1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
|
// SPDX-License-Identifier: BSD-3-Clause
/* Copyright (c) 2016-2018, NXP Semiconductors
* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH
* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
*/
#include <linux/spi/spi.h>
#include <linux/packing.h>
#include "sja1105.h"
#define SJA1105_SIZE_PORT_CTRL 4
#define SJA1105_SIZE_RESET_CMD 4
#define SJA1105_SIZE_SPI_MSG_HEADER 4
#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4)
#define SJA1105_SIZE_SPI_TRANSFER_MAX \
(SJA1105_SIZE_SPI_MSG_HEADER + SJA1105_SIZE_SPI_MSG_MAXLEN)
static int sja1105_spi_transfer(const struct sja1105_private *priv,
const void *tx, void *rx, int size)
{
struct spi_device *spi = priv->spidev;
struct spi_transfer transfer = {
.tx_buf = tx,
.rx_buf = rx,
.len = size,
};
struct spi_message msg;
int rc;
if (size > SJA1105_SIZE_SPI_TRANSFER_MAX) {
dev_err(&spi->dev, "SPI message (%d) longer than max of %d\n",
size, SJA1105_SIZE_SPI_TRANSFER_MAX);
return -EMSGSIZE;
}
spi_message_init(&msg);
spi_message_add_tail(&transfer, &msg);
rc = spi_sync(spi, &msg);
if (rc < 0) {
dev_err(&spi->dev, "SPI transfer failed: %d\n", rc);
return rc;
}
return rc;
}
static void
sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg)
{
const int size = SJA1105_SIZE_SPI_MSG_HEADER;
memset(buf, 0, size);
sja1105_pack(buf, &msg->access, 31, 31, size);
sja1105_pack(buf, &msg->read_count, 30, 25, size);
sja1105_pack(buf, &msg->address, 24, 4, size);
}
/* If @rw is:
* - SPI_WRITE: creates and sends an SPI write message at absolute
* address reg_addr, taking size_bytes from *packed_buf
* - SPI_READ: creates and sends an SPI read message from absolute
* address reg_addr, writing size_bytes into *packed_buf
*
* This function should only be called if it is priorly known that
* @size_bytes is smaller than SIZE_SPI_MSG_MAXLEN. Larger packed buffers
* are chunked in smaller pieces by sja1105_spi_send_long_packed_buf below.
*/
int sja1105_spi_send_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 reg_addr,
void *packed_buf, size_t size_bytes)
{
u8 tx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0};
u8 rx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0};
const int msg_len = size_bytes + SJA1105_SIZE_SPI_MSG_HEADER;
struct sja1105_spi_message msg = {0};
int rc;
if (msg_len > SJA1105_SIZE_SPI_TRANSFER_MAX)
return -ERANGE;
msg.access = rw;
msg.address = reg_addr;
if (rw == SPI_READ)
msg.read_count = size_bytes / 4;
sja1105_spi_message_pack(tx_buf, &msg);
if (rw == SPI_WRITE)
memcpy(tx_buf + SJA1105_SIZE_SPI_MSG_HEADER,
packed_buf, size_bytes);
rc = sja1105_spi_transfer(priv, tx_buf, rx_buf, msg_len);
if (rc < 0)
return rc;
if (rw == SPI_READ)
memcpy(packed_buf, rx_buf + SJA1105_SIZE_SPI_MSG_HEADER,
size_bytes);
return 0;
}
/* If @rw is:
* - SPI_WRITE: creates and sends an SPI write message at absolute
* address reg_addr, taking size_bytes from *packed_buf
* - SPI_READ: creates and sends an SPI read message from absolute
* address reg_addr, writing size_bytes into *packed_buf
*
* The u64 *value is unpacked, meaning that it's stored in the native
* CPU endianness and directly usable by software running on the core.
*
* This is a wrapper around sja1105_spi_send_packed_buf().
*/
int sja1105_spi_send_int(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 reg_addr,
u64 *value, u64 size_bytes)
{
u8 packed_buf[SJA1105_SIZE_SPI_MSG_MAXLEN];
int rc;
if (size_bytes > SJA1105_SIZE_SPI_MSG_MAXLEN)
return -ERANGE;
if (rw == SPI_WRITE)
sja1105_pack(packed_buf, value, 8 * size_bytes - 1, 0,
size_bytes);
rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf,
size_bytes);
if (rw == SPI_READ)
sja1105_unpack(packed_buf, value, 8 * size_bytes - 1, 0,
size_bytes);
return rc;
}
/* Should be used if a @packed_buf larger than SJA1105_SIZE_SPI_MSG_MAXLEN
* must be sent/received. Splitting the buffer into chunks and assembling
* those into SPI messages is done automatically by this function.
