staging: rtl8188eu: remove rtl8188eu driver from staging dir

This driver was deprecated with the introduction of the r8188eu driver,
based upon Realtek sources that were modified for CFG80211 support and
other fixes on GitHub by Larry Finger. As that driver is now progressing
at pace, we should remove this one.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210731133809.196681-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 262 deletions

diff --git a/drivers/staging/rtl8188eu/include/rtw_recv.h b/drivers/staging/rtl8188eu/include/rtw_recv.h
deleted file mode 100644
index 8c906b666b62..000000000000
--- a/drivers/staging/rtl8188eu/include/rtw_recv.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-#ifndef _RTW_RECV_H_
-#define _RTW_RECV_H_
-
-#include <osdep_service.h>
-#include <drv_types.h>
-
-#define NR_RECVFRAME 256
-
-#define RXFRAME_ALIGN	8
-#define RXFRAME_ALIGN_SZ	(1 << RXFRAME_ALIGN)
-
-#define MAX_RXFRAME_CNT	512
-#define MAX_RX_NUMBLKS		(32)
-#define RECVFRAME_HDR_ALIGN 128
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define MAX_SUBFRAME_COUNT	64
-
-/* for Rx reordering buffer control */
-struct recv_reorder_ctrl {
-	struct adapter	*padapter;
-	bool enable;
-	u16 indicate_seq;/* wstart_b, init_value=0xffff */
-	u16 wend_b;
-	u8 wsize_b;
-	struct __queue pending_recvframe_queue;
-	struct timer_list reordering_ctrl_timer;
-};
-
-struct	stainfo_rxcache	{
-	u16	tid_rxseq[16];
-/*
- *	unsigned short	tid0_rxseq;
- *	unsigned short	tid1_rxseq;
- *	unsigned short	tid2_rxseq;
- *	unsigned short	tid3_rxseq;
- *	unsigned short	tid4_rxseq;
- *	unsigned short	tid5_rxseq;
- *	unsigned short	tid6_rxseq;
- *	unsigned short	tid7_rxseq;
- *	unsigned short	tid8_rxseq;
- *	unsigned short	tid9_rxseq;
- *	unsigned short	tid10_rxseq;
- *	unsigned short	tid11_rxseq;
- *	unsigned short	tid12_rxseq;
- *	unsigned short	tid13_rxseq;
- *	unsigned short	tid14_rxseq;
- *	unsigned short	tid15_rxseq;
- */
-};
-
-struct signal_stat {
-	u8	update_req;		/* used to indicate */
-	u8	avg_val;		/* avg of valid elements */
-	u32	total_num;		/* num of valid elements */
-	u32	total_val;		/* sum of valid elements */
-};
-
-#define MAX_PATH_NUM_92CS		3
-
-struct phy_info {
-	u8	RxPWDBAll;
-	u8	SignalQuality;	 /*  in 0-100 index. */
-	u8	RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; /* EVM */
-	u8	RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/*  in 0~100 index */
-	s8	RxPower; /*  in dBm Translate from PWdB */
-/*  Real power in dBm for this packet, no beautification and aggregation.
- * Keep this raw info to be used for the other procedures.
- */
-	s8	recvpower;
-	u8	BTRxRSSIPercentage;
-	u8	SignalStrength; /*  in 0-100 index. */
-	u8	RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
-	u8	RxSNR[MAX_PATH_NUM_92CS];/* per-path's SNR */
-};
-
-struct rx_pkt_attrib {
-	u16	pkt_len;
-	u8	physt;
-	u8	drvinfo_sz;
-	u8	shift_sz;
-	u8	hdrlen; /* the WLAN Header Len */
-	u8	to_fr_ds;
-	u8	amsdu;
-	u8	qos;
-	u8	priority;
-	u8	pw_save;
-	u8	mdata;
-	u16	seq_num;
-	u8	frag_num;
-	u8	mfrag;
-	u8	order;
-	u8	privacy; /* in frame_ctrl field */
-	u8	bdecrypted;
-	u8	encrypt; /* when 0 indicate no encrypt. when non-zero,
-			  * indicate the encrypt algorithm
-			  */
-	u8	iv_len;
-	u8	icv_len;
-	u8	crc_err;
-	u8	icv_err;
-
-	u16 eth_type;
-
-	u8	dst[ETH_ALEN];
-	u8	src[ETH_ALEN];
-	u8	ta[ETH_ALEN];
-	u8	ra[ETH_ALEN];
-	u8	bssid[ETH_ALEN];
-
-	u8 ack_policy;
-
-	u8	key_index;
-
-	u8	mcs_rate;
-	u8	rxht;
-	u8	sgi;
-	u8	pkt_rpt_type;
-	u32	MacIDValidEntry[2];	/*  64 bits present 64 entry. */
