summaryrefslogtreecommitdiff
path: root/drivers/misc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc')
-rw-r--r--drivers/misc/Kconfig10
-rw-r--r--drivers/misc/Makefile3
-rw-r--r--drivers/misc/atmel-ssc.c2
-rw-r--r--drivers/misc/dell-laptop.c436
-rw-r--r--drivers/misc/eeprom/Kconfig59
-rw-r--r--drivers/misc/eeprom/Makefile4
-rw-r--r--drivers/misc/eeprom/at24.c582
-rw-r--r--drivers/misc/eeprom/at25.c389
-rw-r--r--drivers/misc/eeprom/eeprom.c257
-rw-r--r--drivers/misc/eeprom/eeprom_93cx6.c (renamed from drivers/misc/eeprom_93cx6.c)0
-rw-r--r--drivers/misc/hpilo.c8
-rw-r--r--drivers/misc/hpilo.h2
-rw-r--r--drivers/misc/sgi-xp/xpc.h5
-rw-r--r--drivers/misc/sgi-xp/xpc_channel.c3
-rw-r--r--drivers/misc/sgi-xp/xpc_sn2.c36
-rw-r--r--drivers/misc/sgi-xp/xpc_uv.c13
-rw-r--r--drivers/misc/sgi-xp/xpnet.c3
17 files changed, 1335 insertions, 477 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 419c378bd24b..c64e6798878a 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -87,14 +87,6 @@ config PHANTOM
If you choose to build module, its name will be phantom. If unsure,
say N here.
-config EEPROM_93CX6
- tristate "EEPROM 93CX6 support"
- ---help---
- This is a driver for the EEPROM chipsets 93c46 and 93c66.
- The driver supports both read as well as write commands.
-
- If unsure, say N.
-
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
depends on PCI
@@ -225,11 +217,13 @@ config DELL_LAPTOP
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL
+ depends on POWER_SUPPLY
default n
---help---
This driver adds support for rfkill and backlight control to Dell
laptops.
source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 9cf8ae6e4b39..bc1199830554 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -10,14 +10,13 @@ obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
-obj-$(CONFIG_DELL_LAPTOP) += dell-laptop.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_PHANTOM) += phantom.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
-obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_C2PORT) += c2port/
+obj-y += eeprom/
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index bf5e4d065436..558bf3f2c276 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -35,7 +35,7 @@ struct ssc_device *ssc_request(unsigned int ssc_num)
if (!ssc_valid) {
spin_unlock(&user_lock);
- dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
+ pr_err("ssc: ssc%d platform device is missing\n", ssc_num);
return ERR_PTR(-ENODEV);
}
diff --git a/drivers/misc/dell-laptop.c b/drivers/misc/dell-laptop.c
deleted file mode 100644
index 4d33a2068b7a..000000000000
--- a/drivers/misc/dell-laptop.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Driver for Dell laptop extras
- *
- * Copyright (c) Red Hat <mjg@redhat.com>
- *
- * Based on documentation in the libsmbios package, Copyright (C) 2005 Dell
- * Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/backlight.h>
-#include <linux/err.h>
-#include <linux/dmi.h>
-#include <linux/io.h>
-#include <linux/rfkill.h>
-#include <linux/power_supply.h>
-#include <linux/acpi.h>
-#include "../firmware/dcdbas.h"
-
-#define BRIGHTNESS_TOKEN 0x7d
-
-/* This structure will be modified by the firmware when we enter
- * system management mode, hence the volatiles */
-
-struct calling_interface_buffer {
- u16 class;
- u16 select;
- volatile u32 input[4];
- volatile u32 output[4];
-} __packed;
-
-struct calling_interface_token {
- u16 tokenID;
- u16 location;
- union {
- u16 value;
- u16 stringlength;
- };
-};
-
-struct calling_interface_structure {
- struct dmi_header header;
- u16 cmdIOAddress;
- u8 cmdIOCode;
- u32 supportedCmds;
- struct calling_interface_token tokens[];
-} __packed;
-
-static int da_command_address;
-static int da_command_code;
-static int da_num_tokens;
-static struct calling_interface_token *da_tokens;
-
-static struct backlight_device *dell_backlight_device;
-static struct rfkill *wifi_rfkill;
-static struct rfkill *bluetooth_rfkill;
-static struct rfkill *wwan_rfkill;
-
-static const struct dmi_system_id __initdata dell_device_table[] = {
- {
- .ident = "Dell laptop",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_CHASSIS_TYPE, "8"),
- },
- },
- { }
-};
-
-static void parse_da_table(const struct dmi_header *dm)
-{
- /* Final token is a terminator, so we don't want to copy it */
- int tokens = (dm->length-11)/sizeof(struct calling_interface_token)-1;
- struct calling_interface_structure *table =
- container_of(dm, struct calling_interface_structure, header);
-
- /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least
- 6 bytes of entry */
-
- if (dm->length < 17)
- return;
-
- da_command_address = table->cmdIOAddress;
- da_command_code = table->cmdIOCode;
-
- da_tokens = krealloc(da_tokens, (da_num_tokens + tokens) *
- sizeof(struct calling_interface_token),
- GFP_KERNEL);
-
- if (!da_tokens)
- return;
-
- memcpy(da_tokens+da_num_tokens, table->tokens,
- sizeof(struct calling_interface_token) * tokens);
-
- da_num_tokens += tokens;
-}
-
-static void find_tokens(const struct dmi_header *dm)
-{
- switch (dm->type) {
- case 0xd4: /* Indexed IO */
- break;
- case 0xd5: /* Protected Area Type 1 */
- break;
- case 0xd6: /* Protected Area Type 2 */
- break;
- case 0xda: /* Calling interface */
- parse_da_table(dm);
- break;
- }
-}
-
-static int find_token_location(int tokenid)
-{
- int i;
- for (i = 0; i < da_num_tokens; i++) {
- if (da_tokens[i].tokenID == tokenid)
- return da_tokens[i].location;
- }
-
- return -1;
-}
-
-static struct calling_interface_buffer *
-dell_send_request(struct calling_interface_buffer *buffer, int class,
- int select)
-{
- struct smi_cmd command;
-
- command.magic = SMI_CMD_MAGIC;
- command.command_address = da_command_address;
- command.command_code = da_command_code;
- command.ebx = virt_to_phys(buffer);
- command.ecx = 0x42534931;
-
- buffer->class = class;
- buffer->select = select;
-
- dcdbas_smi_request(&command);
-
- return buffer;
-}
-
-/* Derived from information in DellWirelessCtl.cpp:
- Class 17, select 11 is radio control. It returns an array of 32-bit values.
