From d929b2b7464f95ec01e47f560b1e687482ba8929 Mon Sep 17 00:00:00 2001 From: Julien Panis Date: Mon, 21 Aug 2023 16:24:18 +0200 Subject: bus: ti-sysc: Use fsleep() instead of usleep_range() in sysc_reset() The am335x-evm started producing boot errors because of subtle timing changes: Unhandled fault: external abort on non-linefetch (0x1008) at 0xf03c1010 ... sysc_reset from sysc_probe+0xf60/0x1514 sysc_probe from platform_probe+0x5c/0xbc ... The fix consists in using the appropriate sleep function in sysc reset. For flexible sleeping, fsleep is recommended. Here, sysc delay parameter can take any value in [0 - 255] us range. As a result, fsleep() should be used, calling udelay() for a sysc delay lower than 10 us. Signed-off-by: Julien Panis Fixes: e709ed70d122 ("bus: ti-sysc: Fix missing reset delay handling") Message-ID: <20230821-fix-ti-sysc-reset-v1-1-5a0a5d8fae55@baylibre.com> Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index eb4e7bee1e20..cf09b6b88cf7 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2150,8 +2150,7 @@ static int sysc_reset(struct sysc *ddata) } if (ddata->cfg.srst_udelay) - usleep_range(ddata->cfg.srst_udelay, - ddata->cfg.srst_udelay * 2); + fsleep(ddata->cfg.srst_udelay); if (ddata->post_reset_quirk) ddata->post_reset_quirk(ddata); -- cgit v1.2.3 From 11729caa520950e17cd81bc43ffc477c46cf791e Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 6 Sep 2023 18:34:42 -0500 Subject: bus: ti-sysc: Fix missing AM35xx SoC matching Commit feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") created a list of SoC types searching for strings based on names and wildcards which associates the SoC to different families. The OMAP34xx and OMAP35xx are treated as SOC_3430 while OMAP36xx and OMAP37xx are treated as SOC_3630, but the AM35xx isn't listed. The AM35xx is mostly an OMAP3430, and a later commit a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") looks for the SOC type and behaves in a certain way if it's SOC_3430. This caused a regression on the AM3517 causing it to return two errors: ti-sysc: probe of 48318000.target-module failed with error -16 ti-sysc: probe of 49032000.target-module failed with error -16 Fix this by treating the creating SOC_AM35 and inserting it between the SOC_3430 and SOC_3630. If it is treaed the same way as the SOC_3430 when checking the status of sysc_check_active_timer, the error conditions will disappear. Fixes: a12315d6d270 ("bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific") Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") Signed-off-by: Adam Ford Message-ID: <20230906233442.270835-1-aford173@gmail.com> Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index cf09b6b88cf7..33e8d780b04b 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -38,6 +38,7 @@ enum sysc_soc { SOC_2420, SOC_2430, SOC_3430, + SOC_AM35, SOC_3630, SOC_4430, SOC_4460, @@ -1862,7 +1863,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata) dev_warn(ddata->dev, "%s: timed out %08x !+ %08x\n", __func__, val, irq_mask); - if (sysc_soc->soc == SOC_3430) { + if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) { /* Clear DSS_SDI_CONTROL */ sysc_write(ddata, 0x44, 0); @@ -3024,6 +3025,7 @@ static void ti_sysc_idle(struct work_struct *work) static const struct soc_device_attribute sysc_soc_match[] = { SOC_FLAG("OMAP242*", SOC_2420), SOC_FLAG("OMAP243*", SOC_2430), + SOC_FLAG("AM35*", SOC_AM35), SOC_FLAG("OMAP3[45]*", SOC_3430), SOC_FLAG("OMAP3[67]*", SOC_3630), SOC_FLAG("OMAP443*", SOC_4430), @@ -3228,7 +3230,7 @@ static int sysc_check_active_timer(struct sysc *ddata) * can be dropped if we stop supporting old beagleboard revisions * A to B4 at some point. */ - if (sysc_soc->soc == SOC_3430) + if (sysc_soc->soc == SOC_3430 || sysc_soc->soc == SOC_AM35) error = -ENXIO; else error = -EBUSY; -- cgit v1.2.3 From c3638b851bc1ca0022dca9d6ca4beaa6ef03a216 Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Sat, 12 Aug 