diff options
Diffstat (limited to 'drivers/net/phy/at803x.c')
| -rw-r--r-- | drivers/net/phy/at803x.c | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 59fe356942b5..11ebd59bf2eb 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -115,6 +115,7 @@ #define AT803X_DEBUG_REG_HIB_CTRL 0x0b #define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10) #define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13) +#define AT803X_DEBUG_HIB_CTRL_PS_HIB_EN BIT(15) #define AT803X_DEBUG_REG_3C 0x3C @@ -192,6 +193,9 @@ #define AT803X_KEEP_PLL_ENABLED BIT(0) #define AT803X_DISABLE_SMARTEEE BIT(1) +/* disable hibernation mode */ +#define AT803X_DISABLE_HIBERNATION_MODE BIT(2) + /* ADC threshold */ #define QCA808X_PHY_DEBUG_ADC_THRESHOLD 0x2c80 #define QCA808X_ADC_THRESHOLD_MASK GENMASK(7, 0) @@ -730,6 +734,9 @@ static int at803x_parse_dt(struct phy_device *phydev) if (of_property_read_bool(node, "qca,disable-smarteee")) priv->flags |= AT803X_DISABLE_SMARTEEE; + if (of_property_read_bool(node, "qca,disable-hibernation-mode")) + priv->flags |= AT803X_DISABLE_HIBERNATION_MODE; + if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) { if (!tw || tw > 255) { phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n"); @@ -999,6 +1006,20 @@ static int at8031_pll_config(struct phy_device *phydev) AT803X_DEBUG_PLL_ON, 0); } +static int at803x_hibernation_mode_config(struct phy_device *phydev) +{ + struct at803x_priv *priv = phydev->priv; + + /* The default after hardware reset is hibernation mode enabled. After + * software reset, the value is retained. + */ + if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE)) + return 0; + + return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL, + AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0); +} + static int at803x_config_init(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; @@ -1051,6 +1072,10 @@ static int at803x_config_init(struct phy_device *phydev) if (ret < 0) return ret; + ret = at803x_hibernation_mode_config(phydev); + if (ret < 0) + return ret; + /* Ar803x extended next page bit is enabled by default. Cisco * multigig switches read this bit and attempt to negotiate 10Gbps * rates even if the next page bit is disabled. This is incorrect |