diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt')
-rw-r--r-- | Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt | 79 |
1 files changed, 0 insertions, 79 deletions
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt deleted file mode 100644 index bae3c7f838cf..000000000000 --- a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt +++ /dev/null @@ -1,79 +0,0 @@ -Binding for Samsung S2MPA01 regulator block -=========================================== - -This is a part of device tree bindings for S2M family multi-function devices. -More information can be found in bindings/mfd/sec-core.txt file. - -The S2MPA01 device provide buck and LDO regulators. - -To register these with regulator framework instantiate under main device node -a sub-node named "regulators" with more sub-nodes for each regulator using the -common regulator binding documented in: - - Documentation/devicetree/bindings/regulator/regulator.txt - - -Names of regulators supported by S2MPA01 device: - - LDOn - - valid values for n are 1 to 26 - - Example: LDO1, LD02, LDO26 - - BUCKn - - valid values for n are 1 to 10. - - Example: BUCK1, BUCK2, BUCK9 -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number -as per the datasheet of device. - - -Optional properties of buck regulator nodes under "regulators" sub-node: - - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500 - (default), 25000, or 50000. May be 0 for disabling the ramp delay on - BUCK{1,2,3,4}. - - In the absence of the regulator-ramp-delay property, the default ramp - delay will be used. - - Note: Some bucks share the ramp rate setting i.e. same ramp value - will be set for a particular group of bucks so provide the same - regulator-ramp-delay value for them. - Groups sharing ramp rate: - - buck{1,6}, - - buck{2,4}, - - buck{8,9,10}. - -Example: - - s2mpa01_pmic@66 { - compatible = "samsung,s2mpa01-pmic"; - reg = <0x66>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - regulator-ramp-delay = <50000>; - }; - }; - }; |