From 6168cda927ecdf3347537e0d01618ca2a2272007 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 5 Sep 2008 18:15:22 +0800 Subject: [ARM] pxa/corgi: use generic GPIO API for SCOOP GPIOs Original patch from Dmitry Baryshkov's inital scoop gpio conversion work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git. Signed-off-by: Dmitry Baryshkov Signed-off-by: Eric Miao Signed-off-by: Russell King --- sound/soc/pxa/corgi.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 0a53f72077fd..fa69faa886ef 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -18,13 +18,13 @@ #include #include #include +#include #include #include #include #include #include -#include #include #include #include @@ -54,8 +54,8 @@ static void corgi_ext_control(struct snd_soc_codec *codec) switch (corgi_jack_func) { case CORGI_HP: /* set = unmute headphone */ - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L); - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R); + gpio_set_value(CORGI_GPIO_MUTE_L, 1); + gpio_set_value(CORGI_GPIO_MUTE_R, 1); snd_soc_dapm_disable_pin(codec, "Mic Jack"); snd_soc_dapm_disable_pin(codec, "Line Jack"); snd_soc_dapm_enable_pin(codec, "Headphone Jack"); @@ -63,24 +63,24 @@ static void corgi_ext_control(struct snd_soc_codec *codec) break; case CORGI_MIC: /* reset = mute headphone */ - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L); - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R); + gpio_set_value(CORGI_GPIO_MUTE_L, 0); + gpio_set_value(CORGI_GPIO_MUTE_R, 0); snd_soc_dapm_enable_pin(codec, "Mic Jack"); snd_soc_dapm_disable_pin(codec, "Line Jack"); snd_soc_dapm_disable_pin(codec, "Headphone Jack"); snd_soc_dapm_disable_pin(codec, "Headset Jack"); break; case CORGI_LINE: - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L); - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R); + gpio_set_value(CORGI_GPIO_MUTE_L, 0); + gpio_set_value(CORGI_GPIO_MUTE_R, 0); snd_soc_dapm_disable_pin(codec, "Mic Jack"); snd_soc_dapm_enable_pin(codec, "Line Jack"); snd_soc_dapm_disable_pin(codec, "Headphone Jack"); snd_soc_dapm_disable_pin(codec, "Headset Jack"); break; case CORGI_HEADSET: - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L); - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R); + gpio_set_value(CORGI_GPIO_MUTE_L, 0); + gpio_set_value(CORGI_GPIO_MUTE_R, 1); snd_soc_dapm_enable_pin(codec, "Mic Jack"); snd_soc_dapm_disable_pin(codec, "Line Jack"); snd_soc_dapm_disable_pin(codec, "Headphone Jack"); @@ -114,8 +114,8 @@ static int corgi_shutdown(struct snd_pcm_substream *substream) struct snd_soc_codec *codec = rtd->socdev->codec; /* set = unmute headphone */ - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_L); - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MUTE_R); + gpio_set_value(CORGI_GPIO_MUTE_L, 1); + gpio_set_value(CORGI_GPIO_MUTE_R, 1); return 0; } @@ -218,22 +218,14 @@ static int corgi_set_spk(struct snd_kcontrol *kcontrol, static int corgi_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - if (SND_SOC_DAPM_EVENT_ON(event)) - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON); - else - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON); - + gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event)); return 0; } static int corgi_mic_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - if (SND_SOC_DAPM_EVENT_ON(event)) - set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS); - else - reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS); - + gpio_set_value(CORGI_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event)); return 0; } -- cgit v1.2.3 From fff147208b48680cb7b627a144113a6585828a0e Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 5 Sep 2008 22:15:23 +0800 Subject: [ARM] pxa/spitz: use generic GPIO API for SCOOP1/SCOOP2 GPIOs Original patch from Dmitry Baryshkov's inital scoop gpio conversion work at http://git.infradead.org/users/dbaryshkov/zaurus-2.6.git. Signed-off-by: Dmitry Baryshkov Signed-off-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/include/mach/spitz.h | 22 ++++++++++++ arch/arm/mach-pxa/spitz.c | 66 +++++++++++++++++++++------------- arch/arm/mach-pxa/spitz_pm.c | 28 +++++---------- sound/soc/pxa/spitz.c | 33 ++++++++--------- 4 files changed, 87 insertions(+), 62 deletions(-) (limited to 'sound/soc') diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index d2fc22df0d7f..e9b3d33daed6 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -16,6 +16,7 @@ #endif #include +#include /* Spitz/Akita GPIOs */ @@ -107,6 +108,17 @@ #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) #define SPITZ_SCP_SUS_SET 0 +#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO) +#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0) +#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1) +#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2) +#define SPITZ_GPIO_MUTE_L (SPITZ_SCP_GPIO_BASE + 3) +#define SPITZ_GPIO_MUTE_R (SPITZ_SCP_GPIO_BASE + 4) +#define SPITZ_GPIO_CF_POWER (SPITZ_SCP_GPIO_BASE + 5) +#define SPITZ_GPIO_LED_ORANGE (SPITZ_SCP_GPIO_BASE + 6) +#define SPITZ_GPIO_JK_A (SPITZ_SCP_GPIO_BASE + 7) +#define SPITZ_GPIO_ADC_TEMP_ON (SPITZ_SCP_GPIO_BASE + 8) + /* Spitz Scoop Device (No. 2) GPIOs */ /* Suspend States in comments */ #define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ @@ -128,6 +140,16 @@ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) +#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0) +#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1 +#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2) +#define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3) +#define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4) +#define SPITZ_GPIO_RESERVED_4 (SPITZ_SCP2_GPIO_BASE + 5) +#define SPITZ_GPIO_BACKLIGHT_CONT (SPITZ_SCP2_GPIO_BASE + 6) +#define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7) +#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8) /* Spitz IRQ Definitions */ diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 8b06b7a749df..290008296e1b 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -134,10 +134,11 @@ static struct resource spitz_scoop_resources[] = { }; static struct scoop_config spitz_scoop_setup = { - .io_dir = SPITZ_SCP_IO_DIR, + .io_dir = SPITZ_SCP_IO_DIR, .io_out = SPITZ_SCP_IO_OUT, - .suspend_clr = SPITZ_SCP_SUS_CLR, - .suspend_set = SPITZ_SCP_SUS_SET, + .suspend_clr = SPITZ_SCP_SUS_CLR, + .suspend_set = SPITZ_SCP_SUS_SET, + .gpio_base = SPITZ_SCP_GPIO_BASE, }; struct platform_device spitzscoop_device = { @@ -162,10 +163,11 @@ static struct resource spitz_scoop2_resources[] = { }; static struct scoop_config spitz_scoop2_setup = { - .io_dir = SPITZ_SCP2_IO_DIR, + .io_dir = SPITZ_SCP2_IO_DIR, .io_out = SPITZ_SCP2_IO_OUT, - .suspend_clr = SPITZ_SCP2_SUS_CLR, - .suspend_set = SPITZ_SCP2_SUS_SET, + .suspend_clr = SPITZ_SCP2_SUS_CLR, + .suspend_set = SPITZ_SCP2_SUS_SET, + .gpio_base = SPITZ_SCP2_GPIO_BASE, }; struct platform_device spitzscoop2_device = { @@ -187,7 +189,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR); if (new_cpr & 0x0007) { - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + gpio_set_value(SPITZ_GPIO_CF_POWER, 1); if (!(cpr & 0x0002) && !(cpr & 0x0004)) mdelay(5); if (device == SPITZ_PWR_CF) @@ -203,7 +205,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr) if (!(cpr & 0x0002) && !(cpr & 0x0004)) { write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000); mdelay(1); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER); + gpio_set_value(SPITZ_GPIO_CF_POWER, 0); } else { write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr); } @@ -283,16 +285,8 @@ static struct pxa2xx_spi_chip spitz_ads7846_chip = { static void spitz_notify_intensity(int intensity) { if (machine_is_spitz() || machine_is_borzoi()) { - /* Bit 5 is via SCOOP */ - if (intensity & 0x0020) - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - else - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT); - - if (intensity) - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); - else - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON); + gpio_set_value(SPITZ_GPIO_BACKLIGHT_CONT, !(intensity & 0x20)); + gpio_set_value(SPITZ_GPIO_BACKLIGHT_ON, intensity); return; } @@ -515,12 +509,34 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = { /* * Irda */ +static int spitz_irda_startup(struct device *dev) +{ + int rc; + + rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on"); + if (rc) + goto err; + + rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1); + if (rc) + goto err_dir; + + return 0; + +err_dir: + gpio_free(SPITZ_GPIO_IR_ON); +err: + return rc; +} + +static void spitz_irda_shutdown(struct device *dev) +{ + gpio_free(SPITZ_GPIO_IR_ON); +} + static void spitz_irda_transceiver_mode(struct device *dev, int mode) { - if (mode & IR_OFF) - set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); - else - reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON); + gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF); pxa2xx_transceiver_mode(dev, mode); } @@ -536,8 +552,10 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode) #endif static struct pxaficp_platform_data spitz_ficp_platform_data = { - .transceiver_cap = IR_SIRMODE | IR_OFF, - .transceiver_mode = spitz_irda_transceiver_mode, + .transceiver_cap = IR_SIRMODE | IR_OFF, + .transceiver_mode = spitz_irda_transceiver_mode, + .startup = spitz_irda_startup, + .shutdown = spitz_irda_shutdown, }; diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 8a40505dfd28..53018db106ac 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include @@ -48,44 +47,35 @@ static void spitz_charger_init(void) static void spitz_measure_temp(int on) { - if (on) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON); + gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on); } static void spitz_charge(int on) { if (on) { if (sharpsl_pm.flags & SHARPSL_SUSPENDED) { - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + gpio_set_value(SPITZ_GPIO_JK_B, 1); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 0); } else { - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + gpio_set_value(SPITZ_GPIO_JK_B, 0); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 0); } } else { - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B); - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON); + gpio_set_value(SPITZ_GPIO_JK_B, 0); + gpio_set_value(SPITZ_GPIO_CHRG_ON, 1); } } static void spitz_discharge(int on) { - if (on) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A); + gpio_set_value(SPITZ_GPIO_JK_A, on); } /* HACK - For unknown reasons, accurate voltage readings are only made with a load on the power bus which the green led on spitz provides */ static void spitz_discharge1(int on) { - if (on) - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); - else - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN); + gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } static void spitz_presuspend(void) diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index 37cb768fc933..acfa712844e2 