summaryrefslogtreecommitdiff
path: root/include/asm-ppc
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-ppc')
-rw-r--r--include/asm-ppc/8xx_immap.h564
-rw-r--r--include/asm-ppc/amigayle.h1
-rw-r--r--include/asm-ppc/amipcmcia.h1
-rw-r--r--include/asm-ppc/bootinfo.h46
-rw-r--r--include/asm-ppc/bootx.h135
-rw-r--r--include/asm-ppc/btext.h34
-rw-r--r--include/asm-ppc/cpm1.h688
-rw-r--r--include/asm-ppc/cpm2.h1248
-rw-r--r--include/asm-ppc/delay.h66
-rw-r--r--include/asm-ppc/device.h7
-rw-r--r--include/asm-ppc/floppy.h178
-rw-r--r--include/asm-ppc/fs_pd.h36
-rw-r--r--include/asm-ppc/gg2.h61
-rw-r--r--include/asm-ppc/gt64260.h322
-rw-r--r--include/asm-ppc/gt64260_defs.h1010
-rw-r--r--include/asm-ppc/harrier.h43
-rw-r--r--include/asm-ppc/hawk.h32
-rw-r--r--include/asm-ppc/hawk_defs.h76
-rw-r--r--include/asm-ppc/highmem.h135
-rw-r--r--include/asm-ppc/hydra.h102
-rw-r--r--include/asm-ppc/ibm403.h478
-rw-r--r--include/asm-ppc/ibm405.h299
-rw-r--r--include/asm-ppc/ibm44x.h674
-rw-r--r--include/asm-ppc/ibm4xx.h124
-rw-r--r--include/asm-ppc/ibm_ocp.h204
-rw-r--r--include/asm-ppc/ibm_ocp_pci.h32
-rw-r--r--include/asm-ppc/immap_cpm2.h648
-rw-r--r--include/asm-ppc/io.h502
-rw-r--r--include/asm-ppc/irq_regs.h1
-rw-r--r--include/asm-ppc/kdebug.h1
-rw-r--r--include/asm-ppc/kgdb.h57
-rw-r--r--include/asm-ppc/m8260_pci.h187
-rw-r--r--include/asm-ppc/machdep.h178
-rw-r--r--include/asm-ppc/md.h15
-rw-r--r--include/asm-ppc/mk48t59.h27
-rw-r--r--include/asm-ppc/mmu.h444
-rw-r--r--include/asm-ppc/mmu_context.h198
-rw-r--r--include/asm-ppc/mpc10x.h180
-rw-r--r--include/asm-ppc/mpc52xx.h450
-rw-r--r--include/asm-ppc/mpc52xx_psc.h200
-rw-r--r--include/asm-ppc/mpc8260.h98
-rw-r--r--include/asm-ppc/mpc8260_pci9.h47
-rw-r--r--include/asm-ppc/mpc8xx.h122
-rw-r--r--include/asm-ppc/mv64x60.h353
-rw-r--r--include/asm-ppc/mv64x60_defs.h976
-rw-r--r--include/asm-ppc/ocp.h204
-rw-r--r--include/asm-ppc/ocp_ids.h73
-rw-r--r--include/asm-ppc/open_pic.h98
-rw-r--r--include/asm-ppc/page.h140
-rw-r--r--include/asm-ppc/pc_serial.h42
-rw-r--r--include/asm-ppc/pci-bridge.h151
-rw-r--r--include/asm-ppc/pci.h156
-rw-r--r--include/asm-ppc/pgalloc.h45
-rw-r--r--include/asm-ppc/pgtable.h771
-rw-r--r--include/asm-ppc/pnp.h645
-rw-r--r--include/asm-ppc/ppc4xx_dma.h579
-rw-r--r--include/asm-ppc/ppc4xx_pic.h52
-rw-r--r--include/asm-ppc/ppc_sys.h106
-rw-r--r--include/asm-ppc/ppcboot.h100
-rw-r--r--include/asm-ppc/prep_nvram.h153
-rw-r--r--include/asm-ppc/prom.h40
-rw-r--r--include/asm-ppc/raven.h35
-rw-r--r--include/asm-ppc/reg_booke.h443
-rw-r--r--include/asm-ppc/residual.h350
-rw-r--r--include/asm-ppc/rtc.h95
-rw-r--r--include/asm-ppc/serial.h43
-rw-r--r--include/asm-ppc/smp.h75
-rw-r--r--include/asm-ppc/spinlock.h168
-rw-r--r--include/asm-ppc/suspend.h12
-rw-r--r--include/asm-ppc/system.h289
-rw-r--r--include/asm-ppc/time.h161
-rw-r--r--include/asm-ppc/todc.h488
-rw-r--r--include/asm-ppc/traps.h1
-rw-r--r--include/asm-ppc/zorro.h30
74 files changed, 0 insertions, 16825 deletions
diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
deleted file mode 100644
index 4b0e15206006..000000000000
--- a/include/asm-ppc/8xx_immap.h
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * MPC8xx Internal Memory Map
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * The I/O on the MPC860 is comprised of blocks of special registers
- * and the dual port ram for the Communication Processor Module.
- * Within this space are functional units such as the SIU, memory
- * controller, system timers, and other control functions. It is
- * a combination that I found difficult to separate into logical
- * functional files.....but anyone else is welcome to try. -- Dan
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_8XX__
-#define __IMMAP_8XX__
-
-/* System configuration registers.
-*/
-typedef struct sys_conf {
- uint sc_siumcr;
- uint sc_sypcr;
- uint sc_swt;
- char res1[2];
- ushort sc_swsr;
- uint sc_sipend;
- uint sc_simask;
- uint sc_siel;
- uint sc_sivec;
- uint sc_tesr;
- char res2[0xc];
- uint sc_sdcr;
- char res3[0x4c];
-} sysconf8xx_t;
-
-/* PCMCIA configuration registers.
-*/
-typedef struct pcmcia_conf {
- uint pcmc_pbr0;
- uint pcmc_por0;
- uint pcmc_pbr1;
- uint pcmc_por1;
- uint pcmc_pbr2;
- uint pcmc_por2;
- uint pcmc_pbr3;
- uint pcmc_por3;
- uint pcmc_pbr4;
- uint pcmc_por4;
- uint pcmc_pbr5;
- uint pcmc_por5;
- uint pcmc_pbr6;
- uint pcmc_por6;
- uint pcmc_pbr7;
- uint pcmc_por7;
- char res1[0x20];
- uint pcmc_pgcra;
- uint pcmc_pgcrb;
- uint pcmc_pscr;
- char res2[4];
- uint pcmc_pipr;
- char res3[4];
- uint pcmc_per;
- char res4[4];
-} pcmconf8xx_t;
-
-/* Memory controller registers.
-*/
-typedef struct mem_ctlr {
- uint memc_br0;
- uint memc_or0;
- uint memc_br1;
- uint memc_or1;
- uint memc_br2;
- uint memc_or2;
- uint memc_br3;
- uint memc_or3;
- uint memc_br4;
- uint memc_or4;
- uint memc_br5;
- uint memc_or5;
- uint memc_br6;
- uint memc_or6;
- uint memc_br7;
- uint memc_or7;
- char res1[0x24];
- uint memc_mar;
- uint memc_mcr;
- char res2[4];
- uint memc_mamr;
- uint memc_mbmr;
- ushort memc_mstat;
- ushort memc_mptpr;
- uint memc_mdr;
- char res3[0x80];
-} memctl8xx_t;
-
-/*-----------------------------------------------------------------------
- * BR - Memory Controler: Base Register 16-9
- */
-#define BR_BA_MSK 0xffff8000 /* Base Address Mask */
-#define BR_AT_MSK 0x00007000 /* Address Type Mask */
-#define BR_PS_MSK 0x00000c00 /* Port Size Mask */
-#define BR_PS_32 0x00000000 /* 32 bit port size */
-#define BR_PS_16 0x00000800 /* 16 bit port size */
-#define BR_PS_8 0x00000400 /* 8 bit port size */
-#define BR_PARE 0x00000200 /* Parity Enable */
-#define BR_WP 0x00000100 /* Write Protect */
-#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */
-#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */
-#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */
-#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */
-#define BR_V 0x00000001 /* Bank Valid */
-
-/*-----------------------------------------------------------------------
- * OR - Memory Controler: Option Register 16-11
- */
-#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */
-#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */
-#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */
- /* Address Multiplex */
-#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */
-#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */
-#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */
-#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */
-#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
-#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
-#define OR_BI 0x00000100 /* Burst inhibit */
-#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */
-#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
-#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
-#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
-#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */
-#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */
-#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */
-#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */
-#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */
-#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */
-#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */
-#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */
-#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */
-#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */
-#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */
-#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */
-#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */
-#define OR_SETA 0x00000008 /* External Transfer Acknowledge */
-#define OR_TRLX 0x00000004 /* Timing Relaxed */
-#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */
-
-/* System Integration Timers.
-*/
-typedef struct sys_int_timers {
- ushort sit_tbscr;
- char res0[0x02];
- uint sit_tbreff0;
- uint sit_tbreff1;
- char res1[0x14];
- ushort sit_rtcsc;
- char res2[0x02];
- uint sit_rtc;
- uint sit_rtsec;
- uint sit_rtcal;
- char res3[0x10];
- ushort sit_piscr;
- char res4[2];
- uint sit_pitc;
- uint sit_pitr;
- char res5[0x34];
-} sit8xx_t;
-
-#define TBSCR_TBIRQ_MASK ((ushort)0xff00)
-#define TBSCR_REFA ((ushort)0x0080)
-#define TBSCR_REFB ((ushort)0x0040)
-#define TBSCR_REFAE ((ushort)0x0008)
-#define TBSCR_REFBE ((ushort)0x0004)
-#define TBSCR_TBF ((ushort)0x0002)
-#define TBSCR_TBE ((ushort)0x0001)
-
-#define RTCSC_RTCIRQ_MASK ((ushort)0xff00)
-#define RTCSC_SEC ((ushort)0x0080)
-#define RTCSC_ALR ((ushort)0x0040)
-#define RTCSC_38K ((ushort)0x0010)
-#define RTCSC_SIE ((ushort)0x0008)
-#define RTCSC_ALE ((ushort)0x0004)
-#define RTCSC_RTF ((ushort)0x0002)
-#define RTCSC_RTE ((ushort)0x0001)
-
-#define PISCR_PIRQ_MASK ((ushort)0xff00)
-#define PISCR_PS ((ushort)0x0080)
-#define PISCR_PIE ((ushort)0x0004)
-#define PISCR_PTF ((ushort)0x0002)
-#define PISCR_PTE ((ushort)0x0001)
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
- uint car_sccr;
- uint car_plprcr;
- uint car_rsr;
- char res[0x74]; /* Reserved area */
-} car8xx_t;
-
-/* System Integration Timers keys.
-*/
-typedef struct sitk {
- uint sitk_tbscrk;
- uint sitk_tbreff0k;
- uint sitk_tbreff1k;
- uint sitk_tbk;
- char res1[0x10];
- uint sitk_rtcsck;
- uint sitk_rtck;
- uint sitk_rtseck;
- uint sitk_rtcalk;
- char res2[0x10];
- uint sitk_piscrk;
- uint sitk_pitck;
- char res3[0x38];
-} sitk8xx_t;
-
-/* Clocks and reset keys.
-*/
-typedef struct cark {
- uint cark_sccrk;
- uint cark_plprcrk;
- uint cark_rsrk;
- char res[0x474];
-} cark8xx_t;
-
-/* The key to unlock registers maintained by keep-alive power.
-*/
-#define KAPWR_KEY ((unsigned int)0x55ccaa33)
-
-/* Video interface. MPC823 Only.
-*/
-typedef struct vid823 {
- ushort vid_vccr;
- ushort res1;
- u_char vid_vsr;
- u_char res2;
- u_char vid_vcmr;
- u_char res3;
- uint vid_vbcb;
- uint res4;
- uint vid_vfcr0;
- uint vid_vfaa0;
- uint vid_vfba0;
- uint vid_vfcr1;
- uint vid_vfaa1;
- uint vid_vfba1;
- u_char res5[0x18];
-} vid823_t;
-
-/* LCD interface. 823 Only.
-*/
-typedef struct lcd {
- uint lcd_lccr;
- uint lcd_lchcr;
- uint lcd_lcvcr;
- char res1[4];
- uint lcd_lcfaa;
- uint lcd_lcfba;
- char lcd_lcsr;
- char res2[0x7];
-} lcd823_t;
-
-/* I2C
-*/
-typedef struct i2c {
- u_char i2c_i2mod;
- char res1[3];
- u_char i2c_i2add;
- char res2[3];
- u_char i2c_i2brg;
- char res3[3];
- u_char i2c_i2com;
- char res4[3];
- u_char i2c_i2cer;
- char res5[3];
- u_char i2c_i2cmr;
- char res6[0x8b];
-} i2c8xx_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
- char res1[4];
- uint sdma_sdar;
- u_char sdma_sdsr;
- char res3[3];
- u_char sdma_sdmr;
- char res4[3];
- u_char sdma_idsr1;
- char res5[3];
- u_char sdma_idmr1;
- char res6[3];
- u_char sdma_idsr2;
- char res7[3];
- u_char sdma_idmr2;
- char res8[0x13];
-} sdma8xx_t;
-
-/* Communication Processor Module Interrupt Controller.
-*/
-typedef struct cpm_ic {
- ushort cpic_civr;
- char res[0xe];
- uint cpic_cicr;
- uint cpic_cipr;
- uint cpic_cimr;
- uint cpic_cisr;
-} cpic8xx_t;
-
-/* Input/Output Port control/status registers.
-*/
-typedef struct io_port {
- ushort iop_padir;
- ushort iop_papar;
- ushort iop_paodr;
- ushort iop_padat;
- char res1[8];
- ushort iop_pcdir;
- ushort iop_pcpar;
- ushort iop_pcso;
- ushort iop_pcdat;
- ushort iop_pcint;
- char res2[6];
- ushort iop_pddir;
- ushort iop_pdpar;
- char res3[2];
- ushort iop_pddat;
- uint utmode;
- char res4[4];
-} iop8xx_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
- ushort cpmt_tgcr;
- char res1[0xe];
- ushort cpmt_tmr1;
- ushort cpmt_tmr2;
- ushort cpmt_trr1;
- ushort cpmt_trr2;
- ushort cpmt_tcr1;
- ushort cpmt_tcr2;
- ushort cpmt_tcn1;
- ushort cpmt_tcn2;
- ushort cpmt_tmr3;
- ushort cpmt_tmr4;
- ushort cpmt_trr3;
- ushort cpmt_trr4;
- ushort cpmt_tcr3;
- ushort cpmt_tcr4;
- ushort cpmt_tcn3;
- ushort cpmt_tcn4;
- ushort cpmt_ter1;
- ushort cpmt_ter2;
- ushort cpmt_ter3;
- ushort cpmt_ter4;
- char res2[8];
-} cpmtimer8xx_t;
-
-/* Finally, the Communication Processor stuff.....
-*/
-typedef struct scc { /* Serial communication channels */
- uint scc_gsmrl;
- uint scc_gsmrh;
- ushort scc_psmr;
- char res1[2];
- ushort scc_todr;
- ushort scc_dsr;
- ushort scc_scce;
- char res2[2];
- ushort scc_sccm;
- char res3;
- u_char scc_sccs;
- char res4[8];
-} scc_t;
-
-typedef struct smc { /* Serial management channels */
- char res1[2];
- ushort smc_smcmr;
- char res2[2];
- u_char smc_smce;
- char res3[3];
- u_char smc_smcm;
- char res4[5];
-} smc_t;
-
-/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but
- * it fits within the address space.
- */
-
-typedef struct fec {
- uint fec_addr_low; /* lower 32 bits of station address */
- ushort fec_addr_high; /* upper 16 bits of station address */
- ushort res1; /* reserved */
- uint fec_hash_table_high; /* upper 32-bits of hash table */
- uint fec_hash_table_low; /* lower 32-bits of hash table */
- uint fec_r_des_start; /* beginning of Rx descriptor ring */
- uint fec_x_des_start; /* beginning of Tx descriptor ring */
- uint fec_r_buff_size; /* Rx buffer size */
- uint res2[9]; /* reserved */
- uint fec_ecntrl; /* ethernet control register */
- uint fec_ievent; /* interrupt event register */
- uint fec_imask; /* interrupt mask register */
- uint fec_ivec; /* interrupt level and vector status */
- uint fec_r_des_active; /* Rx ring updated flag */
- uint fec_x_des_active; /* Tx ring updated flag */
- uint res3[10]; /* reserved */
- uint fec_mii_data; /* MII data register */
- uint fec_mii_speed; /* MII speed control register */
- uint res4[17]; /* reserved */
- uint fec_r_bound; /* end of RAM (read-only) */
- uint fec_r_fstart; /* Rx FIFO start address */
- uint res5[6]; /* reserved */
- uint fec_x_fstart; /* Tx FIFO start address */
- uint res6[17]; /* reserved */
- uint fec_fun_code; /* fec SDMA function code */
- uint res7[3]; /* reserved */
- uint fec_r_cntrl; /* Rx control register */
- uint fec_r_hash; /* Rx hash register */
- uint res8[14]; /* reserved */
- uint fec_x_cntrl; /* Tx control register */
- uint res9[0x1e]; /* reserved */
-} fec_t;
-
-/* The FEC and LCD color map share the same address space....
- * I guess we will never see an 823T :-).
- */
-union fec_lcd {
- fec_t fl_un_fec;
- u_char fl_un_cmap[0x200];
-};
-
-typedef struct comm_proc {
- /* General control and status registers.
- */
- ushort cp_cpcr;
- u_char res1[2];
- ushort cp_rccr;
- u_char res2;
- u_char cp_rmds;
- u_char res3[4];
- ushort cp_cpmcr1;
- ushort cp_cpmcr2;
- ushort cp_cpmcr3;
- ushort cp_cpmcr4;
- u_char res4[2];
- ushort cp_rter;
- u_char res5[2];
- ushort cp_rtmr;
- u_char res6[0x14];
-
- /* Baud rate generators.
- */
- uint cp_brgc1;
- uint cp_brgc2;
- uint cp_brgc3;
- uint cp_brgc4;
-
- /* Serial Communication Channels.
- */
- scc_t cp_scc[4];
-
- /* Serial Management Channels.
- */
- smc_t cp_smc[2];
-
- /* Serial Peripheral Interface.
- */
- ushort cp_spmode;
- u_char res7[4];
- u_char cp_spie;
- u_char res8[3];
- u_char cp_spim;
- u_char res9[2];
- u_char cp_spcom;
- u_char res10[2];
-
- /* Parallel Interface Port.
- */
- u_char res11[2];
- ushort cp_pipc;
- u_char res12[2];
- ushort cp_ptpr;
- uint cp_pbdir;
- uint cp_pbpar;
- u_char res13[2];
- ushort cp_pbodr;
- uint cp_pbdat;
-
- /* Port E - MPC87x/88x only.
- */
- uint cp_pedir;
- uint cp_pepar;
- uint cp_peso;
- uint cp_peodr;
- uint cp_pedat;
-
- /* Communications Processor Timing Register -
- Contains RMII Timing for the FECs on MPC87x/88x only.
- */
- uint cp_cptr;
-
- /* Serial Interface and Time Slot Assignment.
- */
- uint cp_simode;
- u_char cp_sigmr;
- u_char res15;
- u_char cp_sistr;
- u_char cp_sicmr;
- u_char res16[4];
- uint cp_sicr;
- uint cp_sirp;
- u_char res17[0xc];
-
- /* 256 bytes of MPC823 video controller RAM array.
- */
- u_char cp_vcram[0x100];
- u_char cp_siram[0x200];
-
- /* The fast ethernet controller is not really part of the CPM,
- * but it resides in the address space.
- * The LCD color map is also here.
- */
- union fec_lcd fl_un;
-#define cp_fec fl_un.fl_un_fec
-#define lcd_cmap fl_un.fl_un_cmap
- char res18[0xE00];
-
- /* The DUET family has a second FEC here */
- fec_t cp_fec2;
-#define cp_fec1 cp_fec /* consistency macro */
-
- /* Dual Ported RAM follows.
- * There are many different formats for this memory area
- * depending upon the devices used and options chosen.
- * Some processors don't have all of it populated.
- */
- u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
- u_char cp_dparam[0x400]; /* Parameter RAM */
-} cpm8xx_t;
-
-/* Internal memory map.
-*/
-typedef struct immap {
- sysconf8xx_t im_siu_conf; /* SIU Configuration */
- pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */
- memctl8xx_t im_memctl; /* Memory Controller */
- sit8xx_t im_sit; /* System integration timers */
- car8xx_t im_clkrst; /* Clocks and reset */
- sitk8xx_t im_sitk; /* Sys int timer keys */
- cark8xx_t im_clkrstk; /* Clocks and reset keys */
- vid823_t im_vid; /* Video (823 only) */
- lcd823_t im_lcd; /* LCD (823 only) */
- i2c8xx_t im_i2c; /* I2C control/status */
- sdma8xx_t im_sdma; /* SDMA control/status */
- cpic8xx_t im_cpic; /* CPM Interrupt Controller */
- iop8xx_t im_ioport; /* IO Port control/status */
- cpmtimer8xx_t im_cpmtimer; /* CPM timers */
- cpm8xx_t im_cpm; /* Communication processor */
-} immap_t;
-
-#endif /* __IMMAP_8XX__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/amigayle.h b/include/asm-ppc/amigayle.h
deleted file mode 100644
index 1fe0b87859b0..000000000000
--- a/include/asm-ppc/amigayle.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/amigayle.h>
diff --git a/include/asm-ppc/amipcmcia.h b/include/asm-ppc/amipcmcia.h
deleted file mode 100644
index 3f65f63f508f..000000000000
--- a/include/asm-ppc/amipcmcia.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/amipcmcia.h>
diff --git a/include/asm-ppc/bootinfo.h b/include/asm-ppc/bootinfo.h
deleted file mode 100644
index f6ed77aee328..000000000000
--- a/include/asm-ppc/bootinfo.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Non-machine dependent bootinfo structure. Basic idea
- * borrowed from the m68k.
- *
- * Copyright (C) 1999 Cort Dougan <cort@ppc.kernel.org>
- */
-
-#ifdef __KERNEL__
-#ifndef _PPC_BOOTINFO_H
-#define _PPC_BOOTINFO_H
-
-#include <asm/page.h>
-
-struct bi_record {
- unsigned long tag; /* tag ID */
- unsigned long size; /* size of record (in bytes) */
- unsigned long data[0]; /* data */
-};
-
-#define BI_FIRST 0x1010 /* first record - marker */
-#define BI_LAST 0x1011 /* last record - marker */
-#define BI_CMD_LINE 0x1012
-#define BI_BOOTLOADER_ID 0x1013
-#define BI_INITRD 0x1014
-#define BI_SYSMAP 0x1015
-#define BI_MACHTYPE 0x1016
-#define BI_MEMSIZE 0x1017
-#define BI_BOARD_INFO 0x1018
-
-extern struct bi_record *find_bootinfo(void);
-extern void bootinfo_init(struct bi_record *rec);
-extern void bootinfo_append(unsigned long tag, unsigned long size, void * data);
-extern void parse_bootinfo(struct bi_record *rec);
-extern unsigned long boot_mem_size;
-
-static inline struct bi_record *
-bootinfo_addr(unsigned long offset)
-{
-
- return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1,
- (1 << 20));
-}
-
-
-#endif /* _PPC_BOOTINFO_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/bootx.h b/include/asm-ppc/bootx.h
deleted file mode 100644
index b0c51b45d7a2..000000000000
--- a/include/asm-ppc/bootx.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file describes the structure passed from the BootX application
- * (for MacOS) when it is used to boot Linux.
- *
- * Written by Benjamin Herrenschmidt.
- */
-
-
-#ifndef __ASM_BOOTX_H__
-#define __ASM_BOOTX_H__
-
-#ifdef macintosh
-#include <Types.h>
-#include "linux_type_defs.h"
-#endif
-
-#ifdef macintosh
-/* All this requires PowerPC alignment */
-#pragma options align=power
-#endif
-
-/* On kernel entry:
- *
- * r3 = 0x426f6f58 ('BooX')
- * r4 = pointer to boot_infos
- * r5 = NULL
- *
- * Data and instruction translation disabled, interrupts
- * disabled, kernel loaded at physical 0x00000000 on PCI
- * machines (will be different on NuBus).
- */
-
-#define BOOT_INFO_VERSION 5
-#define BOOT_INFO_COMPATIBLE_VERSION 1
-
-/* Bit in the architecture flag mask. More to be defined in
- future versions. Note that either BOOT_ARCH_PCI or
- BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
- set additionally when BOOT_ARCH_NUBUS is set.
- */
-#define BOOT_ARCH_PCI 0x00000001UL
-#define BOOT_ARCH_NUBUS 0x00000002UL
-#define BOOT_ARCH_NUBUS_PDM 0x00000010UL
-#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL
-#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL
-
-/* Maximum number of ranges in phys memory map */
-#define MAX_MEM_MAP_SIZE 26
-
-/* This is the format of an element in the physical memory map. Note that
- the map is optional and current BootX will only build it for pre-PCI
- machines */
-typedef struct boot_info_map_entry
-{
- __u32 physAddr; /* Physical starting address */
- __u32 size; /* Size in bytes */
-} boot_info_map_entry_t;
-
-
-/* Here are the boot informations that are passed to the bootstrap
- * Note that the kernel arguments and the device tree are appended
- * at the end of this structure. */
-typedef struct boot_infos
-{
- /* Version of this structure */
- __u32 version;
- /* backward compatible down to version: */
- __u32 compatible_version;
-
- /* NEW (vers. 2) this holds the current _logical_ base addr of
- the frame buffer (for use by early boot message) */
- __u8* logicalDisplayBase;
-
- /* NEW (vers. 4) Apple's machine identification */
- __u32 machineID;
-
- /* NEW (vers. 4) Detected hw architecture */
- __u32 architecture;
-
- /* The device tree (internal addresses relative to the beginning of the tree,
- * device tree offset relative to the beginning of this structure).
- * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
- * field is 0.
- */
- __u32 deviceTreeOffset; /* Device tree offset */
- __u32 deviceTreeSize; /* Size of the device tree */
-
- /* Some infos about the current MacOS display */
- __u32 dispDeviceRect[4]; /* left,top,right,bottom */
- __u32 dispDeviceDepth; /* (8, 16 or 32) */
- __u8* dispDeviceBase; /* base address (physical) */
- __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */
- __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */
- /* Optional offset in the registry to the current
- * MacOS display. (Can be 0 when not detected) */
- __u32 dispDeviceRegEntryOffset;
-
- /* Optional pointer to boot ramdisk (offset from this structure) */
- __u32 ramDisk;
- __u32 ramDiskSize; /* size of ramdisk image */
-
- /* Kernel command line arguments (offset from this structure) */
- __u32 kernelParamsOffset;
-
- /* ALL BELOW NEW (vers. 4) */
-
- /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
- (non-PCI) only. On PCI, memory is contiguous and it's size is in the
- device-tree. */
- boot_info_map_entry_t
- physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
- __u32 physMemoryMapSize; /* How many entries in map */
-
-
- /* The framebuffer size (optional, currently 0) */
- __u32 frameBufferSize; /* Represents a max size, can be 0. */
-
- /* NEW (vers. 5) */
-
- /* Total params size (args + colormap + device tree + ramdisk) */
- __u32 totalParamsSize;
-
-} boot_infos_t;
-
-/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index is represented
- * by 3 short words containing a 16 bits (unsigned) color component.
- * Later versions may contain the gamma table for direct-color devices here.
- */
-#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL)
-
-#ifdef macintosh
-#pragma options align=reset
-#endif
-
-#endif
diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h
deleted file mode 100644
index ed3630251b3b..000000000000
--- a/include/asm-ppc/btext.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Definitions for using the procedures in btext.c.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#ifndef __PPC_BTEXT_H
-#define __PPC_BTEXT_H
-#ifdef __KERNEL__
-
-#include <asm/bootx.h>
-
-extern void btext_clearscreen(void);
-extern void btext_flushscreen(void);
-
-extern unsigned long disp_BAT[2];
-
-extern boot_infos_t disp_bi;
-extern int boot_text_mapped;
-
-extern void btext_init(boot_infos_t *bi);
-extern void btext_welcome(void);
-extern void btext_prepare_BAT(void);
-extern void btext_setup_display(int width, int height, int depth, int pitch,
- unsigned long address);
-extern void map_boot_text(void);
-extern void btext_update_display(unsigned long phys, int width, int height,
- int depth, int pitch);
-
-extern void btext_drawchar(char c);
-extern void btext_drawstring(const char *str);
-extern void btext_drawhex(unsigned long v);
-
-#endif /* __KERNEL__ */
-#endif /* __PPC_BTEXT_H */
diff --git a/include/asm-ppc/cpm1.h b/include/asm-ppc/cpm1.h
deleted file mode 100644
index 03035acd85c6..000000000000
--- a/include/asm-ppc/cpm1.h
+++ /dev/null
@@ -1,688 +0,0 @@
-/*
- * MPC8xx Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This file contains structures and information for the communication
- * processor channels. Some CPM control and status is available
- * throught the MPC8xx internal memory map. See immap.h for details.
- * This file only contains what I need for the moment, not the total
- * CPM capabilities. I (or someone else) will add definitions as they
- * are needed. -- Dan
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space. The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM1__
-#define __CPM1__
-
-#include <asm/8xx_immap.h>
-#include <asm/ptrace.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((ushort)0x8000)
-#define CPM_CR_OPCODE ((ushort)0x0f00)
-#define CPM_CR_CHAN ((ushort)0x00f0)
-#define CPM_CR_FLG ((ushort)0x0001)
-
-/* Some commands (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR
-
-/* Channel numbers.
-*/
-#define CPM_CR_CH_SCC1 ((ushort)0x0000)
-#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */
-#define CPM_CR_CH_SCC2 ((ushort)0x0004)
-#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */
-#define CPM_CR_CH_TIMER CPM_CR_CH_SPI
-#define CPM_CR_CH_SCC3 ((ushort)0x0008)
-#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */
-#define CPM_CR_CH_SCC4 ((ushort)0x000c)
-#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */
-
-#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4))
-
-/* The dual ported RAM is multi-functional. Some areas can be (and are
- * being) used for microcode. There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)0x0800)
-#define CPM_DATAONLY_SIZE ((uint)0x0700)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm8xx_t *cpmp; /* Pointer to comm processor */
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-extern uint cpm_dpram_phys(u8 *addr);
-extern void cpm_setbrg(uint brg, uint rate);
-
-extern void cpm_load_patch(volatile immap_t *immr);
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_UN ((ushort)0x0002) /* Underrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-#define BD_SC_CL ((ushort)0x0001) /* Collision */
-
-/* Parameter RAM offsets.
-*/
-#define PROFF_SCC1 ((uint)0x0000)
-#define PROFF_IIC ((uint)0x0080)
-#define PROFF_SCC2 ((uint)0x0100)
-#define PROFF_SPI ((uint)0x0180)
-#define PROFF_SCC3 ((uint)0x0200)
-#define PROFF_SMC1 ((uint)0x0280)
-#define PROFF_SCC4 ((uint)0x0300)
-#define PROFF_SMC2 ((uint)0x0380)
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
- char res1[8]; /* Reserved */
- ushort smc_rpbase; /* Relocation pointer */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer. It is half duplex, in that
- * it can only receive or transmit. The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
- ushort scent_rbase;
- ushort scent_tbase;
- u_char scent_cfcr;
- u_char scent_smask;
- ushort scent_mrblr;
- uint scent_rstate;
- uint scent_r_ptr;
- ushort scent_rbptr;
- ushort scent_r_cnt;
- uint scent_rtemp;
- uint scent_tstate;
- uint scent_t_ptr;
- ushort scent_tbptr;
- ushort scent_t_cnt;
- uint scent_ttemp;
- ushort scent_max_sl;
- ushort scent_sl_cnt;
- ushort scent_character1;
- ushort scent_character2;
- ushort scent_character3;
- ushort scent_character4;
- ushort scent_character5;
- ushort scent_character6;
- ushort scent_character7;
- ushort scent_character8;
- ushort scent_rccm;
- ushort scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F ((u_char)0x08)
-#define SMC_CENT_PE ((u_char)0x04)
-#define SMC_CENT_S ((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SI Clock Route Register
-*/
-#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000)
-#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000)
-#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800)
-#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100)
-#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000)
-#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000)
-#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000)
-#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* Function code bits.
-*/
-#define SCC_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* CPM Ethernet through SCCx.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* DA is Broadcast */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* DA is Multicast */
-#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- char res1[8]; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
- char res1[4]; /* Reserved */
- ushort iic_rpbase; /* Relocation pointer */
- char res2[2]; /* Reserved */
-} iic_t;
-
-#define BD_IIC_START ((ushort)0x0400)
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res;
- ushort spi_rpbase; /* Relocation pointer */
- ushort spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */
-#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */
-#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME 0x20
-#define SPIE_TXE 0x10
-#define SPIE_BSY 0x04
-#define SPIE_TXB 0x02
-#define SPIE_RXB 0x01
-
-/*
- * RISC Controller Configuration Register definitons
- */
-#define RCCR_TIME 0x8000 /* RISC Timer Enable */
-#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */
-#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */
-
-/* RISC Timer Parameter RAM offset */
-#define PROFF_RTMR ((uint)0x01B0)
-
-typedef struct risc_timer_pram {
- unsigned short tm_base; /* RISC Timer Table Base Address */
- unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */
- unsigned short r_tmr; /* RISC Timer Mode Register */
- unsigned short r_tmv; /* RISC Timer Valid Register */
- unsigned long tm_cmd; /* RISC Timer Command Register */
- unsigned long tm_cnt; /* RISC Timer Internal Count */
-} rt_pram_t;
-
-/* Bits in RISC Timer Command Register */
-#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */
-#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */
-#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */
-#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */
-#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */
-
-/* CPM interrupts. There are nearly 32 interrupts generated by CPM
- * channels or devices. All of these are presented to the PPC core
- * as a single interrupt. The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler. We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-#define CPMVEC_NR 32
-#define CPMVEC_PIO_PC15 ((ushort)0x1f)
-#define CPMVEC_SCC1 ((ushort)0x1e)
-#define CPMVEC_SCC2 ((ushort)0x1d)
-#define CPMVEC_SCC3 ((ushort)0x1c)
-#define CPMVEC_SCC4 ((ushort)0x1b)
-#define CPMVEC_PIO_PC14 ((ushort)0x1a)
-#define CPMVEC_TIMER1 ((ushort)0x19)
-#define CPMVEC_PIO_PC13 ((ushort)0x18)
-#define CPMVEC_PIO_PC12 ((ushort)0x17)
-#define CPMVEC_SDMA_CB_ERR ((ushort)0x16)
-#define CPMVEC_IDMA1 ((ushort)0x15)
-#define CPMVEC_IDMA2 ((ushort)0x14)
-#define CPMVEC_TIMER2 ((ushort)0x12)
-#define CPMVEC_RISCTIMER ((ushort)0x11)
-#define CPMVEC_I2C ((ushort)0x10)
-#define CPMVEC_PIO_PC11 ((ushort)0x0f)
-#define CPMVEC_PIO_PC10 ((ushort)0x0e)
-#define CPMVEC_TIMER3 ((ushort)0x0c)
-#define CPMVEC_PIO_PC9 ((ushort)0x0b)
-#define CPMVEC_PIO_PC8 ((ushort)0x0a)
-#define CPMVEC_PIO_PC7 ((ushort)0x09)
-#define CPMVEC_TIMER4 ((ushort)0x07)
-#define CPMVEC_PIO_PC6 ((ushort)0x06)
-#define CPMVEC_SPI ((ushort)0x05)
-#define CPMVEC_SMC1 ((ushort)0x04)
-#define CPMVEC_SMC2 ((ushort)0x03)
-#define CPMVEC_PIO_PC5 ((ushort)0x02)
-#define CPMVEC_PIO_PC4 ((ushort)0x01)
-#define CPMVEC_ERROR ((ushort)0x00)
-
-/* CPM interrupt configuration vector.
-*/
-#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */
-#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
-#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
-#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
-#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
-#define CICR_IEN ((uint)0x00000080) /* Int. enable */
-#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
-
-extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
-extern void cpm_free_handler(int vec);
-
-#endif /* __CPM1__ */
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
deleted file mode 100644
index 4c538228e42f..000000000000
--- a/include/asm-ppc/cpm2.h
+++ /dev/null
@@ -1,1248 +0,0 @@
-/*
- * Communication Processor Module v2.
- *
- * This file contains structures and information for the communication
- * processor channels found in the dual port RAM or parameter RAM.
- * All CPM control and status is available through the CPM2 internal
- * memory map. See immap_cpm2.h for details.
- */
-#ifdef __KERNEL__
-#ifndef __CPM2__
-#define __CPM2__
-
-#include <asm/immap_cpm2.h>
-
-/* CPM Command register.
-*/
-#define CPM_CR_RST ((uint)0x80000000)
-#define CPM_CR_PAGE ((uint)0x7c000000)
-#define CPM_CR_SBLOCK ((uint)0x03e00000)
-#define CPM_CR_FLG ((uint)0x00010000)
-#define CPM_CR_MCN ((uint)0x00003fc0)
-#define CPM_CR_OPCODE ((uint)0x0000000f)
-
-/* Device sub-block and page codes.
-*/
-#define CPM_CR_SCC1_SBLOCK (0x04)
-#define CPM_CR_SCC2_SBLOCK (0x05)
-#define CPM_CR_SCC3_SBLOCK (0x06)
-#define CPM_CR_SCC4_SBLOCK (0x07)
-#define CPM_CR_SMC1_SBLOCK (0x08)
-#define CPM_CR_SMC2_SBLOCK (0x09)
-#define CPM_CR_SPI_SBLOCK (0x0a)
-#define CPM_CR_I2C_SBLOCK (0x0b)
-#define CPM_CR_TIMER_SBLOCK (0x0f)
-#define CPM_CR_RAND_SBLOCK (0x0e)
-#define CPM_CR_FCC1_SBLOCK (0x10)
-#define CPM_CR_FCC2_SBLOCK (0x11)
-#define CPM_CR_FCC3_SBLOCK (0x12)
-#define CPM_CR_IDMA1_SBLOCK (0x14)
-#define CPM_CR_IDMA2_SBLOCK (0x15)
-#define CPM_CR_IDMA3_SBLOCK (0x16)
-#define CPM_CR_IDMA4_SBLOCK (0x17)
-#define CPM_CR_MCC1_SBLOCK (0x1c)
-
-#define CPM_CR_FCC_SBLOCK(x) (x + 0x10)
-
-#define CPM_CR_SCC1_PAGE (0x00)
-#define CPM_CR_SCC2_PAGE (0x01)
-#define CPM_CR_SCC3_PAGE (0x02)
-#define CPM_CR_SCC4_PAGE (0x03)
-#define CPM_CR_SMC1_PAGE (0x07)
-#define CPM_CR_SMC2_PAGE (0x08)
-#define CPM_CR_SPI_PAGE (0x09)
-#define CPM_CR_I2C_PAGE (0x0a)
-#define CPM_CR_TIMER_PAGE (0x0a)
-#define CPM_CR_RAND_PAGE (0x0a)
-#define CPM_CR_FCC1_PAGE (0x04)
-#define CPM_CR_FCC2_PAGE (0x05)
-#define CPM_CR_FCC3_PAGE (0x06)
-#define CPM_CR_IDMA1_PAGE (0x07)
-#define CPM_CR_IDMA2_PAGE (0x08)
-#define CPM_CR_IDMA3_PAGE (0x09)
-#define CPM_CR_IDMA4_PAGE (0x0a)
-#define CPM_CR_MCC1_PAGE (0x07)
-#define CPM_CR_MCC2_PAGE (0x08)
-
-#define CPM_CR_FCC_PAGE(x) (x + 0x04)
-
-/* Some opcodes (there are more...later)
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_START_IDMA ((ushort)0x0009)
-#define CPM_CR_STOP_IDMA ((ushort)0x000b)
-
-#define mk_cr_cmd(PG, SBC, MCN, OP) \
- ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
-
-/* Dual Port RAM addresses. The first 16K is available for almost
- * any CPM use, so we put the BDs there. The first 128 bytes are
- * used for SMC1 and SMC2 parameter RAM, so we start allocating
- * BDs above that. All of this must change when we start
- * downloading RAM microcode.
- */
-#define CPM_DATAONLY_BASE ((uint)128)
-#define CPM_DP_NOSPACE ((uint)0x7fffffff)
-#if defined(CONFIG_8272)
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000)
-#else
-#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
-#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
-#endif
-
-/* The number of pages of host memory we allocate for CPM. This is
- * done early in kernel initialization to get physically contiguous
- * pages.
- */
-#define NUM_CPM_HOST_PAGES 2
-
-/* Export the base address of the communication processor registers
- * and dual port ram.
- */
-extern cpm_cpm2_t *cpmp; /* Pointer to comm processor */
-
-extern unsigned long cpm_dpalloc(uint size, uint align);
-extern int cpm_dpfree(unsigned long offset);
-extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align);
-extern void cpm_dpdump(void);
-extern void *cpm_dpram_addr(unsigned long offset);
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
-extern void cpm2_reset(void);
-
-
-/* Buffer descriptors used by many of the CPM protocols.
-*/
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */
-#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
-#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
-#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
-#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
-#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
-#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
-#define BD_SC_BR ((ushort)0x0020) /* Break received */
-#define BD_SC_FR ((ushort)0x0010) /* Framing error */
-#define BD_SC_PR ((ushort)0x0008) /* Parity error */
-#define BD_SC_OV ((ushort)0x0002) /* Overrun */
-#define BD_SC_CD ((ushort)0x0001) /* ?? */
-
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-
-/* Parameter RAM offsets from the base.
-*/
-#define PROFF_SCC1 ((uint)0x8000)
-#define PROFF_SCC2 ((uint)0x8100)
-#define PROFF_SCC3 ((uint)0x8200)
-#define PROFF_SCC4 ((uint)0x8300)
-#define PROFF_FCC1 ((uint)0x8400)
-#define PROFF_FCC2 ((uint)0x8500)
-#define PROFF_FCC3 ((uint)0x8600)
-#define PROFF_MCC1 ((uint)0x8700)
-#define PROFF_SMC1_BASE ((uint)0x87fc)
-#define PROFF_IDMA1_BASE ((uint)0x87fe)
-#define PROFF_MCC2 ((uint)0x8800)
-#define PROFF_SMC2_BASE ((uint)0x88fc)
-#define PROFF_IDMA2_BASE ((uint)0x88fe)
-#define PROFF_SPI_BASE ((uint)0x89fc)
-#define PROFF_IDMA3_BASE ((uint)0x89fe)
-#define PROFF_TIMERS ((uint)0x8ae0)
-#define PROFF_REVNUM ((uint)0x8af0)
-#define PROFF_RAND ((uint)0x8af8)
-#define PROFF_I2C_BASE ((uint)0x8afc)
-#define PROFF_IDMA4_BASE ((uint)0x8afe)
-
-#define PROFF_SCC_SIZE ((uint)0x100)
-#define PROFF_FCC_SIZE ((uint)0x100)
-#define PROFF_SMC_SIZE ((uint)64)
-
-/* The SMCs are relocated to any of the first eight DPRAM pages.
- * We will fix these at the first locations of DPRAM, until we
- * get some microcode patches :-).
- * The parameter ram space for the SMCs is fifty-some bytes, and
- * they are required to start on a 64 byte boundary.
- */
-#define PROFF_SMC1 (0)
-#define PROFF_SMC2 (64)
-
-
-/* Define enough so I can at least use the serial port as a UART.
- */
-typedef struct smc_uart {
- ushort smc_rbase; /* Rx Buffer descriptor base address */
- ushort smc_tbase; /* Tx Buffer descriptor base address */
- u_char smc_rfcr; /* Rx function code */
- u_char smc_tfcr; /* Tx function code */
- ushort smc_mrblr; /* Max receive buffer length */
- uint smc_rstate; /* Internal */
- uint smc_idp; /* Internal */
- ushort smc_rbptr; /* Internal */
- ushort smc_ibc; /* Internal */
- uint smc_rxtmp; /* Internal */
- uint smc_tstate; /* Internal */
- uint smc_tdp; /* Internal */
- ushort smc_tbptr; /* Internal */
- ushort smc_tbc; /* Internal */
- uint smc_txtmp; /* Internal */
- ushort smc_maxidl; /* Maximum idle characters */
- ushort smc_tmpidl; /* Temporary idle counter */
- ushort smc_brklen; /* Last received break length */
- ushort smc_brkec; /* rcv'd break condition counter */
- ushort smc_brkcr; /* xmt break count register */
- ushort smc_rmask; /* Temporary bit mask */
- uint smc_stmp; /* SDMA Temp */
-} smc_uart_t;
-
-/* SMC uart mode register (Internal memory map).
-*/
-#define SMCMR_REN ((ushort)0x0001)
-#define SMCMR_TEN ((ushort)0x0002)
-#define SMCMR_DM ((ushort)0x000c)
-#define SMCMR_SM_GCI ((ushort)0x0000)
-#define SMCMR_SM_UART ((ushort)0x0020)
-#define SMCMR_SM_TRANS ((ushort)0x0030)
-#define SMCMR_SM_MASK ((ushort)0x0030)
-#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
-#define SMCMR_REVD SMCMR_PM_EVEN
-#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
-#define SMCMR_BS SMCMR_PEN
-#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
-#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
-#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC Event and Mask register.
-*/
-#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */
-#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */
-#define SMCM_TXE ((unsigned char)0x10)
-#define SMCM_BSY ((unsigned char)0x04)
-#define SMCM_TX ((unsigned char)0x02)
-#define SMCM_RX ((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST ((uint)0x00020000)
-#define CPM_BRG_EN ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
-#define CPM_BRG_ATB ((uint)0x00002000)
-#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
-#define CPM_BRG_DIV16 ((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP ((uint)0x00040000)
-#define SCC_GSMRH_GDE ((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
-#define SCC_GSMRH_REVD ((uint)0x00002000)
-#define SCC_GSMRH_TRX ((uint)0x00001000)
-#define SCC_GSMRH_TTX ((uint)0x00000800)
-#define SCC_GSMRH_CDP ((uint)0x00000400)
-#define SCC_GSMRH_CTSP ((uint)0x00000200)
-#define SCC_GSMRH_CDS ((uint)0x00000100)
-#define SCC_GSMRH_CTSS ((uint)0x00000080)
-#define SCC_GSMRH_TFL ((uint)0x00000040)
-#define SCC_GSMRH_RFW ((uint)0x00000020)
-#define SCC_GSMRH_TXSY ((uint)0x00000010)
-#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
-#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
-#define SCC_GSMRH_RTSM ((uint)0x00000002)
-#define SCC_GSMRH_RSYN ((uint)0x00000001)
-
-#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
-#define SCC_GSMRL_TCI ((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
-#define SCC_GSMRL_RINV ((uint)0x02000000)
-#define SCC_GSMRL_TINV ((uint)0x01000000)
-#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
-#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
-#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
-#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
-#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
-#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
-#define SCC_GSMRL_TEND ((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
-#define SCC_GSMRL_ENR ((uint)0x00000020)
-#define SCC_GSMRL_ENT ((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
-
-#define SCC_TODR_TOD ((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define SCCM_TXE ((unsigned char)0x10)
-#define SCCM_BSY ((unsigned char)0x04)
-#define SCCM_TX ((unsigned char)0x02)
-#define SCCM_RX ((unsigned char)0x01)
-
-typedef struct scc_param {
- ushort scc_rbase; /* Rx Buffer descriptor base address */
- ushort scc_tbase; /* Tx Buffer descriptor base address */
- u_char scc_rfcr; /* Rx function code */
- u_char scc_tfcr; /* Tx function code */
- ushort scc_mrblr; /* Max receive buffer length */
- uint scc_rstate; /* Internal */
- uint scc_idp; /* Internal */
- ushort scc_rbptr; /* Internal */
- ushort scc_ibc; /* Internal */
- uint scc_rxtmp; /* Internal */
- uint scc_tstate; /* Internal */
- uint scc_tdp; /* Internal */
- ushort scc_tbptr; /* Internal */
- ushort scc_tbc; /* Internal */
- uint scc_txtmp; /* Internal */
- uint scc_rcrc; /* Internal */
- uint scc_tcrc; /* Internal */
-} sccp_t;
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
- sccp_t sen_genscc;
- uint sen_cpres; /* Preset CRC */
- uint sen_cmask; /* Constant mask for CRC */
- uint sen_crcec; /* CRC Error counter */
- uint sen_alec; /* alignment error counter */
- uint sen_disfc; /* discard frame counter */
- ushort sen_pads; /* Tx short frame pad character */
- ushort sen_retlim; /* Retry limit threshold */
- ushort sen_retcnt; /* Retry limit counter */
- ushort sen_maxflr; /* maximum frame length register */
- ushort sen_minflr; /* minimum frame length register */
- ushort sen_maxd1; /* maximum DMA1 length */
- ushort sen_maxd2; /* maximum DMA2 length */
- ushort sen_maxd; /* Rx max DMA */
- ushort sen_dmacnt; /* Rx DMA counter */
- ushort sen_maxb; /* Max BD byte count */
- ushort sen_gaddr1; /* Group address filter */
- ushort sen_gaddr2;
- ushort sen_gaddr3;
- ushort sen_gaddr4;
- uint sen_tbuf0data0; /* Save area 0 - current frame */
- uint sen_tbuf0data1; /* Save area 1 - current frame */
- uint sen_tbuf0rba; /* Internal */
- uint sen_tbuf0crc; /* Internal */
- ushort sen_tbuf0bcnt; /* Internal */
- ushort sen_paddrh; /* physical address (MSB) */
- ushort sen_paddrm;
- ushort sen_paddrl; /* physical address (LSB) */
- ushort sen_pper; /* persistence */
- ushort sen_rfbdptr; /* Rx first BD pointer */
- ushort sen_tfbdptr; /* Tx first BD pointer */
- ushort sen_tlbdptr; /* Tx last BD pointer */
- uint sen_tbuf1data0; /* Save area 0 - current frame */
- uint sen_tbuf1data1; /* Save area 1 - current frame */
- uint sen_tbuf1rba; /* Internal */
- uint sen_tbuf1crc; /* Internal */
- ushort sen_tbuf1bcnt; /* Internal */
- ushort sen_txlen; /* Tx Frame length counter */
- ushort sen_iaddr1; /* Individual address filter */
- ushort sen_iaddr2;
- ushort sen_iaddr3;
- ushort sen_iaddr4;
- ushort sen_boffcnt; /* Backoff counter */
-
- /* NOTE: Some versions of the manual have the following items
- * incorrectly documented. Below is the proper order.
- */
- ushort sen_taddrh; /* temp address (MSB) */
- ushort sen_taddrm;
- ushort sen_taddrl; /* temp address (LSB) */
-} scc_enet_t;
-
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
-#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* SCC Mode Register (PSMR) as used by Ethernet.
-*/
-#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
-#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
-#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
-#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
-#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
-#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
-#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
-#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
-#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
-#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
-#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
-#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
-#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY ((ushort)0x8000)
-#define BD_ENET_RX_WRAP ((ushort)0x2000)
-#define BD_ENET_RX_INTR ((ushort)0x1000)
-#define BD_ENET_RX_LAST ((ushort)0x0800)
-#define BD_ENET_RX_FIRST ((ushort)0x0400)
-#define BD_ENET_RX_MISS ((ushort)0x0100)
-#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
-#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
-#define BD_ENET_RX_LG ((ushort)0x0020)
-#define BD_ENET_RX_NO ((ushort)0x0010)
-#define BD_ENET_RX_SH ((ushort)0x0008)
-#define BD_ENET_RX_CR ((ushort)0x0004)
-#define BD_ENET_RX_OV ((ushort)0x0002)
-#define BD_ENET_RX_CL ((ushort)0x0001)
-#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY ((ushort)0x8000)
-#define BD_ENET_TX_PAD ((ushort)0x4000)
-#define BD_ENET_TX_WRAP ((ushort)0x2000)
-#define BD_ENET_TX_INTR ((ushort)0x1000)
-#define BD_ENET_TX_LAST ((ushort)0x0800)
-#define BD_ENET_TX_TC ((ushort)0x0400)
-#define BD_ENET_TX_DEF ((ushort)0x0200)
-#define BD_ENET_TX_HB ((ushort)0x0100)
-#define BD_ENET_TX_LC ((ushort)0x0080)
-#define BD_ENET_TX_RL ((ushort)0x0040)
-#define BD_ENET_TX_RCMASK ((ushort)0x003c)
-#define BD_ENET_TX_UN ((ushort)0x0002)
-#define BD_ENET_TX_CSL ((ushort)0x0001)
-#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
- sccp_t scc_genscc;
- uint scc_res1; /* Reserved */
- uint scc_res2; /* Reserved */
- ushort scc_maxidl; /* Maximum idle chars */
- ushort scc_idlc; /* temp idle counter */
- ushort scc_brkcr; /* Break count register */
- ushort scc_parec; /* receive parity error counter */
- ushort scc_frmec; /* receive framing error counter */
- ushort scc_nosec; /* receive noise counter */
- ushort scc_brkec; /* receive break condition counter */
- ushort scc_brkln; /* last received break length */
- ushort scc_uaddr1; /* UART address character 1 */
- ushort scc_uaddr2; /* UART address character 2 */
- ushort scc_rtemp; /* Temp storage */
- ushort scc_toseq; /* Transmit out of sequence char */
- ushort scc_char1; /* control character 1 */
- ushort scc_char2; /* control character 2 */
- ushort scc_char3; /* control character 3 */
- ushort scc_char4; /* control character 4 */
- ushort scc_char5; /* control character 5 */
- ushort scc_char6; /* control character 6 */
- ushort scc_char7; /* control character 7 */
- ushort scc_char8; /* control character 8 */
- ushort scc_rccm; /* receive control character mask */
- ushort scc_rccr; /* receive control character register */
- ushort scc_rlbc; /* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR ((ushort)0x1000)
-#define UART_SCCM_GLT ((ushort)0x0800)
-#define UART_SCCM_AB ((ushort)0x0200)
-#define UART_SCCM_IDL ((ushort)0x0100)
-#define UART_SCCM_GRA ((ushort)0x0080)
-#define UART_SCCM_BRKE ((ushort)0x0040)
-#define UART_SCCM_BRKS ((ushort)0x0020)
-#define UART_SCCM_CCR ((ushort)0x0008)
-#define UART_SCCM_BSY ((ushort)0x0004)
-#define UART_SCCM_TX ((ushort)0x0002)
-#define UART_SCCM_RX ((ushort)0x0001)
-
-/* The SCC PSMR when used as a UART.
-*/
-#define SCU_PSMR_FLC ((ushort)0x8000)
-#define SCU_PSMR_SL ((ushort)0x4000)
-#define SCU_PSMR_CL ((ushort)0x3000)
-#define SCU_PSMR_UM ((ushort)0x0c00)
-#define SCU_PSMR_FRZ ((ushort)0x0200)
-#define SCU_PSMR_RZS ((ushort)0x0100)
-#define SCU_PSMR_SYN ((ushort)0x0080)
-#define SCU_PSMR_DRT ((ushort)0x0040)
-#define SCU_PSMR_PEN ((ushort)0x0010)
-#define SCU_PSMR_RPM ((ushort)0x000c)
-#define SCU_PSMR_REVP ((ushort)0x0008)
-#define SCU_PSMR_TPM ((ushort)0x0003)
-#define SCU_PSMR_TEVP ((ushort)0x0002)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
- sccp_t st_genscc;
- uint st_cpres; /* Preset CRC */
- uint st_cmask; /* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST ((ushort)0x0800)
-
-/* How about some FCCs.....
-*/
-#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
-#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
-#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
-#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
-#define FCC_GFMR_TCI ((uint)0x20000000)
-#define FCC_GFMR_TRX ((uint)0x10000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_TTX ((uint)0x08000000)
-#define FCC_GFMR_CDP ((uint)0x04000000)
-#define FCC_GFMR_CTSP ((uint)0x02000000)
-#define FCC_GFMR_CDS ((uint)0x01000000)
-#define FCC_GFMR_CTSS ((uint)0x00800000)
-#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
-#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
-#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
-#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
-#define FCC_GFMR_RTSM ((uint)0x00002000)
-#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
-#define FCC_GFMR_REVD ((uint)0x00000400)
-#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
-#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
-#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
-#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
-#define FCC_GFMR_ENR ((uint)0x00000020)
-#define FCC_GFMR_ENT ((uint)0x00000010)
-#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
-#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
-#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
-
-/* Generic FCC parameter ram.
-*/
-typedef struct fcc_param {
- ushort fcc_riptr; /* Rx Internal temp pointer */
- ushort fcc_tiptr; /* Tx Internal temp pointer */
- ushort fcc_res1;
- ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
- uint fcc_rstate; /* Upper byte is Func code, must be set */
- uint fcc_rbase; /* Receive BD base */
- ushort fcc_rbdstat; /* RxBD status */
- ushort fcc_rbdlen; /* RxBD down counter */
- uint fcc_rdptr; /* RxBD internal data pointer */
- uint fcc_tstate; /* Upper byte is Func code, must be set */
- uint fcc_tbase; /* Transmit BD base */
- ushort fcc_tbdstat; /* TxBD status */
- ushort fcc_tbdlen; /* TxBD down counter */
- uint fcc_tdptr; /* TxBD internal data pointer */
- uint fcc_rbptr; /* Rx BD Internal buf pointer */
- uint fcc_tbptr; /* Tx BD Internal buf pointer */
- uint fcc_rcrc; /* Rx temp CRC */
- uint fcc_res2;
- uint fcc_tcrc; /* Tx temp CRC */
-} fccp_t;
-
-
-/* Ethernet controller through FCC.
-*/
-typedef struct fcc_enet {
- fccp_t fen_genfcc;
- uint fen_statbuf; /* Internal status buffer */
- uint fen_camptr; /* CAM address */
- uint fen_cmask; /* Constant mask for CRC */
- uint fen_cpres; /* Preset CRC */
- uint fen_crcec; /* CRC Error counter */
- uint fen_alec; /* alignment error counter */
- uint fen_disfc; /* discard frame counter */
- ushort fen_retlim; /* Retry limit */
- ushort fen_retcnt; /* Retry counter */
- ushort fen_pper; /* Persistence */
- ushort fen_boffcnt; /* backoff counter */
- uint fen_gaddrh; /* Group address filter, high 32-bits */
- uint fen_gaddrl; /* Group address filter, low 32-bits */
- ushort fen_tfcstat; /* out of sequence TxBD */
- ushort fen_tfclen;
- uint fen_tfcptr;
- ushort fen_mflr; /* Maximum frame length (1518) */
- ushort fen_paddrh; /* MAC address */
- ushort fen_paddrm;
- ushort fen_paddrl;
- ushort fen_ibdcount; /* Internal BD counter */
- ushort fen_ibdstart; /* Internal BD start pointer */
- ushort fen_ibdend; /* Internal BD end pointer */
- ushort fen_txlen; /* Internal Tx frame length counter */
- uint fen_ibdbase[8]; /* Internal use */
- uint fen_iaddrh; /* Individual address filter */
- uint fen_iaddrl;
- ushort fen_minflr; /* Minimum frame length (64) */
- ushort fen_taddrh; /* Filter transfer MAC address */
- ushort fen_taddrm;
- ushort fen_taddrl;
- ushort fen_padptr; /* Pointer to pad byte buffer */
- ushort fen_cftype; /* control frame type */
- ushort fen_cfrange; /* control frame range */
- ushort fen_maxb; /* maximum BD count */
- ushort fen_maxd1; /* Max DMA1 length (1520) */
- ushort fen_maxd2; /* Max DMA2 length (1520) */
- ushort fen_maxd; /* internal max DMA count */
- ushort fen_dmacnt; /* internal DMA counter */
- uint fen_octc; /* Total octect counter */
- uint fen_colc; /* Total collision counter */
- uint fen_broc; /* Total broadcast packet counter */
- uint fen_mulc; /* Total multicast packet count */
- uint fen_uspc; /* Total packets < 64 bytes */
- uint fen_frgc; /* Total packets < 64 bytes with errors */
- uint fen_ospc; /* Total packets > 1518 */
- uint fen_jbrc; /* Total packets > 1518 with errors */
- uint fen_p64c; /* Total packets == 64 bytes */
- uint fen_p65c; /* Total packets 64 < bytes <= 127 */
- uint fen_p128c; /* Total packets 127 < bytes <= 255 */
- uint fen_p256c; /* Total packets 256 < bytes <= 511 */
- uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
- uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
- uint fen_cambuf; /* Internal CAM buffer poiner */
- ushort fen_rfthr; /* Received frames threshold */
- ushort fen_rfcnt; /* Received frames count */
-} fcc_enet_t;
-
-/* FCC Event/Mask register as used by Ethernet.
-*/
-#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
-#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
-#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
-#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
-#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
-#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
-#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
-#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
-
-/* FCC Mode Register (FPSMR) as used by Ethernet.
-*/
-#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
-#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
-#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
-#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
-#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
-#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
-#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
-#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
-#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
-#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
-#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
-#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
-#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
-
-/* IIC parameter RAM.
-*/
-typedef struct iic {
- ushort iic_rbase; /* Rx Buffer descriptor base address */
- ushort iic_tbase; /* Tx Buffer descriptor base address */
- u_char iic_rfcr; /* Rx function code */
- u_char iic_tfcr; /* Tx function code */
- ushort iic_mrblr; /* Max receive buffer length */
- uint iic_rstate; /* Internal */
- uint iic_rdp; /* Internal */
- ushort iic_rbptr; /* Internal */
- ushort iic_rbc; /* Internal */
- uint iic_rxtmp; /* Internal */
- uint iic_tstate; /* Internal */
- uint iic_tdp; /* Internal */
- ushort iic_tbptr; /* Internal */
- ushort iic_tbc; /* Internal */
- uint iic_txtmp; /* Internal */
-} iic_t;
-
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res; /* Tx temp. */
- uint spi_res1[4]; /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x) ((x) &0xF)
-
-#define SPI_EB ((u_char)0x10) /* big endian byte order */
-
-#define BD_IIC_START ((ushort)0x0400)
-
-/* IDMA parameter RAM
-*/
-typedef struct idma {
- ushort ibase; /* IDMA buffer descriptor table base address */
- ushort dcm; /* DMA channel mode */
- ushort ibdptr; /* IDMA current buffer descriptor pointer */
- ushort dpr_buf; /* IDMA transfer buffer base address */
- ushort buf_inv; /* internal buffer inventory */
- ushort ss_max; /* steady-state maximum transfer size */
- ushort dpr_in_ptr; /* write pointer inside the internal buffer */
- ushort sts; /* source transfer size */
- ushort dpr_out_ptr; /* read pointer inside the internal buffer */
- ushort seob; /* source end of burst */
- ushort deob; /* destination end of burst */
- ushort dts; /* destination transfer size */
- ushort ret_add; /* return address when working in ERM=1 mode */
- ushort res0; /* reserved */
- uint bd_cnt; /* internal byte count */
- uint s_ptr; /* source internal data pointer */
- uint d_ptr; /* destination internal data pointer */
- uint istate; /* internal state */
- u_char res1[20]; /* pad to 64-byte length */
-} idma_t;
-
-/* DMA channel mode bit fields
-*/
-#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */
-#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */
-#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */
-#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */
-#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */
-#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */
-#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */
-#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */
-#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */
-#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */
-#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */
-#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */
-#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */
-#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */
-
-/* IDMA Buffer Descriptors
-*/
-typedef struct idma_bd {
- uint flags;
- uint len; /* data length */
- uint src; /* source data buffer pointer */
- uint dst; /* destination data buffer pointer */
-} idma_bd_t;
-
-/* IDMA buffer descriptor flag bit fields
-*/
-#define IDMA_BD_V ((uint)0x80000000) /* valid */
-#define IDMA_BD_W ((uint)0x20000000) /* wrap */
-#define IDMA_BD_I ((uint)0x10000000) /* interrupt */
-#define IDMA_BD_L ((uint)0x08000000) /* last */
-#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */
-#define IDMA_BD_SDN ((uint)0x00400000) /* source done */
-#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */
-#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */
-#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */
-#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */
-#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */
-#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */
-#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */
-#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */
-#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */
-
-/* per-channel IDMA registers
-*/
-typedef struct im_idma {
- u_char idsr; /* IDMAn event status register */
- u_char res0[3];
- u_char idmr; /* IDMAn event mask register */
- u_char res1[3];
-} im_idma_t;
-
-/* IDMA event register bit fields
-*/
-#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */
-#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */
-#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */
-#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */
-
-/* RISC Controller Configuration Register (RCCR) bit fields
-*/
-#define RCCR_TIME ((uint)0x80000000) /* timer enable */
-#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */
-#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */
-#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */
-#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */
-#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */
-#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */
-#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
-#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */
-#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */
-#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */
-#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
-#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */
-#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */
-#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */
-#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
-#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */
-#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */
-#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */
-#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
-#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */
-#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */
-#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */
-#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */
-#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */
-#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */
-#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */
-#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */
-#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */
-#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */
-#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */
-#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */
-#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */
-#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */
-#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */
-#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */
-#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
-#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
-
-/*-----------------------------------------------------------------------
- * CMXFCR - CMX FCC Clock Route Register
- */
-#define CMXFCR_FC1 0x40000000 /* FCC1 connection */
-#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */
-#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */
-#define CMXFCR_FC2 0x00400000 /* FCC2 connection */
-#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */
-#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */
-#define CMXFCR_FC3 0x00004000 /* FCC3 connection */
-#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */
-#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */
-
-#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */
-#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */
-#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */
-#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */
-#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */
-#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */
-#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */
-#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */
-#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */
-#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */
-#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */
-#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */
-#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */
-#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */
-#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */
-
-#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */
-#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */
-#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */
-#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */
-#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */
-#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */
-#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */
-#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */
-#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */
-#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */
-#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */
-#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */
-#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */
-#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */
-#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */
-
-#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */
-#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */
-#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */
-#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */
-#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */
-#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */
-#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */
-#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */
-
-#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */
-#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */
-#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */
-#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */
-#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */
-#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */
-#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */
-#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */
-
-/*-----------------------------------------------------------------------
- * CMXSCR - CMX SCC Clock Route Register
- */
-#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */
-#define CMXSCR_SC1 0x40000000 /* SCC1 connection */
-#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */
-#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */
-#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */
-#define CMXSCR_SC2 0x00400000 /* SCC2 connection */
-#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */
-#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */
-#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */
-#define CMXSCR_SC3 0x00004000 /* SCC3 connection */
-#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */
-#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */
-#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */
-#define CMXSCR_SC4 0x00000040 /* SCC4 connection */
-#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */
-#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */
-
-#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */
-#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */
-#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */
-#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */
-#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */
-#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */
-#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */
-#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */
-#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */
-#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */
-#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */
-#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */
-#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */
-#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */
-#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */
-#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */
-#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */
-#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */
-#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */
-#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */
-#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */
-#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */
-
-#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */
-#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */
-#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */
-#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */
-#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */
-#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */
-#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */
-#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */
-
-#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */
-#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */
-#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */
-#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */
-#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */
-#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */
-#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */
-#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */
-#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */
-#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */
-#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */
-#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */
-#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */
-#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */
-#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */
-
-#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */
-#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */
-#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */
-#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */
-#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */
-#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */
-#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */
-#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */
-
-#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */
-#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */
-#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */
-#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */
-#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */
-#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */
-#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */
-#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration Register 4-31
- */
-#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */
-#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */
-#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */
-#define SIUMCR_CDIS 0x10000000 /* Core Disable */
-#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/
-#define SIUMCR_DPPC01 0x04000000 /* - " - */
-#define SIUMCR_DPPC10 0x08000000 /* - " - */
-#define SIUMCR_DPPC11 0x0c000000 /* - " - */
-#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */
-#define SIUMCR_L2CPC01 0x01000000 /* - " - */
-#define SIUMCR_L2CPC10 0x02000000 /* - " - */
-#define SIUMCR_L2CPC11 0x03000000 /* - " - */
-#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */
-#define SIUMCR_LBPC01 0x00400000 /* - " - */
-#define SIUMCR_LBPC10 0x00800000 /* - " - */
-#define SIUMCR_LBPC11 0x00c00000 /* - " - */
-#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/
-#define SIUMCR_APPC01 0x00100000 /* - " - */
-#define SIUMCR_APPC10 0x00200000 /* - " - */
-#define SIUMCR_APPC11 0x00300000 /* - " - */
-#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */
-#define SIUMCR_CS10PC01 0x00040000 /* - " - */
-#define SIUMCR_CS10PC10 0x00080000 /* - " - */
-#define SIUMCR_CS10PC11 0x000c0000 /* - " - */
-#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */
-#define SIUMCR_BCTLC01 0x00010000 /* - " - */
-#define SIUMCR_BCTLC10 0x00020000 /* - " - */
-#define SIUMCR_BCTLC11 0x00030000 /* - " - */
-#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */
-#define SIUMCR_MMR01 0x00004000 /* - " - */
-#define SIUMCR_MMR10 0x00008000 /* - " - */
-#define SIUMCR_MMR11 0x0000c000 /* - " - */
-#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control Register 9-8
-*/
-#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */
-#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */
-#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */
-#define SCCR_PCIDF_SHIFT 3
-
-#ifndef CPM_IMMR_OFFSET
-#define CPM_IMMR_OFFSET 0x101a8
-#endif
-
-#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
-
-/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
- * in order to use clock-computing stuff below for the FCC x
- */
-
-/* Automatically generates register configurations */
-#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK ((uint)0xff000000)
-
-#define PC_F2RXCLK PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK ((uint)0x00ff0000)
-
-#define PC_F3RXCLK PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK ((uint)0x0000ff00)
-
-#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
-#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
-
-#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
-
-/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL 0x00000001U
-#define PA1_CRS 0x00000002U
-#define PA1_TXER 0x00000004U
-#define PA1_TXEN 0x00000008U
-#define PA1_RXDV 0x00000010U
-#define PA1_RXER 0x00000020U
-#define PA1_TXDAT 0x00003c00U
-#define PA1_RXDAT 0x0003c000U
-#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
- PA1_RXDV | PA1_RXER)
-#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER 0x00000001U
-#define PB2_RXDV 0x00000002U
-#define PB2_TXEN 0x00000004U
-#define PB2_RXER 0x00000008U
-#define PB2_COL 0x00000010U
-#define PB2_CRS 0x00000020U
-#define PB2_TXDAT 0x000003c0U
-#define PB2_RXDAT 0x00003c00U
-#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
- PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB1 (PB2_TXEN)
-#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV 0x00004000U
-#define PB3_RXER 0x00008000U
-#define PB3_TXER 0x00010000U
-#define PB3_TXEN 0x00020000U
-#define PB3_COL 0x00040000U
-#define PB3_CRS 0x00080000U
-#define PB3_TXDAT 0x0f000000U
-#define PC3_TXDAT 0x00000010U
-#define PB3_RXDAT 0x00f00000U
-#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
- PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB1 0
-#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER)
-#define PC3_DIRC1 (PC3_TXDAT)
-
-/* Handy macro to specify mem for FCCs*/
-#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
-#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
-#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
-#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
-
-/* Clocks and GRG's */
-
-enum cpm_clk_dir {
- CPM_CLK_RX,
- CPM_CLK_TX,
- CPM_CLK_RTX
-};
-
-enum cpm_clk_target {
- CPM_CLK_SCC1,
- CPM_CLK_SCC2,
- CPM_CLK_SCC3,
- CPM_CLK_SCC4,
- CPM_CLK_FCC1,
- CPM_CLK_FCC2,
- CPM_CLK_FCC3
-};
-
-enum cpm_clk {
- CPM_CLK_NONE = 0,
- CPM_BRG1, /* Baud Rate Generator 1 */
- CPM_BRG2, /* Baud Rate Generator 2 */
- CPM_BRG3, /* Baud Rate Generator 3 */
- CPM_BRG4, /* Baud Rate Generator 4 */
- CPM_BRG5, /* Baud Rate Generator 5 */
- CPM_BRG6, /* Baud Rate Generator 6 */
- CPM_BRG7, /* Baud Rate Generator 7 */
- CPM_BRG8, /* Baud Rate Generator 8 */
- CPM_CLK1, /* Clock 1 */
- CPM_CLK2, /* Clock 2 */
- CPM_CLK3, /* Clock 3 */
- CPM_CLK4, /* Clock 4 */
- CPM_CLK5, /* Clock 5 */
- CPM_CLK6, /* Clock 6 */
- CPM_CLK7, /* Clock 7 */
- CPM_CLK8, /* Clock 8 */
- CPM_CLK9, /* Clock 9 */
- CPM_CLK10, /* Clock 10 */
- CPM_CLK11, /* Clock 11 */
- CPM_CLK12, /* Clock 12 */
- CPM_CLK13, /* Clock 13 */
- CPM_CLK14, /* Clock 14 */
- CPM_CLK15, /* Clock 15 */
- CPM_CLK16, /* Clock 16 */
- CPM_CLK17, /* Clock 17 */
- CPM_CLK18, /* Clock 18 */
- CPM_CLK19, /* Clock 19 */
- CPM_CLK20, /* Clock 20 */
- CPM_CLK_DUMMY
-};
-
-extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
-
-#endif /* __CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/delay.h b/include/asm-ppc/delay.h
deleted file mode 100644
index badde6845af2..000000000000
--- a/include/asm-ppc/delay.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_DELAY_H
-#define _PPC_DELAY_H
-
-#include <asm/param.h>
-
-/*
- * Copyright 1996, Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-extern unsigned long loops_per_jiffy;
-
-extern void __delay(unsigned int loops);
-
-/*
- * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
- * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
- *
- * The mulhwu instruction gives us loops = (a * b) / 2^32.
- * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
- * because this lets us support a wide range of HZ and
- * loops_per_jiffy values without either a or b overflowing 2^32.
- * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
- * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
- * (which corresponds to ~3800 bogomips at HZ = 100).
- * -- paulus
- */
-#define __MAX_UDELAY (226050910UL/HZ) /* maximum udelay argument */
-#define __MAX_NDELAY (4294967295UL/HZ) /* maximum ndelay argument */
-
-extern __inline__ void __udelay(unsigned int x)
-{
- unsigned int loops;
-
- __asm__("mulhwu %0,%1,%2" : "=r" (loops) :
- "r" (x), "r" (loops_per_jiffy * 226));
- __delay(loops);
-}
-
-extern __inline__ void __ndelay(unsigned int x)
-{
- unsigned int loops;
-
- __asm__("mulhwu %0,%1,%2" : "=r" (loops) :
- "r" (x), "r" (loops_per_jiffy * 5));
- __delay(loops);
-}
-
-extern void __bad_udelay(void); /* deliberately undefined */
-extern void __bad_ndelay(void); /* deliberately undefined */
-
-#define udelay(n) (__builtin_constant_p(n)? \
- ((n) > __MAX_UDELAY? __bad_udelay(): __udelay((n) * (19 * HZ))) : \
- __udelay((n) * (19 * HZ)))
-
-#define ndelay(n) (__builtin_constant_p(n)? \
- ((n) > __MAX_NDELAY? __bad_ndelay(): __ndelay((n) * HZ)) : \
- __ndelay((n) * HZ))
-
-#endif /* defined(_PPC_DELAY_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/device.h b/include/asm-ppc/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-ppc/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-ppc/floppy.h b/include/asm-ppc/floppy.h
deleted file mode 100644
index 7d9b3f430d92..000000000000
--- a/include/asm-ppc/floppy.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_FLOPPY_H
-#define __ASM_PPC_FLOPPY_H
-
-#define fd_inb(port) inb_p(port)
-#define fd_outb(value,port) outb_p(value,port)
-
-#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA)
-#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA)
-#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA)
-#define fd_dma_setup(addr, size, mode, io) fd_ops->_dma_setup(addr, size, mode, io)
-#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
-#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL);
-
-static int fd_request_dma(void);
-
-struct fd_dma_ops {
- void (*_disable_dma)(unsigned int dmanr);
- void (*_free_dma)(unsigned int dmanr);
- int (*_get_dma_residue)(unsigned int dummy);
- int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-};
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_vdma;
-static struct fd_dma_ops *fd_ops;
-
-static irqreturn_t floppy_hardint(int irq, void *dev_id)
-{
- unsigned char st;
- int lcount;
- char *lptr;
-
- if (!doing_vdma)
- return floppy_interrupt(irq, dev_id);
-
-
- st = 1;
- for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if (st != 0xa0)
- break;
- if (virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
-
- if (st == 0x20)
- return IRQ_HANDLED;
- if (!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
- doing_vdma = 0;
- floppy_interrupt(irq, dev_id);
- return IRQ_HANDLED;
- }
- return IRQ_HANDLED;
-}
-
-static void vdma_disable_dma(unsigned int dummy)
-{
- doing_vdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
- if (can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
- else
- return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
-}
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_vdma = 1;
- virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- /* actual, physical DMA */
- doing_vdma = 0;
- clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,(unsigned int)virt_to_bus(addr));
- set_dma_count(FLOPPY_DMA,size);
- enable_dma(FLOPPY_DMA);
- return 0;
-}
-
-static struct fd_dma_ops real_dma_ops =
-{
- ._disable_dma = disable_dma,
- ._free_dma = free_dma,
- ._get_dma_residue = get_dma_residue,
- ._dma_setup = hard_dma_setup
-};
-
-static struct fd_dma_ops virt_dma_ops =
-{
- ._disable_dma = vdma_disable_dma,
- ._free_dma = vdma_nop,
- ._get_dma_residue = vdma_get_dma_residue,
- ._dma_setup = vdma_dma_setup
-};
-
-static int fd_request_dma()
-{
- if (can_use_virtual_dma & 1) {
- fd_ops = &virt_dma_ops;
- return 0;
- }
- else {
- fd_ops = &real_dma_ops;
- return request_dma(FLOPPY_DMA, "floppy");
- }
-}
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Again, the CMOS information not available
- */
-#define FLOPPY0_TYPE 6
-#define FLOPPY1_TYPE 0
-
-#define N_FDC 2 /* Don't change this! */
-#define N_DRIVE 8
-
-/*
- * The PowerPC has no problems with floppy DMA crossing 64k borders.
- */
-#define CROSS_64KB(a,s) (0)
-
-#endif /* __ASM_PPC_FLOPPY_H */
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/fs_pd.h b/include/asm-ppc/fs_pd.h
deleted file mode 100644
index 8691327653af..000000000000
--- a/include/asm-ppc/fs_pd.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Platform information definitions.
- *
- * 2006 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef FS_PD_H
-#define FS_PD_H
-
-static inline int uart_baudrate(void)
-{
- int baud;
- bd_t *bd = (bd_t *) __res;
-
- if (bd->bi_baudrate)
- baud = bd->bi_baudrate;
- else
- baud = -1;
- return baud;
-}
-
-static inline int uart_clock(void)
-{
- return (((bd_t *) __res)->bi_intfreq);
-}
-
-#define cpm2_map(member) (&cpm2_immr->member)
-#define cpm2_map_size(member, size) (&cpm2_immr->member)
-#define cpm2_unmap(addr) do {} while(0)
-
-#endif
diff --git a/include/asm-ppc/gg2.h b/include/asm-ppc/gg2.h
deleted file mode 100644
index 341ae55b99fb..000000000000
--- a/include/asm-ppc/gg2.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions
- *
- * Copyright (C) 1997 Geert Uytterhoeven
- *
- * This file is based on the following documentation:
- *
- * The VAS96011/12 Chipset, Data Book, Edition 1.0
- * VLSI Technology, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASMPPC_GG2_H
-#define _ASMPPC_GG2_H
-
- /*
- * Memory Map (CHRP mode)
- */
-
-#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */
-#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */
-#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */
-#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */
-#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */
- /* special PCI cycles */
-#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */
-#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */
-
-
- /*
- * GG2 specific PCI Registers
- */
-
-extern void __iomem *gg2_pci_config_base; /* kernel virtual address */
-
-#define GG2_PCI_BUSNO 0x40 /* Bus number */
-#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */
-#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */
-#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */
-#define GG2_PCI_ADDR_MAP 0x5c /* Address map */
-#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */
-#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */
-#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */
-#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */
-#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */
-#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */
-#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */
-#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */
-#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */
-#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */
-#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */
-#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */
-#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */
-#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */
-#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */
- /* Cleared when read */
-
-#endif /* _ASMPPC_GG2_H */
diff --git a/include/asm-ppc/gt64260.h b/include/asm-ppc/gt64260.h
deleted file mode 100644
index 9e63b3cfffca..000000000000
--- a/include/asm-ppc/gt64260.h
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * include/asm-ppc/gt64260.h
- *
- * Prototypes, etc. for the Marvell/Galileo GT64260 host bridge routines.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_GT64260_H
-#define __ASMPPC_GT64260_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/gt64260_defs.h>
-
-
-extern u32 gt64260_base;
-extern u32 gt64260_irq_base; /* We handle the next 96 IRQs from here */
-extern u32 gt64260_revision;
-extern u8 gt64260_pci_exclude_bridge;
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/* IRQs defined by the 64260 */
-#define GT64260_IRQ_MPSC0 40
-#define GT64260_IRQ_MPSC1 42
-#define GT64260_IRQ_SDMA 36
-
-/*
- * Define a default physical memory map to be set up on the bridge.
- * Also define a struct to pass that info from board-specific routines to
- * GT64260 generic set up routines. By passing this info in, the board
- * support developer can modify it at will.
- */
-
-/*
- * This is the default memory map:
- * CPU PCI
- * --- ---
- * PCI 0 I/O: 0xfa000000-0xfaffffff 0x00000000-0x00ffffff
- * PCI 1 I/O: 0xfb000000-0xfbffffff 0x01000000-0x01ffffff
- * PCI 0 MEM: 0x80000000-0x8fffffff 0x80000000-0x8fffffff
- * PCI 1 MEM: 0x90000000-0x9fffffff 0x90000000-0x9fffffff
- */
-
-/* Default physical memory map for the GT64260 bridge */
-
-/*
- * PCI Bus 0 Definitions
- */
-#define GT64260_PCI_0_IO_SIZE 0x01000000U
-#define GT64260_PCI_0_MEM_SIZE 0x10000000U
-
-/* Processor Physical addresses */
-#define GT64260_PCI_0_IO_START_PROC 0xfa000000U
-#define GT64260_PCI_0_IO_END_PROC (GT64260_PCI_0_IO_START_PROC + \
- GT64260_PCI_0_IO_SIZE - 1)
-
-/* PCI 0 addresses */
-#define GT64260_PCI_0_IO_START 0x00000000U
-#define GT64260_PCI_0_IO_END (GT64260_PCI_0_IO_START + \
- GT64260_PCI_0_IO_SIZE - 1)
-
-/* Processor Physical addresses */
-#define GT64260_PCI_0_MEM_START_PROC 0x80000000U
-#define GT64260_PCI_0_MEM_END_PROC (GT64260_PCI_0_MEM_START_PROC + \
- GT64260_PCI_0_MEM_SIZE - 1)
-
-/* PCI 0 addresses */
-#define GT64260_PCI_0_MEM_START 0x80000000U
-#define GT64260_PCI_0_MEM_END (GT64260_PCI_0_MEM_START + \
- GT64260_PCI_0_MEM_SIZE - 1)
-
-/*
- * PCI Bus 1 Definitions
- */
-#define GT64260_PCI_1_IO_SIZE 0x01000000U
-#define GT64260_PCI_1_MEM_SIZE 0x10000000U
-
-/* PCI 1 addresses */
-#define GT64260_PCI_1_IO_START 0x01000000U
-#define GT64260_PCI_1_IO_END (GT64260_PCI_1_IO_START + \
- GT64260_PCI_1_IO_SIZE - 1)
-
-/* Processor Physical addresses */
-#define GT64260_PCI_1_IO_START_PROC 0xfb000000U
-#define GT64260_PCI_1_IO_END_PROC (GT64260_PCI_1_IO_START_PROC + \
- GT64260_PCI_1_IO_SIZE - 1)
-
-/* PCI 1 addresses */
-#define GT64260_PCI_1_MEM_START 0x90000000U
-#define GT64260_PCI_1_MEM_END (GT64260_PCI_1_MEM_START + \
- GT64260_PCI_1_MEM_SIZE - 1)
-
-/* Processor Physical addresses */
-#define GT64260_PCI_1_MEM_START_PROC 0x90000000U
-#define GT64260_PCI_1_MEM_END_PROC (GT64260_PCI_1_MEM_START_PROC + \
- GT64260_PCI_1_MEM_SIZE - 1)
-
-/* Define struct to pass mem-map info into gt64260_common.c code */
-typedef struct {
- struct pci_controller *hose_a;
- struct pci_controller *hose_b;
-
- u32 mem_size;
-
- u32 pci_0_io_start_proc;
- u32 pci_0_io_start_pci;
- u32 pci_0_io_size;
- u32 pci_0_io_swap;
-
- u32 pci_0_mem_start_proc;
- u32 pci_0_mem_start_pci_hi;
- u32 pci_0_mem_start_pci_lo;
- u32 pci_0_mem_size;
- u32 pci_0_mem_swap;
-
- u32 pci_1_io_start_proc;
- u32 pci_1_io_start_pci;
- u32 pci_1_io_size;
- u32 pci_1_io_swap;
-
- u32 pci_1_mem_start_proc;
- u32 pci_1_mem_start_pci_hi;
- u32 pci_1_mem_start_pci_lo;
- u32 pci_1_mem_size;
- u32 pci_1_mem_swap;
-} gt64260_bridge_info_t;
-
-#define GT64260_BRIDGE_INFO_DEFAULT(ip, ms) { \
- (ip)->mem_size = (ms); \
- \
- (ip)->pci_0_io_start_proc = GT64260_PCI_0_IO_START_PROC; \
- (ip)->pci_0_io_start_pci = GT64260_PCI_0_IO_START; \
- (ip)->pci_0_io_size = GT64260_PCI_0_IO_SIZE; \
- (ip)->pci_0_io_swap = GT64260_CPU_PCI_SWAP_NONE; \
- \
- (ip)->pci_0_mem_start_proc = GT64260_PCI_0_MEM_START_PROC; \
- (ip)->pci_0_mem_start_pci_hi = 0x00000000; \
- (ip)->pci_0_mem_start_pci_lo = GT64260_PCI_0_MEM_START; \
- (ip)->pci_0_mem_size = GT64260_PCI_0_MEM_SIZE; \
- (ip)->pci_0_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \
- \
- (ip)->pci_1_io_start_proc = GT64260_PCI_1_IO_START_PROC; \
- (ip)->pci_1_io_start_pci = GT64260_PCI_1_IO_START; \
- (ip)->pci_1_io_size = GT64260_PCI_1_IO_SIZE; \
- (ip)->pci_1_io_swap = GT64260_CPU_PCI_SWAP_NONE; \
- \
- (ip)->pci_1_mem_start_proc = GT64260_PCI_1_MEM_START_PROC; \
- (ip)->pci_1_mem_start_pci_hi = 0x00000000; \
- (ip)->pci_1_mem_start_pci_lo = GT64260_PCI_1_MEM_START; \
- (ip)->pci_1_mem_size = GT64260_PCI_1_MEM_SIZE; \
- (ip)->pci_1_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \
-}
-
-/*
- *****************************************************************************
- *
- * I/O macros to access the 64260's registers
- *
- *****************************************************************************
- */
-
-extern inline uint32_t gt_read(uint32_t offs){
- return (in_le32((volatile uint *)(gt64260_base + offs)));
-}
-extern inline void gt_write(uint32_t offs, uint32_t d){
- out_le32((volatile uint *)(gt64260_base + offs), d);
-}
-
-#if 0 /* paranoid SMP version */
-extern inline void gt_modify(u32 offs, u32 data, u32 mask) \
-{
- uint32_t reg;
- spin_lock(&gt64260_lock);
- reg = gt_read(offs) & (~mask); /* zero any bits we care about*/
- reg |= data & mask; /* set bits from the data */
- gt_write(offs, reg);
- spin_unlock(&gt64260_lock);
-}
-#else
-extern inline void gt_modify(uint32_t offs, uint32_t data, uint32_t mask)
-{
- uint32_t reg;
- reg = gt_read(offs) & (~(mask)); /* zero any bits we care about*/
- reg |= (data) & (mask); /* set bits from the data */
- gt_write(offs, reg);
-}
-#endif
-#define gt_set_bits(offs, bits) gt_modify(offs, ~0, bits)
-
-#define gt_clr_bits(offs, bits) gt_modify(offs, 0, bits)
-
-
-/*
- *****************************************************************************
- *
- * Function Prototypes
- *
- *****************************************************************************
- */
-
-int gt64260_find_bridges(u32 phys_base_addr, gt64260_bridge_info_t *info,
- int ((*map_irq)(struct pci_dev *, unsigned char, unsigned char)));
-int gt64260_bridge_init(gt64260_bridge_info_t *info);
-int gt64260_cpu_scs_set_window(u32 window,
- u32 base_addr,
- u32 size);
-int gt64260_cpu_cs_set_window(u32 window,
- u32 base_addr,
- u32 size);
-int gt64260_cpu_boot_set_window(u32 base_addr,
- u32 size);
-int gt64260_cpu_set_pci_io_window(u32 pci_bus,
- u32 cpu_base_addr,
- u32 pci_base_addr,
- u32 size,
- u32 swap);
-int gt64260_cpu_set_pci_mem_window(u32 pci_bus,
- u32 window,
- u32 cpu_base_addr,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 size,
- u32 swap_64bit);
-int gt64260_cpu_prot_set_window(u32 window,
- u32 base_addr,
- u32 size,
- u32 access_bits);
-int gt64260_cpu_snoop_set_window(u32 window,
- u32 base_addr,
- u32 size,
- u32 snoop_type);
-void gt64260_cpu_disable_all_windows(void);
-int gt64260_pci_bar_enable(u32 pci_bus, u32 enable_bits);
-int gt64260_pci_slave_scs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_cs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_boot_set_window(struct pci_controller *hose,
- u32 pci_base_addr,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_p2p_mem_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr,
- u32 other_bus_base_addr,
- u32 size);
-int gt64260_pci_slave_p2p_io_set_window(struct pci_controller *hose,
- u32 pci_base_addr,
- u32 other_bus_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_scs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_cs_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_boot_set_window(struct pci_controller *hose,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 cpu_base_addr,
- u32 size);
-int gt64260_pci_slave_dac_p2p_mem_set_window(struct pci_controller *hose,
- u32 window,
- u32 pci_base_addr_hi,
- u32 pci_base_addr_lo,
- u32 other_bus_base_addr,
- u32 size);
-int gt64260_pci_acc_cntl_set_window(u32 pci_bus,
- u32 window,
- u32 base_addr_hi,
- u32 base_addr_lo,
- u32 size,
- u32 features);
-int gt64260_pci_snoop_set_window(u32 pci_bus,
- u32 window,
- u32 base_addr_hi,
- u32 base_addr_lo,
- u32 size,
- u32 snoop_type);
-int gt64260_set_base(u32 new_base);
-int gt64260_get_base(u32 *base);
-int gt64260_pci_exclude_device(u8 bus, u8 devfn);
-
-void gt64260_init_irq(void);
-int gt64260_get_irq(void);
-
-void gt64260_mpsc_progress(char *s, unsigned short hex);
-
-#endif /* __ASMPPC_GT64260_H */
diff --git a/include/asm-ppc/gt64260_defs.h b/include/asm-ppc/gt64260_defs.h
deleted file mode 100644
index 6ffd01a5373e..000000000000
--- a/include/asm-ppc/gt64260_defs.h
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*
- * include/asm-ppc/gt64260_defs.h
- *
- * Register definitions for the Marvell/Galileo GT64260 host bridge.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_GT64260_DEFS_H
-#define __ASMPPC_GT64260_DEFS_H
-
-/*
- * Define a macro to represent the supported version of the 64260.
- */
-#define GT64260 0x01
-#define GT64260A 0x10
-
-/*
- *****************************************************************************
- *
- * CPU Interface Registers
- *
- *****************************************************************************
- */
-
-/* CPU physical address of 64260's registers */
-#define GT64260_INTERNAL_SPACE_DECODE 0x0068
-#define GT64260_INTERNAL_SPACE_SIZE 0x10000
-#define GT64260_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000
-
-/* CPU Memory Controller Window Registers (4 windows) */
-#define GT64260_CPU_SCS_DECODE_WINDOWS 4
-
-#define GT64260_CPU_SCS_DECODE_0_BOT 0x0008
-#define GT64260_CPU_SCS_DECODE_0_TOP 0x0010
-#define GT64260_CPU_SCS_DECODE_1_BOT 0x0208
-#define GT64260_CPU_SCS_DECODE_1_TOP 0x0210
-#define GT64260_CPU_SCS_DECODE_2_BOT 0x0018
-#define GT64260_CPU_SCS_DECODE_2_TOP 0x0020
-#define GT64260_CPU_SCS_DECODE_3_BOT 0x0218
-#define GT64260_CPU_SCS_DECODE_3_TOP 0x0220
-
-/* CPU Device Controller Window Registers (4 windows) */
-#define GT64260_CPU_CS_DECODE_WINDOWS 4
-
-#define GT64260_CPU_CS_DECODE_0_BOT 0x0028
-#define GT64260_CPU_CS_DECODE_0_TOP 0x0030
-#define GT64260_CPU_CS_DECODE_1_BOT 0x0228
-#define GT64260_CPU_CS_DECODE_1_TOP 0x0230
-#define GT64260_CPU_CS_DECODE_2_BOT 0x0248
-#define GT64260_CPU_CS_DECODE_2_TOP 0x0250
-#define GT64260_CPU_CS_DECODE_3_BOT 0x0038
-#define GT64260_CPU_CS_DECODE_3_TOP 0x0040
-
-#define GT64260_CPU_BOOT_CS_DECODE_0_BOT 0x0238
-#define GT64260_CPU_BOOT_CS_DECODE_0_TOP 0x0240
-
-/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
-#define GT64260_PCI_BUSES 2
-#define GT64260_PCI_IO_WINDOWS_PER_BUS 1
-#define GT64260_PCI_MEM_WINDOWS_PER_BUS 4
-
-#define GT64260_CPU_PCI_SWAP_BYTE 0x00000000
-#define GT64260_CPU_PCI_SWAP_NONE 0x01000000
-#define GT64260_CPU_PCI_SWAP_BYTE_WORD 0x02000000
-#define GT64260_CPU_PCI_SWAP_WORD 0x03000000
-#define GT64260_CPU_PCI_SWAP_MASK 0x07000000
-
-#define GT64260_CPU_PCI_MEM_REQ64 (1<<27)
-
-#define GT64260_CPU_PCI_0_IO_DECODE_BOT 0x0048
-#define GT64260_CPU_PCI_0_IO_DECODE_TOP 0x0050
-#define GT64260_CPU_PCI_0_MEM_0_DECODE_BOT 0x0058
-#define GT64260_CPU_PCI_0_MEM_0_DECODE_TOP 0x0060
-#define GT64260_CPU_PCI_0_MEM_1_DECODE_BOT 0x0080
-#define GT64260_CPU_PCI_0_MEM_1_DECODE_TOP 0x0088
-#define GT64260_CPU_PCI_0_MEM_2_DECODE_BOT 0x0258
-#define GT64260_CPU_PCI_0_MEM_2_DECODE_TOP 0x0260
-#define GT64260_CPU_PCI_0_MEM_3_DECODE_BOT 0x0280
-#define GT64260_CPU_PCI_0_MEM_3_DECODE_TOP 0x0288
-
-#define GT64260_CPU_PCI_0_IO_REMAP 0x00f0
-#define GT64260_CPU_PCI_0_MEM_0_REMAP_LO 0x00f8
-#define GT64260_CPU_PCI_0_MEM_0_REMAP_HI 0x0320
-#define GT64260_CPU_PCI_0_MEM_1_REMAP_LO 0x0100
-#define GT64260_CPU_PCI_0_MEM_1_REMAP_HI 0x0328
-#define GT64260_CPU_PCI_0_MEM_2_REMAP_LO 0x02f8
-#define GT64260_CPU_PCI_0_MEM_2_REMAP_HI 0x0330
-#define GT64260_CPU_PCI_0_MEM_3_REMAP_LO 0x0300
-#define GT64260_CPU_PCI_0_MEM_3_REMAP_HI 0x0338
-
-#define GT64260_CPU_PCI_1_IO_DECODE_BOT 0x0090
-#define GT64260_CPU_PCI_1_IO_DECODE_TOP 0x0098
-#define GT64260_CPU_PCI_1_MEM_0_DECODE_BOT 0x00a0
-#define GT64260_CPU_PCI_1_MEM_0_DECODE_TOP 0x00a8
-#define GT64260_CPU_PCI_1_MEM_1_DECODE_BOT 0x00b0
-#define GT64260_CPU_PCI_1_MEM_1_DECODE_TOP 0x00b8
-#define GT64260_CPU_PCI_1_MEM_2_DECODE_BOT 0x02a0
-#define GT64260_CPU_PCI_1_MEM_2_DECODE_TOP 0x02a8
-#define GT64260_CPU_PCI_1_MEM_3_DECODE_BOT 0x02b0
-#define GT64260_CPU_PCI_1_MEM_3_DECODE_TOP 0x02b8
-
-#define GT64260_CPU_PCI_1_IO_REMAP 0x0108
-#define GT64260_CPU_PCI_1_MEM_0_REMAP_LO 0x0110
-#define GT64260_CPU_PCI_1_MEM_0_REMAP_HI 0x0340
-#define GT64260_CPU_PCI_1_MEM_1_REMAP_LO 0x0118
-#define GT64260_CPU_PCI_1_MEM_1_REMAP_HI 0x0348
-#define GT64260_CPU_PCI_1_MEM_2_REMAP_LO 0x0310
-#define GT64260_CPU_PCI_1_MEM_2_REMAP_HI 0x0350
-#define GT64260_CPU_PCI_1_MEM_3_REMAP_LO 0x0318
-#define GT64260_CPU_PCI_1_MEM_3_REMAP_HI 0x0358
-
-/* CPU Control Registers */
-#define GT64260_CPU_CONFIG 0x0000
-#define GT64260_CPU_MODE 0x0120
-#define GT64260_CPU_MASTER_CNTL 0x0160
-#define GT64260_CPU_XBAR_CNTL_LO 0x0150
-#define GT64260_CPU_XBAR_CNTL_HI 0x0158
-#define GT64260_CPU_XBAR_TO 0x0168
-#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170
-#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178
-
-/* CPU Sync Barrier Registers */
-#define GT64260_CPU_SYNC_BARRIER_PCI_0 0x00c0
-#define GT64260_CPU_SYNC_BARRIER_PCI_1 0x00c8
-
-/* CPU Access Protection Registers */
-#define GT64260_CPU_PROT_WINDOWS 8
-
-#define GT64260_CPU_PROT_ACCPROTECT (1<<16)
-#define GT64260_CPU_PROT_WRPROTECT (1<<17)
-#define GT64260_CPU_PROT_CACHEPROTECT (1<<18)
-
-#define GT64260_CPU_PROT_BASE_0 0x0180
-#define GT64260_CPU_PROT_TOP_0 0x0188
-#define GT64260_CPU_PROT_BASE_1 0x0190
-#define GT64260_CPU_PROT_TOP_1 0x0198
-#define GT64260_CPU_PROT_BASE_2 0x01a0
-#define GT64260_CPU_PROT_TOP_2 0x01a8
-#define GT64260_CPU_PROT_BASE_3 0x01b0
-#define GT64260_CPU_PROT_TOP_3 0x01b8
-#define GT64260_CPU_PROT_BASE_4 0x01c0
-#define GT64260_CPU_PROT_TOP_4 0x01c8
-#define GT64260_CPU_PROT_BASE_5 0x01d0
-#define GT64260_CPU_PROT_TOP_5 0x01d8
-#define GT64260_CPU_PROT_BASE_6 0x01e0
-#define GT64260_CPU_PROT_TOP_6 0x01e8
-#define GT64260_CPU_PROT_BASE_7 0x01f0
-#define GT64260_CPU_PROT_TOP_7 0x01f8
-
-/* CPU Snoop Control Registers */
-#define GT64260_CPU_SNOOP_WINDOWS 4
-
-#define GT64260_CPU_SNOOP_NONE 0x00000000
-#define GT64260_CPU_SNOOP_WT 0x00010000
-#define GT64260_CPU_SNOOP_WB 0x00020000
-#define GT64260_CPU_SNOOP_MASK 0x00030000
-#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK
-
-#define GT64260_CPU_SNOOP_BASE_0 0x0380
-#define GT64260_CPU_SNOOP_TOP_0 0x0388
-#define GT64260_CPU_SNOOP_BASE_1 0x0390
-#define GT64260_CPU_SNOOP_TOP_1 0x0398
-#define GT64260_CPU_SNOOP_BASE_2 0x03a0
-#define GT64260_CPU_SNOOP_TOP_2 0x03a8
-#define GT64260_CPU_SNOOP_BASE_3 0x03b0
-#define GT64260_CPU_SNOOP_TOP_3 0x03b8
-
-/* CPU Error Report Registers */
-#define GT64260_CPU_ERR_ADDR_LO 0x0070
-#define GT64260_CPU_ERR_ADDR_HI 0x0078
-#define GT64260_CPU_ERR_DATA_LO 0x0128
-#define GT64260_CPU_ERR_DATA_HI 0x0130
-#define GT64260_CPU_ERR_PARITY 0x0138
-#define GT64260_CPU_ERR_CAUSE 0x0140
-#define GT64260_CPU_ERR_MASK 0x0148
-
-
-/*
- *****************************************************************************
- *
- * SDRAM Cotnroller Registers
- *
- *****************************************************************************
- */
-
-/* SDRAM Config Registers */
-#define GT64260_SDRAM_CONFIG 0x0448
-#define GT64260_SDRAM_OPERATION_MODE 0x0474
-#define GT64260_SDRAM_ADDR_CNTL 0x047c
-#define GT64260_SDRAM_TIMING_PARAMS 0x04b4
-#define GT64260_SDRAM_UMA_CNTL 0x04a4
-#define GT64260_SDRAM_XBAR_CNTL_LO 0x04a8
-#define GT64260_SDRAM_XBAR_CNTL_HI 0x04ac
-#define GT64260_SDRAM_XBAR_CNTL_TO 0x04b0
-
-/* SDRAM Banks Parameters Registers */
-#define GT64260_SDRAM_BANK_PARAMS_0 0x044c
-#define GT64260_SDRAM_BANK_PARAMS_1 0x0450
-#define GT64260_SDRAM_BANK_PARAMS_2 0x0454
-#define GT64260_SDRAM_BANK_PARAMS_3 0x0458
-
-/* SDRAM Error Report Registers */
-#define GT64260_SDRAM_ERR_DATA_LO 0x0484
-#define GT64260_SDRAM_ERR_DATA_HI 0x0480
-#define GT64260_SDRAM_ERR_ADDR 0x0490
-#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488
-#define GT64260_SDRAM_ERR_ECC_CALC 0x048c
-#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494
-#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498
-
-
-/*
- *****************************************************************************
- *
- * Device/BOOT Cotnroller Registers
- *
- *****************************************************************************
- */
-
-/* Device Control Registers */
-#define GT64260_DEV_BANK_PARAMS_0 0x045c
-#define GT64260_DEV_BANK_PARAMS_1 0x0460
-#define GT64260_DEV_BANK_PARAMS_2 0x0464
-#define GT64260_DEV_BANK_PARAMS_3 0x0468
-#define GT64260_DEV_BOOT_PARAMS 0x046c
-#define GT64260_DEV_IF_CNTL 0x04c0
-#define GT64260_DEV_IF_XBAR_CNTL_LO 0x04c8
-#define GT64260_DEV_IF_XBAR_CNTL_HI 0x04cc
-#define GT64260_DEV_IF_XBAR_CNTL_TO 0x04c4
-
-/* Device Interrupt Registers */
-#define GT64260_DEV_INTR_CAUSE 0x04d0
-#define GT64260_DEV_INTR_MASK 0x04d4
-#define GT64260_DEV_INTR_ERR_ADDR 0x04d8
-
-
-/*
- *****************************************************************************
- *
- * PCI Bridge Interface Registers
- *
- *****************************************************************************
- */
-
-/* PCI Configuration Access Registers */
-#define GT64260_PCI_0_CONFIG_ADDR 0x0cf8
-#define GT64260_PCI_0_CONFIG_DATA 0x0cfc
-#define GT64260_PCI_0_IACK 0x0c34
-
-#define GT64260_PCI_1_CONFIG_ADDR 0x0c78
-#define GT64260_PCI_1_CONFIG_DATA 0x0c7c
-#define GT64260_PCI_1_IACK 0x0cb4
-
-/* PCI Control Registers */
-#define GT64260_PCI_0_CMD 0x0c00
-#define GT64260_PCI_0_MODE 0x0d00
-#define GT64260_PCI_0_TO_RETRY 0x0c04
-#define GT64260_PCI_0_RD_BUF_DISCARD_TIMER 0x0d04
-#define GT64260_PCI_0_MSI_TRIGGER_TIMER 0x0c38
-#define GT64260_PCI_0_ARBITER_CNTL 0x1d00
-#define GT64260_PCI_0_XBAR_CNTL_LO 0x1d08
-#define GT64260_PCI_0_XBAR_CNTL_HI 0x1d0c
-#define GT64260_PCI_0_XBAR_CNTL_TO 0x1d04
-#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_LO 0x1d18
-#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_HI 0x1d1c
-#define GT64260_PCI_0_SYNC_BARRIER 0x1d10
-#define GT64260_PCI_0_P2P_CONFIG 0x1d14
-#define GT64260_PCI_0_P2P_SWAP_CNTL 0x1d54
-
-#define GT64260_PCI_1_CMD 0x0c80
-#define GT64260_PCI_1_MODE 0x0d80
-#define GT64260_PCI_1_TO_RETRY 0x0c84
-#define GT64260_PCI_1_RD_BUF_DISCARD_TIMER 0x0d84
-#define GT64260_PCI_1_MSI_TRIGGER_TIMER 0x0cb8
-#define GT64260_PCI_1_ARBITER_CNTL 0x1d80
-#define GT64260_PCI_1_XBAR_CNTL_LO 0x1d88
-#define GT64260_PCI_1_XBAR_CNTL_HI 0x1d8c
-#define GT64260_PCI_1_XBAR_CNTL_TO 0x1d84
-#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_LO 0x1d98
-#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_HI 0x1d9c
-#define GT64260_PCI_1_SYNC_BARRIER 0x1d90
-#define GT64260_PCI_1_P2P_CONFIG 0x1d94
-#define GT64260_PCI_1_P2P_SWAP_CNTL 0x1dd4
-
-/* PCI Access Control Regions Registers */
-#define GT64260_PCI_ACC_CNTL_WINDOWS 8
-
-#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12)
-#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13)
-#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16)
-#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17)
-#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18)
-#define GT64260_PCI_ACC_CNTL_MBURST_4_WORDS 0x00000000
-#define GT64260_PCI_ACC_CNTL_MBURST_8_WORDS 0x00100000
-#define GT64260_PCI_ACC_CNTL_MBURST_16_WORDS 0x00200000
-#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
-#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000
-#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000
-#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000
-#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28)
-#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29)
-
-#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \
- GT64260_PCI_ACC_CNTL_DREADEN | \
- GT64260_PCI_ACC_CNTL_RDPREFETCH | \
- GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
- GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
- GT64260_PCI_ACC_CNTL_MBURST_MASK | \
- GT64260_PCI_ACC_CNTL_SWAP_MASK | \
- GT64260_PCI_ACC_CNTL_ACCPROT| \
- GT64260_PCI_ACC_CNTL_WRPROT)
-
-#define GT64260_PCI_0_ACC_CNTL_0_BASE_LO 0x1e00
-#define GT64260_PCI_0_ACC_CNTL_0_BASE_HI 0x1e04
-#define GT64260_PCI_0_ACC_CNTL_0_TOP 0x1e08
-#define GT64260_PCI_0_ACC_CNTL_1_BASE_LO 0x1e10
-#define GT64260_PCI_0_ACC_CNTL_1_BASE_HI 0x1e14
-#define GT64260_PCI_0_ACC_CNTL_1_TOP 0x1e18
-#define GT64260_PCI_0_ACC_CNTL_2_BASE_LO 0x1e20
-#define GT64260_PCI_0_ACC_CNTL_2_BASE_HI 0x1e24
-#define GT64260_PCI_0_ACC_CNTL_2_TOP 0x1e28
-#define GT64260_PCI_0_ACC_CNTL_3_BASE_LO 0x1e30
-#define GT64260_PCI_0_ACC_CNTL_3_BASE_HI 0x1e34
-#define GT64260_PCI_0_ACC_CNTL_3_TOP 0x1e38
-#define GT64260_PCI_0_ACC_CNTL_4_BASE_LO 0x1e40
-#define GT64260_PCI_0_ACC_CNTL_4_BASE_HI 0x1e44
-#define GT64260_PCI_0_ACC_CNTL_4_TOP 0x1e48
-#define GT64260_PCI_0_ACC_CNTL_5_BASE_LO 0x1e50
-#define GT64260_PCI_0_ACC_CNTL_5_BASE_HI 0x1e54
-#define GT64260_PCI_0_ACC_CNTL_5_TOP 0x1e58
-#define GT64260_PCI_0_ACC_CNTL_6_BASE_LO 0x1e60
-#define GT64260_PCI_0_ACC_CNTL_6_BASE_HI 0x1e64
-#define GT64260_PCI_0_ACC_CNTL_6_TOP 0x1e68
-#define GT64260_PCI_0_ACC_CNTL_7_BASE_LO 0x1e70
-#define GT64260_PCI_0_ACC_CNTL_7_BASE_HI 0x1e74
-#define GT64260_PCI_0_ACC_CNTL_7_TOP 0x1e78
-
-#define GT64260_PCI_1_ACC_CNTL_0_BASE_LO 0x1e80
-#define GT64260_PCI_1_ACC_CNTL_0_BASE_HI 0x1e84
-#define GT64260_PCI_1_ACC_CNTL_0_TOP 0x1e88
-#define GT64260_PCI_1_ACC_CNTL_1_BASE_LO 0x1e90
-#define GT64260_PCI_1_ACC_CNTL_1_BASE_HI 0x1e94
-#define GT64260_PCI_1_ACC_CNTL_1_TOP 0x1e98
-#define GT64260_PCI_1_ACC_CNTL_2_BASE_LO 0x1ea0
-#define GT64260_PCI_1_ACC_CNTL_2_BASE_HI 0x1ea4
-#define GT64260_PCI_1_ACC_CNTL_2_TOP 0x1ea8
-#define GT64260_PCI_1_ACC_CNTL_3_BASE_LO 0x1eb0
-#define GT64260_PCI_1_ACC_CNTL_3_BASE_HI 0x1eb4
-#define GT64260_PCI_1_ACC_CNTL_3_TOP 0x1eb8
-#define GT64260_PCI_1_ACC_CNTL_4_BASE_LO 0x1ec0
-#define GT64260_PCI_1_ACC_CNTL_4_BASE_HI 0x1ec4
-#define GT64260_PCI_1_ACC_CNTL_4_TOP 0x1ec8
-#define GT64260_PCI_1_ACC_CNTL_5_BASE_LO 0x1ed0
-#define GT64260_PCI_1_ACC_CNTL_5_BASE_HI 0x1ed4
-#define GT64260_PCI_1_ACC_CNTL_5_TOP 0x1ed8
-#define GT64260_PCI_1_ACC_CNTL_6_BASE_LO 0x1ee0
-#define GT64260_PCI_1_ACC_CNTL_6_BASE_HI 0x1ee4
-#define GT64260_PCI_1_ACC_CNTL_6_TOP 0x1ee8
-#define GT64260_PCI_1_ACC_CNTL_7_BASE_LO 0x1ef0
-#define GT64260_PCI_1_ACC_CNTL_7_BASE_HI 0x1ef4
-#define GT64260_PCI_1_ACC_CNTL_7_TOP 0x1ef8
-
-/* PCI Snoop Control Registers */
-#define GT64260_PCI_SNOOP_WINDOWS 4
-
-#define GT64260_PCI_SNOOP_NONE 0x00000000
-#define GT64260_PCI_SNOOP_WT 0x00001000
-#define GT64260_PCI_SNOOP_WB 0x00002000
-
-#define GT64260_PCI_0_SNOOP_0_BASE_LO 0x1f00
-#define GT64260_PCI_0_SNOOP_0_BASE_HI 0x1f04
-#define GT64260_PCI_0_SNOOP_0_TOP 0x1f08
-#define GT64260_PCI_0_SNOOP_1_BASE_LO 0x1f10
-#define GT64260_PCI_0_SNOOP_1_BASE_HI 0x1f14
-#define GT64260_PCI_0_SNOOP_1_TOP 0x1f18
-#define GT64260_PCI_0_SNOOP_2_BASE_LO 0x1f20
-#define GT64260_PCI_0_SNOOP_2_BASE_HI 0x1f24
-#define GT64260_PCI_0_SNOOP_2_TOP 0x1f28
-#define GT64260_PCI_0_SNOOP_3_BASE_LO 0x1f30
-#define GT64260_PCI_0_SNOOP_3_BASE_HI 0x1f34
-#define GT64260_PCI_0_SNOOP_3_TOP 0x1f38
-
-#define GT64260_PCI_1_SNOOP_0_BASE_LO 0x1f80
-#define GT64260_PCI_1_SNOOP_0_BASE_HI 0x1f84
-#define GT64260_PCI_1_SNOOP_0_TOP 0x1f88
-#define GT64260_PCI_1_SNOOP_1_BASE_LO 0x1f90
-#define GT64260_PCI_1_SNOOP_1_BASE_HI 0x1f94
-#define GT64260_PCI_1_SNOOP_1_TOP 0x1f98
-#define GT64260_PCI_1_SNOOP_2_BASE_LO 0x1fa0
-#define GT64260_PCI_1_SNOOP_2_BASE_HI 0x1fa4
-#define GT64260_PCI_1_SNOOP_2_TOP 0x1fa8
-#define GT64260_PCI_1_SNOOP_3_BASE_LO 0x1fb0
-#define GT64260_PCI_1_SNOOP_3_BASE_HI 0x1fb4
-#define GT64260_PCI_1_SNOOP_3_TOP 0x1fb8
-
-/* PCI Error Report Registers */
-#define GT64260_PCI_0_ERR_SERR_MASK 0x0c28
-#define GT64260_PCI_0_ERR_ADDR_LO 0x1d40
-#define GT64260_PCI_0_ERR_ADDR_HI 0x1d44
-#define GT64260_PCI_0_ERR_DATA_LO 0x1d48
-#define GT64260_PCI_0_ERR_DATA_HI 0x1d4c
-#define GT64260_PCI_0_ERR_CMD 0x1d50
-#define GT64260_PCI_0_ERR_CAUSE 0x1d58
-#define GT64260_PCI_0_ERR_MASK 0x1d5c
-
-#define GT64260_PCI_1_ERR_SERR_MASK 0x0ca8
-#define GT64260_PCI_1_ERR_ADDR_LO 0x1dc0
-#define GT64260_PCI_1_ERR_ADDR_HI 0x1dc4
-#define GT64260_PCI_1_ERR_DATA_LO 0x1dc8
-#define GT64260_PCI_1_ERR_DATA_HI 0x1dcc
-#define GT64260_PCI_1_ERR_CMD 0x1dd0
-#define GT64260_PCI_1_ERR_CAUSE 0x1dd8
-#define GT64260_PCI_1_ERR_MASK 0x1ddc
-
-/* PCI Slave Address Decoding Registers */
-#define GT64260_PCI_SCS_WINDOWS 4
-#define GT64260_PCI_CS_WINDOWS 4
-#define GT64260_PCI_BOOT_WINDOWS 1
-#define GT64260_PCI_P2P_MEM_WINDOWS 2
-#define GT64260_PCI_P2P_IO_WINDOWS 1
-#define GT64260_PCI_DAC_SCS_WINDOWS 4
-#define GT64260_PCI_DAC_CS_WINDOWS 4
-#define GT64260_PCI_DAC_BOOT_WINDOWS 1
-#define GT64260_PCI_DAC_P2P_MEM_WINDOWS 2
-
-#define GT64260_PCI_0_SLAVE_SCS_0_SIZE 0x0c08
-#define GT64260_PCI_0_SLAVE_SCS_1_SIZE 0x0d08
-#define GT64260_PCI_0_SLAVE_SCS_2_SIZE 0x0c0c
-#define GT64260_PCI_0_SLAVE_SCS_3_SIZE 0x0d0c
-#define GT64260_PCI_0_SLAVE_CS_0_SIZE 0x0c10
-#define GT64260_PCI_0_SLAVE_CS_1_SIZE 0x0d10
-#define GT64260_PCI_0_SLAVE_CS_2_SIZE 0x0d18
-#define GT64260_PCI_0_SLAVE_CS_3_SIZE 0x0c14
-#define GT64260_PCI_0_SLAVE_BOOT_SIZE 0x0d14
-#define GT64260_PCI_0_SLAVE_P2P_MEM_0_SIZE 0x0d1c
-#define GT64260_PCI_0_SLAVE_P2P_MEM_1_SIZE 0x0d20
-#define GT64260_PCI_0_SLAVE_P2P_IO_SIZE 0x0d24
-#define GT64260_PCI_0_SLAVE_CPU_SIZE 0x0d28
-
-#define GT64260_PCI_0_SLAVE_DAC_SCS_0_SIZE 0x0e00
-#define GT64260_PCI_0_SLAVE_DAC_SCS_1_SIZE 0x0e04
-#define GT64260_PCI_0_SLAVE_DAC_SCS_2_SIZE 0x0e08
-#define GT64260_PCI_0_SLAVE_DAC_SCS_3_SIZE 0x0e0c
-#define GT64260_PCI_0_SLAVE_DAC_CS_0_SIZE 0x0e10
-#define GT64260_PCI_0_SLAVE_DAC_CS_1_SIZE 0x0e14
-#define GT64260_PCI_0_SLAVE_DAC_CS_2_SIZE 0x0e18
-#define GT64260_PCI_0_SLAVE_DAC_CS_3_SIZE 0x0e1c
-#define GT64260_PCI_0_SLAVE_DAC_BOOT_SIZE 0x0e20
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_SIZE 0x0e24
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_SIZE 0x0e28
-#define GT64260_PCI_0_SLAVE_DAC_CPU_SIZE 0x0e2c
-
-#define GT64260_PCI_0_SLAVE_EXP_ROM_SIZE 0x0d2c
-
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_0 (1<<0)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_1 (1<<1)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_2 (1<<2)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_3 (1<<3)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_0 (1<<4)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_1 (1<<5)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_2 (1<<6)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_3 (1<<7)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_BOOT (1<<8)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_MEM (1<<9)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_IO (1<<10)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_0 (1<<11)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_1 (1<<12)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_IO (1<<13)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CPU (1<<14)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_0 (1<<15)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_1 (1<<16)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_2 (1<<17)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_3 (1<<18)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_0 (1<<19)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_1 (1<<20)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_2 (1<<21)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_3 (1<<22)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_BOOT (1<<23)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_0 (1<<24)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_1 (1<<25)
-#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CPU (1<<26)
-
-#define GT64260_PCI_0_SLAVE_BAR_REG_ENABLES 0x0c3c
-#define GT64260_PCI_0_SLAVE_SCS_0_REMAP 0x0c48
-#define GT64260_PCI_0_SLAVE_SCS_1_REMAP 0x0d48
-#define GT64260_PCI_0_SLAVE_SCS_2_REMAP 0x0c4c
-#define GT64260_PCI_0_SLAVE_SCS_3_REMAP 0x0d4c
-#define GT64260_PCI_0_SLAVE_CS_0_REMAP 0x0c50
-#define GT64260_PCI_0_SLAVE_CS_1_REMAP 0x0d50
-#define GT64260_PCI_0_SLAVE_CS_2_REMAP 0x0d58
-#define GT64260_PCI_0_SLAVE_CS_3_REMAP 0x0c54
-#define GT64260_PCI_0_SLAVE_BOOT_REMAP 0x0d54
-#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c
-#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60
-#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64
-#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68
-#define GT64260_PCI_0_SLAVE_P2P_IO_REMAP 0x0d6c
-#define GT64260_PCI_0_SLAVE_CPU_REMAP 0x0d70
-
-#define GT64260_PCI_0_SLAVE_DAC_SCS_0_REMAP 0x0f00
-#define GT64260_PCI_0_SLAVE_DAC_SCS_1_REMAP 0x0f04
-#define GT64260_PCI_0_SLAVE_DAC_SCS_2_REMAP 0x0f08
-#define GT64260_PCI_0_SLAVE_DAC_SCS_3_REMAP 0x0f0c
-#define GT64260_PCI_0_SLAVE_DAC_CS_0_REMAP 0x0f10
-#define GT64260_PCI_0_SLAVE_DAC_CS_1_REMAP 0x0f14
-#define GT64260_PCI_0_SLAVE_DAC_CS_2_REMAP 0x0f18
-#define GT64260_PCI_0_SLAVE_DAC_CS_3_REMAP 0x0f1c
-#define GT64260_PCI_0_SLAVE_DAC_BOOT_REMAP 0x0f20
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0f24
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0f28
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0f2c
-#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0f30
-#define GT64260_PCI_0_SLAVE_DAC_CPU_REMAP 0x0f34
-
-#define GT64260_PCI_0_SLAVE_EXP_ROM_REMAP 0x0f38
-#define GT64260_PCI_0_SLAVE_PCI_DECODE_CNTL 0x0d3c
-
-#define GT64260_PCI_1_SLAVE_SCS_0_SIZE 0x0c88
-#define GT64260_PCI_1_SLAVE_SCS_1_SIZE 0x0d88
-#define GT64260_PCI_1_SLAVE_SCS_2_SIZE 0x0c8c
-#define GT64260_PCI_1_SLAVE_SCS_3_SIZE 0x0d8c
-#define GT64260_PCI_1_SLAVE_CS_0_SIZE 0x0c90
-#define GT64260_PCI_1_SLAVE_CS_1_SIZE 0x0d90
-#define GT64260_PCI_1_SLAVE_CS_2_SIZE 0x0d98
-#define GT64260_PCI_1_SLAVE_CS_3_SIZE 0x0c94
-#define GT64260_PCI_1_SLAVE_BOOT_SIZE 0x0d94
-#define GT64260_PCI_1_SLAVE_P2P_MEM_0_SIZE 0x0d9c
-#define GT64260_PCI_1_SLAVE_P2P_MEM_1_SIZE 0x0da0
-#define GT64260_PCI_1_SLAVE_P2P_IO_SIZE 0x0da4
-#define GT64260_PCI_1_SLAVE_CPU_SIZE 0x0da8
-
-#define GT64260_PCI_1_SLAVE_DAC_SCS_0_SIZE 0x0e80
-#define GT64260_PCI_1_SLAVE_DAC_SCS_1_SIZE 0x0e84
-#define GT64260_PCI_1_SLAVE_DAC_SCS_2_SIZE 0x0e88
-#define GT64260_PCI_1_SLAVE_DAC_SCS_3_SIZE 0x0e8c
-#define GT64260_PCI_1_SLAVE_DAC_CS_0_SIZE 0x0e90
-#define GT64260_PCI_1_SLAVE_DAC_CS_1_SIZE 0x0e94
-#define GT64260_PCI_1_SLAVE_DAC_CS_2_SIZE 0x0e98
-#define GT64260_PCI_1_SLAVE_DAC_CS_3_SIZE 0x0e9c
-#define GT64260_PCI_1_SLAVE_DAC_BOOT_SIZE 0x0ea0
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_SIZE 0x0ea4
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_SIZE 0x0ea8
-#define GT64260_PCI_1_SLAVE_DAC_CPU_SIZE 0x0eac
-
-#define GT64260_PCI_1_SLAVE_EXP_ROM_SIZE 0x0dac
-
-#define GT64260_PCI_1_SLAVE_BAR_REG_ENABLES 0x0cbc
-#define GT64260_PCI_1_SLAVE_SCS_0_REMAP 0x0cc8
-#define GT64260_PCI_1_SLAVE_SCS_1_REMAP 0x0dc8
-#define GT64260_PCI_1_SLAVE_SCS_2_REMAP 0x0ccc
-#define GT64260_PCI_1_SLAVE_SCS_3_REMAP 0x0dcc
-#define GT64260_PCI_1_SLAVE_CS_0_REMAP 0x0cd0
-#define GT64260_PCI_1_SLAVE_CS_1_REMAP 0x0dd0
-#define GT64260_PCI_1_SLAVE_CS_2_REMAP 0x0dd8
-#define GT64260_PCI_1_SLAVE_CS_3_REMAP 0x0cd4
-#define GT64260_PCI_1_SLAVE_BOOT_REMAP 0x0dd4
-#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc
-#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0
-#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4
-#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8
-#define GT64260_PCI_1_SLAVE_P2P_IO_REMAP 0x0dec
-#define GT64260_PCI_1_SLAVE_CPU_REMAP 0x0df0
-
-#define GT64260_PCI_1_SLAVE_DAC_SCS_0_REMAP 0x0f80
-#define GT64260_PCI_1_SLAVE_DAC_SCS_1_REMAP 0x0f84
-#define GT64260_PCI_1_SLAVE_DAC_SCS_2_REMAP 0x0f88
-#define GT64260_PCI_1_SLAVE_DAC_SCS_3_REMAP 0x0f8c
-#define GT64260_PCI_1_SLAVE_DAC_CS_0_REMAP 0x0f90
-#define GT64260_PCI_1_SLAVE_DAC_CS_1_REMAP 0x0f94
-#define GT64260_PCI_1_SLAVE_DAC_CS_2_REMAP 0x0f98
-#define GT64260_PCI_1_SLAVE_DAC_CS_3_REMAP 0x0f9c
-#define GT64260_PCI_1_SLAVE_DAC_BOOT_REMAP 0x0fa0
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0fa4
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0fa8
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0fac
-#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0fb0
-#define GT64260_PCI_1_SLAVE_DAC_CPU_REMAP 0x0fb4
-
-#define GT64260_PCI_1_SLAVE_EXP_ROM_REMAP 0x0fb8
-#define GT64260_PCI_1_SLAVE_PCI_DECODE_CNTL 0x0dbc
-
-
-/*
- *****************************************************************************
- *
- * I2O Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-
-/*
- *****************************************************************************
- *
- * DMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-/*
- *****************************************************************************
- *
- * Timer/Counter Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-/*
- *****************************************************************************
- *
- * Communications Controller (Enet, Serial, etc.) Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_ENET_0_CNTL_LO 0xf200
-#define GT64260_ENET_0_CNTL_HI 0xf204
-#define GT64260_ENET_0_RX_BUF_PCI_ADDR_HI 0xf208
-#define GT64260_ENET_0_TX_BUF_PCI_ADDR_HI 0xf20c
-#define GT64260_ENET_0_RX_DESC_ADDR_HI 0xf210
-#define GT64260_ENET_0_TX_DESC_ADDR_HI 0xf214
-#define GT64260_ENET_0_HASH_TAB_PCI_ADDR_HI 0xf218
-#define GT64260_ENET_1_CNTL_LO 0xf220
-#define GT64260_ENET_1_CNTL_HI 0xf224
-#define GT64260_ENET_1_RX_BUF_PCI_ADDR_HI 0xf228
-#define GT64260_ENET_1_TX_BUF_PCI_ADDR_HI 0xf22c
-#define GT64260_ENET_1_RX_DESC_ADDR_HI 0xf230
-#define GT64260_ENET_1_TX_DESC_ADDR_HI 0xf234
-#define GT64260_ENET_1_HASH_TAB_PCI_ADDR_HI 0xf238
-#define GT64260_ENET_2_CNTL_LO 0xf240
-#define GT64260_ENET_2_CNTL_HI 0xf244
-#define GT64260_ENET_2_RX_BUF_PCI_ADDR_HI 0xf248
-#define GT64260_ENET_2_TX_BUF_PCI_ADDR_HI 0xf24c
-#define GT64260_ENET_2_RX_DESC_ADDR_HI 0xf250
-#define GT64260_ENET_2_TX_DESC_ADDR_HI 0xf254
-#define GT64260_ENET_2_HASH_TAB_PCI_ADDR_HI 0xf258
-
-#define GT64260_MPSC_0_CNTL_LO 0xf280
-#define GT64260_MPSC_0_CNTL_HI 0xf284
-#define GT64260_MPSC_0_RX_BUF_PCI_ADDR_HI 0xf288
-#define GT64260_MPSC_0_TX_BUF_PCI_ADDR_HI 0xf28c
-#define GT64260_MPSC_0_RX_DESC_ADDR_HI 0xf290
-#define GT64260_MPSC_0_TX_DESC_ADDR_HI 0xf294
-#define GT64260_MPSC_1_CNTL_LO 0xf2c0
-#define GT64260_MPSC_1_CNTL_HI 0xf2c4
-#define GT64260_MPSC_1_RX_BUF_PCI_ADDR_HI 0xf2c8
-#define GT64260_MPSC_1_TX_BUF_PCI_ADDR_HI 0xf2cc
-#define GT64260_MPSC_1_RX_DESC_ADDR_HI 0xf2d0
-#define GT64260_MPSC_1_TX_DESC_ADDR_HI 0xf2d4
-
-#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320
-#define GT64260_SER_INIT_LAST_DATA 0xf324
-#define GT64260_SER_INIT_CONTROL 0xf328
-#define GT64260_SER_INIT_STATUS 0xf32c
-
-#define GT64260_COMM_ARBITER_CNTL 0xf300
-#define GT64260_COMM_CONFIG 0xb40c
-#define GT64260_COMM_XBAR_TO 0xf304
-#define GT64260_COMM_INTR_CAUSE 0xf310
-#define GT64260_COMM_INTR_MASK 0xf314
-#define GT64260_COMM_ERR_ADDR 0xf318
-
-
-/*
- *****************************************************************************
- *
- * Fast Ethernet Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_ENET_PHY_ADDR 0x2000
-#define GT64260_ENET_ESMIR 0x2010
-
-#define GT64260_ENET_E0PCR 0x2400
-#define GT64260_ENET_E0PCXR 0x2408
-#define GT64260_ENET_E0PCMR 0x2410
-#define GT64260_ENET_E0PSR 0x2418
-#define GT64260_ENET_E0SPR 0x2420
-#define GT64260_ENET_E0HTPR 0x2428
-#define GT64260_ENET_E0FCSAL 0x2430
-#define GT64260_ENET_E0FCSAH 0x2438
-#define GT64260_ENET_E0SDCR 0x2440
-#define GT64260_ENET_E0SDCMR 0x2448
-#define GT64260_ENET_E0ICR 0x2450
-#define GT64260_ENET_E0IMR 0x2458
-#define GT64260_ENET_E0FRDP0 0x2480
-#define GT64260_ENET_E0FRDP1 0x2484
-#define GT64260_ENET_E0FRDP2 0x2488
-#define GT64260_ENET_E0FRDP3 0x248c
-#define GT64260_ENET_E0CRDP0 0x24a0
-#define GT64260_ENET_E0CRDP1 0x24a4
-#define GT64260_ENET_E0CRDP2 0x24a8
-#define GT64260_ENET_E0CRDP3 0x24ac
-#define GT64260_ENET_E0CTDP0 0x24e0
-#define GT64260_ENET_E0CTDP1 0x24e4
-#define GT64260_ENET_0_DSCP2P0L 0x2460
-#define GT64260_ENET_0_DSCP2P0H 0x2464
-#define GT64260_ENET_0_DSCP2P1L 0x2468
-#define GT64260_ENET_0_DSCP2P1H 0x246c
-#define GT64260_ENET_0_VPT2P 0x2470
-#define GT64260_ENET_0_MIB_CTRS 0x2500
-
-#define GT64260_ENET_E1PCR 0x2800
-#define GT64260_ENET_E1PCXR 0x2808
-#define GT64260_ENET_E1PCMR 0x2810
-#define GT64260_ENET_E1PSR 0x2818
-#define GT64260_ENET_E1SPR 0x2820
-#define GT64260_ENET_E1HTPR 0x2828
-#define GT64260_ENET_E1FCSAL 0x2830
-#define GT64260_ENET_E1FCSAH 0x2838
-#define GT64260_ENET_E1SDCR 0x2840
-#define GT64260_ENET_E1SDCMR 0x2848
-#define GT64260_ENET_E1ICR 0x2850
-#define GT64260_ENET_E1IMR 0x2858
-#define GT64260_ENET_E1FRDP0 0x2880
-#define GT64260_ENET_E1FRDP1 0x2884
-#define GT64260_ENET_E1FRDP2 0x2888
-#define GT64260_ENET_E1FRDP3 0x288c
-#define GT64260_ENET_E1CRDP0 0x28a0
-#define GT64260_ENET_E1CRDP1 0x28a4
-#define GT64260_ENET_E1CRDP2 0x28a8
-#define GT64260_ENET_E1CRDP3 0x28ac
-#define GT64260_ENET_E1CTDP0 0x28e0
-#define GT64260_ENET_E1CTDP1 0x28e4
-#define GT64260_ENET_1_DSCP2P0L 0x2860
-#define GT64260_ENET_1_DSCP2P0H 0x2864
-#define GT64260_ENET_1_DSCP2P1L 0x2868
-#define GT64260_ENET_1_DSCP2P1H 0x286c
-#define GT64260_ENET_1_VPT2P 0x2870
-#define GT64260_ENET_1_MIB_CTRS 0x2900
-
-#define GT64260_ENET_E2PCR 0x2c00
-#define GT64260_ENET_E2PCXR 0x2c08
-#define GT64260_ENET_E2PCMR 0x2c10
-#define GT64260_ENET_E2PSR 0x2c18
-#define GT64260_ENET_E2SPR 0x2c20
-#define GT64260_ENET_E2HTPR 0x2c28
-#define GT64260_ENET_E2FCSAL 0x2c30
-#define GT64260_ENET_E2FCSAH 0x2c38
-#define GT64260_ENET_E2SDCR 0x2c40
-#define GT64260_ENET_E2SDCMR 0x2c48
-#define GT64260_ENET_E2ICR 0x2c50
-#define GT64260_ENET_E2IMR 0x2c58
-#define GT64260_ENET_E2FRDP0 0x2c80
-#define GT64260_ENET_E2FRDP1 0x2c84
-#define GT64260_ENET_E2FRDP2 0x2c88
-#define GT64260_ENET_E2FRDP3 0x2c8c
-#define GT64260_ENET_E2CRDP0 0x2ca0
-#define GT64260_ENET_E2CRDP1 0x2ca4
-#define GT64260_ENET_E2CRDP2 0x2ca8
-#define GT64260_ENET_E2CRDP3 0x2cac
-#define GT64260_ENET_E2CTDP0 0x2ce0
-#define GT64260_ENET_E2CTDP1 0x2ce4
-#define GT64260_ENET_2_DSCP2P0L 0x2c60
-#define GT64260_ENET_2_DSCP2P0H 0x2c64
-#define GT64260_ENET_2_DSCP2P1L 0x2c68
-#define GT64260_ENET_2_DSCP2P1H 0x2c6c
-#define GT64260_ENET_2_VPT2P 0x2c70
-#define GT64260_ENET_2_MIB_CTRS 0x2d00
-
-
-/*
- *****************************************************************************
- *
- * Multi-Protocol Serial Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* Signal Routing */
-#define GT64260_MPSC_MRR 0xb400
-#define GT64260_MPSC_RCRR 0xb404
-#define GT64260_MPSC_TCRR 0xb408
-
-/* Main Configuratino Registers */
-#define GT64260_MPSC_0_MMCRL 0x8000
-#define GT64260_MPSC_0_MMCRH 0x8004
-#define GT64260_MPSC_0_MPCR 0x8008
-#define GT64260_MPSC_0_CHR_1 0x800c
-#define GT64260_MPSC_0_CHR_2 0x8010
-#define GT64260_MPSC_0_CHR_3 0x8014
-#define GT64260_MPSC_0_CHR_4 0x8018
-#define GT64260_MPSC_0_CHR_5 0x801c
-#define GT64260_MPSC_0_CHR_6 0x8020
-#define GT64260_MPSC_0_CHR_7 0x8024
-#define GT64260_MPSC_0_CHR_8 0x8028
-#define GT64260_MPSC_0_CHR_9 0x802c
-#define GT64260_MPSC_0_CHR_10 0x8030
-#define GT64260_MPSC_0_CHR_11 0x8034
-
-#define GT64260_MPSC_1_MMCRL 0x9000
-#define GT64260_MPSC_1_MMCRH 0x9004
-#define GT64260_MPSC_1_MPCR 0x9008
-#define GT64260_MPSC_1_CHR_1 0x900c
-#define GT64260_MPSC_1_CHR_2 0x9010
-#define GT64260_MPSC_1_CHR_3 0x9014
-#define GT64260_MPSC_1_CHR_4 0x9018
-#define GT64260_MPSC_1_CHR_5 0x901c
-#define GT64260_MPSC_1_CHR_6 0x9020
-#define GT64260_MPSC_1_CHR_7 0x9024
-#define GT64260_MPSC_1_CHR_8 0x9028
-#define GT64260_MPSC_1_CHR_9 0x902c
-#define GT64260_MPSC_1_CHR_10 0x9030
-#define GT64260_MPSC_1_CHR_11 0x9034
-
-#define GT64260_MPSC_0_INTR_CAUSE 0xb804
-#define GT64260_MPSC_0_INTR_MASK 0xb884
-#define GT64260_MPSC_1_INTR_CAUSE 0xb80c
-#define GT64260_MPSC_1_INTR_MASK 0xb88c
-
-#define GT64260_MPSC_UART_CR_TEV (1<<1)
-#define GT64260_MPSC_UART_CR_TA (1<<7)
-#define GT64260_MPSC_UART_CR_TTCS (1<<9)
-#define GT64260_MPSC_UART_CR_REV (1<<17)
-#define GT64260_MPSC_UART_CR_RA (1<<23)
-#define GT64260_MPSC_UART_CR_CRD (1<<25)
-#define GT64260_MPSC_UART_CR_EH (1<<31)
-
-#define GT64260_MPSC_UART_ESR_CTS (1<<0)
-#define GT64260_MPSC_UART_ESR_CD (1<<1)
-#define GT64260_MPSC_UART_ESR_TIDLE (1<<3)
-#define GT64260_MPSC_UART_ESR_RHS (1<<5)
-#define GT64260_MPSC_UART_ESR_RLS (1<<7)
-#define GT64260_MPSC_UART_ESR_RLIDL (1<<11)
-
-
-/*
- *****************************************************************************
- *
- * Serial DMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_SDMA_0_SDC 0x4000
-#define GT64260_SDMA_0_SDCM 0x4008
-#define GT64260_SDMA_0_RX_DESC 0x4800
-#define GT64260_SDMA_0_RX_BUF_PTR 0x4808
-#define GT64260_SDMA_0_SCRDP 0x4810
-#define GT64260_SDMA_0_TX_DESC 0x4c00
-#define GT64260_SDMA_0_SCTDP 0x4c10
-#define GT64260_SDMA_0_SFTDP 0x4c14
-
-#define GT64260_SDMA_1_SDC 0x6000
-#define GT64260_SDMA_1_SDCM 0x6008
-#define GT64260_SDMA_1_RX_DESC 0x6800
-#define GT64260_SDMA_1_RX_BUF_PTR 0x6808
-#define GT64260_SDMA_1_SCRDP 0x6810
-#define GT64260_SDMA_1_TX_DESC 0x6c00
-#define GT64260_SDMA_1_SCTDP 0x6c10
-#define GT64260_SDMA_1_SFTDP 0x6c14
-
-#define GT64260_SDMA_INTR_CAUSE 0xb800
-#define GT64260_SDMA_INTR_MASK 0xb880
-
-#define GT64260_SDMA_DESC_CMDSTAT_PE (1<<0)
-#define GT64260_SDMA_DESC_CMDSTAT_CDL (1<<1)
-#define GT64260_SDMA_DESC_CMDSTAT_FR (1<<3)
-#define GT64260_SDMA_DESC_CMDSTAT_OR (1<<6)
-#define GT64260_SDMA_DESC_CMDSTAT_BR (1<<9)
-#define GT64260_SDMA_DESC_CMDSTAT_MI (1<<10)
-#define GT64260_SDMA_DESC_CMDSTAT_A (1<<11)
-#define GT64260_SDMA_DESC_CMDSTAT_AM (1<<12)
-#define GT64260_SDMA_DESC_CMDSTAT_CT (1<<13)
-#define GT64260_SDMA_DESC_CMDSTAT_C (1<<14)
-#define GT64260_SDMA_DESC_CMDSTAT_ES (1<<15)
-#define GT64260_SDMA_DESC_CMDSTAT_L (1<<16)
-#define GT64260_SDMA_DESC_CMDSTAT_F (1<<17)
-#define GT64260_SDMA_DESC_CMDSTAT_P (1<<18)
-#define GT64260_SDMA_DESC_CMDSTAT_EI (1<<23)
-#define GT64260_SDMA_DESC_CMDSTAT_O (1<<31)
-
-#define GT64260_SDMA_SDC_RFT (1<<0)
-#define GT64260_SDMA_SDC_SFM (1<<1)
-#define GT64260_SDMA_SDC_BLMR (1<<6)
-#define GT64260_SDMA_SDC_BLMT (1<<7)
-#define GT64260_SDMA_SDC_POVR (1<<8)
-#define GT64260_SDMA_SDC_RIFB (1<<9)
-
-#define GT64260_SDMA_SDCM_ERD (1<<7)
-#define GT64260_SDMA_SDCM_AR (1<<15)
-#define GT64260_SDMA_SDCM_STD (1<<16)
-#define GT64260_SDMA_SDCM_TXD (1<<23)
-#define GT64260_SDMA_SDCM_AT (1<<31)
-
-#define GT64260_SDMA_0_CAUSE_RXBUF (1<<0)
-#define GT64260_SDMA_0_CAUSE_RXERR (1<<1)
-#define GT64260_SDMA_0_CAUSE_TXBUF (1<<2)
-#define GT64260_SDMA_0_CAUSE_TXEND (1<<3)
-#define GT64260_SDMA_1_CAUSE_RXBUF (1<<8)
-#define GT64260_SDMA_1_CAUSE_RXERR (1<<9)
-#define GT64260_SDMA_1_CAUSE_TXBUF (1<<10)
-#define GT64260_SDMA_1_CAUSE_TXEND (1<<11)
-
-
-/*
- *****************************************************************************
- *
- * Baud Rate Generator Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_BRG_0_BCR 0xb200
-#define GT64260_BRG_0_BTR 0xb204
-#define GT64260_BRG_1_BCR 0xb208
-#define GT64260_BRG_1_BTR 0xb20c
-#define GT64260_BRG_2_BCR 0xb210
-#define GT64260_BRG_2_BTR 0xb214
-
-#define GT64260_BRG_INTR_CAUSE 0xb834
-#define GT64260_BRG_INTR_MASK 0xb8b4
-
-
-/*
- *****************************************************************************
- *
- * Watchdog Timer Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_WDT_WDC 0xb410
-#define GT64260_WDT_WDV 0xb414
-
-
-/*
- *****************************************************************************
- *
- * General Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_GPP_IO_CNTL 0xf100
-#define GT64260_GPP_LEVEL_CNTL 0xf110
-#define GT64260_GPP_VALUE 0xf104
-#define GT64260_GPP_INTR_CAUSE 0xf108
-#define GT64260_GPP_INTR_MASK 0xf10c
-
-
-/*
- *****************************************************************************
- *
- * Multi-Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_MPP_CNTL_0 0xf000
-#define GT64260_MPP_CNTL_1 0xf004
-#define GT64260_MPP_CNTL_2 0xf008
-#define GT64260_MPP_CNTL_3 0xf00c
-#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010
-
-
-/*
- *****************************************************************************
- *
- * I2C Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* FIXME: fill in */
-
-
-/*
- *****************************************************************************
- *
- * Interrupt Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_IC_MAIN_CAUSE_LO 0x0c18
-#define GT64260_IC_MAIN_CAUSE_HI 0x0c68
-#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c
-#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c
-#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70
-#define GT64260_IC_PCI_0_INTR_MASK_LO 0x0c24
-#define GT64260_IC_PCI_0_INTR_MASK_HI 0x0c64
-#define GT64260_IC_PCI_0_SELECT_CAUSE 0x0c74
-#define GT64260_IC_PCI_1_INTR_MASK_LO 0x0ca4
-#define GT64260_IC_PCI_1_INTR_MASK_HI 0x0ce4
-#define GT64260_IC_PCI_1_SELECT_CAUSE 0x0cf4
-#define GT64260_IC_CPU_INT_0_MASK 0x0e60
-#define GT64260_IC_CPU_INT_1_MASK 0x0e64
-#define GT64260_IC_CPU_INT_2_MASK 0x0e68
-#define GT64260_IC_CPU_INT_3_MASK 0x0e6c
-
-
-#endif /* __ASMPPC_GT64260_DEFS_H */
diff --git a/include/asm-ppc/harrier.h b/include/asm-ppc/harrier.h
deleted file mode 100644
index 7acd7fc126ec..000000000000
--- a/include/asm-ppc/harrier.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Definitions for Motorola MCG Harrier North Bridge & Memory controller
- *
- * Author: Dale Farnsworth
- * dale.farnsworth@mvista.com
- *
- * Modified by: Randy Vinson
- * rvinson@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASMPPC_HARRIER_H
-#define __ASMPPC_HARRIER_H
-
-#include <linux/types.h>
-#include <asm/pci-bridge.h>
-
-struct pci_controller;
-int harrier_init(struct pci_controller *hose,
- uint ppc_reg_base,
- ulong processor_pci_mem_start,
- ulong processor_pci_mem_end,
- ulong processor_pci_io_start,
- ulong processor_pci_io_end,
- ulong processor_mpic_base);
-
-unsigned long harrier_get_mem_size(uint smc_base);
-
-int harrier_mpic_init(unsigned int pci_mem_offset);
-
-void harrier_setup_nonmonarch(uint ppc_reg_base,
- uint in0_size);
-void harrier_release_eready(uint ppc_reg_base);
-
-void harrier_wait_eready(uint ppc_reg_base);
-
-#endif /* __ASMPPC_HARRIER_H */
diff --git a/include/asm-ppc/hawk.h b/include/asm-ppc/hawk.h
deleted file mode 100644
index f347007d22af..000000000000
--- a/include/asm-ppc/hawk.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-ppc/hawk.h
- *
- * Support functions for MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001,2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_HAWK_H
-#define __ASMPPC_HAWK_H
-
-#include <asm/pci-bridge.h>
-#include <asm/hawk_defs.h>
-
-extern int hawk_init(struct pci_controller *hose,
- unsigned int ppc_reg_base, unsigned long processor_pci_mem_start,
- unsigned long processor_pci_mem_end,
- unsigned long processor_pci_io_start,
- unsigned long processor_pci_io_end,
- unsigned long processor_mpic_base);
-extern unsigned long hawk_get_mem_size(unsigned int smc_base);
-extern int hawk_mpic_init(unsigned int pci_mem_offset);
-
-#endif /* __ASMPPC_HAWK_H */
diff --git a/include/asm-ppc/hawk_defs.h b/include/asm-ppc/hawk_defs.h
deleted file mode 100644
index 6d1d2baf648c..000000000000
--- a/include/asm-ppc/hawk_defs.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-ppc/hawk_defs.h
- *
- * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_HAWK_DEFS_H
-#define __ASMPPC_HAWK_DEFS_H
-
-#include <asm/pci-bridge.h>
-
-/*
- * The Falcon/Raven and HAWK have 4 sets of registers:
- * 1) PPC Registers which define the mappings from PPC bus to PCI bus,
- * etc.
