Merge tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This s a very quiet release for the regulator API, we have a few new
  devices (most of which are just ID updates) and one new fairly
  specialist core feature for use in interrupt context.

   - An API allowing lockless enable/disable for regulators acquired in
     exclusive mode, for use in interrupt contexts

   - A rewrite of the MedaTek DVFSRC regulator driver which apparently
     never worked

   - Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
     RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13"

* tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
  regulator: dt-bindings: pca9450: Make interrupt optional
  regulator: pca9450: Make IRQ optional
  dt-bindings: regulator: sprd,sc2731-regulator: convert to YAML
  regulator: max77857: Constify struct regmap_config
  regulator: da9121: Constify struct regmap_config
  dt-bindings: regulator: ti,tps65132: document VIN supply
  dt-bindings: mfd: twl: Fix example
  regulator: Add Renesas RZ/G2L USB VBUS regulator driver
  regulator: core: Add helper for allow HW access to enable/disable regulator
  regulator: Add bindings for MediaTek DVFSRC Regulators
  regulator: Add refactored mtk-dvfsrc-regulator driver
  regulator: Remove mtk-dvfsrc-regulator.c
  regulator: userspace-consumer: quiet device deferral
  regulator: dt-bindings: mt6315: Document MT6319 PMIC
  regulator: add missing MODULE_DESCRIPTION() macro
  dt-bindings: regulator: twl-regulator: convert to yaml
  regulator: dt-bindings: describe the PMU module of the WCN7850 package
  regulator: dt-bindings: describe the PMU module of the QCA6390 package
  regulator: dt-bindings: rtq2208: Add specified fixed LDO VOUT property
  regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints
  ...

11 files changed, 484 insertions, 129 deletions

diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index c2357fecb56c..e94b0fd7af0f 100644
--- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
@@ -22,6 +22,32 @@ allOf:
           contains:
             const: ti,twl4030
     then:
+      patternProperties:
+        "^regulator-":
+          properties:
+            compatible:
+              enum:
+                - ti,twl4030-vaux1
+                - ti,twl4030-vaux2
+                - ti,twl4030-vaux3
+                - ti,twl4030-vaux4
+                - ti,twl4030-vmmc1
+                - ti,twl4030-vmmc2
+                - ti,twl4030-vpll1
+                - ti,twl4030-vpll2
+                - ti,twl4030-vsim
+                - ti,twl4030-vdac
+                - ti,twl4030-vintana2
+                - ti,twl4030-vio
+                - ti,twl4030-vdd1
+                - ti,twl4030-vdd2
+                - ti,twl4030-vintana1
+                - ti,twl4030-vintdig
+                - ti,twl4030-vusb1v5
+                - ti,twl4030-vusb1v8
+                - ti,twl4030-vusb3v1
+            ti,retain-on-reset: false
+
       properties:
         madc:
           type: object
@@ -50,13 +76,34 @@ allOf:
           properties:
             compatible:
               const: ti,twl4030-wdt
-
   - if:
       properties:
         compatible:
           contains:
             const: ti,twl6030
     then:
+      patternProperties:
+        "^regulator-":
+          properties:
+            compatible:
+              enum:
+                - ti,twl6030-vaux1
+                - ti,twl6030-vaux2
+                - ti,twl6030-vaux3
+                - ti,twl6030-vmmc
+                - ti,twl6030-vpp
+                - ti,twl6030-vusim
+                - ti,twl6030-vana
+                - ti,twl6030-vcxio
+                - ti,twl6030-vdac
+                - ti,twl6030-vusb
+                - ti,twl6030-v1v8
+                - ti,twl6030-v2v1
+                - ti,twl6030-vdd1
+                - ti,twl6030-vdd2
+                - ti,twl6030-vdd3
+            regulator-initial-mode: false
+
       properties:
         gpadc:
           type: object
@@ -69,6 +116,25 @@ allOf:
           contains:
             const: ti,twl6032
     then:
+      patternProperties:
+        "^regulator-":
+          properties:
+            compatible:
+              enum:
+                - ti,twl6032-ldo1
+                - ti,twl6032-ldo2
+                - ti,twl6032-ldo3
+                - ti,twl6032-ldo4
+                - ti,twl6032-ldo5
+                - ti,twl6032-ldo6
+                - ti,twl6032-ldo7
+                - ti,twl6032-ldoln
+                - ti,twl6032-ldousb
+                - ti,twl6032-smps3
+                - ti,twl6032-smps4
+                - ti,twl6032-vio
+            regulator-initial-mode: false
+
       properties:
         gpadc:
           type: object
@@ -112,6 +178,27 @@ properties:
       interrupts:
         maxItems: 1
 
