// SPDX-License-Identifier: GPL-2.0-or-later /* * nct6775 - Driver for the hardware monitoring functionality of * Nuvoton NCT677x Super-I/O chips * * Copyright (C) 2012 Guenter Roeck * * Derived from w83627ehf driver * Copyright (C) 2005-2012 Jean Delvare * Copyright (C) 2006 Yuan Mu (Winbond), * Rudolf Marek * David Hubbard * Daniel J Blueman * Copyright (C) 2010 Sheng-Yuan Huang (Nuvoton) (PS00) * * Shamelessly ripped from the w83627hf driver * Copyright (C) 2003 Mark Studebaker * * Supports the following chips: * * Chip #vin #fan #pwm #temp chip IDs man ID * nct6106d 9 3 3 6+3 0xc450 0xc1 0x5ca3 * nct6116d 9 5 5 3+3 0xd280 0xc1 0x5ca3 * nct6775f 9 4 3 6+3 0xb470 0xc1 0x5ca3 * nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3 * nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3 * nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3 * nct6792d 15 6 6 2+6 0xc910 0xc1 0x5ca3 * nct6793d 15 6 6 2+6 0xd120 0xc1 0x5ca3 * nct6795d 14 6 6 2+6 0xd350 0xc1 0x5ca3 * nct6796d 14 7 7 2+6 0xd420 0xc1 0x5ca3 * nct6797d 14 7 7 2+6 0xd450 0xc1 0x5ca3 * (0xd451) * nct6798d 14 7 7 2+6 0xd428 0xc1 0x5ca3 * (0xd429) * * #temp lists the number of monitored temperature sources (first value) plus * the number of directly connectable temperature sensors (second value). */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "lm75.h" #define USE_ALTERNATE enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793, nct6795, nct6796, nct6797, nct6798 }; /* used to set data->name = nct6775_device_names[data->sio_kind] */ static const char * const nct6775_device_names[] = { "nct6106", "nct6116", "nct6775", "nct6776", "nct6779", "nct6791", "nct6792", "nct6793", "nct6795", "nct6796", "nct6797", "nct6798", }; static const char * const nct6775_sio_names[] __initconst = { "NCT6106D", "NCT6116D", "NCT6775F", "NCT6776D/F", "NCT6779D", "NCT6791D", "NCT6792D", "NCT6793D", "NCT6795D", "NCT6796D", "NCT6797D", "NCT6798D", }; static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); static unsigned short fan_debounce; module_param(fan_debounce, ushort, 0); MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); #define DRVNAME "nct6775" /* * Super-I/O constants and functions */ #define NCT6775_LD_ACPI 0x0a #define NCT6775_LD_HWM 0x0b #define NCT6775_LD_VID 0x0d #define NCT6775_LD_12 0x12 #define SIO_REG_LDSEL 0x07 /* Logical device select */ #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ #define SIO_REG_ENABLE 0x30 /* Logical device enable */ #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ #define SIO_NCT6106_ID 0xc450 #define SIO_NCT6116_ID 0xd280 #define SIO_NCT6775_ID 0xb470 #define SIO_NCT6776_ID 0xc330 #define SIO_NCT6779_ID 0xc560 #define SIO_NCT6791_ID 0xc800 #define SIO_NCT6792_ID 0xc910 #define SIO_NCT6793_ID 0xd120 #define SIO_NCT6795_ID 0xd350 #define SIO_NCT6796_ID 0xd420 #define SIO_NCT6797_ID 0xd450 #define SIO_NCT6798_ID 0xd428 #define SIO_ID_MASK 0xFFF8 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; enum sensor_access { access_direct, access_asuswmi }; struct nct6775_sio_data { int sioreg; int ld; enum kinds kind; enum sensor_access access; /* superio_() callbacks */ void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val); int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg); void (*sio_select)(struct nct6775_sio_data *sio_data, int ld); int (*sio_enter)(struct nct6775_sio_data *sio_data); void (*sio_exit)(struct nct6775_sio_data *sio_data); }; #define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" #define ASUSWMI_METHODID_RSIO 0x5253494F #define ASUSWMI_METHODID_WSIO 0x5753494F #define ASUSWMI_METHODID_RHWM 0x5248574D #define ASUSWMI_METHODID_WHWM 0x5748574D #define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval) { #if IS_ENABLED(CONFIG_ACPI_WMI) u32 args = bank | (reg << 8) | (val << 16); struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_status status; union acpi_object *obj; u32 tmp = ASUSWMI_UNSUPPORTED_METHOD; status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, method_id, &input, &output); if (ACPI_FAILURE(status)) return -EIO; obj = output.pointer; if (obj && obj->type == ACPI_TYPE_INTEGER) tmp = obj->integer.value; if (retval) *retval = tmp; kfree(obj); if (tmp == ASUSWMI_UNSUPPORTED_METHOD) return -ENODEV; return 0; #else return -EOPNOTSUPP; #endif } static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val) { return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank, reg, val, NULL); } static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val) { u32 ret, tmp = 0; ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank, reg, 0, &tmp); *val = tmp; return ret; } static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg) { int tmp = 0; nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld, reg, 0, &tmp); return tmp; } static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val) { nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld, reg, val, NULL); } static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld) { sio_data->ld = ld; } static int superio_wmi_enter(struct nct6775_sio_data *sio_data) { return 0; } static void superio_wmi_exit(struct nct6775_sio_data *sio_data) { } static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val) { int ioreg = sio_data->sioreg; outb(reg, ioreg); outb(val, ioreg + 1); } static int superio_inb(struct nct6775_sio_data *sio_data, int reg) { int ioreg = sio_data->sioreg; outb(reg, ioreg); return inb(ioreg + 1); } static void superio_select(struct nct6775_sio_data *sio_data, int ld) { int ioreg = sio_data->sioreg; outb(SIO_REG_LDSEL, ioreg); outb(ld, ioreg + 1); } static int superio_enter(struct nct6775_sio_data *sio_data) { int ioreg = sio_data->sioreg; /* * Try to reserve and for exclusive access. */ if (!request_muxed_region(ioreg, 2, DRVNAME)) return -EBUSY; outb(0x87, ioreg); outb(0x87, ioreg); return 0; } static void superio_exit(struct nct6775_sio_data *sio_data) { int ioreg = sio_data->sioreg; outb(0xaa, ioreg); outb(0x02, ioreg); outb(0x02, ioreg + 1); release_region(ioreg, 2); } /* * ISA constants */ #define IOREGION_ALIGNMENT (~7) #define IOREGION_OFFSET 5 #define IOREGION_LENGTH 2 #define ADDR_REG_OFFSET 0 #define DATA_REG_OFFSET 1 #define NCT6775_REG_BANK 0x4E #define NCT6775_REG_CONFIG 0x40 #define NCT6775_PORT_CHIPID 0x58 /* * Not currently used: * REG_MAN_ID has the value 0x5ca3 for all supported chips. * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model. * REG_MAN_ID is at port 0x4f * REG_CHIP_ID is at port 0x58 */ #define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/ #define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */ #define NUM_REG_ALARM 7 /* Max number of alarm registers */ #define NUM_REG_BEEP 5 /* Max number of beep registers */ #define NUM_FAN 7 /* Common and NCT6775 specific data */ /* Voltage min/max registers for nr=7..14 are in bank 5 */ static const u16 NCT6775_REG_IN_MAX[] = { 0x2b, 0x2d, 0x2f, 0x31, 0x33, 0x35, 0x37, 0x554, 0x556, 0x558, 0x55a, 0x55c, 0x55e, 0x560, 0x562 }; static const u16 NCT6775_REG_IN_MIN[] = { 0x2c, 0x2e, 0x30, 0x32, 0x34, 0x36, 0x38, 0x555, 0x557, 0x559, 0x55b, 0x55d, 0x55f, 0x561, 0x563 }; static const u16 NCT6775_REG_IN[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x550, 0x551, 0x552 }; #define NCT6775_REG_VBAT 0x5D #define NCT6775_REG_DIODE 0x5E #define NCT6775_DIODE_MASK 0x02 #define NCT6775_REG_FANDIV1 0x506 #define NCT6775_REG_FANDIV2 0x507 #define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0 static const u16 NCT6775_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B }; /* 0..15 voltages, 16..23 fans, 24..29 temperatures, 30..31 intrusion */ static const s8 NCT6775_ALARM_BITS[] = { 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ 17, -1, -1, -1, -1, -1, -1, /* in8..in14 */ -1, /* unused */ 6, 7, 11, -1, -1, /* fan1..fan5 */ -1, -1, -1, /* unused */ 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ 12, -1 }; /* intrusion0, intrusion1 */ #define FAN_ALARM_BASE 16 #define TEMP_ALARM_BASE 24 #define INTRUSION_ALARM_BASE 30 static const u16 NCT6775_REG_BEEP[NUM_REG_BEEP] = { 0x56, 0x57, 0x453, 0x4e }; /* * 0..14 voltages, 15 global beep enable, 16..23 fans, 24..29 temperatures, * 30..31 intrusion */ static const s8 NCT6775_BEEP_BITS[] = { 0, 1, 2, 3, 8, 9, 10, 16, /* in0.. in7 */ 17, -1, -1, -1, -1, -1, -1, /* in8..in14 */ 21, /* global beep enable */ 6, 7, 11, 28, -1, /* fan1..fan5 */ -1, -1, -1, /* unused */ 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ 12, -1 }; /* intrusion0, intrusion1 */ #define BEEP_ENABLE_BASE 15 static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee }; static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 }; /* DC or PWM output fan configuration */ static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 }; static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 }; /* Advanced Fan control, some values are common for all fans */ static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301, 0x801, 0x901, 0xa01, 0xb01 }; static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302, 0x802, 0x902, 0xa02, 0xb02 }; static const u16 NCT6775_REG_FAN_STEP_DOWN_TIME[] = { 0x103, 0x203, 0x303, 0x803, 0x903, 0xa03, 0xb03 }; static const u16 NCT6775_REG_FAN_STEP_UP_TIME[] = { 0x104, 0x204, 0x304, 0x804, 0x904, 0xa04, 0xb04 }; static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { 0x105, 0x205, 0x305, 0x805, 0x905, 0xa05, 0xb05 }; static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { 0x106, 0x206, 0x306, 0x806, 0x906, 0xa06, 0xb06 }; static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a }; static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b }; static const u16 NCT6775_REG_FAN_STOP_TIME[] = { 0x107, 0x207, 0x307, 0x807, 0x907, 0xa07, 0xb07 }; static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309, 0x809, 0x909, 0xa09, 0xb09 }; static const u16 NCT6775_REG_PWM_READ[] = { 0x01, 0x03, 0x11, 0x13, 0x15, 0xa09, 0xb09 }; static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 }; static const u16 NCT6775_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d }; static const u16 NCT6775_REG_FAN_PULSES[NUM_FAN] = { 0x641, 0x642, 0x643, 0x644 }; static const u16 NCT6775_FAN_PULSE_SHIFT[NUM_FAN] = { }; static const u16 NCT6775_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x62b, 0x62c, 0x62d }; static const u16 NCT6775_REG_TEMP_MON[] = { 0x73, 0x75, 0x77 }; static const u16 NCT6775_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6775_REG_TEMP)] = { 0, 0x152, 0x252, 0x628, 0x629, 0x62A }; static const u16 NCT6775_REG_TEMP_HYST[ARRAY_SIZE(NCT6775_REG_TEMP)] = { 0x3a, 0x153, 0x253, 0x673, 0x678, 0x67D }; static const u16 NCT6775_REG_TEMP_OVER[ARRAY_SIZE(NCT6775_REG_TEMP)] = { 0x39, 0x155, 0x255, 0x672, 0x677, 0x67C }; static const u16 NCT6775_REG_TEMP_SOURCE[ARRAY_SIZE(NCT6775_REG_TEMP)] = { 0x621, 0x622, 0x623, 0x624, 0x625, 0x626 }; static const u16 NCT6775_REG_TEMP_SEL[] = { 0x100, 0x200, 0x300, 0x800, 0x900, 0xa00, 0xb00 }; static const u16 NCT6775_REG_WEIGHT_TEMP_SEL[] = { 0x139, 0x239, 0x339, 0x839, 0x939, 0xa39 }; static const u16 NCT6775_REG_WEIGHT_TEMP_STEP[] = { 0x13a, 0x23a, 0x33a, 0x83a, 0x93a, 0xa3a }; static const u16 NCT6775_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x13b, 0x23b, 0x33b, 0x83b, 0x93b, 0xa3b }; static const u16 NCT6775_REG_WEIGHT_DUTY_STEP[] = { 0x13c, 0x23c, 0x33c, 0x83c, 0x93c, 0xa3c }; static const u16 NCT6775_REG_WEIGHT_TEMP_BASE[] = { 0x13d, 0x23d, 0x33d, 0x83d, 0x93d, 0xa3d }; static const u16 NCT6775_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 }; static const u16 NCT6775_REG_AUTO_TEMP[] = { 0x121, 0x221, 0x321, 0x821, 0x921, 0xa21, 0xb21 }; static const u16 NCT6775_REG_AUTO_PWM[] = { 0x127, 0x227, 0x327, 0x827, 0x927, 0xa27, 0xb27 }; #define NCT6775_AUTO_TEMP(data, nr, p) ((data)->REG_AUTO_TEMP[nr] + (p)) #define NCT6775_AUTO_PWM(data, nr, p) ((data)->REG_AUTO_PWM[nr] + (p)) static const u16 NCT6775_REG_CRITICAL_ENAB[] = { 0x134, 0x234, 0x334 }; static const u16 NCT6775_REG_CRITICAL_TEMP[] = { 0x135, 0x235, 0x335, 0x835, 0x935, 0xa35, 0xb35 }; static const u16 NCT6775_REG_CRITICAL_TEMP_TOLERANCE[] = { 0x138, 0x238, 0x338, 0x838, 0x938, 0xa38, 0xb38 }; static const char *const nct6775_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN", "AMD SB-TSI", "PECI Agent 0", "PECI Agent 1", "PECI Agent 2", "PECI Agent 3", "PECI Agent 4", "PECI Agent 5", "PECI Agent 6", "PECI Agent 7", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "PCH_DIM0_TEMP", "PCH_DIM1_TEMP", "PCH_DIM2_TEMP", "PCH_DIM3_TEMP" }; #define NCT6775_TEMP_MASK 0x001ffffe #define NCT6775_VIRT_TEMP_MASK 0x00000000 static const u16 NCT6775_REG_TEMP_ALTERNATE[32] = { [13] = 0x661, [14] = 0x662, [15] = 0x664, }; static const u16 NCT6775_REG_TEMP_CRIT[32] = { [4] = 0xa00, [5] = 0xa01, [6] = 0xa02, [7] = 0xa03, [8] = 0xa04, [9] = 0xa05, [10] = 0xa06, [11] = 0xa07 }; /* NCT6776 specific data */ /* STEP_UP_TIME and STEP_DOWN_TIME regs are swapped for all chips but NCT6775 */ #define NCT6776_REG_FAN_STEP_UP_TIME NCT6775_REG_FAN_STEP_DOWN_TIME #define NCT6776_REG_FAN_STEP_DOWN_TIME NCT6775_REG_FAN_STEP_UP_TIME static const s8 NCT6776_ALARM_BITS[] = { 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ 17, -1, -1, -1, -1, -1, -1, /* in8..in14 */ -1, /* unused */ 6, 7, 11, 10, 23, /* fan1..fan5 */ -1, -1, -1, /* unused */ 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ 12, 9 }; /* intrusion0, intrusion1 */ static const u16 NCT6776_REG_BEEP[NUM_REG_BEEP] = { 0xb2, 0xb3, 0xb4, 0xb5 }; static const s8 NCT6776_BEEP_BITS[] = { 0, 1, 2, 3, 4, 5, 6, 7, /* in0.. in7 */ 8, -1, -1, -1, -1, -1, -1, /* in8..in14 */ 24, /* global beep enable */ 25, 26, 27, 28, 29, /* fan1..fan5 */ -1, -1, -1, /* unused */ 16, 17, 18, 19, 20, 21, /* temp1..temp6 */ 30, 31 }; /* intrusion0, intrusion1 */ static const u16 NCT6776_REG_TOLERANCE_H[] = { 0x10c, 0x20c, 0x30c, 0x80c, 0x90c, 0xa0c, 0xb0c }; static const u8 NCT6776_REG_PWM_MODE[] = { 0x04, 0, 0, 0, 0, 0 }; static const u8 NCT6776_PWM_MODE_MASK[] = { 0x01, 0, 0, 0, 0, 0 }; static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642, 0x64a, 0x64c }; static const u16 NCT6776_REG_FAN_PULSES[NUM_FAN] = { 0x644, 0x645, 0x646, 0x647, 0x648, 0x649 }; static const u16 NCT6776_REG_WEIGHT_DUTY_BASE[] = { 0x13e, 0x23e, 0x33e, 0x83e, 0x93e, 0xa3e }; static const u16 NCT6776_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6775_REG_TEMP)] = { 0x18, 0x152, 0x252, 0x628, 0x629, 0x62A }; static const char *const nct6776_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN", "SMBUSMASTER 0", "SMBUSMASTER 1", "SMBUSMASTER 2", "SMBUSMASTER 3", "SMBUSMASTER 4", "SMBUSMASTER 5", "SMBUSMASTER 6", "SMBUSMASTER 7", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "PCH_DIM0_TEMP", "PCH_DIM1_TEMP", "PCH_DIM2_TEMP", "PCH_DIM3_TEMP", "BYTE_TEMP" }; #define NCT6776_TEMP_MASK 0x007ffffe #define NCT6776_VIRT_TEMP_MASK 0x00000000 static const u16 NCT6776_REG_TEMP_ALTERNATE[32] = { [14] = 0x401, [15] = 0x402, [16] = 0x404, }; static const u16 NCT6776_REG_TEMP_CRIT[32] = { [11] = 0x709, [12] = 0x70a, }; /* NCT6779 specific data */ static const u16 NCT6779_REG_IN[] = { 0x480, 0x481, 0x482, 0x483, 0x484, 0x485, 0x486, 0x487, 0x488, 0x489, 0x48a, 0x48b, 0x48c, 0x48d, 0x48e }; static const u16 NCT6779_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B, 0x568 }; static const s8 NCT6779_ALARM_BITS[] = { 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ 17, 24, 25, 26, 27, 28, 29, /* in8..in14 */ -1, /* unused */ 6, 7, 11, 10, 23, /* fan1..fan5 */ -1, -1, -1, /* unused */ 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ 12, 9 }; /* intrusion0, intrusion1 */ static const s8 NCT6779_BEEP_BITS[] = { 0, 1, 2, 3, 4, 5, 6, 7, /* in0.. in7 */ 8, 9, 10, 11, 12, 13, 14, /* in8..in14 */ 24, /* global beep enable */ 25, 26, 27, 28, 29, /* fan1..fan5 */ -1, -1, -1, /* unused */ 16, 17, -1, -1, -1, -1, /* temp1..temp6 */ 30, 31 }; /* intrusion0, intrusion1 */ static const u16 NCT6779_REG_FAN[] = { 