- * 2) PCI Registers which define the mappings from PCI bus to PPC bus and the
- * MPIC base address.
- * 3) MPIC registers
- * 4) System Memory Controller (SMC) registers.
- */
-
-#define HAWK_PCI_CONFIG_ADDR_OFF 0x00000cf8
-#define HAWK_PCI_CONFIG_DATA_OFF 0x00000cfc
-
-#define HAWK_MPIC_SIZE 0x00040000U
-#define HAWK_SMC_SIZE 0x00001000U
-
-/*
- * Define PPC register offsets.
- */
-#define HAWK_PPC_XSADD0_OFF 0x40
-#define HAWK_PPC_XSOFF0_OFF 0x44
-#define HAWK_PPC_XSADD1_OFF 0x48
-#define HAWK_PPC_XSOFF1_OFF 0x4c
-#define HAWK_PPC_XSADD2_OFF 0x50
-#define HAWK_PPC_XSOFF2_OFF 0x54
-#define HAWK_PPC_XSADD3_OFF 0x58
-#define HAWK_PPC_XSOFF3_OFF 0x5c
-
-/*
- * Define PCI register offsets.
- */
-#define HAWK_PCI_PSADD0_OFF 0x80
-#define HAWK_PCI_PSOFF0_OFF 0x84
-#define HAWK_PCI_PSADD1_OFF 0x88
-#define HAWK_PCI_PSOFF1_OFF 0x8c
-#define HAWK_PCI_PSADD2_OFF 0x90
-#define HAWK_PCI_PSOFF2_OFF 0x94
-#define HAWK_PCI_PSADD3_OFF 0x98
-#define HAWK_PCI_PSOFF3_OFF 0x9c
-
-/*
- * Define the System Memory Controller (SMC) register offsets.
- */
-#define HAWK_SMC_RAM_A_SIZE_REG_OFF 0x10
-#define HAWK_SMC_RAM_B_SIZE_REG_OFF 0x11
-#define HAWK_SMC_RAM_C_SIZE_REG_OFF 0x12
-#define HAWK_SMC_RAM_D_SIZE_REG_OFF 0x13
-#define HAWK_SMC_RAM_E_SIZE_REG_OFF 0xc0 /* HAWK Only */
-#define HAWK_SMC_RAM_F_SIZE_REG_OFF 0xc1 /* HAWK Only */
-#define HAWK_SMC_RAM_G_SIZE_REG_OFF 0xc2 /* HAWK Only */
-#define HAWK_SMC_RAM_H_SIZE_REG_OFF 0xc3 /* HAWK Only */
-
-#define FALCON_SMC_REG_COUNT 4
-#define HAWK_SMC_REG_COUNT 8
-#endif /* __ASMPPC_HAWK_DEFS_H */
diff --git a/include/asm-ppc/highmem.h b/include/asm-ppc/highmem.h
deleted file mode 100644
index f7b21ee302b4..000000000000
--- a/include/asm-ppc/highmem.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * highmem.h: virtual kernel memory mappings for high memory
- *
- * PowerPC version, stolen from the i386 version.
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- * Gerhard.Wichert@pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- */
-
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/kmap_types.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-
-/* undef for production */
-#define HIGHMEM_DEBUG 1
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-#define PKMAP_BASE CONFIG_HIGHMEM_START
-#define LAST_PKMAP (1 << PTE_SHIFT)
-#define LAST_PKMAP_MASK (LAST_PKMAP-1)
-#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-#define KMAP_FIX_BEGIN (PKMAP_BASE + 0x00400000UL)
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-static inline void *kmap(struct page *page)
-{
- might_sleep();
- if (!PageHighMem(page))
- return page_address(page);
- return kmap_high(page);
-}
-
-static inline void kunmap(struct page *page)
-{
- BUG_ON(in_interrupt());
- if (!PageHighMem(page))
- return;
- kunmap_high(page);
-}
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic(struct page *page, enum km_type type)
-{
- unsigned int idx;
- unsigned long vaddr;
-
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
- pagefault_disable();
- if (!PageHighMem(page))
- return page_address(page);
-
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE;
-#ifdef HIGHMEM_DEBUG
- BUG_ON(!pte_none(*(kmap_pte+idx)));
-#endif
- set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot));
- flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef HIGHMEM_DEBUG
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- unsigned int idx = type + KM_TYPE_NR*smp_processor_id();
-
- if (vaddr < KMAP_FIX_BEGIN) { // FIXME
- pagefault_enable();
- return;
- }
-
- BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE);
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte+idx);
- flush_tlb_page(NULL, vaddr);
-#endif
- pagefault_enable();
-}
-
-static inline struct page *kmap_atomic_to_page(void *ptr)
-{
- unsigned long idx, vaddr = (unsigned long) ptr;
-
- if (vaddr < KMAP_FIX_BEGIN)
- return virt_to_page(ptr);
-
- idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT;
- return pte_page(kmap_pte[idx]);
-}
-
-#define flush_cache_kmaps() flush_cache_all()
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */
diff --git a/include/asm-ppc/hydra.h b/include/asm-ppc/hydra.h
deleted file mode 100644
index 1ad4eed07fbe..000000000000
--- a/include/asm-ppc/hydra.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
- *
- * Copyright (C) 1997 Geert Uytterhoeven
- *
- * This file is based on the following documentation:
- *
- * Macintosh Technology in the Common Hardware Reference Platform
- * Apple Computer, Inc.
- *
- * © Copyright 1995 Apple Computer, Inc. All rights reserved.
- *
- * It's available online from http://chrp.apple.com/MacTech.pdf.
- * You can obtain paper copies of this book from computer bookstores or by
- * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
- * Francisco, CA 94104. Reference ISBN 1-55860-393-X.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASMPPC_HYDRA_H
-#define _ASMPPC_HYDRA_H
-
-#ifdef __KERNEL__
-
-struct Hydra {
- /* DBDMA Controller Register Space */
- char Pad1[0x30];
- u_int CachePD;
- u_int IDs;
- u_int Feature_Control;
- char Pad2[0x7fc4];
- /* DBDMA Channel Register Space */
- char SCSI_DMA[0x100];
- char Pad3[0x300];
- char SCCA_Tx_DMA[0x100];
- char SCCA_Rx_DMA[0x100];
- char SCCB_Tx_DMA[0x100];
- char SCCB_Rx_DMA[0x100];
- char Pad4[0x7800];
- /* Device Register Space */
- char SCSI[0x1000];
- char ADB[0x1000];
- char SCC_Legacy[0x1000];
- char SCC[0x1000];
- char Pad9[0x2000];
- char VIA[0x2000];
- char Pad10[0x28000];
- char OpenPIC[0x40000];
-};
-
-extern volatile struct Hydra __iomem *Hydra;
-
-
- /*
- * Feature Control Register
- */
-
-#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */
-#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */
-#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */
-#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */
-#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */
-#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */
-#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */
-#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */
-#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */
-
-
- /*
- * OpenPIC Interrupt Sources
- */
-
-#define HYDRA_INT_SIO 0
-#define HYDRA_INT_SCSI_DMA 1
-#define HYDRA_INT_SCCA_TX_DMA 2
-#define HYDRA_INT_SCCA_RX_DMA 3
-#define HYDRA_INT_SCCB_TX_DMA 4
-#define HYDRA_INT_SCCB_RX_DMA 5
-#define HYDRA_INT_SCSI 6
-#define HYDRA_INT_SCCA 7
-#define HYDRA_INT_SCCB 8
-#define HYDRA_INT_VIA 9
-#define HYDRA_INT_ADB 10
-#define HYDRA_INT_ADB_NMI 11
-#define HYDRA_INT_EXT1 12 /* PCI IRQW */
-#define HYDRA_INT_EXT2 13 /* PCI IRQX */
-#define HYDRA_INT_EXT3 14 /* PCI IRQY */
-#define HYDRA_INT_EXT4 15 /* PCI IRQZ */
-#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */
-#define HYDRA_INT_EXT6 17 /* IDE Secondary */
-#define HYDRA_INT_EXT7 18 /* Power Off Request */
-#define HYDRA_INT_SPARE 19
-
-extern int hydra_init(void);
-extern void macio_adb_init(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASMPPC_HYDRA_H */
diff --git a/include/asm-ppc/ibm403.h b/include/asm-ppc/ibm403.h
deleted file mode 100644
index c9c5d539cfdb..000000000000
--- a/include/asm-ppc/ibm403.h
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * Authors: Armin Kuster <akuster@mvista.com> and Tom Rini <trini@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM403_H__
-#define __ASM_IBM403_H__
-
-
-#if defined(CONFIG_403GCX)
-
-#define DCRN_BE_BASE 0x090
-#define DCRN_DMA0_BASE 0x0C0
-#define DCRN_DMA1_BASE 0x0C8
-#define DCRN_DMA2_BASE 0x0D0
-#define DCRN_DMA3_BASE 0x0D8
-#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */
-#define DCRN_DMASR_BASE 0x0E0
-
-#define DCRN_EXIER_BASE 0x042
-#define DCRN_EXISR_BASE 0x040
-#define DCRN_IOCR_BASE 0x0A0
-
-
-/* ------------------------------------------------------------------------- */
-#endif
-
-
-
-#ifdef DCRN_BE_BASE
-#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
-#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register*/
-#endif
-/* DCRN_BESR */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
-#define BESR_DMES 0x40000000 /* DMA Error Status */
-#define BESR_RWS 0x20000000 /* Read/Write Status */
-#define BESR_ETMASK 0x1C000000 /* Error Type */
-#define ET_PROT 0
-#define ET_PARITY 1
-#define ET_NCFG 2
-#define ET_BUSERR 4
-#define ET_BUSTO 6
-
-#ifdef DCRN_CHCR_BASE
-#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */
-#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */
-#endif
-#define CHR1_CETE 0x00800000 /* CPU external timer enable */
-#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
-
-#ifdef DCRN_CHPSR_BASE
-#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */
-#endif
-
-#ifdef DCRN_CIC_BASE
-#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
-#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */
-#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */
-#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */
-#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */
-#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */
-#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */
-#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */
-#endif
-
-#ifdef DCRN_CPMFR_BASE
-#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */
-#endif
-
-#ifndef CPM_AUD
-#define CPM_AUD 0x00000000
-#endif
-#ifndef CPM_BRG
-#define CPM_BRG 0x00000000
-#endif
-#ifndef CPM_CBS
-#define CPM_CBS 0x00000000
-#endif
-#ifndef CPM_CPU
-#define CPM_CPU 0x00000000
-#endif
-#ifndef CPM_DCP
-#define CPM_DCP 0x00000000
-#endif
-#ifndef CPM_DCRX
-#define CPM_DCRX 0x00000000
-#endif
-#ifndef CPM_DENC
-#define CPM_DENC 0x00000000
-#endif
-#ifndef CPM_DMA
-#define CPM_DMA 0x00000000
-#endif
-#ifndef CPM_DSCR
-#define CPM_DSCR 0x00000000
-#endif
-#ifndef CPM_EBC
-#define CPM_EBC 0x00000000
-#endif
-#ifndef CPM_EBIU
-#define CPM_EBIU 0x00000000
-#endif
-#ifndef CPM_EMAC_MM
-#define CPM_EMAC_MM 0x00000000
-#endif
-#ifndef CPM_EMAC_RM
-#define CPM_EMAC_RM 0x00000000
-#endif
-#ifndef CPM_EMAC_TM
-#define CPM_EMAC_TM 0x00000000
-#endif
-#ifndef CPM_GPIO0
-#define CPM_GPIO0 0x00000000
-#endif
-#ifndef CPM_GPT
-#define CPM_GPT 0x00000000
-#endif
-#ifndef CPM_I1284
-#define CPM_I1284 0x00000000
-#endif
-#ifndef CPM_IIC0
-#define CPM_IIC0 0x00000000
-#endif
-#ifndef CPM_IIC1
-#define CPM_IIC1 0x00000000
-#endif
-#ifndef CPM_MSI
-#define CPM_MSI 0x00000000
-#endif
-#ifndef CPM_PCI
-#define CPM_PCI 0x00000000
-#endif
-#ifndef CPM_PLB
-#define CPM_PLB 0x00000000
-#endif
-#ifndef CPM_SC0
-#define CPM_SC0 0x00000000
-#endif
-#ifndef CPM_SC1
-#define CPM_SC1 0x00000000
-#endif
-#ifndef CPM_SDRAM0
-#define CPM_SDRAM0 0x00000000
-#endif
-#ifndef CPM_SDRAM1
-#define CPM_SDRAM1 0x00000000
-#endif
-#ifndef CPM_TMRCLK
-#define CPM_TMRCLK 0x00000000
-#endif
-#ifndef CPM_UART0
-#define CPM_UART0 0x00000000
-#endif
-#ifndef CPM_UART1
-#define CPM_UART1 0x00000000
-#endif
-#ifndef CPM_UART2
-#define CPM_UART2 0x00000000
-#endif
-#ifndef CPM_UIC
-#define CPM_UIC 0x00000000
-#endif
-#ifndef CPM_VID2
-#define CPM_VID2 0x00000000
-#endif
-#ifndef CPM_XPT27
-#define CPM_XPT27 0x00000000
-#endif
-#ifndef CPM_XPT54
-#define CPM_XPT54 0x00000000
-#endif
-
-#ifdef DCRN_CPMSR_BASE
-#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */
-#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */
-#endif
-
-#ifdef DCRN_DCP0_BASE
-#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0) /* Decompression Controller Address */
-#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1) /* Decompression Controller Data */
-#endif
-
-#ifdef DCRN_DCRX_BASE
-#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */
-#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */
-#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */
-#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */
-#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */
-#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */
-#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */
-#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */
-#endif
-
-#ifdef DCRN_DMA0_BASE
-#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control Register 0 */
-#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */
-#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2) /* DMA Destination Address Register 0 */
-#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Source Address Register 0 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4) /* DMA Chained Count Register 0 */
-#endif
-
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 0 */
-#endif
-#endif
-
-#ifdef DCRN_DMA1_BASE
-#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control Register 1 */
-#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */
-#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2) /* DMA Destination Address Register 1 */
-#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */
-
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4) /* DMA Chained Count Register 1 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 1 */
-#endif
-#endif
-
-#ifdef DCRN_DMA2_BASE
-#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */
-#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */
-#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */
-#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */
-#endif
-#endif
-
-#ifdef DCRN_DMA3_BASE
-#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */
-#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */
-#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */
-#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */
-#endif
-#endif
-
-#ifdef DCRN_DMASR_BASE
-#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
-/* don't know if these two registers always exist if scatter/gather exists */
-#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
-#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
-#endif
-#endif
-
-#ifdef DCRN_EBC_BASE
-#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */
-#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */
-#endif
-
-#ifdef DCRN_EXIER_BASE
-#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */
-#endif
-
-#ifdef DCRN_EBIMC_BASE
-#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
-#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
-#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
-#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
-#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
-#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
-#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
-#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
-#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10)/* BRC 0 */
-#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11)/* BRC 1 */
-#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12)/* BRC 2 */
-#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13)/* BRC 3 */
-#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14)/* BRC 4 */
-#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15)/* BRC 5 */
-#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16)/* BRC 6 */
-#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17)/* BRC 7 */
-#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20)/* Bus Error Address Register */
-#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21)/* Bus Error Status Register */
-#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A)/* Bus Interfac Unit Ctrl Reg */
-#endif
-
-#ifdef DCRN_EXISR_BASE
-#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */
-#endif
-#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
-#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
-#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
-#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
-#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
-#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
-#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
-#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
-#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
-#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
-#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
-#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
-#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
-#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
-
-#ifdef DCRN_IOCR_BASE
-#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */
-#endif
-#define IOCR_E0TE 0x80000000
-#define IOCR_E0LP 0x40000000
-#define IOCR_E1TE 0x20000000
-#define IOCR_E1LP 0x10000000
-#define IOCR_E2TE 0x08000000
-#define IOCR_E2LP 0x04000000
-#define IOCR_E3TE 0x02000000
-#define IOCR_E3LP 0x01000000
-#define IOCR_E4TE 0x00800000
-#define IOCR_E4LP 0x00400000
-#define IOCR_EDT 0x00080000
-#define IOCR_SOR 0x00040000
-#define IOCR_EDO 0x00008000
-#define IOCR_2XC 0x00004000
-#define IOCR_ATC 0x00002000
-#define IOCR_SPD 0x00001000
-#define IOCR_BEM 0x00000800
-#define IOCR_PTD 0x00000400
-#define IOCR_ARE 0x00000080
-#define IOCR_DRC 0x00000020
-#define IOCR_RDM(x) (((x) & 0x3) << 3)
-#define IOCR_TCS 0x00000004
-#define IOCR_SCS 0x00000002
-#define IOCR_SPC 0x00000001
-
-#ifdef DCRN_MAL_BASE
-#define DCRN_MALCR (DCRN_MAL_BASE + 0x0) /* MAL Configuration */
-#define DCRN_MALDBR (DCRN_MAL_BASE + 0x3) /* Debug Register */
-#define DCRN_MALESR (DCRN_MAL_BASE + 0x1) /* Error Status */
-#define DCRN_MALIER (DCRN_MAL_BASE + 0x2) /* Interrupt Enable */
-#define DCRN_MALTXCARR (DCRN_MAL_BASE + 0x5) /* TX Channed Active Reset Register */
-#define DCRN_MALTXCASR (DCRN_MAL_BASE + 0x4) /* TX Channel Active Set Register */
-#define DCRN_MALTXDEIR (DCRN_MAL_BASE + 0x7) /* Tx Descriptor Error Interrupt */
-#define DCRN_MALTXEOBISR (DCRN_MAL_BASE + 0x6) /* Tx End of Buffer Interrupt Status */
-#define DCRN_MALRXCARR (DCRN_MAL_BASE + 0x11) /* RX Channed Active Reset Register */
-#define DCRN_MALRXCASR (DCRN_MAL_BASE + 0x10) /* RX Channel Active Set Register */
-#define DCRN_MALRXDEIR (DCRN_MAL_BASE + 0x13) /* Rx Descriptor Error Interrupt */
-#define DCRN_MALRXEOBISR (DCRN_MAL_BASE + 0x12) /* Rx End of Buffer Interrupt Status */
-#define DCRN_MALRXCTP0R (DCRN_MAL_BASE + 0x40) /* Channel Rx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP0R (DCRN_MAL_BASE + 0x20) /* Channel Tx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP1R (DCRN_MAL_BASE + 0x21) /* Channel Tx 1 Channel Table Pointer */
-#define DCRN_MALRCBS0 (DCRN_MAL_BASE + 0x60) /* Channel Rx 0 Channel Buffer Size */
-#endif
-/* DCRN_MALCR */
-#define MALCR_MMSR 0x80000000/* MAL Software reset */
-#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
-#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
-#define MALCR_PLBP_3 0x00C00000 /* highest */
-#define MALCR_GA 0x00200000 /* Guarded Active Bit */
-#define MALCR_OA 0x00100000 /* Ordered Active Bit */
-#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
-#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
-#define MALCR_PLBLT_2 0x00020000
-#define MALCR_PLBLT_3 0x00010000
-#define MALCR_PLBLT_4 0x00008000
-#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */
-#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
-#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
-#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
-#define MALCR_LEA 0x00000002 /* Locked Error Active */
-#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
-/* DCRN_MALESR */
-#define MALESR_EVB 0x80000000 /* Error Valid Bit */
-#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
-#define MALESR_DE 0x00100000 /* Descriptor Error */
-#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
-#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
-#define MALESR_OSE 0x00020000 /* OPB Slave Error */
-#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
-#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
-#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
-#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
-#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
-#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
-/* DCRN_MALIER */
-#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
-#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
-#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
-#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
-#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
-/* DCRN_MALTXEOBISR */
-#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
-#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
-
-#ifdef DCRN_OCM0_BASE
-#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
-#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
-#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
-#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
-#endif
-
-#ifdef DCRN_PLB0_BASE
-#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0)
-#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3)
-#endif
-
-#ifdef DCRN_PLB1_BASE
-#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0)
-#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2)
-#endif
-
-#ifdef DCRN_PLLMR_BASE
-#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */
-#endif
-
-#ifdef DCRN_POB0_BASE
-#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0)
-#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2)
-#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4)
-#endif
-
-#ifdef DCRN_SCCR_BASE
-#define DCRN_SCCR (DCRN_SCCR_BASE + 0x0)
-#endif
-
-#ifdef DCRN_SDRAM0_BASE
-#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Mem Ctrlr Address */
-#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Mem Ctrlr Data */
-#endif
-
-#ifdef DCRN_UIC0_BASE
-#define DCRN_UIC0_SR (DCRN_UIC0_BASE + 0x0)
-#define DCRN_UIC0_ER (DCRN_UIC0_BASE + 0x2)
-#define DCRN_UIC0_CR (DCRN_UIC0_BASE + 0x3)
-#define DCRN_UIC0_PR (DCRN_UIC0_BASE + 0x4)
-#define DCRN_UIC0_TR (DCRN_UIC0_BASE + 0x5)
-#define DCRN_UIC0_MSR (DCRN_UIC0_BASE + 0x6)
-#define DCRN_UIC0_VR (DCRN_UIC0_BASE + 0x7)
-#define DCRN_UIC0_VCR (DCRN_UIC0_BASE + 0x8)
-#endif
-
-#ifdef DCRN_UIC1_BASE
-#define DCRN_UIC1_SR (DCRN_UIC1_BASE + 0x0)
-#define DCRN_UIC1_SRS (DCRN_UIC1_BASE + 0x1)
-#define DCRN_UIC1_ER (DCRN_UIC1_BASE + 0x2)
-#define DCRN_UIC1_CR (DCRN_UIC1_BASE + 0x3)
-#define DCRN_UIC1_PR (DCRN_UIC1_BASE + 0x4)
-#define DCRN_UIC1_TR (DCRN_UIC1_BASE + 0x5)
-#define DCRN_UIC1_MSR (DCRN_UIC1_BASE + 0x6)
-#define DCRN_UIC1_VR (DCRN_UIC1_BASE + 0x7)
-#define DCRN_UIC1_VCR (DCRN_UIC1_BASE + 0x8)
-#endif
-
-#ifdef DCRN_SDRAM0_BASE
-#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */
-#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */
-#endif
-
-#ifdef DCRN_OCM0_BASE
-#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
-#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
-#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
-#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
-#endif
-
-#endif /* __ASM_IBM403_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm405.h b/include/asm-ppc/ibm405.h
deleted file mode 100644
index 4e5be9e2c153..000000000000
--- a/include/asm-ppc/ibm405.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405_H__
-#define __ASM_IBM405_H__
-
-#ifdef DCRN_BE_BASE
-#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
-#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
-#endif
-/* DCRN_BESR */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
-#define BESR_DMES 0x40000000 /* DMA Error Status */
-#define BESR_RWS 0x20000000 /* Read/Write Status */
-#define BESR_ETMASK 0x1C000000 /* Error Type */
-#define ET_PROT 0
-#define ET_PARITY 1
-#define ET_NCFG 2
-#define ET_BUSERR 4
-#define ET_BUSTO 6
-
-/* Clock and power management shifts for emacs */
-#define IBM_CPM_EMMII 0 /* Shift value for MII */
-#define IBM_CPM_EMRX 1 /* Shift value for recv */
-#define IBM_CPM_EMTX 2 /* Shift value for MAC */
-
-#ifdef DCRN_CHCR_BASE
-#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */
-#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */
-#endif
-#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
-
-#ifdef DCRN_CHPSR_BASE
-#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */
-#endif
-
-#ifdef DCRN_CPMFR_BASE
-#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */
-#endif
-
-#ifdef DCRN_CPMSR_BASE
-#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */
-#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */
-#endif
-
-#ifdef DCRN_DCP0_BASE
-/* Decompression Controller Address */
-#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0)
-/* Decompression Controller Data */
-#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1)
-#else
-#define DCRN_DCP0_CFGADDR 0x0
-#define DCRN_DCP0_CFGDATA 0x0
-#endif
-
-#ifdef DCRN_DMA0_BASE
-/* DMA Channel Control Register 0 */
-#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0)
-#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */
-/* DMA Destination Address Register 0 */
-#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2)
-/* DMA Source Address Register 0 */
-#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3)
-#ifdef DCRNCAP_DMA_CC
-/* DMA Chained Count Register 0 */
-#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4)
-#endif
-#ifdef DCRNCAP_DMA_SG
-/* DMA Scatter/Gather Descriptor Addr 0 */
-#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4)
-#endif
-#endif
-
-#ifdef DCRN_DMA1_BASE
-/* DMA Channel Control Register 1 */
-#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0)
-#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */
-/* DMA Destination Address Register 1 */
-#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2)
-/* DMA Source Address Register 1 */
-#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */
-#ifdef DCRNCAP_DMA_CC
-/* DMA Chained Count Register 1 */
-#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4)
-#endif
-#ifdef DCRNCAP_DMA_SG
-/* DMA Scatter/Gather Descriptor Addr 1 */
-#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4)
-#endif
-#endif
-
-#ifdef DCRN_DMA2_BASE
-#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */
-#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */
-#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */
-#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */
-#endif
-#endif
-
-#ifdef DCRN_DMA3_BASE
-#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */
-#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */
-#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */
-#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */
-#ifdef DCRNCAP_DMA_CC
-#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */
-#endif
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */
-#endif
-#endif
-
-#ifdef DCRN_DMASR_BASE
-#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
-#ifdef DCRNCAP_DMA_SG
-#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
-/* don't know if these two registers always exist if scatter/gather exists */
-#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
-#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
-#endif
-#endif
-
-#ifdef DCRN_EBC_BASE
-#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */
-#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */
-#endif
-
-#ifdef DCRN_EXIER_BASE
-#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */
-#endif
-
-#ifdef DCRN_EXISR_BASE
-#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */
-#endif
-
-#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */
-#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */
-#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */
-#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */
-#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */
-#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */
-#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */
-#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */
-#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */
-#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */
-#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */
-#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */
-#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */
-#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */
-
-#ifdef DCRN_IOCR_BASE
-#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */
-#endif
-#define IOCR_E0TE 0x80000000
-#define IOCR_E0LP 0x40000000
-#define IOCR_E1TE 0x20000000
-#define IOCR_E1LP 0x10000000
-#define IOCR_E2TE 0x08000000
-#define IOCR_E2LP 0x04000000
-#define IOCR_E3TE 0x02000000
-#define IOCR_E3LP 0x01000000
-#define IOCR_E4TE 0x00800000
-#define IOCR_E4LP 0x00400000
-#define IOCR_EDT 0x00080000
-#define IOCR_SOR 0x00040000
-#define IOCR_EDO 0x00008000
-#define IOCR_2XC 0x00004000
-#define IOCR_ATC 0x00002000
-#define IOCR_SPD 0x00001000
-#define IOCR_BEM 0x00000800
-#define IOCR_PTD 0x00000400
-#define IOCR_ARE 0x00000080
-#define IOCR_DRC 0x00000020
-#define IOCR_RDM(x) (((x) & 0x3) << 3)
-#define IOCR_TCS 0x00000004
-#define IOCR_SCS 0x00000002
-#define IOCR_SPC 0x00000001
-
-#define DCRN_MALCR(base) (base + 0x0) /* MAL Configuration */
-#define DCRN_MALDBR(base) ((base) + 0x3) /* Debug Register */
-#define DCRN_MALESR(base) ((base) + 0x1) /* Error Status */
-#define DCRN_MALIER(base) ((base) + 0x2) /* Interrupt Enable */
-#define DCRN_MALTXCARR(base) ((base) + 0x5) /* TX Channed Active Reset Register */
-#define DCRN_MALTXCASR(base) ((base) + 0x4) /* TX Channel Active Set Register */
-#define DCRN_MALTXDEIR(base) ((base) + 0x7) /* Tx Descriptor Error Interrupt */
-#define DCRN_MALTXEOBISR(base) ((base) + 0x6) /* Tx End of Buffer Interrupt Status */
-#define DCRN_MALRXCARR(base) ((base) + 0x11) /* RX Channed Active Reset Register */
-#define DCRN_MALRXCASR(base) ((base) + 0x10) /* RX Channel Active Set Register */
-#define DCRN_MALRXDEIR(base) ((base) + 0x13) /* Rx Descriptor Error Interrupt */
-#define DCRN_MALRXEOBISR(base) ((base) + 0x12) /* Rx End of Buffer Interrupt Status */
-#define DCRN_MALRXCTP0R(base) ((base) + 0x40) /* Channel Rx 0 Channel Table Pointer */
-#define DCRN_MALRXCTP1R(base) ((base) + 0x41) /* Channel Rx 1 Channel Table Pointer */
-#define DCRN_MALTXCTP0R(base) ((base) + 0x20) /* Channel Tx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP1R(base) ((base) + 0x21) /* Channel Tx 1 Channel Table Pointer */
-#define DCRN_MALTXCTP2R(base) ((base) + 0x22) /* Channel Tx 2 Channel Table Pointer */
-#define DCRN_MALTXCTP3R(base) ((base) + 0x23) /* Channel Tx 3 Channel Table Pointer */
-#define DCRN_MALRCBS0(base) ((base) + 0x60) /* Channel Rx 0 Channel Buffer Size */
-#define DCRN_MALRCBS1(base) ((base) + 0x61) /* Channel Rx 1 Channel Buffer Size */
-
- /* DCRN_MALCR */
-#define MALCR_MMSR 0x80000000 /* MAL Software reset */
-#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
-#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
-#define MALCR_PLBP_3 0x00C00000 /* highest */
-#define MALCR_GA 0x00200000 /* Guarded Active Bit */
-#define MALCR_OA 0x00100000 /* Ordered Active Bit */
-#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
-#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
-#define MALCR_PLBLT_2 0x00020000
-#define MALCR_PLBLT_3 0x00010000
-#define MALCR_PLBLT_4 0x00008000
-#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */
-#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
-#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
-#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
-#define MALCR_LEA 0x00000002 /* Locked Error Active */
-#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
-/* DCRN_MALESR */
-#define MALESR_EVB 0x80000000 /* Error Valid Bit */
-#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
-#define MALESR_DE 0x00100000 /* Descriptor Error */
-#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
-#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
-#define MALESR_OSE 0x00020000 /* OPB Slave Error */
-#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
-#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
-#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
-#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
-#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
-#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
-/* DCRN_MALIER */
-#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
-#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
-#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
-#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
-#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
-/* DCRN_MALTXEOBISR */
-#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
-#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
-
-#ifdef DCRN_PLB0_BASE
-#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0)
-#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3)
-#endif
-
-#ifdef DCRN_PLB1_BASE
-#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0)
-#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1)
-/* doesn't exist on stb03xxx? */
-#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2)
-#endif
-
-#ifdef DCRN_PLLMR_BASE
-#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */
-#endif
-
-#ifdef DCRN_POB0_BASE
-#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0)
-#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2)
-#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4)
-#endif
-
-#define DCRN_UIC_SR(base) (base + 0x0)
-#define DCRN_UIC_ER(base) (base + 0x2)
-#define DCRN_UIC_CR(base) (base + 0x3)
-#define DCRN_UIC_PR(base) (base + 0x4)
-#define DCRN_UIC_TR(base) (base + 0x5)
-#define DCRN_UIC_MSR(base) (base + 0x6)
-#define DCRN_UIC_VR(base) (base + 0x7)
-#define DCRN_UIC_VCR(base) (base + 0x8)
-
-#ifdef DCRN_SDRAM0_BASE
-#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */
-#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */
-#endif
-
-#ifdef DCRN_OCM0_BASE
-#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */
-#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */
-#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */
-#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */
-#endif
-
-#endif /* __ASM_IBM405_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
deleted file mode 100644
index 7818b54b6e37..000000000000
--- a/include/asm-ppc/ibm44x.h
+++ /dev/null
@@ -1,674 +0,0 @@
-/*
- * include/asm-ppc/ibm44x.h
- *
- * PPC44x definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM44x_H__
-#define __ASM_IBM44x_H__
-
-
-#ifndef NR_BOARD_IRQS
-#define NR_BOARD_IRQS 0
-#endif
-
-#define _IO_BASE isa_io_base
-#define _ISA_MEM_BASE isa_mem_base
-#define PCI_DRAM_OFFSET pci_dram_offset
-
-/* TLB entry offset/size used for pinning kernel lowmem */
-#define PPC44x_PIN_SHIFT 28
-#define PPC_PIN_SIZE (1 << PPC44x_PIN_SHIFT)
-
-/* Lowest TLB slot consumed by the default pinned TLBs */
-#define PPC44x_LOW_SLOT 63
-
-/*
- * Least significant 32-bits and extended real page number (ERPN) of
- * UART0 physical address location for early serial text debug
- */
-#if defined(CONFIG_440SP)
-#define UART0_PHYS_ERPN 1
-#define UART0_PHYS_IO_BASE 0xf0000200
-#elif defined(CONFIG_440SPE)
-#define UART0_PHYS_ERPN 4
-#define UART0_PHYS_IO_BASE 0xf0000200
-#elif defined(CONFIG_440EP)
-#define UART0_PHYS_IO_BASE 0xe0000000
-#else
-#define UART0_PHYS_ERPN 1
-#define UART0_PHYS_IO_BASE 0x40000200
-#endif
-
-/*
- * XXX This 36-bit trap stuff will move somewhere in syslib/
- * when we rework/abstract the PPC44x PCI-X handling -mdp
- */
-
-/*
- * Standard 4GB "page" definitions
- */
-#if defined(CONFIG_440SP)
-#define PPC44x_IO_PAGE 0x0000000100000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000900000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000a00000000ULL
-#elif defined(CONFIG_440SPE)
-#define PPC44x_IO_PAGE 0x0000000400000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000c00000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000d00000000ULL
-#elif defined(CONFIG_440EP)
-#define PPC44x_IO_PAGE 0x0000000000000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000000000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000000000000ULL
-#else
-#define PPC44x_IO_PAGE 0x0000000100000000ULL
-#define PPC44x_PCICFG_PAGE 0x0000000200000000ULL
-#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
-#define PPC44x_PCIMEM_PAGE 0x0000000300000000ULL
-#endif
-
-/*
- * 36-bit trap ranges
- */
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define PPC44x_IO_LO 0xf0000000UL
-#define PPC44x_IO_HI 0xf0000fffUL
-#define PPC44x_PCI0CFG_LO 0x0ec00000UL
-#define PPC44x_PCI0CFG_HI 0x0ec00007UL
-#define PPC44x_PCI1CFG_LO 0x1ec00000UL
-#define PPC44x_PCI1CFG_HI 0x1ec00007UL
-#define PPC44x_PCI2CFG_LO 0x2ec00000UL
-#define PPC44x_PCI2CFG_HI 0x2ec00007UL
-#define PPC44x_PCIMEM_LO 0x80000000UL
-#define PPC44x_PCIMEM_HI 0xdfffffffUL
-#elif defined(CONFIG_440EP)
-#define PPC44x_IO_LO 0xef500000UL
-#define PPC44x_IO_HI 0xefffffffUL
-#define PPC44x_PCI0CFG_LO 0xeec00000UL
-#define PPC44x_PCI0CFG_HI 0xeecfffffUL
-#define PPC44x_PCIMEM_LO 0xa0000000UL
-#define PPC44x_PCIMEM_HI 0xdfffffffUL
-#else
-#define PPC44x_IO_LO 0x40000000UL
-#define PPC44x_IO_HI 0x40000fffUL
-#define PPC44x_PCI0CFG_LO 0x0ec00000UL
-#define PPC44x_PCI0CFG_HI 0x0ec00007UL
-#define PPC44x_PCIMEM_LO 0x80002000UL
-#define PPC44x_PCIMEM_HI 0xffffffffUL
-#endif
-
-/*
- * The "residual" board information structure the boot loader passes
- * into the kernel.
- */
-#ifndef __ASSEMBLY__
-
-/*
- * DCRN definitions
- */
-
-
-/* CPRs (440GX and 440SP/440SPe) */
-#define DCRN_CPR_CONFIG_ADDR 0xc
-#define DCRN_CPR_CONFIG_DATA 0xd
-
-#define DCRN_CPR_CLKUPD 0x0020
-#define DCRN_CPR_PLLC 0x0040
-#define DCRN_CPR_PLLD 0x0060
-#define DCRN_CPR_PRIMAD 0x0080
-#define DCRN_CPR_PRIMBD 0x00a0
-#define DCRN_CPR_OPBD 0x00c0
-#define DCRN_CPR_PERD 0x00e0
-#define DCRN_CPR_MALD 0x0100
-
-/* CPRs read/write helper macros */
-#define CPR_READ(offset) ({\
- mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
- mfdcr(DCRN_CPR_CONFIG_DATA);})
-#define CPR_WRITE(offset, data) ({\
- mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
- mtdcr(DCRN_CPR_CONFIG_DATA, data);})
-
-/* SDRs (440GX and 440SP/440SPe) */
-#define DCRN_SDR_CONFIG_ADDR 0xe
-#define DCRN_SDR_CONFIG_DATA 0xf
-#define DCRN_SDR_PFC0 0x4100
-#define DCRN_SDR_PFC1 0x4101
-#define DCRN_SDR_PFC1_EPS 0x1c00000
-#define DCRN_SDR_PFC1_EPS_SHIFT 22
-#define DCRN_SDR_PFC1_RMII 0x02000000
-#define DCRN_SDR_MFR 0x4300
-#define DCRN_SDR_MFR_TAH0 0x80000000 /* TAHOE0 Enable */
-#define DCRN_SDR_MFR_TAH1 0x40000000 /* TAHOE1 Enable */
-#define DCRN_SDR_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */
-#define DCRN_SDR_MFR_ECS 0x08000000 /* EMAC int clk */
-#define DCRN_SDR_MFR_T0TXFL 0x00080000
-#define DCRN_SDR_MFR_T0TXFH 0x00040000
-#define DCRN_SDR_MFR_T1TXFL 0x00020000
-#define DCRN_SDR_MFR_T1TXFH 0x00010000
-#define DCRN_SDR_MFR_E0TXFL 0x00008000
-#define DCRN_SDR_MFR_E0TXFH 0x00004000
-#define DCRN_SDR_MFR_E0RXFL 0x00002000
-#define DCRN_SDR_MFR_E0RXFH 0x00001000
-#define DCRN_SDR_MFR_E1TXFL 0x00000800
-#define DCRN_SDR_MFR_E1TXFH 0x00000400
-#define DCRN_SDR_MFR_E1RXFL 0x00000200
-#define DCRN_SDR_MFR_E1RXFH 0x00000100
-#define DCRN_SDR_MFR_E2TXFL 0x00000080
-#define DCRN_SDR_MFR_E2TXFH 0x00000040
-#define DCRN_SDR_MFR_E2RXFL 0x00000020
-#define DCRN_SDR_MFR_E2RXFH 0x00000010
-#define DCRN_SDR_MFR_E3TXFL 0x00000008
-#define DCRN_SDR_MFR_E3TXFH 0x00000004
-#define DCRN_SDR_MFR_E3RXFL 0x00000002
-#define DCRN_SDR_MFR_E3RXFH 0x00000001
-#define DCRN_SDR_UART0 0x0120
-#define DCRN_SDR_UART1 0x0121
-
-#ifdef CONFIG_440EP
-#define DCRN_SDR_UART2 0x0122
-#define DCRN_SDR_UART3 0x0123
-#define DCRN_SDR_CUST0 0x4000
-#endif
-
-/* SDR read/write helper macros */
-#define SDR_READ(offset) ({\
- mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
- mfdcr(DCRN_SDR_CONFIG_DATA);})
-#define SDR_WRITE(offset, data) ({\
- mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
- mtdcr(DCRN_SDR_CONFIG_DATA,data);})
-
-/* DMA (excluding 440SP/440SPe) */
-#define DCRN_DMA0_BASE 0x100
-#define DCRN_DMA1_BASE 0x108
-#define DCRN_DMA2_BASE 0x110
-#define DCRN_DMA3_BASE 0x118
-#define DCRN_DMASR_BASE 0x120
-#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
-#define DCRN_MAL_BASE 0x180
-
-#ifdef CONFIG_440EP
-#define DCRN_DMA2P40_BASE 0x300
-#define DCRN_DMA2P41_BASE 0x308
-#define DCRN_DMA2P42_BASE 0x310
-#define DCRN_DMA2P43_BASE 0x318
-#define DCRN_DMA2P4SR_BASE 0x320
-#endif
-
-/* UIC */
-#define DCRN_UIC0_BASE 0xc0
-#define DCRN_UIC1_BASE 0xd0
-#define UIC0 DCRN_UIC0_BASE
-#define UIC1 DCRN_UIC1_BASE
-
-#ifdef CONFIG_440SPE
-#define DCRN_UIC2_BASE 0xe0
-#define DCRN_UIC3_BASE 0xf0
-#define UIC2 DCRN_UIC2_BASE
-#define UIC3 DCRN_UIC3_BASE
-#else
-#define DCRN_UIC2_BASE 0x210
-#define DCRN_UICB_BASE 0x200
-#define UIC2 DCRN_UIC2_BASE
-#define UICB DCRN_UICB_BASE
-#endif
-
-#define DCRN_UIC_SR(base) (base + 0x0)
-#define DCRN_UIC_ER(base) (base + 0x2)
-#define DCRN_UIC_CR(base) (base + 0x3)
-#define DCRN_UIC_PR(base) (base + 0x4)
-#define DCRN_UIC_TR(base) (base + 0x5)
-#define DCRN_UIC_MSR(base) (base + 0x6)
-#define DCRN_UIC_VR(base) (base + 0x7)
-#define DCRN_UIC_VCR(base) (base + 0x8)
-
-#define UIC0_UIC1NC 0x00000002
-
-#ifdef CONFIG_440SPE
-#define UIC0_UIC1NC 0x00000002
-#define UIC0_UIC2NC 0x00200000
-#define UIC0_UIC3NC 0x00008000
-#endif
-
-#define UICB_UIC0NC 0x40000000
-#define UICB_UIC1NC 0x10000000
-#define UICB_UIC2NC 0x04000000
-
-/* 440 MAL DCRs */
-#define DCRN_MALCR(base) (base + 0x0) /* Configuration */
-#define DCRN_MALESR(base) (base + 0x1) /* Error Status */
-#define DCRN_MALIER(base) (base + 0x2) /* Interrupt Enable */
-#define DCRN_MALTXCASR(base) (base + 0x4) /* Tx Channel Active Set */
-#define DCRN_MALTXCARR(base) (base + 0x5) /* Tx Channel Active Reset */
-#define DCRN_MALTXEOBISR(base) (base + 0x6) /* Tx End of Buffer Interrupt Status */
-#define DCRN_MALTXDEIR(base) (base + 0x7) /* Tx Descriptor Error Interrupt */
-#define DCRN_MALRXCASR(base) (base + 0x10) /* Rx Channel Active Set */
-#define DCRN_MALRXCARR(base) (base + 0x11) /* Rx Channel Active Reset */
-#define DCRN_MALRXEOBISR(base) (base + 0x12) /* Rx End of Buffer Interrupt Status */
-#define DCRN_MALRXDEIR(base) (base + 0x13) /* Rx Descriptor Error Interrupt */
-#define DCRN_MALTXCTP0R(base) (base + 0x20) /* Channel Tx 0 Channel Table Pointer */
-#define DCRN_MALTXCTP1R(base) (base + 0x21) /* Channel Tx 1 Channel Table Pointer */
-#define DCRN_MALTXCTP2R(base) (base + 0x22) /* Channel Tx 2 Channel Table Pointer */
-#define DCRN_MALTXCTP3R(base) (base + 0x23) /* Channel Tx 3 Channel Table Pointer */
-#define DCRN_MALRXCTP0R(base) (base + 0x40) /* Channel Rx 0 Channel Table Pointer */
-#define DCRN_MALRXCTP1R(base) (base + 0x41) /* Channel Rx 1 Channel Table Pointer */
-#define DCRN_MALRCBS0(base) (base + 0x60) /* Channel Rx 0 Channel Buffer Size */
-#define DCRN_MALRCBS1(base) (base + 0x61) /* Channel Rx 1 Channel Buffer Size */
-
-/* Compatibility DCRN's */
-#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
-#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
-#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
-#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
-#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
-#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
-#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
-#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
-
-#define MALCR_MMSR 0x80000000 /* MAL Software reset */
-#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
-#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */
-#define MALCR_PLBP_3 0x00C00000 /* highest */
-#define MALCR_GA 0x00200000 /* Guarded Active Bit */
-#define MALCR_OA 0x00100000 /* Ordered Active Bit */
-#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */
-#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */
-#define MALCR_PLBLT_2 0x00020000
-#define MALCR_PLBLT_3 0x00010000
-#define MALCR_PLBLT_4 0x00008000
-#ifdef CONFIG_440GP
-#define MALCR_PLBLT_DEFAULT 0x00330000 /* PLB Latency Timer default */
-#else
-#define MALCR_PLBLT_DEFAULT 0x00ff0000 /* PLB Latency Timer default */
-#endif
-#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */
-#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */
-#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */
-#define MALCR_LEA 0x00000002 /* Locked Error Active */
-#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */
-/* DCRN_MALESR */
-#define MALESR_EVB 0x80000000 /* Error Valid Bit */
-#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */
-#define MALESR_DE 0x00100000 /* Descriptor Error */
-#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */
-#define MALESR_OTE 0x00040000 /* OPB Timeout Error */
-#define MALESR_OSE 0x00020000 /* OPB Slave Error */
-#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */
-#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */
-#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */
-#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */
-#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */
-#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */
-/* DCRN_MALIER */
-#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */
-#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */
-#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */
-#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */
-#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */
-/* DCRN_MALTXEOBISR */
-#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */
-#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-/* 440SP/440SPe PLB Arbiter DCRs */
-#define DCRN_PLB_REVID 0x080 /* PLB Revision ID */
-#define DCRN_PLB_CCR 0x088 /* PLB Crossbar Control */
-
-#define DCRN_PLB0_ACR 0x081 /* PLB Arbiter Control */
-#define DCRN_PLB0_BESRL 0x082 /* PLB Error Status */
-#define DCRN_PLB0_BESRH 0x083 /* PLB Error Status */
-#define DCRN_PLB0_BEARL 0x084 /* PLB Error Address Low */
-#define DCRN_PLB0_BEARH 0x085 /* PLB Error Address High */
-
-#define DCRN_PLB1_ACR 0x089 /* PLB Arbiter Control */
-#define DCRN_PLB1_BESRL 0x08a /* PLB Error Status */
-#define DCRN_PLB1_BESRH 0x08b /* PLB Error Status */
-#define DCRN_PLB1_BEARL 0x08c /* PLB Error Address Low */
-#define DCRN_PLB1_BEARH 0x08d /* PLB Error Address High */
-#else
-/* 440GP/GX PLB Arbiter DCRs */
-#define DCRN_PLB0_REVID 0x082 /* PLB Arbiter Revision ID */
-#define DCRN_PLB0_ACR 0x083 /* PLB Arbiter Control */
-#define DCRN_PLB0_BESR 0x084 /* PLB Error Status */
-#define DCRN_PLB0_BEARL 0x086 /* PLB Error Address Low */
-#define DCRN_PLB0_BEAR DCRN_PLB0_BEARL /* 40x compatibility */
-#define DCRN_PLB0_BEARH 0x087 /* PLB Error Address High */
-#endif
-
-/* 440GP/GX PLB to OPB bridge DCRs */
-#define DCRN_POB0_BESR0 0x090
-#define DCRN_POB0_BESR1 0x094
-#define DCRN_POB0_BEARL 0x092
-#define DCRN_POB0_BEARH 0x093
-
-/* 440GP/GX OPB to PLB bridge DCRs */
-#define DCRN_OPB0_BSTAT 0x0a9
-#define DCRN_OPB0_BEARL 0x0aa
-#define DCRN_OPB0_BEARH 0x0ab
-
-/* 440GP Clock, PM, chip control */
-#define DCRN_CPC0_SR 0x0b0
-#define DCRN_CPC0_ER 0x0b1
-#define DCRN_CPC0_FR 0x0b2
-#define DCRN_CPC0_SYS0 0x0e0
-#define DCRN_CPC0_SYS1 0x0e1
-#define DCRN_CPC0_CUST0 0x0e2
-#define DCRN_CPC0_CUST1 0x0e3
-#define DCRN_CPC0_STRP0 0x0e4
-#define DCRN_CPC0_STRP1 0x0e5
-#define DCRN_CPC0_STRP2 0x0e6
-#define DCRN_CPC0_STRP3 0x0e7
-#define DCRN_CPC0_GPIO 0x0e8
-#define DCRN_CPC0_PLB 0x0e9
-#define DCRN_CPC0_CR1 0x0ea
-#define DCRN_CPC0_CR0 0x0eb
-#define DCRN_CPC0_MIRQ0 0x0ec
-#define DCRN_CPC0_MIRQ1 0x0ed
-#define DCRN_CPC0_JTAGID 0x0ef
-
-/* 440GP DMA controller DCRs */
-#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control 0 */
-#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count 0 */
-#define DCRN_DMASAH0 (DCRN_DMA0_BASE + 0x2) /* DMA Src Addr High 0 */
-#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Src Addr Low 0 */
-#define DCRN_DMADAH0 (DCRN_DMA0_BASE + 0x4) /* DMA Dest Addr High 0 */
-#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x5) /* DMA Dest Addr Low 0 */
-#define DCRN_ASGH0 (DCRN_DMA0_BASE + 0x6) /* DMA SG Desc Addr High 0 */
-#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x7) /* DMA SG Desc Addr Low 0 */
-
-#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control 1 */
-#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count 1 */
-#define DCRN_DMASAH1 (DCRN_DMA1_BASE + 0x2) /* DMA Src Addr High 1 */
-#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Src Addr Low 1 */
-#define DCRN_DMADAH1 (DCRN_DMA1_BASE + 0x4) /* DMA Dest Addr High 1 */
-#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x5) /* DMA Dest Addr Low 1 */
-#define DCRN_ASGH1 (DCRN_DMA1_BASE + 0x6) /* DMA SG Desc Addr High 1 */
-#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x7) /* DMA SG Desc Addr Low 1 */
-
-#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control 2 */
-#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count 2 */
-#define DCRN_DMASAH2 (DCRN_DMA2_BASE + 0x2) /* DMA Src Addr High 2 */
-#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Src Addr Low 2 */
-#define DCRN_DMADAH2 (DCRN_DMA2_BASE + 0x4) /* DMA Dest Addr High 2 */
-#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x5) /* DMA Dest Addr Low 2 */
-#define DCRN_ASGH2 (DCRN_DMA2_BASE + 0x6) /* DMA SG Desc Addr High 2 */
-#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x7) /* DMA SG Desc Addr Low 2 */
-
-#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control 3 */
-#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count 3 */
-#define DCRN_DMASAH3 (DCRN_DMA3_BASE + 0x2) /* DMA Src Addr High 3 */
-#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Src Addr Low 3 */
-#define DCRN_DMADAH3 (DCRN_DMA3_BASE + 0x4) /* DMA Dest Addr High 3 */
-#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x5) /* DMA Dest Addr Low 3 */
-#define DCRN_ASGH3 (DCRN_DMA3_BASE + 0x6) /* DMA SG Desc Addr High 3 */
-#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x7) /* DMA SG Desc Addr Low 3 */
-
-#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */
-#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */
-#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */
-#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */
-
-/* 440GP/440GX SDRAM controller DCRs */
-#define DCRN_SDRAM0_CFGADDR 0x010
-#define DCRN_SDRAM0_CFGDATA 0x011
-
-#define SDRAM0_B0CR 0x40
-#define SDRAM0_B1CR 0x44
-#define SDRAM0_B2CR 0x48
-#define SDRAM0_B3CR 0x4c
-
-#define SDRAM_CONFIG_BANK_ENABLE 0x00000001
-#define SDRAM_CONFIG_SIZE_MASK 0x000e0000
-#define SDRAM_CONFIG_BANK_SIZE(reg) ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17)
-#define SDRAM_CONFIG_SIZE_8M 0x00000001
-#define SDRAM_CONFIG_SIZE_16M 0x00000002
-#define SDRAM_CONFIG_SIZE_32M 0x00000003
-#define SDRAM_CONFIG_SIZE_64M 0x00000004
-#define SDRAM_CONFIG_SIZE_128M 0x00000005
-#define SDRAM_CONFIG_SIZE_256M 0x00000006
-#define SDRAM_CONFIG_SIZE_512M 0x00000007
-#define PPC44x_MEM_SIZE_8M 0x00800000
-#define PPC44x_MEM_SIZE_16M 0x01000000
-#define PPC44x_MEM_SIZE_32M 0x02000000
-#define PPC44x_MEM_SIZE_64M 0x04000000
-#define PPC44x_MEM_SIZE_128M 0x08000000
-#define PPC44x_MEM_SIZE_256M 0x10000000
-#define PPC44x_MEM_SIZE_512M 0x20000000
-#define PPC44x_MEM_SIZE_1G 0x40000000
-#define PPC44x_MEM_SIZE_2G 0x80000000
-
-/* 440SP/440SPe memory controller DCRs */
-#define DCRN_MQ0_BS0BAS 0x40
-#if defined(CONFIG_440SP)
-#define MQ0_NUM_BANKS 2
-#elif defined(CONFIG_440SPE)
-#define MQ0_NUM_BANKS 4
-#endif
-
-#define MQ0_CONFIG_SIZE_MASK 0x0000fff0
-#define MQ0_CONFIG_SIZE_8M 0x0000ffc0
-#define MQ0_CONFIG_SIZE_16M 0x0000ff80
-#define MQ0_CONFIG_SIZE_32M 0x0000ff00
-#define MQ0_CONFIG_SIZE_64M 0x0000fe00
-#define MQ0_CONFIG_SIZE_128M 0x0000fc00
-#define MQ0_CONFIG_SIZE_256M 0x0000f800
-#define MQ0_CONFIG_SIZE_512M 0x0000f000
-#define MQ0_CONFIG_SIZE_1G 0x0000e000
-#define MQ0_CONFIG_SIZE_2G 0x0000c000
-#define MQ0_CONFIG_SIZE_4G 0x00008000
-
-/* Internal SRAM Controller 440GX/440SP/440SPe */
-#define DCRN_SRAM0_BASE 0x000
-
-#define DCRN_SRAM0_SB0CR (DCRN_SRAM0_BASE + 0x020)
-#define DCRN_SRAM0_SB1CR (DCRN_SRAM0_BASE + 0x021)
-#define DCRN_SRAM0_SB2CR (DCRN_SRAM0_BASE + 0x022)
-#define DCRN_SRAM0_SB3CR (DCRN_SRAM0_BASE + 0x023)
-#define SRAM_SBCR_BAS0 0x80000000
-#define SRAM_SBCR_BAS1 0x80010000
-#define SRAM_SBCR_BAS2 0x80020000
-#define SRAM_SBCR_BAS3 0x80030000
-#define SRAM_SBCR_BU_MASK 0x00000180
-#define SRAM_SBCR_BS_64KB 0x00000800
-#define SRAM_SBCR_BU_RO 0x00000080
-#define SRAM_SBCR_BU_RW 0x00000180
-#define DCRN_SRAM0_BEAR (DCRN_SRAM0_BASE + 0x024)
-#define DCRN_SRAM0_BESR0 (DCRN_SRAM0_BASE + 0x025)
-#define DCRN_SRAM0_BESR1 (DCRN_SRAM0_BASE + 0x026)
-#define DCRN_SRAM0_PMEG (DCRN_SRAM0_BASE + 0x027)
-#define DCRN_SRAM0_CID (DCRN_SRAM0_BASE + 0x028)
-#define DCRN_SRAM0_REVID (DCRN_SRAM0_BASE + 0x029)
-#define DCRN_SRAM0_DPC (DCRN_SRAM0_BASE + 0x02a)
-#define SRAM_DPC_ENABLE 0x80000000
-
-/* L2 Cache Controller 440GX/440SP/440SPe */
-#define DCRN_L2C0_CFG 0x030
-#define L2C_CFG_L2M 0x80000000
-#define L2C_CFG_ICU 0x40000000
-#define L2C_CFG_DCU 0x20000000
-#define L2C_CFG_DCW_MASK 0x1e000000
-#define L2C_CFG_TPC 0x01000000
-#define L2C_CFG_CPC 0x00800000
-#define L2C_CFG_FRAN 0x00200000
-#define L2C_CFG_SS_MASK 0x00180000
-#define L2C_CFG_SS_256 0x00000000
-#define L2C_CFG_CPIM 0x00040000
-#define L2C_CFG_TPIM 0x00020000
-#define L2C_CFG_LIM 0x00010000
-#define L2C_CFG_PMUX_MASK 0x00007000
-#define L2C_CFG_PMUX_SNP 0x00000000
-#define L2C_CFG_PMUX_IF 0x00001000
-#define L2C_CFG_PMUX_DF 0x00002000
-#define L2C_CFG_PMUX_DS 0x00003000
-#define L2C_CFG_PMIM 0x00000800
-#define L2C_CFG_TPEI 0x00000400
-#define L2C_CFG_CPEI 0x00000200
-#define L2C_CFG_NAM 0x00000100
-#define L2C_CFG_SMCM 0x00000080
-#define L2C_CFG_NBRM 0x00000040
-#define DCRN_L2C0_CMD 0x031
-#define L2C_CMD_CLR 0x80000000
-#define L2C_CMD_DIAG 0x40000000
-#define L2C_CMD_INV 0x20000000
-#define L2C_CMD_CCP 0x10000000
-#define L2C_CMD_CTE 0x08000000
-#define L2C_CMD_STRC 0x04000000
-#define L2C_CMD_STPC 0x02000000
-#define L2C_CMD_RPMC 0x01000000
-#define L2C_CMD_HCC 0x00800000
-#define DCRN_L2C0_ADDR 0x032
-#define DCRN_L2C0_DATA 0x033
-#define DCRN_L2C0_SR 0x034
-#define L2C_SR_CC 0x80000000
-#define L2C_SR_CPE 0x40000000
-#define L2C_SR_TPE 0x20000000
-#define L2C_SR_LRU 0x10000000
-#define L2C_SR_PCS 0x08000000
-#define DCRN_L2C0_REVID 0x035
-#define DCRN_L2C0_SNP0 0x036
-#define DCRN_L2C0_SNP1 0x037
-#define L2C_SNP_BA_MASK 0xffff0000
-#define L2C_SNP_SSR_MASK 0x0000f000
-#define L2C_SNP_SSR_32G 0x0000f000
-#define L2C_SNP_ESR 0x00000800
-
-/*
- * PCI-X definitions
- */
-#define PCIX0_CFGA 0x0ec00000UL
-#define PCIX1_CFGA 0x1ec00000UL
-#define PCIX2_CFGA 0x2ec00000UL
-#define PCIX0_CFGD 0x0ec00004UL
-#define PCIX1_CFGD 0x1ec00004UL
-#define PCIX2_CFGD 0x2ec00004UL
-
-#define PCIX0_IO_BASE 0x0000000908000000ULL
-#define PCIX1_IO_BASE 0x0000000908000000ULL
-#define PCIX2_IO_BASE 0x0000000908000000ULL
-#define PCIX_IO_SIZE 0x00010000
-
-#ifdef CONFIG_440SP
-#define PCIX0_REG_BASE 0x000000090ec80000ULL
-#else
-#define PCIX0_REG_BASE 0x000000020ec80000ULL
-#endif
-#define PCIX_REG_OFFSET 0x10000000
-#define PCIX_REG_SIZE 0x200
-
-#define PCIX0_VENDID 0x000
-#define PCIX0_DEVID 0x002
-#define PCIX0_COMMAND 0x004
-#define PCIX0_STATUS 0x006
-#define PCIX0_REVID 0x008
-#define PCIX0_CLS 0x009
-#define PCIX0_CACHELS 0x00c
-#define PCIX0_LATTIM 0x00d
-#define PCIX0_HDTYPE 0x00e
-#define PCIX0_BIST 0x00f
-#define PCIX0_BAR0L 0x010
-#define PCIX0_BAR0H 0x014
-#define PCIX0_BAR1 0x018
-#define PCIX0_BAR2L 0x01c
-#define PCIX0_BAR2H 0x020
-#define PCIX0_BAR3 0x024
-#define PCIX0_CISPTR 0x028
-#define PCIX0_SBSYSVID 0x02c
-#define PCIX0_SBSYSID 0x02e
-#define PCIX0_EROMBA 0x030
-#define PCIX0_CAP 0x034
-#define PCIX0_RES0 0x035
-#define PCIX0_RES1 0x036
-#define PCIX0_RES2 0x038
-#define PCIX0_INTLN 0x03c
-#define PCIX0_INTPN 0x03d
-#define PCIX0_MINGNT 0x03e
-#define PCIX0_MAXLTNCY 0x03f
-#define PCIX0_BRDGOPT1 0x040
-#define PCIX0_BRDGOPT2 0x044
-#define PCIX0_ERREN 0x050
-#define PCIX0_ERRSTS 0x054
-#define PCIX0_PLBBESR 0x058
-#define PCIX0_PLBBEARL 0x05c
-#define PCIX0_PLBBEARH 0x060
-#define PCIX0_POM0LAL 0x068
-#define PCIX0_POM0LAH 0x06c
-#define PCIX0_POM0SA 0x070
-#define PCIX0_POM0PCIAL 0x074
-#define PCIX0_POM0PCIAH 0x078
-#define PCIX0_POM1LAL 0x07c
-#define PCIX0_POM1LAH 0x080
-#define PCIX0_POM1SA 0x084
-#define PCIX0_POM1PCIAL 0x088
-#define PCIX0_POM1PCIAH 0x08c
-#define PCIX0_POM2SA 0x090
-#define PCIX0_PIM0SAL 0x098
-#define PCIX0_PIM0SA PCIX0_PIM0SAL
-#define PCIX0_PIM0LAL 0x09c
-#define PCIX0_PIM0LAH 0x0a0
-#define PCIX0_PIM1SA 0x0a4
-#define PCIX0_PIM1LAL 0x0a8
-#define PCIX0_PIM1LAH 0x0ac
-#define PCIX0_PIM2SAL 0x0b0
-#define PCIX0_PIM2SA PCIX0_PIM2SAL
-#define PCIX0_PIM2LAL 0x0b4
-#define PCIX0_PIM2LAH 0x0b8
-#define PCIX0_OMCAPID 0x0c0
-#define PCIX0_OMNIPTR 0x0c1
-#define PCIX0_OMMC 0x0c2
-#define PCIX0_OMMA 0x0c4
-#define PCIX0_OMMUA 0x0c8
-#define PCIX0_OMMDATA 0x0cc
-#define PCIX0_OMMEOI 0x0ce
-#define PCIX0_PMCAPID 0x0d0
-#define PCIX0_PMNIPTR 0x0d1
-#define PCIX0_PMC 0x0d2
-#define PCIX0_PMCSR 0x0d4
-#define PCIX0_PMCSRBSE 0x0d6
-#define PCIX0_PMDATA 0x0d7
-#define PCIX0_PMSCRR 0x0d8
-#define PCIX0_CAPID 0x0dc
-#define PCIX0_NIPTR 0x0dd
-#define PCIX0_CMD 0x0de
-#define PCIX0_STS 0x0e0
-#define PCIX0_IDR 0x0e4
-#define PCIX0_CID 0x0e8
-#define PCIX0_RID 0x0ec
-#define PCIX0_PIM0SAH 0x0f8
-#define PCIX0_PIM2SAH 0x0fc
-#define PCIX0_MSGIL 0x100
-#define PCIX0_MSGIH 0x104
-#define PCIX0_MSGOL 0x108
-#define PCIX0_MSGOH 0x10c
-#define PCIX0_IM 0x1f8
-
-#define IIC_OWN 0x55
-#define IIC_CLOCK 50
-
-#undef NR_UICS
-#if defined(CONFIG_440GX)
-#define NR_UICS 3
-#elif defined(CONFIG_440SPE)
-#define NR_UICS 4
-#else
-#define NR_UICS 2
-#endif
-
-#include <asm/ibm4xx.h>
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_IBM44x_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
deleted file mode 100644
index ed6891af05d3..000000000000
--- a/include/asm-ppc/ibm4xx.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- * Module name: ibm4xx.h
- *
- * Description:
- * A generic include file which pulls in appropriate include files
- * for specific board types based on configuration settings.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM4XX_H__
-#define __ASM_IBM4XX_H__
-
-#include <asm/types.h>
-#include <asm/dcr.h>
-
-#ifdef CONFIG_40x
-
-#if defined(CONFIG_BUBINGA)
-#include <platforms/4xx/bubinga.h>
-#endif
-
-#if defined(CONFIG_CPCI405)
-#include <platforms/4xx/cpci405.h>
-#endif
-
-#if defined(CONFIG_EP405)
-#include <platforms/4xx/ep405.h>
-#endif
-
-#if defined(CONFIG_REDWOOD_5)
-#include <platforms/4xx/redwood5.h>
-#endif
-
-#if defined(CONFIG_REDWOOD_6)
-#include <platforms/4xx/redwood6.h>
-#endif
-
-#if defined(CONFIG_SYCAMORE)
-#include <platforms/4xx/sycamore.h>
-#endif
-
-#if defined(CONFIG_WALNUT)
-#include <platforms/4xx/walnut.h>
-#endif
-
-#if defined(CONFIG_XILINX_VIRTEX)
-#include <platforms/4xx/virtex.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_40x
-/*
- * The "residual" board information structure the boot loader passes
- * into the kernel.