-
- result[0]: return code
- result[1]:
- Bit 0: Hardware switch supported
- Bit 1: Wifi locator supported
- Bit 2: Wifi is supported
- Bit 3: Bluetooth is supported
- Bit 4: WWAN is supported
- Bit 5: Wireless keyboard supported
- Bits 6-7: Reserved
- Bit 8: Wifi is installed
- Bit 9: Bluetooth is installed
- Bit 10: WWAN is installed
- Bits 11-15: Reserved
- Bit 16: Hardware switch is on
- Bit 17: Wifi is blocked
- Bit 18: Bluetooth is blocked
- Bit 19: WWAN is blocked
- Bits 20-31: Reserved
- result[2]: NVRAM size in bytes
- result[3]: NVRAM format version number
-*/
-
-static int dell_rfkill_set(int radio, enum rfkill_state state)
-{
- struct calling_interface_buffer buffer;
- int disable = (state == RFKILL_STATE_UNBLOCKED) ? 0 : 1;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = (1 | (radio<<8) | (disable << 16));
- dell_send_request(&buffer, 17, 11);
-
- return 0;
-}
-
-static int dell_wifi_set(void *data, enum rfkill_state state)
-{
- return dell_rfkill_set(1, state);
-}
-
-static int dell_bluetooth_set(void *data, enum rfkill_state state)
-{
- return dell_rfkill_set(2, state);
-}
-
-static int dell_wwan_set(void *data, enum rfkill_state state)
-{
- return dell_rfkill_set(3, state);
-}
-
-static int dell_rfkill_get(int bit, enum rfkill_state *state)
-{
- struct calling_interface_buffer buffer;
- int status;
- int new_state = RFKILL_STATE_HARD_BLOCKED;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- dell_send_request(&buffer, 17, 11);
- status = buffer.output[1];
-
- if (status & (1<<16))
- new_state = RFKILL_STATE_SOFT_BLOCKED;
-
- if (status & (1<<bit))
- *state = new_state;
- else
- *state = RFKILL_STATE_UNBLOCKED;
-
- return 0;
-}
-
-static int dell_wifi_get(void *data, enum rfkill_state *state)
-{
- return dell_rfkill_get(17, state);
-}
-
-static int dell_bluetooth_get(void *data, enum rfkill_state *state)
-{
- return dell_rfkill_get(18, state);
-}
-
-static int dell_wwan_get(void *data, enum rfkill_state *state)
-{
- return dell_rfkill_get(19, state);
-}
-
-static int dell_setup_rfkill(void)
-{
- struct calling_interface_buffer buffer;
- int status;
- int ret;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- dell_send_request(&buffer, 17, 11);
- status = buffer.output[1];
-
- if ((status & (1<<2|1<<8)) == (1<<2|1<<8)) {
- wifi_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WLAN);
- if (!wifi_rfkill)
- goto err_wifi;
- wifi_rfkill->name = "dell-wifi";
- wifi_rfkill->toggle_radio = dell_wifi_set;
- wifi_rfkill->get_state = dell_wifi_get;
- ret = rfkill_register(wifi_rfkill);
- if (ret)
- goto err_wifi;
- }
-
- if ((status & (1<<3|1<<9)) == (1<<3|1<<9)) {
- bluetooth_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_BLUETOOTH);
- if (!bluetooth_rfkill)
- goto err_bluetooth;
- bluetooth_rfkill->name = "dell-bluetooth";
- bluetooth_rfkill->toggle_radio = dell_bluetooth_set;
- bluetooth_rfkill->get_state = dell_bluetooth_get;
- ret = rfkill_register(bluetooth_rfkill);
- if (ret)
- goto err_bluetooth;
- }
-
- if ((status & (1<<4|1<<10)) == (1<<4|1<<10)) {
- wwan_rfkill = rfkill_allocate(NULL, RFKILL_TYPE_WWAN);
- if (!wwan_rfkill)
- goto err_wwan;
- wwan_rfkill->name = "dell-wwan";
- wwan_rfkill->toggle_radio = dell_wwan_set;
- wwan_rfkill->get_state = dell_wwan_get;
- ret = rfkill_register(wwan_rfkill);
- if (ret)
- goto err_wwan;
- }
-
- return 0;
-err_wwan:
- if (wwan_rfkill)
- rfkill_free(wwan_rfkill);
- if (bluetooth_rfkill) {
- rfkill_unregister(bluetooth_rfkill);
- bluetooth_rfkill = NULL;
- }
-err_bluetooth:
- if (bluetooth_rfkill)
- rfkill_free(bluetooth_rfkill);
- if (wifi_rfkill) {
- rfkill_unregister(wifi_rfkill);
- wifi_rfkill = NULL;
- }
-err_wifi:
- if (wifi_rfkill)
- rfkill_free(wifi_rfkill);
-
- return ret;
-}
-
-static int dell_send_intensity(struct backlight_device *bd)
-{
- struct calling_interface_buffer buffer;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
- buffer.input[1] = bd->props.brightness;
-
- if (buffer.input[0] == -1)
- return -ENODEV;
-
- if (power_supply_is_system_supplied() > 0)
- dell_send_request(&buffer, 1, 2);
- else
- dell_send_request(&buffer, 1, 1);
-
- return 0;
-}
-
-static int dell_get_intensity(struct backlight_device *bd)
-{
- struct calling_interface_buffer buffer;
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
-
- if (buffer.input[0] == -1)
- return -ENODEV;
-
- if (power_supply_is_system_supplied() > 0)
- dell_send_request(&buffer, 0, 2);
- else
- dell_send_request(&buffer, 0, 1);
-
- return buffer.output[1];
-}
-
-static struct backlight_ops dell_ops = {
- .get_brightness = dell_get_intensity,
- .update_status = dell_send_intensity,
-};
-
-static int __init dell_init(void)
-{
- struct calling_interface_buffer buffer;
- int max_intensity = 0;
- int ret;
-
- if (!dmi_check_system(dell_device_table))
- return -ENODEV;
-
- dmi_walk(find_tokens);
-
- if (!da_tokens) {
- printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n");
- return -ENODEV;
- }
-
- ret = dell_setup_rfkill();
-
- if (ret) {
- printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n");
- goto out;
- }
-
-#ifdef CONFIG_ACPI
- /* In the event of an ACPI backlight being available, don't
- * register the platform controller.