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -19,13 +19,13 @@ #include #include #include +#include #include #include #include #include #include -#include #include #include #include @@ -63,8 +63,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec) snd_soc_dapm_disable_pin(codec, "Mic Jack"); snd_soc_dapm_disable_pin(codec, "Line Jack"); snd_soc_dapm_enable_pin(codec, "Headphone Jack"); - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L); - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R); + gpio_set_value(SPITZ_GPIO_MUTE_L, 1); + gpio_set_value(SPITZ_GPIO_MUTE_R, 1); break; case SPITZ_MIC: /* enable mic jack and bias, mute hp */ @@ -72,8 +72,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec) snd_soc_dapm_disable_pin(codec, "Headset Jack"); snd_soc_dapm_disable_pin(codec, "Line Jack"); snd_soc_dapm_enable_pin(codec, "Mic Jack"); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R); + gpio_set_value(SPITZ_GPIO_MUTE_L, 0); + gpio_set_value(SPITZ_GPIO_MUTE_R, 0); break; case SPITZ_LINE: /* enable line jack, disable mic bias and mute hp */ @@ -81,8 +81,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec) snd_soc_dapm_disable_pin(codec, "Headset Jack"); snd_soc_dapm_disable_pin(codec, "Mic Jack"); snd_soc_dapm_enable_pin(codec, "Line Jack"); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R); + gpio_set_value(SPITZ_GPIO_MUTE_L, 0); + gpio_set_value(SPITZ_GPIO_MUTE_R, 0); break; case SPITZ_HEADSET: /* enable and unmute headset jack enable mic bias, mute L hp */ @@ -90,8 +90,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec) snd_soc_dapm_enable_pin(codec, "Mic Jack"); snd_soc_dapm_disable_pin(codec, "Line Jack"); snd_soc_dapm_enable_pin(codec, "Headset Jack"); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L); - set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R); + gpio_set_value(SPITZ_GPIO_MUTE_L, 0); + gpio_set_value(SPITZ_GPIO_MUTE_R, 1); break; case SPITZ_HP_OFF: @@ -100,8 +100,8 @@ static void spitz_ext_control(struct snd_soc_codec *codec) snd_soc_dapm_disable_pin(codec, "Headset Jack"); snd_soc_dapm_disable_pin(codec, "Mic Jack"); snd_soc_dapm_disable_pin(codec, "Line Jack"); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_L); - reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_MUTE_R); + gpio_set_value(SPITZ_GPIO_MUTE_L, 0); + gpio_set_value(SPITZ_GPIO_MUTE_R, 0); break; } snd_soc_dapm_sync(codec); @@ -215,14 +215,9 @@ static int spitz_set_spk(struct snd_kcontrol *kcontrol, static int spitz_mic_bias(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - if (machine_is_borzoi() || machine_is_spitz()) { - if (SND_SOC_DAPM_EVENT_ON(event)) - set_scoop_gpio(&spitzscoop2_device.dev, - SPITZ_SCP2_MIC_BIAS); - else - reset_scoop_gpio(&spitzscoop2_device.dev, - SPITZ_SCP2_MIC_BIAS); - } + if (machine_is_borzoi() || machine_is_spitz()) + gpio_set_value(SPITZ_GPIO_MIC_BIAS, + SND_SOC_DAPM_EVENT_ON(event)); if (machine_is_akita()) { if (SND_SOC_DAPM_EVENT_ON(event)) -- cgit v1.2.3 From f72de6638b8e55283739de174b57c0ae4203c446 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sat, 6 Sep 2008 08:46:23 +0800 Subject: [ARM] pxa/akita: use pca953x instead of akita-ioexp Use generic pca953x which provides gpiolib interface instead of akita-specific akita-ioexp with non-standard interface to pins. Signed-off-by: Dmitry Baryshkov Cc: Richard Purdie Cc: Mark Brown Signed-off-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 1 - arch/arm/mach-pxa/akita-ioexp.c | 222 --------------------------------- arch/arm/mach-pxa/include/mach/akita.h | 32 ----- arch/arm/mach-pxa/include/mach/spitz.h | 11 ++ arch/arm/mach-pxa/spitz.c | 37 +++--- sound/soc/pxa/spitz.c | 13 +- 6 files changed, 31 insertions(+), 285 deletions(-) delete mode 100644 arch/arm/mach-pxa/akita-ioexp.c delete mode 100644 arch/arm/mach-pxa/include/mach/akita.h (limited to 'sound/soc') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 56f216298bcb..fbedaaf74bd3 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_COLIBRI) += colibri.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o -obj-$(CONFIG_MACH_AKITA) += akita-ioexp.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c deleted file mode 100644 index 5c67b188a3ba..000000000000 --- a/arch/arm/mach-pxa/akita-ioexp.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita) - * (uses a Maxim MAX7310 8 Port IO Expander) - * - * Copyright 2005 Openedhand Ltd. - * - * Author: Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* MAX7310 Regiser Map */ -#define MAX7310_INPUT 0x00 -#define MAX7310_OUTPUT 0x01 -#define MAX7310_POLINV 0x02 -#define MAX7310_IODIR 0x03 /* 1 = Input, 0 = Output */ -#define MAX7310_TIMEOUT 0x04 - -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END }; - -/* I2C Magic */ -I2C_CLIENT_INSMOD; - -static int max7310_write(struct i2c_client *client, int address, int data); -static struct i2c_client max7310_template; -static void akita_ioexp_work(struct work_struct *private_); - -static struct device *akita_ioexp_device; -static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT; -DECLARE_WORK(akita_ioexp, akita_ioexp_work); - - -/* - * MAX7310 Access - */ -static int max7310_config(struct device *dev, int iomode, int polarity) -{ - int ret; - struct i2c_client *client = to_i2c_client(dev); - - ret = max7310_write(client, MAX7310_POLINV, polarity); - if (ret < 0) - return ret; - ret = max7310_write(client, MAX7310_IODIR, iomode); - return ret; -} - -static int max7310_set_ouputs(struct device *dev, int outputs) -{ - struct i2c_client *client = to_i2c_client(dev); - - return max7310_write(client, MAX7310_OUTPUT, outputs); -} - -/* - * I2C Functions - */ -static int max7310_write(struct i2c_client *client, int address, int value) -{ - u8 data[2]; - - data[0] = address & 0xff; - data[1] = value & 0xff; - - if (i2c_master_send(client, data, 2) == 2) - return 0; - return -1; -} - -static int max7310_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - int err; - - if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) - return -ENOMEM; - - max7310_template.adapter = adapter; - max7310_template.addr = address; - - memcpy(new_client, &max7310_template, sizeof(struct i2c_client)); - - if ((err = i2c_attach_client(new_client))) { - kfree(new_client); - return err; - } - - max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0); - akita_ioexp_device = &new_client->dev; - schedule_work(&akita_ioexp); - - return 0; -} - -static int max7310_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, max7310_detect); -} - -static int max7310_detach_client(struct i2c_client *client) -{ - int err; - - akita_ioexp_device = NULL; - - if ((err = i2c_detach_client(client))) - return err; - - kfree(client); - return 0; -} - -static struct i2c_driver max7310_i2c_driver = { - .driver = { - .name = "akita-max7310", - }, - .id = I2C_DRIVERID_AKITAIOEXP, - .attach_adapter = max7310_attach_adapter, - .detach_client = max7310_detach_client, -}; - -static struct i2c_client max7310_template = { - name: "akita-max7310", - driver: &max7310_i2c_driver, -}; - -void akita_set_ioexp(struct device *dev, unsigned char bit) -{ - ioexp_output_value |= bit; - - if (akita_ioexp_device) - schedule_work(&akita_ioexp); - return; -} - -void akita_reset_ioexp(struct device *dev, unsigned char bit) -{ - ioexp_output_value &= ~bit; - - if (akita_ioexp_device) - schedule_work(&akita_ioexp); - return; -} - -EXPORT_SYMBOL(akita_set_ioexp); -EXPORT_SYMBOL(akita_reset_ioexp); - -static void akita_ioexp_work(struct work_struct *private_) -{ - if (akita_ioexp_device) - max7310_set_ouputs(akita_ioexp_device, ioexp_output_value); -} - - -#ifdef CONFIG_PM -static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state) -{ - flush_scheduled_work(); - return 0; -} - -static int akita_ioexp_resume(struct platform_device *pdev) -{ - schedule_work(&akita_ioexp); - return 0; -} -#else -#define akita_ioexp_suspend NULL -#define akita_ioexp_resume NULL -#endif - -static int __init akita_ioexp_probe(struct platform_device *pdev) -{ - return i2c_add_driver(&max7310_i2c_driver); -} - -static int akita_ioexp_remove(struct platform_device *pdev) -{ - i2c_del_driver(&max7310_i2c_driver); - return 0; -} - -static struct platform_driver akita_ioexp_driver = { - .probe = akita_ioexp_probe, - .remove = akita_ioexp_remove, - .suspend = akita_ioexp_suspend, - .resume = akita_ioexp_resume, - .driver = { - .name = "akita-ioexp", - }, -}; - -static int __init akita_ioexp_init(void) -{ - return platform_driver_register(&akita_ioexp_driver); -} - -static void __exit akita_ioexp_exit(void) -{ - platform_driver_unregister(&akita_ioexp_driver); -} - -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("Akita IO-Expander driver"); -MODULE_LICENSE("GPL"); - -fs_initcall(akita_ioexp_init); -module_exit(akita_ioexp_exit); - diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h deleted file mode 100644 index 5d8cc1d9cb10..000000000000 --- a/arch/arm/mach-pxa/include/mach/akita.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Hardware specific definitions for SL-C1000 (Akita) - * - * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* Akita IO Expander GPIOs */ - -#define AKITA_IOEXP_RESERVED_7 (1 << 7) -#define AKITA_IOEXP_IR_ON (1 << 6) -#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) -#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) -#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) -#define AKITA_IOEXP_MIC_BIAS (1 << 2) -#define AKITA_IOEXP_RESERVED_1 (1 << 1) -#define AKITA_IOEXP_RESERVED_0 (1 << 0) - -/* Direction Bitfield 0=output 1=input */ -#define AKITA_IOEXP_IO_DIR 0 -/* Default Values */ -#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP) - -extern struct platform_device akitaioexp_device; - -void akita_set_ioexp(struct device *dev, unsigned char bitmask); -void akita_reset_ioexp(struct device *dev, unsigned char bitmask); - diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 3e28394333e7..31ac26b55bc1 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -151,6 +151,17 @@ #define SPITZ_GPIO_BACKLIGHT_ON (SPITZ_SCP2_GPIO_BASE + 7) #define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8) +/* Akita IO Expander GPIOs */ +#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0) +#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1) +#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2) +#define AKITA_GPIO_BACKLIGHT_ON (AKITA_IOEXP_GPIO_BASE + 3) +#define AKITA_GPIO_BACKLIGHT_CONT (AKITA_IOEXP_GPIO_BASE + 4) +#define AKITA_GPIO_AKIN_PULLUP (AKITA_IOEXP_GPIO_BASE + 5) +#define AKITA_GPIO_IR_ON (AKITA_IOEXP_GPIO_BASE + 6) +#define AKITA_GPIO_RESERVED_7 (AKITA_IOEXP_GPIO_BASE + 7) + /* Spitz IRQ Definitions */ #define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 993a132ff978..1d8654d2fb96 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -24,6 +24,8 @@ #include #include #include +#include +#include #include #include #include @@ -52,7 +54,6 @@ #include #include #include -#include #include #include @@ -313,16 +314,8 @@ static void spitz_notify_intensity(int intensity) } if (machine_is_akita()) { - /* Bit 5 is via IO-Expander */ - if (intensity & 0x0020) - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - else - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT); - - if (intensity) - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); - else - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON); + gpio_set_value(AKITA_GPIO_BACKLIGHT_CONT, !