0x4c0, 0x4c2, 0x4c4, 0x4c6, 0x4c8, 0x4ca, 0x4ce }; static const u16 NCT6779_REG_FAN_PULSES[NUM_FAN] = { 0x644, 0x645, 0x646, 0x647, 0x648, 0x649, 0x64f }; static const u16 NCT6779_REG_CRITICAL_PWM_ENABLE[] = { 0x136, 0x236, 0x336, 0x836, 0x936, 0xa36, 0xb36 }; #define NCT6779_CRITICAL_PWM_ENABLE_MASK 0x01 static const u16 NCT6779_REG_CRITICAL_PWM[] = { 0x137, 0x237, 0x337, 0x837, 0x937, 0xa37, 0xb37 }; static const u16 NCT6779_REG_TEMP[] = { 0x27, 0x150 }; static const u16 NCT6779_REG_TEMP_MON[] = { 0x73, 0x75, 0x77, 0x79, 0x7b }; static const u16 NCT6779_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6779_REG_TEMP)] = { 0x18, 0x152 }; static const u16 NCT6779_REG_TEMP_HYST[ARRAY_SIZE(NCT6779_REG_TEMP)] = { 0x3a, 0x153 }; static const u16 NCT6779_REG_TEMP_OVER[ARRAY_SIZE(NCT6779_REG_TEMP)] = { 0x39, 0x155 }; static const u16 NCT6779_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456, 0x44a, 0x44b, 0x44c }; static const char *const nct6779_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN0", "AUXTIN1", "AUXTIN2", "AUXTIN3", "", "SMBUSMASTER 0", "SMBUSMASTER 1", "SMBUSMASTER 2", "SMBUSMASTER 3", "SMBUSMASTER 4", "SMBUSMASTER 5", "SMBUSMASTER 6", "SMBUSMASTER 7", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "PCH_DIM0_TEMP", "PCH_DIM1_TEMP", "PCH_DIM2_TEMP", "PCH_DIM3_TEMP", "BYTE_TEMP", "", "", "", "", "Virtual_TEMP" }; #define NCT6779_TEMP_MASK 0x07ffff7e #define NCT6779_VIRT_TEMP_MASK 0x00000000 #define NCT6791_TEMP_MASK 0x87ffff7e #define NCT6791_VIRT_TEMP_MASK 0x80000000 static const u16 NCT6779_REG_TEMP_ALTERNATE[32] = { 0x490, 0x491, 0x492, 0x493, 0x494, 0x495, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x400, 0x401, 0x402, 0x404, 0x405, 0x406, 0x407, 0x408, 0 }; static const u16 NCT6779_REG_TEMP_CRIT[32] = { [15] = 0x709, [16] = 0x70a, }; /* NCT6791 specific data */ #define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 static const u16 NCT6791_REG_WEIGHT_TEMP_SEL[NUM_FAN] = { 0, 0x239 }; static const u16 NCT6791_REG_WEIGHT_TEMP_STEP[NUM_FAN] = { 0, 0x23a }; static const u16 NCT6791_REG_WEIGHT_TEMP_STEP_TOL[NUM_FAN] = { 0, 0x23b }; static const u16 NCT6791_REG_WEIGHT_DUTY_STEP[NUM_FAN] = { 0, 0x23c }; static const u16 NCT6791_REG_WEIGHT_TEMP_BASE[NUM_FAN] = { 0, 0x23d }; static const u16 NCT6791_REG_WEIGHT_DUTY_BASE[NUM_FAN] = { 0, 0x23e }; static const u16 NCT6791_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B, 0x568, 0x45D }; static const s8 NCT6791_ALARM_BITS[] = { 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ 17, 24, 25, 26, 27, 28, 29, /* in8..in14 */ -1, /* unused */ 6, 7, 11, 10, 23, 33, /* fan1..fan6 */ -1, -1, /* unused */ 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ 12, 9 }; /* intrusion0, intrusion1 */ /* NCT6792/NCT6793 specific data */ static const u16 NCT6792_REG_TEMP_MON[] = { 0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d }; static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = { 0xb2, 0xb3, 0xb4, 0xb5, 0xbf }; static const char *const nct6792_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN0", "AUXTIN1", "AUXTIN2", "AUXTIN3", "", "SMBUSMASTER 0", "SMBUSMASTER 1", "SMBUSMASTER 2", "SMBUSMASTER 3", "SMBUSMASTER 4", "SMBUSMASTER 5", "SMBUSMASTER 6", "SMBUSMASTER 7", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "PCH_DIM0_TEMP", "PCH_DIM1_TEMP", "PCH_DIM2_TEMP", "PCH_DIM3_TEMP", "BYTE_TEMP", "PECI Agent 0 Calibration", "PECI Agent 1 Calibration", "", "", "Virtual_TEMP" }; #define NCT6792_TEMP_MASK 0x9fffff7e #define NCT6792_VIRT_TEMP_MASK 0x80000000 static const char *const nct6793_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN0", "AUXTIN1", "AUXTIN2", "AUXTIN3", "", "SMBUSMASTER 0", "SMBUSMASTER 1", "", "", "", "", "", "", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "Agent0 Dimm0 ", "Agent0 Dimm1", "Agent1 Dimm0", "Agent1 Dimm1", "BYTE_TEMP0", "BYTE_TEMP1", "PECI Agent 0 Calibration", "PECI Agent 1 Calibration", "", "Virtual_TEMP" }; #define NCT6793_TEMP_MASK 0xbfff037e #define NCT6793_VIRT_TEMP_MASK 0x80000000 static const char *const nct6795_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN0", "AUXTIN1", "AUXTIN2", "AUXTIN3", "", "SMBUSMASTER 0", "SMBUSMASTER 1", "SMBUSMASTER 2", "SMBUSMASTER 3", "SMBUSMASTER 4", "SMBUSMASTER 5", "SMBUSMASTER 6", "SMBUSMASTER 7", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "Agent0 Dimm0", "Agent0 Dimm1", "Agent1 Dimm0", "Agent1 Dimm1", "BYTE_TEMP0", "BYTE_TEMP1", "PECI Agent 0 Calibration", "PECI Agent 1 Calibration", "", "Virtual_TEMP" }; #define NCT6795_TEMP_MASK 0xbfffff7e #define NCT6795_VIRT_TEMP_MASK 0x80000000 static const char *const nct6796_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN0", "AUXTIN1", "AUXTIN2", "AUXTIN3", "AUXTIN4", "SMBUSMASTER 0", "SMBUSMASTER 1", "Virtual_TEMP", "Virtual_TEMP", "", "", "", "", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "Agent0 Dimm0", "Agent0 Dimm1", "Agent1 Dimm0", "Agent1 Dimm1", "BYTE_TEMP0", "BYTE_TEMP1", "PECI Agent 0 Calibration", "PECI Agent 1 Calibration", "", "Virtual_TEMP" }; #define NCT6796_TEMP_MASK 0xbfff0ffe #define NCT6796_VIRT_TEMP_MASK 0x80000c00 static const char *const nct6798_temp_label[] = { "", "SYSTIN", "CPUTIN", "AUXTIN0", "AUXTIN1", "AUXTIN2", "AUXTIN3", "AUXTIN4", "SMBUSMASTER 0", "SMBUSMASTER 1", "Virtual_TEMP", "Virtual_TEMP", "", "", "", "", "PECI Agent 0", "PECI Agent 1", "PCH_CHIP_CPU_MAX_TEMP", "PCH_CHIP_TEMP", "PCH_CPU_TEMP", "PCH_MCH_TEMP", "Agent0 Dimm0", "Agent0 Dimm1", "Agent1 Dimm0", "Agent1 Dimm1", "BYTE_TEMP0", "BYTE_TEMP1", "PECI Agent 0 Calibration", /* undocumented */ "PECI Agent 1 Calibration", /* undocumented */ "", "Virtual_TEMP" }; #define NCT6798_TEMP_MASK 0xbfff0ffe #define NCT6798_VIRT_TEMP_MASK 0x80000c00 /* NCT6102D/NCT6106D specific data */ #define NCT6106_REG_VBAT 0x318 #define NCT6106_REG_DIODE 0x319 #define NCT6106_DIODE_MASK 0x01 static const u16 NCT6106_REG_IN_MAX[] = { 0x90, 0x92, 0x94, 0x96, 0x98, 0x9a, 0x9e, 0xa0, 0xa2 }; static const u16 NCT6106_REG_IN_MIN[] = { 0x91, 0x93, 0x95, 0x97, 0x99, 0x9b, 0x9f, 0xa1, 0xa3 }; static const u16 NCT6106_REG_IN[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x07, 0x08, 0x09 }; static const u16 NCT6106_REG_TEMP[] = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15 }; static const u16 NCT6106_REG_TEMP_MON[] = { 0x18, 0x19, 0x1a }; static const u16 NCT6106_REG_TEMP_HYST[] = { 0xc3, 0xc7, 0xcb, 0xcf, 0xd3, 0xd7 }; static const u16 NCT6106_REG_TEMP_OVER[] = { 0xc2, 0xc6, 0xca, 0xce, 0xd2, 0xd6 }; static const u16 NCT6106_REG_TEMP_CRIT_L[] = { 0xc0, 0xc4, 0xc8, 0xcc, 0xd0, 0xd4 }; static const u16 NCT6106_REG_TEMP_CRIT_H[] = { 0xc1, 0xc5, 0xc9, 0xcf, 0xd1, 0xd5 }; static const u16 NCT6106_REG_TEMP_OFFSET[] = { 0x311, 0x312, 0x313 }; static const u16 NCT6106_REG_TEMP_CONFIG[] = { 0xb7, 0xb8, 0xb9, 0xba, 0xbb, 0xbc }; static const u16 NCT6106_REG_FAN[] = { 0x20, 0x22, 0x24 }; static const u16 NCT6106_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4 }; static const u16 NCT6106_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6 }; static const u16 NCT6106_FAN_PULSE_SHIFT[] = { 0, 2, 4 }; static const u8 NCT6106_REG_PWM_MODE[] = { 0xf3, 0xf3, 0xf3 }; static const u8 NCT6106_PWM_MODE_MASK[] = { 0x01, 0x02, 0x04 }; static const u16 NCT6106_REG_PWM_READ[] = { 0x4a, 0x4b, 0x4c }; static const u16 NCT6106_REG_FAN_MODE[] = { 0x113, 0x123, 0x133 }; static const u16 NCT6106_REG_TEMP_SOURCE[] = { 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5 }; static const u16 NCT6106_REG_CRITICAL_TEMP[] = { 0x11a, 0x12a, 0x13a }; static const u16 NCT6106_REG_CRITICAL_TEMP_TOLERANCE[] = { 0x11b, 0x12b, 0x13b }; static const u16 NCT6106_REG_CRITICAL_PWM_ENABLE[] = { 0x11c, 0x12c, 0x13c }; #define NCT6106_CRITICAL_PWM_ENABLE_MASK 0x10 static const u16 NCT6106_REG_CRITICAL_PWM[] = { 0x11d, 0x12d, 0x13d }; static const u16 NCT6106_REG_FAN_STEP_UP_TIME[] = { 0x114, 0x124, 0x134 }; static const u16 NCT6106_REG_FAN_STEP_DOWN_TIME[] = { 0x115, 0x125, 0x135 }; static const u16 NCT6106_REG_FAN_STOP_OUTPUT[] = { 0x116, 0x126, 0x136 }; static const u16 NCT6106_REG_FAN_START_OUTPUT[] = { 0x117, 0x127, 0x137 }; static const u16 NCT6106_REG_FAN_STOP_TIME[] = { 0x118, 0x128, 0x138 }; static const u16 NCT6106_REG_TOLERANCE_H[] = { 0x112, 0x122, 0x132 }; static const u16 NCT6106_REG_TARGET[] = { 0x111, 0x121, 0x131 }; static const u16 NCT6106_REG_WEIGHT_TEMP_SEL[] = { 0x168, 0x178, 0x188 }; static const u16 NCT6106_REG_WEIGHT_TEMP_STEP[] = { 0x169, 0x179, 0x189 }; static const u16 NCT6106_REG_WEIGHT_TEMP_STEP_TOL[] = { 0x16a, 0x17a, 0x18a }; static const u16 NCT6106_REG_WEIGHT_DUTY_STEP[] = { 0x16b, 0x17b, 0x18b }; static const u16 NCT6106_REG_WEIGHT_TEMP_BASE[] = { 0x16c, 0x17c, 0x18c }; static const u16 NCT6106_REG_WEIGHT_DUTY_BASE[] = { 0x16d, 0x17d, 0x18d }; static const u16 NCT6106_REG_AUTO_TEMP[] = { 0x160, 0x170, 0x180 }; static const u16 NCT6106_REG_AUTO_PWM[] = { 0x164, 0x174, 0x184 }; static const u16 NCT6106_REG_ALARM[NUM_REG_ALARM] = { 0x77, 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d }; static const s8 NCT6106_ALARM_BITS[] = { 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ 9, -1, -1, -1, -1, -1, -1, /* in8..in14 */ -1, /* unused */ 32, 33, 34, -1, -1, /* fan1..fan5 */ -1, -1, -1, /* unused */ 16, 17, 18, 19, 20, 21, /* temp1..temp6 */ 48, -1 /* intrusion0, intrusion1 */ }; static const u16 NCT6106_REG_BEEP[NUM_REG_BEEP] = { 0x3c0, 0x3c1, 0x3c2, 0x3c3, 0x3c4 }; static const s8 NCT6106_BEEP_BITS[] = { 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ 9, 10, 11, 12, -1, -1, -1, /* in8..in14 */ 32, /* global beep enable */ 24, 25, 26, 27, 28, /* fan1..fan5 */ -1, -1, -1, /* unused */ 16, 17, 18, 19, 20, 21, /* temp1..temp6 */ 34, -1 /* intrusion0, intrusion1 */ }; static const u16 NCT6106_REG_TEMP_ALTERNATE[32] = { [14] = 0x51, [15] = 0x52, [16] = 0x54, }; static const u16 NCT6106_REG_TEMP_CRIT[32] = { [11] = 0x204, [12] = 0x205, }; /* NCT6112D/NCT6114D/NCT6116D specific data */ static const u16 NCT6116_REG_FAN[] = { 0x20, 0x22, 0x24, 0x26, 0x28 }; static const u16 NCT6116_REG_FAN_MIN[] = { 0xe0, 0xe2, 0xe4, 0xe6, 0xe8 }; static const u16 NCT6116_REG_FAN_PULSES[] = { 0xf6, 0xf6, 0xf6, 0xf6, 0xf5 }; static const u16 NCT6116_FAN_PULSE_SHIFT[] = { 0, 2, 4, 6, 6 }; static const u16 NCT6116_REG_PWM[] = { 0x119, 0x129, 0x139, 0x199, 0x1a9 }; static const u16 NCT6116_REG_FAN_MODE[] = { 0x113, 0x123, 0x133, 0x193, 0x1a3 }; static const u16 NCT6116_REG_TEMP_SEL[] = { 0x110, 0x120, 0x130, 0x190, 0x1a0 }; static const u16 NCT6116_REG_TEMP_SOURCE[] = { 0xb0, 0xb1, 0xb2 }; static const u16 NCT6116_REG_CRITICAL_TEMP[] = { 0x11a, 0x12a, 0x13a, 0x19a, 0x1aa }; static const u16 NCT6116_REG_CRITICAL_TEMP_TOLERANCE[] = { 0x11b, 0x12b, 0x13b, 0x19b, 0x1ab }; static const u16 NCT6116_REG_CRITICAL_PWM_ENABLE[] = { 0x11c, 0x12c, 0x13c, 0x19c, 0x1ac }; static const u16 NCT6116_REG_CRITICAL_PWM[] = { 0x11d, 0x12d, 0x13d, 0x19d, 0x1ad }; static const u16 NCT6116_REG_FAN_STEP_UP_TIME[] = { 0x114, 0x124, 0x134, 0x194, 0x1a4 }; static const u16 NCT6116_REG_FAN_STEP_DOWN_TIME[] = { 0x115, 0x125, 0x135, 0x195, 0x1a5 }; static const u16 NCT6116_REG_FAN_STOP_OUTPUT[] = { 0x116, 0x126, 0x136, 0x196, 0x1a6 }; static const u16 NCT6116_REG_FAN_START_OUTPUT[] = { 0x117, 0x127, 0x137, 0x197, 0x1a7 }; static const u16 NCT6116_REG_FAN_STOP_TIME[] = { 0x118, 0x128, 0x138, 0x198, 0x1a8 }; static const u16 NCT6116_REG_TOLERANCE_H[] = { 0x112, 0x122, 0x132, 0x192, 0x1a2 }; static const u16 NCT6116_REG_TARGET[] = { 0x111, 0x121, 0x131, 0x191, 0x1a1 }; static const u16 NCT6116_REG_AUTO_TEMP[] = { 0x160, 0x170, 0x180, 0x1d0, 0x1e0 }; static const u16 NCT6116_REG_AUTO_PWM[] = { 0x164, 0x174, 0x184, 0x1d4, 0x1e4 }; static const s8 NCT6116_ALARM_BITS[] = { 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ 9, -1, -1, -1, -1, -1, -1, /* in8..in9 */ -1, /* unused */ 32, 33, 34, 35, 36, /* fan1..fan5 */ -1, -1, -1, /* unused */ 16, 17, 18, -1, -1, -1, /* temp1..temp6 */ 48, -1 /* intrusion0, intrusion1 */ }; static const s8 NCT6116_BEEP_BITS[] = { 0, 1, 2, 3, 4, 5, 7, 8, /* in0.. in7 */ 9, 10, 11, 12, -1, -1, -1, /* in8..in14 */ 32, /* global beep enable */ 24, 25, 26, 27, 28, /* fan1..fan5 */ -1, -1, -1, /* unused */ 16, 17, 18, -1, -1, -1, /* temp1..temp6 */ 34, -1 /* intrusion0, intrusion1 */ }; static enum pwm_enable reg_to_pwm_enable(int pwm, int mode) { if (mode == 0 && pwm == 255) return off; return mode + 1; } static int pwm_enable_to_reg(enum pwm_enable mode) { if (mode == off) return 0; return mode - 1; } /* * Conversions */ /* 1 is DC mode, output in ms */ static unsigned int step_time_from_reg(u8 reg, u8 mode) { return mode ? 400 * reg : 100 * reg; } static u8 step_time_to_reg(unsigned int msec, u8 mode) { return clamp_val((mode ? (msec + 200) / 400 : (msec + 50) / 100), 1, 255); } static unsigned int fan_from_reg8(u16 reg, unsigned int divreg) { if (reg == 0 || reg == 255) return 0; return 1350000U / (reg << divreg); } static unsigned int fan_from_reg13(u16 reg, unsigned int divreg) { if ((reg & 0xff1f) == 0xff1f) return 0; reg = (reg & 0x1f) | ((reg & 0xff00) >> 3); if (reg == 0) return 0; return 1350000U / reg; } static unsigned int fan_from_reg16(u16 reg, unsigned int divreg) { if (reg == 0 || reg == 0xffff) return 0; /* * Even though the registers are 16 bit wide, the fan divisor * still applies. */ return 1350000U / (reg << divreg); } static unsigned int fan_from_reg_rpm(u16 reg, unsigned int divreg) { return reg; } static u16 fan_to_reg(u32 fan, unsigned int divreg) { if (!fan) return 0; return (1350000U / fan) >> divreg; } static inline unsigned int div_from_reg(u8 reg) { return BIT(reg); } /* * Some of the voltage inputs have internal scaling, the tables below * contain 8 (the ADC LSB in mV) * scaling factor * 100 */ static const u16 scale_in[15] = { 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800, 800, 800, 800, 800, 800 }; static inline long in_from_reg(u8 reg, u8 nr) { return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100); } static inline u8 in_to_reg(u32 val, u8 nr) { return clamp_val(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0, 255); } /* * Data structures and manipulation thereof */ struct nct6775_data { int addr; /* IO base of hw monitor block */ int sioreg; /* SIO register address */ enum kinds kind; const char *name; const struct attribute_group *groups[6]; u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, * 3=temp_crit, 4=temp_lcrit */ u8 temp_src[NUM_TEMP]; u16 reg_temp_config[NUM_TEMP]; const char * const *temp_label; u32 temp_mask; u32 virt_temp_mask; u16 REG_CONFIG; u16 REG_VBAT; u16 REG_DIODE; u8 DIODE_MASK; const s8 *ALARM_BITS; const s8 *BEEP_BITS; const u16 *REG_VIN; const u16 *REG_IN_MINMAX[2]; const u16 *REG_TARGET; const u16 *REG_FAN; const u16 *REG_FAN_MODE; const u16 *REG_FAN_MIN; const u16 *REG_FAN_PULSES; const u16 *FAN_PULSE_SHIFT; const u16 *REG_FAN_TIME[3]; const u16 *REG_TOLERANCE_H; const u8 *REG_PWM_MODE; const u8 *PWM_MODE_MASK; const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, * [3]=pwm_max, [4]=pwm_step, * [5]=weight_duty_step, [6]=weight_duty_base */ const u16 *REG_PWM_READ; const u16 *REG_CRITICAL_PWM_ENABLE; u8 CRITICAL_PWM_ENABLE_MASK; const u16 *REG_CRITICAL_PWM; const u16 *REG_AUTO_TEMP; const u16 *REG_AUTO_PWM; const u16 *REG_CRITICAL_TEMP; const u16 *REG_CRITICAL_TEMP_TOLERANCE; const u16 *REG_TEMP_SOURCE; /* temp register sources */ const u16 *REG_TEMP_SEL; const u16 *REG_WEIGHT_TEMP_SEL; const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */ const u16 *REG_TEMP_OFFSET; const u16 *REG_ALARM; const u16 *REG_BEEP; unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg); unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg); struct mutex update_lock; bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* Register values */ u8 bank; /* current register bank */ u8 in_num; /* number of in inputs we have */ u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ unsigned int rpm[NUM_FAN]; u16 fan_min[NUM_FAN]; u8 fan_pulses[NUM_FAN]; u8 fan_div[NUM_FAN]; u8 has_pwm; u8 has_fan; /* some fan inputs can be disabled */ u8 has_fan_min; /* some fans don't have min register */ bool has_fan_div; u8 num_temp_alarms; /* 2, 3, or 6 */ u8 num_temp_beeps; /* 2, 3, or 6 */ u8 temp_fixed_num; /* 3 or 6 */ u8 temp_type[NUM_TEMP_FIXED]; s8 temp_offset[NUM_TEMP_FIXED]; s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst, * 3=temp_crit, 4=temp_lcrit */ u64 alarms; u64 beeps; u8 pwm_num; /* number of pwm */ u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage, * 1->PWM variable duty cycle */ enum pwm_enable pwm_enable[NUM_FAN]; /* 0->off * 1->manual * 2->thermal cruise mode (also called SmartFan I) * 3->fan speed cruise mode * 4->SmartFan III * 5->enhanced variable thermal cruise (SmartFan IV) */ u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, * [3]=pwm_max, [4]=pwm_step, * [5]=weight_duty_step, [6]=weight_duty_base */ u8 target_temp[NUM_FAN]; u8 target_temp_mask; u32 target_speed[NUM_FAN]; u32 target_speed_tolerance[NUM_FAN]; u8 speed_tolerance_limit; u8 temp_tolerance[2][NUM_FAN]; u8 tolerance_mask; u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */ /* Automatic fan speed control registers */ int auto_pwm_num; u8 auto_pwm[NUM_FAN][7]; u8 auto_temp[NUM_FAN][7]; u8 pwm_temp_sel[NUM_FAN]; u8 pwm_weight_temp_sel[NUM_FAN]; u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol, * 2->temp_base */ u8 vid; u8 vrm; bool have_vid; u16 have_temp; u16 have_temp_fixed; u16 have_in; /* Remember extra register values over suspend/resume */ u8 vbat; u8 fandiv1; u8 fandiv2; u8 sio_reg_enable; /* nct6775_*() callbacks */ u16 (*read_value)(struct nct6775_data *data, u16 reg); int (*write_value)(struct nct6775_data *data, u16 reg, u16 value); }; struct sensor_device_template { struct device_attribute dev_attr; union { struct { u8 nr; u8 index; } s; int index; } u; bool s2; /* true if both index and nr are used */ }; struct sensor_device_attr_u { union { struct sensor_device_attribute a1; struct sensor_device_attribute_2 a2; } u; char name[32]; }; #define __TEMPLATE_ATTR(_template, _mode, _show, _store) { \ .attr = {.name = _template, .mode = _mode }, \ .show = _show, \ .store = _store, \ } #define SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store, _index) \ { .