diff options
| author | John Youn <John.Youn@synopsys.com> | 2015-12-17 11:17:45 -0800 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2015-12-22 12:01:01 -0600 |
| commit | 43e9034904dd37db7ed87fa8f5039c561c4004cd (patch) | |
| tree | 84520743263e49a861e6d27242e589c84d6f4aff /drivers | |
| parent | 55e1040e424b59063da627fb580ec953f4c01de7 (diff) | |
usb: dwc2: gadget: Use hw params from core
Use the previously cached hw params in the gadget. This saves a reset
and force mode in the gadget initialization during probe and makes
getting the hardware parameters consistent between gadget and host.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/dwc2/gadget.c | 41 |
1 files changed, 16 insertions, 25 deletions
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 3a24cbf355a9..5f63058f854e 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3403,8 +3403,8 @@ static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) /* check hardware configuration */ - cfg = dwc2_readl(hsotg->regs + GHWCFG2); - hsotg->num_of_eps = (cfg >> GHWCFG2_NUM_DEV_EP_SHIFT) & 0xF; + hsotg->num_of_eps = hsotg->hw_params.num_dev_ep; + /* Add ep0 */ hsotg->num_of_eps++; @@ -3415,7 +3415,7 @@ static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) /* Same dwc2_hsotg_ep is used in both directions for ep0 */ hsotg->eps_out[0] = hsotg->eps_in[0]; - cfg = dwc2_readl(hsotg->regs + GHWCFG1); + cfg = hsotg->hw_params.dev_ep_dirs; for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) { ep_type = cfg & 3; /* Direction in or both */ @@ -3434,11 +3434,8 @@ static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) } } - cfg = dwc2_readl(hsotg->regs + GHWCFG3); - hsotg->fifo_mem = (cfg >> GHWCFG3_DFIFO_DEPTH_SHIFT); - - cfg = dwc2_readl(hsotg->regs + GHWCFG4); - hsotg->dedicated_fifos = (cfg >> GHWCFG4_DED_FIFO_SHIFT) & 1; + hsotg->fifo_mem = hsotg->hw_params.total_fifo_size; + hsotg->dedicated_fifos = hsotg->hw_params.en_multiple_tx_fifo; dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n", hsotg->num_of_eps, @@ -3563,6 +3560,17 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo)); /* Device tree specific probe */ dwc2_hsotg_of_probe(hsotg); + + /* Check against largest possible value. */ + if (hsotg->g_np_g_tx_fifo_sz > + hsotg->hw_params.dev_nperio_tx_fifo_size) { + dev_warn(dev, "Specified GNPTXFDEP=%d > %d\n", + hsotg->g_np_g_tx_fifo_sz, + hsotg->hw_params.dev_nperio_tx_fifo_size); + hsotg->g_np_g_tx_fifo_sz = + hsotg->hw_params.dev_nperio_tx_fifo_size; + } + /* Dump fifo information */ dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n", hsotg->g_np_g_tx_fifo_sz); @@ -3579,20 +3587,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) hsotg->op_state = OTG_STATE_B_PERIPHERAL; - /* - * Force Device mode before initialization. - * This allows correctly configuring fifo for device mode. - */ - __bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEHOSTMODE); - __orr32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE); - - /* - * According to Synopsys databook, this sleep is needed for the force - * device mode to take effect. - */ - msleep(25); - - dwc2_hsotg_corereset(hsotg); ret = dwc2_hsotg_hw_cfg(hsotg); if (ret) { dev_err(hsotg->dev, "Hardware configuration failed: %d\n", ret); @@ -3601,9 +3595,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) dwc2_hsotg_init(hsotg); - /* Switch back to default configuration */ - __bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE); - hsotg->ctrl_buff = devm_kzalloc(hsotg->dev, DWC2_CTRL_BUFF_SIZE, GFP_KERNEL); if (!hsotg->ctrl_buff) { |