- */
-extern bd_t __res;
-#endif
-
-void ppc4xx_setup_arch(void);
-void ppc4xx_map_io(void);
-void ppc4xx_init_IRQ(void);
-void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7);
-#endif
-
-#ifndef PPC4xx_MACHINE_NAME
-#define PPC4xx_MACHINE_NAME "Unidentified 4xx class"
-#endif
-
-
-/* IO_BASE is for PCI I/O.
- * ISA not supported, just here to resolve copilation.
- */
-
-#ifndef _IO_BASE
-#define _IO_BASE 0xe8000000 /* The PCI address window */
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#endif
-
-#elif defined(CONFIG_44x)
-
-#if defined(CONFIG_BAMBOO)
-#include <platforms/4xx/bamboo.h>
-#endif
-
-#if defined(CONFIG_EBONY)
-#include <platforms/4xx/ebony.h>
-#endif
-
-#if defined(CONFIG_LUAN)
-#include <platforms/4xx/luan.h>
-#endif
-
-#if defined(CONFIG_YUCCA)
-#include <platforms/4xx/yucca.h>
-#endif
-
-#if defined(CONFIG_OCOTEA)
-#include <platforms/4xx/ocotea.h>
-#endif
-
-#if defined(CONFIG_TAISHAN)
-#include <platforms/4xx/taishan.h>
-#endif
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_40x
-/*
- * The "residual" board information structure the boot loader passes
- * into the kernel.
- */
-extern bd_t __res;
-#endif
-#endif
-#endif /* CONFIG_40x */
-
-#endif /* __ASM_IBM4XX_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
deleted file mode 100644
index ddce616f765a..000000000000
--- a/include/asm-ppc/ibm_ocp.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * ibm_ocp.h
- *
- * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- * Mipsys - France
- *
- * Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- * Additional support and port to 2.6 LDM/sysfs by
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __IBM_OCP_H__
-#define __IBM_OCP_H__
-
-#include <asm/types.h>
-
-/*
- * IBM 4xx OCP system information
- */
-struct ocp_sys_info_data {
- int opb_bus_freq; /* OPB Bus Frequency (Hz) */
- int ebc_bus_freq; /* EBC Bus Frequency (Hz) */
-};
-
-extern struct ocp_sys_info_data ocp_sys_info;
-
-/*
- * EMAC additional data and sysfs support
- *
- * Note about mdio_idx: When you have a zmii, it's usually
- * not necessary, it covers the case of the 405EP which has
- * the MDIO lines on EMAC0 only
- *
- * Note about phy_map: Per EMAC map of PHY ids which should
- * be probed by emac_probe. Different EMACs can have
- * overlapping maps.
- *
- * Note, this map uses inverse logic for bits:
- * 0 - id should be probed
- * 1 - id should be ignored
- *
- * Default value of 0x00000000 - will result in usual
- * auto-detection logic.
- *
- */
-
-struct ocp_func_emac_data {
- int rgmii_idx; /* RGMII device index or -1 */
- int rgmii_mux; /* RGMII input of this EMAC */
- int zmii_idx; /* ZMII device index or -1 */
- int zmii_mux; /* ZMII input of this EMAC */
- int mal_idx; /* MAL device index */
- int mal_rx_chan; /* MAL rx channel number */
- int mal_tx_chan; /* MAL tx channel number */
- int wol_irq; /* WOL interrupt */
- int mdio_idx; /* EMAC idx of MDIO master or -1 */
- int tah_idx; /* TAH device index or -1 */
- int phy_mode; /* PHY type or configurable mode */
- u8 mac_addr[6]; /* EMAC mac address */
- u32 phy_map; /* EMAC phy map */
- u32 phy_feat_exc; /* Excluded PHY features */
-};
-
-/* Sysfs support */
-#define OCP_SYSFS_EMAC_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map) \
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_feat_exc)\
- \
-void ocp_show_emac_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_emac_rgmii_idx); \
- device_create_file(dev, &dev_attr_emac_rgmii_mux); \
- device_create_file(dev, &dev_attr_emac_zmii_idx); \
- device_create_file(dev, &dev_attr_emac_zmii_mux); \
- device_create_file(dev, &dev_attr_emac_mal_idx); \
- device_create_file(dev, &dev_attr_emac_mal_rx_chan); \
- device_create_file(dev, &dev_attr_emac_mal_tx_chan); \
- device_create_file(dev, &dev_attr_emac_wol_irq); \
- device_create_file(dev, &dev_attr_emac_mdio_idx); \
- device_create_file(dev, &dev_attr_emac_tah_idx); \
- device_create_file(dev, &dev_attr_emac_phy_mode); \
- device_create_file(dev, &dev_attr_emac_phy_map); \
- device_create_file(dev, &dev_attr_emac_phy_feat_exc); \
-}
-
-/*
- * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY)
- */
-#define PHY_MODE_NA 0
-#define PHY_MODE_MII 1
-#define PHY_MODE_RMII 2
-#define PHY_MODE_SMII 3
-#define PHY_MODE_RGMII 4
-#define PHY_MODE_TBI 5
-#define PHY_MODE_GMII 6
-#define PHY_MODE_RTBI 7
-#define PHY_MODE_SGMII 8
-
-#ifdef CONFIG_40x
-/*
- * Helper function to copy MAC addresses from the bd_t to OCP EMAC
- * additions.
- *
- * The range of EMAC indices (inclusive) to be copied are the arguments.
- */
-static inline void ibm_ocp_set_emac(int start, int end)
-{
- int i;
- struct ocp_def *def;
-
- /* Copy MAC addresses to EMAC additions */
- for (i=start; i<=end; i++) {
- def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
- if (i == 0)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enetaddr, 6);
-#if defined(CONFIG_405EP) || defined(CONFIG_44x)
- else if (i == 1)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet1addr, 6);
-#endif
-#if defined(CONFIG_440GX)
- else if (i == 2)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet2addr, 6);
- else if (i == 3)
- memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
- __res.bi_enet3addr, 6);
-#endif
- }
-}
-#endif
-
-/*
- * MAL additional data and sysfs support
- */
-struct ocp_func_mal_data {
- int num_tx_chans; /* Number of TX channels */
- int num_rx_chans; /* Number of RX channels */
- int txeob_irq; /* TX End Of Buffer IRQ */
- int rxeob_irq; /* RX End Of Buffer IRQ */
- int txde_irq; /* TX Descriptor Error IRQ */
- int rxde_irq; /* RX Descriptor Error IRQ */
- int serr_irq; /* MAL System Error IRQ */
- int dcr_base; /* MALx_CFG DCR number */
-};
-
-#define OCP_SYSFS_MAL_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base) \
- \
-void ocp_show_mal_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_mal_num_tx_chans); \
- device_create_file(dev, &dev_attr_mal_num_rx_chans); \
- device_create_file(dev, &dev_attr_mal_txeob_irq); \
- device_create_file(dev, &dev_attr_mal_rxeob_irq); \
- device_create_file(dev, &dev_attr_mal_txde_irq); \
- device_create_file(dev, &dev_attr_mal_rxde_irq); \
- device_create_file(dev, &dev_attr_mal_serr_irq); \
- device_create_file(dev, &dev_attr_mal_dcr_base); \
-}
-
-/*
- * IIC additional data and sysfs support
- */
-struct ocp_func_iic_data {
- int fast_mode; /* IIC fast mode enabled */
-};
-
-#define OCP_SYSFS_IIC_DATA() \
-OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode) \
- \
-void ocp_show_iic_data(struct device *dev) \
-{ \
- device_create_file(dev, &dev_attr_iic_fast_mode); \
-}
-#endif /* __IBM_OCP_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ibm_ocp_pci.h b/include/asm-ppc/ibm_ocp_pci.h
deleted file mode 100644
index a81ab6144358..000000000000
--- a/include/asm-ppc/ibm_ocp_pci.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM_OCP_PCI_H__
-#define __ASM_IBM_OCP_PCI_H__
-
-/* PCI 32 */
-
-struct pmm_regs {
- u32 la;
- u32 ma;
- u32 pcila;
- u32 pciha;
-};
-
-typedef struct pcil0_regs {
- struct pmm_regs pmm[3];
- u32 ptm1ms;
- u32 ptm1la;
- u32 ptm2ms;
- u32 ptm2la;
-} pci0_t;
-
-#endif /* __ASM_IBM_OCP_PCI_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/immap_cpm2.h b/include/asm-ppc/immap_cpm2.h
deleted file mode 100644
index 3c23d9cb47a6..000000000000
--- a/include/asm-ppc/immap_cpm2.h
+++ /dev/null
@@ -1,648 +0,0 @@
-/*
- * CPM2 Internal Memory Map
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- *
- * The Internal Memory Map for devices with CPM2 on them. This
- * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
- * 8560).
- */
-#ifdef __KERNEL__
-#ifndef __IMMAP_CPM2__
-#define __IMMAP_CPM2__
-
-/* System configuration registers.
-*/
-typedef struct sys_82xx_conf {
- u32 sc_siumcr;
- u32 sc_sypcr;
- u8 res1[6];
- u16 sc_swsr;
- u8 res2[20];
- u32 sc_bcr;
- u8 sc_ppc_acr;
- u8 res3[3];
- u32 sc_ppc_alrh;
- u32 sc_ppc_alrl;
- u8 sc_lcl_acr;
- u8 res4[3];
- u32 sc_lcl_alrh;
- u32 sc_lcl_alrl;
- u32 sc_tescr1;
- u32 sc_tescr2;
- u32 sc_ltescr1;
- u32 sc_ltescr2;
- u32 sc_pdtea;
- u8 sc_pdtem;
- u8 res5[3];
- u32 sc_ldtea;
- u8 sc_ldtem;
- u8 res6[163];
-} sysconf_82xx_cpm2_t;
-
-typedef struct sys_85xx_conf {
- u32 sc_cear;
- u16 sc_ceer;
- u16 sc_cemr;
- u8 res1[70];
- u32 sc_smaer;
- u8 res2[4];
- u32 sc_smevr;
- u32 sc_smctr;
- u32 sc_lmaer;
- u8 res3[4];
- u32 sc_lmevr;
- u32 sc_lmctr;
- u8 res4[144];
-} sysconf_85xx_cpm2_t;
-
-typedef union sys_conf {
- sysconf_82xx_cpm2_t siu_82xx;
- sysconf_85xx_cpm2_t siu_85xx;
-} sysconf_cpm2_t;
-
-
-
-/* Memory controller registers.
-*/
-typedef struct mem_ctlr {
- u32 memc_br0;
- u32 memc_or0;
- u32 memc_br1;
- u32 memc_or1;
- u32 memc_br2;
- u32 memc_or2;
- u32 memc_br3;
- u32 memc_or3;
- u32 memc_br4;
- u32 memc_or4;
- u32 memc_br5;
- u32 memc_or5;
- u32 memc_br6;
- u32 memc_or6;
- u32 memc_br7;
- u32 memc_or7;
- u32 memc_br8;
- u32 memc_or8;
- u32 memc_br9;
- u32 memc_or9;
- u32 memc_br10;
- u32 memc_or10;
- u32 memc_br11;
- u32 memc_or11;
- u8 res1[8];
- u32 memc_mar;
- u8 res2[4];
- u32 memc_mamr;
- u32 memc_mbmr;
- u32 memc_mcmr;
- u8 res3[8];
- u16 memc_mptpr;
- u8 res4[2];
- u32 memc_mdr;
- u8 res5[4];
- u32 memc_psdmr;
- u32 memc_lsdmr;
- u8 memc_purt;
- u8 res6[3];
- u8 memc_psrt;
- u8 res7[3];
- u8 memc_lurt;
- u8 res8[3];
- u8 memc_lsrt;
- u8 res9[3];
- u32 memc_immr;
- u32 memc_pcibr0;
- u32 memc_pcibr1;
- u8 res10[16];
- u32 memc_pcimsk0;
- u32 memc_pcimsk1;
- u8 res11[52];
-} memctl_cpm2_t;
-
-/* System Integration Timers.
-*/
-typedef struct sys_int_timers {
- u8 res1[32];
- u16 sit_tmcntsc;
- u8 res2[2];
- u32 sit_tmcnt;
- u8 res3[4];
- u32 sit_tmcntal;
- u8 res4[16];
- u16 sit_piscr;
- u8 res5[2];
- u32 sit_pitc;
- u32 sit_pitr;
- u8 res6[94];
- u8 res7[390];
-} sit_cpm2_t;
-
-#define PISCR_PIRQ_MASK ((u16)0xff00)
-#define PISCR_PS ((u16)0x0080)
-#define PISCR_PIE ((u16)0x0004)
-#define PISCR_PTF ((u16)0x0002)
-#define PISCR_PTE ((u16)0x0001)
-
-/* PCI Controller.
-*/
-typedef struct pci_ctlr {
- u32 pci_omisr;
- u32 pci_omimr;
- u8 res1[8];
- u32 pci_ifqpr;
- u32 pci_ofqpr;
- u8 res2[8];
- u32 pci_imr0;
- u32 pci_imr1;
- u32 pci_omr0;
- u32 pci_omr1;
- u32 pci_odr;
- u8 res3[4];
- u32 pci_idr;
- u8 res4[20];
- u32 pci_imisr;
- u32 pci_imimr;
- u8 res5[24];
- u32 pci_ifhpr;
- u8 res6[4];
- u32 pci_iftpr;
- u8 res7[4];
- u32 pci_iphpr;
- u8 res8[4];
- u32 pci_iptpr;
- u8 res9[4];
- u32 pci_ofhpr;
- u8 res10[4];
- u32 pci_oftpr;
- u8 res11[4];
- u32 pci_ophpr;
- u8 res12[4];
- u32 pci_optpr;
- u8 res13[8];
- u32 pci_mucr;
- u8 res14[8];
- u32 pci_qbar;
- u8 res15[12];
- u32 pci_dmamr0;
- u32 pci_dmasr0;
- u32 pci_dmacdar0;
- u8 res16[4];
- u32 pci_dmasar0;
- u8 res17[4];
- u32 pci_dmadar0;
- u8 res18[4];
- u32 pci_dmabcr0;
- u32 pci_dmandar0;
- u8 res19[86];
- u32 pci_dmamr1;
- u32 pci_dmasr1;
- u32 pci_dmacdar1;
- u8 res20[4];
- u32 pci_dmasar1;
- u8 res21[4];
- u32 pci_dmadar1;
- u8 res22[4];
- u32 pci_dmabcr1;
- u32 pci_dmandar1;
- u8 res23[88];
- u32 pci_dmamr2;
- u32 pci_dmasr2;
- u32 pci_dmacdar2;
- u8 res24[4];
- u32 pci_dmasar2;
- u8 res25[4];
- u32 pci_dmadar2;
- u8 res26[4];
- u32 pci_dmabcr2;
- u32 pci_dmandar2;
- u8 res27[88];
- u32 pci_dmamr3;
- u32 pci_dmasr3;
- u32 pci_dmacdar3;
- u8 res28[4];
- u32 pci_dmasar3;
- u8 res29[4];
- u32 pci_dmadar3;
- u8 res30[4];
- u32 pci_dmabcr3;
- u32 pci_dmandar3;
- u8 res31[344];
- u32 pci_potar0;
- u8 res32[4];
- u32 pci_pobar0;
- u8 res33[4];
- u32 pci_pocmr0;
- u8 res34[4];
- u32 pci_potar1;
- u8 res35[4];
- u32 pci_pobar1;
- u8 res36[4];
- u32 pci_pocmr1;
- u8 res37[4];
- u32 pci_potar2;
- u8 res38[4];
- u32 pci_pobar2;
- u8 res39[4];
- u32 pci_pocmr2;
- u8 res40[50];
- u32 pci_ptcr;
- u32 pci_gpcr;
- u32 pci_gcr;
- u32 pci_esr;
- u32 pci_emr;
- u32 pci_ecr;
- u32 pci_eacr;
- u8 res41[4];
- u32 pci_edcr;
- u8 res42[4];
- u32 pci_eccr;
- u8 res43[44];
- u32 pci_pitar1;
- u8 res44[4];
- u32 pci_pibar1;
- u8 res45[4];
- u32 pci_picmr1;
- u8 res46[4];
- u32 pci_pitar0;
- u8 res47[4];
- u32 pci_pibar0;
- u8 res48[4];
- u32 pci_picmr0;
- u8 res49[4];
- u32 pci_cfg_addr;
- u32 pci_cfg_data;
- u32 pci_int_ack;
- u8 res50[756];
-} pci_cpm2_t;
-
-/* Interrupt Controller.
-*/
-typedef struct interrupt_controller {
- u16 ic_sicr;
- u8 res1[2];
- u32 ic_sivec;
- u32 ic_sipnrh;
- u32 ic_sipnrl;
- u32 ic_siprr;
- u32 ic_scprrh;
- u32 ic_scprrl;
- u32 ic_simrh;
- u32 ic_simrl;
- u32 ic_siexr;
- u8 res2[88];
-} intctl_cpm2_t;
-
-/* Clocks and Reset.
-*/
-typedef struct clk_and_reset {
- u32 car_sccr;
- u8 res1[4];
- u32 car_scmr;
- u8 res2[4];
- u32 car_rsr;
- u32 car_rmr;
- u8 res[104];
-} car_cpm2_t;
-
-/* Input/Output Port control/status registers.
- * Names consistent with processor manual, although they are different
- * from the original 8xx names.......
- */
-typedef struct io_port {
- u32 iop_pdira;
- u32 iop_ppara;
- u32 iop_psora;
- u32 iop_podra;
- u32 iop_pdata;
- u8 res1[12];
- u32 iop_pdirb;
- u32 iop_pparb;
- u32 iop_psorb;
- u32 iop_podrb;
- u32 iop_pdatb;
- u8 res2[12];
- u32 iop_pdirc;
- u32 iop_pparc;
- u32 iop_psorc;
- u32 iop_podrc;
- u32 iop_pdatc;
- u8 res3[12];
- u32 iop_pdird;
- u32 iop_ppard;
- u32 iop_psord;
- u32 iop_podrd;
- u32 iop_pdatd;
- u8 res4[12];
-} iop_cpm2_t;
-
-/* Communication Processor Module Timers
-*/
-typedef struct cpm_timers {
- u8 cpmt_tgcr1;
- u8 res1[3];
- u8 cpmt_tgcr2;
- u8 res2[11];
- u16 cpmt_tmr1;
- u16 cpmt_tmr2;
- u16 cpmt_trr1;
- u16 cpmt_trr2;
- u16 cpmt_tcr1;
- u16 cpmt_tcr2;
- u16 cpmt_tcn1;
- u16 cpmt_tcn2;
- u16 cpmt_tmr3;
- u16 cpmt_tmr4;
- u16 cpmt_trr3;
- u16 cpmt_trr4;
- u16 cpmt_tcr3;
- u16 cpmt_tcr4;
- u16 cpmt_tcn3;
- u16 cpmt_tcn4;
- u16 cpmt_ter1;
- u16 cpmt_ter2;
- u16 cpmt_ter3;
- u16 cpmt_ter4;
- u8 res3[584];
-} cpmtimer_cpm2_t;
-
-/* DMA control/status registers.
-*/
-typedef struct sdma_csr {
- u8 res0[24];
- u8 sdma_sdsr;
- u8 res1[3];
- u8 sdma_sdmr;
- u8 res2[3];
- u8 sdma_idsr1;
- u8 res3[3];
- u8 sdma_idmr1;
- u8 res4[3];
- u8 sdma_idsr2;
- u8 res5[3];
- u8 sdma_idmr2;
- u8 res6[3];
- u8 sdma_idsr3;
- u8 res7[3];
- u8 sdma_idmr3;
- u8 res8[3];
- u8 sdma_idsr4;
- u8 res9[3];
- u8 sdma_idmr4;
- u8 res10[707];
-} sdma_cpm2_t;
-
-/* Fast controllers
-*/
-typedef struct fcc {
- u32 fcc_gfmr;
- u32 fcc_fpsmr;
- u16 fcc_ftodr;
- u8 res1[2];
- u16 fcc_fdsr;
- u8 res2[2];
- u16 fcc_fcce;
- u8 res3[2];
- u16 fcc_fccm;
- u8 res4[2];
- u8 fcc_fccs;
- u8 res5[3];
- u8 fcc_ftirr_phy[4];
-} fcc_t;
-
-/* Fast controllers continued
- */
-typedef struct fcc_c {
- u32 fcc_firper;
- u32 fcc_firer;
- u32 fcc_firsr_hi;
- u32 fcc_firsr_lo;
- u8 fcc_gfemr;
- u8 res1[15];
-} fcc_c_t;
-
-/* TC Layer
- */
-typedef struct tclayer {
- u16 tc_tcmode;
- u16 tc_cdsmr;
- u16 tc_tcer;
- u16 tc_rcc;
- u16 tc_tcmr;
- u16 tc_fcc;
- u16 tc_ccc;
- u16 tc_icc;
- u16 tc_tcc;
- u16 tc_ecc;
- u8 res1[12];
-} tclayer_t;
-
-
-/* I2C
-*/
-typedef struct i2c {
- u8 i2c_i2mod;
- u8 res1[3];
- u8 i2c_i2add;
- u8 res2[3];
- u8 i2c_i2brg;
- u8 res3[3];
- u8 i2c_i2com;
- u8 res4[3];
- u8 i2c_i2cer;
- u8 res5[3];
- u8 i2c_i2cmr;
- u8 res6[331];
-} i2c_cpm2_t;
-
-typedef struct scc { /* Serial communication channels */
- u32 scc_gsmrl;
- u32 scc_gsmrh;
- u16 scc_psmr;
- u8 res1[2];
- u16 scc_todr;
- u16 scc_dsr;
- u16 scc_scce;
- u8 res2[2];
- u16 scc_sccm;
- u8 res3;
- u8 scc_sccs;
- u8 res4[8];
-} scc_t;
-
-typedef struct smc { /* Serial management channels */
- u8 res1[2];
- u16 smc_smcmr;
- u8 res2[2];
- u8 smc_smce;
- u8 res3[3];
- u8 smc_smcm;
- u8 res4[5];
-} smc_t;
-
-/* Serial Peripheral Interface.
-*/
-typedef struct spi_ctrl {
- u16 spi_spmode;
- u8 res1[4];
- u8 spi_spie;
- u8 res2[3];
- u8 spi_spim;
- u8 res3[2];
- u8 spi_spcom;
- u8 res4[82];
-} spictl_cpm2_t;
-
-/* CPM Mux.
-*/
-typedef struct cpmux {
- u8 cmx_si1cr;
- u8 res1;
- u8 cmx_si2cr;
- u8 res2;
- u32 cmx_fcr;
- u32 cmx_scr;
- u8 cmx_smr;
- u8 res3;
- u16 cmx_uar;
- u8 res4[16];
-} cpmux_t;
-
-/* SIRAM control
-*/
-typedef struct siram {
- u16 si_amr;
- u16 si_bmr;
- u16 si_cmr;
- u16 si_dmr;
- u8 si_gmr;
- u8 res1;
- u8 si_cmdr;
- u8 res2;
- u8 si_str;
- u8 res3;
- u16 si_rsr;
-} siramctl_t;
-
-typedef struct mcc {
- u16 mcc_mcce;
- u8 res1[2];
- u16 mcc_mccm;
- u8 res2[2];
- u8 mcc_mccf;
- u8 res3[7];
-} mcc_t;
-
-typedef struct comm_proc {
- u32 cp_cpcr;
- u32 cp_rccr;
- u8 res1[14];
- u16 cp_rter;
- u8 res2[2];
- u16 cp_rtmr;
- u16 cp_rtscr;
- u8 res3[2];
- u32 cp_rtsr;
- u8 res4[12];
-} cpm_cpm2_t;
-
-/* USB Controller.
-*/
-typedef struct usb_ctlr {
- u8 usb_usmod;
- u8 usb_usadr;
- u8 usb_uscom;
- u8 res1[1];
- u16 usb_usep1;
- u16 usb_usep2;
- u16 usb_usep3;
- u16 usb_usep4;
- u8 res2[4];
- u16 usb_usber;
- u8 res3[2];
- u16 usb_usbmr;
- u8 usb_usbs;
- u8 res4[7];
-} usb_cpm2_t;
-
-/* ...and the whole thing wrapped up....
-*/
-
-typedef struct immap {
- /* Some references are into the unique and known dpram spaces,
- * others are from the generic base.
- */
-#define im_dprambase im_dpram1
- u8 im_dpram1[16*1024];
- u8 res1[16*1024];
- u8 im_dpram2[4*1024];
- u8 res2[8*1024];
- u8 im_dpram3[4*1024];
- u8 res3[16*1024];
-
- sysconf_cpm2_t im_siu_conf; /* SIU Configuration */
- memctl_cpm2_t im_memctl; /* Memory Controller */
- sit_cpm2_t im_sit; /* System Integration Timers */
- pci_cpm2_t im_pci; /* PCI Controller */
- intctl_cpm2_t im_intctl; /* Interrupt Controller */
- car_cpm2_t im_clkrst; /* Clocks and reset */
- iop_cpm2_t im_ioport; /* IO Port control/status */
- cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */
- sdma_cpm2_t im_sdma; /* SDMA control/status */
-
- fcc_t im_fcc[3]; /* Three FCCs */
- u8 res4z[32];
- fcc_c_t im_fcc_c[3]; /* Continued FCCs */
-
- u8 res4[32];
-
- tclayer_t im_tclayer[8]; /* Eight TCLayers */
- u16 tc_tcgsr;
- u16 tc_tcger;
-
- /* First set of baud rate generators.
- */
- u8 res[236];
- u32 im_brgc5;
- u32 im_brgc6;
- u32 im_brgc7;
- u32 im_brgc8;
-
- u8 res5[608];
-
- i2c_cpm2_t im_i2c; /* I2C control/status */
- cpm_cpm2_t im_cpm; /* Communication processor */
-
- /* Second set of baud rate generators.
- */
- u32 im_brgc1;
- u32 im_brgc2;
- u32 im_brgc3;
- u32 im_brgc4;
-
- scc_t im_scc[4]; /* Four SCCs */
- smc_t im_smc[2]; /* Couple of SMCs */
- spictl_cpm2_t im_spi; /* A SPI */
- cpmux_t im_cpmux; /* CPM clock route mux */
- siramctl_t im_siramctl1; /* First SI RAM Control */
- mcc_t im_mcc1; /* First MCC */
- siramctl_t im_siramctl2; /* Second SI RAM Control */
- mcc_t im_mcc2; /* Second MCC */
- usb_cpm2_t im_usb; /* USB Controller */
-
- u8 res6[1153];
-
- u16 im_si1txram[256];
- u8 res7[512];
- u16 im_si1rxram[256];
- u8 res8[512];
- u16 im_si2txram[256];
- u8 res9[512];
- u16 im_si2rxram[256];
- u8 res10[512];
- u8 res11[4096];
-} cpm2_map_t;
-
-extern cpm2_map_t *cpm2_immr;
-
-#endif /* __IMMAP_CPM2__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
deleted file mode 100644
index a0d409a5d80f..000000000000
--- a/include/asm-ppc/io.h
+++ /dev/null
@@ -1,502 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_IO_H
-#define _PPC_IO_H
-
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/page.h>
-#include <asm/byteorder.h>
-#include <asm/synch.h>
-#include <asm/mmu.h>
-
-#define SIO_CONFIG_RA 0x398
-#define SIO_CONFIG_RD 0x399
-
-#define SLOW_DOWN_IO
-
-#define PMAC_ISA_MEM_BASE 0
-#define PMAC_PCI_DRAM_OFFSET 0
-#define CHRP_ISA_IO_BASE 0xf8000000
-#define CHRP_ISA_MEM_BASE 0xf7000000
-#define CHRP_PCI_DRAM_OFFSET 0
-#define PREP_ISA_IO_BASE 0x80000000
-#define PREP_ISA_MEM_BASE 0xc0000000
-#define PREP_PCI_DRAM_OFFSET 0x80000000
-
-#if defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#elif !defined(CONFIG_PCI)
-#define _IO_BASE 0
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#else /* Everyone else */
-#define _IO_BASE isa_io_base
-#define _ISA_MEM_BASE isa_mem_base
-#define PCI_DRAM_OFFSET pci_dram_offset
-#endif /* Platform-dependent I/O */
-
-#define ___IO_BASE ((void __iomem *)_IO_BASE)
-extern unsigned long isa_io_base;
-extern unsigned long isa_mem_base;
-extern unsigned long pci_dram_offset;
-
-/*
- * 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
- *
- * Read operations have additional twi & isync to make sure the read
- * is actually performed (i.e. the data has come back) before we start
- * executing any following instructions.
- */
-extern inline int in_8(const volatile unsigned char __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__(
- "sync; lbz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_8(volatile unsigned char __iomem *addr, int val)
-{
- __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
-}
-
-extern inline int in_le16(const volatile unsigned short __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
-}
-
-extern inline int in_be16(const volatile unsigned short __iomem *addr)
-{
- int ret;
-
- __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
- "r" (val), "r" (addr));
-}
-
-extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
-}
-
-extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) :
- "r" (addr), "m" (*addr));
- return ret;
-}
-
-extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
- "twi 0,%0,0;\n"
- "isync" : "=r" (ret) : "m" (*addr));
- return ret;
-}
-
-extern inline void out_le32(volatile unsigned __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
- "r" (val), "r" (addr));
-}
-
-extern inline void out_be32(volatile unsigned __iomem *addr, int val)
-{
- __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
-}
-#if defined (CONFIG_8260_PCI9)
-#define readb(addr) in_8((volatile u8 *)(addr))
-#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
-#else
-static inline __u8 readb(const volatile void __iomem *addr)
-{
- return in_8(addr);
-}
-static inline void writeb(__u8 b, volatile void __iomem *addr)
-{
- out_8(addr, b);
-}
-#endif
-
-#if defined (CONFIG_8260_PCI9)
-/* Use macros if PCI9 workaround enabled */
-#define readw(addr) in_le16((volatile u16 *)(addr))
-#define readl(addr) in_le32((volatile u32 *)(addr))
-#define writew(b,addr) out_le16((volatile u16 *)(addr),(b))
-#define writel(b,addr) out_le32((volatile u32 *)(addr),(b))
-#else
-static inline __u16 readw(const volatile void __iomem *addr)
-{
- return in_le16(addr);
-}
-static inline __u32 readl(const volatile void __iomem *addr)
-{
- return in_le32(addr);
-}
-static inline void writew(__u16 b, volatile void __iomem *addr)
-{
- out_le16(addr, b);
-}
-static inline void writel(__u32 b, volatile void __iomem *addr)
-{
- out_le32(addr, b);
-}
-#endif /* CONFIG_8260_PCI9 */
-
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-static inline __u8 __raw_readb(const volatile void __iomem *addr)
-{
- return *(__force volatile __u8 *)(addr);
-}
-static inline __u16 __raw_readw(const volatile void __iomem *addr)
-{
- return *(__force volatile __u16 *)(addr);
-}
-static inline __u32 __raw_readl(const volatile void __iomem *addr)
-{
- return *(__force volatile __u32 *)(addr);
-}
-static inline void __raw_writeb(__u8 b, volatile void __iomem *addr)
-{
- *(__force volatile __u8 *)(addr) = b;
-}
-static inline void __raw_writew(__u16 b, volatile void __iomem *addr)
-{
- *(__force volatile __u16 *)(addr) = b;
-}
-static inline void __raw_writel(__u32 b, volatile void __iomem *addr)
-{
- *(__force volatile __u32 *)(addr) = b;
-}
-
-#define mmiowb()
-
-/*
- * The insw/outsw/insl/outsl macros don't do byte-swapping.
- * They are only used in practice for transferring buffers which
- * are arrays of bytes, and byte-swapping is not appropriate in
- * that case. - paulus
- */
-#define insb(port, buf, ns) _insb((port)+___IO_BASE, (buf), (ns))
-#define outsb(port, buf, ns) _outsb((port)+___IO_BASE, (buf), (ns))
-#define insw(port, buf, ns) _insw_ns((port)+___IO_BASE, (buf), (ns))
-#define outsw(port, buf, ns) _outsw_ns((port)+___IO_BASE, (buf), (ns))
-#define insl(port, buf, nl) _insl_ns((port)+___IO_BASE, (buf), (nl))
-#define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl))
-
-#define readsb(a, b, n) _insb((a), (b), (n))
-#define readsw(a, b, n) _insw_ns((a), (b), (n))
-#define readsl(a, b, n) _insl_ns((a), (b), (n))
-#define writesb(a, b, n) _outsb((a),(b),(n))
-#define writesw(a, b, n) _outsw_ns((a),(b),(n))
-#define writesl(a, b, n) _outsl_ns((a),(b),(n))
-
-
-/*
- * On powermacs and 8xx we will get a machine check exception
- * if we try to read data from a non-existent I/O port. Because
- * the machine check is an asynchronous exception, it isn't
- * well-defined which instruction SRR0 will point to when the
- * exception occurs.
- * With the sequence below (twi; isync; nop), we have found that
- * the machine check occurs on one of the three instructions on
- * all PPC implementations tested so far. The twi and isync are
- * needed on the 601 (in fact twi; sync works too), the isync and
- * nop are needed on 604[e|r], and any of twi, sync or isync will
- * work on 603[e], 750, 74xx.
- * The twi creates an explicit data dependency on the returned
- * value which seems to be needed to make the 601 wait for the
- * load to finish.
- */
-
-#define __do_in_asm(name, op) \
-extern __inline__ unsigned int name(unsigned int port) \
-{ \
- unsigned int x; \
- __asm__ __volatile__( \
- "sync\n" \
- "0:" op " %0,0,%1\n" \
- "1: twi 0,%0,0\n" \
- "2: isync\n" \
- "3: nop\n" \
- "4:\n" \
- ".section .fixup,\"ax\"\n" \
- "5: li %0,-1\n" \
- " b 4b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 0b,5b\n" \
- " .long 1b,5b\n" \
- " .long 2b,5b\n" \
- " .long 3b,5b\n" \
- ".previous" \
- : "=&r" (x) \
- : "r" (port + ___IO_BASE)); \
- return x; \
-}
-
-#define __do_out_asm(name, op) \
-extern __inline__ void name(unsigned int val, unsigned int port) \
-{ \
- __asm__ __volatile__( \
- "sync\n" \
- "0:" op " %0,0,%1\n" \
- "1: sync\n" \
- "2:\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 0b,2b\n" \
- " .long 1b,2b\n" \
- ".previous" \
- : : "r" (val), "r" (port + ___IO_BASE)); \
-}
-
-__do_out_asm(outb, "stbx")
-#if defined (CONFIG_8260_PCI9)
-/* in asm cannot be defined if PCI9 workaround is used */
-#define inb(port) in_8((port)+___IO_BASE)
-#define inw(port) in_le16((port)+___IO_BASE)
-#define inl(port) in_le32((port)+___IO_BASE)
-__do_out_asm(outw, "sthbrx")
-__do_out_asm(outl, "stwbrx")
-#else
-__do_in_asm(inb, "lbzx")
-__do_in_asm(inw, "lhbrx")
-__do_in_asm(inl, "lwbrx")
-__do_out_asm(outw, "sthbrx")
-__do_out_asm(outl, "stwbrx")
-
-#endif
-
-#define inb_p(port) inb((port))
-#define outb_p(val, port) outb((val), (port))
-#define inw_p(port) inw((port))
-#define outw_p(val, port) outw((val), (port))
-#define inl_p(port) inl((port))
-#define outl_p(val, port) outl((val), (port))
-
-extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
-extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
-extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
-extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
-extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
-extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
-
-
-#define IO_SPACE_LIMIT ~0
-
-#if defined (CONFIG_8260_PCI9)
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-#else
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
- memset((void __force *)addr, val, count);
-}
-static inline void memcpy_fromio(void *dst,const volatile void __iomem *src, int count)
-{
- memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
- memcpy((void __force *) dst, src, count);
-}
-#endif
-
-/*
- * Map in an area of physical address space, for accessing
- * I/O devices etc.
- */
-extern void __iomem *__ioremap(phys_addr_t address, unsigned long size,
- unsigned long flags);
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#ifdef CONFIG_44x
-extern void __iomem *ioremap64(unsigned long long address, unsigned long size);
-#endif
-#define ioremap_nocache(addr, size) ioremap((addr), (size))
-extern void iounmap(volatile void __iomem *addr);
-extern unsigned long iopa(unsigned long addr);
-extern void io_block_mapping(unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags);
-
-/*
- * The PCI bus is inherently Little-Endian. The PowerPC is being
- * run Big-Endian. Thus all values which cross the [PCI] barrier
- * must be endian-adjusted. Also, the local DRAM has a different
- * address from the PCI point of view, thus buffer addresses also
- * have to be modified [mapped] appropriately.
- */
-extern inline unsigned long virt_to_bus(volatile void * address)
-{
- if (address == (void *)0)
- return 0;
- return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET;
-}
-
-extern inline void * bus_to_virt(unsigned long address)
-{
- if (address == 0)
- return NULL;
- return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE);
-}
-
-/*
- * Change virtual addresses to physical addresses and vv, for
- * addresses in the area where the kernel has the RAM mapped.
- */
-extern inline unsigned long virt_to_phys(volatile void * address)
-{
- return (unsigned long) address - KERNELBASE;
-}
-
-extern inline void * phys_to_virt(unsigned long address)
-{
- return (void *) (address + KERNELBASE);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
-
-/* Enforce in-order execution of data I/O.
- * No distinction between read/write on PPC; use eieio for all three.
- */
-#define iobarrier_rw() eieio()
-#define iobarrier_r() eieio()
-#define iobarrier_w() eieio()
-
-/*
- * Here comes the ppc implementation of the IOMAP
- * interfaces.
- */
-static inline unsigned int ioread8(void __iomem *addr)
-{
- return readb(addr);
-}
-
-static inline unsigned int ioread16(void __iomem *addr)
-{
- return readw(addr);
-}
-
-static inline unsigned int ioread32(void __iomem *addr)
-{
- return readl(addr);
-}
-
-static inline void iowrite8(u8 val, void __iomem *addr)
-{
- writeb(val, addr);
-}
-
-static inline void iowrite16(u16 val, void __iomem *addr)
-{
- writew(val, addr);
-}
-
-static inline void iowrite32(u32 val, void __iomem *addr)
-{
- writel(val, addr);
-}
-
-static inline void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
-{
- _insb(addr, dst, count);
-}
-
-static inline void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
-{
- _insw_ns(addr, dst, count);
-}
-
-static inline void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
-{
- _insl_ns(addr, dst, count);
-}
-
-static inline void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- _outsb(addr, src, count);
-}
-
-static inline void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- _outsw_ns(addr, src, count);
-}
-
-static inline void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
-{
- _outsl_ns(addr, src, count);
-}
-
-/* Create a virtual mapping cookie for an IO port range */
-extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
-extern void ioport_unmap(void __iomem *);
-
-/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-
-#endif /* _PPC_IO_H */
-
-#ifdef CONFIG_8260_PCI9
-#include <asm/mpc8260_pci9.h>
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-/* access ports */
-#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
-#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
-
-#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
-#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
-
-#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v))
-#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/irq_regs.h b/include/asm-ppc/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-ppc/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-ppc/kdebug.h b/include/asm-ppc/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/include/asm-ppc/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-ppc/kgdb.h b/include/asm-ppc/kgdb.h
deleted file mode 100644
index b617dac82969..000000000000
--- a/include/asm-ppc/kgdb.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * kgdb.h: Defines and declarations for serial line source level
- * remote debugging of the Linux kernel using gdb.
- *
- * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifdef __KERNEL__
-#ifndef _PPC_KGDB_H
-#define _PPC_KGDB_H
-
-#ifndef __ASSEMBLY__
-
-/* Things specific to the gen550 backend. */
-struct uart_port;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_kgdb_map_scc(void);
-extern void gen550_init(int, struct uart_port *);
-
-/* Things specific to the pmac backend. */
-extern void zs_kgdb_hook(int tty_num);
-
-/* To init the kgdb engine. (called by serial hook)*/
-extern void set_debug_traps(void);
-
-/* To enter the debugger explicitly. */
-extern void breakpoint(void);
-
-/* For taking exceptions
- * these are defined in traps.c
- */
-extern int (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-/* What we bring to the party */
-int kgdb_bpt(struct pt_regs *regs);
-int kgdb_sstep(struct pt_regs *regs);
-void kgdb(struct pt_regs *regs);
-int kgdb_iabr_match(struct pt_regs *regs);
-int kgdb_dabr_match(struct pt_regs *regs);
-
-/*
- * external low-level support routines (ie macserial.c)
- */
-extern void kgdb_interruptible(int); /* control interrupts from serial */
-extern void putDebugChar(char); /* write a single character */
-extern char getDebugChar(void); /* read and return a single char */
-
-#endif /* !(__ASSEMBLY__) */
-#endif /* !(_PPC_KGDB_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h
deleted file mode 100644
index bf9e05dd54b5..000000000000
--- a/include/asm-ppc/m8260_pci.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * include/asm-ppc/m8260_pci.h
- *
- * Definitions for the MPC8250/MPC8265/MPC8266 integrated PCI host bridge.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __M8260_PCI_H
-#define __M8260_PCI_H
-
-#include <linux/pci_ids.h>
-
-/*
- * Define the vendor/device ID for the MPC8265.
- */
-#define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA)
-#define PCI_DEVICE_ID_MPC8272 ((0x18C1 << 16) | PCI_VENDOR_ID_MOTOROLA)
-
-#define M8265_PCIBR0 0x101ac
-#define M8265_PCIBR1 0x101b0
-#define M8265_PCIMSK0 0x101c4
-#define M8265_PCIMSK1 0x101c8
-
-/* Bit definitions for PCIBR registers */
-
-#define PCIBR_ENABLE 0x00000001
-
-/* Bit definitions for PCIMSK registers */
-
-#define PCIMSK_32KiB 0xFFFF8000 /* Size of window, smallest */
-#define PCIMSK_64KiB 0xFFFF0000
-#define PCIMSK_128KiB 0xFFFE0000
-#define PCIMSK_256KiB 0xFFFC0000
-#define PCIMSK_512KiB 0xFFF80000
-#define PCIMSK_1MiB 0xFFF00000
-#define PCIMSK_2MiB 0xFFE00000
-#define PCIMSK_4MiB 0xFFC00000
-#define PCIMSK_8MiB 0xFF800000
-#define PCIMSK_16MiB 0xFF000000
-#define PCIMSK_32MiB 0xFE000000
-#define PCIMSK_64MiB 0xFC000000
-#define PCIMSK_128MiB 0xF8000000
-#define PCIMSK_256MiB 0xF0000000
-#define PCIMSK_512MiB 0xE0000000
-#define PCIMSK_1GiB 0xC0000000 /* Size of window, largest */
-
-
-#define M826X_SCCR_PCI_MODE_EN 0x100
-
-
-/*
- * Outbound ATU registers (3 sets). These registers control how 60x bus (local)
- * addresses are translated to PCI addresses when the MPC826x is a PCI bus
- * master (initiator).
- */
-
-#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */
-#define POTAR_REG1 0x10818
-#define POTAR_REG2 0x10830
-
-#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */
-#define POBAR_REG1 0x10820
-#define POBAR_REG2 0x10838
-
-#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */
-#define POCMR_REG1 0x10828
-#define POCMR_REG2 0x10840
-
-/* Bit definitions for POMCR registers */
-
-#define POCMR_MASK_4KiB 0x000FFFFF
-#define POCMR_MASK_8KiB 0x000FFFFE
-#define POCMR_MASK_16KiB 0x000FFFFC
-#define POCMR_MASK_32KiB 0x000FFFF8
-#define POCMR_MASK_64KiB 0x000FFFF0
-#define POCMR_MASK_128KiB 0x000FFFE0
-#define POCMR_MASK_256KiB 0x000FFFC0
-#define POCMR_MASK_512KiB 0x000FFF80
-#define POCMR_MASK_1MiB 0x000FFF00
-#define POCMR_MASK_2MiB 0x000FFE00
-#define POCMR_MASK_4MiB 0x000FFC00
-#define POCMR_MASK_8MiB 0x000FF800
-#define POCMR_MASK_16MiB 0x000FF000
-#define POCMR_MASK_32MiB 0x000FE000
-#define POCMR_MASK_64MiB 0x000FC000
-#define POCMR_MASK_128MiB 0x000F8000
-#define POCMR_MASK_256MiB 0x000F0000
-#define POCMR_MASK_512MiB 0x000E0000
-#define POCMR_MASK_1GiB 0x000C0000
-
-#define POCMR_ENABLE 0x80000000
-#define POCMR_PCI_IO 0x40000000
-#define POCMR_PREFETCH_EN 0x20000000
-
-/* Soft PCI reset */
-
-#define PCI_GCR_REG 0x10880
-
-/* Bit definitions for PCI_GCR registers */
-
-#define PCIGCR_PCI_BUS_EN 0x1
-
-#define PCI_EMR_REG 0x10888
-/*
- * Inbound ATU registers (2 sets). These registers control how PCI addresses
- * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target.
- */
-
-#define PITAR_REG1 0x108D0
-#define PIBAR_REG1 0x108D8
-#define PICMR_REG1 0x108E0
-#define PITAR_REG0 0x108E8
-#define PIBAR_REG0 0x108F0
-#define PICMR_REG0 0x108F8
-
-/* Bit definitions for PCI Inbound Comparison Mask registers */
-
-#define PICMR_MASK_4KiB 0x000FFFFF
-#define PICMR_MASK_8KiB 0x000FFFFE
-#define PICMR_MASK_16KiB 0x000FFFFC
-#define PICMR_MASK_32KiB 0x000FFFF8
-#define PICMR_MASK_64KiB 0x000FFFF0
-#define PICMR_MASK_128KiB 0x000FFFE0
-#define PICMR_MASK_256KiB 0x000FFFC0
-#define PICMR_MASK_512KiB 0x000FFF80
-#define PICMR_MASK_1MiB 0x000FFF00
-#define PICMR_MASK_2MiB 0x000FFE00
-#define PICMR_MASK_4MiB 0x000FFC00
-#define PICMR_MASK_8MiB 0x000FF800
-#define PICMR_MASK_16MiB 0x000FF000
-#define PICMR_MASK_32MiB 0x000FE000
-#define PICMR_MASK_64MiB 0x000FC000
-#define PICMR_MASK_128MiB 0x000F8000
-#define PICMR_MASK_256MiB 0x000F0000
-#define PICMR_MASK_512MiB 0x000E0000
-#define PICMR_MASK_1GiB 0x000C0000
-
-#define PICMR_ENABLE 0x80000000
-#define PICMR_NO_SNOOP_EN 0x40000000
-#define PICMR_PREFETCH_EN 0x20000000
-
-/* PCI error Registers */
-
-#define PCI_ERROR_STATUS_REG 0x10884
-#define PCI_ERROR_MASK_REG 0x10888
-#define PCI_ERROR_CONTROL_REG 0x1088C
-#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890
-#define PCI_ERROR_DATA_CAPTURE_REG 0x10898
-#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0
-
-/* PCI error Register bit defines */
-
-#define PCI_ERROR_PCI_ADDR_PAR 0x00000001
-#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002
-#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004
-#define PCI_ERROR_PCI_NO_RSP 0x00000008
-#define PCI_ERROR_PCI_TAR_ABT 0x00000010
-#define PCI_ERROR_PCI_SERR 0x00000020
-#define PCI_ERROR_PCI_PERR_RD 0x00000040
-#define PCI_ERROR_PCI_PERR_WR 0x00000080
-#define PCI_ERROR_I2O_OFQO 0x00000100
-#define PCI_ERROR_I2O_IPQO 0x00000200
-#define PCI_ERROR_IRA 0x00000400
-#define PCI_ERROR_NMI 0x00000800
-#define PCI_ERROR_I2O_DBMC 0x00001000
-
-/*
- * Register pair used to generate configuration cycles on the PCI bus
- * and access the MPC826x's own PCI configuration registers.
- */
-
-#define PCI_CFG_ADDR_REG 0x10900
-#define PCI_CFG_DATA_REG 0x10904
-
-/* Bus parking decides where the bus control sits when idle */
-/* If modifying memory controllers for PCI park on the core */
-
-#define PPC_ACR_BUS_PARK_CORE 0x6
-#define PPC_ACR_BUS_PARK_PCI 0x3
-
-#endif /* __M8260_PCI_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h
deleted file mode 100644
index a20b499b0186..000000000000
--- a/include/asm-ppc/machdep.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_MACHDEP_H
-#define _PPC_MACHDEP_H
-
-#include <linux/init.h>
-#include <linux/kexec.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-struct pt_regs;
-struct pci_bus;
-struct pci_dev;
-struct seq_file;
-struct file;
-
-/*
- * This is for compatibility with ARCH=powerpc.
- */
-#define machine_is(x) __MACHINE_IS_##x
-#define __MACHINE_IS_powermac 0
-#define __MACHINE_IS_chrp 0
-#ifdef CONFIG_PPC_PREP
-#define __MACHINE_IS_prep 1
-#else
-#define __MACHINE_IS_prep 0
-#endif
-
-/* We export this macro for external modules like Alsa to know if
- * ppc_md.feature_call is implemented or not
- */
-#define CONFIG_PPC_HAS_FEATURE_CALLS
-
-struct machdep_calls {
- void (*setup_arch)(void);
- /* Optional, may be NULL. */
- int (*show_cpuinfo)(struct seq_file *m);
- int (*show_percpuinfo)(struct seq_file *m, int i);
- /* Optional, may be NULL. */
- unsigned int (*irq_canonicalize)(unsigned int irq);
- void (*init_IRQ)(void);
- int (*get_irq)(void);
-
- /* A general init function, called by ppc_init in init/main.c.
- May be NULL. DEPRECATED ! */
- void (*init)(void);
- /* For compatibility with merged platforms */
- void (*init_early)(void);
-
- void (*restart)(char *cmd);
- void (*power_off)(void);
- void (*halt)(void);
-
- void (*idle_loop)(void);
- void (*power_save)(void);
-
- long (*time_init)(void); /* Optional, may be NULL */
- int (*set_rtc_time)(unsigned long nowtime);
- unsigned long (*get_rtc_time)(void);
- unsigned char (*rtc_read_val)(int addr);
- void (*rtc_write_val)(int addr, unsigned char val);
- void (*calibrate_decr)(void);
-
- void (*heartbeat)(void);
- unsigned long heartbeat_reset;
- unsigned long heartbeat_count;
-
- unsigned long (*find_end_of_memory)(void);
- void (*setup_io_mappings)(void);
-
- void (*early_serial_map)(void);
- void (*progress)(char *, unsigned short);
- void (*kgdb_map_scc)(void);
-
- unsigned char (*nvram_read_val)(int addr);
- void (*nvram_write_val)(int addr, unsigned char val);
- void (*nvram_sync)(void);
-
- /*
- * optional PCI "hooks"
- */
-
- /* Called after scanning the bus, before allocating resources */
- void (*pcibios_fixup)(void);
-
- /* Called after PPC generic resource fixup to perform
- machine specific fixups */
- void (*pcibios_fixup_resources)(struct pci_dev *);
-
- /* Called for each PCI bus in the system when it's probed */
- void (*pcibios_fixup_bus)(struct pci_bus *);
-
- /* Called when pci_enable_device() is called (initial=0) or
- * when a device with no assigned resource is found (initial=1).
- * Returns 0 to allow assignment/enabling of the device. */
- int (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
-
- /* For interrupt routing */
- unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *);
- int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char);
-
- /* Called in indirect_* to avoid touching devices */
- int (*pci_exclude_device)(unsigned char, unsigned char);
-
- /* Called at then very end of pcibios_init() */
- void (*pcibios_after_init)(void);
-
- /* Get access protection for /dev/mem */
- pgprot_t (*phys_mem_access_prot)(struct file *file,
- unsigned long pfn,
- unsigned long size,
- pgprot_t vma_prot);
-
- /* Motherboard/chipset features. This is a kind of general purpose
- * hook used to control some machine specific features (like reset
- * lines, chip power control, etc...).
- */
- long (*feature_call)(unsigned int feature, ...);
-
-#ifdef CONFIG_SMP
- /* functions for dealing with other cpus */
- struct smp_ops_t *smp_ops;
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_KEXEC
- /* Called to shutdown machine specific hardware not already controlled
- * by other drivers.
- * XXX Should we move this one out of kexec scope?
- */
- void (*machine_shutdown)(void);
-
- /* Called to do the minimal shutdown needed to run a kexec'd kernel
- * to run successfully.
- * XXX Should we move this one out of kexec scope?
- */
- void (*machine_crash_shutdown)(void);
-
- /* Called to do what every setup is needed on image and the
- * reboot code buffer. Returns 0 on success.
- * Provide your own (maybe dummy) implementation if your platform
- * claims to support kexec.
- */
- int (*machine_kexec_prepare)(struct kimage *image);
-
- /* Called to handle any machine specific cleanup on image */
- void (*machine_kexec_cleanup)(struct kimage *image);
-
- /* Called to perform the _real_ kexec.
- * Do NOT allocate memory or fail here. We are past the point of
- * no return.
- */
- void (*machine_kexec)(struct kimage *image);
-#endif /* CONFIG_KEXEC */
-};
-
-extern struct machdep_calls ppc_md;
-extern char cmd_line[COMMAND_LINE_SIZE];
-
-extern void setup_pci_ptrs(void);
-
-#ifdef CONFIG_SMP
-struct smp_ops_t {
- void (*message_pass)(int target, int msg);
- int (*probe)(void);
- void (*kick_cpu)(int nr);
- void (*setup_cpu)(int nr);
- void (*space_timers)(int nr);
- void (*take_timebase)(void);
- void (*give_timebase)(void);
-};
-
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
-#endif /* _PPC_MACHDEP_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/md.h b/include/asm-ppc/md.h
deleted file mode 100644
index 9a9b6b42b4b4..000000000000
--- a/include/asm-ppc/md.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * md.h: High speed xor_block operation for RAID4/5
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MD_H
-#define __ASM_MD_H
-
-/* #define HAVE_ARCH_XORBLOCK */
-
-#define MD_XORBLOCK_ALIGNMENT sizeof(long)
-
-#endif /* __ASM_MD_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mk48t59.h b/include/asm-ppc/mk48t59.h
deleted file mode 100644
index 6a0ed6fc2d56..000000000000
--- a/include/asm-ppc/mk48t59.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Registers for the mk48t59 real-time-clock
- */
-
-#ifndef _PPC_MK48T59_H
-#define _PPC_MK48T59_H
-
-/* RTC Offsets */
-
-#define MK48T59_RTC_SECONDS 0x1FF9
-#define MK48T59_RTC_MINUTES 0x1FFA
-#define MK48T59_RTC_HOURS 0x1FFB
-#define MK48T59_RTC_DAY_OF_WEEK 0x1FFC
-#define MK48T59_RTC_DAY_OF_MONTH 0x1FFD
-#define MK48T59_RTC_MONTH 0x1FFE
-#define MK48T59_RTC_YEAR 0x1FFF
-
-#define MK48T59_RTC_CONTROLA 0x1FF8
-#define MK48T59_RTC_CA_WRITE 0x80
-#define MK48T59_RTC_CA_READ 0x40
-#define MK48T59_RTC_CA_CALIB_SIGN 0x20
-#define MK48T59_RTC_CA_CALIB_MASK 0x1f
-
-#define MK48T59_RTC_CONTROLB 0x1FF9
-#define MK48T59_RTC_CB_STOP 0x80
-
-#endif /* _PPC_MK48T59_H */
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
deleted file mode 100644
index d76ef098ed37..000000000000
--- a/include/asm-ppc/mmu.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * PowerPC memory management structures
- */
-
-#ifdef __KERNEL__
-#ifndef _PPC_MMU_H_
-#define _PPC_MMU_H_
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * Define physical address type. Machines using split size
- * virtual/physical addressing like 32-bit virtual / 36-bit
- * physical need a larger than native word size type. -Matt
- */
-#ifndef CONFIG_PHYS_64BIT
-#define PHYS_FMT "%.8lx"
-#else
-extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t);
-#define PHYS_FMT "%16Lx"
-#endif
-
-typedef struct {
- unsigned long id;
- unsigned long vdso_base;
-} mm_context_t;
-
-/* Hardware Page Table Entry */
-typedef struct _PTE {
- unsigned long v:1; /* Entry is valid */
- unsigned long vsid:24; /* Virtual segment identifier */
- unsigned long h:1; /* Hash algorithm indicator */
- unsigned long api:6; /* Abbreviated page index */
- unsigned long rpn:20; /* Real (physical) page number */
- unsigned long :3; /* Unused */
- unsigned long r:1; /* Referenced */
- unsigned long c:1; /* Changed */
- unsigned long w:1; /* Write-thru cache mode */
- unsigned long i:1; /* Cache inhibited */
- unsigned long m:1; /* Memory coherence */
- unsigned long g:1; /* Guarded */
- unsigned long :1; /* Unused */
- unsigned long pp:2; /* Page protection */
-} PTE;
-
-/* Values for PP (assumes Ks=0, Kp=1) */
-#define PP_RWXX 0 /* Supervisor read/write, User none */
-#define PP_RWRX 1 /* Supervisor read/write, User read */
-#define PP_RWRW 2 /* Supervisor read/write, User read/write */
-#define PP_RXRX 3 /* Supervisor read, User read */
-
-/* Segment Register */
-typedef struct _SEGREG {
- unsigned long t:1; /* Normal or I/O type */
- unsigned long ks:1; /* Supervisor 'key' (normally 0) */
- unsigned long kp:1; /* User 'key' (normally 1) */
- unsigned long n:1; /* No-execute */
- unsigned long :4; /* Unused */
- unsigned long vsid:24; /* Virtual Segment Identifier */
-} SEGREG;
-
-/* Block Address Translation (BAT) Registers */
-typedef struct _P601_BATU { /* Upper part of BAT for 601 processor */
- unsigned long bepi:15; /* Effective page index (virtual address) */
- unsigned long :8; /* unused */
- unsigned long w:1;
- unsigned long i:1; /* Cache inhibit */
- unsigned long m:1; /* Memory coherence */
- unsigned long ks:1; /* Supervisor key (normally 0) */
- unsigned long kp:1; /* User key (normally 1) */
- unsigned long pp:2; /* Page access protections */
-} P601_BATU;
-
-typedef struct _BATU { /* Upper part of BAT (all except 601) */
- unsigned long bepi:15; /* Effective page index (virtual address) */
- unsigned long :4; /* Unused */
- unsigned long bl:11; /* Block size mask */
- unsigned long vs:1; /* Supervisor valid */
- unsigned long vp:1; /* User valid */
-} BATU;
-
-typedef struct _P601_BATL { /* Lower part of BAT for 601 processor */
- unsigned long brpn:15; /* Real page index (physical address) */
- unsigned long :10; /* Unused */
- unsigned long v:1; /* Valid bit */
- unsigned long bl:6; /* Block size mask */
-} P601_BATL;
-
-typedef struct _BATL { /* Lower part of BAT (all except 601) */
- unsigned long brpn:15; /* Real page index (physical address) */
- unsigned long :10; /* Unused */
- unsigned long w:1; /* Write-thru cache */
- unsigned long i:1; /* Cache inhibit */
- unsigned long m:1; /* Memory coherence */
- unsigned long g:1; /* Guarded (MBZ in IBAT) */
- unsigned long :1; /* Unused */
- unsigned long pp:2; /* Page access protections */
-} BATL;
-
-typedef struct _BAT {
- BATU batu; /* Upper register */
- BATL batl; /* Lower register */
-} BAT;
-
-typedef struct _P601_BAT {
- P601_BATU batu; /* Upper register */
- P601_BATL batl; /* Lower register */
-} P601_BAT;
-
-#endif /* __ASSEMBLY__ */
-
-/* Block size masks */
-#define BL_128K 0x000
-#define BL_256K 0x001
-#define BL_512K 0x003
-#define BL_1M 0x007
-#define BL_2M 0x00F
-#define BL_4M 0x01F
-#define BL_8M 0x03F
-#define BL_16M 0x07F
-#define BL_32M 0x0FF
-#define BL_64M 0x1FF
-#define BL_128M 0x3FF
-#define BL_256M 0x7FF
-
-/* BAT Access Protection */
-#define BPP_XX 0x00 /* No access */
-#define BPP_RX 0x01 /* Read only */
-#define BPP_RW 0x02 /* Read/write */
-
-/* Control/status registers for the MPC8xx.
- * A write operation to these registers causes serialized access.
- * During software tablewalk, the registers used perform mask/shift-add
- * operations when written/read. A TLB entry is created when the Mx_RPN
- * is written, and the contents of several registers are used to
- * create the entry.
- */
-#define SPRN_MI_CTR 784 /* Instruction TLB control register */
-#define MI_GPM 0x80000000 /* Set domain manager mode */
-#define MI_PPM 0x40000000 /* Set subpage protection */
-#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
-#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */
-#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
-#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */
-#define MI_RESETVAL 0x00000000 /* Value of register at reset */
-
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MI_AP 786
-#define MI_Ks 0x80000000 /* Should not be set */
-#define MI_Kp 0x40000000 /* Should always be set */
-
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MI_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MI_EPN 787
-#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MI_EVALID 0x00000200 /* Entry is valid */
-#define MI_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the instruction TLB, it contains bits that get loaded into the
- * TLB entry when the MI_RPN is written.
- */
-#define SPRN_MI_TWC 789
-#define MI_APG 0x000001e0 /* Access protection group (0) */
-#define MI_GUARDED 0x00000010 /* Guarded storage */
-#define MI_PSMASK 0x0000000c /* Mask of page size bits */
-#define MI_PS8MEG 0x0000000c /* 8M page size */
-#define MI_PS512K 0x00000004 /* 512K page size */
-#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MI_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the instruction TLB, using
- * additional information from the MI_EPN, and MI_TWC registers.
- */
-#define SPRN_MI_RPN 790
-
-/* Define an RPN value for mapping kernel memory to large virtual
- * pages for boot initialization. This has real page number of 0,
- * large page size, shared page, cache enabled, and valid.
- * Also mark all subpages valid and write access.
- */
-#define MI_BOOTINIT 0x000001fd
-
-#define SPRN_MD_CTR 792 /* Data TLB control register */
-#define MD_GPM 0x80000000 /* Set domain manager mode */
-#define MD_PPM 0x40000000 /* Set subpage protection */
-#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */
-#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */
-#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */
-#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */
-#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */
-#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */
-#define MD_RESETVAL 0x04000000 /* Value of register at reset */
-
-#define SPRN_M_CASID 793 /* Address space ID (context) to match */
-#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */
-
-
-/* These are the Ks and Kp from the PowerPC books. For proper operation,
- * Ks = 0, Kp = 1.
- */
-#define SPRN_MD_AP 794
-#define MD_Ks 0x80000000 /* Should not be set */
-#define MD_Kp 0x40000000 /* Should always be set */
-
-/* The effective page number register. When read, contains the information
- * about the last instruction TLB miss. When MD_RPN is written, bits in
- * this register are used to create the TLB entry.
- */
-#define SPRN_MD_EPN 795
-#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */
-#define MD_EVALID 0x00000200 /* Entry is valid */
-#define MD_ASIDMASK 0x0000000f /* ASID match value */
- /* Reset value is undefined */
-
-/* The pointer to the base address of the first level page table.
- * During a software tablewalk, reading this register provides the address
- * of the entry associated with MD_EPN.
- */
-#define SPRN_M_TWB 796
-#define M_L1TB 0xfffff000 /* Level 1 table base address */
-#define M_L1INDX 0x00000ffc /* Level 1 index, when read */
- /* Reset value is undefined */
-
-/* A "level 1" or "segment" or whatever you want to call it register.
- * For the data TLB, it contains bits that get loaded into the TLB entry
- * when the MD_RPN is written. It is also provides the hardware assist
- * for finding the PTE address during software tablewalk.
- */
-#define SPRN_MD_TWC 797
-#define MD_L2TB 0xfffff000 /* Level 2 table base address */
-#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */
-#define MD_APG 0x000001e0 /* Access protection group (0) */
-#define MD_GUARDED 0x00000010 /* Guarded storage */
-#define MD_PSMASK 0x0000000c /* Mask of page size bits */
-#define MD_PS8MEG 0x0000000c /* 8M page size */
-#define MD_PS512K 0x00000004 /* 512K page size */
-#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */
-#define MD_WT 0x00000002 /* Use writethrough page attribute */
-#define MD_SVALID 0x00000001 /* Segment entry is valid */
- /* Reset value is undefined */
-
-
-/* Real page number. Defined by the pte. Writing this register
- * causes a TLB entry to be created for the data TLB, using
- * additional information from the MD_EPN, and MD_TWC registers.
- */
-#define SPRN_MD_RPN 798
-
-/* This is a temporary storage register that could be used to save
- * a processor working register during a tablewalk.
- */
-#define SPRN_M_TW 799
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully- associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively.
- */
-
-#define PPC4XX_TLB_SIZE 64
-
-/*
- * TLB entries are defined by a "high" tag portion and a "low" data
- * portion. On all architectures, the data portion is 32-bits.
- *
- * TLB entries are managed entirely under software control by reading,
- * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
- * instructions.
