path: root/arch/arm64/kernel/ftrace.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * arch/arm64/kernel/ftrace.c
 *
 * Copyright (C) 2013 Linaro Limited
 * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
 */

#include <linux/ftrace.h>
#include <linux/module.h>
#include <linux/swab.h>
#include <linux/uaccess.h>

#include <asm/cacheflush.h>
#include <asm/debug-monitors.h>
#include <asm/ftrace.h>
#include <asm/insn.h>

#ifdef CONFIG_DYNAMIC_FTRACE
/*
 * Replace a single instruction, which may be a branch or NOP.
 * If @validate == true, a replaced instruction is checked against 'old'.
 */
static int ftrace_modify_code(unsigned long pc, u32 old, u32 new,
			      bool validate)
{
	u32 replaced;

	/*
	 * Note:
	 * We are paranoid about modifying text, as if a bug were to happen, it
	 * could cause us to read or write to someplace that could cause harm.
	 * Carefully read and modify the code with aarch64_insn_*() which uses
	 * probe_kernel_*(), and make sure what we read is what we expected it
	 * to be before modifying it.
	 */
	if (validate) {
		if (aarch64_insn_read((void *)pc, &replaced))
			return -EFAULT;

		if (replaced != old)
			return -EINVAL;
	}
	if (aarch64_insn_patch_text_nosync((void *)pc, new))
		return -EPERM;

	return 0;
}

/*
 * Replace tracer function in ftrace_caller()
 */
int ftrace_update_ftrace_func(ftrace_func_t func)
{
	unsigned long pc;
	u32 new;

	pc = (unsigned long)&ftrace_call;
	new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func,
					  AARCH64_INSN_BRANCH_LINK);

	return ftrace_modify_code(pc, 0, new, false);
}

/*
 * Turn on the call to ftrace_caller() in instrumented function
 */
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
	unsigned long pc = rec->ip;
	u32 old, new;
	long offset = (long)pc - (long)addr;

	if (offset < -SZ_128M || offset >= SZ_128M) {
#ifdef CONFIG_ARM64_MODULE_PLTS
		struct plt_entry trampoline, *dst;
		struct module *mod;

		/*
		 * On kernels that support module PLTs, the offset between the
		 * branch instruction and its target may legally exceed the
		 * range of an ordinary relative 'bl' opcode. In this case, we
		 * need to branch via a trampoline in the module.
		 *
		 * NOTE: __module_text_address() must be called with preemption
		 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
		 * retains its validity throughout the remainder of this code.
		 */
		preempt_disable();
		mod = __module_text_address(pc);
		preempt_enable();

		if (WARN_ON(!mod))
			return -EINVAL;

		/*
		 * There is only one ftrace trampoline per module. For now,
		 * this is not a problem since on arm64, all dynamic ftrace
		 * invocations are routed via ftrace_caller(). This will need
		 * to be revisited if support for multiple ftrace entry points
		 * is added in the future, but for now, the pr_err() below
		 * deals with a theoretical issue only.
		 *
		 * Note that PLTs are place relative, and plt_entries_equal()
		 * checks whether they point to the same target. Here, we need
		 * to check if the actual opcodes are in fact identical,
		 * regardless of the offset in memory so use memcmp() instead.
		 */
		dst = mod->arch.ftrace_trampoline;
		trampoline = get_plt_entry(addr, dst);
		if (memcmp(dst, &trampoline, sizeof(trampoline))) {
			if (plt_entry_is_initialized(dst)) {
				pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n");
				return -EINVAL;
			}

			/* point the trampoline to our ftrace entry point */
			module_disable_ro(mod);
			*dst = trampoline;
			module_enable_ro(mod, true);