2023 02:18:18 +0530 Subject: firmware: arm_scmi: Fixup perf power-cost/microwatt support The perf power scale value would currently be reported as bogowatts if the platform firmware supports microwatt power scale and meets the perf major version requirements. Fix this by populating version information in the driver private data before the call to protocol attributes is made. CC: Chandra Sekhar Lingutla Fixes: 3630cd8130ce ("firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts") Signed-off-by: Sibi Sankar Reviewed-by: Cristian Marussi Link: https://lore.kernel.org/r/20230811204818.30928-1-quic_sibis@quicinc.com Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/perf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index c0cd556fbaae..30dedd6ebfde 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -1080,6 +1080,8 @@ static int scmi_perf_protocol_init(const struct scmi_protocol_handle *ph) if (!pinfo) return -ENOMEM; + pinfo->version = version; + ret = scmi_perf_attributes_get(ph, pinfo); if (ret) return ret; @@ -1104,8 +1106,6 @@ static int scmi_perf_protocol_init(const struct scmi_protocol_handle *ph) if (ret) return ret; - pinfo->version = version; - return ph->set_priv(ph, pinfo); } -- cgit v1.2.3 From 069969d6c5264d2348fd6cf0cedc00fd87ff3cee Mon Sep 17 00:00:00 2001 From: Yue Haibing Date: Thu, 10 Aug 2023 22:49:43 +0800 Subject: tee: Remove unused declarations Commit 4fb0a5eb364d ("tee: add OP-TEE driver") declared but never implemented optee_supp_read()/optee_supp_write(). Commit 967c9cca2cc5 ("tee: generic TEE subsystem") never implemented tee_shm_init(). Signed-off-by: Yue Haibing Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander --- drivers/tee/optee/optee_private.h | 2 -- drivers/tee/tee_private.h | 2 -- 2 files changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h index 72685ee0d53f..6bb5cae09688 100644 --- a/drivers/tee/optee/optee_private.h +++ b/drivers/tee/optee/optee_private.h @@ -238,8 +238,6 @@ int optee_notif_send(struct optee *optee, u_int key); u32 optee_supp_thrd_req(struct tee_context *ctx, u32 func, size_t num_params, struct tee_param *param); -int optee_supp_read(struct tee_context *ctx, void __user *buf, size_t len); -int optee_supp_write(struct tee_context *ctx, void __user *buf, size_t len); void optee_supp_init(struct optee_supp *supp); void optee_supp_uninit(struct optee_supp *supp); void optee_supp_release(struct optee_supp *supp); diff --git a/drivers/tee/tee_private.h b/drivers/tee/tee_private.h index 409cadcc1cff..754e11dcb240 100644 --- a/drivers/tee/tee_private.h +++ b/drivers/tee/tee_private.h @@ -47,8 +47,6 @@ struct tee_device { struct tee_shm_pool *pool; }; -int tee_shm_init(void); - int tee_shm_get_fd(struct tee_shm *shm); bool tee_device_get(struct tee_device *teedev); -- cgit v1.2.3 From e5deb8f76e64d94ccef715e75ebafffd0c312d80 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 7 Sep 2023 08:53:28 +0300 Subject: bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE is used to force idle target modules rather than block idle during usage. The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when a target module is active, and configure autoidle and wake-up when a target module is inactive. We are missing configuring the target module on sysc_disable_module(), and missing toggling of the wake-up bit. Let's fix the issue to allow uart wake-up to work. Fixes: fb685f1c190e ("bus: ti-sysc: Handle swsup idle mode quirks") Tested-by: Dhruva Gole Tested-by: Kevin Hilman Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 33e8d780b04b..d57bc066dce6 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1098,6 +1098,11 @@ static int sysc_enable_module(struct device *dev) if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_SIDLE_ACT)) { best_mode = SYSC_IDLE_NO; + + /* Clear WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg &= ~BIT(regbits->enwkup_shift); } else { best_mode = fls(ddata->cfg.sidlemodes) - 