diff options
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/broadcom/tg3.c | 10 | ||||
| -rw-r--r-- | drivers/net/ethernet/dec/tulip/interrupt.c | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/emulex/benet/be_main.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/renesas/sh_eth.c | 19 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/davinci_mdio.c | 14 |
6 files changed, 38 insertions, 16 deletions
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 0f493c8dc28b..c777b9013164 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1800,6 +1800,9 @@ static int tg3_poll_fw(struct tg3 *tp) int i; u32 val; + if (tg3_flag(tp, NO_FWARE_REPORTED)) + return 0; + if (tg3_flag(tp, IS_SSB_CORE)) { /* We don't use firmware. */ return 0; @@ -10404,6 +10407,13 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) */ static int tg3_init_hw(struct tg3 *tp, bool reset_phy) { + /* Chip may have been just powered on. If so, the boot code may still + * be running initialization. Wait for it to finish to avoid races in + * accessing the hardware. + */ + tg3_enable_register_access(tp); + tg3_poll_fw(tp); + tg3_switch_clocks(tp); tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c index 28a5e425fecf..92306b320840 100644 --- a/drivers/net/ethernet/dec/tulip/interrupt.c +++ b/drivers/net/ethernet/dec/tulip/interrupt.c @@ -76,6 +76,12 @@ int tulip_refill_rx(struct net_device *dev) mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&tp->pdev->dev, mapping)) { + dev_kfree_skb(skb); + tp->rx_buffers[entry].skb = NULL; + break; + } + tp->rx_buffers[entry].mapping = mapping; tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping); diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 8bc1b21b1c79..a0b4be51f0d1 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4262,6 +4262,9 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) netdev->features |= NETIF_F_HIGHDMA; } else { status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (!status) + status = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); if (status) { dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); goto free_netdev; diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 42e9dd05c936..5e3982fc5398 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev) mdelay(1); cnt--; } - if (cnt < 0) { - pr_err("Device reset fail\n"); + if (cnt <= 0) { + pr_err("Device reset failed\n"); ret = -ETIMEDOUT; } return ret; @@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status) desc_status = edmac_to_cpu(mdp, rxdesc->status); pkt_len = rxdesc->frame_length; -#if defined(CONFIG_ARCH_R8A7740) - desc_status >>= 16; -#endif - if (--boguscnt < 0) break; if (!(desc_status & RDFEND)) ndev->stats.rx_length_errors++; +#if defined(CONFIG_ARCH_R8A7740) + /* + * In case of almost all GETHER/ETHERs, the Receive Frame State + * (RFS) bits in the Receive Descriptor 0 are from bit 9 to + * bit 0. However, in case of the R8A7740's GETHER, the RFS + * bits are from bit 25 to bit 16. So, the driver needs right + * shifting by 16. + */ + desc_status >>= 16; +#endif + if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 | RD_RFS5 | RD_RFS6 | RD_RFS10)) { ndev->stats.rx_errors++; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 618446ae1ec1..ee919ca8b8a0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1899,7 +1899,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) #ifdef STMMAC_XMIT_DEBUG if (netif_msg_pktdata(priv)) { - pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d" + pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d", __func__, (priv->cur_tx % txsize), (priv->dirty_tx % txsize), entry, first, nfrags); if (priv->extend_desc) diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 12aec173564c..c47f0dbcebb5 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -449,10 +449,9 @@ static int davinci_mdio_suspend(struct device *dev) __raw_writel(ctrl, &data->regs->control); wait_for_idle(data); - pm_runtime_put_sync(data->dev); - data->suspended = true; spin_unlock(&data->lock); + pm_runtime_put_sync(data->dev); return 0; } @@ -460,15 +459,12 @@ static int davinci_mdio_suspend(struct device *dev) static int davinci_mdio_resume(struct device *dev) { struct davinci_mdio_data *data = dev_get_drvdata(dev); - u32 ctrl; - spin_lock(&data->lock); pm_runtime_get_sync(data->dev); + spin_lock(&data->lock); /* restart the scan state machine */ - ctrl = __raw_readl(&data->regs->control); - ctrl |= CONTROL_ENABLE; - __raw_writel(ctrl, &data->regs->control); + __davinci_mdio_reset(data); data->suspended = false; spin_unlock(&data->lock); @@ -477,8 +473,8 @@ static int davinci_mdio_resume(struct device *dev) } static const struct dev_pm_ops davinci_mdio_pm_ops = { - .suspend = davinci_mdio_suspend, - .resume = davinci_mdio_resume, + .suspend_late = davinci_mdio_suspend, + .resume_early = davinci_mdio_resume, }; static const struct of_device_id davinci_mdio_of_mtable[] = { |