(intensity & 0x20)); + gpio_set_value(AKITA_GPIO_BACKLIGHT_ON, intensity); return; } } @@ -565,10 +558,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode) #ifdef CONFIG_MACH_AKITA static void akita_irda_transceiver_mode(struct device *dev, int mode) { - if (mode & IR_OFF) - akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); - else - akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON); + gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF); pxa2xx_transceiver_mode(dev, mode); } #endif @@ -679,12 +669,17 @@ static void __init spitz_init(void) /* * Akita IO Expander */ -struct platform_device akitaioexp_device = { - .name = "akita-ioexp", - .id = -1, +static struct pca953x_platform_data akita_ioexp = { + .gpio_base = AKITA_IOEXP_GPIO_BASE, }; -EXPORT_SYMBOL_GPL(akitaioexp_device); +static struct i2c_board_info akita_i2c_board_info[] = { + { + .type = "max7310", + .addr = 0x18, + .platform_data = &akita_ioexp, + }, +}; static void __init akita_init(void) { @@ -694,9 +689,9 @@ static void __init akita_init(void) spitz_pcmcia_config.num_devs = 1; platform_scoop_config = &spitz_pcmcia_config; - platform_device_register(&akitaioexp_device); + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info)); - spitzscoop_device.dev.parent = &akitaioexp_device.dev; common_init(); } #endif diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index acfa712844e2..b89a3edd2183 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -28,7 +28,6 @@ #include #include #include -#include #include #include "../codecs/wm8750.h" #include "pxa2xx-pcm.h" @@ -219,14 +218,10 @@ static int spitz_mic_bias(struct snd_soc_dapm_widget *w, gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event)); - if (machine_is_akita()) { - if (SND_SOC_DAPM_EVENT_ON(event)) - akita_set_ioexp(&akitaioexp_device.dev, - AKITA_IOEXP_MIC_BIAS); - else - akita_reset_ioexp(&akitaioexp_device.dev, - AKITA_IOEXP_MIC_BIAS); - } + if (machine_is_akita()) + gpio_set_value(AKITA_GPIO_MIC_BIAS, + SND_SOC_DAPM_EVENT_ON(event)); + return 0; } -- cgit v1.2.3 From a3927471c65b5ca94da853a1a46ec5db4609c502 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 25 Sep 2008 13:30:07 +0100 Subject: [ARM] pxa: avoid needless pxa_gpio_mode() during resume The pin configurations are restored early on during resume. There's no need for drivers to re-affirm the gpio modes. Signed-off-by: Russell King --- sound/soc/pxa/pxa2xx-ac97.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'sound/soc') diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index d94a495bd6bd..7d7ce1648361 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -293,14 +293,6 @@ static int pxa2xx_ac97_suspend(struct platform_device *pdev, static int pxa2xx_ac97_resume(struct platform_device *pdev, struct snd_soc_dai *dai) { - pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); -#ifdef CONFIG_PXA27x - /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); -#endif clk_enable(ac97_clk); return 0; } -- cgit v1.2.3 From 87f3dd77974cba1ba0798abd741ede50f56b3eb3 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 8 Sep 2008 15:26:43 +0800 Subject: [ARM] pxa: simplify DMA register definitions 1. DRCMRxx is no longer recommended, use DRCMR(xx) instead, and pass DRCMR index by "struct resource" if possible 2. DCSRxx, DDADRxx, DSADRxx, DTADRxx, DCMDxx is never used, use DCSR(), DDADR(), DSADR(), DTADR(), DCMD() instead Signed-off-by: Eric Miao Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/include/mach/pxa-regs.h | 154 ------------------------------ drivers/media/video/pxa_camera.c | 12 +-- drivers/net/irda/pxaficp_ir.c | 8 +- sound/arm/pxa2xx-ac97.c | 4 +- sound/soc/pxa/pxa2xx-ac97.c | 10 +- sound/soc/pxa/pxa2xx-i2s.c | 4 +- 6 files changed, 19 insertions(+), 173 deletions(-) (limited to 'sound/soc') diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h index f842fd3d39a2..4cac9269fdf2 100644 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -69,24 +69,6 @@ /* * DMA Controller */ - -#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ -#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ -#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ -#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ -#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ -#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ -#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ -#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ -#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ -#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ -#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ -#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ -#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ -#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ -#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ -#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ - #define DCSR(x) __REG2(0x40000000, (x) << 2) #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ @@ -115,145 +97,9 @@ &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ &__REG2(0x40001100, ((n) & 0x3f) << 