1; if (best_mode > SYSC_IDLE_MASK) { @@ -1225,6 +1230,13 @@ set_sidle: } } + if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) { + /* Set WAKEUP */ + if (regbits->enwkup_shift >= 0 && + ddata->cfg.sysc_val & BIT(regbits->enwkup_shift)) + reg |= BIT(regbits->enwkup_shift); + } + reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift); reg |= best_mode << regbits->sidle_shift; if (regbits->autoidle_shift >= 0 && @@ -1519,16 +1531,16 @@ struct sysc_revision_quirk { static const struct sysc_revision_quirk sysc_revision_quirks[] = { /* These drivers need to be fixed to not use pm_runtime_irq_safe() */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Uarts on omap4 and later */ SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff, - SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE), /* Quirks that need to be set based on the module address */ SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff, -- cgit v1.2.3 From e527adfb9b7d9d05a4577c116519e59a2bda4b05 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 15 Jan 2023 19:13:46 +0100 Subject: firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels() If mbox_request_channel_byname() fails, the memory allocated a few lines above still need to be freed before going to the error handling path. Fixes: 046326989a18 ("firmware: imx: Save channel name for further use") Signed-off-by: Christophe JAILLET Reviewed-by: Daniel Baluta Signed-off-by: Shawn Guo --- drivers/firmware/imx/imx-dsp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c index 3dba590a2a95..508eab346fc6 100644 --- a/drivers/firmware/imx/imx-dsp.c +++ b/drivers/firmware/imx/imx-dsp.c @@ -114,6 +114,7 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc) dsp_chan->idx = i % 2; dsp_chan->ch = mbox_request_channel_byname(cl, chan_name); if (IS_ERR(dsp_chan->ch)) { + kfree(dsp_chan->name); ret = PTR_ERR(dsp_chan->ch); if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to request mbox chan %s ret %d\n", -- cgit v1.2.3 From 9d1e8275a28f51599d754ce661c91e0a689c0234 Mon Sep 17 00:00:00 2001 From: Nathan Rossi Date: Mon, 14 Aug 2023 01:57:00 +0000 Subject: soc: imx8m: Enable OCOTP clock for imx8mm before reading registers Commit 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") added configuration to enable the OCOTP clock before attempting to read from the associated registers. This same kexec issue is present with the imx8m SoCs that use the imx8mm_soc_uid function (e.g. imx8mp). This requires the imx8mm_soc_uid function to configure the OCOTP clock before accessing the associated registers. This change implements the same clock enable functionality that is present in the imx8mq_soc_revision function for the imx8mm_soc_uid function. Signed-off-by: Nathan Rossi Reviewed-by: Fabio Estevam Fixes: 836fb30949d9 ("soc: imx8m: Enable OCOTP clock before reading the register") Signed-off-by: Shawn Guo --- drivers/soc/imx/soc-imx8m.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c index 1dcd243df567..ec87d9d878f3 100644 --- a/drivers/soc/imx/soc-imx8m.c +++ b/drivers/soc/imx/soc-imx8m.c @@ -100,6 +100,7 @@ static void __init imx8mm_soc_uid(void) { void __iomem *ocotp_base; struct device_node *np; + struct clk *clk; u32 offset = of_machine_is_compatible("fsl,imx8mp") ? IMX8MP_OCOTP_UID_OFFSET : 0; @@ -109,11 +110,20 @@ static void __init imx8mm_soc_uid(void) ocotp_base = of_iomap(np, 0); WARN_ON(!ocotp_base); + clk = of_clk_get_by_name(np, NULL); + if (IS_ERR(clk)) { + WARN_ON(IS_ERR(clk)); + return; + } + + clk_prepare_enable(clk); soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset); soc_uid <<= 32; soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset); + clk_disable_unprepare(clk); + clk_put(clk); iounmap(ocotp_base); of_node_put(np); } -- cgit v1.2.3 From 9dda1178479aa0a73fe0eaabfe2d9a1c603cfeed Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 19 Sep 2023 18:41:01 +0100 Subject: firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND As per the FF-A specification: section "Usage of other memory region attributes", in a transaction to donate memory or lend memory to a single borrower, if the receiver is a PE or Proxy endpoint, the owner must not specify the attributes and the relayer will return INVALID_PARAMETERS if the attributes are set. Let us not set the memory region attributes for MEM_LEND. Fixes: 82a8daaecfd9 ("firmware: arm_ffa: Add support for MEM_LEND") Reported-by: Joao Alves Reported-by: Olivier Deprez Link: https://lore.kernel.org/r/20230919-ffa_v1-1_notif-v2-13-6f3a3ca3923c@arm.com Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 2109cd178ff7..121f4fc903cd 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -397,6 +397,19 @@ static u32 ffa_get_num_pages_sg(struct scatterlist *sg) return num_pages; } +static u8 ffa_memory_attributes_get(u32 func_id) +{ + /* + * For the memory lend or donate operation, if the receiver is a PE or + * a proxy endpoint, the owner/sender must not specify the attributes + */ + if (func_id == FFA_FN_NATIVE(MEM_LEND) || + func_id == FFA_MEM_LEND) + return 0; + + return FFA_MEM_NORMAL | FFA_MEM_WRITE_BACK | FFA_MEM_INNER_SHAREABLE; +} + static int ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize, struct ffa_mem_ops_args *args) @@ -413,8 +426,7 @@ ffa_setup_and_transmit(u32 func_id, void *buffer, u32 max_fragsize, mem_region->tag = args->tag; mem_region->flags = args->flags; mem_region->sender_id = drv_info->vm_id; - mem_region->attributes = FFA_MEM_NORMAL | FFA_MEM_WRITE_BACK | - FFA_MEM_INNER_SHAREABLE; + mem_region->attributes = ffa_memory_attributes_get(func_id); ep_mem_access = &mem_region->ep_mem_access[0]; for (idx = 0; idx < args->nattrs; idx++, ep_mem_access++) { -- cgit v1.2.3 From 8e4a28f9796114ee83a20223a319436d4a100bfa Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Thu, 31 Aug 2023 19:43:11 +0800 Subject: soc: loongson: loongson_pm2: Add dependency for INPUT Since commit 67694c076bd7 ("soc: loongson2_pm: add power management support"), the Loongson-2K PM driver was added, but it didn't update the Kconfig entry for the INPUT dependency, leading to build errors, so update the Kconfig entry to depend on INPUT. /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `loongson2_power_button_init': /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:101:(.text+0x350): undefined reference to `input_allocate_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:109:(.text+0x3dc): undefined reference to `input_set_capability' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:111:(.text+0x3e4): undefined reference to `input_register_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: /work/lnx/next/linux-next-20230825/LOONG64/../drivers/soc/loongson/loongson2_pm.c:125:(.text+0x3fc): undefined reference to `input_free_device' /opt/crosstool/gcc-13.2.0-nolibc/loongarch64-linux/bin/loongarch64-linux-ld: drivers/soc/loongson/loongson2_pm.o: in function `input_report_key': /work/lnx/next/linux-next-20230825/LOONG64/../include/linux/input.h:425:(.text+0x58c): undefined reference to `input_event' Reported-by: Randy Dunlap Signed-off-by: Binbin Zhou Signed-off-by: Arnd Bergmann --- drivers/soc/loongson/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/soc/loongson/Kconfig b/drivers/soc/loongson/Kconfig index 314e13bb3e01..368344943a93 100644 --- a/drivers/soc/loongson/Kconfig +++ b/drivers/soc/loongson/Kconfig @@ -20,6 +20,7 @@ config LOONGSON2_GUTS config LOONGSON2_PM bool "Loongson-2 SoC Power Management Controller Driver" depends on LOONGARCH && OF + depends on INPUT=y help The Loongson-2's power management controller was ACPI, supports ACPI S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To -- cgit v1.2.3 From e26e788a2a0be414397ced9cc8e462e6baa497c6 Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Thu, 31 Aug 2023 19:43:13 +0800 Subject: soc: loongson: loongson_pm2: Drop useless