*/
int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 base_addr,
void *packed_buf, u64 buf_len)
{
struct chunk {
void *buf_ptr;
int len;
u64 spi_address;
} chunk;
int distance_to_end;
int rc;
/* Initialize chunk */
chunk.buf_ptr = packed_buf;
chunk.spi_address = base_addr;
chunk.len = min_t(int, buf_len, SJA1105_SIZE_SPI_MSG_MAXLEN);
while (chunk.len) {
rc = sja1105_spi_send_packed_buf(priv, rw, chunk.spi_address,
chunk.buf_ptr, chunk.len);
if (rc < 0)
return rc;
chunk.buf_ptr += chunk.len;
chunk.spi_address += chunk.len / 4;
distance_to_end = (uintptr_t)(packed_buf + buf_len -
chunk.buf_ptr);
chunk.len = min(distance_to_end, SJA1105_SIZE_SPI_MSG_MAXLEN);
}
return 0;
}
/* Back-ported structure from UM11040 Table 112.
* Reset control register (addr. 100440h)
* In the SJA1105 E/T, only warm_rst and cold_rst are
* supported (exposed in UM10944 as rst_ctrl), but the bit
* offsets of warm_rst and cold_rst are actually reversed.
*/
struct sja1105_reset_cmd {
u64 switch_rst;
u64 cfg_rst;
u64 car_rst;
u64 otp_rst;
u64 warm_rst;
u64 cold_rst;
u64 por_rst;
};
static void
sja1105et_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset)
{
const int size = SJA1105_SIZE_RESET_CMD;
memset(buf, 0, size);
sja1105_pack(buf, &reset->cold_rst, 3, 3, size);
sja1105_pack(buf, &reset->warm_rst, 2, 2, size);
}
static void
sja1105pqrs_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset)
{
const int size = SJA1105_SIZE_RESET_CMD;
memset(buf, 0, size);
sja1105_pack(buf, &reset->switch_rst, 8, 8, size);
sja1105_pack(buf, &reset->cfg_rst, 7, 7, size);
sja1105_pack(buf, &reset->car_rst, 5, 5, size);
sja1105_pack(buf, &reset->otp_rst, 4, 4, size);
sja1105_pack(buf, &reset->warm_rst, 3, 3, size);
sja1105_pack(buf, &reset->cold_rst, 2, 2, size);
sja1105_pack(buf, &reset->por_rst, 1, 1, size);
}
static int sja1105et_reset_cmd(const void *ctx, const void *data)
{
const struct sja1105_private *priv = ctx;
const struct sja1105_reset_cmd *reset = data;
const struct sja1105_regs *regs = priv->info->regs;
struct device *dev = priv->ds->dev;
u8 packed_buf[SJA1105_SIZE_RESET_CMD];
if (reset->switch_rst ||
reset->cfg_rst ||
reset->car_rst ||
reset->otp_rst ||
reset->por_rst) {
dev_err(dev, "Only warm and cold reset is supported "
"for SJA1105 E/T!\n");
return -EINVAL;
}
if (reset->warm_rst)
dev_dbg(dev, "Warm reset requested\n");
if (reset->cold_rst)
dev_dbg(dev, "Cold reset requested\n");
sja1105et_reset_cmd_pack(packed_buf, reset);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu,
packed_buf, SJA1105_SIZE_RESET_CMD);
}
static int sja1105pqrs_reset_cmd(const void *ctx, const void *data)
{
const struct sja1105_private *priv = ctx;
const struct sja1105_reset_cmd *reset = data;
const struct sja1105_regs *regs = priv->info->regs;
struct device *dev = priv->ds->dev;
u8 packed_buf[SJA1105_SIZE_RESET_CMD];
if (reset->switch_rst)
dev_dbg(dev, "Main reset for all functional modules requested\n");
if (reset->cfg_rst)
dev_dbg(dev, "Chip configuration reset requested\n");
if (reset->car_rst)
dev_dbg(dev, "Clock and reset control logic reset requested\n");
if (reset->otp_rst)
dev_dbg(dev, "OTP read cycle for reading product "
"config settings requested\n");
if (reset->warm_rst)
dev_dbg(dev, "Warm reset requested\n");
if (reset->cold_rst)
dev_dbg(dev, "Cold reset requested\n");
if (reset->por_rst)
dev_dbg(dev, "Power-on reset requested\n");
sja1105pqrs_reset_cmd_pack(packed_buf, reset);
return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu,
packed_buf, SJA1105_SIZE_RESET_CMD);
}
static int sja1105_cold_reset(const struct sja1105_private *priv)
{
struct sja1105_reset_cmd reset = {0};
reset.cold_rst = 1;
return priv->info->reset_cmd(priv, &reset);
}
static int sja1105_inhibit_tx(const struct sja1105_private *priv,
const unsigned long *port_bitmap)
{
const struct sja1105_regs *regs = priv->info->regs;
u64 inhibit_cmd;
int port, rc;
rc = sja1105_spi_send_int(priv, SPI_READ, regs->port_control,
&inhibit_cmd, SJA1105_SIZE_PORT_CTRL);
if (rc < 0)
return rc;
for_each_set_bit(port, port_bitmap, SJA1105_NUM_PORTS)
inhibit_cmd |= BIT(port);
return sja1105_spi_send_int(priv, SPI_WRITE, regs->port_control,
&inhibit_cmd, SJA1105_SIZE_PORT_CTRL);
}
struct sja1105_status {
u64 configs;
u64 crcchkl;
u64 ids;
u64 crcchkg;
};
/* This is not reading the entire General Status area, which is also
* divergent between E/T and P/Q/R/S, but only the relevant bits for
* ensuring that the static config upload procedure was successful.
