1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
// SPDX-License-Identifier: GPL-2.0
/*
* Dummy driver for Intel's Image Signal Processor found on Bay and Cherry
* Trail devices. The sole purpose of this driver is to allow the ISP to
* be put in D3.
*
* Copyright (C) 2018 Hans de Goede <hdegoede@redhat.com>
*
* Based on various non upstream patches for ISP support:
* Copyright (C) 2010-2017 Intel Corporation. All rights reserved.
* Copyright (c) 2010 Silicon Hive www.siliconhive.com.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <asm/iosf_mbi.h>
/* PCI configuration regs */
#define PCI_INTERRUPT_CTRL 0x9c
#define PCI_CSI_CONTROL 0xe8
#define PCI_CSI_CONTROL_PORTS_OFF_MASK 0x7
/* IOSF BT_MBI_UNIT_PMC regs */
#define ISPSSPM0 0x39
#define ISPSSPM0_ISPSSC_OFFSET 0
#define ISPSSPM0_ISPSSC_MASK 0x00000003
#define ISPSSPM0_ISPSSS_OFFSET 24
#define ISPSSPM0_ISPSSS_MASK 0x03000000
#define ISPSSPM0_IUNIT_POWER_ON 0x0
#define ISPSSPM0_IUNIT_POWER_OFF 0x3
static int isp_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned long timeout;
u32 val;
pci_write_config_dword(dev, PCI_INTERRUPT_CTRL, 0);
/*
* MRFLD IUNIT DPHY is located in an always-power-on island
* MRFLD HW design need all CSI ports are disabled before
* powering down the IUNIT.
*/
pci_read_config_dword(dev, PCI_CSI_CONTROL, &val);
val |= PCI_CSI_CONTROL_PORTS_OFF_MASK;
pci_write_config_dword(dev, PCI_CSI_CONTROL, val);
/* Write 0x3 to ISPSSPM0 bit[1:0] to power off the IUNIT */
iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0,
ISPSSPM0_IUNIT_POWER_OFF, ISPSSPM0_ISPSSC_MASK);
/*
* There should be no IUNIT access while power-down is
* in progress HW sighting: 4567865
* Wait up to 50 ms for the IUNIT to shut down.
*/
timeout = jiffies + msecs_to_jiffies(50);
while (1) {
/* Wait until ISPSSPM0 bit[25:24] shows 0x3 */
iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, ISPSSPM0, &val);
val = (val & ISPSSPM0_ISPSSS_MASK) >> ISPSSPM0_ISPSSS_OFFSET;
if (val == ISPSSPM0_IUNIT_POWER_OFF)
break;
if (time_after(jiffies, timeout)) {
dev_err(&dev->dev, "IUNIT power-off timeout.\n");
return -EBUSY;
}
usleep_range(1000, 2000);
}
pm_runtime_allow(&dev->dev);
pm_runtime_put_sync_suspend(&dev->dev);
return 0;
}
static void isp_remove(struct pci_dev *dev)
{
pm_runtime_get_sync(&dev->dev);
pm_runtime_forbid(&dev->dev);
}
static int isp_pci_suspend(struct device *dev)
{
return 0;
}
static int isp_pci_resume(struct device *dev)
{
return 0;
}
static UNIVERSAL_DEV_PM_OPS(isp_pm_ops, isp_pci_suspend,
isp_pci_resume, NULL);
static const struct pci_device_id isp_id_table[] = {
{ PCI_VDEVICE(INTEL, 0x22b8), },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, isp_id_table);
static struct pci_driver isp_pci_driver = {
.name = "intel_atomisp2_pm",
.id_table = isp_id_table,
.probe = isp_probe,
.remove = isp_remove,
.driver.pm = &isp_pm_ops,
};
module_pci_driver(isp_pci_driver);
MODULE_DESCRIPTION("Intel AtomISP2 dummy / power-management drv (for suspend)");
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL v2");
|