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store), \ .u.index = _index, \ .s2 = false } #define SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store, \ _nr, _index) \ { .dev_attr = __TEMPLATE_ATTR(_template, _mode, _show, _store), \ .u.s.index = _index, \ .u.s.nr = _nr, \ .s2 = true } #define SENSOR_TEMPLATE(_name, _template, _mode, _show, _store, _index) \ static struct sensor_device_template sensor_dev_template_##_name \ = SENSOR_DEVICE_TEMPLATE(_template, _mode, _show, _store, \ _index) #define SENSOR_TEMPLATE_2(_name, _template, _mode, _show, _store, \ _nr, _index) \ static struct sensor_device_template sensor_dev_template_##_name \ = SENSOR_DEVICE_TEMPLATE_2(_template, _mode, _show, _store, \ _nr, _index) struct sensor_template_group { struct sensor_device_template **templates; umode_t (*is_visible)(struct kobject *, struct attribute *, int); int base; }; static struct attribute_group * nct6775_create_attr_group(struct device *dev, const struct sensor_template_group *tg, int repeat) { struct attribute_group *group; struct sensor_device_attr_u *su; struct sensor_device_attribute *a; struct sensor_device_attribute_2 *a2; struct attribute **attrs; struct sensor_device_template **t; int i, count; if (repeat <= 0) return ERR_PTR(-EINVAL); t = tg->templates; for (count = 0; *t; t++, count++) ; if (count == 0) return ERR_PTR(-EINVAL); group = devm_kzalloc(dev, sizeof(*group), GFP_KERNEL); if (group == NULL) return ERR_PTR(-ENOMEM); attrs = devm_kcalloc(dev, repeat * count + 1, sizeof(*attrs), GFP_KERNEL); if (attrs == NULL) return ERR_PTR(-ENOMEM); su = devm_kzalloc(dev, array3_size(repeat, count, sizeof(*su)), GFP_KERNEL); if (su == NULL) return ERR_PTR(-ENOMEM); group->attrs = attrs; group->is_visible = tg->is_visible; for (i = 0; i < repeat; i++) { t = tg->templates; while (*t != NULL) { snprintf(su->name, sizeof(su->name), (*t)->dev_attr.attr.name, tg->base + i); if ((*t)->s2) { a2 = &su->u.a2; sysfs_attr_init(&a2->dev_attr.attr); a2->dev_attr.attr.name = su->name; a2->nr = (*t)->u.s.nr + i; a2->index = (*t)->u.s.index; a2->dev_attr.attr.mode = (*t)->dev_attr.attr.mode; a2->dev_attr.show = (*t)->dev_attr.show; a2->dev_attr.store = (*t)->dev_attr.store; *attrs = &a2->dev_attr.attr; } else { a = &su->u.a1; sysfs_attr_init(&a->dev_attr.attr); a->dev_attr.attr.name = su->name; a->index = (*t)->u.index + i; a->dev_attr.attr.mode = (*t)->dev_attr.attr.mode; a->dev_attr.show = (*t)->dev_attr.show; a->dev_attr.store = (*t)->dev_attr.store; *attrs = &a->dev_attr.attr; } attrs++; su++; t++; } } return group; } static bool is_word_sized(struct nct6775_data *data, u16 reg) { switch (data->kind) { case nct6106: return reg == 0x20 || reg == 0x22 || reg == 0x24 || reg == 0xe0 || reg == 0xe2 || reg == 0xe4 || reg == 0x111 || reg == 0x121 || reg == 0x131; case nct6116: return reg == 0x20 || reg == 0x22 || reg == 0x24 || reg == 0x26 || reg == 0x28 || reg == 0xe0 || reg == 0xe2 || reg == 0xe4 || reg == 0xe6 || reg == 0xe8 || reg == 0x111 || reg == 0x121 || reg == 0x131 || reg == 0x191 || reg == 0x1a1; case nct6775: return (((reg & 0xff00) == 0x100 || (reg & 0xff00) == 0x200) && ((reg & 0x00ff) == 0x50 || (reg & 0x00ff) == 0x53 || (reg & 0x00ff) == 0x55)) || (reg & 0xfff0) == 0x630 || reg == 0x640 || reg == 0x642 || reg == 0x662 || ((reg & 0xfff0) == 0x650 && (reg & 0x000f) >= 0x06) || reg == 0x73 || reg == 0x75 || reg == 0x77; case nct6776: return (((reg & 0xff00) == 0x100 || (reg & 0xff00) == 0x200) && ((reg & 0x00ff) == 0x50 || (reg & 0x00ff) == 0x53 || (reg & 0x00ff) == 0x55)) || (reg & 0xfff0) == 0x630 || reg == 0x402 || reg == 0x640 || reg == 0x642 || ((reg & 0xfff0) == 0x650 && (reg & 0x000f) >= 0x06) || reg == 0x73 || reg == 0x75 || reg == 0x77; case nct6779: case nct6791: case nct6792: case nct6793: case nct6795: case nct6796: case nct6797: case nct6798: return reg == 0x150 || reg == 0x153 || reg == 0x155 || (reg & 0xfff0) == 0x4c0 || reg == 0x402 || reg == 0x63a || reg == 0x63c || reg == 0x63e || reg == 0x640 || reg == 0x642 || reg == 0x64a || reg == 0x64c || reg == 0x73 || reg == 0x75 || reg == 0x77 || reg == 0x79 || reg == 0x7b || reg == 0x7d; } return false; } static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg) { u8 bank = reg >> 8; data->bank = bank; } static u16 nct6775_wmi_read_value(struct nct6775_data *data, u16 reg) { int res, err, word_sized = is_word_sized(data, reg); u8 tmp = 0; nct6775_wmi_set_bank(data, reg); err = nct6775_asuswmi_read(data->bank, reg, &tmp); if (err) return 0; res = tmp; if (word_sized) { err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp); if (err) return 0; res = (res << 8) + tmp; } return res; } static int nct6775_wmi_write_value(struct nct6775_data *data, u16 reg, u16 value) { int res, word_sized = is_word_sized(data, reg); nct6775_wmi_set_bank(data, reg); if (word_sized) { res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8); if (res) return res; res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value); } else { res = nct6775_asuswmi_write(data->bank, reg & 0xff, value); } return res; } /* * On older chips, only registers 0x50-0x5f are banked. * On more recent chips, all registers are banked. * Assume that is the case and set the bank number for each access. * Cache the bank number so it only needs to be set if it changes. */ static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg) { u8 bank = reg >> 8; if (data->bank != bank) { outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET); outb_p(bank, data->addr + DATA_REG_OFFSET); data->bank = bank; } } static u16 nct6775_read_value(struct nct6775_data *data, u16 reg) { int res, word_sized = is_word_sized(data, reg); nct6775_set_bank(data, reg); outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); res = inb_p(data->addr + DATA_REG_OFFSET); if (word_sized) { outb_p((reg & 0xff) + 1, data->addr + ADDR_REG_OFFSET); res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET); } return res; } static int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value) { int word_sized = is_word_sized(data, reg); nct6775_set_bank(data, reg); outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET); if (word_sized) { outb_p(value >> 8, data->addr + DATA_REG_OFFSET); outb_p((reg & 0xff) + 1, data->addr + ADDR_REG_OFFSET); } outb_p(value & 0xff, data->addr + DATA_REG_OFFSET); return 0; } /* We left-align 8-bit temperature values to make the code simpler */ static u16 nct6775_read_temp(struct nct6775_data *data, u16 reg) { u16 res; res = data->read_value(data, reg); if (!is_word_sized(data, reg)) res <<= 8; return res; } static int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value) { if (!is_word_sized(data, reg)) value >>= 8; return data->write_value(data, reg, value); } /* This function assumes that the caller holds data->update_lock */ static void nct6775_write_fan_div(struct nct6775_data *data, int nr) { u8 reg; switch (nr) { case 0: reg = (data->read_value(data, NCT6775_REG_FANDIV1) & 0x70) | (data->fan_div[0] & 0x7); data->write_value(data, NCT6775_REG_FANDIV1, reg); break; case 1: reg = (data->read_value(data, NCT6775_REG_FANDIV1) & 0x7) | ((data->fan_div[1] << 4) & 0x70); data->write_value(data, NCT6775_REG_FANDIV1, reg); break; case 2: reg = (data->read_value(data, NCT6775_REG_FANDIV2) & 0x70) | (data->fan_div[2] & 0x7); data->write_value(data, NCT6775_REG_FANDIV2, reg); break; case 3: reg = (data->read_value(data, NCT6775_REG_FANDIV2) & 0x7) | ((data->fan_div[3] << 4) & 0x70); data->write_value(data, NCT6775_REG_FANDIV2, reg); break; } } static void nct6775_write_fan_div_common(struct nct6775_data *data, int nr) { if (data->kind == nct6775) nct6775_write_fan_div(data, nr); } static void nct6775_update_fan_div(struct nct6775_data *data) { u8 i; i = data->read_value(data, NCT6775_REG_FANDIV1); data->fan_div[0] = i & 0x7; data->fan_div[1] = (i & 0x70) >> 4; i = data->read_value(data, NCT6775_REG_FANDIV2); data->fan_div[2] = i & 0x7; if (data->has_fan & BIT(3)) data->fan_div[3] = (i & 0x70) >> 4; } static void nct6775_update_fan_div_common(struct nct6775_data *data) { if (data->kind == nct6775) nct6775_update_fan_div(data); } static void nct6775_init_fan_div(struct nct6775_data *data) { int i; nct6775_update_fan_div_common(data); /* * For all fans, start with highest divider value if the divider * register is not initialized. This ensures that we get a * reading from the fan count register, even if it is not optimal. * We'll compute a better divider later on. */ for (i = 0; i < ARRAY_SIZE(data->fan_div); i++) { if (!(data->has_fan & BIT(i))) continue; if (data->fan_div[i] == 0) { data->fan_div[i] = 7; nct6775_write_fan_div_common(data, i); } } } static void nct6775_init_fan_common(struct device *dev, struct nct6775_data *data) { int i; u8 reg; if (data->has_fan_div) nct6775_init_fan_div(data); /* * If fan_min is not set (0), set it to 0xff to disable it. This * prevents the unnecessary warning when fanX_min is reported as 0. */ for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { if (data->has_fan_min & BIT(i)) { reg = data->read_value(data, data->REG_FAN_MIN[i]); if (!reg) data->write_value(data, data->REG_FAN_MIN[i], data->has_fan_div ? 0xff : 0xff1f); } } } static void nct6775_select_fan_div(struct device *dev, struct nct6775_data *data, int nr, u16 reg) { u8 fan_div = data->fan_div[nr]; u16 fan_min; if (!data->has_fan_div) return; /* * If we failed to measure the fan speed, or the reported value is not * in the optimal range, and the clock divider can be modified, * let's try that for next time. */ if (reg == 0x00 && fan_div < 0x07) fan_div++; else if (reg != 0x00 && reg < 0x30 && fan_div > 0) fan_div--; if (fan_div != data->fan_div[nr]) { dev_dbg(dev, "Modifying fan%d clock divider from %u to %u\n", nr + 1, div_from_reg(data->fan_div[nr]), div_from_reg(fan_div)); /* Preserve min limit if possible */ if (data->has_fan_min & BIT(nr)) { fan_min = data->fan_min[nr]; if (fan_div > data->fan_div[nr]) { if (fan_min != 255 && fan_min > 1) fan_min >>= 1; } else { if (fan_min != 255) { fan_min <<= 1; if (fan_min > 254) fan_min = 254; } } if (fan_min != data->fan_min[nr]) { data->fan_min[nr] = fan_min; data->write_value(data, data->REG_FAN_MIN[nr], fan_min); } } data->fan_div[nr] = fan_div; nct6775_write_fan_div_common(data, nr); } } static void nct6775_update_pwm(struct device *dev) { struct nct6775_data *data = dev_get_drvdata(dev); int i, j; int fanmodecfg, reg; bool duty_is_dc; for (i = 0; i < data->pwm_num; i++) { if (!(data->has_pwm & BIT(i))) continue; duty_is_dc = data->REG_PWM_MODE[i] && (data->read_value(data, data->REG_PWM_MODE[i]) & data->PWM_MODE_MASK[i]); data->pwm_mode[i] = !duty_is_dc; fanmodecfg = data->read_value(data, data->REG_FAN_MODE[i]); for (j = 0; j < ARRAY_SIZE(data->REG_PWM); j++) { if (data->REG_PWM[j] && data->REG_PWM[j][i]) { data->pwm[j][i] = data->read_value(data, data->REG_PWM[j][i]); } } data->pwm_enable[i] = reg_to_pwm_enable(data->pwm[0][i], (fanmodecfg >> 4) & 7); if (!data->temp_tolerance[0][i] || data->pwm_enable[i] != speed_cruise) data->temp_tolerance[0][i] = fanmodecfg & 0x0f; if (!data->target_speed_tolerance[i] || data->pwm_enable[i] == speed_cruise) { u8 t = fanmodecfg & 0x0f; if (data->REG_TOLERANCE_H) { t |= (data->read_value(data, data->REG_TOLERANCE_H[i]) & 0x70) >> 1; } data->target_speed_tolerance[i] = t; } data->temp_tolerance[1][i] = data->read_value(data, data->REG_CRITICAL_TEMP_TOLERANCE[i]); reg = data->read_value(data, data->REG_TEMP_SEL[i]); data->pwm_temp_sel[i] = reg & 0x1f; /* If fan can stop, report floor as 0 */ if (reg & 0x80) data->pwm[2][i] = 0; if (!data->REG_WEIGHT_TEMP_SEL[i]) continue; reg = data->read_value(data, data->REG_WEIGHT_TEMP_SEL[i]); data->pwm_weight_temp_sel[i] = reg & 0x1f; /* If weight is disabled, report weight source as 0 */ if (!(reg & 0x80)) data->pwm_weight_temp_sel[i] = 0; /* Weight temp data */ for (j = 0; j < ARRAY_SIZE(data->weight_temp); j++) { data->weight_temp[j][i] = data->read_value(data, data->REG_WEIGHT_TEMP[j][i]); } } } static void nct6775_update_pwm_limits(struct device *dev) { struct nct6775_data *data = dev_get_drvdata(dev); int i, j; u8 reg; u16 reg_t; for (i = 0; i < data->pwm_num; i++) { if (!(data->has_pwm & BIT(i))) continue; for (j = 0; j < ARRAY_SIZE(data->fan_time); j++) { data->fan_time[j][i] = data->read_value(data, data->REG_FAN_TIME[j][i]); } reg_t = data->read_value(data, data->REG_TARGET[i]); /* Update only in matching mode or if never updated */ if (!data->target_temp[i] || data->pwm_enable[i] == thermal_cruise) data->target_temp[i] = reg_t & data->target_temp_mask; if (!data->target_speed[i] || data->pwm_enable[i] == speed_cruise) { if (data->REG_TOLERANCE_H) { reg_t |= (data->read_value(data, data->REG_TOLERANCE_H[i]) & 0x0f) << 8; } data->target_speed[i] = reg_t; } for (j = 0; j < data->auto_pwm_num; j++) { data->auto_pwm[i][j] = data->read_value(data, NCT6775_AUTO_PWM(data, i, j)); data->auto_temp[i][j] = data->read_value(data, NCT6775_AUTO_TEMP(data, i, j)); } /* critical auto_pwm temperature data */ data->auto_temp[i][data->auto_pwm_num] = data->read_value(data, data->REG_CRITICAL_TEMP[i]); switch (data->kind) { case nct6775: reg = data->read_value(data, NCT6775_REG_CRITICAL_ENAB[i]); data->auto_pwm[i][data->auto_pwm_num] = (reg & 0x02) ? 