- */
-
-#define TLB_LO 1
-#define TLB_HI 0
-
-#define TLB_DATA TLB_LO
-#define TLB_TAG TLB_HI
-
-/* Tag portion */
-
-#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
-#define TLB_PAGESZ_MASK 0x00000380
-#define TLB_PAGESZ(x) (((x) & 0x7) << 7)
-#define PAGESZ_1K 0
-#define PAGESZ_4K 1
-#define PAGESZ_16K 2
-#define PAGESZ_64K 3
-#define PAGESZ_256K 4
-#define PAGESZ_1M 5
-#define PAGESZ_4M 6
-#define PAGESZ_16M 7
-#define TLB_VALID 0x00000040 /* Entry is valid */
-
-/* Data portion */
-
-#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
-#define TLB_PERM_MASK 0x00000300
-#define TLB_EX 0x00000200 /* Instruction execution allowed */
-#define TLB_WR 0x00000100 /* Writes permitted */
-#define TLB_ZSEL_MASK 0x000000F0
-#define TLB_ZSEL(x) (((x) & 0xF) << 4)
-#define TLB_ATTR_MASK 0x0000000F
-#define TLB_W 0x00000008 /* Caching is write-through */
-#define TLB_I 0x00000004 /* Caching is inhibited */
-#define TLB_M 0x00000002 /* Memory is coherent */
-#define TLB_G 0x00000001 /* Memory is guarded from prefetch */
-
-/*
- * PPC440 support
- */
-#define PPC44x_MMUCR_TID 0x000000ff
-#define PPC44x_MMUCR_STS 0x00010000
-
-#define PPC44x_TLB_PAGEID 0
-#define PPC44x_TLB_XLAT 1
-#define PPC44x_TLB_ATTRIB 2
-
-/* Page identification fields */
-#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */
-#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */
-#define PPC44x_TLB_TS 0x00000100 /* Translation address space */
-#define PPC44x_TLB_1K 0x00000000 /* Page sizes */
-#define PPC44x_TLB_4K 0x00000010
-#define PPC44x_TLB_16K 0x00000020
-#define PPC44x_TLB_64K 0x00000030
-#define PPC44x_TLB_256K 0x00000040
-#define PPC44x_TLB_1M 0x00000050
-#define PPC44x_TLB_16M 0x00000070
-#define PPC44x_TLB_256M 0x00000090
-
-/* Translation fields */
-#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */
-#define PPC44x_TLB_ERPN_MASK 0x0000000f
-
-/* Storage attribute and access control fields */
-#define PPC44x_TLB_ATTR_MASK 0x0000ff80
-#define PPC44x_TLB_U0 0x00008000 /* User 0 */
-#define PPC44x_TLB_U1 0x00004000 /* User 1 */
-#define PPC44x_TLB_U2 0x00002000 /* User 2 */
-#define PPC44x_TLB_U3 0x00001000 /* User 3 */
-#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */
-#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */
-#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */
-#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */
-#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */
-
-#define PPC44x_TLB_PERM_MASK 0x0000003f
-#define PPC44x_TLB_UX 0x00000020 /* User execution */
-#define PPC44x_TLB_UW 0x00000010 /* User write */
-#define PPC44x_TLB_UR 0x00000008 /* User read */
-#define PPC44x_TLB_SX 0x00000004 /* Super execution */
-#define PPC44x_TLB_SW 0x00000002 /* Super write */
-#define PPC44x_TLB_SR 0x00000001 /* Super read */
-
-/* Book-E defined page sizes */
-#define BOOKE_PAGESZ_1K 0
-#define BOOKE_PAGESZ_4K 1
-#define BOOKE_PAGESZ_16K 2
-#define BOOKE_PAGESZ_64K 3
-#define BOOKE_PAGESZ_256K 4
-#define BOOKE_PAGESZ_1M 5
-#define BOOKE_PAGESZ_4M 6
-#define BOOKE_PAGESZ_16M 7
-#define BOOKE_PAGESZ_64M 8
-#define BOOKE_PAGESZ_256M 9
-#define BOOKE_PAGESZ_1GB 10
-#define BOOKE_PAGESZ_4GB 11
-#define BOOKE_PAGESZ_16GB 12
-#define BOOKE_PAGESZ_64GB 13
-#define BOOKE_PAGESZ_256GB 14
-#define BOOKE_PAGESZ_1TB 15
-
-#ifndef CONFIG_SERIAL_TEXT_DEBUG
-#define PPC44x_EARLY_TLBS 1
-#else
-#define PPC44x_EARLY_TLBS 2
-#endif
-
-/*
- * Freescale Book-E MMU support
- */
-
-#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
-#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x) ((x) & 0x00000FFF)
-
-#define MAS1_VALID 0x80000000
-#define MAS1_IPROT 0x40000000
-#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
-#define MAS1_TS 0x00001000
-#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00)
-
-#define MAS2_EPN 0xFFFFF000
-#define MAS2_X0 0x00000040
-#define MAS2_X1 0x00000020
-#define MAS2_W 0x00000010
-#define MAS2_I 0x00000008
-#define MAS2_M 0x00000004
-#define MAS2_G 0x00000002
-#define MAS2_E 0x00000001
-
-#define MAS3_RPN 0xFFFFF000
-#define MAS3_U0 0x00000200
-#define MAS3_U1 0x00000100
-#define MAS3_U2 0x00000080
-#define MAS3_U3 0x00000040
-#define MAS3_UX 0x00000020
-#define MAS3_SX 0x00000010
-#define MAS3_UW 0x00000008
-#define MAS3_SW 0x00000004
-#define MAS3_UR 0x00000002
-#define MAS3_SR 0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_TIDDSEL 0x000F0000
-#define MAS4_TSIZED(x) MAS1_TSIZE(x)
-#define MAS4_X0D 0x00000040
-#define MAS4_X1D 0x00000020
-#define MAS4_WD 0x00000010
-#define MAS4_ID 0x00000008
-#define MAS4_MD 0x00000004
-#define MAS4_GD 0x00000002
-#define MAS4_ED 0x00000001
-
-#define MAS6_SPID0 0x3FFF0000
-#define MAS6_SPID1 0x00007FFE
-#define MAS6_SAS 0x00000001
-#define MAS6_SPID MAS6_SPID0
-
-#define MAS7_RPN 0xFFFFFFFF
-
-#endif /* _PPC_MMU_H_ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mmu_context.h b/include/asm-ppc/mmu_context.h
deleted file mode 100644
index 9f097e25b169..000000000000
--- a/include/asm-ppc/mmu_context.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifdef __KERNEL__
-#ifndef __PPC_MMU_CONTEXT_H
-#define __PPC_MMU_CONTEXT_H
-
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/mmu.h>
-#include <asm/cputable.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
- * (virtual segment identifiers) for each context. Although the
- * hardware supports 24-bit VSIDs, and thus >1 million contexts,
- * we only use 32,768 of them. That is ample, since there can be
- * at most around 30,000 tasks in the system anyway, and it means
- * that we can use a bitmap to indicate which contexts are in use.
- * Using a bitmap means that we entirely avoid all of the problems
- * that we used to have when the context number overflowed,
- * particularly on SMP systems.
- * -- paulus.
- */
-
-/*
- * This function defines the mapping from contexts to VSIDs (virtual
- * segment IDs). We use a skew on both the context and the high 4 bits
- * of the 32-bit virtual address (the "effective segment ID") in order
- * to spread out the entries in the MMU hash table. Note, if this
- * function is changed then arch/ppc/mm/hashtable.S will have to be
- * changed to correspond.
- */
-#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
- & 0xffffff)
-
-/*
- The MPC8xx has only 16 contexts. We rotate through them on each
- task switch. A better way would be to keep track of tasks that
- own contexts, and implement an LRU usage. That way very active
- tasks don't always have to pay the TLB reload overhead. The
- kernel pages are mapped shared, so the kernel can run on behalf
- of any task that makes a kernel entry. Shared does not mean they
- are not protected, just that the ASID comparison is not performed.
- -- Dan
-
- The IBM4xx has 256 contexts, so we can just rotate through these
- as a way of "switching" contexts. If the TID of the TLB is zero,
- the PID/TID comparison is disabled, so we can use a TID of zero
- to represent all kernel pages as shared among all contexts.
- -- Dan
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_8xx
-#define NO_CONTEXT 16
-#define LAST_CONTEXT 15
-#define FIRST_CONTEXT 0
-
-#elif defined(CONFIG_4xx)
-#define NO_CONTEXT 256
-#define LAST_CONTEXT 255
-#define FIRST_CONTEXT 1
-
-#else
-
-/* PPC 6xx, 7xx CPUs */
-#define NO_CONTEXT ((unsigned long) -1)
-#define LAST_CONTEXT 32767
-#define FIRST_CONTEXT 1
-#endif
-
-/*
- * Set the current MMU context.
- * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
- * loading up the segment registers for the user part of the address space.
- *
- * Since the PGD is immediately available, it is much faster to simply
- * pass this along as a second parameter, which is required for 8xx and
- * can be used for debugging on all processors (if you happen to have
- * an Abatron).
- */
-extern void set_context(unsigned long contextid, pgd_t *pgd);
-
-/*
- * Bitmap of contexts in use.
- * The size of this bitmap is LAST_CONTEXT + 1 bits.
- */
-extern unsigned long context_map[];
-
-/*
- * This caches the next context number that we expect to be free.
- * Its use is an optimization only, we can't rely on this context
- * number to be free, but it usually will be.
- */
-extern unsigned long next_mmu_context;
-
-/*
- * If we don't have sufficient contexts to give one to every task
- * that could be in the system, we need to be able to steal contexts.
- * These variables support that.
- */
-#if LAST_CONTEXT < 30000
-#define FEW_CONTEXTS 1
-extern atomic_t nr_free_contexts;
-extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern void steal_context(void);
-#endif
-
-/*
- * Get a new mmu context for the address space described by `mm'.
- */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
- unsigned long ctx;
-
- if (mm->context.id != NO_CONTEXT)
- return;
-#ifdef FEW_CONTEXTS
- while (atomic_dec_if_positive(&nr_free_contexts) < 0)
- steal_context();
-#endif
- ctx = next_mmu_context;
- while (test_and_set_bit(ctx, context_map)) {
- ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
- if (ctx > LAST_CONTEXT)
- ctx = 0;
- }
- next_mmu_context = (ctx + 1) & LAST_CONTEXT;
- mm->context.id = ctx;
-#ifdef FEW_CONTEXTS
- context_mm[ctx] = mm;
-#endif
-}
-
-/*
- * Set up the context for a new address space.
- */
-static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
-{
- mm->context.id = NO_CONTEXT;
- mm->context.vdso_base = 0;
- return 0;
-}
-
-/*
- * We're finished using the context for an address space.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
- preempt_disable();
- if (mm->context.id != NO_CONTEXT) {
- clear_bit(mm->context.id, context_map);
- mm->context.id = NO_CONTEXT;
-#ifdef FEW_CONTEXTS
- atomic_inc(&nr_free_contexts);
-#endif
- }
- preempt_enable();
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
-{
-#ifdef CONFIG_ALTIVEC
- if (cpu_has_feature(CPU_FTR_ALTIVEC))
- asm volatile ("dssall;\n"
-#ifndef CONFIG_POWER4
- "sync;\n" /* G4 needs a sync here, G5 apparently not */
-#endif
- : : );
-#endif /* CONFIG_ALTIVEC */
-
- tsk->thread.pgdir = next->pgd;
-
- /* No need to flush userspace segments if the mm doesnt change */
- if (prev == next)
- return;
-
- /* Setup new userspace context */
- get_mmu_context(next);
- set_context(next->context.id, next->pgd);
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current)
-
-extern void mmu_context_init(void);
-
-#endif /* __PPC_MMU_CONTEXT_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h
deleted file mode 100644
index b30a6a3b5bd2..000000000000
--- a/include/asm-ppc/mpc10x.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
- * ctlr/EPIC/etc.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PPC_KERNEL_MPC10X_H
-#define __PPC_KERNEL_MPC10X_H
-
-#include <linux/pci_ids.h>
-#include <asm/pci-bridge.h>
-
-/*
- * The values here don't completely map everything but should work in most
- * cases.
- *
- * MAP A (PReP Map)
- * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
- * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
- * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000
- * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- *
- * MAP B (CHRP Map)
- * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
- * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
- * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000
- * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- */
-
-/*
- * Define the vendor/device IDs for the various bridges--should be added to
- * <linux/pci_ids.h>
- */
-#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \
- PCI_VENDOR_ID_MOTOROLA)
-#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
-#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
-#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
-
-/* Define the type of map to use */
-#define MPC10X_MEM_MAP_A 1
-#define MPC10X_MEM_MAP_B 2
-
-/* Map A (PReP Map) Defines */
-#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8
-#define MPC10X_MAPA_CNFG_DATA 0x80000cfc
-
-#define MPC10X_MAPA_ISA_IO_BASE 0x80000000
-#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000
-#define MPC10X_MAPA_DRAM_OFFSET 0x80000000
-
-#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0
-#define MPC10X_MAPA_PCI_IO_START 0x00000000
-#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1)
-#define MPC10X_MAPA_PCI_MEM_START 0x00000000
-#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1)
-
-#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \
- MPC10X_MAPA_PCI_MEM_START)
-
-/* Map B (CHRP Map) Defines */
-#define MPC10X_MAPB_CNFG_ADDR 0xfec00000
-#define MPC10X_MAPB_CNFG_DATA 0xfee00000
-
-#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000
-#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000
-#define MPC10X_MAPB_DRAM_OFFSET 0x00000000
-
-#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000
-#define MPC10X_MAPB_PCI_IO_START 0x00000000
-#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1)
-#define MPC10X_MAPB_PCI_MEM_START 0x80000000
-#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1)
-
-#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \
- MPC10X_MAPB_PCI_MEM_START)
-
-/* Set hose members to values appropriate for the mem map used */
-#define MPC10X_SETUP_HOSE(hose, map) { \
- (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \
- (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \
- (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \
- (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \
- (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \
- (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \
-}
-
-
-/* Miscellaneous Configuration register offsets */
-#define MPC10X_CFG_PIR_REG 0x09
-#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00
-#define MPC10X_CFG_PIR_AGENT 0x01
-
-#define MPC10X_CFG_EUMBBAR 0x78
-
-#define MPC10X_CFG_PICR1_REG 0xa8
-#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000
-#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000
-#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000
-#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004
-#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040
-
-#define MPC10X_CFG_PICR2_REG 0xac
-#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001
-
-#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0
-#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */
-#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */
-#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */
-#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */
-#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */
-
-/* Define offsets for the memory controller registers in the config space */
-#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0
-
-/* Define some offset in the EUMB */
-#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */
-
-#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */
-#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */
-#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */
-#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */
-#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */
-#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */
-#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */
-#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */
-#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */
-#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */
-#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */
-#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */
-#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */
-#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */
-#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */
-#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */
-
-/*
- * Define some recommended places to put the EUMB regs.
- * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
- */
-extern unsigned long ioremap_base;
-#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE)
-#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE
-
-enum ppc_sys_devices {
- MPC10X_IIC1,
- MPC10X_DMA0,
- MPC10X_DMA1,
- MPC10X_UART0,
- MPC10X_UART1,
- NUM_PPC_SYS_DEVS,
-};
-
-int mpc10x_bridge_init(struct pci_controller *hose,
- uint current_map,
- uint new_map,
- uint phys_eumb_base);
-unsigned long mpc10x_get_mem_size(uint mem_map);
-int mpc10x_enable_store_gathering(struct pci_controller *hose);
-int mpc10x_disable_store_gathering(struct pci_controller *hose);
-
-/* For MPC107 boards that use the built-in openpic */
-void mpc10x_set_openpic(void);
-
-#endif /* __PPC_KERNEL_MPC10X_H */
diff --git a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h
deleted file mode 100644
index d9d21aa68ba3..000000000000
--- a/include/asm-ppc/mpc52xx.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * include/asm-ppc/mpc52xx.h
- *
- * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
- * May need to be cleaned as the port goes on ...
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Originally written by Dale Farnsworth <dfarnsworth@mvista.com>
- * for the 2.4 kernel.
- *
- * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_MPC52xx_H__
-#define __ASM_MPC52xx_H__
-
-#ifndef __ASSEMBLY__
-#include <asm/ppcboot.h>
-#include <asm/types.h>
-
-struct pt_regs;
-#endif /* __ASSEMBLY__ */
-
-
-/* ======================================================================== */
-/* PPC Sys devices definition */
-/* ======================================================================== */
-
-enum ppc_sys_devices {
- MPC52xx_MSCAN1,
- MPC52xx_MSCAN2,
- MPC52xx_SPI,
- MPC52xx_USB,
- MPC52xx_BDLC,
- MPC52xx_PSC1,
- MPC52xx_PSC2,
- MPC52xx_PSC3,
- MPC52xx_PSC4,
- MPC52xx_PSC5,
- MPC52xx_PSC6,
- MPC52xx_FEC,
- MPC52xx_ATA,
- MPC52xx_I2C1,
- MPC52xx_I2C2,
- NUM_PPC_SYS_DEVS,
-};
-
-
-/* ======================================================================== */
-/* Main registers/struct addresses */
-/* ======================================================================== */
-
-/* MBAR position */
-#define MPC52xx_MBAR 0xf0000000 /* Phys address */
-#define MPC52xx_MBAR_VIRT 0xf0000000 /* Virt address */
-#define MPC52xx_MBAR_SIZE 0x00010000
-
-#define MPC52xx_PA(x) ((phys_addr_t)(MPC52xx_MBAR + (x)))
-#define MPC52xx_VA(x) ((void __iomem *)(MPC52xx_MBAR_VIRT + (x)))
-
-/* Registers zone offset/size */
-#define MPC52xx_MMAP_CTL_OFFSET 0x0000
-#define MPC52xx_MMAP_CTL_SIZE 0x068
-#define MPC52xx_SDRAM_OFFSET 0x0100
-#define MPC52xx_SDRAM_SIZE 0x010
-#define MPC52xx_CDM_OFFSET 0x0200
-#define MPC52xx_CDM_SIZE 0x038
-#define MPC52xx_INTR_OFFSET 0x0500
-#define MPC52xx_INTR_SIZE 0x04c
-#define MPC52xx_GPTx_OFFSET(x) (0x0600 + ((x)<<4))
-#define MPC52xx_GPT_SIZE 0x010
-#define MPC52xx_RTC_OFFSET 0x0800
-#define MPC52xx_RTC_SIZE 0x024
-#define MPC52xx_GPIO_OFFSET 0x0b00
-#define MPC52xx_GPIO_SIZE 0x040
-#define MPC52xx_GPIO_WKUP_OFFSET 0x0c00
-#define MPC52xx_GPIO_WKUP_SIZE 0x028
-#define MPC52xx_PCI_OFFSET 0x0d00
-#define MPC52xx_PCI_SIZE 0x100
-#define MPC52xx_SDMA_OFFSET 0x1200
-#define MPC52xx_SDMA_SIZE 0x100
-#define MPC52xx_XLB_OFFSET 0x1f00
-#define MPC52xx_XLB_SIZE 0x100
-#define MPC52xx_PSCx_OFFSET(x) (((x)!=6)?(0x1e00+((x)<<9)):0x2c00)
-#define MPC52xx_PSC_SIZE 0x0a0
-
-/* SRAM used for SDMA */
-#define MPC52xx_SRAM_OFFSET 0x8000
-#define MPC52xx_SRAM_SIZE 0x4000
-
-
-/* ======================================================================== */
-/* IRQ mapping */
-/* ======================================================================== */
-/* Be sure to look at mpc52xx_pic.h if you wish for whatever reason to change
- * this
- */
-
-#define MPC52xx_CRIT_IRQ_NUM 4
-#define MPC52xx_MAIN_IRQ_NUM 17
-#define MPC52xx_SDMA_IRQ_NUM 17
-#define MPC52xx_PERP_IRQ_NUM 23
-
-#define MPC52xx_CRIT_IRQ_BASE 1
-#define MPC52xx_MAIN_IRQ_BASE (MPC52xx_CRIT_IRQ_BASE + MPC52xx_CRIT_IRQ_NUM)
-#define MPC52xx_SDMA_IRQ_BASE (MPC52xx_MAIN_IRQ_BASE + MPC52xx_MAIN_IRQ_NUM)
-#define MPC52xx_PERP_IRQ_BASE (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)
-
-#define MPC52xx_IRQ0 (MPC52xx_CRIT_IRQ_BASE + 0)
-#define MPC52xx_SLICE_TIMER_0_IRQ (MPC52xx_CRIT_IRQ_BASE + 1)
-#define MPC52xx_HI_INT_IRQ (MPC52xx_CRIT_IRQ_BASE + 2)
-#define MPC52xx_CCS_IRQ (MPC52xx_CRIT_IRQ_BASE + 3)
-
-#define MPC52xx_IRQ1 (MPC52xx_MAIN_IRQ_BASE + 1)
-#define MPC52xx_IRQ2 (MPC52xx_MAIN_IRQ_BASE + 2)
-#define MPC52xx_IRQ3 (MPC52xx_MAIN_IRQ_BASE + 3)
-
-#define MPC52xx_SDMA_IRQ (MPC52xx_PERP_IRQ_BASE + 0)
-#define MPC52xx_PSC1_IRQ (MPC52xx_PERP_IRQ_BASE + 1)
-#define MPC52xx_PSC2_IRQ (MPC52xx_PERP_IRQ_BASE + 2)
-#define MPC52xx_PSC3_IRQ (MPC52xx_PERP_IRQ_BASE + 3)
-#define MPC52xx_PSC6_IRQ (MPC52xx_PERP_IRQ_BASE + 4)
-#define MPC52xx_IRDA_IRQ (MPC52xx_PERP_IRQ_BASE + 4)
-#define MPC52xx_FEC_IRQ (MPC52xx_PERP_IRQ_BASE + 5)
-#define MPC52xx_USB_IRQ (MPC52xx_PERP_IRQ_BASE + 6)
-#define MPC52xx_ATA_IRQ (MPC52xx_PERP_IRQ_BASE + 7)
-#define MPC52xx_PCI_CNTRL_IRQ (MPC52xx_PERP_IRQ_BASE + 8)
-#define MPC52xx_PCI_SCIRX_IRQ (MPC52xx_PERP_IRQ_BASE + 9)
-#define MPC52xx_PCI_SCITX_IRQ (MPC52xx_PERP_IRQ_BASE + 10)
-#define MPC52xx_PSC4_IRQ (MPC52xx_PERP_IRQ_BASE + 11)
-#define MPC52xx_PSC5_IRQ (MPC52xx_PERP_IRQ_BASE + 12)
-#define MPC52xx_SPI_MODF_IRQ (MPC52xx_PERP_IRQ_BASE + 13)
-#define MPC52xx_SPI_SPIF_IRQ (MPC52xx_PERP_IRQ_BASE + 14)
-#define MPC52xx_I2C1_IRQ (MPC52xx_PERP_IRQ_BASE + 15)
-#define MPC52xx_I2C2_IRQ (MPC52xx_PERP_IRQ_BASE + 16)
-#define MPC52xx_MSCAN1_IRQ (MPC52xx_PERP_IRQ_BASE + 17)
-#define MPC52xx_MSCAN2_IRQ (MPC52xx_PERP_IRQ_BASE + 18)
-#define MPC52xx_IR_RX_IRQ (MPC52xx_PERP_IRQ_BASE + 19)
-#define MPC52xx_IR_TX_IRQ (MPC52xx_PERP_IRQ_BASE + 20)
-#define MPC52xx_XLB_ARB_IRQ (MPC52xx_PERP_IRQ_BASE + 21)
-#define MPC52xx_BDLC_IRQ (MPC52xx_PERP_IRQ_BASE + 22)
-
-
-
-/* ======================================================================== */
-/* Structures mapping of some unit register set */
-/* ======================================================================== */
-
-#ifndef __ASSEMBLY__
-
-/* Memory Mapping Control */
-struct mpc52xx_mmap_ctl {
- u32 mbar; /* MMAP_CTRL + 0x00 */
-
- u32 cs0_start; /* MMAP_CTRL + 0x04 */
- u32 cs0_stop; /* MMAP_CTRL + 0x08 */
- u32 cs1_start; /* MMAP_CTRL + 0x0c */
- u32 cs1_stop; /* MMAP_CTRL + 0x10 */
- u32 cs2_start; /* MMAP_CTRL + 0x14 */
- u32 cs2_stop; /* MMAP_CTRL + 0x18 */
- u32 cs3_start; /* MMAP_CTRL + 0x1c */
- u32 cs3_stop; /* MMAP_CTRL + 0x20 */
- u32 cs4_start; /* MMAP_CTRL + 0x24 */
- u32 cs4_stop; /* MMAP_CTRL + 0x28 */
- u32 cs5_start; /* MMAP_CTRL + 0x2c */
- u32 cs5_stop; /* MMAP_CTRL + 0x30 */
-
- u32 sdram0; /* MMAP_CTRL + 0x34 */
- u32 sdram1; /* MMAP_CTRL + 0X38 */
-
- u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */
-
- u32 boot_start; /* MMAP_CTRL + 0x4c */
- u32 boot_stop; /* MMAP_CTRL + 0x50 */
-
- u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */
-
- u32 cs6_start; /* MMAP_CTRL + 0x58 */
- u32 cs6_stop; /* MMAP_CTRL + 0x5c */
- u32 cs7_start; /* MMAP_CTRL + 0x60 */
- u32 cs7_stop; /* MMAP_CTRL + 0x64 */
-};
-
-/* SDRAM control */
-struct mpc52xx_sdram {
- u32 mode; /* SDRAM + 0x00 */
- u32 ctrl; /* SDRAM + 0x04 */
- u32 config1; /* SDRAM + 0x08 */
- u32 config2; /* SDRAM + 0x0c */
-};
-
-/* Interrupt controller */
-struct mpc52xx_intr {
- u32 per_mask; /* INTR + 0x00 */
- u32 per_pri1; /* INTR + 0x04 */
- u32 per_pri2; /* INTR + 0x08 */
- u32 per_pri3; /* INTR + 0x0c */
- u32 ctrl; /* INTR + 0x10 */
- u32 main_mask; /* INTR + 0x14 */
- u32 main_pri1; /* INTR + 0x18 */
- u32 main_pri2; /* INTR + 0x1c */
- u32 reserved1; /* INTR + 0x20 */
- u32 enc_status; /* INTR + 0x24 */
- u32 crit_status; /* INTR + 0x28 */
- u32 main_status; /* INTR + 0x2c */
- u32 per_status; /* INTR + 0x30 */
- u32 reserved2; /* INTR + 0x34 */
- u32 per_error; /* INTR + 0x38 */
-};
-
-/* SDMA */
-struct mpc52xx_sdma {
- u32 taskBar; /* SDMA + 0x00 */
- u32 currentPointer; /* SDMA + 0x04 */
- u32 endPointer; /* SDMA + 0x08 */
- u32 variablePointer;/* SDMA + 0x0c */
-
- u8 IntVect1; /* SDMA + 0x10 */
- u8 IntVect2; /* SDMA + 0x11 */
- u16 PtdCntrl; /* SDMA + 0x12 */
-
- u32 IntPend; /* SDMA + 0x14 */
- u32 IntMask; /* SDMA + 0x18 */
-
- u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */
-
- u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */
-
- u32 cReqSelect; /* SDMA + 0x5c */
- u32 task_size0; /* SDMA + 0x60 */
- u32 task_size1; /* SDMA + 0x64 */
- u32 MDEDebug; /* SDMA + 0x68 */
- u32 ADSDebug; /* SDMA + 0x6c */
- u32 Value1; /* SDMA + 0x70 */
- u32 Value2; /* SDMA + 0x74 */
- u32 Control; /* SDMA + 0x78 */
- u32 Status; /* SDMA + 0x7c */
- u32 PTDDebug; /* SDMA + 0x80 */
-};
-
-/* GPT */
-struct mpc52xx_gpt {
- u32 mode; /* GPTx + 0x00 */
- u32 count; /* GPTx + 0x04 */
- u32 pwm; /* GPTx + 0x08 */
- u32 status; /* GPTx + 0X0c */
-};
-
-/* RTC */
-struct mpc52xx_rtc {
- u32 time_set; /* RTC + 0x00 */
- u32 date_set; /* RTC + 0x04 */
- u32 stopwatch; /* RTC + 0x08 */
- u32 int_enable; /* RTC + 0x0c */
- u32 time; /* RTC + 0x10 */
- u32 date; /* RTC + 0x14 */
- u32 stopwatch_intr; /* RTC + 0x18 */
- u32 bus_error; /* RTC + 0x1c */
- u32 dividers; /* RTC + 0x20 */
-};
-
-/* GPIO */
-struct mpc52xx_gpio {
- u32 port_config; /* GPIO + 0x00 */
- u32 simple_gpioe; /* GPIO + 0x04 */
- u32 simple_ode; /* GPIO + 0x08 */
- u32 simple_ddr; /* GPIO + 0x0c */
- u32 simple_dvo; /* GPIO + 0x10 */
- u32 simple_ival; /* GPIO + 0x14 */
- u8 outo_gpioe; /* GPIO + 0x18 */
- u8 reserved1[3]; /* GPIO + 0x19 */
- u8 outo_dvo; /* GPIO + 0x1c */
- u8 reserved2[3]; /* GPIO + 0x1d */
- u8 sint_gpioe; /* GPIO + 0x20 */
- u8 reserved3[3]; /* GPIO + 0x21 */
- u8 sint_ode; /* GPIO + 0x24 */
- u8 reserved4[3]; /* GPIO + 0x25 */
- u8 sint_ddr; /* GPIO + 0x28 */
- u8 reserved5[3]; /* GPIO + 0x29 */
- u8 sint_dvo; /* GPIO + 0x2c */
- u8 reserved6[3]; /* GPIO + 0x2d */
- u8 sint_inten; /* GPIO + 0x30 */
- u8 reserved7[3]; /* GPIO + 0x31 */
- u16 sint_itype; /* GPIO + 0x34 */
- u16 reserved8; /* GPIO + 0x36 */
- u8 gpio_control; /* GPIO + 0x38 */
- u8 reserved9[3]; /* GPIO + 0x39 */
- u8 sint_istat; /* GPIO + 0x3c */
- u8 sint_ival; /* GPIO + 0x3d */
- u8 bus_errs; /* GPIO + 0x3e */
- u8 reserved10; /* GPIO + 0x3f */
-};
-
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4
-#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5
-#define MPC52xx_GPIO_PCI_DIS (1<<15)
-
-/* GPIO with WakeUp*/
-struct mpc52xx_gpio_wkup {
- u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */
- u8 reserved1[3]; /* GPIO_WKUP + 0x03 */
- u8 wkup_ode; /* GPIO_WKUP + 0x04 */
- u8 reserved2[3]; /* GPIO_WKUP + 0x05 */
- u8 wkup_ddr; /* GPIO_WKUP + 0x08 */
- u8 reserved3[3]; /* GPIO_WKUP + 0x09 */
- u8 wkup_dvo; /* GPIO_WKUP + 0x0C */
- u8 reserved4[3]; /* GPIO_WKUP + 0x0D */
- u8 wkup_inten; /* GPIO_WKUP + 0x10 */
- u8 reserved5[3]; /* GPIO_WKUP + 0x11 */
- u8 wkup_iinten; /* GPIO_WKUP + 0x14 */
- u8 reserved6[3]; /* GPIO_WKUP + 0x15 */
- u16 wkup_itype; /* GPIO_WKUP + 0x18 */
- u8 reserved7[2]; /* GPIO_WKUP + 0x1A */
- u8 wkup_maste; /* GPIO_WKUP + 0x1C */
- u8 reserved8[3]; /* GPIO_WKUP + 0x1D */
- u8 wkup_ival; /* GPIO_WKUP + 0x20 */
- u8 reserved9[3]; /* GPIO_WKUP + 0x21 */
- u8 wkup_istat; /* GPIO_WKUP + 0x24 */
- u8 reserved10[3]; /* GPIO_WKUP + 0x25 */
-};
-
-/* XLB Bus control */
-struct mpc52xx_xlb {
- u8 reserved[0x40];
- u32 config; /* XLB + 0x40 */
- u32 version; /* XLB + 0x44 */
- u32 status; /* XLB + 0x48 */
- u32 int_enable; /* XLB + 0x4c */
- u32 addr_capture; /* XLB + 0x50 */
- u32 bus_sig_capture; /* XLB + 0x54 */
- u32 addr_timeout; /* XLB + 0x58 */
- u32 data_timeout; /* XLB + 0x5c */
- u32 bus_act_timeout; /* XLB + 0x60 */
- u32 master_pri_enable; /* XLB + 0x64 */
- u32 master_priority; /* XLB + 0x68 */
- u32 base_address; /* XLB + 0x6c */
- u32 snoop_window; /* XLB + 0x70 */
-};
-
-#define MPC52xx_XLB_CFG_PLDIS (1 << 31)
-#define MPC52xx_XLB_CFG_SNOOP (1 << 15)
-
-/* Clock Distribution control */
-struct mpc52xx_cdm {
- u32 jtag_id; /* CDM + 0x00 reg0 read only */
- u32 rstcfg; /* CDM + 0x04 reg1 read only */
- u32 breadcrumb; /* CDM + 0x08 reg2 */
-
- u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */
- u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */
- u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */
- u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */
-
- u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */
- u8 fd_enable; /* CDM + 0x11 reg4 byte1 */
- u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */
-
- u32 clk_enables; /* CDM + 0x14 reg5 */
-
- u8 osc_disable; /* CDM + 0x18 reg6 byte0 */
- u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */
-
- u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */
- u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */
- u8 reserved1; /* CDM + 0x1e reg7 byte2 */
- u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */
-
- u8 soft_reset; /* CDM + 0x20 u8 byte0 */
- u8 no_ckstp; /* CDM + 0x21 u8 byte0 */
- u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */
-
- u8 pll_lock; /* CDM + 0x24 reg9 byte0 */
- u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */
- u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */
- u8 reserved3; /* CDM + 0x27 reg9 byte3 */
-
- u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */
- u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */
-
- u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */
- u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */
-
- u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */
- u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */
-
- u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */
- u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */
-};
-
-#endif /* __ASSEMBLY__ */
-
-
-/* ========================================================================= */
-/* Prototypes for MPC52xx syslib */
-/* ========================================================================= */
-
-#ifndef __ASSEMBLY__
-
-extern void mpc52xx_init_irq(void);
-extern int mpc52xx_get_irq(void);
-
-extern unsigned long mpc52xx_find_end_of_memory(void);
-extern void mpc52xx_set_bat(void);
-extern void mpc52xx_map_io(void);
-extern void mpc52xx_restart(char *cmd);
-extern void mpc52xx_halt(void);
-extern void mpc52xx_power_off(void);
-extern void mpc52xx_progress(char *s, unsigned short hex);
-extern void mpc52xx_calibrate_decr(void);
-
-extern void mpc52xx_find_bridges(void);
-
-extern void mpc52xx_setup_cpu(void);
-
-
-
- /* Matching of PSC function */
-struct mpc52xx_psc_func {
- int id;
- char *func;
-};
-
-extern int mpc52xx_match_psc_function(int psc_idx, const char *func);
-extern struct mpc52xx_psc_func mpc52xx_psc_functions[];
- /* This array is to be defined in platform file */
-
-#endif /* __ASSEMBLY__ */
-
-
-/* ========================================================================= */
-/* Platform configuration */
-/* ========================================================================= */
-
-/* The U-Boot platform information struct */
-extern bd_t __res;
-
-/* Platform options */
-#if defined(CONFIG_LITE5200)
-#include <platforms/lite5200.h>
-#endif
-
-
-#endif /* __ASM_MPC52xx_H__ */
diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h
deleted file mode 100644
index 39fcd02cd4e8..000000000000
--- a/include/asm-ppc/mpc52xx_psc.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * include/asm-ppc/mpc52xx_psc.h
- *
- * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
- * PSCs. Theses are shared between multiple drivers since a PSC can be
- * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based/Extracted from some header of the 2.4 originally written by
- * Dale Farnsworth <dfarnsworth@mvista.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_MPC52xx_PSC_H__
-#define __ASM_MPC52xx_PSC_H__
-
-#include <asm/types.h>
-
-/* Max number of PSCs */
-#define MPC52xx_PSC_MAXNUM 6
-
-/* Programmable Serial Controller (PSC) status register bits */
-#define MPC52xx_PSC_SR_UNEX_RX 0x0001
-#define MPC52xx_PSC_SR_DATA_VAL 0x0002
-#define MPC52xx_PSC_SR_DATA_OVR 0x0004
-#define MPC52xx_PSC_SR_CMDSEND 0x0008
-#define MPC52xx_PSC_SR_CDE 0x0080
-#define MPC52xx_PSC_SR_RXRDY 0x0100
-#define MPC52xx_PSC_SR_RXFULL 0x0200
-#define MPC52xx_PSC_SR_TXRDY 0x0400
-#define MPC52xx_PSC_SR_TXEMP 0x0800
-#define MPC52xx_PSC_SR_OE 0x1000
-#define MPC52xx_PSC_SR_PE 0x2000
-#define MPC52xx_PSC_SR_FE 0x4000
-#define MPC52xx_PSC_SR_RB 0x8000
-
-/* PSC Command values */
-#define MPC52xx_PSC_RX_ENABLE 0x0001
-#define MPC52xx_PSC_RX_DISABLE 0x0002
-#define MPC52xx_PSC_TX_ENABLE 0x0004
-#define MPC52xx_PSC_TX_DISABLE 0x0008
-#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010
-#define MPC52xx_PSC_RST_RX 0x0020
-#define MPC52xx_PSC_RST_TX 0x0030
-#define MPC52xx_PSC_RST_ERR_STAT 0x0040
-#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050
-#define MPC52xx_PSC_START_BRK 0x0060
-#define MPC52xx_PSC_STOP_BRK 0x0070
-
-/* PSC TxRx FIFO status bits */
-#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040
-#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020
-#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010
-#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008
-#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004
-#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002
-#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001
-
-/* PSC interrupt mask bits */
-#define MPC52xx_PSC_IMR_TXRDY 0x0100
-#define MPC52xx_PSC_IMR_RXRDY 0x0200
-#define MPC52xx_PSC_IMR_DB 0x0400
-#define MPC52xx_PSC_IMR_IPC 0x8000
-
-/* PSC input port change bit */
-#define MPC52xx_PSC_CTS 0x01
-#define MPC52xx_PSC_DCD 0x02
-#define MPC52xx_PSC_D_CTS 0x10
-#define MPC52xx_PSC_D_DCD 0x20
-
-/* PSC mode fields */
-#define MPC52xx_PSC_MODE_5_BITS 0x00
-#define MPC52xx_PSC_MODE_6_BITS 0x01
-#define MPC52xx_PSC_MODE_7_BITS 0x02
-#define MPC52xx_PSC_MODE_8_BITS 0x03
-#define MPC52xx_PSC_MODE_BITS_MASK 0x03
-#define MPC52xx_PSC_MODE_PAREVEN 0x00
-#define MPC52xx_PSC_MODE_PARODD 0x04
-#define MPC52xx_PSC_MODE_PARFORCE 0x08
-#define MPC52xx_PSC_MODE_PARNONE 0x10
-#define MPC52xx_PSC_MODE_ERR 0x20
-#define MPC52xx_PSC_MODE_FFULL 0x40
-#define MPC52xx_PSC_MODE_RXRTS 0x80
-
-#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00
-#define MPC52xx_PSC_MODE_ONE_STOP 0x07
-#define MPC52xx_PSC_MODE_TWO_STOP 0x0f
-
-#define MPC52xx_PSC_RFNUM_MASK 0x01ff
-
-
-/* Structure of the hardware registers */
-struct mpc52xx_psc {
- u8 mode; /* PSC + 0x00 */
- u8 reserved0[3];
- union { /* PSC + 0x04 */
- u16 status;
- u16 clock_select;
- } sr_csr;
-#define mpc52xx_psc_status sr_csr.status
-#define mpc52xx_psc_clock_select sr_csr.clock_select
- u16 reserved1;
- u8 command; /* PSC + 0x08 */
- u8 reserved2[3];
- union { /* PSC + 0x0c */
- u8 buffer_8;
- u16 buffer_16;
- u32 buffer_32;
- } buffer;
-#define mpc52xx_psc_buffer_8 buffer.buffer_8
-#define mpc52xx_psc_buffer_16 buffer.buffer_16
-#define mpc52xx_psc_buffer_32 buffer.buffer_32
- union { /* PSC + 0x10 */
- u8 ipcr;
- u8 acr;
- } ipcr_acr;
-#define mpc52xx_psc_ipcr ipcr_acr.ipcr
-#define mpc52xx_psc_acr ipcr_acr.acr
- u8 reserved3[3];
- union { /* PSC + 0x14 */
- u16 isr;
- u16 imr;
- } isr_imr;
-#define mpc52xx_psc_isr isr_imr.isr
-#define mpc52xx_psc_imr isr_imr.imr
- u16 reserved4;
- u8 ctur; /* PSC + 0x18 */
- u8 reserved5[3];
- u8 ctlr; /* PSC + 0x1c */
- u8 reserved6[3];
- u32 ccr; /* PSC + 0x20 */
- u32 ac97_slots; /* PSC + 0x24 */
- u32 ac97_cmd; /* PSC + 0x28 */
- u32 ac97_data; /* PSC + 0x2c */
- u8 ivr; /* PSC + 0x30 */
- u8 reserved8[3];
- u8 ip; /* PSC + 0x34 */
- u8 reserved9[3];
- u8 op1; /* PSC + 0x38 */
- u8 reserved10[3];
- u8 op0; /* PSC + 0x3c */
- u8 reserved11[3];
- u32 sicr; /* PSC + 0x40 */
- u8 ircr1; /* PSC + 0x44 */
- u8 reserved13[3];
- u8 ircr2; /* PSC + 0x44 */
- u8 reserved14[3];
- u8 irsdr; /* PSC + 0x4c */
- u8 reserved15[3];
- u8 irmdr; /* PSC + 0x50 */
- u8 reserved16[3];
- u8 irfdr; /* PSC + 0x54 */
- u8 reserved17[3];
-};
-
-struct mpc52xx_psc_fifo {
- u16 rfnum; /* PSC + 0x58 */
- u16 reserved18;
- u16 tfnum; /* PSC + 0x5c */
- u16 reserved19;
- u32 rfdata; /* PSC + 0x60 */
- u16 rfstat; /* PSC + 0x64 */
- u16 reserved20;
- u8 rfcntl; /* PSC + 0x68 */
- u8 reserved21[5];
- u16 rfalarm; /* PSC + 0x6e */
- u16 reserved22;
- u16 rfrptr; /* PSC + 0x72 */
- u16 reserved23;
- u16 rfwptr; /* PSC + 0x76 */
- u16 reserved24;
- u16 rflrfptr; /* PSC + 0x7a */
- u16 reserved25;
- u16 rflwfptr; /* PSC + 0x7e */
- u32 tfdata; /* PSC + 0x80 */
- u16 tfstat; /* PSC + 0x84 */
- u16 reserved26;
- u8 tfcntl; /* PSC + 0x88 */
- u8 reserved27[5];
- u16 tfalarm; /* PSC + 0x8e */
- u16 reserved28;
- u16 tfrptr; /* PSC + 0x92 */
- u16 reserved29;
- u16 tfwptr; /* PSC + 0x96 */
- u16 reserved30;
- u16 tflrfptr; /* PSC + 0x9a */
- u16 reserved31;
- u16 tflwfptr; /* PSC + 0x9e */
-};
-
-
-#endif /* __ASM_MPC52xx_PSC_H__ */
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
deleted file mode 100644
index 402ba15c2e80..000000000000
--- a/include/asm-ppc/mpc8260.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each. Rather than change every
- * file that has to include MPC8260 configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_MPC8260_H__
-#define __ASM_PPC_MPC8260_H__
-
-
-#ifdef CONFIG_8260
-
-#ifdef CONFIG_EST8260
-#include <platforms/est8260.h>
-#endif
-
-#ifdef CONFIG_SBC82xx
-#include <platforms/sbc82xx.h>
-#endif
-
-#ifdef CONFIG_SBS8260
-#include <platforms/sbs8260.h>
-#endif
-
-#ifdef CONFIG_RPX8260
-#include <platforms/rpx8260.h>
-#endif
-
-#ifdef CONFIG_WILLOW
-#include <platforms/willow.h>
-#endif
-
-#ifdef CONFIG_TQM8260
-#include <platforms/tqm8260.h>
-#endif
-
-#ifdef CONFIG_PCI_8260
-#include <syslib/m82xx_pci.h>
-#endif
-
-/* Make sure the memory translation stuff is there if PCI not used.
- */
-#ifndef _IO_BASE
-#define _IO_BASE 0
-#endif
-
-#ifndef _ISA_MEM_BASE
-#define _ISA_MEM_BASE 0
-#endif
-
-#ifndef PCI_DRAM_OFFSET
-#define PCI_DRAM_OFFSET 0
-#endif
-
-/* Map 256MB I/O region
- */
-#ifndef IO_PHYS_ADDR
-#define IO_PHYS_ADDR 0xe0000000
-#endif
-#ifndef IO_VIRT_ADDR
-#define IO_VIRT_ADDR IO_PHYS_ADDR
-#endif
-
-enum ppc_sys_devices {
- MPC82xx_CPM_FCC1,
- MPC82xx_CPM_FCC2,
- MPC82xx_CPM_FCC3,
- MPC82xx_CPM_I2C,
- MPC82xx_CPM_SCC1,
- MPC82xx_CPM_SCC2,
- MPC82xx_CPM_SCC3,
- MPC82xx_CPM_SCC4,
- MPC82xx_CPM_SPI,
- MPC82xx_CPM_MCC1,
- MPC82xx_CPM_MCC2,
- MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2,
- MPC82xx_CPM_USB,
- MPC82xx_SEC1,
- MPC82xx_MDIO_BB,
- NUM_PPC_SYS_DEVS,
-};
-
-#ifndef __ASSEMBLY__
-/* The "residual" data board information structure the boot loader
- * hands to us.
- */
-extern unsigned char __res[];
-#endif
-
-#ifndef BOARD_CHIP_NAME
-#define BOARD_CHIP_NAME ""
-#endif
-
-#endif /* CONFIG_8260 */
-#endif /* !__ASM_PPC_MPC8260_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8260_pci9.h b/include/asm-ppc/mpc8260_pci9.h
deleted file mode 100644
index 9f7176881c56..000000000000
--- a/include/asm-ppc/mpc8260_pci9.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* include/asm-ppc/mpc8260_pci9.h
- *
- * Undefine the PCI read* and in* macros so we can define them as functions
- * that implement the workaround for the MPC8260 device erratum PCI 9.
- *
- * This header file should only be included at the end of include/asm-ppc/io.h
- * and never included directly anywhere else.
- *
- * Author: andy_lowe@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _PPC_IO_H
-#error "Do not include mpc8260_pci9.h directly."
-#endif
-
-#ifdef __KERNEL__
-#ifndef __CONFIG_8260_PCI9_DEFS
-#define __CONFIG_8260_PCI9_DEFS
-
-#undef readb
-#undef readw
-#undef readl
-#undef insb
-#undef insw
-#undef insl
-#undef inb
-#undef inw
-#undef inl
-#undef memcpy_fromio
-
-extern int readb(volatile unsigned char *addr);
-extern int readw(volatile unsigned short *addr);
-extern unsigned readl(volatile unsigned *addr);
-extern void insb(unsigned port, void *buf, int ns);
-extern void insw(unsigned port, void *buf, int ns);
-extern void insl(unsigned port, void *buf, int nl);
-extern int inb(unsigned port);
-extern int inw(unsigned port);
-extern unsigned inl(unsigned port);
-extern void *memcpy_fromio(void *dest, unsigned long src, size_t count);
-
-#endif /* !__CONFIG_8260_PCI9_DEFS */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
deleted file mode 100644
index b9e3060b0278..000000000000
--- a/include/asm-ppc/mpc8xx.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* This is the single file included by all MPC8xx build options.
- * Since there are many different boards and no standard configuration,
- * we have a unique include file for each. Rather than change every
- * file that has to include MPC8xx configuration, they all include
- * this one and the configuration switching is done here.
- */
-#ifdef __KERNEL__
-#ifndef __CONFIG_8xx_DEFS
-#define __CONFIG_8xx_DEFS
-
-
-#ifdef CONFIG_8xx
-
-#ifdef CONFIG_MBX
-#include <platforms/mbx.h>
-#endif
-
-#ifdef CONFIG_FADS
-#include <platforms/fads.h>
-#endif
-
-#ifdef CONFIG_RPXLITE
-#include <platforms/rpxlite.h>
-#endif
-
-#ifdef CONFIG_BSEIP
-#include <platforms/bseip.h>
-#endif
-
-#ifdef CONFIG_RPXCLASSIC
-#include <platforms/rpxclassic.h>
-#endif
-
-#if defined(CONFIG_TQM8xxL)
-#include <platforms/tqm8xx.h>
-#endif
-
-#if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24)
-#include <platforms/ivms8.h>
-#endif
-
-#if defined(CONFIG_HERMES_PRO)
-#include <platforms/hermes.h>
-#endif
-
-#if defined(CONFIG_IP860)
-#include <platforms/ip860.h>
-#endif
-
-#if defined(CONFIG_LWMON)
-#include <platforms/lwmon.h>
-#endif
-
-#if defined(CONFIG_PCU_E)
-#include <platforms/pcu_e.h>
-#endif
-
-#if defined(CONFIG_CCM)
-#include <platforms/ccm.h>
-#endif
-
-#if defined(CONFIG_LANTEC)
-#include <platforms/lantec.h>
-#endif
-
-/* Currently, all 8xx boards that support a processor to PCI/ISA bridge
- * use the same memory map.
- */
-#if 0
-#if defined(CONFIG_PCI) && defined(PCI_ISA_IO_ADDR)
-#define _IO_BASE PCI_ISA_IO_ADDR
-#define _ISA_MEM_BASE PCI_ISA_MEM_ADDR
-#define PCI_DRAM_OFFSET 0x80000000
-#else
-#define _IO_BASE 0
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#endif
-#else
-#if !defined(_IO_BASE) /* defined in board specific header */
-#define _IO_BASE 0
-#endif
-#define _ISA_MEM_BASE 0
-#define PCI_DRAM_OFFSET 0
-#endif
-
-#ifndef __ASSEMBLY__
-/* The "residual" data board information structure the boot loader
- * hands to us.
- */
-extern unsigned char __res[];
-
-struct pt_regs;
-
-enum ppc_sys_devices {
- MPC8xx_CPM_FEC1,
- MPC8xx_CPM_FEC2,
- MPC8xx_CPM_I2C,
- MPC8xx_CPM_SCC1,
- MPC8xx_CPM_SCC2,
- MPC8xx_CPM_SCC3,
- MPC8xx_CPM_SCC4,
- MPC8xx_CPM_SPI,
- MPC8xx_CPM_MCC1,
- MPC8xx_CPM_MCC2,
- MPC8xx_CPM_SMC1,
- MPC8xx_CPM_SMC2,
- MPC8xx_CPM_USB,
- MPC8xx_MDIO_FEC,
- NUM_PPC_SYS_DEVS,
-};
-
-#define PPC_PIN_SIZE (24 * 1024 * 1024) /* 24Mbytes of data pinned */
-
-#ifndef BOARD_CHIP_NAME
-#define BOARD_CHIP_NAME ""
-#endif
-
-#endif /* !__ASSEMBLY__ */
-#endif /* CONFIG_8xx */
-#endif /* __CONFIG_8xx_DEFS */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mv64x60.h b/include/asm-ppc/mv64x60.h
deleted file mode 100644
index 2963d6aa3ea5..000000000000
--- a/include/asm-ppc/mv64x60.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * include/asm-ppc/mv64x60.h
- *
- * Prototypes, etc. for the Marvell/Galileo MV64x60 host bridge routines.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_MV64x60_H
-#define __ASMPPC_MV64x60_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mv64x60_defs.h>
-
-struct platform_device;
-
-extern u8 mv64x60_pci_exclude_bridge;
-
-extern spinlock_t mv64x60_lock;
-
-/* 32-bit Window table entry defines */
-#define MV64x60_CPU2MEM_0_WIN 0
-#define MV64x60_CPU2MEM_1_WIN 1
-#define MV64x60_CPU2MEM_2_WIN 2
-#define MV64x60_CPU2MEM_3_WIN 3
-#define MV64x60_CPU2DEV_0_WIN 4
-#define MV64x60_CPU2DEV_1_WIN 5
-#define MV64x60_CPU2DEV_2_WIN 6
-#define MV64x60_CPU2DEV_3_WIN 7
-#define MV64x60_CPU2BOOT_WIN 8
-#define MV64x60_CPU2PCI0_IO_WIN 9
-#define MV64x60_CPU2PCI0_MEM_0_WIN 10
-#define MV64x60_CPU2PCI0_MEM_1_WIN 11
-#define MV64x60_CPU2PCI0_MEM_2_WIN 12
-#define MV64x60_CPU2PCI0_MEM_3_WIN 13
-#define MV64x60_CPU2PCI1_IO_WIN 14
-#define MV64x60_CPU2PCI1_MEM_0_WIN 15
-#define MV64x60_CPU2PCI1_MEM_1_WIN 16
-#define MV64x60_CPU2PCI1_MEM_2_WIN 17
-#define MV64x60_CPU2PCI1_MEM_3_WIN 18
-#define MV64x60_CPU2SRAM_WIN 19
-#define MV64x60_CPU2PCI0_IO_REMAP_WIN 20
-#define MV64x60_CPU2PCI1_IO_REMAP_WIN 21
-#define MV64x60_CPU_PROT_0_WIN 22
-#define MV64x60_CPU_PROT_1_WIN 23
-#define MV64x60_CPU_PROT_2_WIN 24
-#define MV64x60_CPU_PROT_3_WIN 25
-#define MV64x60_CPU_SNOOP_0_WIN 26
-#define MV64x60_CPU_SNOOP_1_WIN 27
-#define MV64x60_CPU_SNOOP_2_WIN 28
-#define MV64x60_CPU_SNOOP_3_WIN 29
-#define MV64x60_PCI02MEM_REMAP_0_WIN 30
-#define MV64x60_PCI02MEM_REMAP_1_WIN 31
-#define MV64x60_PCI02MEM_REMAP_2_WIN 32
-#define MV64x60_PCI02MEM_REMAP_3_WIN 33
-#define MV64x60_PCI12MEM_REMAP_0_WIN 34
-#define MV64x60_PCI12MEM_REMAP_1_WIN 35
-#define MV64x60_PCI12MEM_REMAP_2_WIN 36
-#define MV64x60_PCI12MEM_REMAP_3_WIN 37
-#define MV64x60_ENET2MEM_0_WIN 38
-#define MV64x60_ENET2MEM_1_WIN 39
-#define MV64x60_ENET2MEM_2_WIN 40
-#define MV64x60_ENET2MEM_3_WIN 41
-#define MV64x60_ENET2MEM_4_WIN 42
-#define MV64x60_ENET2MEM_5_WIN 43
-#define MV64x60_MPSC2MEM_0_WIN 44
-#define MV64x60_MPSC2MEM_1_WIN 45
-#define MV64x60_MPSC2MEM_2_WIN 46
-#define MV64x60_MPSC2MEM_3_WIN 47
-#define MV64x60_IDMA2MEM_0_WIN 48
-#define MV64x60_IDMA2MEM_1_WIN 49
-#define MV64x60_IDMA2MEM_2_WIN 50
-#define MV64x60_IDMA2MEM_3_WIN 51
-#define MV64x60_IDMA2MEM_4_WIN 52
-#define MV64x60_IDMA2MEM_5_WIN 53
-#define MV64x60_IDMA2MEM_6_WIN 54
-#define MV64x60_IDMA2MEM_7_WIN 55
-
-#define MV64x60_32BIT_WIN_COUNT 56
-
-/* 64-bit Window table entry defines */
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_WIN 0
-#define MV64x60_CPU2PCI0_MEM_1_REMAP_WIN 1
-#define MV64x60_CPU2PCI0_MEM_2_REMAP_WIN 2
-#define MV64x60_CPU2PCI0_MEM_3_REMAP_WIN 3
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_WIN 4
-#define MV64x60_CPU2PCI1_MEM_1_REMAP_WIN 5
-#define MV64x60_CPU2PCI1_MEM_2_REMAP_WIN 6
-#define MV64x60_CPU2PCI1_MEM_3_REMAP_WIN 7
-#define MV64x60_PCI02MEM_ACC_CNTL_0_WIN 8
-#define MV64x60_PCI02MEM_ACC_CNTL_1_WIN 9
-#define MV64x60_PCI02MEM_ACC_CNTL_2_WIN 10
-#define MV64x60_PCI02MEM_ACC_CNTL_3_WIN 11
-#define MV64x60_PCI12MEM_ACC_CNTL_0_WIN 12
-#define MV64x60_PCI12MEM_ACC_CNTL_1_WIN 13
-#define MV64x60_PCI12MEM_ACC_CNTL_2_WIN 14
-#define MV64x60_PCI12MEM_ACC_CNTL_3_WIN 15
-#define MV64x60_PCI02MEM_SNOOP_0_WIN 16
-#define MV64x60_PCI02MEM_SNOOP_1_WIN 17
-#define MV64x60_PCI02MEM_SNOOP_2_WIN 18
-#define MV64x60_PCI02MEM_SNOOP_3_WIN 19
-#define MV64x60_PCI12MEM_SNOOP_0_WIN 20
-#define MV64x60_PCI12MEM_SNOOP_1_WIN 21
-#define MV64x60_PCI12MEM_SNOOP_2_WIN 22
-#define MV64x60_PCI12MEM_SNOOP_3_WIN 23
-
-#define MV64x60_64BIT_WIN_COUNT 24
-
-/*
- * Define a structure that's used to pass in config information to the
- * core routines.
- */
-struct mv64x60_pci_window {
- u32 cpu_base;
- u32 pci_base_hi;
- u32 pci_base_lo;
- u32 size;
- u32 swap;
-};
-
-struct mv64x60_pci_info {
- u8 enable_bus; /* allow access to this PCI bus? */
-
- struct mv64x60_pci_window pci_io;
- struct mv64x60_pci_window pci_mem[3];
-
- u32 acc_cntl_options[MV64x60_CPU2MEM_WINDOWS];
- u32 snoop_options[MV64x60_CPU2MEM_WINDOWS];
- u16 pci_cmd_bits;
- u16 latency_timer;
-};
-
-struct mv64x60_setup_info {
- u32 phys_reg_base;
- u32 window_preserve_mask_32_hi;
- u32 window_preserve_mask_32_lo;
- u32 window_preserve_mask_64;
-
- u32 cpu_prot_options[MV64x60_CPU2MEM_WINDOWS];
- u32 cpu_snoop_options[MV64x60_CPU2MEM_WINDOWS];
- u32 enet_options[MV64x60_CPU2MEM_WINDOWS];
- u32 mpsc_options[MV64x60_CPU2MEM_WINDOWS];
- u32 idma_options[MV64x60_CPU2MEM_WINDOWS];
-
- struct mv64x60_pci_info pci_0;
- struct mv64x60_pci_info pci_1;
-};
-
-/* Define what the top bits in the extra member of a window entry means. */
-#define MV64x60_EXTRA_INVALID 0x00000000
-#define MV64x60_EXTRA_CPUWIN_ENAB 0x10000000
-#define MV64x60_EXTRA_CPUPROT_ENAB 0x20000000
-#define MV64x60_EXTRA_ENET_ENAB 0x30000000
-#define MV64x60_EXTRA_MPSC_ENAB 0x40000000
-#define MV64x60_EXTRA_IDMA_ENAB 0x50000000
-#define MV64x60_EXTRA_PCIACC_ENAB 0x60000000
-
-#define MV64x60_EXTRA_MASK 0xf0000000
-
-/*
- * Define the 'handle' struct that will be passed between the 64x60 core
- * code and the platform-specific code that will use it. The handle
- * will contain pointers to chip-specific routines & information.
- */
-struct mv64x60_32bit_window {
- u32 base_reg;
- u32 size_reg;
- u8 base_bits;
- u8 size_bits;
- u32 (*get_from_field)(u32 val, u32 num_bits);
- u32 (*map_to_field)(u32 val, u32 num_bits);
- u32 extra;
-};
-
-struct mv64x60_64bit_window {
- u32 base_hi_reg;
- u32 base_lo_reg;
- u32 size_reg;
- u8 base_lo_bits;
- u8 size_bits;
- u32 (*get_from_field)(u32 val, u32 num_bits);
- u32 (*map_to_field)(u32 val, u32 num_bits);
- u32 extra;
-};
-
-typedef struct mv64x60_handle mv64x60_handle_t;
-struct mv64x60_chip_info {
- u32 (*translate_size)(u32 base, u32 size, u32 num_bits);
- u32 (*untranslate_size)(u32 base, u32 size, u32 num_bits);
- void (*set_pci2mem_window)(struct pci_controller *hose, u32 bus,
- u32 window, u32 base);
- void (*set_pci2regs_window)(struct mv64x60_handle *bh,
- struct pci_controller *hose, u32 bus, u32 base);
- u32 (*is_enabled_32bit)(mv64x60_handle_t *bh, u32 window);
- void (*enable_window_32bit)(mv64x60_handle_t *bh, u32 window);
- void (*disable_window_32bit)(mv64x60_handle_t *bh, u32 window);
- void (*enable_window_64bit)(mv64x60_handle_t *bh, u32 window);
- void (*disable_window_64bit)(mv64x60_handle_t *bh, u32 window);
- void (*disable_all_windows)(mv64x60_handle_t *bh,
- struct mv64x60_setup_info *si);
- void (*config_io2mem_windows)(mv64x60_handle_t *bh,
- struct mv64x60_setup_info *si,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
- void (*set_mpsc2regs_window)(struct mv64x60_handle *bh, u32 base);
- void (*chip_specific_init)(mv64x60_handle_t *bh,
- struct mv64x60_setup_info *si);
-
- struct mv64x60_32bit_window *window_tab_32bit;
- struct mv64x60_64bit_window *window_tab_64bit;
-};
-
-struct mv64x60_handle {
- u32 type; /* type of bridge */
- u32 rev; /* revision of bridge */
- void __iomem *v_base;/* virtual base addr of bridge regs */
- phys_addr_t p_base; /* physical base addr of bridge regs */
-
- u32 pci_mode_a; /* pci 0 mode: conventional pci, pci-x*/
- u32 pci_mode_b; /* pci 1 mode: conventional pci, pci-x*/
-
- u32 io_base_a; /* vaddr of pci 0's I/O space */
- u32 io_base_b; /* vaddr of pci 1's I/O space */
-
- struct pci_controller *hose_a;
- struct pci_controller *hose_b;
-
- struct mv64x60_chip_info *ci; /* chip/bridge-specific info */
-};
-
-
-/* Define I/O routines for accessing registers on the 64x60 bridge. */
-extern inline void
-mv64x60_write(struct mv64x60_handle *bh, u32 offset, u32 val) {
- ulong flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- out_le32(bh->v_base + offset, val);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
-}
-
-extern inline u32
-mv64x60_read(struct mv64x60_handle *bh, u32 offset) {
- ulong flags;
- u32 reg;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- reg = in_le32(bh->v_base + offset);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- return reg;
-}
-
-extern inline void
-mv64x60_modify(struct mv64x60_handle *bh, u32 offs, u32 data, u32 mask)
-{
- u32 reg;
- ulong flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- reg = in_le32(bh->v_base + offs) & (~mask);
- reg |= data & mask;
- out_le32(bh->v_base + offs, reg);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
-}
-
-#define mv64x60_set_bits(bh, offs, bits) mv64x60_modify(bh, offs, ~0, bits)
-#define mv64x60_clr_bits(bh, offs, bits) mv64x60_modify(bh, offs, 0, bits)
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-#define MV64XXX_DEV_NAME "mv64xxx"
-
-struct mv64xxx_pdata {
- u32 hs_reg_valid;
-};
-#endif
-
-/* Externally visible function prototypes */
-int mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si);
-u32 mv64x60_get_mem_size(u32 bridge_base, u32 chip_type);
-void mv64x60_early_init(struct mv64x60_handle *bh,
- struct mv64x60_setup_info *si);
-void mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr,
- u32 cfg_data, struct pci_controller **hose);
-int mv64x60_get_type(struct mv64x60_handle *bh);
-int mv64x60_setup_for_chip(struct mv64x60_handle *bh);
-void __iomem *mv64x60_get_bridge_vbase(void);
-u32 mv64x60_get_bridge_type(void);
-u32 mv64x60_get_bridge_rev(void);
-void mv64x60_get_mem_windows(struct mv64x60_handle *bh,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-void mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
- struct mv64x60_setup_info *si,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-void mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
- struct mv64x60_pci_info *pi, u32 bus);
-void mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
- struct pci_controller *hose, struct mv64x60_pci_info *pi, u32 bus,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-void mv64x60_config_resources(struct pci_controller *hose,
- struct mv64x60_pci_info *pi, u32 io_base);
-void mv64x60_config_pci_params(struct pci_controller *hose,
- struct mv64x60_pci_info *pi);
-void mv64x60_pd_fixup(struct mv64x60_handle *bh,
- struct platform_device *pd_devs[], u32 entries);
-void mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
- u32 *base, u32 *size);
-void mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window, u32 base,
- u32 size, u32 other_bits);
-void mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
- u32 *base_hi, u32 *base_lo, u32 *size);
-void mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
- u32 base_hi, u32 base_lo, u32 size, u32 other_bits);
-void mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus);
-int mv64x60_pci_exclude_device(u8 bus, u8 devfn);
-
-
-void gt64260_init_irq(void);
-int gt64260_get_irq(void);
-void mv64360_init_irq(void);
-int mv64360_get_irq(void);
-
-u32 mv64x60_mask(u32 val, u32 num_bits);
-u32 mv64x60_shift_left(u32 val, u32 num_bits);
-u32 mv64x60_shift_right(u32 val, u32 num_bits);
-u32 mv64x60_calc_mem_size(struct mv64x60_handle *bh,
- u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-
-void mv64x60_progress_init(u32 base);
-void mv64x60_mpsc_progress(char *s, unsigned short hex);
-
-extern struct mv64x60_32bit_window
- gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT];
-extern struct mv64x60_64bit_window
- gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT];
-extern struct mv64x60_32bit_window
- mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT];
-extern struct mv64x60_64bit_window
- mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT];
-
-#endif /* __ASMPPC_MV64x60_H */
diff --git a/include/asm-ppc/mv64x60_defs.h b/include/asm-ppc/mv64x60_defs.h
deleted file mode 100644
index 5b0704a3e6ea..000000000000
--- a/include/asm-ppc/mv64x60_defs.h
+++ /dev/null
@@ -1,976 +0,0 @@
-/*
- * include/asm-ppc/mv64x60_defs.h
- *
- * Register definitions for the Marvell/Galileo GT64260, MV64360, etc.