*/
static void sja1105_status_unpack(void *buf, struct sja1105_status *status)
{
/* So that addition translates to 4 bytes */
u32 *p = buf;
/* device_id is missing from the buffer, but we don't
* want to diverge from the manual definition of the
* register addresses, so we'll back off one step with
* the register pointer, and never access p[0].
*/
p--;
sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4);
sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4);
sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4);
sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4);
}
static int sja1105_status_get(struct sja1105_private *priv,
struct sja1105_status *status)
{
const struct sja1105_regs *regs = priv->info->regs;
u8 packed_buf[4];
int rc;
rc = sja1105_spi_send_packed_buf(priv, SPI_READ,
regs->status,
packed_buf, 4);
if (rc < 0)
return rc;
sja1105_status_unpack(packed_buf, status);
return 0;
}
/* Not const because unpacking priv->static_config into buffers and preparing
* for upload requires the recalculation of table CRCs and updating the
* structures with these.
*/
static int
static_config_buf_prepare_for_upload(struct sja1105_private *priv,
void *config_buf, int buf_len)
{
struct sja1105_static_config *config = &priv->static_config;
struct sja1105_table_header final_header;
sja1105_config_valid_t valid;
char *final_header_ptr;
int crc_len;
valid = sja1105_static_config_check_valid(config);
if (valid != SJA1105_CONFIG_OK) {
dev_err(&priv->spidev->dev,
sja1105_static_config_error_msg[valid]);
return -EINVAL;
}
/* Write Device ID and config tables to config_buf */
sja1105_static_config_pack(config_buf, config);
/* Recalculate CRC of the last header (right now 0xDEADBEEF).
* Don't include the CRC field itself.
*/
crc_len = buf_len - 4;
/* Read the whole table header */
final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER;
sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK);
/* Modify */
final_header.crc = sja1105_crc32(config_buf, crc_len);
/* Rewrite */
sja1105_table_header_packing(final_header_ptr, &final_header, PACK);
return 0;
}
#define RETRIES 10
int sja1105_static_config_upload(struct sja1105_private *priv)
{
unsigned long port_bitmap = GENMASK_ULL(SJA1105_NUM_PORTS - 1, 0);
struct sja1105_static_config *config = &priv->static_config;
const struct sja1105_regs *regs = priv->info->regs;
struct device *dev = &priv->spidev->dev;
struct sja1105_status status;
int rc, retries = RETRIES;
u8 *config_buf;
int buf_len;
buf_len = sja1105_static_config_get_length(config);
config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL);
if (!config_buf)
return -ENOMEM;
rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len);
if (rc < 0) {
dev_err(dev, "Invalid config, cannot upload\n");
return -EINVAL;
}
/* Prevent PHY jabbering during switch reset by inhibiting
* Tx on all ports and waiting for current packet to drain.
* Otherwise, the PHY will see an unterminated Ethernet packet.