0xff : 0x00; break; case nct6776: data->auto_pwm[i][data->auto_pwm_num] = 0xff; break; case nct6106: case nct6116: case nct6779: case nct6791: case nct6792: case nct6793: case nct6795: case nct6796: case nct6797: case nct6798: reg = data->read_value(data, data->REG_CRITICAL_PWM_ENABLE[i]); if (reg & data->CRITICAL_PWM_ENABLE_MASK) reg = data->read_value(data, data->REG_CRITICAL_PWM[i]); else reg = 0xff; data->auto_pwm[i][data->auto_pwm_num] = reg; break; } } } static struct nct6775_data *nct6775_update_device(struct device *dev) { struct nct6775_data *data = dev_get_drvdata(dev); int i, j; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { /* Fan clock dividers */ nct6775_update_fan_div_common(data); /* Measured voltages and limits */ for (i = 0; i < data->in_num; i++) { if (!(data->have_in & BIT(i))) continue; data->in[i][0] = data->read_value(data, data->REG_VIN[i]); data->in[i][1] = data->read_value(data, data->REG_IN_MINMAX[0][i]); data->in[i][2] = data->read_value(data, data->REG_IN_MINMAX[1][i]); } /* Measured fan speeds and limits */ for (i = 0; i < ARRAY_SIZE(data->rpm); i++) { u16 reg; if (!(data->has_fan & BIT(i))) continue; reg = data->read_value(data, data->REG_FAN[i]); data->rpm[i] = data->fan_from_reg(reg, data->fan_div[i]); if (data->has_fan_min & BIT(i)) data->fan_min[i] = data->read_value(data, data->REG_FAN_MIN[i]); if (data->REG_FAN_PULSES[i]) { data->fan_pulses[i] = (data->read_value(data, data->REG_FAN_PULSES[i]) >> data->FAN_PULSE_SHIFT[i]) & 0x03; } nct6775_select_fan_div(dev, data, i, reg); } nct6775_update_pwm(dev); nct6775_update_pwm_limits(dev); /* Measured temperatures and limits */ for (i = 0; i < NUM_TEMP; i++) { if (!(data->have_temp & BIT(i))) continue; for (j = 0; j < ARRAY_SIZE(data->reg_temp); j++) { if (data->reg_temp[j][i]) data->temp[j][i] = nct6775_read_temp(data, data->reg_temp[j][i]); } if (i >= NUM_TEMP_FIXED || !(data->have_temp_fixed & BIT(i))) continue; data->temp_offset[i] = data->read_value(data, data->REG_TEMP_OFFSET[i]); } data->alarms = 0; for (i = 0; i < NUM_REG_ALARM; i++) { u8 alarm; if (!data->REG_ALARM[i]) continue; alarm = data->read_value(data, data->REG_ALARM[i]); data->alarms |= ((u64)alarm) << (i << 3); } data->beeps = 0; for (i = 0; i < NUM_REG_BEEP; i++) { u8 beep; if (!data->REG_BEEP[i]) continue; beep = data->read_value(data, data->REG_BEEP[i]); data->beeps |= ((u64)beep) << (i << 3); } data->last_updated = jiffies; data->valid = true; } mutex_unlock(&data->update_lock); return data; } /* * Sysfs callback functions */ static ssize_t show_in_reg(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int index = sattr->index; int nr = sattr->nr; return sprintf(buf, "%ld\n", in_from_reg(data->in[nr][index], nr)); } static ssize_t store_in_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int index = sattr->index; int nr = sattr->nr; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; mutex_lock(&data->update_lock); data->in[nr][index] = in_to_reg(val, nr); data->write_value(data, data->REG_IN_MINMAX[index - 1][nr], data->in[nr][index]); mutex_unlock(&data->update_lock); return count; } static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = data->ALARM_BITS[sattr->index]; return sprintf(buf, "%u\n", (unsigned int)((data->alarms >> nr) & 0x01)); } static int find_temp_source(struct nct6775_data *data, int index, int count) { int source = data->temp_src[index]; int nr; for (nr = 0; nr < count; nr++) { int src; src = data->read_value(data, data->REG_TEMP_SOURCE[nr]) & 0x1f; if (src == source) return nr; } return -ENODEV; } static ssize_t show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); struct nct6775_data *data = nct6775_update_device(dev); unsigned int alarm = 0; int nr; /* * For temperatures, there is no fixed mapping from registers to alarm * bits. Alarm bits are determined by the temperature source mapping. */ nr = find_temp_source(data, sattr->index, data->num_temp_alarms); if (nr >= 0) { int bit = data->ALARM_BITS[nr + TEMP_ALARM_BASE]; alarm = (data->alarms >> bit) & 0x01; } return sprintf(buf, "%u\n", alarm); } static ssize_t show_beep(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); struct nct6775_data *data = nct6775_update_device(dev); int nr = data->BEEP_BITS[sattr->index]; return sprintf(buf, "%u\n", (unsigned int)((data->beeps >> nr) & 0x01)); } static ssize_t store_beep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); struct nct6775_data *data = dev_get_drvdata(dev); int nr = data->BEEP_BITS[sattr->index]; int regindex = nr >> 3; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val > 1) return -EINVAL; mutex_lock(&data->update_lock); if (val) data->beeps |= (1ULL << nr); else data->beeps &= ~(1ULL << nr); data->write_value(data, data->REG_BEEP[regindex], (data->beeps >> (regindex << 3)) & 0xff); mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_beep(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); struct nct6775_data *data = nct6775_update_device(dev); unsigned int beep = 0; int nr; /* * For temperatures, there is no fixed mapping from registers to beep * enable bits. Beep enable bits are determined by the temperature * source mapping. */ nr = find_temp_source(data, sattr->index, data->num_temp_beeps); if (nr >= 0) { int bit = data->BEEP_BITS[nr + TEMP_ALARM_BASE]; beep = (data->beeps >> bit) & 0x01; } return sprintf(buf, "%u\n", beep); } static ssize_t store_temp_beep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); struct nct6775_data *data = dev_get_drvdata(dev); int nr, bit, regindex; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val > 1) return -EINVAL; nr = find_temp_source(data, sattr->index, data->num_temp_beeps); if (nr < 0) return nr; bit = data->BEEP_BITS[nr + TEMP_ALARM_BASE]; regindex = bit >> 3; mutex_lock(&data->update_lock); if (val) data->beeps |= (1ULL << bit); else data->beeps &= ~(1ULL << bit); data->write_value(data, data->REG_BEEP[regindex], (data->beeps >> (regindex << 3)) & 0xff); mutex_unlock(&data->update_lock); return count; } static umode_t nct6775_in_is_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = kobj_to_dev(kobj); struct nct6775_data *data = dev_get_drvdata(dev); int in = index / 5; /* voltage index */ if (!(data->have_in & BIT(in))) return 0; return attr->mode; } SENSOR_TEMPLATE_2(in_input, "in%d_input", S_IRUGO, show_in_reg, NULL, 0, 0); SENSOR_TEMPLATE(in_alarm, "in%d_alarm", S_IRUGO, show_alarm, NULL, 0); SENSOR_TEMPLATE(in_beep, "in%d_beep", S_IWUSR | S_IRUGO, show_beep, store_beep, 0); SENSOR_TEMPLATE_2(in_min, "in%d_min", S_IWUSR | S_IRUGO, show_in_reg, store_in_reg, 0, 1); SENSOR_TEMPLATE_2(in_max, "in%d_max", S_IWUSR | S_IRUGO, show_in_reg, store_in_reg, 0, 2); /* * nct6775_in_is_visible uses the index into the following array * to determine if attributes should be created or not. * Any change in order or content must be matched. */ static struct sensor_device_template *nct6775_attributes_in_template[] = { &sensor_dev_template_in_input, &sensor_dev_template_in_alarm, &sensor_dev_template_in_beep, &sensor_dev_template_in_min, &sensor_dev_template_in_max, NULL }; static const struct sensor_template_group nct6775_in_template_group = { .templates = nct6775_attributes_in_template, .is_visible = nct6775_in_is_visible, }; static ssize_t show_fan(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; return sprintf(buf, "%d\n", data->rpm[nr]); } static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; return sprintf(buf, "%d\n", data->fan_from_reg_min(data->fan_min[nr], data->fan_div[nr])); } static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr])); } static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; unsigned int reg; u8 new_div; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; mutex_lock(&data->update_lock); if (!data->has_fan_div) { /* NCT6776F or NCT6779D; we know this is a 13 bit register */ if (!val) { val = 0xff1f; } else { if (val > 1350000U) val = 135000U; val = 1350000U / val; val = (val & 0x1f) | ((val << 3) & 0xff00); } data->fan_min[nr] = val; goto write_min; /* Leave fan divider alone */ } if (!val) { /* No min limit, alarm disabled */ data->fan_min[nr] = 255; new_div = data->fan_div[nr]; /* No change */ dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1); goto write_div; } reg = 1350000U / val; if (reg >= 128 * 255) { /* * Speed below this value cannot possibly be represented, * even with the highest divider (128) */ data->fan_min[nr] = 254; new_div = 7; /* 128 == BIT(7) */ dev_warn(dev, "fan%u low limit %lu below minimum %u, set to minimum\n", nr + 1, val, data->fan_from_reg_min(254, 7)); } else if (!reg) { /* * Speed above this value cannot possibly be represented, * even with the lowest divider (1) */ data->fan_min[nr] = 1; new_div = 0; /* 1 == BIT(0) */ dev_warn(dev, "fan%u low limit %lu above maximum %u, set to maximum\n", nr + 1, val, data->fan_from_reg_min(1, 0)); } else { /* * Automatically pick the best divider, i.e. the one such * that the min limit will correspond to a register value * in the 96..192 range */ new_div = 0; while (reg > 192 && new_div < 7) { reg >>= 1; new_div++; } data->fan_min[nr] = reg; } write_div: /* * Write both the fan clock divider (if it changed) and the new * fan min (unconditionally) */ if (new_div != data->fan_div[nr]) { dev_dbg(dev, "fan%u clock divider changed from %u to %u\n", nr + 1, div_from_reg(data->fan_div[nr]), div_from_reg(new_div)); data->fan_div[nr] = new_div; nct6775_write_fan_div_common(data, nr); /* Give the chip time to sample a new speed value */ data->last_updated = jiffies; } write_min: data->write_value(data, data->REG_FAN_MIN[nr], data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t show_fan_pulses(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int p = data->fan_pulses[sattr->index]; return sprintf(buf, "%d\n", p ? : 4); } static ssize_t store_fan_pulses(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err; u8 reg; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val > 4) return -EINVAL; mutex_lock(&data->update_lock); data->fan_pulses[nr] = val & 3; reg = data->read_value(data, data->REG_FAN_PULSES[nr]); reg &= ~(0x03 << data->FAN_PULSE_SHIFT[nr]); reg |= (val & 3) << data->FAN_PULSE_SHIFT[nr]; data->write_value(data, data->REG_FAN_PULSES[nr], reg); mutex_unlock(&data->update_lock); return count; } static umode_t nct6775_fan_is_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = kobj_to_dev(kobj); struct nct6775_data *data = dev_get_drvdata(dev); int fan = index / 6; /* fan index */ int nr = index % 6; /* attribute index */ if (!(data->has_fan & BIT(fan))) return 0; if (nr == 1 && data->ALARM_BITS[FAN_ALARM_BASE + fan] == -1) return 0; if (nr == 2 && data->BEEP_BITS[FAN_ALARM_BASE + fan] == -1) return 0; if (nr == 3 && !data->REG_FAN_PULSES[fan]) return 0; if (nr == 4 && !(data->has_fan_min & BIT(fan))) return 0; if (nr == 5 && data->kind != nct6775) return 0; return attr->mode; } SENSOR_TEMPLATE(fan_input, "fan%d_input", S_IRUGO, show_fan, NULL, 0); SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", S_IRUGO, show_alarm, NULL, FAN_ALARM_BASE); SENSOR_TEMPLATE(fan_beep, "fan%d_beep", S_IWUSR | S_IRUGO, show_beep, store_beep, FAN_ALARM_BASE); SENSOR_TEMPLATE(fan_pulses, "fan%d_pulses", S_IWUSR | S_IRUGO, show_fan_pulses, store_fan_pulses, 0); SENSOR_TEMPLATE(fan_min, "fan%d_min", S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 0); SENSOR_TEMPLATE(fan_div, "fan%d_div", S_IRUGO, show_fan_div, NULL, 0); /* * nct6775_fan_is_visible uses the index into the following array * to determine if attributes should be created or not. * Any change in order or content must be matched. */ static struct sensor_device_template *nct6775_attributes_fan_template[] = { &sensor_dev_template_fan_input, &sensor_dev_template_fan_alarm, /* 1 */ &sensor_dev_template_fan_beep, /* 2 */ &sensor_dev_template_fan_pulses, &sensor_dev_template_fan_min, /* 4 */ &sensor_dev_template_fan_div, /* 5 */ NULL }; static const struct sensor_template_group nct6775_fan_template_group = { .templates = nct6775_attributes_fan_template, .is_visible = nct6775_fan_is_visible, .base = 1, }; static ssize_t show_temp_label(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]); } static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->temp[index][nr])); } static ssize_t store_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; int err; long val; err = kstrtol(buf, 10, &val); if (err < 0) return err; mutex_lock(&data->update_lock); data->temp[index][nr] = LM75_TEMP_TO_REG(val); nct6775_write_temp(data, data->reg_temp[index][nr], data->temp[index][nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_offset(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); return sprintf(buf, "%d\n", data->temp_offset[sattr->index] * 1000); } static ssize_t store_temp_offset(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; long val; int err; err = kstrtol(buf, 10, &val); if (err < 0) return err; val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127); mutex_lock(&data->update_lock); data->temp_offset[nr] = val; data->write_value(data, data->REG_TEMP_OFFSET[nr], val); mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; return sprintf(buf, "%d\n", (int)data->temp_type[nr]); } static ssize_t store_temp_type(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err; u8 vbat, diode, vbit, dbit; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val != 1 && val != 3 && val != 4) return -EINVAL; mutex_lock(&data->update_lock); data->temp_type[nr] = val; vbit = 0x02 << nr; dbit = data->DIODE_MASK << nr; vbat = data->read_value(data, data->REG_VBAT) & ~vbit; diode = data->read_value(data, data->REG_DIODE) & ~dbit; switch (val) { case 1: /* CPU diode (diode, current mode) */ vbat |= vbit; diode |= dbit; break; case 3: /* diode, voltage mode */ vbat |= dbit; break; case 4: /* thermistor */ break; } data->write_value(data, data->REG_VBAT, vbat); data->write_value(data, data->REG_DIODE, diode); mutex_unlock(&data->update_lock); return count; } static umode_t nct6775_temp_is_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = kobj_to_dev(kobj); struct nct6775_data *data = dev_get_drvdata(dev); int temp = index / 10; /* temp index */ int nr = index % 10; /* attribute index */ if (!(data->have_temp & BIT(temp))) return 0; if (nr == 1 && !data->temp_label) return 0; if (nr == 2 && find_temp_source(data, temp, data->num_temp_alarms) < 0) return 0; /* alarm */ if (nr == 3 && find_temp_source(data, temp, data->num_temp_beeps) < 0) return 0; /* beep */ if (nr == 4 && !data->reg_temp[1][temp]) /* max */ return 0; if (nr == 5 && !data->reg_temp[2][temp]) /* max_hyst */ return 0; if (nr == 6 && !data->reg_temp[3][temp]) /* crit */ return 0; if (nr == 7 && !data->reg_temp[4][temp]) /* lcrit */ return 0; /* offset and type only apply to fixed sensors */ if (nr > 7 && !