2))) -#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ -#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ -#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ -#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ -#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ -#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ -#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ -#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ -#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ -#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ -#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ -#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ -#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ -#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ -#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ -#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ -#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ -#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ -#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ -#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ -#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ -#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ -#define DRCMR23 __REG(0x4000015c) /* Reserved */ -#define DRCMR24 __REG(0x40000160) /* Reserved */ -#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ -#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ -#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ -#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 __REG(0x40000174) /* Reserved */ -#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ -#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ -#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ -#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 __REG(0x40000188) /* Reserved */ -#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ -#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ -#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ -#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 __REG(0x4000019C) /* Reserved */ -#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ -#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ -#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ -#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ -#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ - -#define DRCMRRXSADR DRCMR2 -#define DRCMRTXSADR DRCMR3 -#define DRCMRRXBTRBR DRCMR4 -#define DRCMRTXBTTHR DRCMR5 -#define DRCMRRXFFRBR DRCMR6 -#define DRCMRTXFFTHR DRCMR7 -#define DRCMRRXMCDR DRCMR8 -#define DRCMRRXMODR DRCMR9 -#define DRCMRTXMODR DRCMR10 -#define DRCMRRXPCDR DRCMR11 -#define DRCMRTXPCDR DRCMR12 -#define DRCMRRXSSDR DRCMR13 -#define DRCMRTXSSDR DRCMR14 -#define DRCMRRXSS2DR DRCMR15 -#define DRCMRTXSS2DR DRCMR16 -#define DRCMRRXICDR DRCMR17 -#define DRCMRTXICDR DRCMR18 -#define DRCMRRXSTRBR DRCMR19 -#define DRCMRTXSTTHR DRCMR20 -#define DRCMRRXMMC DRCMR21 -#define DRCMRTXMMC DRCMR22 -#define DRCMRRXSS3DR DRCMR66 -#define DRCMRTXSS3DR DRCMR67 -#define DRCMRUDC(x) DRCMR((x) + 24) - #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ #define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ -#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ -#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ -#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ -#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ -#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ -#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ -#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ -#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ -#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ -#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ -#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ -#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ -#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ -#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ -#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ -#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ -#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ -#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ -#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ -#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ -#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ -#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ -#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ -#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ -#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ -#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ -#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ -#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ -#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ -#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ -#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ -#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ -#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ -#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ -#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ -#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ -#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ -#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ -#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ -#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ -#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ -#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ -#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ -#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ -#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ -#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ -#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ -#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ -#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ -#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ -#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ -#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ -#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ -#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ -#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ -#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ -#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ -#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ -#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ -#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ -#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ -#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ -#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ -#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ - #define DDADR(x) __REG2(0x40000200, (x) << 4) #define DSADR(x) __REG2(0x40000204, (x) << 4) #define DTADR(x) __REG2(0x40000208, (x) << 4) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 388cf94055d3..cf96b2cc4f1c 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1025,9 +1025,9 @@ static int pxa_camera_resume(struct soc_camera_device *icd) struct pxa_camera_dev *pcdev = ici->priv; int i = 0, ret = 0; - DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD; - DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD; - DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD; + DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD; + DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD; + DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD; CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB; CICR1 = pcdev->save_cicr[i++]; @@ -1171,9 +1171,9 @@ static int pxa_camera_probe(struct platform_device *pdev) } dev_dbg(pcdev->dev, "got DMA channel (V) %d\n", pcdev->dma_chans[2]); - DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD; - DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD; - DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD; + DRCMR(68) = pcdev->dma_chans[0] | DRCMR_MAPVLD; + DRCMR(69) = pcdev->dma_chans[1] | DRCMR_MAPVLD; + DRCMR(70) = pcdev->dma_chans[2] | DRCMR_MAPVLD; /* request irq */ err = request_irq(pcdev->irq, pxa_camera_irq, 0, PXA_CAM_DRV_NAME, diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 4aa61a1a3d55..c5b02b66f756 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -572,8 +572,8 @@ static void pxa_irda_startup(struct pxa_irda *si) ICCR2 = ICCR2_TXP | ICCR2_TRIG_32; /* configure DMAC */ - DRCMR17 = si->rxdma | DRCMR_MAPVLD; - DRCMR18 = si->txdma | DRCMR_MAPVLD; + DRCMR(17) = si->rxdma | DRCMR_MAPVLD; + DRCMR(18) = si->txdma | DRCMR_MAPVLD; /* force SIR reinitialization */ si->speed = 4000000; @@ -602,8 +602,8 @@ static void pxa_irda_shutdown(struct pxa_irda *si) /* disable the STUART or FICP clocks */ pxa_irda_disable_clk(si); - DRCMR17 = 0; - DRCMR18 = 0; + DRCMR(17) = 0; + DRCMR(18) = 0; local_irq_restore(flags); diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 199cca3366df..714b3baa4be7 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -215,7 +215,7 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_out = { .name = "AC97 PCM out", .dev_addr = __PREG(PCDR), - .drcmr = &DRCMRTXPCDR, + .drcmr = &DRCMR(12), .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_BURST32 | DCMD_WIDTH4, }; @@ -223,7 +223,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_out = { static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_in = { .name = "AC97 PCM in", .dev_addr = __PREG(PCDR), - .drcmr = &DRCMRRXPCDR, + .drcmr = &DRCMR(11), .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_BURST32 | DCMD_WIDTH4, }; diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 7d7ce1648361..ac8f227bab0b 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -244,7 +244,7 @@ struct snd_ac97_bus_ops soc_ac97_ops = { static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = { .name = "AC97 PCM Stereo out", .dev_addr = __PREG(PCDR), - .drcmr = &DRCMRTXPCDR, + .drcmr = &DRCMR(12), .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_BURST32 | DCMD_WIDTH4, }; @@ -252,7 +252,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = { static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = { .name = "AC97 PCM Stereo in", .dev_addr = __PREG(PCDR), - .drcmr = &DRCMRRXPCDR, + .drcmr = &DRCMR(11), .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_BURST32 | DCMD_WIDTH4, }; @@ -260,7 +260,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = { static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = { .name = "AC97 Aux PCM (Slot 5) Mono out", .dev_addr = __PREG(MODR), - .drcmr = &DRCMRTXMODR, + .drcmr = &DRCMR(10), .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_BURST16 | DCMD_WIDTH2, }; @@ -268,7 +268,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = { static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = { .name = "AC97 Aux PCM (Slot 5) Mono in", .dev_addr = __PREG(MODR), - .drcmr = &DRCMRRXMODR, + .drcmr = &DRCMR(9), .