- */
- if (acpi_video_backlight_support())
- return 0;
-#endif
-
- memset(&buffer, 0, sizeof(struct calling_interface_buffer));
- buffer.input[0] = find_token_location(BRIGHTNESS_TOKEN);
-
- if (buffer.input[0] != -1) {
- dell_send_request(&buffer, 0, 2);
- max_intensity = buffer.output[3];
- }
-
- if (max_intensity) {
- dell_backlight_device = backlight_device_register(
- "dell_backlight",
- NULL, NULL,
- &dell_ops);
-
- if (IS_ERR(dell_backlight_device)) {
- ret = PTR_ERR(dell_backlight_device);
- dell_backlight_device = NULL;
- goto out;
- }
-
- dell_backlight_device->props.max_brightness = max_intensity;
- dell_backlight_device->props.brightness =
- dell_get_intensity(dell_backlight_device);
- backlight_update_status(dell_backlight_device);
- }
-
- return 0;
-out:
- if (wifi_rfkill)
- rfkill_unregister(wifi_rfkill);
- if (bluetooth_rfkill)
- rfkill_unregister(bluetooth_rfkill);
- if (wwan_rfkill)
- rfkill_unregister(wwan_rfkill);
- kfree(da_tokens);
- return ret;
-}
-
-static void __exit dell_exit(void)
-{
- backlight_device_unregister(dell_backlight_device);
- if (wifi_rfkill)
- rfkill_unregister(wifi_rfkill);
- if (bluetooth_rfkill)
- rfkill_unregister(bluetooth_rfkill);
- if (wwan_rfkill)
- rfkill_unregister(wwan_rfkill);
-}
-
-module_init(dell_init);
-module_exit(dell_exit);
-
-MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
-MODULE_DESCRIPTION("Dell laptop driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("dmi:*svnDellInc.:*:ct8:*");
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
new file mode 100644
index 000000000000..c76df8cda5ef
--- /dev/null
+++ b/drivers/misc/eeprom/Kconfig
@@ -0,0 +1,59 @@
+menu "EEPROM support"
+
+config EEPROM_AT24
+ tristate "I2C EEPROMs from most vendors"
+ depends on I2C && SYSFS && EXPERIMENTAL
+ help
+ Enable this driver to get read/write support to most I2C EEPROMs,
+ after you configure the driver to know about each EEPROM on
+ your target board. Use these generic chip names, instead of
+ vendor-specific ones like at24c64 or 24lc02:
+
+ 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+ 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+ Unless you like data loss puzzles, always be sure that any chip
+ you configure as a 24c32 (32 kbit) or larger is NOT really a
+ 24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+ as read-only won't help recover from this. Also, if your chip
+ has any software write-protect mechanism you may want to review the
+ code to make sure this driver won't turn it on by accident.
+
+ If you use this with an SMBus adapter instead of an I2C adapter,
+ full functionality is not available. Only smaller devices are
+ supported (24c16 and below, max 4 kByte).
+
+ This driver can also be built as a module. If so, the module
+ will be called at24.
+
+config EEPROM_AT25
+ tristate "SPI EEPROMs from most vendors"
+ depends on SPI && SYSFS
+ help
+ Enable this driver to get read/write support to most SPI EEPROMs,
+ after you configure the board init code to know about each eeprom
+ on your target board.
+
+ This driver can also be built as a module. If so, the module
+ will be called at25.
+
+config EEPROM_LEGACY
+ tristate "Old I2C EEPROM reader"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get read-only access to the EEPROM data
+ available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
+ EEPROMs could theoretically be available on other devices as well.
+
+ This driver can also be built as a module. If so, the module
+ will be called eeprom.
+
+config EEPROM_93CX6
+ tristate "EEPROM 93CX6 support"
+ help
+ This is a driver for the EEPROM chipsets 93c46 and 93c66.
+ The driver supports both read as well as write commands.
+
+ If unsure, say N.
+
+endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
new file mode 100644
index 000000000000..539dd8f88128
--- /dev/null
+++ b/drivers/misc/eeprom/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_EEPROM_AT24) += at24.o
+obj-$(CONFIG_EEPROM_AT25) += at25.o
+obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o
+obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
new file mode 100644
index 000000000000..d4775528abc6
--- /dev/null
+++ b/drivers/misc/eeprom/at24.c
@@ -0,0 +1,582 @@
+/*
+ * at24.c - handle most I2C EEPROMs
+ *
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/mod_devicetable.h>
+#include <linux/log2.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+/*
+ * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
+ * Differences between different vendor product lines (like Atmel AT24C or
+ * MicroChip 24LC, etc) won't much matter for typical read/write access.
+ * There are also I2C RAM chips, likewise interchangeable. One example
+ * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
+ *
+ * However, misconfiguration can lose data. "Set 16-bit memory address"
+ * to a part with 8-bit addressing will overwrite data. Writing with too
+ * big a page size also loses data. And it's not safe to assume that the
+ * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
+ * uses 0x51, for just one example.
+ *
+ * Accordingly, explicit board-specific configuration data should be used
+ * in almost all cases. (One partial exception is an SMBus used to access
+ * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
+ *
+ * So this driver uses "new style" I2C driver binding, expecting to be
+ * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
+ * similar kernel-resident tables; or, configuration data coming from
+ * a bootloader.
+ *
+ * Other than binding model, current differences from "eeprom" driver are
+ * that this one handles write access and isn't restricted to 24c02 devices.
+ * It also handles larger devices (32 kbit and up) with two-byte addresses,
+ * which won't work on pure SMBus systems.
+ */
+
+struct at24_data {
+ struct at24_platform_data chip;
+ bool use_smbus;
+
+ /*
+ * Lock protects against activities from other Linux tasks,
+ * but not from changes by other I2C masters.
+ */
+ struct mutex lock;
+ struct bin_attribute bin;
+
+ u8 *writebuf;
+ unsigned write_max;
+ unsigned num_addresses;
+
+ /*
+ * Some chips tie up multiple I2C addresses; dummy devices reserve
+ * them for us, and we'll use them with SMBus calls.
+ */
+ struct i2c_client *client[];
+};
+
+/*
+ * This parameter is to help this driver avoid blocking other drivers out
+ * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
+ * clock, one 256 byte read takes about 1/43 second which is excessive;
+ * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
+ * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
+ *
+ * This value is forced to be a power of two so that writes align on pages.
+ */
+static unsigned io_limit = 128;
+module_param(io_limit, uint, 0);
+MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
+
+/*
+ * Specs often allow 5 msec for a page write, sometimes 20 msec;
+ * it's important to recover from write timeouts.
+ */
+static unsigned write_timeout = 25;
+module_param(write_timeout, uint, 0);
+MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
+
+#define AT24_SIZE_BYTELEN 5
+#define AT24_SIZE_FLAGS 8
+
+#define AT24_BITMASK(x) (BIT(x) - 1)
+
+/* create non-zero magic value for given eeprom parameters */
+#define AT24_DEVICE_MAGIC(_len, _flags) \
+ ((1 << AT24_SIZE_FLAGS | (_flags)) \
+ << AT24_SIZE_BYTELEN | ilog2(_len))
+
+static const struct i2c_device_id at24_ids[] = {
+ /* needs 8 addresses as A0-A2 are ignored */
+ { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
+ /* old variants can't be handled with this generic entry! */
+ { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
+ { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
+ /* spd is a 24c02 in memory DIMMs */
+ { "spd", AT24_DEVICE_MAGIC(2048 / 8,
+ AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
+ { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
+ /* 24rf08 quirk is handled at i2c-core */
+ { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
+ { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
+ { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
+ { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
+ { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
+ { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
+ { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
+ { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
+ { "at24", 0 },
+ { /* END OF LIST */ }
+};
+MODULE_DEVICE_TABLE(i2c, at24_ids);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This routine supports chips which consume multiple I2C addresses. It
+ * computes the addressing information to be used for a given r/w request.
+ * Assumes that sanity checks for offset happened at sysfs-layer.
