menuconfig CRYPTO_HW bool "Hardware crypto devices" default y ---help--- Say Y here to get to see options for hardware crypto devices and processors. This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. if CRYPTO_HW config CRYPTO_DEV_PADLOCK tristate "Support for VIA PadLock ACE" depends on X86 && !UML help Some VIA processors come with an integrated crypto engine (so called VIA PadLock ACE, Advanced Cryptography Engine) that provides instructions for very fast cryptographic operations with supported algorithms. The instructions are used only when the CPU supports them. Otherwise software encryption is used. config CRYPTO_DEV_PADLOCK_AES tristate "PadLock driver for AES algorithm" depends on CRYPTO_DEV_PADLOCK select CRYPTO_BLKCIPHER select CRYPTO_AES help Use VIA PadLock for AES algorithm. Available in VIA C3 and newer CPUs. If unsure say M. The compiled module will be called padlock-aes. config CRYPTO_DEV_PADLOCK_SHA tristate "PadLock driver for SHA1 and SHA256 algorithms" depends on CRYPTO_DEV_PADLOCK select CRYPTO_HASH select CRYPTO_SHA1 select CRYPTO_SHA256 help Use VIA PadLock for SHA1/SHA256 algorithms. Available in VIA C7 and newer processors. If unsure say M. The compiled module will be called padlock-sha. config CRYPTO_DEV_GEODE tristate "Support for the Geode LX AES engine" depends on X86_32 && PCI select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help Say 'Y' here to use the AMD Geode LX processor on-board AES engine for the CryptoAPI AES algorithm. To compile this driver as a module, choose M here: the module will be called geode-aes. config ZCRYPT tristate "Support for PCI-attached cryptographic adapters" depends on S390 select HW_RANDOM help Select this option if you want to use a PCI-attached cryptographic adapter like: + PCI Cryptographic Accelerator (PCICA) + PCI Cryptographic Coprocessor (PCICC) + PCI-X Cryptographic Coprocessor (PCIXCC) + Crypto Express2 Coprocessor (CEX2C) + Crypto Express2 Accelerator (CEX2A) + Crypto Express3 Coprocessor (CEX3C) + Crypto Express3 Accelerator (CEX3A) config CRYPTO_SHA1_S390 tristate "SHA1 digest algorithm" depends on S390 select CRYPTO_HASH help This is the s390 hardware accelerated implementation of the SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). It is available as of z990. config CRYPTO_SHA256_S390 tristate "SHA256 digest algorithm" depends on S390 select CRYPTO_HASH help This is the s390 hardware accelerated implementation of the SHA256 secure hash standard (DFIPS 180-2). It is available as of z9. config CRYPTO_SHA512_S390 tristate "SHA384 and SHA512 digest algorithm" depends on S390 select CRYPTO_HASH help This is the s390 hardware accelerated implementation of the SHA512 secure hash standard. It is available as of z10. config CRYPTO_DES_S390 tristate "DES and Triple DES cipher algorithms" depends on S390 select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER select CRYPTO_DES help This is the s390 hardware accelerated implementation of the DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). As of z990 the ECB and CBC mode are hardware accelerated. As of z196 the CTR mode is hardware accelerated. config CRYPTO_AES_S390 tristate "AES cipher algorithms" depends on S390 select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help This is the s390 hardware accelerated implementation of the AES cipher algorithms (FIPS-197). As of z9 the ECB and CBC modes are hardware accelerated for 128 bit keys. As of z10 the ECB and CBC modes are hardware accelerated for all AES key sizes. As of z196 the CTR mode is hardware accelerated for all AES key sizes and XTS mode is hardware accelerated for 256 and 512 bit keys. config S390_PRNG tristate "Pseudo random number generator device driver" depends on S390 default "m" help Select this option if you want to use the s390 pseudo random number generator. The PRNG is part of the cryptographic processor functions and uses triple-DES to generate secure random numbers like the ANSI X9.17 standard. User-space programs access the pseudo-random-number