- * host bridges.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASMPPC_MV64x60_DEFS_H
-#define __ASMPPC_MV64x60_DEFS_H
-
-/*
- * Define the Marvell bridges that are supported
- */
-#define MV64x60_TYPE_INVALID 0
-#define MV64x60_TYPE_GT64260A 1
-#define MV64x60_TYPE_GT64260B 2
-#define MV64x60_TYPE_MV64360 3
-#define MV64x60_TYPE_MV64361 4
-#define MV64x60_TYPE_MV64362 5
-#define MV64x60_TYPE_MV64460 6
-
-
-/* Revisions of each supported chip */
-#define GT64260_REV_A 0x10
-#define GT64260_REV_B 0x20
-#define MV64360 0x01
-#define MV64460 0x01
-
-/* Minimum window size supported by 64260 is 1MB */
-#define GT64260_WINDOW_SIZE_MIN 0x00100000
-#define MV64360_WINDOW_SIZE_MIN 0x00010000
-
-#define MV64x60_TCLK_FREQ_MAX 133333333U
-
-/* IRQ's for embedded controllers */
-#define MV64x60_IRQ_DEV 1
-#define MV64x60_IRQ_CPU_ERR 3
-#define MV64x60_IRQ_TIMER_0_1 8
-#define MV64x60_IRQ_TIMER_2_3 9
-#define MV64x60_IRQ_TIMER_4_5 10
-#define MV64x60_IRQ_TIMER_6_7 11
-#define MV64x60_IRQ_P1_GPP_0_7 24
-#define MV64x60_IRQ_P1_GPP_8_15 25
-#define MV64x60_IRQ_P1_GPP_16_23 26
-#define MV64x60_IRQ_P1_GPP_24_31 27
-#define MV64x60_IRQ_DOORBELL 28
-#define MV64x60_IRQ_ETH_0 32
-#define MV64x60_IRQ_ETH_1 33
-#define MV64x60_IRQ_ETH_2 34
-#define MV64x60_IRQ_SDMA_0 36
-#define MV64x60_IRQ_I2C 37
-#define MV64x60_IRQ_BRG 39
-#define MV64x60_IRQ_MPSC_0 40
-#define MV64x60_IRQ_MPSC_1 42
-#define MV64x60_IRQ_COMM 43
-#define MV64x60_IRQ_P0_GPP_0_7 56
-#define MV64x60_IRQ_P0_GPP_8_15 57
-#define MV64x60_IRQ_P0_GPP_16_23 58
-#define MV64x60_IRQ_P0_GPP_24_31 59
-
-#define MV64360_IRQ_PCI0 12
-#define MV64360_IRQ_SRAM_PAR_ERR 13
-#define MV64360_IRQ_PCI1 16
-#define MV64360_IRQ_SDMA_1 38
-
-#define MV64x60_IRQ_GPP0 64
-#define MV64x60_IRQ_GPP1 65
-#define MV64x60_IRQ_GPP2 66
-#define MV64x60_IRQ_GPP3 67
-#define MV64x60_IRQ_GPP4 68
-#define MV64x60_IRQ_GPP5 69
-#define MV64x60_IRQ_GPP6 70
-#define MV64x60_IRQ_GPP7 71
-#define MV64x60_IRQ_GPP8 72
-#define MV64x60_IRQ_GPP9 73
-#define MV64x60_IRQ_GPP10 74
-#define MV64x60_IRQ_GPP11 75
-#define MV64x60_IRQ_GPP12 76
-#define MV64x60_IRQ_GPP13 77
-#define MV64x60_IRQ_GPP14 78
-#define MV64x60_IRQ_GPP15 79
-#define MV64x60_IRQ_GPP16 80
-#define MV64x60_IRQ_GPP17 81
-#define MV64x60_IRQ_GPP18 82
-#define MV64x60_IRQ_GPP19 83
-#define MV64x60_IRQ_GPP20 84
-#define MV64x60_IRQ_GPP21 85
-#define MV64x60_IRQ_GPP22 86
-#define MV64x60_IRQ_GPP23 87
-#define MV64x60_IRQ_GPP24 88
-#define MV64x60_IRQ_GPP25 89
-#define MV64x60_IRQ_GPP26 90
-#define MV64x60_IRQ_GPP27 91
-#define MV64x60_IRQ_GPP28 92
-#define MV64x60_IRQ_GPP29 93
-#define MV64x60_IRQ_GPP30 94
-#define MV64x60_IRQ_GPP31 95
-
-/* Offsets for register blocks */
-#define GT64260_ENET_PHY_ADDR 0x2000
-#define GT64260_ENET_ESMIR 0x2010
-#define GT64260_ENET_0_OFFSET 0x2400
-#define GT64260_ENET_1_OFFSET 0x2800
-#define GT64260_ENET_2_OFFSET 0x2c00
-#define MV64x60_SDMA_0_OFFSET 0x4000
-#define MV64x60_SDMA_1_OFFSET 0x6000
-#define MV64x60_MPSC_0_OFFSET 0x8000
-#define MV64x60_MPSC_1_OFFSET 0x9000
-#define MV64x60_MPSC_ROUTING_OFFSET 0xb400
-#define MV64x60_SDMA_INTR_OFFSET 0xb800
-#define MV64x60_BRG_0_OFFSET 0xb200
-#define MV64x60_BRG_1_OFFSET 0xb208
-
-/*
- *****************************************************************************
- *
- * CPU Interface Registers
- *
- *****************************************************************************
- */
-
-/* CPU physical address of bridge's registers */
-#define MV64x60_INTERNAL_SPACE_DECODE 0x0068
-#define MV64x60_INTERNAL_SPACE_SIZE 0x10000
-#define MV64x60_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000
-
-#define MV64360_CPU_BAR_ENABLE 0x0278
-
-/* CPU Memory Controller Window Registers (4 windows) */
-#define MV64x60_CPU2MEM_WINDOWS 4
-
-#define MV64x60_CPU2MEM_0_BASE 0x0008
-#define MV64x60_CPU2MEM_0_SIZE 0x0010
-#define MV64x60_CPU2MEM_1_BASE 0x0208
-#define MV64x60_CPU2MEM_1_SIZE 0x0210
-#define MV64x60_CPU2MEM_2_BASE 0x0018
-#define MV64x60_CPU2MEM_2_SIZE 0x0020
-#define MV64x60_CPU2MEM_3_BASE 0x0218
-#define MV64x60_CPU2MEM_3_SIZE 0x0220
-
-/* CPU Device Controller Window Registers (4 windows) */
-#define MV64x60_CPU2DEV_WINDOWS 4
-
-#define MV64x60_CPU2DEV_0_BASE 0x0028
-#define MV64x60_CPU2DEV_0_SIZE 0x0030
-#define MV64x60_CPU2DEV_1_BASE 0x0228
-#define MV64x60_CPU2DEV_1_SIZE 0x0230
-#define MV64x60_CPU2DEV_2_BASE 0x0248
-#define MV64x60_CPU2DEV_2_SIZE 0x0250
-#define MV64x60_CPU2DEV_3_BASE 0x0038
-#define MV64x60_CPU2DEV_3_SIZE 0x0040
-
-#define MV64x60_CPU2BOOT_0_BASE 0x0238
-#define MV64x60_CPU2BOOT_0_SIZE 0x0240
-
-#define MV64360_CPU2SRAM_BASE 0x0268
-
-/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */
-#define MV64x60_PCI_BUSES 2
-#define MV64x60_PCI_IO_WINDOWS_PER_BUS 1
-#define MV64x60_PCI_MEM_WINDOWS_PER_BUS 4
-
-#define MV64x60_CPU2PCI_SWAP_BYTE 0x00000000
-#define MV64x60_CPU2PCI_SWAP_NONE 0x01000000
-#define MV64x60_CPU2PCI_SWAP_BYTE_WORD 0x02000000
-#define MV64x60_CPU2PCI_SWAP_WORD 0x03000000
-
-#define MV64x60_CPU2PCI_MEM_REQ64 (1<<27)
-
-#define MV64x60_CPU2PCI0_IO_BASE 0x0048
-#define MV64x60_CPU2PCI0_IO_SIZE 0x0050
-#define MV64x60_CPU2PCI0_MEM_0_BASE 0x0058
-#define MV64x60_CPU2PCI0_MEM_0_SIZE 0x0060
-#define MV64x60_CPU2PCI0_MEM_1_BASE 0x0080
-#define MV64x60_CPU2PCI0_MEM_1_SIZE 0x0088
-#define MV64x60_CPU2PCI0_MEM_2_BASE 0x0258
-#define MV64x60_CPU2PCI0_MEM_2_SIZE 0x0260
-#define MV64x60_CPU2PCI0_MEM_3_BASE 0x0280
-#define MV64x60_CPU2PCI0_MEM_3_SIZE 0x0288
-
-#define MV64x60_CPU2PCI0_IO_REMAP 0x00f0
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO 0x00f8
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI 0x0320
-#define MV64x60_CPU2PCI0_MEM_1_REMAP_LO 0x0100
-#define MV64x60_CPU2PCI0_MEM_1_REMAP_HI 0x0328
-#define MV64x60_CPU2PCI0_MEM_2_REMAP_LO 0x02f8
-#define MV64x60_CPU2PCI0_MEM_2_REMAP_HI 0x0330
-#define MV64x60_CPU2PCI0_MEM_3_REMAP_LO 0x0300
-#define MV64x60_CPU2PCI0_MEM_3_REMAP_HI 0x0338
-
-#define MV64x60_CPU2PCI1_IO_BASE 0x0090
-#define MV64x60_CPU2PCI1_IO_SIZE 0x0098
-#define MV64x60_CPU2PCI1_MEM_0_BASE 0x00a0
-#define MV64x60_CPU2PCI1_MEM_0_SIZE 0x00a8
-#define MV64x60_CPU2PCI1_MEM_1_BASE 0x00b0
-#define MV64x60_CPU2PCI1_MEM_1_SIZE 0x00b8
-#define MV64x60_CPU2PCI1_MEM_2_BASE 0x02a0
-#define MV64x60_CPU2PCI1_MEM_2_SIZE 0x02a8
-#define MV64x60_CPU2PCI1_MEM_3_BASE 0x02b0
-#define MV64x60_CPU2PCI1_MEM_3_SIZE 0x02b8
-
-#define MV64x60_CPU2PCI1_IO_REMAP 0x0108
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO 0x0110
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI 0x0340
-#define MV64x60_CPU2PCI1_MEM_1_REMAP_LO 0x0118
-#define MV64x60_CPU2PCI1_MEM_1_REMAP_HI 0x0348
-#define MV64x60_CPU2PCI1_MEM_2_REMAP_LO 0x0310
-#define MV64x60_CPU2PCI1_MEM_2_REMAP_HI 0x0350
-#define MV64x60_CPU2PCI1_MEM_3_REMAP_LO 0x0318
-#define MV64x60_CPU2PCI1_MEM_3_REMAP_HI 0x0358
-
-/* CPU Control Registers */
-#define MV64x60_CPU_CONFIG 0x0000
-#define MV64x60_CPU_MODE 0x0120
-#define MV64x60_CPU_MASTER_CNTL 0x0160
-#define MV64x60_CPU_XBAR_CNTL_LO 0x0150
-#define MV64x60_CPU_XBAR_CNTL_HI 0x0158
-#define MV64x60_CPU_XBAR_TO 0x0168
-
-#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170
-#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178
-
-#define MV64360_CPU_PADS_CALIBRATION 0x03b4
-#define MV64360_CPU_RESET_SAMPLE_LO 0x03c4
-#define MV64360_CPU_RESET_SAMPLE_HI 0x03d4
-
-/* SMP Register Map */
-#define MV64360_WHO_AM_I 0x0200
-#define MV64360_CPU0_DOORBELL 0x0214
-#define MV64360_CPU0_DOORBELL_CLR 0x021c
-#define MV64360_CPU0_DOORBELL_MASK 0x0234
-#define MV64360_CPU1_DOORBELL 0x0224
-#define MV64360_CPU1_DOORBELL_CLR 0x022c
-#define MV64360_CPU1_DOORBELL_MASK 0x023c
-#define MV64360_CPUx_DOORBELL(x) (0x0214 + ((x)*0x10))
-#define MV64360_CPUx_DOORBELL_CLR(x) (0x021c + ((x)*0x10))
-#define MV64360_CPUx_DOORBELL_MASK(x) (0x0234 + ((x)*0x08))
-#define MV64360_SEMAPHORE_0 0x0244
-#define MV64360_SEMAPHORE_1 0x024c
-#define MV64360_SEMAPHORE_2 0x0254
-#define MV64360_SEMAPHORE_3 0x025c
-#define MV64360_SEMAPHORE_4 0x0264
-#define MV64360_SEMAPHORE_5 0x026c
-#define MV64360_SEMAPHORE_6 0x0274
-#define MV64360_SEMAPHORE_7 0x027c
-
-/* CPU Sync Barrier Registers */
-#define GT64260_CPU_SYNC_BARRIER_PCI0 0x00c0
-#define GT64260_CPU_SYNC_BARRIER_PCI1 0x00c8
-
-#define MV64360_CPU0_SYNC_BARRIER_TRIG 0x00c0
-#define MV64360_CPU0_SYNC_BARRIER_VIRT 0x00c8
-#define MV64360_CPU1_SYNC_BARRIER_TRIG 0x00d0
-#define MV64360_CPU1_SYNC_BARRIER_VIRT 0x00d8
-
-/* CPU Deadlock and Ordering registers (Rev B part only) */
-#define GT64260_CPU_DEADLOCK_ORDERING 0x02d0
-#define GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH 0x02d8
-#define GT64260_CPU_COUNTERS_SYNC_BARRIER_ATTRIBUTE 0x02e0
-
-/* CPU Access Protection Registers (gt64260 realy has 8 but don't need) */
-#define MV64x260_CPU_PROT_WINDOWS 4
-
-#define GT64260_CPU_PROT_ACCPROTECT (1<<16)
-#define GT64260_CPU_PROT_WRPROTECT (1<<17)
-#define GT64260_CPU_PROT_CACHEPROTECT (1<<18)
-
-#define MV64360_CPU_PROT_ACCPROTECT (1<<20)
-#define MV64360_CPU_PROT_WRPROTECT (1<<21)
-#define MV64360_CPU_PROT_CACHEPROTECT (1<<22)
-#define MV64360_CPU_PROT_WIN_ENABLE (1<<31)
-
-#define MV64x60_CPU_PROT_BASE_0 0x0180
-#define MV64x60_CPU_PROT_SIZE_0 0x0188
-#define MV64x60_CPU_PROT_BASE_1 0x0190
-#define MV64x60_CPU_PROT_SIZE_1 0x0198
-#define MV64x60_CPU_PROT_BASE_2 0x01a0
-#define MV64x60_CPU_PROT_SIZE_2 0x01a8
-#define MV64x60_CPU_PROT_BASE_3 0x01b0
-#define MV64x60_CPU_PROT_SIZE_3 0x01b8
-
-#define GT64260_CPU_PROT_BASE_4 0x01c0
-#define GT64260_CPU_PROT_SIZE_4 0x01c8
-#define GT64260_CPU_PROT_BASE_5 0x01d0
-#define GT64260_CPU_PROT_SIZE_5 0x01d8
-#define GT64260_CPU_PROT_BASE_6 0x01e0
-#define GT64260_CPU_PROT_SIZE_6 0x01e8
-#define GT64260_CPU_PROT_BASE_7 0x01f0
-#define GT64260_CPU_PROT_SIZE_7 0x01f8
-
-/* CPU Snoop Control Registers (64260 only) */
-#define GT64260_CPU_SNOOP_WINDOWS 4
-
-#define GT64260_CPU_SNOOP_NONE 0x00000000
-#define GT64260_CPU_SNOOP_WT 0x00010000
-#define GT64260_CPU_SNOOP_WB 0x00020000
-#define GT64260_CPU_SNOOP_MASK 0x00030000
-#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK
-
-#define GT64260_CPU_SNOOP_BASE_0 0x0380
-#define GT64260_CPU_SNOOP_SIZE_0 0x0388
-#define GT64260_CPU_SNOOP_BASE_1 0x0390
-#define GT64260_CPU_SNOOP_SIZE_1 0x0398
-#define GT64260_CPU_SNOOP_BASE_2 0x03a0
-#define GT64260_CPU_SNOOP_SIZE_2 0x03a8
-#define GT64260_CPU_SNOOP_BASE_3 0x03b0
-#define GT64260_CPU_SNOOP_SIZE_3 0x03b8
-
-/* CPU Snoop Control Registers (64360 only) */
-#define MV64360_CPU_SNOOP_WINDOWS 4
-#define MV64360_CPU_SNOOP_NONE 0x00000000
-#define MV64360_CPU_SNOOP_WT 0x00010000
-#define MV64360_CPU_SNOOP_WB 0x00020000
-#define MV64360_CPU_SNOOP_MASK 0x00030000
-#define MV64360_CPU_SNOOP_ALL_BITS MV64360_CPU_SNOOP_MASK
-
-
-/* CPU Error Report Registers */
-#define MV64x60_CPU_ERR_ADDR_LO 0x0070
-#define MV64x60_CPU_ERR_ADDR_HI 0x0078
-#define MV64x60_CPU_ERR_DATA_LO 0x0128
-#define MV64x60_CPU_ERR_DATA_HI 0x0130
-#define MV64x60_CPU_ERR_PARITY 0x0138
-#define MV64x60_CPU_ERR_CAUSE 0x0140
-#define MV64x60_CPU_ERR_MASK 0x0148
-
-/*
- *****************************************************************************
- *
- * SRAM Controller Registers
- *
- *****************************************************************************
- */
-
-#define MV64360_SRAM_CONFIG 0x0380
-#define MV64360_SRAM_TEST_MODE 0x03f4
-#define MV64360_SRAM_ERR_CAUSE 0x0388
-#define MV64360_SRAM_ERR_ADDR_LO 0x0390
-#define MV64360_SRAM_ERR_ADDR_HI 0x03f8
-#define MV64360_SRAM_ERR_DATA_LO 0x0398
-#define MV64360_SRAM_ERR_DATA_HI 0x03a0
-#define MV64360_SRAM_ERR_PARITY 0x03a8
-
-#define MV64360_SRAM_SIZE 0x00040000 /* 2Mb/256KB SRAM */
-
-/*
- *****************************************************************************
- *
- * SDRAM/MEM Controller Registers
- *
- *****************************************************************************
- */
-
-/* SDRAM Config Registers (64260) */
-#define GT64260_SDRAM_CONFIG 0x0448
-
-/* SDRAM Error Report Registers (64260) */
-#define GT64260_SDRAM_ERR_DATA_LO 0x0484
-#define GT64260_SDRAM_ERR_DATA_HI 0x0480
-#define GT64260_SDRAM_ERR_ADDR 0x0490
-#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488
-#define GT64260_SDRAM_ERR_ECC_CALC 0x048c
-#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494
-#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498
-
-/* SDRAM Config Registers (64360) */
-#define MV64360_SDRAM_CONFIG 0x1400
-
-/* SDRAM Control Registers */
-#define MV64360_D_UNIT_CONTROL_LOW 0x1404
-#define MV64360_D_UNIT_CONTROL_HIGH 0x1424
-#define MV64460_D_UNIT_MMASK 0x14b0
-
-/* SDRAM Error Report Registers (64360) */
-#define MV64360_SDRAM_ERR_DATA_LO 0x1444
-#define MV64360_SDRAM_ERR_DATA_HI 0x1440
-#define MV64360_SDRAM_ERR_ADDR 0x1450
-#define MV64360_SDRAM_ERR_ECC_RCVD 0x1448
-#define MV64360_SDRAM_ERR_ECC_CALC 0x144c
-#define MV64360_SDRAM_ERR_ECC_CNTL 0x1454
-#define MV64360_SDRAM_ERR_ECC_ERR_CNT 0x1458
-
-/*
- *****************************************************************************
- *
- * Device/BOOT Controller Registers
- *
- *****************************************************************************
- */
-
-/* Device Control Registers */
-#define MV64x60_DEV_BANK_PARAMS_0 0x045c
-#define MV64x60_DEV_BANK_PARAMS_1 0x0460
-#define MV64x60_DEV_BANK_PARAMS_2 0x0464
-#define MV64x60_DEV_BANK_PARAMS_3 0x0468
-#define MV64x60_DEV_BOOT_PARAMS 0x046c
-#define MV64x60_DEV_IF_CNTL 0x04c0
-#define MV64x60_DEV_IF_XBAR_CNTL_LO 0x04c8
-#define MV64x60_DEV_IF_XBAR_CNTL_HI 0x04cc
-#define MV64x60_DEV_IF_XBAR_CNTL_TO 0x04c4
-
-/* Device Interrupt Registers */
-#define MV64x60_DEV_INTR_CAUSE 0x04d0
-#define MV64x60_DEV_INTR_MASK 0x04d4
-#define MV64x60_DEV_INTR_ERR_ADDR 0x04d8
-
-#define MV64360_DEV_INTR_ERR_DATA 0x04dc
-#define MV64360_DEV_INTR_ERR_PAR 0x04e0
-
-/*
- *****************************************************************************
- *
- * PCI Bridge Interface Registers
- *
- *****************************************************************************
- */
-
-/* PCI Configuration Access Registers */
-#define MV64x60_PCI0_CONFIG_ADDR 0x0cf8
-#define MV64x60_PCI0_CONFIG_DATA 0x0cfc
-#define MV64x60_PCI0_IACK 0x0c34
-
-#define MV64x60_PCI1_CONFIG_ADDR 0x0c78
-#define MV64x60_PCI1_CONFIG_DATA 0x0c7c
-#define MV64x60_PCI1_IACK 0x0cb4
-
-/* PCI Control Registers */
-#define MV64x60_PCI0_CMD 0x0c00
-#define MV64x60_PCI0_MODE 0x0d00
-#define MV64x60_PCI0_TO_RETRY 0x0c04
-#define MV64x60_PCI0_RD_BUF_DISCARD_TIMER 0x0d04
-#define MV64x60_PCI0_MSI_TRIGGER_TIMER 0x0c38
-#define MV64x60_PCI0_ARBITER_CNTL 0x1d00
-#define MV64x60_PCI0_XBAR_CNTL_LO 0x1d08
-#define MV64x60_PCI0_XBAR_CNTL_HI 0x1d0c
-#define MV64x60_PCI0_XBAR_CNTL_TO 0x1d04
-#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_LO 0x1d18
-#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_HI 0x1d1c
-#define MV64x60_PCI0_SYNC_BARRIER 0x1d10
-#define MV64x60_PCI0_P2P_CONFIG 0x1d14
-#define MV64x60_PCI0_INTR_MASK
-
-#define GT64260_PCI0_P2P_SWAP_CNTL 0x1d54
-
-#define MV64x60_PCI1_CMD 0x0c80
-#define MV64x60_PCI1_MODE 0x0d80
-#define MV64x60_PCI1_TO_RETRY 0x0c84
-#define MV64x60_PCI1_RD_BUF_DISCARD_TIMER 0x0d84
-#define MV64x60_PCI1_MSI_TRIGGER_TIMER 0x0cb8
-#define MV64x60_PCI1_ARBITER_CNTL 0x1d80
-#define MV64x60_PCI1_XBAR_CNTL_LO 0x1d88
-#define MV64x60_PCI1_XBAR_CNTL_HI 0x1d8c
-#define MV64x60_PCI1_XBAR_CNTL_TO 0x1d84
-#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_LO 0x1d98
-#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_HI 0x1d9c
-#define MV64x60_PCI1_SYNC_BARRIER 0x1d90
-#define MV64x60_PCI1_P2P_CONFIG 0x1d94
-
-#define GT64260_PCI1_P2P_SWAP_CNTL 0x1dd4
-
-/* Different modes that the pci hoses can be in (bits 5:4 in PCI Mode reg) */
-#define MV64x60_PCIMODE_CONVENTIONAL 0
-#define MV64x60_PCIMODE_PCIX_66 (1 << 4)
-#define MV64x60_PCIMODE_PCIX_100 (2 << 4)
-#define MV64x60_PCIMODE_PCIX_133 (3 << 4)
-#define MV64x60_PCIMODE_MASK (0x3 << 4)
-
-/* PCI Access Control Regions Registers */
-#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12)
-#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13)
-#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16)
-#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17)
-#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18)
-#define GT64260_PCI_ACC_CNTL_MBURST_32_BTYES 0x00000000
-#define GT64260_PCI_ACC_CNTL_MBURST_64_BYTES 0x00100000
-#define GT64260_PCI_ACC_CNTL_MBURST_128_BYTES 0x00200000
-#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
-#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000
-#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000
-#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000
-#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000
-#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28)
-#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29)
-
-#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \
- GT64260_PCI_ACC_CNTL_DREADEN | \
- GT64260_PCI_ACC_CNTL_RDPREFETCH | \
- GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\
- GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \
- GT64260_PCI_ACC_CNTL_MBURST_MASK | \
- GT64260_PCI_ACC_CNTL_SWAP_MASK | \
- GT64260_PCI_ACC_CNTL_ACCPROT| \
- GT64260_PCI_ACC_CNTL_WRPROT)
-
-#define MV64360_PCI_ACC_CNTL_ENABLE (1<<0)
-#define MV64360_PCI_ACC_CNTL_REQ64 (1<<1)
-#define MV64360_PCI_ACC_CNTL_SNOOP_NONE 0x00000000
-#define MV64360_PCI_ACC_CNTL_SNOOP_WT 0x00000004
-#define MV64360_PCI_ACC_CNTL_SNOOP_WB 0x00000008
-#define MV64360_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c
-#define MV64360_PCI_ACC_CNTL_ACCPROT (1<<4)
-#define MV64360_PCI_ACC_CNTL_WRPROT (1<<5)
-#define MV64360_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
-#define MV64360_PCI_ACC_CNTL_SWAP_NONE 0x00000040
-#define MV64360_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080
-#define MV64360_PCI_ACC_CNTL_SWAP_WORD 0x000000c0
-#define MV64360_PCI_ACC_CNTL_SWAP_MASK 0x000000c0
-#define MV64360_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000
-#define MV64360_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100
-#define MV64360_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200
-#define MV64360_PCI_ACC_CNTL_MBURST_MASK 0x00000300
-#define MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000
-#define MV64360_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400
-#define MV64360_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800
-#define MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00
-#define MV64360_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00
-
-#define MV64360_PCI_ACC_CNTL_ALL_BITS (MV64360_PCI_ACC_CNTL_ENABLE | \
- MV64360_PCI_ACC_CNTL_REQ64 | \
- MV64360_PCI_ACC_CNTL_SNOOP_MASK | \
- MV64360_PCI_ACC_CNTL_ACCPROT | \
- MV64360_PCI_ACC_CNTL_WRPROT | \
- MV64360_PCI_ACC_CNTL_SWAP_MASK | \
- MV64360_PCI_ACC_CNTL_MBURST_MASK | \
- MV64360_PCI_ACC_CNTL_RDSIZE_MASK)
-
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO 0x1e00
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI 0x1e04
-#define MV64x60_PCI0_ACC_CNTL_0_SIZE 0x1e08
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO 0x1e10
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI 0x1e14
-#define MV64x60_PCI0_ACC_CNTL_1_SIZE 0x1e18
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO 0x1e20
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI 0x1e24
-#define MV64x60_PCI0_ACC_CNTL_2_SIZE 0x1e28
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO 0x1e30
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI 0x1e34
-#define MV64x60_PCI0_ACC_CNTL_3_SIZE 0x1e38
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO 0x1e40
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI 0x1e44
-#define MV64x60_PCI0_ACC_CNTL_4_SIZE 0x1e48
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO 0x1e50
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI 0x1e54
-#define MV64x60_PCI0_ACC_CNTL_5_SIZE 0x1e58
-
-#define GT64260_PCI0_ACC_CNTL_6_BASE_LO 0x1e60
-#define GT64260_PCI0_ACC_CNTL_6_BASE_HI 0x1e64
-#define GT64260_PCI0_ACC_CNTL_6_SIZE 0x1e68
-#define GT64260_PCI0_ACC_CNTL_7_BASE_LO 0x1e70
-#define GT64260_PCI0_ACC_CNTL_7_BASE_HI 0x1e74
-#define GT64260_PCI0_ACC_CNTL_7_SIZE 0x1e78
-
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO 0x1e80
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI 0x1e84
-#define MV64x60_PCI1_ACC_CNTL_0_SIZE 0x1e88
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO 0x1e90
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI 0x1e94
-#define MV64x60_PCI1_ACC_CNTL_1_SIZE 0x1e98
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO 0x1ea0
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI 0x1ea4
-#define MV64x60_PCI1_ACC_CNTL_2_SIZE 0x1ea8
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO 0x1eb0
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI 0x1eb4
-#define MV64x60_PCI1_ACC_CNTL_3_SIZE 0x1eb8
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO 0x1ec0
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI 0x1ec4
-#define MV64x60_PCI1_ACC_CNTL_4_SIZE 0x1ec8
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO 0x1ed0
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI 0x1ed4
-#define MV64x60_PCI1_ACC_CNTL_5_SIZE 0x1ed8
-
-#define GT64260_PCI1_ACC_CNTL_6_BASE_LO 0x1ee0
-#define GT64260_PCI1_ACC_CNTL_6_BASE_HI 0x1ee4
-#define GT64260_PCI1_ACC_CNTL_6_SIZE 0x1ee8
-#define GT64260_PCI1_ACC_CNTL_7_BASE_LO 0x1ef0
-#define GT64260_PCI1_ACC_CNTL_7_BASE_HI 0x1ef4
-#define GT64260_PCI1_ACC_CNTL_7_SIZE 0x1ef8
-
-/* PCI Snoop Control Registers (64260 only) */
-#define GT64260_PCI_SNOOP_NONE 0x00000000
-#define GT64260_PCI_SNOOP_WT 0x00001000
-#define GT64260_PCI_SNOOP_WB 0x00002000
-
-#define GT64260_PCI0_SNOOP_0_BASE_LO 0x1f00
-#define GT64260_PCI0_SNOOP_0_BASE_HI 0x1f04
-#define GT64260_PCI0_SNOOP_0_SIZE 0x1f08
-#define GT64260_PCI0_SNOOP_1_BASE_LO 0x1f10
-#define GT64260_PCI0_SNOOP_1_BASE_HI 0x1f14
-#define GT64260_PCI0_SNOOP_1_SIZE 0x1f18
-#define GT64260_PCI0_SNOOP_2_BASE_LO 0x1f20
-#define GT64260_PCI0_SNOOP_2_BASE_HI 0x1f24
-#define GT64260_PCI0_SNOOP_2_SIZE 0x1f28
-#define GT64260_PCI0_SNOOP_3_BASE_LO 0x1f30
-#define GT64260_PCI0_SNOOP_3_BASE_HI 0x1f34
-#define GT64260_PCI0_SNOOP_3_SIZE 0x1f38
-
-#define GT64260_PCI1_SNOOP_0_BASE_LO 0x1f80
-#define GT64260_PCI1_SNOOP_0_BASE_HI 0x1f84
-#define GT64260_PCI1_SNOOP_0_SIZE 0x1f88
-#define GT64260_PCI1_SNOOP_1_BASE_LO 0x1f90
-#define GT64260_PCI1_SNOOP_1_BASE_HI 0x1f94
-#define GT64260_PCI1_SNOOP_1_SIZE 0x1f98
-#define GT64260_PCI1_SNOOP_2_BASE_LO 0x1fa0
-#define GT64260_PCI1_SNOOP_2_BASE_HI 0x1fa4
-#define GT64260_PCI1_SNOOP_2_SIZE 0x1fa8
-#define GT64260_PCI1_SNOOP_3_BASE_LO 0x1fb0
-#define GT64260_PCI1_SNOOP_3_BASE_HI 0x1fb4
-#define GT64260_PCI1_SNOOP_3_SIZE 0x1fb8
-
-/* PCI Error Report Registers */
-#define MV64x60_PCI0_ERR_SERR_MASK 0x0c28
-#define MV64x60_PCI0_ERR_ADDR_LO 0x1d40
-#define MV64x60_PCI0_ERR_ADDR_HI 0x1d44
-#define MV64x60_PCI0_ERR_DATA_LO 0x1d48
-#define MV64x60_PCI0_ERR_DATA_HI 0x1d4c
-#define MV64x60_PCI0_ERR_CMD 0x1d50
-#define MV64x60_PCI0_ERR_CAUSE 0x1d58
-#define MV64x60_PCI0_ERR_MASK 0x1d5c
-
-#define MV64x60_PCI1_ERR_SERR_MASK 0x0ca8
-#define MV64x60_PCI1_ERR_ADDR_LO 0x1dc0
-#define MV64x60_PCI1_ERR_ADDR_HI 0x1dc4
-#define MV64x60_PCI1_ERR_DATA_LO 0x1dc8
-#define MV64x60_PCI1_ERR_DATA_HI 0x1dcc
-#define MV64x60_PCI1_ERR_CMD 0x1dd0
-#define MV64x60_PCI1_ERR_CAUSE 0x1dd8
-#define MV64x60_PCI1_ERR_MASK 0x1ddc
-
-/* PCI Slave Address Decoding Registers */
-#define MV64x60_PCI0_MEM_0_SIZE 0x0c08
-#define MV64x60_PCI0_MEM_1_SIZE 0x0d08
-#define MV64x60_PCI0_MEM_2_SIZE 0x0c0c
-#define MV64x60_PCI0_MEM_3_SIZE 0x0d0c
-#define MV64x60_PCI1_MEM_0_SIZE 0x0c88
-#define MV64x60_PCI1_MEM_1_SIZE 0x0d88
-#define MV64x60_PCI1_MEM_2_SIZE 0x0c8c
-#define MV64x60_PCI1_MEM_3_SIZE 0x0d8c
-
-#define MV64x60_PCI0_BAR_ENABLE 0x0c3c
-#define MV64x60_PCI1_BAR_ENABLE 0x0cbc
-
-#define MV64x60_PCI0_PCI_DECODE_CNTL 0x0d3c
-#define MV64x60_PCI1_PCI_DECODE_CNTL 0x0dbc
-
-#define MV64x60_PCI0_SLAVE_MEM_0_REMAP 0x0c48
-#define MV64x60_PCI0_SLAVE_MEM_1_REMAP 0x0d48
-#define MV64x60_PCI0_SLAVE_MEM_2_REMAP 0x0c4c
-#define MV64x60_PCI0_SLAVE_MEM_3_REMAP 0x0d4c
-#define MV64x60_PCI0_SLAVE_DEV_0_REMAP 0x0c50
-#define MV64x60_PCI0_SLAVE_DEV_1_REMAP 0x0d50
-#define MV64x60_PCI0_SLAVE_DEV_2_REMAP 0x0d58
-#define MV64x60_PCI0_SLAVE_DEV_3_REMAP 0x0c54
-#define MV64x60_PCI0_SLAVE_BOOT_REMAP 0x0d54
-#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c
-#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60
-#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64
-#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68
-#define MV64x60_PCI0_SLAVE_P2P_IO_REMAP 0x0d6c
-#define MV64x60_PCI0_SLAVE_CPU_REMAP 0x0d70
-
-#define MV64x60_PCI1_SLAVE_MEM_0_REMAP 0x0cc8
-#define MV64x60_PCI1_SLAVE_MEM_1_REMAP 0x0dc8
-#define MV64x60_PCI1_SLAVE_MEM_2_REMAP 0x0ccc
-#define MV64x60_PCI1_SLAVE_MEM_3_REMAP 0x0dcc
-#define MV64x60_PCI1_SLAVE_DEV_0_REMAP 0x0cd0
-#define MV64x60_PCI1_SLAVE_DEV_1_REMAP 0x0dd0
-#define MV64x60_PCI1_SLAVE_DEV_2_REMAP 0x0dd8
-#define MV64x60_PCI1_SLAVE_DEV_3_REMAP 0x0cd4
-#define MV64x60_PCI1_SLAVE_BOOT_REMAP 0x0dd4
-#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc
-#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0
-#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4
-#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8
-#define MV64x60_PCI1_SLAVE_P2P_IO_REMAP 0x0dec
-#define MV64x60_PCI1_SLAVE_CPU_REMAP 0x0df0
-
-#define MV64360_PCICFG_CPCI_HOTSWAP 0x68
-
-/*
- *****************************************************************************
- *
- * ENET Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* ENET Controller Window Registers (6 windows) */
-#define MV64360_ENET2MEM_WINDOWS 6
-
-#define MV64360_ENET2MEM_0_BASE 0x2200
-#define MV64360_ENET2MEM_0_SIZE 0x2204
-#define MV64360_ENET2MEM_1_BASE 0x2208
-#define MV64360_ENET2MEM_1_SIZE 0x220c
-#define MV64360_ENET2MEM_2_BASE 0x2210
-#define MV64360_ENET2MEM_2_SIZE 0x2214
-#define MV64360_ENET2MEM_3_BASE 0x2218
-#define MV64360_ENET2MEM_3_SIZE 0x221c
-#define MV64360_ENET2MEM_4_BASE 0x2220
-#define MV64360_ENET2MEM_4_SIZE 0x2224
-#define MV64360_ENET2MEM_5_BASE 0x2228
-#define MV64360_ENET2MEM_5_SIZE 0x222c
-
-#define MV64360_ENET2MEM_SNOOP_NONE 0x00000000
-#define MV64360_ENET2MEM_SNOOP_WT 0x00001000
-#define MV64360_ENET2MEM_SNOOP_WB 0x00002000
-
-#define MV64360_ENET2MEM_BAR_ENABLE 0x2290
-
-#define MV64360_ENET2MEM_ACC_PROT_0 0x2294
-#define MV64360_ENET2MEM_ACC_PROT_1 0x2298
-#define MV64360_ENET2MEM_ACC_PROT_2 0x229c
-
-/*
- *****************************************************************************
- *
- * MPSC Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* MPSC Controller Window Registers (4 windows) */
-#define MV64360_MPSC2MEM_WINDOWS 4
-
-#define MV64360_MPSC2MEM_0_BASE 0xf200
-#define MV64360_MPSC2MEM_0_SIZE 0xf204
-#define MV64360_MPSC2MEM_1_BASE 0xf208
-#define MV64360_MPSC2MEM_1_SIZE 0xf20c
-#define MV64360_MPSC2MEM_2_BASE 0xf210
-#define MV64360_MPSC2MEM_2_SIZE 0xf214
-#define MV64360_MPSC2MEM_3_BASE 0xf218
-#define MV64360_MPSC2MEM_3_SIZE 0xf21c
-
-#define MV64360_MPSC_0_REMAP 0xf240
-#define MV64360_MPSC_1_REMAP 0xf244
-
-#define MV64360_MPSC2MEM_SNOOP_NONE 0x00000000
-#define MV64360_MPSC2MEM_SNOOP_WT 0x00001000
-#define MV64360_MPSC2MEM_SNOOP_WB 0x00002000
-
-#define MV64360_MPSC2MEM_BAR_ENABLE 0xf250
-
-#define MV64360_MPSC2MEM_ACC_PROT_0 0xf254
-#define MV64360_MPSC2MEM_ACC_PROT_1 0xf258
-
-#define MV64360_MPSC2REGS_BASE 0xf25c
-
-/*
- *****************************************************************************
- *
- * Timer/Counter Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_TIMR_CNTR_0 0x0850
-#define MV64x60_TIMR_CNTR_1 0x0854
-#define MV64x60_TIMR_CNTR_2 0x0858
-#define MV64x60_TIMR_CNTR_3 0x085c
-#define MV64x60_TIMR_CNTR_0_3_CNTL 0x0864
-#define MV64x60_TIMR_CNTR_0_3_INTR_CAUSE 0x0868
-#define MV64x60_TIMR_CNTR_0_3_INTR_MASK 0x086c
-
-#define GT64260_TIMR_CNTR_4 0x0950
-#define GT64260_TIMR_CNTR_5 0x0954
-#define GT64260_TIMR_CNTR_6 0x0958
-#define GT64260_TIMR_CNTR_7 0x095c
-#define GT64260_TIMR_CNTR_4_7_CNTL 0x0964
-#define GT64260_TIMR_CNTR_4_7_INTR_CAUSE 0x0968
-#define GT64260_TIMR_CNTR_4_7_INTR_MASK 0x096c
-
-/*
- *****************************************************************************
- *
- * Communications Controller
- *
- *****************************************************************************
- */
-
-#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320
-#define GT64260_SER_INIT_LAST_DATA 0xf324
-#define GT64260_SER_INIT_CONTROL 0xf328
-#define GT64260_SER_INIT_STATUS 0xf32c
-
-#define MV64x60_COMM_ARBITER_CNTL 0xf300
-#define MV64x60_COMM_CONFIG 0xb40c
-#define MV64x60_COMM_XBAR_TO 0xf304
-#define MV64x60_COMM_INTR_CAUSE 0xf310
-#define MV64x60_COMM_INTR_MASK 0xf314
-#define MV64x60_COMM_ERR_ADDR 0xf318
-
-#define MV64360_COMM_ARBITER_CNTL 0xf300
-
-/*
- *****************************************************************************
- *
- * IDMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* IDMA Controller Window Registers (8 windows) */
-#define MV64360_IDMA2MEM_WINDOWS 8
-
-#define MV64360_IDMA2MEM_0_BASE 0x0a00
-#define MV64360_IDMA2MEM_0_SIZE 0x0a04
-#define MV64360_IDMA2MEM_1_BASE 0x0a08
-#define MV64360_IDMA2MEM_1_SIZE 0x0a0c
-#define MV64360_IDMA2MEM_2_BASE 0x0a10
-#define MV64360_IDMA2MEM_2_SIZE 0x0a14
-#define MV64360_IDMA2MEM_3_BASE 0x0a18
-#define MV64360_IDMA2MEM_3_SIZE 0x0a1c
-#define MV64360_IDMA2MEM_4_BASE 0x0a20
-#define MV64360_IDMA2MEM_4_SIZE 0x0a24
-#define MV64360_IDMA2MEM_5_BASE 0x0a28
-#define MV64360_IDMA2MEM_5_SIZE 0x0a2c
-#define MV64360_IDMA2MEM_6_BASE 0x0a30
-#define MV64360_IDMA2MEM_6_SIZE 0x0a34
-#define MV64360_IDMA2MEM_7_BASE 0x0a38
-#define MV64360_IDMA2MEM_7_SIZE 0x0a3c
-
-#define MV64360_IDMA2MEM_SNOOP_NONE 0x00000000
-#define MV64360_IDMA2MEM_SNOOP_WT 0x00001000
-#define MV64360_IDMA2MEM_SNOOP_WB 0x00002000
-
-#define MV64360_IDMA2MEM_BAR_ENABLE 0x0a80
-
-#define MV64360_IDMA2MEM_ACC_PROT_0 0x0a70
-#define MV64360_IDMA2MEM_ACC_PROT_1 0x0a74
-#define MV64360_IDMA2MEM_ACC_PROT_2 0x0a78
-#define MV64360_IDMA2MEM_ACC_PROT_3 0x0a7c
-
-#define MV64x60_IDMA_0_OFFSET 0x0800
-#define MV64x60_IDMA_1_OFFSET 0x0804
-#define MV64x60_IDMA_2_OFFSET 0x0808
-#define MV64x60_IDMA_3_OFFSET 0x080c
-#define MV64x60_IDMA_4_OFFSET 0x0900
-#define MV64x60_IDMA_5_OFFSET 0x0904
-#define MV64x60_IDMA_6_OFFSET 0x0908
-#define MV64x60_IDMA_7_OFFSET 0x090c
-
-#define MV64x60_IDMA_BYTE_COUNT (0x0800 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_SRC_ADDR (0x0810 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_DST_ADDR (0x0820 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_NEXT_DESC (0x0830 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_CUR_DESC (0x0870 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_SRC_PCI_ADDR_HI (0x0890 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_DST_PCI_ADDR_HI (0x08a0 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_NEXT_DESC_PCI_ADDR_HI (0x08b0 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_CONTROL_LO (0x0840 - MV64x60_IDMA_0_OFFSET)
-#define MV64x60_IDMA_CONTROL_HI (0x0880 - MV64x60_IDMA_0_OFFSET)
-
-#define MV64x60_IDMA_0_3_ARBITER_CNTL 0x0860
-#define MV64x60_IDMA_4_7_ARBITER_CNTL 0x0960
-
-#define MV64x60_IDMA_0_3_XBAR_TO 0x08d0
-#define MV64x60_IDMA_4_7_XBAR_TO 0x09d0
-
-#define MV64x60_IDMA_0_3_INTR_CAUSE 0x08c0
-#define MV64x60_IDMA_0_3_INTR_MASK 0x08c4
-#define MV64x60_IDMA_0_3_ERROR_ADDR 0x08c8
-#define MV64x60_IDMA_0_3_ERROR_SELECT 0x08cc
-#define MV64x60_IDMA_4_7_INTR_CAUSE 0x09c0
-#define MV64x60_IDMA_4_7_INTR_MASK 0x09c4
-#define MV64x60_IDMA_4_7_ERROR_ADDR 0x09c8
-#define MV64x60_IDMA_4_7_ERROR_SELECT 0x09cc
-
-/*
- *****************************************************************************
- *
- * Watchdog Timer Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_WDT_WDC 0xb410
-#define MV64x60_WDT_WDV 0xb414
-
-
-/*
- *****************************************************************************
- *
- * General Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_GPP_IO_CNTL 0xf100
-#define MV64x60_GPP_LEVEL_CNTL 0xf110
-#define MV64x60_GPP_VALUE 0xf104
-#define MV64x60_GPP_INTR_CAUSE 0xf108
-#define MV64x60_GPP_INTR_MASK 0xf10c
-#define MV64x60_GPP_VALUE_SET 0xf118
-#define MV64x60_GPP_VALUE_CLR 0xf11c
-
-
-/*
- *****************************************************************************
- *
- * Multi-Purpose Pins Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define MV64x60_MPP_CNTL_0 0xf000
-#define MV64x60_MPP_CNTL_1 0xf004
-#define MV64x60_MPP_CNTL_2 0xf008
-#define MV64x60_MPP_CNTL_3 0xf00c
-#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010
-
-#define MV64x60_ETH_BAR_GAP 0x8
-#define MV64x60_ETH_SIZE_REG_GAP 0x8
-#define MV64x60_ETH_HIGH_ADDR_REMAP_REG_GAP 0x4
-#define MV64x60_ETH_PORT_ACCESS_CTRL_GAP 0x4
-
-#define MV64x60_EBAR_ATTR_DRAM_CS0 0x00000E00
-#define MV64x60_EBAR_ATTR_DRAM_CS1 0x00000D00
-#define MV64x60_EBAR_ATTR_DRAM_CS2 0x00000B00
-#define MV64x60_EBAR_ATTR_DRAM_CS3 0x00000700
-
-#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000
-#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100
-#define MV64x60_EBAR_ATTR_CBS_SRAM 0x00000000
-#define MV64x60_EBAR_ATTR_CBS_CPU_BUS 0x00000800
-
-
-/*
- *****************************************************************************
- *
- * Interrupt Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define GT64260_IC_OFFSET 0x0c18
-
-#define GT64260_IC_MAIN_CAUSE_LO 0x0c18
-#define GT64260_IC_MAIN_CAUSE_HI 0x0c68
-#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c
-#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c
-#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70
-#define GT64260_IC_PCI0_INTR_MASK_LO 0x0c24
-#define GT64260_IC_PCI0_INTR_MASK_HI 0x0c64
-#define GT64260_IC_PCI0_SELECT_CAUSE 0x0c74
-#define GT64260_IC_PCI1_INTR_MASK_LO 0x0ca4
-#define GT64260_IC_PCI1_INTR_MASK_HI 0x0ce4
-#define GT64260_IC_PCI1_SELECT_CAUSE 0x0cf4
-#define GT64260_IC_CPU_INT_0_MASK 0x0e60
-#define GT64260_IC_CPU_INT_1_MASK 0x0e64
-#define GT64260_IC_CPU_INT_2_MASK 0x0e68
-#define GT64260_IC_CPU_INT_3_MASK 0x0e6c
-
-#define MV64360_IC_OFFSET 0x0000
-
-#define MV64360_IC_MAIN_CAUSE_LO 0x0004
-#define MV64360_IC_MAIN_CAUSE_HI 0x000c
-#define MV64360_IC_CPU0_INTR_MASK_LO 0x0014
-#define MV64360_IC_CPU0_INTR_MASK_HI 0x001c
-#define MV64360_IC_CPU0_SELECT_CAUSE 0x0024
-#define MV64360_IC_CPU1_INTR_MASK_LO 0x0034
-#define MV64360_IC_CPU1_INTR_MASK_HI 0x003c
-#define MV64360_IC_CPU1_SELECT_CAUSE 0x0044
-#define MV64360_IC_INT0_MASK_LO 0x0054
-#define MV64360_IC_INT0_MASK_HI 0x005c
-#define MV64360_IC_INT0_SELECT_CAUSE 0x0064
-#define MV64360_IC_INT1_MASK_LO 0x0074
-#define MV64360_IC_INT1_MASK_HI 0x007c
-#define MV64360_IC_INT1_SELECT_CAUSE 0x0084
-
-#endif /* __ASMPPC_MV64x60_DEFS_H */
diff --git a/include/asm-ppc/ocp.h b/include/asm-ppc/ocp.h
deleted file mode 100644
index 3909a2eec286..000000000000
--- a/include/asm-ppc/ocp.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * ocp.h
- *
- * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- * Mipsys - France
- *
- * Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- * Additional support and port to 2.6 LDM/sysfs by
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * TODO: - Add get/put interface & fixup locking to provide same API for
- * 2.4 and 2.5
- * - Rework PM callbacks
- */
-
-#ifdef __KERNEL__
-#ifndef __OCP_H__
-#define __OCP_H__
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/rwsem.h>
-
-#include <asm/mmu.h>
-#include <asm/ocp_ids.h>
-
-#ifdef CONFIG_PPC_OCP
-
-#define OCP_MAX_IRQS 7
-#define MAX_EMACS 4
-#define OCP_IRQ_NA -1 /* used when ocp device does not have an irq */
-#define OCP_IRQ_MUL -2 /* used for ocp devices with multiply irqs */
-#define OCP_NULL_TYPE -1 /* used to mark end of list */
-#define OCP_CPM_NA 0 /* No Clock or Power Management avaliable */
-#define OCP_PADDR_NA 0 /* No MMIO registers */
-
-#define OCP_ANY_ID (~0)
-#define OCP_ANY_INDEX -1
-
-extern struct list_head ocp_devices;
-extern struct rw_semaphore ocp_devices_sem;
-
-struct ocp_device_id {
- unsigned int vendor, function; /* Vendor and function ID or OCP_ANY_ID */
- unsigned long driver_data; /* Data private to the driver */
-};
-
-
-/*
- * Static definition of an OCP device.
- *
- * @vendor: Vendor code. It is _STRONGLY_ discouraged to use
- * the vendor code as a way to match a unique device,
- * though I kept that possibility open, you should
- * really define different function codes for different
- * device types
- * @function: This is the function code for this device.
- * @index: This index is used for mapping the Nth function of a
- * given core. This is typically used for cross-driver
- * matching, like looking for a given MAL or ZMII from
- * an EMAC or for getting to the proper set of DCRs.
- * Indices are no longer magically calculated based on
- * structure ordering, they have to be actually coded
- * into the ocp_def to avoid any possible confusion
- * I _STRONGLY_ (again ? wow !) encourage anybody relying
- * on index mapping to encode the "target" index in an
- * associated structure pointed to by "additions", see
- * how it's done for the EMAC driver.
- * @paddr: Device physical address (may not mean anything...)
- * @irq: Interrupt line for this device (TODO: think about making
- * an array with this)
- * @pm: Currently, contains the bitmask in CPMFR DCR for the device
- * @additions: Optionally points to a function specific structure
- * providing additional informations for a given device
- * instance. It's currently used by the EMAC driver for MAL
- * channel & ZMII port mapping among others.
- * @show: Optionally points to a function specific structure
- * providing a sysfs show routine for additions fields.
- */
-struct ocp_def {
- unsigned int vendor;
- unsigned int function;
- int index;
- phys_addr_t paddr;
- int irq;
- unsigned long pm;
- void *additions;
- void (*show)(struct device *);
-};
-
-
-/* Struct for a given device instance */
-struct ocp_device {
- struct list_head link;
- char name[80]; /* device name */
- struct ocp_def *def; /* device definition */
- void *drvdata; /* driver data for this device */
- struct ocp_driver *driver;
- u32 current_state; /* Current operating state. In ACPI-speak,
- this is D0-D3, D0 being fully functional,
- and D3 being off. */
- struct device dev;
-};
-
-struct ocp_driver {
- struct list_head node;
- char *name;
- const struct ocp_device_id *id_table; /* NULL if wants all devices */
- int (*probe) (struct ocp_device *dev); /* New device inserted */
- void (*remove) (struct ocp_device *dev); /* Device removed (NULL if not a hot-plug capable driver) */
- int (*suspend) (struct ocp_device *dev, pm_message_t state); /* Device suspended */
- int (*resume) (struct ocp_device *dev); /* Device woken up */
- struct device_driver driver;
-};
-
-#define to_ocp_dev(n) container_of(n, struct ocp_device, dev)
-#define to_ocp_drv(n) container_of(n, struct ocp_driver, driver)
-
-/* Similar to the helpers above, these manipulate per-ocp_dev
- * driver-specific data. Currently stored as ocp_dev::ocpdev,
- * a void pointer, but it is not present on older kernels.
- */
-static inline void *
-ocp_get_drvdata(struct ocp_device *pdev)
-{
- return pdev->drvdata;
-}
-
-static inline void
-ocp_set_drvdata(struct ocp_device *pdev, void *data)
-{
- pdev->drvdata = data;
-}
-
-#if defined (CONFIG_PM)
-/*
- * This is right for the IBM 405 and 440 but will need to be
- * generalized if the OCP stuff gets used on other processors.
- */
-static inline void
-ocp_force_power_off(struct ocp_device *odev)
-{
- mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->def->pm);
-}
-
-static inline void
-ocp_force_power_on(struct ocp_device *odev)
-{
- mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->def->pm);
-}
-#else
-#define ocp_force_power_off(x) (void)(x)
-#define ocp_force_power_on(x) (void)(x)
-#endif
-
-/* Register/Unregister an OCP driver */
-extern int ocp_register_driver(struct ocp_driver *drv);
-extern void ocp_unregister_driver(struct ocp_driver *drv);
-
-/* Build list of devices */
-extern int ocp_early_init(void) __init;
-
-/* Find a device by index */
-extern struct ocp_device *ocp_find_device(unsigned int vendor, unsigned int function, int index);
-
-/* Get a def by index */
-extern struct ocp_def *ocp_get_one_device(unsigned int vendor, unsigned int function, int index);
-
-/* Add a device by index */
-extern int ocp_add_one_device(struct ocp_def *def);
-
-/* Remove a device by index */
-extern int ocp_remove_one_device(unsigned int vendor, unsigned int function, int index);
-
-/* Iterate over devices and execute a routine */
-extern void ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg);
-
-/* Sysfs support */
-#define OCP_SYSFS_ADDTL(type, format, name, field) \
-static ssize_t \
-show_##name##_##field(struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct ocp_device *odev = to_ocp_dev(dev); \
- type *add = odev->def->additions; \
- \
- return sprintf(buf, format, add->field); \
-} \
-static DEVICE_ATTR(name##_##field, S_IRUGO, show_##name##_##field, NULL);
-
-#ifdef CONFIG_IBM_OCP
-#include <asm/ibm_ocp.h>
-#endif
-
-#endif /* CONFIG_PPC_OCP */
-#endif /* __OCP_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ocp_ids.h b/include/asm-ppc/ocp_ids.h
deleted file mode 100644
index 8ae4b311a37c..000000000000
--- a/include/asm-ppc/ocp_ids.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * ocp_ids.h
- *
- * OCP device ids based on the ideas from PCI
- *
- * The numbers below are almost completely arbitrary, and in fact
- * strings might work better. -- paulus
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * Vender device
- * [xxxx] [xxxx]
- *
- * Keep in order, please
- */
-
-/* Vendor IDs 0x0001 - 0xFFFF copied from pci_ids.h */
-
-#define OCP_VENDOR_INVALID 0x0000
-#define OCP_VENDOR_ARM 0x0004
-#define OCP_VENDOR_FREESCALE 0x1057
-#define OCP_VENDOR_IBM 0x1014
-#define OCP_VENDOR_MOTOROLA OCP_VENDOR_FREESCALE
-#define OCP_VENDOR_XILINX 0x10ee
-#define OCP_VENDOR_UNKNOWN 0xFFFF
-
-/* device identification */
-
-/* define type */
-#define OCP_FUNC_INVALID 0x0000
-
-/* system 0x0001 - 0x001F */
-
-/* Timers 0x0020 - 0x002F */
-
-/* Serial 0x0030 - 0x006F*/
-#define OCP_FUNC_16550 0x0031
-#define OCP_FUNC_IIC 0x0032
-#define OCP_FUNC_USB 0x0033
-#define OCP_FUNC_PSC_UART 0x0034
-
-/* Memory devices 0x0090 - 0x009F */
-#define OCP_FUNC_MAL 0x0090
-#define OCP_FUNC_DMA 0x0091
-
-/* Display 0x00A0 - 0x00AF */
-
-/* Sound 0x00B0 - 0x00BF */
-
-/* Mass Storage 0x00C0 - 0xxCF */
-#define OCP_FUNC_IDE 0x00C0
-
-/* Misc 0x00D0 - 0x00DF*/
-#define OCP_FUNC_GPIO 0x00D0
-#define OCP_FUNC_ZMII 0x00D1
-#define OCP_FUNC_PERFMON 0x00D2 /* Performance Monitor */
-#define OCP_FUNC_RGMII 0x00D3
-#define OCP_FUNC_TAH 0x00D4
-#define OCP_FUNC_SEC2 0x00D5 /* Crypto/Security 2.0 */
-
-/* Network 0x0200 - 0x02FF */
-#define OCP_FUNC_EMAC 0x0200
-#define OCP_FUNC_GFAR 0x0201 /* TSEC & FEC */
-
-/* Bridge devices 0xE00 - 0xEFF */
-#define OCP_FUNC_OPB 0x0E00
-
-#define OCP_FUNC_UNKNOWN 0xFFFF
diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h
deleted file mode 100644
index 778d5726212c..000000000000
--- a/include/asm-ppc/open_pic.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * include/asm-ppc/open_pic.h -- OpenPIC Interrupt Handling
- *
- * Copyright (C) 1997 Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- */
-
-#ifndef _PPC_KERNEL_OPEN_PIC_H
-#define _PPC_KERNEL_OPEN_PIC_H
-
-#include <linux/irq.h>
-
-#define OPENPIC_SIZE 0x40000
-
-/*
- * Non-offset'ed vector numbers
- */
-
-#define OPENPIC_VEC_TIMER 110 /* and up */
-#define OPENPIC_VEC_IPI 118 /* and up */
-#define OPENPIC_VEC_SPURIOUS 255
-
-/* Priorities */
-#define OPENPIC_PRIORITY_IPI_BASE 10
-#define OPENPIC_PRIORITY_DEFAULT 4
-#define OPENPIC_PRIORITY_NMI 9
-
-/* OpenPIC IRQ controller structure */
-extern struct hw_interrupt_type open_pic;
-
-/* OpenPIC IPI controller structure */
-#ifdef CONFIG_SMP
-extern struct hw_interrupt_type open_pic_ipi;
-#endif /* CONFIG_SMP */
-
-extern u_int OpenPIC_NumInitSenses;
-extern u_char *OpenPIC_InitSenses;
-extern void __iomem * OpenPIC_Addr;
-extern int epic_serial_mode;
-
-/* Exported functions */
-extern void openpic_set_sources(int first_irq, int num_irqs, void __iomem *isr);
-extern void openpic_init(int linux_irq_offset);
-extern void openpic_init_nmi_irq(u_int irq);
-extern void openpic_set_irq_priority(u_int irq, u_int pri);
-extern void openpic_hookup_cascade(u_int irq, char *name,
- int (*cascade_fn)(void));
-extern u_int openpic_irq(void);
-extern void openpic_eoi(void);
-extern void openpic_request_IPIs(void);
-extern void do_openpic_setup_cpu(void);
-extern int openpic_get_irq(void);
-extern void openpic_reset_processor_phys(u_int cpumask);
-extern void openpic_setup_ISU(int isu_num, unsigned long addr);
-extern void openpic_cause_IPI(u_int ipi, cpumask_t cpumask);
-extern void smp_openpic_message_pass(int target, int msg);
-extern void openpic_set_k2_cascade(int irq);
-extern void openpic_set_priority(u_int pri);
-extern u_int openpic_get_priority(void);
-
-extern inline int openpic_to_irq(int irq)
-{
- /* IRQ 0 usually means 'disabled'.. don't mess with it
- * exceptions to this (sandpoint maybe?)
- * shouldn't use openpic_to_irq
- */
- if (irq != 0){
- return irq += NUM_8259_INTERRUPTS;
- } else {
- return 0;
- }
-}
-/* Support for second openpic on G5 macs */
-
-// FIXME: To be replaced by sane cascaded controller management */
-
-#define PMAC_OPENPIC2_OFFSET 128
-
-#define OPENPIC2_VEC_TIMER 110 /* and up */
-#define OPENPIC2_VEC_IPI 118 /* and up */
-#define OPENPIC2_VEC_SPURIOUS 127
-
-
-extern void* OpenPIC2_Addr;
-
-/* Exported functions */
-extern void openpic2_set_sources(int first_irq, int num_irqs, void *isr);
-extern void openpic2_init(int linux_irq_offset);
-extern void openpic2_init_nmi_irq(u_int irq);
-extern u_int openpic2_irq(void);
-extern void openpic2_eoi(void);
-extern int openpic2_get_irq(void);
-extern void openpic2_setup_ISU(int isu_num, unsigned long addr);
-#endif /* _PPC_KERNEL_OPEN_PIC_H */
diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h
deleted file mode 100644
index 37e4756b6b2d..000000000000
--- a/include/asm-ppc/page.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef _PPC_PAGE_H
-#define _PPC_PAGE_H
-
-#include <asm/asm-compat.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
-
-/*
- * Subtle: this is an int (not an unsigned long) and so it
- * gets extended to 64 bits the way want (i.e. with 1s). -- paulus
- */
-#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
-
-#ifdef __KERNEL__
-
-/* This must match what is in arch/ppc/Makefile */
-#define PAGE_OFFSET CONFIG_KERNEL_START
-#define KERNELBASE PAGE_OFFSET
-#define is_kernel_addr(x) ((x) >= PAGE_OFFSET)
-
-#ifndef __ASSEMBLY__
-
-/*
- * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
- * physical addressing. For now this just the IBM PPC440.
- */
-#ifdef CONFIG_PTE_64BIT
-typedef unsigned long long pte_basic_t;
-#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */
-#define PTE_FMT "%16Lx"
-#else
-typedef unsigned long pte_basic_t;
-#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
-#define PTE_FMT "%.8lx"
-#endif
-
-/* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1)))
-
-/* align addr on a size boundary - adjust address up if needed */
-#define _ALIGN(addr,size) _ALIGN_UP(addr,size)
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE)
-
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { pte_basic_t pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((x).pmd)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef pte_basic_t pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x) (x)
-#define pmd_val(x) (x)
-#define pgd_val(x) (x)
-#define pgprot_val(x) (x)
-
-#define __pte(x) (x)
-#define __pmd(x) (x)
-#define __pgd(x) (x)
-#define __pgprot(x) (x)
-
-#endif
-
-struct page;
-extern void clear_pages(void *page, int order);
-static inline void clear_page(void *page) { clear_pages(page, 0); }
-extern void copy_page(void *to, void *from);
-extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
-extern void copy_user_page(void *to, void *from, unsigned long vaddr,
- struct page *pg);
-
-#define PPC_MEMSTART 0
-#define PPC_MEMOFFSET PAGE_OFFSET
-
-#define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET)
-#define ___va(paddr) ((paddr)+PPC_MEMOFFSET)
-
-extern int page_is_ram(unsigned long pfn);
-
-#define __pa(x) ___pa((unsigned long)(x))
-#define __va(x) ((void *)(___va((unsigned long)(x))))
-
-#define ARCH_PFN_OFFSET 0
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT)
-
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-/* Pure 2^n version of get_order */
-extern __inline__ int get_order(unsigned long size)
-{
- int lz;
-
- size = (size-1) >> PAGE_SHIFT;
- asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
- return 32 - lz;
-}
-
-typedef struct page *pgtable_t;
-
-#endif /* __ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
-#define __HAVE_ARCH_GATE_AREA 1
-
-#include <asm-generic/memory_model.h>
-#endif /* __KERNEL__ */
-#endif /* _PPC_PAGE_H */
diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h
deleted file mode 100644
index 81a2d0fdaf00..000000000000
--- a/include/asm-ppc/pc_serial.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/asm-ppc/pc_serial.h
- *
- * This is basically a copy of include/asm-i386/serial.h.
- * It is used on platforms which have an ISA bus and thus are likely
- * to have PC-style serial ports at the legacy I/O port addresses.
- * It also includes the definitions for the fourport, accent, boca
- * and hub6 multiport serial cards, although I have never heard of
- * anyone using any of those on a PPC platform. -- paulus
- */
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE 64
-#else
-#define RS_TABLE_SIZE 4
-#endif
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
- { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
- { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
deleted file mode 100644
index 4d35b844bc58..000000000000
--- a/include/asm-ppc/pci-bridge.h
+++ /dev/null
@@ -1,151 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _ASM_PCI_BRIDGE_H
-#define _ASM_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller* pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, resource_size_t start,
- resource_size_t end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller* pci_bus_to_hose(int bus);
-
-/* Get the PCI host controller for an OF device */
-extern struct pci_controller*
-pci_find_hose_for_OF_device(struct device_node* node);
-
-/* Fill up host controller resources from the OF node */
-extern void
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
- int index; /* PCI domain number */
- struct pci_controller *next;
- struct pci_bus *bus;
- void *arch_data;
- struct device *parent;
-
- int first_busno;
- int last_busno;
- int bus_offset;
-
- void __iomem *io_base_virt;
- resource_size_t io_base_phys;
-
- /* Some machines (PReP) have a non 1:1 mapping of
- * the PCI memory space in the CPU bus space
- */
- resource_size_t pci_mem_offset;
-
- struct pci_ops *ops;
- volatile unsigned int __iomem *cfg_addr;
- volatile void __iomem *cfg_data;
- /*
- * If set, indirect method will set the cfg_type bit as
- * needed to generate type 1 configuration transactions.
- */
- int set_cfg_type;
-
- /* Currently, we limit ourselves to 1 IO range and 3 mem
- * ranges since the common pci_bus structure can't handle more
- */
- struct resource io_resource;
- struct resource mem_resources[3];
- int mem_resource_count;
-
- /* Host bridge I/O and Memory space
- * Used for BAR placement algorithms
- */
- struct resource io_space;
- struct resource mem_space;
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
- return bus->sysdata;
-}
-
-/* These are used for config access before all the PCI probing
- has been done. */
-int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
- int where, u8 *val);
-int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
- int where, u16 *val);
-int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
- int where, u32 *val);
-int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
- int where, u8 val);
-int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
- int where, u16 val);
-int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
- int where, u32 val);
-
-extern void setup_indirect_pci_nomap(struct pci_controller* hose,
- void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller* hose,
- u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- * The following code swizzles for exactly one bridge. The routine
- * common_swizzle below handles multiple bridges. But there are a
- * some boards that don't follow the PCI spec's suggestion so we
- * break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
- unsigned char idsel)
-{
- return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP \
-({ long _ctl_ = -1; \
- if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
- _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
- _ctl_; })
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
- return (unsigned long)-1;
-}
-#endif
-
-#endif
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h
deleted file mode 100644
index d2442cd72a59..000000000000
--- a/include/asm-ppc/pci.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef __PPC_PCI_H
-#define __PPC_PCI_H
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <asm/scatterlist.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm-generic/pci-dma-compat.h>
-
-struct pci_dev;
-
-/* Values for the `which' argument to sys_pciconfig_iobase syscall. */
-#define IOBASE_BRIDGE_NUMBER 0
-#define IOBASE_MEMORY 1
-#define IOBASE_IO 2
-#define IOBASE_ISA_IO 3
-#define IOBASE_ISA_MEM 4
-
-/*
- * Set this to 1 if you want the kernel to re-assign all PCI
- * bus numbers
- */
-extern int pci_assign_all_buses;
-
-#define pcibios_assign_all_busses() (pci_assign_all_buses)
-#define pcibios_scan_all_fns(a, b) 0
-
-#define PCIBIOS_MIN_IO 0x1000
-#define PCIBIOS_MIN_MEM 0x10000000
-
-extern inline void pcibios_set_master(struct pci_dev *dev)
-{
- /* No special bus mastering setup handling */
-}
-
-extern inline void pcibios_penalize_isa_irq(int irq, int active)
-{
- /* We don't do dynamic PCI IRQ allocation */
-}
-
-extern unsigned long pci_resource_to_bus(struct pci_dev *pdev, struct resource *res);
-
-/*
- * The PCI bus bridge can translate addresses issued by the processor(s)
- * into a different address on the PCI bus. On 32-bit cpus, we assume
- * this mapping is 1-1, but on 64-bit systems it often isn't.
- *
- * Obsolete ! Drivers should now use pci_resource_to_bus
- */
-extern unsigned long phys_to_bus(unsigned long pa);
-extern unsigned long pci_phys_to_bus(unsigned long pa, int busnr);
-extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr);
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu()
- * and so on are not, so...
- */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
- dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
- __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME) \
- ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
- (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME) \
- ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
- (((PTR)->LEN_NAME) = (VAL))
-
-#else /* coherent */
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
- enum pci_dma_burst_strategy *strat,
- unsigned long *strategy_parameter)
-{
- *strat = PCI_DMA_BURST_INFINITY;
- *strategy_parameter = ~0UL;
-}
-#endif
-
-/* Return the index of the PCI controller for device PDEV. */
-#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
-
-/* Set the name of the bus as it appears in /proc/bus/pci */
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
- return 0;
-}
-
-/* Map a range of PCI memory or I/O space for a device into user space */
-int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
-
-/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
-#define HAVE_PCI_MMAP 1
-
-extern void
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
- struct resource *res);
-
-extern void
-pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
- struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
- struct resource *root = NULL;
-
- if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
-
- return root;
-}
-
-struct file;
-extern pgprot_t pci_phys_mem_access_prot(struct file *file,
- unsigned long pfn,
- unsigned long size,
- pgprot_t prot);
-
-#define HAVE_ARCH_PCI_RESOURCE_TO_USER
-extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
- const struct resource *rsrc,
- resource_size_t *start, resource_size_t *end);
-
-
-#endif /* __KERNEL__ */
-
-#endif /* __PPC_PCI_H */
diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h
deleted file mode 100644
index fd4d1d74cfb1..000000000000
--- a/include/asm-ppc/pgalloc.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_PGALLOC_H
-#define _PPC_PGALLOC_H
-
-#include <linux/threads.h>
-
-extern void __bad_pte(pmd_t *pmd);
-
-extern pgd_t *pgd_alloc(struct mm_struct *mm);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-/*
- * We don't have any real pmd's, and this code never triggers because
- * the pgd will always be present..
- */
-#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); })
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
-#define pgd_populate(mm, pmd, pte) BUG()
-
-#ifndef CONFIG_BOOKE
-#define pmd_populate_kernel(mm, pmd, pte) \
- (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte) \
- (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#else
-#define pmd_populate_kernel(mm, pmd, pte) \
- (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte) \
- (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-#endif
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
-extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
-extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
-extern void pte_free(struct mm_struct *mm, pgtable_t pte);
-
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _PPC_PGALLOC_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
deleted file mode 100644
index 55f9d38e3bf8..000000000000
--- a/include/asm-ppc/pgtable.h
+++ /dev/null
@@ -1,771 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_PGTABLE_H
-#define _PPC_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-#include <linux/threads.h>
-#include <asm/processor.h> /* For TASK_SIZE */
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */
-struct mm_struct;
-
-extern unsigned long va_to_phys(unsigned long address);
-extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
-#endif /* __ASSEMBLY__ */
-
-/*
- * The PowerPC MMU uses a hash table containing PTEs, together with
- * a set of 16 segment registers (on 32-bit implementations), to define
- * the virtual to physical address mapping.
- *
- * We use the hash table as an extended TLB, i.e. a cache of currently
- * active mappings. We maintain a two-level page table tree, much
- * like that used by the i386, for the sake of the Linux memory
- * management code. Low-level assembler code in hashtable.S
- * (procedure hash_page) is responsible for extracting ptes from the
- * tree and putting them into the hash table when necessary, and
- * updating the accessed and modified bits in the page table tree.