+ */
+static struct i2c_client *at24_translate_offset(struct at24_data *at24,
+ unsigned *offset)
+{
+ unsigned i;
+
+ if (at24->chip.flags & AT24_FLAG_ADDR16) {
+ i = *offset >> 16;
+ *offset &= 0xffff;
+ } else {
+ i = *offset >> 8;
+ *offset &= 0xff;
+ }
+
+ return at24->client[i];
+}
+
+static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
+ unsigned offset, size_t count)
+{
+ struct i2c_msg msg[2];
+ u8 msgbuf[2];
+ struct i2c_client *client;
+ int status, i;
+
+ memset(msg, 0, sizeof(msg));
+
+ /*
+ * REVISIT some multi-address chips don't rollover page reads to
+ * the next slave address, so we may need to truncate the count.
+ * Those chips might need another quirk flag.
+ *
+ * If the real hardware used four adjacent 24c02 chips and that
+ * were misconfigured as one 24c08, that would be a similar effect:
+ * one "eeprom" file not four, but larger reads would fail when
+ * they crossed certain pages.
+ */
+
+ /*
+ * Slave address and byte offset derive from the offset. Always
+ * set the byte address; on a multi-master board, another master
+ * may have changed the chip's "current" address pointer.
+ */
+ client = at24_translate_offset(at24, &offset);
+
+ if (count > io_limit)
+ count = io_limit;
+
+ /* Smaller eeproms can work given some SMBus extension calls */
+ if (at24->use_smbus) {
+ if (count > I2C_SMBUS_BLOCK_MAX)
+ count = I2C_SMBUS_BLOCK_MAX;
+ status = i2c_smbus_read_i2c_block_data(client, offset,
+ count, buf);
+ dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
+ count, offset, status);
+ return (status < 0) ? -EIO : status;
+ }
+
+ /*
+ * When we have a better choice than SMBus calls, use a combined
+ * I2C message. Write address; then read up to io_limit data bytes.
+ * Note that read page rollover helps us here (unlike writes).
+ * msgbuf is u8 and will cast to our needs.
+ */
+ i = 0;
+ if (at24->chip.flags & AT24_FLAG_ADDR16)
+ msgbuf[i++] = offset >> 8;
+ msgbuf[i++] = offset;
+
+ msg[0].addr = client->addr;
+ msg[0].buf = msgbuf;
+ msg[0].len = i;
+
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].buf = buf;
+ msg[1].len = count;
+
+ status = i2c_transfer(client->adapter, msg, 2);
+ dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
+ count, offset, status);
+
+ if (status == 2)
+ return count;
+ else if (status >= 0)
+ return -EIO;
+ else
+ return status;
+}
+
+static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct at24_data *at24;
+ ssize_t retval = 0;
+
+ at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+ if (unlikely(!count))
+ return count;
+
+ /*
+ * Read data from chip, protecting against concurrent updates
+ * from this host, but not from other I2C masters.
+ */
+ mutex_lock(&at24->lock);
+
+ while (count) {
+ ssize_t status;
+
+ status = at24_eeprom_read(at24, buf, off, count);
+ if (status <= 0) {
+ if (retval == 0)
+ retval = status;
+ break;
+ }
+ buf += status;
+ off += status;
+ count -= status;
+ retval += status;
+ }
+
+ mutex_unlock(&at24->lock);
+
+ return retval;
+}
+
+
+/*
+ * REVISIT: export at24_bin{read,write}() to let other kernel code use
+ * eeprom data. For example, it might hold a board's Ethernet address, or
+ * board-specific calibration data generated on the manufacturing floor.
+ */
+
+
+/*
+ * Note that if the hardware write-protect pin is pulled high, the whole
+ * chip is normally write protected. But there are plenty of product
+ * variants here, including OTP fuses and partial chip protect.
+ *
+ * We only use page mode writes; the alternative is sloooow. This routine
+ * writes at most one page.
+ */
+static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+ unsigned offset, size_t count)
+{
+ struct i2c_client *client;
+ struct i2c_msg msg;
+ ssize_t status;
+ unsigned long timeout, write_time;
+ unsigned next_page;
+
+ /* Get corresponding I2C address and adjust offset */
+ client = at24_translate_offset(at24, &offset);
+
+ /* write_max is at most a page */
+ if (count > at24->write_max)
+ count = at24->write_max;
+
+ /* Never roll over backwards, to the start of this page */
+ next_page = roundup(offset + 1, at24->chip.page_size);
+ if (offset + count > next_page)
+ count = next_page - offset;
+
+ /* If we'll use I2C calls for I/O, set up the message */
+ if (!at24->use_smbus) {
+ int i = 0;
+
+ msg.addr = client->addr;
+ msg.flags = 0;
+
+ /* msg.buf is u8 and casts will mask the values */
+ msg.buf = at24->writebuf;
+ if (at24->chip.flags & AT24_FLAG_ADDR16)
+ msg.buf[i++] = offset >> 8;
+
+ msg.buf[i++] = offset;
+ memcpy(&msg.buf[i], buf, count);
+ msg.len = i + count;
+ }
+
+ /*
+ * Writes fail if the previous one didn't complete yet. We may
+ * loop a few times until this one succeeds, waiting at least
+ * long enough for one entire page write to work.
+ */
+ timeout = jiffies + msecs_to_jiffies(write_timeout);
+ do {
+ write_time = jiffies;
+ if (at24->use_smbus) {
+ status = i2c_smbus_write_i2c_block_data(client,
+ offset, count, buf);
+ if (status == 0)
+ status = count;
+ } else {
+ status = i2c_transfer(client->adapter, &msg, 1);
+ if (status == 1)
+ status = count;
+ }
+ dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
+ count, offset, status, jiffies);
+
+ if (status == count)
+ return count;
+
+ /* REVISIT: at HZ=100, this is sloooow */
+ msleep(1);
+ } while (time_before(write_time, timeout));
+
+ return -ETIMEDOUT;
+}
+
+static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct at24_data *at24;
+ ssize_t retval = 0;
+
+ at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
+
+ if (unlikely(!count))
+ return count;
+
+ /*
+ * Write data to chip, protecting against concurrent updates
+ * from this host, but not from other I2C masters.
+ */
+ mutex_lock(&at24->lock);
+
+ while (count) {
+ ssize_t status;
+
+ status = at24_eeprom_write(at24, buf, off, count);
+ if (status <= 0) {
+ if (retval == 0)
+ retval = status;
+ break;
+ }
+ buf += status;
+ off += status;
+ count -= status;
+ retval += status;
+ }
+
+ mutex_unlock(&at24->lock);
+
+ return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct at24_platform_data chip;
+ bool writable;
+ bool use_smbus = false;
+ struct at24_data *at24;
+ int err;
+ unsigned i, num_addresses;
+ kernel_ulong_t magic;
+
+ if (client->dev.platform_data) {
+ chip = *(struct at24_platform_data *)client->dev.platform_data;
+ } else {
+ if (!id->driver_data) {
+ err = -ENODEV;
+ goto err_out;
+ }
+ magic = id->driver_data;
+ chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
+ magic >>= AT24_SIZE_BYTELEN;
+ chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
+ /*
+ * This is slow, but we can't know all eeproms, so we better
+ * play safe. Specifying custom eeprom-types via platform_data
+ * is recommended anyhow.
+ */
+ chip.page_size = 1;
+ }
+
+ if (!is_power_of_2(chip.byte_len))
+ dev_warn(&client->dev,
+ "byte_len looks suspicious (no power of 2)!\n");
+ if (!is_power_of_2(chip.page_size))
+ dev_warn(&client->dev,
+ "page_size looks suspicious (no power of 2)!\n");
+
+ /* Use I2C operations unless we're stuck with SMBus extensions. */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ if (chip.flags & AT24_FLAG_ADDR16) {
+ err = -EPFNOSUPPORT;
+ goto err_out;
+ }
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ err = -EPFNOSUPPORT;
+ goto err_out;
+ }
+ use_smbus = true;
+ }
+
+ if (chip.flags & AT24_FLAG_TAKE8ADDR)
+ num_addresses = 8;
+ else
+ num_addresses = DIV_ROUND_UP(chip.byte_len,
+ (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
+
+ at24 = kzalloc(sizeof(struct at24_data) +
+ num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
+ if (!at24) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ mutex_init(&at24->lock);
+ at24->use_smbus = use_smbus;
+ at24->chip = chip;
+ at24->num_addresses = num_addresses;
+
+ /*
+ * Export the EEPROM bytes through sysfs, since that's convenient.
+ * By default, only root should see the data (maybe passwords etc)
+ */
+ at24->bin.attr.name = "eeprom";
+ at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
+ at24->bin.read = at24_bin_read;
+ at24->bin.size = chip.byte_len;
+
+ writable = !(chip.flags & AT24_FLAG_READONLY);
+ if (writable) {
+ if (!use_smbus || i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
+
+ unsigned write_max = chip.page_size;
+
+ at24->bin.write = at24_bin_write;
+ at24->bin.attr.mode |= S_IWUSR;
+
+ if (write_max > io_limit)
+ write_max = io_limit;
+ if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
+ write_max = I2C_SMBUS_BLOCK_MAX;
+ at24->write_max = write_max;
+
+ /* buffer (data + address at the beginning) */
+ at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
+ if (!at24->writebuf) {
+ err = -ENOMEM;
+ goto err_struct;
+ }
+ } else {
+ dev_warn(&client->dev,
+ "cannot write due to controller restrictions.");
+ }
+ }
+
+ at24->client[0] = client;
+
+ /* use dummy devices for multiple-address chips */
+ for (i = 1; i < num_addresses; i++) {
+ at24->client[i] = i2c_new_dummy(client->adapter,
+ client->addr + i);
+ if (!at24->client[i]) {
+ dev_err(&client->dev, "address 0x%02x unavailable\n",
+ client->addr + i);
+ err = -EADDRINUSE;
+ goto err_clients;
+ }
+ }
+
+ err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
+ if (err)
+ goto err_clients;
+
+ i2c_set_clientdata(client, at24);
+
+ dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
+ at24->bin.size, client->name,
+ writable ? "(writable)" : "(read-only)");
+ dev_dbg(&client->dev,
+ "page_size %d, num_addresses %d, write_max %d%s\n",
+ chip.page_size, num_addresses,
+ at24->write_max,
+ use_smbus ? ", use_smbus" : "");
+
+ return 0;
+
+err_clients:
+ for (i = 1; i < num_addresses; i++)
+ if (at24->client[i])
+ i2c_unregister_device(at24->client[i]);
+
+ kfree(at24->writebuf);
+err_struct:
+ kfree(at24);
+err_out:
+ dev_dbg(&client->dev, "probe error %d\n", err);
+ return err;
+}
+
+static int __devexit at24_remove(struct i2c_client *client)
+{
+ struct at24_data *at24;
+ int i;
+
+ at24 = i2c_get_clientdata(client);
+ sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
+
+ for (i = 1; i < at24->num_addresses; i++)
+ i2c_unregister_device(at24->client[i]);
+
+ kfree(at24->writebuf);
+ kfree(at24);
+ i2c_set_clientdata(client, NULL);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct i2c_driver at24_driver = {
+ .driver = {
+ .name = "at24",
+ .owner = THIS_MODULE,
+ },
+ .probe = at24_probe,
+ .remove = __devexit_p(at24_remove),
+ .id_table = at24_ids,
+};
+
+static int __init at24_init(void)
+{
+ io_limit = rounddown_pow_of_two(io_limit);
+ return i2c_add_driver(&at24_driver);
+}
+module_init(at24_init);
+
+static void __exit at24_exit(void)
+{
+ i2c_del_driver(&at24_driver);
+}
+module_exit(at24_exit);
+
+MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
+MODULE_AUTHOR("David Brownell and Wolfram Sang");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
new file mode 100644
index 000000000000..290dbe99647a
--- /dev/null
+++ b/drivers/misc/eeprom/at25.c
@@ -0,0 +1,389 @@
+/*
+ * at25.c -- support most SPI EEPROMs, such as Atmel AT25 models
+ *
+ * Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/sched.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+
+/*
+ * NOTE: this is an *EEPROM* driver. The vagaries of product naming
+ * mean that some AT25 products are EEPROMs, and others are FLASH.
+ * Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver,
+ * not this one!
+ */
+
+struct at25_data {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct spi_eeprom chip;
+ struct bin_attribute bin;
+ unsigned addrlen;
+};
+
+#define AT25_WREN 0x06 /* latch the write enable */
+#define AT25_WRDI 0x04 /* reset the write enable */
+#define AT25_RDSR 0x05 /* read status register */
+#define AT25_WRSR 0x01 /* write status register */
+#define AT25_READ 0x03 /* read byte(s) */
+#define AT25_WRITE 0x02 /* write byte(s)/sector */
+
+#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */
+#define AT25_SR_WEN 0x02 /* write enable (latched) */
+#define AT25_SR_BP0 0x04 /* BP for software writeprotect */
+#define AT25_SR_BP1 0x08
+#define AT25_SR_WPEN 0x80 /* writeprotect enable */
+
+
+#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */
+
+/* Specs often allow 5 msec for a page write, sometimes 20 msec;
+ * it's important to recover from write timeouts.
+ */
+#define EE_TIMEOUT 25
+
+/*-------------------------------------------------------------------------*/
+
+#define io_limit PAGE_SIZE /* bytes */
+
+static ssize_t
+at25_ee_read(
+ struct at25_data *at25,
+ char *buf,
+ unsigned offset,
+ size_t count
+)
+{
+ u8 command[EE_MAXADDRLEN + 1];
+ u8 *cp;
+ ssize_t status;
+ struct spi_transfer t[2];
+ struct spi_message m;
+
+ cp = command;
+ *cp++ = AT25_READ;
+
+ /* 8/16/24-bit address is written MSB first */
+ switch (at25->addrlen) {
+ default: /* case 3 */
+ *cp++ = offset >> 16;
+ case 2:
+ *cp++ = offset >> 8;
+ case 1:
+ case 0: /* can't happen: for better codegen */
+ *cp++ = offset >> 0;
+ }
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof t);
+
+ t[0].tx_buf = command;
+ t[0].len = at25->addrlen + 1;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&at25->lock);
+
+ /* Read it all at once.
+ *
+ * REVISIT that's potentially a problem with large chips, if
+ * other devices on the bus need to be accessed regularly or
+ * this chip is clocked very slowly
+ */
+ status = spi_sync(at25->spi, &m);
+ dev_dbg(&at25->spi->dev,
+ "read %Zd bytes at %d --> %d\n",
+ count, offset, (int) status);
+
+ mutex_unlock(&at25->lock);
+ return status ? status : count;
+}
+
+static ssize_t
+at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct at25_data *at25;
+
+ dev = container_of(kobj, struct device, kobj);
+ at25 = dev_get_drvdata(dev);
+
+ if (unlikely(off >= at25->bin.size))
+ return 0;
+ if ((off + count) > at25->bin.size)
+ count = at25->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ return at25_ee_read(at25, buf, off, count);
+}
+
+
+static ssize_t
+at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
+{
+ ssize_t status = 0;
+ unsigned written = 0;
+ unsigned buf_size;
+ u8 *bounce;
+
+ /* Temp buffer starts with command and address */
+ buf_size = at25->chip.page_size;
+ if (buf_size > io_limit)
+ buf_size = io_limit;
+ bounce = kmalloc(buf_size + at25->addrlen + 1, GFP_KERNEL);
+ if (!bounce)
+ return -ENOMEM;
+
+ /* For write, rollover is within the page ... so we write at
+ * most one page, then manually roll over to the next page.
+ */
+ bounce[0] = AT25_WRITE;
+ mutex_lock(&at25->lock);
+ do {
+ unsigned long timeout, retries;
+ unsigned segment;
+ unsigned offset = (unsigned) off;
+ u8 *cp = bounce + 1;
+
+ *cp = AT25_WREN;
+ status = spi_write(at25->spi, cp, 1);
+ if (status < 0) {
+ dev_dbg(&at25->spi->dev, "WREN --> %d\n",
+ (int) status);
+ break;
+ }
+
+ /* 8/16/24-bit address is written MSB first */
+ switch (at25->addrlen) {
+ default: /* case 3 */
+ *cp++ = offset >> 16;
+ case 2:
+ *cp++ = offset >> 8;
+ case 1:
+ case 0: /* can't happen: for better codegen */
+ *cp++ = offset >> 0;
+ }
+
+ /* Write as much of a page as we can */
+ segment = buf_size - (offset % buf_size);
+ if (segment > count)
+ segment = count;
+ memcpy(cp, buf, segment);
+ status = spi_write(at25->spi, bounce,
+ segment + at25->addrlen + 1);
+ dev_dbg(&at25->spi->dev,
+ "write %u bytes at %u --> %d\n",
+ segment, offset, (int) status);
+ if (status < 0)
+ break;
+
+ /* REVISIT this should detect (or prevent) failed writes
+ * to readonly sections of the EEPROM...
+ */
+
+ /* Wait for non-busy status */
+ timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
+ retries = 0;
+ do {
+ int sr;
+
+ sr = spi_w8r8(at25->spi, AT25_RDSR);
+ if (sr < 0 || (sr & AT25_SR_nRDY)) {
+ dev_dbg(&at25->spi->dev,
+ "rdsr --> %d (%02x)\n", sr, sr);
+ /* at HZ=100, this is sloooow */
+ msleep(1);
+ continue;
+ }
+ if (!(sr & AT25_SR_nRDY))
+ break;
+ } while (retries++ < 3 || time_before_eq(jiffies, timeout));
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(&at25->spi->dev,
+ "write %d bytes offset %d, "
+ "timeout after %u msecs\n",
+ segment, offset,
+ jiffies_to_msecs(jiffies -
+ (timeout - EE_TIMEOUT)));
+ status = -ETIMEDOUT;
+ break;
+ }
+
+ off += segment;
+ buf += segment;
+ count -= segment;
+ written += segment;
+
+ } while (count > 0);
+
+ mutex_unlock(&at25->lock);
+
+ kfree(bounce);
+ return written ? written : status;
+}
+
+static ssize_t
+at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct at25_data *at25;
+
+ dev = container_of(kobj, struct device, kobj);
+ at25 = dev_get_drvdata(dev);
+
+ if (unlikely(off >= at25->bin.size))
+ return -EFBIG;
+ if ((off + count) > at25->bin.size)
+ count = at25->bin.size - off;
+ if (unlikely(!count))
+ return count;
+
+ return at25_ee_write(at25, buf, off, count);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int at25_probe(struct spi_device *spi)
+{
+ struct at25_data *at25 = NULL;
+ const struct spi_eeprom *chip;
+ int err;
+ int sr;
+ int addrlen;
+
+ /* Chip description */
+ chip = spi->dev.platform_data;
+ if (!chip) {
+ dev_dbg(&spi->dev, "no chip description\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ /* For now we only support 8/16/24 bit addressing */
+ if (chip->flags & EE_ADDR1)
+ addrlen = 1;
+ else if (chip->flags & EE_ADDR2)
+ addrlen = 2;
+ else if (chip->flags & EE_ADDR3)
+ addrlen = 3;
+ else {
+ dev_dbg(&spi->dev, "unsupported address type\n");
+ err = -EINVAL;
+ goto fail;
+ }
+
+ /* Ping the chip ... the status register is pretty portable,
+ * unlike probing manufacturer IDs. We do expect that system
+ * firmware didn't write it in the past few milliseconds!
+ */
+ sr = spi_w8r8(spi, AT25_RDSR);
+ if (sr < 0 || sr & AT25_SR_nRDY) {
+ dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr);
+ err = -ENXIO;
+ goto fail;
+ }
+
+ if (!(at25 = kzalloc(sizeof *at25, GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ mutex_init(&at25->lock);
+ at25->chip = *chip;
+ at25->spi = spi_dev_get(spi);
+ dev_set_drvdata(&spi->dev, at25);
+ at25->addrlen = addrlen;
+
+ /* Export the EEPROM bytes through sysfs, since that's convenient.
+ * Default to root-only access to the data; EEPROMs often hold data
+ * that's sensitive for read and/or write, like ethernet addresses,
+ * security codes, board-specific manufacturing calibrations, etc.