of_device_id compatible Now, "loongson,ls2k0500-pmc" is used as fallback compatible, so the ls2k1000 compatible in the driver can be dropped directly. Signed-off-by: Binbin Zhou Signed-off-by: Arnd Bergmann --- drivers/soc/loongson/loongson2_pm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/loongson/loongson2_pm.c b/drivers/soc/loongson/loongson2_pm.c index 796add6e8b63..5ffb77afd9eb 100644 --- a/drivers/soc/loongson/loongson2_pm.c +++ b/drivers/soc/loongson/loongson2_pm.c @@ -197,7 +197,6 @@ static int loongson2_pm_probe(struct platform_device *pdev) static const struct of_device_id loongson2_pm_match[] = { { .compatible = "loongson,ls2k0500-pmc", }, - { .compatible = "loongson,ls2k1000-pmc", }, {}, }; -- cgit v1.2.3 From a2fd542287d02d35d61839a09d4b18ccc4b2ff0e Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Thu, 31 Aug 2023 19:43:25 +0800 Subject: soc: loongson: loongson_pm2: Populate children syscon nodes The syscon poweroff and reboot nodes logically belong to the Power Management Unit so populate possible children. Without it, the reboot/poweroff feature becomes unavailable. Signed-off-by: Binbin Zhou Signed-off-by: Arnd Bergmann --- drivers/soc/loongson/loongson2_pm.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/soc/loongson/loongson2_pm.c b/drivers/soc/loongson/loongson2_pm.c index 5ffb77afd9eb..b8e5e1e3528a 100644 --- a/drivers/soc/loongson/loongson2_pm.c +++ b/drivers/soc/loongson/loongson2_pm.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -192,6 +193,11 @@ static int loongson2_pm_probe(struct platform_device *pdev) if (loongson_sysconf.suspend_addr) suspend_set_ops(&loongson2_suspend_ops); + /* Populate children */ + retval = devm_of_platform_populate(dev); + if (retval) + dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n"); + return 0; } -- cgit v1.2.3 From daacef89cd1bb7e345539db10e979e1b78451591 Mon Sep 17 00:00:00 2001 From: Dongliang Mu Date: Fri, 1 Sep 2023 14:25:48 +0800 Subject: soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource() Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Dongliang Mu Signed-off-by: Binbin Zhou Signed-off-by: Arnd Bergmann --- drivers/soc/loongson/loongson2_guts.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/soc/loongson/loongson2_guts.c b/drivers/soc/loongson/loongson2_guts.c index bace4bc8e03b..d97c77a9a4a2 100644 --- a/drivers/soc/loongson/loongson2_guts.c +++ b/drivers/soc/loongson/loongson2_guts.c @@ -94,7 +94,6 @@ static int loongson2_guts_probe(struct platform_device *pdev) { struct device_node *root, *np = pdev->dev.of_node; struct device *dev = &pdev->dev; - struct resource *res; const struct loongson2_soc_die_attr *soc_die; const char *machine; u32 svr; @@ -106,8 +105,7 @@ static int loongson2_guts_probe(struct platform_device *pdev) guts->little_endian = of_property_read_bool(np, "little-endian"); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - guts->regs = ioremap(res->start, res->end - res->start + 1); + guts->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(guts->regs)) return PTR_ERR(guts->regs); -- cgit v1.2.3 From a776cc49718cc5230aa83a0389002ed92bfc76d7 Mon Sep 17 00:00:00 2001 From: Mingtong Bao Date: Fri, 1 Sep 2023 14:25:49 +0800 Subject: soc: loongson: loongson2_guts: Remove unneeded semicolon No functional modification involved. ./drivers/soc/loongson/loongson2_guts.c:73:2-3: Unneeded semicolon. Reviewed-by: Huacai Chen Signed-off-by: Mingtong Bao Signed-off-by: Arnd Bergmann --- drivers/soc/loongson/loongson2_guts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/loongson/loongson2_guts.c b/drivers/soc/loongson/loongson2_guts.c index d97c77a9a4a2..9a469779eea7 100644 --- a/drivers/soc/loongson/loongson2_guts.c +++ b/drivers/soc/loongson/loongson2_guts.c @@ -70,7 +70,7 @@ static const struct loongson2_soc_die_attr *loongson2_soc_die_match( if (matches->svr == (svr & matches->mask)) return matches; matches++; - }; + } return NULL; } -- cgit v1.2.3