*/
rc = sja1105_inhibit_tx(priv, &port_bitmap);
if (rc < 0) {
dev_err(dev, "Failed to inhibit Tx on ports\n");
return -ENXIO;
}
/* Wait for an eventual egress packet to finish transmission
* (reach IFG). It is guaranteed that a second one will not
* follow, and that switch cold reset is thus safe
*/
usleep_range(500, 1000);
do {
/* Put the SJA1105 in programming mode */
rc = sja1105_cold_reset(priv);
if (rc < 0) {
dev_err(dev, "Failed to reset switch, retrying...\n");
continue;
}
/* Wait for the switch to come out of reset */
usleep_range(1000, 5000);
/* Upload the static config to the device */
rc = sja1105_spi_send_long_packed_buf(priv, SPI_WRITE,
regs->config,
config_buf, buf_len);
if (rc < 0) {
dev_err(dev, "Failed to upload config, retrying...\n");
continue;
}
/* Check that SJA1105 responded well to the config upload */
rc = sja1105_status_get(priv, &status);
if (rc < 0)
continue;
if (status.ids == 1) {
dev_err(dev, "Mismatch between hardware and static config "
"device id. Wrote 0x%llx, wants 0x%llx\n",
config->device_id, priv->info->device_id);
continue;
}
if (status.crcchkl == 1) {
dev_err(dev, "Switch reported invalid local CRC on "
"the uploaded config, retrying...\n");
continue;
}
if (status.crcchkg == 1) {
dev_err(dev, "Switch reported invalid global CRC on "
"the uploaded config, retrying...\n");
continue;
}
if (status.configs == 0) {
dev_err(dev, "Switch reported that configuration is "
"invalid, retrying...\n");
continue;
}
} while (--retries && (status.crcchkl == 1 || status.crcchkg == 1 ||
status.configs == 0 || status.ids == 1));
if (!retries) {
rc = -EIO;
dev_err(dev, "Failed to upload config to device, giving up\n");
goto out;
} else if (retries != RETRIES - 1) {
dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries);
}
dev_info(dev, "Reset switch and programmed static config\n");
out:
kfree(config_buf);
return rc;
}
struct sja1105_regs sja1105et_regs = {
.device_id = 0x0,
.prod_id = 0x100BC3,
.status = 0x1,
.port_control = 0x11,
.config = 0x020000,
.rgu = 0x100440,
.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.rmii_pll1 = 0x10000A,
.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
/* UM10944.pdf, Table 86, ACU Register overview */
.rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.mac = {0x200, 0x202, 0x204, 0x206, 0x208},
.mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440},
.mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640},
/* UM10944.pdf, Table 78, CGU Register overview */
.mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F},
.mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030},
.mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
.mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035},
.rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032},
.rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031},
.rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
};
struct sja1105_regs sja1105pqrs_regs = {
.device_id = 0x0,
.prod_id = 0x100BC3,
.status = 0x1,
.port_control = 0x12,
.config = 0x020000,
.rgu = 0x100440,
.pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.rmii_pll1 = 0x10000A,
.cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
/* UM10944.pdf, Table 86, ACU Register overview */
.rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
.mac = {0x200, 0x202, 0x204, 0x206, 0x208},
.mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440},
.mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640},
/* UM11040.pdf, Table 114 */
.mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B},
.mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C},
.mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
.mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030},
.rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E},
.rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D},
.rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
.qlevel = {0x604, 0x614, 0x624, 0x634, 0x644},
};
struct sja1105_info sja1105e_info = {
.device_id = SJA1105E_DEVICE_ID,
.part_no = SJA1105ET_PART_NO,
.static_ops = sja1105e_table_ops,
.dyn_ops = sja1105et_dyn_ops,
.reset_cmd = sja1105et_reset_cmd,
.regs = &sja1105et_regs,
.name = "SJA1105E",
};
struct sja1105_info sja1105t_info = {
.device_id = SJA1105T_DEVICE_ID,
.part_no = SJA1105ET_PART_NO,
.static_ops = sja1105t_table_ops,
.dyn_ops = sja1105et_dyn_ops,
.reset_cmd = sja1105et_reset_cmd,
.regs = &sja1105et_regs,
.name = "SJA1105T",
};
struct sja1105_info sja1105p_info = {
.device_id = SJA1105PR_DEVICE_ID,
.part_no = SJA1105P_PART_NO,
.static_ops = sja1105p_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.reset_cmd = sja1105pqrs_reset_cmd,
.regs = &sja1105pqrs_regs,
.name = "SJA1105P",
};
struct sja1105_info sja1105q_info = {
.device_id = SJA1105QS_DEVICE_ID,
.part_no = SJA1105Q_PART_NO,
.static_ops = sja1105q_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.reset_cmd = sja1105pqrs_reset_cmd,
.regs = &sja1105pqrs_regs,
.name = "SJA1105Q",
};
struct sja1105_info sja1105r_info = {
.device_id = SJA1105PR_DEVICE_ID,
.part_no = SJA1105R_PART_NO,
.static_ops = sja1105r_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.reset_cmd = sja1105pqrs_reset_cmd,
.regs = &sja1105pqrs_regs,
.name = "SJA1105R",
};
struct sja1105_info sja1105s_info = {
.device_id = SJA1105QS_DEVICE_ID,
.part_no = SJA1105S_PART_NO,
.static_ops = sja1105s_table_ops,
.dyn_ops = sja1105pqrs_dyn_ops,
.regs = &sja1105pqrs_regs,
.reset_cmd = sja1105pqrs_reset_cmd,
.name = "SJA1105S",
};
|