regmap_irq_get_irq_reg_linear() is used. * @irq_drv_data: Driver specific IRQ data which is passed as parameter when * driver specific pre/post interrupt handler is called. * @@ -1517,20 +1564,21 @@ struct regmap_irq_chip { unsigned int wake_base; unsigned int type_base; unsigned int *virt_reg_base; + const unsigned int *config_base; unsigned int irq_reg_stride; - bool mask_writeonly:1; - bool init_ack_masked:1; - bool mask_invert:1; - bool use_ack:1; - bool ack_invert:1; - bool clear_ack:1; - bool wake_invert:1; - bool runtime_pm:1; - bool type_invert:1; - bool type_in_mask:1; - bool clear_on_unmask:1; - bool not_fixed_stride:1; - bool status_invert:1; + unsigned int init_ack_masked:1; + unsigned int mask_invert:1; + unsigned int mask_unmask_non_inverted:1; + unsigned int use_ack:1; + unsigned int ack_invert:1; + unsigned int clear_ack:1; + unsigned int wake_invert:1; + unsigned int runtime_pm:1; + unsigned int type_invert:1; + unsigned int type_in_mask:1; + unsigned int clear_on_unmask:1; + unsigned int not_fixed_stride:1; + unsigned int status_invert:1; int num_regs; @@ -1539,16 +1587,24 @@ struct regmap_irq_chip { int num_type_reg; int num_virt_regs; - unsigned int type_reg_stride; + int num_config_bases; + int num_config_regs; int (*handle_pre_irq)(void *irq_drv_data); int (*handle_post_irq)(void *irq_drv_data); int (*set_type_virt)(unsigned int **buf, unsigned int type, unsigned long hwirq, int reg); + int (*set_type_config)(unsigned int **buf, unsigned int type, + const struct regmap_irq *irq_data, int idx); + unsigned int (*get_irq_reg)(struct regmap_irq_chip_data *data, + unsigned int base, int index); void *irq_drv_data; }; -struct regmap_irq_chip_data; +unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data, + unsigned int base, int index); +int regmap_irq_set_type_config_simple(unsigned int **buf, unsigned int type, + const struct regmap_irq *irq_data, int idx); int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, int irq_base, const struct regmap_irq_chip *chip, @@ -1769,6 +1825,27 @@ regmap_field_force_update_bits(struct regmap_field *field, return -EINVAL; } +static inline int regmap_field_set_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_clear_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_field_test_bits(struct regmap_field *field, + unsigned int bits) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regmap_fields_write(struct regmap_field *field, unsigned int id, unsigned int val) { |