+ */
+ at25->bin.attr.name = "eeprom";
+ at25->bin.attr.mode = S_IRUSR;
+ at25->bin.read = at25_bin_read;
+
+ at25->bin.size = at25->chip.byte_len;
+ if (!(chip->flags & EE_READONLY)) {
+ at25->bin.write = at25_bin_write;
+ at25->bin.attr.mode |= S_IWUSR;
+ }
+
+ err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin);
+ if (err)
+ goto fail;
+
+ dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n",
+ (at25->bin.size < 1024)
+ ? at25->bin.size
+ : (at25->bin.size / 1024),
+ (at25->bin.size < 1024) ? "Byte" : "KByte",
+ at25->chip.name,
+ (chip->flags & EE_READONLY) ? " (readonly)" : "",
+ at25->chip.page_size);
+ return 0;
+fail:
+ dev_dbg(&spi->dev, "probe err %d\n", err);
+ kfree(at25);
+ return err;
+}
+
+static int __devexit at25_remove(struct spi_device *spi)
+{
+ struct at25_data *at25;
+
+ at25 = dev_get_drvdata(&spi->dev);
+ sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin);
+ kfree(at25);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct spi_driver at25_driver = {
+ .driver = {
+ .name = "at25",
+ .owner = THIS_MODULE,
+ },
+ .probe = at25_probe,
+ .remove = __devexit_p(at25_remove),
+};
+
+static int __init at25_init(void)
+{
+ return spi_register_driver(&at25_driver);
+}
+module_init(at25_init);
+
+static void __exit at25_exit(void)
+{
+ spi_unregister_driver(&at25_driver);
+}
+module_exit(at25_exit);
+
+MODULE_DESCRIPTION("Driver for most SPI EEPROMs");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c
new file mode 100644
index 000000000000..2c27193aeaa0
--- /dev/null
+++ b/drivers/misc/eeprom/eeprom.c
@@ -0,0 +1,257 @@
+/*
+ Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
+ Philip Edelbrock <phil@netroedge.com>
+ Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
+ Copyright (C) 2003 IBM Corp.
+ Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+ 0x55, 0x56, 0x57, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(eeprom);
+
+
+/* Size of EEPROM in bytes */
+#define EEPROM_SIZE 256
+
+/* possible types of eeprom devices */
+enum eeprom_nature {
+ UNKNOWN,
+ VAIO,
+};
+
+/* Each client has this additional data */
+struct eeprom_data {
+ struct mutex update_lock;
+ u8 valid; /* bitfield, bit!=0 if slice is valid */
+ unsigned long last_updated[8]; /* In jiffies, 8 slices */
+ u8 data[EEPROM_SIZE]; /* Register values */
+ enum eeprom_nature nature;
+};
+
+
+static void eeprom_update_client(struct i2c_client *client, u8 slice)
+{
+ struct eeprom_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (!(data->valid & (1 << slice)) ||
+ time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
+ dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ for (i = slice << 5; i < (slice + 1) << 5; i += 32)
+ if (i2c_smbus_read_i2c_block_data(client, i,
+ 32, data->data + i)
+ != 32)
+ goto exit;
+ } else {
+ for (i = slice << 5; i < (slice + 1) << 5; i += 2) {
+ int word = i2c_smbus_read_word_data(client, i);
+ if (word < 0)
+ goto exit;
+ data->data[i] = word & 0xff;
+ data->data[i + 1] = word >> 8;
+ }
+ }
+ data->last_updated[slice] = jiffies;
+ data->valid |= (1 << slice);
+ }
+exit:
+ mutex_unlock(&data->update_lock);
+}
+
+static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
+ struct eeprom_data *data = i2c_get_clientdata(client);
+ u8 slice;
+
+ if (off > EEPROM_SIZE)
+ return 0;
+ if (off + count > EEPROM_SIZE)
+ count = EEPROM_SIZE - off;
+
+ /* Only refresh slices which contain requested bytes */
+ for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++)
+ eeprom_update_client(client, slice);
+
+ /* Hide Vaio private settings to regular users:
+ - BIOS passwords: bytes 0x00 to 0x0f
+ - UUID: bytes 0x10 to 0x1f
+ - Serial number: 0xc0 to 0xdf */
+ if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) {
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if ((off + i <= 0x1f) ||
+ (off + i >= 0xc0 && off + i <= 0xdf))
+ buf[i] = 0;
+ else
+ buf[i] = data->data[off + i];
+ }
+ } else {
+ memcpy(buf, &data->data[off], count);
+ }
+
+ return count;
+}
+
+static struct bin_attribute eeprom_attr = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO,
+ },
+ .size = EEPROM_SIZE,
+ .read = eeprom_read,
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int eeprom_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+
+ /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all
+ addresses 0x50-0x57, but we only care about 0x50. So decline
+ attaching to addresses >= 0x51 on DDC buses */
+ if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51)
+ return -ENODEV;
+
+ /* There are four ways we can read the EEPROM data:
+ (1) I2C block reads (faster, but unsupported by most adapters)
+ (2) Word reads (128% overhead)
+ (3) Consecutive byte reads (88% overhead, unsafe)
+ (4) Regular byte data reads (265% overhead)
+ The third and fourth methods are not implemented by this driver
+ because all known adapters support one of the first two. */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)
+ && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+ return -ENODEV;
+
+ strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int eeprom_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct eeprom_data *data;
+ int err;
+
+ if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ memset(data->data, 0xff, EEPROM_SIZE);
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+ data->nature = UNKNOWN;
+
+ /* Detect the Vaio nature of EEPROMs.
+ We use the "PCG-" or "VGN-" prefix as the signature. */
+ if (client->addr == 0x57
+ && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
+ char name[4];
+
+ name[0] = i2c_smbus_read_byte_data(client, 0x80);
+ name[1] = i2c_smbus_read_byte_data(client, 0x81);
+ name[2] = i2c_smbus_read_byte_data(client, 0x82);
+ name[3] = i2c_smbus_read_byte_data(client, 0x83);
+
+ if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) {
+ dev_info(&client->dev, "Vaio EEPROM detected, "
+ "enabling privacy protection\n");
+ data->nature = VAIO;
+ }
+ }
+
+ /* create the sysfs eeprom file */
+ err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
+ if (err)
+ goto exit_kfree;
+
+ return 0;
+
+exit_kfree:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int eeprom_remove(struct i2c_client *client)
+{
+ sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
+ kfree(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static const struct i2c_device_id eeprom_id[] = {
+ { "eeprom", 0 },
+ { }
+};
+
+static struct i2c_driver eeprom_driver = {
+ .driver = {
+ .name = "eeprom",
+ },
+ .probe = eeprom_probe,
+ .remove = eeprom_remove,
+ .id_table = eeprom_id,
+
+ .class = I2C_CLASS_DDC | I2C_CLASS_SPD,
+ .detect = eeprom_detect,
+ .address_data = &addr_data,
+};
+
+static int __init eeprom_init(void)
+{
+ return i2c_add_driver(&eeprom_driver);
+}
+
+static void __exit eeprom_exit(void)
+{
+ i2c_del_driver(&eeprom_driver);
+}
+
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
+ "Philip Edelbrock <phil@netroedge.com> and "
+ "Greg Kroah-Hartman <greg@kroah.com>");
+MODULE_DESCRIPTION("I2C EEPROM driver");
+MODULE_LICENSE("GPL");
+
+module_init(eeprom_init);
+module_exit(eeprom_exit);
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
index 15b1780025c8..15b1780025c8 100644
--- a/drivers/misc/eeprom_93cx6.c
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 05e298289238..f26667a7abf7 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -207,7 +207,7 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
&device_ccb->recv_ctrl);
/* give iLO some time to process stop request */
- for (retries = 1000; retries > 0; retries--) {
+ for (retries = MAX_WAIT; retries > 0; retries--) {
doorbell_set(driver_ccb);
udelay(1);
if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A))
@@ -309,7 +309,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
doorbell_clr(driver_ccb);
/* make sure iLO is really handling requests */
- for (i = 1000; i > 0; i--) {
+ for (i = MAX_WAIT; i > 0; i--) {
if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL))
break;
udelay(1);
@@ -326,7 +326,7 @@ static int ilo_ccb_open(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
return 0;
free:
- pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+ ilo_ccb_close(pdev, data);
out:
return error;
}
@@ -758,7 +758,7 @@ static void __exit ilo_exit(void)
class_destroy(ilo_class);
}
-MODULE_VERSION("0.05");
+MODULE_VERSION("0.06");
MODULE_ALIAS(ILO_NAME);
MODULE_DESCRIPTION(ILO_NAME);
MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
index a281207696c1..b64a20ef07e3 100644
--- a/drivers/misc/hpilo.h
+++ b/drivers/misc/hpilo.h
@@ -19,6 +19,8 @@
#define MAX_ILO_DEV 1
/* max number of files */
#define MAX_OPEN (MAX_CCB * MAX_ILO_DEV)
+/* spin counter for open/close delay */
+#define MAX_WAIT 10000
/*
* Per device, used to track global memory allocations.
