ath10k: Add wmi command support for station specific TID config

This patch adds WMI interface to configure station specific
TID configuration . Host needs to send station's MAC address
along with TID number and its configuration to target through
WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID.

WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT flag is added to advertise
this support.

Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021

Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593875614-5683-2-git-send-email-tamizhr@codeaurora.org

1 files changed, 54 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 511144b36231..cba9b23643ed 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -203,6 +203,7 @@ enum wmi_service {
 	WMI_SERVICE_SYNC_DELETE_CMDS,
 	WMI_SERVICE_TX_PWR_PER_PEER,
 	WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
+	WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 
 	/* Remember to add the new value to wmi_service_name()! */
 
@@ -503,6 +504,7 @@ static inline char *wmi_service_name(enum wmi_service service_id)
 	SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
 	SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
 	SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
+	SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
 
 	case WMI_SERVICE_MAX:
 		return NULL;
@@ -834,6 +836,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 	       WMI_SERVICE_TX_PWR_PER_PEER, len);
 	SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
 	       WMI_SERVICE_RESET_CHIP, len);
+	SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
+	       WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 }
 
 #undef SVCMAP
@@ -1036,6 +1040,7 @@ struct wmi_cmd_map {
 	u32 tdls_set_offchan_mode_cmdid;
 	u32 radar_found_cmdid;
 	u32 set_bb_timing_cmdid;
+	u32 per_peer_per_tid_config_cmdid;
 };
 
 /*
@@ -1877,6 +1882,8 @@ enum wmi_10_4_cmd_id {
 	WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
 	WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
 	WMI_10_4_RADAR_FOUND_CMDID,
+	WMI_10_4_PEER_CFR_CAPTURE_CMDID,
+	WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
 	WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
 };
 
@@ -7220,6 +7227,53 @@ struct wmi_tdls_peer_event {
 	__le32 vdev_id;
 } __packed;
 
+enum wmi_tid_aggr_control_conf {
+	WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
+	WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
+	WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
+};
+
+enum wmi_noack_tid_conf {
+	WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
+	WMI_PEER_TID_CONFIG_ACK,
+	WMI_PEER_TID_CONFIG_NOACK,
+};
+
+enum wmi_tid_rate_ctrl_conf {
+	WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
+	WMI_TID_CONFIG_RATE_CONTROL_AUTO,
+	WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
+	WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
+};
+
+struct wmi_per_peer_per_tid_cfg_arg {
+	u32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	u32 tid;
+	enum wmi_noack_tid_conf ack_policy;
+	enum wmi_tid_aggr_control_conf aggr_control;
+	u8 rate_ctrl;
+	u32 retry_count;
+	u32 rcode_flags;
+};
+
+struct wmi_peer_per_tid_cfg_cmd {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 tid;
+
+	/* see enum wmi_noack_tid_conf */
+	__le32 ack_policy;
+
+	/* see enum wmi_tid_aggr_control_conf */
+	__le32 aggr_control;
+
+	/* see enum wmi_tid_rate_ctrl_conf */
+	__le32 rate_control;
+	__le32 rcode_flags;
+	__le32 retry_count;
+} __packed;
+
 enum wmi_txbf_conf {
 	WMI_TXBF_CONF_UNSUPPORTED,
 	WMI_TXBF_CONF_BEFORE_ASSOC,