summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorShinya Kuribayashi <shinya.kuribayashi@necel.com>2009-11-06 21:43:52 +0900
committerBen Dooks <ben-linux@fluff.org>2009-12-09 00:19:09 +0000
commited5e1dd5f2daa8a59bc8116888417a6ff96d2ae9 (patch)
treee68b2585942c67b5f9627b90bbbcb9b1913d8161 /drivers/i2c
parent6035ccd8e9e40bb654fbfdef325902ab531679a5 (diff)
i2c-designware: Consolidate to use 32-bit word accesses
This driver looks originally meant for armel machines where readw()/ writew() works perfectly fine with this hardware. But that doens't work for big-endian systems. This patch converts all 8/16-bit-aware usages to 32-bit variants. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-designware.c76
1 files changed, 38 insertions, 38 deletions
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b444762e9b9f..a4f928e1fc5b 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -162,14 +162,14 @@ struct dw_i2c_dev {
struct i2c_msg *msgs;
int msgs_num;
int msg_write_idx;
- u16 tx_buf_len;
+ u32 tx_buf_len;
u8 *tx_buf;
int msg_read_idx;
- u16 rx_buf_len;
+ u32 rx_buf_len;
u8 *rx_buf;
int msg_err;
unsigned int status;
- u16 abort_source;
+ u32 abort_source;
int irq;
struct i2c_adapter adapter;
unsigned int tx_fifo_depth;
@@ -187,25 +187,25 @@ struct dw_i2c_dev {
static void i2c_dw_init(struct dw_i2c_dev *dev)
{
u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
- u16 ic_con;
+ u32 ic_con;
/* Disable the adapter */
- writeb(0, dev->base + DW_IC_ENABLE);
+ writel(0, dev->base + DW_IC_ENABLE);
/* set standard and fast speed deviders for high/low periods */
- writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
+ writel((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
dev->base + DW_IC_SS_SCL_HCNT);
- writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
+ writel((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
dev->base + DW_IC_SS_SCL_LCNT);
- writew((input_clock_khz * 6 / 10000)+1, /* fast speed high, 0.6us */
+ writel((input_clock_khz * 6 / 10000)+1, /* fast speed high, 0.6us */
dev->base + DW_IC_FS_SCL_HCNT);
- writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
+ writel((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
dev->base + DW_IC_FS_SCL_LCNT);
/* configure the i2c master */
ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
- writew(ic_con, dev->base + DW_IC_CON);
+ writel(ic_con, dev->base + DW_IC_CON);
}
/*
@@ -215,7 +215,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
{
int timeout = TIMEOUT;
- while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+ while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
if (timeout <= 0) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
return -ETIMEDOUT;
@@ -239,29 +239,29 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
struct i2c_msg *msgs = dev->msgs;
int num = dev->msgs_num;
- u16 ic_con, intr_mask;
- int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR);
- int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR);
- u16 addr = msgs[dev->msg_write_idx].addr;
- u16 buf_len = dev->tx_buf_len;
+ u32 ic_con, intr_mask;
+ int tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
+ int rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+ u32 addr = msgs[dev->msg_write_idx].addr;
+ u32 buf_len = dev->tx_buf_len;
if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
/* Disable the adapter */
- writeb(0, dev->base + DW_IC_ENABLE);
+ writel(0, dev->base + DW_IC_ENABLE);
/* set the slave (target) address */
- writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+ writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
/* if the slave address is ten bit address, enable 10BITADDR */
- ic_con = readw(dev->base + DW_IC_CON);
+ ic_con = readl(dev->base + DW_IC_CON);
if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
ic_con |= DW_IC_CON_10BITADDR_MASTER;
else
ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