device through the char device /dev/prandom. It is available as of z9. config CRYPTO_GHASH_S390 tristate "GHASH digest algorithm" depends on S390 select CRYPTO_HASH help This is the s390 hardware accelerated implementation of the GHASH message digest algorithm for GCM (Galois/Counter Mode). It is available as of z196. config CRYPTO_DEV_MV_CESA tristate "Marvell's Cryptographic Engine" depends on PLAT_ORION select CRYPTO_ALGAPI select CRYPTO_AES select CRYPTO_BLKCIPHER2 select CRYPTO_HASH help This driver allows you to utilize the Cryptographic Engines and Security Accelerator (CESA) which can be found on the Marvell Orion and Kirkwood SoCs, such as QNAP's TS-209. Currently the driver supports AES in ECB and CBC mode without DMA. config CRYPTO_DEV_NIAGARA2 tristate "Niagara2 Stream Processing Unit driver" select CRYPTO_DES select CRYPTO_ALGAPI depends on SPARC64 help Each core of a Niagara2 processor contains a Stream Processing Unit, which itself contains several cryptographic sub-units. One set provides the Modular Arithmetic Unit, used for SSL offload. The other set provides the Cipher Group, which can perform encryption, decryption, hashing, checksumming, and raw copies. config CRYPTO_DEV_HIFN_795X tristate "Driver HIFN 795x crypto accelerator chips" select CRYPTO_DES select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG depends on PCI depends on !ARCH_DMA_ADDR_T_64BIT help This option allows you to have support for HIFN 795x crypto adapters. config CRYPTO_DEV_HIFN_795X_RNG bool "HIFN 795x random number generator" depends on CRYPTO_DEV_HIFN_795X help Select this option if you want to enable the random number generator on the HIFN 795x crypto adapters. source drivers/crypto/caam/Kconfig config CRYPTO_DEV_TALITOS tristate "Talitos Freescale Security Engine (SEC)" select CRYPTO_ALGAPI select CRYPTO_AUTHENC select HW_RANDOM depends on FSL_SOC help Say 'Y' here to use the Freescale Security Engine (SEC) to offload cryptographic algorithm computation. The Freescale SEC is present on PowerQUICC 'E' processors, such as the MPC8349E and MPC8548E. To compile this driver as a module, choose M here: the module will be called talitos. config CRYPTO_DEV_IXP4XX tristate "Driver for IXP4xx crypto hardware acceleration" depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE select CRYPTO_DES select CRYPTO_ALGAPI select CRYPTO_AUTHENC select CRYPTO_BLKCIPHER help Driver for the IXP4xx NPE crypto engine. config CRYPTO_DEV_PPC4XX tristate "Driver AMCC PPC4xx crypto accelerator" depends on PPC && 4xx select CRYPTO_HASH select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help This option allows you to have support for AMCC crypto acceleration. config CRYPTO_DEV_OMAP_SHAM tristate "Support for OMAP MD5/SHA1/SHA2 hw accelerator" depends on ARCH_OMAP2PLUS select CRYPTO_SHA1 select CRYPTO_MD5 select CRYPTO_SHA256 select CRYPTO_SHA512 select CRYPTO_HMAC help OMAP processors have MD5/SHA1/SHA2 hw accelerator. Select this if you want to use the OMAP module for MD5/SHA1/SHA2 algorithms. config CRYPTO_DEV_OMAP_AES tristate "Support for OMAP AES hw engine" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP2PLUS select CRYPTO_AES select CRYPTO_BLKCIPHER2 help OMAP processors have AES module accelerator. Select this if you want to use the OMAP module for AES algorithms. config CRYPTO_DEV_OMAP_DES tristate "Support for OMAP DES3DES hw engine" depends on ARCH_OMAP2PLUS select CRYPTO_DES select CRYPTO_BLKCIPHER2 help OMAP processors have DES/3DES module accelerator. Select this if you want to use the OMAP module for DES and 3DES algorithms. Currently the ECB and CBC modes of operation supported by the driver. Also accesses made on unaligned boundaries are also supported. config CRYPTO_DEV_PICOXCELL tristate "Support for picoXcell IPSEC and Layer2 crypto engines" depends on ARCH_PICOXCELL && HAVE_CLK select CRYPTO_AES select CRYPTO_AUTHENC select CRYPTO_ALGAPI select CRYPTO_DES select CRYPTO_CBC select CRYPTO_ECB select CRYPTO_SEQIV help This option enables support for the hardware