+patternProperties:
+  "^regulator-":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml
+    properties:
+      compatible: true
+      regulator-initial-mode:
+        enum:
+          - 0x08 # Sleep mode, the nominal output voltage is maintained
+                 # with low power consumption with low load current capability
+          - 0x0e # Active mode, the regulator can deliver its nominal output
+                 # voltage with full-load current capability
+      ti,retain-on-reset:
+        description:
+          Does not turn off the supplies during warm
+          reset. Could be needed for VMMC, as TWL6030
+          reset sequence for this signal does not comply
+          with the SD specification.
+        type: boolean
+
 unevaluatedProperties: false
 
 required:
@@ -131,9 +218,85 @@ examples:
         compatible = "ti,twl6030";
         reg = <0x48>;
         interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */
+        interrupt-parent = <&gic>;
         interrupt-controller;
         #interrupt-cells = <1>;
-        interrupt-parent = <&gic>;
+
+        gpadc {
+          compatible = "ti,twl6030-gpadc";
+          interrupts = <6>;
+          #io-channel-cells = <1>;
+        };
+
+        rtc {
+          compatible = "ti,twl4030-rtc";
+          interrupts = <8>;
+        };
+
+        regulator-vaux1 {
+          compatible = "ti,twl6030-vaux1";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <3000000>;
+        };
+
+        regulator-vmmc1 {
+          compatible = "ti,twl6030-vmmc";
+          ti,retain-on-reset;
+        };
       };
     };
 
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@48 {
+        compatible = "ti,twl4030";
+        reg = <0x48>;
+        interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+        interrupt-parent = <&intc>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        bci {
+          compatible = "ti,twl4030-bci";
+          interrupts = <9>, <2>;
+          bci3v1-supply = <&vusb3v1>;
+          io-channels = <&twl_madc 11>;
+          io-channel-names = "vac";
+        };
+
+        twl_madc: madc {
+          compatible = "ti,twl4030-madc";
+          interrupts = <3>;
+          #io-channel-cells = <1>;
+        };
+
+        pwrbutton {
+          compatible = "ti,twl4030-pwrbutton";
+          interrupts = <8>;
+        };
+
+        rtc {
+          compatible = "ti,twl4030-rtc";
+          interrupts = <11>;
+        };
+
+        regulator-vaux1 {
+          compatible = "ti,twl4030-vaux1";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-initial-mode = <0xe>;
+        };
+
+        vusb3v1: regulator-vusb3v1 {
+          compatible = "ti,twl4030-vusb3v1";
+        };
+
+        watchdog {
+          compatible = "ti,twl4030-wdt";
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml
new file mode 100644
index 000000000000..704828687970
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6873-dvfsrc-regulator.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6873-dvfsrc-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DVFSRC-controlled Regulators
+
+description:
+  The Dynamic Voltage and Frequency Scaling Resource Collector Regulators
+  are controlled with votes to the DVFSRC hardware.
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6873-dvfsrc-regulator
+      - mediatek,mt8183-dvfsrc-regulator
+      - mediatek,mt8192-dvfsrc-regulator
+      - mediatek,mt8195-dvfsrc-regulator
+
+  dvfsrc-vcore:
+    description: DVFSRC-controlled SoC Vcore regulator
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+  dvfsrc-vscp:
+    description: DVFSRC-controlled System Control Processor regulator
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - dvfsrc-vcore
+  - required:
+      - dvfsrc-vscp
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 6317daf76d1f..cd4aa27218a1 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -16,7 +16,11 @@ description: |
 