- writew(ic_con, dev->base + DW_IC_CON);
+ writel(ic_con, dev->base + DW_IC_CON);
/* Enable the adapter */
- writeb(1, dev->base + DW_IC_ENABLE);
+ writel(1, dev->base + DW_IC_ENABLE);
}
for (; dev->msg_write_idx < num; dev->msg_write_idx++) {
@@ -287,10 +287,10 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
- writew(0x100, dev->base + DW_IC_DATA_CMD);
+ writel(0x100, dev->base + DW_IC_DATA_CMD);
rx_limit--;
} else
- writew(*(dev->tx_buf++),
+ writel(*(dev->tx_buf++),
dev->base + DW_IC_DATA_CMD);
tx_limit--; buf_len--;
}
@@ -302,7 +302,7 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
dev->status |= STATUS_WRITE_IN_PROGRESS;
} else
dev->status &= ~STATUS_WRITE_IN_PROGRESS;
- writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+ writel(intr_mask, dev->base + DW_IC_INTR_MASK);
dev->tx_buf_len = buf_len;
}
@@ -313,11 +313,11 @@ i2c_dw_read(struct i2c_adapter *adap)
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
struct i2c_msg *msgs = dev->msgs;
int num = dev->msgs_num;
- u16 addr = msgs[dev->msg_read_idx].addr;
- int rx_valid = readw(dev->base + DW_IC_RXFLR);
+ u32 addr = msgs[dev->msg_read_idx].addr;
+ int rx_valid = readl(dev->base + DW_IC_RXFLR);
for (; dev->msg_read_idx < num; dev->msg_read_idx++) {
- u16 len;
+ u32 len;
u8 *buf;
if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
@@ -336,7 +336,7 @@ i2c_dw_read(struct i2c_adapter *adap)
}
for (; len > 0 && rx_valid > 0; len--, rx_valid--)
- *buf++ = readb(dev->base + DW_IC_DATA_CMD);
+ *buf++ = readl(dev->base + DW_IC_DATA_CMD);
if (len > 0) {
dev->status |= STATUS_READ_IN_PROGRESS;
@@ -398,7 +398,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
do {
i2c_dw_read(adap);
} while (dev->status & STATUS_READ_IN_PROGRESS);
- writeb(0, dev->base + DW_IC_ENABLE);
+ writel(0, dev->base + DW_IC_ENABLE);
ret = num;
goto done;
}
@@ -428,7 +428,7 @@ static u32 i2c_dw_func(struct i2c_adapter *adap)
static void dw_i2c_pump_msg(unsigned long data)
{
struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
- u16 intr_mask;
+ u32 intr_mask;
i2c_dw_read(&dev->adapter);
i2c_dw_xfer_msg(&dev->adapter);
@@ -436,7 +436,7 @@ static void dw_i2c_pump_msg(unsigned long data)
intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
if (dev->status & STATUS_WRITE_IN_PROGRESS)
intr_mask |= DW_IC_INTR_TX_EMPTY;
- writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+ writel(intr_mask, dev->base + DW_IC_INTR_MASK);
}
/*
@@ -446,19 +446,19 @@ static void dw_i2c_pump_msg(unsigned long data)
static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
{
struct dw_i2c_dev *dev = dev_id;
- u16 stat;
+ u32 stat;
- stat = readw(dev->base + DW_IC_INTR_STAT);
+ stat = readl(dev->base + DW_IC_INTR_STAT);
dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
if (stat & DW_IC_INTR_TX_ABRT) {
- dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE);
+ dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
dev->cmd_err |= DW_IC_ERR_TX_ABRT;
dev->status = STATUS_IDLE;
} else if (stat & DW_IC_INTR_TX_EMPTY)
tasklet_schedule(&dev->pump_msg);
- readb(dev->base + DW_IC_CLR_INTR); /* clear interrupts */
- writew(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */
+ readl(dev->base + DW_IC_CLR_INTR); /* clear interrupts */
+ writel(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */
if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
complete(&dev->cmd_complete);
@@ -531,7 +531,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
}
i2c_dw_init(dev);
- writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+ writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev);
if (r) {
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
@@ -587,7 +587,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
clk_put(dev->clk);
dev->clk = NULL;
- writeb(0, dev->base + DW_IC_ENABLE);
+ writel(0, dev->base + DW_IC_ENABLE);
free_irq(dev->irq, dev);
kfree(dev);