(data->have_temp_fixed & BIT(temp))) return 0; return attr->mode; } SENSOR_TEMPLATE_2(temp_input, "temp%d_input", S_IRUGO, show_temp, NULL, 0, 0); SENSOR_TEMPLATE(temp_label, "temp%d_label", S_IRUGO, show_temp_label, NULL, 0); SENSOR_TEMPLATE_2(temp_max, "temp%d_max", S_IRUGO | S_IWUSR, show_temp, store_temp, 0, 1); SENSOR_TEMPLATE_2(temp_max_hyst, "temp%d_max_hyst", S_IRUGO | S_IWUSR, show_temp, store_temp, 0, 2); SENSOR_TEMPLATE_2(temp_crit, "temp%d_crit", S_IRUGO | S_IWUSR, show_temp, store_temp, 0, 3); SENSOR_TEMPLATE_2(temp_lcrit, "temp%d_lcrit", S_IRUGO | S_IWUSR, show_temp, store_temp, 0, 4); SENSOR_TEMPLATE(temp_offset, "temp%d_offset", S_IRUGO | S_IWUSR, show_temp_offset, store_temp_offset, 0); SENSOR_TEMPLATE(temp_type, "temp%d_type", S_IRUGO | S_IWUSR, show_temp_type, store_temp_type, 0); SENSOR_TEMPLATE(temp_alarm, "temp%d_alarm", S_IRUGO, show_temp_alarm, NULL, 0); SENSOR_TEMPLATE(temp_beep, "temp%d_beep", S_IRUGO | S_IWUSR, show_temp_beep, store_temp_beep, 0); /* * nct6775_temp_is_visible uses the index into the following array * to determine if attributes should be created or not. * Any change in order or content must be matched. */ static struct sensor_device_template *nct6775_attributes_temp_template[] = { &sensor_dev_template_temp_input, &sensor_dev_template_temp_label, &sensor_dev_template_temp_alarm, /* 2 */ &sensor_dev_template_temp_beep, /* 3 */ &sensor_dev_template_temp_max, /* 4 */ &sensor_dev_template_temp_max_hyst, /* 5 */ &sensor_dev_template_temp_crit, /* 6 */ &sensor_dev_template_temp_lcrit, /* 7 */ &sensor_dev_template_temp_offset, /* 8 */ &sensor_dev_template_temp_type, /* 9 */ NULL }; static const struct sensor_template_group nct6775_temp_template_group = { .templates = nct6775_attributes_temp_template, .is_visible = nct6775_temp_is_visible, .base = 1, }; static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); return sprintf(buf, "%d\n", data->pwm_mode[sattr->index]); } static ssize_t store_pwm_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err; u8 reg; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val > 1) return -EINVAL; /* Setting DC mode (0) is not supported for all chips/channels */ if (data->REG_PWM_MODE[nr] == 0) { if (!val) return -EINVAL; return count; } mutex_lock(&data->update_lock); data->pwm_mode[nr] = val; reg = data->read_value(data, data->REG_PWM_MODE[nr]); reg &= ~data->PWM_MODE_MASK[nr]; if (!val) reg |= data->PWM_MODE_MASK[nr]; data->write_value(data, data->REG_PWM_MODE[nr], reg); mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; int pwm; /* * For automatic fan control modes, show current pwm readings. * Otherwise, show the configured value. */ if (index == 0 && data->pwm_enable[nr] > manual) pwm = data->read_value(data, data->REG_PWM_READ[nr]); else pwm = data->pwm[index][nr]; return sprintf(buf, "%d\n", pwm); } static ssize_t store_pwm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; unsigned long val; int minval[7] = { 0, 1, 1, data->pwm[2][nr], 0, 0, 0 }; int maxval[7] = { 255, 255, data->pwm[3][nr] ? : 255, 255, 255, 255, 255 }; int err; u8 reg; err = kstrtoul(buf, 10, &val); if (err < 0) return err; val = clamp_val(val, minval[index], maxval[index]); mutex_lock(&data->update_lock); data->pwm[index][nr] = val; data->write_value(data, data->REG_PWM[index][nr], val); if (index == 2) { /* floor: disable if val == 0 */ reg = data->read_value(data, data->REG_TEMP_SEL[nr]); reg &= 0x7f; if (val) reg |= 0x80; data->write_value(data, data->REG_TEMP_SEL[nr], reg); } mutex_unlock(&data->update_lock); return count; } /* Returns 0 if OK, -EINVAL otherwise */ static int check_trip_points(struct nct6775_data *data, int nr) { int i; for (i = 0; i < data->auto_pwm_num - 1; i++) { if (data->auto_temp[nr][i] > data->auto_temp[nr][i + 1]) return -EINVAL; } for (i = 0; i < data->auto_pwm_num - 1; i++) { if (data->auto_pwm[nr][i] > data->auto_pwm[nr][i + 1]) return -EINVAL; } /* validate critical temperature and pwm if enabled (pwm > 0) */ if (data->auto_pwm[nr][data->auto_pwm_num]) { if (data->auto_temp[nr][data->auto_pwm_num - 1] > data->auto_temp[nr][data->auto_pwm_num] || data->auto_pwm[nr][data->auto_pwm_num - 1] > data->auto_pwm[nr][data->auto_pwm_num]) return -EINVAL; } return 0; } static void pwm_update_registers(struct nct6775_data *data, int nr) { u8 reg; switch (data->pwm_enable[nr]) { case off: case manual: break; case speed_cruise: reg = data->read_value(data, data->REG_FAN_MODE[nr]); reg = (reg & ~data->tolerance_mask) | (data->target_speed_tolerance[nr] & data->tolerance_mask); data->write_value(data, data->REG_FAN_MODE[nr], reg); data->write_value(data, data->REG_TARGET[nr], data->target_speed[nr] & 0xff); if (data->REG_TOLERANCE_H) { reg = (data->target_speed[nr] >> 8) & 0x0f; reg |= (data->target_speed_tolerance[nr] & 0x38) << 1; data->write_value(data, data->REG_TOLERANCE_H[nr], reg); } break; case thermal_cruise: data->write_value(data, data->REG_TARGET[nr], data->target_temp[nr]); fallthrough; default: reg = data->read_value(data, data->REG_FAN_MODE[nr]); reg = (reg & ~data->tolerance_mask) | data->temp_tolerance[0][nr]; data->write_value(data, data->REG_FAN_MODE[nr], reg); break; } } static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); return sprintf(buf, "%d\n", data->pwm_enable[sattr->index]); } static ssize_t store_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err; u16 reg; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val > sf4) return -EINVAL; if (val == sf3 && data->kind != nct6775) return -EINVAL; if (val == sf4 && check_trip_points(data, nr)) { dev_err(dev, "Inconsistent trip points, not switching to SmartFan IV mode\n"); dev_err(dev, "Adjust trip points and try again\n"); return -EINVAL; } mutex_lock(&data->update_lock); data->pwm_enable[nr] = val; if (val == off) { /* * turn off pwm control: select manual mode, set pwm to maximum */ data->pwm[0][nr] = 255; data->write_value(data, data->REG_PWM[0][nr], 255); } pwm_update_registers(data, nr); reg = data->read_value(data, data->REG_FAN_MODE[nr]); reg &= 0x0f; reg |= pwm_enable_to_reg(val) << 4; data->write_value(data, data->REG_FAN_MODE[nr], reg); mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm_temp_sel_common(struct nct6775_data *data, char *buf, int src) { int i, sel = 0; for (i = 0; i < NUM_TEMP; i++) { if (!(data->have_temp & BIT(i))) continue; if (src == data->temp_src[i]) { sel = i + 1; break; } } return sprintf(buf, "%d\n", sel); } static ssize_t show_pwm_temp_sel(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int index = sattr->index; return show_pwm_temp_sel_common(data, buf, data->pwm_temp_sel[index]); } static ssize_t store_pwm_temp_sel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err, reg, src; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val == 0 || val > NUM_TEMP) return -EINVAL; if (!(data->have_temp & BIT(val - 1)) || !data->temp_src[val - 1]) return -EINVAL; mutex_lock(&data->update_lock); src = data->temp_src[val - 1]; data->pwm_temp_sel[nr] = src; reg = data->read_value(data, data->REG_TEMP_SEL[nr]); reg &= 0xe0; reg |= src; data->write_value(data, data->REG_TEMP_SEL[nr], reg); mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm_weight_temp_sel(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int index = sattr->index; return show_pwm_temp_sel_common(data, buf, data->pwm_weight_temp_sel[index]); } static ssize_t store_pwm_weight_temp_sel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err, reg, src; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val > NUM_TEMP) return -EINVAL; val = array_index_nospec(val, NUM_TEMP + 1); if (val && (!(data->have_temp & BIT(val - 1)) || !data->temp_src[val - 1])) return -EINVAL; mutex_lock(&data->update_lock); if (val) { src = data->temp_src[val - 1]; data->pwm_weight_temp_sel[nr] = src; reg = data->read_value(data, data->REG_WEIGHT_TEMP_SEL[nr]); reg &= 0xe0; reg |= (src | 0x80); data->write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); } else { data->pwm_weight_temp_sel[nr] = 0; reg = data->read_value(data, data->REG_WEIGHT_TEMP_SEL[nr]); reg &= 0x7f; data->write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); } mutex_unlock(&data->update_lock); return count; } static ssize_t show_target_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); return sprintf(buf, "%d\n", data->target_temp[sattr->index] * 1000); } static ssize_t store_target_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, data->target_temp_mask); mutex_lock(&data->update_lock); data->target_temp[nr] = val; pwm_update_registers(data, nr); mutex_unlock(&data->update_lock); return count; } static ssize_t show_target_speed(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; return sprintf(buf, "%d\n", fan_from_reg16(data->target_speed[nr], data->fan_div[nr])); } static ssize_t store_target_speed(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err; u16 speed; err = kstrtoul(buf, 10, &val); if (err < 0) return err; val = clamp_val(val, 0, 1350000U); speed = fan_to_reg(val, data->fan_div[nr]); mutex_lock(&data->update_lock); data->target_speed[nr] = speed; pwm_update_registers(data, nr); mutex_unlock(&data->update_lock); return count; } static ssize_t show_temp_tolerance(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; return sprintf(buf, "%d\n", data->temp_tolerance[index][nr] * 1000); } static ssize_t store_temp_tolerance(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; /* Limit tolerance as needed */ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, data->tolerance_mask); mutex_lock(&data->update_lock); data->temp_tolerance[index][nr] = val; if (index) pwm_update_registers(data, nr); else data->write_value(data, data->REG_CRITICAL_TEMP_TOLERANCE[nr], val); mutex_unlock(&data->update_lock); return count; } /* * Fan speed tolerance is a tricky beast, since the associated register is * a tick counter, but the value is reported and configured as rpm. * Compute resulting low and high rpm values and report the difference. * A fan speed tolerance only makes sense if a fan target speed has been * configured, so only display values other than 0 if that is the case. */ static ssize_t show_speed_tolerance(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; int target = data->target_speed[nr]; int tolerance = 0; if (target) { int low = target - data->target_speed_tolerance[nr]; int high = target + data->target_speed_tolerance[nr]; if (low <= 0) low = 1; if (high > 0xffff) high = 0xffff; if (high < low) high = low; tolerance = (fan_from_reg16(low, data->fan_div[nr]) - fan_from_reg16(high, data->fan_div[nr])) / 2; } return sprintf(buf, "%d\n", tolerance); } static ssize_t store_speed_tolerance(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr); int nr = sattr->index; unsigned long val; int err; int low, high; err = kstrtoul(buf, 10, &val); if (err < 0) return err; high = fan_from_reg16(data->target_speed[nr], data->fan_div[nr]) + val; low = fan_from_reg16(data->target_speed[nr], data->fan_div[nr]) - val; if (low <= 0) low = 1; if (high < low) high = low; val = (fan_to_reg(low, data->fan_div[nr]) - fan_to_reg(high, data->fan_div[nr])) / 2; /* Limit tolerance as needed */ val = clamp_val(val, 0, data->speed_tolerance_limit); mutex_lock(&data->update_lock); data->target_speed_tolerance[nr] = val; pwm_update_registers(data, nr); mutex_unlock(&data->update_lock); return count; } SENSOR_TEMPLATE_2(pwm, "pwm%d", S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 0); SENSOR_TEMPLATE(pwm_mode, "pwm%d_mode", S_IWUSR | S_IRUGO, show_pwm_mode, store_pwm_mode, 0); SENSOR_TEMPLATE(pwm_enable, "pwm%d_enable", S_IWUSR | S_IRUGO, show_pwm_enable, store_pwm_enable, 0); SENSOR_TEMPLATE(pwm_temp_sel, "pwm%d_temp_sel", S_IWUSR | S_IRUGO, show_pwm_temp_sel, store_pwm_temp_sel, 0); SENSOR_TEMPLATE(pwm_target_temp, "pwm%d_target_temp", S_IWUSR | S_IRUGO, show_target_temp, store_target_temp, 0); SENSOR_TEMPLATE(fan_target, "fan%d_target", S_IWUSR | S_IRUGO, show_target_speed, store_target_speed, 0); SENSOR_TEMPLATE(fan_tolerance, "fan%d_tolerance", S_IWUSR | S_IRUGO, show_speed_tolerance, store_speed_tolerance, 0); /* Smart Fan registers */ static ssize_t show_weight_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; return sprintf(buf, "%d\n", data->weight_temp[index][nr] * 1000); } static ssize_t store_weight_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255); mutex_lock(&data->update_lock); data->weight_temp[index][nr] = val; data->write_value(data, data->REG_WEIGHT_TEMP[index][nr], val); mutex_unlock(&data->update_lock); return count; } SENSOR_TEMPLATE(pwm_weight_temp_sel, "pwm%d_weight_temp_sel", S_IWUSR | S_IRUGO, show_pwm_weight_temp_sel, store_pwm_weight_temp_sel, 0); SENSOR_TEMPLATE_2(pwm_weight_temp_step, "pwm%d_weight_temp_step", S_IWUSR | S_IRUGO, show_weight_temp, store_weight_temp, 0, 0); SENSOR_TEMPLATE_2(pwm_weight_temp_step_tol, "pwm%d_weight_temp_step_tol", S_IWUSR | S_IRUGO, show_weight_temp, store_weight_temp, 0, 1); SENSOR_TEMPLATE_2(pwm_weight_temp_step_base, "pwm%d_weight_temp_step_base", S_IWUSR | S_IRUGO, show_weight_temp, store_weight_temp, 0, 2); SENSOR_TEMPLATE_2(pwm_weight_duty_step, "pwm%d_weight_duty_step", S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 5); SENSOR_TEMPLATE_2(pwm_weight_duty_base, "pwm%d_weight_duty_base", S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 6); static ssize_t show_fan_time(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; return sprintf(buf, "%d\n", step_time_from_reg(data->fan_time[index][nr], data->pwm_mode[nr])); } static ssize_t store_fan_time(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int index = sattr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err < 0) return err; val = step_time_to_reg(val, data->pwm_mode[nr]); mutex_lock(&data->update_lock); data->fan_time[index][nr] = val; data->write_value(data, data->REG_FAN_TIME[index][nr], val); mutex_unlock(&data->update_lock); return count; } static ssize_t show_auto_pwm(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); return sprintf(buf, "%d\n", data->auto_pwm[sattr->nr][sattr->index]); } static ssize_t store_auto_pwm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int point = sattr->index; unsigned long val; int err; u8 reg; err = kstrtoul(buf, 10, &val); if (err < 0) return err; if (val > 255) return -EINVAL; if (point == data->auto_pwm_num) { if (data->kind != nct6775 && !val) return -EINVAL; if (data->kind != nct6779 && val) val = 0xff; } mutex_lock(&data->update_lock); data->auto_pwm[nr][point] = val; if (point < data->auto_pwm_num) { data->write_value(data, NCT6775_AUTO_PWM(data, nr, point), data->auto_pwm[nr][point]); } else { switch (data->kind) { case nct6775: /* disable if needed (pwm == 0) */ reg = data->read_value(data, NCT6775_REG_CRITICAL_ENAB[nr]); if (val) reg |= 0x02; else reg &= ~0x02; data->write_value(data, NCT6775_REG_CRITICAL_ENAB[nr], reg); break; case nct6776: break; /* always enabled, nothing to do */ case nct6106: case nct6116: case nct6779: case nct6791: case nct6792: case nct6793: case nct6795: case nct6796: case nct6797: case nct6798: data->write_value(data, data->REG_CRITICAL_PWM[nr], val); reg = data->read_value(data, data->REG_CRITICAL_PWM_ENABLE[nr]); if (val == 255) reg &= ~data->CRITICAL_PWM_ENABLE_MASK; else reg |= data->CRITICAL_PWM_ENABLE_MASK; data->write_value(data, data->REG_CRITICAL_PWM_ENABLE[nr], reg); break; } } mutex_unlock(&data->update_lock); return count; } static ssize_t show_auto_temp(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = nct6775_update_device(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int point = sattr->index; /* * We don't know for sure if the temperature is signed or unsigned. * Assume it is unsigned. */ return sprintf(buf, "%d\n", data->auto_temp[nr][point] * 1000); } static ssize_t store_auto_temp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); int nr = sattr->nr; int point = sattr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; if (val > 255000) return -EINVAL; mutex_lock(&data->update_lock); data->auto_temp[nr][point] = DIV_ROUND_CLOSEST(val, 1000); if (point < data->auto_pwm_num) { data->write_value(data, NCT6775_AUTO_TEMP(data, nr, point), data->auto_temp[nr][point]); } else { data->write_value(data, data->REG_CRITICAL_TEMP[nr], data->auto_temp[nr][point]); } mutex_unlock(&data->update_lock); return count; } static umode_t nct6775_pwm_is_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = kobj_to_dev(kobj); struct nct6775_data *data = dev_get_drvdata(dev); int pwm = index / 36; /* pwm index */ int nr = index % 36; /* attribute index */ if (!