- */
-
-/*
- * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
- * We also use the two level tables, but we can put the real bits in them
- * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0,
- * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has
- * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
- * based upon user/super access. The TLB does not have accessed nor write
- * protect. We assume that if the TLB get loaded with an entry it is
- * accessed, and overload the changed bit for write protect. We use
- * two bits in the software pte that are supposed to be set to zero in
- * the TLB entry (24 and 25) for these indicators. Although the level 1
- * descriptor contains the guarded and writethrough/copyback bits, we can
- * set these at the page level since they get copied from the Mx_TWC
- * register when the TLB entry is loaded. We will use bit 27 for guard, since
- * that is where it exists in the MD_TWC, and bit 26 for writethrough.
- * These will get masked from the level 2 descriptor at TLB load time, and
- * copied to the MD_TWC before it gets loaded.
- * Large page sizes added. We currently support two sizes, 4K and 8M.
- * This also allows a TLB hander optimization because we can directly
- * load the PMD into MD_TWC. The 8M pages are only used for kernel
- * mapping of well known areas. The PMD (PGD) entries contain control
- * flags in addition to the address, so care must be taken that the
- * software no longer assumes these are only pointers.
- */
-
-/*
- * At present, all PowerPC 400-class processors share a similar TLB
- * architecture. The instruction and data sides share a unified,
- * 64-entry, fully-associative TLB which is maintained totally under
- * software control. In addition, the instruction side has a
- * hardware-managed, 4-entry, fully-associative TLB which serves as a
- * first level to the shared TLB. These two TLBs are known as the UTLB
- * and ITLB, respectively (see "mmu.h" for definitions).
- */
-
-/*
- * The normal case is that PTEs are 32-bits and we have a 1-page
- * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
- *
- * For any >32-bit physical address platform, we can use the following
- * two level page table layout where the pgdir is 8KB and the MS 13 bits
- * are an index to the second level table. The combined pgdir/pmd first
- * level has 2048 entries and the second level has 512 64-bit PTE entries.
- * -Matt
- */
-/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
-#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT)
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a top-level page table entry can map */
-#define PGDIR_SHIFT PMD_SHIFT
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-
-/*
- * entries per page directory level: our page-table tree is two-level, so
- * we don't really have any PMD directory.
- */
-#define PTRS_PER_PTE (1 << PTE_SHIFT)
-#define PTRS_PER_PMD 1
-#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
-
-#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS 0
-
-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
-#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte "PTE_FMT".\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * We no longer map larger than phys RAM with the BATs so we don't have
- * to worry about the VMALLOC_OFFSET causing problems. We do have to worry
- * about clashes between our early calls to ioremap() that start growing down
- * from ioremap_base being run into the VM area allocations (growing upwards
- * from VMALLOC_START). For this reason we have ioremap_bot to check when
- * we actually run into our mappings setup in the early boot with the VM
- * system. This really does become a problem for machines with good amounts
- * of RAM. -- Cort
- */
-#define VMALLOC_OFFSET (0x1000000) /* 16M */
-#ifdef PPC_PIN_SIZE
-#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#else
-#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
-#endif
-#define VMALLOC_END ioremap_bot
-
-/*
- * Bits in a linux-style PTE. These match the bits in the
- * (hardware-defined) PowerPC PTE as closely as possible.
- */
-
-#if defined(CONFIG_40x)
-
-/* There are several potential gotchas here. The 40x hardware TLBLO
- field looks like this:
-
- 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- RPN..................... 0 0 EX WR ZSEL....... W I M G
-
- Where possible we make the Linux PTE bits match up with this
-
- - bits 20 and 21 must be cleared, because we use 4k pages (40x can
- support down to 1k pages), this is done in the TLBMiss exception
- handler.
- - We use only zones 0 (for kernel pages) and 1 (for user pages)
- of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
- miss handler. Bit 27 is PAGE_USER, thus selecting the correct
- zone.
- - PRESENT *must* be in the bottom two bits because swap cache
- entries use the top 30 bits. Because 40x doesn't support SMP
- anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
- is cleared in the TLB miss handler before the TLB entry is loaded.
- - All other bits of the PTE are loaded into TLBLO without
- modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
- software PTE bits. We actually use use bits 21, 24, 25, and
- 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
- PRESENT.
-*/
-
-/* Definitions for 40x embedded chips. */
-#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
-#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */
-#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
-#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
-#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
-#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
-#define _PAGE_RW 0x040 /* software: Writes permitted */
-#define _PAGE_DIRTY 0x080 /* software: dirty page */
-#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
-#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
-
-#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */
-#define _PMD_BAD 0x802
-#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */
-#define _PMD_SIZE_4M 0x0c0
-#define _PMD_SIZE_16M 0x0e0
-#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4))
-
-#elif defined(CONFIG_44x)
-/*
- * Definitions for PPC440
- *
- * Because of the 3 word TLB entries to support 36-bit addressing,
- * the attribute are difficult to map in such a fashion that they
- * are easily loaded during exception processing. I decided to
- * organize the entry so the ERPN is the only portion in the
- * upper word of the PTE and the attribute bits below are packed
- * in as sensibly as they can be in the area below a 4KB page size
- * oriented RPN. This at least makes it easy to load the RPN and
- * ERPN fields in the TLB. -Matt
- *
- * Note that these bits preclude future use of a page size
- * less than 4KB.
- *
- *
- * PPC 440 core has following TLB attribute fields;
- *
- * TLB1:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * RPN................................. - - - - - - ERPN.......
- *
- * TLB2:
- * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR
- *
- * There are some constrains and options, to decide mapping software bits
- * into TLB entry.
- *
- * - PRESENT *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - FILE *must* be in the bottom three bits because swap cache
- * entries use the top 29 bits for TLB2.
- *
- * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
- * doesn't support SMP. So we can use this as software bit, like
- * DIRTY.
- *
- * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
- * for memory protection related functions (see PTE structure in
- * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the
- * above bits. Note that the bit values are CPU specific, not architecture
- * specific.
- *
- * The kernel PTE entry holds an arch-dependent swp_entry structure under
- * certain situations. In other words, in such situations some portion of
- * the PTE bits are used as a swp_entry. In the PPC implementation, the
- * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
- * hold protection values. That means the three protection bits are
- * reserved for both PTE and SWAP entry at the most significant three
- * LSBs.
- *
- * There are three protection bits available for SWAP entry:
- * _PAGE_PRESENT
- * _PAGE_FILE
- * _PAGE_HASHPTE (if HW has)
- *
- * So those three bits have to be inside of 0-2nd LSB of PTE.
- *
- */
-
-#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */
-#define _PAGE_RW 0x00000002 /* S: Write permission */
-#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */
-#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */
-#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */
-#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */
-#define _PAGE_USER 0x00000040 /* S: User page */
-#define _PAGE_ENDIAN 0x00000080 /* H: E bit */
-#define _PAGE_GUARDED 0x00000100 /* H: G bit */
-#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */
-#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */
-#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */
-
-/* TODO: Add large page lowmem mapping support */
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK 0xffffffff00000000ULL
-
-#elif defined(CONFIG_8xx)
-/* Definitions for 8xx embedded chips. */
-#define _PAGE_PRESENT 0x0001 /* Page is valid */
-#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
-#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
-#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
-
-/* These five software bits must be masked out when the entry is loaded
- * into the TLB.
- */
-#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */
-#define _PAGE_GUARDED 0x0010 /* software: guarded access */
-#define _PAGE_DIRTY 0x0020 /* software: page changed */
-#define _PAGE_RW 0x0040 /* software: user write access allowed */
-#define _PAGE_ACCESSED 0x0080 /* software: page referenced */
-
-/* Setting any bits in the nibble with the follow two controls will
- * require a TLB exception handler change. It is assumed unused bits
- * are always zero.
- */
-#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */
-#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */
-
-#define _PMD_PRESENT 0x0001
-#define _PMD_BAD 0x0ff0
-#define _PMD_PAGE_MASK 0x000c
-#define _PMD_PAGE_8M 0x000c
-
-#define _PTE_NONE_MASK _PAGE_ACCESSED
-
-#else /* CONFIG_6xx */
-/* Definitions for 60x, 740/750, etc. */
-#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */
-#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */
-#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */
-#define _PAGE_USER 0x004 /* usermode access allowed */
-#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */
-#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */
-#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */
-#define _PAGE_DIRTY 0x080 /* C: page changed */
-#define _PAGE_ACCESSED 0x100 /* R: page referenced */
-#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */
-#define _PAGE_RW 0x400 /* software: user write access allowed */
-
-#define _PTE_NONE_MASK _PAGE_HASHPTE
-
-#define _PMD_PRESENT 0
-#define _PMD_PRESENT_MASK (PAGE_MASK)
-#define _PMD_BAD (~PAGE_MASK)
-#endif
-
-/*
- * Some bits are only used on some cpu families...
- */
-#ifndef _PAGE_HASHPTE
-#define _PAGE_HASHPTE 0
-#endif
-#ifndef _PTE_NONE_MASK
-#define _PTE_NONE_MASK 0
-#endif
-#ifndef _PAGE_SHARED
-#define _PAGE_SHARED 0
-#endif
-#ifndef _PAGE_HWWRITE
-#define _PAGE_HWWRITE 0
-#endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC 0
-#endif
-#ifndef _PAGE_EXEC
-#define _PAGE_EXEC 0
-#endif
-#ifndef _PMD_PRESENT_MASK
-#define _PMD_PRESENT_MASK _PMD_PRESENT
-#endif
-#ifndef _PMD_SIZE
-#define _PMD_SIZE 0
-#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
-#endif
-
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-/*
- * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
- * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
- * to have it in the Linux PTE, and in fact the bit could be reused for
- * another purpose. -- paulus.
- */
-
-#ifdef CONFIG_44x
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
-#else
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
-#endif
-#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
-#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
-
-#ifdef CONFIG_PPC_STD_MMU
-/* On standard PPC MMU, no user access implies kernel read/write access,
- * so to write-protect kernel memory we must turn on user access */
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
-#else
-#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
-#endif
-
-#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
-/* We want the debuggers to be able to set breakpoints anywhere, so
- * don't write protect the kernel text */
-#define _PAGE_RAM_TEXT _PAGE_RAM
-#else
-#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC)
-#endif
-
-#define PAGE_NONE __pgprot(_PAGE_BASE)
-#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
-#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
-#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
-#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
-
-#define PAGE_KERNEL __pgprot(_PAGE_RAM)
-#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO)
-
-/*
- * The PowerPC can only do execute protection on a segment (256MB) basis,
- * not on a page basis. So we consider execute permission the same as read.
- * Also, write permissions imply read permissions.
- * This is the closest we can get..
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY_X
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY_X
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY_X
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY_X
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY_X
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED_X
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY_X
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED_X
-
-#ifndef __ASSEMBLY__
-/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
- * kernel without large page PMD support */
-extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
-
-/*
- * Conversions between PTE values and page frame numbers.
- */
-
-/* in some case we want to additionaly adjust where the pfn is in the pte to
- * allow room for more flags */
-#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
-
-#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-
-#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
- pgprot_val(prot))
-#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[1024];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-#endif /* __ASSEMBLY__ */
-
-#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
-
-#define pmd_none(pmd) (!pmd_val(pmd))
-#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD)
-#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK)
-#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
-
-#ifndef __ASSEMBLY__
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-#define pgd_clear(xp) do { } while (0)
-
-#define pgd_page_vaddr(pgd) \
- ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_special(pte_t pte) { return 0; }
-
-static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
-static inline pte_t pte_wrprotect(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
- pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
- pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-
-static inline pte_t pte_mkwrite(pte_t pte) {
- pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
- pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
- pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
- return pte; }
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
- return pte;
-}
-
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry. flush_hash_pages is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_pages(unsigned context, unsigned long va,
- unsigned long pmdval, int count);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va,
- unsigned long pmdval);
-
-/*
- * Atomic PTE updates.
- *
- * pte_update clears and sets bit atomically, and returns
- * the old pte value. In the 64-bit PTE case we lock around the
- * low PTE word since we expect ALL flag bits to be there
- */
-#ifndef CONFIG_PTE_64BIT
-static inline unsigned long pte_update(pte_t *p, unsigned long clr,
- unsigned long set)
-{
- unsigned long old, tmp;
-
- __asm__ __volatile__("\
-1: lwarx %0,0,%3\n\
- andc %1,%0,%4\n\
- or %1,%1,%5\n"
- PPC405_ERR77(0,%3)
-" stwcx. %1,0,%3\n\
- bne- 1b"
- : "=&r" (old), "=&r" (tmp), "=m" (*p)
- : "r" (p), "r" (clr), "r" (set), "m" (*p)
- : "cc" );
- return old;
-}
-#else
-static inline unsigned long long pte_update(pte_t *p, unsigned long clr,
- unsigned long set)
-{
- unsigned long long old;
- unsigned long tmp;
-
- __asm__ __volatile__("\
-1: lwarx %L0,0,%4\n\
- lwzx %0,0,%3\n\
- andc %1,%L0,%5\n\
- or %1,%1,%6\n"
- PPC405_ERR77(0,%3)
-" stwcx. %1,0,%4\n\
- bne- 1b"
- : "=&r" (old), "=&r" (tmp), "=m" (*p)
- : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
- : "cc" );
- return old;
-}
-#endif
-
-/*
- * set_pte stores a linux PTE into the linux page table.
- * On machines which use an MMU hash table we avoid changing the
- * _PAGE_HASHPTE bit.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
-#if _PAGE_HASHPTE != 0
- pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
-#else
- *ptep = pte;
-#endif
-}
-
-/*
- * 2.6 calles this without flushing the TLB entry, this is wrong
- * for our hash-based implementation, we fix that up here
- */
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
-{
- unsigned long old;
- old = pte_update(ptep, _PAGE_ACCESSED, 0);
-#if _PAGE_HASHPTE != 0
- if (old & _PAGE_HASHPTE) {
- unsigned long ptephys = __pa(ptep) & PAGE_MASK;
- flush_hash_pages(context, addr, ptephys, 1);
- }
-#endif
- return (old & _PAGE_ACCESSED) != 0;
-}
-#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
- __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
-
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
-}
-
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
-}
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
-{
- unsigned long bits = pte_val(entry) &
- (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
- pte_update(ptep, 0, bits);
-}
-
-#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
-({ \
- int __changed = !pte_same(*(__ptep), __entry); \
- if (__changed) { \
- __ptep_set_access_flags(__ptep, __entry, __dirty); \
- flush_tlb_page_nohash(__vma, __address); \
- } \
- __changed; \
-})
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
-#define __HAVE_ARCH_PTE_SAME
-#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
-
-/*
- * Note that on Book E processors, the pmd contains the kernel virtual
- * (lowmem) address of the pte page. The physical address is less useful
- * because everything runs with translation enabled (even the TLB miss
- * handler). On everything else the pmd contains the physical address
- * of the pte page. -- paulus
- */
-#ifndef CONFIG_BOOKE
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd) \
- (mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
-#else
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd) \
- (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
-#endif
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/* Find an entry in the second-level page table.. */
-static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
-{
- return (pmd_t *) dir;
-}
-
-/* Find an entry in the third-level page table.. */
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, addr) \
- ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
-#define pte_offset_map(dir, addr) \
- ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
-#define pte_offset_map_nested(dir, addr) \
- ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
-
-#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
-#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-extern void paging_init(void);
-
-/*
- * Encode and decode a swap entry.
- * Note that the bits we use in a PTE for representing a swap entry
- * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
- *_PAGE_HASHPTE bit (if used). -- paulus
- */
-#define __swp_type(entry) ((entry).val & 0x1f)
-#define __swp_offset(entry) ((entry).val >> 5)
-#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 })
-
-/* Encode and decode a nonlinear file mapping entry */
-#define PTE_FILE_MAX_BITS 29
-#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
-#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE })
-
-/* Values for nocacheflag and cmode */
-/* These are not used by the APUS kernel_map, but prevents
- compilation errors. */
-#define KERNELMAP_FULL_CACHING 0
-#define KERNELMAP_NOCACHE_SER 1
-#define KERNELMAP_NOCACHE_NONSER 2
-#define KERNELMAP_NO_COPYBACK 3
-
-/*
- * Map some physical address range into the kernel address space.
- */
-extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp );
-
-/*
- * Set cache mode of (kernel space) address range.
- */
-extern void kernel_set_cachemode (unsigned long address, unsigned long size,
- unsigned int cmode);
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) (1)
-
-#ifdef CONFIG_PHYS_64BIT
-extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long paddr, unsigned long size, pgprot_t prot);
-
-static inline int io_remap_pfn_range(struct vm_area_struct *vma,
- unsigned long vaddr,
- unsigned long pfn,
- unsigned long size,
- pgprot_t prot)
-{
- phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
- return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot);
-}
-#else
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-#endif
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init() do { } while (0)
-
-extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
- pmd_t **pmdp);
-
-#include <asm-generic/pgtable.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _PPC_PGTABLE_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/pnp.h b/include/asm-ppc/pnp.h
deleted file mode 100644
index 6f6760b30dd8..000000000000
--- a/include/asm-ppc/pnp.h
+++ /dev/null
@@ -1,645 +0,0 @@
-#ifdef __KERNEL__
-/* 11/02/95 */
-/*----------------------------------------------------------------------------*/
-/* Plug and Play header definitions */
-/*----------------------------------------------------------------------------*/
-
-/* Structure map for PnP on PowerPC Reference Platform */
-/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993. It */
-/* (or later versions) is available on Compuserve in the PLUGPLAY area. */
-/* This code has extensions to that specification, namely new short and */
-/* long tag types for platform dependent information */
-
-/* Warning: LE notation used throughout this file */
-
-/* For enum's: if given in hex then they are bit significant, i.e. */
-/* only one bit is on for each enum */
-
-#ifndef _PNP_
-#define _PNP_
-
-#ifndef __ASSEMBLY__
-#define MAX_MEM_REGISTERS 9
-#define MAX_IO_PORTS 20
-#define MAX_IRQS 7
-/*#define MAX_DMA_CHANNELS 7*/
-
-/* Interrupt controllers */
-
-#define PNPinterrupt0 "PNP0000" /* AT Interrupt Controller */
-#define PNPinterrupt1 "PNP0001" /* EISA Interrupt Controller */
-#define PNPinterrupt2 "PNP0002" /* MCA Interrupt Controller */
-#define PNPinterrupt3 "PNP0003" /* APIC */
-#define PNPExtInt "IBM000D" /* PowerPC Extended Interrupt Controller */
-
-/* Timers */
-
-#define PNPtimer0 "PNP0100" /* AT Timer */
-#define PNPtimer1 "PNP0101" /* EISA Timer */
-#define PNPtimer2 "PNP0102" /* MCA Timer */
-
-/* DMA controllers */
-
-#define PNPdma0 "PNP0200" /* AT DMA Controller */
-#define PNPdma1 "PNP0201" /* EISA DMA Controller */
-#define PNPdma2 "PNP0202" /* MCA DMA Controller */
-
-/* start of August 15, 1994 additions */
-/* CMOS */
-#define PNPCMOS "IBM0009" /* CMOS */
-
-/* L2 Cache */
-#define PNPL2 "IBM0007" /* L2 Cache */
-
-/* NVRAM */
-#define PNPNVRAM "IBM0008" /* NVRAM */
-
-/* Power Management */
-#define PNPPM "IBM0005" /* Power Management */
-/* end of August 15, 1994 additions */
-
-/* Keyboards */
-
-#define PNPkeyboard0 "PNP0300" /* IBM PC/XT KB Cntlr (83 key, no mouse) */
-#define PNPkeyboard1 "PNP0301" /* Olivetti ICO (102 key) */
-#define PNPkeyboard2 "PNP0302" /* IBM PC/AT KB Cntlr (84 key) */
-#define PNPkeyboard3 "PNP0303" /* IBM Enhanced (101/2 key, PS/2 mouse) */
-#define PNPkeyboard4 "PNP0304" /* Nokia 1050 KB Cntlr */
-#define PNPkeyboard5 "PNP0305" /* Nokia 9140 KB Cntlr */
-#define PNPkeyboard6 "PNP0306" /* Standard Japanese KB Cntlr */
-#define PNPkeyboard7 "PNP0307" /* Microsoft Windows (R) KB Cntlr */
-
-/* Parallel port controllers */
-
-#define PNPparallel0 "PNP0400" /* Standard LPT Parallel Port */
-#define PNPparallel1 "PNP0401" /* ECP Parallel Port */
-#define PNPepp "IBM001C" /* EPP Parallel Port */
-
-/* Serial port controllers */
-
-#define PNPserial0 "PNP0500" /* Standard PC Serial port */
-#define PNPSerial1 "PNP0501" /* 16550A Compatible Serial port */
-
-/* Disk controllers */
-
-#define PNPdisk0 "PNP0600" /* Generic ESDI/IDE/ATA Compat HD Cntlr */
-#define PNPdisk1 "PNP0601" /* Plus Hardcard II */
-#define PNPdisk2 "PNP0602" /* Plus Hardcard IIXL/EZ */
-
-/* Diskette controllers */
-
-#define PNPdiskette0 "PNP0700" /* PC Standard Floppy Disk Controller */
-
-/* Display controllers */
-
-#define PNPdisplay0 "PNP0900" /* VGA Compatible */
-#define PNPdisplay1 "PNP0901" /* Video Seven VGA */
-#define PNPdisplay2 "PNP0902" /* 8514/A Compatible */
-#define PNPdisplay3 "PNP0903" /* Trident VGA */
-#define PNPdisplay4 "PNP0904" /* Cirrus Logic Laptop VGA */
-#define PNPdisplay5 "PNP0905" /* Cirrus Logic VGA */
-#define PNPdisplay6 "PNP0906" /* Tseng ET4000 or ET4000/W32 */
-#define PNPdisplay7 "PNP0907" /* Western Digital VGA */
-#define PNPdisplay8 "PNP0908" /* Western Digital Laptop VGA */
-#define PNPdisplay9 "PNP0909" /* S3 */
-#define PNPdisplayA "PNP090A" /* ATI Ultra Pro/Plus (Mach 32) */
-#define PNPdisplayB "PNP090B" /* ATI Ultra (Mach 8) */
-#define PNPdisplayC "PNP090C" /* XGA Compatible */
-#define PNPdisplayD "PNP090D" /* ATI VGA Wonder */
-#define PNPdisplayE "PNP090E" /* Weitek P9000 Graphics Adapter */
-#define PNPdisplayF "PNP090F" /* Oak Technology VGA */
-
-/* Peripheral busses */
-
-#define PNPbuses0 "PNP0A00" /* ISA Bus */
-#define PNPbuses1 "PNP0A01" /* EISA Bus */
-#define PNPbuses2 "PNP0A02" /* MCA Bus */
-#define PNPbuses3 "PNP0A03" /* PCI Bus */
-#define PNPbuses4 "PNP0A04" /* VESA/VL Bus */
-
-/* RTC, BIOS, planar devices */
-
-#define PNPspeaker0 "PNP0800" /* AT Style Speaker Sound */
-#define PNPrtc0 "PNP0B00" /* AT RTC */
-#define PNPpnpbios0 "PNP0C00" /* PNP BIOS (only created by root enum) */
-#define PNPpnpbios1 "PNP0C01" /* System Board Memory Device */
-#define PNPpnpbios2 "PNP0C02" /* Math Coprocessor */
-#define PNPpnpbios3 "PNP0C03" /* PNP BIOS Event Notification Interrupt */
-
-/* PCMCIA controller */
-
-#define PNPpcmcia0 "PNP0E00" /* Intel 82365 Compatible PCMCIA Cntlr */
-
-/* Mice */
-
-#define PNPmouse0 "PNP0F00" /* Microsoft Bus Mouse */
-#define PNPmouse1 "PNP0F01" /* Microsoft Serial Mouse */
-#define PNPmouse2 "PNP0F02" /* Microsoft Inport Mouse */
-#define PNPmouse3 "PNP0F03" /* Microsoft PS/2 Mouse */
-#define PNPmouse4 "PNP0F04" /* Mousesystems Mouse */
-#define PNPmouse5 "PNP0F05" /* Mousesystems 3 Button Mouse - COM2 */
-#define PNPmouse6 "PNP0F06" /* Genius Mouse - COM1 */
-#define PNPmouse7 "PNP0F07" /* Genius Mouse - COM2 */
-#define PNPmouse8 "PNP0F08" /* Logitech Serial Mouse */
-#define PNPmouse9 "PNP0F09" /* Microsoft Ballpoint Serial Mouse */
-#define PNPmouseA "PNP0F0A" /* Microsoft PNP Mouse */
-#define PNPmouseB "PNP0F0B" /* Microsoft PNP Ballpoint Mouse */
-
-/* Modems */
-
-#define PNPmodem0 "PNP9000" /* Specific IDs TBD */
-
-/* Network controllers */
-
-#define PNPnetworkC9 "PNP80C9" /* IBM Token Ring */
-#define PNPnetworkCA "PNP80CA" /* IBM Token Ring II */
-#define PNPnetworkCB "PNP80CB" /* IBM Token Ring II/Short */
-#define PNPnetworkCC "PNP80CC" /* IBM Token Ring 4/16Mbs */
-#define PNPnetwork27 "PNP8327" /* IBM Token Ring (All types) */
-#define PNPnetworket "IBM0010" /* IBM Ethernet used by Power PC */
-#define PNPneteisaet "IBM2001" /* IBM Ethernet EISA adapter */
-#define PNPAMD79C970 "IBM0016" /* AMD 79C970 (PCI Ethernet) */
-
-/* SCSI controllers */
-
-#define PNPscsi0 "PNPA000" /* Adaptec 154x Compatible SCSI Cntlr */
-#define PNPscsi1 "PNPA001" /* Adaptec 174x Compatible SCSI Cntlr */
-#define PNPscsi2 "PNPA002" /* Future Domain 16-700 Compat SCSI Cntlr*/
-#define PNPscsi3 "PNPA003" /* Panasonic CDROM Adapter (SBPro/SB16) */
-#define PNPscsiF "IBM000F" /* NCR 810 SCSI Controller */
-#define PNPscsi825 "IBM001B" /* NCR 825 SCSI Controller */
-#define PNPscsi875 "IBM0018" /* NCR 875 SCSI Controller */
-
-/* Sound/Video, Multimedia */
-
-#define PNPmm0 "PNPB000" /* Sound Blaster Compatible Sound Device */
-#define PNPmm1 "PNPB001" /* MS Windows Sound System Compat Device */
-#define PNPmmF "IBM000E" /* Crystal CS4231 Audio Device */
-#define PNPv7310 "IBM0015" /* ASCII V7310 Video Capture Device */
-#define PNPmm4232 "IBM0017" /* Crystal CS4232 Audio Device */
-#define PNPpmsyn "IBM001D" /* YMF 289B chip (Yamaha) */
-#define PNPgp4232 "IBM0012" /* Crystal CS4232 Game Port */
-#define PNPmidi4232 "IBM0013" /* Crystal CS4232 MIDI */
-
-/* Operator Panel */
-#define PNPopctl "IBM000B" /* Operator's panel */
-
-/* Service Processor */
-#define PNPsp "IBM0011" /* IBM Service Processor */
-#define PNPLTsp "IBM001E" /* Lightning/Terlingua Support Processor */
-#define PNPLTmsp "IBM001F" /* Lightning/Terlingua Mini-SP */
-
-/* Memory Controller */
-#define PNPmemctl "IBM000A" /* Memory controller */
-
-/* Graphics Assist */
-#define PNPg_assist "IBM0014" /* Graphics Assist */
-
-/* Miscellaneous Device Controllers */
-#define PNPtablet "IBM0019" /* IBM Tablet Controller */
-
-/* PNP Packet Handles */
-
-#define S1_Packet 0x0A /* Version resource */
-#define S2_Packet 0x15 /* Logical DEVID (without flags) */
-#define S2_Packet_flags 0x16 /* Logical DEVID (with flags) */
-#define S3_Packet 0x1C /* Compatible device ID */
-#define S4_Packet 0x22 /* IRQ resource (without flags) */
-#define S4_Packet_flags 0x23 /* IRQ resource (with flags) */
-#define S5_Packet 0x2A /* DMA resource */
-#define S6_Packet 0x30 /* Depend funct start (w/o priority) */
-#define S6_Packet_priority 0x31 /* Depend funct start (w/ priority) */
-#define S7_Packet 0x38 /* Depend funct end */
-#define S8_Packet 0x47 /* I/O port resource (w/o fixed loc) */
-#define S9_Packet_fixed 0x4B /* I/O port resource (w/ fixed loc) */
-#define S14_Packet 0x71 /* Vendor defined */
-#define S15_Packet 0x78 /* End of resource (w/o checksum) */
-#define S15_Packet_checksum 0x79 /* End of resource (w/ checksum) */
-#define L1_Packet 0x81 /* Memory range */
-#define L1_Shadow 0x20 /* Memory is shadowable */
-#define L1_32bit_mem 0x18 /* 32-bit memory only */
-#define L1_8_16bit_mem 0x10 /* 8- and 16-bit supported */
-#define L1_Decode_Hi 0x04 /* decode supports high address */
-#define L1_Cache 0x02 /* read cacheable, write-through */
-#define L1_Writeable 0x01 /* Memory is writeable */
-#define L2_Packet 0x82 /* ANSI ID string */
-#define L3_Packet 0x83 /* Unicode ID string */
-#define L4_Packet 0x84 /* Vendor defined */
-#define L5_Packet 0x85 /* Large I/O */
-#define L6_Packet 0x86 /* 32-bit Fixed Loc Mem Range Desc */
-#define END_TAG 0x78 /* End of resource */
-#define DF_START_TAG 0x30 /* Dependent function start */
-#define DF_START_TAG_priority 0x31 /* Dependent function start */
-#define DF_END_TAG 0x38 /* Dependent function end */
-#define SUBOPTIMAL_CONFIGURATION 0x2 /* Priority byte sub optimal config */
-
-/* Device Base Type Codes */
-
-typedef enum _PnP_BASE_TYPE {
- Reserved = 0,
- MassStorageDevice = 1,
- NetworkInterfaceController = 2,
- DisplayController = 3,
- MultimediaController = 4,
- MemoryController = 5,
- BridgeController = 6,
- CommunicationsDevice = 7,
- SystemPeripheral = 8,
- InputDevice = 9,
- ServiceProcessor = 0x0A, /* 11/2/95 */
- } PnP_BASE_TYPE;
-
-/* Device Sub Type Codes */
-
-typedef enum _PnP_SUB_TYPE {
- SCSIController = 0,
- IDEController = 1,
- FloppyController = 2,
- IPIController = 3,
- OtherMassStorageController = 0x80,
-
- EthernetController = 0,
- TokenRingController = 1,
- FDDIController = 2,
- OtherNetworkController = 0x80,
-
- VGAController= 0,
- SVGAController= 1,
- XGAController= 2,
- OtherDisplayController = 0x80,
-
- VideoController = 0,
- AudioController = 1,
- OtherMultimediaController = 0x80,
-
- RAM = 0,
- FLASH = 1,
- OtherMemoryDevice = 0x80,
-
- HostProcessorBridge = 0,
- ISABridge = 1,
- EISABridge = 2,
- MicroChannelBridge = 3,
- PCIBridge = 4,
- PCMCIABridge = 5,
- VMEBridge = 6,
- OtherBridgeDevice = 0x80,
-
- RS232Device = 0,
- ATCompatibleParallelPort = 1,
- OtherCommunicationsDevice = 0x80,
-
- ProgrammableInterruptController = 0,
- DMAController = 1,
- SystemTimer = 2,
- RealTimeClock = 3,
- L2Cache = 4,
- NVRAM = 5,
- PowerManagement = 6,
- CMOS = 7,
- OperatorPanel = 8,
- ServiceProcessorClass1 = 9,
- ServiceProcessorClass2 = 0xA,
- ServiceProcessorClass3 = 0xB,
- GraphicAssist = 0xC,
- SystemPlanar = 0xF, /* 10/5/95 */
- OtherSystemPeripheral = 0x80,
-
- KeyboardController = 0,
- Digitizer = 1,
- MouseController = 2,
- TabletController = 3, /* 10/27/95 */
- OtherInputController = 0x80,
-
- GeneralMemoryController = 0,
- } PnP_SUB_TYPE;
-
-/* Device Interface Type Codes */
-
-typedef enum _PnP_INTERFACE {
- General = 0,
- GeneralSCSI = 0,
- GeneralIDE = 0,
- ATACompatible = 1,
-
- GeneralFloppy = 0,
- Compatible765 = 1,
- NS398_Floppy = 2, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26E_Floppy = 3, /* Ports 26E and 26F */
- NS15C_Floppy = 4, /* Ports 15C and 15D */
- NS2E_Floppy = 5, /* Ports 2E and 2F */
- CHRP_Floppy = 6, /* CHRP Floppy in PR*P system */
-
- GeneralIPI = 0,
-
- GeneralEther = 0,
- GeneralToken = 0,
- GeneralFDDI = 0,
-
- GeneralVGA = 0,
- GeneralSVGA = 0,
- GeneralXGA = 0,
-
- GeneralVideo = 0,
- GeneralAudio = 0,
- CS4232Audio = 1, /* CS 4232 Plug 'n Play Configured */
-
- GeneralRAM = 0,
- GeneralFLASH = 0,
- PCIMemoryController = 0, /* PCI Config Method */
- RS6KMemoryController = 1, /* RS6K Config Method */
-
- GeneralHostBridge = 0,
- GeneralISABridge = 0,
- GeneralEISABridge = 0,
- GeneralMCABridge = 0,
- GeneralPCIBridge = 0,
- PCIBridgeDirect = 0,
- PCIBridgeIndirect = 1,
- PCIBridgeRS6K = 2,
- GeneralPCMCIABridge = 0,
- GeneralVMEBridge = 0,
-
- GeneralRS232 = 0,
- COMx = 1,
- Compatible16450 = 2,
- Compatible16550 = 3,
- NS398SerPort = 4, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26ESerPort = 5, /* Ports 26E and 26F */
- NS15CSerPort = 6, /* Ports 15C and 15D */
- NS2ESerPort = 7, /* Ports 2E and 2F */
-
- GeneralParPort = 0,
- LPTx = 1,
- NS398ParPort = 2, /* NS Super I/O wired to use index
- register at port 398 and data
- register at port 399 */
- NS26EParPort = 3, /* Ports 26E and 26F */
- NS15CParPort = 4, /* Ports 15C and 15D */
- NS2EParPort = 5, /* Ports 2E and 2F */
-
- GeneralPIC = 0,
- ISA_PIC = 1,
- EISA_PIC = 2,
- MPIC = 3,
- RS6K_PIC = 4,
-
- GeneralDMA = 0,
- ISA_DMA = 1,
- EISA_DMA = 2,
-
- GeneralTimer = 0,
- ISA_Timer = 1,
- EISA_Timer = 2,
- GeneralRTC = 0,
- ISA_RTC = 1,
-
- StoreThruOnly = 1,
- StoreInEnabled = 2,
- RS6KL2Cache = 3,
-
- IndirectNVRAM = 0, /* Indirectly addressed */
- DirectNVRAM = 1, /* Memory Mapped */
- IndirectNVRAM24 = 2, /* Indirectly addressed - 24 bit */
-
- GeneralPowerManagement = 0,
- EPOWPowerManagement = 1,
- PowerControl = 2, // d1378
-
- GeneralCMOS = 0,
-
- GeneralOPPanel = 0,
- HarddiskLight = 1,
- CDROMLight = 2,
- PowerLight = 3,
- KeyLock = 4,
- ANDisplay = 5, /* AlphaNumeric Display */
- SystemStatusLED = 6, /* 3 digit 7 segment LED */
- CHRP_SystemStatusLED = 7, /* CHRP LEDs in PR*P system */
-
- GeneralServiceProcessor = 0,
-
- TransferData = 1,
- IGMC32 = 2,
- IGMC64 = 3,
-
- GeneralSystemPlanar = 0, /* 10/5/95 */
-
- } PnP_INTERFACE;
-
-/* PnP resources */
-
-/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */
-
-typedef struct _SERIAL_ID {
- unsigned char VendorID0; /* Bit(7)=0 */
- /* Bits(6:2)=1st character in */
- /* compressed ASCII */
- /* Bits(1:0)=2nd character in */
- /* compressed ASCII bits(4:3) */
- unsigned char VendorID1; /* Bits(7:5)=2nd character in */
- /* compressed ASCII bits(2:0) */
- /* Bits(4:0)=3rd character in */
- /* compressed ASCII */
- unsigned char VendorID2; /* Product number - vendor assigned */
- unsigned char VendorID3; /* Product number - vendor assigned */
-
-/* Serial number is to provide uniqueness if more than one board of same */
-/* type is in system. Must be "FFFFFFFF" if feature not supported. */
-
- unsigned char Serial0; /* Unique serial number bits (7:0) */
- unsigned char Serial1; /* Unique serial number bits (15:8) */
- unsigned char Serial2; /* Unique serial number bits (23:16) */
- unsigned char Serial3; /* Unique serial number bits (31:24) */
- unsigned char Checksum;
- } SERIAL_ID;
-
-typedef enum _PnPItemName {
- Unused = 0,
- PnPVersion = 1,
- LogicalDevice = 2,
- CompatibleDevice = 3,
- IRQFormat = 4,
- DMAFormat = 5,
- StartDepFunc = 6,
- EndDepFunc = 7,
- IOPort = 8,
- FixedIOPort = 9,
- Res1 = 10,
- Res2 = 11,
- Res3 = 12,
- SmallVendorItem = 14,
- EndTag = 15,
- MemoryRange = 1,
- ANSIIdentifier = 2,
- UnicodeIdentifier = 3,
- LargeVendorItem = 4,
- MemoryRange32 = 5,
- MemoryRangeFixed32 = 6,
- } PnPItemName;
-
-/* Define a bunch of access functions for the bits in the tag field */
-
-/* Tag type - 0 = small; 1 = large */
-#define tag_type(t) (((t) & 0x80)>>7)
-#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7))
-
-/* Small item name is 4 bits - one of PnPItemName enum above */
-#define tag_small_item_name(t) (((t) & 0x78)>>3)
-#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3))
-
-/* Small item count is 3 bits - count of further bytes in packet */
-#define tag_small_count(t) ((t) & 0x07)
-#define set_tag_count(t,v) (t = (t & 0x78) | (v))
-
-/* Large item name is 7 bits - one of PnPItemName enum above */
-#define tag_large_item_name(t) ((t) & 0x7f)
-#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v))
-
-/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */
-
-typedef union _PnP_TAG_PACKET {
- struct _S1_Pack{ /* VERSION PACKET */
- unsigned char Tag; /* small tag = 0x0a */
- unsigned char Version[2]; /* PnP version, Vendor version */
- } S1_Pack;
-
- struct _S2_Pack{ /* LOGICAL DEVICE ID PACKET */
- unsigned char Tag; /* small tag = 0x15 or 0x16 */
- unsigned char DevId[4]; /* Logical device id */
- unsigned char Flags[2]; /* bit(0) boot device; */
- /* bit(7:1) cmd in range x31-x37 */
- /* bit(7:0) cmd in range x28-x3f (opt)*/
- } S2_Pack;
-
- struct _S3_Pack{ /* COMPATIBLE DEVICE ID PACKET */
- unsigned char Tag; /* small tag = 0x1c */
- unsigned char CompatId[4]; /* Compatible device id */
- } S3_Pack;
-
- struct _S4_Pack{ /* IRQ PACKET */
- unsigned char Tag; /* small tag = 0x22 or 0x23 */
- unsigned char IRQMask[2]; /* bit(0) is IRQ0, ...; */
- /* bit(0) is IRQ8 ... */
- unsigned char IRQInfo; /* optional; assume bit(0)=1; else */
- /* bit(0) - high true edge sensitive */
- /* bit(1) - low true edge sensitive */
- /* bit(2) - high true level sensitive*/
- /* bit(3) - low true level sensitive */
- /* bit(7:4) - must be 0 */
- } S4_Pack;
-
- struct _S5_Pack{ /* DMA PACKET */
- unsigned char Tag; /* small tag = 0x2a */
- unsigned char DMAMask; /* bit(0) is channel 0 ... */
- unsigned char DMAInfo;
- } S5_Pack;
-
- struct _S6_Pack{ /* START DEPENDENT FUNCTION PACKET */
- unsigned char Tag; /* small tag = 0x30 or 0x31 */
- unsigned char Priority; /* Optional; if missing then x01; else*/
- /* x00 = best possible */
- /* x01 = acceptible */
- /* x02 = sub-optimal but functional */
- } S6_Pack;
-
- struct _S7_Pack{ /* END DEPENDENT FUNCTION PACKET */
- unsigned char Tag; /* small tag = 0x38 */
- } S7_Pack;
-
- struct _S8_Pack{ /* VARIABLE I/O PORT PACKET */
- unsigned char Tag; /* small tag x47 */
- unsigned char IOInfo; /* x0 = decode only bits(9:0); */
-#define ISAAddr16bit 0x01 /* x01 = decode bits(15:0) */
- unsigned char RangeMin[2]; /* Min base address */
- unsigned char RangeMax[2]; /* Max base address */
- unsigned char IOAlign; /* base alignmt, incr in 1B blocks */
- unsigned char IONum; /* number of contiguous I/O ports */
- } S8_Pack;
-
- struct _S9_Pack{ /* FIXED I/O PORT PACKET */
- unsigned char Tag; /* small tag = 0x4b */
- unsigned char Range[2]; /* base address 10 bits */
- unsigned char IONum; /* number of contiguous I/O ports */
- } S9_Pack;
-
- struct _S14_Pack{ /* VENDOR DEFINED PACKET */
- unsigned char Tag; /* small tag = 0x7m m = 1-7 */
- union _S14_Data{
- unsigned char Data[7]; /* Vendor defined */
- struct _S14_PPCPack{ /* Pr*p s14 pack */
- unsigned char Type; /* 00=non-IBM */
- unsigned char PPCData[6]; /* Vendor defined */
- } S14_PPCPack;
- } S14_Data;
- } S14_Pack;
-
- struct _S15_Pack{ /* END PACKET */
- unsigned char Tag; /* small tag = 0x78 or 0x79 */
- unsigned char Check; /* optional - checksum */
- } S15_Pack;
-
- struct _L1_Pack{ /* MEMORY RANGE PACKET */
- unsigned char Tag; /* large tag = 0x81 */
- unsigned char Count0; /* x09 */
- unsigned char Count1; /* x00 */
- unsigned char Data[9]; /* a variable array of bytes, */
- /* count in tag */
- } L1_Pack;
-
- struct _L2_Pack{ /* ANSI ID STRING PACKET */
- unsigned char Tag; /* large tag = 0x82 */
- unsigned char Count0; /* Length of string */
- unsigned char Count1;
- unsigned char Identifier[1]; /* a variable array of bytes, */
- /* count in tag */
- } L2_Pack;
-
- struct _L3_Pack{ /* UNICODE ID STRING PACKET */
- unsigned char Tag; /* large tag = 0x83 */
- unsigned char Count0; /* Length + 2 of string */
- unsigned char Count1;
- unsigned char Country0; /* TBD */
- unsigned char Country1; /* TBD */
- unsigned char Identifier[1]; /* a variable array of bytes, */
- /* count in tag */
- } L3_Pack;
-
- struct _L4_Pack{ /* VENDOR DEFINED PACKET */
- unsigned char Tag; /* large tag = 0x84 */
- unsigned char Count0;
- unsigned char Count1;
- union _L4_Data{
- unsigned char Data[1]; /* a variable array of bytes, */
- /* count in tag */
- struct _L4_PPCPack{ /* Pr*p L4 packet */
- unsigned char Type; /* 00=non-IBM */
- unsigned char PPCData[1]; /* a variable array of bytes, */
- /* count in tag */
- } L4_PPCPack;
- } L4_Data;
- } L4_Pack;
-
- struct _L5_Pack{
- unsigned char Tag; /* large tag = 0x85 */
- unsigned char Count0; /* Count = 17 */
- unsigned char Count1;
- unsigned char Data[17];
- } L5_Pack;
-
- struct _L6_Pack{
- unsigned char Tag; /* large tag = 0x86 */
- unsigned char Count0; /* Count = 9 */
- unsigned char Count1;
- unsigned char Data[9];
- } L6_Pack;
-
- } PnP_TAG_PACKET;
-
-#endif /* __ASSEMBLY__ */
-#endif /* ndef _PNP_ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h
deleted file mode 100644
index 935d1e05366b..000000000000
--- a/include/asm-ppc/ppc4xx_dma.h
+++ /dev/null
@@ -1,579 +0,0 @@
-/*
- * include/asm-ppc/ppc4xx_dma.h
- *
- * IBM PPC4xx DMA engine library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASMPPC_PPC4xx_DMA_H
-#define __ASMPPC_PPC4xx_DMA_H
-
-#include <linux/types.h>
-#include <asm/mmu.h>
-#include <asm/ibm4xx.h>
-
-#undef DEBUG_4xxDMA
-
-#define MAX_PPC4xx_DMA_CHANNELS 4
-
-/*
- * Function return status codes
- * These values are used to indicate whether or not the function
- * call was successful, or a bad/invalid parameter was passed.
- */
-#define DMA_STATUS_GOOD 0
-#define DMA_STATUS_BAD_CHANNEL 1
-#define DMA_STATUS_BAD_HANDLE 2
-#define DMA_STATUS_BAD_MODE 3
-#define DMA_STATUS_NULL_POINTER 4
-#define DMA_STATUS_OUT_OF_MEMORY 5
-#define DMA_STATUS_SGL_LIST_EMPTY 6
-#define DMA_STATUS_GENERAL_ERROR 7
-#define DMA_STATUS_CHANNEL_NOTFREE 8
-
-#define DMA_CHANNEL_BUSY 0x80000000
-
-/*
- * These indicate status as returned from the DMA Status Register.
- */
-#define DMA_STATUS_NO_ERROR 0
-#define DMA_STATUS_CS 1 /* Count Status */
-#define DMA_STATUS_TS 2 /* Transfer Status */
-#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */
-#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */
-
-
-/*
- * DMA Channel Control Registers
- */
-
-#ifdef CONFIG_44x
-#define PPC4xx_DMA_64BIT
-#define DMA_CR_OFFSET 1
-#else
-#define DMA_CR_OFFSET 0
-#endif
-
-#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */
-#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31)
-#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31)
-
-#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */
-#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30)
-#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30)
-
-#define DMA_TD (1<<29)
-#define SET_DMA_TD(x) (((x)&0x1)<<29)
-#define GET_DMA_TD(x) (((x)&DMA_TD)>>29)
-
-#define DMA_PL (1<<28) /* Peripheral Location */
-#define SET_DMA_PL(x) (((x)&0x1)<<28)
-#define GET_DMA_PL(x) (((x)&DMA_PL)>>28)
-
-#define EXTERNAL_PERIPHERAL 0
-#define INTERNAL_PERIPHERAL 1
-
-#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */
-#define DMA_PW_MASK SET_DMA_PW(3)
-#define PW_8 0
-#define PW_16 1
-#define PW_32 2
-#define PW_64 3
-/* FIXME: Add PW_128 support for 440GP DMA block */
-#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET))
-
-#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */
-#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET))
-
-#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */
-#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET))
-
-#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */
-#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET))
-
-#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */
-#define DMA_TM_MASK SET_DMA_TM(3)
-#define TM_PERIPHERAL 0 /* Peripheral */
-#define TM_RESERVED 1 /* Reserved */
-#define TM_S_MM 2 /* Memory to Memory */
-#define TM_D_MM 3 /* Device Paced Memory to Memory */
-#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET))
-
-#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */
-#define DMA_PSC_MASK SET_DMA_PSC(3)
-#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET))
-
-#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */
-#define DMA_PWC_MASK SET_DMA_PWC(0x3F)
-#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET))
-
-#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */
-#define DMA_PHC_MASK SET_DMA_PHC(0x7)
-#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET))
-
-#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */
-#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET))
-
-#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET))
-#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET))
-
-#define DMA_DEC (1<<(2)) /* Address Decrement */
-#define SET_DMA_DEC(x) (((x)&0x1)<<2)
-#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2)
-
-
-/*
- * Transfer Modes
- * These modes are defined in a way that makes it possible to
- * simply "or" in the value in the control register.
- */
-
-#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */
-
- /* Device-paced memory to memory, */
- /* device is at source address */
-#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM))
-
- /* Device-paced memory to memory, */
- /* device is at destination address */
-#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM))
-
-/* 405gp/440gp */
-#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */
-#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3)
-#define PREFETCH_1 0 /* Prefetch 1 Double Word */
-#define PREFETCH_2 1
-#define PREFETCH_4 2
-#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET))
-
-#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */
-#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET))
-#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET))
-
-/* stb3x */
-
-#define DMA_ECE_ENABLE (1<<5)
-#define SET_DMA_ECE(x) (((x)&0x1)<<5)
-#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5)
-
-#define DMA_TCD_DISABLE (1<<4)
-#define SET_DMA_TCD(x) (((x)&0x1)<<4)
-#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4)
-
-typedef uint32_t sgl_handle_t;
-
-#ifdef CONFIG_PPC4xx_EDMA
-
-#define SGL_LIST_SIZE 4096
-#define DMA_PPC4xx_SIZE SGL_LIST_SIZE
-
-#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */
-#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3)
-#define PRIORITY_LOW 0
-#define PRIORITY_MID_LOW 1
-#define PRIORITY_MID_HIGH 2
-#define PRIORITY_HIGH 3
-#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET))
-
-/*
- * DMA Polarity Configuration Register
- */
-#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3)))
-#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3)))
-#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */
-
-/*
- * DMA Sleep Mode Register
- */
-#define SLEEP_MODE_ENABLE (1<<21)
-
-/*
- * DMA Status Register
- */
-#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
-#define DMA_CS1 (1<<30)
-#define DMA_CS2 (1<<29)
-#define DMA_CS3 (1<<28)
-
-#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
-#define DMA_TS1 (1<<26)
-#define DMA_TS2 (1<<25)
-#define DMA_TS3 (1<<24)
-
-#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
-#define DMA_CH1_ERR (1<<22)
-#define DMA_CH2_ERR (1<<21)
-#define DMA_CH3_ERR (1<<20)
-
-#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */
-#define DMA_IN_DMA_REQ1 (1<<18)
-#define DMA_IN_DMA_REQ2 (1<<17)
-#define DMA_IN_DMA_REQ3 (1<<16)
-
-#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */
-#define DMA_EXT_DMA_REQ1 (1<<14)
-#define DMA_EXT_DMA_REQ2 (1<<13)
-#define DMA_EXT_DMA_REQ3 (1<<12)
-
-#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */
-#define DMA_CH1_BUSY (1<<10)
-#define DMA_CH2_BUSY (1<<9)
-#define DMA_CH3_BUSY (1<<8)
-
-#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */
-#define DMA_SG1 (1<<6)
-#define DMA_SG2 (1<<5)
-#define DMA_SG3 (1<<4)
-
-/* DMA Channel Count Register */
-#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */
-#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */
-#define DMA_CTC_BSIZ_2 (0)
-#define DMA_CTC_BSIZ_4 (1<<21)
-#define DMA_CTC_BSIZ_8 (2<<21)
-#define DMA_CTC_BSIZ_16 (3<<21)
-
-/*
- * DMA SG Command Register
- */
-#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */
-#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */
-
-/*
- * DMA Scatter/Gather Descriptor Bit fields
- */
-#define SG_LINK (1<<31) /* Link */
-#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */
-#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */
-#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */
-#define SG_COUNT_MASK 0xFFFF /* Count Field */
-
-#define SET_DMA_CONTROL \
- (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
- SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\
- SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
- SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
- SET_DMA_PL(p_init->pl) | /* peripheral location */ \
- SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
- SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
- SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
- SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
- SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
- SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
- SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
- SET_DMA_PREFETCH(p_init->pf) /* read prefetch */)
-
-#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan))
-
-#elif defined(CONFIG_STB03xxx) /* stb03xxx */
-
-#define DMA_PPC4xx_SIZE 4096
-
-/*
- * DMA Status Register
- */
-
-#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */
-#define DMA_PRIORITY_MASK 0x00800001
-#define PRIORITY_LOW 0x00000000
-#define PRIORITY_MID_LOW 0x00000001
-#define PRIORITY_MID_HIGH 0x00800000
-#define PRIORITY_HIGH 0x00800001
-#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001))
-
-#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
-#define DMA_CS1 (1<<30)
-#define DMA_CS2 (1<<29)
-#define DMA_CS3 (1<<28)
-
-#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
-#define DMA_TS1 (1<<26)
-#define DMA_TS2 (1<<25)
-#define DMA_TS3 (1<<24)
-
-#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
-#define DMA_CH1_ERR (1<<22)
-#define DMA_CH2_ERR (1<<21)
-#define DMA_CH3_ERR (1<<20)
-
-#define DMA_CT0 (1<<19) /* Chained transfere */
-
-#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */
-#define DMA_IN_DMA_REQ1 (1<<17)
-#define DMA_IN_DMA_REQ2 (1<<16)
-#define DMA_IN_DMA_REQ3 (1<<15)
-
-#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */
-#define DMA_EXT_DMA_REQ1 (1<<13)
-#define DMA_EXT_DMA_REQ2 (1<<12)
-#define DMA_EXT_DMA_REQ3 (1<<11)
-
-#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */
-#define DMA_CH1_BUSY (1<<9)
-#define DMA_CH2_BUSY (1<<8)
-#define DMA_CH3_BUSY (1<<7)
-
-#define DMA_CT1 (1<<6) /* Chained transfere */
-#define DMA_CT2 (1<<5)
-#define DMA_CT3 (1<<4)
-
-#define DMA_CH_ENABLE (1<<7)
-#define SET_DMA_CH(x) (((x)&0x1)<<7)
-#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7)
-
-/* STBx25xxx dma unique */
-/* enable device port on a dma channel
- * example ext 0 on dma 1
- */
-
-#define SSP0_RECV 15
-#define SSP0_XMIT 14
-#define EXT_DMA_0 12
-#define SC1_XMIT 11
-#define SC1_RECV 10
-#define EXT_DMA_2 9
-#define EXT_DMA_3 8
-#define SERIAL2_XMIT 7
-#define SERIAL2_RECV 6
-#define SC0_XMIT 5
-#define SC0_RECV 4
-#define SERIAL1_XMIT 3
-#define SERIAL1_RECV 2
-#define SERIAL0_XMIT 1
-#define SERIAL0_RECV 0
-
-#define DMA_CHAN_0 1
-#define DMA_CHAN_1 2
-#define DMA_CHAN_2 3
-#define DMA_CHAN_3 4
-
-/* end STBx25xx */
-
-/*
- * Bit 30 must be one for Redwoods, otherwise transfers may receive errors.
- */
-#define DMA_CR_MB0 0x2
-
-#define SET_DMA_CONTROL \
- (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
- SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
- SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
- SET_DMA_PL(p_init->pl) | /* peripheral location */ \
- SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
- SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
- SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
- SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
- SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
- SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
- SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
- SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \
- SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \
- SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \
- DMA_CR_MB0 /* must be one */)
-
-#define GET_DMA_POLARITY(chan) chan
-
-#endif
-
-typedef struct {
- unsigned short in_use; /* set when channel is being used, clr when
- * available.
- */
- /*
- * Valid polarity settings:
- * DMAReq_ActiveLow(n)
- * DMAAck_ActiveLow(n)
- * EOT_ActiveLow(n)
- *
- * n is 0 to max dma chans
- */
- unsigned int polarity;
-
- char buffer_enable; /* Boolean: buffer enable */
- char tce_enable; /* Boolean: terminal count enable */
- char etd_output; /* Boolean: eot pin is a tc output */
- char pce; /* Boolean: parity check enable */
-
- /*
- * Peripheral location:
- * INTERNAL_PERIPHERAL (UART0 on the 405GP)
- * EXTERNAL_PERIPHERAL
- */
- char pl; /* internal/external peripheral */
-
- /*
- * Valid pwidth settings:
- * PW_8
- * PW_16
- * PW_32
- * PW_64
- */
- unsigned int pwidth;
-
- char dai; /* Boolean: dst address increment */
- char sai; /* Boolean: src address increment */
-
- /*
- * Valid psc settings: 0-3
- */
- unsigned int psc; /* Peripheral Setup Cycles */
-
- /*
- * Valid pwc settings:
- * 0-63
- */
- unsigned int pwc; /* Peripheral Wait Cycles */
-
- /*
- * Valid phc settings:
- * 0-7
- */
- unsigned int phc; /* Peripheral Hold Cycles */
-
- /*
- * Valid cp (channel priority) settings:
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- */
- unsigned int cp; /* channel priority */
-
- /*
- * Valid pf (memory read prefetch) settings:
- *
- * PREFETCH_1
- * PREFETCH_2
- * PREFETCH_4
- */
- unsigned int pf; /* memory read prefetch */
-
- /*
- * Boolean: channel interrupt enable
- * NOTE: for sgl transfers, only the last descriptor will be setup to
- * interrupt.
- */
- char int_enable;
-
- char shift; /* easy access to byte_count shift, based on */
- /* the width of the channel */
-
- uint32_t control; /* channel control word */
-
- /* These variabled are used ONLY in single dma transfers */
- unsigned int mode; /* transfer mode */
- phys_addr_t addr;
- char ce; /* channel enable */
-#ifdef CONFIG_STB03xxx
- char ch_enable;
- char tcd_disable;
- char ece_enable;
- char td; /* transfer direction */
-#endif
-
- char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */
-} ppc_dma_ch_t;
-
-/*
- * PPC44x DMA implementations have a slightly different
- * descriptor layout. Probably moved about due to the
- * change to 64-bit addresses and link pointer. I don't
- * know why they didn't just leave control_count after
- * the dst_addr.
- */
-#ifdef PPC4xx_DMA_64BIT
-typedef struct {
- uint32_t control;
- uint32_t control_count;
- phys_addr_t src_addr;
- phys_addr_t dst_addr;
- phys_addr_t next;
-} ppc_sgl_t;
-#else
-typedef struct {
- uint32_t control;
- phys_addr_t src_addr;
- phys_addr_t dst_addr;
- uint32_t control_count;
- uint32_t next;
-} ppc_sgl_t;
-#endif
-
-typedef struct {
- unsigned int dmanr;
- uint32_t control; /* channel ctrl word; loaded from each descrptr */
- uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */
- dma_addr_t dma_addr; /* dma (physical) address of this list */
- ppc_sgl_t *phead;
- dma_addr_t phead_dma;
- ppc_sgl_t *ptail;
- dma_addr_t ptail_dma;
-} sgl_list_info_t;
-
-typedef struct {
- phys_addr_t *src_addr;
- phys_addr_t *dst_addr;
- phys_addr_t dma_src_addr;
- phys_addr_t dma_dst_addr;
-} pci_alloc_desc_t;
-
-extern ppc_dma_ch_t dma_channels[];
-
-/*
- * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c
- */
-extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *);
-extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *);
-extern int ppc4xx_set_channel_priority(unsigned int, unsigned int);
-extern unsigned int ppc4xx_get_peripheral_width(unsigned int);
-extern void ppc4xx_set_sg_addr(int, phys_addr_t);
-extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int);
-extern void ppc4xx_enable_dma_sgl(sgl_handle_t);
-extern void ppc4xx_disable_dma_sgl(sgl_handle_t);
-extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *);
-extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *);
-extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int);
-extern void ppc4xx_free_dma_handle(sgl_handle_t);
-extern int ppc4xx_get_dma_status(void);
-extern int ppc4xx_enable_burst(unsigned int);
-extern int ppc4xx_disable_burst(unsigned int);
-extern int ppc4xx_set_burst_size(unsigned int, unsigned int);
-extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr);
-extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr);
-extern void ppc4xx_enable_dma(unsigned int dmanr);
-extern void ppc4xx_disable_dma(unsigned int dmanr);
-extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count);
-extern int ppc4xx_get_dma_residue(unsigned int dmanr);
-extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
- phys_addr_t dst_dma_addr);
-extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr);
-extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr);
-extern int ppc4xx_clr_dma_status(unsigned int dmanr);
-extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
-extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
-extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode);
-
-/* These are in kernel/dma.c: */
-
-/* reserve a DMA channel */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-/* release it again */
-extern void free_dma(unsigned int dmanr);
-#endif
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppc4xx_pic.h b/include/asm-ppc/ppc4xx_pic.h
deleted file mode 100644
index e44261206f8b..000000000000
--- a/include/asm-ppc/ppc4xx_pic.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * include/asm-ppc/ppc4xx_pic.h
- *
- * Interrupt controller driver for PowerPC 4xx-based processors.
- *
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC4XX_PIC_H__
-#define __PPC4XX_PIC_H__
-
-#include <linux/types.h>
-#include <linux/irq.h>
-
-/* "Fixed" UIC settings (they are chip, not board specific),
- * e.g. polarity/triggerring for internal interrupt sources.
- *
- * Platform port should provide NR_UICS-sized array named ppc4xx_core_uic_cfg
- * with these "fixed" settings: .polarity contains exact value which will
- * be written (masked with "ext_irq_mask") into UICx_PR register,
- * .triggering - to UICx_TR.
- *
- * Settings for external IRQs can be specified separately by the
- * board support code. In this case properly sized array of unsigned
- * char named ppc4xx_uic_ext_irq_cfg should be filled with correct
- * values using IRQ_SENSE_XXXXX and IRQ_POLARITY_XXXXXXX defines.
- *
- * If these arrays aren't provided, UIC initialization code keeps firmware
- * configuration. Also, ppc4xx_uic_ext_irq_cfg implies ppc4xx_core_uic_cfg
- * is defined.
- *
- * Both ppc4xx_core_uic_cfg and ppc4xx_uic_ext_irq_cfg are declared as
- * "weak" symbols in ppc4xx_pic.c
- *
- */
-struct ppc4xx_uic_settings {
- u32 polarity;
- u32 triggering;
- u32 ext_irq_mask;
-};
-
-extern void ppc4xx_pic_init(void);
-
-#endif /* __PPC4XX_PIC_H__ */
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
deleted file mode 100644
index d2fee41d600b..000000000000
--- a/include/asm-ppc/ppc_sys.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-ppc/ppc_sys.h
- *
- * PPC system definitions and library functions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_SYS_H
-#define __ASM_PPC_SYS_H
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#if defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_PPC_MPC52xx)
-#include <asm/mpc52xx.h>
-#elif defined(CONFIG_MPC10X_BRIDGE)
-#include <asm/mpc10x.h>
-#else
-#error "need definition of ppc_sys_devices"
-#endif
-
-#define PPC_SYS_IORESOURCE_FIXUPPED 0x00000001
-
-struct ppc_sys_spec {
- /* PPC sys is matched via (ID & mask) == value, id could be
- * PVR, SVR, IMMR, * etc. */
- u32 mask;
- u32 value;
- u32 num_devices;
- char *ppc_sys_name;
- u8 config[NUM_PPC_SYS_DEVS];
- enum ppc_sys_devices *device_list;
-};
-
-struct platform_notify_dev_map {
- const char *bus_id;
- void (*rtn)(struct platform_device * pdev, int idx);
-};
-
-enum platform_device_func {
- PPC_SYS_FUNC_DUMMY = 0,
- PPC_SYS_FUNC_ETH = 1,
- PPC_SYS_FUNC_UART = 2,
- PPC_SYS_FUNC_HLDC = 3,
- PPC_SYS_FUNC_USB = 4,
- PPC_SYS_FUNC_IRDA = 5,
-};
-
-#define PPC_SYS_CONFIG_DISABLED 1
-
-/* describes all specific chips and which devices they have on them */
-extern struct ppc_sys_spec ppc_sys_specs[];
-extern struct ppc_sys_spec *cur_ppc_sys_spec;
-
-/* determine which specific SOC we are */
-extern void identify_ppc_sys_by_id(u32 id) __init;
-extern void identify_ppc_sys_by_name(char *name) __init;
-extern void identify_ppc_sys_by_name_and_id(char *name, u32 id) __init;
-
-/* describes all devices that may exist in a given family of processors */
-extern struct platform_device ppc_sys_platform_devices[];
-
-/* allow any platform_device fixup to occur before device is registered */
-extern int (*ppc_sys_device_fixup) (struct platform_device * pdev);
-
-/* Update all memory resources by paddr, call before platform_device_register */
-extern void ppc_sys_fixup_mem_resource(struct platform_device *pdev,
- phys_addr_t paddr) __init;
-
-/* Get platform_data pointer out of platform device, call before platform_device_register */
-extern void *ppc_sys_get_pdata(enum ppc_sys_devices dev) __init;
-
-/* remove a device from the system */
-extern void ppc_sys_device_remove(enum ppc_sys_devices dev);
-
-/* Function assignment stuff */
-void ppc_sys_device_initfunc(void);
-void ppc_sys_device_setfunc(enum ppc_sys_devices dev,
- enum platform_device_func func);
-void ppc_sys_device_set_func_all(enum platform_device_func func);
-
-void platform_notify_map(const struct platform_notify_dev_map *map,
- struct device *dev);
-
-/* Enable / disable stuff */
-void ppc_sys_device_disable(enum ppc_sys_devices dev);
-void ppc_sys_device_enable(enum ppc_sys_devices dev);
-void ppc_sys_device_enable_all(void);
-void ppc_sys_device_disable_all(void);
-
-#endif /* __ASM_PPC_SYS_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h
deleted file mode 100644
index 3819e17cd7b0..000000000000
--- a/include/asm-ppc/ppcboot.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_PPCBOOT_H__
-#define __ASM_PPCBOOT_H__
-
-/*
- * Board information passed to kernel from PPCBoot
- *
- * include/asm-ppc/ppcboot.h
- */
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-
-typedef struct bd_info {
- unsigned long bi_memstart; /* start of DRAM memory */
- unsigned long bi_memsize; /* size of DRAM memory in bytes */
- unsigned long bi_flashstart; /* start of FLASH memory */
- unsigned long bi_flashsize; /* size of FLASH memory */
- unsigned long bi_flashoffset; /* reserved area for startup monitor */
- unsigned long bi_sramstart; /* start of SRAM memory */
- unsigned long bi_sramsize; /* size of SRAM memory */
-#if defined(CONFIG_8xx) || defined(CONFIG_CPM2)
- unsigned long bi_immr_base; /* base of IMMR register */
-#endif
-#if defined(CONFIG_PPC_MPC52xx)
- unsigned long bi_mbar_base; /* base of internal registers */
-#endif
- unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* Ethernet address */
- unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
- unsigned long bi_intfreq; /* Internal Freq, in MHz */
- unsigned long bi_busfreq; /* Bus Freq, in MHz */
-#if defined(CONFIG_CPM2)
- unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */
- unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */
- unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */
- unsigned long bi_vco; /* VCO Out from PLL, in MHz */
-#endif
-#if defined(CONFIG_PPC_MPC52xx)
- unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */
- unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */
-#endif
- unsigned long bi_baudrate; /* Console Baudrate */
-#if defined(CONFIG_4xx)
- unsigned char bi_s_version[4]; /* Version of this structure */
- unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */
- unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */
- unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */
- unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
- unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
-#endif
-#if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
-#endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x)
- /* second onboard ethernet port */
- unsigned char bi_enet1addr[6];
-#endif
-#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX)
- /* third onboard ethernet ports */
- unsigned char bi_enet2addr[6];
-#endif
-#if defined(CONFIG_440GX)
- /* fourth onboard ethernet ports */
- unsigned char bi_enet3addr[6];
-#endif
-#if defined(CONFIG_4xx)
- unsigned int bi_opbfreq; /* OB clock in Hz */
- int bi_iic_fast[2]; /* Use fast i2c mode */
-#endif
-#if defined(CONFIG_440GX)
- int bi_phynum[4]; /* phy mapping */
- int bi_phymode[4]; /* phy mode */
-#endif
-} bd_t;
-
-#define bi_tbfreq bi_intfreq
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_PPCBOOT_H__ */
diff --git a/include/asm-ppc/prep_nvram.h b/include/asm-ppc/prep_nvram.h
deleted file mode 100644
index 6dbc36a84df2..000000000000
--- a/include/asm-ppc/prep_nvram.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * PreP compliant NVRAM access
- */
-
-/* Corey Minyard (minyard@acm.org) - Stolen from PReP book. Per the
- license I must say:
- (C) Copyright (Corey Minyard), (1998). All rights reserved
- */
-
-/* Structure map for NVRAM on PowerPC Reference Platform */
-/* All fields are either character/byte strings which are valid either
- endian or they are big-endian numbers.
-
- There are a number of Date and Time fields which are in RTC format,
- big-endian. These are stored in UT (GMT).
-
- For enum's: if given in hex then they are bit significant, i.e. only
- one bit is on for each enum.