 properties:
   compatible:
-    const: mediatek,mt6315-regulator
+    oneOf:
+      - items:
+          - const: mediatek,mt6319-regulator
+          - const: mediatek,mt6315-regulator
+      - const: mediatek,mt6315-regulator
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 849bfa50bdba..f8057bba747a 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -96,7 +96,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
   - regulators
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml
new file mode 100644
index 000000000000..3aaa9653419a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCA6390 PMU Regulators
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description:
+  The QCA6390 package contains discrete modules for WLAN and Bluetooth. They
+  are powered by the Power Management Unit (PMU) that takes inputs from the
+  host and provides LDO outputs. This document describes this module.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca6390-pmu
+      - qcom,wcn7850-pmu
+
+  vdd-supply:
+    description: VDD supply regulator handle
+
+  vddaon-supply:
+    description: VDD_AON supply regulator handle
+
+  vdddig-supply:
+    description: VDD_DIG supply regulator handle
+
+  vddpmu-supply:
+    description: VDD_PMU supply regulator handle
+
+  vddio1p2-supply:
+    description: VDD_IO_1P2 supply regulator handle
+
+  vddrfa0p95-supply:
+    description: VDD_RFA_0P95 supply regulator handle
+
+  vddrfa1p2-supply:
+    description: VDD_RFA_1P2 supply regulator handle
+
+  vddrfa1p3-supply:
+    description: VDD_RFA_1P3 supply regulator handle
+
+  vddrfa1p8-supply:
+    description: VDD_RFA_1P8 supply regulator handle
+
+  vddrfa1p9-supply:
+    description: VDD_RFA_1P9 supply regulator handle
+
+  vddpcie1p3-supply:
+    description: VDD_PCIE_1P3 supply regulator handle
+
+  vddpcie1p9-supply:
+    description: VDD_PCIE_1P9 supply regulator handle
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  wlan-enable-gpios:
+    maxItems: 1
+    description: GPIO line enabling the ATH11K WLAN module supplied by the PMU
+
+  bt-enable-gpios:
+    maxItems: 1
+    description: GPIO line enabling the ATH11K Bluetooth module supplied by the PMU
+
+  clocks:
+    maxItems: 1
+    description: Reference clock handle
+
+  regulators:
+    type: object
+    description:
+      LDO outputs of the PMU
+
+    patternProperties:
+      "^ldo[0-9]$":
+        $ref: regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - regulators
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,qca6390-pmu
+    then:
+      required:
+        - vddaon-supply
+        - vddpmu-supply
+        - vddrfa0p95-supply
+        - vddrfa1p3-supply
+        - vddrfa1p9-supply
+        - vddpcie1p3-supply
+        - vddpcie1p9-supply
+        - vddio-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,wcn7850-pmu
+    then:
+      required:
+        - vdd-supply
+        - vddio-supply
+        - vddaon-supply
+        - vdddig-supply
+        - vddrfa1p2-supply
+        - vddrfa1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pmu {
+        compatible = "qcom,qca6390-pmu";
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+        vddaon-supply = <&vreg_s6a_0p95>;
+        vddpmu-supply = <&vreg_s2f_0p95>;
+        vddrfa0p95-supply = <&vreg_s2f_0p95>;
+        vddrfa1p3-supply = <&vreg_s8c_1p3>;
+        vddrfa1p9-supply = <&vreg_s5a_1p9>;
+        vddpcie1p3-supply = <&vreg_s8c_1p3>;
+        vddpcie1p9-supply = <&vreg_s5a_1p9>;
+        vddio-supply = <&vreg_s4a_1p8>;
+
+        wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+        bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+        regulators {
+            vreg_pmu_rfa_cmn: ldo0 {
+                regulator-name = "vreg_pmu_rfa_cmn";
+            };
+
+            vreg_pmu_aon_0p59: ldo1 {
+                regulator-name = "vreg_pmu_aon_0p59";
+            };
+
+            vreg_pmu_wlcx_0p8: ldo2 {
+                regulator-name = "vreg_pmu_wlcx_0p8";
+            };
+
+            vreg_pmu_wlmx_0p85: ldo3 {
+                regulator-name = "vreg_pmu_wlmx_0p85";
+            };
+
+            vreg_pmu_btcmx_0p85: ldo4 {
+                regulator-name = "vreg_pmu_btcmx_0p85";
+            };
+
+            vreg_pmu_rfa_0p8: ldo5 {
+                regulator-name = "vreg_pmu_rfa_0p8";
+            };
+
+            vreg_pmu_rfa_1p2: ldo6 {
+                regulator-name = "vreg_pmu_rfa_1p2";
+            };
+
+            vreg_pmu_rfa_1p7: ldo7 {
+                regulator-name = "vreg_pmu_rfa_1p7";
+            };
+
+            vreg_pmu_pcie_0p9: ldo8 {
+                regulator-name = "vreg_pmu_pcie_0p9";
+            };
+
+            vreg_pmu_pcie_1p8: ldo9 {
+                regulator-name = "vreg_pmu_pcie_1p8";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
index 609c06615bdc..87accc6f13b8 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml
@@ -75,6 +75,12 @@ properties:
         description:
           regulator description for ldo[1-2].
 