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index a5bd658c2e83..275b78896a73 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
@@ -514,7 +514,8 @@ struct xpc_channel_uv {
/* partition's notify mq */
struct xpc_send_msg_slot_uv *send_msg_slots;
- struct xpc_notify_mq_msg_uv *recv_msg_slots;
+ void *recv_msg_slots; /* each slot will hold a xpc_notify_mq_msg_uv */
+ /* structure plus the user's payload */
struct xpc_fifo_head_uv msg_slot_free_list;
struct xpc_fifo_head_uv recv_msg_list; /* deliverable payloads */
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index 9cd2ebe2a3b6..45fd653dbe31 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
return;
-
- DBUG_ON(ch->local_msgqueue == NULL);
- DBUG_ON(ch->remote_msgqueue == NULL);
}
if (!(ch->flags & XPC_C_OPENREPLY)) {
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 73b7fb8de47a..2e975762c32b 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -899,7 +899,7 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n",
part_sn2->remote_vars_pa);
- part->last_heartbeat = remote_vars->heartbeat;
+ part->last_heartbeat = remote_vars->heartbeat - 1;
dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n",
part->last_heartbeat);
@@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void)
int n_IRQs_expected;
int n_IRQs_detected;
- DBUG_ON(xpc_activate_IRQ_rcvd == 0);
-
spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags);
n_IRQs_expected = xpc_activate_IRQ_rcvd;
xpc_activate_IRQ_rcvd = 0;
@@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch)
msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue +
(get % ch->local_nentries) *
ch->entry_size);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
msg->flags = 0;
} while (++get < ch_sn2->remote_GP.get);
}
@@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch)
struct xpc_msg_sn2 *msg;
s64 put;
- put = ch_sn2->w_remote_GP.put;
+ /* flags are zeroed when the buffer is allocated */
+ if (ch_sn2->remote_GP.put < ch->remote_nentries)
+ return;
+
+ put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries);
do {
msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue +
(put % ch->remote_nentries) *
ch->entry_size);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
+ DBUG_ON(!(msg->flags & XPC_M_SN2_DONE));
+ DBUG_ON(msg->number != put - ch->remote_nentries);
msg->flags = 0;
} while (++put < ch_sn2->remote_GP.put);
}
@@ -1836,6 +1842,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number)
*/
xpc_clear_remote_msgqueue_flags_sn2(ch);
+ smp_wmb(); /* ensure flags have been cleared before bte_copy */
ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put;
dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, "
@@ -1934,7 +1941,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
break;
get = ch_sn2->w_local_GP.get;
- rmb(); /* guarantee that .get loads before .put */
+ smp_rmb(); /* guarantee that .get loads before .put */
if (get == ch_sn2->w_remote_GP.put)
break;
@@ -1956,11 +1963,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch)
msg = xpc_pull_remote_msg_sn2(ch, get);
- DBUG_ON(msg != NULL && msg->number != get);
- DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE));
- DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY));
+ if (msg != NULL) {
+ DBUG_ON(msg->number != get);
+ DBUG_ON(msg->flags & XPC_M_SN2_DONE);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
- payload = &msg->payload;
+ payload = &msg->payload;
+ }
break;
}
@@ -2053,7 +2062,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags,
while (1) {
put = ch_sn2->w_local_GP.put;
- rmb(); /* guarantee that .put loads before .get */
+ smp_rmb(); /* guarantee that .put loads before .get */
if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) {
/* There are available message entries. We need to try
@@ -2186,7 +2195,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload,
* The preceding store of msg->flags must occur before the following
* load of local_GP->put.
*/
- mb();
+ smp_mb();
/* see if the message is next in line to be sent, if so send it */
@@ -2277,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n",
(void *)msg, msg_number, ch->partid, ch->number);
- DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) !=
+ DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) !=
msg_number % ch->remote_nentries);
+ DBUG_ON(!(msg->flags & XPC_M_SN2_READY));
DBUG_ON(msg->flags & XPC_M_SN2_DONE);
msg->flags |= XPC_M_SN2_DONE;
@@ -2287,7 +2297,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload)
* The preceding store of msg->flags must occur before the following
* load of local_GP->get.
*/
- mb();
+ smp_mb();
/*
* See if this message is next in line to be acknowledged as having
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 91a55b1b1037..29c0502a96b2 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
@@ -1010,8 +1010,8 @@ xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch)
continue;
for (entry = 0; entry < nentries; entry++) {
- msg_slot = ch_uv->recv_msg_slots + entry *
- ch->entry_size;
+ msg_slot = ch_uv->recv_msg_slots +
+ entry * ch->entry_size;
msg_slot->hdr.msg_slot_number = entry;
}
@@ -1308,9 +1308,8 @@ xpc_handle_notify_mq_msg_uv(struct xpc_partition *part,
/* we're dealing with a normal message sent via the notify_mq */
ch_uv = &ch->sn.uv;
- msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
- (msg->hdr.msg_slot_number % ch->remote_nentries) *
- ch->entry_size);
+ msg_slot = ch_uv->recv_msg_slots +
+ (msg->hdr.msg_slot_number % ch->remote_nentries) * ch->entry_size;
BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
BUG_ON(msg_slot->hdr.size != 0);
@@ -1423,7 +1422,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload,
atomic_inc(&ch->n_to_notify);
msg_slot->key = key;
- wmb(); /* a non-NULL func must hit memory after the key */
+ smp_wmb(); /* a non-NULL func must hit memory after the key */
msg_slot->func = func;
if (ch->flags & XPC_C_DISCONNECTING) {
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index 7957f525b2f4..6faefcffcb53 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1999-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1999-2009 Silicon Graphics, Inc. All rights reserved.
*/
/*
@@ -551,6 +551,7 @@ xpnet_init(void)
netif_carrier_off(xpnet_device);
+ xpnet_device->netdev_ops = &xpnet_netdev_ops;
xpnet_device->mtu = XPNET_DEF_MTU;
/*