offload engines in the Picochip picoXcell SoC devices. Select this for IPSEC ESP offload and for 3gpp Layer 2 ciphering support. Saying m here will build a module named pipcoxcell_crypto. config CRYPTO_DEV_SAHARA tristate "Support for SAHARA crypto accelerator" depends on ARCH_MXC && OF select CRYPTO_BLKCIPHER select CRYPTO_AES select CRYPTO_ECB help This option enables support for the SAHARA HW crypto accelerator found in some Freescale i.MX chips. config CRYPTO_DEV_S5P tristate "Support for Samsung S5PV210/Exynos crypto accelerator" depends on ARCH_S5PV210 || ARCH_EXYNOS select CRYPTO_AES select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help This option allows you to have support for S5P crypto acceleration. Select this to offload Samsung S5PV210 or S5PC110, Exynos from AES algorithms execution. config CRYPTO_DEV_NX bool "Support for IBM Power7+ in-Nest cryptographic acceleration" depends on PPC64 && IBMVIO && !CPU_LITTLE_ENDIAN default n help Support for Power7+ in-Nest cryptographic acceleration. if CRYPTO_DEV_NX source "drivers/crypto/nx/Kconfig" endif config CRYPTO_DEV_UX500 tristate "Driver for ST-Ericsson UX500 crypto hardware acceleration" depends on ARCH_U8500 select CRYPTO_ALGAPI help Driver for ST-Ericsson UX500 crypto engine. if CRYPTO_DEV_UX500 source "drivers/crypto/ux500/Kconfig" endif # if CRYPTO_DEV_UX500 config CRYPTO_DEV_BFIN_CRC tristate "Support for Blackfin CRC hardware" depends on BF60x help Newer Blackfin processors have CRC hardware. Select this if you want to use the Blackfin CRC module. config CRYPTO_DEV_ATMEL_AES tristate "Support for Atmel AES hw accelerator" depends on ARCH_AT91 select CRYPTO_CBC select CRYPTO_ECB select CRYPTO_AES select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER select AT_HDMAC help Some Atmel processors have AES hw accelerator. Select this if you want to use the Atmel module for AES algorithms. To compile this driver as a module, choose M here: the module will be called atmel-aes. config CRYPTO_DEV_ATMEL_TDES tristate "Support for Atmel DES/TDES hw accelerator" depends on ARCH_AT91 select CRYPTO_DES select CRYPTO_CBC select CRYPTO_ECB select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help Some Atmel processors have DES/TDES hw accelerator. Select this if you want to use the Atmel module for DES/TDES algorithms. To compile this driver as a module, choose M here: the module will be called atmel-tdes. config CRYPTO_DEV_ATMEL_SHA tristate "Support for Atmel SHA hw accelerator" depends on ARCH_AT91 select CRYPTO_SHA1 select CRYPTO_SHA256 select CRYPTO_SHA512 select CRYPTO_ALGAPI help Some Atmel processors have SHA1/SHA224/SHA256/SHA384/SHA512 hw accelerator. Select this if you want to use the Atmel module for SHA1/SHA224/SHA256/SHA384/SHA512 algorithms. To compile this driver as a module, choose M here: the module will be called atmel-sha. config CRYPTO_DEV_CCP bool "Support for AMD Cryptographic Coprocessor" depends on (X86 && PCI) || ARM64 default n help The AMD Cryptographic Coprocessor provides hardware support for encryption, hashing and related operations. if CRYPTO_DEV_CCP source "drivers/crypto/ccp/Kconfig" endif config CRYPTO_DEV_MXS_DCP tristate "Support for Freescale MXS DCP" depends on ARCH_MXS select CRYPTO_SHA1 select CRYPTO_SHA256 select CRYPTO_CBC select CRYPTO_ECB select CRYPTO_AES select CRYPTO_BLKCIPHER select CRYPTO_ALGAPI help The Freescale i.MX23/i.MX28 has SHA1/SHA256 and AES128 CBC/ECB co-processor on the die. To compile this driver as a module, choose M here: the module will be called mxs-dcp. source "drivers/crypto/qat/Kconfig" config CRYPTO_DEV_QCE tristate "Qualcomm crypto engine accelerator" depends on ARCH_QCOM || COMPILE_TEST select CRYPTO_AES select CRYPTO_DES select CRYPTO_ECB select CRYPTO_CBC select CRYPTO_XTS select CRYPTO_CTR select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER help This driver supports Qualcomm crypto engine accelerator hardware. To compile this driver as a module, choose M here. The module will be called qcrypto. endif # CRYPTO_HW