+        properties:
+          richtek,fixed-microvolt:
+            description: |
+              This property can be used to set a fixed operating voltage that lies outside
+              the range of the regulator's adjustable mode.
+
 required:
   - compatible
   - reg
@@ -177,6 +183,8 @@ examples:
             };
           };
           ldo1 {
+            /* Fixed LDO VOUT */
+            richtek,fixed-microvolt = <1200000>;
             regulator-min-microvolt = <1200000>;
             regulator-max-microvolt = <1200000>;
             regulator-always-on;
@@ -185,7 +193,8 @@ examples:
             };
           };
           ldo2 {
-            regulator-min-microvolt = <3300000>;
+            /* Adjustable LDO VOUT */
+            regulator-min-microvolt = <1800000>;
             regulator-max-microvolt = <3300000>;
             regulator-always-on;
             regulator-state-mem {
diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt
deleted file mode 100644
index 63dc07877cd6..000000000000
--- a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Spreadtrum SC2731 Voltage regulators
-
-The SC2731 integrates low-voltage and low quiescent current DCDC/LDO.
-14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have
-their own bypass (power-down) control signals. External tantalum or MLCC
-ceramic capacitors are recommended to use with these LDOs.
-
-Required properties:
- - compatible: should be "sprd,sc27xx-regulator".
-
-List of regulators provided by this controller. It is named according to
-its regulator type, BUCK_<name> and LDO_<name>. The definition for each
-of these nodes is defined using the standard binding for regulators at
-Documentation/devicetree/bindings/regulator/regulator.txt.
-
-The valid names for regulators are:
-BUCK:
-	BUCK_CPU0, BUCK_CPU1, BUCK_RF
-LDO:
-	LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE,
-	LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON,
-	LDO_CAMIO, LDO_SRAM
-
-Example:
-	regulators {
-		compatible = "sprd,sc27xx-regulator";
-
-		vddarm0: BUCK_CPU0 {
-			regulator-name = "vddarm0";
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <1996875>;
-			regulator-ramp-delay = <25000>;
-			regulator-always-on;
-		};
-
-		vddcama0: LDO_CAMA0 {
-			regulator-name = "vddcama0";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3750000>;
-			regulator-enable-ramp-delay = <100>;
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.yaml b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.yaml
new file mode 100644
index 000000000000..ffb2924dde36
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/sprd,sc2731-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 Power Management IC regulators
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The SC2731 integrates low-voltage and low quiescent current DCDC/LDO.
+  14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have
+  their own bypass (power-down) control signals. It is recommended to use
+  external tantalum or MLCC ceramic capacitors with these LDOs.
+  Valid names for the regulators are:
+    BUCK:
+      BUCK_CPU0, BUCK_CPU1, BUCK_RF
+    LDO:
+      LDO_CAMA0, LDO_CAMA1, LDO_CAMD0, LDO_CAMD1, LDO_CAMIO, LDO_CAMMOT,
+      LDO_CON, LDO_EMMCCORE, LDO_SDCORE, LDO_SDIO, LDO_SRAM, LDO_USB33,
+      LDO_VLDO, LDO_WIFIPA
+
+properties:
+  compatible:
+    const: sprd,sc2731-regulator
+
+patternProperties:
+  "^BUCK_(CPU[0-1]|RF)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+  "^LDO_(CAM(A0|A1|D0|D1|IO|MOT)|CON|EMMCCORE|SD(CORE|IO)|SRAM|USB33|VLDO|WIFIPA)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    regulators {
+      compatible = "sprd,sc2731-regulator";
+
+      BUCK_CPU0 {
+        regulator-name = "vddarm0";
+        regulator-min-microvolt = <400000>;
+        regulator-max-microvolt = <1996875>;
+        regulator-ramp-delay = <25000>;
+        regulator-always-on;
+      };
+
+      LDO_CAMA0 {
+        regulator-name = "vddcama0";
+        regulator-min-microvolt = <1200000>;
+        regulator-max-microvolt = <3750000>;
+        regulator-enable-ramp-delay = <100>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index c9586d277f41..3cb2dad18781 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -11,7 +11,12 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32mp1,pwr-reg
+    oneOf:
+      - items:
+          - const: st,stm32mp1,pwr-reg
+      - items:
+          - const: st,stm32mp13-pwr-reg
+          - const: st,stm32mp1,pwr-reg
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml
index 6a6d1a3d6fa7..873d92738eb0 100644
--- a/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml
+++ b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml
@@ -23,6 +23,8 @@ properties:
   reg:
     maxItems: 1
 