-*/
-#ifdef __KERNEL__
-#ifndef _PPC_PREP_NVRAM_H
-#define _PPC_PREP_NVRAM_H
-
-#define MAX_PREP_NVRAM 0x8000
-#define PREP_NVRAM_AS0 0x74
-#define PREP_NVRAM_AS1 0x75
-#define PREP_NVRAM_DATA 0x77
-
-#define NVSIZE 4096 /* size of NVRAM */
-#define OSAREASIZE 512 /* size of OSArea space */
-#define CONFSIZE 1024 /* guess at size of Configuration space */
-
-typedef struct _SECURITY {
- unsigned long BootErrCnt; /* Count of boot password errors */
- unsigned long ConfigErrCnt; /* Count of config password errors */
- unsigned long BootErrorDT[2]; /* Date&Time from RTC of last error in pw */
- unsigned long ConfigErrorDT[2]; /* Date&Time from RTC of last error in pw */
- unsigned long BootCorrectDT[2]; /* Date&Time from RTC of last correct pw */
- unsigned long ConfigCorrectDT[2]; /* Date&Time from RTC of last correct pw */
- unsigned long BootSetDT[2]; /* Date&Time from RTC of last set of pw */
- unsigned long ConfigSetDT[2]; /* Date&Time from RTC of last set of pw */
- unsigned char Serial[16]; /* Box serial number */
-} SECURITY;
-
-typedef enum _OS_ID {
- Unknown = 0,
- Firmware = 1,
- AIX = 2,
- NT = 3,
- MKOS2 = 4,
- MKAIX = 5,
- Taligent = 6,
- Solaris = 7,
- MK = 12
-} OS_ID;
-
-typedef struct _ERROR_LOG {
- unsigned char ErrorLogEntry[40]; /* To be architected */
-} ERROR_LOG;
-
-typedef enum _BOOT_STATUS {
- BootStarted = 0x01,
- BootFinished = 0x02,
- RestartStarted = 0x04,
- RestartFinished = 0x08,
- PowerFailStarted = 0x10,
- PowerFailFinished = 0x20,
- ProcessorReady = 0x40,
- ProcessorRunning = 0x80,
- ProcessorStart = 0x0100
-} BOOT_STATUS;
-
-typedef struct _RESTART_BLOCK {
- unsigned short Version;
- unsigned short Revision;
- unsigned long ResumeReserve1[2];
- volatile unsigned long BootStatus;
- unsigned long CheckSum; /* Checksum of RESTART_BLOCK */
- void * RestartAddress;
- void * SaveAreaAddr;
- unsigned long SaveAreaLength;
-} RESTART_BLOCK;
-
-typedef enum _OSAREA_USAGE {
- Empty = 0,
- Used = 1
-} OSAREA_USAGE;
-
-typedef enum _PM_MODE {
- Suspend = 0x80, /* Part of state is in memory */
- Normal = 0x00 /* No power management in effect */
-} PMMODE;
-
-typedef struct _HEADER {
- unsigned short Size; /* NVRAM size in K(1024) */
- unsigned char Version; /* Structure map different */
- unsigned char Revision; /* Structure map the same -may
- be new values in old fields
- in other words old code still works */
- unsigned short Crc1; /* check sum from beginning of nvram to OSArea */
- unsigned short Crc2; /* check sum of config */
- unsigned char LastOS; /* OS_ID */
- unsigned char Endian; /* B if big endian, L if little endian */
- unsigned char OSAreaUsage; /* OSAREA_USAGE */
- unsigned char PMMode; /* Shutdown mode */
- RESTART_BLOCK RestartBlock;
- SECURITY Security;
- ERROR_LOG ErrorLog[2];
-
- /* Global Environment information */
- void * GEAddress;
- unsigned long GELength;
-
- /* Date&Time from RTC of last change to Global Environment */
- unsigned long GELastWriteDT[2];
-
- /* Configuration information */
- void * ConfigAddress;
- unsigned long ConfigLength;
-
- /* Date&Time from RTC of last change to Configuration */
- unsigned long ConfigLastWriteDT[2];
- unsigned long ConfigCount; /* Count of entries in Configuration */
-
- /* OS dependent temp area */
- void * OSAreaAddress;
- unsigned long OSAreaLength;
-
- /* Date&Time from RTC of last change to OSAreaArea */
- unsigned long OSAreaLastWriteDT[2];
-} HEADER;
-
-/* Here is the whole map of the NVRAM */
-typedef struct _NVRAM_MAP {
- HEADER Header;
- unsigned char GEArea[NVSIZE-CONFSIZE-OSAREASIZE-sizeof(HEADER)];
- unsigned char OSArea[OSAREASIZE];
- unsigned char ConfigArea[CONFSIZE];
-} NVRAM_MAP;
-
-/* Routines to manipulate the NVRAM */
-void init_prep_nvram(void);
-char *prep_nvram_get_var(const char *name);
-char *prep_nvram_first_var(void);
-char *prep_nvram_next_var(char *name);
-
-/* Routines to read and write directly to the NVRAM */
-unsigned char prep_nvram_read_val(int addr);
-void prep_nvram_write_val(int addr,
- unsigned char val);
-
-#endif /* _PPC_PREP_NVRAM_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h
deleted file mode 100644
index 71f4c996fe75..000000000000
--- a/include/asm-ppc/prom.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-#ifdef __KERNEL__
-#ifndef _PPC_PROM_H
-#define _PPC_PROM_H
-
-/* This is used in arch/ppc/mm/mem_pieces.h */
-struct reg_property {
- unsigned int address;
- unsigned int size;
-};
-
-/*
- * These macros assist in performing the address calculations that we
- * need to do to access data when the kernel is running at an address
- * that is different from the address that the kernel is linked at.
- * The reloc_offset() function returns the difference between these
- * two addresses and the macros simplify the process of adding or
- * subtracting this offset to/from pointer values.
- */
-extern unsigned long reloc_offset(void);
-extern unsigned long add_reloc_offset(unsigned long);
-extern unsigned long sub_reloc_offset(unsigned long);
-
-#define PTRRELOC(x) ((typeof(x))add_reloc_offset((unsigned long)(x)))
-#define PTRUNRELOC(x) ((typeof(x))sub_reloc_offset((unsigned long)(x)))
-
-/*
- * Fallback definitions since we don't support OF in arch/ppc any more.
- */
-#define machine_is_compatible(x) 0
-#define of_find_compatible_node(f, t, c) NULL
-#define of_get_property(p, n, l) NULL
-
-#endif /* _PPC_PROM_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/raven.h b/include/asm-ppc/raven.h
deleted file mode 100644
index 66f52cc0a03c..000000000000
--- a/include/asm-ppc/raven.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-ppc/raven.h -- Raven MPIC chip.
- *
- * Copyright (C) 1998 Johnnie Peters
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifdef __KERNEL__
-#ifndef _ASMPPC_RAVEN_H
-#define _ASMPPC_RAVEN_H
-
-#define MVME2600_INT_SIO 0
-#define MVME2600_INT_FALCN_ECC_ERR 1
-#define MVME2600_INT_PCI_ETHERNET 2
-#define MVME2600_INT_PCI_SCSI 3
-#define MVME2600_INT_PCI_GRAPHICS 4
-#define MVME2600_INT_PCI_VME0 5
-#define MVME2600_INT_PCI_VME1 6
-#define MVME2600_INT_PCI_VME2 7
-#define MVME2600_INT_PCI_VME3 8
-#define MVME2600_INT_PCI_INTA 9
-#define MVME2600_INT_PCI_INTB 10
-#define MVME2600_INT_PCI_INTC 11
-#define MVME2600_INT_PCI_INTD 12
-#define MVME2600_INT_LM_SIG0 13
-#define MVME2600_INT_LM_SIG1 14
-
-extern struct hw_interrupt_type raven_pic;
-
-extern int raven_init(void);
-#endif /* _ASMPPC_RAVEN_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
deleted file mode 100644
index 91e96af88bd8..000000000000
--- a/include/asm-ppc/reg_booke.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * Contains register definitions common to the Book E PowerPC
- * specification. Notice that while the IBM-40x series of CPUs
- * are not true Book E PowerPCs, they borrowed a number of features
- * before Book E was finalized, and are included here as well. Unfortunatly,
- * they sometimes used different locations than true Book E CPUs did.
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PPC_REG_BOOKE_H__
-#define __ASM_PPC_REG_BOOKE_H__
-
-#ifndef __ASSEMBLY__
-/* Performance Monitor Registers */
-#define mfpmr(rn) ({unsigned int rval; \
- asm volatile("mfpmr %0," __stringify(rn) \
- : "=r" (rval)); rval;})
-#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
-#endif /* __ASSEMBLY__ */
-
-/* Freescale Book E Performance Monitor APU Registers */
-#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
-#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
-#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
-#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
-#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
-#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
-#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
-#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
-
-#define PMLCA_FC 0x80000000 /* Freeze Counter */
-#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
-#define PMLCA_FCU 0x20000000 /* Freeze in User */
-#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
-#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
-#define PMLCA_CE 0x04000000 /* Condition Enable */
-
-#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
-#define PMLCA_EVENT_SHIFT 16
-
-#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
-#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
-#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
-#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
-
-#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
-#define PMLCB_THRESHMUL_SHIFT 8
-
-#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
-#define PMLCB_THRESHOLD_SHIFT 0
-
-#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
-
-#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
-#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
-#define PMGC0_FCECE 0x20000000 /* Freeze countes on
- Enabled Condition or
- Event */
-
-#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
-#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
-#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
-#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
-#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
-#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
-#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
-#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
-#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
-#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
-
-
-/* Machine State Register (MSR) Fields */
-#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
-#define MSR_SPE (1<<25) /* Enable SPE */
-#define MSR_DWE (1<<10) /* Debug Wait Enable */
-#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */
-#define MSR_IS MSR_IR /* Instruction Space */
-#define MSR_DS MSR_DR /* Data Space */
-#define MSR_PMM (1<<2) /* Performance monitor mark bit */
-
-/* Default MSR for kernel mode. */
-#if defined (CONFIG_40x)
-#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#elif defined(CONFIG_BOOKE)
-#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE)
-#endif
-
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */
-#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */
-#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */
-#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */
-#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */
-#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */
-#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */
-#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */
-#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */
-#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */
-#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */
-#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */
-#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */
-#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */
-#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */
-#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */
-#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */
-#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */
-#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */
-#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */
-#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */
-#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */
-#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */
-#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */
-#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */
-#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */
-#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */
-#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */
-#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */
-#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */
-#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */
-#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */
-#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
-#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
-#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
-#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
-#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
-#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
-#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
-#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
-#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
-#define SPRN_MCSR 0x23C /* Machine Check Status Register */
-#define SPRN_MCAR 0x23D /* Machine Check Address Register */
-#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */
-#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */
-#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
-#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
-#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
-#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */
-#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
-#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
-#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
-#define SPRN_MAS7 0x3b0 /* MMU Assist Register 7 */
-#define SPRN_PID1 0x279 /* Process ID Register 1 */
-#define SPRN_PID2 0x27A /* Process ID Register 2 */
-#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
-#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
-#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
-#define SPRN_MMUCR 0x3B2 /* MMU Control Register */
-#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
-#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
-#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
-#define SPRN_SLER 0x3BB /* Little-endian real mode */
-#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */
-#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
-#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
-#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
-#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
-#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
-#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
-#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
-#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
-#define SPRN_SVR 0x3FF /* System Version Register */
-
-/*
- * SPRs which have conflicting definitions on true Book E versus classic,
- * or IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define SPRN_PID 0x030 /* Process ID */
-#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
-#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */
-#define SPRN_DEAR 0x03D /* Data Error Address Register */
-#define SPRN_ESR 0x03E /* Exception Syndrome Register */
-#define SPRN_PIR 0x11E /* Processor Identification Register */
-#define SPRN_DBSR 0x130 /* Debug Status Register */
-#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */
-#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */
-#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */
-#define SPRN_DAC1 0x13C /* Data Address Compare 1 */
-#define SPRN_DAC2 0x13D /* Data Address Compare 2 */
-#define SPRN_TSR 0x150 /* Timer Status Register */
-#define SPRN_TCR 0x154 /* Timer Control Register */
-#endif /* Book E */
-#ifdef CONFIG_40x
-#define SPRN_PID 0x3B1 /* Process ID */
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
-#define SPRN_TCR 0x3DA /* Timer Control Register */
-#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
-#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
-#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
-#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */
-#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */
-#endif
-
-/* Bit definitions for CCR1. */
-#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
-#define CCR1_TCS 0x00000080 /* Timer Clock Select */
-
-/* Bit definitions for the MCSR. */
-#ifdef CONFIG_4xx
-#define MCSR_MCS 0x80000000 /* Machine Check Summary */
-#define MCSR_IB 0x40000000 /* Instruction PLB Error */
-#define MCSR_DRB 0x20000000 /* Data Read PLB Error */
-#define MCSR_DWB 0x10000000 /* Data Write PLB Error */
-#define MCSR_TLBP 0x08000000 /* TLB Parity Error */
-#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */
-#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */
-#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */
-#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */
-#endif
-
-/* Bit definitions for the DBSR. */
-/*
- * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
- */
-#ifdef CONFIG_BOOKE
-#define DBSR_IC 0x08000000 /* Instruction Completion */
-#define DBSR_BT 0x04000000 /* Branch Taken */
-#define DBSR_TIE 0x01000000 /* Trap Instruction Event */
-#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */
-#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */
-#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */
-#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */
-#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */
-#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */
-#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */
-#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */
-#endif
-#ifdef CONFIG_40x
-#define DBSR_IC 0x80000000 /* Instruction Completion */
-#define DBSR_BT 0x40000000 /* Branch taken */
-#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
-#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */
-#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */
-#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */
-#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */
-#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */
-#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */
-#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */
-#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */
-#endif
-
-/* Bit definitions related to the ESR. */
-#define ESR_MCI 0x80000000 /* Machine Check - Instruction */
-#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
-#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
-#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
-#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
-#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
-#define ESR_PTR 0x02000000 /* Program Exception - Trap */
-#define ESR_FP 0x01000000 /* Floating Point Operation */
-#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
-#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
-#define ESR_ST 0x00800000 /* Store Operation */
-#define ESR_DLK 0x00200000 /* Data Cache Locking */
-#define ESR_ILK 0x00100000 /* Instr. Cache Locking */
-#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */
-#define ESR_BO 0x00020000 /* Byte Ordering */
-
-/* Bit definitions related to the DBCR0. */
-#define DBCR0_EDM 0x80000000 /* External Debug Mode */
-#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
-#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
-#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
-#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
-#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
-#define DBCR0_RST_NONE 0x00000000 /* No Reset */
-#define DBCR0_IC 0x08000000 /* Instruction Completion */
-#define DBCR0_BT 0x04000000 /* Branch Taken */
-#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
-#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
-#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
-#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
-#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
-#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
-#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
-#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
-#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
-#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
-#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
-
-/* Bit definitions related to the TCR. */
-#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
-#define TCR_WP_MASK TCR_WP(3)
-#define WP_2_17 0 /* 2^17 clocks */
-#define WP_2_21 1 /* 2^21 clocks */
-#define WP_2_25 2 /* 2^25 clocks */
-#define WP_2_29 3 /* 2^29 clocks */
-#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
-#define TCR_WRC_MASK TCR_WRC(3)
-#define WRC_NONE 0 /* No reset will occur */
-#define WRC_CORE 1 /* Core reset will occur */
-#define WRC_CHIP 2 /* Chip reset will occur */
-#define WRC_SYSTEM 3 /* System reset will occur */
-#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */
-#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
-#define TCR_FP_MASK TCR_FP(3)
-#define FP_2_9 0 /* 2^9 clocks */
-#define FP_2_13 1 /* 2^13 clocks */
-#define FP_2_17 2 /* 2^17 clocks */
-#define FP_2_21 3 /* 2^21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-
-/* Bit definitions for the TSR. */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
-#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE 0 /* No WDT reset occurred */
-#define WRS_CORE 1 /* WDT forced core reset */
-#define WRS_CHIP 2 /* WDT forced chip reset */
-#define WRS_SYSTEM 3 /* WDT forced system reset */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_DIS TSR_PIS /* DEC Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
-
-/* Bit definitions for the DCCR. */
-#define DCCR_NOCACHE 0 /* Noncacheable */
-#define DCCR_CACHE 1 /* Cacheable */
-
-/* Bit definitions for DCWR. */
-#define DCWR_COPY 0 /* Copy-back */
-#define DCWR_WRITE 1 /* Write-through */
-
-/* Bit definitions for ICCR. */
-#define ICCR_NOCACHE 0 /* Noncacheable */
-#define ICCR_CACHE 1 /* Cacheable */
-
-/* Bit definitions for L1CSR0. */
-#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */
-#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
-#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */
-#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */
-
-/* Bit definitions for L1CSR1. */
-#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */
-#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
-#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
-
-/* Bit definitions for SGR. */
-#define SGR_NORMAL 0 /* Speculative fetching allowed. */
-#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
-
-/* Bit definitions for SPEFSCR. */
-#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
-#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
-#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
-#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
-#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
-#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
-#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
-#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
-#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
-#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
-#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
-#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
-#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
-#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
-#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
-#define SPEFSCR_OV 0x00004000 /* Integer overflow */
-#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
-#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
-#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
-#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
-#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
-#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
-#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
-#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
-#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
-#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
-#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
-#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
-
-/*
- * The IBM-403 is an even more odd special case, as it is much
- * older than the IBM-405 series. We put these down here incase someone
- * wishes to support these machines again.
- */
-#ifdef CONFIG_403GCX
-/* Special Purpose Registers (SPRNs)*/
-#define SPRN_TBHU 0x3CC /* Time Base High User-mode */
-#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
-#define SPRN_TBHI 0x3DC /* Time Base High */
-#define SPRN_TBLO 0x3DD /* Time Base Low */
-#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
-
-
-/* Bit definitions for the DBCR. */
-#define DBCR_EDM DBCR0_EDM
-#define DBCR_IDM DBCR0_IDM
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */
-#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */
-#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */
-#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
-#endif /* 403GCX */
-#endif /* __ASM_PPC_REG_BOOKE_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/residual.h b/include/asm-ppc/residual.h
deleted file mode 100644
index 934810d25667..000000000000
--- a/include/asm-ppc/residual.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/* 7/18/95 */
-/*----------------------------------------------------------------------------*/
-/* Residual Data header definitions and prototypes */
-/*----------------------------------------------------------------------------*/
-
-/* Structure map for RESIDUAL on PowerPC Reference Platform */
-/* residual.h - Residual data structure passed in r3. */
-/* Load point passed in r4 to boot image. */
-/* For enum's: if given in hex then they are bit significant, */
-/* i.e. only one bit is on for each enum */
-/* Reserved fields must be filled with zeros. */
-
-#ifdef __KERNEL__
-#ifndef _RESIDUAL_
-#define _RESIDUAL_
-
-#ifndef __ASSEMBLY__
-
-#define MAX_CPUS 32 /* These should be set to the maximum */
-#define MAX_MEMS 64 /* number possible for this system. */
-#define MAX_DEVICES 256 /* Changing these will change the */
-#define AVE_PNP_SIZE 32 /* structure, hence the version of */
-#define MAX_MEM_SEGS 64 /* this header file. */
-
-/*----------------------------------------------------------------------------*/
-/* Public structures... */
-/*----------------------------------------------------------------------------*/
-
-#include <asm/pnp.h>
-
-typedef enum _L1CACHE_TYPE {
- NoneCAC = 0,
- SplitCAC = 1,
- CombinedCAC = 2
- } L1CACHE_TYPE;
-
-typedef enum _TLB_TYPE {
- NoneTLB = 0,
- SplitTLB = 1,
- CombinedTLB = 2
- } TLB_TYPE;
-
-typedef enum _FIRMWARE_SUPPORT {
- Conventional = 0x01,
- OpenFirmware = 0x02,
- Diagnostics = 0x04,
- LowDebug = 0x08,
- Multiboot = 0x10,
- LowClient = 0x20,
- Hex41 = 0x40,
- FAT = 0x80,
- ISO9660 = 0x0100,
- SCSI_InitiatorID_Override = 0x0200,
- Tape_Boot = 0x0400,
- FW_Boot_Path = 0x0800
- } FIRMWARE_SUPPORT;
-
-typedef enum _FIRMWARE_SUPPLIERS {
- IBMFirmware = 0x00,
- MotoFirmware = 0x01, /* 7/18/95 */
- FirmWorks = 0x02, /* 10/5/95 */
- Bull = 0x03, /* 04/03/96 */
- } FIRMWARE_SUPPLIERS;
-
-typedef enum _ENDIAN_SWITCH_METHODS {
- UsePort92 = 0x01,
- UsePCIConfigA8 = 0x02,
- UseFF001030 = 0x03,
- } ENDIAN_SWITCH_METHODS;
-
-typedef enum _SPREAD_IO_METHODS {
- UsePort850 = 0x00,
-/*UsePCIConfigA8 = 0x02,*/
- } SPREAD_IO_METHODS;
-
-typedef struct _VPD {
-
- /* Box dependent stuff */
- unsigned char PrintableModel[32]; /* Null terminated string.
- Must be of the form:
- vvv,<20h>,<model designation>,<0x0>
- where vvv is the vendor ID
- e.g. IBM PPS MODEL 6015<0x0> */
- unsigned char Serial[16]; /* 12/94:
- Serial Number; must be of the form:
- vvv<serial number> where vvv is the
- vendor ID.
- e.g. IBM60151234567<20h><20h> */
- unsigned char Reserved[48];
- unsigned long FirmwareSupplier; /* See FirmwareSuppliers enum */
- unsigned long FirmwareSupports; /* See FirmwareSupport enum */
- unsigned long NvramSize; /* Size of nvram in bytes */
- unsigned long NumSIMMSlots;
- unsigned short EndianSwitchMethod; /* See EndianSwitchMethods enum */
- unsigned short SpreadIOMethod; /* See SpreadIOMethods enum */
- unsigned long SmpIar;
- unsigned long RAMErrLogOffset; /* Heap offset to error log */
- unsigned long Reserved5;
- unsigned long Reserved6;
- unsigned long ProcessorHz; /* Processor clock frequency in Hertz */
- unsigned long ProcessorBusHz; /* Processor bus clock frequency */
- unsigned long Reserved7;
- unsigned long TimeBaseDivisor; /* (Bus clocks per timebase tic)*1000 */
- unsigned long WordWidth; /* Word width in bits */
- unsigned long PageSize; /* Page size in bytes */
- unsigned long CoherenceBlockSize; /* Unit of transfer in/out of cache
- for which coherency is maintained;
- normally <= CacheLineSize. */
- unsigned long GranuleSize; /* Unit of lock allocation to avoid */
- /* false sharing of locks. */
-
- /* L1 Cache variables */
- unsigned long CacheSize; /* L1 Cache size in KB. This is the */
- /* total size of the L1, whether */
- /* combined or split */
- unsigned long CacheAttrib; /* L1CACHE_TYPE */
- unsigned long CacheAssoc; /* L1 Cache associativity. Use this
- for combined cache. If split, put
- zeros here. */
- unsigned long CacheLineSize; /* L1 Cache line size in bytes. Use
- for combined cache. If split, put
- zeros here. */
- /* For split L1 Cache: (= combined if combined cache) */
- unsigned long I_CacheSize;
- unsigned long I_CacheAssoc;
- unsigned long I_CacheLineSize;
- unsigned long D_CacheSize;
- unsigned long D_CacheAssoc;
- unsigned long D_CacheLineSize;
-
- /* Translation Lookaside Buffer variables */
- unsigned long TLBSize; /* Total number of TLBs on the system */
- unsigned long TLBAttrib; /* Combined I+D or split TLB */
- unsigned long TLBAssoc; /* TLB Associativity. Use this for
- combined TLB. If split, put zeros
- here. */
- /* For split TLB: (= combined if combined TLB) */
- unsigned long I_TLBSize;
- unsigned long I_TLBAssoc;
- unsigned long D_TLBSize;
- unsigned long D_TLBAssoc;
-
- unsigned long ExtendedVPD; /* Offset to extended VPD area;
- null if unused */
- } VPD;
-
-typedef enum _DEVICE_FLAGS {
- Enabled = 0x4000, /* 1 - PCI device is enabled */
- Integrated = 0x2000,
- Failed = 0x1000, /* 1 - device failed POST code tests */
- Static = 0x0800, /* 0 - dynamically configurable
- 1 - static */
- Dock = 0x0400, /* 0 - not a docking station device
- 1 - is a docking station device */
- Boot = 0x0200, /* 0 - device cannot be used for BOOT
- 1 - can be a BOOT device */
- Configurable = 0x0100, /* 1 - device is configurable */
- Disableable = 0x80, /* 1 - device can be disabled */
- PowerManaged = 0x40, /* 0 - not managed; 1 - managed */
- ReadOnly = 0x20, /* 1 - device is read only */
- Removable = 0x10, /* 1 - device is removable */
- ConsoleIn = 0x08,
- ConsoleOut = 0x04,
- Input = 0x02,
- Output = 0x01
- } DEVICE_FLAGS;
-
-typedef enum _BUS_ID {
- ISADEVICE = 0x01,
- EISADEVICE = 0x02,
- PCIDEVICE = 0x04,
- PCMCIADEVICE = 0x08,
- PNPISADEVICE = 0x10,
- MCADEVICE = 0x20,
- MXDEVICE = 0x40, /* Devices on mezzanine bus */
- PROCESSORDEVICE = 0x80, /* Devices on processor bus */
- VMEDEVICE = 0x100,
- } BUS_ID;
-
-typedef struct _DEVICE_ID {
- unsigned long BusId; /* See BUS_ID enum above */
- unsigned long DevId; /* Big Endian format */
- unsigned long SerialNum; /* For multiple usage of a single
- DevId */
- unsigned long Flags; /* See DEVICE_FLAGS enum above */
- unsigned char BaseType; /* See pnp.h for bit definitions */
- unsigned char SubType; /* See pnp.h for bit definitions */
- unsigned char Interface; /* See pnp.h for bit definitions */
- unsigned char Spare;
- } DEVICE_ID;
-
-typedef union _BUS_ACCESS {
- struct _PnPAccess{
- unsigned char CSN;
- unsigned char LogicalDevNumber;
- unsigned short ReadDataPort;
- } PnPAccess;
- struct _ISAAccess{
- unsigned char SlotNumber; /* ISA Slot Number generally not
- available; 0 if unknown */
- unsigned char LogicalDevNumber;
- unsigned short ISAReserved;
- } ISAAccess;
- struct _MCAAccess{
- unsigned char SlotNumber;
- unsigned char LogicalDevNumber;
- unsigned short MCAReserved;
- } MCAAccess;
- struct _PCMCIAAccess{
- unsigned char SlotNumber;
- unsigned char LogicalDevNumber;
- unsigned short PCMCIAReserved;
- } PCMCIAAccess;
- struct _EISAAccess{
- unsigned char SlotNumber;
- unsigned char FunctionNumber;
- unsigned short EISAReserved;
- } EISAAccess;
- struct _PCIAccess{
- unsigned char BusNumber;
- unsigned char DevFuncNumber;
- unsigned short PCIReserved;
- } PCIAccess;
- struct _ProcBusAccess{
- unsigned char BusNumber;
- unsigned char BUID;
- unsigned short ProcBusReserved;
- } ProcBusAccess;
- } BUS_ACCESS;
-
-/* Per logical device information */
-typedef struct _PPC_DEVICE {
- DEVICE_ID DeviceId;
- BUS_ACCESS BusAccess;
-
- /* The following three are offsets into the DevicePnPHeap */
- /* All are in PnP compressed format */
- unsigned long AllocatedOffset; /* Allocated resource description */
- unsigned long PossibleOffset; /* Possible resource description */
- unsigned long CompatibleOffset; /* Compatible device identifiers */
- } PPC_DEVICE;
-
-typedef enum _CPU_STATE {
- CPU_GOOD = 0, /* CPU is present, and active */
- CPU_GOOD_FW = 1, /* CPU is present, and in firmware */
- CPU_OFF = 2, /* CPU is present, but inactive */
- CPU_FAILED = 3, /* CPU is present, but failed POST */
- CPU_NOT_PRESENT = 255 /* CPU not present */
- } CPU_STATE;
-
-typedef struct _PPC_CPU {
- unsigned long CpuType; /* Result of mfspr from Processor
- Version Register (PVR).
- PVR(0-15) = Version (e.g. 601)
- PVR(16-31 = EC Level */
- unsigned char CpuNumber; /* CPU Number for this processor */
- unsigned char CpuState; /* CPU State, see CPU_STATE enum */
- unsigned short Reserved;
- } PPC_CPU;
-
-typedef struct _PPC_MEM {
- unsigned long SIMMSize; /* 0 - absent or bad
- 8M, 32M (in MB) */
- } PPC_MEM;
-
-typedef enum _MEM_USAGE {
- Other = 0x8000,
- ResumeBlock = 0x4000, /* for use by power management */
- SystemROM = 0x2000, /* Flash memory (populated) */
- UnPopSystemROM = 0x1000, /* Unpopulated part of SystemROM area */
- IOMemory = 0x0800,
- SystemIO = 0x0400,
- SystemRegs = 0x0200,
- PCIAddr = 0x0100,
- PCIConfig = 0x80,
- ISAAddr = 0x40,
- Unpopulated = 0x20, /* Unpopulated part of System Memory */
- Free = 0x10, /* Free part of System Memory */
- BootImage = 0x08, /* BootImage part of System Memory */
- FirmwareCode = 0x04, /* FirmwareCode part of System Memory */
- FirmwareHeap = 0x02, /* FirmwareHeap part of System Memory */
- FirmwareStack = 0x01 /* FirmwareStack part of System Memory*/
- } MEM_USAGE;
-
-typedef struct _MEM_MAP {
- unsigned long Usage; /* See MEM_USAGE above */
- unsigned long BasePage; /* Page number measured in 4KB pages */
- unsigned long PageCount; /* Page count measured in 4KB pages */
- } MEM_MAP;
-
-typedef struct _RESIDUAL {
- unsigned long ResidualLength; /* Length of Residual */
- unsigned char Version; /* of this data structure */
- unsigned char Revision; /* of this data structure */
- unsigned short EC; /* of this data structure */
- /* VPD */
- VPD VitalProductData;
- /* CPU */
- unsigned short MaxNumCpus; /* Max CPUs in this system */
- unsigned short ActualNumCpus; /* ActualNumCpus < MaxNumCpus means */
- /* that there are unpopulated or */
- /* otherwise unusable cpu locations */
- PPC_CPU Cpus[MAX_CPUS];
- /* Memory */
- unsigned long TotalMemory; /* Total amount of memory installed */
- unsigned long GoodMemory; /* Total amount of good memory */
- unsigned long ActualNumMemSegs;
- MEM_MAP Segs[MAX_MEM_SEGS];
- unsigned long ActualNumMemories;
- PPC_MEM Memories[MAX_MEMS];
- /* Devices */
- unsigned long ActualNumDevices;
- PPC_DEVICE Devices[MAX_DEVICES];
- unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE];
- } RESIDUAL;
-
-
-/*
- * Forward declaration - we can't include <linux/pci.h> because it
- * breaks the boot loader
- */
-struct pci_dev;
-
-extern RESIDUAL *res;
-extern void print_residual_device_info(void);
-extern PPC_DEVICE *residual_find_device(unsigned long BusMask,
- unsigned char * DevID, int BaseType,
- int SubType, int Interface, int n);
-extern int residual_pcidev_irq(struct pci_dev *dev);
-extern void residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern unsigned int residual_isapic_addr(void);
-extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag,
- int n);
-extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p,
- unsigned packet_type,
- int n);
-extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p,
- unsigned packet_type,
- int n);
-
-#ifdef CONFIG_PREP_RESIDUAL
-#define have_residual_data (res && res->ResidualLength)
-#else
-#define have_residual_data 0
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* ndef _RESIDUAL_ */
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/rtc.h b/include/asm-ppc/rtc.h
deleted file mode 100644
index 6025b46d0a2a..000000000000
--- a/include/asm-ppc/rtc.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * include/asm-ppc/rtc.h
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on:
- * include/asm-m68k/rtc.h
- *
- * Copyright Richard Zidlicky
- * implementation details for genrtc/q40rtc driver
- *
- * And the old drivers/macintosh/rtc.c which was heavily based on:
- * Linux/SPARC Real Time Clock Driver
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- *
- * With additional work by Paul Mackerras and Franz Sirl.
- */
-
-#ifndef __ASM_RTC_H__
-#define __ASM_RTC_H__
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/time.h>
-
-#define RTC_PIE 0x40 /* periodic interrupt enable */
-#define RTC_AIE 0x20 /* alarm interrupt enable */
-#define RTC_UIE 0x10 /* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100 /* battery bad */
-#define RTC_SQWE 0x08 /* enable square-wave output */
-#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
-#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
- if (ppc_md.get_rtc_time) {
- unsigned long nowtime;
-
- nowtime = (ppc_md.get_rtc_time)();
-
- to_tm(nowtime, time);
-
- time->tm_year -= 1900;
- time->tm_mon -= 1; /* Make sure userland has a 0-based month */
- }
- return RTC_24H;
-}
-
-/* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
-{
- if (ppc_md.get_rtc_time) {
- unsigned long nowtime;
-
- nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
- time->tm_mday, time->tm_hour, time->tm_min,
- time->tm_sec);
-
- (ppc_md.set_rtc_time)(nowtime);
-
- return 0;
- } else
- return -EINVAL;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
- struct rtc_time h;
-
- get_rtc_time(&h);
- return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_RTC_H__ */
diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
deleted file mode 100644
index d35ed10315b1..000000000000
--- a/include/asm-ppc/serial.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/asm-ppc/serial.h
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SERIAL_H__
-#define __ASM_SERIAL_H__
-
-
-#if defined(CONFIG_EV64260)
-#include <platforms/ev64260.h>
-#elif defined(CONFIG_CHESTNUT)
-#include <platforms/chestnut.h>
-#elif defined(CONFIG_POWERPMC250)
-#include <platforms/powerpmc250.h>
-#elif defined(CONFIG_LOPEC)
-#include <platforms/lopec.h>
-#elif defined(CONFIG_MVME5100)
-#include <platforms/mvme5100.h>
-#elif defined(CONFIG_PAL4)
-#include <platforms/pal4_serial.h>
-#elif defined(CONFIG_PRPMC750)
-#include <platforms/prpmc750.h>
-#elif defined(CONFIG_PRPMC800)
-#include <platforms/prpmc800.h>
-#elif defined(CONFIG_SANDPOINT)
-#include <platforms/sandpoint.h>
-#elif defined(CONFIG_SPRUCE)
-#include <platforms/spruce.h>
-#elif defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_RADSTONE_PPC7D)
-#include <platforms/radstone_ppc7d.h>
-#else
-
-/*
- * XXX Assume it has PC-style ISA serial ports - true for PReP at least.
- */
-#include <asm/pc_serial.h>
-
-#endif /* !CONFIG_GEMINI and others */
-#endif /* __ASM_SERIAL_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/smp.h b/include/asm-ppc/smp.h
deleted file mode 100644
index e75791ea33a6..000000000000
--- a/include/asm-ppc/smp.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* smp.h: PPC specific SMP stuff.
- *
- * Original was a copy of sparc smp.h. Now heavily modified
- * for PPC.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
- */
-#ifdef __KERNEL__
-#ifndef _PPC_SMP_H
-#define _PPC_SMP_H
-
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/cpumask.h>
-#include <linux/threads.h>
-
-#ifdef CONFIG_SMP
-
-#ifndef __ASSEMBLY__
-
-struct cpuinfo_PPC {
- unsigned long loops_per_jiffy;
- unsigned long pvr;
- unsigned long *pgd_cache;
- unsigned long *pte_cache;
- unsigned long pgtable_cache_sz;
-};
-
-extern struct cpuinfo_PPC cpu_data[];
-extern cpumask_t cpu_online_map;
-extern cpumask_t cpu_possible_map;
-extern unsigned long smp_proc_in_lock[];
-extern volatile unsigned long cpu_callin_map[];
-extern int smp_tb_synchronized;
-extern struct smp_ops_t *smp_ops;
-
-extern void smp_send_tlb_invalidate(int);
-extern void smp_send_xmon_break(int cpu);
-struct pt_regs;
-extern void smp_message_recv(int);
-
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-extern void cpu_die(void) __attribute__((noreturn));
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-extern int __cpu_up(unsigned int cpu);
-
-extern int smp_hw_index[];
-#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
-#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)])
-#define set_hard_smp_processor_id(cpu, phys)\
- (smp_hw_index[(cpu)] = (phys))
-
-#endif /* __ASSEMBLY__ */
-
-#else /* !(CONFIG_SMP) */
-
-static inline void cpu_die(void) { }
-#define get_hard_smp_processor_id(cpu) 0
-#define set_hard_smp_processor_id(cpu, phys)
-#define hard_smp_processor_id() 0
-
-#endif /* !(CONFIG_SMP) */
-
-#ifndef __ASSEMBLY__
-extern int boot_cpuid;
-extern int boot_cpuid_phys;
-#endif
-
-#endif /* !(_PPC_SMP_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/spinlock.h b/include/asm-ppc/spinlock.h
deleted file mode 100644
index fccaf5531e57..000000000000
--- a/include/asm-ppc/spinlock.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#include <asm/system.h>
-
-/*
- * Simple spin lock operations.
- *
- * (the type definitions are in asm/raw_spinlock_types.h)
- */
-
-#define __raw_spin_is_locked(x) ((x)->slock != 0)
-#define __raw_spin_unlock_wait(lock) \
- do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
- unsigned long tmp;
-
- __asm__ __volatile__(
- "b 1f # __raw_spin_lock\n\
-2: lwzx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne+ 2b\n\
-1: lwarx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne- 2b\n"
- PPC405_ERR77(0,%1)
-" stwcx. %2,0,%1\n\
- bne- 2b\n\
- isync"
- : "=&r"(tmp)
- : "r"(&lock->slock), "r"(1)
- : "cr0", "memory");
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
- __asm__ __volatile__("eieio # __raw_spin_unlock": : :"memory");
- lock->slock = 0;
-}
-
-#define __raw_spin_trylock(l) (!test_and_set_bit(0,(volatile unsigned long *)(&(l)->slock)))
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- */
-
-#define __raw_read_can_lock(rw) ((rw)->lock >= 0)
-#define __raw_write_can_lock(rw) (!(rw)->lock)
-
-static __inline__ int __raw_read_trylock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
-"2: lwarx %0,0,%1 # read_trylock\n\
- addic. %0,%0,1\n\
- ble- 1f\n"
- PPC405_ERR77(0,%1)
-" stwcx. %0,0,%1\n\
- bne- 2b\n\
- isync\n\
-1:"
- : "=&r"(tmp)
- : "r"(&rw->lock)
- : "cr0", "memory");
-
- return tmp > 0;
-}
-
-static __inline__ void __raw_read_lock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
- "b 2f # read_lock\n\
-1: lwzx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- blt+ 1b\n\
-2: lwarx %0,0,%1\n\
- addic. %0,%0,1\n\
- ble- 1b\n"
- PPC405_ERR77(0,%1)
-" stwcx. %0,0,%1\n\
- bne- 2b\n\
- isync"
- : "=&r"(tmp)
- : "r"(&rw->lock)
- : "cr0", "memory");
-}
-
-static __inline__ void __raw_read_unlock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
- "eieio # read_unlock\n\
-1: lwarx %0,0,%1\n\
- addic %0,%0,-1\n"
- PPC405_ERR77(0,%1)
-" stwcx. %0,0,%1\n\
- bne- 1b"
- : "=&r"(tmp)
- : "r"(&rw->lock)
- : "cr0", "memory");
-}
-
-static __inline__ int __raw_write_trylock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
-"2: lwarx %0,0,%1 # write_trylock\n\
- cmpwi 0,%0,0\n\
- bne- 1f\n"
- PPC405_ERR77(0,%1)
-" stwcx. %2,0,%1\n\
- bne- 2b\n\
- isync\n\
-1:"
- : "=&r"(tmp)
- : "r"(&rw->lock), "r"(-1)
- : "cr0", "memory");
-
- return tmp == 0;
-}
-
-static __inline__ void __raw_write_lock(raw_rwlock_t *rw)
-{
- signed int tmp;
-
- __asm__ __volatile__(
- "b 2f # write_lock\n\
-1: lwzx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne+ 1b\n\
-2: lwarx %0,0,%1\n\
- cmpwi 0,%0,0\n\
- bne- 1b\n"
- PPC405_ERR77(0,%1)
-" stwcx. %2,0,%1\n\
- bne- 2b\n\
- isync"
- : "=&r"(tmp)
- : "r"(&rw->lock), "r"(-1)
- : "cr0", "memory");
-}
-
-static __inline__ void __raw_write_unlock(raw_rwlock_t *rw)
-{
- __asm__ __volatile__("eieio # write_unlock": : :"memory");
- rw->lock = 0;
-}
-
-#define _raw_spin_relax(lock) cpu_relax()
-#define _raw_read_relax(lock) cpu_relax()
-#define _raw_write_relax(lock) cpu_relax()
-
-#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-ppc/suspend.h b/include/asm-ppc/suspend.h
deleted file mode 100644
index 3df9f32bd834..000000000000
--- a/include/asm-ppc/suspend.h
+++ /dev/null
@@ -1,12 +0,0 @@
-static inline int arch_prepare_suspend(void)
-{
- return 0;
-}
-
-static inline void save_processor_state(void)
-{
-}
-
-static inline void restore_processor_state(void)
-{
-}
diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h
deleted file mode 100644
index 70ebd333c55b..000000000000
--- a/include/asm-ppc/system.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- */
-#ifndef __PPC_SYSTEM_H
-#define __PPC_SYSTEM_H
-
-#include <linux/kernel.h>
-
-#include <asm/hw_irq.h>
-
-/*
- * Memory barrier.
- * The sync instruction guarantees that all memory accesses initiated
- * by this processor have been performed (with respect to all other
- * mechanisms that access memory). The eieio instruction is a barrier
- * providing an ordering (separately) for (a) cacheable stores and (b)
- * loads and stores to non-cacheable memory (e.g. I/O devices).
- *
- * mb() prevents loads and stores being reordered across this point.
- * rmb() prevents loads being reordered across this point.
- * wmb() prevents stores being reordered across this point.
- * read_barrier_depends() prevents data-dependent loads being reordered
- * across this point (nop on PPC).
- *
- * We can use the eieio instruction for wmb, but since it doesn't
- * give any ordering guarantees about loads, we have to use the
- * stronger but slower sync instruction for mb and rmb.
- */
-#define mb() __asm__ __volatile__ ("sync" : : : "memory")
-#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
-#define wmb() __asm__ __volatile__ ("eieio" : : : "memory")
-#define read_barrier_depends() do { } while(0)
-
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-
-#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() __asm__ __volatile__ ("eieio" : : : "memory")
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-#endif /* CONFIG_SMP */
-
-#ifdef __KERNEL__
-struct task_struct;
-struct pt_regs;
-
-extern void print_backtrace(unsigned long *);
-extern void show_regs(struct pt_regs * regs);
-extern void flush_instruction_cache(void);
-extern void hard_reset_now(void);
-extern void poweroff_now(void);
-extern int set_dabr(unsigned long dabr);
-#ifdef CONFIG_6xx
-extern long _get_L2CR(void);
-extern long _get_L3CR(void);
-extern void _set_L2CR(unsigned long);
-extern void _set_L3CR(unsigned long);
-#else
-#define _get_L2CR() 0L
-#define _get_L3CR() 0L
-#define _set_L2CR(val) do { } while(0)
-#define _set_L3CR(val) do { } while(0)
-#endif
-extern void via_cuda_init(void);
-extern void pmac_nvram_init(void);
-extern void chrp_nvram_init(void);
-extern void read_rtc_time(void);
-extern void pmac_find_display(void);
-extern void giveup_fpu(struct task_struct *);
-extern void disable_kernel_fp(void);
-extern void enable_kernel_fp(void);
-extern void flush_fp_to_thread(struct task_struct *);
-extern void enable_kernel_altivec(void);
-extern void giveup_altivec(struct task_struct *);
-extern void load_up_altivec(struct task_struct *);
-extern int emulate_altivec(struct pt_regs *);
-extern void giveup_spe(struct task_struct *);
-extern void load_up_spe(struct task_struct *);
-extern int fix_alignment(struct pt_regs *);
-extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
-extern void cvt_df(double *from, float *to, struct thread_struct *thread);
-
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ALTIVEC
-extern void flush_altivec_to_thread(struct task_struct *);
-#else
-static inline void flush_altivec_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-#ifdef CONFIG_SPE
-extern void flush_spe_to_thread(struct task_struct *);
-#else
-static inline void flush_spe_to_thread(struct task_struct *t)
-{
-}
-#endif
-
-extern int call_rtas(const char *, int, int, unsigned long *, ...);
-extern void cacheable_memzero(void *p, unsigned int nb);
-extern void *cacheable_memcpy(void *, const void *, unsigned int);
-extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
-extern void bad_page_fault(struct pt_regs *, unsigned long, int);
-extern int die(const char *, struct pt_regs *, long);
-extern void _exception(int, struct pt_regs *, int, unsigned long);
-void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
-
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
-struct device_node;
-extern void note_scsi_host(struct device_node *, void *);
-
-extern struct task_struct *__switch_to(struct task_struct *,
- struct task_struct *);
-#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next)))
-
-struct thread_struct;
-extern struct task_struct *_switch(struct thread_struct *prev,
- struct thread_struct *next);
-
-extern unsigned int rtas_data;
-
-static __inline__ unsigned long
-xchg_u32(volatile void *p, unsigned long val)
-{
- unsigned long prev;
-
- __asm__ __volatile__ ("\n\
-1: lwarx %0,0,%2 \n"
- PPC405_ERR77(0,%2)
-" stwcx. %3,0,%2 \n\
- bne- 1b"
- : "=&r" (prev), "=m" (*(volatile unsigned long *)p)
- : "r" (p), "r" (val), "m" (*(volatile unsigned long *)p)
- : "cc", "memory");
-
- return prev;
-}
-
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid xchg().
- */
-extern void __xchg_called_with_bad_pointer(void);
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
- switch (size) {
- case 4:
- return (unsigned long) xchg_u32(ptr, x);
-#if 0 /* xchg_u64 doesn't exist on 32-bit PPC */
- case 8:
- return (unsigned long) xchg_u64(ptr, x);
-#endif /* 0 */
- }
- __xchg_called_with_bad_pointer();
- return x;
-
-
-}
-
-static inline void * xchg_ptr(void * m, void * val)
-{
- return (void *) xchg_u32(m, (unsigned long) val);
-}
-
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static __inline__ unsigned long
-__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
-{
- unsigned int prev;
-
- __asm__ __volatile__ ("\n\
-1: lwarx %0,0,%2 \n\
- cmpw 0,%0,%3 \n\
- bne 2f \n"
- PPC405_ERR77(0,%2)
-" stwcx. %4,0,%2 \n\
- bne- 1b\n"
-#ifdef CONFIG_SMP
-" sync\n"
-#endif /* CONFIG_SMP */
-"2:"
- : "=&r" (prev), "=m" (*p)
- : "r" (p), "r" (old), "r" (new), "m" (*p)
- : "cc", "memory");
-
- return prev;
-}
-
-static inline unsigned long
-__cmpxchg_u32_local(volatile unsigned int *p, unsigned int old,
- unsigned int new)
-{
- unsigned int prev;
-
- __asm__ __volatile__ ("\n\
-1: lwarx %0,0,%2 \n\
- cmpw 0,%0,%3 \n\
- bne 2f \n"
- PPC405_ERR77(0,%2)
-" stwcx. %4,0,%2 \n\
- bne- 1b\n"
-"2:"
- : "=&r" (prev), "=m" (*p)
- : "r" (p), "r" (old), "r" (new), "m" (*p)
- : "cc", "memory");
-
- return prev;
-}
-
-/* This function doesn't exist, so you'll get a linker error
- if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __inline__ unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
- unsigned int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32(ptr, old, new);
-#if 0 /* we don't have __cmpxchg_u64 on 32-bit PPC */
- case 8:
- return __cmpxchg_u64(ptr, old, new);
-#endif /* 0 */
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-#define cmpxchg(ptr, o, n) \
- ({ \
- __typeof__(*(ptr)) _o_ = (o); \
- __typeof__(*(ptr)) _n_ = (n); \
- (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
- (unsigned long)_n_, sizeof(*(ptr))); \
- })
-
-#include <asm-generic/cmpxchg-local.h>
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
- unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32_local(ptr, old, new);
- default:
- return __cmpxchg_local_generic(ptr, old, new, size);
- }
-
- return old;
-}
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#define arch_align_stack(x) (x)
-
-#endif /* __KERNEL__ */
-#endif /* __PPC_SYSTEM_H */
diff --git a/include/asm-ppc/time.h b/include/asm-ppc/time.h
deleted file mode 100644
index 81dbcd43a501..000000000000
--- a/include/asm-ppc/time.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Common time prototypes and such for all ppc machines.
- *
- * Written by Cort Dougan (cort@fsmlabs.com) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_TIME_H__
-#define __ASM_TIME_H__
-
-#include <linux/types.h>
-#include <linux/rtc.h>
-#include <linux/threads.h>
-
-#include <asm/reg.h>
-
-/* time.c */
-extern unsigned tb_ticks_per_jiffy;
-extern unsigned tb_to_us;
-extern unsigned tb_last_stamp;
-extern unsigned long disarm_decr[NR_CPUS];
-
-extern void to_tm(int tim, struct rtc_time * tm);
-extern time_t last_rtc_update;
-
-extern void set_dec_cpu6(unsigned int val);
-
-int via_calibrate_decr(void);
-
-/* Accessor functions for the decrementer register.
- * The 4xx doesn't even have a decrementer. I tried to use the
- * generic timer interrupt code, which seems OK, with the 4xx PIT
- * in auto-reload mode. The problem is PIT stops counting when it
- * hits zero. If it would wrap, we could use it just like a decrementer.
- */
-static __inline__ unsigned int get_dec(void)
-{
-#if defined(CONFIG_40x)
- return (mfspr(SPRN_PIT));
-#else
- return (mfspr(SPRN_DEC));
-#endif
-}
-
-static __inline__ void set_dec(unsigned int val)
-{
-#if defined(CONFIG_40x)
- return; /* Have to let it auto-reload */
-#elif defined(CONFIG_8xx_CPU6)
- set_dec_cpu6(val);
-#else
- mtspr(SPRN_DEC, val);
-#endif
-}
-
-/* Accessor functions for the timebase (RTC on 601) registers. */
-/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
-#ifdef CONFIG_6xx
-extern __inline__ int __pure __USE_RTC(void) {
- return (mfspr(SPRN_PVR)>>16) == 1;
-}
-#else
-#define __USE_RTC() 0
-#endif
-
-extern __inline__ unsigned long get_tbl(void) {
- unsigned long tbl;
-#if defined(CONFIG_403GCX)
- asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
-#else
- asm volatile("mftb %0" : "=r" (tbl));
-#endif
- return tbl;
-}
-
-extern __inline__ unsigned long get_tbu(void) {
- unsigned long tbl;
-#if defined(CONFIG_403GCX)
- asm volatile("mfspr %0, 0x3dc" : "=r" (tbl));
-#else
- asm volatile("mftbu %0" : "=r" (tbl));
-#endif
- return tbl;
-}
-
-extern __inline__ void set_tb(unsigned int upper, unsigned int lower)
-{
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, upper);
- mtspr(SPRN_TBWL, lower);
-}
-
-extern __inline__ unsigned long get_rtcl(void) {
- unsigned long rtcl;
- asm volatile("mfrtcl %0" : "=r" (rtcl));
- return rtcl;
-}
-
-extern __inline__ unsigned long get_rtcu(void)
-{
- unsigned long rtcu;
- asm volatile("mfrtcu %0" : "=r" (rtcu));
- return rtcu;
-}
-
-extern __inline__ unsigned get_native_tbl(void) {
- if (__USE_RTC())
- return get_rtcl();
- else
- return get_tbl();
-}
-
-/* On machines with RTC, this function can only be used safely
- * after the timestamp and for 1 second. It is only used by gettimeofday
- * however so it should not matter.
- */
-extern __inline__ unsigned tb_ticks_since(unsigned tstamp) {
- if (__USE_RTC()) {
- int delta = get_rtcl() - tstamp;
- return delta<0 ? delta + 1000000000 : delta;
- } else {
- return get_tbl() - tstamp;
- }
-}
-
-#if 0
-extern __inline__ unsigned long get_bin_rtcl(void) {
- unsigned long rtcl, rtcu1, rtcu2;
- asm volatile("\
-1: mfrtcu %0\n\
- mfrtcl %1\n\
- mfrtcu %2\n\
- cmpw %0,%2\n\
- bne- 1b\n"
- : "=r" (rtcu1), "=r" (rtcl), "=r" (rtcu2)
- : : "cr0");
- return rtcu2*1000000000+rtcl;
-}
-
-extern __inline__ unsigned binary_tbl(void) {
- if (__USE_RTC())
- return get_bin_rtcl();
- else
- return get_tbl();
-}
-#endif
-
-/* Use mulhwu to scale processor timebase to timeval */
-/* Specifically, this computes (x * y) / 2^32. -- paulus */
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-unsigned mulhwu_scale_factor(unsigned, unsigned);
-
-#define account_process_vtime(tsk) do { } while (0)
-#define calculate_steal_time() do { } while (0)
-#define snapshot_timebases() do { } while (0)
-
-#endif /* __ASM_TIME_H__ */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc/todc.h b/include/asm-ppc/todc.h
deleted file mode 100644
index 937c7dbe6e5c..000000000000
--- a/include/asm-ppc/todc.h
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * Definitions for the M48Txx and mc146818 series of Time of day/Real Time
- * Clock chips.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips.
- * Purpose is to make one generic file that handles all of these chips instead
- * of every platform implementing the same code over & over again.
- */
-
-#ifndef __PPC_KERNEL_TODC_H
-#define __PPC_KERNEL_TODC_H
-
-typedef struct {
- uint rtc_type; /* your particular chip */
-
- /*
- * Following are the addresses of the AS0, AS1, and DATA registers
- * of these chips. Note that these are board-specific.
- */
- unsigned int nvram_as0;
- unsigned int nvram_as1;
- unsigned int nvram_data;
-
- /*
- * Define bits to stop external set of regs from changing so
- * the chip can be read/written reliably.
- */
- unsigned char enable_read;
- unsigned char enable_write;
-
- /*
- * Following is the number of AS0 address bits. This is normally
- * 8 but some bad hardware routes address lines incorrectly.
- */
- int as0_bits;
-
- int nvram_size; /* Size of NVRAM on chip */
- int sw_flags; /* Software control flags */
-
- /* Following are the register offsets for the particular chip */
- int year;
- int month;
- int day_of_month;
- int day_of_week;
- int hours;
- int minutes;
- int seconds;
- int control_b;
- int control_a;
- int watchdog;
- int interrupts;
- int alarm_date;
- int alarm_hour;
- int alarm_minutes;
- int alarm_seconds;
- int century;
- int flags;
-
- /*
- * Some RTC chips have their NVRAM buried behind a addr/data pair of
- * regs on the first level/clock registers. The following fields
- * are the addresses for those addr/data regs.
- */
- int nvram_addr_reg;
- int nvram_data_reg;
-} todc_info_t;
-
-/*
- * Define the types of TODC/RTC variants that are supported in
- * arch/ppc/kernel/todc_time.c
- * Make a new one of these for any chip somehow differs from what's already
- * defined. That way, if you ever need to put in code to touch those
- * bits/registers in todc_time.c, you can put it inside an
- * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break
- * anyone else.
- */
-#define TODC_TYPE_MK48T35 1
-#define TODC_TYPE_MK48T37 2
-#define TODC_TYPE_MK48T59 3
-#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */
-#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */
-#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */
-#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */
-#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */
-#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */
-#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */
-#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */
-#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */
-#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */
-#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */
-
-/*
- * Bit to clear/set to enable reads/writes to the chip
- */
-#define TODC_MK48TXX_CNTL_A_R 0x40
-#define TODC_MK48TXX_CNTL_A_W 0x80
-#define TODC_MK48TXX_DAY_CB 0x80
-
-#define TODC_DS1501_CNTL_B_TE 0x80
-
-/*
- * Define flag bits used by todc routines.
- */
-#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001
-
-/*
- * Define the values for the various RTC's that should to into the todc_info
- * table.
- * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only
- * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set.
- */
-#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8
-#define TODC_TYPE_MK48T35_SW_FLAGS 0
-#define TODC_TYPE_MK48T35_YEAR 0x7fff
-#define TODC_TYPE_MK48T35_MONTH 0x7ffe
-#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */
-#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */
-#define TODC_TYPE_MK48T35_HOURS 0x7ffb
-#define TODC_TYPE_MK48T35_MINUTES 0x7ffa
-#define TODC_TYPE_MK48T35_SECONDS 0x7ff9
-#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9
-#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8
-#define TODC_TYPE_MK48T35_WATCHDOG 0x0000
-#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000
-#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000
-#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000
-#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000
-#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000
-#define TODC_TYPE_MK48T35_CENTURY 0x0000
-#define TODC_TYPE_MK48T35_FLAGS 0x0000
-#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0
-#define TODC_TYPE_MK48T37_SW_FLAGS 0
-#define TODC_TYPE_MK48T37_YEAR 0x7fff
-#define TODC_TYPE_MK48T37_MONTH 0x7ffe
-#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */
-#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */
-#define TODC_TYPE_MK48T37_HOURS 0x7ffb
-#define TODC_TYPE_MK48T37_MINUTES 0x7ffa
-#define TODC_TYPE_MK48T37_SECONDS 0x7ff9
-#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9
-#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8
-#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7
-#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6
-#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5
-#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4
-#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3
-#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2
-#define TODC_TYPE_MK48T37_CENTURY 0x7ff1
-#define TODC_TYPE_MK48T37_FLAGS 0x7ff0
-#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0
-#define TODC_TYPE_MK48T59_SW_FLAGS 0
-#define TODC_TYPE_MK48T59_YEAR 0x1fff
-#define TODC_TYPE_MK48T59_MONTH 0x1ffe
-#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_MK48T59_HOURS 0x1ffb
-#define TODC_TYPE_MK48T59_MINUTES 0x1ffa
-#define TODC_TYPE_MK48T59_SECONDS 0x1ff9
-#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9
-#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8
-#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff
-#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff
-#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff
-#define TODC_TYPE_MK48T59_CENTURY 0x1fff
-#define TODC_TYPE_MK48T59_FLAGS 0x1fff
-#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100
-#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
-#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06)
-#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05)
-#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04)
-#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03)
-#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02)
-#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01)
-#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00)
-#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
-#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f)
-#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
-#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
-#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b)
-#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a)
-#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09)
-#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08)
-#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07)
-#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff)
-#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10
-#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13
-
-#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0
-#define TODC_TYPE_DS1553_SW_FLAGS 0
-#define TODC_TYPE_DS1553_YEAR 0x1fff
-#define TODC_TYPE_DS1553_MONTH 0x1ffe
-#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_DS1553_HOURS 0x1ffb
-#define TODC_TYPE_DS1553_MINUTES 0x1ffa
-#define TODC_TYPE_DS1553_SECONDS 0x1ff9
-#define TODC_TYPE_DS1553_CNTL_B 0x1ff9
-#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7
-#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6
-#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5
-#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4
-#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3
-#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2
-#define TODC_TYPE_DS1553_CENTURY 0x1ff8
-#define TODC_TYPE_DS1553_FLAGS 0x1ff0
-#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0
-#define TODC_TYPE_DS1557_SW_FLAGS 0
-#define TODC_TYPE_DS1557_YEAR 0x7ffff
-#define TODC_TYPE_DS1557_MONTH 0x7fffe
-#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */
-#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */
-#define TODC_TYPE_DS1557_HOURS 0x7fffb
-#define TODC_TYPE_DS1557_MINUTES 0x7fffa
-#define TODC_TYPE_DS1557_SECONDS 0x7fff9
-#define TODC_TYPE_DS1557_CNTL_B 0x7fff9
-#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7
-#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6
-#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5
-#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4
-#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3
-#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2
-#define TODC_TYPE_DS1557_CENTURY 0x7fff8
-#define TODC_TYPE_DS1557_FLAGS 0x7fff0
-#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8
-#define TODC_TYPE_DS1643_SW_FLAGS 0
-#define TODC_TYPE_DS1643_YEAR 0x1fff
-#define TODC_TYPE_DS1643_MONTH 0x1ffe
-#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_DS1643_HOURS 0x1ffb
-#define TODC_TYPE_DS1643_MINUTES 0x1ffa
-#define TODC_TYPE_DS1643_SECONDS 0x1ff9
-#define TODC_TYPE_DS1643_CNTL_B 0x1ff9
-#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1643_WATCHDOG 0x1fff
-#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff
-#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff
-#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff
-#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff
-#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff
-#define TODC_TYPE_DS1643_CENTURY 0x1ff8
-#define TODC_TYPE_DS1643_FLAGS 0x1fff
-#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */
-#define TODC_TYPE_DS1693_SW_FLAGS 0
-#define TODC_TYPE_DS1693_YEAR 0x09
-#define TODC_TYPE_DS1693_MONTH 0x08
-#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */
-#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */
-#define TODC_TYPE_DS1693_HOURS 0x04
-#define TODC_TYPE_DS1693_MINUTES 0x02
-#define TODC_TYPE_DS1693_SECONDS 0x00
-#define TODC_TYPE_DS1693_CNTL_B 0x0b
-#define TODC_TYPE_DS1693_CNTL_A 0x0a
-#define TODC_TYPE_DS1693_WATCHDOG 0xff
-#define TODC_TYPE_DS1693_INTERRUPTS 0xff
-#define TODC_TYPE_DS1693_ALARM_DATE 0x49
-#define TODC_TYPE_DS1693_ALARM_HOUR 0x05
-#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03
-#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01
-#define TODC_TYPE_DS1693_CENTURY 0x48
-#define TODC_TYPE_DS1693_FLAGS 0xff
-#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8
-#define TODC_TYPE_DS1743_SW_FLAGS 0
-#define TODC_TYPE_DS1743_YEAR 0x1fff
-#define TODC_TYPE_DS1743_MONTH 0x1ffe
-#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */
-#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */
-#define TODC_TYPE_DS1743_HOURS 0x1ffb
-#define TODC_TYPE_DS1743_MINUTES 0x1ffa
-#define TODC_TYPE_DS1743_SECONDS 0x1ff9
-#define TODC_TYPE_DS1743_CNTL_B 0x1ff9
-#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1743_WATCHDOG 0x1fff
-#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff
-#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff
-#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff
-#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff
-#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff
-#define TODC_TYPE_DS1743_CENTURY 0x1ff8
-#define TODC_TYPE_DS1743_FLAGS 0x1fff
-#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8
-#define TODC_TYPE_DS1746_SW_FLAGS 0
-#define TODC_TYPE_DS1746_YEAR 0x1ffff
-#define TODC_TYPE_DS1746_MONTH 0x1fffe
-#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */
-#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */
-#define TODC_TYPE_DS1746_HOURS 0x1fffb
-#define TODC_TYPE_DS1746_MINUTES 0x1fffa
-#define TODC_TYPE_DS1746_SECONDS 0x1fff9
-#define TODC_TYPE_DS1746_CNTL_B 0x1fff9
-#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1746_WATCHDOG 0x00000
-#define TODC_TYPE_DS1746_INTERRUPTS 0x00000
-#define TODC_TYPE_DS1746_ALARM_DATE 0x00000
-#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000
-#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000
-#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000
-#define TODC_TYPE_DS1746_CENTURY 0x00000
-#define TODC_TYPE_DS1746_FLAGS 0x00000
-#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8
-#define TODC_TYPE_DS1747_SW_FLAGS 0
-#define TODC_TYPE_DS1747_YEAR 0x7ffff
-#define TODC_TYPE_DS1747_MONTH 0x7fffe
-#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */
-#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */
-#define TODC_TYPE_DS1747_HOURS 0x7fffb
-#define TODC_TYPE_DS1747_MINUTES 0x7fffa
-#define TODC_TYPE_DS1747_SECONDS 0x7fff9
-#define TODC_TYPE_DS1747_CNTL_B 0x7fff9
-#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */
-#define TODC_TYPE_DS1747_WATCHDOG 0x00000
-#define TODC_TYPE_DS1747_INTERRUPTS 0x00000
-#define TODC_TYPE_DS1747_ALARM_DATE 0x00000
-#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000
-#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000
-#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000
-#define TODC_TYPE_DS1747_CENTURY 0x00000
-#define TODC_TYPE_DS1747_FLAGS 0x00000
-#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0
-#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */
-#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM
-#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00)
-#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01)
-#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02)
-#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03)
-#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04)
-#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05)
-#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06)
-#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07)
-#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08)
-#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09)
-#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A)
-#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B)
-#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C)
-#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D)
-#define TODC_TYPE_DS17285_WATCHDOG 0
-#define TODC_TYPE_DS17285_INTERRUPTS 0
-#define TODC_TYPE_DS17285_ALARM_DATE 0
-#define TODC_TYPE_DS17285_CENTURY 0
-#define TODC_TYPE_DS17285_FLAGS 0
-#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50
-#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53
-
-#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */
-#define TODC_TYPE_MC146818_SW_FLAGS 0
-#define TODC_TYPE_MC146818_YEAR 0x09
-#define TODC_TYPE_MC146818_MONTH 0x08
-#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */
-#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */
-#define TODC_TYPE_MC146818_HOURS 0x04
-#define TODC_TYPE_MC146818_MINUTES 0x02
-#define TODC_TYPE_MC146818_SECONDS 0x00
-#define TODC_TYPE_MC146818_CNTL_B 0x0a
-#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */
-#define TODC_TYPE_MC146818_WATCHDOG 0
-#define TODC_TYPE_MC146818_INTERRUPTS 0x0c
-#define TODC_TYPE_MC146818_ALARM_DATE 0xff
-#define TODC_TYPE_MC146818_ALARM_HOUR 0x05
-#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03
-#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01
-#define TODC_TYPE_MC146818_CENTURY 0xff
-#define TODC_TYPE_MC146818_FLAGS 0xff
-#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0
-#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0
-
-#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */
-#define TODC_TYPE_PC97307_SW_FLAGS 0
-#define TODC_TYPE_PC97307_YEAR 0x09
-#define TODC_TYPE_PC97307_MONTH 0x08
-#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */
-#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */
-#define TODC_TYPE_PC97307_HOURS 0x04
-#define TODC_TYPE_PC97307_MINUTES 0x02
-#define TODC_TYPE_PC97307_SECONDS 0x00
-#define TODC_TYPE_PC97307_CNTL_B 0x0a
-#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */
-#define TODC_TYPE_PC97307_WATCHDOG 0x0c
-#define TODC_TYPE_PC97307_INTERRUPTS 0x0d
-#define TODC_TYPE_PC97307_ALARM_DATE 0xff
-#define TODC_TYPE_PC97307_ALARM_HOUR 0x05
-#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03
-#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01
-#define TODC_TYPE_PC97307_CENTURY 0xff
-#define TODC_TYPE_PC97307_FLAGS 0xff
-#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0
-#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0
-
-/*
- * Define macros to allocate and init the todc_info_t table that will
- * be used by the todc_time.c routines.
- */
-#define TODC_ALLOC() \
- static todc_info_t todc_info_alloc; \
- todc_info_t *todc_info = &todc_info_alloc;
-
-#define TODC_INIT(clock_type, as0, as1, data, bits) { \
- todc_info->rtc_type = clock_type; \
- \
- todc_info->nvram_as0 = (unsigned int)(as0); \
- todc_info->nvram_as1 = (unsigned int)(as1); \
- todc_info->nvram_data = (unsigned int)(data); \
- \
- todc_info->as0_bits = (bits); \
- \
- todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \
- todc_info->sw_flags = clock_type ##_SW_FLAGS; \
- \
- todc_info->year = clock_type ##_YEAR; \
- todc_info->month = clock_type ##_MONTH; \
- todc_info->day_of_month = clock_type ##_DOM; \
- todc_info->day_of_week = clock_type ##_DOW; \
- todc_info->hours = clock_type ##_HOURS; \
- todc_info->minutes = clock_type ##_MINUTES; \
- todc_info->seconds = clock_type ##_SECONDS; \
- todc_info->control_b = clock_type ##_CNTL_B; \
- todc_info->control_a = clock_type ##_CNTL_A; \
- todc_info->watchdog = clock_type ##_WATCHDOG; \
- todc_info->interrupts = clock_type ##_INTERRUPTS; \
- todc_info->alarm_date = clock_type ##_ALARM_DATE; \
- todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \
- todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \
- todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \
- todc_info->century = clock_type ##_CENTURY; \
- todc_info->flags = clock_type ##_FLAGS; \
- \
- todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \
- todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \
-}
-
-extern todc_info_t *todc_info;
-
-unsigned char todc_direct_read_val(int addr);
-void todc_direct_write_val(int addr, unsigned char val);
-unsigned char todc_m48txx_read_val(int addr);
-void todc_m48txx_write_val(int addr, unsigned char val);
-unsigned char todc_mc146818_read_val(int addr);
-void todc_mc146818_write_val(int addr, unsigned char val);
-
-long todc_time_init(void);
-unsigned long todc_get_rtc_time(void);
-int todc_set_rtc_time(unsigned long nowtime);
-void todc_calibrate_decr(void);
-
-#endif /* __PPC_KERNEL_TODC_H */
diff --git a/include/asm-ppc/traps.h b/include/asm-ppc/traps.h
deleted file mode 100644
index 68e7326b56f1..000000000000
--- a/include/asm-ppc/traps.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/traps.h>
diff --git a/include/asm-ppc/zorro.h b/include/asm-ppc/zorro.h
deleted file mode 100644
index 1e5fbc65e77b..000000000000
--- a/include/asm-ppc/zorro.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _ASM_PPC_ZORRO_H
-#define _ASM_PPC_ZORRO_H
-
-#include <asm/io.h>
-
-#define z_readb in_8
-#define z_readw in_be16
-#define z_readl in_be32
-
-#define z_writeb(val, port) out_8((port), (val))
-#define z_writew(val, port) out_be16((port), (val))
-#define z_writel(val, port) out_be32((port), (val))
-
-#define z_memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-extern void *__ioremap(unsigned long address, unsigned long size,
- unsigned long flags);
-
-extern void *ioremap(unsigned long address, unsigned long size);
-extern void iounmap(void *addr);
-
-extern void *__ioremap(unsigned long address, unsigned long size,
- unsigned long flags);
-
-#define z_ioremap ioremap
-#define z_iounmap iounmap
-
-#endif /* _ASM_PPC_ZORRO_H */