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_BURST16 | DCMD_WIDTH2, }; @@ -276,7 +276,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = { static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = { .name = "AC97 Mic PCM (Slot 6) Mono in", .dev_addr = __PREG(MCDR), - .drcmr = &DRCMRRXMCDR, + .drcmr = &DRCMR(8), .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_BURST16 | DCMD_WIDTH2, }; diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index c796b1882776..2dbe612fdddc 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -44,7 +44,7 @@ static struct clk *clk_i2s; static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = { .name = "I2S PCM Stereo out", .dev_addr = __PREG(SADR), - .drcmr = &DRCMRTXSADR, + .drcmr = &DRCMR(3), .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_BURST32 | DCMD_WIDTH4, }; @@ -52,7 +52,7 @@ static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = { static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_in = { .name = "I2S PCM Stereo in", .dev_addr = __PREG(SADR), - .drcmr = &DRCMRRXSADR, + .drcmr = &DRCMR(2), .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_BURST32 | DCMD_WIDTH4, }; -- cgit v1.2.3 From 52358ba3a89012c54712c24074ceb4b1c669af52 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 8 Sep 2008 15:37:50 +0800 Subject: [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c Signed-off-by: Eric Miao Acked-by: Mark Brown Signed-off-by: Russell King --- arch/arm/mach-pxa/include/mach/pxa-regs.h | 39 +----------------------------- sound/soc/pxa/pxa2xx-i2s.c | 40 +++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+), 38 deletions(-) (limited to 'sound/soc') diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h index 4cac9269fdf2..98ded450d0fe 100644 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -269,46 +269,9 @@ */ /* - * Serial Audio Controller + * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c */ -#define SACR0 __REG(0x40400000) /* Global Control Register */ -#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ -#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ -#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ -#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ -#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ - -#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ -#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ -#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ -#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ -#define SACR0_ENB (1 << 0) /* Enable I2S Link */ -#define SACR1_ENLBF (1 << 5) /* Enable Loopback */ -#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ -#define SACR1_DREC (1 << 3) /* Disable Recording Function */ -#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ - -#define SASR0_I2SOFF (1 << 7) /* Controller Status */ -#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ -#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ -#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ -#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ -#define SASR0_BSY (1 << 2) /* I2S Busy */ -#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ -#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ - -#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ -#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ - -#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ -#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ -#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ -#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ - /* * AC97 Controller registers */ diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 2dbe612fdddc..ad4c31ddb3d4 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -30,6 +30,46 @@ #include "pxa2xx-pcm.h" #include "pxa2xx-i2s.h" +/* + * I2S Controller Register and Bit Definitions + */ +#define SACR0 __REG(0x40400000) /* Global Control Register */ +#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ +#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ +#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ +#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ +#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ +#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ + +#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ +#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ +#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ +#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ +#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ +#define SACR0_ENB (1 << 0) /* Enable I2S Link */ +#define SACR1_ENLBF (1 << 5) /* Enable Loopback */ +#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ +#define SACR1_DREC (1 << 3) /* Disable Recording Function */ +#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ + +#define SASR0_I2SOFF (1 << 7) /* Controller Status */ +#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ +#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ +#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ +#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ +#define SASR0_BSY (1 << 2) /* I2S Busy */ +#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ +#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ + +#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ +#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ + +#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ +#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ +#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ +#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ + struct pxa_i2s_port { u32 sadiv; u32 sacr0; -- cgit v1.2.3