+  vin-supply: true
+
 patternProperties:
   "^out[pn]$":
     type: object
@@ -65,6 +67,7 @@ examples:
         regulator@3e {
             compatible = "ti,tps65132";
             reg = <0x3e>;
+            vin-supply = <&supply>;
 
             outp {
                 regulator-name = "outp";
diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt
deleted file mode 100644
index 549f80436deb..000000000000
--- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-TWL family of regulators
-
-Required properties:
-For twl6030 regulators/LDOs
-- compatible:
-  - "ti,twl6030-vaux1" for VAUX1 LDO
-  - "ti,twl6030-vaux2" for VAUX2 LDO
-  - "ti,twl6030-vaux3" for VAUX3 LDO
-  - "ti,twl6030-vmmc" for VMMC LDO
-  - "ti,twl6030-vpp" for VPP LDO
-  - "ti,twl6030-vusim" for VUSIM LDO
-  - "ti,twl6030-vana" for VANA LDO
-  - "ti,twl6030-vcxio" for VCXIO LDO
-  - "ti,twl6030-vdac" for VDAC LDO
-  - "ti,twl6030-vusb" for VUSB LDO
-  - "ti,twl6030-v1v8" for V1V8 LDO
-  - "ti,twl6030-v2v1" for V2V1 LDO
-  - "ti,twl6030-vdd1" for VDD1 SMPS
-  - "ti,twl6030-vdd2" for VDD2 SMPS
-  - "ti,twl6030-vdd3" for VDD3 SMPS
-For twl6032 regulators/LDOs
-- compatible:
-  - "ti,twl6032-ldo1" for LDO1 LDO
-  - "ti,twl6032-ldo2" for LDO2 LDO
-  - "ti,twl6032-ldo3" for LDO3 LDO
-  - "ti,twl6032-ldo4" for LDO4 LDO
-  - "ti,twl6032-ldo5" for LDO5 LDO
-  - "ti,twl6032-ldo6" for LDO6 LDO
-  - "ti,twl6032-ldo7" for LDO7 LDO
-  - "ti,twl6032-ldoln" for LDOLN LDO
-  - "ti,twl6032-ldousb" for LDOUSB LDO
-  - "ti,twl6032-smps3" for SMPS3 SMPS
-  - "ti,twl6032-smps4" for SMPS4 SMPS
-  - "ti,twl6032-vio" for VIO SMPS
-For twl4030 regulators/LDOs
-- compatible:
-  - "ti,twl4030-vaux1" for VAUX1 LDO
-  - "ti,twl4030-vaux2" for VAUX2 LDO
-  - "ti,twl5030-vaux2" for VAUX2 LDO
-  - "ti,twl4030-vaux3" for VAUX3 LDO
-  - "ti,twl4030-vaux4" for VAUX4 LDO
-  - "ti,twl4030-vmmc1" for VMMC1 LDO
-  - "ti,twl4030-vmmc2" for VMMC2 LDO
-  - "ti,twl4030-vpll1" for VPLL1 LDO
-  - "ti,twl4030-vpll2" for VPLL2 LDO
-  - "ti,twl4030-vsim" for VSIM LDO
-  - "ti,twl4030-vdac" for VDAC LDO
-  - "ti,twl4030-vintana2" for VINTANA2 LDO
-  - "ti,twl4030-vio" for VIO LDO
-  - "ti,twl4030-vdd1" for VDD1 SMPS
-  - "ti,twl4030-vdd2" for VDD2 SMPS
-  - "ti,twl4030-vintana1" for VINTANA1 LDO
-  - "ti,twl4030-vintdig" for VINTDIG LDO
-  - "ti,twl4030-vusb1v5" for VUSB1V5 LDO
-  - "ti,twl4030-vusb1v8" for VUSB1V8 LDO
-  - "ti,twl4030-vusb3v1" for VUSB3V1 LDO
-
-Optional properties:
-- Any optional property defined in bindings/regulator/regulator.txt
-For twl4030 regulators/LDOs:
- - regulator-initial-mode:
-  - 0x08 - Sleep mode, the nominal output voltage is maintained with low power
-           consumption with low load current capability.
-  - 0x0e - Active mode, the regulator can deliver its nominal output voltage
-           with full-load current capability.
-
-Example:
-
-	xyz: regulator@0 {
-		compatible = "ti,twl6030-vaux1";
-		regulator-min-microvolt  = <1000000>;
-		regulator-max-microvolt  = <3000000>;
-	};
-
-For twl6030 regulators/LDOs:
-
- - ti,retain-on-reset: Does not turn off the supplies during warm
-                       reset. Could be needed for VMMC, as TWL6030
-                       reset sequence for this signal does not comply
-                       with the SD specification.