(data->has_pwm & BIT(pwm))) return 0; if ((nr >= 14 && nr <= 18) || nr == 21) /* weight */ if (!data->REG_WEIGHT_TEMP_SEL[pwm]) return 0; if (nr == 19 && data->REG_PWM[3] == NULL) /* pwm_max */ return 0; if (nr == 20 && data->REG_PWM[4] == NULL) /* pwm_step */ return 0; if (nr == 21 && data->REG_PWM[6] == NULL) /* weight_duty_base */ return 0; if (nr >= 22 && nr <= 35) { /* auto point */ int api = (nr - 22) / 2; /* auto point index */ if (api > data->auto_pwm_num) return 0; } return attr->mode; } SENSOR_TEMPLATE_2(pwm_stop_time, "pwm%d_stop_time", S_IWUSR | S_IRUGO, show_fan_time, store_fan_time, 0, 0); SENSOR_TEMPLATE_2(pwm_step_up_time, "pwm%d_step_up_time", S_IWUSR | S_IRUGO, show_fan_time, store_fan_time, 0, 1); SENSOR_TEMPLATE_2(pwm_step_down_time, "pwm%d_step_down_time", S_IWUSR | S_IRUGO, show_fan_time, store_fan_time, 0, 2); SENSOR_TEMPLATE_2(pwm_start, "pwm%d_start", S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 1); SENSOR_TEMPLATE_2(pwm_floor, "pwm%d_floor", S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 2); SENSOR_TEMPLATE_2(pwm_temp_tolerance, "pwm%d_temp_tolerance", S_IWUSR | S_IRUGO, show_temp_tolerance, store_temp_tolerance, 0, 0); SENSOR_TEMPLATE_2(pwm_crit_temp_tolerance, "pwm%d_crit_temp_tolerance", S_IWUSR | S_IRUGO, show_temp_tolerance, store_temp_tolerance, 0, 1); SENSOR_TEMPLATE_2(pwm_max, "pwm%d_max", S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 3); SENSOR_TEMPLATE_2(pwm_step, "pwm%d_step", S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0, 4); SENSOR_TEMPLATE_2(pwm_auto_point1_pwm, "pwm%d_auto_point1_pwm", S_IWUSR | S_IRUGO, show_auto_pwm, store_auto_pwm, 0, 0); SENSOR_TEMPLATE_2(pwm_auto_point1_temp, "pwm%d_auto_point1_temp", S_IWUSR | S_IRUGO, show_auto_temp, store_auto_temp, 0, 0); SENSOR_TEMPLATE_2(pwm_auto_point2_pwm, "pwm%d_auto_point2_pwm", S_IWUSR | S_IRUGO, show_auto_pwm, store_auto_pwm, 0, 1); SENSOR_TEMPLATE_2(pwm_auto_point2_temp, "pwm%d_auto_point2_temp", S_IWUSR | S_IRUGO, show_auto_temp, store_auto_temp, 0, 1); SENSOR_TEMPLATE_2(pwm_auto_point3_pwm, "pwm%d_auto_point3_pwm", S_IWUSR | S_IRUGO, show_auto_pwm, store_auto_pwm, 0, 2); SENSOR_TEMPLATE_2(pwm_auto_point3_temp, "pwm%d_auto_point3_temp", S_IWUSR | S_IRUGO, show_auto_temp, store_auto_temp, 0, 2); SENSOR_TEMPLATE_2(pwm_auto_point4_pwm, "pwm%d_auto_point4_pwm", S_IWUSR | S_IRUGO, show_auto_pwm, store_auto_pwm, 0, 3); SENSOR_TEMPLATE_2(pwm_auto_point4_temp, "pwm%d_auto_point4_temp", S_IWUSR | S_IRUGO, show_auto_temp, store_auto_temp, 0, 3); SENSOR_TEMPLATE_2(pwm_auto_point5_pwm, "pwm%d_auto_point5_pwm", S_IWUSR | S_IRUGO, show_auto_pwm, store_auto_pwm, 0, 4); SENSOR_TEMPLATE_2(pwm_auto_point5_temp, "pwm%d_auto_point5_temp", S_IWUSR | S_IRUGO, show_auto_temp, store_auto_temp, 0, 4); SENSOR_TEMPLATE_2(pwm_auto_point6_pwm, "pwm%d_auto_point6_pwm", S_IWUSR | S_IRUGO, show_auto_pwm, store_auto_pwm, 0, 5); SENSOR_TEMPLATE_2(pwm_auto_point6_temp, "pwm%d_auto_point6_temp", S_IWUSR | S_IRUGO, show_auto_temp, store_auto_temp, 0, 5); SENSOR_TEMPLATE_2(pwm_auto_point7_pwm, "pwm%d_auto_point7_pwm", S_IWUSR | S_IRUGO, show_auto_pwm, store_auto_pwm, 0, 6); SENSOR_TEMPLATE_2(pwm_auto_point7_temp, "pwm%d_auto_point7_temp", S_IWUSR | S_IRUGO, show_auto_temp, store_auto_temp, 0, 6); /* * nct6775_pwm_is_visible uses the index into the following array * to determine if attributes should be created or not. * Any change in order or content must be matched. */ static struct sensor_device_template *nct6775_attributes_pwm_template[] = { &sensor_dev_template_pwm, &sensor_dev_template_pwm_mode, &sensor_dev_template_pwm_enable, &sensor_dev_template_pwm_temp_sel, &sensor_dev_template_pwm_temp_tolerance, &sensor_dev_template_pwm_crit_temp_tolerance, &sensor_dev_template_pwm_target_temp, &sensor_dev_template_fan_target, &sensor_dev_template_fan_tolerance, &sensor_dev_template_pwm_stop_time, &sensor_dev_template_pwm_step_up_time, &sensor_dev_template_pwm_step_down_time, &sensor_dev_template_pwm_start, &sensor_dev_template_pwm_floor, &sensor_dev_template_pwm_weight_temp_sel, /* 14 */ &sensor_dev_template_pwm_weight_temp_step, &sensor_dev_template_pwm_weight_temp_step_tol, &sensor_dev_template_pwm_weight_temp_step_base, &sensor_dev_template_pwm_weight_duty_step, /* 18 */ &sensor_dev_template_pwm_max, /* 19 */ &sensor_dev_template_pwm_step, /* 20 */ &sensor_dev_template_pwm_weight_duty_base, /* 21 */ &sensor_dev_template_pwm_auto_point1_pwm, /* 22 */ &sensor_dev_template_pwm_auto_point1_temp, &sensor_dev_template_pwm_auto_point2_pwm, &sensor_dev_template_pwm_auto_point2_temp, &sensor_dev_template_pwm_auto_point3_pwm, &sensor_dev_template_pwm_auto_point3_temp, &sensor_dev_template_pwm_auto_point4_pwm, &sensor_dev_template_pwm_auto_point4_temp, &sensor_dev_template_pwm_auto_point5_pwm, &sensor_dev_template_pwm_auto_point5_temp, &sensor_dev_template_pwm_auto_point6_pwm, &sensor_dev_template_pwm_auto_point6_temp, &sensor_dev_template_pwm_auto_point7_pwm, &sensor_dev_template_pwm_auto_point7_temp, /* 35 */ NULL }; static const struct sensor_template_group nct6775_pwm_template_group = { .templates = nct6775_attributes_pwm_template, .is_visible = nct6775_pwm_is_visible, .base = 1, }; static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct nct6775_data *data = dev_get_drvdata(dev); return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); } static DEVICE_ATTR_RO(cpu0_vid); /* Case open detection */ static ssize_t clear_caseopen(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); struct nct6775_sio_data *sio_data = dev_get_platdata(dev); int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE; unsigned long val; u8 reg; int ret; if (kstrtoul(buf, 10, &val) || val != 0) return -EINVAL; mutex_lock(&data->update_lock); /* * Use CR registers to clear caseopen status. * The CR registers are the same for all chips, and not all chips * support clearing the caseopen status through "regular" registers. */ ret = sio_data->sio_enter(sio_data); if (ret) { count = ret; goto error; } sio_data->sio_select(sio_data, NCT6775_LD_ACPI); reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]); reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr]; sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr]; sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); sio_data->sio_exit(sio_data); data->valid = false; /* Force cache refresh */ error: mutex_unlock(&data->update_lock); return count; } static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm, clear_caseopen, INTRUSION_ALARM_BASE); static SENSOR_DEVICE_ATTR(intrusion1_alarm, S_IWUSR | S_IRUGO, show_alarm, clear_caseopen, INTRUSION_ALARM_BASE + 1); static SENSOR_DEVICE_ATTR(intrusion0_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, INTRUSION_ALARM_BASE); static SENSOR_DEVICE_ATTR(intrusion1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, INTRUSION_ALARM_BASE + 1); static SENSOR_DEVICE_ATTR(beep_enable, S_IWUSR | S_IRUGO, show_beep, store_beep, BEEP_ENABLE_BASE); static umode_t nct6775_other_is_visible(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = kobj_to_dev(kobj); struct nct6775_data *data = dev_get_drvdata(dev); if (index == 0 && !data->have_vid) return 0; if (index == 1 || index == 2) { if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0) return 0; } if (index == 3 || index == 4) { if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0) return 0; } return attr->mode; } /* * nct6775_other_is_visible uses the index into the following array * to determine if attributes should be created or not. * Any change in order or content must be matched. */ static struct attribute *nct6775_attributes_other[] = { &dev_attr_cpu0_vid.attr, /* 0 */ &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */ &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */ &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */ &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */ &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */ NULL }; static const struct attribute_group nct6775_group_other = { .attrs = nct6775_attributes_other, .is_visible = nct6775_other_is_visible, }; static inline void nct6775_init_device(struct nct6775_data *data) { int i; u8 tmp, diode; /* Start monitoring if needed */ if (data->REG_CONFIG) { tmp = data->read_value(data, data->REG_CONFIG); if (!(tmp & 0x01)) data->write_value(data, data->REG_CONFIG, tmp | 0x01); } /* Enable temperature sensors if needed */ for (i = 0; i < NUM_TEMP; i++) { if (!(data->have_temp & BIT(i))) continue; if (!data->reg_temp_config[i]) continue; tmp = data->read_value(data, data->reg_temp_config[i]); if (tmp & 0x01) data->write_value(data, data->reg_temp_config[i], tmp & 0xfe); } /* Enable VBAT monitoring if needed */ tmp = data->read_value(data, data->REG_VBAT); if (!(tmp & 0x01)) data->write_value(data, data->REG_VBAT, tmp | 0x01); diode = data->read_value(data, data->REG_DIODE); for (i = 0; i < data->temp_fixed_num; i++) { if (!(data->have_temp_fixed & BIT(i))) continue; if ((tmp & (data->DIODE_MASK << i))) /* diode */ data->temp_type[i] = 3 - ((diode >> i) & data->DIODE_MASK); else /* thermistor */ data->temp_type[i] = 4; } } static void nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data) { bool fan3pin = false, fan4pin = false, fan4min = false; bool fan5pin = false, fan6pin = false, fan7pin = false; bool pwm3pin = false, pwm4pin = false, pwm5pin = false; bool pwm6pin = false, pwm7pin = false; /* Store SIO_REG_ENABLE for use during resume */ sio_data->sio_select(sio_data, NCT6775_LD_HWM); data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); /* fan4 and fan5 share some pins with the GPIO and serial flash */ if (data->kind == nct6775) { int cr2c = sio_data->sio_inb(sio_data, 0x2c); fan3pin = cr2c & BIT(6); pwm3pin = cr2c & BIT(7); /* On NCT6775, fan4 shares pins with the fdc interface */ fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80); } else if (data->kind == nct6776) { bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80; const char *board_vendor, *board_name; board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); board_name = dmi_get_system_info(DMI_BOARD_NAME); if (board_name && board_vendor && !strcmp(board_vendor, "ASRock")) { /* * Auxiliary fan monitoring is not enabled on ASRock * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode. * Observed with BIOS version 2.00. */ if (!strcmp(board_name, "Z77 Pro4-M")) { if ((data->sio_reg_enable & 0xe0) != 0xe0) { data->sio_reg_enable |= 0xe0; sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable); } } } if (data->sio_reg_enable & 0x80) fan3pin = gpok; else fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40); if (data->sio_reg_enable & 0x40) fan4pin = gpok; else fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01; if (data->sio_reg_enable & 0x20) fan5pin = gpok; else fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02; fan4min = fan4pin; pwm3pin = fan3pin; } else if (data->kind == nct6106) { int cr24 = sio_data->sio_inb(sio_data, 0x24); fan3pin = !(cr24 & 0x80); pwm3pin = cr24 & 0x08; } else if (data->kind == nct6116) { int cr1a = sio_data->sio_inb(sio_data, 0x1a); int cr1b = sio_data->sio_inb(sio_data, 0x1b); int cr24 = sio_data->sio_inb(sio_data, 0x24); int cr2a = sio_data->sio_inb(sio_data, 0x2a); int cr2b = sio_data->sio_inb(sio_data, 0x2b); int cr2f = sio_data->sio_inb(sio_data, 0x2f); fan3pin = !(cr2b & 0x10); fan4pin = (cr2b & 0x80) || // pin 1(2) (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66) fan5pin = (cr2b & 0x80) || // pin 126(127) (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96) pwm3pin = fan3pin && (cr24 & 0x08); pwm4pin = fan4pin; pwm5pin = fan5pin; } else { /* * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, * NCT6797D, NCT6798D */ int cr1a = sio_data->sio_inb(sio_data, 0x1a); int cr1b = sio_data->sio_inb(sio_data, 0x1b); int cr1c = sio_data->sio_inb(sio_data, 0x1c); int cr1d = sio_data->sio_inb(sio_data, 0x1d); int cr2a = sio_data->sio_inb(sio_data, 0x2a); int cr2b = sio_data->sio_inb(sio_data, 0x2b); int cr2d = sio_data->sio_inb(sio_data, 0x2d); int cr2f = sio_data->sio_inb(sio_data, 0x2f); bool dsw_en = cr2f & BIT(3); bool ddr4_en = cr2f & BIT(4); int cre0; int creb; int cred; sio_data->sio_select(sio_data, NCT6775_LD_12); cre0 = sio_data->sio_inb(sio_data, 0xe0); creb = sio_data->sio_inb(sio_data, 0xeb); cred = sio_data->sio_inb(sio_data, 0xed); fan3pin = !(cr1c & BIT(5)); fan4pin = !(cr1c & BIT(6)); fan5pin = !(cr1c & BIT(7)); pwm3pin = !(cr1c & BIT(0)); pwm4pin = !(cr1c & BIT(1)); pwm5pin = !(cr1c & BIT(2)); switch (data->kind) { case nct6791: fan6pin = cr2d & BIT(1); pwm6pin = cr2d & BIT(0); break; case nct6792: fan6pin = !dsw_en && (cr2d & BIT(1)); pwm6pin = !dsw_en && (cr2d & BIT(0)); break; case nct6793: fan5pin |= cr1b & BIT(5); fan5pin |= creb & BIT(5); fan6pin = !dsw_en && (cr2d & BIT(1)); fan6pin |= creb & BIT(3); pwm5pin |= cr2d & BIT(7); pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); pwm6pin = !dsw_en && (cr2d & BIT(0)); pwm6pin |= creb & BIT(2); break; case nct6795: fan5pin |= cr1b & BIT(5); fan5pin |= creb & BIT(5); fan6pin = (cr2a & BIT(4)) && (!dsw_en || (cred & BIT(4))); fan6pin |= creb & BIT(3); pwm5pin |= cr2d & BIT(7); pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); pwm6pin |= creb & BIT(2); break; case nct6796: fan5pin |= cr1b & BIT(5); fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0)); fan5pin |= creb & BIT(5); fan6pin = (cr2a & BIT(4)) && (!dsw_en || (cred & BIT(4))); fan6pin |= creb & BIT(3); fan7pin = !(cr2b & BIT(2)); pwm5pin |= cr2d & BIT(7); pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0)); pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2)); pwm6pin |= creb & BIT(2); pwm7pin = !(cr1d & (BIT(2) | BIT(3))); break; case nct6797: fan5pin |= !ddr4_en && (cr1b & BIT(5)); fan5pin |= creb & BIT(5); fan6pin = cr2a & BIT(4); fan6pin |= creb & BIT(3); fan7pin = cr1a & BIT(1); pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); pwm5pin |= !ddr4_en && (cr2d & BIT(7)); pwm6pin = creb & BIT(2); pwm6pin |= cred & BIT(2); pwm7pin = cr1d & BIT(4); break; case nct6798: fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3)); fan6pin |= cr2a & BIT(4); fan6pin |= creb & BIT(5); fan7pin = cr1b & BIT(5); fan7pin |= !(cr2b & BIT(2)); fan7pin |= creb & BIT(3); pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4)); pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3)); pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0)); pwm7pin = !(cr1d & (BIT(2) | BIT(3))); pwm7pin |= cr2d & BIT(7); pwm7pin |= creb & BIT(2); break; default: /* NCT6779D */ break; } fan4min = fan4pin; } /* fan 1 and 2 (0x03) are always present */ data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) | (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) | (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6); data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) | (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6); } static void add_temp_sensors(struct nct6775_data *data, const u16 *regp, int *available, int *mask) { int i; u8 src; for (i = 0; i < data->pwm_num && *available; i++) { int index; if (!regp[i]) continue; src = data->read_value(data, regp[i]); src &= 0x1f; if (!src || (*mask & BIT(src))) continue; if (!