-
-	struct phy_info phy_info;
-};
-
-/* These definition is used for Rx packet reordering. */
-#define SN_LESS(a, b)		(((a - b) & 0x800) != 0)
-#define SN_EQUAL(a, b)	(a == b)
-#define REORDER_WAIT_TIME	(50) /*  (ms) */
-
-#define RXDESC_SIZE	24
-#define RXDESC_OFFSET RXDESC_SIZE
-
-struct recv_stat {
-	__le32 rxdw0;
-	__le32 rxdw1;
-	__le32 rxdw2;
-	__le32 rxdw3;
-	__le32 rxdw4;
-	__le32 rxdw5;
-};
-
-/*
- * accesser of recv_priv: rtw_recv_entry(dispatch / passive level);
- * recv_thread(passive) ; returnpkt(dispatch)
- * ; halt(passive) ;
- *
- * using enter_critical section to protect
- */
-struct recv_priv {
-	struct __queue free_recv_queue;
-	struct __queue recv_pending_queue;
-	struct __queue uc_swdec_pending_queue;
-	void *pallocated_frame_buf;
-	struct adapter	*adapter;
-	u32	bIsAnyNonBEPkts;
-	u64	rx_bytes;
-	u64	rx_pkts;
-	u64	rx_drop;
-	u64	last_rx_bytes;
-
-	struct tasklet_struct irq_prepare_beacon_tasklet;
-	struct tasklet_struct recv_tasklet;
-	struct sk_buff_head free_recv_skb_queue;
-	struct sk_buff_head rx_skb_queue;
-	struct recv_buf *precv_buf;    /*  4 alignment */
-	struct __queue free_recv_buf_queue;
-	/* For display the phy information */
-	s8 rssi;
-	s8 rxpwdb;
-	u8 signal_strength;
-	u8 signal_qual;
-	u8 noise;
-	s8 RxRssi[2];
-
-	struct timer_list signal_stat_timer;
-	u32 signal_stat_sampling_interval;
-	struct signal_stat signal_qual_data;
-	struct signal_stat signal_strength_data;
-};
-
-#define rtw_set_signal_stat_timer(recvpriv)			\
-	mod_timer(&(recvpriv)->signal_stat_timer, jiffies +	\
-		  msecs_to_jiffies((recvpriv)->signal_stat_sampling_interval))
-
-struct sta_recv_priv {
-	spinlock_t lock;
-	int	option;
-	struct __queue defrag_q; /* keeping the fragment frame until defrag */
-	struct	stainfo_rxcache rxcache;
-};
-
-struct recv_buf {
-	struct adapter *adapter;
-	struct urb *purb;
-	struct sk_buff *pskb;
-	u8	reuse;
-};
-
-/*
- *	head  ----->
- *
- *		data  ----->
- *
- *			payload
- *
- *		tail  ----->
- *
- *
- *	end   ----->
- *
- *	len = (unsigned int )(tail - data);
- *
- */
-struct recv_frame {
-	struct list_head list;
-	struct sk_buff	 *pkt;
-	struct adapter  *adapter;
-	struct rx_pkt_attrib attrib;
-	struct sta_info *psta;
-	/* for A-MPDU Rx reordering buffer control */
-	struct recv_reorder_ctrl *preorder_ctrl;
-};
-
-struct recv_frame *_rtw_alloc_recvframe(struct __queue *pfree_recv_queue);
-struct recv_frame *rtw_alloc_recvframe(struct __queue *pfree_recv_queue);
-void rtw_init_recvframe(struct recv_frame *precvframe,
-			struct recv_priv *precvpriv);
-void rtw_free_recvframe(struct recv_frame *precvframe, struct __queue *pfree_recv_queue);
-#define rtw_dequeue_recvframe(queue) rtw_alloc_recvframe(queue)
-int _rtw_enqueue_recvframe(struct recv_frame *precvframe,
-			   struct __queue *queue);
-int rtw_enqueue_recvframe(struct recv_frame *precvframe, struct __queue *queue);
-void rtw_free_recvframe_queue(struct __queue *pframequeue,
-			      struct __queue *pfree_recv_queue);
-u32 rtw_free_uc_swdec_pending_queue(struct adapter *adapter);
-
-void rtw_reordering_ctrl_timeout_handler(struct timer_list *t);
-
-static inline s32 translate_percentage_to_dbm(u32 sig_stren_index)
-{
-	s32	power; /*  in dBm. */
-
-	/*  Translate to dBm (x=0.5y-95). */
-	power = (s32)((sig_stren_index + 1) >> 1);
-	power -= 95;
-
-	return power;
-}
-
-struct sta_info;
-
-void _rtw_init_sta_recv_priv(struct sta_recv_priv *psta_recvpriv);
-
-void  mgt_dispatcher(struct adapter *padapter, struct recv_frame *precv_frame);
-
-#endif