/* * P1022DS board specific routines * * Authors: Travis Wheatley * Dave Liu * Timur Tabi * * Copyright 2010 Freescale Semiconductor, Inc. * * This file is taken from the Freescale P1022DS BSP, with modifications: * 2) No AMP support * 3) No PCI endpoint support * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ #include #include #include #include #include #include #include #include #include #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) /* * Board-specific initialization of the DIU. This code should probably be * executed when the DIU is opened, rather than in arch code, but the DIU * driver does not have a mechanism for this (yet). * * This is especially problematic on the P1022DS because the local bus (eLBC) * and the DIU video signals share the same pins, which means that enabling the * DIU will disable access to NOR flash. */ /* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */ #define CLKDVDR_PXCKEN 0x80000000 #define CLKDVDR_PXCKINV 0x10000000 #define CLKDVDR_PXCKDLY 0x06000000 #define CLKDVDR_PXCLK_MASK 0x00FF0000 /* Some ngPIXIS register definitions */ #define PX_BRDCFG1_DVIEN 0x80 #define PX_BRDCFG1_DFPEN 0x40 #define PX_BRDCFG1_BACKLIGHT 0x20 #define PX_BRDCFG1_DDCEN 0x10 /* * DIU Area Descriptor * * Note that we need to byte-swap the value before it's written to the AD * register. So even though the registers don't look like they're in the same * bit positions as they are on the MPC8610, the same value is written to the * AD register on the MPC8610 and on the P1022. */ #define AD_BYTE_F 0x10000000 #define AD_ALPHA_C_MASK 0x0E000000 #define AD_ALPHA_C_SHIFT 25 #define AD_BLUE_C_MASK 0x01800000 #define AD_BLUE_C_SHIFT 23 #define AD_GREEN_C_MASK 0x00600000 #define AD_GREEN_C_SHIFT 21 #define AD_RED_C_MASK 0x00180000 #define AD_RED_C_SHIFT 19 #define AD_PALETTE 0x00040000 #define AD_PIXEL_S_MASK 0x00030000 #define AD_PIXEL_S_SHIFT 16 #define AD_COMP_3_MASK 0x0000F000 #define AD_COMP_3_SHIFT 12 #define AD_COMP_2_MASK 0x00000F00 #define AD_COMP_2_SHIFT 8 #define AD_COMP_1_MASK 0x000000F0 #define AD_COMP_1_SHIFT 4 #define AD_COMP_0_MASK 0x0000000F #define AD_COMP_0_SHIFT 0 #define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \ cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \ (blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \ (red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \ (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) /** * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth * * The Area Descriptor is a 32-bit value that determine which bits in each * pixel are to be used for each color. */ static unsigned int p1022ds_get_pixel_format(unsigned int bits_per_pixel, int monitor_port) { switch (bits_per_pixel) { case 32: /* 0x88883316 */ return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); case 24: /* 0x88082219 */ return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); case 16: /* 0x65053118 */ return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); default: pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); return 0; } } /** * p1022ds_set_gamma_table: update the gamma table, if necessary * * On some boards, the gamma table for some ports may need to be modified. * This is not the case on the P1022DS, so we do nothing. */ static void p1022ds_set_gamma_table(int monitor_port, char *gamma_table_base) { } /** * p1022ds_set_monitor_port: switch the output to a different monitor port * */ static void p1022ds_set_monitor_port(int monitor_port) { struct device_node *pixis_node; void __iomem *pixis; u8 __iomem *brdcfg1; pixis_node = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); if (!pixis_node) { pr_err("p1022ds: missing ngPIXIS node\n"); return; } pixis = of_iomap(pixis_node, 0); if (!pixis) { pr_err("p1022ds: could not map ngPIXIS registers\n"); return; } brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */ switch (monitor_port) { case 0: /* DVI */ /* Enable the DVI port, disable the DFP and the backlight */ clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT, PX_BRDCFG1_DVIEN); break; case 1: /* Single link LVDS */ /* Enable the DFP port, disable the DVI and the backlight */ clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT, PX_BRDCFG1_DFPEN); break; default: pr_err("p1022ds: unsupported monitor port %i\n", monitor_port); } iounmap(pixis); } /** * p1022ds_set_pixel_clock: program the DIU's clock * * @pixclock: the wavelength, in picoseconds, of the clock */ void p1022ds_set_pixel_clock(unsigned int pixclock) { struct device_node *guts_np = NULL; struct ccsr_guts_85xx __iomem *guts; unsigned long freq; u64 temp; u32 pxclk; /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_np) { pr_err("p1022ds: missing global utilties device node\n"); return; } guts = of_iomap(guts_np, 0); of_node_put(guts_np); if (!guts) { pr_err("p1022ds: could not map global utilties device\n"); return; } /* Convert pixclock from a wavelength to a frequency */ temp = 1000000000000ULL; do_div(temp, pixclock); freq = temp; /* * 'pxclk' is the ratio of the platform clock to the pixel clock. * This number is programmed into the CLKDVDR register, and the valid * range of values is 2-255. */ pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq); pxclk = clamp_t(u32, pxclk, 2, 255); /* Disable the pixel clock, and set it to non-inverted and no delay */ clrbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK); /* Enable the clock and set the pxclk */ setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16)); iounmap(guts); } /** * p1022ds_show_monitor_port: show the current monitor * * This function returns a string indicating whether the current monitor is * set to DVI or LVDS. */ ssize_t p1022ds_show_monitor_port(int monitor_port, char *buf) { return sprintf(buf, "%c0 - DVI\n%c1 - Single link LVDS\n", monitor_port == 0 ? '*' : ' ', monitor_port == 1 ? '*' : ' '); } /** * p1022ds_set_sysfs_monitor_port: set the monitor port for sysfs */ int p1022ds_set_sysfs_monitor_port(int val) { return val < 2 ? val : 0; } #endif void __init p1022_ds_pic_init(void) { struct mpic *mpic; struct resource r; struct device_node *np; np = of_find_node_by_type(NULL, "open-pic"); if (!np) { pr_err("Could not find open-pic node\n"); return; } if (of_address_to_resource(np, 0, &r)) { pr_err("Failed to map mpic register space\n"); of_node_put(np); return; } mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); of_node_put(np); mpic_init(mpic); } #ifdef CONFIG_SMP void __init mpc85xx_smp_init(void); #endif /* * Setup the architecture */ static void __init p1022_ds_setup_arch(void) { #ifdef CONFIG_PCI struct device_node *np; #endif dma_addr_t max = 0xffffffff; if (ppc_md.progress) ppc_md.progress("p1022_ds_setup_arch()", 0); #ifdef CONFIG_PCI for_each_compatible_node(np, "pci", "fsl,p1022-pcie") { struct resource rsrc; struct pci_controller *hose; of_address_to_resource(np, 0, &rsrc); if ((rsrc.start & 0xfffff) == 0x8000) fsl_add_bridge(np, 1); else fsl_add_bridge(np, 0); hose = pci_find_hose_for_OF_device(np); max = min(max, hose->dma_window_base_cur + hose->dma_window_size); } #endif #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) diu_ops.get_pixel_format = p1022ds_get_pixel_format; diu_ops.set_gamma_table = p1022ds_set_gamma_table; diu_ops.set_monitor_port = p1022ds_set_monitor_port; diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; diu_ops.show_monitor_port = p1022ds_show_monitor_port; diu_ops.set_sysfs_monitor_port = p1022ds_set_sysfs_monitor_port; #endif #ifdef CONFIG_SMP mpc85xx_smp_init(); #endif #ifdef CONFIG_SWIOTLB if (memblock_end_of_DRAM() > max) { ppc_swiotlb_enable = 1; set_pci_dma_ops(&swiotlb_dma_ops); ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; } #endif pr_info("Freescale P1022 DS reference board\n"); } static struct of_device_id __initdata p1022_ds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .compatible = "simple-bus", }, { .compatible = "gianfar", }, /* So that the DMA channel nodes can be probed individually: */ { .compatible = "fsl,eloplus-dma", }, {}, }; static int __init p1022_ds_publish_devices(void) { return of_platform_bus_probe(NULL, p1022_ds_ids, NULL); } machine_device_initcall(p1022_ds, p1022_ds_publish_devices); machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier); /* * Called very early, device-tree isn't unflattened */ static int __init p1022_ds_probe(void) { unsigned long root = of_get_flat_dt_root(); return of_flat_dt_is_compatible(root, "fsl,p1022ds"); } define_machine(p1022_ds) { .name = "P1022 DS", .probe = p1022_ds_probe, .setup_arch = p1022_ds_setup_arch, .init_IRQ = p1022_ds_pic_init, #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif .get_irq = mpic_get_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, };