(data->temp_mask & BIT(src))) continue; index = __ffs(*available); data->write_value(data, data->REG_TEMP_SOURCE[index], src); *available &= ~BIT(index); *mask |= BIT(src); } } static int nct6775_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct nct6775_sio_data *sio_data = dev_get_platdata(dev); struct nct6775_data *data; struct resource *res; int i, s, err = 0; int src, mask, available; const u16 *reg_temp, *reg_temp_over, *reg_temp_hyst, *reg_temp_config; const u16 *reg_temp_mon, *reg_temp_alternate, *reg_temp_crit; const u16 *reg_temp_crit_l = NULL, *reg_temp_crit_h = NULL; int num_reg_temp, num_reg_temp_mon; u8 cr2a; struct attribute_group *group; struct device *hwmon_dev; int num_attr_groups = 0; if (sio_data->access == access_direct) { res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, DRVNAME)) return -EBUSY; } data = devm_kzalloc(&pdev->dev, sizeof(struct nct6775_data), GFP_KERNEL); if (!data) return -ENOMEM; data->kind = sio_data->kind; data->sioreg = sio_data->sioreg; if (sio_data->access == access_direct) { data->addr = res->start; data->read_value = nct6775_read_value; data->write_value = nct6775_write_value; } else { data->read_value = nct6775_wmi_read_value; data->write_value = nct6775_wmi_write_value; } mutex_init(&data->update_lock); data->name = nct6775_device_names[data->kind]; data->bank = 0xff; /* Force initial bank selection */ platform_set_drvdata(pdev, data); switch (data->kind) { case nct6106: data->in_num = 9; data->pwm_num = 3; data->auto_pwm_num = 4; data->temp_fixed_num = 3; data->num_temp_alarms = 6; data->num_temp_beeps = 6; data->fan_from_reg = fan_from_reg13; data->fan_from_reg_min = fan_from_reg13; data->temp_label = nct6776_temp_label; data->temp_mask = NCT6776_TEMP_MASK; data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; data->REG_VBAT = NCT6106_REG_VBAT; data->REG_DIODE = NCT6106_REG_DIODE; data->DIODE_MASK = NCT6106_DIODE_MASK; data->REG_VIN = NCT6106_REG_IN; data->REG_IN_MINMAX[0] = NCT6106_REG_IN_MIN; data->REG_IN_MINMAX[1] = NCT6106_REG_IN_MAX; data->REG_TARGET = NCT6106_REG_TARGET; data->REG_FAN = NCT6106_REG_FAN; data->REG_FAN_MODE = NCT6106_REG_FAN_MODE; data->REG_FAN_MIN = NCT6106_REG_FAN_MIN; data->REG_FAN_PULSES = NCT6106_REG_FAN_PULSES; data->FAN_PULSE_SHIFT = NCT6106_FAN_PULSE_SHIFT; data->REG_FAN_TIME[0] = NCT6106_REG_FAN_STOP_TIME; data->REG_FAN_TIME[1] = NCT6106_REG_FAN_STEP_UP_TIME; data->REG_FAN_TIME[2] = NCT6106_REG_FAN_STEP_DOWN_TIME; data->REG_TOLERANCE_H = NCT6106_REG_TOLERANCE_H; data->REG_PWM[0] = NCT6116_REG_PWM; data->REG_PWM[1] = NCT6106_REG_FAN_START_OUTPUT; data->REG_PWM[2] = NCT6106_REG_FAN_STOP_OUTPUT; data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP; data->REG_PWM[6] = NCT6106_REG_WEIGHT_DUTY_BASE; data->REG_PWM_READ = NCT6106_REG_PWM_READ; data->REG_PWM_MODE = NCT6106_REG_PWM_MODE; data->PWM_MODE_MASK = NCT6106_PWM_MODE_MASK; data->REG_AUTO_TEMP = NCT6106_REG_AUTO_TEMP; data->REG_AUTO_PWM = NCT6106_REG_AUTO_PWM; data->REG_CRITICAL_TEMP = NCT6106_REG_CRITICAL_TEMP; data->REG_CRITICAL_TEMP_TOLERANCE = NCT6106_REG_CRITICAL_TEMP_TOLERANCE; data->REG_CRITICAL_PWM_ENABLE = NCT6106_REG_CRITICAL_PWM_ENABLE; data->CRITICAL_PWM_ENABLE_MASK = NCT6106_CRITICAL_PWM_ENABLE_MASK; data->REG_CRITICAL_PWM = NCT6106_REG_CRITICAL_PWM; data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET; data->REG_TEMP_SOURCE = NCT6106_REG_TEMP_SOURCE; data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL; data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL; data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP; data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL; data->REG_WEIGHT_TEMP[2] = NCT6106_REG_WEIGHT_TEMP_BASE; data->REG_ALARM = NCT6106_REG_ALARM; data->ALARM_BITS = NCT6106_ALARM_BITS; data->REG_BEEP = NCT6106_REG_BEEP; data->BEEP_BITS = NCT6106_BEEP_BITS; reg_temp = NCT6106_REG_TEMP; reg_temp_mon = NCT6106_REG_TEMP_MON; num_reg_temp = ARRAY_SIZE(NCT6106_REG_TEMP); num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON); reg_temp_over = NCT6106_REG_TEMP_OVER; reg_temp_hyst = NCT6106_REG_TEMP_HYST; reg_temp_config = NCT6106_REG_TEMP_CONFIG; reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6106_REG_TEMP_CRIT; reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L; reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H; break; case nct6116: data->in_num = 9; data->pwm_num = 3; data->auto_pwm_num = 4; data->temp_fixed_num = 3; data->num_temp_alarms = 3; data->num_temp_beeps = 3; data->fan_from_reg = fan_from_reg13; data->fan_from_reg_min = fan_from_reg13; data->temp_label = nct6776_temp_label; data->temp_mask = NCT6776_TEMP_MASK; data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; data->REG_VBAT = NCT6106_REG_VBAT; data->REG_DIODE = NCT6106_REG_DIODE; data->DIODE_MASK = NCT6106_DIODE_MASK; data->REG_VIN = NCT6106_REG_IN; data->REG_IN_MINMAX[0] = NCT6106_REG_IN_MIN; data->REG_IN_MINMAX[1] = NCT6106_REG_IN_MAX; data->REG_TARGET = NCT6116_REG_TARGET; data->REG_FAN = NCT6116_REG_FAN; data->REG_FAN_MODE = NCT6116_REG_FAN_MODE; data->REG_FAN_MIN = NCT6116_REG_FAN_MIN; data->REG_FAN_PULSES = NCT6116_REG_FAN_PULSES; data->FAN_PULSE_SHIFT = NCT6116_FAN_PULSE_SHIFT; data->REG_FAN_TIME[0] = NCT6116_REG_FAN_STOP_TIME; data->REG_FAN_TIME[1] = NCT6116_REG_FAN_STEP_UP_TIME; data->REG_FAN_TIME[2] = NCT6116_REG_FAN_STEP_DOWN_TIME; data->REG_TOLERANCE_H = NCT6116_REG_TOLERANCE_H; data->REG_PWM[0] = NCT6116_REG_PWM; data->REG_PWM[1] = NCT6116_REG_FAN_START_OUTPUT; data->REG_PWM[2] = NCT6116_REG_FAN_STOP_OUTPUT; data->REG_PWM[5] = NCT6106_REG_WEIGHT_DUTY_STEP; data->REG_PWM[6] = NCT6106_REG_WEIGHT_DUTY_BASE; data->REG_PWM_READ = NCT6106_REG_PWM_READ; data->REG_PWM_MODE = NCT6106_REG_PWM_MODE; data->PWM_MODE_MASK = NCT6106_PWM_MODE_MASK; data->REG_AUTO_TEMP = NCT6116_REG_AUTO_TEMP; data->REG_AUTO_PWM = NCT6116_REG_AUTO_PWM; data->REG_CRITICAL_TEMP = NCT6116_REG_CRITICAL_TEMP; data->REG_CRITICAL_TEMP_TOLERANCE = NCT6116_REG_CRITICAL_TEMP_TOLERANCE; data->REG_CRITICAL_PWM_ENABLE = NCT6116_REG_CRITICAL_PWM_ENABLE; data->CRITICAL_PWM_ENABLE_MASK = NCT6106_CRITICAL_PWM_ENABLE_MASK; data->REG_CRITICAL_PWM = NCT6116_REG_CRITICAL_PWM; data->REG_TEMP_OFFSET = NCT6106_REG_TEMP_OFFSET; data->REG_TEMP_SOURCE = NCT6116_REG_TEMP_SOURCE; data->REG_TEMP_SEL = NCT6116_REG_TEMP_SEL; data->REG_WEIGHT_TEMP_SEL = NCT6106_REG_WEIGHT_TEMP_SEL; data->REG_WEIGHT_TEMP[0] = NCT6106_REG_WEIGHT_TEMP_STEP; data->REG_WEIGHT_TEMP[1] = NCT6106_REG_WEIGHT_TEMP_STEP_TOL; data->REG_WEIGHT_TEMP[2] = NCT6106_REG_WEIGHT_TEMP_BASE; data->REG_ALARM = NCT6106_REG_ALARM; data->ALARM_BITS = NCT6116_ALARM_BITS; data->REG_BEEP = NCT6106_REG_BEEP; data->BEEP_BITS = NCT6116_BEEP_BITS; reg_temp = NCT6106_REG_TEMP; reg_temp_mon = NCT6106_REG_TEMP_MON; num_reg_temp = ARRAY_SIZE(NCT6106_REG_TEMP); num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON); reg_temp_over = NCT6106_REG_TEMP_OVER; reg_temp_hyst = NCT6106_REG_TEMP_HYST; reg_temp_config = NCT6106_REG_TEMP_CONFIG; reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6106_REG_TEMP_CRIT; reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L; reg_temp_crit_h = NCT6106_REG_TEMP_CRIT_H; break; case nct6775: data->in_num = 9; data->pwm_num = 3; data->auto_pwm_num = 6; data->has_fan_div = true; data->temp_fixed_num = 3; data->num_temp_alarms = 3; data->num_temp_beeps = 3; data->ALARM_BITS = NCT6775_ALARM_BITS; data->BEEP_BITS = NCT6775_BEEP_BITS; data->fan_from_reg = fan_from_reg16; data->fan_from_reg_min = fan_from_reg8; data->target_temp_mask = 0x7f; data->tolerance_mask = 0x0f; data->speed_tolerance_limit = 15; data->temp_label = nct6775_temp_label; data->temp_mask = NCT6775_TEMP_MASK; data->virt_temp_mask = NCT6775_VIRT_TEMP_MASK; data->REG_CONFIG = NCT6775_REG_CONFIG; data->REG_VBAT = NCT6775_REG_VBAT; data->REG_DIODE = NCT6775_REG_DIODE; data->DIODE_MASK = NCT6775_DIODE_MASK; data->REG_VIN = NCT6775_REG_IN; data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; data->REG_TARGET = NCT6775_REG_TARGET; data->REG_FAN = NCT6775_REG_FAN; data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; data->REG_FAN_MIN = NCT6775_REG_FAN_MIN; data->REG_FAN_PULSES = NCT6775_REG_FAN_PULSES; data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME; data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME; data->REG_PWM[0] = NCT6775_REG_PWM; data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; data->REG_PWM[3] = NCT6775_REG_FAN_MAX_OUTPUT; data->REG_PWM[4] = NCT6775_REG_FAN_STEP_OUTPUT; data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP; data->REG_PWM_READ = NCT6775_REG_PWM_READ; data->REG_PWM_MODE = NCT6775_REG_PWM_MODE; data->PWM_MODE_MASK = NCT6775_PWM_MODE_MASK; data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; data->REG_CRITICAL_TEMP_TOLERANCE = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET; data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL; data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP; data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL; data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE; data->REG_ALARM = NCT6775_REG_ALARM; data->REG_BEEP = NCT6775_REG_BEEP; reg_temp = NCT6775_REG_TEMP; reg_temp_mon = NCT6775_REG_TEMP_MON; num_reg_temp = ARRAY_SIZE(NCT6775_REG_TEMP); num_reg_temp_mon = ARRAY_SIZE(NCT6775_REG_TEMP_MON); reg_temp_over = NCT6775_REG_TEMP_OVER; reg_temp_hyst = NCT6775_REG_TEMP_HYST; reg_temp_config = NCT6775_REG_TEMP_CONFIG; reg_temp_alternate = NCT6775_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6775_REG_TEMP_CRIT; break; case nct6776: data->in_num = 9; data->pwm_num = 3; data->auto_pwm_num = 4; data->has_fan_div = false; data->temp_fixed_num = 3; data->num_temp_alarms = 3; data->num_temp_beeps = 6; data->ALARM_BITS = NCT6776_ALARM_BITS; data->BEEP_BITS = NCT6776_BEEP_BITS; data->fan_from_reg = fan_from_reg13; data->fan_from_reg_min = fan_from_reg13; data->target_temp_mask = 0xff; data->tolerance_mask = 0x07; data->speed_tolerance_limit = 63; data->temp_label = nct6776_temp_label; data->temp_mask = NCT6776_TEMP_MASK; data->virt_temp_mask = NCT6776_VIRT_TEMP_MASK; data->REG_CONFIG = NCT6775_REG_CONFIG; data->REG_VBAT = NCT6775_REG_VBAT; data->REG_DIODE = NCT6775_REG_DIODE; data->DIODE_MASK = NCT6775_DIODE_MASK; data->REG_VIN = NCT6775_REG_IN; data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; data->REG_TARGET = NCT6775_REG_TARGET; data->REG_FAN = NCT6775_REG_FAN; data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; data->REG_FAN_PULSES = NCT6776_REG_FAN_PULSES; data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; data->REG_PWM[0] = NCT6775_REG_PWM; data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP; data->REG_PWM[6] = NCT6776_REG_WEIGHT_DUTY_BASE; data->REG_PWM_READ = NCT6775_REG_PWM_READ; data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; data->REG_CRITICAL_TEMP_TOLERANCE = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; data->REG_TEMP_OFFSET = NCT6775_REG_TEMP_OFFSET; data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL; data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP; data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL; data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE; data->REG_ALARM = NCT6775_REG_ALARM; data->REG_BEEP = NCT6776_REG_BEEP; reg_temp = NCT6775_REG_TEMP; reg_temp_mon = NCT6775_REG_TEMP_MON; num_reg_temp = ARRAY_SIZE(NCT6775_REG_TEMP); num_reg_temp_mon = ARRAY_SIZE(NCT6775_REG_TEMP_MON); reg_temp_over = NCT6775_REG_TEMP_OVER; reg_temp_hyst = NCT6775_REG_TEMP_HYST; reg_temp_config = NCT6776_REG_TEMP_CONFIG; reg_temp_alternate = NCT6776_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6776_REG_TEMP_CRIT; break; case nct6779: data->in_num = 15; data->pwm_num = 5; data->auto_pwm_num = 4; data->has_fan_div = false; data->temp_fixed_num = 6; data->num_temp_alarms = 2; data->num_temp_beeps = 2; data->ALARM_BITS = NCT6779_ALARM_BITS; data->BEEP_BITS = NCT6779_BEEP_BITS; data->fan_from_reg = fan_from_reg_rpm; data->fan_from_reg_min = fan_from_reg13; data->target_temp_mask = 0xff; data->tolerance_mask = 0x07; data->speed_tolerance_limit = 63; data->temp_label = nct6779_temp_label; data->temp_mask = NCT6779_TEMP_MASK; data->virt_temp_mask = NCT6779_VIRT_TEMP_MASK; data->REG_CONFIG = NCT6775_REG_CONFIG; data->REG_VBAT = NCT6775_REG_VBAT; data->REG_DIODE = NCT6775_REG_DIODE; data->DIODE_MASK = NCT6775_DIODE_MASK; data->REG_VIN = NCT6779_REG_IN; data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; data->REG_TARGET = NCT6775_REG_TARGET; data->REG_FAN = NCT6779_REG_FAN; data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES; data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; data->REG_PWM[0] = NCT6775_REG_PWM; data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP; data->REG_PWM[6] = NCT6776_REG_WEIGHT_DUTY_BASE; data->REG_PWM_READ = NCT6775_REG_PWM_READ; data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; data->REG_CRITICAL_TEMP_TOLERANCE = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; data->REG_CRITICAL_PWM_ENABLE = NCT6779_REG_CRITICAL_PWM_ENABLE; data->CRITICAL_PWM_ENABLE_MASK = NCT6779_CRITICAL_PWM_ENABLE_MASK; data->REG_CRITICAL_PWM = NCT6779_REG_CRITICAL_PWM; data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET; data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL; data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP; data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL; data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE; data->REG_ALARM = NCT6779_REG_ALARM; data->REG_BEEP = NCT6776_REG_BEEP; reg_temp = NCT6779_REG_TEMP; reg_temp_mon = NCT6779_REG_TEMP_MON; num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP); num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON); reg_temp_over = NCT6779_REG_TEMP_OVER; reg_temp_hyst = NCT6779_REG_TEMP_HYST; reg_temp_config = NCT6779_REG_TEMP_CONFIG; reg_temp_alternate = NCT6779_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6779_REG_TEMP_CRIT; break; case nct6791: case nct6792: case nct6793: case nct6795: case nct6796: case nct6797: case nct6798: data->in_num = 15; data->pwm_num = (data->kind == nct6796 || data->kind == nct6797 || data->kind == nct6798) ? 7 : 6; data->auto_pwm_num = 4; data->has_fan_div = false; data->temp_fixed_num = 6; data->num_temp_alarms = 2; data->num_temp_beeps = 2; data->ALARM_BITS = NCT6791_ALARM_BITS; data->BEEP_BITS = NCT6779_BEEP_BITS; data->fan_from_reg = fan_from_reg_rpm; data->fan_from_reg_min = fan_from_reg13; data->target_temp_mask = 0xff; data->tolerance_mask = 0x07; data->speed_tolerance_limit = 63; switch (data->kind) { default: case nct6791: data->temp_label = nct6779_temp_label; data->temp_mask = NCT6791_TEMP_MASK; data->virt_temp_mask = NCT6791_VIRT_TEMP_MASK; break; case nct6792: data->temp_label = nct6792_temp_label; data->temp_mask = NCT6792_TEMP_MASK; data->virt_temp_mask = NCT6792_VIRT_TEMP_MASK; break; case nct6793: data->temp_label = nct6793_temp_label; data->temp_mask = NCT6793_TEMP_MASK; data->virt_temp_mask = NCT6793_VIRT_TEMP_MASK; break; case nct6795: case nct6797: data->temp_label = nct6795_temp_label; data->temp_mask = NCT6795_TEMP_MASK; data->virt_temp_mask = NCT6795_VIRT_TEMP_MASK; break; case nct6796: data->temp_label = nct6796_temp_label; data->temp_mask = NCT6796_TEMP_MASK; data->virt_temp_mask = NCT6796_VIRT_TEMP_MASK; break; case nct6798: data->temp_label = nct6798_temp_label; data->temp_mask = NCT6798_TEMP_MASK; data->virt_temp_mask = NCT6798_VIRT_TEMP_MASK; break; } data->REG_CONFIG = NCT6775_REG_CONFIG; data->REG_VBAT = NCT6775_REG_VBAT; data->REG_DIODE = NCT6775_REG_DIODE; data->DIODE_MASK = NCT6775_DIODE_MASK; data->REG_VIN = NCT6779_REG_IN; data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; data->REG_TARGET = NCT6775_REG_TARGET; data->REG_FAN = NCT6779_REG_FAN; data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES; data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME; data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME; data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; data->REG_PWM[0] = NCT6775_REG_PWM; data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; data->REG_PWM[5] = NCT6791_REG_WEIGHT_DUTY_STEP; data->REG_PWM[6] = NCT6791_REG_WEIGHT_DUTY_BASE; data->REG_PWM_READ = NCT6775_REG_PWM_READ; data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; data->REG_CRITICAL_TEMP_TOLERANCE = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; data->REG_CRITICAL_PWM_ENABLE = NCT6779_REG_CRITICAL_PWM_ENABLE; data->CRITICAL_PWM_ENABLE_MASK = NCT6779_CRITICAL_PWM_ENABLE_MASK; data->REG_CRITICAL_PWM = NCT6779_REG_CRITICAL_PWM; data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET; data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; data->REG_WEIGHT_TEMP_SEL = NCT6791_REG_WEIGHT_TEMP_SEL; data->REG_WEIGHT_TEMP[0] = NCT6791_REG_WEIGHT_TEMP_STEP; data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL; data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE; data->REG_ALARM = NCT6791_REG_ALARM; if (data->kind == nct6791) data->REG_BEEP = NCT6776_REG_BEEP; else data->REG_BEEP = NCT6792_REG_BEEP; reg_temp = NCT6779_REG_TEMP; num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP); if (data->kind == nct6791) { reg_temp_mon = NCT6779_REG_TEMP_MON; num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON); } else { reg_temp_mon = NCT6792_REG_TEMP_MON; num_reg_temp_mon = ARRAY_SIZE(NCT6792_REG_TEMP_MON); } reg_temp_over = NCT6779_REG_TEMP_OVER; reg_temp_hyst = NCT6779_REG_TEMP_HYST; reg_temp_config = NCT6779_REG_TEMP_CONFIG; reg_temp_alternate = NCT6779_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6779_REG_TEMP_CRIT; break; default: return -ENODEV; } data->have_in = BIT(data->in_num) - 1; data->have_temp = 0; /* * On some boards, not all available temperature sources are monitored, * even though some of the monitoring registers are unused. * Get list of unused monitoring registers, then detect if any fan * controls are configured to use unmonitored temperature sources. * If so, assign the unmonitored temperature sources to available * monitoring registers. */ mask = 0; available = 0; for (i = 0; i < num_reg_temp; i++) { if (reg_temp[i] == 0) continue; src = data->read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f; if (!src || (mask & BIT(src))) available |= BIT(i); mask |= BIT(src); } /* * Now find unmonitored temperature registers and enable monitoring * if additional monitoring registers are available. */ add_temp_sensors(data, data->REG_TEMP_SEL, &available, &mask); add_temp_sensors(data, data->REG_WEIGHT_TEMP_SEL, &available, &mask); mask = 0; s = NUM_TEMP_FIXED; /* First dynamic temperature attribute */ for (i = 0; i < num_reg_temp; i++) { if (reg_temp[i] == 0) continue; src = data->read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f; if (!src || (mask & BIT(src))) continue; if (!(data->temp_mask & BIT(src))) { dev_info(dev, "Invalid temperature source %d at index %d, source register 0x%x, temp register 0x%x\n", src, i, data->REG_TEMP_SOURCE[i], reg_temp[i]); continue; } mask |= BIT(src); /* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */ if (src <= data->temp_fixed_num) { data->have_temp |= BIT(src - 1); data->have_temp_fixed |= BIT(src - 1); data->reg_temp[0][src - 1] = reg_temp[i]; data->reg_temp[1][src - 1] = reg_temp_over[i]; data->reg_temp[2][src - 1] = reg_temp_hyst[i]; if (reg_temp_crit_h && reg_temp_crit_h[i]) data->reg_temp[3][src - 1] = reg_temp_crit_h[i]; else if (reg_temp_crit[src - 1]) data->reg_temp[3][src - 1] = reg_temp_crit[src - 1]; if (reg_temp_crit_l && reg_temp_crit_l[i]) data->reg_temp[4][src - 1] = reg_temp_crit_l[i]; data->reg_temp_config[src - 1] = reg_temp_config[i]; data->temp_src[src - 1] = src; continue; } if (s >= NUM_TEMP) continue; /* Use dynamic index for other sources */ data->have_temp |= BIT(s); data->reg_temp[0][s] = reg_temp[i]; data->reg_temp[1][s] = reg_temp_over[i]; data->reg_temp[2][s] = reg_temp_hyst[i]; data->reg_temp_config[s] = reg_temp_config[i]; if (reg_temp_crit_h && reg_temp_crit_h[i]) data->reg_temp[3][s] = reg_temp_crit_h[i]; else if (reg_temp_crit[src - 1]) data->reg_temp[3][s] = reg_temp_crit[src - 1]; if (reg_temp_crit_l && reg_temp_crit_l[i]) data->reg_temp[4][s] = reg_temp_crit_l[i]; data->temp_src[s] = src; s++; } /* * Repeat with temperatures used for fan control. * This set of registers does not support limits. */ for (i = 0; i < num_reg_temp_mon; i++) { if (reg_temp_mon[i] == 0) continue; src = data->read_value(data, data->REG_TEMP_SEL[i]) & 0x1f; if (!src) continue; if (!(data->temp_mask & BIT(src))) { dev_info(dev, "Invalid temperature source %d at index %d, source register 0x%x, temp register 0x%x\n", src, i, data->REG_TEMP_SEL[i], reg_temp_mon[i]); continue; } /* * For virtual temperature sources, the 'virtual' temperature * for each fan reflects a different temperature, and there * are no duplicates. */ if (!(data->virt_temp_mask & BIT(src))) { if (mask & BIT(src)) continue; mask |= BIT(src); } /* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */ if (src <= data->temp_fixed_num) { if (data->have_temp & BIT(src - 1)) continue; data->have_temp |= BIT(src - 1); data->have_temp_fixed |= BIT(src - 1); data->reg_temp[0][src - 1] = reg_temp_mon[i]; data->temp_src[src - 1] = src; continue; } if (s >= NUM_TEMP) continue; /* Use dynamic index for other sources */ data->have_temp |= BIT(s); data->reg_temp[0][s] = reg_temp_mon[i]; data->temp_src[s] = src; s++; } #ifdef USE_ALTERNATE /* * Go through the list of alternate temp registers and enable * if possible. * The temperature is already monitored if the respective bit in * is set. */ for (i = 0; i < 31; i++) { if (!(data->temp_mask & BIT(i + 1))) continue; if (!reg_temp_alternate[i]) continue; if (mask & BIT(i + 1)) continue; if (i < data->temp_fixed_num) { if (data->have_temp & BIT(i)) continue; data->have_temp |= BIT(i); data->have_temp_fixed |= BIT(i); data->reg_temp[0][i] = reg_temp_alternate[i]; if (i < num_reg_temp) { data->reg_temp[1][i] = reg_temp_over[i]; data->reg_temp[2][i] = reg_temp_hyst[i]; } data->temp_src[i] = i + 1; continue; } if (s >= NUM_TEMP) /* Abort if no more space */ break; data->have_temp |= BIT(s); data->reg_temp[0][s] = reg_temp_alternate[i]; data->temp_src[s] = i + 1; s++; } #endif /* USE_ALTERNATE */ /* Initialize the chip */ nct6775_init_device(data); err = sio_data->sio_enter(sio_data); if (err) return err; cr2a = sio_data->sio_inb(sio_data, 0x2a); switch (data->kind) { case nct6775: data->have_vid = (cr2a & 0x40); break; case nct6776: data->have_vid = (cr2a & 0x60) == 0x40; break; case nct6106: case nct6116: case nct6779: case nct6791: case nct6792: case nct6793: case nct6795: case nct6796: case nct6797: case nct6798: break; } /* * Read VID value * We can get the VID input values directly at logical device D 0xe3. */ if (data->have_vid) { sio_data->sio_select(sio_data, NCT6775_LD_VID); data->vid = sio_data->sio_inb(sio_data, 0xe3); data->vrm = vid_which_vrm(); } if (fan_debounce) { u8 tmp; sio_data->sio_select(sio_data, NCT6775_LD_HWM); tmp = sio_data->sio_inb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE); switch (data->kind) { case nct6106: case nct6116: tmp |= 0xe0; break; case nct6775: tmp |= 0x1e; break; case nct6776: case nct6779: tmp |= 0x3e; break; case nct6791: case nct6792: case nct6793: case nct6795: case nct6796: case nct6797: case nct6798: tmp |= 0x7e; break; } sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE, tmp); dev_info(&pdev->dev, "Enabled fan debounce for chip %s\n", data->name); } nct6775_check_fan_inputs(data, sio_data); sio_data->sio_exit(sio_data); /* Read fan clock dividers immediately */ nct6775_init_fan_common(dev, data); /* Register sysfs hooks */ group = nct6775_create_attr_group(dev, &nct6775_pwm_template_group, data->pwm_num); if (IS_ERR(group)) return PTR_ERR(group); data->groups[num_attr_groups++] = group; group = nct6775_create_attr_group(dev, &nct6775_in_template_group, fls(data->have_in)); if (IS_ERR(group)) return PTR_ERR(group); data->groups[num_attr_groups++] = group; group = nct6775_create_attr_group(dev, &nct6775_fan_template_group, fls(data->has_fan)); if (IS_ERR(group)) return PTR_ERR(group); data->groups[num_attr_groups++] = group; group = nct6775_create_attr_group(dev, &nct6775_temp_template_group, fls(data->have_temp)); if (IS_ERR(group)) return PTR_ERR(group); data->groups[num_attr_groups++] = group; data->groups[num_attr_groups++] = &nct6775_group_other; hwmon_dev = devm_hwmon_device_register_with_groups(dev, data->name, data, data->groups); return PTR_ERR_OR_ZERO(hwmon_dev); } static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data) { int val; val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE); if (val & 0x10) { pr_info("Enabling hardware monitor logical device mappings.\n"); sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE, val & ~0x10); } } static int __maybe_unused nct6775_suspend(struct device *dev) { struct nct6775_data *data = nct6775_update_device(dev); mutex_lock(&data->update_lock); data->vbat = data->read_value(data, data->REG_VBAT); if (data->kind == nct6775) { data->fandiv1 = data->read_value(data, NCT6775_REG_FANDIV1); data->fandiv2 = data->read_value(data, NCT6775_REG_FANDIV2); } mutex_unlock(&data->update_lock); return 0; } static int __maybe_unused nct6775_resume(struct device *dev) { struct nct6775_data *data = dev_get_drvdata(dev); struct nct6775_sio_data *sio_data = dev_get_platdata(dev); int i, j, err = 0; u8 reg; mutex_lock(&data->update_lock); data->bank = 0xff; /* Force initial bank selection */ err = sio_data->sio_enter(sio_data); if (err) goto abort; sio_data->sio_select(sio_data, NCT6775_LD_HWM); reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); if (reg != data->sio_reg_enable) sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable); if (data->kind == nct6791 || data->kind == nct6792 || data->kind == nct6793 || data->kind == nct6795 || data->kind == nct6796 || data->kind == nct6797 || data->kind == nct6798) nct6791_enable_io_mapping(sio_data); sio_data->sio_exit(sio_data); /* Restore limits */ for (i = 0; i < data->in_num; i++) { if (!(data->have_in & BIT(i))) continue; data->write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]); data->write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]); } for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { if (!(data->has_fan_min & BIT(i))) continue; data->write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]); } for (i = 0; i < NUM_TEMP; i++) { if (!(data->have_temp & BIT(i))) continue; for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++) if (data->reg_temp[j][i]) nct6775_write_temp(data, data->reg_temp[j][i], data->temp[j][i]); } /* Restore other settings */ data->write_value(data, data->REG_VBAT, data->vbat); if (data->kind == nct6775) { data->write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); data->write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); } abort: /* Force re-reading all values */ data->valid = false; mutex_unlock(&data->update_lock); return err; } static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume); static struct platform_driver nct6775_driver = { .driver = { .name = DRVNAME, .pm = &nct6775_dev_pm_ops, }, .probe = nct6775_probe, }; /* nct6775_find() looks for a '627 in the Super-I/O config space */ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) { u16 val; int err; int addr; sio_data->access = access_direct; sio_data->sioreg = sioaddr; err = sio_data->sio_enter(sio_data); if (err) return err; val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) | sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1); if (force_id && val != 0xffff) val = force_id; switch (val & SIO_ID_MASK) { case SIO_NCT6106_ID: sio_data->kind = nct6106; break; case SIO_NCT6116_ID: sio_data->kind = nct6116; break; case SIO_NCT6775_ID: sio_data->kind = nct6775; break; case SIO_NCT6776_ID: sio_data->kind = nct6776; break; case SIO_NCT6779_ID: sio_data->kind = nct6779; break; case SIO_NCT6791_ID: sio_data->kind = nct6791; break; case SIO_NCT6792_ID: sio_data->kind = nct6792; break; case SIO_NCT6793_ID: sio_data->kind = nct6793; break; case SIO_NCT6795_ID: sio_data->kind = nct6795; break; case SIO_NCT6796_ID: sio_data->kind = nct6796; break; case SIO_NCT6797_ID: sio_data->kind = nct6797; break; case SIO_NCT6798_ID: sio_data->kind = nct6798; break; default: if (val != 0xffff) pr_debug("unsupported chip ID: 0x%04x\n", val); sio_data->sio_exit(sio_data); return -ENODEV; } /* We have a known chip, find the HWM I/O address */ sio_data->sio_select(sio_data, NCT6775_LD_HWM); val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8) | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1); addr = val & IOREGION_ALIGNMENT; if (addr == 0) { pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); sio_data->sio_exit(sio_data); return -ENODEV; } /* Activate logical device if needed */ val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); if (!(val & 0x01)) { pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01); } if (sio_data->kind == nct6791 || sio_data->kind == nct6792 || sio_data->kind == nct6793 || sio_data->kind == nct6795 || sio_data->kind == nct6796 || sio_data->kind == nct6797 || sio_data->kind == nct6798) nct6791_enable_io_mapping(sio_data); sio_data->sio_exit(sio_data); pr_info("Found %s or compatible chip at %#x:%#x\n", nct6775_sio_names[sio_data->kind], sioaddr, addr); return addr; } /* * when Super-I/O functions move to a separate file, the Super-I/O * bus will manage the lifetime of the device and this module will only keep * track of the nct6775 driver. But since we use platform_device_alloc(), we * must keep track of the device */ static struct platform_device *pdev[2]; static const char * const asus_wmi_boards[] = { "Pro WS X570-ACE", "PRIME B360-PLUS", "PRIME B460-PLUS", "PRIME X570-PRO", "ROG CROSSHAIR VIII DARK HERO", "ROG CROSSHAIR VIII FORMULA", "ROG CROSSHAIR VIII HERO", "ROG CROSSHAIR VIII IMPACT", "ROG STRIX B550-E GAMING", "ROG STRIX B550-F GAMING", "ROG STRIX B550-F GAMING (WI-FI)", "ROG STRIX B550-I GAMING", "ROG STRIX X570-F GAMING", "ROG STRIX Z390-E GAMING", "ROG STRIX Z490-I GAMING", "TUF GAMING B550M-PLUS", "TUF GAMING B550M-PLUS (WI-FI)", "TUF GAMING B550-PLUS", "TUF GAMING B550-PRO", "TUF GAMING X570-PLUS", "TUF GAMING X570-PLUS (WI-FI)", "TUF GAMING X570-PRO (WI-FI)", "TUF GAMING Z490-PLUS", "TUF GAMING Z490-PLUS (WI-FI)", }; static int __init sensors_nct6775_init(void) { int i, err; bool found = false; int address; struct resource res; struct nct6775_sio_data sio_data; int sioaddr[2] = { 0x2e, 0x4e }; enum sensor_access access = access_direct; const char *board_vendor, *board_name; u8 tmp; err = platform_driver_register(&nct6775_driver); if (err) return err; board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); board_name = dmi_get_system_info(DMI_BOARD_NAME); if (board_name && board_vendor && !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) { err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards), board_name); if (err >= 0) { /* if reading chip id via WMI succeeds, use WMI */ if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp)) { pr_info("Using Asus WMI to access %#x chip.\n", tmp); access = access_asuswmi; } else { pr_err("Can't read ChipID by Asus WMI.\n"); } } } /* * initialize sio_data->kind and sio_data->sioreg. * * when Super-I/O functions move to a separate file, the Super-I/O * driver will probe 0x2e and 0x4e and auto-detect the presence of a * nct6775 hardware monitor, and call probe() */ for (i = 0; i < ARRAY_SIZE(pdev); i++) { sio_data.sio_outb = superio_outb; sio_data.sio_inb = superio_inb; sio_data.sio_select = superio_select; sio_data.sio_enter = superio_enter; sio_data.sio_exit = superio_exit; address = nct6775_find(sioaddr[i], &sio_data); if (address <= 0) continue; found = true; sio_data.access = access; if (access == access_asuswmi) { sio_data.sio_outb = superio_wmi_outb; sio_data.sio_inb = superio_wmi_inb; sio_data.sio_select = superio_wmi_select; sio_data.sio_enter = superio_wmi_enter; sio_data.sio_exit = superio_wmi_exit; } pdev[i] = platform_device_alloc(DRVNAME, address); if (!pdev[i]) { err = -ENOMEM; goto exit_device_unregister; } err = platform_device_add_data(pdev[i], &sio_data, sizeof(struct nct6775_sio_data)); if (err) goto exit_device_put; if (sio_data.access == access_direct) { memset(&res, 0, sizeof(res)); res.name = DRVNAME; res.start = address + IOREGION_OFFSET; res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; res.flags = IORESOURCE_IO; err = acpi_check_resource_conflict(&res); if (err) { platform_device_put(pdev[i]); pdev[i] = NULL; continue; } err = platform_device_add_resources(pdev[i], &res, 1); if (err) goto exit_device_put; } /* platform_device_add calls probe() */ err = platform_device_add(pdev[i]); if (err) goto exit_device_put; } if (!found) { err = -ENODEV; goto exit_unregister; } return 0; exit_device_put: platform_device_put(pdev[i]); exit_device_unregister: while (--i >= 0) { if (pdev[i]) platform_device_unregister(pdev[i]); } exit_unregister: platform_driver_unregister(&nct6775_driver); return err; } static void __exit sensors_nct6775_exit(void) { int i; for (i = 0; i < ARRAY_SIZE(pdev); i++) { if (pdev[i]) platform_device_unregister(pdev[i]); } platform_driver_unregister(&nct6775_driver); } MODULE_AUTHOR("Guenter Roeck "); MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips"); MODULE_LICENSE("GPL"); module_init(sensors_nct6775_init); module_exit(sensors_nct6775_exit);