			/*
			 * Ensure updated trampoline is visible to instruction
			 * fetch before we patch in the branch. Although the
			 * architecture doesn't require an IPI in this case,
			 * Neoverse-N1 erratum #1542419 does require one
			 * if the TLB maintenance in module_enable_ro() is
			 * skipped due to rodata_enabled. It doesn't seem worth
			 * it to make it conditional given that this is
			 * certainly not a fast-path.
			 */
			flush_icache_range((unsigned long)&dst[0],
					   (unsigned long)&dst[1]);
		}
		addr = (unsigned long)dst;
#else /* CONFIG_ARM64_MODULE_PLTS */
		return -EINVAL;
#endif /* CONFIG_ARM64_MODULE_PLTS */
	}

	old = aarch64_insn_gen_nop();
	new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);

	return ftrace_modify_code(pc, old, new, true);
}

/*
 * Turn off the call to ftrace_caller() in instrumented function
 */
int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
		    unsigned long addr)
{
	unsigned long pc = rec->ip;
	bool validate = true;
	u32 old = 0, new;
	long offset = (long)pc - (long)addr;

	if (offset < -SZ_128M || offset >= SZ_128M) {
#ifdef CONFIG_ARM64_MODULE_PLTS
		u32 replaced;

		/*
		 * 'mod' is only set at module load time, but if we end up
		 * dealing with an out-of-range condition, we can assume it
		 * is due to a module being loaded far away from the kernel.
		 */
		if (!mod) {
			preempt_disable();
			mod = __module_text_address(pc);
			preempt_enable();

			if (WARN_ON(!mod))
				return -EINVAL;
		}

		/*
		 * The instruction we are about to patch may be a branch and
		 * link instruction that was redirected via a PLT entry. In
		 * this case, the normal validation will fail, but we can at
		 * least check that we are dealing with a branch and link
		 * instruction that points into the right module.
		 */
		if (aarch64_insn_read((void *)pc, &replaced))
			return -EFAULT;

		if (!aarch64_insn_is_bl(replaced) ||
		    !within_module(pc + aarch64_get_branch_offset(replaced),
				   mod))
			return -EINVAL;

		validate = false;
#else /* CONFIG_ARM64_MODULE_PLTS */
		return -EINVAL;
#endif /* CONFIG_ARM64_MODULE_PLTS */
	} else {
		old = aarch64_insn_gen_branch_imm(pc, addr,
						  AARCH64_INSN_BRANCH_LINK);
	}

	new = aarch64_insn_gen_nop();

	return ftrace_modify_code(pc, old, new, validate);
}

void arch_ftrace_update_code(int command)
{
	command |= FTRACE_MAY_SLEEP;
	ftrace_modify_all_code(command);
}

int __init ftrace_dyn_arch_init(void)
{
	return 0;
}
#endif /* CONFIG_DYNAMIC_FTRACE */

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/*
 * function_graph tracer expects ftrace_return_to_handler() to be called
 * on the way back to parent. For this purpose, this function is called
 * in _mcount() or ftrace_caller() to replace return address (*parent) on
 * the call stack to return_to_handler.
 *
 * Note that @frame_pointer is used only for sanity check later.
 */
void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
			   unsigned long frame_pointer)
{
	unsigned long return_hooker = (unsigned long)&return_to_handler;
	unsigned long old;

	if (unlikely(atomic_read(&current->tracing_graph_pause)))
		return;

	/*
	 * Note:
	 * No protection against faulting at *parent, which may be seen
	 * on other archs. It's unlikely on AArch64.
	 */
	old = *parent;

	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
		*parent = return_hooker;
}

#ifdef CONFIG_DYNAMIC_FTRACE
/*
 * Turn on/off the call to ftrace_graph_caller() in ftrace_caller()
 * depending on @enable.
 */
static int ftrace_modify_graph_caller(bool enable)
{
	unsigned long pc = (unsigned long)&ftrace_graph_call;
	u32 branch, nop;

	branch = aarch64_insn_gen_branch_imm(pc,
					     (unsigned long)ftrace_graph_caller,
					     AARCH64_INSN_BRANCH_NOLINK);
	nop = aarch64_insn_gen_nop();

	if (enable)
		return ftrace_modify_code(pc, nop, branch, true);
	else
		return ftrace_modify_code(pc, branch, nop, true);
}

int ftrace_enable_ftrace_graph_caller(void)
{
	return ftrace_modify_graph_caller(true);
}

int ftrace_disable_ftrace_graph_caller(void)
{
	return ftrace_modify_graph_caller(false);
}
#endif /* CONFIG_DYNAMIC_FTRACE */
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */