From 8745465e884c06736aafc6c0e7344ac3a3c7df94 Mon Sep 17 00:00:00 2001 From: Javier Carrasco Date: Wed, 3 Jan 2024 13:08:51 +0100 Subject: iio: light: as73211: use IIO_VAL_FRACTIONAL for intensity scales The scale values associated to the light channels are calculated as a division that can be better expressed as an IIO_VAL_FRACTIONAL type instead of the current IIO_VAL_INT. Note that the constant values used for the calculation were scaled up to work with integers, turning the nW/cm^2 units from the datasheet into nW/m^2, which would not be necessary with the IIO_VAL_FRACTIONAL type. But to avoid issues from current users of the driver, the units must be kept. Signed-off-by: Javier Carrasco Signed-off-by: Jonathan Cameron --- drivers/iio/light/as73211.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/as73211.c b/drivers/iio/light/as73211.c index ec97a3a46839..b4c6f389a292 100644 --- a/drivers/iio/light/as73211.c +++ b/drivers/iio/light/as73211.c @@ -356,25 +356,24 @@ static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons return IIO_VAL_INT_PLUS_MICRO; case IIO_INTENSITY: { - unsigned int scale; switch (chan->channel2) { case IIO_MOD_X: - scale = AS73211_SCALE_X; + *val = AS73211_SCALE_X; break; case IIO_MOD_Y: - scale = AS73211_SCALE_Y; + *val = AS73211_SCALE_Y; break; case IIO_MOD_Z: - scale = AS73211_SCALE_Z; + *val = AS73211_SCALE_Z; break; default: return -EINVAL; } - scale /= as73211_gain(data); - scale /= as73211_integration_time_1024cyc(data); - *val = scale; - return IIO_VAL_INT; + *val2 = as73211_integration_time_1024cyc(data) * + as73211_gain(data); + + return IIO_VAL_FRACTIONAL; default: return -EINVAL; -- cgit v1.2.3 From 02324a09cbe2ae38ab081dd5a1f620ccfd3c62b7 Mon Sep 17 00:00:00 2001 From: Javier Carrasco Date: Wed, 3 Jan 2024 13:08:53 +0100 Subject: iio: light: as73211: add support for as7331 The AMS AS7331 is a UV light sensor with three channels: UVA, UVB and UVC (also known as deep UV and referenced as DUV in the iio core). Its internal structure and forming blocks are practically identical to the ones the AS73211 contains: API, internal DAC, I2C interface and registers, measurement modes, number of channels and pinout. The only difference between them is the photodiodes used to acquire light, which means that only some modifications are required to add support for the AS7331 in the existing driver. The temperature channel is identical for both devices and only the channel modifiers of the IIO_INTENSITY channels need to account for the device type. The scale values have been obtained from the chapter "7.5 Transfer Function" of the official datasheet[1] for the configuration chosen as basis (Nclk = 1024 and GAIN = 1). Those values keep the units from the datasheet (nW/cm^2), as opposed to the units used for the AS73211 (nW/m^2). Add a new device-specific data structure to account for the device differences: channel types and scale of LSB per channel. [1] https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf Tested-by: Christian Eggers Signed-off-by: Javier Carrasco Signed-off-by: Jonathan Cameron --- drivers/iio/light/Kconfig | 5 +- drivers/iio/light/as73211.c | 141 ++++++++++++++++++++++++++++++++++++-------- 2 files changed, 118 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 143003232d1c..fd5a9879a582 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -87,13 +87,14 @@ config APDS9960 module will be called apds9960 config AS73211 - tristate "AMS AS73211 XYZ color sensor" + tristate "AMS AS73211 XYZ color sensor and AMS AS7331 UV sensor" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the AMS AS73211 - JENCOLOR(R) Digital XYZ Sensor. + JENCOLOR(R) Digital XYZ and the AMS AS7331 UVA, UVB and UVC + ultraviolet sensors. For triggered measurements, you will need an additional trigger driver like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. diff --git a/drivers/iio/light/as73211.c b/drivers/iio/light/as73211.c index b4c6f389a292..be0068081ebb 100644 --- a/drivers/iio/light/as73211.c +++ b/drivers/iio/light/as73211.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor + * Support for AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 + * UVA, UVB and UVC (DUV) Ultraviolet Sensor * * Author: Christian Eggers * @@ -9,7 +10,9 @@ * Color light sensor with 16-bit channels for x, y, z and temperature); * 7-bit I2C slave address 0x74 .. 0x77. * - * Datasheet: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf + * Datasheets: + * AS73211: https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf + * AS7331: https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf */ #include @@ -84,6 +87,20 @@ static const int as73211_hardwaregain_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, }; +struct as73211_data; + +/** + * struct as73211_spec_dev_data - device-specific data + * @intensity_scale: Function to retrieve intensity scale values. + * @channels: Device channels. + * @num_channels: Number of channels of the device. + */ +struct as73211_spec_dev_data { + int (*intensity_scale)(struct as73211_data *data, int chan, int *val, int *val2); + struct iio_chan_spec const *channels; + int num_channels; +}; + /** * struct as73211_data - Instance data for one AS73211 * @client: I2C client. @@ -94,6 +111,7 @@ static const int as73211_hardwaregain_avail[] = { * @mutex: Keeps cached registers in sync with the device. * @completion: Completion to wait for interrupt. * @int_time_avail: Available integration times (depend on sampling frequency). + * @spec_dev: device-specific configuration. */ struct as73211_data { struct i2c_client *client; @@ -104,6 +122,7 @@ struct as73211_data { struct mutex mutex; struct completion completion; int int_time_avail[AS73211_SAMPLE_TIME_NUM * 2]; + const struct as73211_spec_dev_data *spec_dev; }; #define AS73211_COLOR_CHANNEL(_color, _si, _addr) { \ @@ -138,6 +157,10 @@ struct as73211_data { #define AS73211_SCALE_Y 298384270 /* nW/m^2 */ #define AS73211_SCALE_Z 160241927 /* nW/m^2 */ +#define AS7331_SCALE_UVA 340000 /* nW/cm^2 */ +#define AS7331_SCALE_UVB 378000 /* nW/cm^2 */ +#define AS7331_SCALE_UVC 166000 /* nW/cm^2 */ + /* Channel order MUST match devices result register order */ #define AS73211_SCAN_INDEX_TEMP 0 #define AS73211_SCAN_INDEX_X 1 @@ -176,6 +199,28 @@ static const struct iio_chan_spec as73211_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS), }; +static const struct iio_chan_spec as7331_channels[] = { + { + .type = IIO_TEMP, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .address = AS73211_OUT_TEMP, + .scan_index = AS73211_SCAN_INDEX_TEMP, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_LE, + } + }, + AS73211_COLOR_CHANNEL(LIGHT_UVA, AS73211_SCAN_INDEX_X, AS73211_OUT_MRES1), + AS73211_COLOR_CHANNEL(LIGHT_UVB, AS73211_SCAN_INDEX_Y, AS73211_OUT_MRES2), + AS73211_COLOR_CHANNEL(LIGHT_DUV, AS73211_SCAN_INDEX_Z, AS73211_OUT_MRES3), + IIO_CHAN_SOFT_TIMESTAMP(AS73211_SCAN_INDEX_TS), +}; + static unsigned int as73211_integration_time_1024cyc(struct as73211_data *data) { /* @@ -316,6 +361,48 @@ static int as73211_req_data(struct as73211_data *data) return 0; } +static int as73211_intensity_scale(struct as73211_data *data, int chan, + int *val, int *val2) +{ + switch (chan) { + case IIO_MOD_X: + *val = AS73211_SCALE_X; + break; + case IIO_MOD_Y: + *val = AS73211_SCALE_Y; + break; + case IIO_MOD_Z: + *val = AS73211_SCALE_Z; + break; + default: + return -EINVAL; + } + *val2 = as73211_integration_time_1024cyc(data) * as73211_gain(data); + + return IIO_VAL_FRACTIONAL; +} + +static int as7331_intensity_scale(struct as73211_data *data, int chan, + int *val, int *val2) +{ + switch (chan) { + case IIO_MOD_LIGHT_UVA: + *val = AS7331_SCALE_UVA; + break; + case IIO_MOD_LIGHT_UVB: + *val = AS7331_SCALE_UVB; + break; + case IIO_MOD_LIGHT_DUV: + *val = AS7331_SCALE_UVC; + break; + default: + return -EINVAL; + } + *val2 = as73211_integration_time_1024cyc(data) * as73211_gain(data); + + return IIO_VAL_FRACTIONAL; +} + static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { @@ -355,29 +442,13 @@ static int as73211_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec cons *val2 = AS73211_SCALE_TEMP_MICRO; return IIO_VAL_INT_PLUS_MICRO; - case IIO_INTENSITY: { - - switch (chan->channel2) { - case IIO_MOD_X: - *val = AS73211_SCALE_X; - break; - case IIO_MOD_Y: - *val = AS73211_SCALE_Y; - break; - case IIO_MOD_Z: - *val = AS73211_SCALE_Z; - break; - default: - return -EINVAL; - } - *val2 = as73211_integration_time_1024cyc(data) * - as73211_gain(data); - - return IIO_VAL_FRACTIONAL; + case IIO_INTENSITY: + return data->spec_dev->intensity_scale(data, chan->channel2, + val, val2); default: return -EINVAL; - }} + } case IIO_CHAN_INFO_SAMP_FREQ: /* f_samp is configured in CREG3 in powers of 2 (x 1.024 MHz) */ @@ -675,13 +746,17 @@ static int as73211_probe(struct i2c_client *client) i2c_set_clientdata(client, indio_dev); data->client = client; + data->spec_dev = i2c_get_match_data(client); + if (!data->spec_dev) + return -EINVAL; + mutex_init(&data->mutex); init_completion(&data->completion); indio_dev->info = &as73211_info; indio_dev->name = AS73211_DRV_NAME; - indio_dev->channels = as73211_channels; - indio_dev->num_channels = ARRAY_SIZE(as73211_channels); + indio_dev->channels = data->spec_dev->channels; + indio_dev->num_channels = data->spec_dev->num_channels; indio_dev->modes = INDIO_DIRECT_MODE; ret = i2c_smbus_read_byte_data(data->client, AS73211_REG_OSR); @@ -771,14 +846,28 @@ static int as73211_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(as73211_pm_ops, as73211_suspend, as73211_resume); +static const struct as73211_spec_dev_data as73211_spec = { + .intensity_scale = as73211_intensity_scale, + .channels = as73211_channels, + .num_channels = ARRAY_SIZE(as73211_channels), +}; + +static const struct as73211_spec_dev_data as7331_spec = { + .intensity_scale = as7331_intensity_scale, + .channels = as7331_channels, + .num_channels = ARRAY_SIZE(as7331_channels), +}; + static const struct of_device_id as73211_of_match[] = { - { .compatible = "ams,as73211" }, + { .compatible = "ams,as73211", &as73211_spec }, + { .compatible = "ams,as7331", &as7331_spec }, { } }; MODULE_DEVICE_TABLE(of, as73211_of_match); static const struct i2c_device_id as73211_id[] = { - { "as73211", 0 }, + { "as73211", (kernel_ulong_t)&as73211_spec }, + { "as7331", (kernel_ulong_t)&as7331_spec }, { } }; MODULE_DEVICE_TABLE(i2c, as73211_id); -- cgit v1.2.3 From a9058f287016f24c1d88acd062933424e623fa32 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Jan 2024 17:01:52 +0100 Subject: iio: accel: da280: Simplify id-matching da280_match_acpi_device() is a DIY version of acpi_device_get_match_data(), so it can be dropped. And things can be simplified further by using i2c_get_match_data() which will also check i2c_client_id style ids. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240104160152.304100-1-hdegoede@redhat.com Signed-off-by: Jonathan Cameron --- drivers/iio/accel/da280.c | 64 ++++++++++++++++++----------------------------- 1 file changed, 25 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/da280.c b/drivers/iio/accel/da280.c index 572bfe9694b0..756e2ea7c056 100644 --- a/drivers/iio/accel/da280.c +++ b/drivers/iio/accel/da280.c @@ -23,8 +23,6 @@ #define DA280_MODE_ENABLE 0x1e #define DA280_MODE_DISABLE 0x9e -enum da280_chipset { da217, da226, da280 }; - /* * a value of + or -4096 corresponds to + or - 1G * scale = 9.81 / 4096 = 0.002395019 @@ -47,6 +45,11 @@ static const struct iio_chan_spec da280_channels[] = { DA280_CHANNEL(DA280_REG_ACC_Z_LSB, Z), }; +struct da280_match_data { + const char *name; + int num_channels; +}; + struct da280_data { struct i2c_client *client; }; @@ -89,17 +92,6 @@ static const struct iio_info da280_info = { .read_raw = da280_read_raw, }; -static enum da280_chipset da280_match_acpi_device(struct device *dev) -{ - const struct acpi_device_id *id; - - id = acpi_match_device(dev->driver->acpi_match_table, dev); - if (!id) - return -EINVAL; - - return (enum da280_chipset) id->driver_data; -} - static void da280_disable(void *client) { da280_enable(client, false); @@ -107,16 +99,21 @@ static void da280_disable(void *client) static int da280_probe(struct i2c_client *client) { - const struct i2c_device_id *id = i2c_client_get_device_id(client); - int ret; + const struct da280_match_data *match_data; struct iio_dev *indio_dev; struct da280_data *data; - enum da280_chipset chip; + int ret; ret = i2c_smbus_read_byte_data(client, DA280_REG_CHIP_ID); if (ret != DA280_CHIP_ID) return (ret < 0) ? ret : -ENODEV; + match_data = i2c_get_match_data(client); + if (!match_data) { + dev_err(&client->dev, "Error match-data not set\n"); + return -EINVAL; + } + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; @@ -127,23 +124,8 @@ static int da280_probe(struct i2c_client *client) indio_dev->info = &da280_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = da280_channels; - - if (ACPI_HANDLE(&client->dev)) { - chip = da280_match_acpi_device(&client->dev); - } else { - chip = id->driver_data; - } - - if (chip == da217) { - indio_dev->name = "da217"; - indio_dev->num_channels = 3; - } else if (chip == da226) { - indio_dev->name = "da226"; - indio_dev->num_channels = 2; - } else { - indio_dev->name = "da280"; - indio_dev->num_channels = 3; - } + indio_dev->num_channels = match_data->num_channels; + indio_dev->name = match_data->name; ret = da280_enable(client, true); if (ret < 0) @@ -168,17 +150,21 @@ static int da280_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(da280_pm_ops, da280_suspend, da280_resume); +static const struct da280_match_data da217_match_data = { "da217", 3 }; +static const struct da280_match_data da226_match_data = { "da226", 2 }; +static const struct da280_match_data da280_match_data = { "da280", 3 }; + static const struct acpi_device_id da280_acpi_match[] = { - {"NSA2513", da217}, - {"MIRAACC", da280}, - {}, + { "NSA2513", (kernel_ulong_t)&da217_match_data }, + { "MIRAACC", (kernel_ulong_t)&da280_match_data }, + {} }; MODULE_DEVICE_TABLE(acpi, da280_acpi_match); static const struct i2c_device_id da280_i2c_id[] = { - { "da217", da217 }, - { "da226", da226 }, - { "da280", da280 }, + { "da217", (kernel_ulong_t)&da217_match_data }, + { "da226", (kernel_ulong_t)&da226_match_data }, + { "da280", (kernel_ulong_t)&da280_match_data }, {} }; MODULE_DEVICE_TABLE(i2c, da280_i2c_id); -- cgit v1.2.3 From 0ba6014a2317b8dae9e31cd293f6666c5172efe9 Mon Sep 17 00:00:00 2001 From: Mohammed Billoo Date: Sat, 6 Jan 2024 12:48:35 -0500 Subject: iio: adc: ti-ads1015: Use correct pga upper bound The devicetree binding and datasheets (for both the ADS1015 and ADS1115) show that the PGA index should have a maximum value of 5, and not 6. Signed-off-by: Mohammed Billoo Link: https://lore.kernel.org/r/20240106174836.1086714-1-mab.kernel@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-ads1015.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index 6799ea49dbc7..6ae967e4d8fa 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -925,7 +925,7 @@ static int ads1015_client_get_channels_config(struct i2c_client *client) if (!fwnode_property_read_u32(node, "ti,gain", &pval)) { pga = pval; - if (pga > 6) { + if (pga > 5) { dev_err(dev, "invalid gain on %pfw\n", node); fwnode_handle_put(node); return -EINVAL; -- cgit v1.2.3 From 9e65506ca9c7ff716c8441a33417820ad61d3a16 Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Fri, 29 Dec 2023 11:24:32 +0200 Subject: iio: pressure: mprls0025pa fix off-by-one enum Fix off-by-one error in transfer-function property. The honeywell,transfer-function property takes values between 1-3 so make sure the proper enum gets used. Fixes: 713337d9143ed ("iio: pressure: Honeywell mprls0025pa pressure sensor") Co-developed-by: Andreas Klinger Signed-off-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-5-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/mprls0025pa.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index 30fb2de36821..e3f0de020a40 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -323,6 +323,7 @@ static int mpr_probe(struct i2c_client *client) struct iio_dev *indio_dev; struct device *dev = &client->dev; s64 scale, offset; + u32 func; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) return dev_err_probe(dev, -EOPNOTSUPP, @@ -362,10 +363,11 @@ static int mpr_probe(struct i2c_client *client) return dev_err_probe(dev, ret, "honeywell,pmax-pascal could not be read\n"); ret = device_property_read_u32(dev, - "honeywell,transfer-function", &data->function); + "honeywell,transfer-function", &func); if (ret) return dev_err_probe(dev, ret, "honeywell,transfer-function could not be read\n"); + data->function = func - 1; if (data->function > MPR_FUNCTION_C) return dev_err_probe(dev, -EINVAL, "honeywell,transfer-function %d invalid\n", -- cgit v1.2.3 From 0a0fb0e63e5178905e9fdba8195686b4e2de26c4 Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Fri, 29 Dec 2023 11:24:33 +0200 Subject: iio: pressure: mprls0025pa improve driver error resilience Improve driver error resilience by ignoring the measurement if any of the 3 error flags gets set while interacting with the sensor. Based on the datasheet, in table 14 on page 14, the status byte contains: bit 5 busy flag - 1 if device is busy bit 2 memory integrity/error flag - 1 if integrity test failed bit 0 math saturation - 1 if internal math saturation has occurred Co-developed-by: Andreas Klinger Signed-off-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-6-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/mprls0025pa.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index e3f0de020a40..233cc1dc38ad 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -39,6 +39,8 @@ #define MPR_I2C_MEMORY BIT(2) /* integrity test passed */ #define MPR_I2C_MATH BIT(0) /* internal math saturation */ +#define MPR_I2C_ERR_FLAG (MPR_I2C_BUSY | MPR_I2C_MEMORY | MPR_I2C_MATH) + /* * support _RAW sysfs interface: * @@ -213,7 +215,7 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) status); return status; } - if (!(status & MPR_I2C_BUSY)) + if (!(status & MPR_I2C_ERR_FLAG)) break; } if (i == nloops) { @@ -233,7 +235,7 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) return -EIO; } - if (buf[0] & MPR_I2C_BUSY) { + if (buf[0] & MPR_I2C_ERR_FLAG) { /* * it should never be the case that status still indicates * business -- cgit v1.2.3 From b586b40e1952a343ae68142d16512f39596ca71b Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Fri, 29 Dec 2023 11:24:34 +0200 Subject: iio: pressure: mprls0025pa remove defaults This driver supports 32*3 combinations of fixed ranges and transfer functions, plus custom ranges. So statistically a user has more than 99% chance that the provided default configuration will generate invalid pressure readings if the bindings are not initialized and the driver is instantiated via sysfs. The current patch removes this loophole making sure the driver loads only if the firmware properties are present. Co-developed-by: Andreas Klinger Signed-off-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-7-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/mprls0025pa.c | 48 ++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index 233cc1dc38ad..e0a2a60c6245 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -353,34 +353,26 @@ static int mpr_probe(struct i2c_client *client) return dev_err_probe(dev, ret, "can't get and enable vdd supply\n"); - if (dev_fwnode(dev)) { - ret = device_property_read_u32(dev, "honeywell,pmin-pascal", - &data->pmin); - if (ret) - return dev_err_probe(dev, ret, - "honeywell,pmin-pascal could not be read\n"); - ret = device_property_read_u32(dev, "honeywell,pmax-pascal", - &data->pmax); - if (ret) - return dev_err_probe(dev, ret, - "honeywell,pmax-pascal could not be read\n"); - ret = device_property_read_u32(dev, - "honeywell,transfer-function", &func); - if (ret) - return dev_err_probe(dev, ret, - "honeywell,transfer-function could not be read\n"); - data->function = func - 1; - if (data->function > MPR_FUNCTION_C) - return dev_err_probe(dev, -EINVAL, - "honeywell,transfer-function %d invalid\n", - data->function); - } else { - /* when loaded as i2c device we need to use default values */ - dev_notice(dev, "firmware node not found; using defaults\n"); - data->pmin = 0; - data->pmax = 172369; /* 25 psi */ - data->function = MPR_FUNCTION_A; - } + ret = device_property_read_u32(dev, "honeywell,pmin-pascal", + &data->pmin); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,pmin-pascal could not be read\n"); + ret = device_property_read_u32(dev, "honeywell,pmax-pascal", + &data->pmax); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,pmax-pascal could not be read\n"); + ret = device_property_read_u32(dev, + "honeywell,transfer-function", &func); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,transfer-function could not be read\n"); + data->function = func - 1; + if (data->function > MPR_FUNCTION_C) + return dev_err_probe(dev, -EINVAL, + "honeywell,transfer-function %d invalid\n", + data->function); data->outmin = mpr_func_spec[data->function].output_min; data->outmax = mpr_func_spec[data->function].output_max; -- cgit v1.2.3 From 369cc90a020f1cbc5c08bd53a23fb0c69c4ec3df Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Fri, 29 Dec 2023 11:24:35 +0200 Subject: iio: pressure: mprls0025pa whitespace cleanup Fix indentation and whitespace in code that will not get refactored. Make URL inside comment copy-paste friendly. Co-developed-by: Andreas Klinger Signed-off-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-8-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/mprls0025pa.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index e0a2a60c6245..fef3ca69c4f0 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -5,10 +5,7 @@ * Copyright (c) Andreas Klinger * * Data sheet: - * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ - * products/sensors/pressure-sensors/board-mount-pressure-sensors/ - * micropressure-mpr-series/documents/ - * sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf * * 7-bit I2C default slave address: 0x18 */ @@ -84,9 +81,9 @@ struct mpr_func_spec { }; static const struct mpr_func_spec mpr_func_spec[] = { - [MPR_FUNCTION_A] = {.output_min = 1677722, .output_max = 15099494}, - [MPR_FUNCTION_B] = {.output_min = 419430, .output_max = 3774874}, - [MPR_FUNCTION_C] = {.output_min = 3355443, .output_max = 13421773}, + [MPR_FUNCTION_A] = { .output_min = 1677722, .output_max = 15099494 }, + [MPR_FUNCTION_B] = { .output_min = 419430, .output_max = 3774874 }, + [MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }, }; struct mpr_chan { @@ -273,7 +270,7 @@ static irqreturn_t mpr_trigger_handler(int irq, void *p) goto err; iio_push_to_buffers_with_timestamp(indio_dev, &data->chan, - iio_get_time_ns(indio_dev)); + iio_get_time_ns(indio_dev)); err: mutex_unlock(&data->lock); @@ -351,7 +348,7 @@ static int mpr_probe(struct i2c_client *client) ret = devm_regulator_get_enable(dev, "vdd"); if (ret) return dev_err_probe(dev, ret, - "can't get and enable vdd supply\n"); + "can't get and enable vdd supply\n"); ret = device_property_read_u32(dev, "honeywell,pmin-pascal", &data->pmin); @@ -379,42 +376,44 @@ static int mpr_probe(struct i2c_client *client) /* use 64 bit calculation for preserving a reasonable precision */ scale = div_s64(((s64)(data->pmax - data->pmin)) * NANO, - data->outmax - data->outmin); + data->outmax - data->outmin); data->scale = div_s64_rem(scale, NANO, &data->scale2); /* * multiply with NANO before dividing by scale and later divide by NANO * again. */ offset = ((-1LL) * (s64)data->outmin) * NANO - - div_s64(div_s64((s64)data->pmin * NANO, scale), NANO); + div_s64(div_s64((s64)data->pmin * NANO, scale), NANO); data->offset = div_s64_rem(offset, NANO, &data->offset2); if (data->irq > 0) { ret = devm_request_irq(dev, data->irq, mpr_eoc_handler, - IRQF_TRIGGER_RISING, client->name, data); + IRQF_TRIGGER_RISING, + client->name, + data); if (ret) return dev_err_probe(dev, ret, - "request irq %d failed\n", data->irq); + "request irq %d failed\n", data->irq); } data->gpiod_reset = devm_gpiod_get_optional(dev, "reset", - GPIOD_OUT_HIGH); + GPIOD_OUT_HIGH); if (IS_ERR(data->gpiod_reset)) return dev_err_probe(dev, PTR_ERR(data->gpiod_reset), - "request reset-gpio failed\n"); + "request reset-gpio failed\n"); mpr_reset(data); ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, - mpr_trigger_handler, NULL); + mpr_trigger_handler, NULL); if (ret) return dev_err_probe(dev, ret, - "iio triggered buffer setup failed\n"); + "iio triggered buffer setup failed\n"); ret = devm_iio_device_register(dev, indio_dev); if (ret) return dev_err_probe(dev, ret, - "unable to register iio device\n"); + "unable to register iio device\n"); return 0; } -- cgit v1.2.3 From 63cd31d320b50b7e004964c04ce3e73935cd3873 Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Fri, 29 Dec 2023 11:24:36 +0200 Subject: iio: pressure: mprls0025pa refactor to split core and i2c parts. Refactor driver by splitting the code into core and i2c. Seemingly redundant read/write function parameters are required for compatibility with the SPI driver. Co-developed-by: Andreas Klinger Signed-off-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-9-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- MAINTAINERS | 3 +- drivers/iio/pressure/Kconfig | 6 ++ drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/mprls0025pa.c | 185 ++++++++++----------------------- drivers/iio/pressure/mprls0025pa.h | 102 ++++++++++++++++++ drivers/iio/pressure/mprls0025pa_i2c.c | 100 ++++++++++++++++++ 6 files changed, 264 insertions(+), 133 deletions(-) create mode 100644 drivers/iio/pressure/mprls0025pa.h create mode 100644 drivers/iio/pressure/mprls0025pa_i2c.c (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index 8d1052fa6a69..e7deb25d24a5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9790,10 +9790,11 @@ F: drivers/iio/pressure/hsc030pa* HONEYWELL MPRLS0025PA PRESSURE SENSOR SERIES IIO DRIVER M: Andreas Klinger +M: Petre Rodan L: linux-iio@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml -F: drivers/iio/pressure/mprls0025pa.c +F: drivers/iio/pressure/mprls0025pa* HP BIOSCFG DRIVER M: Jorge Lopez diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 79adfd059c3a..f03007cfec85 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -182,6 +182,7 @@ config MPL3115 config MPRLS0025PA tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)" depends on I2C + select MPRLS0025PA_I2C if I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -192,6 +193,11 @@ config MPRLS0025PA To compile this driver as a module, choose M here: the module will be called mprls0025pa. +config MPRLS0025PA_I2C + tristate + depends on MPRLS0025PA + depends on I2C + config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" select IIO_BUFFER diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index b0f8b94662f2..7754135e190c 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_MPRLS0025PA) += mprls0025pa.o +obj-$(CONFIG_MPRLS0025PA_I2C) += mprls0025pa_i2c.o obj-$(CONFIG_MS5611) += ms5611_core.o obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index fef3ca69c4f0..ce20cf362fac 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -7,12 +7,11 @@ * Data sheet: * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf * - * 7-bit I2C default slave address: 0x18 */ -#include -#include -#include +#include +#include +#include #include #include #include @@ -22,7 +21,6 @@ #include #include -#include #include #include @@ -30,13 +28,15 @@ #include -/* bits in i2c status byte */ -#define MPR_I2C_POWER BIT(6) /* device is powered */ -#define MPR_I2C_BUSY BIT(5) /* device is busy */ -#define MPR_I2C_MEMORY BIT(2) /* integrity test passed */ -#define MPR_I2C_MATH BIT(0) /* internal math saturation */ +#include "mprls0025pa.h" -#define MPR_I2C_ERR_FLAG (MPR_I2C_BUSY | MPR_I2C_MEMORY | MPR_I2C_MATH) +/* bits in status byte */ +#define MPR_ST_POWER BIT(6) /* device is powered */ +#define MPR_ST_BUSY BIT(5) /* device is busy */ +#define MPR_ST_MEMORY BIT(2) /* integrity test passed */ +#define MPR_ST_MATH BIT(0) /* internal math saturation */ + +#define MPR_ST_ERR_FLAG (MPR_ST_BUSY | MPR_ST_MEMORY | MPR_ST_MATH) /* * support _RAW sysfs interface: @@ -69,12 +69,6 @@ * transfer function B: 2.5% to 22.5% of 2^24 * transfer function C: 20% to 80% of 2^24 */ -enum mpr_func_id { - MPR_FUNCTION_A, - MPR_FUNCTION_B, - MPR_FUNCTION_C, -}; - struct mpr_func_spec { u32 output_min; u32 output_max; @@ -86,45 +80,6 @@ static const struct mpr_func_spec mpr_func_spec[] = { [MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }, }; -struct mpr_chan { - s32 pres; /* pressure value */ - s64 ts; /* timestamp */ -}; - -struct mpr_data { - struct i2c_client *client; - struct mutex lock; /* - * access to device during read - */ - u32 pmin; /* minimal pressure in pascal */ - u32 pmax; /* maximal pressure in pascal */ - enum mpr_func_id function; /* transfer function */ - u32 outmin; /* - * minimal numerical range raw - * value from sensor - */ - u32 outmax; /* - * maximal numerical range raw - * value from sensor - */ - int scale; /* int part of scale */ - int scale2; /* nano part of scale */ - int offset; /* int part of offset */ - int offset2; /* nano part of offset */ - struct gpio_desc *gpiod_reset; /* reset */ - int irq; /* - * end of conversion irq; - * used to distinguish between - * irq mode and reading in a - * loop until data is ready - */ - struct completion completion; /* handshake from irq to read */ - struct mpr_chan chan; /* - * channel values for buffered - * mode - */ -}; - static const struct iio_chan_spec mpr_channels[] = { { .type = IIO_PRESSURE, @@ -152,11 +107,11 @@ static void mpr_reset(struct mpr_data *data) } /** - * mpr_read_pressure() - Read pressure value from sensor via I2C + * mpr_read_pressure() - Read pressure value from sensor * @data: Pointer to private data struct. * @press: Output value read from sensor. * - * Reading from the sensor by sending and receiving I2C telegrams. + * Reading from the sensor by sending and receiving telegrams. * * If there is an end of conversion (EOC) interrupt registered the function * waits for a maximum of one second for the interrupt. @@ -169,25 +124,17 @@ static void mpr_reset(struct mpr_data *data) */ static int mpr_read_pressure(struct mpr_data *data, s32 *press) { - struct device *dev = &data->client->dev; + struct device *dev = data->dev; int ret, i; - u8 wdata[] = {0xAA, 0x00, 0x00}; - s32 status; int nloops = 10; - u8 buf[4]; reinit_completion(&data->completion); - ret = i2c_master_send(data->client, wdata, sizeof(wdata)); + ret = data->ops->write(data, MPR_CMD_SYNC, MPR_PKT_SYNC_LEN); if (ret < 0) { dev_err(dev, "error while writing ret: %d\n", ret); return ret; } - if (ret != sizeof(wdata)) { - dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret, - (u32)sizeof(wdata)); - return -EIO; - } if (data->irq > 0) { ret = wait_for_completion_timeout(&data->completion, HZ); @@ -205,14 +152,14 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) * quite long */ usleep_range(5000, 10000); - status = i2c_smbus_read_byte(data->client); - if (status < 0) { + ret = data->ops->read(data, MPR_CMD_NOP, 1); + if (ret < 0) { dev_err(dev, "error while reading, status: %d\n", - status); - return status; + ret); + return ret; } - if (!(status & MPR_I2C_ERR_FLAG)) + if (!(data->buffer[0] & MPR_ST_ERR_FLAG)) break; } if (i == nloops) { @@ -221,29 +168,19 @@ static int mpr_read_pressure(struct mpr_data *data, s32 *press) } } - ret = i2c_master_recv(data->client, buf, sizeof(buf)); - if (ret < 0) { - dev_err(dev, "error in i2c_master_recv ret: %d\n", ret); + ret = data->ops->read(data, MPR_CMD_NOP, MPR_PKT_NOP_LEN); + if (ret < 0) return ret; - } - if (ret != sizeof(buf)) { - dev_err(dev, "received size doesn't fit - ret: %d / %u\n", ret, - (u32)sizeof(buf)); - return -EIO; - } - if (buf[0] & MPR_I2C_ERR_FLAG) { - /* - * it should never be the case that status still indicates - * business - */ - dev_err(dev, "data still not ready: %08x\n", buf[0]); + if (data->buffer[0] & MPR_ST_ERR_FLAG) { + dev_err(data->dev, + "unexpected status byte %02x\n", data->buffer[0]); return -ETIMEDOUT; } - *press = get_unaligned_be24(&buf[1]); + *press = get_unaligned_be24(&data->buffer[1]); - dev_dbg(dev, "received: %*ph cnt: %d\n", ret, buf, *press); + dev_dbg(dev, "received: %*ph cnt: %d\n", ret, data->buffer, *press); return 0; } @@ -315,26 +252,22 @@ static const struct iio_info mpr_info = { .read_raw = &mpr_read_raw, }; -static int mpr_probe(struct i2c_client *client) +int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq) { int ret; struct mpr_data *data; struct iio_dev *indio_dev; - struct device *dev = &client->dev; s64 scale, offset; u32 func; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) - return dev_err_probe(dev, -EOPNOTSUPP, - "I2C functionality not supported\n"); - indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) - return dev_err_probe(dev, -ENOMEM, "couldn't get iio_dev\n"); + return -ENOMEM; data = iio_priv(indio_dev); - data->client = client; - data->irq = client->irq; + data->dev = dev; + data->ops = ops; + data->irq = irq; mutex_init(&data->lock); init_completion(&data->completion); @@ -350,16 +283,10 @@ static int mpr_probe(struct i2c_client *client) return dev_err_probe(dev, ret, "can't get and enable vdd supply\n"); - ret = device_property_read_u32(dev, "honeywell,pmin-pascal", - &data->pmin); + ret = data->ops->init(data->dev); if (ret) - return dev_err_probe(dev, ret, - "honeywell,pmin-pascal could not be read\n"); - ret = device_property_read_u32(dev, "honeywell,pmax-pascal", - &data->pmax); - if (ret) - return dev_err_probe(dev, ret, - "honeywell,pmax-pascal could not be read\n"); + return ret; + ret = device_property_read_u32(dev, "honeywell,transfer-function", &func); if (ret) @@ -371,6 +298,21 @@ static int mpr_probe(struct i2c_client *client) "honeywell,transfer-function %d invalid\n", data->function); + ret = device_property_read_u32(dev, "honeywell,pmin-pascal", + &data->pmin); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,pmin-pascal could not be read\n"); + ret = device_property_read_u32(dev, "honeywell,pmax-pascal", + &data->pmax); + if (ret) + return dev_err_probe(dev, ret, + "honeywell,pmax-pascal could not be read\n"); + + if (data->pmin >= data->pmax) + return dev_err_probe(dev, -EINVAL, + "pressure limits are invalid\n"); + data->outmin = mpr_func_spec[data->function].output_min; data->outmax = mpr_func_spec[data->function].output_max; @@ -389,7 +331,7 @@ static int mpr_probe(struct i2c_client *client) if (data->irq > 0) { ret = devm_request_irq(dev, data->irq, mpr_eoc_handler, IRQF_TRIGGER_RISING, - client->name, + dev_name(dev), data); if (ret) return dev_err_probe(dev, ret, @@ -417,29 +359,8 @@ static int mpr_probe(struct i2c_client *client) return 0; } - -static const struct of_device_id mpr_matches[] = { - { .compatible = "honeywell,mprls0025pa" }, - { } -}; -MODULE_DEVICE_TABLE(of, mpr_matches); - -static const struct i2c_device_id mpr_id[] = { - { "mprls0025pa" }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mpr_id); - -static struct i2c_driver mpr_driver = { - .probe = mpr_probe, - .id_table = mpr_id, - .driver = { - .name = "mprls0025pa", - .of_match_table = mpr_matches, - }, -}; -module_i2c_driver(mpr_driver); +EXPORT_SYMBOL_NS(mpr_common_probe, IIO_HONEYWELL_MPRLS0025PA); MODULE_AUTHOR("Andreas Klinger "); -MODULE_DESCRIPTION("Honeywell MPRLS0025PA I2C driver"); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mprls0025pa.h b/drivers/iio/pressure/mprls0025pa.h new file mode 100644 index 000000000000..9d5c30afa9d6 --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver + * + * Copyright (c) Andreas Klinger + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#ifndef _MPRLS0025PA_H +#define _MPRLS0025PA_H + +#include +#include +#include +#include +#include +#include + +#include + +#define MPR_MEASUREMENT_RD_SIZE 4 +#define MPR_CMD_NOP 0xf0 +#define MPR_CMD_SYNC 0xaa +#define MPR_PKT_NOP_LEN MPR_MEASUREMENT_RD_SIZE +#define MPR_PKT_SYNC_LEN 3 + +struct device; + +struct iio_chan_spec; +struct iio_dev; + +struct mpr_data; +struct mpr_ops; + +/** + * struct mpr_chan + * @pres: pressure value + * @ts: timestamp + */ +struct mpr_chan { + s32 pres; + s64 ts; +}; + +enum mpr_func_id { + MPR_FUNCTION_A, + MPR_FUNCTION_B, + MPR_FUNCTION_C, +}; + +/** + * struct mpr_data + * @dev: current device structure + * @ops: functions that implement the sensor reads/writes, bus init + * @lock: access to device during read + * @pmin: minimal pressure in pascal + * @pmax: maximal pressure in pascal + * @function: transfer function + * @outmin: minimum raw pressure in counts (based on transfer function) + * @outmax: maximum raw pressure in counts (based on transfer function) + * @scale: pressure scale + * @scale2: pressure scale, decimal number + * @offset: pressure offset + * @offset2: pressure offset, decimal number + * @gpiod_reset: reset + * @irq: end of conversion irq. used to distinguish between irq mode and + * reading in a loop until data is ready + * @completion: handshake from irq to read + * @chan: channel values for buffered mode + * @buffer: raw conversion data + */ +struct mpr_data { + struct device *dev; + const struct mpr_ops *ops; + struct mutex lock; + u32 pmin; + u32 pmax; + enum mpr_func_id function; + u32 outmin; + u32 outmax; + int scale; + int scale2; + int offset; + int offset2; + struct gpio_desc *gpiod_reset; + int irq; + struct completion completion; + struct mpr_chan chan; + u8 buffer[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); +}; + +struct mpr_ops { + int (*init)(struct device *dev); + int (*read)(struct mpr_data *data, const u8 cmd, const u8 cnt); + int (*write)(struct mpr_data *data, const u8 cmd, const u8 cnt); +}; + +int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq); + +#endif diff --git a/drivers/iio/pressure/mprls0025pa_i2c.c b/drivers/iio/pressure/mprls0025pa_i2c.c new file mode 100644 index 000000000000..7a5c5aa2b456 --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa_i2c.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPRLS0025PA - Honeywell MicroPressure pressure sensor series driver + * + * Copyright (c) Andreas Klinger + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#include +#include +#include +#include +#include +#include + +#include "mprls0025pa.h" + +static int mpr_i2c_init(struct device *unused) +{ + return 0; +} + +static int mpr_i2c_read(struct mpr_data *data, const u8 unused, const u8 cnt) +{ + int ret; + struct i2c_client *client = to_i2c_client(data->dev); + + if (cnt > MPR_MEASUREMENT_RD_SIZE) + return -EOVERFLOW; + + memset(data->buffer, 0, MPR_MEASUREMENT_RD_SIZE); + ret = i2c_master_recv(client, data->buffer, cnt); + if (ret < 0) + return ret; + else if (ret != cnt) + return -EIO; + + return 0; +} + +static int mpr_i2c_write(struct mpr_data *data, const u8 cmd, const u8 unused) +{ + int ret; + struct i2c_client *client = to_i2c_client(data->dev); + u8 wdata[MPR_PKT_SYNC_LEN]; + + memset(wdata, 0, sizeof(wdata)); + wdata[0] = cmd; + + ret = i2c_master_send(client, wdata, MPR_PKT_SYNC_LEN); + if (ret < 0) + return ret; + else if (ret != MPR_PKT_SYNC_LEN) + return -EIO; + + return 0; +} + +static const struct mpr_ops mpr_i2c_ops = { + .init = mpr_i2c_init, + .read = mpr_i2c_read, + .write = mpr_i2c_write, +}; + +static int mpr_i2c_probe(struct i2c_client *client) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) + return -EOPNOTSUPP; + + return mpr_common_probe(&client->dev, &mpr_i2c_ops, client->irq); +} + +static const struct of_device_id mpr_i2c_match[] = { + { .compatible = "honeywell,mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(of, mpr_i2c_match); + +static const struct i2c_device_id mpr_i2c_id[] = { + { "mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, mpr_i2c_id); + +static struct i2c_driver mpr_i2c_driver = { + .probe = mpr_i2c_probe, + .id_table = mpr_i2c_id, + .driver = { + .name = "mprls0025pa", + .of_match_table = mpr_i2c_match, + }, +}; +module_i2c_driver(mpr_i2c_driver); + +MODULE_AUTHOR("Andreas Klinger "); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor i2c driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA); -- cgit v1.2.3 From d8fd0449e2208407a2f4b191b6d4161203c50f0c Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Fri, 29 Dec 2023 11:24:37 +0200 Subject: iio: pressure: mprls0025pa add triplet property Add honeywell,pressure-triplet property that automatically initializes pmin-pascal, pmax-pascal so that the user is not required to look-up the chip in the datasheet and convert various units to pascals himself. Co-developed-by: Andreas Klinger Signed-off-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-10-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/mprls0025pa.c | 105 ++++++++++++++++++++++++++++++++++--- 1 file changed, 97 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/mprls0025pa.c b/drivers/iio/pressure/mprls0025pa.c index ce20cf362fac..33a15d4c642c 100644 --- a/drivers/iio/pressure/mprls0025pa.c +++ b/drivers/iio/pressure/mprls0025pa.c @@ -80,6 +80,78 @@ static const struct mpr_func_spec mpr_func_spec[] = { [MPR_FUNCTION_C] = { .output_min = 3355443, .output_max = 13421773 }, }; +enum mpr_variants { + MPR0001BA = 0x00, MPR01_6BA = 0x01, MPR02_5BA = 0x02, MPR0060MG = 0x03, + MPR0100MG = 0x04, MPR0160MG = 0x05, MPR0250MG = 0x06, MPR0400MG = 0x07, + MPR0600MG = 0x08, MPR0001BG = 0x09, MPR01_6BG = 0x0a, MPR02_5BG = 0x0b, + MPR0100KA = 0x0c, MPR0160KA = 0x0d, MPR0250KA = 0x0e, MPR0006KG = 0x0f, + MPR0010KG = 0x10, MPR0016KG = 0x11, MPR0025KG = 0x12, MPR0040KG = 0x13, + MPR0060KG = 0x14, MPR0100KG = 0x15, MPR0160KG = 0x16, MPR0250KG = 0x17, + MPR0015PA = 0x18, MPR0025PA = 0x19, MPR0030PA = 0x1a, MPR0001PG = 0x1b, + MPR0005PG = 0x1c, MPR0015PG = 0x1d, MPR0030PG = 0x1e, MPR0300YG = 0x1f, + MPR_VARIANTS_MAX +}; + +static const char * const mpr_triplet_variants[MPR_VARIANTS_MAX] = { + [MPR0001BA] = "0001BA", [MPR01_6BA] = "01.6BA", [MPR02_5BA] = "02.5BA", + [MPR0060MG] = "0060MG", [MPR0100MG] = "0100MG", [MPR0160MG] = "0160MG", + [MPR0250MG] = "0250MG", [MPR0400MG] = "0400MG", [MPR0600MG] = "0600MG", + [MPR0001BG] = "0001BG", [MPR01_6BG] = "01.6BG", [MPR02_5BG] = "02.5BG", + [MPR0100KA] = "0100KA", [MPR0160KA] = "0160KA", [MPR0250KA] = "0250KA", + [MPR0006KG] = "0006KG", [MPR0010KG] = "0010KG", [MPR0016KG] = "0016KG", + [MPR0025KG] = "0025KG", [MPR0040KG] = "0040KG", [MPR0060KG] = "0060KG", + [MPR0100KG] = "0100KG", [MPR0160KG] = "0160KG", [MPR0250KG] = "0250KG", + [MPR0015PA] = "0015PA", [MPR0025PA] = "0025PA", [MPR0030PA] = "0030PA", + [MPR0001PG] = "0001PG", [MPR0005PG] = "0005PG", [MPR0015PG] = "0015PG", + [MPR0030PG] = "0030PG", [MPR0300YG] = "0300YG" +}; + +/** + * struct mpr_range_config - list of pressure ranges based on nomenclature + * @pmin: lowest pressure that can be measured + * @pmax: highest pressure that can be measured + */ +struct mpr_range_config { + const s32 pmin; + const s32 pmax; +}; + +/* All min max limits have been converted to pascals */ +static const struct mpr_range_config mpr_range_config[MPR_VARIANTS_MAX] = { + [MPR0001BA] = { .pmin = 0, .pmax = 100000 }, + [MPR01_6BA] = { .pmin = 0, .pmax = 160000 }, + [MPR02_5BA] = { .pmin = 0, .pmax = 250000 }, + [MPR0060MG] = { .pmin = 0, .pmax = 6000 }, + [MPR0100MG] = { .pmin = 0, .pmax = 10000 }, + [MPR0160MG] = { .pmin = 0, .pmax = 16000 }, + [MPR0250MG] = { .pmin = 0, .pmax = 25000 }, + [MPR0400MG] = { .pmin = 0, .pmax = 40000 }, + [MPR0600MG] = { .pmin = 0, .pmax = 60000 }, + [MPR0001BG] = { .pmin = 0, .pmax = 100000 }, + [MPR01_6BG] = { .pmin = 0, .pmax = 160000 }, + [MPR02_5BG] = { .pmin = 0, .pmax = 250000 }, + [MPR0100KA] = { .pmin = 0, .pmax = 100000 }, + [MPR0160KA] = { .pmin = 0, .pmax = 160000 }, + [MPR0250KA] = { .pmin = 0, .pmax = 250000 }, + [MPR0006KG] = { .pmin = 0, .pmax = 6000 }, + [MPR0010KG] = { .pmin = 0, .pmax = 10000 }, + [MPR0016KG] = { .pmin = 0, .pmax = 16000 }, + [MPR0025KG] = { .pmin = 0, .pmax = 25000 }, + [MPR0040KG] = { .pmin = 0, .pmax = 40000 }, + [MPR0060KG] = { .pmin = 0, .pmax = 60000 }, + [MPR0100KG] = { .pmin = 0, .pmax = 100000 }, + [MPR0160KG] = { .pmin = 0, .pmax = 160000 }, + [MPR0250KG] = { .pmin = 0, .pmax = 250000 }, + [MPR0015PA] = { .pmin = 0, .pmax = 103421 }, + [MPR0025PA] = { .pmin = 0, .pmax = 172369 }, + [MPR0030PA] = { .pmin = 0, .pmax = 206843 }, + [MPR0001PG] = { .pmin = 0, .pmax = 6895 }, + [MPR0005PG] = { .pmin = 0, .pmax = 34474 }, + [MPR0015PG] = { .pmin = 0, .pmax = 103421 }, + [MPR0030PG] = { .pmin = 0, .pmax = 206843 }, + [MPR0300YG] = { .pmin = 0, .pmax = 39997 } +}; + static const struct iio_chan_spec mpr_channels[] = { { .type = IIO_PRESSURE, @@ -257,6 +329,7 @@ int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq) int ret; struct mpr_data *data; struct iio_dev *indio_dev; + const char *triplet; s64 scale, offset; u32 func; @@ -298,16 +371,32 @@ int mpr_common_probe(struct device *dev, const struct mpr_ops *ops, int irq) "honeywell,transfer-function %d invalid\n", data->function); - ret = device_property_read_u32(dev, "honeywell,pmin-pascal", - &data->pmin); - if (ret) - return dev_err_probe(dev, ret, + ret = device_property_read_string(dev, "honeywell,pressure-triplet", + &triplet); + if (ret) { + ret = device_property_read_u32(dev, "honeywell,pmin-pascal", + &data->pmin); + if (ret) + return dev_err_probe(dev, ret, "honeywell,pmin-pascal could not be read\n"); - ret = device_property_read_u32(dev, "honeywell,pmax-pascal", - &data->pmax); - if (ret) - return dev_err_probe(dev, ret, + + ret = device_property_read_u32(dev, "honeywell,pmax-pascal", + &data->pmax); + if (ret) + return dev_err_probe(dev, ret, "honeywell,pmax-pascal could not be read\n"); + } else { + ret = device_property_match_property_string(dev, + "honeywell,pressure-triplet", + mpr_triplet_variants, + MPR_VARIANTS_MAX); + if (ret < 0) + return dev_err_probe(dev, -EINVAL, + "honeywell,pressure-triplet is invalid\n"); + + data->pmin = mpr_range_config[ret].pmin; + data->pmax = mpr_range_config[ret].pmax; + } if (data->pmin >= data->pmax) return dev_err_probe(dev, -EINVAL, -- cgit v1.2.3 From a0858f0cd28e822b91376ae288d5548bc1847531 Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Fri, 29 Dec 2023 11:24:38 +0200 Subject: iio: pressure: mprls0025pa add SPI driver Add SPI component of the driver. Tested-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-11-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/Kconfig | 8 ++- drivers/iio/pressure/Makefile | 1 + drivers/iio/pressure/mprls0025pa_spi.c | 92 ++++++++++++++++++++++++++++++++++ 3 files changed, 100 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/pressure/mprls0025pa_spi.c (limited to 'drivers') diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index f03007cfec85..5da7931dc537 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -181,8 +181,9 @@ config MPL3115 config MPRLS0025PA tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)" - depends on I2C + depends on (I2C || SPI_MASTER) select MPRLS0025PA_I2C if I2C + select MPRLS0025PA_SPI if SPI_MASTER select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -198,6 +199,11 @@ config MPRLS0025PA_I2C depends on MPRLS0025PA depends on I2C +config MPRLS0025PA_SPI + tristate + depends on MPRLS0025PA + depends on SPI_MASTER + config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" select IIO_BUFFER diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 7754135e190c..a93709e35760 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_MPRLS0025PA) += mprls0025pa.o obj-$(CONFIG_MPRLS0025PA_I2C) += mprls0025pa_i2c.o +obj-$(CONFIG_MPRLS0025PA_SPI) += mprls0025pa_spi.o obj-$(CONFIG_MS5611) += ms5611_core.o obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o diff --git a/drivers/iio/pressure/mprls0025pa_spi.c b/drivers/iio/pressure/mprls0025pa_spi.c new file mode 100644 index 000000000000..3aed14cd95c5 --- /dev/null +++ b/drivers/iio/pressure/mprls0025pa_spi.c @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MPRLS0025PA - Honeywell MicroPressure MPR series SPI sensor driver + * + * Copyright (c) 2024 Petre Rodan + * + * Data sheet: + * https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "mprls0025pa.h" + +struct mpr_spi_buf { + u8 tx[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); +}; + +static int mpr_spi_init(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpr_spi_buf *buf; + + buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_set_drvdata(spi, buf); + + return 0; +} + +static int mpr_spi_xfer(struct mpr_data *data, const u8 cmd, const u8 pkt_len) +{ + struct spi_device *spi = to_spi_device(data->dev); + struct mpr_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer; + + if (pkt_len > MPR_MEASUREMENT_RD_SIZE) + return -EOVERFLOW; + + buf->tx[0] = cmd; + xfer.tx_buf = buf->tx; + xfer.rx_buf = data->buffer; + xfer.len = pkt_len; + + return spi_sync_transfer(spi, &xfer, 1); +} + +static const struct mpr_ops mpr_spi_ops = { + .init = mpr_spi_init, + .read = mpr_spi_xfer, + .write = mpr_spi_xfer, +}; + +static int mpr_spi_probe(struct spi_device *spi) +{ + return mpr_common_probe(&spi->dev, &mpr_spi_ops, spi->irq); +} + +static const struct of_device_id mpr_spi_match[] = { + { .compatible = "honeywell,mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(of, mpr_spi_match); + +static const struct spi_device_id mpr_spi_id[] = { + { "mprls0025pa" }, + {} +}; +MODULE_DEVICE_TABLE(spi, mpr_spi_id); + +static struct spi_driver mpr_spi_driver = { + .driver = { + .name = "mprls0025pa", + .of_match_table = mpr_spi_match, + }, + .probe = mpr_spi_probe, + .id_table = mpr_spi_id, +}; +module_spi_driver(mpr_spi_driver); + +MODULE_AUTHOR("Petre Rodan "); +MODULE_DESCRIPTION("Honeywell MPR pressure sensor spi driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA); -- cgit v1.2.3 From e91847646081a4096173d43481577939ad054e88 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:51 +0000 Subject: iio: accel: da280: Stop using ACPI_PTR() In general using ACPI_PTR() leads to more fragile code for a very minor saving in storage in the case of !CONFIG_ACPI so in IIO we prefer not to use it if the only ACPI specific code is the acpi_device_id table. In this case will also suppress a unused variable warning. Reported-by: kernel test robot Link: https://lore.kernel.org/oe-kbuild-all/202302142222.vVU0E4eu-lkp@intel.com/ Cc: Hans de Goede Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-2-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/da280.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/da280.c b/drivers/iio/accel/da280.c index 756e2ea7c056..992286828844 100644 --- a/drivers/iio/accel/da280.c +++ b/drivers/iio/accel/da280.c @@ -172,7 +172,7 @@ MODULE_DEVICE_TABLE(i2c, da280_i2c_id); static struct i2c_driver da280_driver = { .driver = { .name = "da280", - .acpi_match_table = ACPI_PTR(da280_acpi_match), + .acpi_match_table = da280_acpi_match, .pm = pm_sleep_ptr(&da280_pm_ops), }, .probe = da280_probe, -- cgit v1.2.3 From ab3764c77560a8cd1b2b22500494a7951f277522 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:52 +0000 Subject: iio: accel: kxcjk-1013: Move acpi_device_id table under ifdef CONFIG_ACPI This avoids a build warning due to the use of ACPI_PTR(). Given the driver already has APCI specific code under CONFIG_ACPI move the table rather than removing the ACPI_PTR() call as we already have the complexity of CONFIG_ACPI. Dropped a pointless comma after {} terminator whilst moving the code. Cc: Hans de Goede Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-3-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxcjk-1013.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 894709286b0c..c5f5b1ce7954 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -422,6 +422,23 @@ static int kiox010a_dsm(struct device *dev, int fn_index) ACPI_FREE(obj); return 0; } + +static const struct acpi_device_id kx_acpi_match[] = { + {"KXCJ1013", KXCJK1013}, + {"KXCJ1008", KXCJ91008}, + {"KXCJ9000", KXCJ91008}, + {"KIOX0008", KXCJ91008}, + {"KIOX0009", KXTJ21009}, + {"KIOX000A", KXCJ91008}, + {"KIOX010A", KXCJ91008}, /* KXCJ91008 in the display of a yoga 2-in-1 */ + {"KIOX020A", KXCJ91008}, /* KXCJ91008 in the base of a yoga 2-in-1 */ + {"KXTJ1009", KXTJ21009}, + {"KXJ2109", KXTJ21009}, + {"SMO8500", KXCJ91008}, + { } +}; +MODULE_DEVICE_TABLE(acpi, kx_acpi_match); + #endif static int kxcjk1013_set_mode(struct kxcjk1013_data *data, @@ -1687,22 +1704,6 @@ static const struct dev_pm_ops kxcjk1013_pm_ops = { kxcjk1013_runtime_resume, NULL) }; -static const struct acpi_device_id kx_acpi_match[] = { - {"KXCJ1013", KXCJK1013}, - {"KXCJ1008", KXCJ91008}, - {"KXCJ9000", KXCJ91008}, - {"KIOX0008", KXCJ91008}, - {"KIOX0009", KXTJ21009}, - {"KIOX000A", KXCJ91008}, - {"KIOX010A", KXCJ91008}, /* KXCJ91008 in the display of a yoga 2-in-1 */ - {"KIOX020A", KXCJ91008}, /* KXCJ91008 in the base of a yoga 2-in-1 */ - {"KXTJ1009", KXTJ21009}, - {"KXJ2109", KXTJ21009}, - {"SMO8500", KXCJ91008}, - { }, -}; -MODULE_DEVICE_TABLE(acpi, kx_acpi_match); - static const struct i2c_device_id kxcjk1013_id[] = { {"kxcjk1013", KXCJK1013}, {"kxcj91008", KXCJ91008}, -- cgit v1.2.3 From 9b397c11e04adb86b8bbf2bd969ef6fad005f1ab Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:53 +0000 Subject: iio: accel: mma9551: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Whilst here tidy up a trivial bit of unusual indentation. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-4-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9551.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c index d823f2edc6d4..083c08f65baf 100644 --- a/drivers/iio/accel/mma9551.c +++ b/drivers/iio/accel/mma9551.c @@ -604,9 +604,9 @@ MODULE_DEVICE_TABLE(i2c, mma9551_id); static struct i2c_driver mma9551_driver = { .driver = { .name = MMA9551_DRV_NAME, - .acpi_match_table = ACPI_PTR(mma9551_acpi_match), + .acpi_match_table = mma9551_acpi_match, .pm = pm_ptr(&mma9551_pm_ops), - }, + }, .probe = mma9551_probe, .remove = mma9551_remove, .id_table = mma9551_id, -- cgit v1.2.3 From 3572c3700ebd4e73da0ac236f573e53294414d31 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:54 +0000 Subject: iio: accel: mma9553: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Whilst here tidy up a trivial bit of unusual indentation. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-5-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mma9553.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c index d01aba4aecba..3cbd0fd4e624 100644 --- a/drivers/iio/accel/mma9553.c +++ b/drivers/iio/accel/mma9553.c @@ -1243,9 +1243,9 @@ MODULE_DEVICE_TABLE(i2c, mma9553_id); static struct i2c_driver mma9553_driver = { .driver = { .name = MMA9553_DRV_NAME, - .acpi_match_table = ACPI_PTR(mma9553_acpi_match), + .acpi_match_table = mma9553_acpi_match, .pm = pm_ptr(&mma9553_pm_ops), - }, + }, .probe = mma9553_probe, .remove = mma9553_remove, .id_table = mma9553_id, -- cgit v1.2.3 From a55c3fec3bf6710b0f43252c4954d2df3ecd48a6 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:55 +0000 Subject: iio: accel: mxc4005: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311181952.1usxCcup-lkp@intel.com/ Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-6-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mxc4005.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 82e8d0b39049..8118cc13614a 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -8,7 +8,7 @@ #include #include #include -#include +#include #include #include #include @@ -493,7 +493,7 @@ MODULE_DEVICE_TABLE(i2c, mxc4005_id); static struct i2c_driver mxc4005_driver = { .driver = { .name = MXC4005_DRV_NAME, - .acpi_match_table = ACPI_PTR(mxc4005_acpi_match), + .acpi_match_table = mxc4005_acpi_match, .of_match_table = mxc4005_of_match, }, .probe = mxc4005_probe, -- cgit v1.2.3 From 39d76808a80a8b03a96151a9b7fddd76e386bbd9 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:56 +0000 Subject: iio: accel: mxc6255: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reported-by: kernel test robot Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-7-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mxc6255.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/mxc6255.c b/drivers/iio/accel/mxc6255.c index 33c2253561e6..ac228128c4f9 100644 --- a/drivers/iio/accel/mxc6255.c +++ b/drivers/iio/accel/mxc6255.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include @@ -181,7 +181,7 @@ MODULE_DEVICE_TABLE(i2c, mxc6255_id); static struct i2c_driver mxc6255_driver = { .driver = { .name = MXC6255_DRV_NAME, - .acpi_match_table = ACPI_PTR(mxc6255_acpi_match), + .acpi_match_table = mxc6255_acpi_match, }, .probe = mxc6255_probe, .id_table = mxc6255_id, -- cgit v1.2.3 From 095f3ed5833f55ae3f712b0dcc1bf58d2e03871d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:57 +0000 Subject: iio: accel: stk8ba50: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-8-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/stk8ba50.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/stk8ba50.c b/drivers/iio/accel/stk8ba50.c index 3415ac1b4495..668edc88c89d 100644 --- a/drivers/iio/accel/stk8ba50.c +++ b/drivers/iio/accel/stk8ba50.c @@ -7,11 +7,11 @@ * STK8BA50 7-bit I2C address: 0x18. */ -#include #include #include #include #include +#include #include #include #include @@ -541,7 +541,7 @@ static struct i2c_driver stk8ba50_driver = { .driver = { .name = "stk8ba50", .pm = pm_sleep_ptr(&stk8ba50_pm_ops), - .acpi_match_table = ACPI_PTR(stk8ba50_acpi_id), + .acpi_match_table = stk8ba50_acpi_id, }, .probe = stk8ba50_probe, .remove = stk8ba50_remove, -- cgit v1.2.3 From 3b63f5e8f78b0e7c1ebaf47ce192003a67d81c82 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:58 +0000 Subject: iio: accel: bmc150: Drop ACPI_PTR() In general the complexity of avoiding maybe unused variable warnings is not worth dealing with for the small amount of data saved. In thie case, the i2c driver does include some other code under a CONFIG_ACPI guard but remove the ACPI_PTR() usage anyway to bring keep it inline with the spi driver. Drop include of linux/acpi.h in the spi driver that doesn't need it as struct acpi_device_id is defined in mod_devicetable.h which is already included. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-9-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel-i2c.c | 2 +- drivers/iio/accel/bmc150-accel-spi.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c index ee1ba134ad42..f08594b372cf 100644 --- a/drivers/iio/accel/bmc150-accel-i2c.c +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -266,7 +266,7 @@ static struct i2c_driver bmc150_accel_driver = { .driver = { .name = "bmc150_accel_i2c", .of_match_table = bmc150_accel_of_match, - .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match), + .acpi_match_table = bmc150_accel_acpi_match, .pm = &bmc150_accel_pm_ops, }, .probe = bmc150_accel_probe, diff --git a/drivers/iio/accel/bmc150-accel-spi.c b/drivers/iio/accel/bmc150-accel-spi.c index 921fb46be0b8..a6b9f599eb7b 100644 --- a/drivers/iio/accel/bmc150-accel-spi.c +++ b/drivers/iio/accel/bmc150-accel-spi.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #include @@ -70,7 +69,7 @@ MODULE_DEVICE_TABLE(spi, bmc150_accel_id); static struct spi_driver bmc150_accel_driver = { .driver = { .name = "bmc150_accel_spi", - .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match), + .acpi_match_table = bmc150_accel_acpi_match, .pm = &bmc150_accel_pm_ops, }, .probe = bmc150_accel_probe, -- cgit v1.2.3 From fa9ab814e8e40cf9428d5ea46e2da09e3127561a Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:34:59 +0000 Subject: iio: gyro: bmg160: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Cc: Mike Looijmans Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-10-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/gyro/bmg160_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c index 2f9675596138..9c8e20c25e96 100644 --- a/drivers/iio/gyro/bmg160_i2c.c +++ b/drivers/iio/gyro/bmg160_i2c.c @@ -3,7 +3,7 @@ #include #include #include -#include +#include #include "bmg160.h" @@ -66,7 +66,7 @@ MODULE_DEVICE_TABLE(of, bmg160_of_match); static struct i2c_driver bmg160_i2c_driver = { .driver = { .name = "bmg160_i2c", - .acpi_match_table = ACPI_PTR(bmg160_acpi_match), + .acpi_match_table = bmg160_acpi_match, .of_match_table = bmg160_of_match, .pm = &bmg160_pm_ops, }, -- cgit v1.2.3 From 3049e64036d71f4e248beee94de26d47e64f05e6 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:00 +0000 Subject: iio: humidity: hts221: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-11-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hts221_i2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/hts221_i2c.c b/drivers/iio/humidity/hts221_i2c.c index 30f2068ea156..5cb263e0ef5a 100644 --- a/drivers/iio/humidity/hts221_i2c.c +++ b/drivers/iio/humidity/hts221_i2c.c @@ -9,7 +9,7 @@ #include #include -#include +#include #include #include #include @@ -63,7 +63,7 @@ static struct i2c_driver hts221_driver = { .name = "hts221_i2c", .pm = pm_sleep_ptr(&hts221_pm_ops), .of_match_table = hts221_i2c_of_match, - .acpi_match_table = ACPI_PTR(hts221_acpi_match), + .acpi_match_table = hts221_acpi_match, }, .probe = hts221_i2c_probe, .id_table = hts221_i2c_id_table, -- cgit v1.2.3 From 37b1ea30651ad80af158625250558851f4510f2e Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:01 +0000 Subject: iio: imu: fxos8700: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Drop unused acpi.h include. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311231427.vEQAuxvI-lkp@intel.com/ Cc: Carlos Song Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-12-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/imu/fxos8700_i2c.c | 3 +-- drivers/iio/imu/fxos8700_spi.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/fxos8700_i2c.c b/drivers/iio/imu/fxos8700_i2c.c index 2ace306d0f9a..e99677ad96a2 100644 --- a/drivers/iio/imu/fxos8700_i2c.c +++ b/drivers/iio/imu/fxos8700_i2c.c @@ -10,7 +10,6 @@ * 1 | 0 | 0x1C * 1 | 1 | 0x1F */ -#include #include #include #include @@ -57,7 +56,7 @@ MODULE_DEVICE_TABLE(of, fxos8700_of_match); static struct i2c_driver fxos8700_i2c_driver = { .driver = { .name = "fxos8700_i2c", - .acpi_match_table = ACPI_PTR(fxos8700_acpi_match), + .acpi_match_table = fxos8700_acpi_match, .of_match_table = fxos8700_of_match, }, .probe = fxos8700_i2c_probe, diff --git a/drivers/iio/imu/fxos8700_spi.c b/drivers/iio/imu/fxos8700_spi.c index 27e694cce173..6b0dc7a776b9 100644 --- a/drivers/iio/imu/fxos8700_spi.c +++ b/drivers/iio/imu/fxos8700_spi.c @@ -2,7 +2,6 @@ /* * FXOS8700 - NXP IMU, SPI bits */ -#include #include #include #include @@ -46,7 +45,7 @@ static struct spi_driver fxos8700_spi_driver = { .probe = fxos8700_spi_probe, .id_table = fxos8700_spi_id, .driver = { - .acpi_match_table = ACPI_PTR(fxos8700_acpi_match), + .acpi_match_table = fxos8700_acpi_match, .of_match_table = fxos8700_of_match, .name = "fxos8700_spi", }, -- cgit v1.2.3 From 3460cb9c6b86193b23f8bae4650f9fe9d0389f04 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:02 +0000 Subject: iio: imu: kmx61: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-13-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/imu/kmx61.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c index 958167b31241..7d3e061f3046 100644 --- a/drivers/iio/imu/kmx61.c +++ b/drivers/iio/imu/kmx61.c @@ -1514,7 +1514,7 @@ MODULE_DEVICE_TABLE(i2c, kmx61_id); static struct i2c_driver kmx61_driver = { .driver = { .name = KMX61_DRV_NAME, - .acpi_match_table = ACPI_PTR(kmx61_acpi_match), + .acpi_match_table = kmx61_acpi_match, .pm = pm_ptr(&kmx61_pm_ops), }, .probe = kmx61_probe, -- cgit v1.2.3 From cc4ac27b4ac9076a384a78b773e75fc0c852bff9 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:03 +0000 Subject: iio: light: jsa1212: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-14-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/jsa1212.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c index 37e2807041a1..869196746045 100644 --- a/drivers/iio/light/jsa1212.c +++ b/drivers/iio/light/jsa1212.c @@ -12,10 +12,10 @@ #include #include #include +#include #include #include #include -#include #include #include #include @@ -438,7 +438,7 @@ static struct i2c_driver jsa1212_driver = { .driver = { .name = JSA1212_DRIVER_NAME, .pm = pm_sleep_ptr(&jsa1212_pm_ops), - .acpi_match_table = ACPI_PTR(jsa1212_acpi_match), + .acpi_match_table = jsa1212_acpi_match, }, .probe = jsa1212_probe, .remove = jsa1212_remove, -- cgit v1.2.3 From 730697c1915ce2e58aa05ab4f87de73a404d9b65 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:04 +0000 Subject: iio: light: ltr501: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Include linux/mod_devicetable.h which includes the definition of struct acpi_device_id (hence somewhat related to the main change) Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-15-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/ltr501.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c index 061c122fdc5e..8c516ede9116 100644 --- a/drivers/iio/light/ltr501.c +++ b/drivers/iio/light/ltr501.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include @@ -1639,7 +1640,7 @@ static struct i2c_driver ltr501_driver = { .name = LTR501_DRV_NAME, .of_match_table = ltr501_of_match, .pm = pm_sleep_ptr(<r501_pm_ops), - .acpi_match_table = ACPI_PTR(ltr_acpi_match), + .acpi_match_table = ltr_acpi_match, }, .probe = ltr501_probe, .remove = ltr501_remove, -- cgit v1.2.3 From 944ea6c36454c22f91e797f0f878776a4d7f8b43 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:05 +0000 Subject: iio: light: rpr0521: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-16-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/rpr0521.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/rpr0521.c b/drivers/iio/light/rpr0521.c index bbb8581622f2..40d5732b5e32 100644 --- a/drivers/iio/light/rpr0521.c +++ b/drivers/iio/light/rpr0521.c @@ -10,11 +10,11 @@ */ #include +#include #include #include #include #include -#include #include #include @@ -1119,7 +1119,7 @@ static struct i2c_driver rpr0521_driver = { .driver = { .name = RPR0521_DRV_NAME, .pm = pm_ptr(&rpr0521_pm_ops), - .acpi_match_table = ACPI_PTR(rpr0521_acpi_match), + .acpi_match_table = rpr0521_acpi_match, }, .probe = rpr0521_probe, .remove = rpr0521_remove, -- cgit v1.2.3 From 8b6522c614208e4b6201f373f55b7dd41bf3c5ea Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:06 +0000 Subject: iio: light: stk3310: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reported-by: kernel test robot Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-17-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/stk3310.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c index 72b08d870d33..7b71ad71d78d 100644 --- a/drivers/iio/light/stk3310.c +++ b/drivers/iio/light/stk3310.c @@ -7,11 +7,11 @@ * IIO driver for STK3310/STK3311. 7-bit I2C address: 0x48. */ -#include #include #include #include #include +#include #include #include #include @@ -712,7 +712,7 @@ static struct i2c_driver stk3310_driver = { .name = "stk3310", .of_match_table = stk3310_of_match, .pm = pm_sleep_ptr(&stk3310_pm_ops), - .acpi_match_table = ACPI_PTR(stk3310_acpi_id), + .acpi_match_table = stk3310_acpi_id, }, .probe = stk3310_probe, .remove = stk3310_remove, -- cgit v1.2.3 From 92f82a9f2a8e1e4ad8893bd88d1ffb237237c6ea Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:07 +0000 Subject: iio: light: us5182d: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311190738.gldzuIXo-lkp@intel.com/ Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-18-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/us5182d.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/us5182d.c b/drivers/iio/light/us5182d.c index 61b3b2aea626..9189a1d4d7e1 100644 --- a/drivers/iio/light/us5182d.c +++ b/drivers/iio/light/us5182d.c @@ -9,7 +9,7 @@ #include #include -#include +#include #include #include #include @@ -972,7 +972,7 @@ static struct i2c_driver us5182d_driver = { .name = US5182D_DRV_NAME, .pm = pm_ptr(&us5182d_pm_ops), .of_match_table = us5182d_of_match, - .acpi_match_table = ACPI_PTR(us5182d_acpi_match), + .acpi_match_table = us5182d_acpi_match, }, .probe = us5182d_probe, .remove = us5182d_remove, -- cgit v1.2.3 From e0d77ee640c3288edb6022971280f2a1ecd18a65 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:08 +0000 Subject: iio: magnetometer: bmc150: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Drop unused linux/acpi.h includes. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312040109.Csnmqnb2-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311171116.47sUbZV5-lkp@intel.com/ Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-19-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/bmc150_magn_i2c.c | 3 +-- drivers/iio/magnetometer/bmc150_magn_spi.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c index 281d1fa31c8e..48d9c698f520 100644 --- a/drivers/iio/magnetometer/bmc150_magn_i2c.c +++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include "bmc150_magn.h" @@ -68,7 +67,7 @@ static struct i2c_driver bmc150_magn_driver = { .driver = { .name = "bmc150_magn_i2c", .of_match_table = bmc150_magn_of_match, - .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .acpi_match_table = bmc150_magn_acpi_match, .pm = &bmc150_magn_pm_ops, }, .probe = bmc150_magn_i2c_probe, diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c index 882987721071..abc75a05c46a 100644 --- a/drivers/iio/magnetometer/bmc150_magn_spi.c +++ b/drivers/iio/magnetometer/bmc150_magn_spi.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include "bmc150_magn.h" @@ -55,7 +54,7 @@ static struct spi_driver bmc150_magn_spi_driver = { .remove = bmc150_magn_spi_remove, .id_table = bmc150_magn_spi_id, .driver = { - .acpi_match_table = ACPI_PTR(bmc150_magn_acpi_match), + .acpi_match_table = bmc150_magn_acpi_match, .name = "bmc150_magn_spi", }, }; -- cgit v1.2.3 From b87412052cbddf2d441dad93ea30296999600358 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:09 +0000 Subject: iio: magnetometer: mmc35240: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-20-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/mmc35240.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c index b495b8a63928..6b9f4b056191 100644 --- a/drivers/iio/magnetometer/mmc35240.c +++ b/drivers/iio/magnetometer/mmc35240.c @@ -10,11 +10,11 @@ */ #include +#include #include #include #include #include -#include #include #include @@ -573,7 +573,7 @@ static struct i2c_driver mmc35240_driver = { .name = MMC35240_DRV_NAME, .of_match_table = mmc35240_of_match, .pm = pm_sleep_ptr(&mmc35240_pm_ops), - .acpi_match_table = ACPI_PTR(mmc35240_acpi_match), + .acpi_match_table = mmc35240_acpi_match, }, .probe = mmc35240_probe, .id_table = mmc35240_id, -- cgit v1.2.3 From 3c35281c8e7339ae9f6d452c4f32a2ac9a56a206 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:10 +0000 Subject: iio: potentiometer: max5487: Drop ACPI_PTR() usage Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reported-by: kernel test robot Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-21-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/potentiometer/max5487.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/potentiometer/max5487.c b/drivers/iio/potentiometer/max5487.c index 42723c996c9f..4838d2e72f53 100644 --- a/drivers/iio/potentiometer/max5487.c +++ b/drivers/iio/potentiometer/max5487.c @@ -5,8 +5,8 @@ * Copyright (C) 2016 Cristina-Gabriela Moraru */ #include +#include #include -#include #include #include @@ -144,7 +144,7 @@ MODULE_DEVICE_TABLE(acpi, max5487_acpi_match); static struct spi_driver max5487_driver = { .driver = { .name = "max5487", - .acpi_match_table = ACPI_PTR(max5487_acpi_match), + .acpi_match_table = max5487_acpi_match, }, .id_table = max5487_id, .probe = max5487_spi_probe, -- cgit v1.2.3 From 042ffa6daf6db36d387da66d49116557a93468e2 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:11 +0000 Subject: iio: st_sensors: drop ACPI_PTR() and CONFIG_ACPI guards The complexity of config guards needed for ACPI_PTR() is not worthwhile for the small amount of saved data. This example was doing it correctly but I am proposing dropping this so as to reduce chance of cut and paste where it is done wrong. Also drop now unneeded linux/acpi.h include. Cc: Linus Walleij Cc: Denis CIOCCA Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-22-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_i2c.c | 5 +---- drivers/iio/pressure/st_pressure_i2c.c | 5 +---- 2 files changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 71ee861b2980..fd3749871121 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include @@ -127,14 +126,12 @@ static const struct of_device_id st_accel_of_match[] = { }; MODULE_DEVICE_TABLE(of, st_accel_of_match); -#ifdef CONFIG_ACPI static const struct acpi_device_id st_accel_acpi_match[] = { {"SMO8840", (kernel_ulong_t)LIS2DH12_ACCEL_DEV_NAME}, {"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME}, { }, }; MODULE_DEVICE_TABLE(acpi, st_accel_acpi_match); -#endif static const struct i2c_device_id st_accel_id_table[] = { { LSM303DLH_ACCEL_DEV_NAME }, @@ -204,7 +201,7 @@ static struct i2c_driver st_accel_driver = { .driver = { .name = "st-accel-i2c", .of_match_table = st_accel_of_match, - .acpi_match_table = ACPI_PTR(st_accel_acpi_match), + .acpi_match_table = st_accel_acpi_match, }, .probe = st_accel_i2c_probe, .id_table = st_accel_id_table, diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c index 5101552e3f38..389523d6ae32 100644 --- a/drivers/iio/pressure/st_pressure_i2c.c +++ b/drivers/iio/pressure/st_pressure_i2c.c @@ -7,7 +7,6 @@ * Denis Ciocca */ -#include #include #include #include @@ -55,13 +54,11 @@ static const struct of_device_id st_press_of_match[] = { }; MODULE_DEVICE_TABLE(of, st_press_of_match); -#ifdef CONFIG_ACPI static const struct acpi_device_id st_press_acpi_match[] = { {"SNO9210", LPS22HB}, { }, }; MODULE_DEVICE_TABLE(acpi, st_press_acpi_match); -#endif static const struct i2c_device_id st_press_id_table[] = { { LPS001WP_PRESS_DEV_NAME, LPS001WP }, @@ -114,7 +111,7 @@ static struct i2c_driver st_press_driver = { .driver = { .name = "st-press-i2c", .of_match_table = st_press_of_match, - .acpi_match_table = ACPI_PTR(st_press_acpi_match), + .acpi_match_table = st_press_acpi_match, }, .probe = st_press_i2c_probe, .id_table = st_press_id_table, -- cgit v1.2.3 From 51feb3e35899837362f7a3864c198f9de52280e8 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:12 +0000 Subject: iio: pressure: hp206c: drop ACPI_PTR() and CONFIG_ACPI guards The complexity of config guards needed for ACPI_PTR() is not worthwhile for the small amount of saved data. This example was doing it correctly but I am proposing dropping this so as to reduce chance of cut and paste where it is done wrong. Also drop now unneeded linux/acpi.h include and added linux/mod_devicetable.h for struct acpi_device_id definition. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-23-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hp206c.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c index a072de6cb59c..261af1562827 100644 --- a/drivers/iio/pressure/hp206c.c +++ b/drivers/iio/pressure/hp206c.c @@ -11,12 +11,12 @@ */ #include +#include #include #include #include #include #include -#include #include @@ -400,20 +400,18 @@ static const struct i2c_device_id hp206c_id[] = { }; MODULE_DEVICE_TABLE(i2c, hp206c_id); -#ifdef CONFIG_ACPI static const struct acpi_device_id hp206c_acpi_match[] = { {"HOP206C", 0}, { }, }; MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match); -#endif static struct i2c_driver hp206c_driver = { .probe = hp206c_probe, .id_table = hp206c_id, .driver = { .name = "hp206c", - .acpi_match_table = ACPI_PTR(hp206c_acpi_match), + .acpi_match_table = hp206c_acpi_match, }, }; -- cgit v1.2.3 From 5291fed7e324436a2119d4143fde0c07f1cd7a78 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:13 +0000 Subject: iio: light: max44000: drop ACPI_PTR() and CONFIG_ACPI guards The complexity of config guards needed for ACPI_PTR() is not worthwhile for the small amount of saved data. This example was doing it correctly but I am proposing dropping this so as to reduce chance of cut and paste where it is done wrong. Also drop now unneeded linux/acpi.h include and added linux/mod_devicetable.h for struct acpi_device_id definition. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-24-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/max44000.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c index db96c5b73100..26b464b1b650 100644 --- a/drivers/iio/light/max44000.c +++ b/drivers/iio/light/max44000.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include @@ -19,7 +20,6 @@ #include #include #include -#include #define MAX44000_DRV_NAME "max44000" @@ -603,18 +603,16 @@ static const struct i2c_device_id max44000_id[] = { }; MODULE_DEVICE_TABLE(i2c, max44000_id); -#ifdef CONFIG_ACPI static const struct acpi_device_id max44000_acpi_match[] = { {"MAX44000", 0}, { } }; MODULE_DEVICE_TABLE(acpi, max44000_acpi_match); -#endif static struct i2c_driver max44000_driver = { .driver = { .name = MAX44000_DRV_NAME, - .acpi_match_table = ACPI_PTR(max44000_acpi_match), + .acpi_match_table = max44000_acpi_match, }, .probe = max44000_probe, .id_table = max44000_id, -- cgit v1.2.3 From 3ab574ee39f7acd34fa004e34b52588b53ccebda Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 31 Dec 2023 18:35:14 +0000 Subject: iio: adc: ti-adc109s102: drop ACPI_PTR() and CONFIG_ACPI guards The complexity of config guards needed for ACPI_PTR() is not worthwhile for the small amount of saved data. This example was doing it correctly but I am proposing dropping this so as to reduce chance of cut and paste where it is done wrong. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-25-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-adc108s102.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti-adc108s102.c b/drivers/iio/adc/ti-adc108s102.c index c82a161630e1..69fcbbc7e418 100644 --- a/drivers/iio/adc/ti-adc108s102.c +++ b/drivers/iio/adc/ti-adc108s102.c @@ -293,13 +293,11 @@ static const struct of_device_id adc108s102_of_match[] = { }; MODULE_DEVICE_TABLE(of, adc108s102_of_match); -#ifdef CONFIG_ACPI static const struct acpi_device_id adc108s102_acpi_ids[] = { { "INT3495", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, adc108s102_acpi_ids); -#endif static const struct spi_device_id adc108s102_id[] = { { "adc108s102", 0 }, @@ -311,7 +309,7 @@ static struct spi_driver adc108s102_driver = { .driver = { .name = "adc108s102", .of_match_table = adc108s102_of_match, - .acpi_match_table = ACPI_PTR(adc108s102_acpi_ids), + .acpi_match_table = adc108s102_acpi_ids, }, .probe = adc108s102_probe, .id_table = adc108s102_id, -- cgit v1.2.3 From b2463c49ab68376b20d5165400e47fc675976dd2 Mon Sep 17 00:00:00 2001 From: Jun Yan Date: Tue, 19 Dec 2023 23:04:40 +0800 Subject: iio: accel: bmi088: add i2c support for bmi088 accel driver The BMI088, BMI085 and BMI090L accelerometer also support I2C protocol, so let's add the missing I2C support. The I2C interface of the {BMI085,BMI088,BMI090L} is compatible with the I2C Specification UM10204 Rev. 03 (19 June 2007), available at http://www.nxp.com. The {BMI085,BMI088,BMI090L} supports I2C standard mode and fast mode, only 7-bit address mode is supported. Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi085-ds001.pdf Datasheet: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf Datasheet: https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/4807/BST-BMI090L-DS000-00.pdf Signed-off-by: Jun Yan Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312191325.jfiyeL5F-lkp@intel.com/ Link: https://lore.kernel.org/r/20231219150440.264033-1-jerrysteve1101@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/accel/Kconfig | 8 +++-- drivers/iio/accel/Makefile | 1 + drivers/iio/accel/bmi088-accel-i2c.c | 70 ++++++++++++++++++++++++++++++++++++ 3 files changed, 77 insertions(+), 2 deletions(-) create mode 100644 drivers/iio/accel/bmi088-accel-i2c.c (limited to 'drivers') diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 91adcac875a4..dc92cf599acb 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -254,11 +254,11 @@ config BMC150_ACCEL_SPI config BMI088_ACCEL tristate "Bosch BMI088 Accelerometer Driver" - depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER select REGMAP - select BMI088_ACCEL_SPI + select BMI088_ACCEL_SPI if SPI + select BMI088_ACCEL_I2C if I2C help Say yes here to build support for the following Bosch accelerometers: BMI088, BMI085, BMI090L. Note that all of these are combo module that @@ -267,6 +267,10 @@ config BMI088_ACCEL This driver only implements the accelerometer part, which has its own address and register map. BMG160 provides the gyroscope driver. +config BMI088_ACCEL_I2C + tristate + select REGMAP_I2C + config BMI088_ACCEL_SPI tristate select REGMAP_SPI diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 311ead9c3ef1..db90532ba24a 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o obj-$(CONFIG_BMI088_ACCEL) += bmi088-accel-core.o +obj-$(CONFIG_BMI088_ACCEL_I2C) += bmi088-accel-i2c.o obj-$(CONFIG_BMI088_ACCEL_SPI) += bmi088-accel-spi.o obj-$(CONFIG_DA280) += da280.o obj-$(CONFIG_DA311) += da311.o diff --git a/drivers/iio/accel/bmi088-accel-i2c.c b/drivers/iio/accel/bmi088-accel-i2c.c new file mode 100644 index 000000000000..17e9156bbe89 --- /dev/null +++ b/drivers/iio/accel/bmi088-accel-i2c.c @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * 3-axis accelerometer driver supporting following Bosch-Sensortec chips: + * - BMI088 + * - BMI085 + * - BMI090L + * + * Copyright 2023 Jun Yan + */ + +#include +#include +#include +#include +#include + +#include "bmi088-accel.h" + +static int bmi088_accel_probe(struct i2c_client *i2c) +{ + struct regmap *regmap; + const struct i2c_device_id *id = i2c_client_get_device_id(i2c); + + regmap = devm_regmap_init_i2c(i2c, &bmi088_regmap_conf); + if (IS_ERR(regmap)) { + dev_err(&i2c->dev, "Failed to initialize i2c regmap\n"); + return PTR_ERR(regmap); + } + + return bmi088_accel_core_probe(&i2c->dev, regmap, i2c->irq, + id->driver_data); +} + +static void bmi088_accel_remove(struct i2c_client *i2c) +{ + bmi088_accel_core_remove(&i2c->dev); +} + +static const struct of_device_id bmi088_of_match[] = { + { .compatible = "bosch,bmi085-accel" }, + { .compatible = "bosch,bmi088-accel" }, + { .compatible = "bosch,bmi090l-accel" }, + {} +}; +MODULE_DEVICE_TABLE(of, bmi088_of_match); + +static const struct i2c_device_id bmi088_accel_id[] = { + { "bmi085-accel", BOSCH_BMI085 }, + { "bmi088-accel", BOSCH_BMI088 }, + { "bmi090l-accel", BOSCH_BMI090L }, + {} +}; +MODULE_DEVICE_TABLE(i2c, bmi088_accel_id); + +static struct i2c_driver bmi088_accel_driver = { + .driver = { + .name = "bmi088_accel_i2c", + .pm = pm_ptr(&bmi088_accel_pm_ops), + .of_match_table = bmi088_of_match, + }, + .probe = bmi088_accel_probe, + .remove = bmi088_accel_remove, + .id_table = bmi088_accel_id, +}; +module_i2c_driver(bmi088_accel_driver); + +MODULE_AUTHOR("Jun Yan "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("BMI088 accelerometer driver (I2C)"); +MODULE_IMPORT_NS(IIO_BMI088); -- cgit v1.2.3 From b58b13f156c00c2457035b7071eaaac105fe6836 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 6 Jan 2024 15:32:02 +0000 Subject: iio: invensense: remove redundant initialization of variable period The variable period is being initialized with a value that is never read, it is being re-assigned a new value later on before it is read. The initialization is redundant and can be removed. Cleans up clang scan build warning: Value stored to 'period' during its initialization is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Acked-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240106153202.54861-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/common/inv_sensors/inv_sensors_timestamp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c index 03823ee57f59..3b0f9598a7c7 100644 --- a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c +++ b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c @@ -126,7 +126,7 @@ void inv_sensors_timestamp_interrupt(struct inv_sensors_timestamp *ts, struct inv_sensors_timestamp_interval *it; int64_t delta, interval; const uint32_t fifo_mult = fifo_period / ts->chip.clock_period; - uint32_t period = ts->period; + uint32_t period; bool valid = false; if (fifo_nb == 0) -- cgit v1.2.3 From e7748c17bda04758a01f1241896b553f8b3873cc Mon Sep 17 00:00:00 2001 From: David Lechner Date: Mon, 8 Jan 2024 14:06:44 -0600 Subject: iio: core: use INDIO_ALL_BUFFER_MODES in iio_buffer_enabled() This replaces use of individual buffer mode flags with INDIO_ALL_BUFFER_MODES in the iio_buffer_enabled() function. This simplifies the code and makes it robust in case of the addition of new buffer modes. Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20240108200647.3916681-1-dlechner@baylibre.com Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 9a85752124dd..e8551a1636ba 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -213,9 +213,7 @@ bool iio_buffer_enabled(struct iio_dev *indio_dev) { struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); - return iio_dev_opaque->currentmode & - (INDIO_BUFFER_HARDWARE | INDIO_BUFFER_SOFTWARE | - INDIO_BUFFER_TRIGGERED); + return iio_dev_opaque->currentmode & INDIO_ALL_BUFFER_MODES; } EXPORT_SYMBOL_GPL(iio_buffer_enabled); -- cgit v1.2.3 From 82cc631881206827570d2d84e8a22524afe3638f Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Tue, 9 Jan 2024 15:03:16 +0100 Subject: iio: buffer-dmaengine: make use of the 'struct device *' argument Respect the @dev argument in devm_iio_dmaengine_buffer_setup() and bind the IIO DMA buffer lifetime to that device. For the only user of this function, the IIO parent device is the struct device being passed to the API so no real fix in here (just consistency with other IIO APIs). Signed-off-by: Nuno Sa Reviewed-by: David Lechner Link: https://lore.kernel.org/r/20240109-dmaengine_use_device-v1-1-1cbdb7fe9f29@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/buffer/industrialio-buffer-dmaengine.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c index 5f85ba38e6f6..45fe7d0d42ee 100644 --- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c +++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c @@ -279,8 +279,7 @@ int devm_iio_dmaengine_buffer_setup(struct device *dev, { struct iio_buffer *buffer; - buffer = devm_iio_dmaengine_buffer_alloc(indio_dev->dev.parent, - channel); + buffer = devm_iio_dmaengine_buffer_alloc(dev, channel); if (IS_ERR(buffer)) return PTR_ERR(buffer); -- cgit v1.2.3 From 89a1034cd84148d4040385386850377cdbfeb70c Mon Sep 17 00:00:00 2001 From: ChiYuan Huang Date: Mon, 8 Jan 2024 09:47:28 +0800 Subject: iio: adc: rtq6056: Add support for the whole RTQ6056 family RTQ6053 and RTQ6059 are the same series of RTQ6056. The respective differences with RTQ6056 are listed below RTQ6053 - chip package type RTQ6059 - Reduce the pinout for vbus sensing pin - Some internal ADC scaling change Signed-off-by: ChiYuan Huang Link: https://lore.kernel.org/r/3541207c4727e3a76b9a3caf88ef812a4d47b764.1704676198.git.cy_huang@richtek.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rtq6056.c | 275 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 255 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c index ad4cea6839b2..a5464737e527 100644 --- a/drivers/iio/adc/rtq6056.c +++ b/drivers/iio/adc/rtq6056.c @@ -39,6 +39,10 @@ #define RTQ6056_DEFAULT_CONFIG 0x4127 #define RTQ6056_CONT_ALLON 7 +#define RTQ6059_DEFAULT_CONFIG 0x3C47 +#define RTQ6059_VBUS_LSB_OFFSET 3 +#define RTQ6059_AVG_BASE 8 + enum { RTQ6056_CH_VSHUNT = 0, RTQ6056_CH_VBUS, @@ -47,19 +51,46 @@ enum { RTQ6056_MAX_CHANNEL }; +/* + * The enum is to present the 0x00 CONFIG RG bitfield for the 16bit RG value + * field value order from LSB to MSB + * RTQ6053/6 is OPMODE->VSHUNTCT->VBUSCT->AVG->RESET + * RTQ6059 is OPMODE->SADC->BADC->PGA->RESET + */ enum { F_OPMODE = 0, F_VSHUNTCT, + F_RTQ6059_SADC = F_VSHUNTCT, F_VBUSCT, + F_RTQ6059_BADC = F_VBUSCT, F_AVG, + F_RTQ6059_PGA = F_AVG, F_RESET, F_MAX_FIELDS }; +struct rtq6056_priv; + +struct richtek_dev_data { + bool fixed_samp_freq; + u8 vbus_offset; + int default_conv_time_us; + unsigned int default_config; + unsigned int calib_coefficient; + const int *avg_sample_list; + int avg_sample_list_length; + const struct reg_field *reg_fields; + const struct iio_chan_spec *channels; + int num_channels; + int (*read_scale)(struct iio_chan_spec const *ch, int *val, int *val2); + int (*set_average)(struct rtq6056_priv *priv, int val); +}; + struct rtq6056_priv { struct device *dev; struct regmap *regmap; struct regmap_field *rm_fields[F_MAX_FIELDS]; + const struct richtek_dev_data *devdata; u32 shunt_resistor_uohm; int vshuntct_us; int vbusct_us; @@ -74,6 +105,14 @@ static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = { [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), }; +static const struct reg_field rtq6059_reg_fields[F_MAX_FIELDS] = { + [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2), + [F_RTQ6059_SADC] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 6), + [F_RTQ6059_BADC] = REG_FIELD(RTQ6056_REG_CONFIG, 7, 10), + [F_RTQ6059_PGA] = REG_FIELD(RTQ6056_REG_CONFIG, 11, 12), + [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15), +}; + static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { { .type = IIO_VOLTAGE, @@ -151,10 +190,93 @@ static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = { IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), }; +/* + * Difference between RTQ6056 and RTQ6059 + * - Fixed sampling conversion time + * - Average sample numbers + * - Channel scale + * - calibration coefficient + */ +static const struct iio_chan_spec rtq6059_channels[RTQ6056_MAX_CHANNEL + 1] = { + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 0, + .address = RTQ6056_REG_SHUNTVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 0, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_VOLTAGE, + .indexed = 1, + .channel = 1, + .address = RTQ6056_REG_BUSVOLT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_POWER, + .indexed = 1, + .channel = 2, + .address = RTQ6056_REG_POWER, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 2, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + { + .type = IIO_CURRENT, + .indexed = 1, + .channel = 3, + .address = RTQ6056_REG_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .scan_index = 3, + .scan_type = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_CPU, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL), +}; + static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, struct iio_chan_spec const *ch, int *val) { + const struct richtek_dev_data *devdata = priv->devdata; struct device *dev = priv->dev; unsigned int addr = ch->address; unsigned int regval; @@ -168,12 +290,21 @@ static int rtq6056_adc_read_channel(struct rtq6056_priv *priv, return ret; /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */ - if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER) + switch (addr) { + case RTQ6056_REG_BUSVOLT: + regval >>= devdata->vbus_offset; *val = regval; - else + return IIO_VAL_INT; + case RTQ6056_REG_POWER: + *val = regval; + return IIO_VAL_INT; + case RTQ6056_REG_SHUNTVOLT: + case RTQ6056_REG_CURRENT: *val = sign_extend32(regval, 16); - - return IIO_VAL_INT; + return IIO_VAL_INT; + default: + return -EINVAL; + } } static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, @@ -199,6 +330,28 @@ static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val, } } +static int rtq6059_adc_read_scale(struct iio_chan_spec const *ch, int *val, + int *val2) +{ + switch (ch->address) { + case RTQ6056_REG_SHUNTVOLT: + /* VSHUNT lsb 10uV */ + *val = 10000; + *val2 = 1000000; + return IIO_VAL_FRACTIONAL; + case RTQ6056_REG_BUSVOLT: + /* VBUS lsb 4mV */ + *val = 4; + return IIO_VAL_INT; + case RTQ6056_REG_POWER: + /* Power lsb 20mW */ + *val = 20; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + /* * Sample frequency for channel VSHUNT and VBUS. The indices correspond * with the bit value expected by the chip. And it can be found at @@ -248,6 +401,10 @@ static const int rtq6056_avg_sample_list[] = { 1, 4, 16, 64, 128, 256, 512, 1024, }; +static const int rtq6059_avg_sample_list[] = { + 1, 2, 4, 8, 16, 32, 64, 128, +}; + static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) { unsigned int selector; @@ -268,6 +425,30 @@ static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val) return 0; } +static int rtq6059_adc_set_average(struct rtq6056_priv *priv, int val) +{ + unsigned int selector; + int ret; + + if (val > 128 || val < 1) + return -EINVAL; + + /* The supported average sample is 2^x (x from 0 to 7) */ + selector = fls(val) - 1; + + ret = regmap_field_write(priv->rm_fields[F_RTQ6059_BADC], + RTQ6059_AVG_BASE + selector); + if (ret) + return ret; + + ret = regmap_field_write(priv->rm_fields[F_RTQ6059_SADC], + RTQ6059_AVG_BASE + selector); + + priv->avg_sample = BIT(selector); + + return 0; +} + static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv, struct iio_chan_spec const *ch, int *val) { @@ -292,12 +473,13 @@ static int rtq6056_adc_read_raw(struct iio_dev *indio_dev, int *val2, long mask) { struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; switch (mask) { case IIO_CHAN_INFO_RAW: return rtq6056_adc_read_channel(priv, chan, val); case IIO_CHAN_INFO_SCALE: - return rtq6056_adc_read_scale(chan, val, val2); + return devdata->read_scale(chan, val, val2); case IIO_CHAN_INFO_OVERSAMPLING_RATIO: *val = priv->avg_sample; return IIO_VAL_INT; @@ -313,6 +495,9 @@ static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, const int **vals, int *type, int *length, long mask) { + struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; + switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: *vals = rtq6056_samp_freq_list; @@ -320,9 +505,9 @@ static int rtq6056_adc_read_avail(struct iio_dev *indio_dev, *length = ARRAY_SIZE(rtq6056_samp_freq_list); return IIO_AVAIL_LIST; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - *vals = rtq6056_avg_sample_list; + *vals = devdata->avg_sample_list; + *length = devdata->avg_sample_list_length; *type = IIO_VAL_INT; - *length = ARRAY_SIZE(rtq6056_avg_sample_list); return IIO_AVAIL_LIST; default: return -EINVAL; @@ -334,6 +519,7 @@ static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, int val2, long mask) { struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; int ret; ret = iio_device_claim_direct_mode(indio_dev); @@ -342,10 +528,15 @@ static int rtq6056_adc_write_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: + if (devdata->fixed_samp_freq) { + ret = -EINVAL; + break; + } + ret = rtq6056_adc_set_samp_freq(priv, chan, val); break; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - ret = rtq6056_adc_set_average(priv, val); + ret = devdata->set_average(priv, val); break; default: ret = -EINVAL; @@ -374,6 +565,7 @@ static int rtq6056_adc_read_label(struct iio_dev *indio_dev, static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, int resistor_uohm) { + const struct richtek_dev_data *devdata = priv->devdata; unsigned int calib_val; int ret; @@ -382,8 +574,8 @@ static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv, return -EINVAL; } - /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */ - calib_val = 5120000 / resistor_uohm; + /* calibration = coefficient / (Rshunt (uOhm) * current lsb (1mA)) */ + calib_val = devdata->calib_coefficient / resistor_uohm; ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val); if (ret) return ret; @@ -450,6 +642,7 @@ static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct rtq6056_priv *priv = iio_priv(indio_dev); + const struct richtek_dev_data *devdata = priv->devdata; struct device *dev = priv->dev; struct { u16 vals[RTQ6056_MAX_CHANNEL]; @@ -469,6 +662,9 @@ static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p) if (ret) goto out; + if (addr == RTQ6056_REG_BUSVOLT) + raw >>= devdata->vbus_offset; + data.vals[i++] = raw; } @@ -528,20 +724,26 @@ static int rtq6056_probe(struct i2c_client *i2c) struct rtq6056_priv *priv; struct device *dev = &i2c->dev; struct regmap *regmap; + const struct richtek_dev_data *devdata; unsigned int vendor_id, shunt_resistor_uohm; int ret; if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EOPNOTSUPP; + devdata = device_get_match_data(dev); + if (!devdata) + return dev_err_probe(dev, -EINVAL, "Invalid dev data\n"); + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); if (!indio_dev) return -ENOMEM; priv = iio_priv(indio_dev); priv->dev = dev; - priv->vshuntct_us = priv->vbusct_us = 1037; + priv->vshuntct_us = priv->vbusct_us = devdata->default_conv_time_us; priv->avg_sample = 1; + priv->devdata = devdata; i2c_set_clientdata(i2c, priv); regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config); @@ -561,15 +763,11 @@ static int rtq6056_probe(struct i2c_client *i2c) "Invalid vendor id 0x%04x\n", vendor_id); ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields, - rtq6056_reg_fields, F_MAX_FIELDS); + devdata->reg_fields, F_MAX_FIELDS); if (ret) return dev_err_probe(dev, ret, "Failed to init regmap field\n"); - /* - * By default, configure average sample as 1, bus and shunt conversion - * time as 1037 microsecond, and operating mode to all on. - */ - ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG); + ret = regmap_write(regmap, RTQ6056_REG_CONFIG, devdata->default_config); if (ret) return dev_err_probe(dev, ret, "Failed to enable continuous sensing\n"); @@ -598,8 +796,8 @@ static int rtq6056_probe(struct i2c_client *i2c) indio_dev->name = "rtq6056"; indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->channels = rtq6056_channels; - indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels); + indio_dev->channels = devdata->channels; + indio_dev->num_channels = devdata->num_channels; indio_dev->info = &rtq6056_info; ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, @@ -640,8 +838,45 @@ static int rtq6056_runtime_resume(struct device *dev) static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend, rtq6056_runtime_resume, NULL); +static const struct richtek_dev_data rtq6056_devdata = { + .default_conv_time_us = 1037, + .calib_coefficient = 5120000, + /* + * By default, configure average sample as 1, bus and shunt conversion + * time as 1037 microsecond, and operating mode to all on. + */ + .default_config = RTQ6056_DEFAULT_CONFIG, + .avg_sample_list = rtq6056_avg_sample_list, + .avg_sample_list_length = ARRAY_SIZE(rtq6056_avg_sample_list), + .reg_fields = rtq6056_reg_fields, + .channels = rtq6056_channels, + .num_channels = ARRAY_SIZE(rtq6056_channels), + .read_scale = rtq6056_adc_read_scale, + .set_average = rtq6056_adc_set_average, +}; + +static const struct richtek_dev_data rtq6059_devdata = { + .fixed_samp_freq = true, + .vbus_offset = RTQ6059_VBUS_LSB_OFFSET, + .default_conv_time_us = 532, + .calib_coefficient = 40960000, + /* + * By default, configure average sample as 1, bus and shunt conversion + * time as 532 microsecond, and operating mode to all on. + */ + .default_config = RTQ6059_DEFAULT_CONFIG, + .avg_sample_list = rtq6059_avg_sample_list, + .avg_sample_list_length = ARRAY_SIZE(rtq6059_avg_sample_list), + .reg_fields = rtq6059_reg_fields, + .channels = rtq6059_channels, + .num_channels = ARRAY_SIZE(rtq6059_channels), + .read_scale = rtq6059_adc_read_scale, + .set_average = rtq6059_adc_set_average, +}; + static const struct of_device_id rtq6056_device_match[] = { - { .compatible = "richtek,rtq6056" }, + { .compatible = "richtek,rtq6056", .data = &rtq6056_devdata }, + { .compatible = "richtek,rtq6059", .data = &rtq6059_devdata }, {} }; MODULE_DEVICE_TABLE(of, rtq6056_device_match); -- cgit v1.2.3 From bce3f770684cc1d91ff9edab431b71ac991faf29 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Fri, 12 Jan 2024 11:08:00 -0700 Subject: bus: mhi: host: Add MHI_PM_SYS_ERR_FAIL state When processing a SYSERR, if the device does not respond to the MHI_RESET from the host, the host will be stuck in a difficult to recover state. The host will remain in MHI_PM_SYS_ERR_PROCESS and not clean up the host channels. Clients will not be notified of the SYSERR via the destruction of their channel devices, which means clients may think that the device is still up. Subsequent SYSERR events such as a device fatal error will not be processed as the state machine cannot transition from PROCESS back to DETECT. The only way to recover from this is to unload the mhi module (wipe the state machine state) or for the mhi controller to initiate SHUTDOWN. This issue was discovered by stress testing soc_reset events on AIC100 via the sysfs node. soc_reset is processed entirely in hardware. When the register write hits the endpoint hardware, it causes the soc to reset without firmware involvement. In stress testing, there is a rare race where soc_reset N will cause the soc to reset and PBL to signal SYSERR (fatal error). If soc_reset N+1 is triggered before PBL can process the MHI_RESET from the host, then the soc will reset again, and re-run PBL from the beginning. This will cause PBL to lose all state. PBL will be waiting for the host to respond to the new syserr, but host will be stuck expecting the previous MHI_RESET to be processed. Additionally, the AMSS EE firmware (QSM) was hacked to synthetically reproduce the issue by simulating a FW hang after the QSM issued a SYSERR. In this case, soc_reset would not recover the device. For this failure case, to recover the device, we need a state similar to PROCESS, but can transition to DETECT. There is not a viable existing state to use. POR has the needed transitions, but assumes the device is in a good state and could allow the host to attempt to use the device. Allowing PROCESS to transition to DETECT invites the possibility of parallel SYSERR processing which could get the host and device out of sync. Thus, invent a new state - MHI_PM_SYS_ERR_FAIL This essentially a holding state. It allows us to clean up the host elements that are based on the old state of the device (channels), but does not allow us to directly advance back to an operational state. It does allow the detection and processing of another SYSERR which may recover the device, or allows the controller to do a clean shutdown. Signed-off-by: Jeffrey Hugo Reviewed-by: Carl Vanderlip Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240112180800.536733-1-quic_jhugo@quicinc.com Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/host/init.c | 1 + drivers/bus/mhi/host/internal.h | 9 ++++++--- drivers/bus/mhi/host/pm.c | 20 +++++++++++++++++--- 3 files changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c index 65ceac1837f9..8e5ec1a409b8 100644 --- a/drivers/bus/mhi/host/init.c +++ b/drivers/bus/mhi/host/init.c @@ -62,6 +62,7 @@ static const char * const mhi_pm_state_str[] = { [MHI_PM_STATE_FW_DL_ERR] = "Firmware Download Error", [MHI_PM_STATE_SYS_ERR_DETECT] = "SYS ERROR Detect", [MHI_PM_STATE_SYS_ERR_PROCESS] = "SYS ERROR Process", + [MHI_PM_STATE_SYS_ERR_FAIL] = "SYS ERROR Failure", [MHI_PM_STATE_SHUTDOWN_PROCESS] = "SHUTDOWN Process", [MHI_PM_STATE_LD_ERR_FATAL_DETECT] = "Linkdown or Error Fatal Detect", }; diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h index 30ac415a3000..4b6deea17bcd 100644 --- a/drivers/bus/mhi/host/internal.h +++ b/drivers/bus/mhi/host/internal.h @@ -88,6 +88,7 @@ enum mhi_pm_state { MHI_PM_STATE_FW_DL_ERR, MHI_PM_STATE_SYS_ERR_DETECT, MHI_PM_STATE_SYS_ERR_PROCESS, + MHI_PM_STATE_SYS_ERR_FAIL, MHI_PM_STATE_SHUTDOWN_PROCESS, MHI_PM_STATE_LD_ERR_FATAL_DETECT, MHI_PM_STATE_MAX @@ -104,14 +105,16 @@ enum mhi_pm_state { #define MHI_PM_FW_DL_ERR BIT(7) #define MHI_PM_SYS_ERR_DETECT BIT(8) #define MHI_PM_SYS_ERR_PROCESS BIT(9) -#define MHI_PM_SHUTDOWN_PROCESS BIT(10) +#define MHI_PM_SYS_ERR_FAIL BIT(10) +#define MHI_PM_SHUTDOWN_PROCESS BIT(11) /* link not accessible */ -#define MHI_PM_LD_ERR_FATAL_DETECT BIT(11) +#define MHI_PM_LD_ERR_FATAL_DETECT BIT(12) #define MHI_REG_ACCESS_VALID(pm_state) ((pm_state & (MHI_PM_POR | MHI_PM_M0 | \ MHI_PM_M2 | MHI_PM_M3_ENTER | MHI_PM_M3_EXIT | \ MHI_PM_SYS_ERR_DETECT | MHI_PM_SYS_ERR_PROCESS | \ - MHI_PM_SHUTDOWN_PROCESS | MHI_PM_FW_DL_ERR))) + MHI_PM_SYS_ERR_FAIL | MHI_PM_SHUTDOWN_PROCESS | \ + MHI_PM_FW_DL_ERR))) #define MHI_PM_IN_ERROR_STATE(pm_state) (pm_state >= MHI_PM_FW_DL_ERR) #define MHI_PM_IN_FATAL_STATE(pm_state) (pm_state == MHI_PM_LD_ERR_FATAL_DETECT) #define MHI_DB_ACCESS_VALID(mhi_cntrl) (mhi_cntrl->pm_state & mhi_cntrl->db_access) diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c index a2f2feef1476..d0d033ce9984 100644 --- a/drivers/bus/mhi/host/pm.c +++ b/drivers/bus/mhi/host/pm.c @@ -36,7 +36,10 @@ * M0 <--> M0 * M0 -> FW_DL_ERR * M0 -> M3_ENTER -> M3 -> M3_EXIT --> M0 - * L1: SYS_ERR_DETECT -> SYS_ERR_PROCESS --> POR + * L1: SYS_ERR_DETECT -> SYS_ERR_PROCESS + * SYS_ERR_PROCESS -> SYS_ERR_FAIL + * SYS_ERR_FAIL -> SYS_ERR_DETECT + * SYS_ERR_PROCESS --> POR * L2: SHUTDOWN_PROCESS -> LD_ERR_FATAL_DETECT * SHUTDOWN_PROCESS -> DISABLE * L3: LD_ERR_FATAL_DETECT <--> LD_ERR_FATAL_DETECT @@ -93,7 +96,12 @@ static const struct mhi_pm_transitions dev_state_transitions[] = { }, { MHI_PM_SYS_ERR_PROCESS, - MHI_PM_POR | MHI_PM_SHUTDOWN_PROCESS | + MHI_PM_POR | MHI_PM_SYS_ERR_FAIL | MHI_PM_SHUTDOWN_PROCESS | + MHI_PM_LD_ERR_FATAL_DETECT + }, + { + MHI_PM_SYS_ERR_FAIL, + MHI_PM_SYS_ERR_DETECT | MHI_PM_SHUTDOWN_PROCESS | MHI_PM_LD_ERR_FATAL_DETECT }, /* L2 States */ @@ -629,7 +637,13 @@ static void mhi_pm_sys_error_transition(struct mhi_controller *mhi_cntrl) !in_reset, timeout); if (!ret || in_reset) { dev_err(dev, "Device failed to exit MHI Reset state\n"); - goto exit_sys_error_transition; + write_lock_irq(&mhi_cntrl->pm_lock); + cur_state = mhi_tryset_pm_state(mhi_cntrl, + MHI_PM_SYS_ERR_FAIL); + write_unlock_irq(&mhi_cntrl->pm_lock); + /* Shutdown may have occurred, otherwise cleanup now */ + if (cur_state != MHI_PM_SYS_ERR_FAIL) + goto exit_sys_error_transition; } /* -- cgit v1.2.3 From 8ddf54a32111f6dbe06cd318af443c6545a6c037 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Fri, 5 Jan 2024 10:42:53 -0700 Subject: bus: mhi: host: Read PK HASH dynamically The OEM PK HASH registers in the BHI region are read once during firmware load (boot), cached, and displayed on demand via sysfs. This has a few problems - if firmware load is skipped, the registers will not be read and if the register values change over the life of the device the local cache will be out of sync. Qualcomm Cloud AI 100 can expose both these problems. It is possible for mhi_async_power_up() to be invoked while the device is in AMSS EE, which would bypass firmware loading. Also, Qualcomm Cloud AI 100 has 5 PK HASH slots which can be dynamically provisioned while the device is active, which would result in the values changing and users may want to know what keys are active. Address these concerns by reading the PK HASH registers on-demand during the sysfs read. This will result in showing the most current information. Signed-off-by: Jeffrey Hugo Reviewed-by: Pranjal Ramajor Asha Kanojiya Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240105174253.863388-1-quic_jhugo@quicinc.com Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/host/boot.c | 11 +---------- drivers/bus/mhi/host/init.c | 16 ++++++++++++---- include/linux/mhi.h | 2 -- 3 files changed, 13 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c index edc0ec5a0933..dedd29ca8db3 100644 --- a/drivers/bus/mhi/host/boot.c +++ b/drivers/bus/mhi/host/boot.c @@ -395,7 +395,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) void *buf; dma_addr_t dma_addr; size_t size, fw_sz; - int i, ret; + int ret; if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) { dev_err(dev, "Device MHI is not in valid state\n"); @@ -408,15 +408,6 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl) if (ret) dev_err(dev, "Could not capture serial number via BHI\n"); - for (i = 0; i < ARRAY_SIZE(mhi_cntrl->oem_pk_hash); i++) { - ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_OEMPKHASH(i), - &mhi_cntrl->oem_pk_hash[i]); - if (ret) { - dev_err(dev, "Could not capture OEM PK HASH via BHI\n"); - break; - } - } - /* wait for ready on pass through or any other execution environment */ if (!MHI_FW_LOAD_CAPABLE(mhi_cntrl->ee)) goto fw_load_ready_state; diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c index 8e5ec1a409b8..6d3b045ab259 100644 --- a/drivers/bus/mhi/host/init.c +++ b/drivers/bus/mhi/host/init.c @@ -98,11 +98,19 @@ static ssize_t oem_pk_hash_show(struct device *dev, { struct mhi_device *mhi_dev = to_mhi_device(dev); struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl; - int i, cnt = 0; + u32 hash_segment[MHI_MAX_OEM_PK_HASH_SEGMENTS]; + int i, cnt = 0, ret; - for (i = 0; i < ARRAY_SIZE(mhi_cntrl->oem_pk_hash); i++) - cnt += sysfs_emit_at(buf, cnt, "OEMPKHASH[%d]: 0x%x\n", - i, mhi_cntrl->oem_pk_hash[i]); + for (i = 0; i < MHI_MAX_OEM_PK_HASH_SEGMENTS; i++) { + ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->bhi, BHI_OEMPKHASH(i), &hash_segment[i]); + if (ret) { + dev_err(dev, "Could not capture OEM PK HASH\n"); + return ret; + } + } + + for (i = 0; i < MHI_MAX_OEM_PK_HASH_SEGMENTS; i++) + cnt += sysfs_emit_at(buf, cnt, "OEMPKHASH[%d]: 0x%x\n", i, hash_segment[i]); return cnt; } diff --git a/include/linux/mhi.h b/include/linux/mhi.h index d0f9b522f328..474d32cb0520 100644 --- a/include/linux/mhi.h +++ b/include/linux/mhi.h @@ -325,7 +325,6 @@ struct mhi_controller_config { * @major_version: MHI controller major revision number * @minor_version: MHI controller minor revision number * @serial_number: MHI controller serial number obtained from BHI - * @oem_pk_hash: MHI controller OEM PK Hash obtained from BHI * @mhi_event: MHI event ring configurations table * @mhi_cmd: MHI command ring configurations table * @mhi_ctxt: MHI device context, shared memory between host and device @@ -413,7 +412,6 @@ struct mhi_controller { u32 major_version; u32 minor_version; u32 serial_number; - u32 oem_pk_hash[MHI_MAX_OEM_PK_HASH_SEGMENTS]; struct mhi_event *mhi_event; struct mhi_cmd *mhi_cmd; -- cgit v1.2.3 From 1c9a697bc9b2f77bf6b9efef63d49a72580990e9 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 19 Jan 2024 13:20:17 +0000 Subject: misc: hpilo: fix inconsistent device numbers Each iLO device is allocated `max_ccb` minor device numbers (one for each channel). When `ilo_probe()` calls `device_create()` in a loop, the minor device numbers passed to `device_create()` start at 0. For consistency with the call to `cdev_add()`, and for consistency with the calls to `device_destroy()` from `ilo_remove()`, the minor device numbers passed to `device_create()` should start at the value in the variable `start`. Fix it. This is a logical bug rather than an actual bug, because the number of supported devices is `MAX_ILO_DEV` which is defined as `1`. Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20240119132032.106053-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/misc/hpilo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index f1b74d3f8958..3428a0bd5550 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -842,7 +842,7 @@ static int ilo_probe(struct pci_dev *pdev, for (minor = 0 ; minor < max_ccb; minor++) { struct device *dev; dev = device_create(&ilo_class, &pdev->dev, - MKDEV(ilo_major, minor), NULL, + MKDEV(ilo_major, start + minor), NULL, "hpilo!d%dccb%d", devnum, minor); if (IS_ERR(dev)) dev_err(&pdev->dev, "Could not create files\n"); -- cgit v1.2.3 From 9d5043d93d2e27413b84c7909a6fa8565f1a84dd Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 19 Jan 2024 13:20:18 +0000 Subject: misc: hpilo: rename device creation loop variable In `ilo_probe()`, the loop variable `minor` isn't really the minor device number, it's the channel or slot number. Rename it to `slot` for consistency. Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20240119132032.106053-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman --- drivers/misc/hpilo.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 3428a0bd5550..04bd34c8c506 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -770,7 +770,7 @@ static void ilo_remove(struct pci_dev *pdev) static int ilo_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - int devnum, minor, start, error = 0; + int devnum, slot, start, error = 0; struct ilo_hwinfo *ilo_hw; if (pci_match_id(ilo_blacklist, pdev)) { @@ -839,11 +839,11 @@ static int ilo_probe(struct pci_dev *pdev, goto remove_isr; } - for (minor = 0 ; minor < max_ccb; minor++) { + for (slot = 0; slot < max_ccb; slot++) { struct device *dev; dev = device_create(&ilo_class, &pdev->dev, - MKDEV(ilo_major, start + minor), NULL, - "hpilo!d%dccb%d", devnum, minor); + MKDEV(ilo_major, start + slot), NULL, + "hpilo!d%dccb%d", devnum, slot); if (IS_ERR(dev)) dev_err(&pdev->dev, "Could not create files\n"); } -- cgit v1.2.3 From 0e59f01d7c6820957d28ca252f8da4041d12b6da Mon Sep 17 00:00:00 2001 From: Vitaly Lubart Date: Tue, 23 Jan 2024 12:16:21 +0200 Subject: mei: gsc: add support for auxiliary device created by Xe driver Add support for gsc mei auxiliary device created by Xe driver Reviewed-by: Rodrigo Vivi Signed-off-by: Vitaly Lubart Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240123101625.220365-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/gsc-me.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c index 6be8f1cc052c..9e558ec2ea1d 100644 --- a/drivers/misc/mei/gsc-me.c +++ b/drivers/misc/mei/gsc-me.c @@ -292,6 +292,10 @@ static const struct auxiliary_device_id mei_gsc_id_table[] = { .name = "i915.mei-gscfi", .driver_data = MEI_ME_GSCFI_CFG, }, + { + .name = "xe.mei-gscfi", + .driver_data = MEI_ME_GSCFI_CFG, + }, { /* sentinel */ } @@ -312,5 +316,6 @@ module_auxiliary_driver(mei_gsc_driver); MODULE_AUTHOR("Intel Corporation"); MODULE_ALIAS("auxiliary:i915.mei-gsc"); MODULE_ALIAS("auxiliary:i915.mei-gscfi"); +MODULE_ALIAS("auxiliary:xe.mei-gscfi"); MODULE_DESCRIPTION("Intel(R) Graphics System Controller"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 6244a8b6e3fc39f6d78911b4e8e0f595be1101b4 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Tue, 23 Jan 2024 12:16:22 +0200 Subject: mei: hdcp: match without driver name Xe driver uses this component too, but current match function matches by i915 driver name. Remove dependency on i915 driver name in component_match function. Use PCI header information to match Intel graphics device. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240123101625.220365-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hdcp/mei_hdcp.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c index 51359cc5ece9..f8759a6c9ed3 100644 --- a/drivers/misc/mei/hdcp/mei_hdcp.c +++ b/drivers/misc/mei/hdcp/mei_hdcp.c @@ -17,6 +17,7 @@ */ #include +#include #include #include #include @@ -781,9 +782,18 @@ static int mei_hdcp_component_match(struct device *dev, int subcomponent, void *data) { struct device *base = data; + struct pci_dev *pdev; - if (!dev->driver || strcmp(dev->driver->name, "i915") || - subcomponent != I915_COMPONENT_HDCP) + if (!dev_is_pci(dev)) + return 0; + + pdev = to_pci_dev(dev); + + if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) || + pdev->vendor != PCI_VENDOR_ID_INTEL) + return 0; + + if (subcomponent != I915_COMPONENT_HDCP) return 0; base = base->parent; -- cgit v1.2.3 From ceeedd951f8a70c43a486a21149fa9268746567b Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Tue, 23 Jan 2024 12:16:23 +0200 Subject: mei: pxp: match without driver name Xe driver uses this component too, but current match function matches by i915 driver name. Remove dependency on i915 driver name in component_match function. Use PCI header information to match Intel graphics device. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240123101625.220365-3-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pxp/mei_pxp.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c index 787c6a27a4be..b1e4c23b31a3 100644 --- a/drivers/misc/mei/pxp/mei_pxp.c +++ b/drivers/misc/mei/pxp/mei_pxp.c @@ -13,6 +13,7 @@ #include #include +#include #include #include #include @@ -225,12 +226,21 @@ static int mei_pxp_component_match(struct device *dev, int subcomponent, void *data) { struct device *base = data; + struct pci_dev *pdev; if (!dev) return 0; - if (!dev->driver || strcmp(dev->driver->name, "i915") || - subcomponent != I915_COMPONENT_PXP) + if (!dev_is_pci(dev)) + return 0; + + pdev = to_pci_dev(dev); + + if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) || + pdev->vendor != PCI_VENDOR_ID_INTEL) + return 0; + + if (subcomponent != I915_COMPONENT_PXP) return 0; base = base->parent; -- cgit v1.2.3 From d35e28b565692ad05640f664687af59cc52ed435 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Tue, 23 Jan 2024 12:16:24 +0200 Subject: mei: hdcp: add dependency on Xe driver Optionally depend on either i915 or Xe drivers. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240123101625.220365-4-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hdcp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/mei/hdcp/Kconfig b/drivers/misc/mei/hdcp/Kconfig index 9be312ec798d..631dd9651d7c 100644 --- a/drivers/misc/mei/hdcp/Kconfig +++ b/drivers/misc/mei/hdcp/Kconfig @@ -4,7 +4,7 @@ config INTEL_MEI_HDCP tristate "Intel HDCP2.2 services of ME Interface" depends on INTEL_MEI_ME - depends on DRM_I915 + depends on DRM_I915 || DRM_XE help MEI Support for HDCP2.2 Services on Intel platforms. -- cgit v1.2.3 From 390b60f7638a8755beee22f83a5fbe54fdc9831d Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Tue, 23 Jan 2024 12:16:25 +0200 Subject: mei: pxp: add dependency on Xe driver Optionally depend on either i915 or Xe drivers. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240123101625.220365-5-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pxp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/mei/pxp/Kconfig b/drivers/misc/mei/pxp/Kconfig index e9219b61cd92..aa2dece4a927 100644 --- a/drivers/misc/mei/pxp/Kconfig +++ b/drivers/misc/mei/pxp/Kconfig @@ -4,7 +4,7 @@ config INTEL_MEI_PXP tristate "Intel PXP services of ME Interface" depends on INTEL_MEI_ME - depends on DRM_I915 + depends on DRM_I915 || DRM_XE help MEI Support for PXP Services on Intel platforms. -- cgit v1.2.3 From 1cef9f2d1ef8ccdf7414a39e054852b66376b631 Mon Sep 17 00:00:00 2001 From: Adam Skladowski Date: Wed, 20 Dec 2023 11:38:50 +0100 Subject: interconnect: qcom: Add MSM8909 interconnect provider driver Add driver for interconnect busses found in MSM8909 based platforms. The topology consists of three NoCs that are partially controlled by a RPM processor. In the downstream/vendor kernel from Qualcomm there is an additional "mm-snoc". However, it actually ends up using the same RPM "snoc_clk" as the normal "snoc". It looks like this is actually the same NoC in hardware and the "mm-snoc" was only defined to assign a different "qcom,util-fact" to increase bandwidth requests by a static margin. In mainline we can represent this by assigning the equivalent "ab_coeff" to all the nodes that are part of "mm-snoc" downstream. Signed-off-by: Adam Skladowski [Stephan: Drop separate mm-snoc that exists downstream since it's actually the same NoC as SNoC in hardware, add qos_offset for BIMC, add ab_coeff for mm-snoc nodes and BIMC] Signed-off-by: Stephan Gerhold Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231220-icc-msm8909-v2-2-3b68bbed2891@kernkonzept.com Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/Kconfig | 9 + drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/msm8909.c | 1329 +++++++++++++++++++++++++++++++++++ 3 files changed, 1340 insertions(+) create mode 100644 drivers/interconnect/qcom/msm8909.c (limited to 'drivers') diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index 697f96c49f6f..48b1d5434cd0 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -8,6 +8,15 @@ config INTERCONNECT_QCOM config INTERCONNECT_QCOM_BCM_VOTER tristate +config INTERCONNECT_QCOM_MSM8909 + tristate "Qualcomm MSM8909 interconnect driver" + depends on INTERCONNECT_QCOM + depends on QCOM_SMD_RPM + select INTERCONNECT_QCOM_SMD_RPM + help + This is a driver for the Qualcomm Network-on-Chip on msm8909-based + platforms. + config INTERCONNECT_QCOM_MSM8916 tristate "Qualcomm MSM8916 interconnect driver" depends on INTERCONNECT_QCOM diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile index 704846165022..83a3c1fc8155 100644 --- a/drivers/interconnect/qcom/Makefile +++ b/drivers/interconnect/qcom/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_INTERCONNECT_QCOM) += interconnect_qcom.o interconnect_qcom-y := icc-common.o icc-bcm-voter-objs := bcm-voter.o +qnoc-msm8909-objs := msm8909.o qnoc-msm8916-objs := msm8916.o qnoc-msm8939-objs := msm8939.o qnoc-msm8974-objs := msm8974.o @@ -36,6 +37,7 @@ qnoc-x1e80100-objs := x1e80100.o icc-smd-rpm-objs := smd-rpm.o icc-rpm.o icc-rpm-clocks.o obj-$(CONFIG_INTERCONNECT_QCOM_BCM_VOTER) += icc-bcm-voter.o +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8909) += qnoc-msm8909.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += qnoc-msm8916.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8939) += qnoc-msm8939.o obj-$(CONFIG_INTERCONNECT_QCOM_MSM8974) += qnoc-msm8974.o diff --git a/drivers/interconnect/qcom/msm8909.c b/drivers/interconnect/qcom/msm8909.c new file mode 100644 index 000000000000..23b1a818d774 --- /dev/null +++ b/drivers/interconnect/qcom/msm8909.c @@ -0,0 +1,1329 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Based on data from msm8909-bus.dtsi in Qualcomm's msm-3.18 release: + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "icc-rpm.h" + +enum { + QNOC_MASTER_AMPSS_M0 = 1, + QNOC_MASTER_GRAPHICS_3D, + QNOC_SNOC_BIMC_0_MAS, + QNOC_SNOC_BIMC_1_MAS, + QNOC_MASTER_TCU_0, + QNOC_MASTER_TCU_1, + QNOC_MASTER_AUDIO, + QNOC_MASTER_SPDM, + QNOC_MASTER_DEHR, + QNOC_MASTER_QPIC, + QNOC_MASTER_BLSP_1, + QNOC_MASTER_USB_HS, + QNOC_MASTER_CRYPTO_CORE0, + QNOC_MASTER_SDCC_1, + QNOC_MASTER_SDCC_2, + QNOC_SNOC_PNOC_MAS, + QNOC_MASTER_QDSS_BAM, + QNOC_BIMC_SNOC_MAS, + QNOC_MASTER_MDP_PORT0, + QNOC_PNOC_SNOC_MAS, + QNOC_MASTER_VIDEO_P0, + QNOC_MASTER_VFE, + QNOC_MASTER_QDSS_ETR, + QNOC_PNOC_M_0, + QNOC_PNOC_M_1, + QNOC_PNOC_INT_0, + QNOC_PNOC_INT_1, + QNOC_PNOC_SLV_0, + QNOC_PNOC_SLV_1, + QNOC_PNOC_SLV_2, + QNOC_PNOC_SLV_3, + QNOC_PNOC_SLV_4, + QNOC_PNOC_SLV_5, + QNOC_PNOC_SLV_7, + QNOC_SNOC_MM_INT_0, + QNOC_SNOC_MM_INT_1, + QNOC_SNOC_MM_INT_2, + QNOC_SNOC_MM_INT_BIMC, + QNOC_SNOC_QDSS_INT, + QNOC_SNOC_INT_0, + QNOC_SNOC_INT_1, + QNOC_SNOC_INT_BIMC, + QNOC_SLAVE_EBI_CH0, + QNOC_BIMC_SNOC_SLV, + QNOC_SLAVE_TCSR, + QNOC_SLAVE_SDCC_1, + QNOC_SLAVE_BLSP_1, + QNOC_SLAVE_CRYPTO_0_CFG, + QNOC_SLAVE_MESSAGE_RAM, + QNOC_SLAVE_PDM, + QNOC_SLAVE_PRNG, + QNOC_SLAVE_USB_HS, + QNOC_SLAVE_QPIC, + QNOC_SLAVE_SPDM, + QNOC_SLAVE_SDCC_2, + QNOC_SLAVE_AUDIO, + QNOC_SLAVE_DEHR_CFG, + QNOC_SLAVE_SNOC_CFG, + QNOC_SLAVE_QDSS_CFG, + QNOC_SLAVE_USB_PHYS_CFG, + QNOC_SLAVE_CAMERA_CFG, + QNOC_SLAVE_DISPLAY_CFG, + QNOC_SLAVE_VENUS_CFG, + QNOC_SLAVE_TLMM, + QNOC_SLAVE_GRAPHICS_3D_CFG, + QNOC_SLAVE_IMEM_CFG, + QNOC_SLAVE_BIMC_CFG, + QNOC_SLAVE_PMIC_ARB, + QNOC_SLAVE_TCU, + QNOC_PNOC_SNOC_SLV, + QNOC_SLAVE_APPSS, + QNOC_SNOC_BIMC_0_SLV, + QNOC_SNOC_BIMC_1_SLV, + QNOC_SLAVE_SYSTEM_IMEM, + QNOC_SNOC_PNOC_SLV, + QNOC_SLAVE_QDSS_STM, + QNOC_SLAVE_CATS_128, + QNOC_SLAVE_OCMEM_64, +}; + +static const u16 mas_apps_proc_links[] = { + QNOC_BIMC_SNOC_SLV, + QNOC_SLAVE_EBI_CH0 +}; + +static struct qcom_icc_node mas_apps_proc = { + .name = "mas_apps_proc", + .id = QNOC_MASTER_AMPSS_M0, + .buswidth = 8, + .mas_rpm_id = 0, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 0, + .num_links = ARRAY_SIZE(mas_apps_proc_links), + .links = mas_apps_proc_links, +}; + +static const u16 mas_oxili_links[] = { + QNOC_BIMC_SNOC_SLV, + QNOC_SLAVE_EBI_CH0 +}; + +static struct qcom_icc_node mas_oxili = { + .name = "mas_oxili", + .id = QNOC_MASTER_GRAPHICS_3D, + .buswidth = 8, + .mas_rpm_id = 6, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 2, + .num_links = ARRAY_SIZE(mas_oxili_links), + .links = mas_oxili_links, +}; + +static const u16 mas_snoc_bimc_0_links[] = { + QNOC_SLAVE_EBI_CH0 +}; + +static struct qcom_icc_node mas_snoc_bimc_0 = { + .name = "mas_snoc_bimc_0", + .id = QNOC_SNOC_BIMC_0_MAS, + .buswidth = 8, + .mas_rpm_id = 3, + .slv_rpm_id = -1, + .qos.qos_mode = NOC_QOS_MODE_BYPASS, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 3, + .num_links = ARRAY_SIZE(mas_snoc_bimc_0_links), + .links = mas_snoc_bimc_0_links, +}; + +static const u16 mas_snoc_bimc_1_links[] = { + QNOC_SLAVE_EBI_CH0 +}; + +static struct qcom_icc_node mas_snoc_bimc_1 = { + .name = "mas_snoc_bimc_1", + .id = QNOC_SNOC_BIMC_1_MAS, + .buswidth = 8, + .mas_rpm_id = 76, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_BYPASS, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 4, + .num_links = ARRAY_SIZE(mas_snoc_bimc_1_links), + .links = mas_snoc_bimc_1_links, +}; + +static const u16 mas_tcu_0_links[] = { + QNOC_BIMC_SNOC_SLV, + QNOC_SLAVE_EBI_CH0 +}; + +static struct qcom_icc_node mas_tcu_0 = { + .name = "mas_tcu_0", + .id = QNOC_MASTER_TCU_0, + .buswidth = 8, + .mas_rpm_id = 102, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 2, + .qos.qos_port = 5, + .num_links = ARRAY_SIZE(mas_tcu_0_links), + .links = mas_tcu_0_links, +}; + +static const u16 mas_tcu_1_links[] = { + QNOC_BIMC_SNOC_SLV, + QNOC_SLAVE_EBI_CH0 +}; + +static struct qcom_icc_node mas_tcu_1 = { + .name = "mas_tcu_1", + .id = QNOC_MASTER_TCU_1, + .buswidth = 8, + .mas_rpm_id = 103, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 2, + .qos.qos_port = 6, + .num_links = ARRAY_SIZE(mas_tcu_1_links), + .links = mas_tcu_1_links, +}; + +static const u16 mas_audio_links[] = { + QNOC_PNOC_M_0 +}; + +static struct qcom_icc_node mas_audio = { + .name = "mas_audio", + .id = QNOC_MASTER_AUDIO, + .buswidth = 4, + .mas_rpm_id = 78, + .slv_rpm_id = -1, + .num_links = ARRAY_SIZE(mas_audio_links), + .links = mas_audio_links, +}; + +static const u16 mas_spdm_links[] = { + QNOC_PNOC_M_0 +}; + +static struct qcom_icc_node mas_spdm = { + .name = "mas_spdm", + .id = QNOC_MASTER_SPDM, + .buswidth = 4, + .mas_rpm_id = 50, + .slv_rpm_id = -1, + .num_links = ARRAY_SIZE(mas_spdm_links), + .links = mas_spdm_links, +}; + +static const u16 mas_dehr_links[] = { + QNOC_PNOC_M_0 +}; + +static struct qcom_icc_node mas_dehr = { + .name = "mas_dehr", + .id = QNOC_MASTER_DEHR, + .buswidth = 4, + .mas_rpm_id = 48, + .slv_rpm_id = -1, + .num_links = ARRAY_SIZE(mas_dehr_links), + .links = mas_dehr_links, +}; + +static const u16 mas_qpic_links[] = { + QNOC_PNOC_M_0 +}; + +static struct qcom_icc_node mas_qpic = { + .name = "mas_qpic", + .id = QNOC_MASTER_QPIC, + .buswidth = 4, + .mas_rpm_id = 58, + .slv_rpm_id = -1, + .num_links = ARRAY_SIZE(mas_qpic_links), + .links = mas_qpic_links, +}; + +static const u16 mas_blsp_1_links[] = { + QNOC_PNOC_M_1 +}; + +static struct qcom_icc_node mas_blsp_1 = { + .name = "mas_blsp_1", + .id = QNOC_MASTER_BLSP_1, + .buswidth = 4, + .mas_rpm_id = 41, + .slv_rpm_id = -1, + .num_links = ARRAY_SIZE(mas_blsp_1_links), + .links = mas_blsp_1_links, +}; + +static const u16 mas_usb_hs_links[] = { + QNOC_PNOC_M_1 +}; + +static struct qcom_icc_node mas_usb_hs = { + .name = "mas_usb_hs", + .id = QNOC_MASTER_USB_HS, + .buswidth = 4, + .mas_rpm_id = 42, + .slv_rpm_id = -1, + .num_links = ARRAY_SIZE(mas_usb_hs_links), + .links = mas_usb_hs_links, +}; + +static const u16 mas_crypto_links[] = { + QNOC_PNOC_INT_1 +}; + +static struct qcom_icc_node mas_crypto = { + .name = "mas_crypto", + .id = QNOC_MASTER_CRYPTO_CORE0, + .buswidth = 8, + .mas_rpm_id = 23, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 0, + .num_links = ARRAY_SIZE(mas_crypto_links), + .links = mas_crypto_links, +}; + +static const u16 mas_sdcc_1_links[] = { + QNOC_PNOC_INT_1 +}; + +static struct qcom_icc_node mas_sdcc_1 = { + .name = "mas_sdcc_1", + .id = QNOC_MASTER_SDCC_1, + .buswidth = 8, + .mas_rpm_id = 33, + .slv_rpm_id = -1, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 7, + .num_links = ARRAY_SIZE(mas_sdcc_1_links), + .links = mas_sdcc_1_links, +}; + +static const u16 mas_sdcc_2_links[] = { + QNOC_PNOC_INT_1 +}; + +static struct qcom_icc_node mas_sdcc_2 = { + .name = "mas_sdcc_2", + .id = QNOC_MASTER_SDCC_2, + .buswidth = 8, + .mas_rpm_id = 35, + .slv_rpm_id = -1, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 8, + .num_links = ARRAY_SIZE(mas_sdcc_2_links), + .links = mas_sdcc_2_links, +}; + +static const u16 mas_snoc_pcnoc_links[] = { + QNOC_PNOC_INT_0 +}; + +static struct qcom_icc_node mas_snoc_pcnoc = { + .name = "mas_snoc_pcnoc", + .id = QNOC_SNOC_PNOC_MAS, + .buswidth = 8, + .mas_rpm_id = 77, + .slv_rpm_id = -1, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 9, + .num_links = ARRAY_SIZE(mas_snoc_pcnoc_links), + .links = mas_snoc_pcnoc_links, +}; + +static const u16 mas_qdss_bam_links[] = { + QNOC_SNOC_QDSS_INT +}; + +static struct qcom_icc_node mas_qdss_bam = { + .name = "mas_qdss_bam", + .id = QNOC_MASTER_QDSS_BAM, + .buswidth = 4, + .mas_rpm_id = 19, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 1, + .qos.prio_level = 1, + .qos.qos_port = 11, + .num_links = ARRAY_SIZE(mas_qdss_bam_links), + .links = mas_qdss_bam_links, +}; + +static const u16 mas_bimc_snoc_links[] = { + QNOC_SNOC_INT_0, + QNOC_SNOC_INT_1 +}; + +static struct qcom_icc_node mas_bimc_snoc = { + .name = "mas_bimc_snoc", + .id = QNOC_BIMC_SNOC_MAS, + .buswidth = 8, + .mas_rpm_id = 21, + .slv_rpm_id = -1, + .num_links = ARRAY_SIZE(mas_bimc_snoc_links), + .links = mas_bimc_snoc_links, +}; + +static const u16 mas_mdp_links[] = { + QNOC_SNOC_MM_INT_1, + QNOC_SNOC_MM_INT_2 +}; + +static struct qcom_icc_node mas_mdp = { + .name = "mas_mdp", + .id = QNOC_MASTER_MDP_PORT0, + .buswidth = 16, + .mas_rpm_id = 8, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_BYPASS, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 7, + .num_links = ARRAY_SIZE(mas_mdp_links), + .links = mas_mdp_links, + .ab_coeff = 167, +}; + +static const u16 mas_pcnoc_snoc_links[] = { + QNOC_SNOC_INT_0, + QNOC_SNOC_INT_1, + QNOC_SNOC_INT_BIMC +}; + +static struct qcom_icc_node mas_pcnoc_snoc = { + .name = "mas_pcnoc_snoc", + .id = QNOC_PNOC_SNOC_MAS, + .buswidth = 8, + .mas_rpm_id = 29, + .slv_rpm_id = -1, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 5, + .num_links = ARRAY_SIZE(mas_pcnoc_snoc_links), + .links = mas_pcnoc_snoc_links, +}; + +static const u16 mas_venus_links[] = { + QNOC_SNOC_MM_INT_0, + QNOC_SNOC_MM_INT_2 +}; + +static struct qcom_icc_node mas_venus = { + .name = "mas_venus", + .id = QNOC_MASTER_VIDEO_P0, + .buswidth = 16, + .mas_rpm_id = 9, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_BYPASS, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 8, + .num_links = ARRAY_SIZE(mas_venus_links), + .links = mas_venus_links, + .ab_coeff = 167, +}; + +static const u16 mas_vfe_links[] = { + QNOC_SNOC_MM_INT_1, + QNOC_SNOC_MM_INT_2 +}; + +static struct qcom_icc_node mas_vfe = { + .name = "mas_vfe", + .id = QNOC_MASTER_VFE, + .buswidth = 16, + .mas_rpm_id = 11, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_BYPASS, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 9, + .num_links = ARRAY_SIZE(mas_vfe_links), + .links = mas_vfe_links, + .ab_coeff = 167, +}; + +static const u16 mas_qdss_etr_links[] = { + QNOC_SNOC_QDSS_INT +}; + +static struct qcom_icc_node mas_qdss_etr = { + .name = "mas_qdss_etr", + .id = QNOC_MASTER_QDSS_ETR, + .buswidth = 8, + .mas_rpm_id = 31, + .slv_rpm_id = -1, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 1, + .qos.prio_level = 1, + .qos.qos_port = 10, + .num_links = ARRAY_SIZE(mas_qdss_etr_links), + .links = mas_qdss_etr_links, +}; + +static const u16 pcnoc_m_0_links[] = { + QNOC_PNOC_SNOC_SLV +}; + +static struct qcom_icc_node pcnoc_m_0 = { + .name = "pcnoc_m_0", + .id = QNOC_PNOC_M_0, + .buswidth = 8, + .mas_rpm_id = 87, + .slv_rpm_id = 116, + .qos.qos_mode = NOC_QOS_MODE_BYPASS, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 5, + .num_links = ARRAY_SIZE(pcnoc_m_0_links), + .links = pcnoc_m_0_links, +}; + +static const u16 pcnoc_m_1_links[] = { + QNOC_PNOC_SNOC_SLV +}; + +static struct qcom_icc_node pcnoc_m_1 = { + .name = "pcnoc_m_1", + .id = QNOC_PNOC_M_1, + .buswidth = 8, + .mas_rpm_id = 88, + .slv_rpm_id = 117, + .qos.qos_mode = NOC_QOS_MODE_FIXED, + .qos.areq_prio = 0, + .qos.prio_level = 0, + .qos.qos_port = 6, + .num_links = ARRAY_SIZE(pcnoc_m_1_links), + .links = pcnoc_m_1_links, +}; + +static const u16 pcnoc_int_0_links[] = { + QNOC_PNOC_SLV_3, + QNOC_PNOC_SLV_2, + QNOC_PNOC_SLV_1, + QNOC_PNOC_SLV_0, + QNOC_PNOC_SLV_7, + QNOC_PNOC_SLV_5, + QNOC_PNOC_SLV_4, + QNOC_SLAVE_TCU +}; + +static struct qcom_icc_node pcnoc_int_0 = { + .name = "pcnoc_int_0", + .id = QNOC_PNOC_INT_0, + .buswidth = 8, + .mas_rpm_id = 85, + .slv_rpm_id = 114, + .num_links = ARRAY_SIZE(pcnoc_int_0_links), + .links = pcnoc_int_0_links, +}; + +static const u16 pcnoc_int_1_links[] = { + QNOC_PNOC_SNOC_SLV +}; + +static struct qcom_icc_node pcnoc_int_1 = { + .name = "pcnoc_int_1", + .id = QNOC_PNOC_INT_1, + .buswidth = 8, + .mas_rpm_id = 86, + .slv_rpm_id = 115, + .num_links = ARRAY_SIZE(pcnoc_int_1_links), + .links = pcnoc_int_1_links, +}; + +static const u16 pcnoc_s_0_links[] = { + QNOC_SLAVE_SDCC_1, + QNOC_SLAVE_TCSR, + QNOC_SLAVE_BLSP_1 +}; + +static struct qcom_icc_node pcnoc_s_0 = { + .name = "pcnoc_s_0", + .id = QNOC_PNOC_SLV_0, + .buswidth = 4, + .mas_rpm_id = 89, + .slv_rpm_id = 118, + .num_links = ARRAY_SIZE(pcnoc_s_0_links), + .links = pcnoc_s_0_links, +}; + +static const u16 pcnoc_s_1_links[] = { + QNOC_SLAVE_MESSAGE_RAM, + QNOC_SLAVE_CRYPTO_0_CFG, + QNOC_SLAVE_USB_HS, + QNOC_SLAVE_PDM, + QNOC_SLAVE_PRNG, + QNOC_SLAVE_QPIC +}; + +static struct qcom_icc_node pcnoc_s_1 = { + .name = "pcnoc_s_1", + .id = QNOC_PNOC_SLV_1, + .buswidth = 4, + .mas_rpm_id = 90, + .slv_rpm_id = 119, + .num_links = ARRAY_SIZE(pcnoc_s_1_links), + .links = pcnoc_s_1_links, +}; + +static const u16 pcnoc_s_2_links[] = { + QNOC_SLAVE_SPDM, + QNOC_SLAVE_SDCC_2, + QNOC_SLAVE_AUDIO, + QNOC_SLAVE_DEHR_CFG +}; + +static struct qcom_icc_node pcnoc_s_2 = { + .name = "pcnoc_s_2", + .id = QNOC_PNOC_SLV_2, + .buswidth = 4, + .mas_rpm_id = 91, + .slv_rpm_id = 120, + .num_links = ARRAY_SIZE(pcnoc_s_2_links), + .links = pcnoc_s_2_links, +}; + +static const u16 pcnoc_s_3_links[] = { + QNOC_SLAVE_QDSS_CFG, + QNOC_SLAVE_USB_PHYS_CFG, + QNOC_SLAVE_SNOC_CFG +}; + +static struct qcom_icc_node pcnoc_s_3 = { + .name = "pcnoc_s_3", + .id = QNOC_PNOC_SLV_3, + .buswidth = 4, + .mas_rpm_id = 92, + .slv_rpm_id = 121, + .num_links = ARRAY_SIZE(pcnoc_s_3_links), + .links = pcnoc_s_3_links, +}; + +static const u16 pcnoc_s_4_links[] = { + QNOC_SLAVE_CAMERA_CFG, + QNOC_SLAVE_DISPLAY_CFG, + QNOC_SLAVE_VENUS_CFG +}; + +static struct qcom_icc_node pcnoc_s_4 = { + .name = "pcnoc_s_4", + .id = QNOC_PNOC_SLV_4, + .buswidth = 4, + .mas_rpm_id = 93, + .slv_rpm_id = 122, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(pcnoc_s_4_links), + .links = pcnoc_s_4_links, +}; + +static const u16 pcnoc_s_5_links[] = { + QNOC_SLAVE_TLMM +}; + +static struct qcom_icc_node pcnoc_s_5 = { + .name = "pcnoc_s_5", + .id = QNOC_PNOC_SLV_5, + .buswidth = 4, + .mas_rpm_id = 129, + .slv_rpm_id = 189, + .num_links = ARRAY_SIZE(pcnoc_s_5_links), + .links = pcnoc_s_5_links, +}; + +static const u16 pcnoc_s_7_links[] = { + QNOC_SLAVE_GRAPHICS_3D_CFG, + QNOC_SLAVE_IMEM_CFG, + QNOC_SLAVE_BIMC_CFG, + QNOC_SLAVE_PMIC_ARB +}; + +static struct qcom_icc_node pcnoc_s_7 = { + .name = "pcnoc_s_7", + .id = QNOC_PNOC_SLV_7, + .buswidth = 4, + .mas_rpm_id = 95, + .slv_rpm_id = 124, + .num_links = ARRAY_SIZE(pcnoc_s_7_links), + .links = pcnoc_s_7_links, +}; + +static const u16 mm_int_0_links[] = { + QNOC_SNOC_MM_INT_BIMC +}; + +static struct qcom_icc_node mm_int_0 = { + .name = "mm_int_0", + .id = QNOC_SNOC_MM_INT_0, + .buswidth = 16, + .mas_rpm_id = 79, + .slv_rpm_id = 108, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(mm_int_0_links), + .links = mm_int_0_links, + .ab_coeff = 167, +}; + +static const u16 mm_int_1_links[] = { + QNOC_SNOC_MM_INT_BIMC +}; + +static struct qcom_icc_node mm_int_1 = { + .name = "mm_int_1", + .id = QNOC_SNOC_MM_INT_1, + .buswidth = 16, + .mas_rpm_id = 80, + .slv_rpm_id = 109, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(mm_int_1_links), + .links = mm_int_1_links, + .ab_coeff = 167, +}; + +static const u16 mm_int_2_links[] = { + QNOC_SNOC_INT_0 +}; + +static struct qcom_icc_node mm_int_2 = { + .name = "mm_int_2", + .id = QNOC_SNOC_MM_INT_2, + .buswidth = 16, + .mas_rpm_id = 81, + .slv_rpm_id = 110, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(mm_int_2_links), + .links = mm_int_2_links, + .ab_coeff = 167, +}; + +static const u16 mm_int_bimc_links[] = { + QNOC_SNOC_BIMC_1_SLV +}; + +static struct qcom_icc_node mm_int_bimc = { + .name = "mm_int_bimc", + .id = QNOC_SNOC_MM_INT_BIMC, + .buswidth = 16, + .mas_rpm_id = 82, + .slv_rpm_id = 111, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(mm_int_bimc_links), + .links = mm_int_bimc_links, + .ab_coeff = 167, +}; + +static const u16 qdss_int_links[] = { + QNOC_SNOC_INT_0, + QNOC_SNOC_INT_BIMC +}; + +static struct qcom_icc_node qdss_int = { + .name = "qdss_int", + .id = QNOC_SNOC_QDSS_INT, + .buswidth = 8, + .mas_rpm_id = 98, + .slv_rpm_id = 128, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(qdss_int_links), + .links = qdss_int_links, +}; + +static const u16 snoc_int_0_links[] = { + QNOC_SLAVE_SYSTEM_IMEM, + QNOC_SLAVE_QDSS_STM, + QNOC_SNOC_PNOC_SLV +}; + +static struct qcom_icc_node snoc_int_0 = { + .name = "snoc_int_0", + .id = QNOC_SNOC_INT_0, + .buswidth = 8, + .mas_rpm_id = 99, + .slv_rpm_id = 130, + .num_links = ARRAY_SIZE(snoc_int_0_links), + .links = snoc_int_0_links, +}; + +static const u16 snoc_int_1_links[] = { + QNOC_SLAVE_CATS_128, + QNOC_SLAVE_APPSS, + QNOC_SLAVE_OCMEM_64 +}; + +static struct qcom_icc_node snoc_int_1 = { + .name = "snoc_int_1", + .id = QNOC_SNOC_INT_1, + .buswidth = 8, + .mas_rpm_id = 100, + .slv_rpm_id = 131, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(snoc_int_1_links), + .links = snoc_int_1_links, +}; + +static const u16 snoc_int_bimc_links[] = { + QNOC_SNOC_BIMC_0_SLV +}; + +static struct qcom_icc_node snoc_int_bimc = { + .name = "snoc_int_bimc", + .id = QNOC_SNOC_INT_BIMC, + .buswidth = 8, + .mas_rpm_id = 101, + .slv_rpm_id = 132, + .num_links = ARRAY_SIZE(snoc_int_bimc_links), + .links = snoc_int_bimc_links, +}; + +static struct qcom_icc_node slv_ebi = { + .name = "slv_ebi", + .id = QNOC_SLAVE_EBI_CH0, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 0, +}; + +static const u16 slv_bimc_snoc_links[] = { + QNOC_BIMC_SNOC_MAS +}; + +static struct qcom_icc_node slv_bimc_snoc = { + .name = "slv_bimc_snoc", + .id = QNOC_BIMC_SNOC_SLV, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 2, + .num_links = ARRAY_SIZE(slv_bimc_snoc_links), + .links = slv_bimc_snoc_links, +}; + +static struct qcom_icc_node slv_tcsr = { + .name = "slv_tcsr", + .id = QNOC_SLAVE_TCSR, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 50, +}; + +static struct qcom_icc_node slv_sdcc_1 = { + .name = "slv_sdcc_1", + .id = QNOC_SLAVE_SDCC_1, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 31, +}; + +static struct qcom_icc_node slv_blsp_1 = { + .name = "slv_blsp_1", + .id = QNOC_SLAVE_BLSP_1, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 39, +}; + +static struct qcom_icc_node slv_crypto_0_cfg = { + .name = "slv_crypto_0_cfg", + .id = QNOC_SLAVE_CRYPTO_0_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 52, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node slv_message_ram = { + .name = "slv_message_ram", + .id = QNOC_SLAVE_MESSAGE_RAM, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 55, +}; + +static struct qcom_icc_node slv_pdm = { + .name = "slv_pdm", + .id = QNOC_SLAVE_PDM, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 41, +}; + +static struct qcom_icc_node slv_prng = { + .name = "slv_prng", + .id = QNOC_SLAVE_PRNG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 44, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node slv_usb_hs = { + .name = "slv_usb_hs", + .id = QNOC_SLAVE_USB_HS, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 40, +}; + +static struct qcom_icc_node slv_qpic = { + .name = "slv_qpic", + .id = QNOC_SLAVE_QPIC, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 80, +}; + +static struct qcom_icc_node slv_spdm = { + .name = "slv_spdm", + .id = QNOC_SLAVE_SPDM, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 60, +}; + +static struct qcom_icc_node slv_sdcc_2 = { + .name = "slv_sdcc_2", + .id = QNOC_SLAVE_SDCC_2, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 33, +}; + +static struct qcom_icc_node slv_audio = { + .name = "slv_audio", + .id = QNOC_SLAVE_AUDIO, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 105, +}; + +static struct qcom_icc_node slv_dehr_cfg = { + .name = "slv_dehr_cfg", + .id = QNOC_SLAVE_DEHR_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 61, +}; + +static struct qcom_icc_node slv_snoc_cfg = { + .name = "slv_snoc_cfg", + .id = QNOC_SLAVE_SNOC_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 70, +}; + +static struct qcom_icc_node slv_qdss_cfg = { + .name = "slv_qdss_cfg", + .id = QNOC_SLAVE_QDSS_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 63, +}; + +static struct qcom_icc_node slv_usb_phy = { + .name = "slv_usb_phy", + .id = QNOC_SLAVE_USB_PHYS_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 95, +}; + +static struct qcom_icc_node slv_camera_ss_cfg = { + .name = "slv_camera_ss_cfg", + .id = QNOC_SLAVE_CAMERA_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 3, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node slv_disp_ss_cfg = { + .name = "slv_disp_ss_cfg", + .id = QNOC_SLAVE_DISPLAY_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 4, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node slv_venus_cfg = { + .name = "slv_venus_cfg", + .id = QNOC_SLAVE_VENUS_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 10, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node slv_tlmm = { + .name = "slv_tlmm", + .id = QNOC_SLAVE_TLMM, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 51, +}; + +static struct qcom_icc_node slv_gpu_cfg = { + .name = "slv_gpu_cfg", + .id = QNOC_SLAVE_GRAPHICS_3D_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 11, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node slv_imem_cfg = { + .name = "slv_imem_cfg", + .id = QNOC_SLAVE_IMEM_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 54, +}; + +static struct qcom_icc_node slv_bimc_cfg = { + .name = "slv_bimc_cfg", + .id = QNOC_SLAVE_BIMC_CFG, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 56, +}; + +static struct qcom_icc_node slv_pmic_arb = { + .name = "slv_pmic_arb", + .id = QNOC_SLAVE_PMIC_ARB, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 59, +}; + +static struct qcom_icc_node slv_tcu = { + .name = "slv_tcu", + .id = QNOC_SLAVE_TCU, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 133, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static const u16 slv_pcnoc_snoc_links[] = { + QNOC_PNOC_SNOC_MAS +}; + +static struct qcom_icc_node slv_pcnoc_snoc = { + .name = "slv_pcnoc_snoc", + .id = QNOC_PNOC_SNOC_SLV, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 45, + .num_links = ARRAY_SIZE(slv_pcnoc_snoc_links), + .links = slv_pcnoc_snoc_links, +}; + +static struct qcom_icc_node slv_kpss_ahb = { + .name = "slv_kpss_ahb", + .id = QNOC_SLAVE_APPSS, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 20, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static const u16 slv_snoc_bimc_0_links[] = { + QNOC_SNOC_BIMC_0_MAS +}; + +static struct qcom_icc_node slv_snoc_bimc_0 = { + .name = "slv_snoc_bimc_0", + .id = QNOC_SNOC_BIMC_0_SLV, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 24, + .num_links = ARRAY_SIZE(slv_snoc_bimc_0_links), + .links = slv_snoc_bimc_0_links, +}; + +static const u16 slv_snoc_bimc_1_links[] = { + QNOC_SNOC_BIMC_1_MAS +}; + +static struct qcom_icc_node slv_snoc_bimc_1 = { + .name = "slv_snoc_bimc_1", + .id = QNOC_SNOC_BIMC_1_SLV, + .buswidth = 16, + .mas_rpm_id = -1, + .slv_rpm_id = 104, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, + .num_links = ARRAY_SIZE(slv_snoc_bimc_1_links), + .links = slv_snoc_bimc_1_links, +}; + +static struct qcom_icc_node slv_imem = { + .name = "slv_imem", + .id = QNOC_SLAVE_SYSTEM_IMEM, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 26, +}; + +static const u16 slv_snoc_pcnoc_links[] = { + QNOC_SNOC_PNOC_MAS +}; + +static struct qcom_icc_node slv_snoc_pcnoc = { + .name = "slv_snoc_pcnoc", + .id = QNOC_SNOC_PNOC_SLV, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 28, + .num_links = ARRAY_SIZE(slv_snoc_pcnoc_links), + .links = slv_snoc_pcnoc_links, +}; + +static struct qcom_icc_node slv_qdss_stm = { + .name = "slv_qdss_stm", + .id = QNOC_SLAVE_QDSS_STM, + .buswidth = 4, + .mas_rpm_id = -1, + .slv_rpm_id = 30, +}; + +static struct qcom_icc_node slv_cats_0 = { + .name = "slv_cats_0", + .id = QNOC_SLAVE_CATS_128, + .buswidth = 16, + .mas_rpm_id = -1, + .slv_rpm_id = 106, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node slv_cats_1 = { + .name = "slv_cats_1", + .id = QNOC_SLAVE_OCMEM_64, + .buswidth = 8, + .mas_rpm_id = -1, + .slv_rpm_id = 107, + .qos.ap_owned = true, + .qos.qos_mode = NOC_QOS_MODE_INVALID, +}; + +static struct qcom_icc_node *msm8909_bimc_nodes[] = { + [MAS_APPS_PROC] = &mas_apps_proc, + [MAS_OXILI] = &mas_oxili, + [MAS_SNOC_BIMC_0] = &mas_snoc_bimc_0, + [MAS_SNOC_BIMC_1] = &mas_snoc_bimc_1, + [MAS_TCU_0] = &mas_tcu_0, + [MAS_TCU_1] = &mas_tcu_1, + [SLV_EBI] = &slv_ebi, + [SLV_BIMC_SNOC] = &slv_bimc_snoc, +}; + +static const struct regmap_config msm8909_bimc_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x62000, + .fast_io = true, +}; + +static const struct qcom_icc_desc msm8909_bimc = { + .type = QCOM_ICC_BIMC, + .nodes = msm8909_bimc_nodes, + .num_nodes = ARRAY_SIZE(msm8909_bimc_nodes), + .bus_clk_desc = &bimc_clk, + .regmap_cfg = &msm8909_bimc_regmap_config, + .qos_offset = 0x8000, + .ab_coeff = 154, +}; + +static struct qcom_icc_node *msm8909_pcnoc_nodes[] = { + [MAS_AUDIO] = &mas_audio, + [MAS_SPDM] = &mas_spdm, + [MAS_DEHR] = &mas_dehr, + [MAS_QPIC] = &mas_qpic, + [MAS_BLSP_1] = &mas_blsp_1, + [MAS_USB_HS] = &mas_usb_hs, + [MAS_CRYPTO] = &mas_crypto, + [MAS_SDCC_1] = &mas_sdcc_1, + [MAS_SDCC_2] = &mas_sdcc_2, + [MAS_SNOC_PCNOC] = &mas_snoc_pcnoc, + [PCNOC_M_0] = &pcnoc_m_0, + [PCNOC_M_1] = &pcnoc_m_1, + [PCNOC_INT_0] = &pcnoc_int_0, + [PCNOC_INT_1] = &pcnoc_int_1, + [PCNOC_S_0] = &pcnoc_s_0, + [PCNOC_S_1] = &pcnoc_s_1, + [PCNOC_S_2] = &pcnoc_s_2, + [PCNOC_S_3] = &pcnoc_s_3, + [PCNOC_S_4] = &pcnoc_s_4, + [PCNOC_S_5] = &pcnoc_s_5, + [PCNOC_S_7] = &pcnoc_s_7, + [SLV_TCSR] = &slv_tcsr, + [SLV_SDCC_1] = &slv_sdcc_1, + [SLV_BLSP_1] = &slv_blsp_1, + [SLV_CRYPTO_0_CFG] = &slv_crypto_0_cfg, + [SLV_MESSAGE_RAM] = &slv_message_ram, + [SLV_PDM] = &slv_pdm, + [SLV_PRNG] = &slv_prng, + [SLV_USB_HS] = &slv_usb_hs, + [SLV_QPIC] = &slv_qpic, + [SLV_SPDM] = &slv_spdm, + [SLV_SDCC_2] = &slv_sdcc_2, + [SLV_AUDIO] = &slv_audio, + [SLV_DEHR_CFG] = &slv_dehr_cfg, + [SLV_SNOC_CFG] = &slv_snoc_cfg, + [SLV_QDSS_CFG] = &slv_qdss_cfg, + [SLV_USB_PHY] = &slv_usb_phy, + [SLV_CAMERA_SS_CFG] = &slv_camera_ss_cfg, + [SLV_DISP_SS_CFG] = &slv_disp_ss_cfg, + [SLV_VENUS_CFG] = &slv_venus_cfg, + [SLV_TLMM] = &slv_tlmm, + [SLV_GPU_CFG] = &slv_gpu_cfg, + [SLV_IMEM_CFG] = &slv_imem_cfg, + [SLV_BIMC_CFG] = &slv_bimc_cfg, + [SLV_PMIC_ARB] = &slv_pmic_arb, + [SLV_TCU] = &slv_tcu, + [SLV_PCNOC_SNOC] = &slv_pcnoc_snoc, +}; + +static const struct regmap_config msm8909_pcnoc_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x11000, + .fast_io = true, +}; + +static const struct qcom_icc_desc msm8909_pcnoc = { + .type = QCOM_ICC_NOC, + .nodes = msm8909_pcnoc_nodes, + .num_nodes = ARRAY_SIZE(msm8909_pcnoc_nodes), + .bus_clk_desc = &bus_0_clk, + .regmap_cfg = &msm8909_pcnoc_regmap_config, + .qos_offset = 0x7000, +}; + +static struct qcom_icc_node *msm8909_snoc_nodes[] = { + [MAS_QDSS_BAM] = &mas_qdss_bam, + [MAS_BIMC_SNOC] = &mas_bimc_snoc, + [MAS_MDP] = &mas_mdp, + [MAS_PCNOC_SNOC] = &mas_pcnoc_snoc, + [MAS_VENUS] = &mas_venus, + [MAS_VFE] = &mas_vfe, + [MAS_QDSS_ETR] = &mas_qdss_etr, + [MM_INT_0] = &mm_int_0, + [MM_INT_1] = &mm_int_1, + [MM_INT_2] = &mm_int_2, + [MM_INT_BIMC] = &mm_int_bimc, + [QDSS_INT] = &qdss_int, + [SNOC_INT_0] = &snoc_int_0, + [SNOC_INT_1] = &snoc_int_1, + [SNOC_INT_BIMC] = &snoc_int_bimc, + [SLV_KPSS_AHB] = &slv_kpss_ahb, + [SLV_SNOC_BIMC_0] = &slv_snoc_bimc_0, + [SLV_SNOC_BIMC_1] = &slv_snoc_bimc_1, + [SLV_IMEM] = &slv_imem, + [SLV_SNOC_PCNOC] = &slv_snoc_pcnoc, + [SLV_QDSS_STM] = &slv_qdss_stm, + [SLV_CATS_0] = &slv_cats_0, + [SLV_CATS_1] = &slv_cats_1, +}; + +static const struct regmap_config msm8909_snoc_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x13000, + .fast_io = true, +}; + +static const struct qcom_icc_desc msm8909_snoc = { + .type = QCOM_ICC_NOC, + .nodes = msm8909_snoc_nodes, + .num_nodes = ARRAY_SIZE(msm8909_snoc_nodes), + .bus_clk_desc = &bus_1_clk, + .regmap_cfg = &msm8909_snoc_regmap_config, + .qos_offset = 0x7000, +}; + +static const struct of_device_id msm8909_noc_of_match[] = { + { .compatible = "qcom,msm8909-bimc", .data = &msm8909_bimc }, + { .compatible = "qcom,msm8909-pcnoc", .data = &msm8909_pcnoc }, + { .compatible = "qcom,msm8909-snoc", .data = &msm8909_snoc }, + { } +}; +MODULE_DEVICE_TABLE(of, msm8909_noc_of_match); + +static struct platform_driver msm8909_noc_driver = { + .probe = qnoc_probe, + .remove_new = qnoc_remove, + .driver = { + .name = "qnoc-msm8909", + .of_match_table = msm8909_noc_of_match, + .sync_state = icc_sync_state, + }, +}; +module_platform_driver(msm8909_noc_driver); + +MODULE_DESCRIPTION("Qualcomm MSM8909 NoC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From c32e00d90904d3e01e09d074ae31d3a1051122e9 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 10 Jan 2024 15:16:26 +0200 Subject: interconnect: qcom: sm8550: Remove bogus per-RSC BCMs and nodes The downstream kernel has infrastructure for passing votes from different interconnect nodes onto different RPMh RSCs. This neither implemented, not is going to be implemented upstream (in favor of a different solution using ICC tags through the same node). Unfortunately, as it happens, meaningless (in the upstream context) parts of the vendor driver were copied, ending up causing havoc - since all "per-RSC" (in quotes because they all point to the main APPS one) BCMs defined within the driver overwrite the value in RPMh on every aggregation. To both avoid keeping bogus code around and possibly introducing impossible-to-track-down bugs (busses shutting down for no reason), get rid of the duplicated BCMs and their associated ICC nodes. Signed-off-by: Konrad Dybcio Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-1-ce1272d77540@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sm8550.c | 574 ------------------------------------- drivers/interconnect/qcom/sm8550.h | 284 ++++++++---------- 2 files changed, 122 insertions(+), 736 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sm8550.c b/drivers/interconnect/qcom/sm8550.c index 629faa4c9aae..abc52ad3d1f2 100644 --- a/drivers/interconnect/qcom/sm8550.c +++ b/drivers/interconnect/qcom/sm8550.c @@ -524,231 +524,6 @@ static struct qcom_icc_node xm_gic = { .links = { SM8550_SLAVE_SNOC_GEM_NOC_GC }, }; -static struct qcom_icc_node qnm_mnoc_hf_disp = { - .name = "qnm_mnoc_hf_disp", - .id = SM8550_MASTER_MNOC_HF_MEM_NOC_DISP, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_DISP }, -}; - -static struct qcom_icc_node qnm_pcie_disp = { - .name = "qnm_pcie_disp", - .id = SM8550_MASTER_ANOC_PCIE_GEM_NOC_DISP, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_DISP }, -}; - -static struct qcom_icc_node llcc_mc_disp = { - .name = "llcc_mc_disp", - .id = SM8550_MASTER_LLCC_DISP, - .channels = 4, - .buswidth = 4, - .num_links = 1, - .links = { SM8550_SLAVE_EBI1_DISP }, -}; - -static struct qcom_icc_node qnm_mdp_disp = { - .name = "qnm_mdp_disp", - .id = SM8550_MASTER_MDP_DISP, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_HF_MEM_NOC_DISP }, -}; - -static struct qcom_icc_node qnm_mnoc_hf_cam_ife_0 = { - .name = "qnm_mnoc_hf_cam_ife_0", - .id = SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_0, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qnm_mnoc_sf_cam_ife_0 = { - .name = "qnm_mnoc_sf_cam_ife_0", - .id = SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_0, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qnm_pcie_cam_ife_0 = { - .name = "qnm_pcie_cam_ife_0", - .id = SM8550_MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_0, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node llcc_mc_cam_ife_0 = { - .name = "llcc_mc_cam_ife_0", - .id = SM8550_MASTER_LLCC_CAM_IFE_0, - .channels = 4, - .buswidth = 4, - .num_links = 1, - .links = { SM8550_SLAVE_EBI1_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qnm_camnoc_hf_cam_ife_0 = { - .name = "qnm_camnoc_hf_cam_ife_0", - .id = SM8550_MASTER_CAMNOC_HF_CAM_IFE_0, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qnm_camnoc_icp_cam_ife_0 = { - .name = "qnm_camnoc_icp_cam_ife_0", - .id = SM8550_MASTER_CAMNOC_ICP_CAM_IFE_0, - .channels = 1, - .buswidth = 8, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qnm_camnoc_sf_cam_ife_0 = { - .name = "qnm_camnoc_sf_cam_ife_0", - .id = SM8550_MASTER_CAMNOC_SF_CAM_IFE_0, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qnm_mnoc_hf_cam_ife_1 = { - .name = "qnm_mnoc_hf_cam_ife_1", - .id = SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_1, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qnm_mnoc_sf_cam_ife_1 = { - .name = "qnm_mnoc_sf_cam_ife_1", - .id = SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_1, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qnm_pcie_cam_ife_1 = { - .name = "qnm_pcie_cam_ife_1", - .id = SM8550_MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_1, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node llcc_mc_cam_ife_1 = { - .name = "llcc_mc_cam_ife_1", - .id = SM8550_MASTER_LLCC_CAM_IFE_1, - .channels = 4, - .buswidth = 4, - .num_links = 1, - .links = { SM8550_SLAVE_EBI1_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qnm_camnoc_hf_cam_ife_1 = { - .name = "qnm_camnoc_hf_cam_ife_1", - .id = SM8550_MASTER_CAMNOC_HF_CAM_IFE_1, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qnm_camnoc_icp_cam_ife_1 = { - .name = "qnm_camnoc_icp_cam_ife_1", - .id = SM8550_MASTER_CAMNOC_ICP_CAM_IFE_1, - .channels = 1, - .buswidth = 8, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qnm_camnoc_sf_cam_ife_1 = { - .name = "qnm_camnoc_sf_cam_ife_1", - .id = SM8550_MASTER_CAMNOC_SF_CAM_IFE_1, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qnm_mnoc_hf_cam_ife_2 = { - .name = "qnm_mnoc_hf_cam_ife_2", - .id = SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_2, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_2 }, -}; - -static struct qcom_icc_node qnm_mnoc_sf_cam_ife_2 = { - .name = "qnm_mnoc_sf_cam_ife_2", - .id = SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_2, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_2 }, -}; - -static struct qcom_icc_node qnm_pcie_cam_ife_2 = { - .name = "qnm_pcie_cam_ife_2", - .id = SM8550_MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_2, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_SLAVE_LLCC_CAM_IFE_2 }, -}; - -static struct qcom_icc_node llcc_mc_cam_ife_2 = { - .name = "llcc_mc_cam_ife_2", - .id = SM8550_MASTER_LLCC_CAM_IFE_2, - .channels = 4, - .buswidth = 4, - .num_links = 1, - .links = { SM8550_SLAVE_EBI1_CAM_IFE_2 }, -}; - -static struct qcom_icc_node qnm_camnoc_hf_cam_ife_2 = { - .name = "qnm_camnoc_hf_cam_ife_2", - .id = SM8550_MASTER_CAMNOC_HF_CAM_IFE_2, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_2 }, -}; - -static struct qcom_icc_node qnm_camnoc_icp_cam_ife_2 = { - .name = "qnm_camnoc_icp_cam_ife_2", - .id = SM8550_MASTER_CAMNOC_ICP_CAM_IFE_2, - .channels = 1, - .buswidth = 8, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_2 }, -}; - -static struct qcom_icc_node qnm_camnoc_sf_cam_ife_2 = { - .name = "qnm_camnoc_sf_cam_ife_2", - .id = SM8550_MASTER_CAMNOC_SF_CAM_IFE_2, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_2 }, -}; - static struct qcom_icc_node qns_a1noc_snoc = { .name = "qns_a1noc_snoc", .id = SM8550_SLAVE_A1NOC_SNOC, @@ -1342,137 +1117,6 @@ static struct qcom_icc_node qns_gemnoc_sf = { .links = { SM8550_MASTER_SNOC_SF_MEM_NOC }, }; -static struct qcom_icc_node qns_llcc_disp = { - .name = "qns_llcc_disp", - .id = SM8550_SLAVE_LLCC_DISP, - .channels = 4, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_MASTER_LLCC_DISP }, -}; - -static struct qcom_icc_node ebi_disp = { - .name = "ebi_disp", - .id = SM8550_SLAVE_EBI1_DISP, - .channels = 4, - .buswidth = 4, - .num_links = 0, -}; - -static struct qcom_icc_node qns_mem_noc_hf_disp = { - .name = "qns_mem_noc_hf_disp", - .id = SM8550_SLAVE_MNOC_HF_MEM_NOC_DISP, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_MASTER_MNOC_HF_MEM_NOC_DISP }, -}; - -static struct qcom_icc_node qns_llcc_cam_ife_0 = { - .name = "qns_llcc_cam_ife_0", - .id = SM8550_SLAVE_LLCC_CAM_IFE_0, - .channels = 4, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_MASTER_LLCC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node ebi_cam_ife_0 = { - .name = "ebi_cam_ife_0", - .id = SM8550_SLAVE_EBI1_CAM_IFE_0, - .channels = 4, - .buswidth = 4, - .num_links = 0, -}; - -static struct qcom_icc_node qns_mem_noc_hf_cam_ife_0 = { - .name = "qns_mem_noc_hf_cam_ife_0", - .id = SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_0, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qns_mem_noc_sf_cam_ife_0 = { - .name = "qns_mem_noc_sf_cam_ife_0", - .id = SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_0, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_0 }, -}; - -static struct qcom_icc_node qns_llcc_cam_ife_1 = { - .name = "qns_llcc_cam_ife_1", - .id = SM8550_SLAVE_LLCC_CAM_IFE_1, - .channels = 4, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_MASTER_LLCC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node ebi_cam_ife_1 = { - .name = "ebi_cam_ife_1", - .id = SM8550_SLAVE_EBI1_CAM_IFE_1, - .channels = 4, - .buswidth = 4, - .num_links = 0, -}; - -static struct qcom_icc_node qns_mem_noc_hf_cam_ife_1 = { - .name = "qns_mem_noc_hf_cam_ife_1", - .id = SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_1, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qns_mem_noc_sf_cam_ife_1 = { - .name = "qns_mem_noc_sf_cam_ife_1", - .id = SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_1, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_1 }, -}; - -static struct qcom_icc_node qns_llcc_cam_ife_2 = { - .name = "qns_llcc_cam_ife_2", - .id = SM8550_SLAVE_LLCC_CAM_IFE_2, - .channels = 4, - .buswidth = 16, - .num_links = 1, - .links = { SM8550_MASTER_LLCC_CAM_IFE_2 }, -}; - -static struct qcom_icc_node ebi_cam_ife_2 = { - .name = "ebi_cam_ife_2", - .id = SM8550_SLAVE_EBI1_CAM_IFE_2, - .channels = 4, - .buswidth = 4, - .num_links = 0, -}; - -static struct qcom_icc_node qns_mem_noc_hf_cam_ife_2 = { - .name = "qns_mem_noc_hf_cam_ife_2", - .id = SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_2, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_2 }, -}; - -static struct qcom_icc_node qns_mem_noc_sf_cam_ife_2 = { - .name = "qns_mem_noc_sf_cam_ife_2", - .id = SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_2, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_2 }, -}; - static struct qcom_icc_bcm bcm_acv = { .name = "ACV", .enable_mask = 0x8, @@ -1639,161 +1283,6 @@ static struct qcom_icc_bcm bcm_sn7 = { .nodes = { &qns_pcie_mem_noc }, }; -static struct qcom_icc_bcm bcm_acv_disp = { - .name = "ACV", - .enable_mask = 0x1, - .num_nodes = 1, - .nodes = { &ebi_disp }, -}; - -static struct qcom_icc_bcm bcm_mc0_disp = { - .name = "MC0", - .num_nodes = 1, - .nodes = { &ebi_disp }, -}; - -static struct qcom_icc_bcm bcm_mm0_disp = { - .name = "MM0", - .num_nodes = 1, - .nodes = { &qns_mem_noc_hf_disp }, -}; - -static struct qcom_icc_bcm bcm_sh0_disp = { - .name = "SH0", - .num_nodes = 1, - .nodes = { &qns_llcc_disp }, -}; - -static struct qcom_icc_bcm bcm_sh1_disp = { - .name = "SH1", - .enable_mask = 0x1, - .num_nodes = 2, - .nodes = { &qnm_mnoc_hf_disp, &qnm_pcie_disp }, -}; - -static struct qcom_icc_bcm bcm_acv_cam_ife_0 = { - .name = "ACV", - .enable_mask = 0x0, - .num_nodes = 1, - .nodes = { &ebi_cam_ife_0 }, -}; - -static struct qcom_icc_bcm bcm_mc0_cam_ife_0 = { - .name = "MC0", - .num_nodes = 1, - .nodes = { &ebi_cam_ife_0 }, -}; - -static struct qcom_icc_bcm bcm_mm0_cam_ife_0 = { - .name = "MM0", - .num_nodes = 1, - .nodes = { &qns_mem_noc_hf_cam_ife_0 }, -}; - -static struct qcom_icc_bcm bcm_mm1_cam_ife_0 = { - .name = "MM1", - .enable_mask = 0x1, - .num_nodes = 4, - .nodes = { &qnm_camnoc_hf_cam_ife_0, &qnm_camnoc_icp_cam_ife_0, - &qnm_camnoc_sf_cam_ife_0, &qns_mem_noc_sf_cam_ife_0 }, -}; - -static struct qcom_icc_bcm bcm_sh0_cam_ife_0 = { - .name = "SH0", - .num_nodes = 1, - .nodes = { &qns_llcc_cam_ife_0 }, -}; - -static struct qcom_icc_bcm bcm_sh1_cam_ife_0 = { - .name = "SH1", - .enable_mask = 0x1, - .num_nodes = 3, - .nodes = { &qnm_mnoc_hf_cam_ife_0, &qnm_mnoc_sf_cam_ife_0, - &qnm_pcie_cam_ife_0 }, -}; - -static struct qcom_icc_bcm bcm_acv_cam_ife_1 = { - .name = "ACV", - .enable_mask = 0x0, - .num_nodes = 1, - .nodes = { &ebi_cam_ife_1 }, -}; - -static struct qcom_icc_bcm bcm_mc0_cam_ife_1 = { - .name = "MC0", - .num_nodes = 1, - .nodes = { &ebi_cam_ife_1 }, -}; - -static struct qcom_icc_bcm bcm_mm0_cam_ife_1 = { - .name = "MM0", - .num_nodes = 1, - .nodes = { &qns_mem_noc_hf_cam_ife_1 }, -}; - -static struct qcom_icc_bcm bcm_mm1_cam_ife_1 = { - .name = "MM1", - .enable_mask = 0x1, - .num_nodes = 4, - .nodes = { &qnm_camnoc_hf_cam_ife_1, &qnm_camnoc_icp_cam_ife_1, - &qnm_camnoc_sf_cam_ife_1, &qns_mem_noc_sf_cam_ife_1 }, -}; - -static struct qcom_icc_bcm bcm_sh0_cam_ife_1 = { - .name = "SH0", - .num_nodes = 1, - .nodes = { &qns_llcc_cam_ife_1 }, -}; - -static struct qcom_icc_bcm bcm_sh1_cam_ife_1 = { - .name = "SH1", - .enable_mask = 0x1, - .num_nodes = 3, - .nodes = { &qnm_mnoc_hf_cam_ife_1, &qnm_mnoc_sf_cam_ife_1, - &qnm_pcie_cam_ife_1 }, -}; - -static struct qcom_icc_bcm bcm_acv_cam_ife_2 = { - .name = "ACV", - .enable_mask = 0x0, - .num_nodes = 1, - .nodes = { &ebi_cam_ife_2 }, -}; - -static struct qcom_icc_bcm bcm_mc0_cam_ife_2 = { - .name = "MC0", - .num_nodes = 1, - .nodes = { &ebi_cam_ife_2 }, -}; - -static struct qcom_icc_bcm bcm_mm0_cam_ife_2 = { - .name = "MM0", - .num_nodes = 1, - .nodes = { &qns_mem_noc_hf_cam_ife_2 }, -}; - -static struct qcom_icc_bcm bcm_mm1_cam_ife_2 = { - .name = "MM1", - .enable_mask = 0x1, - .num_nodes = 4, - .nodes = { &qnm_camnoc_hf_cam_ife_2, &qnm_camnoc_icp_cam_ife_2, - &qnm_camnoc_sf_cam_ife_2, &qns_mem_noc_sf_cam_ife_2 }, -}; - -static struct qcom_icc_bcm bcm_sh0_cam_ife_2 = { - .name = "SH0", - .num_nodes = 1, - .nodes = { &qns_llcc_cam_ife_2 }, -}; - -static struct qcom_icc_bcm bcm_sh1_cam_ife_2 = { - .name = "SH1", - .enable_mask = 0x1, - .num_nodes = 3, - .nodes = { &qnm_mnoc_hf_cam_ife_2, &qnm_mnoc_sf_cam_ife_2, - &qnm_pcie_cam_ife_2 }, -}; - static struct qcom_icc_bcm * const aggre1_noc_bcms[] = { }; @@ -1945,14 +1434,6 @@ static const struct qcom_icc_desc sm8550_cnoc_main = { static struct qcom_icc_bcm * const gem_noc_bcms[] = { &bcm_sh0, &bcm_sh1, - &bcm_sh0_disp, - &bcm_sh1_disp, - &bcm_sh0_cam_ife_0, - &bcm_sh1_cam_ife_0, - &bcm_sh0_cam_ife_1, - &bcm_sh1_cam_ife_1, - &bcm_sh0_cam_ife_2, - &bcm_sh1_cam_ife_2, }; static struct qcom_icc_node * const gem_noc_nodes[] = { @@ -1971,21 +1452,6 @@ static struct qcom_icc_node * const gem_noc_nodes[] = { [SLAVE_GEM_NOC_CNOC] = &qns_gem_noc_cnoc, [SLAVE_LLCC] = &qns_llcc, [SLAVE_MEM_NOC_PCIE_SNOC] = &qns_pcie, - [MASTER_MNOC_HF_MEM_NOC_DISP] = &qnm_mnoc_hf_disp, - [MASTER_ANOC_PCIE_GEM_NOC_DISP] = &qnm_pcie_disp, - [SLAVE_LLCC_DISP] = &qns_llcc_disp, - [MASTER_MNOC_HF_MEM_NOC_CAM_IFE_0] = &qnm_mnoc_hf_cam_ife_0, - [MASTER_MNOC_SF_MEM_NOC_CAM_IFE_0] = &qnm_mnoc_sf_cam_ife_0, - [MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_0] = &qnm_pcie_cam_ife_0, - [SLAVE_LLCC_CAM_IFE_0] = &qns_llcc_cam_ife_0, - [MASTER_MNOC_HF_MEM_NOC_CAM_IFE_1] = &qnm_mnoc_hf_cam_ife_1, - [MASTER_MNOC_SF_MEM_NOC_CAM_IFE_1] = &qnm_mnoc_sf_cam_ife_1, - [MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_1] = &qnm_pcie_cam_ife_1, - [SLAVE_LLCC_CAM_IFE_1] = &qns_llcc_cam_ife_1, - [MASTER_MNOC_HF_MEM_NOC_CAM_IFE_2] = &qnm_mnoc_hf_cam_ife_2, - [MASTER_MNOC_SF_MEM_NOC_CAM_IFE_2] = &qnm_mnoc_sf_cam_ife_2, - [MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_2] = &qnm_pcie_cam_ife_2, - [SLAVE_LLCC_CAM_IFE_2] = &qns_llcc_cam_ife_2, }; static const struct qcom_icc_desc sm8550_gem_noc = { @@ -2044,27 +1510,11 @@ static const struct qcom_icc_desc sm8550_lpass_lpicx_noc = { static struct qcom_icc_bcm * const mc_virt_bcms[] = { &bcm_acv, &bcm_mc0, - &bcm_acv_disp, - &bcm_mc0_disp, - &bcm_acv_cam_ife_0, - &bcm_mc0_cam_ife_0, - &bcm_acv_cam_ife_1, - &bcm_mc0_cam_ife_1, - &bcm_acv_cam_ife_2, - &bcm_mc0_cam_ife_2, }; static struct qcom_icc_node * const mc_virt_nodes[] = { [MASTER_LLCC] = &llcc_mc, [SLAVE_EBI1] = &ebi, - [MASTER_LLCC_DISP] = &llcc_mc_disp, - [SLAVE_EBI1_DISP] = &ebi_disp, - [MASTER_LLCC_CAM_IFE_0] = &llcc_mc_cam_ife_0, - [SLAVE_EBI1_CAM_IFE_0] = &ebi_cam_ife_0, - [MASTER_LLCC_CAM_IFE_1] = &llcc_mc_cam_ife_1, - [SLAVE_EBI1_CAM_IFE_1] = &ebi_cam_ife_1, - [MASTER_LLCC_CAM_IFE_2] = &llcc_mc_cam_ife_2, - [SLAVE_EBI1_CAM_IFE_2] = &ebi_cam_ife_2, }; static const struct qcom_icc_desc sm8550_mc_virt = { @@ -2077,13 +1527,6 @@ static const struct qcom_icc_desc sm8550_mc_virt = { static struct qcom_icc_bcm * const mmss_noc_bcms[] = { &bcm_mm0, &bcm_mm1, - &bcm_mm0_disp, - &bcm_mm0_cam_ife_0, - &bcm_mm1_cam_ife_0, - &bcm_mm0_cam_ife_1, - &bcm_mm1_cam_ife_1, - &bcm_mm0_cam_ife_2, - &bcm_mm1_cam_ife_2, }; static struct qcom_icc_node * const mmss_noc_nodes[] = { @@ -2100,23 +1543,6 @@ static struct qcom_icc_node * const mmss_noc_nodes[] = { [SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf, [SLAVE_MNOC_SF_MEM_NOC] = &qns_mem_noc_sf, [SLAVE_SERVICE_MNOC] = &srvc_mnoc, - [MASTER_MDP_DISP] = &qnm_mdp_disp, - [SLAVE_MNOC_HF_MEM_NOC_DISP] = &qns_mem_noc_hf_disp, - [MASTER_CAMNOC_HF_CAM_IFE_0] = &qnm_camnoc_hf_cam_ife_0, - [MASTER_CAMNOC_ICP_CAM_IFE_0] = &qnm_camnoc_icp_cam_ife_0, - [MASTER_CAMNOC_SF_CAM_IFE_0] = &qnm_camnoc_sf_cam_ife_0, - [SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_0] = &qns_mem_noc_hf_cam_ife_0, - [SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_0] = &qns_mem_noc_sf_cam_ife_0, - [MASTER_CAMNOC_HF_CAM_IFE_1] = &qnm_camnoc_hf_cam_ife_1, - [MASTER_CAMNOC_ICP_CAM_IFE_1] = &qnm_camnoc_icp_cam_ife_1, - [MASTER_CAMNOC_SF_CAM_IFE_1] = &qnm_camnoc_sf_cam_ife_1, - [SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_1] = &qns_mem_noc_hf_cam_ife_1, - [SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_1] = &qns_mem_noc_sf_cam_ife_1, - [MASTER_CAMNOC_HF_CAM_IFE_2] = &qnm_camnoc_hf_cam_ife_2, - [MASTER_CAMNOC_ICP_CAM_IFE_2] = &qnm_camnoc_icp_cam_ife_2, - [MASTER_CAMNOC_SF_CAM_IFE_2] = &qnm_camnoc_sf_cam_ife_2, - [SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_2] = &qns_mem_noc_hf_cam_ife_2, - [SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_2] = &qns_mem_noc_sf_cam_ife_2, }; static const struct qcom_icc_desc sm8550_mmss_noc = { diff --git a/drivers/interconnect/qcom/sm8550.h b/drivers/interconnect/qcom/sm8550.h index 8d5862c04bca..c9b2986e1293 100644 --- a/drivers/interconnect/qcom/sm8550.h +++ b/drivers/interconnect/qcom/sm8550.h @@ -12,167 +12,127 @@ #define SM8550_MASTER_A1NOC_SNOC 0 #define SM8550_MASTER_A2NOC_SNOC 1 #define SM8550_MASTER_ANOC_PCIE_GEM_NOC 2 -#define SM8550_MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_0 3 -#define SM8550_MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_1 4 -#define SM8550_MASTER_ANOC_PCIE_GEM_NOC_CAM_IFE_2 5 -#define SM8550_MASTER_ANOC_PCIE_GEM_NOC_DISP 6 -#define SM8550_MASTER_APPSS_PROC 7 -#define SM8550_MASTER_CAMNOC_HF 8 -#define SM8550_MASTER_CAMNOC_HF_CAM_IFE_0 9 -#define SM8550_MASTER_CAMNOC_HF_CAM_IFE_1 10 -#define SM8550_MASTER_CAMNOC_HF_CAM_IFE_2 11 -#define SM8550_MASTER_CAMNOC_ICP 12 -#define SM8550_MASTER_CAMNOC_ICP_CAM_IFE_0 13 -#define SM8550_MASTER_CAMNOC_ICP_CAM_IFE_1 14 -#define SM8550_MASTER_CAMNOC_ICP_CAM_IFE_2 15 -#define SM8550_MASTER_CAMNOC_SF 16 -#define SM8550_MASTER_CAMNOC_SF_CAM_IFE_0 17 -#define SM8550_MASTER_CAMNOC_SF_CAM_IFE_1 18 -#define SM8550_MASTER_CAMNOC_SF_CAM_IFE_2 19 -#define SM8550_MASTER_CDSP_HCP 20 -#define SM8550_MASTER_CDSP_PROC 21 -#define SM8550_MASTER_CNOC_CFG 22 -#define SM8550_MASTER_CNOC_MNOC_CFG 23 -#define SM8550_MASTER_COMPUTE_NOC 24 -#define SM8550_MASTER_CRYPTO 25 -#define SM8550_MASTER_GEM_NOC_CNOC 26 -#define SM8550_MASTER_GEM_NOC_PCIE_SNOC 27 -#define SM8550_MASTER_GFX3D 28 -#define SM8550_MASTER_GIC 29 -#define SM8550_MASTER_GIC_AHB 30 -#define SM8550_MASTER_GPU_TCU 31 -#define SM8550_MASTER_IPA 32 -#define SM8550_MASTER_LLCC 33 -#define SM8550_MASTER_LLCC_CAM_IFE_0 34 -#define SM8550_MASTER_LLCC_CAM_IFE_1 35 -#define SM8550_MASTER_LLCC_CAM_IFE_2 36 -#define SM8550_MASTER_LLCC_DISP 37 -#define SM8550_MASTER_LPASS_GEM_NOC 38 -#define SM8550_MASTER_LPASS_LPINOC 39 -#define SM8550_MASTER_LPASS_PROC 40 -#define SM8550_MASTER_LPIAON_NOC 41 -#define SM8550_MASTER_MDP 42 -#define SM8550_MASTER_MDP_DISP 43 -#define SM8550_MASTER_MNOC_HF_MEM_NOC 44 -#define SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_0 45 -#define SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_1 46 -#define SM8550_MASTER_MNOC_HF_MEM_NOC_CAM_IFE_2 47 -#define SM8550_MASTER_MNOC_HF_MEM_NOC_DISP 48 -#define SM8550_MASTER_MNOC_SF_MEM_NOC 49 -#define SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_0 50 -#define SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_1 51 -#define SM8550_MASTER_MNOC_SF_MEM_NOC_CAM_IFE_2 52 -#define SM8550_MASTER_MSS_PROC 53 -#define SM8550_MASTER_PCIE_0 54 -#define SM8550_MASTER_PCIE_1 55 -#define SM8550_MASTER_PCIE_ANOC_CFG 56 -#define SM8550_MASTER_QDSS_BAM 57 -#define SM8550_MASTER_QDSS_ETR 58 -#define SM8550_MASTER_QDSS_ETR_1 59 -#define SM8550_MASTER_QSPI_0 60 -#define SM8550_MASTER_QUP_1 61 -#define SM8550_MASTER_QUP_2 62 -#define SM8550_MASTER_QUP_CORE_0 63 -#define SM8550_MASTER_QUP_CORE_1 64 -#define SM8550_MASTER_QUP_CORE_2 65 -#define SM8550_MASTER_SDCC_2 66 -#define SM8550_MASTER_SDCC_4 67 -#define SM8550_MASTER_SNOC_GC_MEM_NOC 68 -#define SM8550_MASTER_SNOC_SF_MEM_NOC 69 -#define SM8550_MASTER_SP 70 -#define SM8550_MASTER_SYS_TCU 71 -#define SM8550_MASTER_UFS_MEM 72 -#define SM8550_MASTER_USB3_0 73 -#define SM8550_MASTER_VIDEO 74 -#define SM8550_MASTER_VIDEO_CV_PROC 75 -#define SM8550_MASTER_VIDEO_PROC 76 -#define SM8550_MASTER_VIDEO_V_PROC 77 -#define SM8550_SLAVE_A1NOC_SNOC 78 -#define SM8550_SLAVE_A2NOC_SNOC 79 -#define SM8550_SLAVE_AHB2PHY_NORTH 80 -#define SM8550_SLAVE_AHB2PHY_SOUTH 81 -#define SM8550_SLAVE_ANOC_PCIE_GEM_NOC 82 -#define SM8550_SLAVE_AOSS 83 -#define SM8550_SLAVE_APPSS 84 -#define SM8550_SLAVE_BOOT_IMEM 85 -#define SM8550_SLAVE_CAMERA_CFG 86 -#define SM8550_SLAVE_CDSP_MEM_NOC 87 -#define SM8550_SLAVE_CLK_CTL 88 -#define SM8550_SLAVE_CNOC_CFG 89 -#define SM8550_SLAVE_CNOC_MNOC_CFG 90 -#define SM8550_SLAVE_CNOC_MSS 91 -#define SM8550_SLAVE_CPR_NSPCX 92 -#define SM8550_SLAVE_CRYPTO_0_CFG 93 -#define SM8550_SLAVE_CX_RDPM 94 -#define SM8550_SLAVE_DDRSS_CFG 95 -#define SM8550_SLAVE_DISPLAY_CFG 96 -#define SM8550_SLAVE_EBI1 97 -#define SM8550_SLAVE_EBI1_CAM_IFE_0 98 -#define SM8550_SLAVE_EBI1_CAM_IFE_1 99 -#define SM8550_SLAVE_EBI1_CAM_IFE_2 100 -#define SM8550_SLAVE_EBI1_DISP 101 -#define SM8550_SLAVE_GEM_NOC_CNOC 102 -#define SM8550_SLAVE_GFX3D_CFG 103 -#define SM8550_SLAVE_I2C 104 -#define SM8550_SLAVE_IMEM 105 -#define SM8550_SLAVE_IMEM_CFG 106 -#define SM8550_SLAVE_IPA_CFG 107 -#define SM8550_SLAVE_IPC_ROUTER_CFG 108 -#define SM8550_SLAVE_LLCC 109 -#define SM8550_SLAVE_LLCC_CAM_IFE_0 110 -#define SM8550_SLAVE_LLCC_CAM_IFE_1 111 -#define SM8550_SLAVE_LLCC_CAM_IFE_2 112 -#define SM8550_SLAVE_LLCC_DISP 113 -#define SM8550_SLAVE_LPASS_GEM_NOC 114 -#define SM8550_SLAVE_LPASS_QTB_CFG 115 -#define SM8550_SLAVE_LPIAON_NOC_LPASS_AG_NOC 116 -#define SM8550_SLAVE_LPICX_NOC_LPIAON_NOC 117 -#define SM8550_SLAVE_MEM_NOC_PCIE_SNOC 118 -#define SM8550_SLAVE_MNOC_HF_MEM_NOC 119 -#define SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_0 120 -#define SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_1 121 -#define SM8550_SLAVE_MNOC_HF_MEM_NOC_CAM_IFE_2 122 -#define SM8550_SLAVE_MNOC_HF_MEM_NOC_DISP 123 -#define SM8550_SLAVE_MNOC_SF_MEM_NOC 124 -#define SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_0 125 -#define SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_1 126 -#define SM8550_SLAVE_MNOC_SF_MEM_NOC_CAM_IFE_2 127 -#define SM8550_SLAVE_MX_RDPM 128 -#define SM8550_SLAVE_NSP_QTB_CFG 129 -#define SM8550_SLAVE_PCIE_0 130 -#define SM8550_SLAVE_PCIE_0_CFG 131 -#define SM8550_SLAVE_PCIE_1 132 -#define SM8550_SLAVE_PCIE_1_CFG 133 -#define SM8550_SLAVE_PCIE_ANOC_CFG 134 -#define SM8550_SLAVE_PDM 135 -#define SM8550_SLAVE_PIMEM_CFG 136 -#define SM8550_SLAVE_PRNG 137 -#define SM8550_SLAVE_QDSS_CFG 138 -#define SM8550_SLAVE_QDSS_STM 139 -#define SM8550_SLAVE_QSPI_0 140 -#define SM8550_SLAVE_QUP_1 141 -#define SM8550_SLAVE_QUP_2 142 -#define SM8550_SLAVE_QUP_CORE_0 143 -#define SM8550_SLAVE_QUP_CORE_1 144 -#define SM8550_SLAVE_QUP_CORE_2 145 -#define SM8550_SLAVE_RBCPR_CX_CFG 146 -#define SM8550_SLAVE_RBCPR_MMCX_CFG 147 -#define SM8550_SLAVE_RBCPR_MXA_CFG 148 -#define SM8550_SLAVE_RBCPR_MXC_CFG 149 -#define SM8550_SLAVE_SDCC_2 150 -#define SM8550_SLAVE_SDCC_4 151 -#define SM8550_SLAVE_SERVICE_MNOC 152 -#define SM8550_SLAVE_SERVICE_PCIE_ANOC 153 -#define SM8550_SLAVE_SNOC_GEM_NOC_GC 154 -#define SM8550_SLAVE_SNOC_GEM_NOC_SF 155 -#define SM8550_SLAVE_SPSS_CFG 156 -#define SM8550_SLAVE_TCSR 157 -#define SM8550_SLAVE_TCU 158 -#define SM8550_SLAVE_TLMM 159 -#define SM8550_SLAVE_TME_CFG 160 -#define SM8550_SLAVE_UFS_MEM_CFG 161 -#define SM8550_SLAVE_USB3_0 162 -#define SM8550_SLAVE_VENUS_CFG 163 -#define SM8550_SLAVE_VSENSE_CTRL_CFG 164 +#define SM8550_MASTER_APPSS_PROC 3 +#define SM8550_MASTER_CAMNOC_HF 4 +#define SM8550_MASTER_CAMNOC_ICP 5 +#define SM8550_MASTER_CAMNOC_SF 6 +#define SM8550_MASTER_CDSP_HCP 7 +#define SM8550_MASTER_CDSP_PROC 8 +#define SM8550_MASTER_CNOC_CFG 9 +#define SM8550_MASTER_CNOC_MNOC_CFG 10 +#define SM8550_MASTER_COMPUTE_NOC 11 +#define SM8550_MASTER_CRYPTO 12 +#define SM8550_MASTER_GEM_NOC_CNOC 13 +#define SM8550_MASTER_GEM_NOC_PCIE_SNOC 14 +#define SM8550_MASTER_GFX3D 15 +#define SM8550_MASTER_GIC 16 +#define SM8550_MASTER_GIC_AHB 17 +#define SM8550_MASTER_GPU_TCU 18 +#define SM8550_MASTER_IPA 19 +#define SM8550_MASTER_LLCC 20 +#define SM8550_MASTER_LPASS_GEM_NOC 21 +#define SM8550_MASTER_LPASS_LPINOC 22 +#define SM8550_MASTER_LPASS_PROC 23 +#define SM8550_MASTER_LPIAON_NOC 24 +#define SM8550_MASTER_MDP 25 +#define SM8550_MASTER_MNOC_HF_MEM_NOC 26 +#define SM8550_MASTER_MNOC_SF_MEM_NOC 27 +#define SM8550_MASTER_MSS_PROC 28 +#define SM8550_MASTER_PCIE_0 29 +#define SM8550_MASTER_PCIE_1 30 +#define SM8550_MASTER_PCIE_ANOC_CFG 31 +#define SM8550_MASTER_QDSS_BAM 32 +#define SM8550_MASTER_QDSS_ETR 33 +#define SM8550_MASTER_QDSS_ETR_1 34 +#define SM8550_MASTER_QSPI_0 35 +#define SM8550_MASTER_QUP_1 36 +#define SM8550_MASTER_QUP_2 37 +#define SM8550_MASTER_QUP_CORE_0 38 +#define SM8550_MASTER_QUP_CORE_1 39 +#define SM8550_MASTER_QUP_CORE_2 40 +#define SM8550_MASTER_SDCC_2 41 +#define SM8550_MASTER_SDCC_4 42 +#define SM8550_MASTER_SNOC_GC_MEM_NOC 43 +#define SM8550_MASTER_SNOC_SF_MEM_NOC 44 +#define SM8550_MASTER_SP 45 +#define SM8550_MASTER_SYS_TCU 46 +#define SM8550_MASTER_UFS_MEM 47 +#define SM8550_MASTER_USB3_0 48 +#define SM8550_MASTER_VIDEO 49 +#define SM8550_MASTER_VIDEO_CV_PROC 50 +#define SM8550_MASTER_VIDEO_PROC 51 +#define SM8550_MASTER_VIDEO_V_PROC 52 +#define SM8550_SLAVE_A1NOC_SNOC 53 +#define SM8550_SLAVE_A2NOC_SNOC 54 +#define SM8550_SLAVE_AHB2PHY_NORTH 55 +#define SM8550_SLAVE_AHB2PHY_SOUTH 56 +#define SM8550_SLAVE_ANOC_PCIE_GEM_NOC 57 +#define SM8550_SLAVE_AOSS 58 +#define SM8550_SLAVE_APPSS 59 +#define SM8550_SLAVE_BOOT_IMEM 60 +#define SM8550_SLAVE_CAMERA_CFG 61 +#define SM8550_SLAVE_CDSP_MEM_NOC 62 +#define SM8550_SLAVE_CLK_CTL 63 +#define SM8550_SLAVE_CNOC_CFG 64 +#define SM8550_SLAVE_CNOC_MNOC_CFG 65 +#define SM8550_SLAVE_CNOC_MSS 66 +#define SM8550_SLAVE_CPR_NSPCX 67 +#define SM8550_SLAVE_CRYPTO_0_CFG 68 +#define SM8550_SLAVE_CX_RDPM 69 +#define SM8550_SLAVE_DDRSS_CFG 70 +#define SM8550_SLAVE_DISPLAY_CFG 71 +#define SM8550_SLAVE_EBI1 72 +#define SM8550_SLAVE_GEM_NOC_CNOC 73 +#define SM8550_SLAVE_GFX3D_CFG 74 +#define SM8550_SLAVE_I2C 75 +#define SM8550_SLAVE_IMEM 76 +#define SM8550_SLAVE_IMEM_CFG 77 +#define SM8550_SLAVE_IPA_CFG 78 +#define SM8550_SLAVE_IPC_ROUTER_CFG 79 +#define SM8550_SLAVE_LLCC 80 +#define SM8550_SLAVE_LPASS_GEM_NOC 81 +#define SM8550_SLAVE_LPASS_QTB_CFG 82 +#define SM8550_SLAVE_LPIAON_NOC_LPASS_AG_NOC 83 +#define SM8550_SLAVE_LPICX_NOC_LPIAON_NOC 84 +#define SM8550_SLAVE_MEM_NOC_PCIE_SNOC 85 +#define SM8550_SLAVE_MNOC_HF_MEM_NOC 86 +#define SM8550_SLAVE_MNOC_SF_MEM_NOC 87 +#define SM8550_SLAVE_MX_RDPM 88 +#define SM8550_SLAVE_NSP_QTB_CFG 89 +#define SM8550_SLAVE_PCIE_0 90 +#define SM8550_SLAVE_PCIE_0_CFG 91 +#define SM8550_SLAVE_PCIE_1 92 +#define SM8550_SLAVE_PCIE_1_CFG 93 +#define SM8550_SLAVE_PCIE_ANOC_CFG 94 +#define SM8550_SLAVE_PDM 95 +#define SM8550_SLAVE_PIMEM_CFG 96 +#define SM8550_SLAVE_PRNG 97 +#define SM8550_SLAVE_QDSS_CFG 98 +#define SM8550_SLAVE_QDSS_STM 99 +#define SM8550_SLAVE_QSPI_0 100 +#define SM8550_SLAVE_QUP_1 101 +#define SM8550_SLAVE_QUP_2 102 +#define SM8550_SLAVE_QUP_CORE_0 103 +#define SM8550_SLAVE_QUP_CORE_1 104 +#define SM8550_SLAVE_QUP_CORE_2 105 +#define SM8550_SLAVE_RBCPR_CX_CFG 106 +#define SM8550_SLAVE_RBCPR_MMCX_CFG 107 +#define SM8550_SLAVE_RBCPR_MXA_CFG 108 +#define SM8550_SLAVE_RBCPR_MXC_CFG 109 +#define SM8550_SLAVE_SDCC_2 110 +#define SM8550_SLAVE_SDCC_4 111 +#define SM8550_SLAVE_SERVICE_MNOC 112 +#define SM8550_SLAVE_SERVICE_PCIE_ANOC 113 +#define SM8550_SLAVE_SNOC_GEM_NOC_GC 114 +#define SM8550_SLAVE_SNOC_GEM_NOC_SF 115 +#define SM8550_SLAVE_SPSS_CFG 116 +#define SM8550_SLAVE_TCSR 117 +#define SM8550_SLAVE_TCU 118 +#define SM8550_SLAVE_TLMM 119 +#define SM8550_SLAVE_TME_CFG 120 +#define SM8550_SLAVE_UFS_MEM_CFG 121 +#define SM8550_SLAVE_USB3_0 122 +#define SM8550_SLAVE_VENUS_CFG 123 +#define SM8550_SLAVE_VSENSE_CTRL_CFG 124 #endif -- cgit v1.2.3 From a3973318e7eb82bee0a69381206ac724eeda2ad8 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 10 Jan 2024 15:16:26 +0200 Subject: interconnect: qcom: x1e80100: Remove bogus per-RSC BCMs and nodes The downstream kernel has infrastructure for passing votes from different interconnect nodes onto different RPMh RSCs. This neither implemented, not is going to be implemented upstream (in favor of a different solution using ICC tags through the same node). Unfortunately, as it happens, meaningless (in the upstream context) parts of the vendor driver were copied, ending up causing havoc - since all "per-RSC" (in quotes because they all point to the main APPS one) BCMs defined within the driver overwrite the value in RPMh on every aggregation. To both avoid keeping bogus code around and possibly introducing impossible-to-track-down bugs (busses shutting down for no reason), get rid of the duplicated BCMs and their associated ICC nodes. Signed-off-by: Konrad Dybcio Reviewed-by: Rajendra Nayak Link: https://lore.kernel.org/r/20240102-topic-x1e_fixes-v1-1-70723e08d5f6@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/x1e80100.c | 315 ----------------------------------- 1 file changed, 315 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/x1e80100.c b/drivers/interconnect/qcom/x1e80100.c index d19501d913b3..5b2de9c3a1d6 100644 --- a/drivers/interconnect/qcom/x1e80100.c +++ b/drivers/interconnect/qcom/x1e80100.c @@ -670,150 +670,6 @@ static struct qcom_icc_node xm_usb4_2 = { .links = { X1E80100_SLAVE_AGGRE_USB_SOUTH }, }; -static struct qcom_icc_node qnm_mnoc_hf_disp = { - .name = "qnm_mnoc_hf_disp", - .id = X1E80100_MASTER_MNOC_HF_MEM_NOC_DISP, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { X1E80100_SLAVE_LLCC_DISP }, -}; - -static struct qcom_icc_node qnm_pcie_disp = { - .name = "qnm_pcie_disp", - .id = X1E80100_MASTER_ANOC_PCIE_GEM_NOC_DISP, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_SLAVE_LLCC_DISP }, -}; - -static struct qcom_icc_node llcc_mc_disp = { - .name = "llcc_mc_disp", - .id = X1E80100_MASTER_LLCC_DISP, - .channels = 8, - .buswidth = 4, - .num_links = 1, - .links = { X1E80100_SLAVE_EBI1_DISP }, -}; - -static struct qcom_icc_node qnm_mdp_disp = { - .name = "qnm_mdp_disp", - .id = X1E80100_MASTER_MDP_DISP, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { X1E80100_SLAVE_MNOC_HF_MEM_NOC_DISP }, -}; - -static struct qcom_icc_node qnm_pcie_pcie = { - .name = "qnm_pcie_pcie", - .id = X1E80100_MASTER_ANOC_PCIE_GEM_NOC_PCIE, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_SLAVE_LLCC_PCIE }, -}; - -static struct qcom_icc_node llcc_mc_pcie = { - .name = "llcc_mc_pcie", - .id = X1E80100_MASTER_LLCC_PCIE, - .channels = 8, - .buswidth = 4, - .num_links = 1, - .links = { X1E80100_SLAVE_EBI1_PCIE }, -}; - -static struct qcom_icc_node qnm_pcie_north_gem_noc_pcie = { - .name = "qnm_pcie_north_gem_noc_pcie", - .id = X1E80100_MASTER_PCIE_NORTH_PCIE, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_SLAVE_ANOC_PCIE_GEM_NOC_PCIE }, -}; - -static struct qcom_icc_node qnm_pcie_south_gem_noc_pcie = { - .name = "qnm_pcie_south_gem_noc_pcie", - .id = X1E80100_MASTER_PCIE_SOUTH_PCIE, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_SLAVE_ANOC_PCIE_GEM_NOC_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_3_pcie = { - .name = "xm_pcie_3_pcie", - .id = X1E80100_MASTER_PCIE_3_PCIE, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_NORTH_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_4_pcie = { - .name = "xm_pcie_4_pcie", - .id = X1E80100_MASTER_PCIE_4_PCIE, - .channels = 1, - .buswidth = 8, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_NORTH_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_5_pcie = { - .name = "xm_pcie_5_pcie", - .id = X1E80100_MASTER_PCIE_5_PCIE, - .channels = 1, - .buswidth = 8, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_NORTH_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_0_pcie = { - .name = "xm_pcie_0_pcie", - .id = X1E80100_MASTER_PCIE_0_PCIE, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_SOUTH_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_1_pcie = { - .name = "xm_pcie_1_pcie", - .id = X1E80100_MASTER_PCIE_1_PCIE, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_SOUTH_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_2_pcie = { - .name = "xm_pcie_2_pcie", - .id = X1E80100_MASTER_PCIE_2_PCIE, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_SOUTH_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_6a_pcie = { - .name = "xm_pcie_6a_pcie", - .id = X1E80100_MASTER_PCIE_6A_PCIE, - .channels = 1, - .buswidth = 32, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_SOUTH_PCIE }, -}; - -static struct qcom_icc_node xm_pcie_6b_pcie = { - .name = "xm_pcie_6b_pcie", - .id = X1E80100_MASTER_PCIE_6B_PCIE, - .channels = 1, - .buswidth = 16, - .num_links = 1, - .links = { X1E80100_SLAVE_PCIE_SOUTH_PCIE }, -}; - static struct qcom_icc_node qns_a1noc_snoc = { .name = "qns_a1noc_snoc", .id = X1E80100_SLAVE_A1NOC_SNOC, @@ -1514,76 +1370,6 @@ static struct qcom_icc_node qns_aggre_usb_south_snoc = { .links = { X1E80100_MASTER_AGGRE_USB_SOUTH }, }; -static struct qcom_icc_node qns_llcc_disp = { - .name = "qns_llcc_disp", - .id = X1E80100_SLAVE_LLCC_DISP, - .channels = 8, - .buswidth = 16, - .num_links = 1, - .links = { X1E80100_MASTER_LLCC_DISP }, -}; - -static struct qcom_icc_node ebi_disp = { - .name = "ebi_disp", - .id = X1E80100_SLAVE_EBI1_DISP, - .channels = 8, - .buswidth = 4, - .num_links = 0, -}; - -static struct qcom_icc_node qns_mem_noc_hf_disp = { - .name = "qns_mem_noc_hf_disp", - .id = X1E80100_SLAVE_MNOC_HF_MEM_NOC_DISP, - .channels = 2, - .buswidth = 32, - .num_links = 1, - .links = { X1E80100_MASTER_MNOC_HF_MEM_NOC_DISP }, -}; - -static struct qcom_icc_node qns_llcc_pcie = { - .name = "qns_llcc_pcie", - .id = X1E80100_SLAVE_LLCC_PCIE, - .channels = 8, - .buswidth = 16, - .num_links = 1, - .links = { X1E80100_MASTER_LLCC_PCIE }, -}; - -static struct qcom_icc_node ebi_pcie = { - .name = "ebi_pcie", - .id = X1E80100_SLAVE_EBI1_PCIE, - .channels = 8, - .buswidth = 4, - .num_links = 0, -}; - -static struct qcom_icc_node qns_pcie_mem_noc_pcie = { - .name = "qns_pcie_mem_noc_pcie", - .id = X1E80100_SLAVE_ANOC_PCIE_GEM_NOC_PCIE, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_MASTER_ANOC_PCIE_GEM_NOC_PCIE }, -}; - -static struct qcom_icc_node qns_pcie_north_gem_noc_pcie = { - .name = "qns_pcie_north_gem_noc_pcie", - .id = X1E80100_SLAVE_PCIE_NORTH_PCIE, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_MASTER_PCIE_NORTH_PCIE }, -}; - -static struct qcom_icc_node qns_pcie_south_gem_noc_pcie = { - .name = "qns_pcie_south_gem_noc_pcie", - .id = X1E80100_SLAVE_PCIE_SOUTH_PCIE, - .channels = 1, - .buswidth = 64, - .num_links = 1, - .links = { X1E80100_MASTER_PCIE_SOUTH_PCIE }, -}; - static struct qcom_icc_bcm bcm_acv = { .name = "ACV", .num_nodes = 1, @@ -1755,72 +1541,6 @@ static struct qcom_icc_bcm bcm_sn4 = { .nodes = { &qnm_usb_anoc }, }; -static struct qcom_icc_bcm bcm_acv_disp = { - .name = "ACV", - .num_nodes = 1, - .nodes = { &ebi_disp }, -}; - -static struct qcom_icc_bcm bcm_mc0_disp = { - .name = "MC0", - .num_nodes = 1, - .nodes = { &ebi_disp }, -}; - -static struct qcom_icc_bcm bcm_mm0_disp = { - .name = "MM0", - .num_nodes = 1, - .nodes = { &qns_mem_noc_hf_disp }, -}; - -static struct qcom_icc_bcm bcm_mm1_disp = { - .name = "MM1", - .num_nodes = 1, - .nodes = { &qnm_mdp_disp }, -}; - -static struct qcom_icc_bcm bcm_sh0_disp = { - .name = "SH0", - .num_nodes = 1, - .nodes = { &qns_llcc_disp }, -}; - -static struct qcom_icc_bcm bcm_sh1_disp = { - .name = "SH1", - .num_nodes = 2, - .nodes = { &qnm_mnoc_hf_disp, &qnm_pcie_disp }, -}; - -static struct qcom_icc_bcm bcm_acv_pcie = { - .name = "ACV", - .num_nodes = 1, - .nodes = { &ebi_pcie }, -}; - -static struct qcom_icc_bcm bcm_mc0_pcie = { - .name = "MC0", - .num_nodes = 1, - .nodes = { &ebi_pcie }, -}; - -static struct qcom_icc_bcm bcm_pc0_pcie = { - .name = "PC0", - .num_nodes = 1, - .nodes = { &qns_pcie_mem_noc_pcie }, -}; - -static struct qcom_icc_bcm bcm_sh0_pcie = { - .name = "SH0", - .num_nodes = 1, - .nodes = { &qns_llcc_pcie }, -}; - -static struct qcom_icc_bcm bcm_sh1_pcie = { - .name = "SH1", - .num_nodes = 1, - .nodes = { &qnm_pcie_pcie }, -}; - static struct qcom_icc_bcm *aggre1_noc_bcms[] = { }; @@ -1982,10 +1702,6 @@ static const struct qcom_icc_desc x1e80100_cnoc_main = { static struct qcom_icc_bcm * const gem_noc_bcms[] = { &bcm_sh0, &bcm_sh1, - &bcm_sh0_disp, - &bcm_sh1_disp, - &bcm_sh0_pcie, - &bcm_sh1_pcie, }; static struct qcom_icc_node * const gem_noc_nodes[] = { @@ -2004,11 +1720,6 @@ static struct qcom_icc_node * const gem_noc_nodes[] = { [SLAVE_GEM_NOC_CNOC] = &qns_gem_noc_cnoc, [SLAVE_LLCC] = &qns_llcc, [SLAVE_MEM_NOC_PCIE_SNOC] = &qns_pcie, - [MASTER_MNOC_HF_MEM_NOC_DISP] = &qnm_mnoc_hf_disp, - [MASTER_ANOC_PCIE_GEM_NOC_DISP] = &qnm_pcie_disp, - [SLAVE_LLCC_DISP] = &qns_llcc_disp, - [MASTER_ANOC_PCIE_GEM_NOC_PCIE] = &qnm_pcie_pcie, - [SLAVE_LLCC_PCIE] = &qns_llcc_pcie, }; static const struct qcom_icc_desc x1e80100_gem_noc = { @@ -2067,19 +1778,11 @@ static const struct qcom_icc_desc x1e80100_lpass_lpicx_noc = { static struct qcom_icc_bcm * const mc_virt_bcms[] = { &bcm_acv, &bcm_mc0, - &bcm_acv_disp, - &bcm_mc0_disp, - &bcm_acv_pcie, - &bcm_mc0_pcie, }; static struct qcom_icc_node * const mc_virt_nodes[] = { [MASTER_LLCC] = &llcc_mc, [SLAVE_EBI1] = &ebi, - [MASTER_LLCC_DISP] = &llcc_mc_disp, - [SLAVE_EBI1_DISP] = &ebi_disp, - [MASTER_LLCC_PCIE] = &llcc_mc_pcie, - [SLAVE_EBI1_PCIE] = &ebi_pcie, }; static const struct qcom_icc_desc x1e80100_mc_virt = { @@ -2092,8 +1795,6 @@ static const struct qcom_icc_desc x1e80100_mc_virt = { static struct qcom_icc_bcm * const mmss_noc_bcms[] = { &bcm_mm0, &bcm_mm1, - &bcm_mm0_disp, - &bcm_mm1_disp, }; static struct qcom_icc_node * const mmss_noc_nodes[] = { @@ -2110,8 +1811,6 @@ static struct qcom_icc_node * const mmss_noc_nodes[] = { [SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf, [SLAVE_MNOC_SF_MEM_NOC] = &qns_mem_noc_sf, [SLAVE_SERVICE_MNOC] = &srvc_mnoc, - [MASTER_MDP_DISP] = &qnm_mdp_disp, - [SLAVE_MNOC_HF_MEM_NOC_DISP] = &qns_mem_noc_hf_disp, }; static const struct qcom_icc_desc x1e80100_mmss_noc = { @@ -2139,16 +1838,12 @@ static const struct qcom_icc_desc x1e80100_nsp_noc = { static struct qcom_icc_bcm * const pcie_center_anoc_bcms[] = { &bcm_pc0, - &bcm_pc0_pcie, }; static struct qcom_icc_node * const pcie_center_anoc_nodes[] = { [MASTER_PCIE_NORTH] = &qnm_pcie_north_gem_noc, [MASTER_PCIE_SOUTH] = &qnm_pcie_south_gem_noc, [SLAVE_ANOC_PCIE_GEM_NOC] = &qns_pcie_mem_noc, - [MASTER_PCIE_NORTH_PCIE] = &qnm_pcie_north_gem_noc_pcie, - [MASTER_PCIE_SOUTH_PCIE] = &qnm_pcie_south_gem_noc_pcie, - [SLAVE_ANOC_PCIE_GEM_NOC_PCIE] = &qns_pcie_mem_noc_pcie, }; static const struct qcom_icc_desc x1e80100_pcie_center_anoc = { @@ -2166,10 +1861,6 @@ static struct qcom_icc_node * const pcie_north_anoc_nodes[] = { [MASTER_PCIE_4] = &xm_pcie_4, [MASTER_PCIE_5] = &xm_pcie_5, [SLAVE_PCIE_NORTH] = &qns_pcie_north_gem_noc, - [MASTER_PCIE_3_PCIE] = &xm_pcie_3_pcie, - [MASTER_PCIE_4_PCIE] = &xm_pcie_4_pcie, - [MASTER_PCIE_5_PCIE] = &xm_pcie_5_pcie, - [SLAVE_PCIE_NORTH_PCIE] = &qns_pcie_north_gem_noc_pcie, }; static const struct qcom_icc_desc x1e80100_pcie_north_anoc = { @@ -2189,12 +1880,6 @@ static struct qcom_icc_node * const pcie_south_anoc_nodes[] = { [MASTER_PCIE_6A] = &xm_pcie_6a, [MASTER_PCIE_6B] = &xm_pcie_6b, [SLAVE_PCIE_SOUTH] = &qns_pcie_south_gem_noc, - [MASTER_PCIE_0_PCIE] = &xm_pcie_0_pcie, - [MASTER_PCIE_1_PCIE] = &xm_pcie_1_pcie, - [MASTER_PCIE_2_PCIE] = &xm_pcie_2_pcie, - [MASTER_PCIE_6A_PCIE] = &xm_pcie_6a_pcie, - [MASTER_PCIE_6B_PCIE] = &xm_pcie_6b_pcie, - [SLAVE_PCIE_SOUTH_PCIE] = &qns_pcie_south_gem_noc_pcie, }; static const struct qcom_icc_desc x1e80100_pcie_south_anoc = { -- cgit v1.2.3 From ae1d892d518af5c092f2b1f8e6921996c6a95cb3 Mon Sep 17 00:00:00 2001 From: Erick Archer Date: Sun, 28 Jan 2024 12:27:22 +0100 Subject: bus: mhi: ep: Use kcalloc() instead of kzalloc() This is an effort to get rid of all multiplications from allocation functions in order to prevent integer overflows [1]. Here the multiplication is obviously safe because the "event_rings" member never can have a value greater than 255 (8 bits). This member is set twice using always FIELD_GET: mhi_cntrl->event_rings = FIELD_GET(MHICFG_NER_MASK, regval); mhi_cntrl->event_rings = FIELD_GET(MHICFG_NER_MASK, regval); And the MHICFG_NER_MASK macro defines the 8 bits mask that guarantees a maximum value of 255. However, using kcalloc() is more appropriate [1] and improves readability. This patch has no effect on runtime behavior. Link: https://github.com/KSPP/linux/issues/162 [1] Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Reviewed-by: Gustavo A. R. Silva Signed-off-by: Erick Archer Reviewed-by: Alex Elder Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240128112722.4334-1-erick.archer@gmx.com Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/ep/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c index 65fc1d738bec..8d7a4102bdb7 100644 --- a/drivers/bus/mhi/ep/main.c +++ b/drivers/bus/mhi/ep/main.c @@ -1149,8 +1149,9 @@ int mhi_ep_power_up(struct mhi_ep_cntrl *mhi_cntrl) mhi_ep_mmio_mask_interrupts(mhi_cntrl); mhi_ep_mmio_init(mhi_cntrl); - mhi_cntrl->mhi_event = kzalloc(mhi_cntrl->event_rings * (sizeof(*mhi_cntrl->mhi_event)), - GFP_KERNEL); + mhi_cntrl->mhi_event = kcalloc(mhi_cntrl->event_rings, + sizeof(*mhi_cntrl->mhi_event), + GFP_KERNEL); if (!mhi_cntrl->mhi_event) return -ENOMEM; -- cgit v1.2.3 From ceeb64f41fe6a1eb9fc56d583983a81f8f3dd058 Mon Sep 17 00:00:00 2001 From: Krishna chaitanya chundru Date: Tue, 6 Feb 2024 10:02:05 +0530 Subject: bus: mhi: host: Add tracing support This change adds ftrace support for following functions which helps in debugging the issues when there is Channel state & MHI state change and also when we receive data and control events: 1. mhi_intvec_mhi_states 2. mhi_process_data_event_ring 3. mhi_process_ctrl_ev_ring 4. mhi_gen_tre 5. mhi_update_channel_state 6. mhi_tryset_pm_state 7. mhi_pm_st_worker Change the implementation of the arrays which has enum to strings mapping to make it consistent in both trace header file and other files. Where ever the trace events are added, debug messages are removed. Signed-off-by: Krishna chaitanya chundru Reviewed-by: Manivannan Sadhasivam Reviewed-by: Steven Rostedt (Google) Link: https://lore.kernel.org/r/20240206-ftrace_support-v11-1-3f71dc187544@quicinc.com Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/common.h | 38 +++--- drivers/bus/mhi/host/init.c | 64 +++++---- drivers/bus/mhi/host/internal.h | 41 ++++++ drivers/bus/mhi/host/main.c | 19 ++- drivers/bus/mhi/host/pm.c | 7 +- drivers/bus/mhi/host/trace.h | 280 ++++++++++++++++++++++++++++++++++++++++ 6 files changed, 384 insertions(+), 65 deletions(-) create mode 100644 drivers/bus/mhi/host/trace.h (limited to 'drivers') diff --git a/drivers/bus/mhi/common.h b/drivers/bus/mhi/common.h index f794b9c8049e..dda340aaed95 100644 --- a/drivers/bus/mhi/common.h +++ b/drivers/bus/mhi/common.h @@ -297,30 +297,30 @@ struct mhi_ring_element { __le32 dword[2]; }; +#define MHI_STATE_LIST \ + mhi_state(RESET, "RESET") \ + mhi_state(READY, "READY") \ + mhi_state(M0, "M0") \ + mhi_state(M1, "M1") \ + mhi_state(M2, "M2") \ + mhi_state(M3, "M3") \ + mhi_state(M3_FAST, "M3_FAST") \ + mhi_state(BHI, "BHI") \ + mhi_state_end(SYS_ERR, "SYS ERROR") + +#undef mhi_state +#undef mhi_state_end + +#define mhi_state(a, b) case MHI_STATE_##a: return b; +#define mhi_state_end(a, b) case MHI_STATE_##a: return b; + static inline const char *mhi_state_str(enum mhi_state state) { switch (state) { - case MHI_STATE_RESET: - return "RESET"; - case MHI_STATE_READY: - return "READY"; - case MHI_STATE_M0: - return "M0"; - case MHI_STATE_M1: - return "M1"; - case MHI_STATE_M2: - return "M2"; - case MHI_STATE_M3: - return "M3"; - case MHI_STATE_M3_FAST: - return "M3 FAST"; - case MHI_STATE_BHI: - return "BHI"; - case MHI_STATE_SYS_ERR: - return "SYS ERROR"; + MHI_STATE_LIST default: return "Unknown state"; } -}; +} #endif /* _MHI_COMMON_H */ diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c index 6d3b045ab259..944da46e6f11 100644 --- a/drivers/bus/mhi/host/init.c +++ b/drivers/bus/mhi/host/init.c @@ -20,51 +20,49 @@ #include #include "internal.h" +#define CREATE_TRACE_POINTS +#include "trace.h" + static DEFINE_IDA(mhi_controller_ida); +#undef mhi_ee +#undef mhi_ee_end + +#define mhi_ee(a, b) [MHI_EE_##a] = b, +#define mhi_ee_end(a, b) [MHI_EE_##a] = b, + const char * const mhi_ee_str[MHI_EE_MAX] = { - [MHI_EE_PBL] = "PRIMARY BOOTLOADER", - [MHI_EE_SBL] = "SECONDARY BOOTLOADER", - [MHI_EE_AMSS] = "MISSION MODE", - [MHI_EE_RDDM] = "RAMDUMP DOWNLOAD MODE", - [MHI_EE_WFW] = "WLAN FIRMWARE", - [MHI_EE_PTHRU] = "PASS THROUGH", - [MHI_EE_EDL] = "EMERGENCY DOWNLOAD", - [MHI_EE_FP] = "FLASH PROGRAMMER", - [MHI_EE_DISABLE_TRANSITION] = "DISABLE", - [MHI_EE_NOT_SUPPORTED] = "NOT SUPPORTED", + MHI_EE_LIST }; +#undef dev_st_trans +#undef dev_st_trans_end + +#define dev_st_trans(a, b) [DEV_ST_TRANSITION_##a] = b, +#define dev_st_trans_end(a, b) [DEV_ST_TRANSITION_##a] = b, + const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX] = { - [DEV_ST_TRANSITION_PBL] = "PBL", - [DEV_ST_TRANSITION_READY] = "READY", - [DEV_ST_TRANSITION_SBL] = "SBL", - [DEV_ST_TRANSITION_MISSION_MODE] = "MISSION MODE", - [DEV_ST_TRANSITION_FP] = "FLASH PROGRAMMER", - [DEV_ST_TRANSITION_SYS_ERR] = "SYS ERROR", - [DEV_ST_TRANSITION_DISABLE] = "DISABLE", + DEV_ST_TRANSITION_LIST }; +#undef ch_state_type +#undef ch_state_type_end + +#define ch_state_type(a, b) [MHI_CH_STATE_TYPE_##a] = b, +#define ch_state_type_end(a, b) [MHI_CH_STATE_TYPE_##a] = b, + const char * const mhi_ch_state_type_str[MHI_CH_STATE_TYPE_MAX] = { - [MHI_CH_STATE_TYPE_RESET] = "RESET", - [MHI_CH_STATE_TYPE_STOP] = "STOP", - [MHI_CH_STATE_TYPE_START] = "START", + MHI_CH_STATE_TYPE_LIST }; +#undef mhi_pm_state +#undef mhi_pm_state_end + +#define mhi_pm_state(a, b) [MHI_PM_STATE_##a] = b, +#define mhi_pm_state_end(a, b) [MHI_PM_STATE_##a] = b, + static const char * const mhi_pm_state_str[] = { - [MHI_PM_STATE_DISABLE] = "DISABLE", - [MHI_PM_STATE_POR] = "POWER ON RESET", - [MHI_PM_STATE_M0] = "M0", - [MHI_PM_STATE_M2] = "M2", - [MHI_PM_STATE_M3_ENTER] = "M?->M3", - [MHI_PM_STATE_M3] = "M3", - [MHI_PM_STATE_M3_EXIT] = "M3->M0", - [MHI_PM_STATE_FW_DL_ERR] = "Firmware Download Error", - [MHI_PM_STATE_SYS_ERR_DETECT] = "SYS ERROR Detect", - [MHI_PM_STATE_SYS_ERR_PROCESS] = "SYS ERROR Process", - [MHI_PM_STATE_SYS_ERR_FAIL] = "SYS ERROR Failure", - [MHI_PM_STATE_SHUTDOWN_PROCESS] = "SHUTDOWN Process", - [MHI_PM_STATE_LD_ERR_FATAL_DETECT] = "Linkdown or Error Fatal Detect", + MHI_PM_STATE_LIST }; const char *to_mhi_pm_state_str(u32 state) diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h index 4b6deea17bcd..091244cf17c6 100644 --- a/drivers/bus/mhi/host/internal.h +++ b/drivers/bus/mhi/host/internal.h @@ -42,6 +42,11 @@ enum mhi_ch_state_type { MHI_CH_STATE_TYPE_MAX, }; +#define MHI_CH_STATE_TYPE_LIST \ + ch_state_type(RESET, "RESET") \ + ch_state_type(STOP, "STOP") \ + ch_state_type_end(START, "START") + extern const char * const mhi_ch_state_type_str[MHI_CH_STATE_TYPE_MAX]; #define TO_CH_STATE_TYPE_STR(state) (((state) >= MHI_CH_STATE_TYPE_MAX) ? \ "INVALID_STATE" : \ @@ -50,6 +55,18 @@ extern const char * const mhi_ch_state_type_str[MHI_CH_STATE_TYPE_MAX]; #define MHI_INVALID_BRSTMODE(mode) (mode != MHI_DB_BRST_DISABLE && \ mode != MHI_DB_BRST_ENABLE) +#define MHI_EE_LIST \ + mhi_ee(PBL, "PRIMARY BOOTLOADER") \ + mhi_ee(SBL, "SECONDARY BOOTLOADER") \ + mhi_ee(AMSS, "MISSION MODE") \ + mhi_ee(RDDM, "RAMDUMP DOWNLOAD MODE")\ + mhi_ee(WFW, "WLAN FIRMWARE") \ + mhi_ee(PTHRU, "PASS THROUGH") \ + mhi_ee(EDL, "EMERGENCY DOWNLOAD") \ + mhi_ee(FP, "FLASH PROGRAMMER") \ + mhi_ee(DISABLE_TRANSITION, "DISABLE") \ + mhi_ee_end(NOT_SUPPORTED, "NOT SUPPORTED") + extern const char * const mhi_ee_str[MHI_EE_MAX]; #define TO_MHI_EXEC_STR(ee) (((ee) >= MHI_EE_MAX) ? \ "INVALID_EE" : mhi_ee_str[ee]) @@ -72,6 +89,15 @@ enum dev_st_transition { DEV_ST_TRANSITION_MAX, }; +#define DEV_ST_TRANSITION_LIST \ + dev_st_trans(PBL, "PBL") \ + dev_st_trans(READY, "READY") \ + dev_st_trans(SBL, "SBL") \ + dev_st_trans(MISSION_MODE, "MISSION MODE") \ + dev_st_trans(FP, "FLASH PROGRAMMER") \ + dev_st_trans(SYS_ERR, "SYS ERROR") \ + dev_st_trans_end(DISABLE, "DISABLE") + extern const char * const dev_state_tran_str[DEV_ST_TRANSITION_MAX]; #define TO_DEV_STATE_TRANS_STR(state) (((state) >= DEV_ST_TRANSITION_MAX) ? \ "INVALID_STATE" : dev_state_tran_str[state]) @@ -94,6 +120,21 @@ enum mhi_pm_state { MHI_PM_STATE_MAX }; +#define MHI_PM_STATE_LIST \ + mhi_pm_state(DISABLE, "DISABLE") \ + mhi_pm_state(POR, "POWER ON RESET") \ + mhi_pm_state(M0, "M0") \ + mhi_pm_state(M2, "M2") \ + mhi_pm_state(M3_ENTER, "M?->M3") \ + mhi_pm_state(M3, "M3") \ + mhi_pm_state(M3_EXIT, "M3->M0") \ + mhi_pm_state(FW_DL_ERR, "Firmware Download Error") \ + mhi_pm_state(SYS_ERR_DETECT, "SYS ERROR Detect") \ + mhi_pm_state(SYS_ERR_PROCESS, "SYS ERROR Process") \ + mhi_pm_state(SYS_ERR_FAIL, "SYS ERROR Failure") \ + mhi_pm_state(SHUTDOWN_PROCESS, "SHUTDOWN Process") \ + mhi_pm_state_end(LD_ERR_FATAL_DETECT, "Linkdown or Error Fatal Detect") + #define MHI_PM_DISABLE BIT(0) #define MHI_PM_POR BIT(1) #define MHI_PM_M0 BIT(2) diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c index abb561db9ae1..2d38f6005da6 100644 --- a/drivers/bus/mhi/host/main.c +++ b/drivers/bus/mhi/host/main.c @@ -15,6 +15,7 @@ #include #include #include "internal.h" +#include "trace.h" int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl, void __iomem *base, u32 offset, u32 *out) @@ -493,11 +494,8 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv) state = mhi_get_mhi_state(mhi_cntrl); ee = mhi_get_exec_env(mhi_cntrl); - dev_dbg(dev, "local ee: %s state: %s device ee: %s state: %s\n", - TO_MHI_EXEC_STR(mhi_cntrl->ee), - mhi_state_str(mhi_cntrl->dev_state), - TO_MHI_EXEC_STR(ee), mhi_state_str(state)); + trace_mhi_intvec_states(mhi_cntrl, ee, state); if (state == MHI_STATE_SYS_ERR) { dev_dbg(dev, "System error detected\n"); pm_state = mhi_tryset_pm_state(mhi_cntrl, @@ -838,6 +836,8 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl, while (dev_rp != local_rp) { enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp); + trace_mhi_ctrl_event(mhi_cntrl, local_rp); + switch (type) { case MHI_PKT_TYPE_BW_REQ_EVENT: { @@ -1003,6 +1003,8 @@ int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl, while (dev_rp != local_rp && event_quota > 0) { enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp); + trace_mhi_data_event(mhi_cntrl, local_rp); + chan = MHI_TRE_GET_EV_CHID(local_rp); WARN_ON(chan >= mhi_cntrl->max_chan); @@ -1243,6 +1245,7 @@ int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, mhi_tre->dword[0] = MHI_TRE_DATA_DWORD0(info->len); mhi_tre->dword[1] = MHI_TRE_DATA_DWORD1(bei, eot, eob, chain); + trace_mhi_gen_tre(mhi_cntrl, mhi_chan, mhi_tre); /* increment WP */ mhi_add_ring_element(mhi_cntrl, tre_ring); mhi_add_ring_element(mhi_cntrl, buf_ring); @@ -1337,9 +1340,7 @@ static int mhi_update_channel_state(struct mhi_controller *mhi_cntrl, enum mhi_cmd_type cmd = MHI_CMD_NOP; int ret; - dev_dbg(dev, "%d: Updating channel state to: %s\n", mhi_chan->chan, - TO_CH_STATE_TYPE_STR(to_state)); - + trace_mhi_channel_command_start(mhi_cntrl, mhi_chan, to_state, "Updating"); switch (to_state) { case MHI_CH_STATE_TYPE_RESET: write_lock_irq(&mhi_chan->lock); @@ -1406,9 +1407,7 @@ static int mhi_update_channel_state(struct mhi_controller *mhi_cntrl, write_unlock_irq(&mhi_chan->lock); } - dev_dbg(dev, "%d: Channel state change to %s successful\n", - mhi_chan->chan, TO_CH_STATE_TYPE_STR(to_state)); - + trace_mhi_channel_command_end(mhi_cntrl, mhi_chan, to_state, "Updated"); exit_channel_update: mhi_cntrl->runtime_put(mhi_cntrl); mhi_device_put(mhi_cntrl->mhi_dev); diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c index d0d033ce9984..8b40d3f01acc 100644 --- a/drivers/bus/mhi/host/pm.c +++ b/drivers/bus/mhi/host/pm.c @@ -15,6 +15,7 @@ #include #include #include "internal.h" +#include "trace.h" /* * Not all MHI state transitions are synchronous. Transitions like Linkdown, @@ -131,6 +132,7 @@ enum mhi_pm_state __must_check mhi_tryset_pm_state(struct mhi_controller *mhi_cn if (unlikely(!(dev_state_transitions[index].to_states & state))) return cur_state; + trace_mhi_tryset_pm_state(mhi_cntrl, state); mhi_cntrl->pm_state = state; return mhi_cntrl->pm_state; } @@ -772,7 +774,6 @@ void mhi_pm_st_worker(struct work_struct *work) struct mhi_controller *mhi_cntrl = container_of(work, struct mhi_controller, st_worker); - struct device *dev = &mhi_cntrl->mhi_dev->dev; spin_lock_irq(&mhi_cntrl->transition_lock); list_splice_tail_init(&mhi_cntrl->transition_list, &head); @@ -780,8 +781,8 @@ void mhi_pm_st_worker(struct work_struct *work) list_for_each_entry_safe(itr, tmp, &head, node) { list_del(&itr->node); - dev_dbg(dev, "Handling state transition: %s\n", - TO_DEV_STATE_TRANS_STR(itr->state)); + + trace_mhi_pm_st_transition(mhi_cntrl, itr->state); switch (itr->state) { case DEV_ST_TRANSITION_PBL: diff --git a/drivers/bus/mhi/host/trace.h b/drivers/bus/mhi/host/trace.h new file mode 100644 index 000000000000..d12a98d44272 --- /dev/null +++ b/drivers/bus/mhi/host/trace.h @@ -0,0 +1,280 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM mhi_host + +#if !defined(_TRACE_EVENT_MHI_HOST_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_EVENT_MHI_HOST_H + +#include +#include +#include "../common.h" +#include "internal.h" + +#undef mhi_state +#undef mhi_state_end + +#define mhi_state(a, b) TRACE_DEFINE_ENUM(MHI_STATE_##a); +#define mhi_state_end(a, b) TRACE_DEFINE_ENUM(MHI_STATE_##a); + +MHI_STATE_LIST + +#undef mhi_state +#undef mhi_state_end + +#define mhi_state(a, b) { MHI_STATE_##a, b }, +#define mhi_state_end(a, b) { MHI_STATE_##a, b } + +#undef mhi_pm_state +#undef mhi_pm_state_end + +#define mhi_pm_state(a, b) TRACE_DEFINE_ENUM(MHI_PM_STATE_##a); +#define mhi_pm_state_end(a, b) TRACE_DEFINE_ENUM(MHI_PM_STATE_##a); + +MHI_PM_STATE_LIST + +#undef mhi_pm_state +#undef mhi_pm_state_end + +#define mhi_pm_state(a, b) { MHI_PM_STATE_##a, b }, +#define mhi_pm_state_end(a, b) { MHI_PM_STATE_##a, b } + +#undef mhi_ee +#undef mhi_ee_end + +#define mhi_ee(a, b) TRACE_DEFINE_ENUM(MHI_EE_##a); +#define mhi_ee_end(a, b) TRACE_DEFINE_ENUM(MHI_EE_##a); + +MHI_EE_LIST + +#undef mhi_ee +#undef mhi_ee_end + +#define mhi_ee(a, b) { MHI_EE_##a, b }, +#define mhi_ee_end(a, b) { MHI_EE_##a, b } + +#undef ch_state_type +#undef ch_state_type_end + +#define ch_state_type(a, b) TRACE_DEFINE_ENUM(MHI_CH_STATE_TYPE_##a); +#define ch_state_type_end(a, b) TRACE_DEFINE_ENUM(MHI_CH_STATE_TYPE_##a); + +MHI_CH_STATE_TYPE_LIST + +#undef ch_state_type +#undef ch_state_type_end + +#define ch_state_type(a, b) { MHI_CH_STATE_TYPE_##a, b }, +#define ch_state_type_end(a, b) { MHI_CH_STATE_TYPE_##a, b } + +#undef dev_st_trans +#undef dev_st_trans_end + +#define dev_st_trans(a, b) TRACE_DEFINE_ENUM(DEV_ST_TRANSITION_##a); +#define dev_st_trans_end(a, b) TRACE_DEFINE_ENUM(DEV_ST_TRANSITION_##a); + +DEV_ST_TRANSITION_LIST + +#undef dev_st_trans +#undef dev_st_trans_end + +#define dev_st_trans(a, b) { DEV_ST_TRANSITION_##a, b }, +#define dev_st_trans_end(a, b) { DEV_ST_TRANSITION_##a, b } + +TRACE_EVENT(mhi_gen_tre, + + TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, + struct mhi_ring_element *mhi_tre), + + TP_ARGS(mhi_cntrl, mhi_chan, mhi_tre), + + TP_STRUCT__entry( + __string(name, mhi_cntrl->mhi_dev->name) + __field(int, ch_num) + __field(void *, wp) + __field(__le64, tre_ptr) + __field(__le32, dword0) + __field(__le32, dword1) + ), + + TP_fast_assign( + __assign_str(name, mhi_cntrl->mhi_dev->name); + __entry->ch_num = mhi_chan->chan; + __entry->wp = mhi_tre; + __entry->tre_ptr = mhi_tre->ptr; + __entry->dword0 = mhi_tre->dword[0]; + __entry->dword1 = mhi_tre->dword[1]; + ), + + TP_printk("%s: Chan: %d TRE: 0x%p TRE buf: 0x%llx DWORD0: 0x%08x DWORD1: 0x%08x\n", + __get_str(name), __entry->ch_num, __entry->wp, __entry->tre_ptr, + __entry->dword0, __entry->dword1) +); + +TRACE_EVENT(mhi_intvec_states, + + TP_PROTO(struct mhi_controller *mhi_cntrl, int dev_ee, int dev_state), + + TP_ARGS(mhi_cntrl, dev_ee, dev_state), + + TP_STRUCT__entry( + __string(name, mhi_cntrl->mhi_dev->name) + __field(int, local_ee) + __field(int, state) + __field(int, dev_ee) + __field(int, dev_state) + ), + + TP_fast_assign( + __assign_str(name, mhi_cntrl->mhi_dev->name); + __entry->local_ee = mhi_cntrl->ee; + __entry->state = mhi_cntrl->dev_state; + __entry->dev_ee = dev_ee; + __entry->dev_state = dev_state; + ), + + TP_printk("%s: Local EE: %s State: %s Device EE: %s Dev State: %s\n", + __get_str(name), + __print_symbolic(__entry->local_ee, MHI_EE_LIST), + __print_symbolic(__entry->state, MHI_STATE_LIST), + __print_symbolic(__entry->dev_ee, MHI_EE_LIST), + __print_symbolic(__entry->dev_state, MHI_STATE_LIST)) +); + +TRACE_EVENT(mhi_tryset_pm_state, + + TP_PROTO(struct mhi_controller *mhi_cntrl, int pm_state), + + TP_ARGS(mhi_cntrl, pm_state), + + TP_STRUCT__entry( + __string(name, mhi_cntrl->mhi_dev->name) + __field(int, pm_state) + ), + + TP_fast_assign( + __assign_str(name, mhi_cntrl->mhi_dev->name); + if (pm_state) + pm_state = __fls(pm_state); + __entry->pm_state = pm_state; + ), + + TP_printk("%s: PM state: %s\n", __get_str(name), + __print_symbolic(__entry->pm_state, MHI_PM_STATE_LIST)) +); + +DECLARE_EVENT_CLASS(mhi_process_event_ring, + + TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_ring_element *rp), + + TP_ARGS(mhi_cntrl, rp), + + TP_STRUCT__entry( + __string(name, mhi_cntrl->mhi_dev->name) + __field(__le32, dword0) + __field(__le32, dword1) + __field(int, state) + __field(__le64, ptr) + __field(void *, rp) + ), + + TP_fast_assign( + __assign_str(name, mhi_cntrl->mhi_dev->name); + __entry->rp = rp; + __entry->ptr = rp->ptr; + __entry->dword0 = rp->dword[0]; + __entry->dword1 = rp->dword[1]; + __entry->state = MHI_TRE_GET_EV_STATE(rp); + ), + + TP_printk("%s: TRE: 0x%p TRE buf: 0x%llx DWORD0: 0x%08x DWORD1: 0x%08x State: %s\n", + __get_str(name), __entry->rp, __entry->ptr, __entry->dword0, + __entry->dword1, __print_symbolic(__entry->state, MHI_STATE_LIST)) +); + +DEFINE_EVENT(mhi_process_event_ring, mhi_data_event, + + TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_ring_element *rp), + + TP_ARGS(mhi_cntrl, rp) +); + +DEFINE_EVENT(mhi_process_event_ring, mhi_ctrl_event, + + TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_ring_element *rp), + + TP_ARGS(mhi_cntrl, rp) +); + +DECLARE_EVENT_CLASS(mhi_update_channel_state, + + TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, int state, + const char *reason), + + TP_ARGS(mhi_cntrl, mhi_chan, state, reason), + + TP_STRUCT__entry( + __string(name, mhi_cntrl->mhi_dev->name) + __field(int, ch_num) + __field(int, state) + __field(const char *, reason) + ), + + TP_fast_assign( + __assign_str(name, mhi_cntrl->mhi_dev->name); + __entry->ch_num = mhi_chan->chan; + __entry->state = state; + __entry->reason = reason; + ), + + TP_printk("%s: chan%d: %s state to: %s\n", + __get_str(name), __entry->ch_num, __entry->reason, + __print_symbolic(__entry->state, MHI_CH_STATE_TYPE_LIST)) +); + +DEFINE_EVENT(mhi_update_channel_state, mhi_channel_command_start, + + TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, int state, + const char *reason), + + TP_ARGS(mhi_cntrl, mhi_chan, state, reason) +); + +DEFINE_EVENT(mhi_update_channel_state, mhi_channel_command_end, + + TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, int state, + const char *reason), + + TP_ARGS(mhi_cntrl, mhi_chan, state, reason) +); + +TRACE_EVENT(mhi_pm_st_transition, + + TP_PROTO(struct mhi_controller *mhi_cntrl, int state), + + TP_ARGS(mhi_cntrl, state), + + TP_STRUCT__entry( + __string(name, mhi_cntrl->mhi_dev->name) + __field(int, state) + ), + + TP_fast_assign( + __assign_str(name, mhi_cntrl->mhi_dev->name); + __entry->state = state; + ), + + TP_printk("%s: Handling state transition: %s\n", __get_str(name), + __print_symbolic(__entry->state, DEV_ST_TRANSITION_LIST)) +); + +#endif +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH ../../drivers/bus/mhi/host +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include -- cgit v1.2.3 From 5f1b39718d38276d7e4c65282dae480f6b2e1976 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Feb 2024 11:50:51 +0100 Subject: interconnect: qcom: msm8909: constify pointer to qcom_icc_node Pointers to struct qcom_icc_node are const. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Andrew Halaney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240208105056.128448-2-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/msm8909.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/msm8909.c b/drivers/interconnect/qcom/msm8909.c index 23b1a818d774..0d0cd7282f5b 100644 --- a/drivers/interconnect/qcom/msm8909.c +++ b/drivers/interconnect/qcom/msm8909.c @@ -1167,7 +1167,7 @@ static struct qcom_icc_node slv_cats_1 = { .qos.qos_mode = NOC_QOS_MODE_INVALID, }; -static struct qcom_icc_node *msm8909_bimc_nodes[] = { +static struct qcom_icc_node * const msm8909_bimc_nodes[] = { [MAS_APPS_PROC] = &mas_apps_proc, [MAS_OXILI] = &mas_oxili, [MAS_SNOC_BIMC_0] = &mas_snoc_bimc_0, @@ -1196,7 +1196,7 @@ static const struct qcom_icc_desc msm8909_bimc = { .ab_coeff = 154, }; -static struct qcom_icc_node *msm8909_pcnoc_nodes[] = { +static struct qcom_icc_node * const msm8909_pcnoc_nodes[] = { [MAS_AUDIO] = &mas_audio, [MAS_SPDM] = &mas_spdm, [MAS_DEHR] = &mas_dehr, @@ -1263,7 +1263,7 @@ static const struct qcom_icc_desc msm8909_pcnoc = { .qos_offset = 0x7000, }; -static struct qcom_icc_node *msm8909_snoc_nodes[] = { +static struct qcom_icc_node * const msm8909_snoc_nodes[] = { [MAS_QDSS_BAM] = &mas_qdss_bam, [MAS_BIMC_SNOC] = &mas_bimc_snoc, [MAS_MDP] = &mas_mdp, -- cgit v1.2.3 From 79144087d9d165a65106ca90468c122184bab070 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Feb 2024 11:50:52 +0100 Subject: interconnect: qcom: sa8775p: constify pointer to qcom_icc_node Pointers to struct qcom_icc_node are const. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Andrew Halaney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240208105056.128448-3-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sa8775p.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sa8775p.c b/drivers/interconnect/qcom/sa8775p.c index dd6281db08ad..fe1b11041e6a 100644 --- a/drivers/interconnect/qcom/sa8775p.c +++ b/drivers/interconnect/qcom/sa8775p.c @@ -2096,7 +2096,7 @@ static struct qcom_icc_bcm *aggre1_noc_bcms[] = { &bcm_sn3, }; -static struct qcom_icc_node *aggre1_noc_nodes[] = { +static struct qcom_icc_node * const aggre1_noc_nodes[] = { [MASTER_QUP_3] = &qxm_qup3, [MASTER_EMAC] = &xm_emac_0, [MASTER_EMAC_1] = &xm_emac_1, @@ -2120,7 +2120,7 @@ static struct qcom_icc_bcm *aggre2_noc_bcms[] = { &bcm_sn4, }; -static struct qcom_icc_node *aggre2_noc_nodes[] = { +static struct qcom_icc_node * const aggre2_noc_nodes[] = { [MASTER_QDSS_BAM] = &qhm_qdss_bam, [MASTER_QUP_0] = &qhm_qup0, [MASTER_QUP_1] = &qhm_qup1, @@ -2148,7 +2148,7 @@ static struct qcom_icc_bcm *clk_virt_bcms[] = { &bcm_qup2, }; -static struct qcom_icc_node *clk_virt_nodes[] = { +static struct qcom_icc_node * const clk_virt_nodes[] = { [MASTER_QUP_CORE_0] = &qup0_core_master, [MASTER_QUP_CORE_1] = &qup1_core_master, [MASTER_QUP_CORE_2] = &qup2_core_master, @@ -2175,7 +2175,7 @@ static struct qcom_icc_bcm *config_noc_bcms[] = { &bcm_sn10, }; -static struct qcom_icc_node *config_noc_nodes[] = { +static struct qcom_icc_node * const config_noc_nodes[] = { [MASTER_GEM_NOC_CNOC] = &qnm_gemnoc_cnoc, [MASTER_GEM_NOC_PCIE_SNOC] = &qnm_gemnoc_pcie, [SLAVE_AHB2PHY_0] = &qhs_ahb2phy0, @@ -2274,7 +2274,7 @@ static const struct qcom_icc_desc sa8775p_config_noc = { static struct qcom_icc_bcm *dc_noc_bcms[] = { }; -static struct qcom_icc_node *dc_noc_nodes[] = { +static struct qcom_icc_node * const dc_noc_nodes[] = { [MASTER_CNOC_DC_NOC] = &qnm_cnoc_dc_noc, [SLAVE_LLCC_CFG] = &qhs_llcc, [SLAVE_GEM_NOC_CFG] = &qns_gemnoc, @@ -2292,7 +2292,7 @@ static struct qcom_icc_bcm *gem_noc_bcms[] = { &bcm_sh2, }; -static struct qcom_icc_node *gem_noc_nodes[] = { +static struct qcom_icc_node * const gem_noc_nodes[] = { [MASTER_GPU_TCU] = &alm_gpu_tcu, [MASTER_PCIE_TCU] = &alm_pcie_tcu, [MASTER_SYS_TCU] = &alm_sys_tcu, @@ -2328,7 +2328,7 @@ static struct qcom_icc_bcm *gpdsp_anoc_bcms[] = { &bcm_gnb0, }; -static struct qcom_icc_node *gpdsp_anoc_nodes[] = { +static struct qcom_icc_node * const gpdsp_anoc_nodes[] = { [MASTER_DSP0] = &qxm_dsp0, [MASTER_DSP1] = &qxm_dsp1, [SLAVE_GP_DSP_SAIL_NOC] = &qns_gp_dsp_sail_noc, @@ -2345,7 +2345,7 @@ static struct qcom_icc_bcm *lpass_ag_noc_bcms[] = { &bcm_sn9, }; -static struct qcom_icc_node *lpass_ag_noc_nodes[] = { +static struct qcom_icc_node * const lpass_ag_noc_nodes[] = { [MASTER_CNOC_LPASS_AG_NOC] = &qhm_config_noc, [MASTER_LPASS_PROC] = &qxm_lpass_dsp, [SLAVE_LPASS_CORE_CFG] = &qhs_lpass_core, @@ -2369,7 +2369,7 @@ static struct qcom_icc_bcm *mc_virt_bcms[] = { &bcm_mc0, }; -static struct qcom_icc_node *mc_virt_nodes[] = { +static struct qcom_icc_node * const mc_virt_nodes[] = { [MASTER_LLCC] = &llcc_mc, [SLAVE_EBI1] = &ebi, }; @@ -2386,7 +2386,7 @@ static struct qcom_icc_bcm *mmss_noc_bcms[] = { &bcm_mm1, }; -static struct qcom_icc_node *mmss_noc_nodes[] = { +static struct qcom_icc_node * const mmss_noc_nodes[] = { [MASTER_CAMNOC_HF] = &qnm_camnoc_hf, [MASTER_CAMNOC_ICP] = &qnm_camnoc_icp, [MASTER_CAMNOC_SF] = &qnm_camnoc_sf, @@ -2418,7 +2418,7 @@ static struct qcom_icc_bcm *nspa_noc_bcms[] = { &bcm_nsa1, }; -static struct qcom_icc_node *nspa_noc_nodes[] = { +static struct qcom_icc_node * const nspa_noc_nodes[] = { [MASTER_CDSP_NOC_CFG] = &qhm_nsp_noc_config, [MASTER_CDSP_PROC] = &qxm_nsp, [SLAVE_HCP_A] = &qns_hcp, @@ -2438,7 +2438,7 @@ static struct qcom_icc_bcm *nspb_noc_bcms[] = { &bcm_nsb1, }; -static struct qcom_icc_node *nspb_noc_nodes[] = { +static struct qcom_icc_node * const nspb_noc_nodes[] = { [MASTER_CDSPB_NOC_CFG] = &qhm_nspb_noc_config, [MASTER_CDSP_PROC_B] = &qxm_nspb, [SLAVE_CDSPB_MEM_NOC] = &qns_nspb_gemnoc, @@ -2457,7 +2457,7 @@ static struct qcom_icc_bcm *pcie_anoc_bcms[] = { &bcm_pci0, }; -static struct qcom_icc_node *pcie_anoc_nodes[] = { +static struct qcom_icc_node * const pcie_anoc_nodes[] = { [MASTER_PCIE_0] = &xm_pcie3_0, [MASTER_PCIE_1] = &xm_pcie3_1, [SLAVE_ANOC_PCIE_GEM_NOC] = &qns_pcie_mem_noc, @@ -2478,7 +2478,7 @@ static struct qcom_icc_bcm *system_noc_bcms[] = { &bcm_sn9, }; -static struct qcom_icc_node *system_noc_nodes[] = { +static struct qcom_icc_node * const system_noc_nodes[] = { [MASTER_GIC_AHB] = &qhm_gic, [MASTER_A1NOC_SNOC] = &qnm_aggre1_noc, [MASTER_A2NOC_SNOC] = &qnm_aggre2_noc, -- cgit v1.2.3 From bf6c62fb80d67cf00635d4d2fec6f8d9aad517cf Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Feb 2024 11:50:53 +0100 Subject: interconnect: qcom: sm8250: constify pointer to qcom_icc_node Pointers to struct qcom_icc_node are const. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Andrew Halaney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240208105056.128448-4-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sm8250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sm8250.c b/drivers/interconnect/qcom/sm8250.c index 02d40eea0d69..1879fa15761f 100644 --- a/drivers/interconnect/qcom/sm8250.c +++ b/drivers/interconnect/qcom/sm8250.c @@ -1673,7 +1673,7 @@ static struct qcom_icc_bcm * const qup_virt_bcms[] = { &bcm_qup0, }; -static struct qcom_icc_node *qup_virt_nodes[] = { +static struct qcom_icc_node * const qup_virt_nodes[] = { [MASTER_QUP_CORE_0] = &qup0_core_master, [MASTER_QUP_CORE_1] = &qup1_core_master, [MASTER_QUP_CORE_2] = &qup2_core_master, -- cgit v1.2.3 From 57d6c77e02b7f381d3c5e83154fa69b6c060d222 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Feb 2024 11:50:54 +0100 Subject: interconnect: qcom: sm6115: constify pointer to qcom_icc_node Pointers to struct qcom_icc_node are const. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Andrew Halaney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240208105056.128448-5-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sm6115.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sm6115.c b/drivers/interconnect/qcom/sm6115.c index 88b67634aa2f..7e15ddf0a80a 100644 --- a/drivers/interconnect/qcom/sm6115.c +++ b/drivers/interconnect/qcom/sm6115.c @@ -1193,7 +1193,7 @@ static struct qcom_icc_node slv_anoc_snoc = { .links = slv_anoc_snoc_links, }; -static struct qcom_icc_node *bimc_nodes[] = { +static struct qcom_icc_node * const bimc_nodes[] = { [MASTER_AMPSS_M0] = &apps_proc, [MASTER_SNOC_BIMC_RT] = &mas_snoc_bimc_rt, [MASTER_SNOC_BIMC_NRT] = &mas_snoc_bimc_nrt, @@ -1223,7 +1223,7 @@ static const struct qcom_icc_desc sm6115_bimc = { .ab_coeff = 153, }; -static struct qcom_icc_node *config_noc_nodes[] = { +static struct qcom_icc_node * const config_noc_nodes[] = { [SNOC_CNOC_MAS] = &mas_snoc_cnoc, [MASTER_QDSS_DAP] = &xm_dap, [SLAVE_AHB2PHY_USB] = &qhs_ahb2phy_usb, @@ -1294,7 +1294,7 @@ static const struct qcom_icc_desc sm6115_config_noc = { .keep_alive = true, }; -static struct qcom_icc_node *sys_noc_nodes[] = { +static struct qcom_icc_node * const sys_noc_nodes[] = { [MASTER_CRYPTO_CORE0] = &crypto_c0, [MASTER_SNOC_CFG] = &qhm_snoc_cfg, [MASTER_TIC] = &qhm_tic, @@ -1339,7 +1339,7 @@ static const struct qcom_icc_desc sm6115_sys_noc = { .keep_alive = true, }; -static struct qcom_icc_node *clk_virt_nodes[] = { +static struct qcom_icc_node * const clk_virt_nodes[] = { [MASTER_QUP_CORE_0] = &qup0_core_master, [SLAVE_QUP_CORE_0] = &qup0_core_slave, }; @@ -1353,7 +1353,7 @@ static const struct qcom_icc_desc sm6115_clk_virt = { .keep_alive = true, }; -static struct qcom_icc_node *mmnrt_virt_nodes[] = { +static struct qcom_icc_node * const mmnrt_virt_nodes[] = { [MASTER_CAMNOC_SF] = &qnm_camera_nrt, [MASTER_VIDEO_P0] = &qxm_venus0, [MASTER_VIDEO_PROC] = &qxm_venus_cpu, @@ -1370,7 +1370,7 @@ static const struct qcom_icc_desc sm6115_mmnrt_virt = { .ab_coeff = 142, }; -static struct qcom_icc_node *mmrt_virt_nodes[] = { +static struct qcom_icc_node * const mmrt_virt_nodes[] = { [MASTER_CAMNOC_HF] = &qnm_camera_rt, [MASTER_MDP_PORT0] = &qxm_mdp0, [SLAVE_SNOC_BIMC_RT] = &slv_snoc_bimc_rt, -- cgit v1.2.3 From e6e1bf1359df11382ab07a9468d82f3c1ed8e17e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Feb 2024 11:50:55 +0100 Subject: interconnect: qcom: sa8775p: constify pointer to qcom_icc_bcm Pointers to struct qcom_icc_bcm are const. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Andrew Halaney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240208105056.128448-6-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sa8775p.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sa8775p.c b/drivers/interconnect/qcom/sa8775p.c index fe1b11041e6a..a729775c2aa4 100644 --- a/drivers/interconnect/qcom/sa8775p.c +++ b/drivers/interconnect/qcom/sa8775p.c @@ -2092,7 +2092,7 @@ static struct qcom_icc_bcm bcm_sn10 = { .nodes = { &xs_qdss_stm }, }; -static struct qcom_icc_bcm *aggre1_noc_bcms[] = { +static struct qcom_icc_bcm * const aggre1_noc_bcms[] = { &bcm_sn3, }; @@ -2115,7 +2115,7 @@ static const struct qcom_icc_desc sa8775p_aggre1_noc = { .num_bcms = ARRAY_SIZE(aggre1_noc_bcms), }; -static struct qcom_icc_bcm *aggre2_noc_bcms[] = { +static struct qcom_icc_bcm * const aggre2_noc_bcms[] = { &bcm_ce0, &bcm_sn4, }; @@ -2142,7 +2142,7 @@ static const struct qcom_icc_desc sa8775p_aggre2_noc = { .num_bcms = ARRAY_SIZE(aggre2_noc_bcms), }; -static struct qcom_icc_bcm *clk_virt_bcms[] = { +static struct qcom_icc_bcm * const clk_virt_bcms[] = { &bcm_qup0, &bcm_qup1, &bcm_qup2, @@ -2166,7 +2166,7 @@ static const struct qcom_icc_desc sa8775p_clk_virt = { .num_bcms = ARRAY_SIZE(clk_virt_bcms), }; -static struct qcom_icc_bcm *config_noc_bcms[] = { +static struct qcom_icc_bcm * const config_noc_bcms[] = { &bcm_cn0, &bcm_cn1, &bcm_cn2, @@ -2271,7 +2271,7 @@ static const struct qcom_icc_desc sa8775p_config_noc = { .num_bcms = ARRAY_SIZE(config_noc_bcms), }; -static struct qcom_icc_bcm *dc_noc_bcms[] = { +static struct qcom_icc_bcm * const dc_noc_bcms[] = { }; static struct qcom_icc_node * const dc_noc_nodes[] = { @@ -2287,7 +2287,7 @@ static const struct qcom_icc_desc sa8775p_dc_noc = { .num_bcms = ARRAY_SIZE(dc_noc_bcms), }; -static struct qcom_icc_bcm *gem_noc_bcms[] = { +static struct qcom_icc_bcm * const gem_noc_bcms[] = { &bcm_sh0, &bcm_sh2, }; @@ -2323,7 +2323,7 @@ static const struct qcom_icc_desc sa8775p_gem_noc = { .num_bcms = ARRAY_SIZE(gem_noc_bcms), }; -static struct qcom_icc_bcm *gpdsp_anoc_bcms[] = { +static struct qcom_icc_bcm * const gpdsp_anoc_bcms[] = { &bcm_gna0, &bcm_gnb0, }; @@ -2341,7 +2341,7 @@ static const struct qcom_icc_desc sa8775p_gpdsp_anoc = { .num_bcms = ARRAY_SIZE(gpdsp_anoc_bcms), }; -static struct qcom_icc_bcm *lpass_ag_noc_bcms[] = { +static struct qcom_icc_bcm * const lpass_ag_noc_bcms[] = { &bcm_sn9, }; @@ -2364,7 +2364,7 @@ static const struct qcom_icc_desc sa8775p_lpass_ag_noc = { .num_bcms = ARRAY_SIZE(lpass_ag_noc_bcms), }; -static struct qcom_icc_bcm *mc_virt_bcms[] = { +static struct qcom_icc_bcm * const mc_virt_bcms[] = { &bcm_acv, &bcm_mc0, }; @@ -2381,7 +2381,7 @@ static const struct qcom_icc_desc sa8775p_mc_virt = { .num_bcms = ARRAY_SIZE(mc_virt_bcms), }; -static struct qcom_icc_bcm *mmss_noc_bcms[] = { +static struct qcom_icc_bcm * const mmss_noc_bcms[] = { &bcm_mm0, &bcm_mm1, }; @@ -2413,7 +2413,7 @@ static const struct qcom_icc_desc sa8775p_mmss_noc = { .num_bcms = ARRAY_SIZE(mmss_noc_bcms), }; -static struct qcom_icc_bcm *nspa_noc_bcms[] = { +static struct qcom_icc_bcm * const nspa_noc_bcms[] = { &bcm_nsa0, &bcm_nsa1, }; @@ -2433,7 +2433,7 @@ static const struct qcom_icc_desc sa8775p_nspa_noc = { .num_bcms = ARRAY_SIZE(nspa_noc_bcms), }; -static struct qcom_icc_bcm *nspb_noc_bcms[] = { +static struct qcom_icc_bcm * const nspb_noc_bcms[] = { &bcm_nsb0, &bcm_nsb1, }; @@ -2453,7 +2453,7 @@ static const struct qcom_icc_desc sa8775p_nspb_noc = { .num_bcms = ARRAY_SIZE(nspb_noc_bcms), }; -static struct qcom_icc_bcm *pcie_anoc_bcms[] = { +static struct qcom_icc_bcm * const pcie_anoc_bcms[] = { &bcm_pci0, }; @@ -2470,7 +2470,7 @@ static const struct qcom_icc_desc sa8775p_pcie_anoc = { .num_bcms = ARRAY_SIZE(pcie_anoc_bcms), }; -static struct qcom_icc_bcm *system_noc_bcms[] = { +static struct qcom_icc_bcm * const system_noc_bcms[] = { &bcm_sn0, &bcm_sn1, &bcm_sn3, -- cgit v1.2.3 From a804adfb753ef3fa87e0e1336aa6987617e5945a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 8 Feb 2024 11:50:56 +0100 Subject: interconnect: qcom: x1e80100: constify pointer to qcom_icc_bcm Pointers to struct qcom_icc_bcm are const. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Andrew Halaney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20240208105056.128448-7-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/x1e80100.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/x1e80100.c b/drivers/interconnect/qcom/x1e80100.c index 5b2de9c3a1d6..27a438d0505d 100644 --- a/drivers/interconnect/qcom/x1e80100.c +++ b/drivers/interconnect/qcom/x1e80100.c @@ -1541,7 +1541,7 @@ static struct qcom_icc_bcm bcm_sn4 = { .nodes = { &qnm_usb_anoc }, }; -static struct qcom_icc_bcm *aggre1_noc_bcms[] = { +static struct qcom_icc_bcm * const aggre1_noc_bcms[] = { }; static struct qcom_icc_node * const aggre1_noc_nodes[] = { @@ -1729,7 +1729,7 @@ static const struct qcom_icc_desc x1e80100_gem_noc = { .num_bcms = ARRAY_SIZE(gem_noc_bcms), }; -static struct qcom_icc_bcm *lpass_ag_noc_bcms[] = { +static struct qcom_icc_bcm * const lpass_ag_noc_bcms[] = { }; static struct qcom_icc_node * const lpass_ag_noc_nodes[] = { @@ -1870,7 +1870,7 @@ static const struct qcom_icc_desc x1e80100_pcie_north_anoc = { .num_bcms = ARRAY_SIZE(pcie_north_anoc_bcms), }; -static struct qcom_icc_bcm *pcie_south_anoc_bcms[] = { +static struct qcom_icc_bcm * const pcie_south_anoc_bcms[] = { }; static struct qcom_icc_node * const pcie_south_anoc_nodes[] = { @@ -1889,7 +1889,7 @@ static const struct qcom_icc_desc x1e80100_pcie_south_anoc = { .num_bcms = ARRAY_SIZE(pcie_south_anoc_bcms), }; -static struct qcom_icc_bcm *system_noc_bcms[] = { +static struct qcom_icc_bcm * const system_noc_bcms[] = { &bcm_sn0, &bcm_sn2, &bcm_sn3, @@ -1927,7 +1927,7 @@ static const struct qcom_icc_desc x1e80100_usb_center_anoc = { .num_bcms = ARRAY_SIZE(usb_center_anoc_bcms), }; -static struct qcom_icc_bcm *usb_north_anoc_bcms[] = { +static struct qcom_icc_bcm * const usb_north_anoc_bcms[] = { }; static struct qcom_icc_node * const usb_north_anoc_nodes[] = { @@ -1943,7 +1943,7 @@ static const struct qcom_icc_desc x1e80100_usb_north_anoc = { .num_bcms = ARRAY_SIZE(usb_north_anoc_bcms), }; -static struct qcom_icc_bcm *usb_south_anoc_bcms[] = { +static struct qcom_icc_bcm * const usb_south_anoc_bcms[] = { }; static struct qcom_icc_node * const usb_south_anoc_nodes[] = { -- cgit v1.2.3 From 8a519235c3c37663e54e37a89d05a86c0a2c90c8 Mon Sep 17 00:00:00 2001 From: James Clark Date: Thu, 23 Nov 2023 12:04:56 +0000 Subject: coresight: Fix uninitialized struct warnings These warnings would be hit with the following W=1 build change so initialize all structs properly. Signed-off-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231123120459.287578-2-james.clark@arm.com --- drivers/hwtracing/coresight/coresight-cti-core.c | 2 +- drivers/hwtracing/coresight/coresight-etb10.c | 2 +- drivers/hwtracing/coresight/coresight-etm3x-core.c | 2 +- drivers/hwtracing/coresight/coresight-etm4x-core.c | 2 +- drivers/hwtracing/coresight/coresight-funnel.c | 4 ++-- drivers/hwtracing/coresight/coresight-replicator.c | 2 +- drivers/hwtracing/coresight/coresight-stm.c | 2 +- drivers/hwtracing/coresight/coresight-tmc-core.c | 2 +- drivers/hwtracing/coresight/coresight-tpda.c | 2 +- drivers/hwtracing/coresight/coresight-tpdm.c | 2 +- drivers/hwtracing/coresight/coresight-tpiu.c | 2 +- drivers/hwtracing/coresight/ultrasoc-smb.c | 2 +- 12 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-cti-core.c b/drivers/hwtracing/coresight/coresight-cti-core.c index 3999d0a2cb60..e805617020d0 100644 --- a/drivers/hwtracing/coresight/coresight-cti-core.c +++ b/drivers/hwtracing/coresight/coresight-cti-core.c @@ -974,7 +974,7 @@ static const struct amba_id cti_ids[] = { CS_AMBA_ID(0x000bb9aa), /* CTI - C-A73 */ CS_AMBA_UCI_ID(0x000bb9da, uci_id_cti), /* CTI - C-A35 */ CS_AMBA_UCI_ID(0x000bb9ed, uci_id_cti), /* Coresight CTI (SoC 600) */ - { 0, 0}, + { 0, 0, NULL }, }; MODULE_DEVICE_TABLE(amba, cti_ids); diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index fa80039e0821..05e21cffd33b 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -837,7 +837,7 @@ static const struct amba_id etb_ids[] = { .id = 0x000bb907, .mask = 0x000fffff, }, - { 0, 0}, + { 0, 0, NULL }, }; MODULE_DEVICE_TABLE(amba, etb_ids); diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index 116a91d90ac2..8da1622e0837 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -1003,7 +1003,7 @@ static const struct amba_id etm_ids[] = { CS_AMBA_ID_DATA(0x000bb95f, "PTM 1.1"), /* PTM 1.1 Qualcomm */ CS_AMBA_ID_DATA(0x000b006f, "PTM 1.1"), - { 0, 0}, + { 0, 0, NULL}, }; MODULE_DEVICE_TABLE(amba, etm_ids); diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index ce1995a2827f..c5ea808ea662 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -2390,7 +2390,7 @@ static const struct of_device_id etm4_sysreg_match[] = { #ifdef CONFIG_ACPI static const struct acpi_device_id etm4x_acpi_ids[] = { - {"ARMHC500", 0}, /* ARM CoreSight ETM4x */ + {"ARMHC500", 0, 0, 0}, /* ARM CoreSight ETM4x */ {} }; MODULE_DEVICE_TABLE(acpi, etm4x_acpi_ids); diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c index a5b1fc787766..ef1a0abfee4e 100644 --- a/drivers/hwtracing/coresight/coresight-funnel.c +++ b/drivers/hwtracing/coresight/coresight-funnel.c @@ -350,7 +350,7 @@ MODULE_DEVICE_TABLE(of, static_funnel_match); #ifdef CONFIG_ACPI static const struct acpi_device_id static_funnel_ids[] = { - {"ARMHC9FE", 0}, + {"ARMHC9FE", 0, 0, 0}, {}, }; @@ -391,7 +391,7 @@ static const struct amba_id dynamic_funnel_ids[] = { .id = 0x000bb9eb, .mask = 0x000fffff, }, - { 0, 0}, + { 0, 0, NULL }, }; MODULE_DEVICE_TABLE(amba, dynamic_funnel_ids); diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c index 91d93060dda5..73452d9dc13b 100644 --- a/drivers/hwtracing/coresight/coresight-replicator.c +++ b/drivers/hwtracing/coresight/coresight-replicator.c @@ -363,7 +363,7 @@ MODULE_DEVICE_TABLE(of, static_replicator_match); #ifdef CONFIG_ACPI static const struct acpi_device_id static_replicator_acpi_ids[] = { - {"ARMHC985", 0}, /* ARM CoreSight Static Replicator */ + {"ARMHC985", 0, 0, 0}, /* ARM CoreSight Static Replicator */ {} }; diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index a1c27c901ad1..891ee64efed8 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -950,7 +950,7 @@ static const struct dev_pm_ops stm_dev_pm_ops = { static const struct amba_id stm_ids[] = { CS_AMBA_ID_DATA(0x000bb962, "STM32"), CS_AMBA_ID_DATA(0x000bb963, "STM500"), - { 0, 0}, + { 0, 0, NULL }, }; MODULE_DEVICE_TABLE(amba, stm_ids); diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c index 7ec5365e2b64..39bae35d4ffd 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-core.c +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c @@ -594,7 +594,7 @@ static const struct amba_id tmc_ids[] = { CS_AMBA_ID(0x000bb9e9), /* Coresight SoC 600 TMC-ETF */ CS_AMBA_ID(0x000bb9ea), - { 0, 0}, + { 0, 0, NULL }, }; MODULE_DEVICE_TABLE(amba, tmc_ids); diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index 5f82737c37bb..4ac954f4bc13 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -300,7 +300,7 @@ static struct amba_id tpda_ids[] = { .id = 0x000f0f00, .mask = 0x000fff00, }, - { 0, 0}, + { 0, 0, NULL }, }; static struct amba_driver tpda_driver = { diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index 97654aa4b772..bd13a548375c 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -933,7 +933,7 @@ static struct amba_id tpdm_ids[] = { .id = 0x000f0e00, .mask = 0x000fff00, }, - { 0, 0}, + { 0, 0, NULL }, }; static struct amba_driver tpdm_driver = { diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c index 59eac93fd6bb..7e69048ac944 100644 --- a/drivers/hwtracing/coresight/coresight-tpiu.c +++ b/drivers/hwtracing/coresight/coresight-tpiu.c @@ -218,7 +218,7 @@ static const struct amba_id tpiu_ids[] = { .id = 0x000bb9e7, .mask = 0x000fffff, }, - { 0, 0}, + { 0, 0, NULL }, }; MODULE_DEVICE_TABLE(amba, tpiu_ids); diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index 10e886455b8b..f0b6806202d1 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -586,7 +586,7 @@ static void smb_remove(struct platform_device *pdev) #ifdef CONFIG_ACPI static const struct acpi_device_id ultrasoc_smb_acpi_match[] = { - {"HISI03A1", 0}, + {"HISI03A1", 0, 0, 0}, {} }; MODULE_DEVICE_TABLE(acpi, ultrasoc_smb_acpi_match); -- cgit v1.2.3 From 54daf07e63321d98473777527ce4853fa8eac33d Mon Sep 17 00:00:00 2001 From: James Clark Date: Thu, 23 Nov 2023 12:04:57 +0000 Subject: coresight: etm3x: Fix build warning The missing * in the comment block causes the following warning, so fix it: hwtracing/coresight/coresight-etm3x-core.c:118: warning: bad line: Signed-off-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231123120459.287578-3-james.clark@arm.com --- drivers/hwtracing/coresight/coresight-etm3x-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index 8da1622e0837..74ae26911b8a 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -115,7 +115,7 @@ static void etm_clr_pwrup(struct etm_drvdata *drvdata) * * Basically the same as @coresight_timeout except for the register access * method where we have to account for CP14 configurations. - + * * Return: 0 as soon as the bit has taken the desired state or -EAGAIN if * TIMEOUT_US has elapsed, which ever happens first. */ -- cgit v1.2.3 From a7195f3f93836f518e07da11d0b068e71149d17e Mon Sep 17 00:00:00 2001 From: James Clark Date: Thu, 23 Nov 2023 12:04:58 +0000 Subject: coresight: Fix undeclared variable warnings from sparse checker Including the header with the declarations fixes the following warning with a C=1 build: coresight-cfg-afdo.c:102:27: warning: symbol 'strobe_etm4x' was not declared. Should it be static? coresight-cfg-afdo.c:141:26: warning: symbol 'afdo_etm4x' was not declared. Should it be static? Signed-off-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231123120459.287578-4-james.clark@arm.com --- drivers/hwtracing/coresight/coresight-cfg-afdo.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-cfg-afdo.c b/drivers/hwtracing/coresight/coresight-cfg-afdo.c index 84b31184252b..e794f2e145fa 100644 --- a/drivers/hwtracing/coresight/coresight-cfg-afdo.c +++ b/drivers/hwtracing/coresight/coresight-cfg-afdo.c @@ -9,6 +9,7 @@ /* ETMv4 includes and features */ #if IS_ENABLED(CONFIG_CORESIGHT_SOURCE_ETM4X) #include "coresight-etm4x-cfg.h" +#include "coresight-cfg-preload.h" /* preload configurations and features */ -- cgit v1.2.3 From d999c7dd52790e294d78d06e6535e318275c1ea5 Mon Sep 17 00:00:00 2001 From: James Clark Date: Thu, 23 Nov 2023 12:04:59 +0000 Subject: coresight: Make current W=1 warnings default Similarly to drivers/gpu/drm/amd/amdgpu/Makefile and fs/btrfs/Makefile, copy the current set of W=1 warnings from Makefile.extrawarn to the coresight makefile to make them default. Unfortunately there is no easy way to do this without copying. In addition to the default set of warnings, add -Wno-sign-compare to disable that warning. That's because Makefile.extrawarn does some extra steps to disable some -Wextra warnings unless W=2 or W=3 are used. That's the only one that's needed for Coresight, so disable it. Signed-off-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231123120459.287578-5-james.clark@arm.com --- drivers/hwtracing/coresight/Makefile | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 995d3b2c76df..4ba478211b31 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -2,6 +2,26 @@ # # Makefile for CoreSight drivers. # + +# Current W=1 warnings +subdir-ccflags-y += -Wextra -Wunused -Wno-unused-parameter +subdir-ccflags-y += -Wmissing-declarations +subdir-ccflags-y += -Wmissing-format-attribute +subdir-ccflags-y += -Wmissing-prototypes +subdir-ccflags-y += -Wold-style-definition +subdir-ccflags-y += -Wmissing-include-dirs +subdir-ccflags-y += -Wno-sign-compare +condflags := \ + $(call cc-option, -Wrestrict) \ + $(call cc-option, -Wunused-but-set-variable) \ + $(call cc-option, -Wunused-const-variable) \ + $(call cc-option, -Wpacked-not-aligned) \ + $(call cc-option, -Wformat-overflow) \ + $(call cc-option, -Wformat-truncation) \ + $(call cc-option, -Wstringop-overflow) \ + $(call cc-option, -Wstringop-truncation) +subdir-ccflags-y += $(condflags) + obj-$(CONFIG_CORESIGHT) += coresight.o coresight-y := coresight-core.o coresight-etm-perf.o coresight-platform.o \ coresight-sysfs.o coresight-syscfg.o coresight-config.o \ -- cgit v1.2.3 From dd95255d44c05c9977f962bf0f2afe5e11f8ab3e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 5 Jan 2024 13:33:32 +0100 Subject: coresight: make coresight_bustype const Now that the driver core can properly handle constant struct bus_type, move the coresight_bustype variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Suzuki K Poulose Cc: Mike Leach Cc: James Clark Cc: Leo Yan Cc: Alexander Shishkin Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/2024010531-tinfoil-avert-4a57@gregkh --- drivers/hwtracing/coresight/coresight-core.c | 2 +- include/linux/coresight.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index d7f0e231feb9..5dde597403b3 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -1799,7 +1799,7 @@ done: } EXPORT_SYMBOL_GPL(coresight_alloc_device_name); -struct bus_type coresight_bustype = { +const struct bus_type coresight_bustype = { .name = "coresight", }; diff --git a/include/linux/coresight.h b/include/linux/coresight.h index a4cb7dd6ca23..e8b6e388218c 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -35,7 +35,7 @@ #define CORESIGHT_UNLOCK 0xc5acce55 -extern struct bus_type coresight_bustype; +extern const struct bus_type coresight_bustype; enum coresight_dev_type { CORESIGHT_DEV_TYPE_SINK, -- cgit v1.2.3 From f68bbe4dcfa303164922bc331d2e8d38ed2d4f23 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:32 +0000 Subject: coresight: Fix issue where a source device's helpers aren't disabled The linked commit reverts the change that accidentally used some sysfs enable/disable functions from Perf which broke the refcounting, but it also removes the fact that the sysfs disable function disabled the helpers. Add a new wrapper function that does both which is used by both Perf and sysfs, and label the sysfs disable function appropriately. The naming of all of the functions will be tidied up later to avoid this happening again. Fixes: 287e82cf69aa ("coresight: Fix crash when Perf and sysfs modes are used concurrently") Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-2-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-core.c | 30 ++++++++++++++++++------ drivers/hwtracing/coresight/coresight-etm-perf.c | 2 +- drivers/hwtracing/coresight/coresight-priv.h | 2 +- 3 files changed, 25 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 5dde597403b3..1dd3cd46fda4 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -441,8 +441,26 @@ static void coresight_disable_helpers(struct coresight_device *csdev) } } +/* + * Helper function to call source_ops(csdev)->disable and also disable the + * helpers. + * + * There is an imbalance between coresight_enable_path() and + * coresight_disable_path(). Enabling also enables the source's helpers as part + * of the path, but disabling always skips the first item in the path (which is + * the source), so sources and their helpers don't get disabled as part of that + * function and we need the extra step here. + */ +void coresight_disable_source(struct coresight_device *csdev, void *data) +{ + if (source_ops(csdev)->disable) + source_ops(csdev)->disable(csdev, data); + coresight_disable_helpers(csdev); +} +EXPORT_SYMBOL_GPL(coresight_disable_source); + /** - * coresight_disable_source - Drop the reference count by 1 and disable + * coresight_disable_source_sysfs - Drop the reference count by 1 and disable * the device if there are no users left. * * @csdev: The coresight device to disable @@ -451,17 +469,15 @@ static void coresight_disable_helpers(struct coresight_device *csdev) * * Returns true if the device has been disabled. */ -bool coresight_disable_source(struct coresight_device *csdev, void *data) +static bool coresight_disable_source_sysfs(struct coresight_device *csdev, + void *data) { if (atomic_dec_return(&csdev->refcnt) == 0) { - if (source_ops(csdev)->disable) - source_ops(csdev)->disable(csdev, data); - coresight_disable_helpers(csdev); + coresight_disable_source(csdev, data); csdev->enable = false; } return !csdev->enable; } -EXPORT_SYMBOL_GPL(coresight_disable_source); /* * coresight_disable_path_from : Disable components in the given path beyond @@ -1204,7 +1220,7 @@ void coresight_disable(struct coresight_device *csdev) if (ret) goto out; - if (!csdev->enable || !coresight_disable_source(csdev, NULL)) + if (!csdev->enable || !coresight_disable_source_sysfs(csdev, NULL)) goto out; switch (csdev->subtype.source_subtype) { diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index a52cfcce25d6..c0c60e6a1703 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -589,7 +589,7 @@ static void etm_event_stop(struct perf_event *event, int mode) return; /* stop tracer */ - source_ops(csdev)->disable(csdev, event); + coresight_disable_source(csdev, event); /* tell the core */ event->hw.state = PERF_HES_STOPPED; diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index 767076e07970..30c051055e54 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -233,6 +233,6 @@ void coresight_set_percpu_sink(int cpu, struct coresight_device *csdev); struct coresight_device *coresight_get_percpu_sink(int cpu); int coresight_enable_source(struct coresight_device *csdev, enum cs_mode mode, void *data); -bool coresight_disable_source(struct coresight_device *csdev, void *data); +void coresight_disable_source(struct coresight_device *csdev, void *data); #endif -- cgit v1.2.3 From a0fef3f05cf36338d471e8f35a9ced88a054d583 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:33 +0000 Subject: coresight: Make language around "activated" sinks consistent Activated has the specific meaning of a sink that's selected for use by the user via sysfs. But comments in some code that's shared by Perf use the same word, so in those cases change them to just say "selected" instead. With selected implying either via Perf or "activated" via sysfs. coresight_get_enabled_sink() doesn't actually get an enabled sink, it only gets an activated one, so change that too. And change the activated variable name to include "sysfs" so it can't be confused as a general status. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-3-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-core.c | 51 +++++++++++----------------- drivers/hwtracing/coresight/coresight-priv.h | 2 -- include/linux/coresight.h | 14 ++++---- 3 files changed, 27 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 1dd3cd46fda4..37e59052e877 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -500,7 +500,7 @@ static void coresight_disable_path_from(struct list_head *path, /* * ETF devices are tricky... They can be a link or a sink, * depending on how they are configured. If an ETF has been - * "activated" it will be configured as a sink, otherwise + * selected as a sink it will be configured as a sink, otherwise * go ahead with the link configuration. */ if (type == CORESIGHT_DEV_TYPE_LINKSINK) @@ -578,7 +578,7 @@ int coresight_enable_path(struct list_head *path, enum cs_mode mode, /* * ETF devices are tricky... They can be a link or a sink, * depending on how they are configured. If an ETF has been - * "activated" it will be configured as a sink, otherwise + * selected as a sink it will be configured as a sink, otherwise * go ahead with the link configuration. */ if (type == CORESIGHT_DEV_TYPE_LINKSINK) @@ -635,15 +635,21 @@ struct coresight_device *coresight_get_sink(struct list_head *path) return csdev; } +/** + * coresight_find_activated_sysfs_sink - returns the first sink activated via + * sysfs using connection based search starting from the source reference. + * + * @csdev: Coresight source device reference + */ static struct coresight_device * -coresight_find_enabled_sink(struct coresight_device *csdev) +coresight_find_activated_sysfs_sink(struct coresight_device *csdev) { int i; struct coresight_device *sink = NULL; if ((csdev->type == CORESIGHT_DEV_TYPE_SINK || csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) && - csdev->activated) + csdev->sysfs_sink_activated) return csdev; /* @@ -654,7 +660,7 @@ coresight_find_enabled_sink(struct coresight_device *csdev) child_dev = csdev->pdata->out_conns[i]->dest_dev; if (child_dev) - sink = coresight_find_enabled_sink(child_dev); + sink = coresight_find_activated_sysfs_sink(child_dev); if (sink) return sink; } @@ -662,21 +668,6 @@ coresight_find_enabled_sink(struct coresight_device *csdev) return NULL; } -/** - * coresight_get_enabled_sink - returns the first enabled sink using - * connection based search starting from the source reference - * - * @source: Coresight source device reference - */ -struct coresight_device * -coresight_get_enabled_sink(struct coresight_device *source) -{ - if (!source) - return NULL; - - return coresight_find_enabled_sink(source); -} - static int coresight_sink_by_id(struct device *dev, const void *data) { struct coresight_device *csdev = to_coresight_device(dev); @@ -810,11 +801,10 @@ static void coresight_drop_device(struct coresight_device *csdev) * @sink: The final sink we want in this path. * @path: The list to add devices to. * - * The tree of Coresight device is traversed until an activated sink is - * found. From there the sink is added to the list along with all the - * devices that led to that point - the end result is a list from source - * to sink. In that list the source is the first device and the sink the - * last one. + * The tree of Coresight device is traversed until @sink is found. + * From there the sink is added to the list along with all the devices that led + * to that point - the end result is a list from source to sink. In that list + * the source is the first device and the sink the last one. */ static int _coresight_build_path(struct coresight_device *csdev, struct coresight_device *sink, @@ -824,7 +814,7 @@ static int _coresight_build_path(struct coresight_device *csdev, bool found = false; struct coresight_node *node; - /* An activated sink has been found. Enqueue the element */ + /* The sink has been found. Enqueue the element */ if (csdev == sink) goto out; @@ -1145,7 +1135,7 @@ int coresight_enable(struct coresight_device *csdev) goto out; } - sink = coresight_get_enabled_sink(csdev); + sink = coresight_find_activated_sysfs_sink(csdev); if (!sink) { ret = -EINVAL; goto out; @@ -1259,7 +1249,7 @@ static ssize_t enable_sink_show(struct device *dev, { struct coresight_device *csdev = to_coresight_device(dev); - return scnprintf(buf, PAGE_SIZE, "%u\n", csdev->activated); + return scnprintf(buf, PAGE_SIZE, "%u\n", csdev->sysfs_sink_activated); } static ssize_t enable_sink_store(struct device *dev, @@ -1274,10 +1264,7 @@ static ssize_t enable_sink_store(struct device *dev, if (ret) return ret; - if (val) - csdev->activated = true; - else - csdev->activated = false; + csdev->sysfs_sink_activated = !!val; return size; diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index 30c051055e54..ced5be05a527 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -130,8 +130,6 @@ void coresight_disable_path(struct list_head *path); int coresight_enable_path(struct list_head *path, enum cs_mode mode, void *sink_data); struct coresight_device *coresight_get_sink(struct list_head *path); -struct coresight_device * -coresight_get_enabled_sink(struct coresight_device *source); struct coresight_device *coresight_get_sink_by_id(u32 id); struct coresight_device * coresight_find_default_sink(struct coresight_device *csdev); diff --git a/include/linux/coresight.h b/include/linux/coresight.h index e8b6e388218c..516ab45ff3c2 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -229,10 +229,12 @@ struct coresight_sysfs_link { * @refcnt: keep track of what is in use. * @orphan: true if the component has connections that haven't been linked. * @enable: 'true' if component is currently part of an active path. - * @activated: 'true' only if a _sink_ has been activated. A sink can be - * activated but not yet enabled. Enabling for a _sink_ - * happens when a source has been selected and a path is enabled - * from source to that sink. + * @sysfs_sink_activated: 'true' when a sink has been selected for use via sysfs + * by writing a 1 to the 'enable_sink' file. A sink can be + * activated but not yet enabled. Enabling for a _sink_ happens + * when a source has been selected and a path is enabled from + * source to that sink. A sink can also become enabled but not + * activated if it's used via Perf. * @ea: Device attribute for sink representation under PMU directory. * @def_sink: cached reference to default sink found for this device. * @nr_links: number of sysfs links created to other components from this @@ -252,9 +254,9 @@ struct coresight_device { struct device dev; atomic_t refcnt; bool orphan; - bool enable; /* true only if configured as part of a path */ + bool enable; /* sink specific fields */ - bool activated; /* true only if a sink is part of a path */ + bool sysfs_sink_activated; struct dev_ext_attribute *ea; struct coresight_device *def_sink; /* sysfs links between components */ -- cgit v1.2.3 From a11ebe138b8ddb119b1b75c143429f64d605a54e Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:34 +0000 Subject: coresight: Remove ops callback checks The check for the existence of callbacks before using them implies that this happens and is supported. There are no devices without enable/disable callbacks, and it wouldn't be possible to add a new working device without adding them either, so just remove them. Furthermore, there are more callbacks than just enable and disable that are already used unguarded in other places. The comment about new session compatibility doesn't seem to match up to the line of code that it's on so remove it. I think it's alluding to the fact that sinks will check if they were already enabled via sysfs or Perf and fail the enable. But there are more detailed comments at those places, and this one isn't very useful. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-4-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-core.c | 51 +++++++--------------------- 1 file changed, 12 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 37e59052e877..5e93b52df105 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -279,16 +279,8 @@ EXPORT_SYMBOL_GPL(coresight_add_helper); static int coresight_enable_sink(struct coresight_device *csdev, enum cs_mode mode, void *data) { - int ret; - - /* - * We need to make sure the "new" session is compatible with the - * existing "mode" of operation. - */ - if (!sink_ops(csdev)->enable) - return -EINVAL; + int ret = sink_ops(csdev)->enable(csdev, mode, data); - ret = sink_ops(csdev)->enable(csdev, mode, data); if (ret) return ret; @@ -299,12 +291,7 @@ static int coresight_enable_sink(struct coresight_device *csdev, static void coresight_disable_sink(struct coresight_device *csdev) { - int ret; - - if (!sink_ops(csdev)->disable) - return; - - ret = sink_ops(csdev)->disable(csdev); + int ret = sink_ops(csdev)->disable(csdev); if (ret) return; csdev->enable = false; @@ -330,11 +317,9 @@ static int coresight_enable_link(struct coresight_device *csdev, if (link_subtype == CORESIGHT_DEV_SUBTYPE_LINK_SPLIT && IS_ERR(outconn)) return PTR_ERR(outconn); - if (link_ops(csdev)->enable) { - ret = link_ops(csdev)->enable(csdev, inconn, outconn); - if (!ret) - csdev->enable = true; - } + ret = link_ops(csdev)->enable(csdev, inconn, outconn); + if (!ret) + csdev->enable = true; return ret; } @@ -354,9 +339,7 @@ static void coresight_disable_link(struct coresight_device *csdev, outconn = coresight_find_out_connection(csdev, child); link_subtype = csdev->subtype.link_subtype; - if (link_ops(csdev)->disable) { - link_ops(csdev)->disable(csdev, inconn, outconn); - } + link_ops(csdev)->disable(csdev, inconn, outconn); if (link_subtype == CORESIGHT_DEV_SUBTYPE_LINK_MERG) { for (i = 0; i < csdev->pdata->nr_inconns; i++) @@ -382,11 +365,9 @@ int coresight_enable_source(struct coresight_device *csdev, enum cs_mode mode, int ret; if (!csdev->enable) { - if (source_ops(csdev)->enable) { - ret = source_ops(csdev)->enable(csdev, data, mode); - if (ret) - return ret; - } + ret = source_ops(csdev)->enable(csdev, data, mode); + if (ret) + return ret; csdev->enable = true; } @@ -404,11 +385,8 @@ static bool coresight_is_helper(struct coresight_device *csdev) static int coresight_enable_helper(struct coresight_device *csdev, enum cs_mode mode, void *data) { - int ret; + int ret = helper_ops(csdev)->enable(csdev, mode, data); - if (!helper_ops(csdev)->enable) - return 0; - ret = helper_ops(csdev)->enable(csdev, mode, data); if (ret) return ret; @@ -418,12 +396,8 @@ static int coresight_enable_helper(struct coresight_device *csdev, static void coresight_disable_helper(struct coresight_device *csdev) { - int ret; - - if (!helper_ops(csdev)->disable) - return; + int ret = helper_ops(csdev)->disable(csdev, NULL); - ret = helper_ops(csdev)->disable(csdev, NULL); if (ret) return; csdev->enable = false; @@ -453,8 +427,7 @@ static void coresight_disable_helpers(struct coresight_device *csdev) */ void coresight_disable_source(struct coresight_device *csdev, void *data) { - if (source_ops(csdev)->disable) - source_ops(csdev)->disable(csdev, data); + source_ops(csdev)->disable(csdev, data); coresight_disable_helpers(csdev); } EXPORT_SYMBOL_GPL(coresight_disable_source); -- cgit v1.2.3 From 9cae77cf23e317f31de036ced7ad2c261317dc76 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:35 +0000 Subject: coresight: Move mode to struct coresight_device Most devices use mode, so move the mode definition out of the individual devices and up to the Coresight device. This will allow the core code to also know the mode which will be useful in a later commit. This also fixes the inconsistency of the documentation of the mode field on the individual device types. For example ETB10 had "this ETB is being used". Two devices didn't require an atomic mode type, so these usages have been converted to atomic_get() and atomic_set() only to make it compile, but the documentation of the field in struct coresight_device explains this type of usage. In the future, manipulation of the mode could be completely moved out of the individual devices and into the core code because it's almost all duplicate code, and this change is a step towards that. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-5-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-etb10.c | 18 +++++++-------- drivers/hwtracing/coresight/coresight-etm.h | 2 -- drivers/hwtracing/coresight/coresight-etm3x-core.c | 13 +++++------ .../hwtracing/coresight/coresight-etm3x-sysfs.c | 4 ++-- drivers/hwtracing/coresight/coresight-etm4x-core.c | 16 ++++++------- drivers/hwtracing/coresight/coresight-etm4x.h | 1 - drivers/hwtracing/coresight/coresight-stm.c | 20 ++++++++--------- drivers/hwtracing/coresight/coresight-tmc-core.c | 2 +- drivers/hwtracing/coresight/coresight-tmc-etf.c | 26 +++++++++++----------- drivers/hwtracing/coresight/coresight-tmc-etr.c | 20 ++++++++--------- drivers/hwtracing/coresight/coresight-tmc.h | 2 -- drivers/hwtracing/coresight/ultrasoc-smb.c | 13 ++++++----- drivers/hwtracing/coresight/ultrasoc-smb.h | 2 -- include/linux/coresight.h | 6 +++++ 14 files changed, 69 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index 05e21cffd33b..145fb815ec1c 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -76,7 +76,6 @@ DEFINE_CORESIGHT_DEVLIST(etb_devs, "etb"); * @pid: Process ID of the process being monitored by the session * that is using this component. * @buf: area of memory where ETB buffer content gets sent. - * @mode: this ETB is being used. * @buffer_depth: size of @buf. * @trigger_cntr: amount of words to store after a trigger. */ @@ -89,7 +88,6 @@ struct etb_drvdata { local_t reading; pid_t pid; u8 *buf; - u32 mode; u32 buffer_depth; u32 trigger_cntr; }; @@ -150,17 +148,17 @@ static int etb_enable_sysfs(struct coresight_device *csdev) spin_lock_irqsave(&drvdata->spinlock, flags); /* Don't messup with perf sessions. */ - if (drvdata->mode == CS_MODE_PERF) { + if (local_read(&csdev->mode) == CS_MODE_PERF) { ret = -EBUSY; goto out; } - if (drvdata->mode == CS_MODE_DISABLED) { + if (local_read(&csdev->mode) == CS_MODE_DISABLED) { ret = etb_enable_hw(drvdata); if (ret) goto out; - drvdata->mode = CS_MODE_SYSFS; + local_set(&csdev->mode, CS_MODE_SYSFS); } atomic_inc(&csdev->refcnt); @@ -181,7 +179,7 @@ static int etb_enable_perf(struct coresight_device *csdev, void *data) spin_lock_irqsave(&drvdata->spinlock, flags); /* No need to continue if the component is already in used by sysFS. */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { ret = -EBUSY; goto out; } @@ -216,7 +214,7 @@ static int etb_enable_perf(struct coresight_device *csdev, void *data) if (!ret) { /* Associate with monitored process. */ drvdata->pid = pid; - drvdata->mode = CS_MODE_PERF; + local_set(&drvdata->csdev->mode, CS_MODE_PERF); atomic_inc(&csdev->refcnt); } @@ -362,11 +360,11 @@ static int etb_disable(struct coresight_device *csdev) } /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED); + WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); etb_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; - drvdata->mode = CS_MODE_DISABLED; + local_set(&csdev->mode, CS_MODE_DISABLED); spin_unlock_irqrestore(&drvdata->spinlock, flags); dev_dbg(&csdev->dev, "ETB disabled\n"); @@ -589,7 +587,7 @@ static void etb_dump(struct etb_drvdata *drvdata) unsigned long flags; spin_lock_irqsave(&drvdata->spinlock, flags); - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { __etb_disable_hw(drvdata); etb_dump_hw(drvdata); __etb_enable_hw(drvdata); diff --git a/drivers/hwtracing/coresight/coresight-etm.h b/drivers/hwtracing/coresight/coresight-etm.h index 9a0d08b092ae..e02c3ea972c9 100644 --- a/drivers/hwtracing/coresight/coresight-etm.h +++ b/drivers/hwtracing/coresight/coresight-etm.h @@ -215,7 +215,6 @@ struct etm_config { * @port_size: port size as reported by ETMCR bit 4-6 and 21. * @arch: ETM/PTM version number. * @use_cpu14: true if management registers need to be accessed via CP14. - * @mode: this tracer's mode, i.e sysFS, Perf or disabled. * @sticky_enable: true if ETM base configuration has been done. * @boot_enable:true if we should start tracing at boot time. * @os_unlock: true if access to management registers is allowed. @@ -238,7 +237,6 @@ struct etm_drvdata { int port_size; u8 arch; bool use_cp14; - local_t mode; bool sticky_enable; bool boot_enable; bool os_unlock; diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index 74ae26911b8a..333d0a32c95c 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -559,7 +559,7 @@ static int etm_enable(struct coresight_device *csdev, struct perf_event *event, u32 val; struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - val = local_cmpxchg(&drvdata->mode, CS_MODE_DISABLED, mode); + val = local_cmpxchg(&drvdata->csdev->mode, CS_MODE_DISABLED, mode); /* Someone is already using the tracer */ if (val) @@ -578,7 +578,7 @@ static int etm_enable(struct coresight_device *csdev, struct perf_event *event, /* The tracer didn't start */ if (ret) - local_set(&drvdata->mode, CS_MODE_DISABLED); + local_set(&drvdata->csdev->mode, CS_MODE_DISABLED); return ret; } @@ -672,14 +672,13 @@ static void etm_disable(struct coresight_device *csdev, struct perf_event *event) { enum cs_mode mode; - struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); /* * For as long as the tracer isn't disabled another entity can't * change its status. As such we can read the status here without * fearing it will change under us. */ - mode = local_read(&drvdata->mode); + mode = local_read(&csdev->mode); switch (mode) { case CS_MODE_DISABLED: @@ -696,7 +695,7 @@ static void etm_disable(struct coresight_device *csdev, } if (mode) - local_set(&drvdata->mode, CS_MODE_DISABLED); + local_set(&csdev->mode, CS_MODE_DISABLED); } static const struct coresight_ops_source etm_source_ops = { @@ -730,7 +729,7 @@ static int etm_starting_cpu(unsigned int cpu) etmdrvdata[cpu]->os_unlock = true; } - if (local_read(&etmdrvdata[cpu]->mode)) + if (local_read(&etmdrvdata[cpu]->csdev->mode)) etm_enable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; @@ -742,7 +741,7 @@ static int etm_dying_cpu(unsigned int cpu) return 0; spin_lock(&etmdrvdata[cpu]->spinlock); - if (local_read(&etmdrvdata[cpu]->mode)) + if (local_read(&etmdrvdata[cpu]->csdev->mode)) etm_disable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c index 2f271b7fb048..6c8429c980b1 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c @@ -722,7 +722,7 @@ static ssize_t cntr_val_show(struct device *dev, struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etm_config *config = &drvdata->config; - if (!local_read(&drvdata->mode)) { + if (!local_read(&drvdata->csdev->mode)) { spin_lock(&drvdata->spinlock); for (i = 0; i < drvdata->nr_cntr; i++) ret += sprintf(buf, "counter %d: %x\n", @@ -941,7 +941,7 @@ static ssize_t seq_curr_state_show(struct device *dev, struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etm_config *config = &drvdata->config; - if (!local_read(&drvdata->mode)) { + if (!local_read(&drvdata->csdev->mode)) { val = config->seq_curr_state; goto out; } diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index c5ea808ea662..7ceff627cd95 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -841,9 +841,8 @@ static int etm4_enable(struct coresight_device *csdev, struct perf_event *event, { int ret; u32 val; - struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - val = local_cmpxchg(&drvdata->mode, CS_MODE_DISABLED, mode); + val = local_cmpxchg(&csdev->mode, CS_MODE_DISABLED, mode); /* Someone is already using the tracer */ if (val) @@ -862,7 +861,7 @@ static int etm4_enable(struct coresight_device *csdev, struct perf_event *event, /* The tracer didn't start */ if (ret) - local_set(&drvdata->mode, CS_MODE_DISABLED); + local_set(&csdev->mode, CS_MODE_DISABLED); return ret; } @@ -1004,14 +1003,13 @@ static void etm4_disable(struct coresight_device *csdev, struct perf_event *event) { enum cs_mode mode; - struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); /* * For as long as the tracer isn't disabled another entity can't * change its status. As such we can read the status here without * fearing it will change under us. */ - mode = local_read(&drvdata->mode); + mode = local_read(&csdev->mode); switch (mode) { case CS_MODE_DISABLED: @@ -1025,7 +1023,7 @@ static void etm4_disable(struct coresight_device *csdev, } if (mode) - local_set(&drvdata->mode, CS_MODE_DISABLED); + local_set(&csdev->mode, CS_MODE_DISABLED); } static const struct coresight_ops_source etm4_source_ops = { @@ -1663,7 +1661,7 @@ static int etm4_starting_cpu(unsigned int cpu) if (!etmdrvdata[cpu]->os_unlock) etm4_os_unlock(etmdrvdata[cpu]); - if (local_read(&etmdrvdata[cpu]->mode)) + if (local_read(&etmdrvdata[cpu]->csdev->mode)) etm4_enable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; @@ -1675,7 +1673,7 @@ static int etm4_dying_cpu(unsigned int cpu) return 0; spin_lock(&etmdrvdata[cpu]->spinlock); - if (local_read(&etmdrvdata[cpu]->mode)) + if (local_read(&etmdrvdata[cpu]->csdev->mode)) etm4_disable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; @@ -1833,7 +1831,7 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata) * Save and restore the ETM Trace registers only if * the ETM is active. */ - if (local_read(&drvdata->mode) && drvdata->save_state) + if (local_read(&drvdata->csdev->mode) && drvdata->save_state) ret = __etm4_cpu_save(drvdata); return ret; } diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index da17b6c49b0f..9ea678bc2e8e 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -1016,7 +1016,6 @@ struct etmv4_drvdata { void __iomem *base; struct coresight_device *csdev; spinlock_t spinlock; - local_t mode; int cpu; u8 arch; u8 nr_pe; diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index 891ee64efed8..f7fc645ea7a4 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -119,7 +119,6 @@ DEFINE_CORESIGHT_DEVLIST(stm_devs, "stm"); * @spinlock: only one at a time pls. * @chs: the channels accociated to this STM. * @stm: structure associated to the generic STM interface. - * @mode: this tracer's mode (enum cs_mode), i.e sysFS, or disabled. * @traceid: value of the current ID for this component. * @write_bytes: Maximus bytes this STM can write at a time. * @stmsper: settings for register STMSPER. @@ -136,7 +135,6 @@ struct stm_drvdata { spinlock_t spinlock; struct channel_space chs; struct stm_data stm; - local_t mode; u8 traceid; u32 write_bytes; u32 stmsper; @@ -201,7 +199,7 @@ static int stm_enable(struct coresight_device *csdev, struct perf_event *event, if (mode != CS_MODE_SYSFS) return -EINVAL; - val = local_cmpxchg(&drvdata->mode, CS_MODE_DISABLED, mode); + val = local_cmpxchg(&csdev->mode, CS_MODE_DISABLED, mode); /* Someone is already using the tracer */ if (val) @@ -266,7 +264,7 @@ static void stm_disable(struct coresight_device *csdev, * change its status. As such we can read the status here without * fearing it will change under us. */ - if (local_read(&drvdata->mode) == CS_MODE_SYSFS) { + if (local_read(&csdev->mode) == CS_MODE_SYSFS) { spin_lock(&drvdata->spinlock); stm_disable_hw(drvdata); spin_unlock(&drvdata->spinlock); @@ -276,7 +274,7 @@ static void stm_disable(struct coresight_device *csdev, pm_runtime_put(csdev->dev.parent); - local_set(&drvdata->mode, CS_MODE_DISABLED); + local_set(&csdev->mode, CS_MODE_DISABLED); dev_dbg(&csdev->dev, "STM tracing disabled\n"); } } @@ -373,7 +371,7 @@ static long stm_generic_set_options(struct stm_data *stm_data, { struct stm_drvdata *drvdata = container_of(stm_data, struct stm_drvdata, stm); - if (!(drvdata && local_read(&drvdata->mode))) + if (!(drvdata && local_read(&drvdata->csdev->mode))) return -EINVAL; if (channel >= drvdata->numsp) @@ -408,7 +406,7 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data, struct stm_drvdata, stm); unsigned int stm_flags; - if (!(drvdata && local_read(&drvdata->mode))) + if (!(drvdata && local_read(&drvdata->csdev->mode))) return -EACCES; if (channel >= drvdata->numsp) @@ -515,7 +513,7 @@ static ssize_t port_select_show(struct device *dev, struct stm_drvdata *drvdata = dev_get_drvdata(dev->parent); unsigned long val; - if (!local_read(&drvdata->mode)) { + if (!local_read(&drvdata->csdev->mode)) { val = drvdata->stmspscr; } else { spin_lock(&drvdata->spinlock); @@ -541,7 +539,7 @@ static ssize_t port_select_store(struct device *dev, spin_lock(&drvdata->spinlock); drvdata->stmspscr = val; - if (local_read(&drvdata->mode)) { + if (local_read(&drvdata->csdev->mode)) { CS_UNLOCK(drvdata->base); /* Process as per ARM's TRM recommendation */ stmsper = readl_relaxed(drvdata->base + STMSPER); @@ -562,7 +560,7 @@ static ssize_t port_enable_show(struct device *dev, struct stm_drvdata *drvdata = dev_get_drvdata(dev->parent); unsigned long val; - if (!local_read(&drvdata->mode)) { + if (!local_read(&drvdata->csdev->mode)) { val = drvdata->stmsper; } else { spin_lock(&drvdata->spinlock); @@ -588,7 +586,7 @@ static ssize_t port_enable_store(struct device *dev, spin_lock(&drvdata->spinlock); drvdata->stmsper = val; - if (local_read(&drvdata->mode)) { + if (local_read(&drvdata->csdev->mode)) { CS_UNLOCK(drvdata->base); writel_relaxed(drvdata->stmsper, drvdata->base + STMSPER); CS_LOCK(drvdata->base); diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c index 39bae35d4ffd..e8b2bbed047f 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-core.c +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c @@ -558,7 +558,7 @@ static void tmc_shutdown(struct amba_device *adev) spin_lock_irqsave(&drvdata->spinlock, flags); - if (drvdata->mode == CS_MODE_DISABLED) + if (local_read(&drvdata->csdev->mode) == CS_MODE_DISABLED) goto out; if (drvdata->config_type == TMC_CONFIG_TYPE_ETR) diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index 7406b65e2cdd..2a7e516052a2 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -89,7 +89,7 @@ static void __tmc_etb_disable_hw(struct tmc_drvdata *drvdata) * When operating in sysFS mode the content of the buffer needs to be * read before the TMC is disabled. */ - if (drvdata->mode == CS_MODE_SYSFS) + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) tmc_etb_dump_hw(drvdata); tmc_disable_hw(drvdata); @@ -205,7 +205,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev) * sink is already enabled no memory is needed and the HW need not be * touched. */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&csdev->mode) == CS_MODE_SYSFS) { atomic_inc(&csdev->refcnt); goto out; } @@ -228,7 +228,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev) ret = tmc_etb_enable_hw(drvdata); if (!ret) { - drvdata->mode = CS_MODE_SYSFS; + local_set(&csdev->mode, CS_MODE_SYSFS); atomic_inc(&csdev->refcnt); } else { /* Free up the buffer if we failed to enable */ @@ -262,7 +262,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) * No need to continue if the ETB/ETF is already operated * from sysFS. */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&csdev->mode) == CS_MODE_SYSFS) { ret = -EBUSY; break; } @@ -292,7 +292,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) if (!ret) { /* Associate with monitored process. */ drvdata->pid = pid; - drvdata->mode = CS_MODE_PERF; + local_set(&csdev->mode, CS_MODE_PERF); atomic_inc(&csdev->refcnt); } } while (0); @@ -344,11 +344,11 @@ static int tmc_disable_etf_sink(struct coresight_device *csdev) } /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED); + WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); tmc_etb_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; - drvdata->mode = CS_MODE_DISABLED; + local_set(&csdev->mode, CS_MODE_DISABLED); spin_unlock_irqrestore(&drvdata->spinlock, flags); @@ -374,7 +374,7 @@ static int tmc_enable_etf_link(struct coresight_device *csdev, if (atomic_read(&csdev->refcnt) == 0) { ret = tmc_etf_enable_hw(drvdata); if (!ret) { - drvdata->mode = CS_MODE_SYSFS; + local_set(&csdev->mode, CS_MODE_SYSFS); first_enable = true; } } @@ -403,7 +403,7 @@ static void tmc_disable_etf_link(struct coresight_device *csdev, if (atomic_dec_return(&csdev->refcnt) == 0) { tmc_etf_disable_hw(drvdata); - drvdata->mode = CS_MODE_DISABLED; + local_set(&csdev->mode, CS_MODE_DISABLED); last_disable = true; } spin_unlock_irqrestore(&drvdata->spinlock, flags); @@ -483,7 +483,7 @@ static unsigned long tmc_update_etf_buffer(struct coresight_device *csdev, return 0; /* This shouldn't happen */ - if (WARN_ON_ONCE(drvdata->mode != CS_MODE_PERF)) + if (WARN_ON_ONCE(local_read(&csdev->mode) != CS_MODE_PERF)) return 0; spin_lock_irqsave(&drvdata->spinlock, flags); @@ -629,7 +629,7 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) } /* Don't interfere if operated from Perf */ - if (drvdata->mode == CS_MODE_PERF) { + if (local_read(&drvdata->csdev->mode) == CS_MODE_PERF) { ret = -EINVAL; goto out; } @@ -641,7 +641,7 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) } /* Disable the TMC if need be */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { /* There is no point in reading a TMC in HW FIFO mode */ mode = readl_relaxed(drvdata->base + TMC_MODE); if (mode != TMC_MODE_CIRCULAR_BUFFER) { @@ -673,7 +673,7 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata) spin_lock_irqsave(&drvdata->spinlock, flags); /* Re-enable the TMC if need be */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { /* There is no point in reading a TMC in HW FIFO mode */ mode = readl_relaxed(drvdata->base + TMC_MODE); if (mode != TMC_MODE_CIRCULAR_BUFFER) { diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index af02ba5d5f15..3dc989d4fcab 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1143,7 +1143,7 @@ static void __tmc_etr_disable_hw(struct tmc_drvdata *drvdata) * When operating in sysFS mode the content of the buffer needs to be * read before the TMC is disabled. */ - if (drvdata->mode == CS_MODE_SYSFS) + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) tmc_etr_sync_sysfs_buf(drvdata); tmc_disable_hw(drvdata); @@ -1189,7 +1189,7 @@ static struct etr_buf *tmc_etr_get_sysfs_buffer(struct coresight_device *csdev) spin_lock_irqsave(&drvdata->spinlock, flags); } - if (drvdata->reading || drvdata->mode == CS_MODE_PERF) { + if (drvdata->reading || local_read(&csdev->mode) == CS_MODE_PERF) { ret = -EBUSY; goto out; } @@ -1230,14 +1230,14 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev) * sink is already enabled no memory is needed and the HW need not be * touched, even if the buffer size has changed. */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&csdev->mode) == CS_MODE_SYSFS) { atomic_inc(&csdev->refcnt); goto out; } ret = tmc_etr_enable_hw(drvdata, sysfs_buf); if (!ret) { - drvdata->mode = CS_MODE_SYSFS; + local_set(&csdev->mode, CS_MODE_SYSFS); atomic_inc(&csdev->refcnt); } @@ -1652,7 +1652,7 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data) spin_lock_irqsave(&drvdata->spinlock, flags); /* Don't use this sink if it is already claimed by sysFS */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&csdev->mode) == CS_MODE_SYSFS) { rc = -EBUSY; goto unlock_out; } @@ -1684,7 +1684,7 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data) if (!rc) { /* Associate with monitored process. */ drvdata->pid = pid; - drvdata->mode = CS_MODE_PERF; + local_set(&csdev->mode, CS_MODE_PERF); drvdata->perf_buf = etr_perf->etr_buf; atomic_inc(&csdev->refcnt); } @@ -1725,11 +1725,11 @@ static int tmc_disable_etr_sink(struct coresight_device *csdev) } /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED); + WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); tmc_etr_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; - drvdata->mode = CS_MODE_DISABLED; + local_set(&csdev->mode, CS_MODE_DISABLED); /* Reset perf specific data */ drvdata->perf_buf = NULL; @@ -1777,7 +1777,7 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata) } /* Disable the TMC if we are trying to read from a running session. */ - if (drvdata->mode == CS_MODE_SYSFS) + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) __tmc_etr_disable_hw(drvdata); drvdata->reading = true; @@ -1799,7 +1799,7 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata) spin_lock_irqsave(&drvdata->spinlock, flags); /* RE-enable the TMC if need be */ - if (drvdata->mode == CS_MODE_SYSFS) { + if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { /* * The trace run will continue with the same allocated trace * buffer. Since the tracer is still enabled drvdata::buf can't diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h index 8dcb426ac3e7..cef979c897e6 100644 --- a/drivers/hwtracing/coresight/coresight-tmc.h +++ b/drivers/hwtracing/coresight/coresight-tmc.h @@ -178,7 +178,6 @@ struct etr_buf { * @size: trace buffer size for this TMC (common for all modes). * @max_burst_size: The maximum burst size that can be initiated by * TMC-ETR on AXI bus. - * @mode: how this TMC is being used. * @config_type: TMC variant, must be of type @tmc_config_type. * @memwidth: width of the memory interface databus, in bytes. * @trigger_cntr: amount of words to store after a trigger. @@ -203,7 +202,6 @@ struct tmc_drvdata { u32 len; u32 size; u32 max_burst_size; - u32 mode; enum tmc_config_type config_type; enum tmc_mem_intf_width memwidth; u32 trigger_cntr; diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index f0b6806202d1..bef633960173 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -207,11 +207,11 @@ static void smb_enable_sysfs(struct coresight_device *csdev) { struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent); - if (drvdata->mode != CS_MODE_DISABLED) + if (local_read(&csdev->mode) != CS_MODE_DISABLED) return; smb_enable_hw(drvdata); - drvdata->mode = CS_MODE_SYSFS; + local_set(&csdev->mode, CS_MODE_SYSFS); } static int smb_enable_perf(struct coresight_device *csdev, void *data) @@ -234,7 +234,7 @@ static int smb_enable_perf(struct coresight_device *csdev, void *data) if (drvdata->pid == -1) { smb_enable_hw(drvdata); drvdata->pid = pid; - drvdata->mode = CS_MODE_PERF; + local_set(&csdev->mode, CS_MODE_PERF); } return 0; @@ -253,7 +253,8 @@ static int smb_enable(struct coresight_device *csdev, enum cs_mode mode, return -EBUSY; /* Do nothing, the SMB is already enabled as other mode */ - if (drvdata->mode != CS_MODE_DISABLED && drvdata->mode != mode) + if (local_read(&csdev->mode) != CS_MODE_DISABLED && + local_read(&csdev->mode) != mode) return -EBUSY; switch (mode) { @@ -289,13 +290,13 @@ static int smb_disable(struct coresight_device *csdev) return -EBUSY; /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(drvdata->mode == CS_MODE_DISABLED); + WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); smb_disable_hw(drvdata); /* Dissociate from the target process. */ drvdata->pid = -1; - drvdata->mode = CS_MODE_DISABLED; + local_set(&csdev->mode, CS_MODE_DISABLED); dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n"); return 0; diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.h b/drivers/hwtracing/coresight/ultrasoc-smb.h index 82a44c14a882..a91d39cfccb8 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.h +++ b/drivers/hwtracing/coresight/ultrasoc-smb.h @@ -109,7 +109,6 @@ struct smb_data_buffer { * @reading: Synchronise user space access to SMB buffer. * @pid: Process ID of the process being monitored by the * session that is using this component. - * @mode: How this SMB is being used, perf mode or sysfs mode. */ struct smb_drv_data { void __iomem *base; @@ -119,7 +118,6 @@ struct smb_drv_data { spinlock_t spinlock; bool reading; pid_t pid; - enum cs_mode mode; }; #endif diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 516ab45ff3c2..01f67862ea2f 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -226,6 +226,11 @@ struct coresight_sysfs_link { * by @coresight_ops. * @access: Device i/o access abstraction for this device. * @dev: The device entity associated to this component. + * @mode: This tracer's mode, i.e sysFS, Perf or disabled. This is + * actually an 'enum cs_mode', but is stored in an atomic type. + * This is always accessed through local_read() and local_set(), + * but wherever it's done from within the Coresight device's lock, + * a non-atomic read would also work. * @refcnt: keep track of what is in use. * @orphan: true if the component has connections that haven't been linked. * @enable: 'true' if component is currently part of an active path. @@ -252,6 +257,7 @@ struct coresight_device { const struct coresight_ops *ops; struct csdev_access access; struct device dev; + local_t mode; atomic_t refcnt; bool orphan; bool enable; -- cgit v1.2.3 From d5e83f97eb5669bfdd894ec980083f65517df2fb Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:36 +0000 Subject: coresight: Remove the 'enable' field. 'enable', which probably should have been 'enabled', is only ever read in the core code in relation to controlling sources, and specifically only sources in sysfs mode. Confusingly it's not labelled as such and relying on it can be a source of bugs like the one fixed by commit 078dbba3f0c9 ("coresight: Fix crash when Perf and sysfs modes are used concurrently"). Most importantly, it can only be used when the coresight_mutex is held which is only done when enabling and disabling paths in sysfs mode, and not Perf mode. So to prevent its usage spreading and leaking out to other devices, remove it. It's use is equivalent to checking if the mode is currently sysfs, as due to the coresight_mutex lock, mode == CS_MODE_SYSFS can only become true or untrue when that lock is held, and when mode == CS_MODE_SYSFS the device is both enabled and in sysfs mode. The one place it was used outside of the core code is in TPDA, but that pattern is more appropriately represented using refcounts inside the device's own spinlock. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-6-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-core.c | 86 ++++++++++------------------ drivers/hwtracing/coresight/coresight-tpda.c | 12 +++- include/linux/coresight.h | 2 - 3 files changed, 38 insertions(+), 62 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index 5e93b52df105..b8d6520d47c9 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -279,29 +279,18 @@ EXPORT_SYMBOL_GPL(coresight_add_helper); static int coresight_enable_sink(struct coresight_device *csdev, enum cs_mode mode, void *data) { - int ret = sink_ops(csdev)->enable(csdev, mode, data); - - if (ret) - return ret; - - csdev->enable = true; - - return 0; + return sink_ops(csdev)->enable(csdev, mode, data); } static void coresight_disable_sink(struct coresight_device *csdev) { - int ret = sink_ops(csdev)->disable(csdev); - if (ret) - return; - csdev->enable = false; + sink_ops(csdev)->disable(csdev); } static int coresight_enable_link(struct coresight_device *csdev, struct coresight_device *parent, struct coresight_device *child) { - int ret = 0; int link_subtype; struct coresight_connection *inconn, *outconn; @@ -317,19 +306,13 @@ static int coresight_enable_link(struct coresight_device *csdev, if (link_subtype == CORESIGHT_DEV_SUBTYPE_LINK_SPLIT && IS_ERR(outconn)) return PTR_ERR(outconn); - ret = link_ops(csdev)->enable(csdev, inconn, outconn); - if (!ret) - csdev->enable = true; - - return ret; + return link_ops(csdev)->enable(csdev, inconn, outconn); } static void coresight_disable_link(struct coresight_device *csdev, struct coresight_device *parent, struct coresight_device *child) { - int i; - int link_subtype; struct coresight_connection *inconn, *outconn; if (!parent || !child) @@ -337,26 +320,8 @@ static void coresight_disable_link(struct coresight_device *csdev, inconn = coresight_find_out_connection(parent, csdev); outconn = coresight_find_out_connection(csdev, child); - link_subtype = csdev->subtype.link_subtype; link_ops(csdev)->disable(csdev, inconn, outconn); - - if (link_subtype == CORESIGHT_DEV_SUBTYPE_LINK_MERG) { - for (i = 0; i < csdev->pdata->nr_inconns; i++) - if (atomic_read(&csdev->pdata->in_conns[i]->dest_refcnt) != - 0) - return; - } else if (link_subtype == CORESIGHT_DEV_SUBTYPE_LINK_SPLIT) { - for (i = 0; i < csdev->pdata->nr_outconns; i++) - if (atomic_read(&csdev->pdata->out_conns[i]->src_refcnt) != - 0) - return; - } else { - if (atomic_read(&csdev->refcnt) != 0) - return; - } - - csdev->enable = false; } int coresight_enable_source(struct coresight_device *csdev, enum cs_mode mode, @@ -364,11 +329,16 @@ int coresight_enable_source(struct coresight_device *csdev, enum cs_mode mode, { int ret; - if (!csdev->enable) { + /* + * Comparison with CS_MODE_SYSFS works without taking any device + * specific spinlock because the truthyness of that comparison can only + * change with coresight_mutex held, which we already have here. + */ + lockdep_assert_held(&coresight_mutex); + if (local_read(&csdev->mode) != CS_MODE_SYSFS) { ret = source_ops(csdev)->enable(csdev, data, mode); if (ret) return ret; - csdev->enable = true; } atomic_inc(&csdev->refcnt); @@ -385,22 +355,12 @@ static bool coresight_is_helper(struct coresight_device *csdev) static int coresight_enable_helper(struct coresight_device *csdev, enum cs_mode mode, void *data) { - int ret = helper_ops(csdev)->enable(csdev, mode, data); - - if (ret) - return ret; - - csdev->enable = true; - return 0; + return helper_ops(csdev)->enable(csdev, mode, data); } static void coresight_disable_helper(struct coresight_device *csdev) { - int ret = helper_ops(csdev)->disable(csdev, NULL); - - if (ret) - return; - csdev->enable = false; + helper_ops(csdev)->disable(csdev, NULL); } static void coresight_disable_helpers(struct coresight_device *csdev) @@ -445,11 +405,15 @@ EXPORT_SYMBOL_GPL(coresight_disable_source); static bool coresight_disable_source_sysfs(struct coresight_device *csdev, void *data) { + lockdep_assert_held(&coresight_mutex); + if (local_read(&csdev->mode) != CS_MODE_SYSFS) + return false; + if (atomic_dec_return(&csdev->refcnt) == 0) { coresight_disable_source(csdev, data); - csdev->enable = false; + return true; } - return !csdev->enable; + return false; } /* @@ -1097,7 +1061,13 @@ int coresight_enable(struct coresight_device *csdev) if (ret) goto out; - if (csdev->enable) { + /* + * mode == SYSFS implies that it's already enabled. Don't look at the + * refcount to determine this because we don't claim the source until + * coresight_enable_source() so can still race with Perf mode which + * doesn't hold coresight_mutex. + */ + if (local_read(&csdev->mode) == CS_MODE_SYSFS) { /* * There could be multiple applications driving the software * source. So keep the refcount for each such user when the @@ -1183,7 +1153,7 @@ void coresight_disable(struct coresight_device *csdev) if (ret) goto out; - if (!csdev->enable || !coresight_disable_source_sysfs(csdev, NULL)) + if (!coresight_disable_source_sysfs(csdev, NULL)) goto out; switch (csdev->subtype.source_subtype) { @@ -1249,7 +1219,9 @@ static ssize_t enable_source_show(struct device *dev, { struct coresight_device *csdev = to_coresight_device(dev); - return scnprintf(buf, PAGE_SIZE, "%u\n", csdev->enable); + guard(mutex)(&coresight_mutex); + return scnprintf(buf, PAGE_SIZE, "%u\n", + local_read(&csdev->mode) == CS_MODE_SYSFS); } static ssize_t enable_source_store(struct device *dev, diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index 4ac954f4bc13..c813ec427b8d 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -148,7 +148,11 @@ static int __tpda_enable(struct tpda_drvdata *drvdata, int port) CS_UNLOCK(drvdata->base); - if (!drvdata->csdev->enable) + /* + * Only do pre-port enable for first port that calls enable when the + * device's main refcount is still 0 + */ + if (!atomic_read(&drvdata->csdev->refcnt)) tpda_enable_pre_port(drvdata); ret = tpda_enable_port(drvdata, port); @@ -169,6 +173,7 @@ static int tpda_enable(struct coresight_device *csdev, ret = __tpda_enable(drvdata, in->dest_port); if (!ret) { atomic_inc(&in->dest_refcnt); + atomic_inc(&csdev->refcnt); dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", in->dest_port); } } @@ -197,9 +202,10 @@ static void tpda_disable(struct coresight_device *csdev, struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); spin_lock(&drvdata->spinlock); - if (atomic_dec_return(&in->dest_refcnt) == 0) + if (atomic_dec_return(&in->dest_refcnt) == 0) { __tpda_disable(drvdata, in->dest_port); - + atomic_dec(&csdev->refcnt); + } spin_unlock(&drvdata->spinlock); dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", in->dest_port); diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 01f67862ea2f..d1fd7070099c 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -233,7 +233,6 @@ struct coresight_sysfs_link { * a non-atomic read would also work. * @refcnt: keep track of what is in use. * @orphan: true if the component has connections that haven't been linked. - * @enable: 'true' if component is currently part of an active path. * @sysfs_sink_activated: 'true' when a sink has been selected for use via sysfs * by writing a 1 to the 'enable_sink' file. A sink can be * activated but not yet enabled. Enabling for a _sink_ happens @@ -260,7 +259,6 @@ struct coresight_device { local_t mode; atomic_t refcnt; bool orphan; - bool enable; /* sink specific fields */ bool sysfs_sink_activated; struct dev_ext_attribute *ea; -- cgit v1.2.3 From 1f5149c7751c50aba1a871143ffa6cb36af3fb49 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:37 +0000 Subject: coresight: Move all sysfs code to sysfs file At the moment the core file contains both sysfs functionality and core functionality, while the Perf mode is in a separate file in coresight-etm-perf.c Many of the functions have ambiguous names like coresight_enable_source() which actually only work in relation to the sysfs mode. To avoid further confusion, move everything that isn't core functionality into the sysfs file and append _sysfs to the ambiguous functions. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-7-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-core.c | 394 +-------------------- drivers/hwtracing/coresight/coresight-etm3x-core.c | 4 +- drivers/hwtracing/coresight/coresight-etm4x-core.c | 4 +- drivers/hwtracing/coresight/coresight-priv.h | 5 +- drivers/hwtracing/coresight/coresight-stm.c | 4 +- drivers/hwtracing/coresight/coresight-sysfs.c | 390 ++++++++++++++++++++ include/linux/coresight.h | 8 +- 7 files changed, 407 insertions(+), 402 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c index b8d6520d47c9..b83613e34289 100644 --- a/drivers/hwtracing/coresight/coresight-core.c +++ b/drivers/hwtracing/coresight/coresight-core.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include #include @@ -25,15 +24,12 @@ #include "coresight-priv.h" #include "coresight-syscfg.h" -static DEFINE_MUTEX(coresight_mutex); -static DEFINE_PER_CPU(struct coresight_device *, csdev_sink); - /* - * Use IDR to map the hash of the source's device name - * to the pointer of path for the source. The idr is for - * the sources which aren't associated with CPU. + * Mutex used to lock all sysfs enable and disable actions and loading and + * unloading devices by the Coresight core. */ -static DEFINE_IDR(path_idr); +DEFINE_MUTEX(coresight_mutex); +static DEFINE_PER_CPU(struct coresight_device *, csdev_sink); /** * struct coresight_node - elements of a path, from source to sink @@ -45,12 +41,6 @@ struct coresight_node { struct list_head link; }; -/* - * When operating Coresight drivers from the sysFS interface, only a single - * path can exist from a tracer (associated to a CPU) to a sink. - */ -static DEFINE_PER_CPU(struct list_head *, tracer_path); - /* * When losing synchronisation a new barrier packet needs to be inserted at the * beginning of the data collected in a buffer. That way the decoder knows that @@ -61,34 +51,6 @@ EXPORT_SYMBOL_GPL(coresight_barrier_pkt); static const struct cti_assoc_op *cti_assoc_ops; -ssize_t coresight_simple_show_pair(struct device *_dev, - struct device_attribute *attr, char *buf) -{ - struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev); - struct cs_pair_attribute *cs_attr = container_of(attr, struct cs_pair_attribute, attr); - u64 val; - - pm_runtime_get_sync(_dev->parent); - val = csdev_access_relaxed_read_pair(&csdev->access, cs_attr->lo_off, cs_attr->hi_off); - pm_runtime_put_sync(_dev->parent); - return sysfs_emit(buf, "0x%llx\n", val); -} -EXPORT_SYMBOL_GPL(coresight_simple_show_pair); - -ssize_t coresight_simple_show32(struct device *_dev, - struct device_attribute *attr, char *buf) -{ - struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev); - struct cs_off_attribute *cs_attr = container_of(attr, struct cs_off_attribute, attr); - u64 val; - - pm_runtime_get_sync(_dev->parent); - val = csdev_access_relaxed_read32(&csdev->access, cs_attr->off); - pm_runtime_put_sync(_dev->parent); - return sysfs_emit(buf, "0x%llx\n", val); -} -EXPORT_SYMBOL_GPL(coresight_simple_show32); - void coresight_set_cti_ops(const struct cti_assoc_op *cti_op) { cti_assoc_ops = cti_op; @@ -324,29 +286,6 @@ static void coresight_disable_link(struct coresight_device *csdev, link_ops(csdev)->disable(csdev, inconn, outconn); } -int coresight_enable_source(struct coresight_device *csdev, enum cs_mode mode, - void *data) -{ - int ret; - - /* - * Comparison with CS_MODE_SYSFS works without taking any device - * specific spinlock because the truthyness of that comparison can only - * change with coresight_mutex held, which we already have here. - */ - lockdep_assert_held(&coresight_mutex); - if (local_read(&csdev->mode) != CS_MODE_SYSFS) { - ret = source_ops(csdev)->enable(csdev, data, mode); - if (ret) - return ret; - } - - atomic_inc(&csdev->refcnt); - - return 0; -} -EXPORT_SYMBOL_GPL(coresight_enable_source); - static bool coresight_is_helper(struct coresight_device *csdev) { return csdev->type == CORESIGHT_DEV_TYPE_HELPER; @@ -392,30 +331,6 @@ void coresight_disable_source(struct coresight_device *csdev, void *data) } EXPORT_SYMBOL_GPL(coresight_disable_source); -/** - * coresight_disable_source_sysfs - Drop the reference count by 1 and disable - * the device if there are no users left. - * - * @csdev: The coresight device to disable - * @data: Opaque data to pass on to the disable function of the source device. - * For example in perf mode this is a pointer to the struct perf_event. - * - * Returns true if the device has been disabled. - */ -static bool coresight_disable_source_sysfs(struct coresight_device *csdev, - void *data) -{ - lockdep_assert_held(&coresight_mutex); - if (local_read(&csdev->mode) != CS_MODE_SYSFS) - return false; - - if (atomic_dec_return(&csdev->refcnt) == 0) { - coresight_disable_source(csdev, data); - return true; - } - return false; -} - /* * coresight_disable_path_from : Disable components in the given path beyond * @nd in the list. If @nd is NULL, all the components, except the SOURCE are @@ -572,39 +487,6 @@ struct coresight_device *coresight_get_sink(struct list_head *path) return csdev; } -/** - * coresight_find_activated_sysfs_sink - returns the first sink activated via - * sysfs using connection based search starting from the source reference. - * - * @csdev: Coresight source device reference - */ -static struct coresight_device * -coresight_find_activated_sysfs_sink(struct coresight_device *csdev) -{ - int i; - struct coresight_device *sink = NULL; - - if ((csdev->type == CORESIGHT_DEV_TYPE_SINK || - csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) && - csdev->sysfs_sink_activated) - return csdev; - - /* - * Recursively explore each port found on this element. - */ - for (i = 0; i < csdev->pdata->nr_outconns; i++) { - struct coresight_device *child_dev; - - child_dev = csdev->pdata->out_conns[i]->dest_dev; - if (child_dev) - sink = coresight_find_activated_sysfs_sink(child_dev); - if (sink) - return sink; - } - - return NULL; -} - static int coresight_sink_by_id(struct device *dev, const void *data) { struct coresight_device *csdev = to_coresight_device(dev); @@ -1015,274 +897,6 @@ static void coresight_clear_default_sink(struct coresight_device *csdev) } } -/** coresight_validate_source - make sure a source has the right credentials - * @csdev: the device structure for a source. - * @function: the function this was called from. - * - * Assumes the coresight_mutex is held. - */ -static int coresight_validate_source(struct coresight_device *csdev, - const char *function) -{ - u32 type, subtype; - - type = csdev->type; - subtype = csdev->subtype.source_subtype; - - if (type != CORESIGHT_DEV_TYPE_SOURCE) { - dev_err(&csdev->dev, "wrong device type in %s\n", function); - return -EINVAL; - } - - if (subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_PROC && - subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE && - subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM && - subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS) { - dev_err(&csdev->dev, "wrong device subtype in %s\n", function); - return -EINVAL; - } - - return 0; -} - -int coresight_enable(struct coresight_device *csdev) -{ - int cpu, ret = 0; - struct coresight_device *sink; - struct list_head *path; - enum coresight_dev_subtype_source subtype; - u32 hash; - - subtype = csdev->subtype.source_subtype; - - mutex_lock(&coresight_mutex); - - ret = coresight_validate_source(csdev, __func__); - if (ret) - goto out; - - /* - * mode == SYSFS implies that it's already enabled. Don't look at the - * refcount to determine this because we don't claim the source until - * coresight_enable_source() so can still race with Perf mode which - * doesn't hold coresight_mutex. - */ - if (local_read(&csdev->mode) == CS_MODE_SYSFS) { - /* - * There could be multiple applications driving the software - * source. So keep the refcount for each such user when the - * source is already enabled. - */ - if (subtype == CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE) - atomic_inc(&csdev->refcnt); - goto out; - } - - sink = coresight_find_activated_sysfs_sink(csdev); - if (!sink) { - ret = -EINVAL; - goto out; - } - - path = coresight_build_path(csdev, sink); - if (IS_ERR(path)) { - pr_err("building path(s) failed\n"); - ret = PTR_ERR(path); - goto out; - } - - ret = coresight_enable_path(path, CS_MODE_SYSFS, NULL); - if (ret) - goto err_path; - - ret = coresight_enable_source(csdev, CS_MODE_SYSFS, NULL); - if (ret) - goto err_source; - - switch (subtype) { - case CORESIGHT_DEV_SUBTYPE_SOURCE_PROC: - /* - * When working from sysFS it is important to keep track - * of the paths that were created so that they can be - * undone in 'coresight_disable()'. Since there can only - * be a single session per tracer (when working from sysFS) - * a per-cpu variable will do just fine. - */ - cpu = source_ops(csdev)->cpu_id(csdev); - per_cpu(tracer_path, cpu) = path; - break; - case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE: - case CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM: - case CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS: - /* - * Use the hash of source's device name as ID - * and map the ID to the pointer of the path. - */ - hash = hashlen_hash(hashlen_string(NULL, dev_name(&csdev->dev))); - ret = idr_alloc_u32(&path_idr, path, &hash, hash, GFP_KERNEL); - if (ret) - goto err_source; - break; - default: - /* We can't be here */ - break; - } - -out: - mutex_unlock(&coresight_mutex); - return ret; - -err_source: - coresight_disable_path(path); - -err_path: - coresight_release_path(path); - goto out; -} -EXPORT_SYMBOL_GPL(coresight_enable); - -void coresight_disable(struct coresight_device *csdev) -{ - int cpu, ret; - struct list_head *path = NULL; - u32 hash; - - mutex_lock(&coresight_mutex); - - ret = coresight_validate_source(csdev, __func__); - if (ret) - goto out; - - if (!coresight_disable_source_sysfs(csdev, NULL)) - goto out; - - switch (csdev->subtype.source_subtype) { - case CORESIGHT_DEV_SUBTYPE_SOURCE_PROC: - cpu = source_ops(csdev)->cpu_id(csdev); - path = per_cpu(tracer_path, cpu); - per_cpu(tracer_path, cpu) = NULL; - break; - case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE: - case CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM: - case CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS: - hash = hashlen_hash(hashlen_string(NULL, dev_name(&csdev->dev))); - /* Find the path by the hash. */ - path = idr_find(&path_idr, hash); - if (path == NULL) { - pr_err("Path is not found for %s\n", dev_name(&csdev->dev)); - goto out; - } - idr_remove(&path_idr, hash); - break; - default: - /* We can't be here */ - break; - } - - coresight_disable_path(path); - coresight_release_path(path); - -out: - mutex_unlock(&coresight_mutex); -} -EXPORT_SYMBOL_GPL(coresight_disable); - -static ssize_t enable_sink_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct coresight_device *csdev = to_coresight_device(dev); - - return scnprintf(buf, PAGE_SIZE, "%u\n", csdev->sysfs_sink_activated); -} - -static ssize_t enable_sink_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - int ret; - unsigned long val; - struct coresight_device *csdev = to_coresight_device(dev); - - ret = kstrtoul(buf, 10, &val); - if (ret) - return ret; - - csdev->sysfs_sink_activated = !!val; - - return size; - -} -static DEVICE_ATTR_RW(enable_sink); - -static ssize_t enable_source_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct coresight_device *csdev = to_coresight_device(dev); - - guard(mutex)(&coresight_mutex); - return scnprintf(buf, PAGE_SIZE, "%u\n", - local_read(&csdev->mode) == CS_MODE_SYSFS); -} - -static ssize_t enable_source_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - int ret = 0; - unsigned long val; - struct coresight_device *csdev = to_coresight_device(dev); - - ret = kstrtoul(buf, 10, &val); - if (ret) - return ret; - - if (val) { - ret = coresight_enable(csdev); - if (ret) - return ret; - } else { - coresight_disable(csdev); - } - - return size; -} -static DEVICE_ATTR_RW(enable_source); - -static struct attribute *coresight_sink_attrs[] = { - &dev_attr_enable_sink.attr, - NULL, -}; -ATTRIBUTE_GROUPS(coresight_sink); - -static struct attribute *coresight_source_attrs[] = { - &dev_attr_enable_source.attr, - NULL, -}; -ATTRIBUTE_GROUPS(coresight_source); - -static struct device_type coresight_dev_type[] = { - { - .name = "sink", - .groups = coresight_sink_groups, - }, - { - .name = "link", - }, - { - .name = "linksink", - .groups = coresight_sink_groups, - }, - { - .name = "source", - .groups = coresight_source_groups, - }, - { - .name = "helper", - } -}; -/* Ensure the enum matches the names and groups */ -static_assert(ARRAY_SIZE(coresight_dev_type) == CORESIGHT_DEV_TYPE_MAX); - static void coresight_device_release(struct device *dev) { struct coresight_device *csdev = to_coresight_device(dev); diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index 333d0a32c95c..de53c3e8db29 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -714,7 +714,7 @@ static int etm_online_cpu(unsigned int cpu) return 0; if (etmdrvdata[cpu]->boot_enable && !etmdrvdata[cpu]->sticky_enable) - coresight_enable(etmdrvdata[cpu]->csdev); + coresight_enable_sysfs(etmdrvdata[cpu]->csdev); return 0; } @@ -924,7 +924,7 @@ static int etm_probe(struct amba_device *adev, const struct amba_id *id) dev_info(&drvdata->csdev->dev, "%s initialized\n", (char *)coresight_get_uci_data(id)); if (boot_enable) { - coresight_enable(drvdata->csdev); + coresight_enable_sysfs(drvdata->csdev); drvdata->boot_enable = true; } diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 7ceff627cd95..1c64b54459d7 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -1648,7 +1648,7 @@ static int etm4_online_cpu(unsigned int cpu) return etm4_probe_cpu(cpu); if (etmdrvdata[cpu]->boot_enable && !etmdrvdata[cpu]->sticky_enable) - coresight_enable(etmdrvdata[cpu]->csdev); + coresight_enable_sysfs(etmdrvdata[cpu]->csdev); return 0; } @@ -2096,7 +2096,7 @@ static int etm4_add_coresight_dev(struct etm4_init_arg *init_arg) drvdata->cpu, type_name, major, minor); if (boot_enable) { - coresight_enable(drvdata->csdev); + coresight_enable_sysfs(drvdata->csdev); drvdata->boot_enable = true; } diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index ced5be05a527..eb365236f9a9 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -12,6 +12,9 @@ #include #include +extern struct mutex coresight_mutex; +extern struct device_type coresight_dev_type[]; + /* * Coresight management registers (0xf00-0xfcc) * 0xfa0 - 0xfa4: Management registers in PFTv1.0 @@ -229,8 +232,6 @@ void coresight_add_helper(struct coresight_device *csdev, void coresight_set_percpu_sink(int cpu, struct coresight_device *csdev); struct coresight_device *coresight_get_percpu_sink(int cpu); -int coresight_enable_source(struct coresight_device *csdev, enum cs_mode mode, - void *data); void coresight_disable_source(struct coresight_device *csdev, void *data); #endif diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index f7fc645ea7a4..b2ccbe989ff8 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -332,7 +332,7 @@ static int stm_generic_link(struct stm_data *stm_data, if (!drvdata || !drvdata->csdev) return -EINVAL; - return coresight_enable(drvdata->csdev); + return coresight_enable_sysfs(drvdata->csdev); } static void stm_generic_unlink(struct stm_data *stm_data, @@ -343,7 +343,7 @@ static void stm_generic_unlink(struct stm_data *stm_data, if (!drvdata || !drvdata->csdev) return; - coresight_disable(drvdata->csdev); + coresight_disable_sysfs(drvdata->csdev); } static phys_addr_t diff --git a/drivers/hwtracing/coresight/coresight-sysfs.c b/drivers/hwtracing/coresight/coresight-sysfs.c index dd78e9fcfc4d..92cdf8139f23 100644 --- a/drivers/hwtracing/coresight/coresight-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-sysfs.c @@ -5,10 +5,400 @@ */ #include +#include #include #include "coresight-priv.h" +/* + * Use IDR to map the hash of the source's device name + * to the pointer of path for the source. The idr is for + * the sources which aren't associated with CPU. + */ +static DEFINE_IDR(path_idr); + +/* + * When operating Coresight drivers from the sysFS interface, only a single + * path can exist from a tracer (associated to a CPU) to a sink. + */ +static DEFINE_PER_CPU(struct list_head *, tracer_path); + +ssize_t coresight_simple_show_pair(struct device *_dev, + struct device_attribute *attr, char *buf) +{ + struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev); + struct cs_pair_attribute *cs_attr = container_of(attr, struct cs_pair_attribute, attr); + u64 val; + + pm_runtime_get_sync(_dev->parent); + val = csdev_access_relaxed_read_pair(&csdev->access, cs_attr->lo_off, cs_attr->hi_off); + pm_runtime_put_sync(_dev->parent); + return sysfs_emit(buf, "0x%llx\n", val); +} +EXPORT_SYMBOL_GPL(coresight_simple_show_pair); + +ssize_t coresight_simple_show32(struct device *_dev, + struct device_attribute *attr, char *buf) +{ + struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev); + struct cs_off_attribute *cs_attr = container_of(attr, struct cs_off_attribute, attr); + u64 val; + + pm_runtime_get_sync(_dev->parent); + val = csdev_access_relaxed_read32(&csdev->access, cs_attr->off); + pm_runtime_put_sync(_dev->parent); + return sysfs_emit(buf, "0x%llx\n", val); +} +EXPORT_SYMBOL_GPL(coresight_simple_show32); + +static int coresight_enable_source_sysfs(struct coresight_device *csdev, + enum cs_mode mode, void *data) +{ + int ret; + + /* + * Comparison with CS_MODE_SYSFS works without taking any device + * specific spinlock because the truthyness of that comparison can only + * change with coresight_mutex held, which we already have here. + */ + lockdep_assert_held(&coresight_mutex); + if (local_read(&csdev->mode) != CS_MODE_SYSFS) { + ret = source_ops(csdev)->enable(csdev, data, mode); + if (ret) + return ret; + } + + atomic_inc(&csdev->refcnt); + + return 0; +} + +/** + * coresight_disable_source_sysfs - Drop the reference count by 1 and disable + * the device if there are no users left. + * + * @csdev: The coresight device to disable + * @data: Opaque data to pass on to the disable function of the source device. + * For example in perf mode this is a pointer to the struct perf_event. + * + * Returns true if the device has been disabled. + */ +static bool coresight_disable_source_sysfs(struct coresight_device *csdev, + void *data) +{ + lockdep_assert_held(&coresight_mutex); + if (local_read(&csdev->mode) != CS_MODE_SYSFS) + return false; + + if (atomic_dec_return(&csdev->refcnt) == 0) { + coresight_disable_source(csdev, data); + return true; + } + return false; +} + +/** + * coresight_find_activated_sysfs_sink - returns the first sink activated via + * sysfs using connection based search starting from the source reference. + * + * @csdev: Coresight source device reference + */ +static struct coresight_device * +coresight_find_activated_sysfs_sink(struct coresight_device *csdev) +{ + int i; + struct coresight_device *sink = NULL; + + if ((csdev->type == CORESIGHT_DEV_TYPE_SINK || + csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) && + csdev->sysfs_sink_activated) + return csdev; + + /* + * Recursively explore each port found on this element. + */ + for (i = 0; i < csdev->pdata->nr_outconns; i++) { + struct coresight_device *child_dev; + + child_dev = csdev->pdata->out_conns[i]->dest_dev; + if (child_dev) + sink = coresight_find_activated_sysfs_sink(child_dev); + if (sink) + return sink; + } + + return NULL; +} + +/** coresight_validate_source - make sure a source has the right credentials to + * be used via sysfs. + * @csdev: the device structure for a source. + * @function: the function this was called from. + * + * Assumes the coresight_mutex is held. + */ +static int coresight_validate_source_sysfs(struct coresight_device *csdev, + const char *function) +{ + u32 type, subtype; + + type = csdev->type; + subtype = csdev->subtype.source_subtype; + + if (type != CORESIGHT_DEV_TYPE_SOURCE) { + dev_err(&csdev->dev, "wrong device type in %s\n", function); + return -EINVAL; + } + + if (subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_PROC && + subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE && + subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM && + subtype != CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS) { + dev_err(&csdev->dev, "wrong device subtype in %s\n", function); + return -EINVAL; + } + + return 0; +} + +int coresight_enable_sysfs(struct coresight_device *csdev) +{ + int cpu, ret = 0; + struct coresight_device *sink; + struct list_head *path; + enum coresight_dev_subtype_source subtype; + u32 hash; + + subtype = csdev->subtype.source_subtype; + + mutex_lock(&coresight_mutex); + + ret = coresight_validate_source_sysfs(csdev, __func__); + if (ret) + goto out; + + /* + * mode == SYSFS implies that it's already enabled. Don't look at the + * refcount to determine this because we don't claim the source until + * coresight_enable_source() so can still race with Perf mode which + * doesn't hold coresight_mutex. + */ + if (local_read(&csdev->mode) == CS_MODE_SYSFS) { + /* + * There could be multiple applications driving the software + * source. So keep the refcount for each such user when the + * source is already enabled. + */ + if (subtype == CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE) + atomic_inc(&csdev->refcnt); + goto out; + } + + sink = coresight_find_activated_sysfs_sink(csdev); + if (!sink) { + ret = -EINVAL; + goto out; + } + + path = coresight_build_path(csdev, sink); + if (IS_ERR(path)) { + pr_err("building path(s) failed\n"); + ret = PTR_ERR(path); + goto out; + } + + ret = coresight_enable_path(path, CS_MODE_SYSFS, NULL); + if (ret) + goto err_path; + + ret = coresight_enable_source_sysfs(csdev, CS_MODE_SYSFS, NULL); + if (ret) + goto err_source; + + switch (subtype) { + case CORESIGHT_DEV_SUBTYPE_SOURCE_PROC: + /* + * When working from sysFS it is important to keep track + * of the paths that were created so that they can be + * undone in 'coresight_disable()'. Since there can only + * be a single session per tracer (when working from sysFS) + * a per-cpu variable will do just fine. + */ + cpu = source_ops(csdev)->cpu_id(csdev); + per_cpu(tracer_path, cpu) = path; + break; + case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE: + case CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM: + case CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS: + /* + * Use the hash of source's device name as ID + * and map the ID to the pointer of the path. + */ + hash = hashlen_hash(hashlen_string(NULL, dev_name(&csdev->dev))); + ret = idr_alloc_u32(&path_idr, path, &hash, hash, GFP_KERNEL); + if (ret) + goto err_source; + break; + default: + /* We can't be here */ + break; + } + +out: + mutex_unlock(&coresight_mutex); + return ret; + +err_source: + coresight_disable_path(path); + +err_path: + coresight_release_path(path); + goto out; +} +EXPORT_SYMBOL_GPL(coresight_enable_sysfs); + +void coresight_disable_sysfs(struct coresight_device *csdev) +{ + int cpu, ret; + struct list_head *path = NULL; + u32 hash; + + mutex_lock(&coresight_mutex); + + ret = coresight_validate_source_sysfs(csdev, __func__); + if (ret) + goto out; + + if (!coresight_disable_source_sysfs(csdev, NULL)) + goto out; + + switch (csdev->subtype.source_subtype) { + case CORESIGHT_DEV_SUBTYPE_SOURCE_PROC: + cpu = source_ops(csdev)->cpu_id(csdev); + path = per_cpu(tracer_path, cpu); + per_cpu(tracer_path, cpu) = NULL; + break; + case CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE: + case CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM: + case CORESIGHT_DEV_SUBTYPE_SOURCE_OTHERS: + hash = hashlen_hash(hashlen_string(NULL, dev_name(&csdev->dev))); + /* Find the path by the hash. */ + path = idr_find(&path_idr, hash); + if (path == NULL) { + pr_err("Path is not found for %s\n", dev_name(&csdev->dev)); + goto out; + } + idr_remove(&path_idr, hash); + break; + default: + /* We can't be here */ + break; + } + + coresight_disable_path(path); + coresight_release_path(path); + +out: + mutex_unlock(&coresight_mutex); +} +EXPORT_SYMBOL_GPL(coresight_disable_sysfs); + +static ssize_t enable_sink_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct coresight_device *csdev = to_coresight_device(dev); + + return scnprintf(buf, PAGE_SIZE, "%u\n", csdev->sysfs_sink_activated); +} + +static ssize_t enable_sink_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int ret; + unsigned long val; + struct coresight_device *csdev = to_coresight_device(dev); + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + csdev->sysfs_sink_activated = !!val; + + return size; + +} +static DEVICE_ATTR_RW(enable_sink); + +static ssize_t enable_source_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct coresight_device *csdev = to_coresight_device(dev); + + guard(mutex)(&coresight_mutex); + return scnprintf(buf, PAGE_SIZE, "%u\n", + local_read(&csdev->mode) == CS_MODE_SYSFS); +} + +static ssize_t enable_source_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int ret = 0; + unsigned long val; + struct coresight_device *csdev = to_coresight_device(dev); + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + if (val) { + ret = coresight_enable_sysfs(csdev); + if (ret) + return ret; + } else { + coresight_disable_sysfs(csdev); + } + + return size; +} +static DEVICE_ATTR_RW(enable_source); + +static struct attribute *coresight_sink_attrs[] = { + &dev_attr_enable_sink.attr, + NULL, +}; +ATTRIBUTE_GROUPS(coresight_sink); + +static struct attribute *coresight_source_attrs[] = { + &dev_attr_enable_source.attr, + NULL, +}; +ATTRIBUTE_GROUPS(coresight_source); + +struct device_type coresight_dev_type[] = { + { + .name = "sink", + .groups = coresight_sink_groups, + }, + { + .name = "link", + }, + { + .name = "linksink", + .groups = coresight_sink_groups, + }, + { + .name = "source", + .groups = coresight_source_groups, + }, + { + .name = "helper", + } +}; +/* Ensure the enum matches the names and groups */ +static_assert(ARRAY_SIZE(coresight_dev_type) == CORESIGHT_DEV_TYPE_MAX); + /* * Connections group - links attribute. * Count of created links between coresight components in the group. diff --git a/include/linux/coresight.h b/include/linux/coresight.h index d1fd7070099c..365b28022c5b 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -578,8 +578,8 @@ static inline bool coresight_is_percpu_sink(struct coresight_device *csdev) extern struct coresight_device * coresight_register(struct coresight_desc *desc); extern void coresight_unregister(struct coresight_device *csdev); -extern int coresight_enable(struct coresight_device *csdev); -extern void coresight_disable(struct coresight_device *csdev); +extern int coresight_enable_sysfs(struct coresight_device *csdev); +extern void coresight_disable_sysfs(struct coresight_device *csdev); extern int coresight_timeout(struct csdev_access *csa, u32 offset, int position, int value); @@ -609,8 +609,8 @@ static inline struct coresight_device * coresight_register(struct coresight_desc *desc) { return NULL; } static inline void coresight_unregister(struct coresight_device *csdev) {} static inline int -coresight_enable(struct coresight_device *csdev) { return -ENOSYS; } -static inline void coresight_disable(struct coresight_device *csdev) {} +coresight_enable_sysfs(struct coresight_device *csdev) { return -ENOSYS; } +static inline void coresight_disable_sysfs(struct coresight_device *csdev) {} static inline int coresight_timeout(struct csdev_access *csa, u32 offset, int position, int value) -- cgit v1.2.3 From 4545b38ef004a586295750ea49a505b6396a7c90 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:38 +0000 Subject: coresight: Remove atomic type from refcnt Refcnt is only ever accessed from either inside the coresight_mutex, or the device's spinlock, making the atomic type and atomic_dec_return() calls confusing and unnecessary. The only point of synchronisation outside of these two types of locks is already done with a compare and swap on 'mode', which a comment has been added for. There was one instance of refcnt being used outside of a lock in TPIU, but that can easily be fixed by making it the same as all the other devices and adding a spinlock. Potentially in the future all the refcounting and locking can be moved up into the core code, and all the mostly duplicate code from the individual devices can be removed. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-8-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-etb10.c | 11 ++++++----- drivers/hwtracing/coresight/coresight-sysfs.c | 7 ++++--- drivers/hwtracing/coresight/coresight-tmc-etf.c | 20 +++++++++++--------- drivers/hwtracing/coresight/coresight-tmc-etr.c | 13 +++++++------ drivers/hwtracing/coresight/coresight-tpda.c | 7 ++++--- drivers/hwtracing/coresight/coresight-tpiu.c | 14 ++++++++++++-- drivers/hwtracing/coresight/ultrasoc-smb.c | 9 +++++---- include/linux/coresight.h | 13 ++++++++++--- 8 files changed, 59 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index 145fb815ec1c..306d2af47d63 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -161,7 +161,7 @@ static int etb_enable_sysfs(struct coresight_device *csdev) local_set(&csdev->mode, CS_MODE_SYSFS); } - atomic_inc(&csdev->refcnt); + csdev->refcnt++; out: spin_unlock_irqrestore(&drvdata->spinlock, flags); return ret; @@ -197,7 +197,7 @@ static int etb_enable_perf(struct coresight_device *csdev, void *data) * use for this session. */ if (drvdata->pid == pid) { - atomic_inc(&csdev->refcnt); + csdev->refcnt++; goto out; } @@ -215,7 +215,7 @@ static int etb_enable_perf(struct coresight_device *csdev, void *data) /* Associate with monitored process. */ drvdata->pid = pid; local_set(&drvdata->csdev->mode, CS_MODE_PERF); - atomic_inc(&csdev->refcnt); + csdev->refcnt++; } out: @@ -354,7 +354,8 @@ static int etb_disable(struct coresight_device *csdev) spin_lock_irqsave(&drvdata->spinlock, flags); - if (atomic_dec_return(&csdev->refcnt)) { + csdev->refcnt--; + if (csdev->refcnt) { spin_unlock_irqrestore(&drvdata->spinlock, flags); return -EBUSY; } @@ -445,7 +446,7 @@ static unsigned long etb_update_buffer(struct coresight_device *csdev, spin_lock_irqsave(&drvdata->spinlock, flags); /* Don't do anything if another tracer is using this sink */ - if (atomic_read(&csdev->refcnt) != 1) + if (csdev->refcnt != 1) goto out; __etb_disable_hw(drvdata); diff --git a/drivers/hwtracing/coresight/coresight-sysfs.c b/drivers/hwtracing/coresight/coresight-sysfs.c index 92cdf8139f23..5992f2c2200a 100644 --- a/drivers/hwtracing/coresight/coresight-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-sysfs.c @@ -68,7 +68,7 @@ static int coresight_enable_source_sysfs(struct coresight_device *csdev, return ret; } - atomic_inc(&csdev->refcnt); + csdev->refcnt++; return 0; } @@ -90,7 +90,8 @@ static bool coresight_disable_source_sysfs(struct coresight_device *csdev, if (local_read(&csdev->mode) != CS_MODE_SYSFS) return false; - if (atomic_dec_return(&csdev->refcnt) == 0) { + csdev->refcnt--; + if (csdev->refcnt == 0) { coresight_disable_source(csdev, data); return true; } @@ -190,7 +191,7 @@ int coresight_enable_sysfs(struct coresight_device *csdev) * source is already enabled. */ if (subtype == CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE) - atomic_inc(&csdev->refcnt); + csdev->refcnt++; goto out; } diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index 2a7e516052a2..f3281c958a57 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -206,7 +206,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev) * touched. */ if (local_read(&csdev->mode) == CS_MODE_SYSFS) { - atomic_inc(&csdev->refcnt); + csdev->refcnt++; goto out; } @@ -229,7 +229,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev) ret = tmc_etb_enable_hw(drvdata); if (!ret) { local_set(&csdev->mode, CS_MODE_SYSFS); - atomic_inc(&csdev->refcnt); + csdev->refcnt++; } else { /* Free up the buffer if we failed to enable */ used = false; @@ -284,7 +284,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) * use for this session. */ if (drvdata->pid == pid) { - atomic_inc(&csdev->refcnt); + csdev->refcnt++; break; } @@ -293,7 +293,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) /* Associate with monitored process. */ drvdata->pid = pid; local_set(&csdev->mode, CS_MODE_PERF); - atomic_inc(&csdev->refcnt); + csdev->refcnt++; } } while (0); spin_unlock_irqrestore(&drvdata->spinlock, flags); @@ -338,7 +338,8 @@ static int tmc_disable_etf_sink(struct coresight_device *csdev) return -EBUSY; } - if (atomic_dec_return(&csdev->refcnt)) { + csdev->refcnt--; + if (csdev->refcnt) { spin_unlock_irqrestore(&drvdata->spinlock, flags); return -EBUSY; } @@ -371,7 +372,7 @@ static int tmc_enable_etf_link(struct coresight_device *csdev, return -EBUSY; } - if (atomic_read(&csdev->refcnt) == 0) { + if (csdev->refcnt == 0) { ret = tmc_etf_enable_hw(drvdata); if (!ret) { local_set(&csdev->mode, CS_MODE_SYSFS); @@ -379,7 +380,7 @@ static int tmc_enable_etf_link(struct coresight_device *csdev, } } if (!ret) - atomic_inc(&csdev->refcnt); + csdev->refcnt++; spin_unlock_irqrestore(&drvdata->spinlock, flags); if (first_enable) @@ -401,7 +402,8 @@ static void tmc_disable_etf_link(struct coresight_device *csdev, return; } - if (atomic_dec_return(&csdev->refcnt) == 0) { + csdev->refcnt--; + if (csdev->refcnt == 0) { tmc_etf_disable_hw(drvdata); local_set(&csdev->mode, CS_MODE_DISABLED); last_disable = true; @@ -489,7 +491,7 @@ static unsigned long tmc_update_etf_buffer(struct coresight_device *csdev, spin_lock_irqsave(&drvdata->spinlock, flags); /* Don't do anything if another tracer is using this sink */ - if (atomic_read(&csdev->refcnt) != 1) + if (csdev->refcnt != 1) goto out; CS_UNLOCK(drvdata->base); diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 3dc989d4fcab..88a0fc375b4d 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1231,14 +1231,14 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev) * touched, even if the buffer size has changed. */ if (local_read(&csdev->mode) == CS_MODE_SYSFS) { - atomic_inc(&csdev->refcnt); + csdev->refcnt++; goto out; } ret = tmc_etr_enable_hw(drvdata, sysfs_buf); if (!ret) { local_set(&csdev->mode, CS_MODE_SYSFS); - atomic_inc(&csdev->refcnt); + csdev->refcnt++; } out: @@ -1564,7 +1564,7 @@ tmc_update_etr_buffer(struct coresight_device *csdev, spin_lock_irqsave(&drvdata->spinlock, flags); /* Don't do anything if another tracer is using this sink */ - if (atomic_read(&csdev->refcnt) != 1) { + if (csdev->refcnt != 1) { spin_unlock_irqrestore(&drvdata->spinlock, flags); goto out; } @@ -1676,7 +1676,7 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data) * use for this session. */ if (drvdata->pid == pid) { - atomic_inc(&csdev->refcnt); + csdev->refcnt++; goto unlock_out; } @@ -1686,7 +1686,7 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data) drvdata->pid = pid; local_set(&csdev->mode, CS_MODE_PERF); drvdata->perf_buf = etr_perf->etr_buf; - atomic_inc(&csdev->refcnt); + csdev->refcnt++; } unlock_out: @@ -1719,7 +1719,8 @@ static int tmc_disable_etr_sink(struct coresight_device *csdev) return -EBUSY; } - if (atomic_dec_return(&csdev->refcnt)) { + csdev->refcnt--; + if (csdev->refcnt) { spin_unlock_irqrestore(&drvdata->spinlock, flags); return -EBUSY; } diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index c813ec427b8d..f8f6413cc711 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -152,7 +152,8 @@ static int __tpda_enable(struct tpda_drvdata *drvdata, int port) * Only do pre-port enable for first port that calls enable when the * device's main refcount is still 0 */ - if (!atomic_read(&drvdata->csdev->refcnt)) + lockdep_assert_held(&drvdata->spinlock); + if (!drvdata->csdev->refcnt) tpda_enable_pre_port(drvdata); ret = tpda_enable_port(drvdata, port); @@ -173,7 +174,7 @@ static int tpda_enable(struct coresight_device *csdev, ret = __tpda_enable(drvdata, in->dest_port); if (!ret) { atomic_inc(&in->dest_refcnt); - atomic_inc(&csdev->refcnt); + csdev->refcnt++; dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", in->dest_port); } } @@ -204,7 +205,7 @@ static void tpda_disable(struct coresight_device *csdev, spin_lock(&drvdata->spinlock); if (atomic_dec_return(&in->dest_refcnt) == 0) { __tpda_disable(drvdata, in->dest_port); - atomic_dec(&csdev->refcnt); + csdev->refcnt--; } spin_unlock(&drvdata->spinlock); diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c index 7e69048ac944..29024f880fda 100644 --- a/drivers/hwtracing/coresight/coresight-tpiu.c +++ b/drivers/hwtracing/coresight/coresight-tpiu.c @@ -58,6 +58,7 @@ struct tpiu_drvdata { void __iomem *base; struct clk *atclk; struct coresight_device *csdev; + spinlock_t spinlock; }; static void tpiu_enable_hw(struct csdev_access *csa) @@ -72,8 +73,11 @@ static void tpiu_enable_hw(struct csdev_access *csa) static int tpiu_enable(struct coresight_device *csdev, enum cs_mode mode, void *__unused) { + struct tpiu_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); + + guard(spinlock)(&drvdata->spinlock); tpiu_enable_hw(&csdev->access); - atomic_inc(&csdev->refcnt); + csdev->refcnt++; dev_dbg(&csdev->dev, "TPIU enabled\n"); return 0; } @@ -96,7 +100,11 @@ static void tpiu_disable_hw(struct csdev_access *csa) static int tpiu_disable(struct coresight_device *csdev) { - if (atomic_dec_return(&csdev->refcnt)) + struct tpiu_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); + + guard(spinlock)(&drvdata->spinlock); + csdev->refcnt--; + if (csdev->refcnt) return -EBUSY; tpiu_disable_hw(&csdev->access); @@ -132,6 +140,8 @@ static int tpiu_probe(struct amba_device *adev, const struct amba_id *id) if (!drvdata) return -ENOMEM; + spin_lock_init(&drvdata->spinlock); + drvdata->atclk = devm_clk_get(&adev->dev, "atclk"); /* optional */ if (!IS_ERR(drvdata->atclk)) { ret = clk_prepare_enable(drvdata->atclk); diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index bef633960173..a92c5b750f81 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -103,7 +103,7 @@ static int smb_open(struct inode *inode, struct file *file) if (drvdata->reading) return -EBUSY; - if (atomic_read(&drvdata->csdev->refcnt)) + if (drvdata->csdev->refcnt) return -EBUSY; smb_update_data_size(drvdata); @@ -271,7 +271,7 @@ static int smb_enable(struct coresight_device *csdev, enum cs_mode mode, if (ret) return ret; - atomic_inc(&csdev->refcnt); + csdev->refcnt++; dev_dbg(&csdev->dev, "Ultrasoc SMB enabled\n"); return ret; @@ -286,7 +286,8 @@ static int smb_disable(struct coresight_device *csdev) if (drvdata->reading) return -EBUSY; - if (atomic_dec_return(&csdev->refcnt)) + csdev->refcnt--; + if (csdev->refcnt) return -EBUSY; /* Complain if we (somehow) got out of sync */ @@ -381,7 +382,7 @@ static unsigned long smb_update_buffer(struct coresight_device *csdev, guard(spinlock)(&drvdata->spinlock); /* Don't do anything if another tracer is using this sink. */ - if (atomic_read(&csdev->refcnt) != 1) + if (csdev->refcnt != 1) return 0; smb_disable_hw(drvdata); diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 365b28022c5b..74bcec526aa9 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -230,8 +230,15 @@ struct coresight_sysfs_link { * actually an 'enum cs_mode', but is stored in an atomic type. * This is always accessed through local_read() and local_set(), * but wherever it's done from within the Coresight device's lock, - * a non-atomic read would also work. - * @refcnt: keep track of what is in use. + * a non-atomic read would also work. This is the main point of + * synchronisation between code happening inside the sysfs mode's + * coresight_mutex and outside when running in Perf mode. A compare + * and exchange swap is done to atomically claim one mode or the + * other. + * @refcnt: keep track of what is in use. Only access this outside of the + * device's spinlock when the coresight_mutex held and mode == + * CS_MODE_SYSFS. Otherwise it must be accessed from inside the + * spinlock. * @orphan: true if the component has connections that haven't been linked. * @sysfs_sink_activated: 'true' when a sink has been selected for use via sysfs * by writing a 1 to the 'enable_sink' file. A sink can be @@ -257,7 +264,7 @@ struct coresight_device { struct csdev_access access; struct device dev; local_t mode; - atomic_t refcnt; + int refcnt; bool orphan; /* sink specific fields */ bool sysfs_sink_activated; -- cgit v1.2.3 From 812265e26ed3ac76d3a131709d8755bafcf31b58 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:40 +0000 Subject: coresight: Add explicit member initializers to coresight_dev_type These could potentially become wrong silently if the enum is changed, so explicitly initialize them. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-10-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-sysfs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-sysfs.c b/drivers/hwtracing/coresight/coresight-sysfs.c index 5992f2c2200a..fa52297c73d2 100644 --- a/drivers/hwtracing/coresight/coresight-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-sysfs.c @@ -378,22 +378,22 @@ static struct attribute *coresight_source_attrs[] = { ATTRIBUTE_GROUPS(coresight_source); struct device_type coresight_dev_type[] = { - { + [CORESIGHT_DEV_TYPE_SINK] = { .name = "sink", .groups = coresight_sink_groups, }, - { + [CORESIGHT_DEV_TYPE_LINK] = { .name = "link", }, - { + [CORESIGHT_DEV_TYPE_LINKSINK] = { .name = "linksink", .groups = coresight_sink_groups, }, - { + [CORESIGHT_DEV_TYPE_SOURCE] = { .name = "source", .groups = coresight_source_groups, }, - { + [CORESIGHT_DEV_TYPE_HELPER] = { .name = "helper", } }; -- cgit v1.2.3 From d724f65218b994da234081df5dfe417c23802a65 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:41 +0000 Subject: coresight: Add helper for atomically taking the device Now that mode is in struct coresight_device, this pattern can be wrapped in a helper. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-11-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-etm3x-core.c | 8 +++----- drivers/hwtracing/coresight/coresight-etm4x-core.c | 8 +++----- drivers/hwtracing/coresight/coresight-stm.c | 8 +++----- include/linux/coresight.h | 11 +++++++++++ 4 files changed, 20 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index de53c3e8db29..c301f6a5f065 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -556,14 +556,12 @@ static int etm_enable(struct coresight_device *csdev, struct perf_event *event, enum cs_mode mode) { int ret; - u32 val; struct etm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); - val = local_cmpxchg(&drvdata->csdev->mode, CS_MODE_DISABLED, mode); - - /* Someone is already using the tracer */ - if (val) + if (!coresight_take_mode(csdev, mode)) { + /* Someone is already using the tracer */ return -EBUSY; + } switch (mode) { case CS_MODE_SYSFS: diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 1c64b54459d7..572ac4a5e4ff 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -840,13 +840,11 @@ static int etm4_enable(struct coresight_device *csdev, struct perf_event *event, enum cs_mode mode) { int ret; - u32 val; - val = local_cmpxchg(&csdev->mode, CS_MODE_DISABLED, mode); - - /* Someone is already using the tracer */ - if (val) + if (!coresight_take_mode(csdev, mode)) { + /* Someone is already using the tracer */ return -EBUSY; + } switch (mode) { case CS_MODE_SYSFS: diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index b2ccbe989ff8..ff578762f6bf 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -193,17 +193,15 @@ static void stm_enable_hw(struct stm_drvdata *drvdata) static int stm_enable(struct coresight_device *csdev, struct perf_event *event, enum cs_mode mode) { - u32 val; struct stm_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); if (mode != CS_MODE_SYSFS) return -EINVAL; - val = local_cmpxchg(&csdev->mode, CS_MODE_DISABLED, mode); - - /* Someone is already using the tracer */ - if (val) + if (!coresight_take_mode(csdev, mode)) { + /* Someone is already using the tracer */ return -EBUSY; + } pm_runtime_get_sync(csdev->dev.parent); diff --git a/include/linux/coresight.h b/include/linux/coresight.h index ecf4b8aecca8..414bcbbdaf62 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -580,6 +580,17 @@ static inline bool coresight_is_percpu_sink(struct coresight_device *csdev) (csdev->subtype.sink_subtype == CORESIGHT_DEV_SUBTYPE_SINK_PERCPU_SYSMEM); } +/* + * Atomically try to take the device and set a new mode. Returns true on + * success, false if the device is already taken by someone else. + */ +static inline bool coresight_take_mode(struct coresight_device *csdev, + enum cs_mode new_mode) +{ + return local_cmpxchg(&csdev->mode, CS_MODE_DISABLED, new_mode) == + CS_MODE_DISABLED; +} + extern struct coresight_device * coresight_register(struct coresight_desc *desc); extern void coresight_unregister(struct coresight_device *csdev); -- cgit v1.2.3 From c95c2733e5feb1f6848923f166849b2d1c7bf682 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:42 +0000 Subject: coresight: Add a helper for getting csdev->mode Now that mode is in struct coresight_device accesses can be wrapped. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-12-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-etb10.c | 10 +++++----- drivers/hwtracing/coresight/coresight-etm3x-core.c | 6 +++--- drivers/hwtracing/coresight/coresight-etm3x-sysfs.c | 4 ++-- drivers/hwtracing/coresight/coresight-etm4x-core.c | 8 ++++---- drivers/hwtracing/coresight/coresight-stm.c | 14 +++++++------- drivers/hwtracing/coresight/coresight-sysfs.c | 8 ++++---- drivers/hwtracing/coresight/coresight-tmc-core.c | 2 +- drivers/hwtracing/coresight/coresight-tmc-etf.c | 16 ++++++++-------- drivers/hwtracing/coresight/coresight-tmc-etr.c | 14 +++++++------- drivers/hwtracing/coresight/ultrasoc-smb.c | 8 ++++---- include/linux/coresight.h | 5 +++++ 11 files changed, 50 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index 306d2af47d63..e3a54f7038ad 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -148,12 +148,12 @@ static int etb_enable_sysfs(struct coresight_device *csdev) spin_lock_irqsave(&drvdata->spinlock, flags); /* Don't messup with perf sessions. */ - if (local_read(&csdev->mode) == CS_MODE_PERF) { + if (coresight_get_mode(csdev) == CS_MODE_PERF) { ret = -EBUSY; goto out; } - if (local_read(&csdev->mode) == CS_MODE_DISABLED) { + if (coresight_get_mode(csdev) == CS_MODE_DISABLED) { ret = etb_enable_hw(drvdata); if (ret) goto out; @@ -179,7 +179,7 @@ static int etb_enable_perf(struct coresight_device *csdev, void *data) spin_lock_irqsave(&drvdata->spinlock, flags); /* No need to continue if the component is already in used by sysFS. */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) { ret = -EBUSY; goto out; } @@ -361,7 +361,7 @@ static int etb_disable(struct coresight_device *csdev) } /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); + WARN_ON_ONCE(coresight_get_mode(csdev) == CS_MODE_DISABLED); etb_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; @@ -588,7 +588,7 @@ static void etb_dump(struct etb_drvdata *drvdata) unsigned long flags; spin_lock_irqsave(&drvdata->spinlock, flags); - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) { __etb_disable_hw(drvdata); etb_dump_hw(drvdata); __etb_enable_hw(drvdata); diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index c301f6a5f065..64ff53887ef5 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -676,7 +676,7 @@ static void etm_disable(struct coresight_device *csdev, * change its status. As such we can read the status here without * fearing it will change under us. */ - mode = local_read(&csdev->mode); + mode = coresight_get_mode(csdev); switch (mode) { case CS_MODE_DISABLED: @@ -727,7 +727,7 @@ static int etm_starting_cpu(unsigned int cpu) etmdrvdata[cpu]->os_unlock = true; } - if (local_read(&etmdrvdata[cpu]->csdev->mode)) + if (coresight_get_mode(etmdrvdata[cpu]->csdev)) etm_enable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; @@ -739,7 +739,7 @@ static int etm_dying_cpu(unsigned int cpu) return 0; spin_lock(&etmdrvdata[cpu]->spinlock); - if (local_read(&etmdrvdata[cpu]->csdev->mode)) + if (coresight_get_mode(etmdrvdata[cpu]->csdev)) etm_disable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c index 6c8429c980b1..68c644be9813 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c @@ -722,7 +722,7 @@ static ssize_t cntr_val_show(struct device *dev, struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etm_config *config = &drvdata->config; - if (!local_read(&drvdata->csdev->mode)) { + if (!coresight_get_mode(drvdata->csdev)) { spin_lock(&drvdata->spinlock); for (i = 0; i < drvdata->nr_cntr; i++) ret += sprintf(buf, "counter %d: %x\n", @@ -941,7 +941,7 @@ static ssize_t seq_curr_state_show(struct device *dev, struct etm_drvdata *drvdata = dev_get_drvdata(dev->parent); struct etm_config *config = &drvdata->config; - if (!local_read(&drvdata->csdev->mode)) { + if (!coresight_get_mode(drvdata->csdev)) { val = config->seq_curr_state; goto out; } diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index 572ac4a5e4ff..e65232e982a7 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -1007,7 +1007,7 @@ static void etm4_disable(struct coresight_device *csdev, * change its status. As such we can read the status here without * fearing it will change under us. */ - mode = local_read(&csdev->mode); + mode = coresight_get_mode(csdev); switch (mode) { case CS_MODE_DISABLED: @@ -1659,7 +1659,7 @@ static int etm4_starting_cpu(unsigned int cpu) if (!etmdrvdata[cpu]->os_unlock) etm4_os_unlock(etmdrvdata[cpu]); - if (local_read(&etmdrvdata[cpu]->csdev->mode)) + if (coresight_get_mode(etmdrvdata[cpu]->csdev)) etm4_enable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; @@ -1671,7 +1671,7 @@ static int etm4_dying_cpu(unsigned int cpu) return 0; spin_lock(&etmdrvdata[cpu]->spinlock); - if (local_read(&etmdrvdata[cpu]->csdev->mode)) + if (coresight_get_mode(etmdrvdata[cpu]->csdev)) etm4_disable_hw(etmdrvdata[cpu]); spin_unlock(&etmdrvdata[cpu]->spinlock); return 0; @@ -1829,7 +1829,7 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata) * Save and restore the ETM Trace registers only if * the ETM is active. */ - if (local_read(&drvdata->csdev->mode) && drvdata->save_state) + if (coresight_get_mode(drvdata->csdev) && drvdata->save_state) ret = __etm4_cpu_save(drvdata); return ret; } diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index ff578762f6bf..1d02d42bea83 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -262,7 +262,7 @@ static void stm_disable(struct coresight_device *csdev, * change its status. As such we can read the status here without * fearing it will change under us. */ - if (local_read(&csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(csdev) == CS_MODE_SYSFS) { spin_lock(&drvdata->spinlock); stm_disable_hw(drvdata); spin_unlock(&drvdata->spinlock); @@ -369,7 +369,7 @@ static long stm_generic_set_options(struct stm_data *stm_data, { struct stm_drvdata *drvdata = container_of(stm_data, struct stm_drvdata, stm); - if (!(drvdata && local_read(&drvdata->csdev->mode))) + if (!(drvdata && coresight_get_mode(drvdata->csdev))) return -EINVAL; if (channel >= drvdata->numsp) @@ -404,7 +404,7 @@ static ssize_t notrace stm_generic_packet(struct stm_data *stm_data, struct stm_drvdata, stm); unsigned int stm_flags; - if (!(drvdata && local_read(&drvdata->csdev->mode))) + if (!(drvdata && coresight_get_mode(drvdata->csdev))) return -EACCES; if (channel >= drvdata->numsp) @@ -511,7 +511,7 @@ static ssize_t port_select_show(struct device *dev, struct stm_drvdata *drvdata = dev_get_drvdata(dev->parent); unsigned long val; - if (!local_read(&drvdata->csdev->mode)) { + if (!coresight_get_mode(drvdata->csdev)) { val = drvdata->stmspscr; } else { spin_lock(&drvdata->spinlock); @@ -537,7 +537,7 @@ static ssize_t port_select_store(struct device *dev, spin_lock(&drvdata->spinlock); drvdata->stmspscr = val; - if (local_read(&drvdata->csdev->mode)) { + if (coresight_get_mode(drvdata->csdev)) { CS_UNLOCK(drvdata->base); /* Process as per ARM's TRM recommendation */ stmsper = readl_relaxed(drvdata->base + STMSPER); @@ -558,7 +558,7 @@ static ssize_t port_enable_show(struct device *dev, struct stm_drvdata *drvdata = dev_get_drvdata(dev->parent); unsigned long val; - if (!local_read(&drvdata->csdev->mode)) { + if (!coresight_get_mode(drvdata->csdev)) { val = drvdata->stmsper; } else { spin_lock(&drvdata->spinlock); @@ -584,7 +584,7 @@ static ssize_t port_enable_store(struct device *dev, spin_lock(&drvdata->spinlock); drvdata->stmsper = val; - if (local_read(&drvdata->csdev->mode)) { + if (coresight_get_mode(drvdata->csdev)) { CS_UNLOCK(drvdata->base); writel_relaxed(drvdata->stmsper, drvdata->base + STMSPER); CS_LOCK(drvdata->base); diff --git a/drivers/hwtracing/coresight/coresight-sysfs.c b/drivers/hwtracing/coresight/coresight-sysfs.c index fa52297c73d2..f9444e2cb1d9 100644 --- a/drivers/hwtracing/coresight/coresight-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-sysfs.c @@ -62,7 +62,7 @@ static int coresight_enable_source_sysfs(struct coresight_device *csdev, * change with coresight_mutex held, which we already have here. */ lockdep_assert_held(&coresight_mutex); - if (local_read(&csdev->mode) != CS_MODE_SYSFS) { + if (coresight_get_mode(csdev) != CS_MODE_SYSFS) { ret = source_ops(csdev)->enable(csdev, data, mode); if (ret) return ret; @@ -87,7 +87,7 @@ static bool coresight_disable_source_sysfs(struct coresight_device *csdev, void *data) { lockdep_assert_held(&coresight_mutex); - if (local_read(&csdev->mode) != CS_MODE_SYSFS) + if (coresight_get_mode(csdev) != CS_MODE_SYSFS) return false; csdev->refcnt--; @@ -184,7 +184,7 @@ int coresight_enable_sysfs(struct coresight_device *csdev) * coresight_enable_source() so can still race with Perf mode which * doesn't hold coresight_mutex. */ - if (local_read(&csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(csdev) == CS_MODE_SYSFS) { /* * There could be multiple applications driving the software * source. So keep the refcount for each such user when the @@ -338,7 +338,7 @@ static ssize_t enable_source_show(struct device *dev, guard(mutex)(&coresight_mutex); return scnprintf(buf, PAGE_SIZE, "%u\n", - local_read(&csdev->mode) == CS_MODE_SYSFS); + coresight_get_mode(csdev) == CS_MODE_SYSFS); } static ssize_t enable_source_store(struct device *dev, diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c index e8b2bbed047f..72005b0c633e 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-core.c +++ b/drivers/hwtracing/coresight/coresight-tmc-core.c @@ -558,7 +558,7 @@ static void tmc_shutdown(struct amba_device *adev) spin_lock_irqsave(&drvdata->spinlock, flags); - if (local_read(&drvdata->csdev->mode) == CS_MODE_DISABLED) + if (coresight_get_mode(drvdata->csdev) == CS_MODE_DISABLED) goto out; if (drvdata->config_type == TMC_CONFIG_TYPE_ETR) diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index f3281c958a57..77ef67c976e9 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -89,7 +89,7 @@ static void __tmc_etb_disable_hw(struct tmc_drvdata *drvdata) * When operating in sysFS mode the content of the buffer needs to be * read before the TMC is disabled. */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) tmc_etb_dump_hw(drvdata); tmc_disable_hw(drvdata); @@ -205,7 +205,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev) * sink is already enabled no memory is needed and the HW need not be * touched. */ - if (local_read(&csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(csdev) == CS_MODE_SYSFS) { csdev->refcnt++; goto out; } @@ -262,7 +262,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) * No need to continue if the ETB/ETF is already operated * from sysFS. */ - if (local_read(&csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(csdev) == CS_MODE_SYSFS) { ret = -EBUSY; break; } @@ -345,7 +345,7 @@ static int tmc_disable_etf_sink(struct coresight_device *csdev) } /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); + WARN_ON_ONCE(coresight_get_mode(csdev) == CS_MODE_DISABLED); tmc_etb_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; @@ -485,7 +485,7 @@ static unsigned long tmc_update_etf_buffer(struct coresight_device *csdev, return 0; /* This shouldn't happen */ - if (WARN_ON_ONCE(local_read(&csdev->mode) != CS_MODE_PERF)) + if (WARN_ON_ONCE(coresight_get_mode(csdev) != CS_MODE_PERF)) return 0; spin_lock_irqsave(&drvdata->spinlock, flags); @@ -631,7 +631,7 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) } /* Don't interfere if operated from Perf */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_PERF) { + if (coresight_get_mode(drvdata->csdev) == CS_MODE_PERF) { ret = -EINVAL; goto out; } @@ -643,7 +643,7 @@ int tmc_read_prepare_etb(struct tmc_drvdata *drvdata) } /* Disable the TMC if need be */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) { /* There is no point in reading a TMC in HW FIFO mode */ mode = readl_relaxed(drvdata->base + TMC_MODE); if (mode != TMC_MODE_CIRCULAR_BUFFER) { @@ -675,7 +675,7 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata) spin_lock_irqsave(&drvdata->spinlock, flags); /* Re-enable the TMC if need be */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) { /* There is no point in reading a TMC in HW FIFO mode */ mode = readl_relaxed(drvdata->base + TMC_MODE); if (mode != TMC_MODE_CIRCULAR_BUFFER) { diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 88a0fc375b4d..383cb8647589 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1143,7 +1143,7 @@ static void __tmc_etr_disable_hw(struct tmc_drvdata *drvdata) * When operating in sysFS mode the content of the buffer needs to be * read before the TMC is disabled. */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) tmc_etr_sync_sysfs_buf(drvdata); tmc_disable_hw(drvdata); @@ -1189,7 +1189,7 @@ static struct etr_buf *tmc_etr_get_sysfs_buffer(struct coresight_device *csdev) spin_lock_irqsave(&drvdata->spinlock, flags); } - if (drvdata->reading || local_read(&csdev->mode) == CS_MODE_PERF) { + if (drvdata->reading || coresight_get_mode(csdev) == CS_MODE_PERF) { ret = -EBUSY; goto out; } @@ -1230,7 +1230,7 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev) * sink is already enabled no memory is needed and the HW need not be * touched, even if the buffer size has changed. */ - if (local_read(&csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(csdev) == CS_MODE_SYSFS) { csdev->refcnt++; goto out; } @@ -1652,7 +1652,7 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data) spin_lock_irqsave(&drvdata->spinlock, flags); /* Don't use this sink if it is already claimed by sysFS */ - if (local_read(&csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(csdev) == CS_MODE_SYSFS) { rc = -EBUSY; goto unlock_out; } @@ -1726,7 +1726,7 @@ static int tmc_disable_etr_sink(struct coresight_device *csdev) } /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); + WARN_ON_ONCE(coresight_get_mode(csdev) == CS_MODE_DISABLED); tmc_etr_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; @@ -1778,7 +1778,7 @@ int tmc_read_prepare_etr(struct tmc_drvdata *drvdata) } /* Disable the TMC if we are trying to read from a running session. */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) __tmc_etr_disable_hw(drvdata); drvdata->reading = true; @@ -1800,7 +1800,7 @@ int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata) spin_lock_irqsave(&drvdata->spinlock, flags); /* RE-enable the TMC if need be */ - if (local_read(&drvdata->csdev->mode) == CS_MODE_SYSFS) { + if (coresight_get_mode(drvdata->csdev) == CS_MODE_SYSFS) { /* * The trace run will continue with the same allocated trace * buffer. Since the tracer is still enabled drvdata::buf can't diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index a92c5b750f81..903cfffe0bcd 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -207,7 +207,7 @@ static void smb_enable_sysfs(struct coresight_device *csdev) { struct smb_drv_data *drvdata = dev_get_drvdata(csdev->dev.parent); - if (local_read(&csdev->mode) != CS_MODE_DISABLED) + if (coresight_get_mode(csdev) != CS_MODE_DISABLED) return; smb_enable_hw(drvdata); @@ -253,8 +253,8 @@ static int smb_enable(struct coresight_device *csdev, enum cs_mode mode, return -EBUSY; /* Do nothing, the SMB is already enabled as other mode */ - if (local_read(&csdev->mode) != CS_MODE_DISABLED && - local_read(&csdev->mode) != mode) + if (coresight_get_mode(csdev) != CS_MODE_DISABLED && + coresight_get_mode(csdev) != mode) return -EBUSY; switch (mode) { @@ -291,7 +291,7 @@ static int smb_disable(struct coresight_device *csdev) return -EBUSY; /* Complain if we (somehow) got out of sync */ - WARN_ON_ONCE(local_read(&csdev->mode) == CS_MODE_DISABLED); + WARN_ON_ONCE(coresight_get_mode(csdev) == CS_MODE_DISABLED); smb_disable_hw(drvdata); diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 414bcbbdaf62..a49e4e20e899 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -591,6 +591,11 @@ static inline bool coresight_take_mode(struct coresight_device *csdev, CS_MODE_DISABLED; } +static inline enum cs_mode coresight_get_mode(struct coresight_device *csdev) +{ + return local_read(&csdev->mode); +} + extern struct coresight_device * coresight_register(struct coresight_desc *desc); extern void coresight_unregister(struct coresight_device *csdev); -- cgit v1.2.3 From bcaabb95f0c9883fb8e1112bd13eaba9cfd62c15 Mon Sep 17 00:00:00 2001 From: James Clark Date: Mon, 29 Jan 2024 15:40:43 +0000 Subject: coresight: Add helper for setting csdev->mode Now that mode is in struct coresight_device, sets can be wrapped. This also allows us to add a sanity check that there have been no concurrent modifications of mode. Currently all usages of local_set() were inside the device's spin locks so this new warning shouldn't be triggered. coresight_take_mode() could maybe have been used in place of adding the warning, but there may be use cases which set the mode to the same mode which are valid but would fail in coresight_take_mode() because it requires the device to only be in the disabled state. Signed-off-by: James Clark Link: https://lore.kernel.org/r/20240129154050.569566-13-james.clark@arm.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-etb10.c | 6 +++--- drivers/hwtracing/coresight/coresight-etm3x-core.c | 4 ++-- drivers/hwtracing/coresight/coresight-etm4x-core.c | 4 ++-- drivers/hwtracing/coresight/coresight-stm.c | 2 +- drivers/hwtracing/coresight/coresight-tmc-etf.c | 10 +++++----- drivers/hwtracing/coresight/coresight-tmc-etr.c | 6 +++--- drivers/hwtracing/coresight/ultrasoc-smb.c | 6 +++--- include/linux/coresight.h | 16 ++++++++++++++++ 8 files changed, 35 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index e3a54f7038ad..3aab182b562f 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -158,7 +158,7 @@ static int etb_enable_sysfs(struct coresight_device *csdev) if (ret) goto out; - local_set(&csdev->mode, CS_MODE_SYSFS); + coresight_set_mode(csdev, CS_MODE_SYSFS); } csdev->refcnt++; @@ -214,7 +214,7 @@ static int etb_enable_perf(struct coresight_device *csdev, void *data) if (!ret) { /* Associate with monitored process. */ drvdata->pid = pid; - local_set(&drvdata->csdev->mode, CS_MODE_PERF); + coresight_set_mode(drvdata->csdev, CS_MODE_PERF); csdev->refcnt++; } @@ -365,7 +365,7 @@ static int etb_disable(struct coresight_device *csdev) etb_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); spin_unlock_irqrestore(&drvdata->spinlock, flags); dev_dbg(&csdev->dev, "ETB disabled\n"); diff --git a/drivers/hwtracing/coresight/coresight-etm3x-core.c b/drivers/hwtracing/coresight/coresight-etm3x-core.c index 64ff53887ef5..9d5c1391ffb1 100644 --- a/drivers/hwtracing/coresight/coresight-etm3x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm3x-core.c @@ -576,7 +576,7 @@ static int etm_enable(struct coresight_device *csdev, struct perf_event *event, /* The tracer didn't start */ if (ret) - local_set(&drvdata->csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(drvdata->csdev, CS_MODE_DISABLED); return ret; } @@ -693,7 +693,7 @@ static void etm_disable(struct coresight_device *csdev, } if (mode) - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); } static const struct coresight_ops_source etm_source_ops = { diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index e65232e982a7..f087bc8d1da6 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -859,7 +859,7 @@ static int etm4_enable(struct coresight_device *csdev, struct perf_event *event, /* The tracer didn't start */ if (ret) - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); return ret; } @@ -1021,7 +1021,7 @@ static void etm4_disable(struct coresight_device *csdev, } if (mode) - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); } static const struct coresight_ops_source etm4_source_ops = { diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c index 1d02d42bea83..974d37e5f94c 100644 --- a/drivers/hwtracing/coresight/coresight-stm.c +++ b/drivers/hwtracing/coresight/coresight-stm.c @@ -272,7 +272,7 @@ static void stm_disable(struct coresight_device *csdev, pm_runtime_put(csdev->dev.parent); - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); dev_dbg(&csdev->dev, "STM tracing disabled\n"); } } diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c index 77ef67c976e9..d4f641cd9de6 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etf.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c @@ -228,7 +228,7 @@ static int tmc_enable_etf_sink_sysfs(struct coresight_device *csdev) ret = tmc_etb_enable_hw(drvdata); if (!ret) { - local_set(&csdev->mode, CS_MODE_SYSFS); + coresight_set_mode(csdev, CS_MODE_SYSFS); csdev->refcnt++; } else { /* Free up the buffer if we failed to enable */ @@ -292,7 +292,7 @@ static int tmc_enable_etf_sink_perf(struct coresight_device *csdev, void *data) if (!ret) { /* Associate with monitored process. */ drvdata->pid = pid; - local_set(&csdev->mode, CS_MODE_PERF); + coresight_set_mode(csdev, CS_MODE_PERF); csdev->refcnt++; } } while (0); @@ -349,7 +349,7 @@ static int tmc_disable_etf_sink(struct coresight_device *csdev) tmc_etb_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); spin_unlock_irqrestore(&drvdata->spinlock, flags); @@ -375,7 +375,7 @@ static int tmc_enable_etf_link(struct coresight_device *csdev, if (csdev->refcnt == 0) { ret = tmc_etf_enable_hw(drvdata); if (!ret) { - local_set(&csdev->mode, CS_MODE_SYSFS); + coresight_set_mode(csdev, CS_MODE_SYSFS); first_enable = true; } } @@ -405,7 +405,7 @@ static void tmc_disable_etf_link(struct coresight_device *csdev, csdev->refcnt--; if (csdev->refcnt == 0) { tmc_etf_disable_hw(drvdata); - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); last_disable = true; } spin_unlock_irqrestore(&drvdata->spinlock, flags); diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c index 383cb8647589..e75428fa1592 100644 --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c @@ -1237,7 +1237,7 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev) ret = tmc_etr_enable_hw(drvdata, sysfs_buf); if (!ret) { - local_set(&csdev->mode, CS_MODE_SYSFS); + coresight_set_mode(csdev, CS_MODE_SYSFS); csdev->refcnt++; } @@ -1684,7 +1684,7 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data) if (!rc) { /* Associate with monitored process. */ drvdata->pid = pid; - local_set(&csdev->mode, CS_MODE_PERF); + coresight_set_mode(csdev, CS_MODE_PERF); drvdata->perf_buf = etr_perf->etr_buf; csdev->refcnt++; } @@ -1730,7 +1730,7 @@ static int tmc_disable_etr_sink(struct coresight_device *csdev) tmc_etr_disable_hw(drvdata); /* Dissociate from monitored process. */ drvdata->pid = -1; - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); /* Reset perf specific data */ drvdata->perf_buf = NULL; diff --git a/drivers/hwtracing/coresight/ultrasoc-smb.c b/drivers/hwtracing/coresight/ultrasoc-smb.c index 903cfffe0bcd..f9ebf20c91e6 100644 --- a/drivers/hwtracing/coresight/ultrasoc-smb.c +++ b/drivers/hwtracing/coresight/ultrasoc-smb.c @@ -211,7 +211,7 @@ static void smb_enable_sysfs(struct coresight_device *csdev) return; smb_enable_hw(drvdata); - local_set(&csdev->mode, CS_MODE_SYSFS); + coresight_set_mode(csdev, CS_MODE_SYSFS); } static int smb_enable_perf(struct coresight_device *csdev, void *data) @@ -234,7 +234,7 @@ static int smb_enable_perf(struct coresight_device *csdev, void *data) if (drvdata->pid == -1) { smb_enable_hw(drvdata); drvdata->pid = pid; - local_set(&csdev->mode, CS_MODE_PERF); + coresight_set_mode(csdev, CS_MODE_PERF); } return 0; @@ -297,7 +297,7 @@ static int smb_disable(struct coresight_device *csdev) /* Dissociate from the target process. */ drvdata->pid = -1; - local_set(&csdev->mode, CS_MODE_DISABLED); + coresight_set_mode(csdev, CS_MODE_DISABLED); dev_dbg(&csdev->dev, "Ultrasoc SMB disabled\n"); return 0; diff --git a/include/linux/coresight.h b/include/linux/coresight.h index a49e4e20e899..5f288d475490 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -596,6 +596,22 @@ static inline enum cs_mode coresight_get_mode(struct coresight_device *csdev) return local_read(&csdev->mode); } +static inline void coresight_set_mode(struct coresight_device *csdev, + enum cs_mode new_mode) +{ + enum cs_mode current_mode = coresight_get_mode(csdev); + + /* + * Changing to a new mode must be done from an already disabled state + * unless it's synchronized with coresight_take_mode(). Otherwise the + * device is already in use and signifies a locking issue. + */ + WARN(new_mode != CS_MODE_DISABLED && current_mode != CS_MODE_DISABLED && + current_mode != new_mode, "Device already in use\n"); + + local_set(&csdev->mode, new_mode); +} + extern struct coresight_device * coresight_register(struct coresight_desc *desc); extern void coresight_unregister(struct coresight_device *csdev); -- cgit v1.2.3 From 9f0ea8e8344b8549af404f2f1ddb25e22d6b09e1 Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:32 +0800 Subject: coresight-tpdm: Optimize the store function of tpdm simple dataset Replace spin lock/unlock to avoid forgetting to unlock when the function exits. And refine methods for handling various conditions. Signed-off-by: Tao Zhang Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-2-git-send-email-quic_taozha@quicinc.com --- drivers/hwtracing/coresight/coresight-tpdm.c | 39 ++++++++++++++-------------- 1 file changed, 19 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index bd13a548375c..0427c0fc0bf3 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -77,51 +77,50 @@ static ssize_t tpdm_simple_dataset_store(struct device *dev, size_t size) { unsigned long val; - ssize_t ret = size; + ssize_t ret = -EINVAL; struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); struct tpdm_dataset_attribute *tpdm_attr = container_of(attr, struct tpdm_dataset_attribute, attr); if (kstrtoul(buf, 0, &val)) - return -EINVAL; + return ret; - spin_lock(&drvdata->spinlock); + guard(spinlock)(&drvdata->spinlock); switch (tpdm_attr->mem) { case DSB_TRIG_PATT: - if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) + if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) { drvdata->dsb->trig_patt[tpdm_attr->idx] = val; - else - ret = -EINVAL; + ret = size; + } break; case DSB_TRIG_PATT_MASK: - if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) + if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) { drvdata->dsb->trig_patt_mask[tpdm_attr->idx] = val; - else - ret = -EINVAL; + ret = size; + } break; case DSB_PATT: - if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) + if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) { drvdata->dsb->patt_val[tpdm_attr->idx] = val; - else - ret = -EINVAL; + ret = size; + } break; case DSB_PATT_MASK: - if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) + if (tpdm_attr->idx < TPDM_DSB_MAX_PATT) { drvdata->dsb->patt_mask[tpdm_attr->idx] = val; - else - ret = -EINVAL; + ret = size; + } break; case DSB_MSR: - if (tpdm_attr->idx < drvdata->dsb_msr_num) + if (tpdm_attr->idx < drvdata->dsb_msr_num) { drvdata->dsb->msr[tpdm_attr->idx] = val; - else - ret = -EINVAL; + ret = size; + } break; default: - ret = -EINVAL; + break; } - spin_unlock(&drvdata->spinlock); return ret; } -- cgit v1.2.3 From f021801c418e7a81455a410a5b195961349d8e93 Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:33 +0800 Subject: coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset Since the function tpdm_has_dsb_dataset will be called by TPDA driver in subsequent patches, it is moved to the header file. And move this judgement form the function __tpdm_{enable/disable} to the beginning of the function tpdm_{enable/disable}_dsb. Signed-off-by: Tao Zhang Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-3-git-send-email-quic_taozha@quicinc.com --- drivers/hwtracing/coresight/coresight-tpdm.c | 30 +++++++++++++--------------- drivers/hwtracing/coresight/coresight-tpdm.h | 4 ++++ 2 files changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index 0427c0fc0bf3..4b1296d11360 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -125,11 +125,6 @@ static ssize_t tpdm_simple_dataset_store(struct device *dev, return ret; } -static bool tpdm_has_dsb_dataset(struct tpdm_drvdata *drvdata) -{ - return (drvdata->datasets & TPDM_PIDR0_DS_DSB); -} - static umode_t tpdm_dsb_is_visible(struct kobject *kobj, struct attribute *attr, int n) { @@ -232,25 +227,27 @@ static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata) { u32 val, i; + if (!tpdm_has_dsb_dataset(drvdata)) + return; + for (i = 0; i < TPDM_DSB_MAX_EDCR; i++) writel_relaxed(drvdata->dsb->edge_ctrl[i], - drvdata->base + TPDM_DSB_EDCR(i)); + drvdata->base + TPDM_DSB_EDCR(i)); for (i = 0; i < TPDM_DSB_MAX_EDCMR; i++) writel_relaxed(drvdata->dsb->edge_ctrl_mask[i], - drvdata->base + TPDM_DSB_EDCMR(i)); + drvdata->base + TPDM_DSB_EDCMR(i)); for (i = 0; i < TPDM_DSB_MAX_PATT; i++) { writel_relaxed(drvdata->dsb->patt_val[i], - drvdata->base + TPDM_DSB_TPR(i)); + drvdata->base + TPDM_DSB_TPR(i)); writel_relaxed(drvdata->dsb->patt_mask[i], - drvdata->base + TPDM_DSB_TPMR(i)); + drvdata->base + TPDM_DSB_TPMR(i)); writel_relaxed(drvdata->dsb->trig_patt[i], - drvdata->base + TPDM_DSB_XPR(i)); + drvdata->base + TPDM_DSB_XPR(i)); writel_relaxed(drvdata->dsb->trig_patt_mask[i], - drvdata->base + TPDM_DSB_XPMR(i)); + drvdata->base + TPDM_DSB_XPMR(i)); } set_dsb_tier(drvdata); - set_dsb_msr(drvdata); val = readl_relaxed(drvdata->base + TPDM_DSB_CR); @@ -278,8 +275,7 @@ static void __tpdm_enable(struct tpdm_drvdata *drvdata) { CS_UNLOCK(drvdata->base); - if (tpdm_has_dsb_dataset(drvdata)) - tpdm_enable_dsb(drvdata); + tpdm_enable_dsb(drvdata); CS_LOCK(drvdata->base); } @@ -307,6 +303,9 @@ static void tpdm_disable_dsb(struct tpdm_drvdata *drvdata) { u32 val; + if (!tpdm_has_dsb_dataset(drvdata)) + return; + /* Set the enable bit of DSB control register to 0 */ val = readl_relaxed(drvdata->base + TPDM_DSB_CR); val &= ~TPDM_DSB_CR_ENA; @@ -318,8 +317,7 @@ static void __tpdm_disable(struct tpdm_drvdata *drvdata) { CS_UNLOCK(drvdata->base); - if (tpdm_has_dsb_dataset(drvdata)) - tpdm_disable_dsb(drvdata); + tpdm_disable_dsb(drvdata); CS_LOCK(drvdata->base); } diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index 4115b2a17b8d..ddaf333fa1c2 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -220,4 +220,8 @@ struct tpdm_dataset_attribute { u32 idx; }; +static bool tpdm_has_dsb_dataset(struct tpdm_drvdata *drvdata) +{ + return (drvdata->datasets & TPDM_PIDR0_DS_DSB); +} #endif /* _CORESIGHT_CORESIGHT_TPDM_H */ -- cgit v1.2.3 From a1705ffcce5268eb95a5e716ee32c9d181b8c228 Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:35 +0800 Subject: coresight-tpdm: Add CMB dataset support CMB (continuous multi-bit) is one of TPDM's dataset type. CMB subunit can be enabled for data collection by writing 1 to the first bit of CMB_CR register. This change is to add enable/disable function for CMB dataset by writing CMB_CR register. Reviewed-by: James Clark Signed-off-by: Tao Zhang Signed-off-by: Jinlong Mao Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-5-git-send-email-quic_taozha@quicinc.com --- drivers/hwtracing/coresight/coresight-tpdm.c | 28 ++++++++++++++++++++++++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 13 +++++++++++++ 2 files changed, 41 insertions(+) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index 4b1296d11360..1bb1d8e83501 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -263,6 +263,19 @@ static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata) writel_relaxed(val, drvdata->base + TPDM_DSB_CR); } +static void tpdm_enable_cmb(struct tpdm_drvdata *drvdata) +{ + u32 val; + + if (!tpdm_has_cmb_dataset(drvdata)) + return; + + val = readl_relaxed(drvdata->base + TPDM_CMB_CR); + /* Set the enable bit of CMB control register to 1 */ + val |= TPDM_CMB_CR_ENA; + writel_relaxed(val, drvdata->base + TPDM_CMB_CR); +} + /* * TPDM enable operations * The TPDM or Monitor serves as data collection component for various @@ -276,6 +289,7 @@ static void __tpdm_enable(struct tpdm_drvdata *drvdata) CS_UNLOCK(drvdata->base); tpdm_enable_dsb(drvdata); + tpdm_enable_cmb(drvdata); CS_LOCK(drvdata->base); } @@ -312,12 +326,26 @@ static void tpdm_disable_dsb(struct tpdm_drvdata *drvdata) writel_relaxed(val, drvdata->base + TPDM_DSB_CR); } +static void tpdm_disable_cmb(struct tpdm_drvdata *drvdata) +{ + u32 val; + + if (!tpdm_has_cmb_dataset(drvdata)) + return; + + val = readl_relaxed(drvdata->base + TPDM_CMB_CR); + /* Set the enable bit of CMB control register to 0 */ + val &= ~TPDM_CMB_CR_ENA; + writel_relaxed(val, drvdata->base + TPDM_CMB_CR); +} + /* TPDM disable operations */ static void __tpdm_disable(struct tpdm_drvdata *drvdata) { CS_UNLOCK(drvdata->base); tpdm_disable_dsb(drvdata); + tpdm_disable_cmb(drvdata); CS_LOCK(drvdata->base); } diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index ddaf333fa1c2..a442d9c6e4ac 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -9,6 +9,12 @@ /* The max number of the datasets that TPDM supports */ #define TPDM_DATASETS 7 +/* CMB Subunit Registers */ +#define TPDM_CMB_CR (0xA00) + +/* Enable bit for CMB subunit */ +#define TPDM_CMB_CR_ENA BIT(0) + /* DSB Subunit Registers */ #define TPDM_DSB_CR (0x780) #define TPDM_DSB_TIER (0x784) @@ -79,10 +85,12 @@ * * PERIPHIDR0[0] : Fix to 1 if ImplDef subunit present, else 0 * PERIPHIDR0[1] : Fix to 1 if DSB subunit present, else 0 + * PERIPHIDR0[2] : Fix to 1 if CMB subunit present, else 0 */ #define TPDM_PIDR0_DS_IMPDEF BIT(0) #define TPDM_PIDR0_DS_DSB BIT(1) +#define TPDM_PIDR0_DS_CMB BIT(2) #define TPDM_DSB_MAX_LINES 256 /* MAX number of EDCR registers */ @@ -224,4 +232,9 @@ static bool tpdm_has_dsb_dataset(struct tpdm_drvdata *drvdata) { return (drvdata->datasets & TPDM_PIDR0_DS_DSB); } + +static bool tpdm_has_cmb_dataset(struct tpdm_drvdata *drvdata) +{ + return (drvdata->datasets & TPDM_PIDR0_DS_CMB); +} #endif /* _CORESIGHT_CORESIGHT_TPDM_H */ -- cgit v1.2.3 From e6d7f5252f73cf21d3676de794916204524f51b5 Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:36 +0800 Subject: coresight-tpda: Add support to configure CMB element Read the CMB element size from the device tree. Set the register bit that controls the CMB element size of the corresponding port. Reviewed-by: James Clark Signed-off-by: Tao Zhang Signed-off-by: Mao Jinlong Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-6-git-send-email-quic_taozha@quicinc.com --- drivers/hwtracing/coresight/coresight-tpda.c | 130 +++++++++++++++------------ drivers/hwtracing/coresight/coresight-tpda.h | 6 ++ 2 files changed, 81 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index f8f6413cc711..6863afe7ca94 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -18,6 +18,7 @@ #include "coresight-priv.h" #include "coresight-tpda.h" #include "coresight-trace-id.h" +#include "coresight-tpdm.h" DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda"); @@ -28,24 +29,59 @@ static bool coresight_device_is_tpdm(struct coresight_device *csdev) CORESIGHT_DEV_SUBTYPE_SOURCE_TPDM); } +static void tpda_clear_element_size(struct coresight_device *csdev) +{ + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); + + drvdata->dsb_esize = 0; + drvdata->cmb_esize = 0; +} + +static void tpda_set_element_size(struct tpda_drvdata *drvdata, u32 *val) +{ + /* Clear all relevant fields */ + *val &= ~(TPDA_Pn_CR_DSBSIZE | TPDA_Pn_CR_CMBSIZE); + + if (drvdata->dsb_esize == 64) + *val |= TPDA_Pn_CR_DSBSIZE; + else if (drvdata->dsb_esize == 32) + *val &= ~TPDA_Pn_CR_DSBSIZE; + + if (drvdata->cmb_esize == 64) + *val |= FIELD_PREP(TPDA_Pn_CR_CMBSIZE, 0x2); + else if (drvdata->cmb_esize == 32) + *val |= FIELD_PREP(TPDA_Pn_CR_CMBSIZE, 0x1); + else if (drvdata->cmb_esize == 8) + *val &= ~TPDA_Pn_CR_CMBSIZE; +} + /* - * Read the DSB element size from the TPDM device + * Read the element size from the TPDM device. One TPDM must have at least one of the + * element size property. * Returns - * The dsb element size read from the devicetree if available. - * 0 - Otherwise, with a warning once. + * 0 - The element size property is read + * Others - Cannot read the property of the element size */ -static int tpdm_read_dsb_element_size(struct coresight_device *csdev) +static int tpdm_read_element_size(struct tpda_drvdata *drvdata, + struct coresight_device *csdev) { - int rc = 0; - u8 size = 0; + int rc = -EINVAL; + struct tpdm_drvdata *tpdm_data = dev_get_drvdata(csdev->dev.parent); + + if (tpdm_has_dsb_dataset(tpdm_data)) { + rc = fwnode_property_read_u8(dev_fwnode(csdev->dev.parent), + "qcom,dsb-element-size", &drvdata->dsb_esize); + } + if (tpdm_has_cmb_dataset(tpdm_data)) { + rc = fwnode_property_read_u32(dev_fwnode(csdev->dev.parent), + "qcom,cmb-element-bits", &drvdata->cmb_esize); + } - rc = fwnode_property_read_u8(dev_fwnode(csdev->dev.parent), - "qcom,dsb-element-size", &size); if (rc) dev_warn_once(&csdev->dev, - "Failed to read TPDM DSB Element size: %d\n", rc); + "Failed to read TPDM Element size: %d\n", rc); - return size; + return rc; } /* @@ -56,11 +92,12 @@ static int tpdm_read_dsb_element_size(struct coresight_device *csdev) * Parameter "inport" is used to pass in the input port number * of TPDA, and it is set to -1 in the recursize call. */ -static int tpda_get_element_size(struct coresight_device *csdev, +static int tpda_get_element_size(struct tpda_drvdata *drvdata, + struct coresight_device *csdev, int inport) { - int dsb_size = -ENOENT; - int i, size; + int rc = 0; + int i; struct coresight_device *in; for (i = 0; i < csdev->pdata->nr_inconns; i++) { @@ -69,30 +106,26 @@ static int tpda_get_element_size(struct coresight_device *csdev, continue; /* Ignore the paths that do not match port */ - if (inport > 0 && + if (inport >= 0 && csdev->pdata->in_conns[i]->dest_port != inport) continue; if (coresight_device_is_tpdm(in)) { - size = tpdm_read_dsb_element_size(in); + if (drvdata->dsb_esize || drvdata->cmb_esize) + return -EEXIST; + rc = tpdm_read_element_size(drvdata, in); + if (rc) + return rc; } else { /* Recurse down the path */ - size = tpda_get_element_size(in, -1); - } - - if (size < 0) - return size; - - if (dsb_size < 0) { - /* Found a size, save it. */ - dsb_size = size; - } else { - /* Found duplicate TPDMs */ - return -EEXIST; + rc = tpda_get_element_size(drvdata, in, -1); + if (rc) + return rc; } } - return dsb_size; + + return rc; } /* Settings pre enabling port control register */ @@ -109,37 +142,24 @@ static void tpda_enable_pre_port(struct tpda_drvdata *drvdata) static int tpda_enable_port(struct tpda_drvdata *drvdata, int port) { u32 val; - int size; + int rc; val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); - /* - * Configure aggregator port n DSB data set element size - * Set the bit to 0 if the size is 32 - * Set the bit to 1 if the size is 64 - */ - size = tpda_get_element_size(drvdata->csdev, port); - switch (size) { - case 32: - val &= ~TPDA_Pn_CR_DSBSIZE; - break; - case 64: - val |= TPDA_Pn_CR_DSBSIZE; - break; - case 0: - return -EEXIST; - case -EEXIST: + tpda_clear_element_size(drvdata->csdev); + rc = tpda_get_element_size(drvdata, drvdata->csdev, port); + if (!rc && (drvdata->dsb_esize || drvdata->cmb_esize)) { + tpda_set_element_size(drvdata, &val); + /* Enable the port */ + val |= TPDA_Pn_CR_ENA; + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); + } else if (rc == -EEXIST) dev_warn_once(&drvdata->csdev->dev, - "Detected multiple TPDMs on port %d", -EEXIST); - return -EEXIST; - default: - return -EINVAL; - } - - /* Enable the port */ - val |= TPDA_Pn_CR_ENA; - writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); + "Detected multiple TPDMs on port %d", port); + else + dev_warn_once(&drvdata->csdev->dev, + "Didn't find TPDM element size"); - return 0; + return rc; } static int __tpda_enable(struct tpda_drvdata *drvdata, int port) diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h index b3b38fd41b64..19af64120fcf 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.h +++ b/drivers/hwtracing/coresight/coresight-tpda.h @@ -10,6 +10,8 @@ #define TPDA_Pn_CR(n) (0x004 + (n * 4)) /* Aggregator port enable bit */ #define TPDA_Pn_CR_ENA BIT(0) +/* Aggregator port CMB data set element size bit */ +#define TPDA_Pn_CR_CMBSIZE GENMASK(7, 6) /* Aggregator port DSB data set element size bit */ #define TPDA_Pn_CR_DSBSIZE BIT(8) @@ -25,6 +27,8 @@ * @csdev: component vitals needed by the framework. * @spinlock: lock for the drvdata value. * @enable: enable status of the component. + * @dsb_esize Record the DSB element size. + * @cmb_esize Record the CMB element size. */ struct tpda_drvdata { void __iomem *base; @@ -32,6 +36,8 @@ struct tpda_drvdata { struct coresight_device *csdev; spinlock_t spinlock; u8 atid; + u8 dsb_esize; + u32 cmb_esize; }; #endif /* _CORESIGHT_CORESIGHT_TPDA_H */ -- cgit v1.2.3 From 2d9ab11c262e39f3bc829d0679257ab942d5878f Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:37 +0800 Subject: coresight-tpdm: Add support to configure CMB TPDM CMB subunits support two forms of CMB data set element creation: continuous and trace-on-change collection mode. Continuous change creates CMB data set elements on every CMBCLK edge. Trace-on-change creates CMB data set elements only when a new data set element differs in value from the previous element in a CMB data set. Set CMB_CR.MODE to 0 for continuous CMB collection mode. Set CMB_CR.MODE to 1 for trace-on-change CMB collection mode. Reviewed-by: James Clark Signed-off-by: Tao Zhang Signed-off-by: Jinlong Mao Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-7-git-send-email-quic_taozha@quicinc.com --- .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 14 +++++ drivers/hwtracing/coresight/coresight-tpdm.c | 60 ++++++++++++++++++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 12 +++++ 3 files changed, 86 insertions(+) (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index 4dd49b159543..6dfb18d6d64a 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -170,3 +170,17 @@ Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) /cmb_mode +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: (Write) Set the data collection mode of CMB tpdm. Continuous + change creates CMB data set elements on every CMBCLK edge. + Trace-on-change creates CMB data set elements only when a new + data set element differs in value from the previous element + in a CMB data set. + + Accepts only one of the 2 values - 0 or 1. + 0 : Continuous CMB collection mode. + 1 : Trace-on-change CMB collection mode. diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index 1bb1d8e83501..b20071460375 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -137,6 +137,18 @@ static umode_t tpdm_dsb_is_visible(struct kobject *kobj, return 0; } +static umode_t tpdm_cmb_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + + if (drvdata && tpdm_has_cmb_dataset(drvdata)) + return attr->mode; + + return 0; +} + static umode_t tpdm_dsb_msr_is_visible(struct kobject *kobj, struct attribute *attr, int n) { @@ -161,6 +173,9 @@ static void tpdm_reset_datasets(struct tpdm_drvdata *drvdata) drvdata->dsb->trig_ts = true; drvdata->dsb->trig_type = false; } + + if (drvdata->cmb) + memset(drvdata->cmb, 0, sizeof(struct cmb_dataset)); } static void set_dsb_mode(struct tpdm_drvdata *drvdata, u32 *val) @@ -391,6 +406,12 @@ static int tpdm_datasets_setup(struct tpdm_drvdata *drvdata) if (!drvdata->dsb) return -ENOMEM; } + if (tpdm_has_cmb_dataset(drvdata) && (!drvdata->cmb)) { + drvdata->cmb = devm_kzalloc(drvdata->dev, + sizeof(*drvdata->cmb), GFP_KERNEL); + if (!drvdata->cmb) + return -ENOMEM; + } tpdm_reset_datasets(drvdata); return 0; @@ -729,6 +750,34 @@ static ssize_t dsb_trig_ts_store(struct device *dev, } static DEVICE_ATTR_RW(dsb_trig_ts); +static ssize_t cmb_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + + return sysfs_emit(buf, "%x\n", drvdata->cmb->trace_mode); + +} + +static ssize_t cmb_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t size) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + unsigned long trace_mode; + + if (kstrtoul(buf, 0, &trace_mode) || (trace_mode & ~1UL)) + return -EINVAL; + + spin_lock(&drvdata->spinlock); + drvdata->cmb->trace_mode = trace_mode; + spin_unlock(&drvdata->spinlock); + return size; +} +static DEVICE_ATTR_RW(cmb_mode); + static struct attribute *tpdm_dsb_edge_attrs[] = { &dev_attr_ctrl_idx.attr, &dev_attr_ctrl_val.attr, @@ -845,6 +894,11 @@ static struct attribute *tpdm_dsb_attrs[] = { NULL, }; +static struct attribute *tpdm_cmb_attrs[] = { + &dev_attr_cmb_mode.attr, + NULL, +}; + static struct attribute_group tpdm_dsb_attr_grp = { .attrs = tpdm_dsb_attrs, .is_visible = tpdm_dsb_is_visible, @@ -874,6 +928,11 @@ static struct attribute_group tpdm_dsb_msr_grp = { .name = "dsb_msr", }; +static struct attribute_group tpdm_cmb_attr_grp = { + .attrs = tpdm_cmb_attrs, + .is_visible = tpdm_cmb_is_visible, +}; + static const struct attribute_group *tpdm_attr_grps[] = { &tpdm_attr_grp, &tpdm_dsb_attr_grp, @@ -881,6 +940,7 @@ static const struct attribute_group *tpdm_attr_grps[] = { &tpdm_dsb_trig_patt_grp, &tpdm_dsb_patt_grp, &tpdm_dsb_msr_grp, + &tpdm_cmb_attr_grp, NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index a442d9c6e4ac..2af92c270ed1 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -14,6 +14,8 @@ /* Enable bit for CMB subunit */ #define TPDM_CMB_CR_ENA BIT(0) +/* Trace collection mode for CMB subunit */ +#define TPDM_CMB_CR_MODE BIT(1) /* DSB Subunit Registers */ #define TPDM_DSB_CR (0x780) @@ -181,6 +183,14 @@ struct dsb_dataset { bool trig_type; }; +/** + * struct cmb_dataset + * @trace_mode: Dataset collection mode + */ +struct cmb_dataset { + u32 trace_mode; +}; + /** * struct tpdm_drvdata - specifics associated to an TPDM component * @base: memory mapped base address for this component. @@ -190,6 +200,7 @@ struct dsb_dataset { * @enable: enable status of the component. * @datasets: The datasets types present of the TPDM. * @dsb Specifics associated to TPDM DSB. + * @cmb Specifics associated to TPDM CMB. * @dsb_msr_num Number of MSR supported by DSB TPDM */ @@ -201,6 +212,7 @@ struct tpdm_drvdata { bool enable; unsigned long datasets; struct dsb_dataset *dsb; + struct cmb_dataset *cmb; u32 dsb_msr_num; }; -- cgit v1.2.3 From 53d4a017a52458d835a1f9524df09c65c2208400 Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:38 +0800 Subject: coresight-tpdm: Add pattern registers support for CMB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Timestamps are requested if the monitor’s CMB data set unit input data matches the value in the Monitor CMB timestamp pattern and mask registers (M_CMB_TPR and M_CMB_TPMR) when CMB timestamp enabled via the timestamp insertion enable register bit(CMB_TIER.PATT_TSENAB). The pattern match trigger output is achieved via setting values into the CMB trigger pattern and mask registers (CMB_XPR and CMB_XPMR). After configuring a pattern through these registers, the TPDM subunit will assert an output trigger every time it receives new input data that matches the configured pattern value. Values in a given bit number of the mask register correspond to the same bit number in the corresponding pattern register. Reviewed-by: James Clark Signed-off-by: Tao Zhang Signed-off-by: Jinlong Mao Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-8-git-send-email-quic_taozha@quicinc.com --- .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 30 +++++++ drivers/hwtracing/coresight/coresight-tpdm.c | 96 +++++++++++++++++++++- drivers/hwtracing/coresight/coresight-tpdm.h | 39 +++++++++ 3 files changed, 164 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index 6dfb18d6d64a..b6cf050861ed 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -184,3 +184,33 @@ Description: (Write) Set the data collection mode of CMB tpdm. Continuous Accepts only one of the 2 values - 0 or 1. 0 : Continuous CMB collection mode. 1 : Trace-on-change CMB collection mode. + +What: /sys/bus/coresight/devices//cmb_trig_patt/xpr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (RW) Set/Get the value of the trigger pattern for the CMB + subunit TPDM. + +What: /sys/bus/coresight/devices//cmb_trig_patt/xpmr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (RW) Set/Get the mask of the trigger pattern for the CMB + subunit TPDM. + +What: /sys/bus/coresight/devices//dsb_patt/tpr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (RW) Set/Get the value of the pattern for the CMB subunit TPDM. + +What: /sys/bus/coresight/devices//dsb_patt/tpmr[0:1] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (RW) Set/Get the mask of the pattern for the CMB subunit TPDM. diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index b20071460375..07587287d9fa 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -66,6 +66,26 @@ static ssize_t tpdm_simple_dataset_show(struct device *dev, return -EINVAL; return sysfs_emit(buf, "0x%x\n", drvdata->dsb->msr[tpdm_attr->idx]); + case CMB_TRIG_PATT: + if (tpdm_attr->idx >= TPDM_CMB_MAX_PATT) + return -EINVAL; + return sysfs_emit(buf, "0x%x\n", + drvdata->cmb->trig_patt[tpdm_attr->idx]); + case CMB_TRIG_PATT_MASK: + if (tpdm_attr->idx >= TPDM_CMB_MAX_PATT) + return -EINVAL; + return sysfs_emit(buf, "0x%x\n", + drvdata->cmb->trig_patt_mask[tpdm_attr->idx]); + case CMB_PATT: + if (tpdm_attr->idx >= TPDM_CMB_MAX_PATT) + return -EINVAL; + return sysfs_emit(buf, "0x%x\n", + drvdata->cmb->patt_val[tpdm_attr->idx]); + case CMB_PATT_MASK: + if (tpdm_attr->idx >= TPDM_CMB_MAX_PATT) + return -EINVAL; + return sysfs_emit(buf, "0x%x\n", + drvdata->cmb->patt_mask[tpdm_attr->idx]); } return -EINVAL; } @@ -118,6 +138,30 @@ static ssize_t tpdm_simple_dataset_store(struct device *dev, ret = size; } break; + case CMB_TRIG_PATT: + if (tpdm_attr->idx < TPDM_CMB_MAX_PATT) { + drvdata->cmb->trig_patt[tpdm_attr->idx] = val; + ret = size; + } + break; + case CMB_TRIG_PATT_MASK: + if (tpdm_attr->idx < TPDM_CMB_MAX_PATT) { + drvdata->cmb->trig_patt_mask[tpdm_attr->idx] = val; + ret = size; + } + break; + case CMB_PATT: + if (tpdm_attr->idx < TPDM_CMB_MAX_PATT) { + drvdata->cmb->patt_val[tpdm_attr->idx] = val; + ret = size; + } + break; + case CMB_PATT_MASK: + if (tpdm_attr->idx < TPDM_CMB_MAX_PATT) { + drvdata->cmb->patt_mask[tpdm_attr->idx] = val; + ret = size; + } + break; default: break; } @@ -280,12 +324,32 @@ static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata) static void tpdm_enable_cmb(struct tpdm_drvdata *drvdata) { - u32 val; + u32 val, i; if (!tpdm_has_cmb_dataset(drvdata)) return; + /* Configure pattern registers */ + for (i = 0; i < TPDM_CMB_MAX_PATT; i++) { + writel_relaxed(drvdata->cmb->patt_val[i], + drvdata->base + TPDM_CMB_TPR(i)); + writel_relaxed(drvdata->cmb->patt_mask[i], + drvdata->base + TPDM_CMB_TPMR(i)); + writel_relaxed(drvdata->cmb->trig_patt[i], + drvdata->base + TPDM_CMB_XPR(i)); + writel_relaxed(drvdata->cmb->trig_patt_mask[i], + drvdata->base + TPDM_CMB_XPMR(i)); + } + val = readl_relaxed(drvdata->base + TPDM_CMB_CR); + /* + * Set to 0 for continuous CMB collection mode, + * 1 for trace-on-change CMB collection mode. + */ + if (drvdata->cmb->trace_mode) + val |= TPDM_CMB_CR_MODE; + else + val &= ~TPDM_CMB_CR_MODE; /* Set the enable bit of CMB control register to 1 */ val |= TPDM_CMB_CR_ENA; writel_relaxed(val, drvdata->base + TPDM_CMB_CR); @@ -887,6 +951,22 @@ static struct attribute *tpdm_dsb_msr_attrs[] = { NULL, }; +static struct attribute *tpdm_cmb_trig_patt_attrs[] = { + CMB_TRIG_PATT_ATTR(0), + CMB_TRIG_PATT_ATTR(1), + CMB_TRIG_PATT_MASK_ATTR(0), + CMB_TRIG_PATT_MASK_ATTR(1), + NULL, +}; + +static struct attribute *tpdm_cmb_patt_attrs[] = { + CMB_PATT_ATTR(0), + CMB_PATT_ATTR(1), + CMB_PATT_MASK_ATTR(0), + CMB_PATT_MASK_ATTR(1), + NULL, +}; + static struct attribute *tpdm_dsb_attrs[] = { &dev_attr_dsb_mode.attr, &dev_attr_dsb_trig_ts.attr, @@ -933,6 +1013,18 @@ static struct attribute_group tpdm_cmb_attr_grp = { .is_visible = tpdm_cmb_is_visible, }; +static struct attribute_group tpdm_cmb_trig_patt_grp = { + .attrs = tpdm_cmb_trig_patt_attrs, + .is_visible = tpdm_cmb_is_visible, + .name = "cmb_trig_patt", +}; + +static struct attribute_group tpdm_cmb_patt_grp = { + .attrs = tpdm_cmb_patt_attrs, + .is_visible = tpdm_cmb_is_visible, + .name = "cmb_patt", +}; + static const struct attribute_group *tpdm_attr_grps[] = { &tpdm_attr_grp, &tpdm_dsb_attr_grp, @@ -941,6 +1033,8 @@ static const struct attribute_group *tpdm_attr_grps[] = { &tpdm_dsb_patt_grp, &tpdm_dsb_msr_grp, &tpdm_cmb_attr_grp, + &tpdm_cmb_trig_patt_grp, + &tpdm_cmb_patt_grp, NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index 2af92c270ed1..e5d4c22cd38c 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -11,12 +11,23 @@ /* CMB Subunit Registers */ #define TPDM_CMB_CR (0xA00) +/* CMB subunit timestamp pattern registers */ +#define TPDM_CMB_TPR(n) (0xA08 + (n * 4)) +/* CMB subunit timestamp pattern mask registers */ +#define TPDM_CMB_TPMR(n) (0xA10 + (n * 4)) +/* CMB subunit trigger pattern registers */ +#define TPDM_CMB_XPR(n) (0xA18 + (n * 4)) +/* CMB subunit trigger pattern mask registers */ +#define TPDM_CMB_XPMR(n) (0xA20 + (n * 4)) /* Enable bit for CMB subunit */ #define TPDM_CMB_CR_ENA BIT(0) /* Trace collection mode for CMB subunit */ #define TPDM_CMB_CR_MODE BIT(1) +/* Patten register number */ +#define TPDM_CMB_MAX_PATT 2 + /* DSB Subunit Registers */ #define TPDM_DSB_CR (0x780) #define TPDM_DSB_TIER (0x784) @@ -151,6 +162,22 @@ tpdm_simple_dataset_rw(msr##nr, \ DSB_MSR, nr) +#define CMB_TRIG_PATT_ATTR(nr) \ + tpdm_simple_dataset_rw(xpr##nr, \ + CMB_TRIG_PATT, nr) + +#define CMB_TRIG_PATT_MASK_ATTR(nr) \ + tpdm_simple_dataset_rw(xpmr##nr, \ + CMB_TRIG_PATT_MASK, nr) + +#define CMB_PATT_ATTR(nr) \ + tpdm_simple_dataset_rw(tpr##nr, \ + CMB_PATT, nr) + +#define CMB_PATT_MASK_ATTR(nr) \ + tpdm_simple_dataset_rw(tpmr##nr, \ + CMB_PATT_MASK, nr) + /** * struct dsb_dataset - specifics associated to dsb dataset * @mode: DSB programming mode @@ -186,9 +213,17 @@ struct dsb_dataset { /** * struct cmb_dataset * @trace_mode: Dataset collection mode + * @patt_val: Save value for pattern + * @patt_mask: Save value for pattern mask + * @trig_patt: Save value for trigger pattern + * @trig_patt_mask: Save value for trigger pattern mask */ struct cmb_dataset { u32 trace_mode; + u32 patt_val[TPDM_CMB_MAX_PATT]; + u32 patt_mask[TPDM_CMB_MAX_PATT]; + u32 trig_patt[TPDM_CMB_MAX_PATT]; + u32 trig_patt_mask[TPDM_CMB_MAX_PATT]; }; /** @@ -225,6 +260,10 @@ enum dataset_mem { DSB_PATT, DSB_PATT_MASK, DSB_MSR, + CMB_TRIG_PATT, + CMB_TRIG_PATT_MASK, + CMB_PATT, + CMB_PATT_MASK }; /** -- cgit v1.2.3 From dc6ce57e2aa0b10b0b78517245ea0ba47eed75b1 Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:39 +0800 Subject: coresight-tpdm: Add timestamp control register support for the CMB CMB_TIER register is CMB subunit timestamp insertion enable register. Bit 0 is PATT_TSENAB bit. Set this bit to 1 to request a timestamp following a CMB interface pattern match. Bit 1 is XTRIG_TSENAB bit. Set this bit to 1 to request a timestamp following a CMB CTI timestamp request. Bit 2 is TS_ALL bit. Set this bit to 1 to request timestamp for all packets. Reviewed-by: James Clark Signed-off-by: Tao Zhang Signed-off-by: Jinlong Mao Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-9-git-send-email-quic_taozha@quicinc.com --- .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 35 ++++++ drivers/hwtracing/coresight/coresight-tpdm.c | 121 +++++++++++++++++++-- drivers/hwtracing/coresight/coresight-tpdm.h | 31 ++++++ 3 files changed, 180 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index b6cf050861ed..e8c76ce4dd15 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -214,3 +214,38 @@ KernelVersion 6.9 Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) Description: (RW) Set/Get the mask of the pattern for the CMB subunit TPDM. + +What: /sys/bus/coresight/devices//cmb_patt/enable_ts +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (Write) Set the pattern timestamp of CMB tpdm. Read + the pattern timestamp of CMB tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Disable CMB pattern timestamp. + 1 : Enable CMB pattern timestamp. + +What: /sys/bus/coresight/devices//cmb_trig_ts +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (RW) Set/Get the trigger timestamp of the CMB for tpdm. + + Accepts only one of the 2 values - 0 or 1. + 0 : Set the CMB trigger type to false + 1 : Set the CMB trigger type to true + +What: /sys/bus/coresight/devices//cmb_ts_all +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (RW) Read or write the status of timestamp upon all interface. + Only value 0 and 1 can be written to this node. Set this node to 1 to requeset + timestamp to all trace packet. + Accepts only one of the 2 values - 0 or 1. + 0 : Disable the timestamp of all trace packets. + 1 : Enable the timestamp of all trace packets. diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index 07587287d9fa..22966d541230 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -322,6 +322,31 @@ static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata) writel_relaxed(val, drvdata->base + TPDM_DSB_CR); } +static void set_cmb_tier(struct tpdm_drvdata *drvdata) +{ + u32 val; + + val = readl_relaxed(drvdata->base + TPDM_CMB_TIER); + + /* Clear all relevant fields */ + val &= ~(TPDM_CMB_TIER_PATT_TSENAB | TPDM_CMB_TIER_TS_ALL | + TPDM_CMB_TIER_XTRIG_TSENAB); + + /* Set pattern timestamp type and enablement */ + if (drvdata->cmb->patt_ts) + val |= TPDM_CMB_TIER_PATT_TSENAB; + + /* Set trigger timestamp */ + if (drvdata->cmb->trig_ts) + val |= TPDM_CMB_TIER_XTRIG_TSENAB; + + /* Set all timestamp enablement*/ + if (drvdata->cmb->ts_all) + val |= TPDM_CMB_TIER_TS_ALL; + + writel_relaxed(val, drvdata->base + TPDM_CMB_TIER); +} + static void tpdm_enable_cmb(struct tpdm_drvdata *drvdata) { u32 val, i; @@ -341,6 +366,8 @@ static void tpdm_enable_cmb(struct tpdm_drvdata *drvdata) drvdata->base + TPDM_CMB_XPMR(i)); } + set_cmb_tier(drvdata); + val = readl_relaxed(drvdata->base + TPDM_CMB_CR); /* * Set to 0 for continuous CMB collection mode, @@ -687,9 +714,18 @@ static ssize_t enable_ts_show(struct device *dev, char *buf) { struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct tpdm_dataset_attribute *tpdm_attr = + container_of(attr, struct tpdm_dataset_attribute, attr); + ssize_t size = -EINVAL; - return sysfs_emit(buf, "%u\n", - (unsigned int)drvdata->dsb->patt_ts); + if (tpdm_attr->mem == DSB_PATT) + size = sysfs_emit(buf, "%u\n", + (unsigned int)drvdata->dsb->patt_ts); + else if (tpdm_attr->mem == CMB_PATT) + size = sysfs_emit(buf, "%u\n", + (unsigned int)drvdata->cmb->patt_ts); + + return size; } /* @@ -701,17 +737,23 @@ static ssize_t enable_ts_store(struct device *dev, size_t size) { struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + struct tpdm_dataset_attribute *tpdm_attr = + container_of(attr, struct tpdm_dataset_attribute, attr); unsigned long val; if ((kstrtoul(buf, 0, &val)) || (val & ~1UL)) return -EINVAL; - spin_lock(&drvdata->spinlock); - drvdata->dsb->patt_ts = !!val; - spin_unlock(&drvdata->spinlock); + guard(spinlock)(&drvdata->spinlock); + if (tpdm_attr->mem == DSB_PATT) + drvdata->dsb->patt_ts = !!val; + else if (tpdm_attr->mem == CMB_PATT) + drvdata->cmb->patt_ts = !!val; + else + return -EINVAL; + return size; } -static DEVICE_ATTR_RW(enable_ts); static ssize_t set_type_show(struct device *dev, struct device_attribute *attr, @@ -842,6 +884,68 @@ static ssize_t cmb_mode_store(struct device *dev, } static DEVICE_ATTR_RW(cmb_mode); +static ssize_t cmb_ts_all_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + + return sysfs_emit(buf, "%u\n", + (unsigned int)drvdata->cmb->ts_all); +} + +static ssize_t cmb_ts_all_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t size) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + unsigned long val; + + if ((kstrtoul(buf, 0, &val)) || (val & ~1UL)) + return -EINVAL; + + guard(spinlock)(&drvdata->spinlock); + if (val) + drvdata->cmb->ts_all = true; + else + drvdata->cmb->ts_all = false; + + return size; +} +static DEVICE_ATTR_RW(cmb_ts_all); + +static ssize_t cmb_trig_ts_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + + return sysfs_emit(buf, "%u\n", + (unsigned int)drvdata->cmb->trig_ts); +} + +static ssize_t cmb_trig_ts_store(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t size) +{ + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + unsigned long val; + + if ((kstrtoul(buf, 0, &val)) || (val & ~1UL)) + return -EINVAL; + + guard(spinlock)(&drvdata->spinlock); + if (val) + drvdata->cmb->trig_ts = true; + else + drvdata->cmb->trig_ts = false; + + return size; +} +static DEVICE_ATTR_RW(cmb_trig_ts); + static struct attribute *tpdm_dsb_edge_attrs[] = { &dev_attr_ctrl_idx.attr, &dev_attr_ctrl_val.attr, @@ -910,7 +1014,7 @@ static struct attribute *tpdm_dsb_patt_attrs[] = { DSB_PATT_MASK_ATTR(5), DSB_PATT_MASK_ATTR(6), DSB_PATT_MASK_ATTR(7), - &dev_attr_enable_ts.attr, + DSB_PATT_ENABLE_TS, &dev_attr_set_type.attr, NULL, }; @@ -964,6 +1068,7 @@ static struct attribute *tpdm_cmb_patt_attrs[] = { CMB_PATT_ATTR(1), CMB_PATT_MASK_ATTR(0), CMB_PATT_MASK_ATTR(1), + CMB_PATT_ENABLE_TS, NULL, }; @@ -976,6 +1081,8 @@ static struct attribute *tpdm_dsb_attrs[] = { static struct attribute *tpdm_cmb_attrs[] = { &dev_attr_cmb_mode.attr, + &dev_attr_cmb_ts_all.attr, + &dev_attr_cmb_trig_ts.attr, NULL, }; diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index e5d4c22cd38c..6d1fe4aed7d0 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -11,6 +11,8 @@ /* CMB Subunit Registers */ #define TPDM_CMB_CR (0xA00) +/* CMB subunit timestamp insertion enable register */ +#define TPDM_CMB_TIER (0xA04) /* CMB subunit timestamp pattern registers */ #define TPDM_CMB_TPR(n) (0xA08 + (n * 4)) /* CMB subunit timestamp pattern mask registers */ @@ -24,6 +26,12 @@ #define TPDM_CMB_CR_ENA BIT(0) /* Trace collection mode for CMB subunit */ #define TPDM_CMB_CR_MODE BIT(1) +/* Timestamp control for pattern match */ +#define TPDM_CMB_TIER_PATT_TSENAB BIT(0) +/* CMB CTI timestamp request */ +#define TPDM_CMB_TIER_XTRIG_TSENAB BIT(1) +/* For timestamp fo all trace */ +#define TPDM_CMB_TIER_TS_ALL BIT(2) /* Patten register number */ #define TPDM_CMB_MAX_PATT 2 @@ -134,6 +142,15 @@ } \ })[0].attr.attr) +#define tpdm_patt_enable_ts(name, mem) \ + (&((struct tpdm_dataset_attribute[]) { \ + { \ + __ATTR(name, 0644, enable_ts_show, \ + enable_ts_store), \ + mem, \ + } \ + })[0].attr.attr) + #define DSB_EDGE_CTRL_ATTR(nr) \ tpdm_simple_dataset_ro(edcr##nr, \ DSB_EDGE_CTRL, nr) @@ -158,6 +175,10 @@ tpdm_simple_dataset_rw(tpmr##nr, \ DSB_PATT_MASK, nr) +#define DSB_PATT_ENABLE_TS \ + tpdm_patt_enable_ts(enable_ts, \ + DSB_PATT) + #define DSB_MSR_ATTR(nr) \ tpdm_simple_dataset_rw(msr##nr, \ DSB_MSR, nr) @@ -178,6 +199,10 @@ tpdm_simple_dataset_rw(tpmr##nr, \ CMB_PATT_MASK, nr) +#define CMB_PATT_ENABLE_TS \ + tpdm_patt_enable_ts(enable_ts, \ + CMB_PATT) + /** * struct dsb_dataset - specifics associated to dsb dataset * @mode: DSB programming mode @@ -217,6 +242,9 @@ struct dsb_dataset { * @patt_mask: Save value for pattern mask * @trig_patt: Save value for trigger pattern * @trig_patt_mask: Save value for trigger pattern mask + * @patt_ts: Indicates if pattern match for timestamp is enabled. + * @trig_ts: Indicates if CTI trigger for timestamp is enabled. + * @ts_all: Indicates if timestamp is enabled for all packets. */ struct cmb_dataset { u32 trace_mode; @@ -224,6 +252,9 @@ struct cmb_dataset { u32 patt_mask[TPDM_CMB_MAX_PATT]; u32 trig_patt[TPDM_CMB_MAX_PATT]; u32 trig_patt_mask[TPDM_CMB_MAX_PATT]; + bool patt_ts; + bool trig_ts; + bool ts_all; }; /** -- cgit v1.2.3 From 8e8804145a46e092c5207bb1258d29236a2cbcaa Mon Sep 17 00:00:00 2001 From: Tao Zhang Date: Sun, 4 Feb 2024 13:30:41 +0800 Subject: coresight-tpdm: Add msr register support for CMB Add the nodes for CMB subunit MSR(mux select register) support. CMB MSRs(mux select registers) is to separate mux, arbitration, interleaving,data packing control from stream filtering control. Reviewed-by: James Clark Signed-off-by: Tao Zhang Signed-off-by: Mao Jinlong Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/1707024641-22460-11-git-send-email-quic_taozha@quicinc.com --- .../ABI/testing/sysfs-bus-coresight-devices-tpdm | 8 ++ drivers/hwtracing/coresight/coresight-tpdm.c | 85 ++++++++++++++++++++++ drivers/hwtracing/coresight/coresight-tpdm.h | 16 +++- 3 files changed, 108 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm index e8c76ce4dd15..b4d0fc8d319d 100644 --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm @@ -249,3 +249,11 @@ Description: Accepts only one of the 2 values - 0 or 1. 0 : Disable the timestamp of all trace packets. 1 : Enable the timestamp of all trace packets. + +What: /sys/bus/coresight/devices//cmb_msr/msr[0:31] +Date: January 2024 +KernelVersion 6.9 +Contact: Jinlong Mao (QUIC) , Tao Zhang (QUIC) +Description: + (RW) Set/Get the MSR(mux select register) for the CMB subunit + TPDM. diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c index 22966d541230..a9708ab0d488 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.c +++ b/drivers/hwtracing/coresight/coresight-tpdm.c @@ -86,6 +86,11 @@ static ssize_t tpdm_simple_dataset_show(struct device *dev, return -EINVAL; return sysfs_emit(buf, "0x%x\n", drvdata->cmb->patt_mask[tpdm_attr->idx]); + case CMB_MSR: + if (tpdm_attr->idx >= drvdata->cmb_msr_num) + return -EINVAL; + return sysfs_emit(buf, "0x%x\n", + drvdata->cmb->msr[tpdm_attr->idx]); } return -EINVAL; } @@ -162,6 +167,12 @@ static ssize_t tpdm_simple_dataset_store(struct device *dev, ret = size; } break; + case CMB_MSR: + if (tpdm_attr->idx < drvdata->cmb_msr_num) { + drvdata->cmb->msr[tpdm_attr->idx] = val; + ret = size; + } + break; default: break; } @@ -209,6 +220,23 @@ static umode_t tpdm_dsb_msr_is_visible(struct kobject *kobj, return 0; } +static umode_t tpdm_cmb_msr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent); + + struct device_attribute *dev_attr = + container_of(attr, struct device_attribute, attr); + struct tpdm_dataset_attribute *tpdm_attr = + container_of(dev_attr, struct tpdm_dataset_attribute, attr); + + if (tpdm_attr->idx < drvdata->cmb_msr_num) + return attr->mode; + + return 0; +} + static void tpdm_reset_datasets(struct tpdm_drvdata *drvdata) { if (tpdm_has_dsb_dataset(drvdata)) { @@ -347,6 +375,15 @@ static void set_cmb_tier(struct tpdm_drvdata *drvdata) writel_relaxed(val, drvdata->base + TPDM_CMB_TIER); } +static void set_cmb_msr(struct tpdm_drvdata *drvdata) +{ + int i; + + for (i = 0; i < drvdata->cmb_msr_num; i++) + writel_relaxed(drvdata->cmb->msr[i], + drvdata->base + TPDM_CMB_MSR(i)); +} + static void tpdm_enable_cmb(struct tpdm_drvdata *drvdata) { u32 val, i; @@ -367,6 +404,7 @@ static void tpdm_enable_cmb(struct tpdm_drvdata *drvdata) } set_cmb_tier(drvdata); + set_cmb_msr(drvdata); val = readl_relaxed(drvdata->base + TPDM_CMB_CR); /* @@ -1072,6 +1110,42 @@ static struct attribute *tpdm_cmb_patt_attrs[] = { NULL, }; +static struct attribute *tpdm_cmb_msr_attrs[] = { + CMB_MSR_ATTR(0), + CMB_MSR_ATTR(1), + CMB_MSR_ATTR(2), + CMB_MSR_ATTR(3), + CMB_MSR_ATTR(4), + CMB_MSR_ATTR(5), + CMB_MSR_ATTR(6), + CMB_MSR_ATTR(7), + CMB_MSR_ATTR(8), + CMB_MSR_ATTR(9), + CMB_MSR_ATTR(10), + CMB_MSR_ATTR(11), + CMB_MSR_ATTR(12), + CMB_MSR_ATTR(13), + CMB_MSR_ATTR(14), + CMB_MSR_ATTR(15), + CMB_MSR_ATTR(16), + CMB_MSR_ATTR(17), + CMB_MSR_ATTR(18), + CMB_MSR_ATTR(19), + CMB_MSR_ATTR(20), + CMB_MSR_ATTR(21), + CMB_MSR_ATTR(22), + CMB_MSR_ATTR(23), + CMB_MSR_ATTR(24), + CMB_MSR_ATTR(25), + CMB_MSR_ATTR(26), + CMB_MSR_ATTR(27), + CMB_MSR_ATTR(28), + CMB_MSR_ATTR(29), + CMB_MSR_ATTR(30), + CMB_MSR_ATTR(31), + NULL, +}; + static struct attribute *tpdm_dsb_attrs[] = { &dev_attr_dsb_mode.attr, &dev_attr_dsb_trig_ts.attr, @@ -1132,6 +1206,12 @@ static struct attribute_group tpdm_cmb_patt_grp = { .name = "cmb_patt", }; +static struct attribute_group tpdm_cmb_msr_grp = { + .attrs = tpdm_cmb_msr_attrs, + .is_visible = tpdm_cmb_msr_is_visible, + .name = "cmb_msr", +}; + static const struct attribute_group *tpdm_attr_grps[] = { &tpdm_attr_grp, &tpdm_dsb_attr_grp, @@ -1142,6 +1222,7 @@ static const struct attribute_group *tpdm_attr_grps[] = { &tpdm_cmb_attr_grp, &tpdm_cmb_trig_patt_grp, &tpdm_cmb_patt_grp, + &tpdm_cmb_msr_grp, NULL, }; @@ -1180,6 +1261,10 @@ static int tpdm_probe(struct amba_device *adev, const struct amba_id *id) of_property_read_u32(drvdata->dev->of_node, "qcom,dsb-msrs-num", &drvdata->dsb_msr_num); + if (drvdata && tpdm_has_cmb_dataset(drvdata)) + of_property_read_u32(drvdata->dev->of_node, + "qcom,cmb-msrs-num", &drvdata->cmb_msr_num); + /* Set up coresight component description */ desc.name = coresight_alloc_device_name(&tpdm_devs, dev); if (!desc.name) diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index 6d1fe4aed7d0..f3a8f56d0fe7 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -21,6 +21,8 @@ #define TPDM_CMB_XPR(n) (0xA18 + (n * 4)) /* CMB subunit trigger pattern mask registers */ #define TPDM_CMB_XPMR(n) (0xA20 + (n * 4)) +/* CMB MSR register */ +#define TPDM_CMB_MSR(n) (0xA80 + (n * 4)) /* Enable bit for CMB subunit */ #define TPDM_CMB_CR_ENA BIT(0) @@ -36,6 +38,9 @@ /* Patten register number */ #define TPDM_CMB_MAX_PATT 2 +/* MAX number of DSB MSR */ +#define TPDM_CMB_MAX_MSR 32 + /* DSB Subunit Registers */ #define TPDM_DSB_CR (0x780) #define TPDM_DSB_TIER (0x784) @@ -203,6 +208,10 @@ tpdm_patt_enable_ts(enable_ts, \ CMB_PATT) +#define CMB_MSR_ATTR(nr) \ + tpdm_simple_dataset_rw(msr##nr, \ + CMB_MSR, nr) + /** * struct dsb_dataset - specifics associated to dsb dataset * @mode: DSB programming mode @@ -242,6 +251,7 @@ struct dsb_dataset { * @patt_mask: Save value for pattern mask * @trig_patt: Save value for trigger pattern * @trig_patt_mask: Save value for trigger pattern mask + * @msr Save value for MSR * @patt_ts: Indicates if pattern match for timestamp is enabled. * @trig_ts: Indicates if CTI trigger for timestamp is enabled. * @ts_all: Indicates if timestamp is enabled for all packets. @@ -252,6 +262,7 @@ struct cmb_dataset { u32 patt_mask[TPDM_CMB_MAX_PATT]; u32 trig_patt[TPDM_CMB_MAX_PATT]; u32 trig_patt_mask[TPDM_CMB_MAX_PATT]; + u32 msr[TPDM_CMB_MAX_MSR]; bool patt_ts; bool trig_ts; bool ts_all; @@ -268,6 +279,7 @@ struct cmb_dataset { * @dsb Specifics associated to TPDM DSB. * @cmb Specifics associated to TPDM CMB. * @dsb_msr_num Number of MSR supported by DSB TPDM + * @cmb_msr_num Number of MSR supported by CMB TPDM */ struct tpdm_drvdata { @@ -280,6 +292,7 @@ struct tpdm_drvdata { struct dsb_dataset *dsb; struct cmb_dataset *cmb; u32 dsb_msr_num; + u32 cmb_msr_num; }; /* Enumerate members of various datasets */ @@ -294,7 +307,8 @@ enum dataset_mem { CMB_TRIG_PATT, CMB_TRIG_PATT_MASK, CMB_PATT, - CMB_PATT_MASK + CMB_PATT_MASK, + CMB_MSR }; /** -- cgit v1.2.3 From 1bbe0a247e5d72f723daeecf41596bfa99e199f1 Mon Sep 17 00:00:00 2001 From: Mao Jinlong Date: Wed, 31 Jan 2024 02:54:19 -0800 Subject: coresight: etm4x: Set skip_power_up in etm4_init_arch_data function skip_power_up is used in etm4_init_arch_data when set lpoverride. So need to set the value of it before calling using it. Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices") Signed-off-by: Mao Jinlong Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20240131105423.9519-1-quic_jinlmao@quicinc.com --- drivers/hwtracing/coresight/coresight-etm4x-core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c index f087bc8d1da6..c2ca4a02dfce 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c @@ -1196,6 +1196,7 @@ static void etm4_init_arch_data(void *info) struct etm4_init_arg *init_arg = info; struct etmv4_drvdata *drvdata; struct csdev_access *csa; + struct device *dev = init_arg->dev; int i; drvdata = dev_get_drvdata(init_arg->dev); @@ -1209,6 +1210,10 @@ static void etm4_init_arch_data(void *info) if (!etm4_init_csdev_access(drvdata, csa)) return; + if (!csa->io_mem || + fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up")) + drvdata->skip_power_up = true; + /* Detect the support for OS Lock before we actually use it */ etm_detect_os_lock(drvdata, csa); @@ -2036,11 +2041,6 @@ static int etm4_add_coresight_dev(struct etm4_init_arg *init_arg) if (!drvdata->arch) return -EINVAL; - /* TRCPDCR is not accessible with system instructions. */ - if (!desc.access.io_mem || - fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up")) - drvdata->skip_power_up = true; - major = ETM_ARCH_MAJOR_VERSION(drvdata->arch); minor = ETM_ARCH_MINOR_VERSION(drvdata->arch); -- cgit v1.2.3 From c099fdd218a0fedfe87e0b88d2ba0667eab3b3c8 Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Tue, 13 Feb 2024 10:12:46 +0000 Subject: coresight: tpdm: Fix build break due to uninitialised field {CMB/DSB}_PATT_ENABLE_TS attributes do not use an "idx" field and never sets it. But, since have full blown warning enabled in coresight, it triggerst the warning on some of the newer compiler versions: drivers/hwtracing/coresight/coresight-tpdm.c:1055:2: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers] 1055 | DSB_PATT_ENABLE_TS, | ^ drivers/hwtracing/coresight/coresight-tpdm.h:184:3: note: expanded from macro 'DSB_PATT_ENABLE_TS' 184 | tpdm_patt_enable_ts(enable_ts, \ | ^ drivers/hwtracing/coresight/coresight-tpdm.h:156:5: note: expanded from macro 'tpdm_patt_enable_ts' 156 | } \ | ^ drivers/hwtracing/coresight/coresight-tpdm.c:1109:2: error: missing field 'idx' initializer [-Werror,-Wmissing-field-initializers] 1109 | CMB_PATT_ENABLE_TS, | ^ drivers/hwtracing/coresight/coresight-tpdm.h:208:3: note: expanded from macro 'CMB_PATT_ENABLE_TS' 208 | tpdm_patt_enable_ts(enable_ts, \ | ^ drivers/hwtracing/coresight/coresight-tpdm.h:156:5: note: expanded from macro 'tpdm_patt_enable_ts' 156 | } \ | ^ Make sure we initialise this. Fixes: dc6ce57e2aa0 ("coresight-tpdm: Add timestamp control register support for the CMB") Acked-by: Arnd Bergmann Reported-by: Arnd Bergmann Cc: Tao Zhang Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-tpdm.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h index f3a8f56d0fe7..e08d212642e3 100644 --- a/drivers/hwtracing/coresight/coresight-tpdm.h +++ b/drivers/hwtracing/coresight/coresight-tpdm.h @@ -153,6 +153,7 @@ __ATTR(name, 0644, enable_ts_show, \ enable_ts_store), \ mem, \ + 0, \ } \ })[0].attr.attr) -- cgit v1.2.3 From 680ce1d3a3dc63234406231c1f7c40e4f8ed0878 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 20 Jan 2024 21:50:05 -0800 Subject: iio: dummy_evgen: remove Excess kernel-doc comments Drop kernel-doc comments for struct fields that were removed to prevent kernel-doc warnings: iio_dummy_evgen.c:43: warning: Excess struct member 'irq_sim' description in 'iio_dummy_eventgen' iio_dummy_evgen.c:43: warning: Excess struct member 'base' description in 'iio_dummy_eventgen' Fixes: 337cbeb2c13e ("genirq/irq_sim: Simplify the API") Signed-off-by: Randy Dunlap Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20240121055005.20042-1-rdunlap@infradead.org Signed-off-by: Jonathan Cameron --- drivers/iio/dummy/iio_dummy_evgen.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/dummy/iio_dummy_evgen.c b/drivers/iio/dummy/iio_dummy_evgen.c index 5a0072727ba4..16d3f144dda0 100644 --- a/drivers/iio/dummy/iio_dummy_evgen.c +++ b/drivers/iio/dummy/iio_dummy_evgen.c @@ -31,8 +31,6 @@ * @regs: irq regs we are faking * @lock: protect the evgen state * @inuse: mask of which irqs are connected - * @irq_sim: interrupt simulator - * @base: base of irq range * @irq_sim_domain: irq simulator domain */ struct iio_dummy_eventgen { -- cgit v1.2.3 From 689c0953b97724d802608f604b19d557277ef05a Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Wed, 17 Jan 2024 14:10:50 +0100 Subject: iio: imu: adis16475: make use of irq_get_trigger_type() There's no need to call both irq_get_irq_data() and irqd_get_trigger_type() as we already have an helper for that. This allows for code simplification. Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240117-adis-improv-v1-2-7f90e9fad200@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis16475.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index 64be656f0b80..01f55cc902fa 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -1363,22 +1363,16 @@ static int adis16475_config_sync_mode(struct adis16475 *st) static int adis16475_config_irq_pin(struct adis16475 *st) { int ret; - struct irq_data *desc; u32 irq_type; u16 val = 0; u8 polarity; struct spi_device *spi = st->adis.spi; - desc = irq_get_irq_data(spi->irq); - if (!desc) { - dev_err(&spi->dev, "Could not find IRQ %d\n", spi->irq); - return -EINVAL; - } /* * It is possible to configure the data ready polarity. Furthermore, we * need to update the adis struct if we want data ready as active low. */ - irq_type = irqd_get_trigger_type(desc); + irq_type = irq_get_trigger_type(spi->irq); if (irq_type == IRQ_TYPE_EDGE_RISING) { polarity = 1; st->adis.irq_flag = IRQF_TRIGGER_RISING; -- cgit v1.2.3 From 32f28e19ff27a1292351f579f44086dfea82c131 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Wed, 17 Jan 2024 14:10:51 +0100 Subject: iio: imu: adis16480: make use of irq_get_trigger_type() There's no need to call both irq_get_irq_data() and irqd_get_trigger_type() as we already have an helper for that. This allows for code simplification. Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240117-adis-improv-v1-3-7f90e9fad200@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis16480.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c index fe520194a837..b40a55bba30c 100644 --- a/drivers/iio/imu/adis16480.c +++ b/drivers/iio/imu/adis16480.c @@ -1246,18 +1246,11 @@ static int adis16480_config_irq_pin(struct adis16480 *st) { struct device *dev = &st->adis.spi->dev; struct fwnode_handle *fwnode = dev_fwnode(dev); - struct irq_data *desc; enum adis16480_int_pin pin; unsigned int irq_type; uint16_t val; int i, irq = 0; - desc = irq_get_irq_data(st->adis.spi->irq); - if (!desc) { - dev_err(dev, "Could not find IRQ %d\n", irq); - return -EINVAL; - } - /* Disable data ready since the default after reset is on */ val = ADIS16480_DRDY_EN(0); @@ -1285,7 +1278,7 @@ static int adis16480_config_irq_pin(struct adis16480 *st) * configured as positive or negative, corresponding to * IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING respectively. */ - irq_type = irqd_get_trigger_type(desc); + irq_type = irq_get_trigger_type(st->adis.spi->irq); if (irq_type == IRQ_TYPE_EDGE_RISING) { /* Default */ val |= ADIS16480_DRDY_POL(1); } else if (irq_type == IRQ_TYPE_EDGE_FALLING) { -- cgit v1.2.3 From 1ca53b5df113bd008f5fd7ecdf108872f1cf7508 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Wed, 17 Jan 2024 13:41:04 +0100 Subject: iio: adc: ad_sigma_delta: allow overwriting the IRQ flags Make sure we can specify the IRQ trigger type from firmware and drivers won't ignore it. In fact, this how it should be done but since someone might be already depending on the driver to hardcode the trigger type (and not specifying it in firmware), let's do it like this so there's no possible breakage. Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240117-dev_sigma_delta_no_irq_flags-v1-2-db39261592cf@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad_sigma_delta.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c index 7e2192870743..fbba3f4a1189 100644 --- a/drivers/iio/adc/ad_sigma_delta.c +++ b/drivers/iio/adc/ad_sigma_delta.c @@ -568,6 +568,7 @@ EXPORT_SYMBOL_NS_GPL(ad_sd_validate_trigger, IIO_AD_SIGMA_DELTA); static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_dev) { struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev); + unsigned long irq_flags = irq_get_trigger_type(sigma_delta->spi->irq); int ret; if (dev != &sigma_delta->spi->dev) { @@ -588,9 +589,13 @@ static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_de /* the IRQ core clears IRQ_DISABLE_UNLAZY flag when freeing an IRQ */ irq_set_status_flags(sigma_delta->spi->irq, IRQ_DISABLE_UNLAZY); + /* Allow overwriting the flags from firmware */ + if (!irq_flags) + irq_flags = sigma_delta->info->irq_flags; + ret = devm_request_irq(dev, sigma_delta->spi->irq, ad_sd_data_rdy_trig_poll, - sigma_delta->info->irq_flags | IRQF_NO_AUTOEN, + irq_flags | IRQF_NO_AUTOEN, indio_dev->name, sigma_delta); if (ret) -- cgit v1.2.3 From 44b90383453c6664b119ec985e70f87c90e050f1 Mon Sep 17 00:00:00 2001 From: Mårten Lindahl Date: Mon, 15 Jan 2024 12:44:36 +0100 Subject: iio: light: vcnl4000: Set ps high definition for 4040/4200 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The vcnl4040/vcnl4200 proximity sensor defaults to 12 bit data resolution, but the chip also supports 16 bit data resolution, which is called proximity high definition (PS_HD). Make the vcnl4040/vcnl4200 proximity sensor use the high definition for all data readings. Please note that in order to preserve the 12 bit integer part of the in_proximity_raw output, the format is changed from integer to fixed point. Signed-off-by: Mårten Lindahl Link: https://lore.kernel.org/r/20231221-vcnl4000-ps-hd-v3-1-6dcc889372be@axis.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/vcnl4000.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c index fdf763a04b0b..4e3641ff2ed4 100644 --- a/drivers/iio/light/vcnl4000.c +++ b/drivers/iio/light/vcnl4000.c @@ -90,6 +90,7 @@ #define VCNL4040_PS_CONF1_PS_SHUTDOWN BIT(0) #define VCNL4040_PS_CONF2_PS_IT GENMASK(3, 1) /* Proximity integration time */ #define VCNL4040_CONF1_PS_PERS GENMASK(5, 4) /* Proximity interrupt persistence setting */ +#define VCNL4040_PS_CONF2_PS_HD BIT(11) /* Proximity high definition */ #define VCNL4040_PS_CONF2_PS_INT GENMASK(9, 8) /* Proximity interrupt mode */ #define VCNL4040_PS_CONF3_MPS GENMASK(6, 5) /* Proximity multi pulse number */ #define VCNL4040_PS_MS_LED_I GENMASK(10, 8) /* Proximity current */ @@ -114,6 +115,13 @@ #define VCNL4010_INT_DRDY \ (BIT(VCNL4010_INT_PROXIMITY) | BIT(VCNL4010_INT_ALS)) +#define VCNL4040_CONF3_PS_MPS_16BITS 3 /* 8 multi pulses */ +#define VCNL4040_CONF3_PS_LED_I_16BITS 3 /* 120 mA */ + +#define VCNL4040_CONF3_PS_SAMPLE_16BITS \ + (FIELD_PREP(VCNL4040_PS_CONF3_MPS, VCNL4040_CONF3_PS_MPS_16BITS) | \ + FIELD_PREP(VCNL4040_PS_MS_LED_I, VCNL4040_CONF3_PS_LED_I_16BITS)) + static const int vcnl4010_prox_sampling_frequency[][2] = { {1, 950000}, {3, 906250}, @@ -195,6 +203,7 @@ struct vcnl4000_data { enum vcnl4000_device_ids id; int rev; int al_scale; + int ps_scale; u8 ps_int; /* proximity interrupt mode */ u8 als_int; /* ambient light interrupt mode*/ const struct vcnl4000_chip_spec *chip_spec; @@ -345,6 +354,7 @@ static int vcnl4200_set_power_state(struct vcnl4000_data *data, bool on) static int vcnl4200_init(struct vcnl4000_data *data) { int ret, id; + u16 regval; ret = i2c_smbus_read_word_data(data->client, VCNL4200_DEV_ID); if (ret < 0) @@ -386,9 +396,32 @@ static int vcnl4200_init(struct vcnl4000_data *data) break; } data->al_scale = data->chip_spec->ulux_step; + data->ps_scale = 16; mutex_init(&data->vcnl4200_al.lock); mutex_init(&data->vcnl4200_ps.lock); + /* Use 16 bits proximity sensor readings */ + ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1); + if (ret < 0) + return ret; + + regval = ret | VCNL4040_PS_CONF2_PS_HD; + ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, + regval); + if (ret < 0) + return ret; + + /* Align proximity sensor sample rate to 16 bits data width */ + ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF3); + if (ret < 0) + return ret; + + regval = ret | VCNL4040_CONF3_PS_SAMPLE_16BITS; + ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF3, + regval); + if (ret < 0) + return ret; + ret = data->chip_spec->set_power_state(data, true); if (ret < 0) return ret; @@ -901,8 +934,9 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev, break; case IIO_PROXIMITY: ret = data->chip_spec->measure_proximity(data, val); + *val2 = data->ps_scale; if (!ret) - ret = IIO_VAL_INT; + ret = IIO_VAL_FRACTIONAL; break; default: ret = -EINVAL; -- cgit v1.2.3 From cf996f039679e6ebb9eefce28afe465482f4fc3a Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Mon, 15 Jan 2024 16:26:07 +0200 Subject: iio: test: test gain-time-scale helpers Some light sensors can adjust both the HW-gain and integration time. There are cases where adjusting the integration time has similar impact to the scale of the reported values as gain setting has. IIO users do typically expect to handle scale by a single writable 'scale' entry. Driver should then adjust the gain/time accordingly. It however is difficult for a driver to know whether it should change gain or integration time to meet the requested scale. Usually it is preferred to have longer integration time which usually improves accuracy, but there may be use-cases where long measurement times can be an issue. Thus it can be preferable to allow also changing the integration time - but mitigate the scale impact by also changing the gain underneath. Eg, if integration time change doubles the measured values, the driver can reduce the HW-gain to half. The theory of the computations of gain-time-scale is simple. However, some people (undersigned) got that implemented wrong for more than once. Hence some gain-time-scale helpers were introduced. Add some simple tests to verify the most hairy functions. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/0f7505b43f91394dc3bb636369489c897b7e01a7.1705328293.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/test/Kconfig | 14 ++ drivers/iio/test/Makefile | 1 + drivers/iio/test/iio-test-gts.c | 513 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 528 insertions(+) create mode 100644 drivers/iio/test/iio-test-gts.c (limited to 'drivers') diff --git a/drivers/iio/test/Kconfig b/drivers/iio/test/Kconfig index 0b6e4e278a2f..33cca49c8058 100644 --- a/drivers/iio/test/Kconfig +++ b/drivers/iio/test/Kconfig @@ -4,6 +4,20 @@ # # Keep in alphabetical order +config IIO_GTS_KUNIT_TEST + tristate "Test IIO formatting functions" if !KUNIT_ALL_TESTS + depends on KUNIT + select IIO_GTS_HELPER + select TEST_KUNIT_DEVICE_HELPERS + default KUNIT_ALL_TESTS + help + build unit tests for the IIO light sensor gain-time-scale helpers. + + For more information on KUnit and unit tests in general, please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. Keep in alphabetical order + config IIO_RESCALE_KUNIT_TEST tristate "Test IIO rescale conversion functions" if !KUNIT_ALL_TESTS depends on KUNIT && IIO_RESCALE diff --git a/drivers/iio/test/Makefile b/drivers/iio/test/Makefile index d76eaf36da82..e9a4cf1ff57f 100644 --- a/drivers/iio/test/Makefile +++ b/drivers/iio/test/Makefile @@ -6,4 +6,5 @@ # Keep in alphabetical order obj-$(CONFIG_IIO_RESCALE_KUNIT_TEST) += iio-test-rescale.o obj-$(CONFIG_IIO_FORMAT_KUNIT_TEST) += iio-test-format.o +obj-$(CONFIG_IIO_GTS_KUNIT_TEST) += iio-test-gts.o CFLAGS_iio-test-format.o += $(DISABLE_STRUCTLEAK_PLUGIN) diff --git a/drivers/iio/test/iio-test-gts.c b/drivers/iio/test/iio-test-gts.c new file mode 100644 index 000000000000..cf7ab773ea0b --- /dev/null +++ b/drivers/iio/test/iio-test-gts.c @@ -0,0 +1,513 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Unit tests for IIO light sensor gain-time-scale helpers + * + * Copyright (c) 2023 Matti Vaittinen + */ + +#include +#include +#include +#include +#include + +/* + * Please, read the "rant" from the top of the lib/test_linear_ranges.c if + * you see a line of helper code which is not being tested. + * + * Then, please look at the line which is not being tested. Is this line + * somehow unusually complex? If answer is "no", then chances are that the + * "development inertia" caused by adding a test exceeds the benefits. + * + * If yes, then adding a test is probably a good idea but please stop for a + * moment and consider the effort of changing all the tests when code gets + * refactored. Eventually it neeeds to be. + */ + +#define TEST_TSEL_50 1 +#define TEST_TSEL_X_MIN TEST_TSEL_50 +#define TEST_TSEL_100 0 +#define TEST_TSEL_200 2 +#define TEST_TSEL_400 4 +#define TEST_TSEL_X_MAX TEST_TSEL_400 + +#define TEST_GSEL_1 0x00 +#define TEST_GSEL_X_MIN TEST_GSEL_1 +#define TEST_GSEL_4 0x08 +#define TEST_GSEL_16 0x0a +#define TEST_GSEL_32 0x0b +#define TEST_GSEL_64 0x0c +#define TEST_GSEL_256 0x18 +#define TEST_GSEL_512 0x19 +#define TEST_GSEL_1024 0x1a +#define TEST_GSEL_2048 0x1b +#define TEST_GSEL_4096 0x1c +#define TEST_GSEL_X_MAX TEST_GSEL_4096 + +#define TEST_SCALE_1X 64 +#define TEST_SCALE_MIN_X TEST_SCALE_1X +#define TEST_SCALE_2X 32 +#define TEST_SCALE_4X 16 +#define TEST_SCALE_8X 8 +#define TEST_SCALE_16X 4 +#define TEST_SCALE_32X 2 +#define TEST_SCALE_64X 1 + +#define TEST_SCALE_NANO_128X 500000000 +#define TEST_SCALE_NANO_256X 250000000 +#define TEST_SCALE_NANO_512X 125000000 +#define TEST_SCALE_NANO_1024X 62500000 +#define TEST_SCALE_NANO_2048X 31250000 +#define TEST_SCALE_NANO_4096X 15625000 +#define TEST_SCALE_NANO_4096X2 7812500 +#define TEST_SCALE_NANO_4096X4 3906250 +#define TEST_SCALE_NANO_4096X8 1953125 + +#define TEST_SCALE_NANO_MAX_X TEST_SCALE_NANO_4096X8 + +/* + * Can't have this allocated from stack because the kunit clean-up will + * happen only after the test function has already gone + */ +static struct iio_gts gts; + +static const struct iio_gain_sel_pair gts_test_gains[] = { + GAIN_SCALE_GAIN(1, TEST_GSEL_1), + GAIN_SCALE_GAIN(4, TEST_GSEL_4), + GAIN_SCALE_GAIN(16, TEST_GSEL_16), + GAIN_SCALE_GAIN(32, TEST_GSEL_32), + GAIN_SCALE_GAIN(64, TEST_GSEL_64), + GAIN_SCALE_GAIN(256, TEST_GSEL_256), + GAIN_SCALE_GAIN(512, TEST_GSEL_512), + GAIN_SCALE_GAIN(1024, TEST_GSEL_1024), + GAIN_SCALE_GAIN(2048, TEST_GSEL_2048), + GAIN_SCALE_GAIN(4096, TEST_GSEL_4096), +#define HWGAIN_MAX 4096 +}; + +static const struct iio_itime_sel_mul gts_test_itimes[] = { + GAIN_SCALE_ITIME_US(400 * 1000, TEST_TSEL_400, 8), + GAIN_SCALE_ITIME_US(200 * 1000, TEST_TSEL_200, 4), + GAIN_SCALE_ITIME_US(100 * 1000, TEST_TSEL_100, 2), + GAIN_SCALE_ITIME_US(50 * 1000, TEST_TSEL_50, 1), +#define TIMEGAIN_MAX 8 +}; +#define TOTAL_GAIN_MAX (HWGAIN_MAX * TIMEGAIN_MAX) +#define IIO_GTS_TEST_DEV "iio-gts-test-dev" + +static struct device *__test_init_iio_gain_scale(struct kunit *test, + struct iio_gts *gts, const struct iio_gain_sel_pair *g_table, + int num_g, const struct iio_itime_sel_mul *i_table, int num_i) +{ + struct device *dev; + int ret; + + dev = kunit_device_register(test, IIO_GTS_TEST_DEV); + + KUNIT_EXPECT_NOT_ERR_OR_NULL(test, dev); + if (IS_ERR_OR_NULL(dev)) + return NULL; + + ret = devm_iio_init_iio_gts(dev, TEST_SCALE_1X, 0, g_table, num_g, + i_table, num_i, gts); + KUNIT_EXPECT_EQ(test, 0, ret); + if (ret) + return NULL; + + return dev; +} + +#define test_init_iio_gain_scale(test, gts) \ + __test_init_iio_gain_scale(test, gts, gts_test_gains, \ + ARRAY_SIZE(gts_test_gains), gts_test_itimes, \ + ARRAY_SIZE(gts_test_itimes)) + +static void test_init_iio_gts_invalid(struct kunit *test) +{ + struct device *dev; + int ret; + const struct iio_itime_sel_mul itimes_neg[] = { + GAIN_SCALE_ITIME_US(-10, TEST_TSEL_400, 8), + GAIN_SCALE_ITIME_US(200 * 1000, TEST_TSEL_200, 4), + }; + const struct iio_gain_sel_pair gains_neg[] = { + GAIN_SCALE_GAIN(1, TEST_GSEL_1), + GAIN_SCALE_GAIN(2, TEST_GSEL_4), + GAIN_SCALE_GAIN(-2, TEST_GSEL_16), + }; + /* 55555 * 38656 = 2147534080 => overflows 32bit int */ + const struct iio_itime_sel_mul itimes_overflow[] = { + GAIN_SCALE_ITIME_US(400 * 1000, TEST_TSEL_400, 55555), + GAIN_SCALE_ITIME_US(200 * 1000, TEST_TSEL_200, 4), + }; + const struct iio_gain_sel_pair gains_overflow[] = { + GAIN_SCALE_GAIN(1, TEST_GSEL_1), + GAIN_SCALE_GAIN(2, TEST_GSEL_4), + GAIN_SCALE_GAIN(38656, TEST_GSEL_16), + }; + + dev = kunit_device_register(test, IIO_GTS_TEST_DEV); + KUNIT_EXPECT_NOT_ERR_OR_NULL(test, dev); + if (!dev) + return; + + /* Ok gains, negative time */ + ret = devm_iio_init_iio_gts(dev, TEST_SCALE_1X, 0, gts_test_gains, + ARRAY_SIZE(gts_test_gains), itimes_neg, + ARRAY_SIZE(itimes_neg), >s); + KUNIT_EXPECT_EQ(test, -EINVAL, ret); + + /* Ok times, negative gain */ + ret = devm_iio_init_iio_gts(dev, TEST_SCALE_1X, 0, gains_neg, + ARRAY_SIZE(gains_neg), gts_test_itimes, + ARRAY_SIZE(gts_test_itimes), >s); + KUNIT_EXPECT_EQ(test, -EINVAL, ret); + + /* gain * time overflow int */ + ret = devm_iio_init_iio_gts(dev, TEST_SCALE_1X, 0, gains_overflow, + ARRAY_SIZE(gains_overflow), itimes_overflow, + ARRAY_SIZE(itimes_overflow), >s); + KUNIT_EXPECT_EQ(test, -EOVERFLOW, ret); +} + +static void test_iio_gts_find_gain_for_scale_using_time(struct kunit *test) +{ + struct device *dev; + int ret, gain_sel; + + dev = test_init_iio_gain_scale(test, >s); + if (!dev) + return; + + ret = iio_gts_find_gain_sel_for_scale_using_time(>s, TEST_TSEL_100, + TEST_SCALE_8X, 0, &gain_sel); + /* + * Meas time 100 => gain by time 2x + * TEST_SCALE_8X matches total gain 8x + * => required HWGAIN 4x + */ + KUNIT_EXPECT_EQ(test, 0, ret); + KUNIT_EXPECT_EQ(test, TEST_GSEL_4, gain_sel); + + ret = iio_gts_find_gain_sel_for_scale_using_time(>s, TEST_TSEL_200, 0, + TEST_SCALE_NANO_256X, &gain_sel); + /* + * Meas time 200 => gain by time 4x + * TEST_SCALE_256X matches total gain 256x + * => required HWGAIN 256/4 => 64x + */ + KUNIT_EXPECT_EQ(test, 0, ret); + KUNIT_EXPECT_EQ(test, TEST_GSEL_64, gain_sel); + + /* Min time, Min gain */ + ret = iio_gts_find_gain_sel_for_scale_using_time(>s, TEST_TSEL_X_MIN, + TEST_SCALE_MIN_X, 0, &gain_sel); + KUNIT_EXPECT_EQ(test, 0, ret); + KUNIT_EXPECT_EQ(test, TEST_GSEL_1, gain_sel); + + /* Max time, Max gain */ + ret = iio_gts_find_gain_sel_for_scale_using_time(>s, TEST_TSEL_X_MAX, + 0, TEST_SCALE_NANO_MAX_X, &gain_sel); + KUNIT_EXPECT_EQ(test, 0, ret); + KUNIT_EXPECT_EQ(test, TEST_GSEL_4096, gain_sel); + + ret = iio_gts_find_gain_sel_for_scale_using_time(>s, TEST_TSEL_100, 0, + TEST_SCALE_NANO_256X, &gain_sel); + /* + * Meas time 100 => gain by time 2x + * TEST_SCALE_256X matches total gain 256x + * => required HWGAIN 256/2 => 128x (not in gain-table - unsupported) + */ + KUNIT_EXPECT_NE(test, 0, ret); + + ret = iio_gts_find_gain_sel_for_scale_using_time(>s, TEST_TSEL_200, 0, + TEST_SCALE_NANO_MAX_X, &gain_sel); + /* We can't reach the max gain with integration time smaller than MAX */ + KUNIT_EXPECT_NE(test, 0, ret); + + ret = iio_gts_find_gain_sel_for_scale_using_time(>s, TEST_TSEL_50, 0, + TEST_SCALE_NANO_MAX_X, &gain_sel); + /* We can't reach the max gain with integration time smaller than MAX */ + KUNIT_EXPECT_NE(test, 0, ret); +} + +static void test_iio_gts_find_new_gain_sel_by_old_gain_time(struct kunit *test) +{ + struct device *dev; + int ret, old_gain, new_gain, old_time_sel, new_time_sel; + + dev = test_init_iio_gain_scale(test, >s); + if (!dev) + return; + + old_gain = 32; + old_time_sel = TEST_TSEL_200; + new_time_sel = TEST_TSEL_400; + + ret = iio_gts_find_new_gain_sel_by_old_gain_time(>s, old_gain, + old_time_sel, new_time_sel, &new_gain); + KUNIT_EXPECT_EQ(test, 0, ret); + /* + * Doubling the integration time doubles the total gain - so old + * (hw)gain must be divided by two to compensate. => 32 / 2 => 16 + */ + KUNIT_EXPECT_EQ(test, 16, new_gain); + + old_gain = 4; + old_time_sel = TEST_TSEL_50; + new_time_sel = TEST_TSEL_200; + ret = iio_gts_find_new_gain_sel_by_old_gain_time(>s, old_gain, + old_time_sel, new_time_sel, &new_gain); + KUNIT_EXPECT_EQ(test, 0, ret); + /* + * gain by time 1x => 4x - (hw)gain 4x => 1x + */ + KUNIT_EXPECT_EQ(test, 1, new_gain); + + old_gain = 512; + old_time_sel = TEST_TSEL_400; + new_time_sel = TEST_TSEL_50; + ret = iio_gts_find_new_gain_sel_by_old_gain_time(>s, old_gain, + old_time_sel, new_time_sel, &new_gain); + KUNIT_EXPECT_EQ(test, 0, ret); + /* + * gain by time 8x => 1x - (hw)gain 512x => 4096x) + */ + KUNIT_EXPECT_EQ(test, 4096, new_gain); + + /* Unsupported gain 2x */ + old_gain = 4; + old_time_sel = TEST_TSEL_200; + new_time_sel = TEST_TSEL_400; + ret = iio_gts_find_new_gain_sel_by_old_gain_time(>s, old_gain, + old_time_sel, new_time_sel, &new_gain); + KUNIT_EXPECT_NE(test, 0, ret); + + /* Too small gain */ + old_gain = 4; + old_time_sel = TEST_TSEL_50; + new_time_sel = TEST_TSEL_400; + ret = iio_gts_find_new_gain_sel_by_old_gain_time(>s, old_gain, + old_time_sel, new_time_sel, &new_gain); + KUNIT_EXPECT_NE(test, 0, ret); + + /* Too big gain */ + old_gain = 1024; + old_time_sel = TEST_TSEL_400; + new_time_sel = TEST_TSEL_50; + ret = iio_gts_find_new_gain_sel_by_old_gain_time(>s, old_gain, + old_time_sel, new_time_sel, &new_gain); + KUNIT_EXPECT_NE(test, 0, ret); + +} + +static void test_iio_find_closest_gain_low(struct kunit *test) +{ + struct device *dev; + bool in_range; + int ret; + + const struct iio_gain_sel_pair gts_test_gains_gain_low[] = { + GAIN_SCALE_GAIN(4, TEST_GSEL_4), + GAIN_SCALE_GAIN(16, TEST_GSEL_16), + GAIN_SCALE_GAIN(32, TEST_GSEL_32), + }; + + dev = test_init_iio_gain_scale(test, >s); + if (!dev) + return; + + ret = iio_find_closest_gain_low(>s, 2, &in_range); + KUNIT_EXPECT_EQ(test, 1, ret); + KUNIT_EXPECT_EQ(test, true, in_range); + + ret = iio_find_closest_gain_low(>s, 1, &in_range); + KUNIT_EXPECT_EQ(test, 1, ret); + KUNIT_EXPECT_EQ(test, true, in_range); + + ret = iio_find_closest_gain_low(>s, 4095, &in_range); + KUNIT_EXPECT_EQ(test, 2048, ret); + KUNIT_EXPECT_EQ(test, true, in_range); + + ret = iio_find_closest_gain_low(>s, 4097, &in_range); + KUNIT_EXPECT_EQ(test, 4096, ret); + KUNIT_EXPECT_EQ(test, false, in_range); + + kunit_device_unregister(test, dev); + + dev = __test_init_iio_gain_scale(test, >s, gts_test_gains_gain_low, + ARRAY_SIZE(gts_test_gains_gain_low), + gts_test_itimes, ARRAY_SIZE(gts_test_itimes)); + if (!dev) + return; + + ret = iio_find_closest_gain_low(>s, 3, &in_range); + KUNIT_EXPECT_EQ(test, -EINVAL, ret); + KUNIT_EXPECT_EQ(test, false, in_range); +} + +static void test_iio_gts_total_gain_to_scale(struct kunit *test) +{ + struct device *dev; + int ret, scale_int, scale_nano; + + dev = test_init_iio_gain_scale(test, >s); + if (!dev) + return; + + ret = iio_gts_total_gain_to_scale(>s, 1, &scale_int, &scale_nano); + KUNIT_EXPECT_EQ(test, 0, ret); + KUNIT_EXPECT_EQ(test, TEST_SCALE_1X, scale_int); + KUNIT_EXPECT_EQ(test, 0, scale_nano); + + ret = iio_gts_total_gain_to_scale(>s, 1, &scale_int, &scale_nano); + KUNIT_EXPECT_EQ(test, 0, ret); + KUNIT_EXPECT_EQ(test, TEST_SCALE_1X, scale_int); + KUNIT_EXPECT_EQ(test, 0, scale_nano); + + ret = iio_gts_total_gain_to_scale(>s, 4096 * 8, &scale_int, + &scale_nano); + KUNIT_EXPECT_EQ(test, 0, ret); + KUNIT_EXPECT_EQ(test, 0, scale_int); + KUNIT_EXPECT_EQ(test, TEST_SCALE_NANO_4096X8, scale_nano); +} + +static void test_iio_gts_chk_times(struct kunit *test, const int *vals) +{ + static const int expected[] = {0, 50000, 0, 100000, 0, 200000, 0, 400000}; + int i; + + for (i = 0; i < ARRAY_SIZE(expected); i++) + KUNIT_EXPECT_EQ(test, expected[i], vals[i]); +} + +static void test_iio_gts_chk_scales_all(struct kunit *test, struct iio_gts *gts, + const int *vals, int len) +{ + static const int gains[] = {1, 2, 4, 8, 16, 32, 64, 128, 256, 512, + 1024, 2048, 4096, 4096 * 2, 4096 * 4, + 4096 * 8}; + int expected[ARRAY_SIZE(gains) * 2]; + int i, ret; + int exp_len = ARRAY_SIZE(gains) * 2; + + KUNIT_EXPECT_EQ(test, exp_len, len); + if (len != exp_len) + return; + + for (i = 0; i < ARRAY_SIZE(gains); i++) { + ret = iio_gts_total_gain_to_scale(gts, gains[i], + &expected[2 * i], + &expected[2 * i + 1]); + KUNIT_EXPECT_EQ(test, 0, ret); + if (ret) + return; + } + + for (i = 0; i < ARRAY_SIZE(expected); i++) + KUNIT_EXPECT_EQ(test, expected[i], vals[i]); +} + +static void test_iio_gts_chk_scales_t200(struct kunit *test, struct iio_gts *gts, + const int *vals, int len) +{ + /* The gain caused by time 200 is 4x */ + static const int gains[] = { + 1 * 4, + 4 * 4, + 16 * 4, + 32 * 4, + 64 * 4, + 256 * 4, + 512 * 4, + 1024 * 4, + 2048 * 4, + 4096 * 4 + }; + int expected[ARRAY_SIZE(gains) * 2]; + int i, ret; + + KUNIT_EXPECT_EQ(test, 2 * ARRAY_SIZE(gains), len); + if (len < 2 * ARRAY_SIZE(gains)) + return; + + for (i = 0; i < ARRAY_SIZE(gains); i++) { + ret = iio_gts_total_gain_to_scale(gts, gains[i], + &expected[2 * i], + &expected[2 * i + 1]); + KUNIT_EXPECT_EQ(test, 0, ret); + if (ret) + return; + } + + for (i = 0; i < ARRAY_SIZE(expected); i++) + KUNIT_EXPECT_EQ(test, expected[i], vals[i]); +} + +static void test_iio_gts_avail_test(struct kunit *test) +{ + struct device *dev; + int ret; + int type, len; + const int *vals; + + dev = test_init_iio_gain_scale(test, >s); + if (!dev) + return; + + /* test table building for times and iio_gts_avail_times() */ + ret = iio_gts_avail_times(>s, &vals, &type, &len); + KUNIT_EXPECT_EQ(test, IIO_AVAIL_LIST, ret); + if (ret) + return; + + KUNIT_EXPECT_EQ(test, IIO_VAL_INT_PLUS_MICRO, type); + KUNIT_EXPECT_EQ(test, 8, len); + if (len < 8) + return; + + test_iio_gts_chk_times(test, vals); + + /* Test table building for all scales and iio_gts_all_avail_scales() */ + ret = iio_gts_all_avail_scales(>s, &vals, &type, &len); + KUNIT_EXPECT_EQ(test, IIO_AVAIL_LIST, ret); + if (ret) + return; + + KUNIT_EXPECT_EQ(test, IIO_VAL_INT_PLUS_NANO, type); + + test_iio_gts_chk_scales_all(test, >s, vals, len); + + /* + * Test table building for scales/time and + * iio_gts_avail_scales_for_time() + */ + ret = iio_gts_avail_scales_for_time(>s, 200000, &vals, &type, &len); + KUNIT_EXPECT_EQ(test, IIO_AVAIL_LIST, ret); + if (ret) + return; + + KUNIT_EXPECT_EQ(test, IIO_VAL_INT_PLUS_NANO, type); + test_iio_gts_chk_scales_t200(test, >s, vals, len); +} + +static struct kunit_case iio_gts_test_cases[] = { + KUNIT_CASE(test_init_iio_gts_invalid), + KUNIT_CASE(test_iio_gts_find_gain_for_scale_using_time), + KUNIT_CASE(test_iio_gts_find_new_gain_sel_by_old_gain_time), + KUNIT_CASE(test_iio_find_closest_gain_low), + KUNIT_CASE(test_iio_gts_total_gain_to_scale), + KUNIT_CASE(test_iio_gts_avail_test), + {} +}; + +static struct kunit_suite iio_gts_test_suite = { + .name = "iio-gain-time-scale", + .test_cases = iio_gts_test_cases, +}; + +kunit_test_suite(iio_gts_test_suite); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Matti Vaittinen "); +MODULE_DESCRIPTION("Test IIO light sensor gain-time-scale helpers"); +MODULE_IMPORT_NS(IIO_GTS_HELPER); -- cgit v1.2.3 From eeb4c24a5c909be376675963767fbcd36072fc6a Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Tue, 23 Jan 2024 08:09:15 -0600 Subject: iio: health: afe4403: Use devm action helper for regulator disable Use a device lifecycle managed action for regulator disable function. This helps prevent mistakes like unregistering out of order in cleanup functions and forgetting to unregister on error paths. Signed-off-by: Andrew Davis Link: https://lore.kernel.org/r/20240123140918.215818-1-afd@ti.com Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4403.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c index df3bc5c3d378..9e9d6de2a7c8 100644 --- a/drivers/iio/health/afe4403.c +++ b/drivers/iio/health/afe4403.c @@ -346,6 +346,13 @@ err: return IRQ_HANDLED; } +static void afe4403_regulator_disable(void *data) +{ + struct regulator *regulator = data; + + regulator_disable(regulator); +} + #define AFE4403_TIMING_PAIRS \ { AFE440X_LED2STC, 0x000050 }, \ { AFE440X_LED2ENDC, 0x0003e7 }, \ @@ -495,19 +502,24 @@ static int afe4403_probe(struct spi_device *spi) dev_err(afe->dev, "Unable to enable regulator\n"); return ret; } + ret = devm_add_action_or_reset(afe->dev, afe4403_regulator_disable, afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to add regulator disable action\n"); + return ret; + } ret = regmap_write(afe->regmap, AFE440X_CONTROL0, AFE440X_CONTROL0_SW_RESET); if (ret) { dev_err(afe->dev, "Unable to reset device\n"); - goto err_disable_reg; + return ret; } ret = regmap_multi_reg_write(afe->regmap, afe4403_reg_sequences, ARRAY_SIZE(afe4403_reg_sequences)); if (ret) { dev_err(afe->dev, "Unable to set register defaults\n"); - goto err_disable_reg; + return ret; } indio_dev->modes = INDIO_DIRECT_MODE; @@ -523,8 +535,7 @@ static int afe4403_probe(struct spi_device *spi) iio_device_id(indio_dev)); if (!afe->trig) { dev_err(afe->dev, "Unable to allocate IIO trigger\n"); - ret = -ENOMEM; - goto err_disable_reg; + return -ENOMEM; } iio_trigger_set_drvdata(afe->trig, indio_dev); @@ -532,7 +543,7 @@ static int afe4403_probe(struct spi_device *spi) ret = iio_trigger_register(afe->trig); if (ret) { dev_err(afe->dev, "Unable to register IIO trigger\n"); - goto err_disable_reg; + return ret; } ret = devm_request_threaded_irq(afe->dev, afe->irq, @@ -566,8 +577,6 @@ err_buff: err_trig: if (afe->irq > 0) iio_trigger_unregister(afe->trig); -err_disable_reg: - regulator_disable(afe->regulator); return ret; } @@ -584,10 +593,6 @@ static void afe4403_remove(struct spi_device *spi) if (afe->irq > 0) iio_trigger_unregister(afe->trig); - - ret = regulator_disable(afe->regulator); - if (ret) - dev_warn(afe->dev, "Unable to disable regulator\n"); } static const struct spi_device_id afe4403_ids[] = { -- cgit v1.2.3 From e73a640fe3149cfa4677cefa34247350e322b563 Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Tue, 23 Jan 2024 08:09:16 -0600 Subject: iio: health: afe4403: Use devm IIO helpers Use a device lifecycle managed IIO helper functions. This helps prevent mistakes like unregistering and freeing out of order in cleanup functions and forgetting to unregister and free on error paths. Signed-off-by: Andrew Davis Link: https://lore.kernel.org/r/20240123140918.215818-2-afd@ti.com Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4403.c | 38 ++++++++------------------------------ 1 file changed, 8 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c index 9e9d6de2a7c8..1dbe48dae74e 100644 --- a/drivers/iio/health/afe4403.c +++ b/drivers/iio/health/afe4403.c @@ -540,7 +540,7 @@ static int afe4403_probe(struct spi_device *spi) iio_trigger_set_drvdata(afe->trig, indio_dev); - ret = iio_trigger_register(afe->trig); + ret = devm_iio_trigger_register(afe->dev, afe->trig); if (ret) { dev_err(afe->dev, "Unable to register IIO trigger\n"); return ret; @@ -553,46 +553,25 @@ static int afe4403_probe(struct spi_device *spi) afe->trig); if (ret) { dev_err(afe->dev, "Unable to request IRQ\n"); - goto err_trig; + return ret; } } - ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, - afe4403_trigger_handler, NULL); + ret = devm_iio_triggered_buffer_setup(afe->dev, indio_dev, + &iio_pollfunc_store_time, + afe4403_trigger_handler, NULL); if (ret) { dev_err(afe->dev, "Unable to setup buffer\n"); - goto err_trig; + return ret; } - ret = iio_device_register(indio_dev); + ret = devm_iio_device_register(afe->dev, indio_dev); if (ret) { dev_err(afe->dev, "Unable to register IIO device\n"); - goto err_buff; + return ret; } return 0; - -err_buff: - iio_triggered_buffer_cleanup(indio_dev); -err_trig: - if (afe->irq > 0) - iio_trigger_unregister(afe->trig); - - return ret; -} - -static void afe4403_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct afe4403_data *afe = iio_priv(indio_dev); - int ret; - - iio_device_unregister(indio_dev); - - iio_triggered_buffer_cleanup(indio_dev); - - if (afe->irq > 0) - iio_trigger_unregister(afe->trig); } static const struct spi_device_id afe4403_ids[] = { @@ -608,7 +587,6 @@ static struct spi_driver afe4403_spi_driver = { .pm = pm_sleep_ptr(&afe4403_pm_ops), }, .probe = afe4403_probe, - .remove = afe4403_remove, .id_table = afe4403_ids, }; module_spi_driver(afe4403_spi_driver); -- cgit v1.2.3 From 5ff7ea503cd40776b741a33de762cc3f71c3fc1a Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Tue, 23 Jan 2024 08:09:17 -0600 Subject: iio: health: afe4404: Use devm action helper for regulator disable Use a device lifecycle managed action for regulator disable function. This helps prevent mistakes like unregistering out of order in cleanup functions and forgetting to unregister on error paths. Signed-off-by: Andrew Davis Link: https://lore.kernel.org/r/20240123140918.215818-3-afd@ti.com Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4404.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c index ede1e8201311..75a513a92242 100644 --- a/drivers/iio/health/afe4404.c +++ b/drivers/iio/health/afe4404.c @@ -349,6 +349,13 @@ err: return IRQ_HANDLED; } +static void afe4404_regulator_disable(void *data) +{ + struct regulator *regulator = data; + + regulator_disable(regulator); +} + /* Default timings from data-sheet */ #define AFE4404_TIMING_PAIRS \ { AFE440X_PRPCOUNT, 39999 }, \ @@ -502,19 +509,24 @@ static int afe4404_probe(struct i2c_client *client) dev_err(afe->dev, "Unable to enable regulator\n"); return ret; } + ret = devm_add_action_or_reset(afe->dev, afe4404_regulator_disable, afe->regulator); + if (ret) { + dev_err(afe->dev, "Unable to enable regulator\n"); + return ret; + } ret = regmap_write(afe->regmap, AFE440X_CONTROL0, AFE440X_CONTROL0_SW_RESET); if (ret) { dev_err(afe->dev, "Unable to reset device\n"); - goto disable_reg; + return ret; } ret = regmap_multi_reg_write(afe->regmap, afe4404_reg_sequences, ARRAY_SIZE(afe4404_reg_sequences)); if (ret) { dev_err(afe->dev, "Unable to set register defaults\n"); - goto disable_reg; + return ret; } indio_dev->modes = INDIO_DIRECT_MODE; @@ -530,8 +542,7 @@ static int afe4404_probe(struct i2c_client *client) iio_device_id(indio_dev)); if (!afe->trig) { dev_err(afe->dev, "Unable to allocate IIO trigger\n"); - ret = -ENOMEM; - goto disable_reg; + return -ENOMEM; } iio_trigger_set_drvdata(afe->trig, indio_dev); @@ -539,7 +550,7 @@ static int afe4404_probe(struct i2c_client *client) ret = iio_trigger_register(afe->trig); if (ret) { dev_err(afe->dev, "Unable to register IIO trigger\n"); - goto disable_reg; + return ret; } ret = devm_request_threaded_irq(afe->dev, afe->irq, @@ -549,7 +560,7 @@ static int afe4404_probe(struct i2c_client *client) afe->trig); if (ret) { dev_err(afe->dev, "Unable to request IRQ\n"); - goto disable_reg; + return ret; } } @@ -573,8 +584,6 @@ unregister_triggered_buffer: unregister_trigger: if (afe->irq > 0) iio_trigger_unregister(afe->trig); -disable_reg: - regulator_disable(afe->regulator); return ret; } @@ -591,10 +600,6 @@ static void afe4404_remove(struct i2c_client *client) if (afe->irq > 0) iio_trigger_unregister(afe->trig); - - ret = regulator_disable(afe->regulator); - if (ret) - dev_err(afe->dev, "Unable to disable regulator\n"); } static const struct i2c_device_id afe4404_ids[] = { -- cgit v1.2.3 From 044b432392f827f39c1523bc67a62209d2d7760e Mon Sep 17 00:00:00 2001 From: Andrew Davis Date: Tue, 23 Jan 2024 08:09:18 -0600 Subject: iio: health: afe4404: Use devm IIO helpers Use a device lifecycle managed IIO helper functions. This helps prevent mistakes like unregistering and freeing out of order in cleanup functions and forgetting to unregister and free on error paths. Signed-off-by: Andrew Davis Link: https://lore.kernel.org/r/20240123140918.215818-4-afd@ti.com Signed-off-by: Jonathan Cameron --- drivers/iio/health/afe4404.c | 36 +++++++----------------------------- 1 file changed, 7 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c index 75a513a92242..7768b07ef7a6 100644 --- a/drivers/iio/health/afe4404.c +++ b/drivers/iio/health/afe4404.c @@ -547,7 +547,7 @@ static int afe4404_probe(struct i2c_client *client) iio_trigger_set_drvdata(afe->trig, indio_dev); - ret = iio_trigger_register(afe->trig); + ret = devm_iio_trigger_register(afe->dev, afe->trig); if (ret) { dev_err(afe->dev, "Unable to register IIO trigger\n"); return ret; @@ -564,42 +564,21 @@ static int afe4404_probe(struct i2c_client *client) } } - ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, - afe4404_trigger_handler, NULL); + ret = devm_iio_triggered_buffer_setup(afe->dev, indio_dev, + &iio_pollfunc_store_time, + afe4404_trigger_handler, NULL); if (ret) { dev_err(afe->dev, "Unable to setup buffer\n"); - goto unregister_trigger; + return ret; } - ret = iio_device_register(indio_dev); + ret = devm_iio_device_register(afe->dev, indio_dev); if (ret) { dev_err(afe->dev, "Unable to register IIO device\n"); - goto unregister_triggered_buffer; + return ret; } return 0; - -unregister_triggered_buffer: - iio_triggered_buffer_cleanup(indio_dev); -unregister_trigger: - if (afe->irq > 0) - iio_trigger_unregister(afe->trig); - - return ret; -} - -static void afe4404_remove(struct i2c_client *client) -{ - struct iio_dev *indio_dev = i2c_get_clientdata(client); - struct afe4404_data *afe = iio_priv(indio_dev); - int ret; - - iio_device_unregister(indio_dev); - - iio_triggered_buffer_cleanup(indio_dev); - - if (afe->irq > 0) - iio_trigger_unregister(afe->trig); } static const struct i2c_device_id afe4404_ids[] = { @@ -615,7 +594,6 @@ static struct i2c_driver afe4404_i2c_driver = { .pm = pm_sleep_ptr(&afe4404_pm_ops), }, .probe = afe4404_probe, - .remove = afe4404_remove, .id_table = afe4404_ids, }; module_i2c_driver(afe4404_i2c_driver); -- cgit v1.2.3 From 5659785a329edaca710ada74e62ce2c24cce6cfa Mon Sep 17 00:00:00 2001 From: Kim Seer Paller Date: Tue, 23 Jan 2024 16:10:59 +0800 Subject: iio: frequency: admfm2000: New driver Dual microwave down converter module with input RF and LO frequency ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down conversion path. Signed-off-by: Kim Seer Paller Link: https://lore.kernel.org/r/20240123081059.5746-2-kimseer.paller@analog.com Signed-off-by: Jonathan Cameron --- MAINTAINERS | 1 + drivers/iio/frequency/Kconfig | 10 ++ drivers/iio/frequency/Makefile | 1 + drivers/iio/frequency/admfm2000.c | 282 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 294 insertions(+) create mode 100644 drivers/iio/frequency/admfm2000.c (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index e650f65996c0..bc1e236f2184 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1273,6 +1273,7 @@ L: linux-iio@vger.kernel.org S: Supported W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml +F: drivers/iio/frequency/admfm2000.c ANALOG DEVICES INC ADMV1013 DRIVER M: Antoniu Miclaus diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig index 9e85dfa58508..c455be7d4a1c 100644 --- a/drivers/iio/frequency/Kconfig +++ b/drivers/iio/frequency/Kconfig @@ -60,6 +60,16 @@ config ADF4377 To compile this driver as a module, choose M here: the module will be called adf4377. +config ADMFM2000 + tristate "Analog Devices ADMFM2000 Dual Microwave Down Converter" + depends on GPIOLIB + help + Say yes here to build support for Analog Devices ADMFM2000 Dual + Microwave Down Converter. + + To compile this driver as a module, choose M here: the + module will be called admfm2000. + config ADMV1013 tristate "Analog Devices ADMV1013 Microwave Upconverter" depends on SPI && COMMON_CLK diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile index b616c29b4a08..70d0e0b70e80 100644 --- a/drivers/iio/frequency/Makefile +++ b/drivers/iio/frequency/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_AD9523) += ad9523.o obj-$(CONFIG_ADF4350) += adf4350.o obj-$(CONFIG_ADF4371) += adf4371.o obj-$(CONFIG_ADF4377) += adf4377.o +obj-$(CONFIG_ADMFM2000) += admfm2000.o obj-$(CONFIG_ADMV1013) += admv1013.o obj-$(CONFIG_ADMV1014) += admv1014.o obj-$(CONFIG_ADMV4420) += admv4420.o diff --git a/drivers/iio/frequency/admfm2000.c b/drivers/iio/frequency/admfm2000.c new file mode 100644 index 000000000000..c34d79e55a7c --- /dev/null +++ b/drivers/iio/frequency/admfm2000.c @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ADMFM2000 Dual Microwave Down Converter + * + * Copyright 2024 Analog Devices Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ADMFM2000_MIXER_MODE 0 +#define ADMFM2000_DIRECT_IF_MODE 1 +#define ADMFM2000_DSA_GPIOS 5 +#define ADMFM2000_MODE_GPIOS 2 +#define ADMFM2000_MAX_GAIN 0 +#define ADMFM2000_MIN_GAIN -31000 +#define ADMFM2000_DEFAULT_GAIN -0x20 + +struct admfm2000_state { + struct mutex lock; /* protect sensor state */ + struct gpio_desc *sw1_ch[2]; + struct gpio_desc *sw2_ch[2]; + struct gpio_desc *dsa1_gpios[5]; + struct gpio_desc *dsa2_gpios[5]; + u32 gain[2]; +}; + +static int admfm2000_mode(struct iio_dev *indio_dev, u32 chan, u32 mode) +{ + struct admfm2000_state *st = iio_priv(indio_dev); + int i; + + switch (mode) { + case ADMFM2000_MIXER_MODE: + for (i = 0; i < ADMFM2000_MODE_GPIOS; i++) { + gpiod_set_value_cansleep(st->sw1_ch[i], (chan == 0) ? 1 : 0); + gpiod_set_value_cansleep(st->sw2_ch[i], (chan == 0) ? 0 : 1); + } + return 0; + case ADMFM2000_DIRECT_IF_MODE: + for (i = 0; i < ADMFM2000_MODE_GPIOS; i++) { + gpiod_set_value_cansleep(st->sw1_ch[i], (chan == 0) ? 0 : 1); + gpiod_set_value_cansleep(st->sw2_ch[i], (chan == 0) ? 1 : 0); + } + return 0; + default: + return -EINVAL; + } +} + +static int admfm2000_attenuation(struct iio_dev *indio_dev, u32 chan, u32 value) +{ + struct admfm2000_state *st = iio_priv(indio_dev); + int i; + + switch (chan) { + case 0: + for (i = 0; i < ADMFM2000_DSA_GPIOS; i++) + gpiod_set_value_cansleep(st->dsa1_gpios[i], value & (1 << i)); + return 0; + case 1: + for (i = 0; i < ADMFM2000_DSA_GPIOS; i++) + gpiod_set_value_cansleep(st->dsa2_gpios[i], value & (1 << i)); + return 0; + default: + return -EINVAL; + } +} + +static int admfm2000_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct admfm2000_state *st = iio_priv(indio_dev); + int gain; + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + mutex_lock(&st->lock); + gain = ~(st->gain[chan->channel]) * -1000; + *val = gain / 1000; + *val2 = (gain % 1000) * 1000; + mutex_unlock(&st->lock); + + return IIO_VAL_INT_PLUS_MICRO_DB; + default: + return -EINVAL; + } +} + +static int admfm2000_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct admfm2000_state *st = iio_priv(indio_dev); + int gain, ret; + + if (val < 0) + gain = (val * 1000) - (val2 / 1000); + else + gain = (val * 1000) + (val2 / 1000); + + if (gain > ADMFM2000_MAX_GAIN || gain < ADMFM2000_MIN_GAIN) + return -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + mutex_lock(&st->lock); + st->gain[chan->channel] = ~((abs(gain) / 1000) & 0x1F); + + ret = admfm2000_attenuation(indio_dev, chan->channel, + st->gain[chan->channel]); + mutex_unlock(&st->lock); + return ret; + default: + return -EINVAL; + } +} + +static int admfm2000_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_HARDWAREGAIN: + return IIO_VAL_INT_PLUS_MICRO_DB; + default: + return -EINVAL; + } +} + +static const struct iio_info admfm2000_info = { + .read_raw = &admfm2000_read_raw, + .write_raw = &admfm2000_write_raw, + .write_raw_get_fmt = &admfm2000_write_raw_get_fmt, +}; + +#define ADMFM2000_CHAN(_channel) { \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .indexed = 1, \ + .channel = _channel, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ +} + +static const struct iio_chan_spec admfm2000_channels[] = { + ADMFM2000_CHAN(0), + ADMFM2000_CHAN(1), +}; + +static int admfm2000_channel_config(struct admfm2000_state *st, + struct iio_dev *indio_dev) +{ + struct platform_device *pdev = to_platform_device(indio_dev->dev.parent); + struct device *dev = &pdev->dev; + struct fwnode_handle *child; + struct gpio_desc **dsa; + struct gpio_desc **sw; + int ret, i; + bool mode; + u32 reg; + + device_for_each_child_node(dev, child) { + ret = fwnode_property_read_u32(child, "reg", ®); + if (ret) { + fwnode_handle_put(child); + return dev_err_probe(dev, ret, + "Failed to get reg property\n"); + } + + if (reg >= indio_dev->num_channels) { + fwnode_handle_put(child); + return dev_err_probe(dev, -EINVAL, "reg bigger than: %d\n", + indio_dev->num_channels); + } + + if (fwnode_property_present(child, "adi,mixer-mode")) + mode = ADMFM2000_MIXER_MODE; + else + mode = ADMFM2000_DIRECT_IF_MODE; + + switch (reg) { + case 0: + sw = st->sw1_ch; + dsa = st->dsa1_gpios; + break; + case 1: + sw = st->sw2_ch; + dsa = st->dsa2_gpios; + break; + default: + fwnode_handle_put(child); + return -EINVAL; + } + + for (i = 0; i < ADMFM2000_MODE_GPIOS; i++) { + sw[i] = devm_fwnode_gpiod_get_index(dev, child, "switch", + i, GPIOD_OUT_LOW, NULL); + if (IS_ERR(sw[i])) { + fwnode_handle_put(child); + return dev_err_probe(dev, PTR_ERR(sw[i]), + "Failed to get gpios\n"); + } + } + + for (i = 0; i < ADMFM2000_DSA_GPIOS; i++) { + dsa[i] = devm_fwnode_gpiod_get_index(dev, child, + "attenuation", i, + GPIOD_OUT_LOW, NULL); + if (IS_ERR(dsa[i])) { + fwnode_handle_put(child); + return dev_err_probe(dev, PTR_ERR(dsa[i]), + "Failed to get gpios\n"); + } + } + + ret = admfm2000_mode(indio_dev, reg, mode); + if (ret) { + fwnode_handle_put(child); + return ret; + } + } + + return 0; +} + +static int admfm2000_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct admfm2000_state *st; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + + indio_dev->name = "admfm2000"; + indio_dev->num_channels = ARRAY_SIZE(admfm2000_channels); + indio_dev->channels = admfm2000_channels; + indio_dev->info = &admfm2000_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + st->gain[0] = ADMFM2000_DEFAULT_GAIN; + st->gain[1] = ADMFM2000_DEFAULT_GAIN; + + mutex_init(&st->lock); + + ret = admfm2000_channel_config(st, indio_dev); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id admfm2000_of_match[] = { + { .compatible = "adi,admfm2000" }, + { } +}; +MODULE_DEVICE_TABLE(of, admfm2000_of_match); + +static struct platform_driver admfm2000_driver = { + .driver = { + .name = "admfm2000", + .of_match_table = admfm2000_of_match, + }, + .probe = admfm2000_probe, +}; +module_platform_driver(admfm2000_driver); + +MODULE_AUTHOR("Kim Seer Paller "); +MODULE_DESCRIPTION("ADMFM2000 Dual Microwave Down Converter"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From c8f883a78fa27c3bff3130b1abb37902a1fd3563 Mon Sep 17 00:00:00 2001 From: Nikita Mikhailevich Date: Thu, 1 Feb 2024 16:18:48 +0100 Subject: iio: accel: mxc4005: new ACPI ID for the MXC6655 accelerometer New ID was introduced by Chuwi on Minibook X 2023. Signed-off-by: Nikita Mikhailevich Link: https://lore.kernel.org/r/20240201151848.1666245-1-ermyril@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/accel/mxc4005.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/accel/mxc4005.c b/drivers/iio/accel/mxc4005.c index 8118cc13614a..61839be501c2 100644 --- a/drivers/iio/accel/mxc4005.c +++ b/drivers/iio/accel/mxc4005.c @@ -472,6 +472,7 @@ static int mxc4005_probe(struct i2c_client *client) static const struct acpi_device_id mxc4005_acpi_match[] = { {"MXC4005", 0}, {"MXC6655", 0}, + {"MDA6655", 0}, { }, }; MODULE_DEVICE_TABLE(acpi, mxc4005_acpi_match); -- cgit v1.2.3 From f7b6443f347dd5fdbee15a15f457db83f1426328 Mon Sep 17 00:00:00 2001 From: Justin Stitt Date: Thu, 1 Feb 2024 18:55:03 +0000 Subject: iio: sx9324: avoid copying property strings We're doing some needless string copies when trying to assign the proper `prop` string. We can make `prop` a const char* and simply assign to string literals. For the case where a format string is used, let's extract the parsing logic out into sx9324_parse_phase_prop(). We no longer need to create copies or allocate new memory. sx9324_parse_phase_prop() will simply return the default def value if it fails. This also cleans up some deprecated strncpy() uses [1]. Furthermore, let's clean up this code further by removing some unused defines: | #define SX9324_PIN_DEF "semtech,ph0-pin" | #define SX9324_RESOLUTION_DEF "semtech,ph01-resolution" | #define SX9324_PROXRAW_DEF "semtech,ph01-proxraw-strength" Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20240201-strncpy-drivers-iio-proximity-sx9324-c-v5-1-78dde23553bc@google.com Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/sx9324.c | 69 ++++++++++++++++++++++++------------------ 1 file changed, 40 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c index ac2ed2da21cc..b0403fc7906b 100644 --- a/drivers/iio/proximity/sx9324.c +++ b/drivers/iio/proximity/sx9324.c @@ -873,6 +873,29 @@ static int sx9324_init_compensation(struct iio_dev *indio_dev) 20000, 2000000); } +static u8 sx9324_parse_phase_prop(struct device *dev, + struct sx_common_reg_default *reg_def, + const char *prop) +{ + unsigned int pin_defs[SX9324_NUM_PINS]; + int count, ret, pin; + u32 raw = 0; + + count = device_property_count_u32(dev, prop); + if (count != ARRAY_SIZE(pin_defs)) + return reg_def->def; + ret = device_property_read_u32_array(dev, prop, pin_defs, + ARRAY_SIZE(pin_defs)); + if (ret) + return reg_def->def; + + for (pin = 0; pin < SX9324_NUM_PINS; pin++) + raw |= (pin_defs[pin] << (2 * pin)) & + SX9324_REG_AFE_PH0_PIN_MASK(pin); + + return raw; +} + static const struct sx_common_reg_default * sx9324_get_default_reg(struct device *dev, int idx, struct sx_common_reg_default *reg_def) @@ -881,37 +904,29 @@ sx9324_get_default_reg(struct device *dev, int idx, "highest" }; static const char * const sx9324_csidle[] = { "hi-z", "hi-z", "gnd", "vdd" }; -#define SX9324_PIN_DEF "semtech,ph0-pin" -#define SX9324_RESOLUTION_DEF "semtech,ph01-resolution" -#define SX9324_PROXRAW_DEF "semtech,ph01-proxraw-strength" - unsigned int pin_defs[SX9324_NUM_PINS]; - char prop[] = SX9324_PROXRAW_DEF; u32 start = 0, raw = 0, pos = 0; - int ret, count, ph, pin; + const char *prop; + int ret; memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def)); sx_common_get_raw_register_config(dev, reg_def); switch (reg_def->reg) { case SX9324_REG_AFE_PH0: + reg_def->def = sx9324_parse_phase_prop(dev, reg_def, + "semtech,ph0-pin"); + break; case SX9324_REG_AFE_PH1: + reg_def->def = sx9324_parse_phase_prop(dev, reg_def, + "semtech,ph1-pin"); + break; case SX9324_REG_AFE_PH2: + reg_def->def = sx9324_parse_phase_prop(dev, reg_def, + "semtech,ph2-pin"); + break; case SX9324_REG_AFE_PH3: - ph = reg_def->reg - SX9324_REG_AFE_PH0; - snprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph); - - count = device_property_count_u32(dev, prop); - if (count != ARRAY_SIZE(pin_defs)) - break; - ret = device_property_read_u32_array(dev, prop, pin_defs, - ARRAY_SIZE(pin_defs)); - if (ret) - break; - - for (pin = 0; pin < SX9324_NUM_PINS; pin++) - raw |= (pin_defs[pin] << (2 * pin)) & - SX9324_REG_AFE_PH0_PIN_MASK(pin); - reg_def->def = raw; + reg_def->def = sx9324_parse_phase_prop(dev, reg_def, + "semtech,ph3-pin"); break; case SX9324_REG_AFE_CTRL0: ret = device_property_match_property_string(dev, "semtech,cs-idle-sleep", @@ -933,11 +948,9 @@ sx9324_get_default_reg(struct device *dev, int idx, case SX9324_REG_AFE_CTRL4: case SX9324_REG_AFE_CTRL7: if (reg_def->reg == SX9324_REG_AFE_CTRL4) - strncpy(prop, "semtech,ph01-resolution", - ARRAY_SIZE(prop)); + prop = "semtech,ph01-resolution"; else - strncpy(prop, "semtech,ph23-resolution", - ARRAY_SIZE(prop)); + prop = "semtech,ph23-resolution"; ret = device_property_read_u32(dev, prop, &raw); if (ret) @@ -1008,11 +1021,9 @@ sx9324_get_default_reg(struct device *dev, int idx, case SX9324_REG_PROX_CTRL0: case SX9324_REG_PROX_CTRL1: if (reg_def->reg == SX9324_REG_PROX_CTRL0) - strncpy(prop, "semtech,ph01-proxraw-strength", - ARRAY_SIZE(prop)); + prop = "semtech,ph01-proxraw-strength"; else - strncpy(prop, "semtech,ph23-proxraw-strength", - ARRAY_SIZE(prop)); + prop = "semtech,ph23-proxraw-strength"; ret = device_property_read_u32(dev, prop, &raw); if (ret) break; -- cgit v1.2.3 From 366328e5ac47a763d77b9dd85172d3eb3735568e Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:29 +0000 Subject: iio: dummy: Use automatic lock and direct mode cleanup. Given we now have iio_device_claim_direct_scoped() to perform automatic releasing of direct mode at exit from the scope that follows it, this can be used in conjunction with guard(mutex) etc remove a lot of special case handling. Note that in this particular example code, there is no real reason you can't read channels via sysfs at the same time as filling the software buffer. To make it look more like a real driver constrain raw and processed channel reads from occurring whilst the buffer is in use. Reviewed-by: David Lechner Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-3-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/dummy/iio_simple_dummy.c | 185 +++++++++++++++++------------------ 1 file changed, 89 insertions(+), 96 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/dummy/iio_simple_dummy.c b/drivers/iio/dummy/iio_simple_dummy.c index c24f609c2ade..09efacaf8f78 100644 --- a/drivers/iio/dummy/iio_simple_dummy.c +++ b/drivers/iio/dummy/iio_simple_dummy.c @@ -283,65 +283,63 @@ static int iio_dummy_read_raw(struct iio_dev *indio_dev, long mask) { struct iio_dummy_state *st = iio_priv(indio_dev); - int ret = -EINVAL; - mutex_lock(&st->lock); switch (mask) { case IIO_CHAN_INFO_RAW: /* magic value - channel value read */ - switch (chan->type) { - case IIO_VOLTAGE: - if (chan->output) { - /* Set integer part to cached value */ - *val = st->dac_val; - ret = IIO_VAL_INT; - } else if (chan->differential) { - if (chan->channel == 1) - *val = st->differential_adc_val[0]; - else - *val = st->differential_adc_val[1]; - ret = IIO_VAL_INT; - } else { - *val = st->single_ended_adc_val; - ret = IIO_VAL_INT; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + guard(mutex)(&st->lock); + switch (chan->type) { + case IIO_VOLTAGE: + if (chan->output) { + /* Set integer part to cached value */ + *val = st->dac_val; + return IIO_VAL_INT; + } else if (chan->differential) { + if (chan->channel == 1) + *val = st->differential_adc_val[0]; + else + *val = st->differential_adc_val[1]; + return IIO_VAL_INT; + } else { + *val = st->single_ended_adc_val; + return IIO_VAL_INT; + } + + case IIO_ACCEL: + *val = st->accel_val; + return IIO_VAL_INT; + default: + return -EINVAL; } - break; - case IIO_ACCEL: - *val = st->accel_val; - ret = IIO_VAL_INT; - break; - default: - break; } - break; + unreachable(); case IIO_CHAN_INFO_PROCESSED: - switch (chan->type) { - case IIO_STEPS: - *val = st->steps; - ret = IIO_VAL_INT; - break; - case IIO_ACTIVITY: - switch (chan->channel2) { - case IIO_MOD_RUNNING: - *val = st->activity_running; - ret = IIO_VAL_INT; - break; - case IIO_MOD_WALKING: - *val = st->activity_walking; - ret = IIO_VAL_INT; - break; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + guard(mutex)(&st->lock); + switch (chan->type) { + case IIO_STEPS: + *val = st->steps; + return IIO_VAL_INT; + case IIO_ACTIVITY: + switch (chan->channel2) { + case IIO_MOD_RUNNING: + *val = st->activity_running; + return IIO_VAL_INT; + case IIO_MOD_WALKING: + *val = st->activity_walking; + return IIO_VAL_INT; + default: + return -EINVAL; + } default: - break; + return -EINVAL; } - break; - default: - break; } - break; + unreachable(); case IIO_CHAN_INFO_OFFSET: /* only single ended adc -> 7 */ *val = 7; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_VOLTAGE: @@ -350,60 +348,57 @@ static int iio_dummy_read_raw(struct iio_dev *indio_dev, /* only single ended adc -> 0.001333 */ *val = 0; *val2 = 1333; - ret = IIO_VAL_INT_PLUS_MICRO; - break; + return IIO_VAL_INT_PLUS_MICRO; case 1: /* all differential adc -> 0.000001344 */ *val = 0; *val2 = 1344; - ret = IIO_VAL_INT_PLUS_NANO; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; } - break; default: - break; + return -EINVAL; } - break; - case IIO_CHAN_INFO_CALIBBIAS: + case IIO_CHAN_INFO_CALIBBIAS: { + guard(mutex)(&st->lock); /* only the acceleration axis - read from cache */ *val = st->accel_calibbias; - ret = IIO_VAL_INT; - break; - case IIO_CHAN_INFO_CALIBSCALE: + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_CALIBSCALE: { + guard(mutex)(&st->lock); *val = st->accel_calibscale->val; *val2 = st->accel_calibscale->val2; - ret = IIO_VAL_INT_PLUS_MICRO; - break; + return IIO_VAL_INT_PLUS_MICRO; + } case IIO_CHAN_INFO_SAMP_FREQ: *val = 3; *val2 = 33; - ret = IIO_VAL_INT_PLUS_NANO; - break; - case IIO_CHAN_INFO_ENABLE: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_ENABLE: { + guard(mutex)(&st->lock); switch (chan->type) { case IIO_STEPS: *val = st->steps_enabled; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; default: - break; + return -EINVAL; } - break; - case IIO_CHAN_INFO_CALIBHEIGHT: + } + case IIO_CHAN_INFO_CALIBHEIGHT: { + guard(mutex)(&st->lock); switch (chan->type) { case IIO_STEPS: *val = st->height; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; default: - break; + return -EINVAL; } - break; - + } default: - break; + return -EINVAL; } - mutex_unlock(&st->lock); - return ret; } /** @@ -426,7 +421,6 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev, long mask) { int i; - int ret = 0; struct iio_dummy_state *st = iio_priv(indio_dev); switch (mask) { @@ -436,10 +430,10 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev, if (chan->output == 0) return -EINVAL; - /* Locking not required as writing single value */ - mutex_lock(&st->lock); - st->dac_val = val; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) { + /* Locking not required as writing single value */ + st->dac_val = val; + } return 0; default: return -EINVAL; @@ -447,9 +441,9 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_STEPS: - mutex_lock(&st->lock); - st->steps = val; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) { + st->steps = val; + } return 0; case IIO_ACTIVITY: if (val < 0) @@ -470,30 +464,29 @@ static int iio_dummy_write_raw(struct iio_dev *indio_dev, default: return -EINVAL; } - case IIO_CHAN_INFO_CALIBSCALE: - mutex_lock(&st->lock); + case IIO_CHAN_INFO_CALIBSCALE: { + guard(mutex)(&st->lock); /* Compare against table - hard matching here */ for (i = 0; i < ARRAY_SIZE(dummy_scales); i++) if (val == dummy_scales[i].val && val2 == dummy_scales[i].val2) break; if (i == ARRAY_SIZE(dummy_scales)) - ret = -EINVAL; - else - st->accel_calibscale = &dummy_scales[i]; - mutex_unlock(&st->lock); - return ret; + return -EINVAL; + st->accel_calibscale = &dummy_scales[i]; + return 0; + } case IIO_CHAN_INFO_CALIBBIAS: - mutex_lock(&st->lock); - st->accel_calibbias = val; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) { + st->accel_calibbias = val; + } return 0; case IIO_CHAN_INFO_ENABLE: switch (chan->type) { case IIO_STEPS: - mutex_lock(&st->lock); - st->steps_enabled = val; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) { + st->steps_enabled = val; + } return 0; default: return -EINVAL; -- cgit v1.2.3 From eabc6b08476f18de5e0d7fc02aa92f4896f2fc63 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:30 +0000 Subject: iio: accel: adxl367: Use automated cleanup for locks and iio direct mode. Switching to the iio_device_claim_direct_scoped() for state and to guard() based unlocking of mutexes simplifies error handling by allowing direct returns when an error is encountered. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-4-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/adxl367.c | 297 ++++++++++++++++++-------------------------- 1 file changed, 118 insertions(+), 179 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/adxl367.c b/drivers/iio/accel/adxl367.c index 90b7ae6d42b7..834ee6d63947 100644 --- a/drivers/iio/accel/adxl367.c +++ b/drivers/iio/accel/adxl367.c @@ -339,22 +339,17 @@ static int adxl367_set_act_threshold(struct adxl367_state *st, { int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = adxl367_set_measure_en(st, false); if (ret) - goto out; + return ret; ret = _adxl367_set_act_threshold(st, act, threshold); if (ret) - goto out; - - ret = adxl367_set_measure_en(st, true); - -out: - mutex_unlock(&st->lock); + return ret; - return ret; + return adxl367_set_measure_en(st, true); } static int adxl367_set_act_proc_mode(struct adxl367_state *st, @@ -482,51 +477,45 @@ static int adxl367_set_fifo_watermark(struct adxl367_state *st, static int adxl367_set_range(struct iio_dev *indio_dev, enum adxl367_range range) { - struct adxl367_state *st = iio_priv(indio_dev); - int ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + struct adxl367_state *st = iio_priv(indio_dev); + int ret; - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - mutex_lock(&st->lock); - - ret = adxl367_set_measure_en(st, false); - if (ret) - goto out; + guard(mutex)(&st->lock); - ret = regmap_update_bits(st->regmap, ADXL367_REG_FILTER_CTL, - ADXL367_FILTER_CTL_RANGE_MASK, - FIELD_PREP(ADXL367_FILTER_CTL_RANGE_MASK, - range)); - if (ret) - goto out; + ret = adxl367_set_measure_en(st, false); + if (ret) + return ret; - adxl367_scale_act_thresholds(st, st->range, range); + ret = regmap_update_bits(st->regmap, ADXL367_REG_FILTER_CTL, + ADXL367_FILTER_CTL_RANGE_MASK, + FIELD_PREP(ADXL367_FILTER_CTL_RANGE_MASK, + range)); + if (ret) + return ret; - /* Activity thresholds depend on range */ - ret = _adxl367_set_act_threshold(st, ADXL367_ACTIVITY, - st->act_threshold); - if (ret) - goto out; + adxl367_scale_act_thresholds(st, st->range, range); - ret = _adxl367_set_act_threshold(st, ADXL367_INACTIVITY, - st->inact_threshold); - if (ret) - goto out; - - ret = adxl367_set_measure_en(st, true); - if (ret) - goto out; + /* Activity thresholds depend on range */ + ret = _adxl367_set_act_threshold(st, ADXL367_ACTIVITY, + st->act_threshold); + if (ret) + return ret; - st->range = range; + ret = _adxl367_set_act_threshold(st, ADXL367_INACTIVITY, + st->inact_threshold); + if (ret) + return ret; -out: - mutex_unlock(&st->lock); + ret = adxl367_set_measure_en(st, true); + if (ret) + return ret; - iio_device_release_direct_mode(indio_dev); + st->range = range; - return ret; + return 0; + } + unreachable(); } static int adxl367_time_ms_to_samples(struct adxl367_state *st, unsigned int ms) @@ -587,11 +576,11 @@ static int adxl367_set_act_time_ms(struct adxl367_state *st, { int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = adxl367_set_measure_en(st, false); if (ret) - goto out; + return ret; if (act == ADXL367_ACTIVITY) ret = _adxl367_set_act_time_ms(st, ms); @@ -599,14 +588,9 @@ static int adxl367_set_act_time_ms(struct adxl367_state *st, ret = _adxl367_set_inact_time_ms(st, ms); if (ret) - goto out; - - ret = adxl367_set_measure_en(st, true); - -out: - mutex_unlock(&st->lock); + return ret; - return ret; + return adxl367_set_measure_en(st, true); } static int _adxl367_set_odr(struct adxl367_state *st, enum adxl367_odr odr) @@ -636,31 +620,23 @@ static int _adxl367_set_odr(struct adxl367_state *st, enum adxl367_odr odr) static int adxl367_set_odr(struct iio_dev *indio_dev, enum adxl367_odr odr) { - struct adxl367_state *st = iio_priv(indio_dev); - int ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + struct adxl367_state *st = iio_priv(indio_dev);; + int ret; - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; + guard(mutex)(&st->lock); - mutex_lock(&st->lock); - - ret = adxl367_set_measure_en(st, false); - if (ret) - goto out; - - ret = _adxl367_set_odr(st, odr); - if (ret) - goto out; - - ret = adxl367_set_measure_en(st, true); - -out: - mutex_unlock(&st->lock); + ret = adxl367_set_measure_en(st, false); + if (ret) + return ret; - iio_device_release_direct_mode(indio_dev); + ret = _adxl367_set_odr(st, odr); + if (ret) + return ret; - return ret; + return adxl367_set_measure_en(st, true); + } + unreachable(); } static int adxl367_set_temp_adc_en(struct adxl367_state *st, unsigned int reg, @@ -749,36 +725,32 @@ static int adxl367_read_sample(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val) { - struct adxl367_state *st = iio_priv(indio_dev); - u16 sample; - int ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + struct adxl367_state *st = iio_priv(indio_dev); + u16 sample; + int ret; - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; + guard(mutex)(&st->lock); - mutex_lock(&st->lock); - - ret = adxl367_set_temp_adc_reg_en(st, chan->address, true); - if (ret) - goto out; - - ret = regmap_bulk_read(st->regmap, chan->address, &st->sample_buf, - sizeof(st->sample_buf)); - if (ret) - goto out; - - sample = FIELD_GET(ADXL367_DATA_MASK, be16_to_cpu(st->sample_buf)); - *val = sign_extend32(sample, chan->scan_type.realbits - 1); + ret = adxl367_set_temp_adc_reg_en(st, chan->address, true); + if (ret) + return ret; - ret = adxl367_set_temp_adc_reg_en(st, chan->address, false); + ret = regmap_bulk_read(st->regmap, chan->address, &st->sample_buf, + sizeof(st->sample_buf)); + if (ret) + return ret; -out: - mutex_unlock(&st->lock); + sample = FIELD_GET(ADXL367_DATA_MASK, be16_to_cpu(st->sample_buf)); + *val = sign_extend32(sample, chan->scan_type.realbits - 1); - iio_device_release_direct_mode(indio_dev); + ret = adxl367_set_temp_adc_reg_en(st, chan->address, false); + if (ret) + return ret; - return ret ?: IIO_VAL_INT; + return IIO_VAL_INT; + } + unreachable(); } static int adxl367_get_status(struct adxl367_state *st, u8 *status, @@ -886,12 +858,12 @@ static int adxl367_read_raw(struct iio_dev *indio_dev, return adxl367_read_sample(indio_dev, chan, val); case IIO_CHAN_INFO_SCALE: switch (chan->type) { - case IIO_ACCEL: - mutex_lock(&st->lock); + case IIO_ACCEL: { + guard(mutex)(&st->lock); *val = adxl367_range_scale_tbl[st->range][0]; *val2 = adxl367_range_scale_tbl[st->range][1]; - mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_NANO; + } case IIO_TEMP: *val = 1000; *val2 = ADXL367_TEMP_PER_C; @@ -914,12 +886,12 @@ static int adxl367_read_raw(struct iio_dev *indio_dev, default: return -EINVAL; } - case IIO_CHAN_INFO_SAMP_FREQ: - mutex_lock(&st->lock); + case IIO_CHAN_INFO_SAMP_FREQ: { + guard(mutex)(&st->lock); *val = adxl367_samp_freq_tbl[st->odr][0]; *val2 = adxl367_samp_freq_tbl[st->odr][1]; - mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_MICRO; + } default: return -EINVAL; } @@ -1004,18 +976,15 @@ static int adxl367_read_event_value(struct iio_dev *indio_dev, { struct adxl367_state *st = iio_priv(indio_dev); + guard(mutex)(&st->lock); switch (info) { case IIO_EV_INFO_VALUE: { switch (dir) { case IIO_EV_DIR_RISING: - mutex_lock(&st->lock); *val = st->act_threshold; - mutex_unlock(&st->lock); return IIO_VAL_INT; case IIO_EV_DIR_FALLING: - mutex_lock(&st->lock); *val = st->inact_threshold; - mutex_unlock(&st->lock); return IIO_VAL_INT; default: return -EINVAL; @@ -1024,15 +993,11 @@ static int adxl367_read_event_value(struct iio_dev *indio_dev, case IIO_EV_INFO_PERIOD: switch (dir) { case IIO_EV_DIR_RISING: - mutex_lock(&st->lock); *val = st->act_time_ms; - mutex_unlock(&st->lock); *val2 = 1000; return IIO_VAL_FRACTIONAL; case IIO_EV_DIR_FALLING: - mutex_lock(&st->lock); *val = st->inact_time_ms; - mutex_unlock(&st->lock); *val2 = 1000; return IIO_VAL_FRACTIONAL; default: @@ -1110,9 +1075,7 @@ static int adxl367_write_event_config(struct iio_dev *indio_dev, enum iio_event_direction dir, int state) { - struct adxl367_state *st = iio_priv(indio_dev); enum adxl367_activity_type act; - int ret; switch (dir) { case IIO_EV_DIR_RISING: @@ -1125,33 +1088,28 @@ static int adxl367_write_event_config(struct iio_dev *indio_dev, return -EINVAL; } - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - mutex_lock(&st->lock); + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + struct adxl367_state *st = iio_priv(indio_dev); + int ret; - ret = adxl367_set_measure_en(st, false); - if (ret) - goto out; + guard(mutex)(&st->lock); - ret = adxl367_set_act_interrupt_en(st, act, state); - if (ret) - goto out; - - ret = adxl367_set_act_en(st, act, state ? ADCL367_ACT_REF_ENABLED - : ADXL367_ACT_DISABLED); - if (ret) - goto out; - - ret = adxl367_set_measure_en(st, true); + ret = adxl367_set_measure_en(st, false); + if (ret) + return ret; -out: - mutex_unlock(&st->lock); + ret = adxl367_set_act_interrupt_en(st, act, state); + if (ret) + return ret; - iio_device_release_direct_mode(indio_dev); + ret = adxl367_set_act_en(st, act, state ? ADCL367_ACT_REF_ENABLED + : ADXL367_ACT_DISABLED); + if (ret) + return ret; - return ret; + return adxl367_set_measure_en(st, true); + } + unreachable(); } static ssize_t adxl367_get_fifo_enabled(struct device *dev, @@ -1176,9 +1134,8 @@ static ssize_t adxl367_get_fifo_watermark(struct device *dev, struct adxl367_state *st = iio_priv(dev_to_iio_dev(dev)); unsigned int fifo_watermark; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); fifo_watermark = st->fifo_watermark; - mutex_unlock(&st->lock); return sysfs_emit(buf, "%d\n", fifo_watermark); } @@ -1207,22 +1164,17 @@ static int adxl367_set_watermark(struct iio_dev *indio_dev, unsigned int val) if (val > ADXL367_FIFO_MAX_WATERMARK) return -EINVAL; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = adxl367_set_measure_en(st, false); if (ret) - goto out; + return ret; ret = adxl367_set_fifo_watermark(st, val); if (ret) - goto out; - - ret = adxl367_set_measure_en(st, true); - -out: - mutex_unlock(&st->lock); + return ret; - return ret; + return adxl367_set_measure_en(st, true); } static bool adxl367_find_mask_fifo_format(const unsigned long *scan_mask, @@ -1253,27 +1205,24 @@ static int adxl367_update_scan_mode(struct iio_dev *indio_dev, if (!adxl367_find_mask_fifo_format(active_scan_mask, &fifo_format)) return -EINVAL; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = adxl367_set_measure_en(st, false); if (ret) - goto out; + return ret; ret = adxl367_set_fifo_format(st, fifo_format); if (ret) - goto out; + return ret; ret = adxl367_set_measure_en(st, true); if (ret) - goto out; + return ret; st->fifo_set_size = bitmap_weight(active_scan_mask, indio_dev->masklength); -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static int adxl367_buffer_postenable(struct iio_dev *indio_dev) @@ -1281,31 +1230,26 @@ static int adxl367_buffer_postenable(struct iio_dev *indio_dev) struct adxl367_state *st = iio_priv(indio_dev); int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = adxl367_set_temp_adc_mask_en(st, indio_dev->active_scan_mask, true); if (ret) - goto out; + return ret; ret = adxl367_set_measure_en(st, false); if (ret) - goto out; + return ret; ret = adxl367_set_fifo_watermark_interrupt_en(st, true); if (ret) - goto out; + return ret; ret = adxl367_set_fifo_mode(st, ADXL367_FIFO_MODE_STREAM); if (ret) - goto out; - - ret = adxl367_set_measure_en(st, true); - -out: - mutex_unlock(&st->lock); + return ret; - return ret; + return adxl367_set_measure_en(st, true); } static int adxl367_buffer_predisable(struct iio_dev *indio_dev) @@ -1313,31 +1257,26 @@ static int adxl367_buffer_predisable(struct iio_dev *indio_dev) struct adxl367_state *st = iio_priv(indio_dev); int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = adxl367_set_measure_en(st, false); if (ret) - goto out; + return ret; ret = adxl367_set_fifo_mode(st, ADXL367_FIFO_MODE_DISABLED); if (ret) - goto out; + return ret; ret = adxl367_set_fifo_watermark_interrupt_en(st, false); if (ret) - goto out; + return ret; ret = adxl367_set_measure_en(st, true); if (ret) - goto out; - - ret = adxl367_set_temp_adc_mask_en(st, indio_dev->active_scan_mask, - false); - -out: - mutex_unlock(&st->lock); + return ret; - return ret; + return adxl367_set_temp_adc_mask_en(st, indio_dev->active_scan_mask, + false); } static const struct iio_buffer_setup_ops adxl367_buffer_ops = { -- cgit v1.2.3 From b6dde1092395088aff1263738c40233d04a7d897 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:31 +0000 Subject: iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode() Similar to existing use of guard() in this driver, iio_device_claim_direct_scoped() will ensure that scope based cleanup occurs. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-5-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi323/bmi323_core.c | 78 ++++++++++++++---------------------- 1 file changed, 31 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/bmi323/bmi323_core.c b/drivers/iio/imu/bmi323/bmi323_core.c index 183af482828f..5d42ab9b176a 100644 --- a/drivers/iio/imu/bmi323/bmi323_core.c +++ b/drivers/iio/imu/bmi323/bmi323_core.c @@ -1668,52 +1668,41 @@ static int bmi323_write_raw(struct iio_dev *indio_dev, int val2, long mask) { struct bmi323_data *data = iio_priv(indio_dev); - int ret; switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = bmi323_set_odr(data, bmi323_iio_to_sensor(chan->type), - val, val2); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return bmi323_set_odr(data, + bmi323_iio_to_sensor(chan->type), + val, val2); + unreachable(); case IIO_CHAN_INFO_SCALE: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = bmi323_set_scale(data, bmi323_iio_to_sensor(chan->type), - val, val2); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return bmi323_set_scale(data, + bmi323_iio_to_sensor(chan->type), + val, val2); + unreachable(); case IIO_CHAN_INFO_OVERSAMPLING_RATIO: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = bmi323_set_average(data, bmi323_iio_to_sensor(chan->type), - val); - - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return bmi323_set_average(data, + bmi323_iio_to_sensor(chan->type), + val); + unreachable(); case IIO_CHAN_INFO_ENABLE: return bmi323_enable_steps(data, val); - case IIO_CHAN_INFO_PROCESSED: - scoped_guard(mutex, &data->mutex) { - if (val || !FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, - data->feature_events)) - return -EINVAL; + case IIO_CHAN_INFO_PROCESSED: { + guard(mutex)(&data->mutex); - /* Clear step counter value */ - ret = bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG, - BMI323_STEP_SC1_RST_CNT_MSK, - FIELD_PREP(BMI323_STEP_SC1_RST_CNT_MSK, - 1)); - } - return ret; + if (val || !FIELD_GET(BMI323_FEAT_IO0_STP_CNT_MSK, + data->feature_events)) + return -EINVAL; + + /* Clear step counter value */ + return bmi323_update_ext_reg(data, BMI323_STEP_SC1_REG, + BMI323_STEP_SC1_RST_CNT_MSK, + FIELD_PREP(BMI323_STEP_SC1_RST_CNT_MSK, + 1)); + } default: return -EINVAL; } @@ -1724,7 +1713,6 @@ static int bmi323_read_raw(struct iio_dev *indio_dev, int *val2, long mask) { struct bmi323_data *data = iio_priv(indio_dev); - int ret; switch (mask) { case IIO_CHAN_INFO_PROCESSED: @@ -1733,14 +1721,10 @@ static int bmi323_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ACCEL: case IIO_ANGL_VEL: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = bmi323_read_axis(data, chan, val); - - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, + indio_dev) + return bmi323_read_axis(data, chan, val); + unreachable(); case IIO_TEMP: return bmi323_get_temp_data(data, val); default: -- cgit v1.2.3 From 3d329bcd48699eb8b0af67f461af7442ac0fb730 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:32 +0000 Subject: iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming. This simplifies error return paths. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-6-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max1363.c | 171 +++++++++++++++++++++------------------------- 1 file changed, 79 insertions(+), 92 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 7c2a98b8c3a9..8b5bc96cb9fb 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -357,62 +357,55 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, int *val, long m) { - int ret = 0; - s32 data; - u8 rxbuf[2]; - struct max1363_state *st = iio_priv(indio_dev); - struct i2c_client *client = st->client; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - - /* - * If monitor mode is enabled, the method for reading a single - * channel will have to be rather different and has not yet - * been implemented. - * - * Also, cannot read directly if buffered capture enabled. - */ - if (st->monitor_on) { - ret = -EBUSY; - goto error_ret; - } - - /* Check to see if current scan mode is correct */ - if (st->current_mode != &max1363_mode_table[chan->address]) { - /* Update scan mode if needed */ - st->current_mode = &max1363_mode_table[chan->address]; - ret = max1363_set_scan_mode(st); - if (ret < 0) - goto error_ret; - } - if (st->chip_info->bits != 8) { - /* Get reading */ - data = st->recv(client, rxbuf, 2); - if (data < 0) { - ret = data; - goto error_ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + s32 data; + u8 rxbuf[2]; + struct max1363_state *st = iio_priv(indio_dev); + struct i2c_client *client = st->client; + + guard(mutex)(&st->lock); + + /* + * If monitor mode is enabled, the method for reading a single + * channel will have to be rather different and has not yet + * been implemented. + * + * Also, cannot read directly if buffered capture enabled. + */ + if (st->monitor_on) + return -EBUSY; + + /* Check to see if current scan mode is correct */ + if (st->current_mode != &max1363_mode_table[chan->address]) { + int ret; + + /* Update scan mode if needed */ + st->current_mode = &max1363_mode_table[chan->address]; + ret = max1363_set_scan_mode(st); + if (ret < 0) + return ret; } - data = (rxbuf[1] | rxbuf[0] << 8) & - ((1 << st->chip_info->bits) - 1); - } else { - /* Get reading */ - data = st->recv(client, rxbuf, 1); - if (data < 0) { - ret = data; - goto error_ret; + if (st->chip_info->bits != 8) { + /* Get reading */ + data = st->recv(client, rxbuf, 2); + if (data < 0) + return data; + + data = (rxbuf[1] | rxbuf[0] << 8) & + ((1 << st->chip_info->bits) - 1); + } else { + /* Get reading */ + data = st->recv(client, rxbuf, 1); + if (data < 0) + return data; + + data = rxbuf[0]; } - data = rxbuf[0]; - } - *val = data; - -error_ret: - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); - return ret; + *val = data; + return 0; + } + unreachable(); } static int max1363_read_raw(struct iio_dev *indio_dev, @@ -710,9 +703,8 @@ static ssize_t max1363_monitor_store_freq(struct device *dev, if (!found) return -EINVAL; - mutex_lock(&st->lock); - st->monitor_speed = i; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) + st->monitor_speed = i; return 0; } @@ -815,12 +807,11 @@ static int max1363_read_event_config(struct iio_dev *indio_dev, int val; int number = chan->channel; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); if (dir == IIO_EV_DIR_FALLING) val = (1 << number) & st->mask_low; else val = (1 << number) & st->mask_high; - mutex_unlock(&st->lock); return val; } @@ -962,46 +953,42 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, int state) { - int ret = 0; struct max1363_state *st = iio_priv(indio_dev); - u16 unifiedmask; - int number = chan->channel; - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - mutex_lock(&st->lock); - - unifiedmask = st->mask_low | st->mask_high; - if (dir == IIO_EV_DIR_FALLING) { - - if (state == 0) - st->mask_low &= ~(1 << number); - else { - ret = __max1363_check_event_mask((1 << number), - unifiedmask); - if (ret) - goto error_ret; - st->mask_low |= (1 << number); - } - } else { - if (state == 0) - st->mask_high &= ~(1 << number); - else { - ret = __max1363_check_event_mask((1 << number), - unifiedmask); - if (ret) - goto error_ret; - st->mask_high |= (1 << number); + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + int number = chan->channel; + u16 unifiedmask; + int ret; + + guard(mutex)(&st->lock); + + unifiedmask = st->mask_low | st->mask_high; + if (dir == IIO_EV_DIR_FALLING) { + + if (state == 0) + st->mask_low &= ~(1 << number); + else { + ret = __max1363_check_event_mask((1 << number), + unifiedmask); + if (ret) + return ret; + st->mask_low |= (1 << number); + } + } else { + if (state == 0) + st->mask_high &= ~(1 << number); + else { + ret = __max1363_check_event_mask((1 << number), + unifiedmask); + if (ret) + return ret; + st->mask_high |= (1 << number); + } } } - max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low)); -error_ret: - mutex_unlock(&st->lock); - iio_device_release_direct_mode(indio_dev); - return ret; + return 0; } /* -- cgit v1.2.3 From fba730dd8ad14770a35400d61b09d1f5197c162a Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:33 +0000 Subject: iio: proximity: sx9360: Use automated cleanup for locks and IIO mode claiming. This simplifies error handling paths and generallly removes a bunch of boilerplate. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-7-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/sx9360.c | 115 ++++++++++++++--------------------------- 1 file changed, 39 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c index 2c4e14a4fe9f..75a1c29f14eb 100644 --- a/drivers/iio/proximity/sx9360.c +++ b/drivers/iio/proximity/sx9360.c @@ -322,25 +322,16 @@ static int sx9360_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct sx_common_data *data = iio_priv(indio_dev); - int ret; switch (mask) { case IIO_CHAN_INFO_RAW: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = sx_common_read_proximity(data, chan, val); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return sx_common_read_proximity(data, chan, val); + unreachable(); case IIO_CHAN_INFO_HARDWAREGAIN: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = sx9360_read_gain(data, chan, val); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return sx9360_read_gain(data, chan, val); + unreachable(); case IIO_CHAN_INFO_SAMP_FREQ: return sx9360_read_samp_freq(data, val, val2); default: @@ -387,19 +378,15 @@ static int sx9360_read_avail(struct iio_dev *indio_dev, static int sx9360_set_samp_freq(struct sx_common_data *data, int val, int val2) { - int ret, reg; + int reg; __be16 buf; reg = val * 8192 / SX9360_FOSC_HZ + val2 * 8192 / (SX9360_FOSC_MHZ); buf = cpu_to_be16(reg); - mutex_lock(&data->mutex); - - ret = regmap_bulk_write(data->regmap, SX9360_REG_GNRL_CTRL1, &buf, - sizeof(buf)); + guard(mutex)(&data->mutex); - mutex_unlock(&data->mutex); - - return ret; + return regmap_bulk_write(data->regmap, SX9360_REG_GNRL_CTRL1, &buf, + sizeof(buf)); } static int sx9360_read_thresh(struct sx_common_data *data, int *val) @@ -510,7 +497,6 @@ static int sx9360_read_event_val(struct iio_dev *indio_dev, static int sx9360_write_thresh(struct sx_common_data *data, int _val) { unsigned int val = _val; - int ret; if (val >= 1) val = int_sqrt(2 * val); @@ -518,11 +504,8 @@ static int sx9360_write_thresh(struct sx_common_data *data, int _val) if (val > 0xff) return -EINVAL; - mutex_lock(&data->mutex); - ret = regmap_write(data->regmap, SX9360_REG_PROX_CTRL5, val); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_write(data->regmap, SX9360_REG_PROX_CTRL5, val); } static int sx9360_write_hysteresis(struct sx_common_data *data, int _val) @@ -546,18 +529,14 @@ static int sx9360_write_hysteresis(struct sx_common_data *data, int _val) return -EINVAL; hyst = FIELD_PREP(SX9360_REG_PROX_CTRL4_HYST_MASK, hyst); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, - SX9360_REG_PROX_CTRL4_HYST_MASK, hyst); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, + SX9360_REG_PROX_CTRL4_HYST_MASK, hyst); } static int sx9360_write_far_debounce(struct sx_common_data *data, int _val) { unsigned int regval, val = _val; - int ret; if (val > 0) val = ilog2(val); @@ -566,19 +545,15 @@ static int sx9360_write_far_debounce(struct sx_common_data *data, int _val) regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, val); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, - SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, - regval); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, + SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, + regval); } static int sx9360_write_close_debounce(struct sx_common_data *data, int _val) { unsigned int regval, val = _val; - int ret; if (val > 0) val = ilog2(val); @@ -587,13 +562,10 @@ static int sx9360_write_close_debounce(struct sx_common_data *data, int _val) regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, val); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, - SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, - regval); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4, + SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, + regval); } static int sx9360_write_event_val(struct iio_dev *indio_dev, @@ -630,19 +602,15 @@ static int sx9360_write_gain(struct sx_common_data *data, const struct iio_chan_spec *chan, int val) { unsigned int gain, reg; - int ret; gain = ilog2(val); reg = SX9360_REG_PROX_CTRL0_PHR + chan->channel; gain = FIELD_PREP(SX9360_REG_PROX_CTRL0_GAIN_MASK, gain); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, reg, - SX9360_REG_PROX_CTRL0_GAIN_MASK, - gain); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, reg, + SX9360_REG_PROX_CTRL0_GAIN_MASK, + gain); } static int sx9360_write_raw(struct iio_dev *indio_dev, @@ -827,36 +795,31 @@ static int sx9360_suspend(struct device *dev) disable_irq_nosync(data->client->irq); - mutex_lock(&data->mutex); + guard(mutex)(&data->mutex); ret = regmap_read(data->regmap, SX9360_REG_GNRL_CTRL0, ®val); + if (ret < 0) + return ret; data->suspend_ctrl = FIELD_GET(SX9360_REG_GNRL_CTRL0_PHEN_MASK, regval); - if (ret < 0) - goto out; /* Disable all phases, send the device to sleep. */ - ret = regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0); - -out: - mutex_unlock(&data->mutex); - return ret; + return regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0); } static int sx9360_resume(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); - int ret; - - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9360_REG_GNRL_CTRL0, - SX9360_REG_GNRL_CTRL0_PHEN_MASK, - data->suspend_ctrl); - mutex_unlock(&data->mutex); - if (ret) - return ret; + scoped_guard(mutex, &data->mutex) { + int ret = regmap_update_bits(data->regmap, + SX9360_REG_GNRL_CTRL0, + SX9360_REG_GNRL_CTRL0_PHEN_MASK, + data->suspend_ctrl); + if (ret) + return ret; + } enable_irq(data->client->irq); return 0; } -- cgit v1.2.3 From d62f68c13f3151e33a3d13cd94ba42f474dc3cce Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:34 +0000 Subject: iio: proximity: sx9324: Use automated cleanup for locks and IIO mode claiming. This simplifies error handling paths and generallly removes a bunch of boilerplate. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-8-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/sx9324.c | 109 +++++++++++++++-------------------------- 1 file changed, 39 insertions(+), 70 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c index b0403fc7906b..aa0d14a49d5e 100644 --- a/drivers/iio/proximity/sx9324.c +++ b/drivers/iio/proximity/sx9324.c @@ -429,25 +429,16 @@ static int sx9324_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct sx_common_data *data = iio_priv(indio_dev); - int ret; switch (mask) { case IIO_CHAN_INFO_RAW: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = sx_common_read_proximity(data, chan, val); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return sx_common_read_proximity(data, chan, val); + unreachable(); case IIO_CHAN_INFO_HARDWAREGAIN: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = sx9324_read_gain(data, chan, val); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return sx9324_read_gain(data, chan, val); + unreachable(); case IIO_CHAN_INFO_SAMP_FREQ: return sx9324_read_samp_freq(data, val, val2); default: @@ -484,7 +475,7 @@ static int sx9324_read_avail(struct iio_dev *indio_dev, static int sx9324_set_samp_freq(struct sx_common_data *data, int val, int val2) { - int i, ret; + int i; for (i = 0; i < ARRAY_SIZE(sx9324_samp_freq_table); i++) if (val == sx9324_samp_freq_table[i].val && @@ -494,15 +485,11 @@ static int sx9324_set_samp_freq(struct sx_common_data *data, if (i == ARRAY_SIZE(sx9324_samp_freq_table)) return -EINVAL; - mutex_lock(&data->mutex); - - ret = regmap_update_bits(data->regmap, - SX9324_REG_GNRL_CTRL0, - SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, i); + guard(mutex)(&data->mutex); - mutex_unlock(&data->mutex); - - return ret; + return regmap_update_bits(data->regmap, + SX9324_REG_GNRL_CTRL0, + SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, i); } static int sx9324_read_thresh(struct sx_common_data *data, @@ -623,7 +610,6 @@ static int sx9324_write_thresh(struct sx_common_data *data, const struct iio_chan_spec *chan, int _val) { unsigned int reg, val = _val; - int ret; reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2; @@ -633,11 +619,9 @@ static int sx9324_write_thresh(struct sx_common_data *data, if (val > 0xff) return -EINVAL; - mutex_lock(&data->mutex); - ret = regmap_write(data->regmap, reg, val); - mutex_unlock(&data->mutex); + guard(mutex)(&data->mutex); - return ret; + return regmap_write(data->regmap, reg, val); } static int sx9324_write_hysteresis(struct sx_common_data *data, @@ -662,18 +646,15 @@ static int sx9324_write_hysteresis(struct sx_common_data *data, return -EINVAL; hyst = FIELD_PREP(SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, - SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); - mutex_unlock(&data->mutex); + guard(mutex)(&data->mutex); - return ret; + return regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, + SX9324_REG_PROX_CTRL5_HYST_MASK, hyst); } static int sx9324_write_far_debounce(struct sx_common_data *data, int _val) { unsigned int regval, val = _val; - int ret; if (val > 0) val = ilog2(val); @@ -682,19 +663,16 @@ static int sx9324_write_far_debounce(struct sx_common_data *data, int _val) regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, - SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, - regval); - mutex_unlock(&data->mutex); + guard(mutex)(&data->mutex); - return ret; + return regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, + SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, + regval); } static int sx9324_write_close_debounce(struct sx_common_data *data, int _val) { unsigned int regval, val = _val; - int ret; if (val > 0) val = ilog2(val); @@ -703,13 +681,11 @@ static int sx9324_write_close_debounce(struct sx_common_data *data, int _val) regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, - SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, - regval); - mutex_unlock(&data->mutex); + guard(mutex)(&data->mutex); - return ret; + return regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5, + SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, + regval); } static int sx9324_write_event_val(struct iio_dev *indio_dev, @@ -746,7 +722,6 @@ static int sx9324_write_gain(struct sx_common_data *data, const struct iio_chan_spec *chan, int val) { unsigned int gain, reg; - int ret; reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2; @@ -756,13 +731,11 @@ static int sx9324_write_gain(struct sx_common_data *data, gain = FIELD_PREP(SX9324_REG_PROX_CTRL0_GAIN_MASK, gain); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, reg, - SX9324_REG_PROX_CTRL0_GAIN_MASK, - gain); - mutex_unlock(&data->mutex); + guard(mutex)(&data->mutex); - return ret; + return regmap_update_bits(data->regmap, reg, + SX9324_REG_PROX_CTRL0_GAIN_MASK, + gain); } static int sx9324_write_raw(struct iio_dev *indio_dev, @@ -1092,34 +1065,30 @@ static int sx9324_suspend(struct device *dev) disable_irq_nosync(data->client->irq); - mutex_lock(&data->mutex); + guard(mutex)(&data->mutex); ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL1, ®val); + if (ret < 0) + return ret; data->suspend_ctrl = FIELD_GET(SX9324_REG_GNRL_CTRL1_PHEN_MASK, regval); - if (ret < 0) - goto out; /* Disable all phases, send the device to sleep. */ - ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0); - -out: - mutex_unlock(&data->mutex); - return ret; + return regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0); } static int sx9324_resume(struct device *dev) { struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); - int ret; - mutex_lock(&data->mutex); - ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, - data->suspend_ctrl | SX9324_REG_GNRL_CTRL1_PAUSECTRL); - mutex_unlock(&data->mutex); - if (ret) - return ret; + scoped_guard(mutex, &data->mutex) { + int ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, + data->suspend_ctrl | + SX9324_REG_GNRL_CTRL1_PAUSECTRL); + if (ret) + return ret; + } enable_irq(data->client->irq); return 0; -- cgit v1.2.3 From fb1f19713d4134436398c9201460cba204a6fb51 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:35 +0000 Subject: iio: proximity: sx9310: Use automated cleanup for locks and IIO mode claiming. This simplifies error handling paths and generallly removes a bunch of boilerplate. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-9-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/sx9310.c | 114 ++++++++++++++--------------------------- 1 file changed, 39 insertions(+), 75 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c index 0d230a0dff56..427c9343d6d1 100644 --- a/drivers/iio/proximity/sx9310.c +++ b/drivers/iio/proximity/sx9310.c @@ -337,28 +337,19 @@ static int sx9310_read_raw(struct iio_dev *indio_dev, int *val2, long mask) { struct sx_common_data *data = iio_priv(indio_dev); - int ret; if (chan->type != IIO_PROXIMITY) return -EINVAL; switch (mask) { case IIO_CHAN_INFO_RAW: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = sx_common_read_proximity(data, chan, val); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return sx_common_read_proximity(data, chan, val); + unreachable(); case IIO_CHAN_INFO_HARDWAREGAIN: - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; - - ret = sx9310_read_gain(data, chan, val); - iio_device_release_direct_mode(indio_dev); - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) + return sx9310_read_gain(data, chan, val); + unreachable(); case IIO_CHAN_INFO_SAMP_FREQ: return sx9310_read_samp_freq(data, val, val2); default: @@ -546,12 +537,10 @@ static int sx9310_write_thresh(struct sx_common_data *data, return -EINVAL; regval = FIELD_PREP(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, reg, - SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); - mutex_unlock(&data->mutex); - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, reg, + SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); } static int sx9310_write_hysteresis(struct sx_common_data *data, @@ -576,17 +565,14 @@ static int sx9310_write_hysteresis(struct sx_common_data *data, return -EINVAL; hyst = FIELD_PREP(SX9310_REG_PROX_CTRL10_HYST_MASK, hyst); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, - SX9310_REG_PROX_CTRL10_HYST_MASK, hyst); - mutex_unlock(&data->mutex); - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, + SX9310_REG_PROX_CTRL10_HYST_MASK, hyst); } static int sx9310_write_far_debounce(struct sx_common_data *data, int val) { - int ret; unsigned int regval; if (val > 0) @@ -596,18 +582,14 @@ static int sx9310_write_far_debounce(struct sx_common_data *data, int val) regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, - SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, - regval); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, + SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, + regval); } static int sx9310_write_close_debounce(struct sx_common_data *data, int val) { - int ret; unsigned int regval; if (val > 0) @@ -617,13 +599,10 @@ static int sx9310_write_close_debounce(struct sx_common_data *data, int val) regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val); - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, - SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, - regval); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10, + SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, + regval); } static int sx9310_write_event_val(struct iio_dev *indio_dev, @@ -658,7 +637,7 @@ static int sx9310_write_event_val(struct iio_dev *indio_dev, static int sx9310_set_samp_freq(struct sx_common_data *data, int val, int val2) { - int i, ret; + int i; for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++) if (val == sx9310_samp_freq_table[i].val && @@ -668,23 +647,17 @@ static int sx9310_set_samp_freq(struct sx_common_data *data, int val, int val2) if (i == ARRAY_SIZE(sx9310_samp_freq_table)) return -EINVAL; - mutex_lock(&data->mutex); - - ret = regmap_update_bits( + guard(mutex)(&data->mutex); + return regmap_update_bits( data->regmap, SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, FIELD_PREP(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, i)); - - mutex_unlock(&data->mutex); - - return ret; } static int sx9310_write_gain(struct sx_common_data *data, const struct iio_chan_spec *chan, int val) { unsigned int gain, mask; - int ret; gain = ilog2(val); @@ -703,12 +676,9 @@ static int sx9310_write_gain(struct sx_common_data *data, return -EINVAL; } - mutex_lock(&data->mutex); - ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL3, mask, - gain); - mutex_unlock(&data->mutex); - - return ret; + guard(mutex)(&data->mutex); + return regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL3, mask, + gain); } static int sx9310_write_raw(struct iio_dev *indio_dev, @@ -969,22 +939,18 @@ static int sx9310_suspend(struct device *dev) disable_irq_nosync(data->client->irq); - mutex_lock(&data->mutex); + guard(mutex)(&data->mutex); ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &data->suspend_ctrl); if (ret) - goto out; + return ret; ctrl0 = data->suspend_ctrl & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK; ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0); if (ret) - goto out; - - ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0); + return ret; -out: - mutex_unlock(&data->mutex); - return ret; + return regmap_write(data->regmap, SX9310_REG_PAUSE, 0); } static int sx9310_resume(struct device *dev) @@ -992,18 +958,16 @@ static int sx9310_resume(struct device *dev) struct sx_common_data *data = iio_priv(dev_get_drvdata(dev)); int ret; - mutex_lock(&data->mutex); - ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1); - if (ret) - goto out; - - ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, - data->suspend_ctrl); + scoped_guard(mutex, &data->mutex) { + ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1); + if (ret) + return ret; -out: - mutex_unlock(&data->mutex); - if (ret) - return ret; + ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, + data->suspend_ctrl); + if (ret) + return ret; + } enable_irq(data->client->irq); return 0; -- cgit v1.2.3 From 1fa220ec61ffbcf4aec524c3b477f362d40e918b Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:36 +0000 Subject: iio: adc: ad4130: Use automatic cleanup of locks and direct mode. Reduces boilerplate and allows for simpler to follow direct returns. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-10-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad4130.c | 131 +++++++++++++++++++---------------------------- 1 file changed, 52 insertions(+), 79 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad4130.c b/drivers/iio/adc/ad4130.c index feb86fe6c422..53e19a863198 100644 --- a/drivers/iio/adc/ad4130.c +++ b/drivers/iio/adc/ad4130.c @@ -887,9 +887,9 @@ static int ad4130_set_filter_mode(struct iio_dev *indio_dev, unsigned int old_fs; int ret = 0; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); if (setup_info->filter_mode == val) - goto out; + return 0; old_fs = setup_info->fs; old_filter_mode = setup_info->filter_mode; @@ -911,12 +911,10 @@ static int ad4130_set_filter_mode(struct iio_dev *indio_dev, if (ret) { setup_info->fs = old_fs; setup_info->filter_mode = old_filter_mode; + return ret; } - out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static int ad4130_get_filter_mode(struct iio_dev *indio_dev, @@ -927,9 +925,8 @@ static int ad4130_get_filter_mode(struct iio_dev *indio_dev, struct ad4130_setup_info *setup_info = &st->chans_info[channel].setup; enum ad4130_filter_mode filter_mode; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); filter_mode = setup_info->filter_mode; - mutex_unlock(&st->lock); return filter_mode; } @@ -971,7 +968,7 @@ static int ad4130_set_channel_pga(struct ad4130_state *st, unsigned int channel, struct ad4130_chan_info *chan_info = &st->chans_info[channel]; struct ad4130_setup_info *setup_info = &chan_info->setup; unsigned int pga, old_pga; - int ret = 0; + int ret; for (pga = 0; pga < AD4130_MAX_PGA; pga++) if (val == st->scale_tbls[setup_info->ref_sel][pga][0] && @@ -981,21 +978,20 @@ static int ad4130_set_channel_pga(struct ad4130_state *st, unsigned int channel, if (pga == AD4130_MAX_PGA) return -EINVAL; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); if (pga == setup_info->pga) - goto out; + return 0; old_pga = setup_info->pga; setup_info->pga = pga; ret = ad4130_write_channel_setup(st, channel, false); - if (ret) + if (ret) { setup_info->pga = old_pga; + return ret; + } -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static int ad4130_set_channel_freq(struct ad4130_state *st, @@ -1004,26 +1000,25 @@ static int ad4130_set_channel_freq(struct ad4130_state *st, struct ad4130_chan_info *chan_info = &st->chans_info[channel]; struct ad4130_setup_info *setup_info = &chan_info->setup; unsigned int fs, old_fs; - int ret = 0; + int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); old_fs = setup_info->fs; ad4130_freq_to_fs(setup_info->filter_mode, val, val2, &fs); if (fs == setup_info->fs) - goto out; + return 0; setup_info->fs = fs; ret = ad4130_write_channel_setup(st, channel, false); - if (ret) + if (ret) { setup_info->fs = old_fs; + return ret; + } -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static int _ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel, @@ -1065,20 +1060,13 @@ static int _ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel, static int ad4130_read_sample(struct iio_dev *indio_dev, unsigned int channel, int *val) { - struct ad4130_state *st = iio_priv(indio_dev); - int ret; - - ret = iio_device_claim_direct_mode(indio_dev); - if (ret) - return ret; + iio_device_claim_direct_scoped(return -EBUSY, indio_dev) { + struct ad4130_state *st = iio_priv(indio_dev); - mutex_lock(&st->lock); - ret = _ad4130_read_sample(indio_dev, channel, val); - mutex_unlock(&st->lock); - - iio_device_release_direct_mode(indio_dev); - - return ret; + guard(mutex)(&st->lock); + return _ad4130_read_sample(indio_dev, channel, val); + } + unreachable(); } static int ad4130_read_raw(struct iio_dev *indio_dev, @@ -1092,24 +1080,24 @@ static int ad4130_read_raw(struct iio_dev *indio_dev, switch (info) { case IIO_CHAN_INFO_RAW: return ad4130_read_sample(indio_dev, channel, val); - case IIO_CHAN_INFO_SCALE: - mutex_lock(&st->lock); + case IIO_CHAN_INFO_SCALE: { + guard(mutex)(&st->lock); *val = st->scale_tbls[setup_info->ref_sel][setup_info->pga][0]; *val2 = st->scale_tbls[setup_info->ref_sel][setup_info->pga][1]; - mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_NANO; + } case IIO_CHAN_INFO_OFFSET: *val = st->bipolar ? -BIT(chan->scan_type.realbits - 1) : 0; return IIO_VAL_INT; - case IIO_CHAN_INFO_SAMP_FREQ: - mutex_lock(&st->lock); + case IIO_CHAN_INFO_SAMP_FREQ: { + guard(mutex)(&st->lock); ad4130_fs_to_freq(setup_info->filter_mode, setup_info->fs, val, val2); - mutex_unlock(&st->lock); return IIO_VAL_INT_PLUS_NANO; + } default: return -EINVAL; } @@ -1134,9 +1122,9 @@ static int ad4130_read_avail(struct iio_dev *indio_dev, return IIO_AVAIL_LIST; case IIO_CHAN_INFO_SAMP_FREQ: - mutex_lock(&st->lock); - filter_config = &ad4130_filter_configs[setup_info->filter_mode]; - mutex_unlock(&st->lock); + scoped_guard(mutex, &st->lock) { + filter_config = &ad4130_filter_configs[setup_info->filter_mode]; + } *vals = (int *)filter_config->samp_freq_avail; *length = filter_config->samp_freq_avail_len * 2; @@ -1197,21 +1185,18 @@ static int ad4130_update_scan_mode(struct iio_dev *indio_dev, unsigned int val = 0; int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); for_each_set_bit(channel, scan_mask, indio_dev->num_channels) { ret = ad4130_set_channel_enable(st, channel, true); if (ret) - goto out; + return ret; val++; } st->num_enabled_channels = val; -out: - mutex_unlock(&st->lock); - return 0; } @@ -1232,22 +1217,19 @@ static int ad4130_set_fifo_watermark(struct iio_dev *indio_dev, unsigned int val */ eff = rounddown(AD4130_FIFO_SIZE, st->num_enabled_channels); - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = regmap_update_bits(st->regmap, AD4130_FIFO_CONTROL_REG, AD4130_FIFO_CONTROL_WM_MASK, FIELD_PREP(AD4130_FIFO_CONTROL_WM_MASK, ad4130_watermark_reg_val(eff))); if (ret) - goto out; + return ret; st->effective_watermark = eff; st->watermark = val; -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static const struct iio_info ad4130_info = { @@ -1265,26 +1247,21 @@ static int ad4130_buffer_postenable(struct iio_dev *indio_dev) struct ad4130_state *st = iio_priv(indio_dev); int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = ad4130_set_watermark_interrupt_en(st, true); if (ret) - goto out; + return ret; ret = irq_set_irq_type(st->spi->irq, st->inv_irq_trigger); if (ret) - goto out; + return ret; ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_WM); if (ret) - goto out; - - ret = ad4130_set_mode(st, AD4130_MODE_CONTINUOUS); - -out: - mutex_unlock(&st->lock); + return ret; - return ret; + return ad4130_set_mode(st, AD4130_MODE_CONTINUOUS); } static int ad4130_buffer_predisable(struct iio_dev *indio_dev) @@ -1293,23 +1270,23 @@ static int ad4130_buffer_predisable(struct iio_dev *indio_dev) unsigned int i; int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); ret = ad4130_set_mode(st, AD4130_MODE_IDLE); if (ret) - goto out; + return ret; ret = irq_set_irq_type(st->spi->irq, st->irq_trigger); if (ret) - goto out; + return ret; ret = ad4130_set_fifo_mode(st, AD4130_FIFO_MODE_DISABLED); if (ret) - goto out; + return ret; ret = ad4130_set_watermark_interrupt_en(st, false); if (ret) - goto out; + return ret; /* * update_scan_mode() is not called in the disable path, disable all @@ -1318,13 +1295,10 @@ static int ad4130_buffer_predisable(struct iio_dev *indio_dev) for (i = 0; i < indio_dev->num_channels; i++) { ret = ad4130_set_channel_enable(st, i, false); if (ret) - goto out; + return ret; } -out: - mutex_unlock(&st->lock); - - return ret; + return 0; } static const struct iio_buffer_setup_ops ad4130_buffer_ops = { @@ -1338,9 +1312,8 @@ static ssize_t hwfifo_watermark_show(struct device *dev, struct ad4130_state *st = iio_priv(dev_to_iio_dev(dev)); unsigned int val; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); val = st->watermark; - mutex_unlock(&st->lock); return sysfs_emit(buf, "%d\n", val); } -- cgit v1.2.3 From 129e8619fccb82a3cf0e096f145d277552690de7 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 28 Jan 2024 15:05:37 +0000 Subject: iio: adc: ad7091r-base: Use auto cleanup of locks. Done to reduce boilerplate and simplify code flow by allowing early returns with the lock automatically released. Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240128150537.44592-11-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7091r-base.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c index f4255b91acfc..d6876259ad14 100644 --- a/drivers/iio/adc/ad7091r-base.c +++ b/drivers/iio/adc/ad7091r-base.c @@ -86,28 +86,25 @@ static int ad7091r_read_raw(struct iio_dev *iio_dev, unsigned int read_val; int ret; - mutex_lock(&st->lock); + guard(mutex)(&st->lock); switch (m) { case IIO_CHAN_INFO_RAW: - if (st->mode != AD7091R_MODE_COMMAND) { - ret = -EBUSY; - goto unlock; - } + if (st->mode != AD7091R_MODE_COMMAND) + return -EBUSY; ret = ad7091r_read_one(iio_dev, chan->channel, &read_val); if (ret) - goto unlock; + return ret; *val = read_val; - ret = IIO_VAL_INT; - break; + return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: if (st->vref) { ret = regulator_get_voltage(st->vref); if (ret < 0) - goto unlock; + return ret; *val = ret / 1000; } else { @@ -115,17 +112,11 @@ static int ad7091r_read_raw(struct iio_dev *iio_dev, } *val2 = chan->scan_type.realbits; - ret = IIO_VAL_FRACTIONAL_LOG2; - break; + return IIO_VAL_FRACTIONAL_LOG2; default: - ret = -EINVAL; - break; + return -EINVAL; } - -unlock: - mutex_unlock(&st->lock); - return ret; } static int ad7091r_read_event_config(struct iio_dev *indio_dev, -- cgit v1.2.3 From 0e2bf22aede4c6d7a0494aa2df636ff16bab41eb Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 3 Feb 2024 13:01:36 +0100 Subject: iio: imu: st_lsm6dsx: improve kernel docs and comments Improve kernel docs and comments reporting supported sensors in a list in order to make more easy to add new devices in the future. Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/d365d048253d2ff9ee0092d391bbaa9cf0737cff.1706961432.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/Kconfig | 30 +++++++++++++++++++++----- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 27 ++++++++++++++++++++--- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 28 ++++++++++++++++++------ 3 files changed, 71 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 5865a295a4df..24914946f914 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -11,11 +11,31 @@ config IIO_ST_LSM6DSX select IIO_ST_LSM6DSX_I3C if (I3C) help Say yes here to build support for STMicroelectronics LSM6DSx imu - sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, - ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr, - lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx, - lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, asm330lhb, lsm6dst - and the accelerometer/gyroscope of lsm9ds1. + sensor. + Supported devices: + - asm330lhb + - asm330lhh + - asm330lhhx + - ism330dhcx + - ism330dlc + - ism330is + - lsm6ds0 + - lsm6ds3 + - lsm6ds3h + - lsm6ds3tr-c + - lsm6dsl + - lsm6dsm + - lsm6dso + - lsm6dso16is + - lsm6dsop + - lsm6dsox + - lsm6dsr + - lsm6dsrx + - lsm6dst + - lsm6dstx + - lsm6dsv + - lsm6dsv16x + - lsm9ds1 To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 066fe561c5e8..154f92fa9a87 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -2,7 +2,7 @@ /* * STMicroelectronics st_lsm6dsx FIFO buffer library driver * - * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C: + * Pattern FIFO: * The FIFO buffer can be configured to store data from gyroscope and * accelerometer. Samples are queued without any tag according to a * specific pattern based on 'FIFO data sets' (6 bytes each): @@ -14,12 +14,33 @@ * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the * value of the decimation factor and ODR set for each FIFO data set. * - * LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/ - * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV/ASM330LHB: + * Supported devices: + * - ISM330DLC + * - LSM6DS3 + * - LSM6DS3H + * - LSM6DS3TR-C + * - LSM6DSL + * - LSM6DSM + * + * Tagged FIFO: * The FIFO buffer can be configured to store data from gyroscope and * accelerometer. Each sample is queued with a tag (1B) indicating data * source (gyroscope, accelerometer, hw timer). * + * Supported devices: + * - ASM330LHB + * - ASM330LHH + * - ASM330LHHX + * - ISM330DHCX + * - LSM6DSO + * - LSM6DSOP + * - LSM6DSOX + * - LSM6DSR + * - LSM6DSRX + * - LSM6DST + * - LSM6DSTX + * - LSM6DSV + * * FIFO supported modes: * - BYPASS: FIFO disabled * - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index b6e6b1df8a61..01ef9d38aadd 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -14,34 +14,50 @@ * by a different driver. * * Supported sensors: - * - LSM6DS3: + * + * - LSM6DS3 * - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 8KB * - * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C: + * - ISM330DLC + * - LSM6DS3H + * - LSM6DS3TR-C + * - LSM6DSL + * - LSM6DSM * - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 4KB * - * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/ - * LSM6DSTX/LSM6DSO16IS/ISM330IS: + * - ASM330LHH + * - ASM330LHHX + * - ISM330DHCX + * - ISM330IS + * - LSM6DSO + * - LSM6DSO16IS + * - LSM6DSOP + * - LSM6DSOX + * - LSM6DSR + * - LSM6DST + * - LSM6DSTX * - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416, * 833 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 3KB * - * - LSM6DSV/LSM6DSV16X: + * - LSM6DSV + * - LSM6DSV16X * - Accelerometer/Gyroscope supported ODR [Hz]: 7.5, 15, 30, 60, 120, 240, * 480, 960 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-250/+-500/+-1000/+-2000 * - FIFO size: 3KB * - * - LSM9DS1/LSM6DS0: + * - LSM6DS0 + * - LSM9DS1 * - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952 -- cgit v1.2.3 From 16ac43a1b18cb07d2c1c72f81027968315a8bb53 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sat, 3 Feb 2024 13:01:37 +0100 Subject: iio: imu: st_lsm6dsx: add support to ASM330LHHXG1 Add support to STM ASM330LHHXG1 (accelerometer and gyroscope) Mems sensor. The ASM330LHHXG1 sensor can use LSM6DSR as fallback device since LSM6DSR implements all the ASM330LHHXG1 features currently implemented in st_lsm6dsx. Link: https://www.st.com/resource/en/datasheet/asm330lhhxg1.pdf Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/e3dbe4720cdf407d0152e93b1331306a8c7f5df3.1706961432.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/Kconfig | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 24914946f914..89d687ec3099 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -16,6 +16,7 @@ config IIO_ST_LSM6DSX - asm330lhb - asm330lhh - asm330lhhx + - asm330lhhxg1 - ism330dhcx - ism330dlc - ism330is diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index c19237717e81..a3b93566533b 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -38,6 +38,7 @@ #define ST_LSM6DSO16IS_DEV_NAME "lsm6dso16is" #define ST_ISM330IS_DEV_NAME "ism330is" #define ST_ASM330LHB_DEV_NAME "asm330lhb" +#define ST_ASM330LHHXG1_DEV_NAME "asm330lhhxg1" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID = 1, @@ -63,6 +64,7 @@ enum st_lsm6dsx_hw_id { ST_LSM6DSO16IS_ID, ST_ISM330IS_ID, ST_ASM330LHB_ID, + ST_ASM330LHHXG1_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 154f92fa9a87..0a7cd8c1aa33 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -31,6 +31,7 @@ * - ASM330LHB * - ASM330LHH * - ASM330LHHX + * - ASM330LHHXG1 * - ISM330DHCX * - LSM6DSO * - LSM6DSOP diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 01ef9d38aadd..0716986f9812 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -33,6 +33,7 @@ * * - ASM330LHH * - ASM330LHHX + * - ASM330LHHXG1 * - ISM330DHCX * - ISM330IS * - LSM6DSO @@ -836,6 +837,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { .hw_id = ST_ASM330LHHX_ID, .name = ST_ASM330LHHX_DEV_NAME, .wai = 0x6b, + }, { + .hw_id = ST_ASM330LHHXG1_ID, + .name = ST_ASM330LHHXG1_DEV_NAME, + .wai = 0x6b, }, { .hw_id = ST_LSM6DSTX_ID, .name = ST_LSM6DSTX_DEV_NAME, diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index 911444ec57c0..cddf41cc0ca9 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -134,6 +134,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,asm330lhb", .data = (void *)ST_ASM330LHB_ID, }, + { + .compatible = "st,asm330lhhxg1", + .data = (void *)ST_ASM330LHHXG1_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -168,6 +172,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID }, { ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID }, { ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID }, + { ST_ASM330LHHXG1_DEV_NAME, ST_ASM330LHHXG1_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index f56c170c41a9..c122c8831365 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -129,6 +129,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,asm330lhb", .data = (void *)ST_ASM330LHB_ID, }, + { + .compatible = "st,asm330lhhxg1", + .data = (void *)ST_ASM330LHHXG1_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -157,6 +161,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID }, { ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID }, { ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID }, + { ST_ASM330LHHXG1_DEV_NAME, ST_ASM330LHHXG1_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); -- cgit v1.2.3 From 89b1b86fc77367fac470258acdf470ffe2edc8d4 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Thu, 8 Feb 2024 16:37:19 -0300 Subject: iio: core: make iio_bus_type const Now that the driver core can properly handle constant struct bus_type, move the iio_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: Ricardo B. Marliere Acked-by: Nuno Sa Link: https://lore.kernel.org/r/20240208-bus_cleanup-iio-v1-1-4a167c3b5fb3@marliere.net Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-core.c | 2 +- include/linux/iio/iio.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index e8551a1636ba..9b2877fe8689 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -42,7 +42,7 @@ static DEFINE_IDA(iio_ida); static dev_t iio_devt; #define IIO_DEV_MAX 256 -struct bus_type iio_bus_type = { +const struct bus_type iio_bus_type = { .name = "iio", }; EXPORT_SYMBOL(iio_bus_type); diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 4f89279e531c..e370a7bb3300 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -669,7 +669,7 @@ DEFINE_GUARD_COND(iio_claim_direct, _try, ({ int iio_device_claim_buffer_mode(struct iio_dev *indio_dev); void iio_device_release_buffer_mode(struct iio_dev *indio_dev); -extern struct bus_type iio_bus_type; +extern const struct bus_type iio_bus_type; /** * iio_device_put() - reference counted deallocation of struct device -- cgit v1.2.3 From ca2f16c315683d9922445b59a738f6e4c168d54d Mon Sep 17 00:00:00 2001 From: Jesus Gonzalez Date: Wed, 7 Feb 2024 20:55:50 +0100 Subject: Add 10EC5280 to bmi160_i2c ACPI IDs to allow binding on some devices "10EC5280" is used by several manufacturers like Lenovo, GPD, or AYA (and probably others) in their ACPI table as the ID for the bmi160 IMU. This means the bmi160_i2c driver won't bind to it, and the IMU is unavailable to the user. Manufacturers have been approached on several occasions to try getting a BIOS with a fixed ID, mostly without actual positive results, and since affected devices are already a few years old, this is not expected to change. This patch enables using the bmi160_i2c driver for the bmi160 IMU on these devices. Here is the relevant extract from the DSDT of a GPD Win Max 2 (AMD 6800U model) with the latest firmware 1.05 installed. GPD sees this as WONTFIX with the argument of the device working with the Windows drivers. Device (BMA2) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "10EC5280") // _HID: Hardware ID Name (_CID, "10EC5280") // _CID: Compatible ID Name (_DDN, "Accelerometer") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x0069, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2CC", 0x00, ResourceConsumer, , Exclusive, ) }) Return (RBUF) /* \_SB_.I2CC.BMA2._CRS.RBUF */ } ... } Signed-off-by: Jesus Gonzalez Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240207195549.37994-2-jesusmgh@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi160/bmi160_i2c.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/imu/bmi160/bmi160_i2c.c b/drivers/iio/imu/bmi160/bmi160_i2c.c index 81652c08e644..a081305254db 100644 --- a/drivers/iio/imu/bmi160/bmi160_i2c.c +++ b/drivers/iio/imu/bmi160/bmi160_i2c.c @@ -43,6 +43,15 @@ static const struct i2c_device_id bmi160_i2c_id[] = { MODULE_DEVICE_TABLE(i2c, bmi160_i2c_id); static const struct acpi_device_id bmi160_acpi_match[] = { + /* + * FIRMWARE BUG WORKAROUND + * Some manufacturers like GPD, Lenovo or Aya used the incorrect + * ID "10EC5280" for bmi160 in their DSDT. A fixed firmware is not + * available as of Feb 2024 after trying to work with OEMs, and + * this is not expected to change anymore since at least some of + * the affected devices are from 2021/2022. + */ + {"10EC5280", 0}, {"BMI0160", 0}, { }, }; -- cgit v1.2.3 From f2a71ebdf2312a07824fb8445267e62bc0074e56 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Mon, 5 Feb 2024 10:59:23 -0800 Subject: iio: hid-sensor-als: Assign channels dynamically Instead of assuming that every channel defined statically by als_channels[] is present, assign dynamically based on presence of the respective usage id in the descriptor. This will allow to register ALS with limited channel support. Append the timestamp as the last channel. Update available_scan_mask to specify all channels which are present. There is no intentional function changes done. Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20240205185926.3030521-2-srinivas.pandruvada@linux.intel.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-als.c | 51 ++++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index 5cd27f04b45e..b900b6ef8a9d 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -25,6 +25,7 @@ struct als_state { struct hid_sensor_hub_callbacks callbacks; struct hid_sensor_common common_attributes; struct hid_sensor_hub_attribute_info als[CHANNEL_SCAN_INDEX_MAX]; + struct iio_chan_spec channels[CHANNEL_SCAN_INDEX_MAX + 1]; struct { u32 illum[CHANNEL_SCAN_INDEX_MAX]; u64 timestamp __aligned(8); @@ -33,7 +34,15 @@ struct als_state { int scale_post_decml; int scale_precision; int value_offset; + int num_channels; s64 timestamp; + unsigned long als_scan_mask[2]; +}; + +/* The order of usage ids must match scan index starting from CHANNEL_SCAN_INDEX_INTENSITY */ +static const u32 als_usage_ids[] = { + HID_USAGE_SENSOR_LIGHT_ILLUM, + HID_USAGE_SENSOR_LIGHT_ILLUM, }; static const u32 als_sensitivity_addresses[] = { @@ -237,27 +246,38 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev, /* Parse report which is specific to an usage id*/ static int als_parse_report(struct platform_device *pdev, struct hid_sensor_hub_device *hsdev, - struct iio_chan_spec *channels, unsigned usage_id, struct als_state *st) { - int ret; + struct iio_chan_spec *channels; + int ret, index = 0; int i; - for (i = 0; i <= CHANNEL_SCAN_INDEX_ILLUM; ++i) { + channels = st->channels; + + for (i = 0; i < CHANNEL_SCAN_INDEX_MAX; ++i) { ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT, usage_id, - HID_USAGE_SENSOR_LIGHT_ILLUM, + als_usage_ids[i], &st->als[i]); if (ret < 0) - return ret; - als_adjust_channel_bit_mask(channels, i, st->als[i].size); + continue; + + channels[index] = als_channels[i]; + st->als_scan_mask[0] |= BIT(i); + als_adjust_channel_bit_mask(channels, index, st->als[i].size); + ++index; dev_dbg(&pdev->dev, "als %x:%x\n", st->als[i].index, st->als[i].report_id); } + st->num_channels = index; + /* Return success even if one usage id is present */ + if (index) + ret = 0; + st->scale_precision = hid_sensor_format_scale(usage_id, &st->als[CHANNEL_SCAN_INDEX_INTENSITY], &st->scale_pre_decml, &st->scale_post_decml); @@ -293,15 +313,7 @@ static int hid_als_probe(struct platform_device *pdev) return ret; } - indio_dev->channels = devm_kmemdup(&pdev->dev, als_channels, - sizeof(als_channels), GFP_KERNEL); - if (!indio_dev->channels) { - dev_err(&pdev->dev, "failed to duplicate channels\n"); - return -ENOMEM; - } - ret = als_parse_report(pdev, hsdev, - (struct iio_chan_spec *)indio_dev->channels, hsdev->usage, als_state); if (ret) { @@ -309,8 +321,15 @@ static int hid_als_probe(struct platform_device *pdev) return ret; } - indio_dev->num_channels = - ARRAY_SIZE(als_channels); + /* Add timestamp channel */ + als_state->channels[als_state->num_channels] = als_channels[CHANNEL_SCAN_INDEX_TIMESTAMP]; + + /* +1 for adding timestamp channel */ + indio_dev->num_channels = als_state->num_channels + 1; + + indio_dev->channels = als_state->channels; + indio_dev->available_scan_masks = als_state->als_scan_mask; + indio_dev->info = &als_info; indio_dev->name = name; indio_dev->modes = INDIO_DIRECT_MODE; -- cgit v1.2.3 From 00c45c9ef9b243cd0d48ae2bd0b8d908a9e04b2d Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Mon, 5 Feb 2024 10:59:24 -0800 Subject: iio: hid-sensor-als: Remove hardcoding of values for enums Remove hardcoding of values for enum CHANNEL_SCAN_INDEX_INTENSITY and CHANNEL_SCAN_INDEX_ILLUM. Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20240205185926.3030521-3-srinivas.pandruvada@linux.intel.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-als.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index b900b6ef8a9d..bd4cb0883121 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -14,8 +14,8 @@ #include "../common/hid-sensors/hid-sensor-trigger.h" enum { - CHANNEL_SCAN_INDEX_INTENSITY = 0, - CHANNEL_SCAN_INDEX_ILLUM = 1, + CHANNEL_SCAN_INDEX_INTENSITY, + CHANNEL_SCAN_INDEX_ILLUM, CHANNEL_SCAN_INDEX_MAX }; -- cgit v1.2.3 From 3765d426fe864e109d00aeb48f22413b896b2eb9 Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Mon, 5 Feb 2024 10:59:25 -0800 Subject: iio: hid-sensor-als: Add light color temperature support On some platforms, ambient color sensors also support light color temperature. Add support of light color temperature. Signed-off-by: Basavaraj Natikar Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20240205185926.3030521-4-srinivas.pandruvada@linux.intel.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-als.c | 21 +++++++++++++++++++++ include/linux/hid-sensor-ids.h | 1 + 2 files changed, 22 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index bd4cb0883121..f9d0071d9fa9 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -16,6 +16,7 @@ enum { CHANNEL_SCAN_INDEX_INTENSITY, CHANNEL_SCAN_INDEX_ILLUM, + CHANNEL_SCAN_INDEX_COLOR_TEMP, CHANNEL_SCAN_INDEX_MAX }; @@ -43,6 +44,7 @@ struct als_state { static const u32 als_usage_ids[] = { HID_USAGE_SENSOR_LIGHT_ILLUM, HID_USAGE_SENSOR_LIGHT_ILLUM, + HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE, }; static const u32 als_sensitivity_addresses[] = { @@ -74,6 +76,16 @@ static const struct iio_chan_spec als_channels[] = { BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), .scan_index = CHANNEL_SCAN_INDEX_ILLUM, }, + { + .type = IIO_COLORTEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS) | + BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), + .scan_index = CHANNEL_SCAN_INDEX_COLOR_TEMP, + }, IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP) }; @@ -112,6 +124,11 @@ static int als_read_raw(struct iio_dev *indio_dev, min = als_state->als[chan->scan_index].logical_minimum; address = HID_USAGE_SENSOR_LIGHT_ILLUM; break; + case CHANNEL_SCAN_INDEX_COLOR_TEMP: + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE; + break; default: report_id = -1; break; @@ -232,6 +249,10 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev, als_state->scan.illum[CHANNEL_SCAN_INDEX_ILLUM] = sample_data; ret = 0; break; + case HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE: + als_state->scan.illum[CHANNEL_SCAN_INDEX_COLOR_TEMP] = sample_data; + ret = 0; + break; case HID_USAGE_SENSOR_TIME_TIMESTAMP: als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes, *(s64 *)raw_data); diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index 13b1e65fbdcc..8af4fb3e0254 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -21,6 +21,7 @@ #define HID_USAGE_SENSOR_ALS 0x200041 #define HID_USAGE_SENSOR_DATA_LIGHT 0x2004d0 #define HID_USAGE_SENSOR_LIGHT_ILLUM 0x2004d1 +#define HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE 0x2004d2 /* PROX (200011) */ #define HID_USAGE_SENSOR_PROX 0x200011 -- cgit v1.2.3 From 2ec17b1950bb824f9a8d5f055e466d02c40eb64c Mon Sep 17 00:00:00 2001 From: Basavaraj Natikar Date: Mon, 5 Feb 2024 10:59:26 -0800 Subject: iio: hid-sensor-als: Add light chromaticity support On some platforms, ambient color sensors also support the x and y light colors, which represent the coordinates on the CIE 1931 chromaticity diagram. Add light chromaticity x and y. Signed-off-by: Basavaraj Natikar Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20240205185926.3030521-5-srinivas.pandruvada@linux.intel.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/hid-sensor-als.c | 46 ++++++++++++++++++++++++++++++++++++++ include/linux/hid-sensor-ids.h | 3 +++ 2 files changed, 49 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index f9d0071d9fa9..06580dfdfab6 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -17,6 +17,8 @@ enum { CHANNEL_SCAN_INDEX_INTENSITY, CHANNEL_SCAN_INDEX_ILLUM, CHANNEL_SCAN_INDEX_COLOR_TEMP, + CHANNEL_SCAN_INDEX_CHROMATICITY_X, + CHANNEL_SCAN_INDEX_CHROMATICITY_Y, CHANNEL_SCAN_INDEX_MAX }; @@ -45,6 +47,8 @@ static const u32 als_usage_ids[] = { HID_USAGE_SENSOR_LIGHT_ILLUM, HID_USAGE_SENSOR_LIGHT_ILLUM, HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE, + HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X, + HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y, }; static const u32 als_sensitivity_addresses[] = { @@ -86,6 +90,30 @@ static const struct iio_chan_spec als_channels[] = { BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), .scan_index = CHANNEL_SCAN_INDEX_COLOR_TEMP, }, + { + .type = IIO_CHROMATICITY, + .modified = 1, + .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS) | + BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), + .scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_X, + }, + { + .type = IIO_CHROMATICITY, + .modified = 1, + .channel2 = IIO_MOD_Y, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_SAMP_FREQ) | + BIT(IIO_CHAN_INFO_HYSTERESIS) | + BIT(IIO_CHAN_INFO_HYSTERESIS_RELATIVE), + .scan_index = CHANNEL_SCAN_INDEX_CHROMATICITY_Y, + }, IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP) }; @@ -129,6 +157,16 @@ static int als_read_raw(struct iio_dev *indio_dev, min = als_state->als[chan->scan_index].logical_minimum; address = HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE; break; + case CHANNEL_SCAN_INDEX_CHROMATICITY_X: + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X; + break; + case CHANNEL_SCAN_INDEX_CHROMATICITY_Y: + report_id = als_state->als[chan->scan_index].report_id; + min = als_state->als[chan->scan_index].logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y; + break; default: report_id = -1; break; @@ -253,6 +291,14 @@ static int als_capture_sample(struct hid_sensor_hub_device *hsdev, als_state->scan.illum[CHANNEL_SCAN_INDEX_COLOR_TEMP] = sample_data; ret = 0; break; + case HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X: + als_state->scan.illum[CHANNEL_SCAN_INDEX_CHROMATICITY_X] = sample_data; + ret = 0; + break; + case HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y: + als_state->scan.illum[CHANNEL_SCAN_INDEX_CHROMATICITY_Y] = sample_data; + ret = 0; + break; case HID_USAGE_SENSOR_TIME_TIMESTAMP: als_state->timestamp = hid_sensor_convert_timestamp(&als_state->common_attributes, *(s64 *)raw_data); diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index 8af4fb3e0254..6730ee900ee1 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -22,6 +22,9 @@ #define HID_USAGE_SENSOR_DATA_LIGHT 0x2004d0 #define HID_USAGE_SENSOR_LIGHT_ILLUM 0x2004d1 #define HID_USAGE_SENSOR_LIGHT_COLOR_TEMPERATURE 0x2004d2 +#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY 0x2004d3 +#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY_X 0x2004d4 +#define HID_USAGE_SENSOR_LIGHT_CHROMATICITY_Y 0x2004d5 /* PROX (200011) */ #define HID_USAGE_SENSOR_PROX 0x200011 -- cgit v1.2.3 From 52882c6fb16ff406b7f5330958523328ce40f248 Mon Sep 17 00:00:00 2001 From: Dimitri Fedrau Date: Wed, 14 Feb 2024 09:53:43 +0100 Subject: iio: humidity: hdc3020: switch to 16bit register defines Switch to 16bit register defines and drop the const u8 register pairs. By doing so we change the parameter of functions for reading and writing to the device. Additionally create helper functions that are aware of the new register format and apply them wherever possible. Signed-off-by: Dimitri Fedrau Link: https://lore.kernel.org/r/20240214085350.19382-2-dima.fedrau@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc3020.c | 200 +++++++++++++---------------------------- 1 file changed, 63 insertions(+), 137 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/hdc3020.c b/drivers/iio/humidity/hdc3020.c index 4e3311170725..e42efe666e22 100644 --- a/drivers/iio/humidity/hdc3020.c +++ b/drivers/iio/humidity/hdc3020.c @@ -21,26 +21,22 @@ #include -#define HDC3020_HEATER_CMD_MSB 0x30 /* shared by all heater commands */ -#define HDC3020_HEATER_ENABLE 0x6D -#define HDC3020_HEATER_DISABLE 0x66 -#define HDC3020_HEATER_CONFIG 0x6E +#define HDC3020_S_AUTO_10HZ_MOD0 0x2737 +#define HDC3020_HEATER_DISABLE 0x3066 +#define HDC3020_HEATER_ENABLE 0x306D +#define HDC3020_HEATER_CONFIG 0x306E +#define HDC3020_EXIT_AUTO 0x3093 +#define HDC3020_R_T_RH_AUTO 0xE000 +#define HDC3020_R_T_LOW_AUTO 0xE002 +#define HDC3020_R_T_HIGH_AUTO 0xE003 +#define HDC3020_R_RH_LOW_AUTO 0xE004 +#define HDC3020_R_RH_HIGH_AUTO 0xE005 #define HDC3020_READ_RETRY_TIMES 10 #define HDC3020_BUSY_DELAY_MS 10 #define HDC3020_CRC8_POLYNOMIAL 0x31 -static const u8 HDC3020_S_AUTO_10HZ_MOD0[2] = { 0x27, 0x37 }; - -static const u8 HDC3020_EXIT_AUTO[2] = { 0x30, 0x93 }; - -static const u8 HDC3020_R_T_RH_AUTO[2] = { 0xE0, 0x00 }; -static const u8 HDC3020_R_T_LOW_AUTO[2] = { 0xE0, 0x02 }; -static const u8 HDC3020_R_T_HIGH_AUTO[2] = { 0xE0, 0x03 }; -static const u8 HDC3020_R_RH_LOW_AUTO[2] = { 0xE0, 0x04 }; -static const u8 HDC3020_R_RH_HIGH_AUTO[2] = { 0xE0, 0x05 }; - struct hdc3020_data { struct i2c_client *client; /* @@ -82,7 +78,7 @@ static const struct iio_chan_spec hdc3020_channels[] = { DECLARE_CRC8_TABLE(hdc3020_crc8_table); -static int hdc3020_write_bytes(struct hdc3020_data *data, const u8 *buf, u8 len) +static int hdc3020_write_bytes(struct hdc3020_data *data, u8 *buf, u8 len) { struct i2c_client *client = data->client; struct i2c_msg msg; @@ -90,7 +86,7 @@ static int hdc3020_write_bytes(struct hdc3020_data *data, const u8 *buf, u8 len) msg.addr = client->addr; msg.flags = 0; - msg.buf = (char *)buf; + msg.buf = buf; msg.len = len; /* @@ -109,26 +105,28 @@ static int hdc3020_write_bytes(struct hdc3020_data *data, const u8 *buf, u8 len) return -ETIMEDOUT; } -static int hdc3020_read_bytes(struct hdc3020_data *data, const u8 *buf, - void *val, int len) +static +int hdc3020_read_bytes(struct hdc3020_data *data, u16 reg, u8 *buf, int len) { + u8 reg_buf[2]; int ret, cnt; struct i2c_client *client = data->client; struct i2c_msg msg[2] = { [0] = { .addr = client->addr, .flags = 0, - .buf = (char *)buf, + .buf = reg_buf, .len = 2, }, [1] = { .addr = client->addr, .flags = I2C_M_RD, - .buf = val, + .buf = buf, .len = len, }, }; + put_unaligned_be16(reg, reg_buf); /* * During the measurement process, HDC3020 will not return data. * So wait for a while and try again @@ -145,48 +143,12 @@ static int hdc3020_read_bytes(struct hdc3020_data *data, const u8 *buf, return -ETIMEDOUT; } -static int hdc3020_read_measurement(struct hdc3020_data *data, - enum iio_chan_type type, int *val) -{ - u8 crc, buf[6]; - int ret; - - ret = hdc3020_read_bytes(data, HDC3020_R_T_RH_AUTO, buf, 6); - if (ret < 0) - return ret; - - /* CRC check of the temperature measurement */ - crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); - if (crc != buf[2]) - return -EINVAL; - - /* CRC check of the relative humidity measurement */ - crc = crc8(hdc3020_crc8_table, buf + 3, 2, CRC8_INIT_VALUE); - if (crc != buf[5]) - return -EINVAL; - - if (type == IIO_TEMP) - *val = get_unaligned_be16(buf); - else if (type == IIO_HUMIDITYRELATIVE) - *val = get_unaligned_be16(&buf[3]); - else - return -EINVAL; - - return 0; -} - -/* - * After exiting the automatic measurement mode or resetting, the peak - * value will be reset to the default value - * This method is used to get the highest temp measured during automatic - * measurement - */ -static int hdc3020_read_high_peak_t(struct hdc3020_data *data, int *val) +static int hdc3020_read_be16(struct hdc3020_data *data, u16 reg) { u8 crc, buf[3]; int ret; - ret = hdc3020_read_bytes(data, HDC3020_R_T_HIGH_AUTO, buf, 3); + ret = hdc3020_read_bytes(data, reg, buf, 3); if (ret < 0) return ret; @@ -194,73 +156,43 @@ static int hdc3020_read_high_peak_t(struct hdc3020_data *data, int *val) if (crc != buf[2]) return -EINVAL; - *val = get_unaligned_be16(buf); - - return 0; + return get_unaligned_be16(buf); } -/* - * This method is used to get the lowest temp measured during automatic - * measurement - */ -static int hdc3020_read_low_peak_t(struct hdc3020_data *data, int *val) +static int hdc3020_exec_cmd(struct hdc3020_data *data, u16 reg) { - u8 crc, buf[3]; - int ret; - - ret = hdc3020_read_bytes(data, HDC3020_R_T_LOW_AUTO, buf, 3); - if (ret < 0) - return ret; - - crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); - if (crc != buf[2]) - return -EINVAL; - - *val = get_unaligned_be16(buf); + u8 reg_buf[2]; - return 0; + put_unaligned_be16(reg, reg_buf); + return hdc3020_write_bytes(data, reg_buf, 2); } -/* - * This method is used to get the highest humidity measured during automatic - * measurement - */ -static int hdc3020_read_high_peak_rh(struct hdc3020_data *data, int *val) +static int hdc3020_read_measurement(struct hdc3020_data *data, + enum iio_chan_type type, int *val) { - u8 crc, buf[3]; + u8 crc, buf[6]; int ret; - ret = hdc3020_read_bytes(data, HDC3020_R_RH_HIGH_AUTO, buf, 3); + ret = hdc3020_read_bytes(data, HDC3020_R_T_RH_AUTO, buf, 6); if (ret < 0) return ret; + /* CRC check of the temperature measurement */ crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); if (crc != buf[2]) return -EINVAL; - *val = get_unaligned_be16(buf); - - return 0; -} - -/* - * This method is used to get the lowest humidity measured during automatic - * measurement - */ -static int hdc3020_read_low_peak_rh(struct hdc3020_data *data, int *val) -{ - u8 crc, buf[3]; - int ret; - - ret = hdc3020_read_bytes(data, HDC3020_R_RH_LOW_AUTO, buf, 3); - if (ret < 0) - return ret; - - crc = crc8(hdc3020_crc8_table, buf, 2, CRC8_INIT_VALUE); - if (crc != buf[2]) + /* CRC check of the relative humidity measurement */ + crc = crc8(hdc3020_crc8_table, buf + 3, 2, CRC8_INIT_VALUE); + if (crc != buf[5]) return -EINVAL; - *val = get_unaligned_be16(buf); + if (type == IIO_TEMP) + *val = get_unaligned_be16(buf); + else if (type == IIO_HUMIDITYRELATIVE) + *val = get_unaligned_be16(&buf[3]); + else + return -EINVAL; return 0; } @@ -286,28 +218,28 @@ static int hdc3020_read_raw(struct iio_dev *indio_dev, } case IIO_CHAN_INFO_PEAK: { guard(mutex)(&data->lock); - if (chan->type == IIO_TEMP) { - ret = hdc3020_read_high_peak_t(data, val); - if (ret < 0) - return ret; - } else { - ret = hdc3020_read_high_peak_rh(data, val); - if (ret < 0) - return ret; - } + if (chan->type == IIO_TEMP) + ret = hdc3020_read_be16(data, HDC3020_R_T_HIGH_AUTO); + else + ret = hdc3020_read_be16(data, HDC3020_R_RH_HIGH_AUTO); + + if (ret < 0) + return ret; + + *val = ret; return IIO_VAL_INT; } case IIO_CHAN_INFO_TROUGH: { guard(mutex)(&data->lock); - if (chan->type == IIO_TEMP) { - ret = hdc3020_read_low_peak_t(data, val); - if (ret < 0) - return ret; - } else { - ret = hdc3020_read_low_peak_rh(data, val); - if (ret < 0) - return ret; - } + if (chan->type == IIO_TEMP) + ret = hdc3020_read_be16(data, HDC3020_R_T_LOW_AUTO); + else + ret = hdc3020_read_be16(data, HDC3020_R_RH_LOW_AUTO); + + if (ret < 0) + return ret; + + *val = ret; return IIO_VAL_INT; } case IIO_CHAN_INFO_SCALE: @@ -352,23 +284,17 @@ static int hdc3020_update_heater(struct hdc3020_data *data, int val) if (val < hdc3020_heater_vals[0] || val > hdc3020_heater_vals[2]) return -EINVAL; - buf[0] = HDC3020_HEATER_CMD_MSB; + if (!val) + hdc3020_exec_cmd(data, HDC3020_HEATER_DISABLE); - if (!val) { - buf[1] = HDC3020_HEATER_DISABLE; - return hdc3020_write_bytes(data, buf, 2); - } - - buf[1] = HDC3020_HEATER_CONFIG; + put_unaligned_be16(HDC3020_HEATER_CONFIG, buf); put_unaligned_be16(val & GENMASK(13, 0), &buf[2]); buf[4] = crc8(hdc3020_crc8_table, buf + 2, 2, CRC8_INIT_VALUE); ret = hdc3020_write_bytes(data, buf, 5); if (ret < 0) return ret; - buf[1] = HDC3020_HEATER_ENABLE; - - return hdc3020_write_bytes(data, buf, 2); + return hdc3020_exec_cmd(data, HDC3020_HEATER_ENABLE); } static int hdc3020_write_raw(struct iio_dev *indio_dev, @@ -397,7 +323,7 @@ static const struct iio_info hdc3020_info = { static void hdc3020_stop(void *data) { - hdc3020_write_bytes((struct hdc3020_data *)data, HDC3020_EXIT_AUTO, 2); + hdc3020_exec_cmd((struct hdc3020_data *)data, HDC3020_EXIT_AUTO); } static int hdc3020_probe(struct i2c_client *client) @@ -425,7 +351,7 @@ static int hdc3020_probe(struct i2c_client *client) indio_dev->channels = hdc3020_channels; indio_dev->num_channels = ARRAY_SIZE(hdc3020_channels); - ret = hdc3020_write_bytes(data, HDC3020_S_AUTO_10HZ_MOD0, 2); + ret = hdc3020_exec_cmd(data, HDC3020_S_AUTO_10HZ_MOD0); if (ret) return dev_err_probe(&client->dev, ret, "Unable to set up measurement\n"); -- cgit v1.2.3 From 3ad0e7e5f0cb4d1cb1f1fb687d10e45cabf1928c Mon Sep 17 00:00:00 2001 From: Dimitri Fedrau Date: Wed, 14 Feb 2024 09:53:45 +0100 Subject: iio: humidity: hdc3020: add threshold events support Add threshold events support for temperature and relative humidity. To enable them the higher and lower threshold registers must be programmed and the higher threshold must be greater then or equal to the lower threshold. Otherwise the event is disabled. Invalid hysteresis values are ignored by the device. There is no further configuration possible. Tested by setting thresholds/hysteresis and turning the heater on/off. Used iio_event_monitor in tools/iio to catch events while constantly displaying temperature and humidity values. Signed-off-by: Dimitri Fedrau Tested-by: Javier Carrasco Link: https://lore.kernel.org/r/20240214085350.19382-4-dima.fedrau@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc3020.c | 247 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 247 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/humidity/hdc3020.c b/drivers/iio/humidity/hdc3020.c index e42efe666e22..11ede97a31d7 100644 --- a/drivers/iio/humidity/hdc3020.c +++ b/drivers/iio/humidity/hdc3020.c @@ -5,38 +5,67 @@ * * Copyright (C) 2023 * + * Copyright (C) 2024 Liebherr-Electronics and Drives GmbH + * * Datasheet: https://www.ti.com/lit/ds/symlink/hdc3020.pdf */ +#include #include #include #include #include #include #include +#include #include #include +#include #include +#include #include #define HDC3020_S_AUTO_10HZ_MOD0 0x2737 +#define HDC3020_S_STATUS 0x3041 #define HDC3020_HEATER_DISABLE 0x3066 #define HDC3020_HEATER_ENABLE 0x306D #define HDC3020_HEATER_CONFIG 0x306E #define HDC3020_EXIT_AUTO 0x3093 +#define HDC3020_S_T_RH_THRESH_LOW 0x6100 +#define HDC3020_S_T_RH_THRESH_LOW_CLR 0x610B +#define HDC3020_S_T_RH_THRESH_HIGH_CLR 0x6116 +#define HDC3020_S_T_RH_THRESH_HIGH 0x611D #define HDC3020_R_T_RH_AUTO 0xE000 #define HDC3020_R_T_LOW_AUTO 0xE002 #define HDC3020_R_T_HIGH_AUTO 0xE003 #define HDC3020_R_RH_LOW_AUTO 0xE004 #define HDC3020_R_RH_HIGH_AUTO 0xE005 +#define HDC3020_R_T_RH_THRESH_LOW 0xE102 +#define HDC3020_R_T_RH_THRESH_LOW_CLR 0xE109 +#define HDC3020_R_T_RH_THRESH_HIGH_CLR 0xE114 +#define HDC3020_R_T_RH_THRESH_HIGH 0xE11F +#define HDC3020_R_STATUS 0xF32D + +#define HDC3020_THRESH_TEMP_MASK GENMASK(8, 0) +#define HDC3020_THRESH_TEMP_TRUNC_SHIFT 7 +#define HDC3020_THRESH_HUM_MASK GENMASK(15, 9) +#define HDC3020_THRESH_HUM_TRUNC_SHIFT 9 + +#define HDC3020_STATUS_T_LOW_ALERT BIT(6) +#define HDC3020_STATUS_T_HIGH_ALERT BIT(7) +#define HDC3020_STATUS_RH_LOW_ALERT BIT(8) +#define HDC3020_STATUS_RH_HIGH_ALERT BIT(9) #define HDC3020_READ_RETRY_TIMES 10 #define HDC3020_BUSY_DELAY_MS 10 #define HDC3020_CRC8_POLYNOMIAL 0x31 +#define HDC3020_MIN_TEMP -40 +#define HDC3020_MAX_TEMP 125 + struct hdc3020_data { struct i2c_client *client; /* @@ -50,18 +79,37 @@ struct hdc3020_data { static const int hdc3020_heater_vals[] = {0, 1, 0x3FFF}; +static const struct iio_event_spec hdc3020_t_rh_event[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_HYSTERESIS), + }, + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_HYSTERESIS), + }, +}; + static const struct iio_chan_spec hdc3020_channels[] = { { .type = IIO_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_PEAK) | BIT(IIO_CHAN_INFO_TROUGH) | BIT(IIO_CHAN_INFO_OFFSET), + .event_spec = hdc3020_t_rh_event, + .num_event_specs = ARRAY_SIZE(hdc3020_t_rh_event), }, { .type = IIO_HUMIDITYRELATIVE, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_PEAK) | BIT(IIO_CHAN_INFO_TROUGH), + .event_spec = hdc3020_t_rh_event, + .num_event_specs = ARRAY_SIZE(hdc3020_t_rh_event), }, { /* @@ -315,10 +363,192 @@ static int hdc3020_write_raw(struct iio_dev *indio_dev, return -EINVAL; } +static int hdc3020_write_thresh(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct hdc3020_data *data = iio_priv(indio_dev); + u8 buf[5]; + u64 tmp; + u16 reg; + int ret; + + /* Supported temperature range is from –40 to 125 degree celsius */ + if (val < HDC3020_MIN_TEMP || val > HDC3020_MAX_TEMP) + return -EINVAL; + + /* Select threshold register */ + if (info == IIO_EV_INFO_VALUE) { + if (dir == IIO_EV_DIR_RISING) + reg = HDC3020_S_T_RH_THRESH_HIGH; + else + reg = HDC3020_S_T_RH_THRESH_LOW; + } else { + if (dir == IIO_EV_DIR_RISING) + reg = HDC3020_S_T_RH_THRESH_HIGH_CLR; + else + reg = HDC3020_S_T_RH_THRESH_LOW_CLR; + } + + guard(mutex)(&data->lock); + ret = hdc3020_read_be16(data, reg); + if (ret < 0) + return ret; + + switch (chan->type) { + case IIO_TEMP: + /* + * Calculate temperature threshold, shift it down to get the + * truncated threshold representation in the 9LSBs while keeping + * the current humidity threshold in the 7 MSBs. + */ + tmp = ((u64)(((val + 45) * MICRO) + val2)) * 65535ULL; + tmp = div_u64(tmp, MICRO * 175); + val = tmp >> HDC3020_THRESH_TEMP_TRUNC_SHIFT; + val = FIELD_PREP(HDC3020_THRESH_TEMP_MASK, val); + val |= (FIELD_GET(HDC3020_THRESH_HUM_MASK, ret) << + HDC3020_THRESH_HUM_TRUNC_SHIFT); + break; + case IIO_HUMIDITYRELATIVE: + /* + * Calculate humidity threshold, shift it down and up to get the + * truncated threshold representation in the 7MSBs while keeping + * the current temperature threshold in the 9 LSBs. + */ + tmp = ((u64)((val * MICRO) + val2)) * 65535ULL; + tmp = div_u64(tmp, MICRO * 100); + val = tmp >> HDC3020_THRESH_HUM_TRUNC_SHIFT; + val = FIELD_PREP(HDC3020_THRESH_HUM_MASK, val); + val |= FIELD_GET(HDC3020_THRESH_TEMP_MASK, ret); + break; + default: + return -EOPNOTSUPP; + } + + put_unaligned_be16(reg, buf); + put_unaligned_be16(val, buf + 2); + buf[4] = crc8(hdc3020_crc8_table, buf + 2, 2, CRC8_INIT_VALUE); + return hdc3020_write_bytes(data, buf, 5); +} + +static int hdc3020_read_thresh(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct hdc3020_data *data = iio_priv(indio_dev); + u16 reg; + int ret; + + /* Select threshold register */ + if (info == IIO_EV_INFO_VALUE) { + if (dir == IIO_EV_DIR_RISING) + reg = HDC3020_R_T_RH_THRESH_HIGH; + else + reg = HDC3020_R_T_RH_THRESH_LOW; + } else { + if (dir == IIO_EV_DIR_RISING) + reg = HDC3020_R_T_RH_THRESH_HIGH_CLR; + else + reg = HDC3020_R_T_RH_THRESH_LOW_CLR; + } + + guard(mutex)(&data->lock); + ret = hdc3020_read_be16(data, reg); + if (ret < 0) + return ret; + + switch (chan->type) { + case IIO_TEMP: + /* + * Get the temperature threshold from 9 LSBs, shift them to get + * the truncated temperature threshold representation and + * calculate the threshold according to the formula in the + * datasheet. + */ + *val = FIELD_GET(HDC3020_THRESH_TEMP_MASK, ret); + *val = *val << HDC3020_THRESH_TEMP_TRUNC_SHIFT; + *val = -2949075 + (175 * (*val)); + *val2 = 65535; + return IIO_VAL_FRACTIONAL; + case IIO_HUMIDITYRELATIVE: + /* + * Get the humidity threshold from 7 MSBs, shift them to get the + * truncated humidity threshold representation and calculate the + * threshold according to the formula in the datasheet. + */ + *val = FIELD_GET(HDC3020_THRESH_HUM_MASK, ret); + *val = (*val << HDC3020_THRESH_HUM_TRUNC_SHIFT) * 100; + *val2 = 65535; + return IIO_VAL_FRACTIONAL; + default: + return -EOPNOTSUPP; + } +} + +static irqreturn_t hdc3020_interrupt_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct hdc3020_data *data; + s64 time; + int ret; + + data = iio_priv(indio_dev); + ret = hdc3020_read_be16(data, HDC3020_R_STATUS); + if (ret < 0) + return IRQ_HANDLED; + + if (!(ret & (HDC3020_STATUS_T_HIGH_ALERT | HDC3020_STATUS_T_LOW_ALERT | + HDC3020_STATUS_RH_HIGH_ALERT | HDC3020_STATUS_RH_LOW_ALERT))) + return IRQ_NONE; + + time = iio_get_time_ns(indio_dev); + if (ret & HDC3020_STATUS_T_HIGH_ALERT) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_TEMP, 0, + IIO_NO_MOD, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + time); + + if (ret & HDC3020_STATUS_T_LOW_ALERT) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_TEMP, 0, + IIO_NO_MOD, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_FALLING), + time); + + if (ret & HDC3020_STATUS_RH_HIGH_ALERT) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_HUMIDITYRELATIVE, 0, + IIO_NO_MOD, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + time); + + if (ret & HDC3020_STATUS_RH_LOW_ALERT) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_HUMIDITYRELATIVE, 0, + IIO_NO_MOD, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_FALLING), + time); + + return IRQ_HANDLED; +} + static const struct iio_info hdc3020_info = { .read_raw = hdc3020_read_raw, .write_raw = hdc3020_write_raw, .read_avail = hdc3020_read_available, + .read_event_value = hdc3020_read_thresh, + .write_event_value = hdc3020_write_thresh, }; static void hdc3020_stop(void *data) @@ -350,6 +580,23 @@ static int hdc3020_probe(struct i2c_client *client) indio_dev->info = &hdc3020_info; indio_dev->channels = hdc3020_channels; indio_dev->num_channels = ARRAY_SIZE(hdc3020_channels); + if (client->irq) { + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, hdc3020_interrupt_handler, + IRQF_ONESHOT, "hdc3020", + indio_dev); + if (ret) + return dev_err_probe(&client->dev, ret, + "Failed to request IRQ\n"); + + /* + * The alert output is activated by default upon power up, + * hardware reset, and soft reset. Clear the status register. + */ + ret = hdc3020_exec_cmd(data, HDC3020_S_STATUS); + if (ret) + return ret; + } ret = hdc3020_exec_cmd(data, HDC3020_S_AUTO_10HZ_MOD0); if (ret) -- cgit v1.2.3 From c20445be92f79bf1abd2a8c31d566697de9e68b0 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Sun, 4 Feb 2024 13:14:05 -0300 Subject: fpga: dfl: make dfl_bus_type const Now that the driver core can properly handle constant struct bus_type, move the dfl_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: Ricardo B. Marliere Reviewed-by: Greg Kroah-Hartman Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20240204-bus_cleanup-fpga-v1-1-dae8b5bf7220@marliere.net Signed-off-by: Xu Yilun --- drivers/fpga/dfl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c index e6d12fbab653..094ee97ea26c 100644 --- a/drivers/fpga/dfl.c +++ b/drivers/fpga/dfl.c @@ -327,7 +327,7 @@ static struct attribute *dfl_dev_attrs[] = { }; ATTRIBUTE_GROUPS(dfl_dev); -static struct bus_type dfl_bus_type = { +static const struct bus_type dfl_bus_type = { .name = "dfl", .match = dfl_bus_match, .probe = dfl_bus_probe, -- cgit v1.2.3 From b1a91ca25f15b6d7b311de4465854a5981dee3d3 Mon Sep 17 00:00:00 2001 From: Marco Pagani Date: Thu, 1 Feb 2024 16:57:12 +0100 Subject: fpga: remove redundant checks for bridge ops Commit 0d70af3c2530 ("fpga: bridge: Use standard dev_release for class driver") introduced a check in fpga_bridge_register() that prevents registering a bridge without ops, making checking on every call redundant. Signed-off-by: Marco Pagani Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20240201155713.82898-1-marpagan@redhat.com Signed-off-by: Xu Yilun --- drivers/fpga/fpga-bridge.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c index a024be2b84e2..79c473b3c7c3 100644 --- a/drivers/fpga/fpga-bridge.c +++ b/drivers/fpga/fpga-bridge.c @@ -30,7 +30,7 @@ int fpga_bridge_enable(struct fpga_bridge *bridge) { dev_dbg(&bridge->dev, "enable\n"); - if (bridge->br_ops && bridge->br_ops->enable_set) + if (bridge->br_ops->enable_set) return bridge->br_ops->enable_set(bridge, 1); return 0; @@ -48,7 +48,7 @@ int fpga_bridge_disable(struct fpga_bridge *bridge) { dev_dbg(&bridge->dev, "disable\n"); - if (bridge->br_ops && bridge->br_ops->enable_set) + if (bridge->br_ops->enable_set) return bridge->br_ops->enable_set(bridge, 0); return 0; @@ -296,7 +296,7 @@ static ssize_t state_show(struct device *dev, struct fpga_bridge *bridge = to_fpga_bridge(dev); int state = 1; - if (bridge->br_ops && bridge->br_ops->enable_show) { + if (bridge->br_ops->enable_show) { state = bridge->br_ops->enable_show(bridge); if (state < 0) return state; @@ -401,7 +401,7 @@ void fpga_bridge_unregister(struct fpga_bridge *bridge) * If the low level driver provides a method for putting bridge into * a desired state upon unregister, do it. */ - if (bridge->br_ops && bridge->br_ops->fpga_bridge_remove) + if (bridge->br_ops->fpga_bridge_remove) bridge->br_ops->fpga_bridge_remove(bridge); device_unregister(&bridge->dev); -- cgit v1.2.3 From 57a9e5053c7c51c0fbf152b36ca74b997da2f77f Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 5 Feb 2024 18:04:36 +0000 Subject: comedi: remove redundant assignment to variable range The variable range is being initialized with a value that is never read, it is being re-assigned later on. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/comedi/drivers/das08.c:180:2: warning: Value stored to 'range' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Reviewed-by: Ian Abbott Link: https://lore.kernel.org/r/20240205180436.1841706-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/comedi/drivers/das08.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/comedi/drivers/das08.c b/drivers/comedi/drivers/das08.c index 5d5b9174f88a..49944ce1f813 100644 --- a/drivers/comedi/drivers/das08.c +++ b/drivers/comedi/drivers/das08.c @@ -177,7 +177,6 @@ static int das08_ai_insn_read(struct comedi_device *dev, int ret; chan = CR_CHAN(insn->chanspec); - range = CR_RANGE(insn->chanspec); /* clear crap */ inb(dev->iobase + DAS08_AI_LSB_REG); -- cgit v1.2.3 From d0fc93f462b93983b73815e30c478a8d64d0ef68 Mon Sep 17 00:00:00 2001 From: Dawei Li Date: Wed, 31 Jan 2024 11:30:28 +0800 Subject: misc: eeprom/idt_89hpesx: Convert data structures to LE explicitly Kernel test robot reports following sparse warnings: >> drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned short [addressable] [assigned] [usertype] memaddr @@ got restricted __le16 [usertype] @@ drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: expected unsigned short [addressable] [assigned] [usertype] memaddr drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: restricted __le16 [usertype] ..... For data structures needs cpu_to_le* conversion, their prototype need to be declared with __le* explicitly. Declare data structures to __le* explicitly to address the issue: - struct idt_eeprom_seq::memaddr - struct idt_csr_seq::csraddr - struct idt_csr_seq::data Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202401261250.b07Yt30Z-lkp@intel.com/ Signed-off-by: Dawei Li Reviewed-by: Serge Semin Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20240131033028.3099156-1-dawei.li@shingroup.cn Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/idt_89hpesx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c index d807d08e2614..327afb866b21 100644 --- a/drivers/misc/eeprom/idt_89hpesx.c +++ b/drivers/misc/eeprom/idt_89hpesx.c @@ -129,7 +129,7 @@ struct idt_smb_seq { struct idt_eeprom_seq { u8 cmd; u8 eeaddr; - u16 memaddr; + __le16 memaddr; u8 data; } __packed; @@ -141,8 +141,8 @@ struct idt_eeprom_seq { */ struct idt_csr_seq { u8 cmd; - u16 csraddr; - u32 data; + __le16 csraddr; + __le32 data; } __packed; /* -- cgit v1.2.3 From bb76cc45dcdfcd962a5994b8fe19ab74fc6c3c3a Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Mon, 12 Feb 2024 13:20:09 +0200 Subject: iio: gts-helper: Fix division loop The loop based 64bit division may run for a long time when dividend is a lot bigger than the divider. Replace the division loop by the div64_u64() which implementation may be significantly faster. Tested-by: Subhajit Ghosh Signed-off-by: Matti Vaittinen Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers") Link: https://lore.kernel.org/r/Zcn-6e-0-nh2WcfU@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-gts-helper.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-gts-helper.c b/drivers/iio/industrialio-gts-helper.c index 7653261d2dc2..b51eb6cb766f 100644 --- a/drivers/iio/industrialio-gts-helper.c +++ b/drivers/iio/industrialio-gts-helper.c @@ -34,24 +34,11 @@ static int iio_gts_get_gain(const u64 max, const u64 scale) { u64 full = max; - int tmp = 1; if (scale > full || !scale) return -EINVAL; - if (U64_MAX - full < scale) { - /* Risk of overflow */ - if (full - scale < scale) - return 1; - - full -= scale; - tmp++; - } - - while (full > scale * (u64)tmp) - tmp++; - - return tmp; + return div64_u64(full, scale); } /** -- cgit v1.2.3 From 4b0b159a194f6f2dd967532951474c0b6bb2b456 Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Sat, 10 Feb 2024 21:57:15 +0100 Subject: of: property: add device link support for io-backends Add support for creating device links out of more DT properties. Signed-off-by: Olivier Moysan Acked-by: Rob Herring Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240210-iio-backend-v11-3-f5242a5fb42a@analog.com Signed-off-by: Jonathan Cameron --- drivers/of/property.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/of/property.c b/drivers/of/property.c index 641a40cf5cf3..ec914e4516d7 100644 --- a/drivers/of/property.c +++ b/drivers/of/property.c @@ -1245,6 +1245,7 @@ DEFINE_SIMPLE_PROP(interconnects, "interconnects", "#interconnect-cells") DEFINE_SIMPLE_PROP(iommus, "iommus", "#iommu-cells") DEFINE_SIMPLE_PROP(mboxes, "mboxes", "#mbox-cells") DEFINE_SIMPLE_PROP(io_channels, "io-channel", "#io-channel-cells") +DEFINE_SIMPLE_PROP(io_backends, "io-backends", "#io-backend-cells") DEFINE_SIMPLE_PROP(interrupt_parent, "interrupt-parent", NULL) DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells") DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells") @@ -1335,6 +1336,7 @@ static const struct supplier_bindings of_supplier_bindings[] = { { .parse_prop = parse_iommu_maps, .optional = true, }, { .parse_prop = parse_mboxes, }, { .parse_prop = parse_io_channels, }, + { .parse_prop = parse_io_backends, }, { .parse_prop = parse_interrupt_parent, }, { .parse_prop = parse_dmas, .optional = true, }, { .parse_prop = parse_power_domains, }, -- cgit v1.2.3 From 9c446288d7b31402adb454535cb2c3cbdb55bb88 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Sat, 10 Feb 2024 21:57:16 +0100 Subject: iio: buffer-dmaengine: export buffer alloc and free functions Export iio_dmaengine_buffer_free() and iio_dmaengine_buffer_alloc(). This is in preparation of introducing IIO backends support. This will allow us to allocate a buffer and control it's lifetime from a device different from the one holding the DMA firmware properties. Effectively, in this case the struct device holding the firmware information about the DMA channels is not the same as iio_dev->dev.parent (typical case). While at it, namespace the buffer-dmaengine exports and update the current user of these buffers. Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240210-iio-backend-v11-4-f5242a5fb42a@analog.com Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron --- drivers/iio/adc/adi-axi-adc.c | 1 + drivers/iio/buffer/industrialio-buffer-dmaengine.c | 8 +++++--- include/linux/iio/buffer-dmaengine.h | 3 +++ 3 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c index c247ff1541d2..0f21d1d98b9f 100644 --- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -447,3 +447,4 @@ module_platform_driver(adi_axi_adc_driver); MODULE_AUTHOR("Michael Hennerich "); MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(IIO_DMAENGINE_BUFFER); diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c index 45fe7d0d42ee..a18c1da292af 100644 --- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c +++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c @@ -159,7 +159,7 @@ static const struct iio_dev_attr *iio_dmaengine_buffer_attrs[] = { * Once done using the buffer iio_dmaengine_buffer_free() should be used to * release it. */ -static struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, +struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, const char *channel) { struct dmaengine_buffer *dmaengine_buffer; @@ -210,6 +210,7 @@ err_free: kfree(dmaengine_buffer); return ERR_PTR(ret); } +EXPORT_SYMBOL_NS_GPL(iio_dmaengine_buffer_alloc, IIO_DMAENGINE_BUFFER); /** * iio_dmaengine_buffer_free() - Free dmaengine buffer @@ -217,7 +218,7 @@ err_free: * * Frees a buffer previously allocated with iio_dmaengine_buffer_alloc(). */ -static void iio_dmaengine_buffer_free(struct iio_buffer *buffer) +void iio_dmaengine_buffer_free(struct iio_buffer *buffer) { struct dmaengine_buffer *dmaengine_buffer = iio_buffer_to_dmaengine_buffer(buffer); @@ -227,6 +228,7 @@ static void iio_dmaengine_buffer_free(struct iio_buffer *buffer) iio_buffer_put(buffer); } +EXPORT_SYMBOL_NS_GPL(iio_dmaengine_buffer_free, IIO_DMAENGINE_BUFFER); static void __devm_iio_dmaengine_buffer_free(void *buffer) { @@ -287,7 +289,7 @@ int devm_iio_dmaengine_buffer_setup(struct device *dev, return iio_device_attach_buffer(indio_dev, buffer); } -EXPORT_SYMBOL_GPL(devm_iio_dmaengine_buffer_setup); +EXPORT_SYMBOL_NS_GPL(devm_iio_dmaengine_buffer_setup, IIO_DMAENGINE_BUFFER); MODULE_AUTHOR("Lars-Peter Clausen "); MODULE_DESCRIPTION("DMA buffer for the IIO framework"); diff --git a/include/linux/iio/buffer-dmaengine.h b/include/linux/iio/buffer-dmaengine.h index 5c355be89814..cbb8ba957fad 100644 --- a/include/linux/iio/buffer-dmaengine.h +++ b/include/linux/iio/buffer-dmaengine.h @@ -10,6 +10,9 @@ struct iio_dev; struct device; +struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, + const char *channel); +void iio_dmaengine_buffer_free(struct iio_buffer *buffer); int devm_iio_dmaengine_buffer_setup(struct device *dev, struct iio_dev *indio_dev, const char *channel); -- cgit v1.2.3 From 1a97905d3e48ebe79a06d16143fbfa427c56ce5f Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Sat, 10 Feb 2024 21:57:17 +0100 Subject: iio: add the IIO backend framework This is a Framework to handle complex IIO aggregate devices. The typical architecture is to have one device as the frontend device which can be "linked" against one or multiple backend devices. All the IIO and userspace interface is expected to be registers/managed by the frontend device which will callback into the backends when needed (to get/set some configuration that it does not directly control). The basic framework interface is pretty simple: - Backends should register themselves with @devm_iio_backend_register() - Frontend devices should get backends with @devm_iio_backend_get() Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240210-iio-backend-v11-5-f5242a5fb42a@analog.com Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron --- MAINTAINERS | 8 + drivers/iio/Kconfig | 9 + drivers/iio/Makefile | 1 + drivers/iio/industrialio-backend.c | 418 +++++++++++++++++++++++++++++++++++++ include/linux/iio/backend.h | 72 +++++++ 5 files changed, 508 insertions(+) create mode 100644 drivers/iio/industrialio-backend.c create mode 100644 include/linux/iio/backend.h (limited to 'drivers') diff --git a/MAINTAINERS b/MAINTAINERS index bc1e236f2184..6add3fde252d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10391,6 +10391,14 @@ L: linux-media@vger.kernel.org S: Maintained F: drivers/media/rc/iguanair.c +IIO BACKEND FRAMEWORK +M: Nuno Sa +R: Olivier Moysan +L: linux-iio@vger.kernel.org +S: Maintained +F: drivers/iio/industrialio-backend.c +F: include/linux/iio/backend.h + IIO DIGITAL POTENTIOMETER DAC M: Peter Rosin L: linux-iio@vger.kernel.org diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 52eb46ef84c1..9c351ffc7bed 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -71,6 +71,15 @@ config IIO_TRIGGERED_EVENT help Provides helper functions for setting up triggered events. +config IIO_BACKEND + tristate + help + Framework to handle complex IIO aggregate devices. The typical + architecture that can make use of this framework is to have one + device as the frontend device which can be "linked" against one or + multiple backend devices. The framework then makes it easy to get + and control such backend devices. + source "drivers/iio/accel/Kconfig" source "drivers/iio/adc/Kconfig" source "drivers/iio/addac/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index 9622347a1c1b..0ba0e1521ba4 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_IIO_GTS_HELPER) += industrialio-gts-helper.o obj-$(CONFIG_IIO_SW_DEVICE) += industrialio-sw-device.o obj-$(CONFIG_IIO_SW_TRIGGER) += industrialio-sw-trigger.o obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o +obj-$(CONFIG_IIO_BACKEND) += industrialio-backend.o obj-y += accel/ obj-y += adc/ diff --git a/drivers/iio/industrialio-backend.c b/drivers/iio/industrialio-backend.c new file mode 100644 index 000000000000..2fea2bbbe47f --- /dev/null +++ b/drivers/iio/industrialio-backend.c @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Framework to handle complex IIO aggregate devices. + * + * The typical architecture is to have one device as the frontend device which + * can be "linked" against one or multiple backend devices. All the IIO and + * userspace interface is expected to be registers/managed by the frontend + * device which will callback into the backends when needed (to get/set some + * configuration that it does not directly control). + * + * ------------------------------------------------------- + * ------------------ | ------------ ------------ ------- FPGA| + * | ADC |------------------------| | ADC CORE |---------| DMA CORE |------| RAM | | + * | (Frontend/IIO) | Serial Data (eg: LVDS) | |(backend) |---------| |------| | | + * | |------------------------| ------------ ------------ ------- | + * ------------------ ------------------------------------------------------- + * + * The framework interface is pretty simple: + * - Backends should register themselves with devm_iio_backend_register() + * - Frontend devices should get backends with devm_iio_backend_get() + * + * Also to note that the primary target for this framework are converters like + * ADC/DACs so iio_backend_ops will have some operations typical of converter + * devices. On top of that, this is "generic" for all IIO which means any kind + * of device can make use of the framework. That said, If the iio_backend_ops + * struct begins to grow out of control, we can always refactor things so that + * the industrialio-backend.c is only left with the really generic stuff. Then, + * we can build on top of it depending on the needs. + * + * Copyright (C) 2023-2024 Analog Devices Inc. + */ +#define dev_fmt(fmt) "iio-backend: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +struct iio_backend { + struct list_head entry; + const struct iio_backend_ops *ops; + struct device *dev; + struct module *owner; + void *priv; +}; + +/* + * Helper struct for requesting buffers. This ensures that we have all data + * that we need to free the buffer in a device managed action. + */ +struct iio_backend_buffer_pair { + struct iio_backend *back; + struct iio_buffer *buffer; +}; + +static LIST_HEAD(iio_back_list); +static DEFINE_MUTEX(iio_back_lock); + +/* + * Helper macros to call backend ops. Makes sure the option is supported. + */ +#define iio_backend_check_op(back, op) ({ \ + struct iio_backend *____back = back; \ + int ____ret = 0; \ + \ + if (!____back->ops->op) \ + ____ret = -EOPNOTSUPP; \ + \ + ____ret; \ +}) + +#define iio_backend_op_call(back, op, args...) ({ \ + struct iio_backend *__back = back; \ + int __ret; \ + \ + __ret = iio_backend_check_op(__back, op); \ + if (!__ret) \ + __ret = __back->ops->op(__back, ##args); \ + \ + __ret; \ +}) + +#define iio_backend_ptr_op_call(back, op, args...) ({ \ + struct iio_backend *__back = back; \ + void *ptr_err; \ + int __ret; \ + \ + __ret = iio_backend_check_op(__back, op); \ + if (__ret) \ + ptr_err = ERR_PTR(__ret); \ + else \ + ptr_err = __back->ops->op(__back, ##args); \ + \ + ptr_err; \ +}) + +#define iio_backend_void_op_call(back, op, args...) { \ + struct iio_backend *__back = back; \ + int __ret; \ + \ + __ret = iio_backend_check_op(__back, op); \ + if (!__ret) \ + __back->ops->op(__back, ##args); \ +} + +/** + * iio_backend_chan_enable - Enable a backend channel + * @back: Backend device + * @chan: Channel number + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int iio_backend_chan_enable(struct iio_backend *back, unsigned int chan) +{ + return iio_backend_op_call(back, chan_enable, chan); +} +EXPORT_SYMBOL_NS_GPL(iio_backend_chan_enable, IIO_BACKEND); + +/** + * iio_backend_chan_disable - Disable a backend channel + * @back: Backend device + * @chan: Channel number + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int iio_backend_chan_disable(struct iio_backend *back, unsigned int chan) +{ + return iio_backend_op_call(back, chan_disable, chan); +} +EXPORT_SYMBOL_NS_GPL(iio_backend_chan_disable, IIO_BACKEND); + +static void __iio_backend_disable(void *back) +{ + iio_backend_void_op_call(back, disable); +} + +/** + * devm_iio_backend_enable - Device managed backend enable + * @dev: Consumer device for the backend + * @back: Backend device + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int devm_iio_backend_enable(struct device *dev, struct iio_backend *back) +{ + int ret; + + ret = iio_backend_op_call(back, enable); + if (ret) + return ret; + + return devm_add_action_or_reset(dev, __iio_backend_disable, back); +} +EXPORT_SYMBOL_NS_GPL(devm_iio_backend_enable, IIO_BACKEND); + +/** + * iio_backend_data_format_set - Configure the channel data format + * @back: Backend device + * @chan: Channel number + * @data: Data format + * + * Properly configure a channel with respect to the expected data format. A + * @struct iio_backend_data_fmt must be passed with the settings. + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int iio_backend_data_format_set(struct iio_backend *back, unsigned int chan, + const struct iio_backend_data_fmt *data) +{ + if (!data || data->type >= IIO_BACKEND_DATA_TYPE_MAX) + return -EINVAL; + + return iio_backend_op_call(back, data_format_set, chan, data); +} +EXPORT_SYMBOL_NS_GPL(iio_backend_data_format_set, IIO_BACKEND); + +static void iio_backend_free_buffer(void *arg) +{ + struct iio_backend_buffer_pair *pair = arg; + + iio_backend_void_op_call(pair->back, free_buffer, pair->buffer); +} + +/** + * devm_iio_backend_request_buffer - Device managed buffer request + * @dev: Consumer device for the backend + * @back: Backend device + * @indio_dev: IIO device + * + * Request an IIO buffer from the backend. The type of the buffer (typically + * INDIO_BUFFER_HARDWARE) is up to the backend to decide. This is because, + * normally, the backend dictates what kind of buffering we can get. + * + * The backend .free_buffer() hooks is automatically called on @dev detach. + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int devm_iio_backend_request_buffer(struct device *dev, + struct iio_backend *back, + struct iio_dev *indio_dev) +{ + struct iio_backend_buffer_pair *pair; + struct iio_buffer *buffer; + + pair = devm_kzalloc(dev, sizeof(*pair), GFP_KERNEL); + if (!pair) + return -ENOMEM; + + buffer = iio_backend_ptr_op_call(back, request_buffer, indio_dev); + if (IS_ERR(buffer)) + return PTR_ERR(buffer); + + /* weak reference should be all what we need */ + pair->back = back; + pair->buffer = buffer; + + return devm_add_action_or_reset(dev, iio_backend_free_buffer, pair); +} +EXPORT_SYMBOL_NS_GPL(devm_iio_backend_request_buffer, IIO_BACKEND); + +static void iio_backend_release(void *arg) +{ + struct iio_backend *back = arg; + + module_put(back->owner); +} + +static int __devm_iio_backend_get(struct device *dev, struct iio_backend *back) +{ + struct device_link *link; + int ret; + + /* + * Make sure the provider cannot be unloaded before the consumer module. + * Note that device_links would still guarantee that nothing is + * accessible (and breaks) but this makes it explicit that the consumer + * module must be also unloaded. + */ + if (!try_module_get(back->owner)) + return dev_err_probe(dev, -ENODEV, + "Cannot get module reference\n"); + + ret = devm_add_action_or_reset(dev, iio_backend_release, back); + if (ret) + return ret; + + link = device_link_add(dev, back->dev, DL_FLAG_AUTOREMOVE_CONSUMER); + if (!link) + return dev_err_probe(dev, -EINVAL, + "Could not link to supplier(%s)\n", + dev_name(back->dev)); + + dev_dbg(dev, "Found backend(%s) device\n", dev_name(back->dev)); + + return 0; +} + +/** + * devm_iio_backend_get - Device managed backend device get + * @dev: Consumer device for the backend + * @name: Backend name + * + * Get's the backend associated with @dev. + * + * RETURNS: + * A backend pointer, negative error pointer otherwise. + */ +struct iio_backend *devm_iio_backend_get(struct device *dev, const char *name) +{ + struct fwnode_handle *fwnode; + struct iio_backend *back; + unsigned int index; + int ret; + + if (name) { + ret = device_property_match_string(dev, "io-backend-names", + name); + if (ret < 0) + return ERR_PTR(ret); + index = ret; + } else { + index = 0; + } + + fwnode = fwnode_find_reference(dev_fwnode(dev), "io-backends", index); + if (IS_ERR(fwnode)) { + dev_err_probe(dev, PTR_ERR(fwnode), + "Cannot get Firmware reference\n"); + return ERR_CAST(fwnode); + } + + guard(mutex)(&iio_back_lock); + list_for_each_entry(back, &iio_back_list, entry) { + if (!device_match_fwnode(back->dev, fwnode)) + continue; + + fwnode_handle_put(fwnode); + ret = __devm_iio_backend_get(dev, back); + if (ret) + return ERR_PTR(ret); + + return back; + } + + fwnode_handle_put(fwnode); + return ERR_PTR(-EPROBE_DEFER); +} +EXPORT_SYMBOL_NS_GPL(devm_iio_backend_get, IIO_BACKEND); + +/** + * __devm_iio_backend_get_from_fwnode_lookup - Device managed fwnode backend device get + * @dev: Consumer device for the backend + * @fwnode: Firmware node of the backend device + * + * Search the backend list for a device matching @fwnode. + * This API should not be used and it's only present for preventing the first + * user of this framework to break it's DT ABI. + * + * RETURNS: + * A backend pointer, negative error pointer otherwise. + */ +struct iio_backend * +__devm_iio_backend_get_from_fwnode_lookup(struct device *dev, + struct fwnode_handle *fwnode) +{ + struct iio_backend *back; + int ret; + + guard(mutex)(&iio_back_lock); + list_for_each_entry(back, &iio_back_list, entry) { + if (!device_match_fwnode(back->dev, fwnode)) + continue; + + ret = __devm_iio_backend_get(dev, back); + if (ret) + return ERR_PTR(ret); + + return back; + } + + return ERR_PTR(-EPROBE_DEFER); +} +EXPORT_SYMBOL_NS_GPL(__devm_iio_backend_get_from_fwnode_lookup, IIO_BACKEND); + +/** + * iio_backend_get_priv - Get driver private data + * @back: Backend device + */ +void *iio_backend_get_priv(const struct iio_backend *back) +{ + return back->priv; +} +EXPORT_SYMBOL_NS_GPL(iio_backend_get_priv, IIO_BACKEND); + +static void iio_backend_unregister(void *arg) +{ + struct iio_backend *back = arg; + + guard(mutex)(&iio_back_lock); + list_del(&back->entry); +} + +/** + * devm_iio_backend_register - Device managed backend device register + * @dev: Backend device being registered + * @ops: Backend ops + * @priv: Device private data + * + * @ops is mandatory. Not providing it results in -EINVAL. + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int devm_iio_backend_register(struct device *dev, + const struct iio_backend_ops *ops, void *priv) +{ + struct iio_backend *back; + + if (!ops) + return dev_err_probe(dev, -EINVAL, "No backend ops given\n"); + + /* + * Through device_links, we guarantee that a frontend device cannot be + * bound/exist if the backend driver is not around. Hence, we can bind + * the backend object lifetime with the device being passed since + * removing it will tear the frontend/consumer down. + */ + back = devm_kzalloc(dev, sizeof(*back), GFP_KERNEL); + if (!back) + return -ENOMEM; + + back->ops = ops; + back->owner = dev->driver->owner; + back->dev = dev; + back->priv = priv; + scoped_guard(mutex, &iio_back_lock) + list_add(&back->entry, &iio_back_list); + + return devm_add_action_or_reset(dev, iio_backend_unregister, back); +} +EXPORT_SYMBOL_NS_GPL(devm_iio_backend_register, IIO_BACKEND); + +MODULE_AUTHOR("Nuno Sa "); +MODULE_DESCRIPTION("Framework to handle complex IIO aggregate devices"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/iio/backend.h b/include/linux/iio/backend.h new file mode 100644 index 000000000000..a6d79381866e --- /dev/null +++ b/include/linux/iio/backend.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _IIO_BACKEND_H_ +#define _IIO_BACKEND_H_ + +#include + +struct fwnode_handle; +struct iio_backend; +struct device; +struct iio_dev; + +enum iio_backend_data_type { + IIO_BACKEND_TWOS_COMPLEMENT, + IIO_BACKEND_OFFSET_BINARY, + IIO_BACKEND_DATA_TYPE_MAX +}; + +/** + * struct iio_backend_data_fmt - Backend data format + * @type: Data type. + * @sign_extend: Bool to tell if the data is sign extended. + * @enable: Enable/Disable the data format module. If disabled, + * not formatting will happen. + */ +struct iio_backend_data_fmt { + enum iio_backend_data_type type; + bool sign_extend; + bool enable; +}; + +/** + * struct iio_backend_ops - operations structure for an iio_backend + * @enable: Enable backend. + * @disable: Disable backend. + * @chan_enable: Enable one channel. + * @chan_disable: Disable one channel. + * @data_format_set: Configure the data format for a specific channel. + * @request_buffer: Request an IIO buffer. + * @free_buffer: Free an IIO buffer. + **/ +struct iio_backend_ops { + int (*enable)(struct iio_backend *back); + void (*disable)(struct iio_backend *back); + int (*chan_enable)(struct iio_backend *back, unsigned int chan); + int (*chan_disable)(struct iio_backend *back, unsigned int chan); + int (*data_format_set)(struct iio_backend *back, unsigned int chan, + const struct iio_backend_data_fmt *data); + struct iio_buffer *(*request_buffer)(struct iio_backend *back, + struct iio_dev *indio_dev); + void (*free_buffer)(struct iio_backend *back, + struct iio_buffer *buffer); +}; + +int iio_backend_chan_enable(struct iio_backend *back, unsigned int chan); +int iio_backend_chan_disable(struct iio_backend *back, unsigned int chan); +int devm_iio_backend_enable(struct device *dev, struct iio_backend *back); +int iio_backend_data_format_set(struct iio_backend *back, unsigned int chan, + const struct iio_backend_data_fmt *data); +int devm_iio_backend_request_buffer(struct device *dev, + struct iio_backend *back, + struct iio_dev *indio_dev); + +void *iio_backend_get_priv(const struct iio_backend *conv); +struct iio_backend *devm_iio_backend_get(struct device *dev, const char *name); +struct iio_backend * +__devm_iio_backend_get_from_fwnode_lookup(struct device *dev, + struct fwnode_handle *fwnode); + +int devm_iio_backend_register(struct device *dev, + const struct iio_backend_ops *ops, void *priv); + +#endif -- cgit v1.2.3 From bb42191f85c389bf816373d25c3e4c94045cf4ff Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Sat, 10 Feb 2024 21:57:18 +0100 Subject: iio: adc: ad9467: convert to backend framework Convert the driver to use the new IIO backend framework. The device functionality is expected to be the same (meaning no added or removed features). Also note this patch effectively breaks ABI and that's needed so we can properly support this device and add needed features making use of the new IIO framework. Given the lack of features (and devices supported) in the ad9467 driver compared with the ADI out of tree version, we don't expect any user of the upstream driver so no one should notice the ABI breakage. However, if someone is affected by this, ADI will happily support transitioning to the backend framework. Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240210-iio-backend-v11-6-f5242a5fb42a@analog.com Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 2 +- drivers/iio/adc/ad9467.c | 267 +++++++++++++++++++++++++++++++---------------- 2 files changed, 178 insertions(+), 91 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 3b73c509bd68..6793faacb4dc 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -291,7 +291,7 @@ config AD799X config AD9467 tristate "Analog Devices AD9467 High Speed ADC driver" depends on SPI - depends on ADI_AXI_ADC + select IIO_BACKEND help Say yes here to build support for Analog Devices: * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index 6581fce4ba95..7475ec2a56c7 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -17,13 +17,12 @@ #include +#include #include #include #include -#include - /* * ADI High-Speed ADC common spi interface registers * See Application-Note AN-877: @@ -102,15 +101,20 @@ #define AD9467_REG_VREF_MASK 0x0F struct ad9467_chip_info { - struct adi_axi_adc_chip_info axi_adc_info; - unsigned int default_output_mode; - unsigned int vref_mask; + const char *name; + unsigned int id; + const struct iio_chan_spec *channels; + unsigned int num_channels; + const unsigned int (*scale_table)[2]; + int num_scales; + unsigned long max_rate; + unsigned int default_output_mode; + unsigned int vref_mask; }; -#define to_ad9467_chip_info(_info) \ - container_of(_info, struct ad9467_chip_info, axi_adc_info) - struct ad9467_state { + const struct ad9467_chip_info *info; + struct iio_backend *back; struct spi_device *spi; struct clk *clk; unsigned int output_mode; @@ -151,10 +155,10 @@ static int ad9467_spi_write(struct spi_device *spi, unsigned int reg, return spi_write(spi, buf, ARRAY_SIZE(buf)); } -static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg, +static int ad9467_reg_access(struct iio_dev *indio_dev, unsigned int reg, unsigned int writeval, unsigned int *readval) { - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); struct spi_device *spi = st->spi; int ret; @@ -191,10 +195,10 @@ static const unsigned int ad9467_scale_table[][2] = { {2300, 8}, {2400, 9}, {2500, 10}, }; -static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index, +static void __ad9467_get_scale(struct ad9467_state *st, int index, unsigned int *val, unsigned int *val2) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; + const struct ad9467_chip_info *info = st->info; const struct iio_chan_spec *chan = &info->channels[0]; unsigned int tmp; @@ -229,52 +233,44 @@ static const struct iio_chan_spec ad9467_channels[] = { }; static const struct ad9467_chip_info ad9467_chip_tbl = { - .axi_adc_info = { - .name = "ad9467", - .id = CHIPID_AD9467, - .max_rate = 250000000UL, - .scale_table = ad9467_scale_table, - .num_scales = ARRAY_SIZE(ad9467_scale_table), - .channels = ad9467_channels, - .num_channels = ARRAY_SIZE(ad9467_channels), - }, + .name = "ad9467", + .id = CHIPID_AD9467, + .max_rate = 250000000UL, + .scale_table = ad9467_scale_table, + .num_scales = ARRAY_SIZE(ad9467_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), .default_output_mode = AD9467_DEF_OUTPUT_MODE, .vref_mask = AD9467_REG_VREF_MASK, }; static const struct ad9467_chip_info ad9434_chip_tbl = { - .axi_adc_info = { - .name = "ad9434", - .id = CHIPID_AD9434, - .max_rate = 500000000UL, - .scale_table = ad9434_scale_table, - .num_scales = ARRAY_SIZE(ad9434_scale_table), - .channels = ad9434_channels, - .num_channels = ARRAY_SIZE(ad9434_channels), - }, + .name = "ad9434", + .id = CHIPID_AD9434, + .max_rate = 500000000UL, + .scale_table = ad9434_scale_table, + .num_scales = ARRAY_SIZE(ad9434_scale_table), + .channels = ad9434_channels, + .num_channels = ARRAY_SIZE(ad9434_channels), .default_output_mode = AD9434_DEF_OUTPUT_MODE, .vref_mask = AD9434_REG_VREF_MASK, }; static const struct ad9467_chip_info ad9265_chip_tbl = { - .axi_adc_info = { - .name = "ad9265", - .id = CHIPID_AD9265, - .max_rate = 125000000UL, - .scale_table = ad9265_scale_table, - .num_scales = ARRAY_SIZE(ad9265_scale_table), - .channels = ad9467_channels, - .num_channels = ARRAY_SIZE(ad9467_channels), - }, + .name = "ad9265", + .id = CHIPID_AD9265, + .max_rate = 125000000UL, + .scale_table = ad9265_scale_table, + .num_scales = ARRAY_SIZE(ad9265_scale_table), + .channels = ad9467_channels, + .num_channels = ARRAY_SIZE(ad9467_channels), .default_output_mode = AD9265_DEF_OUTPUT_MODE, .vref_mask = AD9265_REG_VREF_MASK, }; -static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) +static int ad9467_get_scale(struct ad9467_state *st, int *val, int *val2) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - const struct ad9467_chip_info *info1 = to_ad9467_chip_info(info); - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + const struct ad9467_chip_info *info = st->info; unsigned int i, vref_val; int ret; @@ -282,7 +278,7 @@ static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) if (ret < 0) return ret; - vref_val = ret & info1->vref_mask; + vref_val = ret & info->vref_mask; for (i = 0; i < info->num_scales; i++) { if (vref_val == info->scale_table[i][1]) @@ -292,15 +288,14 @@ static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) if (i == info->num_scales) return -ERANGE; - __ad9467_get_scale(conv, i, val, val2); + __ad9467_get_scale(st, i, val, val2); return IIO_VAL_INT_PLUS_MICRO; } -static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) +static int ad9467_set_scale(struct ad9467_state *st, int val, int val2) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + const struct ad9467_chip_info *info = st->info; unsigned int scale_val[2]; unsigned int i; int ret; @@ -309,7 +304,7 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) return -EINVAL; for (i = 0; i < info->num_scales; i++) { - __ad9467_get_scale(conv, i, &scale_val[0], &scale_val[1]); + __ad9467_get_scale(st, i, &scale_val[0], &scale_val[1]); if (scale_val[0] != val || scale_val[1] != val2) continue; @@ -326,15 +321,15 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) return -EINVAL; } -static int ad9467_read_raw(struct adi_axi_adc_conv *conv, +static int ad9467_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long m) { - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); switch (m) { case IIO_CHAN_INFO_SCALE: - return ad9467_get_scale(conv, val, val2); + return ad9467_get_scale(st, val, val2); case IIO_CHAN_INFO_SAMP_FREQ: *val = clk_get_rate(st->clk); @@ -344,17 +339,17 @@ static int ad9467_read_raw(struct adi_axi_adc_conv *conv, } } -static int ad9467_write_raw(struct adi_axi_adc_conv *conv, +static int ad9467_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); + const struct ad9467_chip_info *info = st->info; long r_clk; switch (mask) { case IIO_CHAN_INFO_SCALE: - return ad9467_set_scale(conv, val, val2); + return ad9467_set_scale(st, val, val2); case IIO_CHAN_INFO_SAMP_FREQ: r_clk = clk_round_rate(st->clk, val); if (r_clk < 0 || r_clk > info->max_rate) { @@ -369,13 +364,13 @@ static int ad9467_write_raw(struct adi_axi_adc_conv *conv, } } -static int ad9467_read_avail(struct adi_axi_adc_conv *conv, +static int ad9467_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, const int **vals, int *type, int *length, long mask) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct ad9467_state *st = iio_priv(indio_dev); + const struct ad9467_chip_info *info = st->info; switch (mask) { case IIO_CHAN_INFO_SCALE: @@ -389,6 +384,33 @@ static int ad9467_read_avail(struct adi_axi_adc_conv *conv, } } +static int ad9467_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct ad9467_state *st = iio_priv(indio_dev); + unsigned int c; + int ret; + + for (c = 0; c < st->info->num_channels; c++) { + if (test_bit(c, scan_mask)) + ret = iio_backend_chan_enable(st->back, c); + else + ret = iio_backend_chan_disable(st->back, c); + if (ret) + return ret; + } + + return 0; +} + +static const struct iio_info ad9467_info = { + .read_raw = ad9467_read_raw, + .write_raw = ad9467_write_raw, + .update_scan_mode = ad9467_update_scan_mode, + .debugfs_reg_access = ad9467_reg_access, + .read_avail = ad9467_read_avail, +}; + static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode) { int ret; @@ -401,10 +423,9 @@ static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode) AN877_ADC_TRANSFER_SYNC); } -static int ad9467_scale_fill(struct adi_axi_adc_conv *conv) +static int ad9467_scale_fill(struct ad9467_state *st) { - const struct adi_axi_adc_chip_info *info = conv->chip_info; - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + const struct ad9467_chip_info *info = st->info; unsigned int i, val1, val2; st->scales = devm_kmalloc_array(&st->spi->dev, info->num_scales, @@ -413,7 +434,7 @@ static int ad9467_scale_fill(struct adi_axi_adc_conv *conv) return -ENOMEM; for (i = 0; i < info->num_scales; i++) { - __ad9467_get_scale(conv, i, &val1, &val2); + __ad9467_get_scale(st, i, &val1, &val2); st->scales[i][0] = val1; st->scales[i][1] = val2; } @@ -421,11 +442,27 @@ static int ad9467_scale_fill(struct adi_axi_adc_conv *conv) return 0; } -static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) +static int ad9467_setup(struct ad9467_state *st) { - struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + struct iio_backend_data_fmt data = { + .sign_extend = true, + .enable = true, + }; + unsigned int c, mode; + int ret; + + mode = st->info->default_output_mode | AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT; + ret = ad9467_outputmode_set(st->spi, mode); + if (ret) + return ret; - return ad9467_outputmode_set(st->spi, st->output_mode); + for (c = 0; c < st->info->num_channels; c++) { + ret = iio_backend_data_format_set(st->back, c, &data); + if (ret) + return ret; + } + + return 0; } static int ad9467_reset(struct device *dev) @@ -443,25 +480,65 @@ static int ad9467_reset(struct device *dev) return 0; } +static int ad9467_iio_backend_get(struct ad9467_state *st) +{ + struct device *dev = &st->spi->dev; + struct device_node *__back; + + st->back = devm_iio_backend_get(dev, NULL); + if (!IS_ERR(st->back)) + return 0; + /* If not found, don't error out as we might have legacy DT property */ + if (PTR_ERR(st->back) != -ENOENT) + return PTR_ERR(st->back); + + /* + * if we don't get the backend using the normal API's, use the legacy + * 'adi,adc-dev' property. So we get all nodes with that property, and + * look for the one pointing at us. Then we directly lookup that fwnode + * on the backend list of registered devices. This is done so we don't + * make io-backends mandatory which would break DT ABI. + */ + for_each_node_with_property(__back, "adi,adc-dev") { + struct device_node *__me; + + __me = of_parse_phandle(__back, "adi,adc-dev", 0); + if (!__me) + continue; + + if (!device_match_of_node(dev, __me)) { + of_node_put(__me); + continue; + } + + of_node_put(__me); + st->back = __devm_iio_backend_get_from_fwnode_lookup(dev, + of_fwnode_handle(__back)); + of_node_put(__back); + return PTR_ERR_OR_ZERO(st->back); + } + + return -ENODEV; +} + static int ad9467_probe(struct spi_device *spi) { - const struct ad9467_chip_info *info; - struct adi_axi_adc_conv *conv; + struct iio_dev *indio_dev; struct ad9467_state *st; unsigned int id; int ret; - info = spi_get_device_match_data(spi); - if (!info) - return -ENODEV; - - conv = devm_adi_axi_adc_conv_register(&spi->dev, sizeof(*st)); - if (IS_ERR(conv)) - return PTR_ERR(conv); + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; - st = adi_axi_adc_conv_priv(conv); + st = iio_priv(indio_dev); st->spi = spi; + st->info = spi_get_device_match_data(spi); + if (!st->info) + return -ENODEV; + st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); if (IS_ERR(st->clk)) return PTR_ERR(st->clk); @@ -475,29 +552,39 @@ static int ad9467_probe(struct spi_device *spi) if (ret) return ret; - conv->chip_info = &info->axi_adc_info; - - ret = ad9467_scale_fill(conv); + ret = ad9467_scale_fill(st); if (ret) return ret; id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID); - if (id != conv->chip_info->id) { + if (id != st->info->id) { dev_err(&spi->dev, "Mismatch CHIP_ID, got 0x%X, expected 0x%X\n", - id, conv->chip_info->id); + id, st->info->id); return -ENODEV; } - conv->reg_access = ad9467_reg_access; - conv->write_raw = ad9467_write_raw; - conv->read_raw = ad9467_read_raw; - conv->read_avail = ad9467_read_avail; - conv->preenable_setup = ad9467_preenable_setup; + indio_dev->name = st->info->name; + indio_dev->channels = st->info->channels; + indio_dev->num_channels = st->info->num_channels; + indio_dev->info = &ad9467_info; - st->output_mode = info->default_output_mode | - AN877_ADC_OUTPUT_MODE_TWOS_COMPLEMENT; + ret = ad9467_iio_backend_get(st); + if (ret) + return ret; - return 0; + ret = devm_iio_backend_request_buffer(&spi->dev, st->back, indio_dev); + if (ret) + return ret; + + ret = devm_iio_backend_enable(&spi->dev, st->back); + if (ret) + return ret; + + ret = ad9467_setup(st); + if (ret) + return ret; + + return devm_iio_device_register(&spi->dev, indio_dev); } static const struct of_device_id ad9467_of_match[] = { @@ -529,4 +616,4 @@ module_spi_driver(ad9467_driver); MODULE_AUTHOR("Michael Hennerich "); MODULE_DESCRIPTION("Analog Devices AD9467 ADC driver"); MODULE_LICENSE("GPL v2"); -MODULE_IMPORT_NS(IIO_ADI_AXI); +MODULE_IMPORT_NS(IIO_BACKEND); -- cgit v1.2.3 From 794ef0e57854d794173c8ab6bcce3285032dcd95 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Sat, 10 Feb 2024 21:57:19 +0100 Subject: iio: adc: adi-axi-adc: move to backend framework Move to the IIO backend framework. Devices supported by adi-axi-adc now register themselves as backend devices. Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240210-iio-backend-v11-7-f5242a5fb42a@analog.com Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 2 +- drivers/iio/adc/adi-axi-adc.c | 384 +++++++++--------------------------- include/linux/iio/adc/adi-axi-adc.h | 68 ------- 3 files changed, 96 insertions(+), 358 deletions(-) delete mode 100644 include/linux/iio/adc/adi-axi-adc.h (limited to 'drivers') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 6793faacb4dc..02a55809cb6a 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -309,7 +309,7 @@ config ADI_AXI_ADC select IIO_BUFFER_HW_CONSUMER select IIO_BUFFER_DMAENGINE select REGMAP_MMIO - depends on OF + select IIO_BACKEND help Say yes here to build support for Analog Devices Generic AXI ADC IP core. The IP core is used for interfacing with diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c index 0f21d1d98b9f..4156639b3c8b 100644 --- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include @@ -17,13 +18,12 @@ #include #include -#include -#include -#include -#include - #include -#include + +#include +#include +#include +#include /* * Register definitions: @@ -44,6 +44,7 @@ #define ADI_AXI_REG_CHAN_CTRL_PN_SEL_OWR BIT(10) #define ADI_AXI_REG_CHAN_CTRL_IQCOR_EN BIT(9) #define ADI_AXI_REG_CHAN_CTRL_DCFILT_EN BIT(8) +#define ADI_AXI_REG_CHAN_CTRL_FMT_MASK GENMASK(6, 4) #define ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT BIT(6) #define ADI_AXI_REG_CHAN_CTRL_FMT_TYPE BIT(5) #define ADI_AXI_REG_CHAN_CTRL_FMT_EN BIT(4) @@ -55,286 +56,100 @@ ADI_AXI_REG_CHAN_CTRL_FMT_EN | \ ADI_AXI_REG_CHAN_CTRL_ENABLE) -struct adi_axi_adc_core_info { - unsigned int version; -}; - struct adi_axi_adc_state { - struct mutex lock; - - struct adi_axi_adc_client *client; struct regmap *regmap; -}; - -struct adi_axi_adc_client { - struct list_head entry; - struct adi_axi_adc_conv conv; - struct adi_axi_adc_state *state; struct device *dev; - const struct adi_axi_adc_core_info *info; }; -static LIST_HEAD(registered_clients); -static DEFINE_MUTEX(registered_clients_lock); - -static struct adi_axi_adc_client *conv_to_client(struct adi_axi_adc_conv *conv) -{ - return container_of(conv, struct adi_axi_adc_client, conv); -} - -void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv) -{ - struct adi_axi_adc_client *cl = conv_to_client(conv); - - return (char *)cl + ALIGN(sizeof(struct adi_axi_adc_client), - IIO_DMA_MINALIGN); -} -EXPORT_SYMBOL_NS_GPL(adi_axi_adc_conv_priv, IIO_ADI_AXI); - -static int adi_axi_adc_config_dma_buffer(struct device *dev, - struct iio_dev *indio_dev) -{ - const char *dma_name; - - if (!device_property_present(dev, "dmas")) - return 0; - - if (device_property_read_string(dev, "dma-names", &dma_name)) - dma_name = "rx"; - - return devm_iio_dmaengine_buffer_setup(indio_dev->dev.parent, - indio_dev, dma_name); -} - -static int adi_axi_adc_read_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int *val, int *val2, long mask) -{ - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - - if (!conv->read_raw) - return -EOPNOTSUPP; - - return conv->read_raw(conv, chan, val, val2, mask); -} - -static int adi_axi_adc_write_raw(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - int val, int val2, long mask) -{ - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - - if (!conv->write_raw) - return -EOPNOTSUPP; - - return conv->write_raw(conv, chan, val, val2, mask); -} - -static int adi_axi_adc_read_avail(struct iio_dev *indio_dev, - struct iio_chan_spec const *chan, - const int **vals, int *type, int *length, - long mask) -{ - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - - if (!conv->read_avail) - return -EOPNOTSUPP; - - return conv->read_avail(conv, chan, vals, type, length, mask); -} - -static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev, - const unsigned long *scan_mask) +static int axi_adc_enable(struct iio_backend *back) { - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - unsigned int i; + struct adi_axi_adc_state *st = iio_backend_get_priv(back); int ret; - for (i = 0; i < conv->chip_info->num_channels; i++) { - if (test_bit(i, scan_mask)) - ret = regmap_set_bits(st->regmap, - ADI_AXI_REG_CHAN_CTRL(i), - ADI_AXI_REG_CHAN_CTRL_ENABLE); - else - ret = regmap_clear_bits(st->regmap, - ADI_AXI_REG_CHAN_CTRL(i), - ADI_AXI_REG_CHAN_CTRL_ENABLE); - if (ret) - return ret; - } - - return 0; -} - -static struct adi_axi_adc_conv *adi_axi_adc_conv_register(struct device *dev, - size_t sizeof_priv) -{ - struct adi_axi_adc_client *cl; - size_t alloc_size; - - alloc_size = ALIGN(sizeof(struct adi_axi_adc_client), IIO_DMA_MINALIGN); - if (sizeof_priv) - alloc_size += ALIGN(sizeof_priv, IIO_DMA_MINALIGN); - - cl = kzalloc(alloc_size, GFP_KERNEL); - if (!cl) - return ERR_PTR(-ENOMEM); - - mutex_lock(®istered_clients_lock); - - cl->dev = get_device(dev); - - list_add_tail(&cl->entry, ®istered_clients); - - mutex_unlock(®istered_clients_lock); + ret = regmap_set_bits(st->regmap, ADI_AXI_REG_RSTN, + ADI_AXI_REG_RSTN_MMCM_RSTN); + if (ret) + return ret; - return &cl->conv; + fsleep(10000); + return regmap_set_bits(st->regmap, ADI_AXI_REG_RSTN, + ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN); } -static void adi_axi_adc_conv_unregister(struct adi_axi_adc_conv *conv) +static void axi_adc_disable(struct iio_backend *back) { - struct adi_axi_adc_client *cl = conv_to_client(conv); - - mutex_lock(®istered_clients_lock); - - list_del(&cl->entry); - put_device(cl->dev); + struct adi_axi_adc_state *st = iio_backend_get_priv(back); - mutex_unlock(®istered_clients_lock); - - kfree(cl); + regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0); } -static void devm_adi_axi_adc_conv_release(void *conv) +static int axi_adc_data_format_set(struct iio_backend *back, unsigned int chan, + const struct iio_backend_data_fmt *data) { - adi_axi_adc_conv_unregister(conv); + struct adi_axi_adc_state *st = iio_backend_get_priv(back); + u32 val; + + if (!data->enable) + return regmap_clear_bits(st->regmap, + ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_FMT_EN); + + val = FIELD_PREP(ADI_AXI_REG_CHAN_CTRL_FMT_EN, true); + if (data->sign_extend) + val |= FIELD_PREP(ADI_AXI_REG_CHAN_CTRL_FMT_SIGNEXT, true); + if (data->type == IIO_BACKEND_OFFSET_BINARY) + val |= FIELD_PREP(ADI_AXI_REG_CHAN_CTRL_FMT_TYPE, true); + + return regmap_update_bits(st->regmap, ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_FMT_MASK, val); } -struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, - size_t sizeof_priv) +static int axi_adc_chan_enable(struct iio_backend *back, unsigned int chan) { - struct adi_axi_adc_conv *conv; - int ret; - - conv = adi_axi_adc_conv_register(dev, sizeof_priv); - if (IS_ERR(conv)) - return conv; + struct adi_axi_adc_state *st = iio_backend_get_priv(back); - ret = devm_add_action_or_reset(dev, devm_adi_axi_adc_conv_release, - conv); - if (ret) - return ERR_PTR(ret); - - return conv; + return regmap_set_bits(st->regmap, ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_ENABLE); } -EXPORT_SYMBOL_NS_GPL(devm_adi_axi_adc_conv_register, IIO_ADI_AXI); - -static const struct iio_info adi_axi_adc_info = { - .read_raw = &adi_axi_adc_read_raw, - .write_raw = &adi_axi_adc_write_raw, - .update_scan_mode = &adi_axi_adc_update_scan_mode, - .read_avail = &adi_axi_adc_read_avail, -}; - -static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = { - .version = ADI_AXI_PCORE_VER(10, 0, 'a'), -}; -static struct adi_axi_adc_client *adi_axi_adc_attach_client(struct device *dev) +static int axi_adc_chan_disable(struct iio_backend *back, unsigned int chan) { - const struct adi_axi_adc_core_info *info; - struct adi_axi_adc_client *cl; - struct device_node *cln; - - info = of_device_get_match_data(dev); - if (!info) - return ERR_PTR(-ENODEV); - - cln = of_parse_phandle(dev->of_node, "adi,adc-dev", 0); - if (!cln) { - dev_err(dev, "No 'adi,adc-dev' node defined\n"); - return ERR_PTR(-ENODEV); - } - - mutex_lock(®istered_clients_lock); - - list_for_each_entry(cl, ®istered_clients, entry) { - if (!cl->dev) - continue; - - if (cl->dev->of_node != cln) - continue; - - if (!try_module_get(cl->dev->driver->owner)) { - mutex_unlock(®istered_clients_lock); - of_node_put(cln); - return ERR_PTR(-ENODEV); - } - - get_device(cl->dev); - cl->info = info; - mutex_unlock(®istered_clients_lock); - of_node_put(cln); - return cl; - } + struct adi_axi_adc_state *st = iio_backend_get_priv(back); - mutex_unlock(®istered_clients_lock); - of_node_put(cln); - - return ERR_PTR(-EPROBE_DEFER); + return regmap_clear_bits(st->regmap, ADI_AXI_REG_CHAN_CTRL(chan), + ADI_AXI_REG_CHAN_CTRL_ENABLE); } -static int adi_axi_adc_setup_channels(struct device *dev, - struct adi_axi_adc_state *st) +static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back, + struct iio_dev *indio_dev) { - struct adi_axi_adc_conv *conv = &st->client->conv; - int i, ret; + struct adi_axi_adc_state *st = iio_backend_get_priv(back); + struct iio_buffer *buffer; + const char *dma_name; + int ret; - if (conv->preenable_setup) { - ret = conv->preenable_setup(conv); - if (ret) - return ret; - } + if (device_property_read_string(st->dev, "dma-names", &dma_name)) + dma_name = "rx"; - for (i = 0; i < conv->chip_info->num_channels; i++) { - ret = regmap_write(st->regmap, ADI_AXI_REG_CHAN_CTRL(i), - ADI_AXI_REG_CHAN_CTRL_DEFAULTS); - if (ret) - return ret; + buffer = iio_dmaengine_buffer_alloc(st->dev, dma_name); + if (IS_ERR(buffer)) { + dev_err(st->dev, "Could not get DMA buffer, %ld\n", + PTR_ERR(buffer)); + return ERR_CAST(buffer); } - return 0; -} - -static int axi_adc_reset(struct adi_axi_adc_state *st) -{ - int ret; - - ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0); - if (ret) - return ret; - - mdelay(10); - ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, - ADI_AXI_REG_RSTN_MMCM_RSTN); + indio_dev->modes |= INDIO_BUFFER_HARDWARE; + ret = iio_device_attach_buffer(indio_dev, buffer); if (ret) - return ret; + return ERR_PTR(ret); - mdelay(10); - return regmap_write(st->regmap, ADI_AXI_REG_RSTN, - ADI_AXI_REG_RSTN_RSTN | ADI_AXI_REG_RSTN_MMCM_RSTN); + return buffer; } -static void adi_axi_adc_cleanup(void *data) +static void axi_adc_free_buffer(struct iio_backend *back, + struct iio_buffer *buffer) { - struct adi_axi_adc_client *cl = data; - - put_device(cl->dev); - module_put(cl->dev->driver->owner); + iio_dmaengine_buffer_free(buffer); } static const struct regmap_config axi_adc_regmap_config = { @@ -344,45 +159,47 @@ static const struct regmap_config axi_adc_regmap_config = { .max_register = 0x0800, }; +static const struct iio_backend_ops adi_axi_adc_generic = { + .enable = axi_adc_enable, + .disable = axi_adc_disable, + .data_format_set = axi_adc_data_format_set, + .chan_enable = axi_adc_chan_enable, + .chan_disable = axi_adc_chan_disable, + .request_buffer = axi_adc_request_buffer, + .free_buffer = axi_adc_free_buffer, +}; + static int adi_axi_adc_probe(struct platform_device *pdev) { - struct adi_axi_adc_conv *conv; - struct iio_dev *indio_dev; - struct adi_axi_adc_client *cl; + const unsigned int *expected_ver; struct adi_axi_adc_state *st; void __iomem *base; unsigned int ver; int ret; - cl = adi_axi_adc_attach_client(&pdev->dev); - if (IS_ERR(cl)) - return PTR_ERR(cl); - - ret = devm_add_action_or_reset(&pdev->dev, adi_axi_adc_cleanup, cl); - if (ret) - return ret; - - indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); - if (indio_dev == NULL) + st = devm_kzalloc(&pdev->dev, sizeof(*st), GFP_KERNEL); + if (!st) return -ENOMEM; - st = iio_priv(indio_dev); - st->client = cl; - cl->state = st; - mutex_init(&st->lock); - base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); + st->dev = &pdev->dev; st->regmap = devm_regmap_init_mmio(&pdev->dev, base, &axi_adc_regmap_config); if (IS_ERR(st->regmap)) return PTR_ERR(st->regmap); - conv = &st->client->conv; + expected_ver = device_get_match_data(&pdev->dev); + if (!expected_ver) + return -ENODEV; - ret = axi_adc_reset(st); + /* + * Force disable the core. Up to the frontend to enable us. And we can + * still read/write registers... + */ + ret = regmap_write(st->regmap, ADI_AXI_REG_RSTN, 0); if (ret) return ret; @@ -390,33 +207,19 @@ static int adi_axi_adc_probe(struct platform_device *pdev) if (ret) return ret; - if (cl->info->version > ver) { + if (*expected_ver > ver) { dev_err(&pdev->dev, "IP core version is too old. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n", - ADI_AXI_PCORE_VER_MAJOR(cl->info->version), - ADI_AXI_PCORE_VER_MINOR(cl->info->version), - ADI_AXI_PCORE_VER_PATCH(cl->info->version), + ADI_AXI_PCORE_VER_MAJOR(*expected_ver), + ADI_AXI_PCORE_VER_MINOR(*expected_ver), + ADI_AXI_PCORE_VER_PATCH(*expected_ver), ADI_AXI_PCORE_VER_MAJOR(ver), ADI_AXI_PCORE_VER_MINOR(ver), ADI_AXI_PCORE_VER_PATCH(ver)); return -ENODEV; } - indio_dev->info = &adi_axi_adc_info; - indio_dev->name = "adi-axi-adc"; - indio_dev->modes = INDIO_DIRECT_MODE; - indio_dev->num_channels = conv->chip_info->num_channels; - indio_dev->channels = conv->chip_info->channels; - - ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev); - if (ret) - return ret; - - ret = adi_axi_adc_setup_channels(&pdev->dev, st); - if (ret) - return ret; - - ret = devm_iio_device_register(&pdev->dev, indio_dev); + ret = devm_iio_backend_register(&pdev->dev, &adi_axi_adc_generic, st); if (ret) return ret; @@ -428,6 +231,8 @@ static int adi_axi_adc_probe(struct platform_device *pdev) return 0; } +static unsigned int adi_axi_adc_10_0_a_info = ADI_AXI_PCORE_VER(10, 0, 'a'); + /* Match table for of_platform binding */ static const struct of_device_id adi_axi_adc_of_match[] = { { .compatible = "adi,axi-adc-10.0.a", .data = &adi_axi_adc_10_0_a_info }, @@ -448,3 +253,4 @@ MODULE_AUTHOR("Michael Hennerich "); MODULE_DESCRIPTION("Analog Devices Generic AXI ADC IP core driver"); MODULE_LICENSE("GPL v2"); MODULE_IMPORT_NS(IIO_DMAENGINE_BUFFER); +MODULE_IMPORT_NS(IIO_BACKEND); diff --git a/include/linux/iio/adc/adi-axi-adc.h b/include/linux/iio/adc/adi-axi-adc.h deleted file mode 100644 index b7904992d561..000000000000 --- a/include/linux/iio/adc/adi-axi-adc.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Analog Devices Generic AXI ADC IP core driver/library - * Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip - * - * Copyright 2012-2020 Analog Devices Inc. - */ -#ifndef __ADI_AXI_ADC_H__ -#define __ADI_AXI_ADC_H__ - -struct device; -struct iio_chan_spec; - -/** - * struct adi_axi_adc_chip_info - Chip specific information - * @name Chip name - * @id Chip ID (usually product ID) - * @channels Channel specifications of type @struct iio_chan_spec - * @num_channels Number of @channels - * @scale_table Supported scales by the chip; tuples of 2 ints - * @num_scales Number of scales in the table - * @max_rate Maximum sampling rate supported by the device - */ -struct adi_axi_adc_chip_info { - const char *name; - unsigned int id; - - const struct iio_chan_spec *channels; - unsigned int num_channels; - - const unsigned int (*scale_table)[2]; - int num_scales; - - unsigned long max_rate; -}; - -/** - * struct adi_axi_adc_conv - data of the ADC attached to the AXI ADC - * @chip_info chip info details for the client ADC - * @preenable_setup op to run in the client before enabling the AXI ADC - * @reg_access IIO debugfs_reg_access hook for the client ADC - * @read_raw IIO read_raw hook for the client ADC - * @write_raw IIO write_raw hook for the client ADC - * @read_avail IIO read_avail hook for the client ADC - */ -struct adi_axi_adc_conv { - const struct adi_axi_adc_chip_info *chip_info; - - int (*preenable_setup)(struct adi_axi_adc_conv *conv); - int (*reg_access)(struct adi_axi_adc_conv *conv, unsigned int reg, - unsigned int writeval, unsigned int *readval); - int (*read_raw)(struct adi_axi_adc_conv *conv, - struct iio_chan_spec const *chan, - int *val, int *val2, long mask); - int (*write_raw)(struct adi_axi_adc_conv *conv, - struct iio_chan_spec const *chan, - int val, int val2, long mask); - int (*read_avail)(struct adi_axi_adc_conv *conv, - struct iio_chan_spec const *chan, - const int **val, int *type, int *length, long mask); -}; - -struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, - size_t sizeof_priv); - -void *adi_axi_adc_conv_priv(struct adi_axi_adc_conv *conv); - -#endif -- cgit v1.2.3 From ac73e222e37d1fa158c19adeb7bf037782c4c99d Mon Sep 17 00:00:00 2001 From: "andy.shevchenko@gmail.com" Date: Sun, 11 Feb 2024 22:14:32 +0200 Subject: iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere Use dev_err_probe() everywhere where it is appropriate. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240211201526.1518165-2-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c index e887b45cdbcd..7b9dc849f010 100644 --- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c @@ -25,10 +25,9 @@ static int st_lsm9ds0_probe_accel(struct st_lsm9ds0 *lsm9ds0, struct regmap *reg struct st_sensor_data *data; settings = st_accel_get_settings(lsm9ds0->name); - if (!settings) { - dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name); - return -ENODEV; - } + if (!settings) + return dev_err_probe(dev, -ENODEV, "device name %s not recognized.\n", + lsm9ds0->name); lsm9ds0->accel = devm_iio_device_alloc(dev, sizeof(*data)); if (!lsm9ds0->accel) @@ -51,10 +50,9 @@ static int st_lsm9ds0_probe_magn(struct st_lsm9ds0 *lsm9ds0, struct regmap *regm struct st_sensor_data *data; settings = st_magn_get_settings(lsm9ds0->name); - if (!settings) { - dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name); - return -ENODEV; - } + if (!settings) + return dev_err_probe(dev, -ENODEV, "device name %s not recognized.\n", + lsm9ds0->name); lsm9ds0->magn = devm_iio_device_alloc(dev, sizeof(*data)); if (!lsm9ds0->magn) @@ -80,8 +78,7 @@ int st_lsm9ds0_probe(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap) ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names), regulator_names); if (ret) - return dev_err_probe(dev, ret, - "unable to enable Vdd supply\n"); + return dev_err_probe(dev, ret, "unable to enable Vdd supply\n"); /* Setup accelerometer device */ ret = st_lsm9ds0_probe_accel(lsm9ds0, regmap); -- cgit v1.2.3 From 07d6a5a4820972a11ee1d34b7fe95ddc58a4a473 Mon Sep 17 00:00:00 2001 From: "andy.shevchenko@gmail.com" Date: Sun, 11 Feb 2024 22:14:33 +0200 Subject: iio: st_sensors: lsm9ds0: Don't use "proxy" headers Update header inclusions to follow IWYU (Include What You Use) principle. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240211201526.1518165-3-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 5 ++++- drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 4 ++-- drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 4 +++- drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 4 +++- 4 files changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h index 76678cdefb07..e67d31b48441 100644 --- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h @@ -4,9 +4,12 @@ #ifndef ST_LSM9DS0_H #define ST_LSM9DS0_H -struct iio_dev; +struct device; +struct regmap; struct regulator; +struct iio_dev; + struct st_lsm9ds0 { struct device *dev; const char *name; diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c index 7b9dc849f010..10c1b2ba7a3d 100644 --- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c @@ -7,10 +7,10 @@ * Author: Andy Shevchenko */ -#include +#include +#include #include #include -#include #include #include diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c index 61d855083aa0..ab8504286ba4 100644 --- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c @@ -7,8 +7,10 @@ * Author: Andy Shevchenko */ +#include +#include +#include #include -#include #include #include #include diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c index 8cc041d56cf7..69e9135795a3 100644 --- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c @@ -7,7 +7,9 @@ * Author: Andy Shevchenko */ -#include +#include +#include +#include #include #include #include -- cgit v1.2.3 From 8655d0e378bcba53c670c5a55f11c1debb20b681 Mon Sep 17 00:00:00 2001 From: "andy.shevchenko@gmail.com" Date: Sun, 11 Feb 2024 22:14:34 +0200 Subject: iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables Use common style for a terminator entry in the ID tables. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240211201526.1518165-4-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c index ab8504286ba4..d03cec3b24fe 100644 --- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c +++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c @@ -41,7 +41,7 @@ MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table); static const struct acpi_device_id st_lsm9ds0_acpi_match[] = { {"ACCL0001", (kernel_ulong_t)LSM303D_IMU_DEV_NAME}, - { }, + {} }; MODULE_DEVICE_TABLE(acpi, st_lsm9ds0_acpi_match); -- cgit v1.2.3 From 66b53cb790e794b180cbd4d6bffa34dadbc7ab3d Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Sun, 11 Feb 2024 09:56:33 +0200 Subject: iio: pressure: hsc030pa: use signed type to hold div_64() result Use signed type to variable holding the result given by div_s64(). Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20240211075645.28777-3-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hsc030pa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/hsc030pa.c b/drivers/iio/pressure/hsc030pa.c index d6a51f0c335f..7e3f74d53b47 100644 --- a/drivers/iio/pressure/hsc030pa.c +++ b/drivers/iio/pressure/hsc030pa.c @@ -406,7 +406,7 @@ int hsc_common_probe(struct device *dev, hsc_recv_fn recv) struct hsc_data *hsc; struct iio_dev *indio_dev; const char *triplet; - u64 tmp; + s64 tmp; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*hsc)); -- cgit v1.2.3 From aaafb989ab7ba9c68e08241baad851144f7793b5 Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Sun, 11 Feb 2024 09:56:34 +0200 Subject: iio: pressure: hsc030pa: include cleanup Add includes based on prior reviews from Andy. Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20240211075645.28777-4-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hsc030pa.h | 2 ++ drivers/iio/pressure/hsc030pa_i2c.c | 2 ++ drivers/iio/pressure/hsc030pa_spi.c | 2 ++ 3 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/pressure/hsc030pa.h b/drivers/iio/pressure/hsc030pa.h index d20420dba4f6..f1079a70799f 100644 --- a/drivers/iio/pressure/hsc030pa.h +++ b/drivers/iio/pressure/hsc030pa.h @@ -10,6 +10,8 @@ #include +#include + #define HSC_REG_MEASUREMENT_RD_SIZE 4 struct device; diff --git a/drivers/iio/pressure/hsc030pa_i2c.c b/drivers/iio/pressure/hsc030pa_i2c.c index e2b524b36417..b0c47f863afb 100644 --- a/drivers/iio/pressure/hsc030pa_i2c.c +++ b/drivers/iio/pressure/hsc030pa_i2c.c @@ -8,10 +8,12 @@ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf [i2c related] */ +#include #include #include #include #include +#include #include diff --git a/drivers/iio/pressure/hsc030pa_spi.c b/drivers/iio/pressure/hsc030pa_spi.c index a719bade8326..f6da49cdb5e5 100644 --- a/drivers/iio/pressure/hsc030pa_spi.c +++ b/drivers/iio/pressure/hsc030pa_spi.c @@ -7,10 +7,12 @@ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf */ +#include #include #include #include #include +#include #include -- cgit v1.2.3 From b0e42c9e932323d340d9ec000c2ee06610386a80 Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Sun, 11 Feb 2024 09:56:35 +0200 Subject: iio: pressure: hsc030pa: update datasheet URLs Provide bus-specific technical datasheet in the _i2c.c _spi.c headers instead of the generic one. Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20240211075645.28777-5-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hsc030pa_i2c.c | 4 ++-- drivers/iio/pressure/hsc030pa_spi.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/hsc030pa_i2c.c b/drivers/iio/pressure/hsc030pa_i2c.c index b0c47f863afb..b5810bafef40 100644 --- a/drivers/iio/pressure/hsc030pa_i2c.c +++ b/drivers/iio/pressure/hsc030pa_i2c.c @@ -4,8 +4,8 @@ * * Copyright (c) 2023 Petre Rodan * - * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [hsc] - * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf [i2c related] + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/common/documents/sps-siot-i2c-comms-digital-output-pressure-sensors-tn-008201-3-en-ciid-45841.pdf + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf */ #include diff --git a/drivers/iio/pressure/hsc030pa_spi.c b/drivers/iio/pressure/hsc030pa_spi.c index f6da49cdb5e5..8d3441f1dcf9 100644 --- a/drivers/iio/pressure/hsc030pa_spi.c +++ b/drivers/iio/pressure/hsc030pa_spi.c @@ -4,7 +4,8 @@ * * Copyright (c) 2023 Petre Rodan * - * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-spi-comms-digital-ouptu-pressure-sensors-tn-008202-3-en-ciid-45843.pdf + * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf */ #include -- cgit v1.2.3 From df3186e829c33e3c577e00e8b3faa25763a44bb0 Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Sun, 11 Feb 2024 09:56:36 +0200 Subject: iio: pressure: hsc030pa add mandatory delay Add a mandatory 2ms delay between consecutive chip reads. A Technical Note pdf specifies that the measurement cycle in these chips takes around 1.26ms. By adding this 2ms delay we make sure that we never get stale measurements. For more details, please see "Figure 1" in the pdf below: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20240211075645.28777-6-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/hsc030pa.h | 1 + drivers/iio/pressure/hsc030pa_i2c.c | 3 +++ drivers/iio/pressure/hsc030pa_spi.c | 2 ++ 3 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/pressure/hsc030pa.h b/drivers/iio/pressure/hsc030pa.h index f1079a70799f..56dc8e88194b 100644 --- a/drivers/iio/pressure/hsc030pa.h +++ b/drivers/iio/pressure/hsc030pa.h @@ -13,6 +13,7 @@ #include #define HSC_REG_MEASUREMENT_RD_SIZE 4 +#define HSC_RESP_TIME_MS 2 struct device; diff --git a/drivers/iio/pressure/hsc030pa_i2c.c b/drivers/iio/pressure/hsc030pa_i2c.c index b5810bafef40..b3fd230e71da 100644 --- a/drivers/iio/pressure/hsc030pa_i2c.c +++ b/drivers/iio/pressure/hsc030pa_i2c.c @@ -8,6 +8,7 @@ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf */ +#include #include #include #include @@ -25,6 +26,8 @@ static int hsc_i2c_recv(struct hsc_data *data) struct i2c_msg msg; int ret; + msleep_interruptible(HSC_RESP_TIME_MS); + msg.addr = client->addr; msg.flags = client->flags | I2C_M_RD; msg.len = HSC_REG_MEASUREMENT_RD_SIZE; diff --git a/drivers/iio/pressure/hsc030pa_spi.c b/drivers/iio/pressure/hsc030pa_spi.c index 8d3441f1dcf9..818fa6303454 100644 --- a/drivers/iio/pressure/hsc030pa_spi.c +++ b/drivers/iio/pressure/hsc030pa_spi.c @@ -8,6 +8,7 @@ * Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/common/documents/sps-siot-sleep-mode-technical-note-008286-1-en-ciid-155793.pdf */ +#include #include #include #include @@ -28,6 +29,7 @@ static int hsc_spi_recv(struct hsc_data *data) .len = HSC_REG_MEASUREMENT_RD_SIZE, }; + msleep_interruptible(HSC_RESP_TIME_MS); return spi_sync_transfer(spi, &xfer, 1); } -- cgit v1.2.3 From 05f5d78834a118b06b0292beb20891f45415d07b Mon Sep 17 00:00:00 2001 From: Petre Rodan Date: Sun, 11 Feb 2024 09:56:37 +0200 Subject: iio: pressure: hsc030pa add triggered buffer Add triggered buffer feature. Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20240211075645.28777-7-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/Kconfig | 2 ++ drivers/iio/pressure/hsc030pa.c | 47 +++++++++++++++++++++++++++++++++++++++++ drivers/iio/pressure/hsc030pa.h | 4 ++++ 3 files changed, 53 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 5da7931dc537..3ad38506028e 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -114,6 +114,8 @@ config HSC030PA depends on (I2C || SPI_MASTER) select HSC030PA_I2C if I2C select HSC030PA_SPI if SPI_MASTER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Honeywell TruStability HSC and SSC pressure and temperature sensor series. diff --git a/drivers/iio/pressure/hsc030pa.c b/drivers/iio/pressure/hsc030pa.c index 7e3f74d53b47..1682b90d4557 100644 --- a/drivers/iio/pressure/hsc030pa.c +++ b/drivers/iio/pressure/hsc030pa.c @@ -22,8 +22,11 @@ #include #include +#include #include #include +#include +#include #include @@ -297,6 +300,29 @@ static int hsc_get_measurement(struct hsc_data *data) return 0; } +static irqreturn_t hsc_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct hsc_data *data = iio_priv(indio_dev); + int ret; + + ret = hsc_get_measurement(data); + if (ret) + goto error; + + memcpy(&data->scan.chan[0], &data->buffer[0], 2); + memcpy(&data->scan.chan[1], &data->buffer[2], 2); + + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + iio_get_time_ns(indio_dev)); + +error: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + /* * IIO ABI expects * value = (conv + offset) * scale @@ -382,13 +408,29 @@ static const struct iio_chan_spec hsc_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + .endianness = IIO_BE, + }, }, { .type = IIO_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), + .scan_index = 1, + .scan_type = { + .sign = 'u', + .realbits = 11, + .storagebits = 16, + .shift = 5, + .endianness = IIO_BE, + }, }, + IIO_CHAN_SOFT_TIMESTAMP(2), }; static const struct iio_info hsc_info = { @@ -485,6 +527,11 @@ int hsc_common_probe(struct device *dev, hsc_recv_fn recv) indio_dev->channels = hsc->chip->channels; indio_dev->num_channels = hsc->chip->num_channels; + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + hsc_trigger_handler, NULL); + if (ret) + return ret; + return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_NS(hsc_common_probe, IIO_HONEYWELL_HSC030PA); diff --git a/drivers/iio/pressure/hsc030pa.h b/drivers/iio/pressure/hsc030pa.h index 56dc8e88194b..9b40f46f575f 100644 --- a/drivers/iio/pressure/hsc030pa.h +++ b/drivers/iio/pressure/hsc030pa.h @@ -56,6 +56,10 @@ struct hsc_data { s32 p_scale_dec; s64 p_offset; s32 p_offset_dec; + struct { + __be16 chan[2]; + s64 timestamp __aligned(8); + } scan; u8 buffer[HSC_REG_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN); }; -- cgit v1.2.3 From 00ef7708fa6073a84f6898fdcdfe965d903b0378 Mon Sep 17 00:00:00 2001 From: Mike Looijmans Date: Fri, 16 Feb 2024 16:30:20 +0100 Subject: iio: adc: ti-ads1298: Add driver Skeleton driver for the TI ADS1298 medical ADC. This device is typically used for ECG and similar measurements. Supports data acquisition at configurable scale and sampling frequency. Reviewed-by: Andy Shevchenko Signed-off-by: Mike Looijmans Link: https://lore.kernel.org/r/20240216153020.485201-2-mike.looijmans@topic.nl Signed-off-by: Jonathan Cameron --- drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ti-ads1298.c | 769 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 781 insertions(+) create mode 100644 drivers/iio/adc/ti-ads1298.c (limited to 'drivers') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 02a55809cb6a..d4462c202784 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -1312,6 +1312,17 @@ config TI_ADS1100 This driver can also be built as a module. If so, the module will be called ti-ads1100. +config TI_ADS1298 + tristate "Texas Instruments ADS1298" + depends on SPI + select IIO_BUFFER + help + If you say yes here you get support for Texas Instruments ADS1298 + medical ADC chips + + This driver can also be built as a module. If so, the module will be + called ti-ads1298. + config TI_ADS7950 tristate "Texas Instruments ADS7950 ADC driver" depends on SPI && GPIOLIB diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index d2fda54a3259..a64326f40fcb 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -116,6 +116,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o +obj-$(CONFIG_TI_ADS1298) += ti-ads1298.o obj-$(CONFIG_TI_ADS7924) += ti-ads7924.o obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o diff --git a/drivers/iio/adc/ti-ads1298.c b/drivers/iio/adc/ti-ads1298.c new file mode 100644 index 000000000000..ed895a30beed --- /dev/null +++ b/drivers/iio/adc/ti-ads1298.c @@ -0,0 +1,769 @@ +// SPDX-License-Identifier: GPL-2.0 +/* TI ADS1298 chip family driver + * Copyright (C) 2023 - 2024 Topic Embedded Products + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +/* Commands */ +#define ADS1298_CMD_WAKEUP 0x02 +#define ADS1298_CMD_STANDBY 0x04 +#define ADS1298_CMD_RESET 0x06 +#define ADS1298_CMD_START 0x08 +#define ADS1298_CMD_STOP 0x0a +#define ADS1298_CMD_RDATAC 0x10 +#define ADS1298_CMD_SDATAC 0x11 +#define ADS1298_CMD_RDATA 0x12 +#define ADS1298_CMD_RREG 0x20 +#define ADS1298_CMD_WREG 0x40 + +/* Registers */ +#define ADS1298_REG_ID 0x00 +#define ADS1298_MASK_ID_FAMILY GENMASK(7, 3) +#define ADS1298_MASK_ID_CHANNELS GENMASK(2, 0) +#define ADS1298_ID_FAMILY_ADS129X 0x90 +#define ADS1298_ID_FAMILY_ADS129XR 0xd0 + +#define ADS1298_REG_CONFIG1 0x01 +#define ADS1298_MASK_CONFIG1_HR BIT(7) +#define ADS1298_MASK_CONFIG1_DR GENMASK(2, 0) +#define ADS1298_SHIFT_DR_HR 6 +#define ADS1298_SHIFT_DR_LP 7 +#define ADS1298_LOWEST_DR 0x06 + +#define ADS1298_REG_CONFIG2 0x02 +#define ADS1298_MASK_CONFIG2_RESERVED BIT(6) +#define ADS1298_MASK_CONFIG2_WCT_CHOP BIT(5) +#define ADS1298_MASK_CONFIG2_INT_TEST BIT(4) +#define ADS1298_MASK_CONFIG2_TEST_AMP BIT(2) +#define ADS1298_MASK_CONFIG2_TEST_FREQ_DC GENMASK(1, 0) +#define ADS1298_MASK_CONFIG2_TEST_FREQ_SLOW 0 +#define ADS1298_MASK_CONFIG2_TEST_FREQ_FAST BIT(0) + +#define ADS1298_REG_CONFIG3 0x03 +#define ADS1298_MASK_CONFIG3_PWR_REFBUF BIT(7) +#define ADS1298_MASK_CONFIG3_RESERVED BIT(6) +#define ADS1298_MASK_CONFIG3_VREF_4V BIT(5) + +#define ADS1298_REG_LOFF 0x04 +#define ADS1298_REG_CHnSET(n) (0x05 + n) +#define ADS1298_MASK_CH_PD BIT(7) +#define ADS1298_MASK_CH_PGA GENMASK(6, 4) +#define ADS1298_MASK_CH_MUX GENMASK(2, 0) + +#define ADS1298_REG_LOFF_STATP 0x12 +#define ADS1298_REG_LOFF_STATN 0x13 +#define ADS1298_REG_CONFIG4 0x17 +#define ADS1298_MASK_CONFIG4_SINGLE_SHOT BIT(3) + +#define ADS1298_REG_WCT1 0x18 +#define ADS1298_REG_WCT2 0x19 + +#define ADS1298_MAX_CHANNELS 8 +#define ADS1298_BITS_PER_SAMPLE 24 +#define ADS1298_CLK_RATE_HZ 2048000 +#define ADS1298_CLOCKS_TO_USECS(x) \ + (DIV_ROUND_UP((x) * MICROHZ_PER_HZ, ADS1298_CLK_RATE_HZ)) +/* + * Read/write register commands require 4 clocks to decode, for speeds above + * 2x the clock rate, this would require extra time between the command byte and + * the data. Much simpler is to just limit the SPI transfer speed while doing + * register access. + */ +#define ADS1298_SPI_BUS_SPEED_SLOW ADS1298_CLK_RATE_HZ +/* For reading and writing registers, we need a 3-byte buffer */ +#define ADS1298_SPI_CMD_BUFFER_SIZE 3 +/* Outputs status word and 'n' 24-bit samples, plus the command byte */ +#define ADS1298_SPI_RDATA_BUFFER_SIZE(n) (((n) + 1) * 3 + 1) +#define ADS1298_SPI_RDATA_BUFFER_SIZE_MAX \ + ADS1298_SPI_RDATA_BUFFER_SIZE(ADS1298_MAX_CHANNELS) + +struct ads1298_private { + const struct ads1298_chip_info *chip_info; + struct spi_device *spi; + struct regulator *reg_avdd; + struct regulator *reg_vref; + struct clk *clk; + struct regmap *regmap; + struct completion completion; + struct iio_trigger *trig; + struct spi_transfer rdata_xfer; + struct spi_message rdata_msg; + spinlock_t irq_busy_lock; /* Handshake between SPI and DRDY irqs */ + /* + * rdata_xfer_busy increments when a DRDY occurs and decrements when SPI + * completion is reported. Hence its meaning is: + * 0 = Waiting for DRDY interrupt + * 1 = SPI transfer in progress + * 2 = DRDY during SPI transfer, start another transfer on completion + * >2 = Multiple DRDY during transfer, lost rdata_xfer_busy - 2 samples + */ + unsigned int rdata_xfer_busy; + + /* Temporary storage for demuxing data after SPI transfer */ + u32 bounce_buffer[ADS1298_MAX_CHANNELS]; + + /* For synchronous SPI exchanges (read/write registers) */ + u8 cmd_buffer[ADS1298_SPI_CMD_BUFFER_SIZE] __aligned(IIO_DMA_MINALIGN); + + /* Buffer used for incoming SPI data */ + u8 rx_buffer[ADS1298_SPI_RDATA_BUFFER_SIZE_MAX]; + /* Contains the RDATA command and zeroes to clock out */ + u8 tx_buffer[ADS1298_SPI_RDATA_BUFFER_SIZE_MAX]; +}; + +/* Three bytes per sample in RX buffer, starting at offset 4 */ +#define ADS1298_OFFSET_IN_RX_BUFFER(index) (3 * (index) + 4) + +#define ADS1298_CHAN(index) \ +{ \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .address = ADS1298_OFFSET_IN_RX_BUFFER(index), \ + .info_mask_separate = \ + BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = \ + BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = ADS1298_BITS_PER_SAMPLE, \ + .storagebits = 32, \ + .endianness = IIO_CPU, \ + }, \ +} + +static const struct iio_chan_spec ads1298_channels[] = { + ADS1298_CHAN(0), + ADS1298_CHAN(1), + ADS1298_CHAN(2), + ADS1298_CHAN(3), + ADS1298_CHAN(4), + ADS1298_CHAN(5), + ADS1298_CHAN(6), + ADS1298_CHAN(7), +}; + +static int ads1298_write_cmd(struct ads1298_private *priv, u8 command) +{ + struct spi_transfer xfer = { + .tx_buf = priv->cmd_buffer, + .rx_buf = priv->cmd_buffer, + .len = 1, + .speed_hz = ADS1298_SPI_BUS_SPEED_SLOW, + .delay = { + .value = 2, + .unit = SPI_DELAY_UNIT_USECS, + }, + }; + + priv->cmd_buffer[0] = command; + + return spi_sync_transfer(priv->spi, &xfer, 1); +} + +static int ads1298_read_one(struct ads1298_private *priv, int chan_index) +{ + int ret; + + /* Enable the channel */ + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CHnSET(chan_index), + ADS1298_MASK_CH_PD, 0); + if (ret) + return ret; + + /* Enable single-shot mode, so we don't need to send a STOP */ + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CONFIG4, + ADS1298_MASK_CONFIG4_SINGLE_SHOT, + ADS1298_MASK_CONFIG4_SINGLE_SHOT); + if (ret) + return ret; + + reinit_completion(&priv->completion); + + ret = ads1298_write_cmd(priv, ADS1298_CMD_START); + if (ret < 0) { + dev_err(&priv->spi->dev, "CMD_START error: %d\n", ret); + return ret; + } + + /* Cannot take longer than 40ms (250Hz) */ + ret = wait_for_completion_timeout(&priv->completion, msecs_to_jiffies(50)); + if (!ret) + return -ETIMEDOUT; + + return 0; +} + +static int ads1298_get_samp_freq(struct ads1298_private *priv, int *val) +{ + unsigned long rate; + unsigned int cfg; + int ret; + + ret = regmap_read(priv->regmap, ADS1298_REG_CONFIG1, &cfg); + if (ret) + return ret; + + if (priv->clk) + rate = clk_get_rate(priv->clk); + else + rate = ADS1298_CLK_RATE_HZ; + if (!rate) + return -EINVAL; + + /* Data rate shift depends on HR/LP mode */ + if (cfg & ADS1298_MASK_CONFIG1_HR) + rate >>= ADS1298_SHIFT_DR_HR; + else + rate >>= ADS1298_SHIFT_DR_LP; + + *val = rate >> (cfg & ADS1298_MASK_CONFIG1_DR); + + return IIO_VAL_INT; +} + +static int ads1298_set_samp_freq(struct ads1298_private *priv, int val) +{ + unsigned long rate; + unsigned int factor; + unsigned int cfg; + + if (priv->clk) + rate = clk_get_rate(priv->clk); + else + rate = ADS1298_CLK_RATE_HZ; + if (!rate) + return -EINVAL; + + factor = (rate >> ADS1298_SHIFT_DR_HR) / val; + if (factor >= BIT(ADS1298_SHIFT_DR_LP)) + cfg = ADS1298_LOWEST_DR; + else if (factor) + cfg = ADS1298_MASK_CONFIG1_HR | ilog2(factor); /* Use HR mode */ + else + cfg = ADS1298_MASK_CONFIG1_HR; /* Fastest possible */ + + return regmap_update_bits(priv->regmap, ADS1298_REG_CONFIG1, + ADS1298_MASK_CONFIG1_HR | ADS1298_MASK_CONFIG1_DR, + cfg); +} + +static const u8 ads1298_pga_settings[] = { 6, 1, 2, 3, 4, 8, 12 }; + +static int ads1298_get_scale(struct ads1298_private *priv, + int channel, int *val, int *val2) +{ + int ret; + unsigned int regval; + u8 gain; + + if (priv->reg_vref) { + ret = regulator_get_voltage(priv->reg_vref); + if (ret < 0) + return ret; + + *val = ret / MILLI; /* Convert to millivolts */ + } else { + ret = regmap_read(priv->regmap, ADS1298_REG_CONFIG3, ®val); + if (ret) + return ret; + + /* Refererence in millivolts */ + *val = regval & ADS1298_MASK_CONFIG3_VREF_4V ? 4000 : 2400; + } + + ret = regmap_read(priv->regmap, ADS1298_REG_CHnSET(channel), ®val); + if (ret) + return ret; + + gain = ads1298_pga_settings[FIELD_GET(ADS1298_MASK_CH_PGA, regval)]; + *val /= gain; /* Full scale is VREF / gain */ + + *val2 = ADS1298_BITS_PER_SAMPLE - 1; /* Signed, hence the -1 */ + + return IIO_VAL_FRACTIONAL_LOG2; +} + +static int ads1298_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = ads1298_read_one(priv, chan->scan_index); + + iio_device_release_direct_mode(indio_dev); + + if (ret) + return ret; + + *val = sign_extend32(get_unaligned_be24(priv->rx_buffer + chan->address), + ADS1298_BITS_PER_SAMPLE - 1); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + return ads1298_get_scale(priv, chan->channel, val, val2); + case IIO_CHAN_INFO_SAMP_FREQ: + return ads1298_get_samp_freq(priv, val); + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = regmap_read(priv->regmap, ADS1298_REG_CONFIG1, val); + if (ret) + return ret; + + *val = 16 << (*val & ADS1298_MASK_CONFIG1_DR); + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ads1298_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, + int val2, long mask) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return ads1298_set_samp_freq(priv, val); + default: + return -EINVAL; + } +} + +static int ads1298_reg_write(void *context, unsigned int reg, unsigned int val) +{ + struct ads1298_private *priv = context; + struct spi_transfer reg_write_xfer = { + .tx_buf = priv->cmd_buffer, + .rx_buf = priv->cmd_buffer, + .len = 3, + .speed_hz = ADS1298_SPI_BUS_SPEED_SLOW, + .delay = { + .value = 2, + .unit = SPI_DELAY_UNIT_USECS, + }, + }; + + priv->cmd_buffer[0] = ADS1298_CMD_WREG | reg; + priv->cmd_buffer[1] = 0; /* Number of registers to be written - 1 */ + priv->cmd_buffer[2] = val; + + return spi_sync_transfer(priv->spi, ®_write_xfer, 1); +} + +static int ads1298_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + struct ads1298_private *priv = context; + struct spi_transfer reg_read_xfer = { + .tx_buf = priv->cmd_buffer, + .rx_buf = priv->cmd_buffer, + .len = 3, + .speed_hz = ADS1298_SPI_BUS_SPEED_SLOW, + .delay = { + .value = 2, + .unit = SPI_DELAY_UNIT_USECS, + }, + }; + int ret; + + priv->cmd_buffer[0] = ADS1298_CMD_RREG | reg; + priv->cmd_buffer[1] = 0; /* Number of registers to be read - 1 */ + priv->cmd_buffer[2] = 0; + + ret = spi_sync_transfer(priv->spi, ®_read_xfer, 1); + if (ret) + return ret; + + *val = priv->cmd_buffer[2]; + + return 0; +} + +static int ads1298_reg_access(struct iio_dev *indio_dev, unsigned int reg, + unsigned int writeval, unsigned int *readval) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + + if (readval) + return regmap_read(priv->regmap, reg, readval); + + return regmap_write(priv->regmap, reg, writeval); +} + +static void ads1298_rdata_unmark_busy(struct ads1298_private *priv) +{ + /* Notify we're no longer waiting for the SPI transfer to complete */ + guard(spinlock_irqsave)(&priv->irq_busy_lock); + priv->rdata_xfer_busy = 0; +} + +static int ads1298_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + unsigned int val; + int ret; + int i; + + /* Make the interrupt routines start with a clean slate */ + ads1298_rdata_unmark_busy(priv); + + /* Configure power-down bits to match scan mask */ + for (i = 0; i < indio_dev->num_channels; i++) { + val = test_bit(i, scan_mask) ? 0 : ADS1298_MASK_CH_PD; + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CHnSET(i), + ADS1298_MASK_CH_PD, val); + if (ret) + return ret; + } + + return 0; +} + +static const struct iio_info ads1298_info = { + .read_raw = &ads1298_read_raw, + .write_raw = &ads1298_write_raw, + .update_scan_mode = &ads1298_update_scan_mode, + .debugfs_reg_access = &ads1298_reg_access, +}; + +static void ads1298_rdata_release_busy_or_restart(struct ads1298_private *priv) +{ + guard(spinlock_irqsave)(&priv->irq_busy_lock); + + if (priv->rdata_xfer_busy > 1) { + /* + * DRDY interrupt occurred before SPI completion. Start a new + * SPI transaction now to retrieve the data that wasn't latched + * into the ADS1298 chip's transfer buffer yet. + */ + spi_async(priv->spi, &priv->rdata_msg); + /* + * If more than one DRDY took place, there was an overrun. Since + * the sample is already lost, reset the counter to 1 so that + * we will wait for a DRDY interrupt after this SPI transaction. + */ + priv->rdata_xfer_busy = 1; + } else { + /* No pending data, wait for DRDY */ + priv->rdata_xfer_busy = 0; + } +} + +/* Called from SPI completion interrupt handler */ +static void ads1298_rdata_complete(void *context) +{ + struct iio_dev *indio_dev = context; + struct ads1298_private *priv = iio_priv(indio_dev); + int scan_index; + u32 *bounce = priv->bounce_buffer; + + if (!iio_buffer_enabled(indio_dev)) { + /* + * for a single transfer mode we're kept in direct_mode until + * completion, avoiding a race with buffered IO. + */ + ads1298_rdata_unmark_busy(priv); + complete(&priv->completion); + return; + } + + /* Demux the channel data into our bounce buffer */ + for_each_set_bit(scan_index, indio_dev->active_scan_mask, + indio_dev->masklength) { + const struct iio_chan_spec *scan_chan = + &indio_dev->channels[scan_index]; + const u8 *data = priv->rx_buffer + scan_chan->address; + + *bounce++ = get_unaligned_be24(data); + } + + /* rx_buffer can be overwritten from this point on */ + ads1298_rdata_release_busy_or_restart(priv); + + iio_push_to_buffers(indio_dev, priv->bounce_buffer); +} + +static irqreturn_t ads1298_interrupt(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct ads1298_private *priv = iio_priv(indio_dev); + unsigned int wasbusy; + + guard(spinlock_irqsave)(&priv->irq_busy_lock); + + wasbusy = priv->rdata_xfer_busy++; + /* When no SPI transfer in transit, start one now */ + if (!wasbusy) + spi_async(priv->spi, &priv->rdata_msg); + + return IRQ_HANDLED; +}; + +static int ads1298_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + int ret; + + /* Disable single-shot mode */ + ret = regmap_update_bits(priv->regmap, ADS1298_REG_CONFIG4, + ADS1298_MASK_CONFIG4_SINGLE_SHOT, 0); + if (ret) + return ret; + + return ads1298_write_cmd(priv, ADS1298_CMD_START); +} + +static int ads1298_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + + return ads1298_write_cmd(priv, ADS1298_CMD_STOP); +} + +static const struct iio_buffer_setup_ops ads1298_setup_ops = { + .postenable = &ads1298_buffer_postenable, + .predisable = &ads1298_buffer_predisable, +}; + +static void ads1298_reg_disable(void *reg) +{ + regulator_disable(reg); +} + +static const struct regmap_range ads1298_regmap_volatile_range[] = { + regmap_reg_range(ADS1298_REG_LOFF_STATP, ADS1298_REG_LOFF_STATN), +}; + +static const struct regmap_access_table ads1298_regmap_volatile = { + .yes_ranges = ads1298_regmap_volatile_range, + .n_yes_ranges = ARRAY_SIZE(ads1298_regmap_volatile_range), +}; + +static const struct regmap_config ads1298_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .reg_read = ads1298_reg_read, + .reg_write = ads1298_reg_write, + .max_register = ADS1298_REG_WCT2, + .volatile_table = &ads1298_regmap_volatile, + .cache_type = REGCACHE_MAPLE, +}; + +static int ads1298_init(struct iio_dev *indio_dev) +{ + struct ads1298_private *priv = iio_priv(indio_dev); + struct device *dev = &priv->spi->dev; + const char *suffix; + unsigned int val; + int ret; + + /* Device initializes into RDATAC mode, which we don't want */ + ret = ads1298_write_cmd(priv, ADS1298_CMD_SDATAC); + if (ret) + return ret; + + ret = regmap_read(priv->regmap, ADS1298_REG_ID, &val); + if (ret) + return ret; + + /* Fill in name and channel count based on what the chip told us */ + indio_dev->num_channels = 4 + 2 * (val & ADS1298_MASK_ID_CHANNELS); + switch (val & ADS1298_MASK_ID_FAMILY) { + case ADS1298_ID_FAMILY_ADS129X: + suffix = ""; + break; + case ADS1298_ID_FAMILY_ADS129XR: + suffix = "r"; + break; + default: + return dev_err_probe(dev, -ENODEV, "Unknown ID: 0x%x\n", val); + } + indio_dev->name = devm_kasprintf(dev, GFP_KERNEL, "ads129%u%s", + indio_dev->num_channels, suffix); + + /* Enable internal test signal, double amplitude, double frequency */ + ret = regmap_write(priv->regmap, ADS1298_REG_CONFIG2, + ADS1298_MASK_CONFIG2_RESERVED | + ADS1298_MASK_CONFIG2_INT_TEST | + ADS1298_MASK_CONFIG2_TEST_AMP | + ADS1298_MASK_CONFIG2_TEST_FREQ_FAST); + if (ret) + return ret; + + val = ADS1298_MASK_CONFIG3_RESERVED; /* Must write 1 always */ + if (!priv->reg_vref) { + /* Enable internal reference */ + val |= ADS1298_MASK_CONFIG3_PWR_REFBUF; + /* Use 4V VREF when power supply is at least 4.4V */ + if (regulator_get_voltage(priv->reg_avdd) >= 4400000) + val |= ADS1298_MASK_CONFIG3_VREF_4V; + } + return regmap_write(priv->regmap, ADS1298_REG_CONFIG3, val); +} + +static int ads1298_probe(struct spi_device *spi) +{ + struct ads1298_private *priv; + struct iio_dev *indio_dev; + struct device *dev = &spi->dev; + struct gpio_desc *reset_gpio; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + + /* Reset to be asserted before enabling clock and power */ + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(reset_gpio)) + return dev_err_probe(dev, PTR_ERR(reset_gpio), + "Cannot get reset GPIO\n"); + + /* VREF can be supplied externally, otherwise use internal reference */ + priv->reg_vref = devm_regulator_get_optional(dev, "vref"); + if (IS_ERR(priv->reg_vref)) { + if (PTR_ERR(priv->reg_vref) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(priv->reg_avdd), + "Failed to get vref regulator\n"); + + priv->reg_vref = NULL; + } else { + ret = regulator_enable(priv->reg_vref); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, ads1298_reg_disable, priv->reg_vref); + if (ret) + return ret; + } + + priv->clk = devm_clk_get_optional_enabled(dev, "clk"); + if (IS_ERR(priv->clk)) + return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get clk\n"); + + priv->reg_avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(priv->reg_avdd)) + return dev_err_probe(dev, PTR_ERR(priv->reg_avdd), + "Failed to get avdd regulator\n"); + + ret = regulator_enable(priv->reg_avdd); + if (ret) + return dev_err_probe(dev, ret, "Failed to enable avdd regulator\n"); + + ret = devm_add_action_or_reset(dev, ads1298_reg_disable, priv->reg_avdd); + if (ret) + return ret; + + priv->spi = spi; + init_completion(&priv->completion); + spin_lock_init(&priv->irq_busy_lock); + priv->regmap = devm_regmap_init(dev, NULL, priv, &ads1298_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + indio_dev->channels = ads1298_channels; + indio_dev->info = &ads1298_info; + + if (reset_gpio) { + /* + * Deassert reset now that clock and power are active. + * Minimum reset pulsewidth is 2 clock cycles. + */ + fsleep(ADS1298_CLOCKS_TO_USECS(2)); + gpiod_set_value_cansleep(reset_gpio, 0); + } else { + ret = ads1298_write_cmd(priv, ADS1298_CMD_RESET); + if (ret) + return dev_err_probe(dev, ret, "RESET failed\n"); + } + /* Wait 18 clock cycles for reset command to complete */ + fsleep(ADS1298_CLOCKS_TO_USECS(18)); + + ret = ads1298_init(indio_dev); + if (ret) + return dev_err_probe(dev, ret, "Init failed\n"); + + priv->tx_buffer[0] = ADS1298_CMD_RDATA; + priv->rdata_xfer.tx_buf = priv->tx_buffer; + priv->rdata_xfer.rx_buf = priv->rx_buffer; + priv->rdata_xfer.len = ADS1298_SPI_RDATA_BUFFER_SIZE(indio_dev->num_channels); + /* Must keep CS low for 4 clocks */ + priv->rdata_xfer.delay.value = 2; + priv->rdata_xfer.delay.unit = SPI_DELAY_UNIT_USECS; + spi_message_init_with_transfers(&priv->rdata_msg, &priv->rdata_xfer, 1); + priv->rdata_msg.complete = &ads1298_rdata_complete; + priv->rdata_msg.context = indio_dev; + + ret = devm_request_irq(dev, spi->irq, &ads1298_interrupt, + IRQF_TRIGGER_FALLING, indio_dev->name, + indio_dev); + if (ret) + return ret; + + ret = devm_iio_kfifo_buffer_setup(dev, indio_dev, &ads1298_setup_ops); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct spi_device_id ads1298_id[] = { + { "ads1298" }, + { } +}; +MODULE_DEVICE_TABLE(spi, ads1298_id); + +static const struct of_device_id ads1298_of_table[] = { + { .compatible = "ti,ads1298" }, + { } +}; +MODULE_DEVICE_TABLE(of, ads1298_of_table); + +static struct spi_driver ads1298_driver = { + .driver = { + .name = "ads1298", + .of_match_table = ads1298_of_table, + }, + .probe = ads1298_probe, + .id_table = ads1298_id, +}; +module_spi_driver(ads1298_driver); + +MODULE_AUTHOR("Mike Looijmans "); +MODULE_DESCRIPTION("TI ADS1298 ADC"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 5a01e812a6fe8e1541e84f897c8b74ebfef1df7c Mon Sep 17 00:00:00 2001 From: Jonathan LoBue Date: Fri, 16 Feb 2024 10:22:53 -0800 Subject: iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver Adds a description of the duplicate ACPI identifier issue between devices using bmc150 and bmi323. Reviewed-by: Andy Shevchenko Co-developed-by: Luke D. Jones Signed-off-by: Luke D. Jones Co-developed-by: Denis Benato Signed-off-by: Denis Benato Co-developed-by: Antheas Kapenekakis Signed-off-by: Antheas Kapenekakis Signed-off-by: Jonathan LoBue Tested-by: Hans de Goede Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20240216182253.27069-1-jlobue10@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel-i2c.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c index f08594b372cf..1c2e40369839 100644 --- a/drivers/iio/accel/bmc150-accel-i2c.c +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -224,6 +224,19 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = { {"BMA250E"}, {"BMC150A"}, {"BMI055A"}, + /* + * The "BOSC0200" identifier used here is not unique to devices using + * bmc150. The same "BOSC0200" identifier is found in the ACPI tables + * of the ASUS ROG ALLY and Ayaneo AIR Plus which both use a Bosch + * BMI323 chip. This creates a conflict with duplicate ACPI identifiers + * which multiple drivers want to use. Fortunately, when the bmc150 + * driver starts to load on the ASUS ROG ALLY, the chip ID check + * portion fails (correctly) because the chip IDs received (via i2c) + * are unique between bmc150 and bmi323 and a dmesg output similar to + * this: "bmc150_accel_i2c i2c-BOSC0200:00: Invalid chip 0" can be + * seen. This allows the bmi323 driver to take over for ASUS ROG ALLY, + * and other devices using the bmi323 chip. + */ {"BOSC0200"}, {"BSBA0150"}, {"DUAL250E"}, -- cgit v1.2.3 From 3cc5ebd3a2d6247aeba81873d6b040d5d87f7db1 Mon Sep 17 00:00:00 2001 From: Jonathan LoBue Date: Fri, 16 Feb 2024 10:23:08 -0800 Subject: iio: imu: bmi323: Add ACPI Match Table Adds the ACPI match table for ASUS ROG ALLY to load the bmi323 driver with an ACPI match of "BOSC0200", and a comment about duplicate ACPI identifiers between devices using the bmc150 and bmi323 chips. Reviewed-by: Andy Shevchenko Co-developed-by: Luke D. Jones Signed-off-by: Luke D. Jones Co-developed-by: Denis Benato Signed-off-by: Denis Benato Co-developed-by: Antheas Kapenekakis Signed-off-by: Antheas Kapenekakis Signed-off-by: Jonathan LoBue Tested-by: Hans de Goede Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20240216182308.27125-1-jlobue10@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/imu/bmi323/bmi323_i2c.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/imu/bmi323/bmi323_i2c.c b/drivers/iio/imu/bmi323/bmi323_i2c.c index 20a8001b9956..52140bf05765 100644 --- a/drivers/iio/imu/bmi323/bmi323_i2c.c +++ b/drivers/iio/imu/bmi323/bmi323_i2c.c @@ -93,6 +93,26 @@ static int bmi323_i2c_probe(struct i2c_client *i2c) return bmi323_core_probe(dev); } +static const struct acpi_device_id bmi323_acpi_match[] = { + /* + * The "BOSC0200" identifier used here is not unique to bmi323 devices. + * The same "BOSC0200" identifier is found in the ACPI tables of devices + * using the bmc150 chip. This creates a conflict with duplicate ACPI + * identifiers which multiple drivers want to use. If a non-bmi323 + * device starts to load with this "BOSC0200" ACPI match here, then the + * chip ID check portion should fail because the chip IDs received (via + * i2c) are unique between bmc150 and bmi323 and the driver should + * relinquish the device. If and when a different driver (such as + * bmc150) starts to load with the "BOSC0200" ACPI match, a short reset + * should ensure that the device is not in a bad state during that + * driver initialization. This device reset does occur in both the + * bmi323 and bmc150 init sequences. + */ + { "BOSC0200" }, + { } +}; +MODULE_DEVICE_TABLE(acpi, bmi323_acpi_match); + static const struct i2c_device_id bmi323_i2c_ids[] = { { "bmi323" }, { } @@ -109,6 +129,7 @@ static struct i2c_driver bmi323_i2c_driver = { .driver = { .name = "bmi323", .of_match_table = bmi323_of_i2c_match, + .acpi_match_table = bmi323_acpi_match, }, .probe = bmi323_i2c_probe, .id_table = bmi323_i2c_ids, -- cgit v1.2.3 From f0397e27d1204a7e6581d140c2de7fd11383c6ba Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Mon, 19 Feb 2024 11:07:48 -0700 Subject: Revert "bus: mhi: core: Add support for reading MHI info from device" This reverts commit 3316ab2b45f6bf4797d8d65b22fda3cc13318890. The MHI spec owner pointed out that the SOC_HW_VERSION register is part of the BHIe segment, and only valid on devices which implement BHIe. Only a small subset of MHI devices implement BHIe so blindly accessing the register for all devices is not correct. Also, since the BHIe segment offset is not used when accessing the register, any implementation which moves the BHIe segment will result in accessing some other register. We've seen that accessing this register on AIC100 which does not support BHIe can result in initialization failures. We could try to put checks into the code to address these issues, but in the roughly 4 years this functionality has existed, no one has used it. Easier to drop this dead code and address the issues if anyone comes up with a real world use for it. Signed-off-by: Jeffrey Hugo Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240219180748.1591527-1-quic_jhugo@quicinc.com Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/host/init.c | 12 ------------ drivers/bus/mhi/host/internal.h | 6 ------ include/linux/mhi.h | 17 ----------------- 3 files changed, 35 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c index 944da46e6f11..44f934981de8 100644 --- a/drivers/bus/mhi/host/init.c +++ b/drivers/bus/mhi/host/init.c @@ -914,7 +914,6 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan; struct mhi_cmd *mhi_cmd; struct mhi_device *mhi_dev; - u32 soc_info; int ret, i; if (!mhi_cntrl || !mhi_cntrl->cntrl_dev || !mhi_cntrl->regs || @@ -989,17 +988,6 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl, mhi_cntrl->unmap_single = mhi_unmap_single_no_bb; } - /* Read the MHI device info */ - ret = mhi_read_reg(mhi_cntrl, mhi_cntrl->regs, - SOC_HW_VERSION_OFFS, &soc_info); - if (ret) - goto err_destroy_wq; - - mhi_cntrl->family_number = FIELD_GET(SOC_HW_VERSION_FAM_NUM_BMSK, soc_info); - mhi_cntrl->device_number = FIELD_GET(SOC_HW_VERSION_DEV_NUM_BMSK, soc_info); - mhi_cntrl->major_version = FIELD_GET(SOC_HW_VERSION_MAJOR_VER_BMSK, soc_info); - mhi_cntrl->minor_version = FIELD_GET(SOC_HW_VERSION_MINOR_VER_BMSK, soc_info); - mhi_cntrl->index = ida_alloc(&mhi_controller_ida, GFP_KERNEL); if (mhi_cntrl->index < 0) { ret = mhi_cntrl->index; diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h index 091244cf17c6..5fe49311b8eb 100644 --- a/drivers/bus/mhi/host/internal.h +++ b/drivers/bus/mhi/host/internal.h @@ -15,12 +15,6 @@ extern struct bus_type mhi_bus_type; #define MHI_SOC_RESET_REQ_OFFSET 0xb0 #define MHI_SOC_RESET_REQ BIT(0) -#define SOC_HW_VERSION_OFFS 0x224 -#define SOC_HW_VERSION_FAM_NUM_BMSK GENMASK(31, 28) -#define SOC_HW_VERSION_DEV_NUM_BMSK GENMASK(27, 16) -#define SOC_HW_VERSION_MAJOR_VER_BMSK GENMASK(15, 8) -#define SOC_HW_VERSION_MINOR_VER_BMSK GENMASK(7, 0) - struct mhi_ctxt { struct mhi_event_ctxt *er_ctxt; struct mhi_chan_ctxt *chan_ctxt; diff --git a/include/linux/mhi.h b/include/linux/mhi.h index 474d32cb0520..77b8c0a26674 100644 --- a/include/linux/mhi.h +++ b/include/linux/mhi.h @@ -320,10 +320,6 @@ struct mhi_controller_config { * @hw_ev_rings: Number of hardware event rings * @sw_ev_rings: Number of software event rings * @nr_irqs: Number of IRQ allocated by bus master (required) - * @family_number: MHI controller family number - * @device_number: MHI controller device number - * @major_version: MHI controller major revision number - * @minor_version: MHI controller minor revision number * @serial_number: MHI controller serial number obtained from BHI * @mhi_event: MHI event ring configurations table * @mhi_cmd: MHI command ring configurations table @@ -368,15 +364,6 @@ struct mhi_controller_config { * Fields marked as (required) need to be populated by the controller driver * before calling mhi_register_controller(). For the fields marked as (optional) * they can be populated depending on the usecase. - * - * The following fields are present for the purpose of implementing any device - * specific quirks or customizations for specific MHI revisions used in device - * by the controller drivers. The MHI stack will just populate these fields - * during mhi_register_controller(): - * family_number - * device_number - * major_version - * minor_version */ struct mhi_controller { struct device *cntrl_dev; @@ -407,10 +394,6 @@ struct mhi_controller { u32 hw_ev_rings; u32 sw_ev_rings; u32 nr_irqs; - u32 family_number; - u32 device_number; - u32 major_version; - u32 minor_version; u32 serial_number; struct mhi_event *mhi_event; -- cgit v1.2.3 From 27711860c54ccb5e80719df684f49f0bf3f8fb51 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 21 Feb 2024 09:20:19 +0300 Subject: bus: mhi: ep: check the correct variable in mhi_ep_register_controller() There is a copy and paste bug here so it checks "ev_ring_el_cache" instead of "ring_item_cache". Fixes: 62210a26cd4f ("bus: mhi: ep: Use slab allocator where applicable") Signed-off-by: Dan Carpenter Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/bebcd822-d465-45da-adae-5435ec93e6d4@moroto.mountain Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/ep/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c index 8d7a4102bdb7..f8f674adf1d4 100644 --- a/drivers/bus/mhi/ep/main.c +++ b/drivers/bus/mhi/ep/main.c @@ -1497,7 +1497,7 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl, mhi_cntrl->ring_item_cache = kmem_cache_create("mhi_ep_ring_item", sizeof(struct mhi_ep_ring_item), 0, 0, NULL); - if (!mhi_cntrl->ev_ring_el_cache) { + if (!mhi_cntrl->ring_item_cache) { ret = -ENOMEM; goto err_destroy_tre_buf_cache; } -- cgit v1.2.3 From a52354173bea2224009d52ed4439932260d389fb Mon Sep 17 00:00:00 2001 From: Krishna chaitanya chundru Date: Sun, 18 Feb 2024 14:13:39 +0530 Subject: bus: mhi: host: Change the trace string for the userspace tools mapping User space tools can't map strings if we use directly, as the string address is internal to kernel. So add trace point strings for the user space tools to map strings properly. Suggested-by: Steven Rostedt Signed-off-by: Krishna chaitanya chundru Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240218-ftrace_string-v1-1-27da85c1f844@quicinc.com Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/host/main.c | 4 ++-- drivers/bus/mhi/host/trace.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c index 2d38f6005da6..15d657af9b5b 100644 --- a/drivers/bus/mhi/host/main.c +++ b/drivers/bus/mhi/host/main.c @@ -1340,7 +1340,7 @@ static int mhi_update_channel_state(struct mhi_controller *mhi_cntrl, enum mhi_cmd_type cmd = MHI_CMD_NOP; int ret; - trace_mhi_channel_command_start(mhi_cntrl, mhi_chan, to_state, "Updating"); + trace_mhi_channel_command_start(mhi_cntrl, mhi_chan, to_state, TPS("Updating")); switch (to_state) { case MHI_CH_STATE_TYPE_RESET: write_lock_irq(&mhi_chan->lock); @@ -1407,7 +1407,7 @@ static int mhi_update_channel_state(struct mhi_controller *mhi_cntrl, write_unlock_irq(&mhi_chan->lock); } - trace_mhi_channel_command_end(mhi_cntrl, mhi_chan, to_state, "Updated"); + trace_mhi_channel_command_end(mhi_cntrl, mhi_chan, to_state, TPS("Updated")); exit_channel_update: mhi_cntrl->runtime_put(mhi_cntrl); mhi_device_put(mhi_cntrl->mhi_dev); diff --git a/drivers/bus/mhi/host/trace.h b/drivers/bus/mhi/host/trace.h index d12a98d44272..368515dcb22d 100644 --- a/drivers/bus/mhi/host/trace.h +++ b/drivers/bus/mhi/host/trace.h @@ -84,6 +84,8 @@ DEV_ST_TRANSITION_LIST #define dev_st_trans(a, b) { DEV_ST_TRANSITION_##a, b }, #define dev_st_trans_end(a, b) { DEV_ST_TRANSITION_##a, b } +#define TPS(x) tracepoint_string(x) + TRACE_EVENT(mhi_gen_tre, TP_PROTO(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, -- cgit v1.2.3 From 0dc5b8abfa03e8720cb341699e3ece194058bb03 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 20 Feb 2024 08:22:13 +0100 Subject: interconnect: constify of_phandle_args in xlate The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Acked-by: Konrad Dybcio Acked-by: Thierry Reding # Tegra Signed-off-by: Krzysztof Kozlowski Acked-by: Alim Akhtar # Samsung Link: https://lore.kernel.org/r/20240220072213.35779-1-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/core.c | 4 ++-- drivers/interconnect/qcom/icc-common.c | 3 ++- drivers/interconnect/qcom/icc-common.h | 3 ++- drivers/interconnect/samsung/exynos.c | 2 +- drivers/memory/tegra/mc.c | 2 +- drivers/memory/tegra/tegra124-emc.c | 2 +- drivers/memory/tegra/tegra124.c | 2 +- drivers/memory/tegra/tegra186-emc.c | 2 +- drivers/memory/tegra/tegra20-emc.c | 2 +- drivers/memory/tegra/tegra20.c | 2 +- drivers/memory/tegra/tegra30-emc.c | 2 +- drivers/memory/tegra/tegra30.c | 2 +- include/linux/interconnect-provider.h | 11 ++++++----- include/soc/tegra/mc.h | 7 ++++--- 14 files changed, 25 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index 50bac2d79d9b..5d1010cafed8 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -343,7 +343,7 @@ EXPORT_SYMBOL_GPL(icc_std_aggregate); * an array of icc nodes specified in the icc_onecell_data struct when * registering the provider. */ -struct icc_node *of_icc_xlate_onecell(struct of_phandle_args *spec, +struct icc_node *of_icc_xlate_onecell(const struct of_phandle_args *spec, void *data) { struct icc_onecell_data *icc_data = data; @@ -368,7 +368,7 @@ EXPORT_SYMBOL_GPL(of_icc_xlate_onecell); * Returns a valid pointer to struct icc_node_data on success or ERR_PTR() * on failure. */ -struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec) +struct icc_node_data *of_icc_get_from_provider(const struct of_phandle_args *spec) { struct icc_node *node = ERR_PTR(-EPROBE_DEFER); struct icc_node_data *data = NULL; diff --git a/drivers/interconnect/qcom/icc-common.c b/drivers/interconnect/qcom/icc-common.c index f27f4fdc4531..9b9ee113f172 100644 --- a/drivers/interconnect/qcom/icc-common.c +++ b/drivers/interconnect/qcom/icc-common.c @@ -9,7 +9,8 @@ #include "icc-common.h" -struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void *data) +struct icc_node_data *qcom_icc_xlate_extended(const struct of_phandle_args *spec, + void *data) { struct icc_node_data *ndata; struct icc_node *node; diff --git a/drivers/interconnect/qcom/icc-common.h b/drivers/interconnect/qcom/icc-common.h index 33bb2c38dff3..21c39b163948 100644 --- a/drivers/interconnect/qcom/icc-common.h +++ b/drivers/interconnect/qcom/icc-common.h @@ -8,6 +8,7 @@ #include -struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void *data); +struct icc_node_data *qcom_icc_xlate_extended(const struct of_phandle_args *spec, + void *data); #endif diff --git a/drivers/interconnect/samsung/exynos.c b/drivers/interconnect/samsung/exynos.c index 1ba14cb45d5a..c9e5361e17c5 100644 --- a/drivers/interconnect/samsung/exynos.c +++ b/drivers/interconnect/samsung/exynos.c @@ -82,7 +82,7 @@ static int exynos_generic_icc_set(struct icc_node *src, struct icc_node *dst) return 0; } -static struct icc_node *exynos_generic_icc_xlate(struct of_phandle_args *spec, +static struct icc_node *exynos_generic_icc_xlate(const struct of_phandle_args *spec, void *data) { struct exynos_icc_priv *priv = data; diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c index a083921a8968..224b488794e5 100644 --- a/drivers/memory/tegra/mc.c +++ b/drivers/memory/tegra/mc.c @@ -755,7 +755,7 @@ const char *const tegra_mc_error_names[8] = { [6] = "SMMU translation error", }; -struct icc_node *tegra_mc_icc_xlate(struct of_phandle_args *spec, void *data) +struct icc_node *tegra_mc_icc_xlate(const struct of_phandle_args *spec, void *data) { struct tegra_mc *mc = icc_provider_to_tegra_mc(data); struct icc_node *node; diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c index 00ed2b6a0d1b..47c0c19e13fd 100644 --- a/drivers/memory/tegra/tegra124-emc.c +++ b/drivers/memory/tegra/tegra124-emc.c @@ -1285,7 +1285,7 @@ to_tegra_emc_provider(struct icc_provider *provider) } static struct icc_node_data * -emc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data) +emc_of_icc_xlate_extended(const struct of_phandle_args *spec, void *data) { struct icc_provider *provider = data; struct icc_node_data *ndata; diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c index 470b7dbab2c2..9d7393e19f12 100644 --- a/drivers/memory/tegra/tegra124.c +++ b/drivers/memory/tegra/tegra124.c @@ -1170,7 +1170,7 @@ static int tegra124_mc_icc_aggreate(struct icc_node *node, u32 tag, u32 avg_bw, } static struct icc_node_data * -tegra124_mc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data) +tegra124_mc_of_icc_xlate_extended(const struct of_phandle_args *spec, void *data) { struct tegra_mc *mc = icc_provider_to_tegra_mc(data); const struct tegra_mc_client *client; diff --git a/drivers/memory/tegra/tegra186-emc.c b/drivers/memory/tegra/tegra186-emc.c index fcd4aea48bda..57d9ae12fcfe 100644 --- a/drivers/memory/tegra/tegra186-emc.c +++ b/drivers/memory/tegra/tegra186-emc.c @@ -236,7 +236,7 @@ static int tegra_emc_icc_set_bw(struct icc_node *src, struct icc_node *dst) } static struct icc_node * -tegra_emc_of_icc_xlate(struct of_phandle_args *spec, void *data) +tegra_emc_of_icc_xlate(const struct of_phandle_args *spec, void *data) { struct icc_provider *provider = data; struct icc_node *node; diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c index fd595c851a27..97cf59523b0b 100644 --- a/drivers/memory/tegra/tegra20-emc.c +++ b/drivers/memory/tegra/tegra20-emc.c @@ -950,7 +950,7 @@ to_tegra_emc_provider(struct icc_provider *provider) } static struct icc_node_data * -emc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data) +emc_of_icc_xlate_extended(const struct of_phandle_args *spec, void *data) { struct icc_provider *provider = data; struct icc_node_data *ndata; diff --git a/drivers/memory/tegra/tegra20.c b/drivers/memory/tegra/tegra20.c index aa4b97d5e732..a3022e715dee 100644 --- a/drivers/memory/tegra/tegra20.c +++ b/drivers/memory/tegra/tegra20.c @@ -390,7 +390,7 @@ static int tegra20_mc_icc_aggreate(struct icc_node *node, u32 tag, u32 avg_bw, } static struct icc_node_data * -tegra20_mc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data) +tegra20_mc_of_icc_xlate_extended(const struct of_phandle_args *spec, void *data) { struct tegra_mc *mc = icc_provider_to_tegra_mc(data); unsigned int i, idx = spec->args[0]; diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c index 9eae25c57ec6..d7b0a23c2d7d 100644 --- a/drivers/memory/tegra/tegra30-emc.c +++ b/drivers/memory/tegra/tegra30-emc.c @@ -1468,7 +1468,7 @@ to_tegra_emc_provider(struct icc_provider *provider) } static struct icc_node_data * -emc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data) +emc_of_icc_xlate_extended(const struct of_phandle_args *spec, void *data) { struct icc_provider *provider = data; struct icc_node_data *ndata; diff --git a/drivers/memory/tegra/tegra30.c b/drivers/memory/tegra/tegra30.c index 06f8b35e0a14..d3e685c8431f 100644 --- a/drivers/memory/tegra/tegra30.c +++ b/drivers/memory/tegra/tegra30.c @@ -1332,7 +1332,7 @@ static int tegra30_mc_icc_aggreate(struct icc_node *node, u32 tag, u32 avg_bw, } static struct icc_node_data * -tegra30_mc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data) +tegra30_mc_of_icc_xlate_extended(const struct of_phandle_args *spec, void *data) { struct tegra_mc *mc = icc_provider_to_tegra_mc(data); const struct tegra_mc_client *client; diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h index 7ba183f221f1..f5aef8784692 100644 --- a/include/linux/interconnect-provider.h +++ b/include/linux/interconnect-provider.h @@ -36,7 +36,7 @@ struct icc_onecell_data { struct icc_node *nodes[] __counted_by(num_nodes); }; -struct icc_node *of_icc_xlate_onecell(struct of_phandle_args *spec, +struct icc_node *of_icc_xlate_onecell(const struct of_phandle_args *spec, void *data); /** @@ -65,8 +65,9 @@ struct icc_provider { u32 peak_bw, u32 *agg_avg, u32 *agg_peak); void (*pre_aggregate)(struct icc_node *node); int (*get_bw)(struct icc_node *node, u32 *avg, u32 *peak); - struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data); - struct icc_node_data* (*xlate_extended)(struct of_phandle_args *spec, void *data); + struct icc_node* (*xlate)(const struct of_phandle_args *spec, void *data); + struct icc_node_data* (*xlate_extended)(const struct of_phandle_args *spec, + void *data); struct device *dev; int users; bool inter_set; @@ -124,7 +125,7 @@ int icc_nodes_remove(struct icc_provider *provider); void icc_provider_init(struct icc_provider *provider); int icc_provider_register(struct icc_provider *provider); void icc_provider_deregister(struct icc_provider *provider); -struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec); +struct icc_node_data *of_icc_get_from_provider(const struct of_phandle_args *spec); void icc_sync_state(struct device *dev); #else @@ -171,7 +172,7 @@ static inline int icc_provider_register(struct icc_provider *provider) static inline void icc_provider_deregister(struct icc_provider *provider) { } -static inline struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec) +static inline struct icc_node_data *of_icc_get_from_provider(const struct of_phandle_args *spec) { return ERR_PTR(-ENOTSUPP); } diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h index af1d73a7f0cd..6ee4c59db620 100644 --- a/include/soc/tegra/mc.h +++ b/include/soc/tegra/mc.h @@ -146,13 +146,14 @@ struct tegra_mc_icc_ops { int (*set)(struct icc_node *src, struct icc_node *dst); int (*aggregate)(struct icc_node *node, u32 tag, u32 avg_bw, u32 peak_bw, u32 *agg_avg, u32 *agg_peak); - struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data); - struct icc_node_data *(*xlate_extended)(struct of_phandle_args *spec, + struct icc_node* (*xlate)(const struct of_phandle_args *spec, void *data); + struct icc_node_data *(*xlate_extended)(const struct of_phandle_args *spec, void *data); int (*get_bw)(struct icc_node *node, u32 *avg, u32 *peak); }; -struct icc_node *tegra_mc_icc_xlate(struct of_phandle_args *spec, void *data); +struct icc_node *tegra_mc_icc_xlate(const struct of_phandle_args *spec, + void *data); extern const struct tegra_mc_icc_ops tegra_mc_icc_ops; struct tegra_mc_ops { -- cgit v1.2.3 From 06226d120a28f146abd3637799958a4dc4dbb7a1 Mon Sep 17 00:00:00 2001 From: Yang Jihong Date: Mon, 8 Jan 2024 12:19:06 +0000 Subject: hwtracing: hisi_ptt: Move type check to the beginning of hisi_ptt_pmu_event_init() When perf_init_event() calls perf_try_init_event() to init pmu driver, searches for the next pmu driver only when the return value is -ENOENT. Therefore, hisi_ptt_pmu_event_init() needs to check the type at the beginning of the function. Otherwise, in the case of perf-task mode, perf_try_init_event() returns -EOPNOTSUPP and skips subsequent pmu drivers, causes perf_init_event() to fail. Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device") Signed-off-by: Yang Jihong Reviewed-by: Yicong Yang Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20240108121906.3514820-1-yangjihong1@huawei.com --- drivers/hwtracing/ptt/hisi_ptt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c index c1b5fd2b8974..4bf04a977840 100644 --- a/drivers/hwtracing/ptt/hisi_ptt.c +++ b/drivers/hwtracing/ptt/hisi_ptt.c @@ -998,6 +998,9 @@ static int hisi_ptt_pmu_event_init(struct perf_event *event) int ret; u32 val; + if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type) + return -ENOENT; + if (event->cpu < 0) { dev_dbg(event->pmu->dev, "Per-task mode not supported\n"); return -EOPNOTSUPP; @@ -1006,9 +1009,6 @@ static int hisi_ptt_pmu_event_init(struct perf_event *event) if (event->attach_state & PERF_ATTACH_TASK) return -EOPNOTSUPP; - if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type) - return -ENOENT; - ret = hisi_ptt_trace_valid_filter(hisi_ptt, event->attr.config); if (ret < 0) return ret; -- cgit v1.2.3 From 2ec11b5d6d900b17c7d001fbee4751fd2aa58917 Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Thu, 22 Feb 2024 18:00:23 -0800 Subject: bus: mhi: host: pci_generic: constify modem_telit_fn980_hw_v1_config MHI expects the controller configs to be const, and all of the other ones in this file already are, so constify modem_telit_fn980_hw_v1_config. Signed-off-by: Jeff Johnson Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240222-mhi-const-bus-mhi-host-pci_generic-v1-1-d4c9b0b0a7a5@quicinc.com Signed-off-by: Manivannan Sadhasivam --- drivers/bus/mhi/host/pci_generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c index cd6cd14b3d29..51639bfcfec7 100644 --- a/drivers/bus/mhi/host/pci_generic.c +++ b/drivers/bus/mhi/host/pci_generic.c @@ -538,7 +538,7 @@ static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101) }; -static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { +static const struct mhi_controller_config modem_telit_fn980_hw_v1_config = { .max_channels = 128, .timeout_ms = 20000, .num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels), -- cgit v1.2.3 From a4f3057d19ffe1f5a7b9320303471a6725f11379 Mon Sep 17 00:00:00 2001 From: Mao Jinlong Date: Sun, 18 Feb 2024 01:43:20 -0800 Subject: coresight-tpda: Change qcom,dsb-element-size to qcom,dsb-elem-bits Change qcom,dsb-element-size to qcom,dsb-elem-bits as the unit is bit. When use "-bits" suffix, the type of the property is u32 from property-units.yaml, so use fwnode_property_read_u32 to read the property. Fixes: 57e7235aa1d1 ("coresight-tpda: Add DSB dataset support") Signed-off-by: Mao Jinlong Link: https://lore.kernel.org/r/20240218094322.22470-3-quic_jinlmao@quicinc.com Signed-off-by: Suzuki K Poulose --- drivers/hwtracing/coresight/coresight-tpda.c | 4 ++-- drivers/hwtracing/coresight/coresight-tpda.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index 6863afe7ca94..7739bc7adc44 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -69,8 +69,8 @@ static int tpdm_read_element_size(struct tpda_drvdata *drvdata, struct tpdm_drvdata *tpdm_data = dev_get_drvdata(csdev->dev.parent); if (tpdm_has_dsb_dataset(tpdm_data)) { - rc = fwnode_property_read_u8(dev_fwnode(csdev->dev.parent), - "qcom,dsb-element-size", &drvdata->dsb_esize); + rc = fwnode_property_read_u32(dev_fwnode(csdev->dev.parent), + "qcom,dsb-element-bits", &drvdata->dsb_esize); } if (tpdm_has_cmb_dataset(tpdm_data)) { rc = fwnode_property_read_u32(dev_fwnode(csdev->dev.parent), diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h index 19af64120fcf..c6af3d2da3ef 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.h +++ b/drivers/hwtracing/coresight/coresight-tpda.h @@ -36,7 +36,7 @@ struct tpda_drvdata { struct coresight_device *csdev; spinlock_t spinlock; u8 atid; - u8 dsb_esize; + u32 dsb_esize; u32 cmb_esize; }; -- cgit v1.2.3 From d0dc99c0ae00f8187f40278ec72fde4f32869599 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:16 +0000 Subject: iio: light: vl6180: Drop unused linux/of.h include Nothing from linux/of.h is used in this driver. Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-2-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/vl6180.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/vl6180.c b/drivers/iio/light/vl6180.c index d4948dfc31ff..dcadf6428a87 100644 --- a/drivers/iio/light/vl6180.c +++ b/drivers/iio/light/vl6180.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From c7618c4fcecd3b95ff24221d3d898a058af8de9e Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:17 +0000 Subject: iio: light: al3320a: Drop unused linux/of.h include Nothing from linux/of.h used in this driver. Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-3-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/al3320a.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c index d5957d85c278..105f379b9b41 100644 --- a/drivers/iio/light/al3320a.c +++ b/drivers/iio/light/al3320a.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From a5d8684fe50e2dfe59556e30996e942081759cbd Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:18 +0000 Subject: iio: light: al3010: Switch from linux/of.h to linux/mod_devicetable.h The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-4-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/light/al3010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c index 8f0119f392b7..53569587ccb7 100644 --- a/drivers/iio/light/al3010.c +++ b/drivers/iio/light/al3010.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include -- cgit v1.2.3 From 8ccc719ab942cd1018c6291edcd35c0d88b4bc4a Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:19 +0000 Subject: iio: adc: ads8688: Switch to mod_devicetable.h for struct of_device_id definition of.h was only included to get access to this structure, so include the correct header directly instead. Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-5-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-ads8688.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c index ef06a897421a..9440a268a78c 100644 --- a/drivers/iio/adc/ti-ads8688.c +++ b/drivers/iio/adc/ti-ads8688.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include -- cgit v1.2.3 From a13c7393ee280002d68d399e1af9a3b8cd247aee Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:20 +0000 Subject: iio: accel: adxl372: Switch from linux/of.h to linux/mod_devicetable.h The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-6-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/adxl372_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/adxl372_spi.c b/drivers/iio/accel/adxl372_spi.c index 75a88f16c6c9..787699773f96 100644 --- a/drivers/iio/accel/adxl372_spi.c +++ b/drivers/iio/accel/adxl372_spi.c @@ -6,8 +6,8 @@ */ #include +#include #include -#include #include #include "adxl372.h" -- cgit v1.2.3 From 22f4fae348a8059323aad78a6fa66448cb2999df Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:21 +0000 Subject: iio: accel: bma180: Switch from linux/of.h to linux/mod_devicetable.h The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-7-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bma180.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index ab4fccb24b6c..6581772cb0c4 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -13,10 +13,10 @@ */ #include +#include #include #include #include -#include #include #include #include -- cgit v1.2.3 From 1e0bda8cb8fed680f24c24c8bfc555ae3ea87fa4 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:22 +0000 Subject: iio: accel: kxsd9: Switch from linux/of.h to linux/mod_devicetable.h The only of specific definition used is of_device_id table and that is found in mod_devicetable.h not of.h Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-8-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxsd9-spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/kxsd9-spi.c b/drivers/iio/accel/kxsd9-spi.c index 1719a9f1d90a..4414670dfb43 100644 --- a/drivers/iio/accel/kxsd9-spi.c +++ b/drivers/iio/accel/kxsd9-spi.c @@ -1,9 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only #include #include -#include #include #include +#include #include #include -- cgit v1.2.3 From ffe7c46c59cf0157046f56d5cdc2206c4e78882d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 18 Feb 2024 17:33:23 +0000 Subject: iio: dac: mcp4821: Switch to including mod_devicetable.h for struct of_device_id definition. of.h was only included for this definition, so include the correct header instead. Reviewed-by: Nuno Sa Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240218173323.1023703-9-jic23@kernel.org Signed-off-by: Jonathan Cameron --- drivers/iio/dac/mcp4821.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/dac/mcp4821.c b/drivers/iio/dac/mcp4821.c index 8a0480d33845..782e8f6b7782 100644 --- a/drivers/iio/dac/mcp4821.c +++ b/drivers/iio/dac/mcp4821.c @@ -17,7 +17,7 @@ */ #include -#include +#include #include #include -- cgit v1.2.3 From 3b4ebff2a1a9e87d9682db1fcd00ed5a365d3b0c Mon Sep 17 00:00:00 2001 From: Sean Rhodes Date: Sun, 18 Feb 2024 21:53:37 +0000 Subject: iio: accel: kxcjk-1013: Implement ACPI method ROTM to retrieve mount matrix. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Implement kxj_acpi_orientation to retrieve mount matrix from ACPI ROTM method Cc: Jonathan Cameron Cc: Lars-Peter Clausen Cc: "Uwe Kleine-König" Signed-off-by: Sean Rhodes Link: https://lore.kernel.org/r/19d7a10aae5238a2c8db37da1f74edb86480e17e.1708293140.git.sean@starlabs.systems Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxcjk-1013.c | 87 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 84 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index c5f5b1ce7954..126e8bdd6d0e 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -636,6 +636,84 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on) return 0; } +#ifdef CONFIG_ACPI +static bool kxj_acpi_orientation(struct device *dev, + struct iio_mount_matrix *orientation) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_device *adev = ACPI_COMPANION(dev); + char *str; + union acpi_object *obj, *elements; + acpi_status status; + int i, j, val[3]; + bool ret = false; + + if (!acpi_has_method(adev->handle, "ROTM")) + return false; + + status = acpi_evaluate_object(adev->handle, "ROTM", NULL, &buffer); + if (ACPI_FAILURE(status)) { + dev_err(dev, "Failed to get ACPI mount matrix: %d\n", status); + return false; + } + + obj = buffer.pointer; + if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 3) { + dev_err(dev, "Unknown ACPI mount matrix package format\n"); + goto out_free_buffer; + } + + elements = obj->package.elements; + for (i = 0; i < 3; i++) { + if (elements[i].type != ACPI_TYPE_STRING) { + dev_err(dev, "Unknown ACPI mount matrix element format\n"); + goto out_free_buffer; + } + + str = elements[i].string.pointer; + if (sscanf(str, "%d %d %d", &val[0], &val[1], &val[2]) != 3) { + dev_err(dev, "Incorrect ACPI mount matrix string format\n"); + goto out_free_buffer; + } + + for (j = 0; j < 3; j++) { + switch (val[j]) { + case -1: str = "-1"; break; + case 0: str = "0"; break; + case 1: str = "1"; break; + default: + dev_err(dev, "Invalid value in ACPI mount matrix: %d\n", val[j]); + goto out_free_buffer; + } + orientation->rotation[i * 3 + j] = str; + } + } + + ret = true; + +out_free_buffer: + kfree(buffer.pointer); + return ret; +} + +static bool kxj1009_apply_acpi_orientation(struct device *dev, + struct iio_mount_matrix *orientation) +{ + struct acpi_device *adev = ACPI_COMPANION(dev); + + if (adev && acpi_dev_hid_uid_match(adev, "KIOX000A", NULL)) + return kxj_acpi_orientation(dev, orientation); + + return false; +} +#else +static bool kxj1009_apply_acpi_orientation(struct device *dev, + struct iio_mount_matrix *orientation) +{ + return false; +} +#endif + static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data) { int ret; @@ -1466,9 +1544,12 @@ static int kxcjk1013_probe(struct i2c_client *client) } else { data->active_high_intr = true; /* default polarity */ - ret = iio_read_mount_matrix(&client->dev, &data->orientation); - if (ret) - return ret; + if (!kxj1009_apply_acpi_orientation(&client->dev, &data->orientation)) { + ret = iio_read_mount_matrix(&client->dev, &data->orientation); + if (ret) + return ret; + } + } ret = devm_regulator_bulk_get_enable(&client->dev, -- cgit v1.2.3 From 58efe76197c076e3d5a1d84de115f6ec9156d6fd Mon Sep 17 00:00:00 2001 From: Arturas Moskvinas Date: Mon, 19 Feb 2024 09:41:40 +0200 Subject: iio: adc: mcp320x: Simplify device removal logic Use devm_* APIs to enable/disable regulator and to register in IIO infrastructure. Signed-off-by: Arturas Moskvinas Link: https://lore.kernel.org/r/20240219074139.193464-2-arturas.moskvinas@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/mcp320x.c | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index f3b81798b3c9..da1421bd7b62 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -371,6 +371,11 @@ static const struct mcp320x_chip_info mcp320x_chip_infos[] = { }, }; +static void mcp320x_regulator_disable(void *reg) +{ + regulator_disable(reg); +} + static int mcp320x_probe(struct spi_device *spi) { struct iio_dev *indio_dev; @@ -388,7 +393,6 @@ static int mcp320x_probe(struct spi_device *spi) indio_dev->name = spi_get_device_id(spi)->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &mcp320x_info; - spi_set_drvdata(spi, indio_dev); device_index = spi_get_device_id(spi)->driver_data; chip_info = &mcp320x_chip_infos[device_index]; @@ -445,27 +449,13 @@ static int mcp320x_probe(struct spi_device *spi) if (ret < 0) return ret; - mutex_init(&adc->lock); - - ret = iio_device_register(indio_dev); + ret = devm_add_action_or_reset(&spi->dev, mcp320x_regulator_disable, adc->reg); if (ret < 0) - goto reg_disable; - - return 0; - -reg_disable: - regulator_disable(adc->reg); - - return ret; -} + return ret; -static void mcp320x_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct mcp320x *adc = iio_priv(indio_dev); + mutex_init(&adc->lock); - iio_device_unregister(indio_dev); - regulator_disable(adc->reg); + return devm_iio_device_register(&spi->dev, indio_dev); } static const struct of_device_id mcp320x_dt_ids[] = { @@ -520,7 +510,6 @@ static struct spi_driver mcp320x_driver = { .of_match_table = mcp320x_dt_ids, }, .probe = mcp320x_probe, - .remove = mcp320x_remove, .id_table = mcp320x_id, }; module_spi_driver(mcp320x_driver); -- cgit v1.2.3 From 42e03b0d371a61478ac6fd992bb4183bdccb3028 Mon Sep 17 00:00:00 2001 From: Thomas Haemmerle Date: Mon, 19 Feb 2024 14:11:14 +0100 Subject: iio: temperature: tmp117: add support for vcc-supply Add support to specify the VCC supply which is required to power the device. According the datasheet 7.3.1 Power Up, the device needs 1.5ms after the supply voltage reaches the operating range before the communcation can begin. Signed-off-by: Thomas Haemmerle Signed-off-by: Marco Felsch Link: https://lore.kernel.org/r/20240219131114.134607-2-m.felsch@pengutronix.de Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/tmp117.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c index 059953015ae7..8972083d903a 100644 --- a/drivers/iio/temperature/tmp117.c +++ b/drivers/iio/temperature/tmp117.c @@ -9,6 +9,7 @@ * Note: This driver assumes that the sensor has been calibrated beforehand. */ +#include #include #include #include @@ -17,6 +18,7 @@ #include #include #include +#include #include @@ -148,10 +150,17 @@ static int tmp117_probe(struct i2c_client *client) struct tmp117_data *data; struct iio_dev *indio_dev; int dev_id; + int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EOPNOTSUPP; + ret = devm_regulator_get_enable(&client->dev, "vcc"); + if (ret) + return ret; + + fsleep(1500); + dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID); if (dev_id < 0) return dev_id; -- cgit v1.2.3 From 2edb22571e853d0ee69187f08f1269053f326d76 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 20 Feb 2024 17:34:49 +0200 Subject: iio: amplifiers: hmc425a: move conversion logic Move gain-dB<->code conversion logic from read_raw and write_raw to chip_info callbacks. Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240220153553.2432-2-mitrutzceclan@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/amplifiers/hmc425a.c | 125 ++++++++++++++++++++++++++------------- 1 file changed, 83 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c index ed4d72922696..dbf1c74f7845 100644 --- a/drivers/iio/amplifiers/hmc425a.c +++ b/drivers/iio/amplifiers/hmc425a.c @@ -34,6 +34,9 @@ struct hmc425a_chip_info { int gain_min; int gain_max; int default_gain; + + int (*gain_dB_to_code)(int gain, int *code); + int (*code_to_gain_dB)(int code, int *val, int *val2); }; struct hmc425a_state { @@ -44,6 +47,74 @@ struct hmc425a_state { u32 gain; }; +static int gain_dB_to_code(struct hmc425a_state *st, int val, int val2, int *code) +{ + struct hmc425a_chip_info *inf = st->chip_info; + int gain; + + if (val < 0) + gain = (val * 1000) - (val2 / 1000); + else + gain = (val * 1000) + (val2 / 1000); + + if (gain > inf->gain_max || gain < inf->gain_min) + return -EINVAL; + + return st->chip_info->gain_dB_to_code(gain, code); +} + +static int hmc425a_gain_dB_to_code(int gain, int *code) +{ + *code = ~((abs(gain) / 500) & 0x3F); + return 0; +} + +static int hmc540s_gain_dB_to_code(int gain, int *code) +{ + *code = ~((abs(gain) / 1000) & 0xF); + return 0; +} + +static int adrf5740_gain_dB_to_code(int gain, int *code) +{ + int temp = (abs(gain) / 2000) & 0xF; + + /* Bit [0-3]: 2dB 4dB 8dB 8dB */ + *code = temp & BIT(3) ? temp | BIT(2) : temp; + return 0; +} + +static int code_to_gain_dB(struct hmc425a_state *st, int *val, int *val2) +{ + return st->chip_info->code_to_gain_dB(st->gain, val, val2); +} + +static int hmc425a_code_to_gain_dB(int code, int *val, int *val2) +{ + *val = (~code * -500) / 1000; + *val2 = ((~code * -500) % 1000) * 1000; + return 0; +} + +static int hmc540s_code_to_gain_dB(int code, int *val, int *val2) +{ + *val = (~code * -1000) / 1000; + *val2 = ((~code * -1000) % 1000) * 1000; + return 0; +} + +static int adrf5740_code_to_gain_dB(int code, int *val, int *val2) +{ + /* + * Bit [0-3]: 2dB 4dB 8dB 8dB + * When BIT(3) is set, unset BIT(2) and use 3 as double the place value + */ + code = code & BIT(3) ? code & ~BIT(2) : code; + *val = (code * -2000) / 1000; + *val2 = ((code * -2000) % 1000) * 1000; + return 0; +} + static int hmc425a_write(struct iio_dev *indio_dev, u32 value) { struct hmc425a_state *st = iio_priv(indio_dev); @@ -61,30 +132,14 @@ static int hmc425a_read_raw(struct iio_dev *indio_dev, int *val2, long m) { struct hmc425a_state *st = iio_priv(indio_dev); - int code, gain = 0; int ret; mutex_lock(&st->lock); switch (m) { case IIO_CHAN_INFO_HARDWAREGAIN: - code = st->gain; - - switch (st->type) { - case ID_HMC425A: - gain = ~code * -500; - break; - case ID_HMC540S: - gain = ~code * -1000; + ret = code_to_gain_dB(st, val, val2); + if (ret) break; - case ID_ADRF5740: - code = code & BIT(3) ? code & ~BIT(2) : code; - gain = code * -2000; - break; - } - - *val = gain / 1000; - *val2 = (gain % 1000) * 1000; - ret = IIO_VAL_INT_PLUS_MICRO_DB; break; default: @@ -100,34 +155,14 @@ static int hmc425a_write_raw(struct iio_dev *indio_dev, int val2, long mask) { struct hmc425a_state *st = iio_priv(indio_dev); - struct hmc425a_chip_info *inf = st->chip_info; - int code = 0, gain; - int ret; - - if (val < 0) - gain = (val * 1000) - (val2 / 1000); - else - gain = (val * 1000) + (val2 / 1000); - - if (gain > inf->gain_max || gain < inf->gain_min) - return -EINVAL; - - switch (st->type) { - case ID_HMC425A: - code = ~((abs(gain) / 500) & 0x3F); - break; - case ID_HMC540S: - code = ~((abs(gain) / 1000) & 0xF); - break; - case ID_ADRF5740: - code = (abs(gain) / 2000) & 0xF; - code = code & BIT(3) ? code | BIT(2) : code; - break; - } + int code = 0, ret; mutex_lock(&st->lock); switch (mask) { case IIO_CHAN_INFO_HARDWAREGAIN: + ret = gain_dB_to_code(st, val, val2, &code); + if (ret) + break; st->gain = code; ret = hmc425a_write(indio_dev, st->gain); @@ -189,6 +224,8 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { .gain_min = -31500, .gain_max = 0, .default_gain = -0x40, /* set default gain -31.5db*/ + .gain_dB_to_code = hmc425a_gain_dB_to_code, + .code_to_gain_dB = hmc425a_code_to_gain_dB, }, [ID_HMC540S] = { .name = "hmc540s", @@ -198,6 +235,8 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { .gain_min = -15000, .gain_max = 0, .default_gain = -0x10, /* set default gain -15.0db*/ + .gain_dB_to_code = hmc540s_gain_dB_to_code, + .code_to_gain_dB = hmc540s_code_to_gain_dB, }, [ID_ADRF5740] = { .name = "adrf5740", @@ -207,6 +246,8 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { .gain_min = -22000, .gain_max = 0, .default_gain = 0xF, /* set default gain -22.0db*/ + .gain_dB_to_code = adrf5740_gain_dB_to_code, + .code_to_gain_dB = adrf5740_code_to_gain_dB, }, }; -- cgit v1.2.3 From 09ac57ac01e16268de9677728606c68d8d513d3a Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 20 Feb 2024 17:34:51 +0200 Subject: iio: amplifiers: hmc425a: use pointers in match table Change the match table to use pointers instead of device ids. Remove type from state as it is not used anymore. Also make the chip_info structures const. Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240220153553.2432-4-mitrutzceclan@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/amplifiers/hmc425a.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c index dbf1c74f7845..31e495e65dcb 100644 --- a/drivers/iio/amplifiers/hmc425a.c +++ b/drivers/iio/amplifiers/hmc425a.c @@ -41,15 +41,14 @@ struct hmc425a_chip_info { struct hmc425a_state { struct mutex lock; /* protect sensor state */ - struct hmc425a_chip_info *chip_info; + const struct hmc425a_chip_info *chip_info; struct gpio_descs *gpios; - enum hmc425a_type type; u32 gain; }; static int gain_dB_to_code(struct hmc425a_state *st, int val, int val2, int *code) { - struct hmc425a_chip_info *inf = st->chip_info; + const struct hmc425a_chip_info *inf = st->chip_info; int gain; if (val < 0) @@ -206,16 +205,7 @@ static const struct iio_chan_spec hmc425a_channels[] = { HMC425A_CHAN(0), }; -/* Match table for of_platform binding */ -static const struct of_device_id hmc425a_of_match[] = { - { .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A }, - { .compatible = "adi,hmc540s", .data = (void *)ID_HMC540S }, - { .compatible = "adi,adrf5740", .data = (void *)ID_ADRF5740 }, - {}, -}; -MODULE_DEVICE_TABLE(of, hmc425a_of_match); - -static struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { +static const struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { [ID_HMC425A] = { .name = "hmc425a", .channels = hmc425a_channels, @@ -262,9 +252,8 @@ static int hmc425a_probe(struct platform_device *pdev) return -ENOMEM; st = iio_priv(indio_dev); - st->type = (uintptr_t)device_get_match_data(&pdev->dev); - st->chip_info = &hmc425a_chip_info_tbl[st->type]; + st->chip_info = device_get_match_data(&pdev->dev); indio_dev->num_channels = st->chip_info->num_channels; indio_dev->channels = st->chip_info->channels; indio_dev->name = st->chip_info->name; @@ -296,6 +285,18 @@ static int hmc425a_probe(struct platform_device *pdev) return devm_iio_device_register(&pdev->dev, indio_dev); } +/* Match table for of_platform binding */ +static const struct of_device_id hmc425a_of_match[] = { + { .compatible = "adi,hmc425a", + .data = &hmc425a_chip_info_tbl[ID_HMC425A]}, + { .compatible = "adi,hmc540s", + .data = &hmc425a_chip_info_tbl[ID_HMC540S]}, + { .compatible = "adi,adrf5740", + .data = &hmc425a_chip_info_tbl[ID_ADRF5740]}, + {} +}; +MODULE_DEVICE_TABLE(of, hmc425a_of_match); + static struct platform_driver hmc425a_driver = { .driver = { .name = KBUILD_MODNAME, -- cgit v1.2.3 From a0e7a2b703d3ef8630ab27b17b4c988a0a809f99 Mon Sep 17 00:00:00 2001 From: Dumitru Ceclan Date: Tue, 20 Feb 2024 17:34:53 +0200 Subject: iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation Amplifier This adds support for LTC6373 36 V Fully-Differential Programmable-Gain Instrumentation Amplifier with 25 pA Input Bias Current. The user can program the gain to one of seven available settings through a 3-bit parallel interface (A2 to A0). Signed-off-by: Dumitru Ceclan Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20240220153553.2432-6-mitrutzceclan@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/amplifiers/hmc425a.c | 124 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 120 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/amplifiers/hmc425a.c b/drivers/iio/amplifiers/hmc425a.c index 31e495e65dcb..2ee4c0d70281 100644 --- a/drivers/iio/amplifiers/hmc425a.c +++ b/drivers/iio/amplifiers/hmc425a.c @@ -2,9 +2,10 @@ /* * HMC425A and similar Gain Amplifiers * - * Copyright 2020 Analog Devices Inc. + * Copyright 2020, 2024 Analog Devices Inc. */ +#include #include #include #include @@ -12,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -20,10 +22,24 @@ #include #include +/* + * The LTC6373 amplifier supports configuring gain using GPIO's with the following + * values (OUTPUT_V / INPUT_V): 0(shutdown), 0.25, 0.5, 1, 2, 4, 8, 16 + * + * Except for the shutdown value, all can be converted to dB using 20 * log10(x) + * From here, it is observed that all values are multiples of the '2' gain setting, + * with the correspondent of 6.020dB. + */ +#define LTC6373_CONVERSION_CONSTANT 6020 +#define LTC6373_MIN_GAIN_CODE 0x6 +#define LTC6373_CONVERSION_MASK GENMASK(2, 0) +#define LTC6373_SHUTDOWN GENMASK(2, 0) + enum hmc425a_type { ID_HMC425A, ID_HMC540S, - ID_ADRF5740 + ID_ADRF5740, + ID_LTC6373, }; struct hmc425a_chip_info { @@ -34,6 +50,8 @@ struct hmc425a_chip_info { int gain_min; int gain_max; int default_gain; + int powerdown_val; + bool has_powerdown; int (*gain_dB_to_code)(int gain, int *code); int (*code_to_gain_dB)(int code, int *val, int *val2); @@ -44,6 +62,7 @@ struct hmc425a_state { const struct hmc425a_chip_info *chip_info; struct gpio_descs *gpios; u32 gain; + bool powerdown; }; static int gain_dB_to_code(struct hmc425a_state *st, int val, int val2, int *code) @@ -58,6 +77,8 @@ static int gain_dB_to_code(struct hmc425a_state *st, int val, int val2, int *cod if (gain > inf->gain_max || gain < inf->gain_min) return -EINVAL; + if (st->powerdown) + return -EPERM; return st->chip_info->gain_dB_to_code(gain, code); } @@ -83,8 +104,17 @@ static int adrf5740_gain_dB_to_code(int gain, int *code) return 0; } +static int ltc6373_gain_dB_to_code(int gain, int *code) +{ + *code = ~(DIV_ROUND_CLOSEST(gain, LTC6373_CONVERSION_CONSTANT) + 3) + & LTC6373_CONVERSION_MASK; + return 0; +} + static int code_to_gain_dB(struct hmc425a_state *st, int *val, int *val2) { + if (st->powerdown) + return -EPERM; return st->chip_info->code_to_gain_dB(st->gain, val, val2); } @@ -114,6 +144,16 @@ static int adrf5740_code_to_gain_dB(int code, int *val, int *val2) return 0; } +static int ltc6373_code_to_gain_dB(int code, int *val, int *val2) +{ + int gain = ((~code & LTC6373_CONVERSION_MASK) - 3) * + LTC6373_CONVERSION_CONSTANT; + + *val = gain / 1000; + *val2 = (gain % 1000) * 1000; + return 0; +} + static int hmc425a_write(struct iio_dev *indio_dev, u32 value) { struct hmc425a_state *st = iio_priv(indio_dev); @@ -192,6 +232,48 @@ static const struct iio_info hmc425a_info = { .write_raw_get_fmt = &hmc425a_write_raw_get_fmt, }; +static ssize_t ltc6373_read_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + char *buf) +{ + struct hmc425a_state *st = iio_priv(indio_dev); + + return sysfs_emit(buf, "%d\n", st->powerdown); +} + +static ssize_t ltc6373_write_powerdown(struct iio_dev *indio_dev, + uintptr_t private, + const struct iio_chan_spec *chan, + const char *buf, + size_t len) +{ + struct hmc425a_state *st = iio_priv(indio_dev); + bool powerdown; + int code, ret; + + ret = kstrtobool(buf, &powerdown); + if (ret) + return ret; + + mutex_lock(&st->lock); + st->powerdown = powerdown; + code = (powerdown) ? LTC6373_SHUTDOWN : st->gain; + hmc425a_write(indio_dev, code); + mutex_unlock(&st->lock); + return len; +} + +static const struct iio_chan_spec_ext_info ltc6373_ext_info[] = { + { + .name = "powerdown", + .read = ltc6373_read_powerdown, + .write = ltc6373_write_powerdown, + .shared = IIO_SEPARATE, + }, + {} +}; + #define HMC425A_CHAN(_channel) \ { \ .type = IIO_VOLTAGE, \ @@ -201,10 +283,24 @@ static const struct iio_info hmc425a_info = { .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ } +#define LTC6373_CHAN(_channel) \ +{ \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .indexed = 1, \ + .channel = _channel, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ + .ext_info = ltc6373_ext_info, \ +} + static const struct iio_chan_spec hmc425a_channels[] = { HMC425A_CHAN(0), }; +static const struct iio_chan_spec ltc6373_channels[] = { + LTC6373_CHAN(0), +}; + static const struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { [ID_HMC425A] = { .name = "hmc425a", @@ -239,6 +335,19 @@ static const struct hmc425a_chip_info hmc425a_chip_info_tbl[] = { .gain_dB_to_code = adrf5740_gain_dB_to_code, .code_to_gain_dB = adrf5740_code_to_gain_dB, }, + [ID_LTC6373] = { + .name = "ltc6373", + .channels = ltc6373_channels, + .num_channels = ARRAY_SIZE(ltc6373_channels), + .num_gpios = 3, + .gain_min = -12041, /* gain setting x0.25*/ + .gain_max = 24082, /* gain setting x16 */ + .default_gain = LTC6373_MIN_GAIN_CODE, + .powerdown_val = LTC6373_SHUTDOWN, + .has_powerdown = true, + .gain_dB_to_code = ltc6373_gain_dB_to_code, + .code_to_gain_dB = ltc6373_code_to_gain_dB, + }, }; static int hmc425a_probe(struct platform_device *pdev) @@ -279,8 +388,13 @@ static int hmc425a_probe(struct platform_device *pdev) indio_dev->info = &hmc425a_info; indio_dev->modes = INDIO_DIRECT_MODE; - /* Set default gain */ - hmc425a_write(indio_dev, st->gain); + if (st->chip_info->has_powerdown) { + st->powerdown = true; + hmc425a_write(indio_dev, st->chip_info->powerdown_val); + } else { + /* Set default gain */ + hmc425a_write(indio_dev, st->gain); + } return devm_iio_device_register(&pdev->dev, indio_dev); } @@ -293,6 +407,8 @@ static const struct of_device_id hmc425a_of_match[] = { .data = &hmc425a_chip_info_tbl[ID_HMC540S]}, { .compatible = "adi,adrf5740", .data = &hmc425a_chip_info_tbl[ID_ADRF5740]}, + { .compatible = "adi,ltc6373", + .data = &hmc425a_chip_info_tbl[ID_LTC6373]}, {} }; MODULE_DEVICE_TABLE(of, hmc425a_of_match); -- cgit v1.2.3 From debabbb1f272f6c21b468838a0cbafc5d2c90e8b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 22 Feb 2024 09:14:25 +0300 Subject: iio: adc: ti-ads1298: Fix error code in probe() There is a copy and paste bug here, it should be "reg_vref" instead of "reg_avdd". The "priv->reg_avdd" variable is zero so it ends up returning success. Fixes: 00ef7708fa60 ("iio: adc: ti-ads1298: Add driver") Signed-off-by: Dan Carpenter Acked-by: Mike Looijmans Link: https://lore.kernel.org/r/5f393a87-ca8b-4e68-a6f4-a79f75a91ccb@moroto.mountain Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-ads1298.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti-ads1298.c b/drivers/iio/adc/ti-ads1298.c index ed895a30beed..67637f1abdc7 100644 --- a/drivers/iio/adc/ti-ads1298.c +++ b/drivers/iio/adc/ti-ads1298.c @@ -657,7 +657,7 @@ static int ads1298_probe(struct spi_device *spi) priv->reg_vref = devm_regulator_get_optional(dev, "vref"); if (IS_ERR(priv->reg_vref)) { if (PTR_ERR(priv->reg_vref) != -ENODEV) - return dev_err_probe(dev, PTR_ERR(priv->reg_avdd), + return dev_err_probe(dev, PTR_ERR(priv->reg_vref), "Failed to get vref regulator\n"); priv->reg_vref = NULL; -- cgit v1.2.3 From df621530462c681641425cfb416e411ff04b474a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 22 Feb 2024 09:15:37 +0300 Subject: iio: adc: ti-ads1298: prevent divide by zero in ads1298_set_samp_freq() The "val" variable comes from the user so we need to ensure that it's not zero. In fact, all negative values are invalid as well. Add a check for that. Fixes: 00ef7708fa60 ("iio: adc: ti-ads1298: Add driver") Acked-by: Mike Looijmans Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/c32c9087-86de-423b-8101-67b4a7f9d728@moroto.mountain Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-ads1298.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/adc/ti-ads1298.c b/drivers/iio/adc/ti-ads1298.c index 67637f1abdc7..1d1eaba3d6d1 100644 --- a/drivers/iio/adc/ti-ads1298.c +++ b/drivers/iio/adc/ti-ads1298.c @@ -258,6 +258,8 @@ static int ads1298_set_samp_freq(struct ads1298_private *priv, int val) rate = ADS1298_CLK_RATE_HZ; if (!rate) return -EINVAL; + if (val <= 0) + return -EINVAL; factor = (rate >> ADS1298_SHIFT_DR_HR) / val; if (factor >= BIT(ADS1298_SHIFT_DR_LP)) -- cgit v1.2.3 From 3bdb96c9d503d478350869cffcfd1872a57550db Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Thu, 22 Feb 2024 13:55:52 +0100 Subject: iio: temperature: ltc2983: make use of spi_get_device_match_data() Use spi_get_device_match_data() as it simplifies the code. No functional change intended... Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240222-ltc2983-misc-improv-v1-1-cf7d4457e98c@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/ltc2983.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c index fcb96c44d954..acc631857e27 100644 --- a/drivers/iio/temperature/ltc2983.c +++ b/drivers/iio/temperature/ltc2983.c @@ -1614,9 +1614,7 @@ static int ltc2983_probe(struct spi_device *spi) st = iio_priv(indio_dev); - st->info = device_get_match_data(&spi->dev); - if (!st->info) - st->info = (void *)spi_get_device_id(spi)->driver_data; + st->info = spi_get_device_match_data(spi); if (!st->info) return -ENODEV; -- cgit v1.2.3 From dccdff35d3028b41a0a6e96dee5b8f36c55ea8d1 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Thu, 22 Feb 2024 13:55:53 +0100 Subject: iio: temperature: ltc2983: rename ltc2983_parse_dt() Rename ltc2983_parse_dt() to ltc2983_parse_fw() as there's no explicit dependency on devicetree. No functional change intended... Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240222-ltc2983-misc-improv-v1-2-cf7d4457e98c@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/ltc2983.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c index acc631857e27..23f2d43fc040 100644 --- a/drivers/iio/temperature/ltc2983.c +++ b/drivers/iio/temperature/ltc2983.c @@ -1346,7 +1346,7 @@ static irqreturn_t ltc2983_irq_handler(int irq, void *data) __chan; \ }) -static int ltc2983_parse_dt(struct ltc2983_data *st) +static int ltc2983_parse_fw(struct ltc2983_data *st) { struct device *dev = &st->spi->dev; struct fwnode_handle *child; @@ -1630,7 +1630,7 @@ static int ltc2983_probe(struct spi_device *spi) st->eeprom_key = cpu_to_be32(LTC2983_EEPROM_KEY); spi_set_drvdata(spi, st); - ret = ltc2983_parse_dt(st); + ret = ltc2983_parse_fw(st); if (ret) return ret; -- cgit v1.2.3 From 5cad30ab5021968ed031f681361fc5d3d1d3cd7e Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Thu, 22 Feb 2024 13:55:55 +0100 Subject: iio: temperature: ltc2983: explicitly set the name in chip_info Getting the part name with 'spi_get_device_id(spi)->name' is not a very good pattern. Hence, explicitly add the name in the struct chip_info and use that instead. Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240222-ltc2983-misc-improv-v1-4-cf7d4457e98c@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/ltc2983.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c index 23f2d43fc040..39447c786af3 100644 --- a/drivers/iio/temperature/ltc2983.c +++ b/drivers/iio/temperature/ltc2983.c @@ -207,6 +207,7 @@ enum { container_of(_sensor, struct ltc2983_temp, sensor) struct ltc2983_chip_info { + const char *name; unsigned int max_channels_nr; bool has_temp; bool has_eeprom; @@ -1605,7 +1606,6 @@ static int ltc2983_probe(struct spi_device *spi) struct ltc2983_data *st; struct iio_dev *indio_dev; struct gpio_desc *gpio; - const char *name = spi_get_device_id(spi)->name; int ret; indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); @@ -1655,7 +1655,7 @@ static int ltc2983_probe(struct spi_device *spi) return ret; ret = devm_request_irq(&spi->dev, spi->irq, ltc2983_irq_handler, - IRQF_TRIGGER_RISING, name, st); + IRQF_TRIGGER_RISING, st->info->name, st); if (ret) { dev_err(&spi->dev, "failed to request an irq, %d", ret); return ret; @@ -1670,7 +1670,7 @@ static int ltc2983_probe(struct spi_device *spi) return ret; } - indio_dev->name = name; + indio_dev->name = st->info->name; indio_dev->num_channels = st->iio_channels; indio_dev->channels = st->iio_chan; indio_dev->modes = INDIO_DIRECT_MODE; @@ -1701,15 +1701,25 @@ static DEFINE_SIMPLE_DEV_PM_OPS(ltc2983_pm_ops, ltc2983_suspend, ltc2983_resume); static const struct ltc2983_chip_info ltc2983_chip_info_data = { + .name = "ltc2983", .max_channels_nr = 20, }; static const struct ltc2983_chip_info ltc2984_chip_info_data = { + .name = "ltc2984", .max_channels_nr = 20, .has_eeprom = true, }; static const struct ltc2983_chip_info ltc2986_chip_info_data = { + .name = "ltc2986", + .max_channels_nr = 10, + .has_temp = true, + .has_eeprom = true, +}; + +static const struct ltc2983_chip_info ltm2985_chip_info_data = { + .name = "ltm2985", .max_channels_nr = 10, .has_temp = true, .has_eeprom = true, @@ -1719,7 +1729,7 @@ static const struct spi_device_id ltc2983_id_table[] = { { "ltc2983", (kernel_ulong_t)<c2983_chip_info_data }, { "ltc2984", (kernel_ulong_t)<c2984_chip_info_data }, { "ltc2986", (kernel_ulong_t)<c2986_chip_info_data }, - { "ltm2985", (kernel_ulong_t)<c2986_chip_info_data }, + { "ltm2985", (kernel_ulong_t)<m2985_chip_info_data }, {}, }; MODULE_DEVICE_TABLE(spi, ltc2983_id_table); @@ -1728,7 +1738,7 @@ static const struct of_device_id ltc2983_of_match[] = { { .compatible = "adi,ltc2983", .data = <c2983_chip_info_data }, { .compatible = "adi,ltc2984", .data = <c2984_chip_info_data }, { .compatible = "adi,ltc2986", .data = <c2986_chip_info_data }, - { .compatible = "adi,ltm2985", .data = <c2986_chip_info_data }, + { .compatible = "adi,ltm2985", .data = <m2985_chip_info_data }, {}, }; MODULE_DEVICE_TABLE(of, ltc2983_of_match); -- cgit v1.2.3 From 0fb528c8255bd2de6a2fba26ed28d75a7f0cb630 Mon Sep 17 00:00:00 2001 From: Marius Cristea Date: Thu, 22 Feb 2024 18:42:06 +0200 Subject: iio: adc: adding support for PAC193x This is the iio driver for Microchip PAC193X series of Power Monitor with Accumulator chip family. Signed-off-by: Marius Cristea Link: https://lore.kernel.org/r/20240222164206.65700-3-marius.cristea@microchip.com Signed-off-by: Jonathan Cameron --- .../ABI/testing/sysfs-bus-iio-adc-pac1934 | 9 + MAINTAINERS | 7 + drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/pac1934.c | 1636 ++++++++++++++++++++ 5 files changed, 1664 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 create mode 100644 drivers/iio/adc/pac1934.c (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 b/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 new file mode 100644 index 000000000000..625b7f867847 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-pac1934 @@ -0,0 +1,9 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_shunt_resistorY +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + The value of the shunt resistor may be known only at runtime + and set by a client application. This attribute allows to + set its value in micro-ohms. X is the IIO index of the device. + Y is the channel number. The value is used to calculate + current, power and accumulated energy. diff --git a/MAINTAINERS b/MAINTAINERS index d59d52ec8b06..031600dd6c2a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14426,6 +14426,13 @@ F: Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml F: drivers/nvmem/microchip-otpc.c F: include/dt-bindings/nvmem/microchip,sama7g5-otpc.h +MICROCHIP PAC1934 POWER/ENERGY MONITOR DRIVER +M: Marius Cristea +L: linux-iio@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml +F: drivers/iio/adc/pac1934.c + MICROCHIP PCI1XXXX GP DRIVER M: Vaibhaav Ram T.L M: Kumaravel Thiagarajan diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index d4462c202784..0d9282fa67f5 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -930,6 +930,17 @@ config NPCM_ADC This driver can also be built as a module. If so, the module will be called npcm_adc. +config PAC1934 + tristate "Microchip Technology PAC1934 driver" + depends on I2C + help + Say yes here to build support for Microchip Technology's PAC1931, + PAC1932, PAC1933, PAC1934 Single/Multi-Channel Power Monitor with + Accumulator. + + This driver can also be built as a module. If so, the module + will be called pac1934. + config PALMAS_GPADC tristate "TI Palmas General Purpose ADC" depends on MFD_PALMAS diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index a64326f40fcb..b3c434722364 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_MP2629_ADC) += mp2629_adc.o obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_NPCM_ADC) += npcm_adc.o +obj-$(CONFIG_PAC1934) += pac1934.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o diff --git a/drivers/iio/adc/pac1934.c b/drivers/iio/adc/pac1934.c new file mode 100644 index 000000000000..e0c2742da523 --- /dev/null +++ b/drivers/iio/adc/pac1934.c @@ -0,0 +1,1636 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IIO driver for PAC1934 Multi-Channel DC Power/Energy Monitor + * + * Copyright (C) 2017-2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Bogdan Bolocan + * Author: Victor Tudose + * Author: Marius Cristea + * + * Datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here: + * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * maximum accumulation time should be (17 * 60 * 1000) around 17 minutes@1024 sps + * till PAC1934 accumulation registers starts to saturate + */ +#define PAC1934_MAX_RFSH_LIMIT_MS 60000 +/* 50msec is the timeout for validity of the cached registers */ +#define PAC1934_MIN_POLLING_TIME_MS 50 +/* + * 1000usec is the minimum wait time for normal conversions when sample + * rate doesn't change + */ +#define PAC1934_MIN_UPDATE_WAIT_TIME_US 1000 + +/* 32000mV */ +#define PAC1934_VOLTAGE_MILLIVOLTS_MAX 32000 +/* voltage bits resolution when set for unsigned values */ +#define PAC1934_VOLTAGE_U_RES 16 +/* voltage bits resolution when set for signed values */ +#define PAC1934_VOLTAGE_S_RES 15 + +/* + * max signed value that can be stored on 32 bits and 8 digits fractional value + * (2^31 - 1) * 10^8 + 99999999 + */ +#define PAC_193X_MAX_POWER_ACC 214748364799999999LL +/* + * min signed value that can be stored on 32 bits and 8 digits fractional value + * -(2^31) * 10^8 - 99999999 + */ +#define PAC_193X_MIN_POWER_ACC -214748364899999999LL + +#define PAC1934_MAX_NUM_CHANNELS 4 + +#define PAC1934_MEAS_REG_LEN 76 +#define PAC1934_CTRL_REG_LEN 12 + +#define PAC1934_DEFAULT_CHIP_SAMP_SPEED_HZ 1024 + +/* I2C address map */ +#define PAC1934_REFRESH_REG_ADDR 0x00 +#define PAC1934_CTRL_REG_ADDR 0x01 +#define PAC1934_ACC_COUNT_REG_ADDR 0x02 +#define PAC1934_VPOWER_ACC_1_ADDR 0x03 +#define PAC1934_VPOWER_ACC_2_ADDR 0x04 +#define PAC1934_VPOWER_ACC_3_ADDR 0x05 +#define PAC1934_VPOWER_ACC_4_ADDR 0x06 +#define PAC1934_VBUS_1_ADDR 0x07 +#define PAC1934_VBUS_2_ADDR 0x08 +#define PAC1934_VBUS_3_ADDR 0x09 +#define PAC1934_VBUS_4_ADDR 0x0A +#define PAC1934_VSENSE_1_ADDR 0x0B +#define PAC1934_VSENSE_2_ADDR 0x0C +#define PAC1934_VSENSE_3_ADDR 0x0D +#define PAC1934_VSENSE_4_ADDR 0x0E +#define PAC1934_VBUS_AVG_1_ADDR 0x0F +#define PAC1934_VBUS_AVG_2_ADDR 0x10 +#define PAC1934_VBUS_AVG_3_ADDR 0x11 +#define PAC1934_VBUS_AVG_4_ADDR 0x12 +#define PAC1934_VSENSE_AVG_1_ADDR 0x13 +#define PAC1934_VSENSE_AVG_2_ADDR 0x14 +#define PAC1934_VSENSE_AVG_3_ADDR 0x15 +#define PAC1934_VSENSE_AVG_4_ADDR 0x16 +#define PAC1934_VPOWER_1_ADDR 0x17 +#define PAC1934_VPOWER_2_ADDR 0x18 +#define PAC1934_VPOWER_3_ADDR 0x19 +#define PAC1934_VPOWER_4_ADDR 0x1A +#define PAC1934_REFRESH_V_REG_ADDR 0x1F +#define PAC1934_CTRL_STAT_REGS_ADDR 0x1C +#define PAC1934_PID_REG_ADDR 0xFD +#define PAC1934_MID_REG_ADDR 0xFE +#define PAC1934_RID_REG_ADDR 0xFF + +/* PRODUCT ID REGISTER + MANUFACTURER ID REGISTER + REVISION ID REGISTER */ +#define PAC1934_ID_REG_LEN 3 +#define PAC1934_PID_IDX 0 +#define PAC1934_MID_IDX 1 +#define PAC1934_RID_IDX 2 + +#define PAC1934_ACPI_GET_NAMES_AND_MOHMS_VALS 1 +#define PAC1934_ACPI_GET_UOHMS_VALS 2 +#define PAC1934_ACPI_GET_BIPOLAR_SETTINGS 4 +#define PAC1934_ACPI_GET_SAMP 5 + +#define PAC1934_SAMPLE_RATE_SHIFT 6 + +#define PAC1934_VBUS_SENSE_REG_LEN 2 +#define PAC1934_ACC_REG_LEN 3 +#define PAC1934_VPOWER_REG_LEN 4 +#define PAC1934_VPOWER_ACC_REG_LEN 6 +#define PAC1934_MAX_REGISTER_LENGTH 6 + +#define PAC1934_CUSTOM_ATTR_FOR_CHANNEL 1 + +/* + * relative offsets when using multi-byte reads/writes even though these + * bytes are read one after the other, they are not at adjacent memory + * locations within the I2C memory map. The chip can skip some addresses + */ +#define PAC1934_CHANNEL_DIS_REG_OFF 0 +#define PAC1934_NEG_PWR_REG_OFF 1 + +/* + * when reading/writing multiple bytes from offset PAC1934_CHANNEL_DIS_REG_OFF, + * the chip jumps over the 0x1E (REFRESH_G) and 0x1F (REFRESH_V) offsets + */ +#define PAC1934_SLOW_REG_OFF 2 +#define PAC1934_CTRL_ACT_REG_OFF 3 +#define PAC1934_CHANNEL_DIS_ACT_REG_OFF 4 +#define PAC1934_NEG_PWR_ACT_REG_OFF 5 +#define PAC1934_CTRL_LAT_REG_OFF 6 +#define PAC1934_CHANNEL_DIS_LAT_REG_OFF 7 +#define PAC1934_NEG_PWR_LAT_REG_OFF 8 +#define PAC1934_PID_REG_OFF 9 +#define PAC1934_MID_REG_OFF 10 +#define PAC1934_REV_REG_OFF 11 +#define PAC1934_CTRL_STATUS_INFO_LEN 12 + +#define PAC1934_MID 0x5D +#define PAC1931_PID 0x58 +#define PAC1932_PID 0x59 +#define PAC1933_PID 0x5A +#define PAC1934_PID 0x5B + +/* Scale constant = (10^3 * 3.2 * 10^9 / 2^28) for mili Watt-second */ +#define PAC1934_SCALE_CONSTANT 11921 + +#define PAC1934_MAX_VPOWER_RSHIFTED_BY_28B 11921 +#define PAC1934_MAX_VSENSE_RSHIFTED_BY_16B 1525 + +#define PAC1934_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr) + +#define PAC1934_CRTL_SAMPLE_RATE_MASK GENMASK(7, 6) +#define PAC1934_CHAN_SLEEP_MASK BIT(5) +#define PAC1934_CHAN_SLEEP_SET BIT(5) +#define PAC1934_CHAN_SINGLE_MASK BIT(4) +#define PAC1934_CHAN_SINGLE_SHOT_SET BIT(4) +#define PAC1934_CHAN_ALERT_MASK BIT(3) +#define PAC1934_CHAN_ALERT_EN BIT(3) +#define PAC1934_CHAN_ALERT_CC_MASK BIT(2) +#define PAC1934_CHAN_ALERT_CC_EN BIT(2) +#define PAC1934_CHAN_OVF_ALERT_MASK BIT(1) +#define PAC1934_CHAN_OVF_ALERT_EN BIT(1) +#define PAC1934_CHAN_OVF_MASK BIT(0) + +#define PAC1934_CHAN_DIS_CH1_OFF_MASK BIT(7) +#define PAC1934_CHAN_DIS_CH2_OFF_MASK BIT(6) +#define PAC1934_CHAN_DIS_CH3_OFF_MASK BIT(5) +#define PAC1934_CHAN_DIS_CH4_OFF_MASK BIT(4) +#define PAC1934_SMBUS_TIMEOUT_MASK BIT(3) +#define PAC1934_SMBUS_BYTECOUNT_MASK BIT(2) +#define PAC1934_SMBUS_NO_SKIP_MASK BIT(1) + +#define PAC1934_NEG_PWR_CH1_BIDI_MASK BIT(7) +#define PAC1934_NEG_PWR_CH2_BIDI_MASK BIT(6) +#define PAC1934_NEG_PWR_CH3_BIDI_MASK BIT(5) +#define PAC1934_NEG_PWR_CH4_BIDI_MASK BIT(4) +#define PAC1934_NEG_PWR_CH1_BIDV_MASK BIT(3) +#define PAC1934_NEG_PWR_CH2_BIDV_MASK BIT(2) +#define PAC1934_NEG_PWR_CH3_BIDV_MASK BIT(1) +#define PAC1934_NEG_PWR_CH4_BIDV_MASK BIT(0) + +/* + * Universal Unique Identifier (UUID), + * 033771E0-1705-47B4-9535-D1BBE14D9A09, + * is reserved to Microchip for the PAC1934. + */ +#define PAC1934_DSM_UUID "033771E0-1705-47B4-9535-D1BBE14D9A09" + +enum pac1934_ids { + PAC1931, + PAC1932, + PAC1933, + PAC1934 +}; + +enum pac1934_samps { + PAC1934_SAMP_1024SPS, + PAC1934_SAMP_256SPS, + PAC1934_SAMP_64SPS, + PAC1934_SAMP_8SPS +}; + +/* + * these indexes are exactly describing the element order within a single + * PAC1934 phys channel IIO channel descriptor; see the static const struct + * iio_chan_spec pac1934_single_channel[] declaration + */ +enum pac1934_ch_idx { + PAC1934_CH_ENERGY, + PAC1934_CH_POWER, + PAC1934_CH_VOLTAGE, + PAC1934_CH_CURRENT, + PAC1934_CH_VOLTAGE_AVERAGE, + PAC1934_CH_CURRENT_AVERAGE +}; + +/** + * struct pac1934_features - features of a pac1934 instance + * @phys_channels: number of physical channels supported by the chip + * @name: chip's name + */ +struct pac1934_features { + u8 phys_channels; + const char *name; +}; + +struct samp_rate_mapping { + u16 samp_rate; + u8 shift2value; +}; + +static const unsigned int samp_rate_map_tbl[] = { + [PAC1934_SAMP_1024SPS] = 1024, + [PAC1934_SAMP_256SPS] = 256, + [PAC1934_SAMP_64SPS] = 64, + [PAC1934_SAMP_8SPS] = 8, +}; + +static const struct pac1934_features pac1934_chip_config[] = { + [PAC1931] = { + .phys_channels = 1, + .name = "pac1931", + }, + [PAC1932] = { + .phys_channels = 2, + .name = "pac1932", + }, + [PAC1933] = { + .phys_channels = 3, + .name = "pac1933", + }, + [PAC1934] = { + .phys_channels = 4, + .name = "pac1934", + }, +}; + +/** + * struct reg_data - data from the registers + * @meas_regs: snapshot of raw measurements registers + * @ctrl_regs: snapshot of control registers + * @energy_sec_acc: snapshot of energy values + * @vpower_acc: accumulated vpower values + * @vpower: snapshot of vpower registers + * @vbus: snapshot of vbus registers + * @vbus_avg: averages of vbus registers + * @vsense: snapshot of vsense registers + * @vsense_avg: averages of vsense registers + * @num_enabled_channels: count of how many chip channels are currently enabled + */ +struct reg_data { + u8 meas_regs[PAC1934_MEAS_REG_LEN]; + u8 ctrl_regs[PAC1934_CTRL_REG_LEN]; + s64 energy_sec_acc[PAC1934_MAX_NUM_CHANNELS]; + s64 vpower_acc[PAC1934_MAX_NUM_CHANNELS]; + s32 vpower[PAC1934_MAX_NUM_CHANNELS]; + s32 vbus[PAC1934_MAX_NUM_CHANNELS]; + s32 vbus_avg[PAC1934_MAX_NUM_CHANNELS]; + s32 vsense[PAC1934_MAX_NUM_CHANNELS]; + s32 vsense_avg[PAC1934_MAX_NUM_CHANNELS]; + u8 num_enabled_channels; +}; + +/** + * struct pac1934_chip_info - information about the chip + * @client: the i2c-client attached to the device + * @lock: synchronize access to driver's state members + * @work_chip_rfsh: work queue used for refresh commands + * @phys_channels: phys channels count + * @active_channels: array of values, true means that channel is active + * @enable_energy: array of values, true means that channel energy is measured + * @bi_dir: array of bools, true means that channel is bidirectional + * @chip_variant: chip variant + * @chip_revision: chip revision + * @shunts: shunts + * @chip_reg_data: chip reg data + * @sample_rate_value: sampling frequency + * @labels: table with channels labels + * @iio_info: iio_info + * @tstamp: chip's uptime + */ +struct pac1934_chip_info { + struct i2c_client *client; + struct mutex lock; /* synchronize access to driver's state members */ + struct delayed_work work_chip_rfsh; + u8 phys_channels; + bool active_channels[PAC1934_MAX_NUM_CHANNELS]; + bool enable_energy[PAC1934_MAX_NUM_CHANNELS]; + bool bi_dir[PAC1934_MAX_NUM_CHANNELS]; + u8 chip_variant; + u8 chip_revision; + u32 shunts[PAC1934_MAX_NUM_CHANNELS]; + struct reg_data chip_reg_data; + s32 sample_rate_value; + char *labels[PAC1934_MAX_NUM_CHANNELS]; + struct iio_info iio_info; + unsigned long tstamp; +}; + +#define TO_PAC1934_CHIP_INFO(d) container_of(d, struct pac1934_chip_info, work_chip_rfsh) + +#define PAC1934_VPOWER_ACC_CHANNEL(_index, _si, _address) { \ + .type = IIO_ENERGY, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_ENABLE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 48, \ + .storagebits = 64, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VBUS_CHANNEL(_index, _si, _address) { \ + .type = IIO_VOLTAGE, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VBUS_AVG_CHANNEL(_index, _si, _address) { \ + .type = IIO_VOLTAGE, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VSENSE_CHANNEL(_index, _si, _address) { \ + .type = IIO_CURRENT, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VSENSE_AVG_CHANNEL(_index, _si, _address) { \ + .type = IIO_CURRENT, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + } \ +} + +#define PAC1934_VPOWER_CHANNEL(_index, _si, _address) { \ + .type = IIO_POWER, \ + .address = (_address), \ + .indexed = 1, \ + .channel = (_index), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = (_si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 28, \ + .storagebits = 32, \ + .shift = 4, \ + .endianness = IIO_CPU, \ + } \ +} + +static const struct iio_chan_spec pac1934_single_channel[] = { + PAC1934_VPOWER_ACC_CHANNEL(0, 0, PAC1934_VPOWER_ACC_1_ADDR), + PAC1934_VPOWER_CHANNEL(0, 0, PAC1934_VPOWER_1_ADDR), + PAC1934_VBUS_CHANNEL(0, 0, PAC1934_VBUS_1_ADDR), + PAC1934_VSENSE_CHANNEL(0, 0, PAC1934_VSENSE_1_ADDR), + PAC1934_VBUS_AVG_CHANNEL(0, 0, PAC1934_VBUS_AVG_1_ADDR), + PAC1934_VSENSE_AVG_CHANNEL(0, 0, PAC1934_VSENSE_AVG_1_ADDR), +}; + +/* Low-level I2c functions used to transfer up to 76 bytes at once */ +static int pac1934_i2c_read(struct i2c_client *client, u8 reg_addr, + void *databuf, u8 len) +{ + int ret; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .len = 1, + .buf = (u8 *)®_addr, + }, + { + .addr = client->addr, + .len = len, + .buf = databuf, + .flags = I2C_M_RD + } + }; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + + return 0; +} + +static int pac1934_get_samp_rate_idx(struct pac1934_chip_info *info, + u32 new_samp_rate) +{ + int cnt; + + for (cnt = 0; cnt < ARRAY_SIZE(samp_rate_map_tbl); cnt++) + if (new_samp_rate == samp_rate_map_tbl[cnt]) + return cnt; + + /* not a valid sample rate value */ + return -EINVAL; +} + +static ssize_t pac1934_shunt_value_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct pac1934_chip_info *info = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + + return sysfs_emit(buf, "%u\n", info->shunts[this_attr->address]); +} + +static ssize_t pac1934_shunt_value_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct pac1934_chip_info *info = iio_priv(indio_dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int sh_val; + + if (kstrtouint(buf, 10, &sh_val)) { + dev_err(dev, "Shunt value is not valid\n"); + return -EINVAL; + } + + scoped_guard(mutex, &info->lock) + info->shunts[this_attr->address] = sh_val; + + return count; +} + +static int pac1934_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + const int **vals, int *type, int *length, long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + *type = IIO_VAL_INT; + *vals = samp_rate_map_tbl; + *length = ARRAY_SIZE(samp_rate_map_tbl); + return IIO_AVAIL_LIST; + } + + return -EINVAL; +} + +static int pac1934_send_refresh(struct pac1934_chip_info *info, + u8 refresh_cmd, u32 wait_time) +{ + /* this function only sends REFRESH or REFRESH_V */ + struct i2c_client *client = info->client; + int ret; + u8 bidir_reg; + bool revision_bug = false; + + if (info->chip_revision == 2 || info->chip_revision == 3) { + /* + * chip rev 2 and 3 bug workaround + * see: PAC1934 Family Data Sheet Errata DS80000836A.pdf + */ + revision_bug = true; + + bidir_reg = + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDI_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDI_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDI_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDI_MASK, info->bi_dir[3]) | + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDV_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDV_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDV_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDV_MASK, info->bi_dir[3]); + + ret = i2c_smbus_write_byte_data(client, + PAC1934_CTRL_STAT_REGS_ADDR + + PAC1934_NEG_PWR_REG_OFF, + bidir_reg); + if (ret) + return ret; + } + + ret = i2c_smbus_write_byte(client, refresh_cmd); + if (ret) { + dev_err(&client->dev, "%s - cannot send 0x%02X\n", + __func__, refresh_cmd); + return ret; + } + + if (revision_bug) { + /* + * chip rev 2 and 3 bug workaround - write again the same + * register write the updated registers back + */ + ret = i2c_smbus_write_byte_data(client, + PAC1934_CTRL_STAT_REGS_ADDR + + PAC1934_NEG_PWR_REG_OFF, bidir_reg); + if (ret) + return ret; + } + + /* register data retrieval timestamp */ + info->tstamp = jiffies; + + /* wait till the data is available */ + usleep_range(wait_time, wait_time + 100); + + return ret; +} + +static int pac1934_reg_snapshot(struct pac1934_chip_info *info, + bool do_refresh, u8 refresh_cmd, u32 wait_time) +{ + int ret; + struct i2c_client *client = info->client; + u8 samp_shift, ctrl_regs_tmp; + u8 *offset_reg_data_p; + u16 tmp_value; + u32 samp_rate, cnt, tmp; + s64 curr_energy, inc; + u64 tmp_energy; + struct reg_data *reg_data; + + guard(mutex)(&info->lock); + + if (do_refresh) { + ret = pac1934_send_refresh(info, refresh_cmd, wait_time); + if (ret < 0) { + dev_err(&client->dev, + "%s - cannot send refresh\n", + __func__); + return ret; + } + } + + ret = i2c_smbus_read_i2c_block_data(client, PAC1934_CTRL_STAT_REGS_ADDR, + PAC1934_CTRL_REG_LEN, + (u8 *)info->chip_reg_data.ctrl_regs); + if (ret < 0) { + dev_err(&client->dev, + "%s - cannot read ctrl/status registers\n", + __func__); + return ret; + } + + reg_data = &info->chip_reg_data; + + /* read the data registers */ + ret = pac1934_i2c_read(client, PAC1934_ACC_COUNT_REG_ADDR, + (u8 *)reg_data->meas_regs, PAC1934_MEAS_REG_LEN); + if (ret) { + dev_err(&client->dev, + "%s - cannot read ACC_COUNT register: %d:%d\n", + __func__, ret, PAC1934_MEAS_REG_LEN); + return ret; + } + + /* see how much shift is required by the sample rate */ + samp_rate = samp_rate_map_tbl[((reg_data->ctrl_regs[PAC1934_CTRL_LAT_REG_OFF]) >> 6)]; + samp_shift = get_count_order(samp_rate); + + ctrl_regs_tmp = reg_data->ctrl_regs[PAC1934_CHANNEL_DIS_LAT_REG_OFF]; + offset_reg_data_p = ®_data->meas_regs[PAC1934_ACC_REG_LEN]; + + /* start with VPOWER_ACC */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + /* check if the channel is active, skip all fields if disabled */ + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + /* skip if the energy accumulation is disabled */ + if (info->enable_energy[cnt]) { + curr_energy = info->chip_reg_data.energy_sec_acc[cnt]; + + tmp_energy = get_unaligned_be48(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vpower_acc[cnt] = sign_extend64(tmp_energy, 47); + else + reg_data->vpower_acc[cnt] = tmp_energy; + + /* + * compute the scaled to 1 second accumulated energy value; + * energy accumulator scaled to 1sec = VPOWER_ACC/2^samp_shift + * the chip's sampling rate is 2^samp_shift samples/sec + */ + inc = (reg_data->vpower_acc[cnt] >> samp_shift); + + /* add the power_acc field */ + curr_energy += inc; + + clamp(curr_energy, PAC_193X_MIN_POWER_ACC, PAC_193X_MAX_POWER_ACC); + + reg_data->energy_sec_acc[cnt] = curr_energy; + } + + offset_reg_data_p += PAC1934_VPOWER_ACC_REG_LEN; + } + + /* continue with VBUS */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vbus[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vbus[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VSENSE */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vsense[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vsense[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VBUS_AVG */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vbus_avg[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vbus_avg[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VSENSE_AVG */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp_value = get_unaligned_be16(offset_reg_data_p); + + if (info->bi_dir[cnt]) + reg_data->vsense_avg[cnt] = sign_extend32((u32)(tmp_value), 15); + else + reg_data->vsense_avg[cnt] = tmp_value; + + offset_reg_data_p += PAC1934_VBUS_SENSE_REG_LEN; + } + + /* VPOWER */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if ((ctrl_regs_tmp << cnt) & 0x80) + continue; + + tmp = get_unaligned_be32(offset_reg_data_p) >> 4; + + if (info->bi_dir[cnt]) + reg_data->vpower[cnt] = sign_extend32(tmp, 27); + else + reg_data->vpower[cnt] = tmp; + + offset_reg_data_p += PAC1934_VPOWER_REG_LEN; + } + + return 0; +} + +static int pac1934_retrieve_data(struct pac1934_chip_info *info, + u32 wait_time) +{ + int ret = 0; + + /* + * check if the minimal elapsed time has passed and if so, + * re-read the chip, otherwise the cached info is just fine + */ + if (time_after(jiffies, info->tstamp + msecs_to_jiffies(PAC1934_MIN_POLLING_TIME_MS))) { + ret = pac1934_reg_snapshot(info, true, PAC1934_REFRESH_REG_ADDR, + wait_time); + + /* + * Re-schedule the work for the read registers on timeout + * (to prevent chip registers saturation) + */ + mod_delayed_work(system_wq, &info->work_chip_rfsh, + msecs_to_jiffies(PAC1934_MAX_RFSH_LIMIT_MS)); + } + + return ret; +} + +static int pac1934_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct pac1934_chip_info *info = iio_priv(indio_dev); + s64 curr_energy; + int ret, channel = chan->channel - 1; + + ret = pac1934_retrieve_data(info, PAC1934_MIN_UPDATE_WAIT_TIME_US); + if (ret < 0) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_VOLTAGE: + *val = info->chip_reg_data.vbus[channel]; + return IIO_VAL_INT; + case IIO_CURRENT: + *val = info->chip_reg_data.vsense[channel]; + return IIO_VAL_INT; + case IIO_POWER: + *val = info->chip_reg_data.vpower[channel]; + return IIO_VAL_INT; + case IIO_ENERGY: + curr_energy = info->chip_reg_data.energy_sec_acc[channel]; + *val = (u32)curr_energy; + *val2 = (u32)(curr_energy >> 32); + return IIO_VAL_INT_64; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_AVERAGE_RAW: + switch (chan->type) { + case IIO_VOLTAGE: + *val = info->chip_reg_data.vbus_avg[channel]; + return IIO_VAL_INT; + case IIO_CURRENT: + *val = info->chip_reg_data.vsense_avg[channel]; + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->address) { + /* Voltages - scale for millivolts */ + case PAC1934_VBUS_1_ADDR: + case PAC1934_VBUS_2_ADDR: + case PAC1934_VBUS_3_ADDR: + case PAC1934_VBUS_4_ADDR: + case PAC1934_VBUS_AVG_1_ADDR: + case PAC1934_VBUS_AVG_2_ADDR: + case PAC1934_VBUS_AVG_3_ADDR: + case PAC1934_VBUS_AVG_4_ADDR: + *val = PAC1934_VOLTAGE_MILLIVOLTS_MAX; + if (chan->scan_type.sign == 'u') + *val2 = PAC1934_VOLTAGE_U_RES; + else + *val2 = PAC1934_VOLTAGE_S_RES; + return IIO_VAL_FRACTIONAL_LOG2; + /* + * Currents - scale for mA - depends on the + * channel's shunt value + * (100mV * 1000000) / (2^16 * shunt(uohm)) + */ + case PAC1934_VSENSE_1_ADDR: + case PAC1934_VSENSE_2_ADDR: + case PAC1934_VSENSE_3_ADDR: + case PAC1934_VSENSE_4_ADDR: + case PAC1934_VSENSE_AVG_1_ADDR: + case PAC1934_VSENSE_AVG_2_ADDR: + case PAC1934_VSENSE_AVG_3_ADDR: + case PAC1934_VSENSE_AVG_4_ADDR: + *val = PAC1934_MAX_VSENSE_RSHIFTED_BY_16B; + if (chan->scan_type.sign == 'u') + *val2 = info->shunts[channel]; + else + *val2 = info->shunts[channel] >> 1; + return IIO_VAL_FRACTIONAL; + /* + * Power - uW - it will use the combined scale + * for current and voltage + * current(mA) * voltage(mV) = power (uW) + */ + case PAC1934_VPOWER_1_ADDR: + case PAC1934_VPOWER_2_ADDR: + case PAC1934_VPOWER_3_ADDR: + case PAC1934_VPOWER_4_ADDR: + *val = PAC1934_MAX_VPOWER_RSHIFTED_BY_28B; + if (chan->scan_type.sign == 'u') + *val2 = info->shunts[channel]; + else + *val2 = info->shunts[channel] >> 1; + return IIO_VAL_FRACTIONAL; + case PAC1934_VPOWER_ACC_1_ADDR: + case PAC1934_VPOWER_ACC_2_ADDR: + case PAC1934_VPOWER_ACC_3_ADDR: + case PAC1934_VPOWER_ACC_4_ADDR: + /* + * expresses the 32 bit scale value here compute + * the scale for energy (miliWatt-second or miliJoule) + */ + *val = PAC1934_SCALE_CONSTANT; + + if (chan->scan_type.sign == 'u') + *val2 = info->shunts[channel]; + else + *val2 = info->shunts[channel] >> 1; + return IIO_VAL_FRACTIONAL; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_SAMP_FREQ: + *val = info->sample_rate_value; + return IIO_VAL_INT; + case IIO_CHAN_INFO_ENABLE: + *val = info->enable_energy[channel]; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int pac1934_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct pac1934_chip_info *info = iio_priv(indio_dev); + struct i2c_client *client = info->client; + int ret = -EINVAL; + s32 old_samp_rate; + u8 ctrl_reg; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + ret = pac1934_get_samp_rate_idx(info, val); + if (ret < 0) + return ret; + + /* write the new sampling value and trigger a snapshot(incl refresh) */ + scoped_guard(mutex, &info->lock) { + ctrl_reg = FIELD_PREP(PAC1934_CRTL_SAMPLE_RATE_MASK, ret); + ret = i2c_smbus_write_byte_data(client, PAC1934_CTRL_REG_ADDR, ctrl_reg); + if (ret) { + dev_err(&client->dev, + "%s - can't update sample rate\n", + __func__); + return ret; + } + } + + old_samp_rate = info->sample_rate_value; + info->sample_rate_value = val; + + /* + * now, force a snapshot with refresh - call retrieve + * data in order to update the refresh timer + * alter the timestamp in order to force trigger a + * register snapshot and a timestamp update + */ + info->tstamp -= msecs_to_jiffies(PAC1934_MIN_POLLING_TIME_MS); + ret = pac1934_retrieve_data(info, (1024 / old_samp_rate) * 1000); + if (ret < 0) { + dev_err(&client->dev, + "%s - cannot snapshot ctrl and measurement regs\n", + __func__); + return ret; + } + + return 0; + case IIO_CHAN_INFO_ENABLE: + scoped_guard(mutex, &info->lock) { + info->enable_energy[chan->channel - 1] = val ? true : false; + if (!val) + info->chip_reg_data.energy_sec_acc[chan->channel - 1] = 0; + } + + return 0; + default: + return -EINVAL; + } +} + +static int pac1934_read_label(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, char *label) +{ + struct pac1934_chip_info *info = iio_priv(indio_dev); + + switch (chan->address) { + case PAC1934_VBUS_1_ADDR: + case PAC1934_VBUS_2_ADDR: + case PAC1934_VBUS_3_ADDR: + case PAC1934_VBUS_4_ADDR: + return sysfs_emit(label, "%s_VBUS_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VBUS_AVG_1_ADDR: + case PAC1934_VBUS_AVG_2_ADDR: + case PAC1934_VBUS_AVG_3_ADDR: + case PAC1934_VBUS_AVG_4_ADDR: + return sysfs_emit(label, "%s_VBUS_AVG_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VSENSE_1_ADDR: + case PAC1934_VSENSE_2_ADDR: + case PAC1934_VSENSE_3_ADDR: + case PAC1934_VSENSE_4_ADDR: + return sysfs_emit(label, "%s_IBUS_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VSENSE_AVG_1_ADDR: + case PAC1934_VSENSE_AVG_2_ADDR: + case PAC1934_VSENSE_AVG_3_ADDR: + case PAC1934_VSENSE_AVG_4_ADDR: + return sysfs_emit(label, "%s_IBUS_AVG_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VPOWER_1_ADDR: + case PAC1934_VPOWER_2_ADDR: + case PAC1934_VPOWER_3_ADDR: + case PAC1934_VPOWER_4_ADDR: + return sysfs_emit(label, "%s_POWER_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + case PAC1934_VPOWER_ACC_1_ADDR: + case PAC1934_VPOWER_ACC_2_ADDR: + case PAC1934_VPOWER_ACC_3_ADDR: + case PAC1934_VPOWER_ACC_4_ADDR: + return sysfs_emit(label, "%s_ENERGY_%d\n", + info->labels[chan->scan_index], + chan->scan_index + 1); + } + + return 0; +} + +static void pac1934_work_periodic_rfsh(struct work_struct *work) +{ + struct pac1934_chip_info *info = TO_PAC1934_CHIP_INFO((struct delayed_work *)work); + struct device *dev = &info->client->dev; + + dev_dbg(dev, "%s - Periodic refresh\n", __func__); + + /* do a REFRESH, then read */ + pac1934_reg_snapshot(info, true, PAC1934_REFRESH_REG_ADDR, + PAC1934_MIN_UPDATE_WAIT_TIME_US); + + schedule_delayed_work(&info->work_chip_rfsh, + msecs_to_jiffies(PAC1934_MAX_RFSH_LIMIT_MS)); +} + +static int pac1934_read_revision(struct pac1934_chip_info *info, u8 *buf) +{ + int ret; + struct i2c_client *client = info->client; + + ret = i2c_smbus_read_i2c_block_data(client, PAC1934_PID_REG_ADDR, + PAC1934_ID_REG_LEN, + buf); + if (ret < 0) { + dev_err(&client->dev, "cannot read revision\n"); + return ret; + } + + return 0; +} + +static int pac1934_chip_identify(struct pac1934_chip_info *info) +{ + u8 rev_info[PAC1934_ID_REG_LEN]; + struct device *dev = &info->client->dev; + int ret = 0; + + ret = pac1934_read_revision(info, (u8 *)rev_info); + if (ret) + return ret; + + info->chip_variant = rev_info[PAC1934_PID_IDX]; + info->chip_revision = rev_info[PAC1934_RID_IDX]; + + dev_dbg(dev, "Chip variant: 0x%02X\n", info->chip_variant); + dev_dbg(dev, "Chip revision: 0x%02X\n", info->chip_revision); + + switch (info->chip_variant) { + case PAC1934_PID: + return PAC1934; + case PAC1933_PID: + return PAC1933; + case PAC1932_PID: + return PAC1932; + case PAC1931_PID: + return PAC1931; + default: + return -EINVAL; + } +} + +/* + * documentation related to the ACPI device definition + * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ApplicationNotes/ApplicationNotes/PAC1934-Integration-Notes-for-Microsoft-Windows-10-and-Windows-11-Driver-Support-DS00002534.pdf + */ +static bool pac1934_acpi_parse_channel_config(struct i2c_client *client, + struct pac1934_chip_info *info) +{ + acpi_handle handle; + union acpi_object *rez; + struct device *dev = &client->dev; + unsigned short bi_dir_mask; + int idx, i; + guid_t guid; + + handle = ACPI_HANDLE(dev); + + guid_parse(PAC1934_DSM_UUID, &guid); + + rez = acpi_evaluate_dsm(handle, &guid, 0, PAC1934_ACPI_GET_NAMES_AND_MOHMS_VALS, NULL); + if (!rez) + return false; + + for (i = 0; i < rez->package.count; i += 2) { + idx = i / 2; + info->labels[idx] = + devm_kmemdup(dev, rez->package.elements[i].string.pointer, + (size_t)rez->package.elements[i].string.length + 1, + GFP_KERNEL); + info->labels[idx][rez->package.elements[i].string.length] = '\0'; + info->shunts[idx] = rez->package.elements[i + 1].integer.value * 1000; + info->active_channels[idx] = (info->shunts[idx] != 0); + } + + ACPI_FREE(rez); + + rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_UOHMS_VALS, NULL); + if (!rez) { + /* + * initializing with default values + * we assume all channels are unidirectional(the mask is zero) + * and assign the default sampling rate + */ + info->sample_rate_value = PAC1934_DEFAULT_CHIP_SAMP_SPEED_HZ; + return true; + } + + for (i = 0; i < rez->package.count; i++) { + idx = i; + info->shunts[idx] = rez->package.elements[i].integer.value; + info->active_channels[idx] = (info->shunts[idx] != 0); + } + + ACPI_FREE(rez); + + rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_BIPOLAR_SETTINGS, NULL); + if (!rez) + return false; + + bi_dir_mask = rez->package.elements[0].integer.value; + info->bi_dir[0] = ((bi_dir_mask & (1 << 3)) | (bi_dir_mask & (1 << 7))) != 0; + info->bi_dir[1] = ((bi_dir_mask & (1 << 2)) | (bi_dir_mask & (1 << 6))) != 0; + info->bi_dir[2] = ((bi_dir_mask & (1 << 1)) | (bi_dir_mask & (1 << 5))) != 0; + info->bi_dir[3] = ((bi_dir_mask & (1 << 0)) | (bi_dir_mask & (1 << 4))) != 0; + + ACPI_FREE(rez); + + rez = acpi_evaluate_dsm(handle, &guid, 1, PAC1934_ACPI_GET_SAMP, NULL); + if (!rez) + return false; + + info->sample_rate_value = rez->package.elements[0].integer.value; + + ACPI_FREE(rez); + + return true; +} + +static bool pac1934_of_parse_channel_config(struct i2c_client *client, + struct pac1934_chip_info *info) +{ + struct fwnode_handle *node, *fwnode; + struct device *dev = &client->dev; + unsigned int current_channel; + int idx, ret; + + info->sample_rate_value = 1024; + current_channel = 1; + + fwnode = dev_fwnode(dev); + fwnode_for_each_available_child_node(fwnode, node) { + ret = fwnode_property_read_u32(node, "reg", &idx); + if (ret) { + dev_err_probe(dev, ret, + "reading invalid channel index\n"); + goto err_fwnode; + } + /* adjust idx to match channel index (1 to 4) from the datasheet */ + idx--; + + if (current_channel >= (info->phys_channels + 1) || + idx >= info->phys_channels || idx < 0) { + dev_err_probe(dev, -EINVAL, + "%s: invalid channel_index %d value\n", + fwnode_get_name(node), idx); + goto err_fwnode; + } + + /* enable channel */ + info->active_channels[idx] = true; + + ret = fwnode_property_read_u32(node, "shunt-resistor-micro-ohms", + &info->shunts[idx]); + if (ret) { + dev_err_probe(dev, ret, + "%s: invalid shunt-resistor value: %d\n", + fwnode_get_name(node), info->shunts[idx]); + goto err_fwnode; + } + + if (fwnode_property_present(node, "label")) { + ret = fwnode_property_read_string(node, "label", + (const char **)&info->labels[idx]); + if (ret) { + dev_err_probe(dev, ret, + "%s: invalid rail-name value\n", + fwnode_get_name(node)); + goto err_fwnode; + } + } + + info->bi_dir[idx] = fwnode_property_read_bool(node, "bipolar"); + + current_channel++; + } + + return true; + +err_fwnode: + fwnode_handle_put(node); + + return false; +} + +static void pac1934_cancel_delayed_work(void *dwork) +{ + cancel_delayed_work_sync(dwork); +} + +static int pac1934_chip_configure(struct pac1934_chip_info *info) +{ + int cnt, ret; + struct i2c_client *client = info->client; + u8 regs[PAC1934_CTRL_STATUS_INFO_LEN], idx, ctrl_reg; + u32 wait_time; + + info->chip_reg_data.num_enabled_channels = 0; + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if (info->active_channels[cnt]) + info->chip_reg_data.num_enabled_channels++; + } + + /* + * read whatever information was gathered before the driver was loaded + * establish which channels are enabled/disabled and then establish the + * information retrieval mode (using SKIP or no). + * Read the chip ID values + */ + ret = i2c_smbus_read_i2c_block_data(client, PAC1934_CTRL_STAT_REGS_ADDR, + ARRAY_SIZE(regs), + (u8 *)regs); + if (ret < 0) { + dev_err_probe(&client->dev, ret, + "%s - cannot read regs from 0x%02X\n", + __func__, PAC1934_CTRL_STAT_REGS_ADDR); + return ret; + } + + /* write the CHANNEL_DIS and the NEG_PWR registers */ + regs[PAC1934_CHANNEL_DIS_REG_OFF] = + FIELD_PREP(PAC1934_CHAN_DIS_CH1_OFF_MASK, info->active_channels[0] ? 0 : 1) | + FIELD_PREP(PAC1934_CHAN_DIS_CH2_OFF_MASK, info->active_channels[1] ? 0 : 1) | + FIELD_PREP(PAC1934_CHAN_DIS_CH3_OFF_MASK, info->active_channels[2] ? 0 : 1) | + FIELD_PREP(PAC1934_CHAN_DIS_CH4_OFF_MASK, info->active_channels[3] ? 0 : 1) | + FIELD_PREP(PAC1934_SMBUS_TIMEOUT_MASK, 0) | + FIELD_PREP(PAC1934_SMBUS_BYTECOUNT_MASK, 0) | + FIELD_PREP(PAC1934_SMBUS_NO_SKIP_MASK, 0); + + regs[PAC1934_NEG_PWR_REG_OFF] = + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDI_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDI_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDI_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDI_MASK, info->bi_dir[3]) | + FIELD_PREP(PAC1934_NEG_PWR_CH1_BIDV_MASK, info->bi_dir[0]) | + FIELD_PREP(PAC1934_NEG_PWR_CH2_BIDV_MASK, info->bi_dir[1]) | + FIELD_PREP(PAC1934_NEG_PWR_CH3_BIDV_MASK, info->bi_dir[2]) | + FIELD_PREP(PAC1934_NEG_PWR_CH4_BIDV_MASK, info->bi_dir[3]); + + /* no SLOW triggered REFRESH, clear POR */ + regs[PAC1934_SLOW_REG_OFF] = 0; + + ret = i2c_smbus_write_block_data(client, PAC1934_CTRL_STAT_REGS_ADDR, + ARRAY_SIZE(regs), (u8 *)regs); + if (ret) + return ret; + + /* Default sampling rate */ + ctrl_reg = FIELD_PREP(PAC1934_CRTL_SAMPLE_RATE_MASK, PAC1934_SAMP_1024SPS); + + ret = i2c_smbus_write_byte_data(client, PAC1934_CTRL_REG_ADDR, ctrl_reg); + if (ret) + return ret; + + /* + * send a REFRESH to the chip, so the new settings take place + * as well as resetting the accumulators + */ + ret = i2c_smbus_write_byte(client, PAC1934_REFRESH_REG_ADDR); + if (ret) { + dev_err(&client->dev, + "%s - cannot send 0x%02X\n", + __func__, PAC1934_REFRESH_REG_ADDR); + return ret; + } + + /* + * get the current(in the chip) sampling speed and compute the + * required timeout based on its value + * the timeout is 1/sampling_speed + */ + idx = regs[PAC1934_CTRL_ACT_REG_OFF] >> PAC1934_SAMPLE_RATE_SHIFT; + wait_time = (1024 / samp_rate_map_tbl[idx]) * 1000; + + /* + * wait the maximum amount of time to be on the safe side + * the maximum wait time is for 8sps + */ + usleep_range(wait_time, wait_time + 100); + + INIT_DELAYED_WORK(&info->work_chip_rfsh, pac1934_work_periodic_rfsh); + /* Setup the latest moment for reading the regs before saturation */ + schedule_delayed_work(&info->work_chip_rfsh, + msecs_to_jiffies(PAC1934_MAX_RFSH_LIMIT_MS)); + + return devm_add_action_or_reset(&client->dev, pac1934_cancel_delayed_work, + &info->work_chip_rfsh); +} + +static int pac1934_prep_iio_channels(struct pac1934_chip_info *info, struct iio_dev *indio_dev) +{ + struct iio_chan_spec *ch_sp; + int channel_size, attribute_count, cnt; + void *dyn_ch_struct, *tmp_data; + struct device *dev = &info->client->dev; + + /* find out dynamically how many IIO channels we need */ + attribute_count = 0; + channel_size = 0; + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if (!info->active_channels[cnt]) + continue; + + /* add the size of the properties of one chip physical channel */ + channel_size += sizeof(pac1934_single_channel); + /* count how many enabled channels we have */ + attribute_count += ARRAY_SIZE(pac1934_single_channel); + dev_dbg(dev, ":%s: Channel %d active\n", __func__, cnt + 1); + } + + dyn_ch_struct = devm_kzalloc(dev, channel_size, GFP_KERNEL); + if (!dyn_ch_struct) + return -EINVAL; + + tmp_data = dyn_ch_struct; + + /* populate the dynamic channels and make all the adjustments */ + for (cnt = 0; cnt < info->phys_channels; cnt++) { + if (!info->active_channels[cnt]) + continue; + + memcpy(tmp_data, pac1934_single_channel, sizeof(pac1934_single_channel)); + ch_sp = (struct iio_chan_spec *)tmp_data; + ch_sp[PAC1934_CH_ENERGY].channel = cnt + 1; + ch_sp[PAC1934_CH_ENERGY].scan_index = cnt; + ch_sp[PAC1934_CH_ENERGY].address = cnt + PAC1934_VPOWER_ACC_1_ADDR; + ch_sp[PAC1934_CH_POWER].channel = cnt + 1; + ch_sp[PAC1934_CH_POWER].scan_index = cnt; + ch_sp[PAC1934_CH_POWER].address = cnt + PAC1934_VPOWER_1_ADDR; + ch_sp[PAC1934_CH_VOLTAGE].channel = cnt + 1; + ch_sp[PAC1934_CH_VOLTAGE].scan_index = cnt; + ch_sp[PAC1934_CH_VOLTAGE].address = cnt + PAC1934_VBUS_1_ADDR; + ch_sp[PAC1934_CH_CURRENT].channel = cnt + 1; + ch_sp[PAC1934_CH_CURRENT].scan_index = cnt; + ch_sp[PAC1934_CH_CURRENT].address = cnt + PAC1934_VSENSE_1_ADDR; + + /* + * In order to be able to use labels for PAC1934_CH_VOLTAGE, and + * PAC1934_CH_VOLTAGE_AVERAGE,respectively PAC1934_CH_CURRENT + * and PAC1934_CH_CURRENT_AVERAGE we need to use different + * channel numbers. We will add +5 (+1 to maximum PAC channels). + */ + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].channel = cnt + 5; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].scan_index = cnt; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].address = cnt + PAC1934_VBUS_AVG_1_ADDR; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].channel = cnt + 5; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].scan_index = cnt; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].address = cnt + PAC1934_VSENSE_AVG_1_ADDR; + + /* + * now modify the parameters in all channels if the + * whole chip rail(channel) is bi-directional + */ + if (info->bi_dir[cnt]) { + ch_sp[PAC1934_CH_ENERGY].scan_type.sign = 's'; + ch_sp[PAC1934_CH_ENERGY].scan_type.realbits = 47; + ch_sp[PAC1934_CH_POWER].scan_type.sign = 's'; + ch_sp[PAC1934_CH_POWER].scan_type.realbits = 27; + ch_sp[PAC1934_CH_VOLTAGE].scan_type.sign = 's'; + ch_sp[PAC1934_CH_VOLTAGE].scan_type.realbits = 15; + ch_sp[PAC1934_CH_CURRENT].scan_type.sign = 's'; + ch_sp[PAC1934_CH_CURRENT].scan_type.realbits = 15; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].scan_type.sign = 's'; + ch_sp[PAC1934_CH_VOLTAGE_AVERAGE].scan_type.realbits = 15; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].scan_type.sign = 's'; + ch_sp[PAC1934_CH_CURRENT_AVERAGE].scan_type.realbits = 15; + } + tmp_data += sizeof(pac1934_single_channel); + } + + /* + * send the updated dynamic channel structure information towards IIO + * prepare the required field for IIO class registration + */ + indio_dev->num_channels = attribute_count; + indio_dev->channels = (const struct iio_chan_spec *)dyn_ch_struct; + + return 0; +} + +static IIO_DEVICE_ATTR(in_shunt_resistor1, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 0); +static IIO_DEVICE_ATTR(in_shunt_resistor2, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 1); +static IIO_DEVICE_ATTR(in_shunt_resistor3, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 2); +static IIO_DEVICE_ATTR(in_shunt_resistor4, 0644, + pac1934_shunt_value_show, pac1934_shunt_value_store, 3); + +static int pac1934_prep_custom_attributes(struct pac1934_chip_info *info, + struct iio_dev *indio_dev) +{ + int i, active_channels_count = 0; + struct attribute **pac1934_custom_attr; + struct attribute_group *pac1934_group; + struct device *dev = &info->client->dev; + + for (i = 0 ; i < info->phys_channels; i++) + if (info->active_channels[i]) + active_channels_count++; + + pac1934_group = devm_kzalloc(dev, sizeof(*pac1934_group), GFP_KERNEL); + if (!pac1934_group) + return -ENOMEM; + + pac1934_custom_attr = devm_kzalloc(dev, + (PAC1934_CUSTOM_ATTR_FOR_CHANNEL * + active_channels_count) + * sizeof(*pac1934_group) + 1, + GFP_KERNEL); + if (!pac1934_custom_attr) + return -ENOMEM; + + i = 0; + if (info->active_channels[0]) + pac1934_custom_attr[i++] = PAC1934_DEV_ATTR(in_shunt_resistor1); + + if (info->active_channels[1]) + pac1934_custom_attr[i++] = PAC1934_DEV_ATTR(in_shunt_resistor2); + + if (info->active_channels[2]) + pac1934_custom_attr[i++] = PAC1934_DEV_ATTR(in_shunt_resistor3); + + if (info->active_channels[3]) + pac1934_custom_attr[i] = PAC1934_DEV_ATTR(in_shunt_resistor4); + + pac1934_group->attrs = pac1934_custom_attr; + info->iio_info.attrs = pac1934_group; + + return 0; +} + +static void pac1934_mutex_destroy(void *data) +{ + struct mutex *lock = data; + + mutex_destroy(lock); +} + +static const struct iio_info pac1934_info = { + .read_raw = pac1934_read_raw, + .write_raw = pac1934_write_raw, + .read_avail = pac1934_read_avail, + .read_label = pac1934_read_label, +}; + +static int pac1934_probe(struct i2c_client *client) +{ + struct pac1934_chip_info *info; + const struct pac1934_features *chip; + struct iio_dev *indio_dev; + int cnt, ret; + bool match = false; + struct device *dev = &client->dev; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*info)); + if (!indio_dev) + return -ENOMEM; + + info = iio_priv(indio_dev); + + info->client = client; + + /* always start with energy accumulation enabled */ + for (cnt = 0; cnt < PAC1934_MAX_NUM_CHANNELS; cnt++) + info->enable_energy[cnt] = true; + + ret = pac1934_chip_identify(info); + if (ret < 0) { + /* + * If failed to identify the hardware based on internal + * registers, try using fallback compatible in device tree + * to deal with some newer part number. + */ + chip = i2c_get_match_data(client); + if (!chip) + return -EINVAL; + + info->phys_channels = chip->phys_channels; + indio_dev->name = chip->name; + } else { + info->phys_channels = pac1934_chip_config[ret].phys_channels; + indio_dev->name = pac1934_chip_config[ret].name; + } + + if (acpi_match_device(dev->driver->acpi_match_table, dev)) + match = pac1934_acpi_parse_channel_config(client, info); + else + /* + * This makes it possible to use also ACPI PRP0001 for + * registering the device using device tree properties. + */ + match = pac1934_of_parse_channel_config(client, info); + + if (!match) + return dev_err_probe(dev, -EINVAL, + "parameter parsing returned an error\n"); + + mutex_init(&info->lock); + ret = devm_add_action_or_reset(dev, pac1934_mutex_destroy, + &info->lock); + if (ret < 0) + return ret; + + /* + * do now any chip specific initialization (e.g. read/write + * some registers), enable/disable certain channels, change the sampling + * rate to the requested value + */ + ret = pac1934_chip_configure(info); + if (ret < 0) + return ret; + + /* prepare the channel information */ + ret = pac1934_prep_iio_channels(info, indio_dev); + if (ret < 0) + return ret; + + info->iio_info = pac1934_info; + indio_dev->info = &info->iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = pac1934_prep_custom_attributes(info, indio_dev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Can't configure custom attributes for PAC1934 device\n"); + + /* + * read whatever has been accumulated in the chip so far + * and reset the accumulators + */ + ret = pac1934_reg_snapshot(info, true, PAC1934_REFRESH_REG_ADDR, + PAC1934_MIN_UPDATE_WAIT_TIME_US); + if (ret < 0) + return ret; + + ret = devm_iio_device_register(dev, indio_dev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Can't register IIO device\n"); + + return 0; +} + +static const struct i2c_device_id pac1934_id[] = { + { .name = "pac1931", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1931] }, + { .name = "pac1932", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1932] }, + { .name = "pac1933", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1933] }, + { .name = "pac1934", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1934] }, + {} +}; +MODULE_DEVICE_TABLE(i2c, pac1934_id); + +static const struct of_device_id pac1934_of_match[] = { + { + .compatible = "microchip,pac1931", + .data = &pac1934_chip_config[PAC1931] + }, + { + .compatible = "microchip,pac1932", + .data = &pac1934_chip_config[PAC1932] + }, + { + .compatible = "microchip,pac1933", + .data = &pac1934_chip_config[PAC1933] + }, + { + .compatible = "microchip,pac1934", + .data = &pac1934_chip_config[PAC1934] + }, + {} +}; +MODULE_DEVICE_TABLE(of, pac1934_of_match); + +/* + * using MCHP1930 to be compatible with BIOS ACPI. See example: + * https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ApplicationNotes/ApplicationNotes/PAC1934-Integration-Notes-for-Microsoft-Windows-10-and-Windows-11-Driver-Support-DS00002534.pdf + */ +static const struct acpi_device_id pac1934_acpi_match[] = { + { "MCHP1930", .driver_data = (kernel_ulong_t)&pac1934_chip_config[PAC1934] }, + {} +}; +MODULE_DEVICE_TABLE(acpi, pac1934_acpi_match); + +static struct i2c_driver pac1934_driver = { + .driver = { + .name = "pac1934", + .of_match_table = pac1934_of_match, + .acpi_match_table = pac1934_acpi_match + }, + .probe = pac1934_probe, + .id_table = pac1934_id, +}; + +module_i2c_driver(pac1934_driver); + +MODULE_AUTHOR("Bogdan Bolocan "); +MODULE_AUTHOR("Victor Tudose"); +MODULE_AUTHOR("Marius Cristea "); +MODULE_DESCRIPTION("IIO driver for PAC1934 Multi-Channel DC Power/Energy Monitor"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From b0a4546df24a4f8c59b2d05ae141bd70ceccc386 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 23 Feb 2024 13:45:21 +0100 Subject: iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2 The SARADCv2 on RK3588 (the only SoC currently supported that has an SARADCv2) selects the channel through the channel_sel bitfield which is the 4 lowest bits, therefore the mask should be GENMASK(3, 0) and not GENMASK(15, 0). Fixes: 757953f8ec69 ("iio: adc: rockchip_saradc: Add support for RK3588") Signed-off-by: Quentin Schulz Reviewed-by: Heiko Stuebner Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-1-84b06a0f623a@theobroma-systems.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rockchip_saradc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c index dd94667a623b..2da8d6f3241a 100644 --- a/drivers/iio/adc/rockchip_saradc.c +++ b/drivers/iio/adc/rockchip_saradc.c @@ -52,7 +52,7 @@ #define SARADC2_START BIT(4) #define SARADC2_SINGLE_MODE BIT(5) -#define SARADC2_CONV_CHANNELS GENMASK(15, 0) +#define SARADC2_CONV_CHANNELS GENMASK(3, 0) struct rockchip_saradc; -- cgit v1.2.3 From 5b4e4b72034f85f7a0cdd147d3d729c5a22c8764 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 23 Feb 2024 13:45:22 +0100 Subject: iio: adc: rockchip_saradc: use mask for write_enable bitfield Some of the registers on the SARADCv2 have bits write protected except if another bit is set. This is usually done by having the lowest 16 bits store the data to write and the highest 16 bits specify which of the 16 lowest bits should have their value written to the hardware block. The write_enable mask for the channel selection was incorrect because it was just the value shifted by 16 bits, which means it would only ever write bits and never clear them. So e.g. if someone starts a conversion on channel 5, the lowest 4 bits would be 0x5, then starts a conversion on channel 0, it would still be 5. Instead of shifting the value by 16 as the mask, let's use the OR'ing of the appropriate masks shifted by 16. Note that this is not an issue currently because the only SARADCv2 currently supported has a reset defined in its Device Tree, that reset resets the SARADC controller before starting a conversion on a channel. However, this reset is handled as optional by the probe function and thus proper masking should be used in the event an SARADCv2 without a reset ever makes it upstream. Fixes: 757953f8ec69 ("iio: adc: rockchip_saradc: Add support for RK3588") Signed-off-by: Quentin Schulz Reviewed-by: Heiko Stuebner Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-2-84b06a0f623a@theobroma-systems.com Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rockchip_saradc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c index 2da8d6f3241a..1c0042fbbb54 100644 --- a/drivers/iio/adc/rockchip_saradc.c +++ b/drivers/iio/adc/rockchip_saradc.c @@ -102,12 +102,12 @@ static void rockchip_saradc_start_v2(struct rockchip_saradc *info, int chn) writel_relaxed(0xc, info->regs + SARADC_T_DAS_SOC); writel_relaxed(0x20, info->regs + SARADC_T_PD_SOC); val = FIELD_PREP(SARADC2_EN_END_INT, 1); - val |= val << 16; + val |= SARADC2_EN_END_INT << 16; writel_relaxed(val, info->regs + SARADC2_END_INT_EN); val = FIELD_PREP(SARADC2_START, 1) | FIELD_PREP(SARADC2_SINGLE_MODE, 1) | FIELD_PREP(SARADC2_CONV_CHANNELS, chn); - val |= val << 16; + val |= (SARADC2_START | SARADC2_SINGLE_MODE | SARADC2_CONV_CHANNELS) << 16; writel(val, info->regs + SARADC2_CONV_CON); } -- cgit v1.2.3 From 9443c19ca6014e4ce6822c60b5bb9826903dff49 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Fri, 23 Feb 2024 13:45:23 +0100 Subject: iio: adc: rockchip_saradc: replace custom logic with devm_reset_control_get_optional_exclusive devm_reset_control_get_optional_exclusive does what this driver is trying to do in its probe function, therefore let's switch over to that subsystem function. Signed-off-by: Quentin Schulz Reviewed-by: Heiko Stuebner Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-3-84b06a0f623a@theobroma-systems.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rockchip_saradc.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c index 1c0042fbbb54..bbe954a738c7 100644 --- a/drivers/iio/adc/rockchip_saradc.c +++ b/drivers/iio/adc/rockchip_saradc.c @@ -450,16 +450,11 @@ static int rockchip_saradc_probe(struct platform_device *pdev) * The reset should be an optional property, as it should work * with old devicetrees as well */ - info->reset = devm_reset_control_get_exclusive(&pdev->dev, - "saradc-apb"); + info->reset = devm_reset_control_get_optional_exclusive(&pdev->dev, + "saradc-apb"); if (IS_ERR(info->reset)) { ret = PTR_ERR(info->reset); - if (ret != -ENOENT) - return dev_err_probe(&pdev->dev, ret, - "failed to get saradc-apb\n"); - - dev_dbg(&pdev->dev, "no reset control found\n"); - info->reset = NULL; + return dev_err_probe(&pdev->dev, ret, "failed to get saradc-apb\n"); } init_completion(&info->completion); -- cgit v1.2.3 From 1d8f4b04621f0f33a3d51699ffa32ddf54fe74ed Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Thu, 22 Feb 2024 02:13:37 +0100 Subject: iio: magnetometer: add a driver for Voltafield AF8133J magnetometer AF8133J is a simple I2C-connected magnetometer, without interrupts. Add a simple IIO driver for it. Signed-off-by: Icenowy Zheng Signed-off-by: Dalton Durst Signed-off-by: Shoji Keita Co-developed-by: Ondrej Jirman Signed-off-by: Ondrej Jirman Reviewed-by: Andrey Skvortsov Tested-by: Andrey Skvortsov Link: https://lore.kernel.org/r/20240222011341.3232645-4-megi@xff.cz Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/Kconfig | 12 + drivers/iio/magnetometer/Makefile | 1 + drivers/iio/magnetometer/af8133j.c | 528 +++++++++++++++++++++++++++++++++++++ 3 files changed, 541 insertions(+) create mode 100644 drivers/iio/magnetometer/af8133j.c (limited to 'drivers') diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 38532d840f2a..cd2917d71904 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -6,6 +6,18 @@ menu "Magnetometer sensors" +config AF8133J + tristate "Voltafield AF8133J 3-Axis Magnetometer" + depends on I2C + depends on OF + select REGMAP_I2C + help + Say yes here to build support for Voltafield AF8133J I2C-based + 3-axis magnetometer chip. + + To compile this driver as a module, choose M here: the module + will be called af8133j. + config AK8974 tristate "Asahi Kasei AK8974 3-Axis Magnetometer" depends on I2C diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile index b1c784ea71c8..ec5c46fbf999 100644 --- a/drivers/iio/magnetometer/Makefile +++ b/drivers/iio/magnetometer/Makefile @@ -4,6 +4,7 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_AF8133J) += af8133j.o obj-$(CONFIG_AK8974) += ak8974.o obj-$(CONFIG_AK8975) += ak8975.o obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o diff --git a/drivers/iio/magnetometer/af8133j.c b/drivers/iio/magnetometer/af8133j.c new file mode 100644 index 000000000000..742bbdf25f08 --- /dev/null +++ b/drivers/iio/magnetometer/af8133j.c @@ -0,0 +1,528 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * af8133j.c - Voltafield AF8133J magnetometer driver + * + * Copyright 2021 Icenowy Zheng + * Copyright 2024 Ondřej Jirman + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define AF8133J_REG_OUT 0x03 +#define AF8133J_REG_PCODE 0x00 +#define AF8133J_REG_PCODE_VAL 0x5e +#define AF8133J_REG_STATUS 0x02 +#define AF8133J_REG_STATUS_ACQ BIT(0) +#define AF8133J_REG_STATE 0x0a +#define AF8133J_REG_STATE_STBY 0x00 +#define AF8133J_REG_STATE_WORK 0x01 +#define AF8133J_REG_RANGE 0x0b +#define AF8133J_REG_RANGE_22G 0x12 +#define AF8133J_REG_RANGE_12G 0x34 +#define AF8133J_REG_SWR 0x11 +#define AF8133J_REG_SWR_PERFORM 0x81 + +static const char * const af8133j_supply_names[] = { + "avdd", + "dvdd", +}; + +struct af8133j_data { + struct i2c_client *client; + struct regmap *regmap; + /* + * Protect device internal state between starting a measurement + * and reading the result. + */ + struct mutex mutex; + struct iio_mount_matrix orientation; + + struct gpio_desc *reset_gpiod; + struct regulator_bulk_data supplies[ARRAY_SIZE(af8133j_supply_names)]; + + u8 range; +}; + +enum af8133j_axis { + AXIS_X = 0, + AXIS_Y, + AXIS_Z, +}; + +static struct iio_mount_matrix * +af8133j_get_mount_matrix(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct af8133j_data *data = iio_priv(indio_dev); + + return &data->orientation; +} + +static const struct iio_chan_spec_ext_info af8133j_ext_info[] = { + IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, af8133j_get_mount_matrix), + { } +}; + +#define AF8133J_CHANNEL(_si, _axis) { \ + .type = IIO_MAGN, \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## _axis, \ + .address = AXIS_ ## _axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = af8133j_ext_info, \ + .scan_index = _si, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + +static const struct iio_chan_spec af8133j_channels[] = { + AF8133J_CHANNEL(0, X), + AF8133J_CHANNEL(1, Y), + AF8133J_CHANNEL(2, Z), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static int af8133j_product_check(struct af8133j_data *data) +{ + struct device *dev = &data->client->dev; + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, AF8133J_REG_PCODE, &val); + if (ret) { + dev_err(dev, "Error reading product code (%d)\n", ret); + return ret; + } + + if (val != AF8133J_REG_PCODE_VAL) { + dev_warn(dev, "Invalid product code (0x%02x)\n", val); + return 0; /* Allow unknown ID so fallback compatibles work */ + } + + return 0; +} + +static int af8133j_reset(struct af8133j_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + + if (data->reset_gpiod) { + /* If we have GPIO reset line, use it */ + gpiod_set_value_cansleep(data->reset_gpiod, 1); + udelay(10); + gpiod_set_value_cansleep(data->reset_gpiod, 0); + } else { + /* Otherwise use software reset */ + ret = regmap_write(data->regmap, AF8133J_REG_SWR, + AF8133J_REG_SWR_PERFORM); + if (ret) { + dev_err(dev, "Failed to reset the chip\n"); + return ret; + } + } + + /* Wait for reset to finish */ + usleep_range(1000, 1100); + + /* Restore range setting */ + if (data->range == AF8133J_REG_RANGE_22G) { + ret = regmap_write(data->regmap, AF8133J_REG_RANGE, data->range); + if (ret) + return ret; + } + + return 0; +} + +static void af8133j_power_down(struct af8133j_data *data) +{ + gpiod_set_value_cansleep(data->reset_gpiod, 1); + regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies); +} + +static int af8133j_power_up(struct af8133j_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies); + if (ret) { + dev_err(dev, "Could not enable regulators\n"); + return ret; + } + + gpiod_set_value_cansleep(data->reset_gpiod, 0); + + /* Wait for power on reset */ + usleep_range(15000, 16000); + + ret = af8133j_reset(data); + if (ret) { + af8133j_power_down(data); + return ret; + } + + return 0; +} + +static int af8133j_take_measurement(struct af8133j_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_write(data->regmap, + AF8133J_REG_STATE, AF8133J_REG_STATE_WORK); + if (ret) + return ret; + + /* The datasheet says "Mesaure Time <1.5ms" */ + ret = regmap_read_poll_timeout(data->regmap, AF8133J_REG_STATUS, val, + val & AF8133J_REG_STATUS_ACQ, + 500, 1500); + if (ret) + return ret; + + ret = regmap_write(data->regmap, + AF8133J_REG_STATE, AF8133J_REG_STATE_STBY); + if (ret) + return ret; + + return 0; +} + +static int af8133j_read_measurement(struct af8133j_data *data, __le16 buf[3]) +{ + struct device *dev = &data->client->dev; + int ret; + + ret = pm_runtime_resume_and_get(dev); + if (ret) { + /* + * Ignore EACCES because that happens when RPM is disabled + * during system sleep, while userspace leave eg. hrtimer + * trigger attached and IIO core keeps trying to do measurements. + */ + if (ret != -EACCES) + dev_err(dev, "Failed to power on (%d)\n", ret); + return ret; + } + + scoped_guard(mutex, &data->mutex) { + ret = af8133j_take_measurement(data); + if (ret) + goto out_rpm_put; + + ret = regmap_bulk_read(data->regmap, AF8133J_REG_OUT, + buf, sizeof(__le16) * 3); + } + +out_rpm_put: + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static const int af8133j_scales[][2] = { + [0] = { 0, 366210 }, /* 12 gauss */ + [1] = { 0, 671386 }, /* 22 gauss */ +}; + +static int af8133j_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct af8133j_data *data = iio_priv(indio_dev); + __le16 buf[3]; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = af8133j_read_measurement(data, buf); + if (ret) + return ret; + + *val = sign_extend32(le16_to_cpu(buf[chan->address]), + chan->scan_type.realbits - 1); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + + if (data->range == AF8133J_REG_RANGE_12G) + *val2 = af8133j_scales[0][1]; + else + *val2 = af8133j_scales[1][1]; + + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } +} + +static int af8133j_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_SCALE: + *vals = (const int *)af8133j_scales; + *length = ARRAY_SIZE(af8133j_scales) * 2; + *type = IIO_VAL_INT_PLUS_NANO; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int af8133j_set_scale(struct af8133j_data *data, + unsigned int val, unsigned int val2) +{ + struct device *dev = &data->client->dev; + u8 range; + int ret = 0; + + if (af8133j_scales[0][0] == val && af8133j_scales[0][1] == val2) + range = AF8133J_REG_RANGE_12G; + else if (af8133j_scales[1][0] == val && af8133j_scales[1][1] == val2) + range = AF8133J_REG_RANGE_22G; + else + return -EINVAL; + + pm_runtime_disable(dev); + + /* + * When suspended, just store the new range to data->range to be + * applied later during power up. + */ + if (!pm_runtime_status_suspended(dev)) + scoped_guard(mutex, &data->mutex) + ret = regmap_write(data->regmap, + AF8133J_REG_RANGE, range); + + pm_runtime_enable(dev); + + data->range = range; + return ret; +} + +static int af8133j_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct af8133j_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return af8133j_set_scale(data, val, val2); + default: + return -EINVAL; + } +} + +static int af8133j_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static const struct iio_info af8133j_info = { + .read_raw = af8133j_read_raw, + .read_avail = af8133j_read_avail, + .write_raw = af8133j_write_raw, + .write_raw_get_fmt = af8133j_write_raw_get_fmt, +}; + +static irqreturn_t af8133j_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct af8133j_data *data = iio_priv(indio_dev); + s64 timestamp = iio_get_time_ns(indio_dev); + struct { + __le16 values[3]; + s64 timestamp __aligned(8); + } sample; + int ret; + + memset(&sample, 0, sizeof(sample)); + + ret = af8133j_read_measurement(data, sample.values); + if (ret) + goto out_done; + + iio_push_to_buffers_with_timestamp(indio_dev, &sample, timestamp); + +out_done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct regmap_config af8133j_regmap_config = { + .name = "af8133j_regmap", + .reg_bits = 8, + .val_bits = 8, + .max_register = AF8133J_REG_SWR, + .cache_type = REGCACHE_NONE, +}; + +static void af8133j_power_down_action(void *ptr) +{ + struct af8133j_data *data = ptr; + + if (!pm_runtime_status_suspended(&data->client->dev)) + af8133j_power_down(data); +} + +static int af8133j_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct af8133j_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + int ret, i; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + regmap = devm_regmap_init_i2c(client, &af8133j_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "regmap initialization failed\n"); + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + data->regmap = regmap; + data->range = AF8133J_REG_RANGE_12G; + mutex_init(&data->mutex); + + data->reset_gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(data->reset_gpiod)) + return dev_err_probe(dev, PTR_ERR(data->reset_gpiod), + "Failed to get reset gpio\n"); + + for (i = 0; i < ARRAY_SIZE(af8133j_supply_names); i++) + data->supplies[i].supply = af8133j_supply_names[i]; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies), + data->supplies); + if (ret) + return ret; + + ret = iio_read_mount_matrix(dev, &data->orientation); + if (ret) + return dev_err_probe(dev, ret, "Failed to read mount matrix\n"); + + ret = af8133j_power_up(data); + if (ret) + return ret; + + pm_runtime_set_active(dev); + + ret = devm_add_action_or_reset(dev, af8133j_power_down_action, data); + if (ret) + return ret; + + ret = af8133j_product_check(data); + if (ret) + return ret; + + pm_runtime_get_noresume(dev); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_autosuspend_delay(dev, 500); + ret = devm_pm_runtime_enable(dev); + if (ret) + return ret; + + pm_runtime_put_autosuspend(dev); + + indio_dev->info = &af8133j_info; + indio_dev->name = "af8133j"; + indio_dev->channels = af8133j_channels; + indio_dev->num_channels = ARRAY_SIZE(af8133j_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + &af8133j_trigger_handler, NULL); + if (ret) + return dev_err_probe(&client->dev, ret, + "Failed to setup iio triggered buffer\n"); + + ret = devm_iio_device_register(dev, indio_dev); + if (ret) + return dev_err_probe(dev, ret, "Failed to register iio device"); + + return 0; +} + +static int af8133j_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct af8133j_data *data = iio_priv(indio_dev); + + af8133j_power_down(data); + + return 0; +} + +static int af8133j_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct af8133j_data *data = iio_priv(indio_dev); + + return af8133j_power_up(data); +} + +static const struct dev_pm_ops af8133j_pm_ops = { + SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) + RUNTIME_PM_OPS(af8133j_runtime_suspend, af8133j_runtime_resume, NULL) +}; + +static const struct of_device_id af8133j_of_match[] = { + { .compatible = "voltafield,af8133j", }, + { } +}; +MODULE_DEVICE_TABLE(of, af8133j_of_match); + +static const struct i2c_device_id af8133j_id[] = { + { "af8133j", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, af8133j_id); + +static struct i2c_driver af8133j_driver = { + .driver = { + .name = "af8133j", + .of_match_table = af8133j_of_match, + .pm = pm_ptr(&af8133j_pm_ops), + }, + .probe = af8133j_probe, + .id_table = af8133j_id, +}; + +module_i2c_driver(af8133j_driver); + +MODULE_AUTHOR("Icenowy Zheng "); +MODULE_AUTHOR("Ondřej Jirman "); +MODULE_DESCRIPTION("Voltafield AF8133J magnetic sensor driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From cc8a587a7cdc91332dac3e435d437e17af82137e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 25 Feb 2024 21:27:44 +0100 Subject: iio: adc: qcom-pm8xxx-xoadc: drop unused kerneldoc struct pm8xxx_chan_info member Drop description of non-existing 'struct pm8xxx_chan_info' member: qcom-pm8xxx-xoadc.c:386: warning: Excess struct member 'scale_fn_type' description in 'pm8xxx_chan_info' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240225202744.60500-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- drivers/iio/adc/qcom-pm8xxx-xoadc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c index 01c5586df56d..c9d2c66434e4 100644 --- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -372,7 +372,6 @@ static const struct xoadc_channel pm8921_xoadc_channels[] = { * @name: name of this channel * @hwchan: pointer to hardware channel information (muxing & scaling settings) * @calibration: whether to use absolute or ratiometric calibration - * @scale_fn_type: scaling function type * @decimation: 0,1,2,3 * @amux_ip_rsv: ratiometric scale value if using ratiometric * calibration: 0, 1, 2, 4, 5. -- cgit v1.2.3 From 051db7ee60f43816da48ec61ce5cbf82112dd62d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 25 Feb 2024 21:16:54 +0100 Subject: iio: proximity: isl29501: make use of of_device_id table Reference the of_device_id table in the driver structure, so it will be used for module autoloading and device matching. This fixes clang W=1 warning: isl29501.c:999:34: error: unused variable 'isl29501_i2c_matches' [-Werror,-Wunused-const-variable] Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240225201654.49450-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/isl29501.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/isl29501.c b/drivers/iio/proximity/isl29501.c index bcebacaf3dab..4982686fb4c3 100644 --- a/drivers/iio/proximity/isl29501.c +++ b/drivers/iio/proximity/isl29501.c @@ -995,17 +995,16 @@ static const struct i2c_device_id isl29501_id[] = { MODULE_DEVICE_TABLE(i2c, isl29501_id); -#if defined(CONFIG_OF) static const struct of_device_id isl29501_i2c_matches[] = { { .compatible = "renesas,isl29501" }, { } }; MODULE_DEVICE_TABLE(of, isl29501_i2c_matches); -#endif static struct i2c_driver isl29501_driver = { .driver = { .name = "isl29501", + .of_match_table = isl29501_i2c_matches, }, .id_table = isl29501_id, .probe = isl29501_probe, -- cgit v1.2.3 From 4a1574cea02c2cf06a506cff045187f948c92212 Mon Sep 17 00:00:00 2001 From: Danila Tikhonov Date: Thu, 22 Feb 2024 20:42:50 +0300 Subject: interconnect: qcom: Add SM7150 driver support Add a driver that handles the different NoCs found on SM7150, based on the downstream dtb. Signed-off-by: Danila Tikhonov Link: https://lore.kernel.org/r/20240222174250.80493-3-danila@jiaxyga.com Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/Kconfig | 9 + drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/sm7150.c | 1754 ++++++++++++++++++++++++++++++++++++ drivers/interconnect/qcom/sm7150.h | 140 +++ 4 files changed, 1905 insertions(+) create mode 100644 drivers/interconnect/qcom/sm7150.c create mode 100644 drivers/interconnect/qcom/sm7150.h (limited to 'drivers') diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig index 697f96c49f6f..465523c70d3e 100644 --- a/drivers/interconnect/qcom/Kconfig +++ b/drivers/interconnect/qcom/Kconfig @@ -209,6 +209,15 @@ config INTERCONNECT_QCOM_SM6350 This is a driver for the Qualcomm Network-on-Chip on sm6350-based platforms. +config INTERCONNECT_QCOM_SM7150 + tristate "Qualcomm SM7150 interconnect driver" + depends on INTERCONNECT_QCOM_RPMH_POSSIBLE + select INTERCONNECT_QCOM_RPMH + select INTERCONNECT_QCOM_BCM_VOTER + help + This is a driver for the Qualcomm Network-on-Chip on sm7150-based + platforms. + config INTERCONNECT_QCOM_SM8150 tristate "Qualcomm SM8150 interconnect driver" depends on INTERCONNECT_QCOM_RPMH_POSSIBLE diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile index 704846165022..51d5084bbb3b 100644 --- a/drivers/interconnect/qcom/Makefile +++ b/drivers/interconnect/qcom/Makefile @@ -26,6 +26,7 @@ qnoc-sdx65-objs := sdx65.o qnoc-sdx75-objs := sdx75.o qnoc-sm6115-objs := sm6115.o qnoc-sm6350-objs := sm6350.o +qnoc-sm7150-objs := sm7150.o qnoc-sm8150-objs := sm8150.o qnoc-sm8250-objs := sm8250.o qnoc-sm8350-objs := sm8350.o @@ -58,6 +59,7 @@ obj-$(CONFIG_INTERCONNECT_QCOM_SDX65) += qnoc-sdx65.o obj-$(CONFIG_INTERCONNECT_QCOM_SDX75) += qnoc-sdx75.o obj-$(CONFIG_INTERCONNECT_QCOM_SM6115) += qnoc-sm6115.o obj-$(CONFIG_INTERCONNECT_QCOM_SM6350) += qnoc-sm6350.o +obj-$(CONFIG_INTERCONNECT_QCOM_SM7150) += qnoc-sm7150.o obj-$(CONFIG_INTERCONNECT_QCOM_SM8150) += qnoc-sm8150.o obj-$(CONFIG_INTERCONNECT_QCOM_SM8250) += qnoc-sm8250.o obj-$(CONFIG_INTERCONNECT_QCOM_SM8350) += qnoc-sm8350.o diff --git a/drivers/interconnect/qcom/sm7150.c b/drivers/interconnect/qcom/sm7150.c new file mode 100644 index 000000000000..dc0d1343f510 --- /dev/null +++ b/drivers/interconnect/qcom/sm7150.c @@ -0,0 +1,1754 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Danila Tikhonov + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "bcm-voter.h" +#include "icc-rpmh.h" +#include "sm7150.h" + +static struct qcom_icc_node qhm_a1noc_cfg = { + .name = "qhm-a1noc-cfg", + .id = SM7150_MASTER_A1NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_SLAVE_SERVICE_A1NOC }, +}; + +static struct qcom_icc_node qhm_qup_center = { + .name = "qhm_qup_center", + .id = SM7150_MASTER_QUP_0, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_A1NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node qhm_tsif = { + .name = "qhm_tsif", + .id = SM7150_MASTER_TSIF, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_A1NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node xm_emmc = { + .name = "xm_emmc", + .id = SM7150_MASTER_EMMC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A1NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node xm_sdc2 = { + .name = "xm_sdc2", + .id = SM7150_MASTER_SDCC_2, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A1NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node xm_sdc4 = { + .name = "xm_sdc4", + .id = SM7150_MASTER_SDCC_4, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A1NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node xm_ufs_mem = { + .name = "xm_ufs_mem", + .id = SM7150_MASTER_UFS_MEM, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A1NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node qhm_a2noc_cfg = { + .name = "qhm_a2noc_cfg", + .id = SM7150_MASTER_A2NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_SLAVE_SERVICE_A2NOC }, +}; + +static struct qcom_icc_node qhm_qdss_bam = { + .name = "qhm_qdss_bam", + .id = SM7150_MASTER_QDSS_BAM, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node qhm_qup_north = { + .name = "qhm_qup_north", + .id = SM7150_MASTER_QUP_1, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node qnm_cnoc = { + .name = "qnm_cnoc", + .id = SM7150_MASTER_CNOC_A2NOC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node qxm_crypto = { + .name = "qxm_crypto", + .id = SM7150_MASTER_CRYPTO_CORE_0, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node qxm_ipa = { + .name = "qxm_ipa", + .id = SM7150_MASTER_IPA, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node xm_pcie3_0 = { + .name = "xm_pcie3_0", + .id = SM7150_MASTER_PCIE, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_SLAVE_ANOC_PCIE_GEM_NOC }, +}; + +static struct qcom_icc_node xm_qdss_etr = { + .name = "xm_qdss_etr", + .id = SM7150_MASTER_QDSS_ETR, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node xm_usb3_0 = { + .name = "xm_usb3_0", + .id = SM7150_MASTER_USB3, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_SLV }, +}; + +static struct qcom_icc_node qxm_camnoc_hf0_uncomp = { + .name = "qxm_camnoc_hf0_uncomp", + .id = SM7150_MASTER_CAMNOC_HF0_UNCOMP, + .channels = 2, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_CAMNOC_UNCOMP }, +}; + +static struct qcom_icc_node qxm_camnoc_rt_uncomp = { + .name = "qxm_camnoc_rt_uncomp", + .id = SM7150_MASTER_CAMNOC_RT_UNCOMP, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_CAMNOC_UNCOMP }, +}; + +static struct qcom_icc_node qxm_camnoc_sf_uncomp = { + .name = "qxm_camnoc_sf_uncomp", + .id = SM7150_MASTER_CAMNOC_SF_UNCOMP, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_CAMNOC_UNCOMP }, +}; + +static struct qcom_icc_node qxm_camnoc_nrt_uncomp = { + .name = "qxm_camnoc_nrt_uncomp", + .id = SM7150_MASTER_CAMNOC_NRT_UNCOMP, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_CAMNOC_UNCOMP }, +}; + +static struct qcom_icc_node qnm_npu = { + .name = "qnm_npu", + .id = SM7150_MASTER_NPU, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_CDSP_GEM_NOC }, +}; + +static struct qcom_icc_node qhm_spdm = { + .name = "qhm_spdm", + .id = SM7150_MASTER_SPDM, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_SLAVE_CNOC_A2NOC }, +}; + +static struct qcom_icc_node qnm_snoc = { + .name = "qnm_snoc", + .id = SM7150_SNOC_CNOC_MAS, + .channels = 1, + .buswidth = 8, + .num_links = 47, + .links = { SM7150_SLAVE_TLMM_SOUTH, + SM7150_SLAVE_CAMERA_CFG, + SM7150_SLAVE_SDCC_4, + SM7150_SLAVE_SDCC_2, + SM7150_SLAVE_CNOC_MNOC_CFG, + SM7150_SLAVE_UFS_MEM_CFG, + SM7150_SLAVE_QUP_0, + SM7150_SLAVE_GLM, + SM7150_SLAVE_PDM, + SM7150_SLAVE_CAMERA_NRT_THROTTLE_CFG, + SM7150_SLAVE_A2NOC_CFG, + SM7150_SLAVE_QDSS_CFG, + SM7150_SLAVE_CAMERA_RT_THROTTLE_CFG, + SM7150_SLAVE_DISPLAY_CFG, + SM7150_SLAVE_PCIE_CFG, + SM7150_SLAVE_DISPLAY_THROTTLE_CFG, + SM7150_SLAVE_TCSR, + SM7150_SLAVE_VENUS_CVP_THROTTLE_CFG, + SM7150_SLAVE_CNOC_DDRSS, + SM7150_SLAVE_AHB2PHY_NORTH, + SM7150_SLAVE_SNOC_CFG, + SM7150_SLAVE_GRAPHICS_3D_CFG, + SM7150_SLAVE_VENUS_CFG, + SM7150_SLAVE_TSIF, + SM7150_SLAVE_CDSP_CFG, + SM7150_SLAVE_CLK_CTL, + SM7150_SLAVE_AOP, + SM7150_SLAVE_QUP_1, + SM7150_SLAVE_AHB2PHY_SOUTH, + SM7150_SLAVE_SERVICE_CNOC, + SM7150_SLAVE_AHB2PHY_WEST, + SM7150_SLAVE_USB3, + SM7150_SLAVE_VENUS_THROTTLE_CFG, + SM7150_SLAVE_IPA_CFG, + SM7150_SLAVE_RBCPR_CX_CFG, + SM7150_SLAVE_TLMM_WEST, + SM7150_SLAVE_A1NOC_CFG, + SM7150_SLAVE_AOSS, + SM7150_SLAVE_PRNG, + SM7150_SLAVE_VSENSE_CTRL_CFG, + SM7150_SLAVE_EMMC_CFG, + SM7150_SLAVE_SPDM_WRAPPER, + SM7150_SLAVE_CRYPTO_0_CFG, + SM7150_SLAVE_PIMEM_CFG, + SM7150_SLAVE_TLMM_NORTH, + SM7150_SLAVE_RBCPR_MX_CFG, + SM7150_SLAVE_IMEM_CFG + }, +}; + +static struct qcom_icc_node xm_qdss_dap = { + .name = "xm_qdss_dap", + .id = SM7150_MASTER_QDSS_DAP, + .channels = 1, + .buswidth = 8, + .num_links = 48, + .links = { SM7150_SLAVE_TLMM_SOUTH, + SM7150_SLAVE_CAMERA_CFG, + SM7150_SLAVE_SDCC_4, + SM7150_SLAVE_SDCC_2, + SM7150_SLAVE_CNOC_MNOC_CFG, + SM7150_SLAVE_UFS_MEM_CFG, + SM7150_SLAVE_QUP_0, + SM7150_SLAVE_GLM, + SM7150_SLAVE_PDM, + SM7150_SLAVE_CAMERA_NRT_THROTTLE_CFG, + SM7150_SLAVE_A2NOC_CFG, + SM7150_SLAVE_QDSS_CFG, + SM7150_SLAVE_CAMERA_RT_THROTTLE_CFG, + SM7150_SLAVE_DISPLAY_CFG, + SM7150_SLAVE_PCIE_CFG, + SM7150_SLAVE_DISPLAY_THROTTLE_CFG, + SM7150_SLAVE_TCSR, + SM7150_SLAVE_VENUS_CVP_THROTTLE_CFG, + SM7150_SLAVE_CNOC_DDRSS, + SM7150_SLAVE_CNOC_A2NOC, + SM7150_SLAVE_AHB2PHY_NORTH, + SM7150_SLAVE_SNOC_CFG, + SM7150_SLAVE_GRAPHICS_3D_CFG, + SM7150_SLAVE_VENUS_CFG, + SM7150_SLAVE_TSIF, + SM7150_SLAVE_CDSP_CFG, + SM7150_SLAVE_CLK_CTL, + SM7150_SLAVE_AOP, + SM7150_SLAVE_QUP_1, + SM7150_SLAVE_AHB2PHY_SOUTH, + SM7150_SLAVE_SERVICE_CNOC, + SM7150_SLAVE_AHB2PHY_WEST, + SM7150_SLAVE_USB3, + SM7150_SLAVE_VENUS_THROTTLE_CFG, + SM7150_SLAVE_IPA_CFG, + SM7150_SLAVE_RBCPR_CX_CFG, + SM7150_SLAVE_TLMM_WEST, + SM7150_SLAVE_A1NOC_CFG, + SM7150_SLAVE_AOSS, + SM7150_SLAVE_PRNG, + SM7150_SLAVE_VSENSE_CTRL_CFG, + SM7150_SLAVE_EMMC_CFG, + SM7150_SLAVE_SPDM_WRAPPER, + SM7150_SLAVE_CRYPTO_0_CFG, + SM7150_SLAVE_PIMEM_CFG, + SM7150_SLAVE_TLMM_NORTH, + SM7150_SLAVE_RBCPR_MX_CFG, + SM7150_SLAVE_IMEM_CFG + }, +}; + +static struct qcom_icc_node qhm_cnoc_dc_noc = { + .name = "qhm_cnoc_dc_noc", + .id = SM7150_MASTER_CNOC_DC_NOC, + .channels = 1, + .buswidth = 4, + .num_links = 2, + .links = { SM7150_SLAVE_LLCC_CFG, + SM7150_SLAVE_GEM_NOC_CFG + }, +}; + +static struct qcom_icc_node acm_apps = { + .name = "acm_apps", + .id = SM7150_MASTER_AMPSS_M0, + .channels = 1, + .buswidth = 16, + .num_links = 2, + .links = { SM7150_SLAVE_LLCC, + SM7150_SLAVE_GEM_NOC_SNOC + }, +}; + +static struct qcom_icc_node acm_sys_tcu = { + .name = "acm_sys_tcu", + .id = SM7150_MASTER_SYS_TCU, + .channels = 1, + .buswidth = 8, + .num_links = 2, + .links = { SM7150_SLAVE_LLCC, + SM7150_SLAVE_GEM_NOC_SNOC + }, +}; + +static struct qcom_icc_node qhm_gemnoc_cfg = { + .name = "qhm_gemnoc_cfg", + .id = SM7150_MASTER_GEM_NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 2, + .links = { SM7150_SLAVE_SERVICE_GEM_NOC, + SM7150_SLAVE_MSS_PROC_MS_MPU_CFG + }, +}; + +static struct qcom_icc_node qnm_cmpnoc = { + .name = "qnm_cmpnoc", + .id = SM7150_MASTER_COMPUTE_NOC, + .channels = 1, + .buswidth = 32, + .num_links = 2, + .links = { SM7150_SLAVE_LLCC, + SM7150_SLAVE_GEM_NOC_SNOC + }, +}; + +static struct qcom_icc_node qnm_mnoc_hf = { + .name = "qnm_mnoc_hf", + .id = SM7150_MASTER_MNOC_HF_MEM_NOC, + .channels = 2, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_LLCC }, +}; + +static struct qcom_icc_node qnm_mnoc_sf = { + .name = "qnm_mnoc_sf", + .id = SM7150_MASTER_MNOC_SF_MEM_NOC, + .channels = 1, + .buswidth = 32, + .num_links = 2, + .links = { SM7150_SLAVE_LLCC, + SM7150_SLAVE_GEM_NOC_SNOC + }, +}; + +static struct qcom_icc_node qnm_pcie = { + .name = "qnm_pcie", + .id = SM7150_MASTER_GEM_NOC_PCIE_SNOC, + .channels = 1, + .buswidth = 8, + .num_links = 2, + .links = { SM7150_SLAVE_LLCC, + SM7150_SLAVE_GEM_NOC_SNOC + }, +}; + +static struct qcom_icc_node qnm_snoc_gc = { + .name = "qnm_snoc_gc", + .id = SM7150_MASTER_SNOC_GC_MEM_NOC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_SLAVE_LLCC }, +}; + +static struct qcom_icc_node qnm_snoc_sf = { + .name = "qnm_snoc_sf", + .id = SM7150_MASTER_SNOC_SF_MEM_NOC, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SM7150_SLAVE_LLCC }, +}; + +static struct qcom_icc_node qxm_gpu = { + .name = "qxm_gpu", + .id = SM7150_MASTER_GRAPHICS_3D, + .channels = 2, + .buswidth = 32, + .num_links = 2, + .links = { SM7150_SLAVE_LLCC, + SM7150_SLAVE_GEM_NOC_SNOC + }, +}; + +static struct qcom_icc_node llcc_mc = { + .name = "llcc_mc", + .id = SM7150_MASTER_LLCC, + .channels = 2, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_SLAVE_EBI_CH0 }, +}; + +static struct qcom_icc_node qhm_mnoc_cfg = { + .name = "qhm_mnoc_cfg", + .id = SM7150_MASTER_CNOC_MNOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_SLAVE_SERVICE_MNOC }, +}; + +static struct qcom_icc_node qxm_camnoc_hf = { + .name = "qxm_camnoc_hf", + .id = SM7150_MASTER_CAMNOC_HF0, + .channels = 2, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_HF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_camnoc_nrt = { + .name = "qxm_camnoc_nrt", + .id = SM7150_MASTER_CAMNOC_NRT, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_camnoc_rt = { + .name = "qxm_camnoc_rt", + .id = SM7150_MASTER_CAMNOC_RT, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_HF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_camnoc_sf = { + .name = "qxm_camnoc_sf", + .id = SM7150_MASTER_CAMNOC_SF, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_mdp0 = { + .name = "qxm_mdp0", + .id = SM7150_MASTER_MDP_PORT0, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_HF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_mdp1 = { + .name = "qxm_mdp1", + .id = SM7150_MASTER_MDP_PORT1, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_HF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_rot = { + .name = "qxm_rot", + .id = SM7150_MASTER_ROTATOR, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_venus0 = { + .name = "qxm_venus0", + .id = SM7150_MASTER_VIDEO_P0, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_venus1 = { + .name = "qxm_venus1", + .id = SM7150_MASTER_VIDEO_P1, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qxm_venus_arm9 = { + .name = "qxm_venus_arm9", + .id = SM7150_MASTER_VIDEO_PROC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_SLAVE_MNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qhm_snoc_cfg = { + .name = "qhm_snoc_cfg", + .id = SM7150_MASTER_SNOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_SLAVE_SERVICE_SNOC }, +}; + +static struct qcom_icc_node qnm_aggre1_noc = { + .name = "qnm_aggre1_noc", + .id = SM7150_A1NOC_SNOC_MAS, + .channels = 1, + .buswidth = 16, + .num_links = 6, + .links = { SM7150_SLAVE_SNOC_GEM_NOC_SF, + SM7150_SLAVE_PIMEM, + SM7150_SLAVE_OCIMEM, + SM7150_SLAVE_APPSS, + SM7150_SNOC_CNOC_SLV, + SM7150_SLAVE_QDSS_STM + }, +}; + +static struct qcom_icc_node qnm_aggre2_noc = { + .name = "qnm_aggre2_noc", + .id = SM7150_A2NOC_SNOC_MAS, + .channels = 1, + .buswidth = 16, + .num_links = 7, + .links = { SM7150_SLAVE_SNOC_GEM_NOC_SF, + SM7150_SLAVE_PIMEM, + SM7150_SLAVE_OCIMEM, + SM7150_SLAVE_APPSS, + SM7150_SNOC_CNOC_SLV, + SM7150_SLAVE_TCU, + SM7150_SLAVE_QDSS_STM + }, +}; + +static struct qcom_icc_node qnm_gemnoc = { + .name = "qnm_gemnoc", + .id = SM7150_MASTER_GEM_NOC_SNOC, + .channels = 1, + .buswidth = 8, + .num_links = 6, + .links = { SM7150_SLAVE_PIMEM, + SM7150_SLAVE_OCIMEM, + SM7150_SLAVE_APPSS, + SM7150_SNOC_CNOC_SLV, + SM7150_SLAVE_TCU, + SM7150_SLAVE_QDSS_STM + }, +}; + +static struct qcom_icc_node qxm_pimem = { + .name = "qxm_pimem", + .id = SM7150_MASTER_PIMEM, + .channels = 1, + .buswidth = 8, + .num_links = 2, + .links = { SM7150_SLAVE_SNOC_GEM_NOC_GC, + SM7150_SLAVE_OCIMEM + }, +}; + +static struct qcom_icc_node xm_gic = { + .name = "xm_gic", + .id = SM7150_MASTER_GIC, + .channels = 1, + .buswidth = 8, + .num_links = 2, + .links = { SM7150_SLAVE_SNOC_GEM_NOC_GC, + SM7150_SLAVE_OCIMEM + }, +}; + +static struct qcom_icc_node qns_a1noc_snoc = { + .name = "qns_a1noc_snoc", + .id = SM7150_A1NOC_SNOC_SLV, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SM7150_A1NOC_SNOC_MAS }, +}; + +static struct qcom_icc_node srvc_aggre1_noc = { + .name = "srvc_aggre1_noc", + .id = SM7150_SLAVE_SERVICE_A1NOC, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qns_a2noc_snoc = { + .name = "qns_a2noc_snoc", + .id = SM7150_A2NOC_SNOC_SLV, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SM7150_A2NOC_SNOC_MAS }, +}; + +static struct qcom_icc_node qns_pcie_gemnoc = { + .name = "qns_pcie_gemnoc", + .id = SM7150_SLAVE_ANOC_PCIE_GEM_NOC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_MASTER_GEM_NOC_PCIE_SNOC }, +}; + +static struct qcom_icc_node srvc_aggre2_noc = { + .name = "srvc_aggre2_noc", + .id = SM7150_SLAVE_SERVICE_A2NOC, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qns_camnoc_uncomp = { + .name = "qns_camnoc_uncomp", + .id = SM7150_SLAVE_CAMNOC_UNCOMP, + .channels = 1, + .buswidth = 32, +}; + +static struct qcom_icc_node qns_cdsp_gemnoc = { + .name = "qns_cdsp_gemnoc", + .id = SM7150_SLAVE_CDSP_GEM_NOC, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_MASTER_COMPUTE_NOC }, +}; + +static struct qcom_icc_node qhs_a1_noc_cfg = { + .name = "qhs_a1_noc_cfg", + .id = SM7150_SLAVE_A1NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_MASTER_A1NOC_CFG }, +}; + +static struct qcom_icc_node qhs_a2_noc_cfg = { + .name = "qhs_a2_noc_cfg", + .id = SM7150_SLAVE_A2NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_MASTER_A2NOC_CFG }, +}; + +static struct qcom_icc_node qhs_ahb2phy_north = { + .name = "qhs_ahb2phy_north", + .id = SM7150_SLAVE_AHB2PHY_NORTH, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_ahb2phy_south = { + .name = "qhs_ahb2phy_south", + .id = SM7150_SLAVE_AHB2PHY_SOUTH, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_ahb2phy_west = { + .name = "qhs_ahb2phy_west", + .id = SM7150_SLAVE_AHB2PHY_WEST, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_aop = { + .name = "qhs_aop", + .id = SM7150_SLAVE_AOP, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_aoss = { + .name = "qhs_aoss", + .id = SM7150_SLAVE_AOSS, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_camera_cfg = { + .name = "qhs_camera_cfg", + .id = SM7150_SLAVE_CAMERA_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_camera_nrt_thrott_cfg = { + .name = "qhs_camera_nrt_thrott_cfg", + .id = SM7150_SLAVE_CAMERA_NRT_THROTTLE_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_camera_rt_throttle_cfg = { + .name = "qhs_camera_rt_throttle_cfg", + .id = SM7150_SLAVE_CAMERA_RT_THROTTLE_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_clk_ctl = { + .name = "qhs_clk_ctl", + .id = SM7150_SLAVE_CLK_CTL, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_compute_dsp_cfg = { + .name = "qhs_compute_dsp_cfg", + .id = SM7150_SLAVE_CDSP_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_cpr_cx = { + .name = "qhs_cpr_cx", + .id = SM7150_SLAVE_RBCPR_CX_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_cpr_mx = { + .name = "qhs_cpr_mx", + .id = SM7150_SLAVE_RBCPR_MX_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_crypto0_cfg = { + .name = "qhs_crypto0_cfg", + .id = SM7150_SLAVE_CRYPTO_0_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_ddrss_cfg = { + .name = "qhs_ddrss_cfg", + .id = SM7150_SLAVE_CNOC_DDRSS, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_MASTER_CNOC_DC_NOC }, +}; + +static struct qcom_icc_node qhs_display_cfg = { + .name = "qhs_display_cfg", + .id = SM7150_SLAVE_DISPLAY_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_display_throttle_cfg = { + .name = "qhs_display_throttle_cfg", + .id = SM7150_SLAVE_DISPLAY_THROTTLE_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_emmc_cfg = { + .name = "qhs_emmc_cfg", + .id = SM7150_SLAVE_EMMC_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_glm = { + .name = "qhs_glm", + .id = SM7150_SLAVE_GLM, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_gpuss_cfg = { + .name = "qhs_gpuss_cfg", + .id = SM7150_SLAVE_GRAPHICS_3D_CFG, + .channels = 1, + .buswidth = 8, +}; + +static struct qcom_icc_node qhs_imem_cfg = { + .name = "qhs_imem_cfg", + .id = SM7150_SLAVE_IMEM_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_ipa = { + .name = "qhs_ipa", + .id = SM7150_SLAVE_IPA_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_mnoc_cfg = { + .name = "qhs_mnoc_cfg", + .id = SM7150_SLAVE_CNOC_MNOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_MASTER_CNOC_MNOC_CFG }, +}; + +static struct qcom_icc_node qhs_pcie_cfg = { + .name = "qhs_pcie_cfg", + .id = SM7150_SLAVE_PCIE_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_pdm = { + .name = "qhs_pdm", + .id = SM7150_SLAVE_PDM, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_pimem_cfg = { + .name = "qhs_pimem_cfg", + .id = SM7150_SLAVE_PIMEM_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_prng = { + .name = "qhs_prng", + .id = SM7150_SLAVE_PRNG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_qdss_cfg = { + .name = "qhs_qdss_cfg", + .id = SM7150_SLAVE_QDSS_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_qupv3_center = { + .name = "qhs_qupv3_center", + .id = SM7150_SLAVE_QUP_0, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_qupv3_north = { + .name = "qhs_qupv3_north", + .id = SM7150_SLAVE_QUP_1, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_sdc2 = { + .name = "qhs_sdc2", + .id = SM7150_SLAVE_SDCC_2, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_sdc4 = { + .name = "qhs_sdc4", + .id = SM7150_SLAVE_SDCC_4, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_snoc_cfg = { + .name = "qhs_snoc_cfg", + .id = SM7150_SLAVE_SNOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_MASTER_SNOC_CFG }, +}; + +static struct qcom_icc_node qhs_spdm = { + .name = "qhs_spdm", + .id = SM7150_SLAVE_SPDM_WRAPPER, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_tcsr = { + .name = "qhs_tcsr", + .id = SM7150_SLAVE_TCSR, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_tlmm_north = { + .name = "qhs_tlmm_north", + .id = SM7150_SLAVE_TLMM_NORTH, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_tlmm_south = { + .name = "qhs_tlmm_south", + .id = SM7150_SLAVE_TLMM_SOUTH, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_tlmm_west = { + .name = "qhs_tlmm_west", + .id = SM7150_SLAVE_TLMM_WEST, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_tsif = { + .name = "qhs_tsif", + .id = SM7150_SLAVE_TSIF, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_ufs_mem_cfg = { + .name = "qhs_ufs_mem_cfg", + .id = SM7150_SLAVE_UFS_MEM_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_usb3_0 = { + .name = "qhs_usb3_0", + .id = SM7150_SLAVE_USB3, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_venus_cfg = { + .name = "qhs_venus_cfg", + .id = SM7150_SLAVE_VENUS_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_venus_cvp_throttle_cfg = { + .name = "qhs_venus_cvp_throttle_cfg", + .id = SM7150_SLAVE_VENUS_CVP_THROTTLE_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_venus_throttle_cfg = { + .name = "qhs_venus_throttle_cfg", + .id = SM7150_SLAVE_VENUS_THROTTLE_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_vsense_ctrl_cfg = { + .name = "qhs_vsense_ctrl_cfg", + .id = SM7150_SLAVE_VSENSE_CTRL_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qns_cnoc_a2noc = { + .name = "qns_cnoc_a2noc", + .id = SM7150_SLAVE_CNOC_A2NOC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_MASTER_CNOC_A2NOC }, +}; + +static struct qcom_icc_node srvc_cnoc = { + .name = "srvc_cnoc", + .id = SM7150_SLAVE_SERVICE_CNOC, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_gemnoc = { + .name = "qhs_gemnoc", + .id = SM7150_SLAVE_GEM_NOC_CFG, + .channels = 1, + .buswidth = 4, + .num_links = 1, + .links = { SM7150_MASTER_GEM_NOC_CFG }, +}; + +static struct qcom_icc_node qhs_llcc = { + .name = "qhs_llcc", + .id = SM7150_SLAVE_LLCC_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_mdsp_ms_mpu_cfg = { + .name = "qhs_mdsp_ms_mpu_cfg", + .id = SM7150_SLAVE_MSS_PROC_MS_MPU_CFG, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qns_gem_noc_snoc = { + .name = "qns_gem_noc_snoc", + .id = SM7150_SLAVE_GEM_NOC_SNOC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_MASTER_GEM_NOC_SNOC }, +}; + +static struct qcom_icc_node qns_llcc = { + .name = "qns_llcc", + .id = SM7150_SLAVE_LLCC, + .channels = 2, + .buswidth = 16, + .num_links = 1, + .links = { SM7150_MASTER_LLCC }, +}; + +static struct qcom_icc_node srvc_gemnoc = { + .name = "srvc_gemnoc", + .id = SM7150_SLAVE_SERVICE_GEM_NOC, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node ebi = { + .name = "ebi", + .id = SM7150_SLAVE_EBI_CH0, + .channels = 2, + .buswidth = 4, +}; + +static struct qcom_icc_node qns2_mem_noc = { + .name = "qns2_mem_noc", + .id = SM7150_SLAVE_MNOC_SF_MEM_NOC, + .channels = 1, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_MASTER_MNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qns_mem_noc_hf = { + .name = "qns_mem_noc_hf", + .id = SM7150_SLAVE_MNOC_HF_MEM_NOC, + .channels = 2, + .buswidth = 32, + .num_links = 1, + .links = { SM7150_MASTER_MNOC_HF_MEM_NOC }, +}; + +static struct qcom_icc_node srvc_mnoc = { + .name = "srvc_mnoc", + .id = SM7150_SLAVE_SERVICE_MNOC, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node qhs_apss = { + .name = "qhs_apss", + .id = SM7150_SLAVE_APPSS, + .channels = 1, + .buswidth = 8, +}; + +static struct qcom_icc_node qns_cnoc = { + .name = "qns_cnoc", + .id = SM7150_SNOC_CNOC_SLV, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_SNOC_CNOC_MAS }, +}; + +static struct qcom_icc_node qns_gemnoc_gc = { + .name = "qns_gemnoc_gc", + .id = SM7150_SLAVE_SNOC_GEM_NOC_GC, + .channels = 1, + .buswidth = 8, + .num_links = 1, + .links = { SM7150_MASTER_SNOC_GC_MEM_NOC }, +}; + +static struct qcom_icc_node qns_gemnoc_sf = { + .name = "qns_gemnoc_sf", + .id = SM7150_SLAVE_SNOC_GEM_NOC_SF, + .channels = 1, + .buswidth = 16, + .num_links = 1, + .links = { SM7150_MASTER_SNOC_SF_MEM_NOC }, +}; + +static struct qcom_icc_node qxs_imem = { + .name = "qxs_imem", + .id = SM7150_SLAVE_OCIMEM, + .channels = 1, + .buswidth = 8, +}; + +static struct qcom_icc_node qxs_pimem = { + .name = "qxs_pimem", + .id = SM7150_SLAVE_PIMEM, + .channels = 1, + .buswidth = 8, +}; + +static struct qcom_icc_node srvc_snoc = { + .name = "srvc_snoc", + .id = SM7150_SLAVE_SERVICE_SNOC, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node xs_qdss_stm = { + .name = "xs_qdss_stm", + .id = SM7150_SLAVE_QDSS_STM, + .channels = 1, + .buswidth = 4, +}; + +static struct qcom_icc_node xs_sys_tcu_cfg = { + .name = "xs_sys_tcu_cfg", + .id = SM7150_SLAVE_TCU, + .channels = 1, + .buswidth = 8, +}; + +static struct qcom_icc_bcm bcm_acv = { + .name = "ACV", + .enable_mask = BIT(3), + .keepalive = false, + .num_nodes = 1, + .nodes = { &ebi }, +}; + +static struct qcom_icc_bcm bcm_mc0 = { + .name = "MC0", + .keepalive = true, + .num_nodes = 1, + .nodes = { &ebi }, +}; + +static struct qcom_icc_bcm bcm_sh0 = { + .name = "SH0", + .keepalive = true, + .num_nodes = 1, + .nodes = { &qns_llcc }, +}; + +static struct qcom_icc_bcm bcm_mm0 = { + .name = "MM0", + .keepalive = true, + .num_nodes = 1, + .nodes = { &qns_mem_noc_hf }, +}; + +static struct qcom_icc_bcm bcm_mm1 = { + .name = "MM1", + .keepalive = true, + .num_nodes = 8, + .nodes = { &qxm_camnoc_hf0_uncomp, + &qxm_camnoc_rt_uncomp, + &qxm_camnoc_sf_uncomp, + &qxm_camnoc_nrt_uncomp, + &qxm_camnoc_hf, + &qxm_camnoc_rt, + &qxm_mdp0, + &qxm_mdp1 + }, +}; + +static struct qcom_icc_bcm bcm_sh2 = { + .name = "SH2", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qns_gem_noc_snoc }, +}; + +static struct qcom_icc_bcm bcm_sh3 = { + .name = "SH3", + .keepalive = false, + .num_nodes = 1, + .nodes = { &acm_sys_tcu }, +}; + +static struct qcom_icc_bcm bcm_mm2 = { + .name = "MM2", + .keepalive = false, + .num_nodes = 2, + .nodes = { &qxm_camnoc_nrt, + &qns2_mem_noc + }, +}; + +static struct qcom_icc_bcm bcm_mm3 = { + .name = "MM3", + .keepalive = false, + .num_nodes = 5, + .nodes = { &qxm_camnoc_sf, + &qxm_rot, + &qxm_venus0, + &qxm_venus1, + &qxm_venus_arm9 + }, +}; + +static struct qcom_icc_bcm bcm_sh5 = { + .name = "SH5", + .keepalive = false, + .num_nodes = 1, + .nodes = { &acm_apps }, +}; + +static struct qcom_icc_bcm bcm_sn0 = { + .name = "SN0", + .keepalive = true, + .num_nodes = 1, + .nodes = { &qns_gemnoc_sf }, +}; + +static struct qcom_icc_bcm bcm_sh8 = { + .name = "SH8", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qns_cdsp_gemnoc }, +}; + +static struct qcom_icc_bcm bcm_sh10 = { + .name = "SH10", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qnm_npu }, +}; + +static struct qcom_icc_bcm bcm_ce0 = { + .name = "CE0", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qxm_crypto }, +}; + +static struct qcom_icc_bcm bcm_cn0 = { + .name = "CN0", + .keepalive = true, + .num_nodes = 54, + .nodes = { &qhm_tsif, + &xm_emmc, + &xm_sdc2, + &xm_sdc4, + &qhm_spdm, + &qnm_snoc, + &qhs_a1_noc_cfg, + &qhs_a2_noc_cfg, + &qhs_ahb2phy_north, + &qhs_ahb2phy_south, + &qhs_ahb2phy_west, + &qhs_aop, + &qhs_aoss, + &qhs_camera_cfg, + &qhs_camera_nrt_thrott_cfg, + &qhs_camera_rt_throttle_cfg, + &qhs_clk_ctl, + &qhs_compute_dsp_cfg, + &qhs_cpr_cx, + &qhs_cpr_mx, + &qhs_crypto0_cfg, + &qhs_ddrss_cfg, + &qhs_display_cfg, + &qhs_display_throttle_cfg, + &qhs_emmc_cfg, + &qhs_glm, + &qhs_gpuss_cfg, + &qhs_imem_cfg, + &qhs_ipa, + &qhs_mnoc_cfg, + &qhs_pcie_cfg, + &qhs_pdm, + &qhs_pimem_cfg, + &qhs_prng, + &qhs_qdss_cfg, + &qhs_qupv3_center, + &qhs_qupv3_north, + &qhs_sdc2, + &qhs_sdc4, + &qhs_snoc_cfg, + &qhs_spdm, + &qhs_tcsr, + &qhs_tlmm_north, + &qhs_tlmm_south, + &qhs_tlmm_west, + &qhs_tsif, + &qhs_ufs_mem_cfg, + &qhs_usb3_0, + &qhs_venus_cfg, + &qhs_venus_cvp_throttle_cfg, + &qhs_venus_throttle_cfg, + &qhs_vsense_ctrl_cfg, + &qns_cnoc_a2noc, + &srvc_cnoc + }, +}; + +static struct qcom_icc_bcm bcm_qup0 = { + .name = "QUP0", + .keepalive = false, + .num_nodes = 2, + .nodes = { &qhm_qup_center, + &qhm_qup_north + }, +}; + +static struct qcom_icc_bcm bcm_sn1 = { + .name = "SN1", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qxs_imem }, +}; + +static struct qcom_icc_bcm bcm_sn2 = { + .name = "SN2", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qns_gemnoc_gc }, +}; + +static struct qcom_icc_bcm bcm_sn4 = { + .name = "SN4", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qxs_pimem }, +}; + +static struct qcom_icc_bcm bcm_sn9 = { + .name = "SN9", + .keepalive = false, + .num_nodes = 2, + .nodes = { &qnm_aggre1_noc, + &qns_a1noc_snoc + }, +}; + +static struct qcom_icc_bcm bcm_sn11 = { + .name = "SN11", + .keepalive = false, + .num_nodes = 2, + .nodes = { &qnm_aggre2_noc, + &qns_a2noc_snoc + }, +}; + +static struct qcom_icc_bcm bcm_sn12 = { + .name = "SN12", + .keepalive = false, + .num_nodes = 2, + .nodes = { &qxm_pimem, + &xm_gic + }, +}; + +static struct qcom_icc_bcm bcm_sn14 = { + .name = "SN14", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qns_pcie_gemnoc }, +}; + +static struct qcom_icc_bcm bcm_sn15 = { + .name = "SN15", + .keepalive = false, + .num_nodes = 1, + .nodes = { &qnm_gemnoc }, +}; + +static struct qcom_icc_bcm * const aggre1_noc_bcms[] = { + &bcm_cn0, + &bcm_qup0, + &bcm_sn9, +}; + +static struct qcom_icc_node * const aggre1_noc_nodes[] = { + [MASTER_A1NOC_CFG] = &qhm_a1noc_cfg, + [MASTER_QUP_0] = &qhm_qup_center, + [MASTER_TSIF] = &qhm_tsif, + [MASTER_EMMC] = &xm_emmc, + [MASTER_SDCC_2] = &xm_sdc2, + [MASTER_SDCC_4] = &xm_sdc4, + [MASTER_UFS_MEM] = &xm_ufs_mem, + [A1NOC_SNOC_SLV] = &qns_a1noc_snoc, + [SLAVE_SERVICE_A1NOC] = &srvc_aggre1_noc, +}; + +static const struct qcom_icc_desc sm7150_aggre1_noc = { + .nodes = aggre1_noc_nodes, + .num_nodes = ARRAY_SIZE(aggre1_noc_nodes), + .bcms = aggre1_noc_bcms, + .num_bcms = ARRAY_SIZE(aggre1_noc_bcms), +}; + +static struct qcom_icc_bcm * const aggre2_noc_bcms[] = { + &bcm_ce0, + &bcm_qup0, + &bcm_sn11, + &bcm_sn14, +}; + +static struct qcom_icc_node * const aggre2_noc_nodes[] = { + [MASTER_A2NOC_CFG] = &qhm_a2noc_cfg, + [MASTER_QDSS_BAM] = &qhm_qdss_bam, + [MASTER_QUP_1] = &qhm_qup_north, + [MASTER_CNOC_A2NOC] = &qnm_cnoc, + [MASTER_CRYPTO_CORE_0] = &qxm_crypto, + [MASTER_IPA] = &qxm_ipa, + [MASTER_PCIE] = &xm_pcie3_0, + [MASTER_QDSS_ETR] = &xm_qdss_etr, + [MASTER_USB3] = &xm_usb3_0, + [A2NOC_SNOC_SLV] = &qns_a2noc_snoc, + [SLAVE_ANOC_PCIE_GEM_NOC] = &qns_pcie_gemnoc, + [SLAVE_SERVICE_A2NOC] = &srvc_aggre2_noc, +}; + +static const struct qcom_icc_desc sm7150_aggre2_noc = { + .nodes = aggre2_noc_nodes, + .num_nodes = ARRAY_SIZE(aggre2_noc_nodes), + .bcms = aggre2_noc_bcms, + .num_bcms = ARRAY_SIZE(aggre2_noc_bcms), +}; + +static struct qcom_icc_bcm * const camnoc_virt_bcms[] = { + &bcm_mm1, +}; + +static struct qcom_icc_node * const camnoc_virt_nodes[] = { + [MASTER_CAMNOC_HF0_UNCOMP] = &qxm_camnoc_hf0_uncomp, + [MASTER_CAMNOC_RT_UNCOMP] = &qxm_camnoc_rt_uncomp, + [MASTER_CAMNOC_SF_UNCOMP] = &qxm_camnoc_sf_uncomp, + [MASTER_CAMNOC_NRT_UNCOMP] = &qxm_camnoc_nrt_uncomp, + [SLAVE_CAMNOC_UNCOMP] = &qns_camnoc_uncomp, +}; + +static const struct qcom_icc_desc sm7150_camnoc_virt = { + .nodes = camnoc_virt_nodes, + .num_nodes = ARRAY_SIZE(camnoc_virt_nodes), + .bcms = camnoc_virt_bcms, + .num_bcms = ARRAY_SIZE(camnoc_virt_bcms), +}; + +static struct qcom_icc_bcm * const compute_noc_bcms[] = { + &bcm_sh10, + &bcm_sh8, +}; + +static struct qcom_icc_node * const compute_noc_nodes[] = { + [MASTER_NPU] = &qnm_npu, + [SLAVE_CDSP_GEM_NOC] = &qns_cdsp_gemnoc, +}; + +static const struct qcom_icc_desc sm7150_compute_noc = { + .nodes = compute_noc_nodes, + .num_nodes = ARRAY_SIZE(compute_noc_nodes), + .bcms = compute_noc_bcms, + .num_bcms = ARRAY_SIZE(compute_noc_bcms), +}; + +static struct qcom_icc_bcm * const config_noc_bcms[] = { + &bcm_cn0, +}; + +static struct qcom_icc_node * const config_noc_nodes[] = { + [MASTER_SPDM] = &qhm_spdm, + [SNOC_CNOC_MAS] = &qnm_snoc, + [MASTER_QDSS_DAP] = &xm_qdss_dap, + [SLAVE_A1NOC_CFG] = &qhs_a1_noc_cfg, + [SLAVE_A2NOC_CFG] = &qhs_a2_noc_cfg, + [SLAVE_AHB2PHY_NORTH] = &qhs_ahb2phy_north, + [SLAVE_AHB2PHY_SOUTH] = &qhs_ahb2phy_south, + [SLAVE_AHB2PHY_WEST] = &qhs_ahb2phy_west, + [SLAVE_AOP] = &qhs_aop, + [SLAVE_AOSS] = &qhs_aoss, + [SLAVE_CAMERA_CFG] = &qhs_camera_cfg, + [SLAVE_CAMERA_NRT_THROTTLE_CFG] = &qhs_camera_nrt_thrott_cfg, + [SLAVE_CAMERA_RT_THROTTLE_CFG] = &qhs_camera_rt_throttle_cfg, + [SLAVE_CLK_CTL] = &qhs_clk_ctl, + [SLAVE_CDSP_CFG] = &qhs_compute_dsp_cfg, + [SLAVE_RBCPR_CX_CFG] = &qhs_cpr_cx, + [SLAVE_RBCPR_MX_CFG] = &qhs_cpr_mx, + [SLAVE_CRYPTO_0_CFG] = &qhs_crypto0_cfg, + [SLAVE_CNOC_DDRSS] = &qhs_ddrss_cfg, + [SLAVE_DISPLAY_CFG] = &qhs_display_cfg, + [SLAVE_DISPLAY_THROTTLE_CFG] = &qhs_display_throttle_cfg, + [SLAVE_EMMC_CFG] = &qhs_emmc_cfg, + [SLAVE_GLM] = &qhs_glm, + [SLAVE_GRAPHICS_3D_CFG] = &qhs_gpuss_cfg, + [SLAVE_IMEM_CFG] = &qhs_imem_cfg, + [SLAVE_IPA_CFG] = &qhs_ipa, + [SLAVE_CNOC_MNOC_CFG] = &qhs_mnoc_cfg, + [SLAVE_PCIE_CFG] = &qhs_pcie_cfg, + [SLAVE_PDM] = &qhs_pdm, + [SLAVE_PIMEM_CFG] = &qhs_pimem_cfg, + [SLAVE_PRNG] = &qhs_prng, + [SLAVE_QDSS_CFG] = &qhs_qdss_cfg, + [SLAVE_QUP_0] = &qhs_qupv3_center, + [SLAVE_QUP_1] = &qhs_qupv3_north, + [SLAVE_SDCC_2] = &qhs_sdc2, + [SLAVE_SDCC_4] = &qhs_sdc4, + [SLAVE_SNOC_CFG] = &qhs_snoc_cfg, + [SLAVE_SPDM_WRAPPER] = &qhs_spdm, + [SLAVE_TCSR] = &qhs_tcsr, + [SLAVE_TLMM_NORTH] = &qhs_tlmm_north, + [SLAVE_TLMM_SOUTH] = &qhs_tlmm_south, + [SLAVE_TLMM_WEST] = &qhs_tlmm_west, + [SLAVE_TSIF] = &qhs_tsif, + [SLAVE_UFS_MEM_CFG] = &qhs_ufs_mem_cfg, + [SLAVE_USB3] = &qhs_usb3_0, + [SLAVE_VENUS_CFG] = &qhs_venus_cfg, + [SLAVE_VENUS_CVP_THROTTLE_CFG] = &qhs_venus_cvp_throttle_cfg, + [SLAVE_VENUS_THROTTLE_CFG] = &qhs_venus_throttle_cfg, + [SLAVE_VSENSE_CTRL_CFG] = &qhs_vsense_ctrl_cfg, + [SLAVE_CNOC_A2NOC] = &qns_cnoc_a2noc, + [SLAVE_SERVICE_CNOC] = &srvc_cnoc, +}; + +static const struct qcom_icc_desc sm7150_config_noc = { + .nodes = config_noc_nodes, + .num_nodes = ARRAY_SIZE(config_noc_nodes), + .bcms = config_noc_bcms, + .num_bcms = ARRAY_SIZE(config_noc_bcms), +}; + +static struct qcom_icc_bcm * const dc_noc_bcms[] = { +}; + +static struct qcom_icc_node * const dc_noc_nodes[] = { + [MASTER_CNOC_DC_NOC] = &qhm_cnoc_dc_noc, + [SLAVE_GEM_NOC_CFG] = &qhs_gemnoc, + [SLAVE_LLCC_CFG] = &qhs_llcc, +}; + +static const struct qcom_icc_desc sm7150_dc_noc = { + .nodes = dc_noc_nodes, + .num_nodes = ARRAY_SIZE(dc_noc_nodes), + .bcms = dc_noc_bcms, + .num_bcms = ARRAY_SIZE(dc_noc_bcms), +}; + +static struct qcom_icc_bcm * const gem_noc_bcms[] = { + &bcm_sh0, + &bcm_sh2, + &bcm_sh3, + &bcm_sh5, +}; + +static struct qcom_icc_node * const gem_noc_nodes[] = { + [MASTER_AMPSS_M0] = &acm_apps, + [MASTER_SYS_TCU] = &acm_sys_tcu, + [MASTER_GEM_NOC_CFG] = &qhm_gemnoc_cfg, + [MASTER_COMPUTE_NOC] = &qnm_cmpnoc, + [MASTER_MNOC_HF_MEM_NOC] = &qnm_mnoc_hf, + [MASTER_MNOC_SF_MEM_NOC] = &qnm_mnoc_sf, + [MASTER_GEM_NOC_PCIE_SNOC] = &qnm_pcie, + [MASTER_SNOC_GC_MEM_NOC] = &qnm_snoc_gc, + [MASTER_SNOC_SF_MEM_NOC] = &qnm_snoc_sf, + [MASTER_GRAPHICS_3D] = &qxm_gpu, + [SLAVE_MSS_PROC_MS_MPU_CFG] = &qhs_mdsp_ms_mpu_cfg, + [SLAVE_GEM_NOC_SNOC] = &qns_gem_noc_snoc, + [SLAVE_LLCC] = &qns_llcc, + [SLAVE_SERVICE_GEM_NOC] = &srvc_gemnoc, +}; + +static const struct qcom_icc_desc sm7150_gem_noc = { + .nodes = gem_noc_nodes, + .num_nodes = ARRAY_SIZE(gem_noc_nodes), + .bcms = gem_noc_bcms, + .num_bcms = ARRAY_SIZE(gem_noc_bcms), +}; + +static struct qcom_icc_bcm * const mc_virt_bcms[] = { + &bcm_acv, + &bcm_mc0, +}; + +static struct qcom_icc_node * const mc_virt_nodes[] = { + [MASTER_LLCC] = &llcc_mc, + [SLAVE_EBI_CH0] = &ebi, +}; + +static const struct qcom_icc_desc sm7150_mc_virt = { + .nodes = mc_virt_nodes, + .num_nodes = ARRAY_SIZE(mc_virt_nodes), + .bcms = mc_virt_bcms, + .num_bcms = ARRAY_SIZE(mc_virt_bcms), +}; + +static struct qcom_icc_bcm * const mmss_noc_bcms[] = { + &bcm_mm0, + &bcm_mm1, + &bcm_mm2, + &bcm_mm3, +}; + +static struct qcom_icc_node * const mmss_noc_nodes[] = { + [MASTER_CNOC_MNOC_CFG] = &qhm_mnoc_cfg, + [MASTER_CAMNOC_HF0] = &qxm_camnoc_hf, + [MASTER_CAMNOC_NRT] = &qxm_camnoc_nrt, + [MASTER_CAMNOC_RT] = &qxm_camnoc_rt, + [MASTER_CAMNOC_SF] = &qxm_camnoc_sf, + [MASTER_MDP_PORT0] = &qxm_mdp0, + [MASTER_MDP_PORT1] = &qxm_mdp1, + [MASTER_ROTATOR] = &qxm_rot, + [MASTER_VIDEO_P0] = &qxm_venus0, + [MASTER_VIDEO_P1] = &qxm_venus1, + [MASTER_VIDEO_PROC] = &qxm_venus_arm9, + [SLAVE_MNOC_SF_MEM_NOC] = &qns2_mem_noc, + [SLAVE_MNOC_HF_MEM_NOC] = &qns_mem_noc_hf, + [SLAVE_SERVICE_MNOC] = &srvc_mnoc, +}; + +static const struct qcom_icc_desc sm7150_mmss_noc = { + .nodes = mmss_noc_nodes, + .num_nodes = ARRAY_SIZE(mmss_noc_nodes), + .bcms = mmss_noc_bcms, + .num_bcms = ARRAY_SIZE(mmss_noc_bcms), +}; + +static struct qcom_icc_bcm * const system_noc_bcms[] = { + &bcm_sn0, + &bcm_sn1, + &bcm_sn11, + &bcm_sn12, + &bcm_sn15, + &bcm_sn2, + &bcm_sn4, + &bcm_sn9, +}; + +static struct qcom_icc_node * const system_noc_nodes[] = { + [MASTER_SNOC_CFG] = &qhm_snoc_cfg, + [A1NOC_SNOC_MAS] = &qnm_aggre1_noc, + [A2NOC_SNOC_MAS] = &qnm_aggre2_noc, + [MASTER_GEM_NOC_SNOC] = &qnm_gemnoc, + [MASTER_PIMEM] = &qxm_pimem, + [MASTER_GIC] = &xm_gic, + [SLAVE_APPSS] = &qhs_apss, + [SNOC_CNOC_SLV] = &qns_cnoc, + [SLAVE_SNOC_GEM_NOC_GC] = &qns_gemnoc_gc, + [SLAVE_SNOC_GEM_NOC_SF] = &qns_gemnoc_sf, + [SLAVE_OCIMEM] = &qxs_imem, + [SLAVE_PIMEM] = &qxs_pimem, + [SLAVE_SERVICE_SNOC] = &srvc_snoc, + [SLAVE_QDSS_STM] = &xs_qdss_stm, + [SLAVE_TCU] = &xs_sys_tcu_cfg, +}; + +static const struct qcom_icc_desc sm7150_system_noc = { + .nodes = system_noc_nodes, + .num_nodes = ARRAY_SIZE(system_noc_nodes), + .bcms = system_noc_bcms, + .num_bcms = ARRAY_SIZE(system_noc_bcms), +}; + +static const struct of_device_id qnoc_of_match[] = { + { .compatible = "qcom,sm7150-aggre1-noc", .data = &sm7150_aggre1_noc }, + { .compatible = "qcom,sm7150-aggre2-noc", .data = &sm7150_aggre2_noc }, + { .compatible = "qcom,sm7150-camnoc-virt", .data = &sm7150_camnoc_virt }, + { .compatible = "qcom,sm7150-compute-noc", .data = &sm7150_compute_noc }, + { .compatible = "qcom,sm7150-config-noc", .data = &sm7150_config_noc }, + { .compatible = "qcom,sm7150-dc-noc", .data = &sm7150_dc_noc }, + { .compatible = "qcom,sm7150-gem-noc", .data = &sm7150_gem_noc }, + { .compatible = "qcom,sm7150-mc-virt", .data = &sm7150_mc_virt }, + { .compatible = "qcom,sm7150-mmss-noc", .data = &sm7150_mmss_noc }, + { .compatible = "qcom,sm7150-system-noc", .data = &sm7150_system_noc }, + { } +}; +MODULE_DEVICE_TABLE(of, qnoc_of_match); + +static struct platform_driver qnoc_driver = { + .probe = qcom_icc_rpmh_probe, + .remove_new = qcom_icc_rpmh_remove, + .driver = { + .name = "qnoc-sm7150", + .of_match_table = qnoc_of_match, + .sync_state = icc_sync_state, + }, +}; + +static int __init qnoc_driver_init(void) +{ + return platform_driver_register(&qnoc_driver); +} +core_initcall(qnoc_driver_init); + +static void __exit qnoc_driver_exit(void) +{ + platform_driver_unregister(&qnoc_driver); +} +module_exit(qnoc_driver_exit); + +MODULE_DESCRIPTION("Qualcomm SM7150 NoC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/interconnect/qcom/sm7150.h b/drivers/interconnect/qcom/sm7150.h new file mode 100644 index 000000000000..e00a9b0c1279 --- /dev/null +++ b/drivers/interconnect/qcom/sm7150.h @@ -0,0 +1,140 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Qualcomm #define SM7150 interconnect IDs + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Danila Tikhonov + */ + +#ifndef __DRIVERS_INTERCONNECT_QCOM_SM7150_H +#define __DRIVERS_INTERCONNECT_QCOM_SM7150_H + +#define SM7150_A1NOC_SNOC_MAS 0 +#define SM7150_A1NOC_SNOC_SLV 1 +#define SM7150_A2NOC_SNOC_MAS 2 +#define SM7150_A2NOC_SNOC_SLV 3 +#define SM7150_MASTER_A1NOC_CFG 4 +#define SM7150_MASTER_A2NOC_CFG 5 +#define SM7150_MASTER_AMPSS_M0 6 +#define SM7150_MASTER_CAMNOC_HF0 7 +#define SM7150_MASTER_CAMNOC_HF0_UNCOMP 8 +#define SM7150_MASTER_CAMNOC_NRT 9 +#define SM7150_MASTER_CAMNOC_NRT_UNCOMP 10 +#define SM7150_MASTER_CAMNOC_RT 11 +#define SM7150_MASTER_CAMNOC_RT_UNCOMP 12 +#define SM7150_MASTER_CAMNOC_SF 13 +#define SM7150_MASTER_CAMNOC_SF_UNCOMP 14 +#define SM7150_MASTER_CNOC_A2NOC 15 +#define SM7150_MASTER_CNOC_DC_NOC 16 +#define SM7150_MASTER_CNOC_MNOC_CFG 17 +#define SM7150_MASTER_COMPUTE_NOC 18 +#define SM7150_MASTER_CRYPTO_CORE_0 19 +#define SM7150_MASTER_EMMC 20 +#define SM7150_MASTER_GEM_NOC_CFG 21 +#define SM7150_MASTER_GEM_NOC_PCIE_SNOC 22 +#define SM7150_MASTER_GEM_NOC_SNOC 23 +#define SM7150_MASTER_GIC 24 +#define SM7150_MASTER_GRAPHICS_3D 25 +#define SM7150_MASTER_IPA 26 +#define SM7150_MASTER_LLCC 27 +#define SM7150_MASTER_MDP_PORT0 28 +#define SM7150_MASTER_MDP_PORT1 29 +#define SM7150_MASTER_MNOC_HF_MEM_NOC 30 +#define SM7150_MASTER_MNOC_SF_MEM_NOC 31 +#define SM7150_MASTER_NPU 32 +#define SM7150_MASTER_PCIE 33 +#define SM7150_MASTER_PIMEM 34 +#define SM7150_MASTER_QDSS_BAM 35 +#define SM7150_MASTER_QDSS_DAP 36 +#define SM7150_MASTER_QDSS_ETR 37 +#define SM7150_MASTER_QUP_0 38 +#define SM7150_MASTER_QUP_1 39 +#define SM7150_MASTER_ROTATOR 40 +#define SM7150_MASTER_SDCC_2 41 +#define SM7150_MASTER_SDCC_4 42 +#define SM7150_MASTER_SNOC_CFG 43 +#define SM7150_MASTER_SNOC_GC_MEM_NOC 44 +#define SM7150_MASTER_SNOC_SF_MEM_NOC 45 +#define SM7150_MASTER_SPDM 46 +#define SM7150_MASTER_SYS_TCU 47 +#define SM7150_MASTER_TSIF 48 +#define SM7150_MASTER_UFS_MEM 49 +#define SM7150_MASTER_USB3 50 +#define SM7150_MASTER_VIDEO_P0 51 +#define SM7150_MASTER_VIDEO_P1 52 +#define SM7150_MASTER_VIDEO_PROC 53 +#define SM7150_SLAVE_A1NOC_CFG 54 +#define SM7150_SLAVE_A2NOC_CFG 55 +#define SM7150_SLAVE_AHB2PHY_NORTH 56 +#define SM7150_SLAVE_AHB2PHY_SOUTH 57 +#define SM7150_SLAVE_AHB2PHY_WEST 58 +#define SM7150_SLAVE_ANOC_PCIE_GEM_NOC 59 +#define SM7150_SLAVE_AOP 60 +#define SM7150_SLAVE_AOSS 61 +#define SM7150_SLAVE_APPSS 62 +#define SM7150_SLAVE_CAMERA_CFG 63 +#define SM7150_SLAVE_CAMERA_NRT_THROTTLE_CFG 64 +#define SM7150_SLAVE_CAMERA_RT_THROTTLE_CFG 65 +#define SM7150_SLAVE_CAMNOC_UNCOMP 66 +#define SM7150_SLAVE_CDSP_CFG 67 +#define SM7150_SLAVE_CDSP_GEM_NOC 68 +#define SM7150_SLAVE_CLK_CTL 69 +#define SM7150_SLAVE_CNOC_A2NOC 70 +#define SM7150_SLAVE_CNOC_DDRSS 71 +#define SM7150_SLAVE_CNOC_MNOC_CFG 72 +#define SM7150_SLAVE_CRYPTO_0_CFG 73 +#define SM7150_SLAVE_DISPLAY_CFG 74 +#define SM7150_SLAVE_DISPLAY_THROTTLE_CFG 75 +#define SM7150_SLAVE_EBI_CH0 76 +#define SM7150_SLAVE_EMMC_CFG 77 +#define SM7150_SLAVE_GEM_NOC_CFG 78 +#define SM7150_SLAVE_GEM_NOC_SNOC 79 +#define SM7150_SLAVE_GLM 80 +#define SM7150_SLAVE_GRAPHICS_3D_CFG 81 +#define SM7150_SLAVE_IMEM_CFG 82 +#define SM7150_SLAVE_IPA_CFG 83 +#define SM7150_SLAVE_LLCC 84 +#define SM7150_SLAVE_LLCC_CFG 85 +#define SM7150_SLAVE_MNOC_HF_MEM_NOC 86 +#define SM7150_SLAVE_MNOC_SF_MEM_NOC 87 +#define SM7150_SLAVE_MSS_PROC_MS_MPU_CFG 88 +#define SM7150_SLAVE_OCIMEM 89 +#define SM7150_SLAVE_PCIE_CFG 90 +#define SM7150_SLAVE_PDM 91 +#define SM7150_SLAVE_PIMEM 92 +#define SM7150_SLAVE_PIMEM_CFG 93 +#define SM7150_SLAVE_PRNG 94 +#define SM7150_SLAVE_QDSS_CFG 95 +#define SM7150_SLAVE_QDSS_STM 96 +#define SM7150_SLAVE_QUP_0 97 +#define SM7150_SLAVE_QUP_1 98 +#define SM7150_SLAVE_RBCPR_CX_CFG 99 +#define SM7150_SLAVE_RBCPR_MX_CFG 100 +#define SM7150_SLAVE_SDCC_2 101 +#define SM7150_SLAVE_SDCC_4 102 +#define SM7150_SLAVE_SERVICE_A1NOC 103 +#define SM7150_SLAVE_SERVICE_A2NOC 104 +#define SM7150_SLAVE_SERVICE_CNOC 105 +#define SM7150_SLAVE_SERVICE_GEM_NOC 106 +#define SM7150_SLAVE_SERVICE_MNOC 107 +#define SM7150_SLAVE_SERVICE_SNOC 108 +#define SM7150_SLAVE_SNOC_CFG 109 +#define SM7150_SLAVE_SNOC_GEM_NOC_GC 110 +#define SM7150_SLAVE_SNOC_GEM_NOC_SF 111 +#define SM7150_SLAVE_SPDM_WRAPPER 112 +#define SM7150_SLAVE_TCSR 113 +#define SM7150_SLAVE_TCU 114 +#define SM7150_SLAVE_TLMM_NORTH 115 +#define SM7150_SLAVE_TLMM_SOUTH 116 +#define SM7150_SLAVE_TLMM_WEST 117 +#define SM7150_SLAVE_TSIF 118 +#define SM7150_SLAVE_UFS_MEM_CFG 119 +#define SM7150_SLAVE_USB3 120 +#define SM7150_SLAVE_VENUS_CFG 121 +#define SM7150_SLAVE_VENUS_CVP_THROTTLE_CFG 122 +#define SM7150_SLAVE_VENUS_THROTTLE_CFG 123 +#define SM7150_SLAVE_VSENSE_CTRL_CFG 124 +#define SM7150_SNOC_CNOC_MAS 125 +#define SM7150_SNOC_CNOC_SLV 126 + +#endif -- cgit v1.2.3 From d6543805a8ad6ffcddf5ffdfb3b27dcee3806474 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 29 Feb 2024 12:12:58 -0600 Subject: mei: gsc: remove unnecessary NULL pointer checks The .remove() and power management callbacks are never called unless .probe() has already returned success, which means it has set drvdata to a non-NULL pointer, so "dev" can never be NULL in the other callbacks. Remove the unnecessary checks. Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20240229181300.352077-2-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/gsc-me.c | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c index 9e558ec2ea1d..5a8c26c3df13 100644 --- a/drivers/misc/mei/gsc-me.c +++ b/drivers/misc/mei/gsc-me.c @@ -144,9 +144,6 @@ static void mei_gsc_remove(struct auxiliary_device *aux_dev) struct mei_me_hw *hw; dev = dev_get_drvdata(&aux_dev->dev); - if (!dev) - return; - hw = to_me_hw(dev); mei_stop(dev); @@ -168,9 +165,6 @@ static int __maybe_unused mei_gsc_pm_suspend(struct device *device) { struct mei_device *dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; - mei_stop(dev); mei_disable_interrupts(dev); @@ -186,9 +180,6 @@ static int __maybe_unused mei_gsc_pm_resume(struct device *device) int err; struct mei_me_hw *hw; - if (!dev) - return -ENODEV; - hw = to_me_hw(dev); aux_dev = to_auxiliary_dev(device); adev = auxiliary_dev_to_mei_aux_dev(aux_dev); @@ -211,8 +202,6 @@ static int __maybe_unused mei_gsc_pm_runtime_idle(struct device *device) { struct mei_device *dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; if (mei_write_is_idle(dev)) pm_runtime_autosuspend(device); @@ -225,9 +214,6 @@ static int __maybe_unused mei_gsc_pm_runtime_suspend(struct device *device) struct mei_me_hw *hw; int ret; - if (!dev) - return -ENODEV; - mutex_lock(&dev->device_lock); if (mei_write_is_idle(dev)) { @@ -252,9 +238,6 @@ static int __maybe_unused mei_gsc_pm_runtime_resume(struct device *device) struct mei_me_hw *hw; irqreturn_t irq_ret; - if (!dev) - return -ENODEV; - mutex_lock(&dev->device_lock); hw = to_me_hw(dev); -- cgit v1.2.3 From 64386d1588f53ccde07cfeb04cddf2f6d1a75a40 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 29 Feb 2024 12:12:59 -0600 Subject: mei: txe: remove unnecessary NULL pointer checks The .shutdown(), .remove(), and power management callbacks are never called unless .probe() has already returned success, which means it has set drvdata to a non-NULL pointer, so "dev" can never be NULL in the other callbacks. Remove the unnecessary checks. Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20240229181300.352077-3-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pci-txe.c | 40 ++++++---------------------------------- 1 file changed, 6 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c index fa20d9a27813..2a584104ba38 100644 --- a/drivers/misc/mei/pci-txe.c +++ b/drivers/misc/mei/pci-txe.c @@ -166,11 +166,7 @@ end: */ static void mei_txe_shutdown(struct pci_dev *pdev) { - struct mei_device *dev; - - dev = pci_get_drvdata(pdev); - if (!dev) - return; + struct mei_device *dev = pci_get_drvdata(pdev); dev_dbg(&pdev->dev, "shutdown\n"); mei_stop(dev); @@ -191,13 +187,7 @@ static void mei_txe_shutdown(struct pci_dev *pdev) */ static void mei_txe_remove(struct pci_dev *pdev) { - struct mei_device *dev; - - dev = pci_get_drvdata(pdev); - if (!dev) { - dev_err(&pdev->dev, "mei: dev == NULL\n"); - return; - } + struct mei_device *dev = pci_get_drvdata(pdev); pm_runtime_get_noresume(&pdev->dev); @@ -218,9 +208,6 @@ static int mei_txe_pci_suspend(struct device *device) struct pci_dev *pdev = to_pci_dev(device); struct mei_device *dev = pci_get_drvdata(pdev); - if (!dev) - return -ENODEV; - dev_dbg(&pdev->dev, "suspend\n"); mei_stop(dev); @@ -236,13 +223,9 @@ static int mei_txe_pci_suspend(struct device *device) static int mei_txe_pci_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct mei_device *dev; + struct mei_device *dev = pci_get_drvdata(pdev); int err; - dev = pci_get_drvdata(pdev); - if (!dev) - return -ENODEV; - pci_enable_msi(pdev); mei_clear_interrupts(dev); @@ -273,13 +256,10 @@ static int mei_txe_pci_resume(struct device *device) #ifdef CONFIG_PM static int mei_txe_pm_runtime_idle(struct device *device) { - struct mei_device *dev; + struct mei_device *dev = dev_get_drvdata(device); dev_dbg(device, "rpm: txe: runtime_idle\n"); - dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; if (mei_write_is_idle(dev)) pm_runtime_autosuspend(device); @@ -287,15 +267,11 @@ static int mei_txe_pm_runtime_idle(struct device *device) } static int mei_txe_pm_runtime_suspend(struct device *device) { - struct mei_device *dev; + struct mei_device *dev = dev_get_drvdata(device); int ret; dev_dbg(device, "rpm: txe: runtime suspend\n"); - dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; - mutex_lock(&dev->device_lock); if (mei_write_is_idle(dev)) @@ -317,15 +293,11 @@ static int mei_txe_pm_runtime_suspend(struct device *device) static int mei_txe_pm_runtime_resume(struct device *device) { - struct mei_device *dev; + struct mei_device *dev = dev_get_drvdata(device); int ret; dev_dbg(device, "rpm: txe: runtime resume\n"); - dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; - mutex_lock(&dev->device_lock); mei_enable_interrupts(dev); -- cgit v1.2.3 From e37db17dae6113f8f0b620753de5a1f9cb482771 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 29 Feb 2024 12:13:00 -0600 Subject: mei: me: remove unnecessary NULL pointer checks The .shutdown(), .remove(), and power management callbacks are never called unless .probe() has already returned success, which means it has set drvdata to a non-NULL pointer, so "dev" can never be NULL in the other callbacks. Remove the unnecessary checks. Signed-off-by: Bjorn Helgaas Link: https://lore.kernel.org/r/20240229181300.352077-4-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pci-me.c | 38 ++++++-------------------------------- 1 file changed, 6 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 676d566f38dd..1f0d983d3f06 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -295,11 +295,7 @@ end: */ static void mei_me_shutdown(struct pci_dev *pdev) { - struct mei_device *dev; - - dev = pci_get_drvdata(pdev); - if (!dev) - return; + struct mei_device *dev = pci_get_drvdata(pdev); dev_dbg(&pdev->dev, "shutdown\n"); mei_stop(dev); @@ -320,11 +316,7 @@ static void mei_me_shutdown(struct pci_dev *pdev) */ static void mei_me_remove(struct pci_dev *pdev) { - struct mei_device *dev; - - dev = pci_get_drvdata(pdev); - if (!dev) - return; + struct mei_device *dev = pci_get_drvdata(pdev); if (mei_pg_is_enabled(dev)) pm_runtime_get_noresume(&pdev->dev); @@ -353,9 +345,6 @@ static int mei_me_pci_suspend(struct device *device) struct pci_dev *pdev = to_pci_dev(device); struct mei_device *dev = pci_get_drvdata(pdev); - if (!dev) - return -ENODEV; - dev_dbg(&pdev->dev, "suspend\n"); mei_stop(dev); @@ -371,14 +360,10 @@ static int mei_me_pci_suspend(struct device *device) static int mei_me_pci_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct mei_device *dev; + struct mei_device *dev = pci_get_drvdata(pdev); unsigned int irqflags; int err; - dev = pci_get_drvdata(pdev); - if (!dev) - return -ENODEV; - pci_enable_msi(pdev); irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED; @@ -419,13 +404,10 @@ static void mei_me_pci_complete(struct device *device) #ifdef CONFIG_PM static int mei_me_pm_runtime_idle(struct device *device) { - struct mei_device *dev; + struct mei_device *dev = dev_get_drvdata(device); dev_dbg(device, "rpm: me: runtime_idle\n"); - dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; if (mei_write_is_idle(dev)) pm_runtime_autosuspend(device); @@ -434,15 +416,11 @@ static int mei_me_pm_runtime_idle(struct device *device) static int mei_me_pm_runtime_suspend(struct device *device) { - struct mei_device *dev; + struct mei_device *dev = dev_get_drvdata(device); int ret; dev_dbg(device, "rpm: me: runtime suspend\n"); - dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; - mutex_lock(&dev->device_lock); if (mei_write_is_idle(dev)) @@ -462,15 +440,11 @@ static int mei_me_pm_runtime_suspend(struct device *device) static int mei_me_pm_runtime_resume(struct device *device) { - struct mei_device *dev; + struct mei_device *dev = dev_get_drvdata(device); int ret; dev_dbg(device, "rpm: me: runtime resume\n"); - dev = dev_get_drvdata(device); - if (!dev) - return -ENODEV; - mutex_lock(&dev->device_lock); ret = mei_me_pg_exit_sync(dev); -- cgit v1.2.3 From 058a38acba15fd8e7b262ec6e17c4204cb15f984 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 19 Feb 2024 21:58:05 +0200 Subject: mei: vsc: Call wake_up() in the threaded IRQ handler The hard IRQ handler vsc_tp_irq() is called with a raw spinlock taken. wake_up() acquires a spinlock, a sleeping lock on PREEMPT_RT. This leads to sleeping in atomic context. Move the wake_up() call to the threaded IRQ handler vsc_tp_thread_isr() where it can be safely called. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Signed-off-by: Sakari Ailus Tested-and-Reviewed-by: Wentong Wu Link: https://lore.kernel.org/r/20240219195807.517742-2-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/vsc-tp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/vsc-tp.c b/drivers/misc/mei/vsc-tp.c index 6f4a4be6ccb5..2b69ada9349e 100644 --- a/drivers/misc/mei/vsc-tp.c +++ b/drivers/misc/mei/vsc-tp.c @@ -416,8 +416,6 @@ static irqreturn_t vsc_tp_isr(int irq, void *data) atomic_inc(&tp->assert_cnt); - wake_up(&tp->xfer_wait); - return IRQ_WAKE_THREAD; } @@ -425,6 +423,8 @@ static irqreturn_t vsc_tp_thread_isr(int irq, void *data) { struct vsc_tp *tp = data; + wake_up(&tp->xfer_wait); + if (tp->event_notify) tp->event_notify(tp->event_notify_context); -- cgit v1.2.3 From b8b19acfafdeacbedd4e2795cb18c81c4d8bb6cc Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 19 Feb 2024 21:58:06 +0200 Subject: mei: vsc: Don't use sleeping condition in wait_event_timeout() vsc_tp_wakeup_request() called wait_event_timeout() with gpiod_get_value_cansleep() which may sleep, and does so as the implementation is that of gpio-ljca. Move the GPIO state check outside the call. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Signed-off-by: Sakari Ailus Tested-and-Reviewed-by: Wentong Wu Link: https://lore.kernel.org/r/20240219195807.517742-3-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/vsc-tp.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/vsc-tp.c b/drivers/misc/mei/vsc-tp.c index 2b69ada9349e..7b678005652b 100644 --- a/drivers/misc/mei/vsc-tp.c +++ b/drivers/misc/mei/vsc-tp.c @@ -25,7 +25,8 @@ #define VSC_TP_ROM_BOOTUP_DELAY_MS 10 #define VSC_TP_ROM_XFER_POLL_TIMEOUT_US (500 * USEC_PER_MSEC) #define VSC_TP_ROM_XFER_POLL_DELAY_US (20 * USEC_PER_MSEC) -#define VSC_TP_WAIT_FW_ASSERTED_TIMEOUT (2 * HZ) +#define VSC_TP_WAIT_FW_POLL_TIMEOUT (2 * HZ) +#define VSC_TP_WAIT_FW_POLL_DELAY_US (20 * USEC_PER_MSEC) #define VSC_TP_MAX_XFER_COUNT 5 #define VSC_TP_PACKET_SYNC 0x31 @@ -101,13 +102,15 @@ static int vsc_tp_wakeup_request(struct vsc_tp *tp) gpiod_set_value_cansleep(tp->wakeupfw, 0); ret = wait_event_timeout(tp->xfer_wait, - atomic_read(&tp->assert_cnt) && - gpiod_get_value_cansleep(tp->wakeuphost), - VSC_TP_WAIT_FW_ASSERTED_TIMEOUT); + atomic_read(&tp->assert_cnt), + VSC_TP_WAIT_FW_POLL_TIMEOUT); if (!ret) return -ETIMEDOUT; - return 0; + return read_poll_timeout(gpiod_get_value_cansleep, ret, ret, + VSC_TP_WAIT_FW_POLL_DELAY_US, + VSC_TP_WAIT_FW_POLL_TIMEOUT, false, + tp->wakeuphost); } static void vsc_tp_wakeup_release(struct vsc_tp *tp) -- cgit v1.2.3 From 33a2120b875f9b93b6ea2db2cc8f706a9eb3e35d Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 19 Feb 2024 21:58:07 +0200 Subject: mei: vsc: Assign pinfo fields in variable declaration Assign all possible fields of pinfo in variable declaration, instead of just zeroing it there. Signed-off-by: Sakari Ailus Tested-and-Reviewed-by: Wentong Wu Link: https://lore.kernel.org/r/20240219195807.517742-4-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/vsc-tp.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/vsc-tp.c b/drivers/misc/mei/vsc-tp.c index 7b678005652b..9b4584d67a1b 100644 --- a/drivers/misc/mei/vsc-tp.c +++ b/drivers/misc/mei/vsc-tp.c @@ -445,11 +445,16 @@ static int vsc_tp_match_any(struct acpi_device *adev, void *data) static int vsc_tp_probe(struct spi_device *spi) { - struct platform_device_info pinfo = { 0 }; + struct vsc_tp *tp; + struct platform_device_info pinfo = { + .name = "intel_vsc", + .data = &tp, + .size_data = sizeof(tp), + .id = PLATFORM_DEVID_NONE, + }; struct device *dev = &spi->dev; struct platform_device *pdev; struct acpi_device *adev; - struct vsc_tp *tp; int ret; tp = devm_kzalloc(dev, sizeof(*tp), GFP_KERNEL); @@ -501,13 +506,8 @@ static int vsc_tp_probe(struct spi_device *spi) ret = -ENODEV; goto err_destroy_lock; } - pinfo.fwnode = acpi_fwnode_handle(adev); - - pinfo.name = "intel_vsc"; - pinfo.data = &tp; - pinfo.size_data = sizeof(tp); - pinfo.id = PLATFORM_DEVID_NONE; + pinfo.fwnode = acpi_fwnode_handle(adev); pdev = platform_device_register_full(&pinfo); if (IS_ERR(pdev)) { ret = PTR_ERR(pdev); -- cgit v1.2.3 From eb582f668be7aed16a822465677fd74329fa19b6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 4 Mar 2024 20:06:43 +0200 Subject: misc: eeprom_93xx46: Remove unused of_gpio.h of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240304180643.1201319-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/eeprom/eeprom_93xx46.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index b630625b3024..e78a76d74ff4 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 33e165f81d6d57dd09b92930beea86a7b649dca0 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 4 Mar 2024 20:07:37 +0200 Subject: misc: hi6421-spmi-pmic: Remove unused of_gpio.h of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240304180737.1201566-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/hi6421v600-irq.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c index b075d803a2c2..69ee4f39af2a 100644 --- a/drivers/misc/hi6421v600-irq.c +++ b/drivers/misc/hi6421v600-irq.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 3f03dade77f39b299e4b12dafd58329e22023afd Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 4 Mar 2024 20:08:29 +0200 Subject: misc: hisi_hikey_usb: Remove unused of_gpio.h of_gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko Acked-by: John Stultz Link: https://lore.kernel.org/r/20240304180829.1201726-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/hisi_hikey_usb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c index 2165ec35a343..42e12f11ae6e 100644 --- a/drivers/misc/hisi_hikey_usb.c +++ b/drivers/misc/hisi_hikey_usb.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 25f6ef044d08207aa993aded9814e0719fe4289a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:45 +0100 Subject: misc: atmel-ssc: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Nicolas Ferre Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/45719fc31bb893bb9ab1450057e9cb7f399e9ee2.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/atmel-ssc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index ee590c4a1537..6eac0f335915 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -251,7 +251,7 @@ static int ssc_probe(struct platform_device *pdev) return 0; } -static int ssc_remove(struct platform_device *pdev) +static void ssc_remove(struct platform_device *pdev) { struct ssc_device *ssc = platform_get_drvdata(pdev); @@ -260,8 +260,6 @@ static int ssc_remove(struct platform_device *pdev) mutex_lock(&user_lock); list_del(&ssc->list); mutex_unlock(&user_lock); - - return 0; } static struct platform_driver ssc_driver = { @@ -271,7 +269,7 @@ static struct platform_driver ssc_driver = { }, .id_table = atmel_ssc_devtypes, .probe = ssc_probe, - .remove = ssc_remove, + .remove_new = ssc_remove, }; module_platform_driver(ssc_driver); -- cgit v1.2.3 From 3d293acfa88c97f4ea61b29c930214a2279d4b5c Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:46 +0100 Subject: cxl: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Andrew Donnellan Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/add08320eef9ea20ceca78648370590a4bd447b0.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cxl/of.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/cxl/of.c b/drivers/misc/cxl/of.c index 25ce725035e7..bcc005dff1c0 100644 --- a/drivers/misc/cxl/of.c +++ b/drivers/misc/cxl/of.c @@ -431,7 +431,7 @@ int cxl_of_read_adapter_properties(struct cxl *adapter, struct device_node *np) return 0; } -static int cxl_of_remove(struct platform_device *pdev) +static void cxl_of_remove(struct platform_device *pdev) { struct cxl *adapter; int afu; @@ -441,7 +441,6 @@ static int cxl_of_remove(struct platform_device *pdev) cxl_guest_remove_afu(adapter->afu[afu]); cxl_guest_remove_adapter(adapter); - return 0; } static void cxl_of_shutdown(struct platform_device *pdev) @@ -501,6 +500,6 @@ struct platform_driver cxl_of_driver = { .owner = THIS_MODULE }, .probe = cxl_of_probe, - .remove = cxl_of_remove, + .remove_new = cxl_of_remove, .shutdown = cxl_of_shutdown, }; -- cgit v1.2.3 From 0f841590fefb1a05519446143a64ea5e83428819 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:47 +0100 Subject: misc: fastrpc: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/d138bc7f6ec39038d2b5a23478fc036a41988bde.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/fastrpc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c index 03319a1fa97f..0bfff1d42da2 100644 --- a/drivers/misc/fastrpc.c +++ b/drivers/misc/fastrpc.c @@ -2183,7 +2183,7 @@ static int fastrpc_cb_probe(struct platform_device *pdev) return 0; } -static int fastrpc_cb_remove(struct platform_device *pdev) +static void fastrpc_cb_remove(struct platform_device *pdev) { struct fastrpc_channel_ctx *cctx = dev_get_drvdata(pdev->dev.parent); struct fastrpc_session_ctx *sess = dev_get_drvdata(&pdev->dev); @@ -2198,8 +2198,6 @@ static int fastrpc_cb_remove(struct platform_device *pdev) } } spin_unlock_irqrestore(&cctx->lock, flags); - - return 0; } static const struct of_device_id fastrpc_match_table[] = { @@ -2209,7 +2207,7 @@ static const struct of_device_id fastrpc_match_table[] = { static struct platform_driver fastrpc_cb_driver = { .probe = fastrpc_cb_probe, - .remove = fastrpc_cb_remove, + .remove_new = fastrpc_cb_remove, .driver = { .name = "qcom,fastrpc-cb", .of_match_table = fastrpc_match_table, -- cgit v1.2.3 From 09ed594ee3f85c9bd6bd2b96e781d5103167ecb3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:48 +0100 Subject: misc: hisi_hikey_usb: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: John Stultz Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/8775e9573fec55c5fc04151800829e9aeafc5dda.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/hisi_hikey_usb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/hisi_hikey_usb.c b/drivers/misc/hisi_hikey_usb.c index 42e12f11ae6e..fb9be37057a8 100644 --- a/drivers/misc/hisi_hikey_usb.c +++ b/drivers/misc/hisi_hikey_usb.c @@ -238,7 +238,7 @@ static int hisi_hikey_usb_probe(struct platform_device *pdev) return 0; } -static int hisi_hikey_usb_remove(struct platform_device *pdev) +static void hisi_hikey_usb_remove(struct platform_device *pdev) { struct hisi_hikey_usb *hisi_hikey_usb = platform_get_drvdata(pdev); @@ -250,8 +250,6 @@ static int hisi_hikey_usb_remove(struct platform_device *pdev) } else { hub_power_ctrl(hisi_hikey_usb, HUB_VBUS_POWER_OFF); } - - return 0; } static const struct of_device_id id_table_hisi_hikey_usb[] = { @@ -262,7 +260,7 @@ MODULE_DEVICE_TABLE(of, id_table_hisi_hikey_usb); static struct platform_driver hisi_hikey_usb_driver = { .probe = hisi_hikey_usb_probe, - .remove = hisi_hikey_usb_remove, + .remove_new = hisi_hikey_usb_remove, .driver = { .name = DEVICE_DRIVER_NAME, .of_match_table = id_table_hisi_hikey_usb, -- cgit v1.2.3 From 469b832d44f3db7f873d6739a85f26c41681f697 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:49 +0100 Subject: mei: vsc: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/8e14f0b1cea107e613fa0075b3379a9f1e7ef63f.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/platform-vsc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/platform-vsc.c b/drivers/misc/mei/platform-vsc.c index 8d303c6c0000..6c9f00bcb94b 100644 --- a/drivers/misc/mei/platform-vsc.c +++ b/drivers/misc/mei/platform-vsc.c @@ -384,7 +384,7 @@ err_cancel: return ret; } -static int mei_vsc_remove(struct platform_device *pdev) +static void mei_vsc_remove(struct platform_device *pdev) { struct mei_device *mei_dev = platform_get_drvdata(pdev); @@ -395,8 +395,6 @@ static int mei_vsc_remove(struct platform_device *pdev) mei_disable_interrupts(mei_dev); mei_deregister(mei_dev); - - return 0; } static int mei_vsc_suspend(struct device *dev) @@ -433,7 +431,7 @@ MODULE_DEVICE_TABLE(platform, mei_vsc_id_table); static struct platform_driver mei_vsc_drv = { .probe = mei_vsc_probe, - .remove = mei_vsc_remove, + .remove_new = mei_vsc_remove, .id_table = mei_vsc_id_table, .driver = { .name = MEI_VSC_DRV_NAME, -- cgit v1.2.3 From 3aa42cb81108911617d44270bc278fcd7aa72519 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:50 +0100 Subject: misc: open-dice: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/8e7179794ffbcaa4ad3d0db50cc4aa03f377fc8c.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/open-dice.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/open-dice.c b/drivers/misc/open-dice.c index d279a4f195e2..1e3eb2aa44d9 100644 --- a/drivers/misc/open-dice.c +++ b/drivers/misc/open-dice.c @@ -165,12 +165,11 @@ static int __init open_dice_probe(struct platform_device *pdev) return 0; } -static int open_dice_remove(struct platform_device *pdev) +static void open_dice_remove(struct platform_device *pdev) { struct open_dice_drvdata *drvdata = platform_get_drvdata(pdev); misc_deregister(&drvdata->misc); - return 0; } static const struct of_device_id open_dice_of_match[] = { @@ -179,7 +178,7 @@ static const struct of_device_id open_dice_of_match[] = { }; static struct platform_driver open_dice_driver = { - .remove = open_dice_remove, + .remove_new = open_dice_remove, .driver = { .name = DRIVER_NAME, .of_match_table = open_dice_of_match, -- cgit v1.2.3 From 74b32514f088e50b4d90e702a4e039bfefbcc5a2 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:51 +0100 Subject: misc: sram: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/946ebc33a01bf700171257cd219fbe8626bc0c99.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/sram.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c index e248c0a8882f..546eb06a40d0 100644 --- a/drivers/misc/sram.c +++ b/drivers/misc/sram.c @@ -435,7 +435,7 @@ err_free_partitions: return ret; } -static int sram_remove(struct platform_device *pdev) +static void sram_remove(struct platform_device *pdev) { struct sram_dev *sram = platform_get_drvdata(pdev); @@ -443,8 +443,6 @@ static int sram_remove(struct platform_device *pdev) if (sram->pool && gen_pool_avail(sram->pool) < gen_pool_size(sram->pool)) dev_err(sram->dev, "removed while SRAM allocated\n"); - - return 0; } static struct platform_driver sram_driver = { @@ -453,7 +451,7 @@ static struct platform_driver sram_driver = { .of_match_table = sram_dt_ids, }, .probe = sram_probe, - .remove = sram_remove, + .remove_new = sram_remove, }; static int __init sram_init(void) -- cgit v1.2.3 From f1a70d68e5fe61bc70637ccf4cfe9eb48d2e361a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:52 +0100 Subject: misc: ti-st: st_kim: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/250337c967bdb5019a3c9fe8e0d082cd65400227.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ti-st/st_kim.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 4b1be0bb6ac0..47ebe80bf849 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -774,7 +774,7 @@ err_core_init: return err; } -static int kim_remove(struct platform_device *pdev) +static void kim_remove(struct platform_device *pdev) { /* free the GPIOs requested */ struct ti_st_plat_data *pdata = pdev->dev.platform_data; @@ -798,7 +798,6 @@ static int kim_remove(struct platform_device *pdev) kfree(kim_gdata); kim_gdata = NULL; - return 0; } static int kim_suspend(struct platform_device *pdev, pm_message_t state) @@ -825,7 +824,7 @@ static int kim_resume(struct platform_device *pdev) /* entry point for ST KIM module, called in from ST Core */ static struct platform_driver kim_platform_driver = { .probe = kim_probe, - .remove = kim_remove, + .remove_new = kim_remove, .suspend = kim_suspend, .resume = kim_resume, .driver = { -- cgit v1.2.3 From be7e1a4c47745421af416e6cd8da9f286ae6af41 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:53 +0100 Subject: misc: vcpu_stall_detector: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/4b964bd133f5af11cabd51a4d8ed95025583eb93.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/vcpu_stall_detector.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/vcpu_stall_detector.c b/drivers/misc/vcpu_stall_detector.c index 6479c962da1a..e2015c87f03f 100644 --- a/drivers/misc/vcpu_stall_detector.c +++ b/drivers/misc/vcpu_stall_detector.c @@ -187,7 +187,7 @@ err: return ret; } -static int vcpu_stall_detect_remove(struct platform_device *pdev) +static void vcpu_stall_detect_remove(struct platform_device *pdev) { int cpu; @@ -195,8 +195,6 @@ static int vcpu_stall_detect_remove(struct platform_device *pdev) for_each_possible_cpu(cpu) stop_stall_detector_cpu(cpu); - - return 0; } static const struct of_device_id vcpu_stall_detect_of_match[] = { @@ -208,7 +206,7 @@ MODULE_DEVICE_TABLE(of, vcpu_stall_detect_of_match); static struct platform_driver vcpu_stall_detect_driver = { .probe = vcpu_stall_detect_probe, - .remove = vcpu_stall_detect_remove, + .remove_new = vcpu_stall_detect_remove, .driver = { .name = KBUILD_MODNAME, .of_match_table = vcpu_stall_detect_of_match, -- cgit v1.2.3 From 2743e96f8882d7d9772e2112db9114048cceac4a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:54 +0100 Subject: misc: xilinx_sdfec: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/705b89c3cd7c0a42ce3f482f202204f5e3377aa2.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/xilinx_sdfec.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c index 94a0ee19bf20..ea433695f4c4 100644 --- a/drivers/misc/xilinx_sdfec.c +++ b/drivers/misc/xilinx_sdfec.c @@ -1420,7 +1420,7 @@ err_xsdfec_dev: return err; } -static int xsdfec_remove(struct platform_device *pdev) +static void xsdfec_remove(struct platform_device *pdev) { struct xsdfec_dev *xsdfec; @@ -1428,7 +1428,6 @@ static int xsdfec_remove(struct platform_device *pdev) misc_deregister(&xsdfec->miscdev); ida_free(&dev_nrs, xsdfec->dev_id); xsdfec_disable_all_clks(&xsdfec->clks); - return 0; } static const struct of_device_id xsdfec_of_match[] = { @@ -1445,7 +1444,7 @@ static struct platform_driver xsdfec_driver = { .of_match_table = xsdfec_of_match, }, .probe = xsdfec_probe, - .remove = xsdfec_remove, + .remove_new = xsdfec_remove, }; module_platform_driver(xsdfec_driver); -- cgit v1.2.3 From 37efe116bea197c17cdae0861e0004ca70f10d5c Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 Feb 2024 10:53:55 +0100 Subject: misc: xilinx_tmr_inject: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/198112757eac0fc004677a4757ce48ae7c7194ab.1708508896.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/misc/xilinx_tmr_inject.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/xilinx_tmr_inject.c b/drivers/misc/xilinx_tmr_inject.c index 9fc5835bfebc..73c6da7d0963 100644 --- a/drivers/misc/xilinx_tmr_inject.c +++ b/drivers/misc/xilinx_tmr_inject.c @@ -143,11 +143,10 @@ static int xtmr_inject_probe(struct platform_device *pdev) return 0; } -static int xtmr_inject_remove(struct platform_device *pdev) +static void xtmr_inject_remove(struct platform_device *pdev) { debugfs_remove_recursive(dbgfs_root); dbgfs_root = NULL; - return 0; } static const struct of_device_id xtmr_inject_of_match[] = { @@ -164,7 +163,7 @@ static struct platform_driver xtmr_inject_driver = { .of_match_table = xtmr_inject_of_match, }, .probe = xtmr_inject_probe, - .remove = xtmr_inject_remove, + .remove_new = xtmr_inject_remove, }; module_platform_driver(xtmr_inject_driver); MODULE_AUTHOR("Advanced Micro Devices, Inc"); -- cgit v1.2.3 From 00b9850e7307ff690639dd0584a50dd8a72d3548 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 5 Jan 2024 11:16:17 +0100 Subject: greybus: make greybus_bus_type const Now that the driver core can properly handle constant struct bus_type, move the greybus_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Alex Elder Cc: greybus-dev@lists.linaro.org Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/2024010517-handgun-scoreless-05e7@gregkh Signed-off-by: Greg Kroah-Hartman --- drivers/greybus/core.c | 2 +- include/linux/greybus.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/greybus/core.c b/drivers/greybus/core.c index 5714be740470..b0aadc1e7bbe 100644 --- a/drivers/greybus/core.c +++ b/drivers/greybus/core.c @@ -155,7 +155,7 @@ static void greybus_shutdown(struct device *dev) } } -struct bus_type greybus_bus_type = { +const struct bus_type greybus_bus_type = { .name = "greybus", .match = greybus_match_device, .uevent = greybus_uevent, diff --git a/include/linux/greybus.h b/include/linux/greybus.h index 18c0fb958b74..92da9ec4f5f0 100644 --- a/include/linux/greybus.h +++ b/include/linux/greybus.h @@ -104,7 +104,7 @@ void gb_debugfs_init(void); void gb_debugfs_cleanup(void); struct dentry *gb_debugfs_get(void); -extern struct bus_type greybus_bus_type; +extern const struct bus_type greybus_bus_type; extern struct device_type greybus_hd_type; extern struct device_type greybus_module_type; -- cgit v1.2.3 From e869b72b33731063b50433eb6146d51a479995a1 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Mon, 19 Feb 2024 09:40:50 -0300 Subject: greybus: constify the struct device_type usage Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the greybus_hd_type, greybus_module_type, greybus_interface_type, greybus_control_type, greybus_bundle_type and greybus_svc_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Signed-off-by: "Ricardo B. Marliere" Reviewed-by: Alex Elder Link: https://lore.kernel.org/r/20240219-device_cleanup-greybus-v1-1-babb3f65e8cc@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/greybus/bundle.c | 2 +- drivers/greybus/control.c | 2 +- drivers/greybus/hd.c | 2 +- drivers/greybus/interface.c | 2 +- drivers/greybus/module.c | 2 +- drivers/greybus/svc.c | 2 +- include/linux/greybus.h | 12 ++++++------ 7 files changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/greybus/bundle.c b/drivers/greybus/bundle.c index 84660729538b..a6e1cca06172 100644 --- a/drivers/greybus/bundle.c +++ b/drivers/greybus/bundle.c @@ -166,7 +166,7 @@ static const struct dev_pm_ops gb_bundle_pm_ops = { SET_RUNTIME_PM_OPS(gb_bundle_suspend, gb_bundle_resume, gb_bundle_idle) }; -struct device_type greybus_bundle_type = { +const struct device_type greybus_bundle_type = { .name = "greybus_bundle", .release = gb_bundle_release, .pm = &gb_bundle_pm_ops, diff --git a/drivers/greybus/control.c b/drivers/greybus/control.c index 359a25841973..b5cf49d09df2 100644 --- a/drivers/greybus/control.c +++ b/drivers/greybus/control.c @@ -436,7 +436,7 @@ static void gb_control_release(struct device *dev) kfree(control); } -struct device_type greybus_control_type = { +const struct device_type greybus_control_type = { .name = "greybus_control", .release = gb_control_release, }; diff --git a/drivers/greybus/hd.c b/drivers/greybus/hd.c index 72b21bf2d7d3..e2f3496bddc3 100644 --- a/drivers/greybus/hd.c +++ b/drivers/greybus/hd.c @@ -116,7 +116,7 @@ static void gb_hd_release(struct device *dev) kfree(hd); } -struct device_type greybus_hd_type = { +const struct device_type greybus_hd_type = { .name = "greybus_host_device", .release = gb_hd_release, }; diff --git a/drivers/greybus/interface.c b/drivers/greybus/interface.c index 9ec949a438ef..a88dc701289c 100644 --- a/drivers/greybus/interface.c +++ b/drivers/greybus/interface.c @@ -765,7 +765,7 @@ static const struct dev_pm_ops gb_interface_pm_ops = { gb_interface_runtime_idle) }; -struct device_type greybus_interface_type = { +const struct device_type greybus_interface_type = { .name = "greybus_interface", .release = gb_interface_release, .pm = &gb_interface_pm_ops, diff --git a/drivers/greybus/module.c b/drivers/greybus/module.c index 36f77f9e1d74..7f7153a1dd60 100644 --- a/drivers/greybus/module.c +++ b/drivers/greybus/module.c @@ -81,7 +81,7 @@ static void gb_module_release(struct device *dev) kfree(module); } -struct device_type greybus_module_type = { +const struct device_type greybus_module_type = { .name = "greybus_module", .release = gb_module_release, }; diff --git a/drivers/greybus/svc.c b/drivers/greybus/svc.c index 0d7e749174a4..4256467fcd35 100644 --- a/drivers/greybus/svc.c +++ b/drivers/greybus/svc.c @@ -1305,7 +1305,7 @@ static void gb_svc_release(struct device *dev) kfree(svc); } -struct device_type greybus_svc_type = { +const struct device_type greybus_svc_type = { .name = "greybus_svc", .release = gb_svc_release, }; diff --git a/include/linux/greybus.h b/include/linux/greybus.h index 92da9ec4f5f0..2cc570ea63bf 100644 --- a/include/linux/greybus.h +++ b/include/linux/greybus.h @@ -106,12 +106,12 @@ struct dentry *gb_debugfs_get(void); extern const struct bus_type greybus_bus_type; -extern struct device_type greybus_hd_type; -extern struct device_type greybus_module_type; -extern struct device_type greybus_interface_type; -extern struct device_type greybus_control_type; -extern struct device_type greybus_bundle_type; -extern struct device_type greybus_svc_type; +extern const struct device_type greybus_hd_type; +extern const struct device_type greybus_module_type; +extern const struct device_type greybus_interface_type; +extern const struct device_type greybus_control_type; +extern const struct device_type greybus_bundle_type; +extern const struct device_type greybus_svc_type; static inline int is_gb_host_device(const struct device *dev) { -- cgit v1.2.3 From cbd38332c140829ab752ba4e727f98be5c257f18 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Sat, 24 Feb 2024 11:40:23 +0000 Subject: nvmem: meson-efuse: fix function pointer type mismatch clang-16 warns about casting functions to incompatible types, as is done here to call clk_disable_unprepare: drivers/nvmem/meson-efuse.c:78:12: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 78 | (void(*)(void *))clk_disable_unprepare, The pattern of getting, enabling and setting a disable callback for a clock can be replaced with devm_clk_get_enabled(), which also fixes this warning. Fixes: 611fbca1c861 ("nvmem: meson-efuse: add peripheral clock") Cc: Stable@vger.kernel.org Reported-by: Arnd Bergmann Signed-off-by: Jerome Brunet Reviewed-by: Martin Blumenstingl Acked-by: Arnd Bergmann Reviewed-by: Justin Stitt Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114023.85535-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/meson-efuse.c | 25 +++---------------------- 1 file changed, 3 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c index b922df99f9bc..33678d0af2c2 100644 --- a/drivers/nvmem/meson-efuse.c +++ b/drivers/nvmem/meson-efuse.c @@ -47,7 +47,6 @@ static int meson_efuse_probe(struct platform_device *pdev) struct nvmem_config *econfig; struct clk *clk; unsigned int size; - int ret; sm_np = of_parse_phandle(pdev->dev.of_node, "secure-monitor", 0); if (!sm_np) { @@ -60,27 +59,9 @@ static int meson_efuse_probe(struct platform_device *pdev) if (!fw) return -EPROBE_DEFER; - clk = devm_clk_get(dev, NULL); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to get efuse gate"); - return ret; - } - - ret = clk_prepare_enable(clk); - if (ret) { - dev_err(dev, "failed to enable gate"); - return ret; - } - - ret = devm_add_action_or_reset(dev, - (void(*)(void *))clk_disable_unprepare, - clk); - if (ret) { - dev_err(dev, "failed to add disable callback"); - return ret; - } + clk = devm_clk_get_enabled(dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), "failed to get efuse gate"); if (meson_sm_call(fw, SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) { dev_err(dev, "failed to get max user"); -- cgit v1.2.3 From 89ffa4cccec54467446f141a79b9e36893079fb8 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 24 Feb 2024 11:41:37 +0000 Subject: slimbus: core: Remove usage of the deprecated ida_simple_xx() API ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_range() is inclusive. So change this change allows one more device. Previously address 0xFE was never used. Fixes: 46a2bb5a7f7e ("slimbus: core: Add slim controllers support") Cc: Stable@vger.kernel.org Signed-off-by: Christophe JAILLET Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114137.85781-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/slimbus/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c index d43873bb5fe6..01cbd4621981 100644 --- a/drivers/slimbus/core.c +++ b/drivers/slimbus/core.c @@ -436,8 +436,8 @@ static int slim_device_alloc_laddr(struct slim_device *sbdev, if (ret < 0) goto err; } else if (report_present) { - ret = ida_simple_get(&ctrl->laddr_ida, - 0, SLIM_LA_MANAGER - 1, GFP_KERNEL); + ret = ida_alloc_max(&ctrl->laddr_ida, + SLIM_LA_MANAGER - 1, GFP_KERNEL); if (ret < 0) goto err; -- cgit v1.2.3 From 56c7659a8b6b8238535124fe78679cda4dba7fbc Mon Sep 17 00:00:00 2001 From: Jeff Johnson Date: Sat, 24 Feb 2024 11:44:02 +0000 Subject: slimbus: qcom-ngd-ctrl: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for qcom-ngd-ctrl.c. Signed-off-by: Jeff Johnson Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114403.86230-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/slimbus/qcom-ngd-ctrl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c index 77aa6d26476c..efeba8275a66 100644 --- a/drivers/slimbus/qcom-ngd-ctrl.c +++ b/drivers/slimbus/qcom-ngd-ctrl.c @@ -220,7 +220,7 @@ struct slimbus_power_resp_msg_v01 { struct qmi_response_type_v01 resp; }; -static struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = { { .data_type = QMI_UNSIGNED_4_BYTE, .elem_len = 1, @@ -262,7 +262,7 @@ static struct qmi_elem_info slimbus_select_inst_req_msg_v01_ei[] = { }, }; -static struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = { { .data_type = QMI_STRUCT, .elem_len = 1, @@ -284,7 +284,7 @@ static struct qmi_elem_info slimbus_select_inst_resp_msg_v01_ei[] = { }, }; -static struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = { { .data_type = QMI_UNSIGNED_4_BYTE, .elem_len = 1, @@ -324,7 +324,7 @@ static struct qmi_elem_info slimbus_power_req_msg_v01_ei[] = { }, }; -static struct qmi_elem_info slimbus_power_resp_msg_v01_ei[] = { +static const struct qmi_elem_info slimbus_power_resp_msg_v01_ei[] = { { .data_type = QMI_STRUCT, .elem_len = 1, -- cgit v1.2.3 From ab23f1bffcf690ffae2b0c4bb8b09420299be05c Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Sat, 24 Feb 2024 11:44:03 +0000 Subject: slimbus: core: make slimbus_bus const Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the slimbus_bus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Reviewed-by: Greg Kroah-Hartman Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114403.86230-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/slimbus/core.c | 2 +- include/linux/slimbus.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c index 01cbd4621981..41e62de1f91f 100644 --- a/drivers/slimbus/core.c +++ b/drivers/slimbus/core.c @@ -100,7 +100,7 @@ static int slim_device_uevent(const struct device *dev, struct kobj_uevent_env * return add_uevent_var(env, "MODALIAS=slim:%s", dev_name(&sbdev->dev)); } -struct bus_type slimbus_bus = { +const struct bus_type slimbus_bus = { .name = "slimbus", .match = slim_device_match, .probe = slim_device_probe, diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h index 12c9719b2a55..3042385b7b40 100644 --- a/include/linux/slimbus.h +++ b/include/linux/slimbus.h @@ -10,7 +10,7 @@ #include #include -extern struct bus_type slimbus_bus; +extern const struct bus_type slimbus_bus; /** * struct slim_eaddr - Enumeration address for a SLIMbus device -- cgit v1.2.3 From 998f0633773b3432829fe45d2cd2ffb842f3c78e Mon Sep 17 00:00:00 2001 From: William-tw Lin Date: Sat, 24 Feb 2024 11:45:07 +0000 Subject: nvmem: mtk-efuse: Register MediaTek socinfo driver from efuse The socinfo driver reads chip information from eFuses and does not need any devicetree node. Register it from mtk-efuse. While at it, also add the name for this driver's nvmem_config. Signed-off-by: William-tw Lin Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114516.86365-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/mtk-efuse.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c index 84f05b40a411..f5bebcecf9bd 100644 --- a/drivers/nvmem/mtk-efuse.c +++ b/drivers/nvmem/mtk-efuse.c @@ -68,6 +68,7 @@ static int mtk_efuse_probe(struct platform_device *pdev) struct nvmem_config econfig = {}; struct mtk_efuse_priv *priv; const struct mtk_efuse_pdata *pdata; + struct platform_device *socinfo; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -85,11 +86,20 @@ static int mtk_efuse_probe(struct platform_device *pdev) econfig.size = resource_size(res); econfig.priv = priv; econfig.dev = dev; + econfig.name = "mtk-efuse"; if (pdata->uses_post_processing) econfig.fixup_dt_cell_info = &mtk_efuse_fixup_dt_cell_info; nvmem = devm_nvmem_register(dev, &econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); - return PTR_ERR_OR_ZERO(nvmem); + socinfo = platform_device_register_data(&pdev->dev, "mtk-socinfo", + PLATFORM_DEVID_AUTO, NULL, 0); + if (IS_ERR(socinfo)) + dev_info(dev, "MediaTek SoC Information will be unavailable\n"); + + platform_set_drvdata(pdev, socinfo); + return 0; } static const struct mtk_efuse_pdata mtk_mt8186_efuse_pdata = { @@ -108,8 +118,17 @@ static const struct of_device_id mtk_efuse_of_match[] = { }; MODULE_DEVICE_TABLE(of, mtk_efuse_of_match); +static void mtk_efuse_remove(struct platform_device *pdev) +{ + struct platform_device *socinfo = platform_get_drvdata(pdev); + + if (!IS_ERR_OR_NULL(socinfo)) + platform_device_unregister(socinfo); +} + static struct platform_driver mtk_efuse_driver = { .probe = mtk_efuse_probe, + .remove_new = mtk_efuse_remove, .driver = { .name = "mediatek,efuse", .of_match_table = mtk_efuse_of_match, -- cgit v1.2.3 From e34b943068d30f20db31f28100affdaaedc7efab Mon Sep 17 00:00:00 2001 From: Praveen Teja Kundanala Date: Sat, 24 Feb 2024 11:45:10 +0000 Subject: firmware: xilinx: Add ZynqMP efuse access API Add zynqmp_pm_efuse_access API in the ZynqMP firmware for read/write access of efuse memory. Signed-off-by: Praveen Teja Kundanala Acked-by: Michal Simek Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114516.86365-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/xilinx/zynqmp.c | 25 +++++++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 8 ++++++++ 2 files changed, 33 insertions(+) (limited to 'drivers') diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index 79789f0563f6..9bc45357e1a8 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -3,6 +3,7 @@ * Xilinx Zynq MPSoC Firmware layer * * Copyright (C) 2014-2022 Xilinx, Inc. + * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc. * * Michal Simek * Davorin Mista @@ -1384,6 +1385,30 @@ int zynqmp_pm_aes_engine(const u64 address, u32 *out) } EXPORT_SYMBOL_GPL(zynqmp_pm_aes_engine); +/** + * zynqmp_pm_efuse_access - Provides access to efuse memory. + * @address: Address of the efuse params structure + * @out: Returned output value + * + * Return: Returns status, either success or error code. + */ +int zynqmp_pm_efuse_access(const u64 address, u32 *out) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + if (!out) + return -EINVAL; + + ret = zynqmp_pm_invoke_fn(PM_EFUSE_ACCESS, ret_payload, 2, + upper_32_bits(address), + lower_32_bits(address)); + *out = ret_payload[1]; + + return ret; +} +EXPORT_SYMBOL_GPL(zynqmp_pm_efuse_access); + /** * zynqmp_pm_sha_hash - Access the SHA engine to calculate the hash * @address: Address of the data/ Address of output buffer where diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 9a7e52739251..1a069a56c961 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -3,6 +3,7 @@ * Xilinx Zynq MPSoC Firmware layer * * Copyright (C) 2014-2021 Xilinx + * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc. * * Michal Simek * Davorin Mista @@ -171,6 +172,7 @@ enum pm_api_id { PM_CLOCK_GETPARENT = 44, PM_FPGA_READ = 46, PM_SECURE_AES = 47, + PM_EFUSE_ACCESS = 53, PM_FEATURE_CHECK = 63, }; @@ -562,6 +564,7 @@ int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities, const u32 qos, const enum zynqmp_pm_request_ack ack); int zynqmp_pm_aes_engine(const u64 address, u32 *out); +int zynqmp_pm_efuse_access(const u64 address, u32 *out); int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags); int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags); int zynqmp_pm_fpga_get_status(u32 *value); @@ -749,6 +752,11 @@ static inline int zynqmp_pm_aes_engine(const u64 address, u32 *out) return -ENODEV; } +static inline int zynqmp_pm_efuse_access(const u64 address, u32 *out) +{ + return -ENODEV; +} + static inline int zynqmp_pm_sha_hash(const u64 address, const u32 size, const u32 flags) { -- cgit v1.2.3 From 29be47fcd6a06ea2e79eeeca6e69ad1e23254a69 Mon Sep 17 00:00:00 2001 From: Praveen Teja Kundanala Date: Sat, 24 Feb 2024 11:45:11 +0000 Subject: nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup - Remove static nvmem_config declaration - Remove zynqmp_nvmem_data Signed-off-by: Praveen Teja Kundanala Acked-by: Kalyani Akula Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114516.86365-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/zynqmp_nvmem.c | 37 ++++++++++++------------------------- 1 file changed, 12 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c index 7f15aa89a9d0..391d8e88b270 100644 --- a/drivers/nvmem/zynqmp_nvmem.c +++ b/drivers/nvmem/zynqmp_nvmem.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2019 Xilinx, Inc. + * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc. */ #include @@ -11,36 +12,25 @@ #define SILICON_REVISION_MASK 0xF -struct zynqmp_nvmem_data { - struct device *dev; - struct nvmem_device *nvmem; -}; static int zynqmp_nvmem_read(void *context, unsigned int offset, void *val, size_t bytes) { + struct device *dev = context; int ret; - int idcode, version; - struct zynqmp_nvmem_data *priv = context; + int idcode; + int version; ret = zynqmp_pm_get_chipid(&idcode, &version); if (ret < 0) return ret; - dev_dbg(priv->dev, "Read chipid val %x %x\n", idcode, version); + dev_dbg(dev, "Read chipid val %x %x\n", idcode, version); *(int *)val = version & SILICON_REVISION_MASK; return 0; } -static struct nvmem_config econfig = { - .name = "zynqmp-nvmem", - .owner = THIS_MODULE, - .word_size = 1, - .size = 1, - .read_only = true, -}; - static const struct of_device_id zynqmp_nvmem_match[] = { { .compatible = "xlnx,zynqmp-nvmem-fw", }, { /* sentinel */ }, @@ -50,21 +40,18 @@ MODULE_DEVICE_TABLE(of, zynqmp_nvmem_match); static int zynqmp_nvmem_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct zynqmp_nvmem_data *priv; + struct nvmem_config econfig = {}; - priv = devm_kzalloc(dev, sizeof(struct zynqmp_nvmem_data), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->dev = dev; + econfig.name = "zynqmp-nvmem"; + econfig.owner = THIS_MODULE; + econfig.word_size = 1; + econfig.size = 1; econfig.dev = dev; econfig.add_legacy_fixed_of_cells = true; + econfig.read_only = true; econfig.reg_read = zynqmp_nvmem_read; - econfig.priv = priv; - - priv->nvmem = devm_nvmem_register(dev, &econfig); - return PTR_ERR_OR_ZERO(priv->nvmem); + return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &econfig)); } static struct platform_driver zynqmp_nvmem_driver = { -- cgit v1.2.3 From 737c0c8d07b5f671c0a33cec95965fcb2d2ea893 Mon Sep 17 00:00:00 2001 From: Praveen Teja Kundanala Date: Sat, 24 Feb 2024 11:45:12 +0000 Subject: nvmem: zynqmp_nvmem: Add support to access efuse Add support to read/write efuse memory map of ZynqMP. Below are the offsets of ZynqMP efuse memory map 0 - SOC version(read only) 0xC - 0xFC -ZynqMP specific purpose efuses 0x100 - 0x17F - Physical Unclonable Function(PUF) efuses repurposed as user efuses Signed-off-by: Praveen Teja Kundanala Acked-by: Kalyani Akula Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114516.86365-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/zynqmp_nvmem.c | 186 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 176 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c index 391d8e88b270..8682adaacd69 100644 --- a/drivers/nvmem/zynqmp_nvmem.c +++ b/drivers/nvmem/zynqmp_nvmem.c @@ -4,6 +4,7 @@ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc. */ +#include #include #include #include @@ -11,24 +12,189 @@ #include #define SILICON_REVISION_MASK 0xF +#define P_USER_0_64_UPPER_MASK GENMASK(31, 16) +#define P_USER_127_LOWER_4_BIT_MASK GENMASK(3, 0) +#define WORD_INBYTES 4 +#define SOC_VER_SIZE 0x4 +#define EFUSE_MEMORY_SIZE 0x177 +#define UNUSED_SPACE 0x8 +#define ZYNQMP_NVMEM_SIZE (SOC_VER_SIZE + UNUSED_SPACE + \ + EFUSE_MEMORY_SIZE) +#define SOC_VERSION_OFFSET 0x0 +#define EFUSE_START_OFFSET 0xC +#define EFUSE_END_OFFSET 0xFC +#define EFUSE_PUF_START_OFFSET 0x100 +#define EFUSE_PUF_MID_OFFSET 0x140 +#define EFUSE_PUF_END_OFFSET 0x17F +#define EFUSE_NOT_ENABLED 29 +/* + * efuse access type + */ +enum efuse_access { + EFUSE_READ = 0, + EFUSE_WRITE +}; + +/** + * struct xilinx_efuse - the basic structure + * @src: address of the buffer to store the data to be write/read + * @size: read/write word count + * @offset: read/write offset + * @flag: 0 - represents efuse read and 1- represents efuse write + * @pufuserfuse:0 - represents non-puf efuses, offset is used for read/write + * 1 - represents puf user fuse row number. + * + * this structure stores all the required details to + * read/write efuse memory. + */ +struct xilinx_efuse { + u64 src; + u32 size; + u32 offset; + enum efuse_access flag; + u32 pufuserfuse; +}; + +static int zynqmp_efuse_access(void *context, unsigned int offset, + void *val, size_t bytes, enum efuse_access flag, + unsigned int pufflag) +{ + struct device *dev = context; + struct xilinx_efuse *efuse; + dma_addr_t dma_addr; + dma_addr_t dma_buf; + size_t words = bytes / WORD_INBYTES; + int ret; + int value; + char *data; + + if (bytes % WORD_INBYTES != 0) { + dev_err(dev, "Bytes requested should be word aligned\n"); + return -EOPNOTSUPP; + } + + if (pufflag == 0 && offset % WORD_INBYTES) { + dev_err(dev, "Offset requested should be word aligned\n"); + return -EOPNOTSUPP; + } + + if (pufflag == 1 && flag == EFUSE_WRITE) { + memcpy(&value, val, bytes); + if ((offset == EFUSE_PUF_START_OFFSET || + offset == EFUSE_PUF_MID_OFFSET) && + value & P_USER_0_64_UPPER_MASK) { + dev_err(dev, "Only lower 4 bytes are allowed to be programmed in P_USER_0 & P_USER_64\n"); + return -EOPNOTSUPP; + } + + if (offset == EFUSE_PUF_END_OFFSET && + (value & P_USER_127_LOWER_4_BIT_MASK)) { + dev_err(dev, "Only MSB 28 bits are allowed to be programmed for P_USER_127\n"); + return -EOPNOTSUPP; + } + } + + efuse = dma_alloc_coherent(dev, sizeof(struct xilinx_efuse), + &dma_addr, GFP_KERNEL); + if (!efuse) + return -ENOMEM; -static int zynqmp_nvmem_read(void *context, unsigned int offset, - void *val, size_t bytes) + data = dma_alloc_coherent(dev, sizeof(bytes), + &dma_buf, GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto efuse_data_fail; + } + + if (flag == EFUSE_WRITE) { + memcpy(data, val, bytes); + efuse->flag = EFUSE_WRITE; + } else { + efuse->flag = EFUSE_READ; + } + + efuse->src = dma_buf; + efuse->size = words; + efuse->offset = offset; + efuse->pufuserfuse = pufflag; + + zynqmp_pm_efuse_access(dma_addr, (u32 *)&ret); + if (ret != 0) { + if (ret == EFUSE_NOT_ENABLED) { + dev_err(dev, "efuse access is not enabled\n"); + ret = -EOPNOTSUPP; + } else { + dev_err(dev, "Error in efuse read %x\n", ret); + ret = -EPERM; + } + goto efuse_access_err; + } + + if (flag == EFUSE_READ) + memcpy(val, data, bytes); +efuse_access_err: + dma_free_coherent(dev, sizeof(bytes), + data, dma_buf); +efuse_data_fail: + dma_free_coherent(dev, sizeof(struct xilinx_efuse), + efuse, dma_addr); + + return ret; +} + +static int zynqmp_nvmem_read(void *context, unsigned int offset, void *val, size_t bytes) { struct device *dev = context; int ret; + int pufflag = 0; int idcode; int version; - ret = zynqmp_pm_get_chipid(&idcode, &version); - if (ret < 0) - return ret; + if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET) + pufflag = 1; + + switch (offset) { + /* Soc version offset is zero */ + case SOC_VERSION_OFFSET: + if (bytes != SOC_VER_SIZE) + return -EOPNOTSUPP; + + ret = zynqmp_pm_get_chipid((u32 *)&idcode, (u32 *)&version); + if (ret < 0) + return ret; + + dev_dbg(dev, "Read chipid val %x %x\n", idcode, version); + *(int *)val = version & SILICON_REVISION_MASK; + break; + /* Efuse offset starts from 0xc */ + case EFUSE_START_OFFSET ... EFUSE_END_OFFSET: + case EFUSE_PUF_START_OFFSET ... EFUSE_PUF_END_OFFSET: + ret = zynqmp_efuse_access(context, offset, val, + bytes, EFUSE_READ, pufflag); + break; + default: + *(u32 *)val = 0xDEADBEEF; + ret = 0; + break; + } + + return ret; +} + +static int zynqmp_nvmem_write(void *context, + unsigned int offset, void *val, size_t bytes) +{ + int pufflag = 0; + + if (offset < EFUSE_START_OFFSET || offset > EFUSE_PUF_END_OFFSET) + return -EOPNOTSUPP; - dev_dbg(dev, "Read chipid val %x %x\n", idcode, version); - *(int *)val = version & SILICON_REVISION_MASK; + if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET) + pufflag = 1; - return 0; + return zynqmp_efuse_access(context, offset, + val, bytes, EFUSE_WRITE, pufflag); } static const struct of_device_id zynqmp_nvmem_match[] = { @@ -45,11 +211,11 @@ static int zynqmp_nvmem_probe(struct platform_device *pdev) econfig.name = "zynqmp-nvmem"; econfig.owner = THIS_MODULE; econfig.word_size = 1; - econfig.size = 1; + econfig.size = ZYNQMP_NVMEM_SIZE; econfig.dev = dev; econfig.add_legacy_fixed_of_cells = true; - econfig.read_only = true; econfig.reg_read = zynqmp_nvmem_read; + econfig.reg_write = zynqmp_nvmem_write; return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &econfig)); } -- cgit v1.2.3 From 76c345edef754b16cab81ad9452cc49c09e67066 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 24 Feb 2024 11:45:14 +0000 Subject: nvmem: mtk-efuse: Drop NVMEM device name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MT8183 has not one but two efuse devices. The static name and ID causes the second efuse device to fail to probe, due to duplicate sysfs entries. With the rework of the mtk-socinfo driver, lookup by name is no longer necessary. The custom name can simply be dropped. Signed-off-by: Chen-Yu Tsai Reviewed-by: AngeloGioacchino Del Regno Tested-by: "Nícolas F. R. A. Prado" Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114516.86365-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/mtk-efuse.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c index f5bebcecf9bd..9caf04667341 100644 --- a/drivers/nvmem/mtk-efuse.c +++ b/drivers/nvmem/mtk-efuse.c @@ -86,7 +86,6 @@ static int mtk_efuse_probe(struct platform_device *pdev) econfig.size = resource_size(res); econfig.priv = priv; econfig.dev = dev; - econfig.name = "mtk-efuse"; if (pdata->uses_post_processing) econfig.fixup_dt_cell_info = &mtk_efuse_fixup_dt_cell_info; nvmem = devm_nvmem_register(dev, &econfig); -- cgit v1.2.3 From 8ec0faf2572216b4e25d6829cd41cf3ee2dab979 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Sat, 24 Feb 2024 11:45:15 +0000 Subject: nvmem: core: make nvmem_layout_bus_type const Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type, move the nvmem_layout_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Reviewed-by: Greg Kroah-Hartman Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114516.86365-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/layouts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvmem/layouts.c b/drivers/nvmem/layouts.c index 6a6aa58369ff..8b5e2de138eb 100644 --- a/drivers/nvmem/layouts.c +++ b/drivers/nvmem/layouts.c @@ -45,7 +45,7 @@ static void nvmem_layout_bus_remove(struct device *dev) return drv->remove(layout); } -static struct bus_type nvmem_layout_bus_type = { +static const struct bus_type nvmem_layout_bus_type = { .name = "nvmem-layout", .match = nvmem_layout_bus_match, .probe = nvmem_layout_bus_probe, -- cgit v1.2.3 From def3173d4f17b37cecbd74d7c269a080b0b01598 Mon Sep 17 00:00:00 2001 From: Markus Schneider-Pargmann Date: Sat, 24 Feb 2024 11:45:16 +0000 Subject: nvmem: core: Print error on wrong bits DT property The algorithms in nvmem core are built with the constraint that bit_offset < 8. If bit_offset is greater the results are wrong. Print an error if the devicetree 'bits' property is outside of the valid range and abort parsing. Signed-off-by: Markus Schneider-Pargmann Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240224114516.86365-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index eb357ac2e54a..2c6b99402df8 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -807,6 +807,11 @@ static int nvmem_add_cells_from_dt(struct nvmem_device *nvmem, struct device_nod if (addr && len == (2 * sizeof(u32))) { info.bit_offset = be32_to_cpup(addr++); info.nbits = be32_to_cpup(addr); + if (info.bit_offset >= BITS_PER_BYTE || info.nbits < 1) { + dev_err(dev, "nvmem: invalid bits on %pOF\n", child); + of_node_put(child); + return -EINVAL; + } } info.np = of_node_get(child); -- cgit v1.2.3 From 408b18b1aa1f41f15cbaaf9c43d4500f62d904e1 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Sun, 4 Feb 2024 17:13:16 -0300 Subject: most: core: make mostbus const Now that the driver core can properly handle constant struct bus_type, move the mostbus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20240204-bus_cleanup-most-v1-1-f5cd9a06e13f@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/most/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/most/core.c b/drivers/most/core.c index e4412c7d25b0..f13d0e14a48b 100644 --- a/drivers/most/core.c +++ b/drivers/most/core.c @@ -499,7 +499,7 @@ static int most_match(struct device *dev, struct device_driver *drv) return 1; } -static struct bus_type mostbus = { +static const struct bus_type mostbus = { .name = "most", .match = most_match, }; -- cgit v1.2.3 From c65f52fc475df49ebba4152e1c2927883bf8fd37 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Sun, 4 Feb 2024 17:00:13 -0300 Subject: ipack: make ipack_bus_type const Now that the driver core can properly handle constant struct bus_type, move the ipack_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Acked-by: Vaibhav Gupta Link: https://lore.kernel.org/r/20240204-bus_cleanup-ipack-v1-1-aef5e8f84d01@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/ipack/ipack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ipack/ipack.c b/drivers/ipack/ipack.c index b1471ba016a5..866bf48d803b 100644 --- a/drivers/ipack/ipack.c +++ b/drivers/ipack/ipack.c @@ -187,7 +187,7 @@ static struct attribute *ipack_attrs[] = { }; ATTRIBUTE_GROUPS(ipack); -static struct bus_type ipack_bus_type = { +static const struct bus_type ipack_bus_type = { .name = "ipack", .probe = ipack_bus_probe, .match = ipack_bus_match, -- cgit v1.2.3 From cb1c1224193e648b4108dd06ebb7cc86b5c514ad Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Mon, 12 Feb 2024 08:41:01 -0300 Subject: dio: make dio_bus_type const Now that the driver core can properly handle constant struct bus_type, move the dio_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20240212-bus_cleanup-dio-v2-1-3b1ba4c0547d@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/dio/dio-driver.c | 2 +- include/linux/dio.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dio/dio-driver.c b/drivers/dio/dio-driver.c index 69c46935ffc7..2d9fa6011945 100644 --- a/drivers/dio/dio-driver.c +++ b/drivers/dio/dio-driver.c @@ -123,7 +123,7 @@ static int dio_bus_match(struct device *dev, struct device_driver *drv) } -struct bus_type dio_bus_type = { +const struct bus_type dio_bus_type = { .name = "dio", .match = dio_bus_match, .probe = dio_device_probe, diff --git a/include/linux/dio.h b/include/linux/dio.h index 5abd07361eb5..2b5923909f96 100644 --- a/include/linux/dio.h +++ b/include/linux/dio.h @@ -68,7 +68,7 @@ struct dio_bus { }; extern struct dio_bus dio_bus; /* Single DIO bus */ -extern struct bus_type dio_bus_type; +extern const struct bus_type dio_bus_type; /* * DIO device IDs -- cgit v1.2.3 From 6501ac11b90f1c9fe7208e95f69f80bf55286c3e Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Mon, 19 Feb 2024 16:49:30 -0300 Subject: siox: constify the struct device_type usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the siox_device_type and siox_master_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Acked-by: Uwe Kleine-König Acked-by: Thorsten Scherer Link: https://lore.kernel.org/r/20240219-device_cleanup-siox-v1-1-eb32ca2b0113@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/siox/siox-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/siox/siox-core.c b/drivers/siox/siox-core.c index 561408583b2b..8eca20c2ea9c 100644 --- a/drivers/siox/siox-core.c +++ b/drivers/siox/siox-core.c @@ -498,7 +498,7 @@ static void siox_device_release(struct device *dev) kfree(sdevice); } -static struct device_type siox_device_type = { +static const struct device_type siox_device_type = { .groups = siox_device_groups, .release = siox_device_release, }; @@ -676,7 +676,7 @@ static void siox_master_release(struct device *dev) kfree(smaster); } -static struct device_type siox_master_type = { +static const struct device_type siox_master_type = { .groups = siox_master_groups, .release = siox_master_release, }; -- cgit v1.2.3 From a7478b3d9da7a1bf3478c94ee33c93631ea03f9b Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Fri, 1 Mar 2024 18:21:38 -0300 Subject: tifm: make tifm_adapter_class constant Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the tifm_adapter_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Link: https://lore.kernel.org/r/20240301-class_cleanup-char-misc-v1-1-4e2a41bef8cc@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/misc/tifm_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/tifm_core.c b/drivers/misc/tifm_core.c index eee9b6581604..d2eb31f39aa7 100644 --- a/drivers/misc/tifm_core.c +++ b/drivers/misc/tifm_core.c @@ -166,7 +166,7 @@ static void tifm_free(struct device *dev) kfree(fm); } -static struct class tifm_adapter_class = { +static const struct class tifm_adapter_class = { .name = "tifm_adapter", .dev_release = tifm_free }; -- cgit v1.2.3 From 01771a598d1e19bc114ae4f08495700e2e721a41 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Tue, 27 Feb 2024 12:40:29 +0100 Subject: mcb: make mcb_bus_type const Now that the driver core can properly handle constant struct bus_type, move the mcb_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Reviewed-by: Greg Kroah-Hartman Reviewed-by: Johannes Thumshirn Signed-off-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20240227114029.22319-2-jth@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/mcb/mcb-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index 61994da7bad0..0c939f867f0d 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -156,7 +156,7 @@ static const struct attribute_group *mcb_carrier_groups[] = { }; -static struct bus_type mcb_bus_type = { +static const struct bus_type mcb_bus_type = { .name = "mcb", .match = mcb_match, .uevent = mcb_uevent, -- cgit v1.2.3 From 3b1a9b58402ee48c527e834d48d33fc502199335 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Mon, 19 Feb 2024 16:52:00 -0300 Subject: mcb: constify the struct device_type usage Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the mcb_carrier_device_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Link: https://lore.kernel.org/r/20240219-device_cleanup-mcb-v1-1-dc930e7dc11c@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/mcb/mcb-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mcb/mcb-core.c b/drivers/mcb/mcb-core.c index 0c939f867f0d..267045b76505 100644 --- a/drivers/mcb/mcb-core.c +++ b/drivers/mcb/mcb-core.c @@ -165,7 +165,7 @@ static const struct bus_type mcb_bus_type = { .shutdown = mcb_shutdown, }; -static struct device_type mcb_carrier_device_type = { +static const struct device_type mcb_carrier_device_type = { .name = "mcb-carrier", .groups = mcb_carrier_groups, }; -- cgit v1.2.3 From 664c89c56e854f1a8a8b1968690ba08f7fe843fc Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Sun, 4 Feb 2024 19:26:42 -0300 Subject: siox: make siox_bus_type const MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit d492cc2573a0 ("driver core: device.h: make struct bus_type a const *"), the driver core can properly handle constant struct bus_type. Move the siox_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Acked-by: Uwe Kleine-König Reviewed-by: Greg Kroah-Hartman Acked-by: Thorsten Scherer Link: https://lore.kernel.org/r/20240204-bus_cleanup-siox-v2-1-3813a6a55dcc@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/siox/siox-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/siox/siox-core.c b/drivers/siox/siox-core.c index 8eca20c2ea9c..f937cbc8c5aa 100644 --- a/drivers/siox/siox-core.c +++ b/drivers/siox/siox-core.c @@ -543,7 +543,7 @@ static void siox_shutdown(struct device *dev) sdriver->shutdown(sdevice); } -static struct bus_type siox_bus_type = { +static const struct bus_type siox_bus_type = { .name = "siox", .match = siox_match, .probe = siox_probe, -- cgit v1.2.3 From 3bd291383c727bfbe6e8d21e2c16776fe9bd7dcf Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 14 Jan 2024 10:57:02 +0100 Subject: greybus: Remove usage of the deprecated ida_simple_xx() API ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added when needed. Signed-off-by: Christophe JAILLET Reviewed-by: Alex Elder Link: https://lore.kernel.org/r/26425379d3eb9ba1b9af44468576ee20c77eb248.1705226208.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman --- drivers/greybus/es2.c | 8 ++++---- drivers/greybus/hd.c | 16 ++++++++-------- drivers/greybus/interface.c | 9 ++++----- 3 files changed, 16 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/greybus/es2.c b/drivers/greybus/es2.c index e89cca015095..1ee78d0d90b4 100644 --- a/drivers/greybus/es2.c +++ b/drivers/greybus/es2.c @@ -513,16 +513,16 @@ static int es2_cport_allocate(struct gb_host_device *hd, int cport_id, if (cport_id < 0) { ida_start = 0; - ida_end = hd->num_cports; + ida_end = hd->num_cports - 1; } else if (cport_id < hd->num_cports) { ida_start = cport_id; - ida_end = cport_id + 1; + ida_end = cport_id; } else { dev_err(&hd->dev, "cport %d not available\n", cport_id); return -EINVAL; } - return ida_simple_get(id_map, ida_start, ida_end, GFP_KERNEL); + return ida_alloc_range(id_map, ida_start, ida_end, GFP_KERNEL); } static void es2_cport_release(struct gb_host_device *hd, u16 cport_id) @@ -535,7 +535,7 @@ static void es2_cport_release(struct gb_host_device *hd, u16 cport_id) return; } - ida_simple_remove(&hd->cport_id_map, cport_id); + ida_free(&hd->cport_id_map, cport_id); } static int cport_enable(struct gb_host_device *hd, u16 cport_id, diff --git a/drivers/greybus/hd.c b/drivers/greybus/hd.c index e2f3496bddc3..5de98d9177f1 100644 --- a/drivers/greybus/hd.c +++ b/drivers/greybus/hd.c @@ -50,7 +50,7 @@ int gb_hd_cport_reserve(struct gb_host_device *hd, u16 cport_id) struct ida *id_map = &hd->cport_id_map; int ret; - ret = ida_simple_get(id_map, cport_id, cport_id + 1, GFP_KERNEL); + ret = ida_alloc_range(id_map, cport_id, cport_id, GFP_KERNEL); if (ret < 0) { dev_err(&hd->dev, "failed to reserve cport %u\n", cport_id); return ret; @@ -64,7 +64,7 @@ void gb_hd_cport_release_reserved(struct gb_host_device *hd, u16 cport_id) { struct ida *id_map = &hd->cport_id_map; - ida_simple_remove(id_map, cport_id); + ida_free(id_map, cport_id); } EXPORT_SYMBOL_GPL(gb_hd_cport_release_reserved); @@ -80,16 +80,16 @@ int gb_hd_cport_allocate(struct gb_host_device *hd, int cport_id, if (cport_id < 0) { ida_start = 0; - ida_end = hd->num_cports; + ida_end = hd->num_cports - 1; } else if (cport_id < hd->num_cports) { ida_start = cport_id; - ida_end = cport_id + 1; + ida_end = cport_id; } else { dev_err(&hd->dev, "cport %d not available\n", cport_id); return -EINVAL; } - return ida_simple_get(id_map, ida_start, ida_end, GFP_KERNEL); + return ida_alloc_range(id_map, ida_start, ida_end, GFP_KERNEL); } /* Locking: Caller guarantees serialisation */ @@ -100,7 +100,7 @@ void gb_hd_cport_release(struct gb_host_device *hd, u16 cport_id) return; } - ida_simple_remove(&hd->cport_id_map, cport_id); + ida_free(&hd->cport_id_map, cport_id); } static void gb_hd_release(struct device *dev) @@ -111,7 +111,7 @@ static void gb_hd_release(struct device *dev) if (hd->svc) gb_svc_put(hd->svc); - ida_simple_remove(&gb_hd_bus_id_map, hd->bus_id); + ida_free(&gb_hd_bus_id_map, hd->bus_id); ida_destroy(&hd->cport_id_map); kfree(hd); } @@ -162,7 +162,7 @@ struct gb_host_device *gb_hd_create(struct gb_hd_driver *driver, if (!hd) return ERR_PTR(-ENOMEM); - ret = ida_simple_get(&gb_hd_bus_id_map, 1, 0, GFP_KERNEL); + ret = ida_alloc_min(&gb_hd_bus_id_map, 1, GFP_KERNEL); if (ret < 0) { kfree(hd); return ERR_PTR(ret); diff --git a/drivers/greybus/interface.c b/drivers/greybus/interface.c index a88dc701289c..fd58a86b0888 100644 --- a/drivers/greybus/interface.c +++ b/drivers/greybus/interface.c @@ -131,9 +131,8 @@ static int gb_interface_route_create(struct gb_interface *intf) int ret; /* Allocate an interface device id. */ - ret = ida_simple_get(&svc->device_id_map, - GB_SVC_DEVICE_ID_MIN, GB_SVC_DEVICE_ID_MAX + 1, - GFP_KERNEL); + ret = ida_alloc_range(&svc->device_id_map, GB_SVC_DEVICE_ID_MIN, + GB_SVC_DEVICE_ID_MAX, GFP_KERNEL); if (ret < 0) { dev_err(&intf->dev, "failed to allocate device id: %d\n", ret); return ret; @@ -165,7 +164,7 @@ err_svc_id_free: * XXX anymore. */ err_ida_remove: - ida_simple_remove(&svc->device_id_map, device_id); + ida_free(&svc->device_id_map, device_id); return ret; } @@ -178,7 +177,7 @@ static void gb_interface_route_destroy(struct gb_interface *intf) return; gb_svc_route_destroy(svc, svc->ap_intf_id, intf->interface_id); - ida_simple_remove(&svc->device_id_map, intf->device_id); + ida_free(&svc->device_id_map, intf->device_id); intf->device_id = GB_INTERFACE_DEVICE_ID_BAD; } -- cgit v1.2.3 From a13bd6f3c936edff957f2d02cf65c44046cb1243 Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Mon, 26 Feb 2024 18:05:19 -0300 Subject: greybus: move is_gb_* functions out of greybus.h The functions below are only used within the context of drivers/greybus/core.c, so move them all into core and drop their 'inline' specifiers: is_gb_host_device(), is_gb_module(), is_gb_interface(), is_gb_control(), is_gb_bundle() and is_gb_svc(). Suggested-by: Alex Elder Cc: Greg Kroah-Hartman Signed-off-by: "Ricardo B. Marliere" Reviewed-by: Alex Elder Link: https://lore.kernel.org/r/20240226-device_cleanup-greybus2-v1-1-5f7d1161e684@marliere.net Signed-off-by: Greg Kroah-Hartman --- drivers/greybus/core.c | 30 ++++++++++++++++++++++++++++++ include/linux/greybus.h | 30 ------------------------------ 2 files changed, 30 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/greybus/core.c b/drivers/greybus/core.c index b0aadc1e7bbe..95c09d4f3a86 100644 --- a/drivers/greybus/core.c +++ b/drivers/greybus/core.c @@ -27,6 +27,36 @@ int greybus_disabled(void) } EXPORT_SYMBOL_GPL(greybus_disabled); +static int is_gb_host_device(const struct device *dev) +{ + return dev->type == &greybus_hd_type; +} + +static int is_gb_module(const struct device *dev) +{ + return dev->type == &greybus_module_type; +} + +static int is_gb_interface(const struct device *dev) +{ + return dev->type == &greybus_interface_type; +} + +static int is_gb_control(const struct device *dev) +{ + return dev->type == &greybus_control_type; +} + +static int is_gb_bundle(const struct device *dev) +{ + return dev->type == &greybus_bundle_type; +} + +static int is_gb_svc(const struct device *dev) +{ + return dev->type == &greybus_svc_type; +} + static bool greybus_match_one_id(struct gb_bundle *bundle, const struct greybus_bundle_id *id) { diff --git a/include/linux/greybus.h b/include/linux/greybus.h index 2cc570ea63bf..634c9511cf78 100644 --- a/include/linux/greybus.h +++ b/include/linux/greybus.h @@ -113,36 +113,6 @@ extern const struct device_type greybus_control_type; extern const struct device_type greybus_bundle_type; extern const struct device_type greybus_svc_type; -static inline int is_gb_host_device(const struct device *dev) -{ - return dev->type == &greybus_hd_type; -} - -static inline int is_gb_module(const struct device *dev) -{ - return dev->type == &greybus_module_type; -} - -static inline int is_gb_interface(const struct device *dev) -{ - return dev->type == &greybus_interface_type; -} - -static inline int is_gb_control(const struct device *dev) -{ - return dev->type == &greybus_control_type; -} - -static inline int is_gb_bundle(const struct device *dev) -{ - return dev->type == &greybus_bundle_type; -} - -static inline int is_gb_svc(const struct device *dev) -{ - return dev->type == &greybus_svc_type; -} - static inline bool cport_id_valid(struct gb_host_device *hd, u16 cport_id) { return cport_id != CPORT_ID_BAD && cport_id < hd->num_cports; -- cgit v1.2.3 From 4a055328414cb511e12b2c54c8b26c1ba4645ae8 Mon Sep 17 00:00:00 2001 From: Javier Carrasco Date: Sun, 3 Mar 2024 23:34:39 +0100 Subject: char: xilinx_hwicap: drop casting to void in dev_set_drvdata The C standard specifies that there is no need to cast from a pointer to void [1]. Therefore, it can be safely dropped. [1] C Standard Committee: https://c0x.shape-of-code.com/6.3.2.3.html Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20240303-void_in_dev_set_drvdata-v1-1-ae39027d740b@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/char/xilinx_hwicap/xilinx_hwicap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index 019cf6079cec..3aaa4b4d9f08 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -636,7 +636,7 @@ static int hwicap_setup(struct platform_device *pdev, int id, retval = -ENOMEM; goto failed; } - dev_set_drvdata(dev, (void *)drvdata); + dev_set_drvdata(dev, drvdata); drvdata->base_address = devm_platform_ioremap_resource(pdev, 0); if (!drvdata->base_address) { -- cgit v1.2.3 From 8af2d2025d25870da73871abe3d1d93b6e903cc2 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 4 Feb 2024 17:10:04 +0900 Subject: platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH Currently, there are two entries for CONFIG_GOLDFISH. In arch/x86/Kconfig: config GOLDFISH def_bool y depends on X86_GOLDFISH In drivers/platform/goldfish/Kconfig: menuconfig GOLDFISH bool "Platform support for Goldfish virtual devices" depends on HAS_IOMEM && HAS_DMA While Kconfig allows multiple entries, it generally leads to tricky code. Prior to commit bd2f348db503 ("goldfish: refactor goldfish platform configs"), CONFIG_GOLDFISH was an alias of CONFIG_X86_GOLDFISH. After the mentioned commit added the second entry with a user prompt, the former provides the 'default' property that is effective only when X86_GOLDFISH=y. Merge them tegether to clarify how it has worked in the past 8 years. Cc: Greg Hackmann Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20240204081004.33871-1-masahiroy@kernel.org Signed-off-by: Greg Kroah-Hartman --- arch/x86/Kconfig | 4 ---- drivers/platform/goldfish/Kconfig | 1 + 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5edec175b9bf..eb6c9f5b3be7 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -471,10 +471,6 @@ config X86_MPPARSE For old smp systems that do not have proper acpi support. Newer systems (esp with 64bit cpus) with acpi support, MADT and DSDT will override it -config GOLDFISH - def_bool y - depends on X86_GOLDFISH - config X86_CPU_RESCTRL bool "x86 CPU resource control support" depends on X86 && (CPU_SUP_INTEL || CPU_SUP_AMD) diff --git a/drivers/platform/goldfish/Kconfig b/drivers/platform/goldfish/Kconfig index f3d09b1631e3..03ca5bf19f98 100644 --- a/drivers/platform/goldfish/Kconfig +++ b/drivers/platform/goldfish/Kconfig @@ -2,6 +2,7 @@ menuconfig GOLDFISH bool "Platform support for Goldfish virtual devices" depends on HAS_IOMEM && HAS_DMA + default X86_GOLDFISH help Say Y here to get to see options for the Goldfish virtual platform. This option alone does not add any kernel code. -- cgit v1.2.3 From b44abdd29423a77074a9edb462de37f1a09daaab Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Tue, 13 Feb 2024 12:15:27 +0100 Subject: hpet: remove hpets::hp_clocksource Commit cf8e8658100d (arch: Remove Itanium (IA-64) architecture) removed the last user of hpets::hp_clocksource. Drop the member. Found by https://github.com/jirislaby/clang-struct. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Clemens Ladisch Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20240213111527.25218-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/char/hpet.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 9c90b1d2c036..d51fc8321d41 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -87,7 +87,6 @@ struct hpets { struct hpets *hp_next; struct hpet __iomem *hp_hpet; unsigned long hp_hpet_phys; - struct clocksource *hp_clocksource; unsigned long long hp_tick_freq; unsigned long hp_delta; unsigned int hp_ntimer; -- cgit v1.2.3 From 316459ba4051fd91237171fdca88920128a646f1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 20 Feb 2024 12:02:31 +0300 Subject: char: xilinx_hwicap: Fix NULL vs IS_ERR() bug The devm_platform_ioremap_resource() function returns error pointers. It never returns NULL. Update the check accordingly. Fixes: 672371832193 ("char: xilinx_hwicap: Modernize driver probe") Signed-off-by: Dan Carpenter Acked-by: Michal Simek Link: https://lore.kernel.org/r/ef647a9c-b1b7-4338-9bc0-28165ec2a367@moroto.mountain Signed-off-by: Greg Kroah-Hartman --- drivers/char/xilinx_hwicap/xilinx_hwicap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index 3aaa4b4d9f08..4f6c3cb8aa41 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -639,8 +639,8 @@ static int hwicap_setup(struct platform_device *pdev, int id, dev_set_drvdata(dev, drvdata); drvdata->base_address = devm_platform_ioremap_resource(pdev, 0); - if (!drvdata->base_address) { - retval = -ENODEV; + if (IS_ERR(drvdata->base_address)) { + retval = PTR_ERR(drvdata->base_address); goto failed; } -- cgit v1.2.3 From 832c17b8b658aa88f237d7025906334cb96bbdcb Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 6 Mar 2024 18:57:10 +0100 Subject: char: xillybus: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Acked-by: Eli Billauer Link: https://lore.kernel.org/r/20240306175710.82569-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/char/xillybus/xillybus_of.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/xillybus/xillybus_of.c b/drivers/char/xillybus/xillybus_of.c index e5372e45d211..8802e2a6fd20 100644 --- a/drivers/char/xillybus/xillybus_of.c +++ b/drivers/char/xillybus/xillybus_of.c @@ -64,19 +64,17 @@ static int xilly_drv_probe(struct platform_device *op) return xillybus_endpoint_discovery(endpoint); } -static int xilly_drv_remove(struct platform_device *op) +static void xilly_drv_remove(struct platform_device *op) { struct device *dev = &op->dev; struct xilly_endpoint *endpoint = dev_get_drvdata(dev); xillybus_endpoint_remove(endpoint); - - return 0; } static struct platform_driver xillybus_platform_driver = { .probe = xilly_drv_probe, - .remove = xilly_drv_remove, + .remove_new = xilly_drv_remove, .driver = { .name = xillyname, .of_match_table = xillybus_of_match, -- cgit v1.2.3 From adf4e1055522f62e2c23926c9c66d49c70dfcd15 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 18 Dec 2023 22:05:18 +0100 Subject: parport: amiga: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/75b3b8f498d6079c974bd47c763c589b9d2c00f6.1702933181.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_amiga.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c index 84d5701d606c..e6dc857aac3f 100644 --- a/drivers/parport/parport_amiga.c +++ b/drivers/parport/parport_amiga.c @@ -219,7 +219,7 @@ out_irq: return err; } -static int __exit amiga_parallel_remove(struct platform_device *pdev) +static void __exit amiga_parallel_remove(struct platform_device *pdev) { struct parport *port = platform_get_drvdata(pdev); @@ -227,11 +227,10 @@ static int __exit amiga_parallel_remove(struct platform_device *pdev) if (port->irq != PARPORT_IRQ_NONE) free_irq(IRQ_AMIGA_CIAA_FLG, port); parport_put_port(port); - return 0; } static struct platform_driver amiga_parallel_driver = { - .remove = __exit_p(amiga_parallel_remove), + .remove_new = __exit_p(amiga_parallel_remove), .driver = { .name = "amiga-parallel", }, -- cgit v1.2.3 From 813f008d4343bd5ecc14790cf98ad24deb7e8d2d Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 18 Dec 2023 22:05:19 +0100 Subject: parport: sunbpp: Convert to platform remove callback returning void MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/f0372246783c7eebb859f82b4b23a9ae25b0adf1.1702933181.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_sunbpp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c index c81d4d86994b..949236a7a27c 100644 --- a/drivers/parport/parport_sunbpp.c +++ b/drivers/parport/parport_sunbpp.c @@ -334,7 +334,7 @@ out_unmap: return err; } -static int bpp_remove(struct platform_device *op) +static void bpp_remove(struct platform_device *op) { struct parport *p = dev_get_drvdata(&op->dev); struct parport_operations *ops = p->ops; @@ -351,8 +351,6 @@ static int bpp_remove(struct platform_device *op) kfree(ops); dev_set_drvdata(&op->dev, NULL); - - return 0; } static const struct of_device_id bpp_match[] = { @@ -370,7 +368,7 @@ static struct platform_driver bpp_sbus_driver = { .of_match_table = bpp_match, }, .probe = bpp_probe, - .remove = bpp_remove, + .remove_new = bpp_remove, }; module_platform_driver(bpp_sbus_driver); -- cgit v1.2.3 From b6c8dafc9d86eb77e502bb018ec4105e8d2fbf78 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sun, 4 Feb 2024 16:57:36 +0100 Subject: speakup: Fix 8bit characters from direct synth When userland echoes 8bit characters to /dev/synth with e.g. echo -e '\xe9' > /dev/synth synth_write would get characters beyond 0x7f, and thus negative when char is signed. When given to synth_buffer_add which takes a u16, this would sign-extend and produce a U+ffxy character rather than U+xy. Users thus get garbled text instead of accents in their output. Let's fix this by making sure that we read unsigned characters. Signed-off-by: Samuel Thibault Fixes: 89fc2ae80bb1 ("speakup: extend synth buffer to 16bit unicode characters") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240204155736.2oh4ot7tiaa2wpbh@begin Signed-off-by: Greg Kroah-Hartman --- drivers/accessibility/speakup/synth.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/accessibility/speakup/synth.c b/drivers/accessibility/speakup/synth.c index eea2a2fa4f01..45f906103133 100644 --- a/drivers/accessibility/speakup/synth.c +++ b/drivers/accessibility/speakup/synth.c @@ -208,8 +208,10 @@ void spk_do_flush(void) wake_up_process(speakup_task); } -void synth_write(const char *buf, size_t count) +void synth_write(const char *_buf, size_t count) { + const unsigned char *buf = (const unsigned char *) _buf; + while (count--) synth_buffer_add(*buf++); synth_start(); -- cgit v1.2.3 From 807977260ae4de1cf39cfc55713fc0bc56566f7a Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sun, 4 Feb 2024 16:58:25 +0100 Subject: speakup: Add /dev/synthu device /dev/synth has always been 8bit, but applications nowadays mostly expect to be using utf-8 encoding. This adds /dev/synthu to be able to synthesize non-latin1 characters. This however remains limited to 16bit unicode like the rest of speakup. Any odd input or input beyond 16bit is just discarded. Signed-off-by: Samuel Thibault =================================================================== Link: https://lore.kernel.org/r/20240204155825.ditstifsbqndnce3@begin Signed-off-by: Greg Kroah-Hartman --- drivers/accessibility/speakup/devsynth.c | 148 +++++++++++++++++++++++++++---- 1 file changed, 133 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/accessibility/speakup/devsynth.c b/drivers/accessibility/speakup/devsynth.c index d30571663585..da4d0f6aa5bf 100644 --- a/drivers/accessibility/speakup/devsynth.c +++ b/drivers/accessibility/speakup/devsynth.c @@ -7,9 +7,10 @@ #include "speakup.h" #include "spk_priv.h" -static int misc_registered; +static int synth_registered, synthu_registered; static int dev_opened; +/* Latin1 version */ static ssize_t speakup_file_write(struct file *fp, const char __user *buffer, size_t nbytes, loff_t *ppos) { @@ -34,6 +35,97 @@ static ssize_t speakup_file_write(struct file *fp, const char __user *buffer, return (ssize_t)nbytes; } +/* UTF-8 version */ +static ssize_t speakup_file_writeu(struct file *fp, const char __user *buffer, + size_t nbytes, loff_t *ppos) +{ + size_t count = nbytes, want; + const char __user *ptr = buffer; + size_t bytes; + unsigned long flags; + unsigned char buf[256]; + u16 ubuf[256]; + size_t in, in2, out; + + if (!synth) + return -ENODEV; + + want = 1; + while (count >= want) { + /* Copy some UTF-8 piece from userland */ + bytes = min(count, sizeof(buf)); + if (copy_from_user(buf, ptr, bytes)) + return -EFAULT; + + /* Convert to u16 */ + for (in = 0, out = 0; in < bytes; in++) { + unsigned char c = buf[in]; + int nbytes = 8 - fls(c ^ 0xff); + u32 value; + + switch (nbytes) { + case 8: /* 0xff */ + case 7: /* 0xfe */ + case 1: /* 0x80 */ + /* Invalid, drop */ + goto drop; + + case 0: + /* ASCII, copy */ + ubuf[out++] = c; + continue; + + default: + /* 2..6-byte UTF-8 */ + + if (bytes - in < nbytes) { + /* We don't have it all yet, stop here + * and wait for the rest + */ + bytes = in; + want = nbytes; + continue; + } + + /* First byte */ + value = c & ((1u << (7 - nbytes)) - 1); + + /* Other bytes */ + for (in2 = 2; in2 <= nbytes; in2++) { + c = buf[in + 1]; + if ((c & 0xc0) != 0x80) { + /* Invalid, drop the head */ + want = 1; + goto drop; + } + value = (value << 6) | (c & 0x3f); + in++; + } + + if (value < 0x10000) + ubuf[out++] = value; + want = 1; + break; + } +drop: + } + + count -= bytes; + ptr += bytes; + + /* And speak this up */ + if (out) { + spin_lock_irqsave(&speakup_info.spinlock, flags); + for (in = 0; in < out; in++) + synth_buffer_add(ubuf[in]); + synth_start(); + spin_unlock_irqrestore(&speakup_info.spinlock, flags); + } + } + + return (ssize_t)(nbytes - count); +} + static ssize_t speakup_file_read(struct file *fp, char __user *buf, size_t nbytes, loff_t *ppos) { @@ -62,31 +154,57 @@ static const struct file_operations synth_fops = { .release = speakup_file_release, }; +static const struct file_operations synthu_fops = { + .read = speakup_file_read, + .write = speakup_file_writeu, + .open = speakup_file_open, + .release = speakup_file_release, +}; + static struct miscdevice synth_device = { .minor = MISC_DYNAMIC_MINOR, .name = "synth", .fops = &synth_fops, }; +static struct miscdevice synthu_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "synthu", + .fops = &synthu_fops, +}; + void speakup_register_devsynth(void) { - if (misc_registered != 0) - return; -/* zero it so if register fails, deregister will not ref invalid ptrs */ - if (misc_register(&synth_device)) { - pr_warn("Couldn't initialize miscdevice /dev/synth.\n"); - } else { - pr_info("initialized device: /dev/synth, node (MAJOR %d, MINOR %d)\n", - MISC_MAJOR, synth_device.minor); - misc_registered = 1; + if (!synth_registered) { + if (misc_register(&synth_device)) { + pr_warn("Couldn't initialize miscdevice /dev/synth.\n"); + } else { + pr_info("initialized device: /dev/synth, node (MAJOR %d, MINOR %d)\n", + MISC_MAJOR, synth_device.minor); + synth_registered = 1; + } + } + if (!synthu_registered) { + if (misc_register(&synthu_device)) { + pr_warn("Couldn't initialize miscdevice /dev/synthu.\n"); + } else { + pr_info("initialized device: /dev/synthu, node (MAJOR %d, MINOR %d)\n", + MISC_MAJOR, synthu_device.minor); + synthu_registered = 1; + } } } void speakup_unregister_devsynth(void) { - if (!misc_registered) - return; - pr_info("speakup: unregistering synth device /dev/synth\n"); - misc_deregister(&synth_device); - misc_registered = 0; + if (synth_registered) { + pr_info("speakup: unregistering synth device /dev/synth\n"); + misc_deregister(&synth_device); + synth_registered = 0; + } + if (synthu_registered) { + pr_info("speakup: unregistering synth device /dev/synthu\n"); + misc_deregister(&synthu_device); + synthu_registered = 0; + } } -- cgit v1.2.3 From e3a59056a655975868863a80fc8c05cb25e3b866 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Wed, 6 Mar 2024 13:05:15 +0100 Subject: pps: use cflags-y instead of EXTRA_CFLAGS Commit f77bf01425b1 ("kbuild: introduce ccflags-y, asflags-y and ldflags-y") deprecates use of EXTRA_CFLAGS in the kernel build. This has been cleaned up in the whole kernel tree long ago, but this one single place must have been missed. Replace the EXTRA_CFLAGS use by the common pattern for such debug flags. No functional change. Signed-off-by: Lukas Bulwahn Acked-by: Rodolfo Giometti Link: https://lore.kernel.org/r/20240306120515.15711-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/pps/generators/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pps/generators/Makefile b/drivers/pps/generators/Makefile index 2d56dd0495d5..2589fd0f2481 100644 --- a/drivers/pps/generators/Makefile +++ b/drivers/pps/generators/Makefile @@ -5,6 +5,4 @@ obj-$(CONFIG_PPS_GENERATOR_PARPORT) += pps_gen_parport.o -ifeq ($(CONFIG_PPS_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG -- cgit v1.2.3 From 0e439ba38e615e505404b3935585f1898bafaea9 Mon Sep 17 00:00:00 2001 From: Nipun Gupta Date: Mon, 26 Feb 2024 13:58:16 +0530 Subject: cdx: add MSI support for CDX bus Add CDX-MSI domain per CDX controller with gic-its domain as a parent, to support MSI for CDX devices. CDX devices allocate MSIs from the CDX domain. Also, introduce APIs to alloc and free IRQs for CDX domain. In CDX subsystem firmware is a controller for all devices and their configuration. CDX bus controller sends all the write_msi_msg commands to firmware running on RPU and the firmware interfaces with actual devices to pass this information to devices Since, CDX controller is the only way to communicate with the Firmware for MSI write info, CDX domain per controller required in contrast to having a CDX domain per device. Co-developed-by: Nikhil Agarwal Signed-off-by: Nikhil Agarwal Co-developed-by: Abhijit Gangurde Signed-off-by: Abhijit Gangurde Signed-off-by: Nipun Gupta Reviewed-by: Pieter Jansen van Vuuren Reviewed-by: Thomas Gleixner Tested-by: Nikhil Agarwal Link: https://lore.kernel.org/r/20240226082816.100872-1-nipun.gupta@amd.com Signed-off-by: Greg Kroah-Hartman --- drivers/cdx/Makefile | 4 + drivers/cdx/cdx.c | 20 ++++ drivers/cdx/cdx.h | 12 ++ drivers/cdx/cdx_msi.c | 192 ++++++++++++++++++++++++++++++++ drivers/cdx/controller/Kconfig | 1 + drivers/cdx/controller/cdx_controller.c | 25 +++++ drivers/cdx/controller/mc_cdx_pcol.h | 64 +++++++++++ drivers/cdx/controller/mcdi_functions.c | 33 +++++- drivers/cdx/controller/mcdi_functions.h | 33 ++++++ include/linux/cdx/cdx_bus.h | 53 ++++++++- 10 files changed, 434 insertions(+), 3 deletions(-) create mode 100644 drivers/cdx/cdx_msi.c (limited to 'drivers') diff --git a/drivers/cdx/Makefile b/drivers/cdx/Makefile index 5d1ea482419f..749a3295c2bd 100644 --- a/drivers/cdx/Makefile +++ b/drivers/cdx/Makefile @@ -8,3 +8,7 @@ ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=CDX_BUS obj-$(CONFIG_CDX_BUS) += cdx.o controller/ + +ifdef CONFIG_GENERIC_MSI_IRQ +obj-$(CONFIG_CDX_BUS) += cdx_msi.o +endif diff --git a/drivers/cdx/cdx.c b/drivers/cdx/cdx.c index b74d76afccb6..236d381dc5f7 100644 --- a/drivers/cdx/cdx.c +++ b/drivers/cdx/cdx.c @@ -56,6 +56,7 @@ */ #include +#include #include #include #include @@ -302,8 +303,19 @@ static int cdx_probe(struct device *dev) { struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver); struct cdx_device *cdx_dev = to_cdx_device(dev); + struct cdx_controller *cdx = cdx_dev->cdx; int error; + /* + * Setup MSI device data so that generic MSI alloc/free can + * be used by the device driver. + */ + if (cdx->msi_domain) { + error = msi_setup_device_data(&cdx_dev->dev); + if (error) + return error; + } + error = cdx_drv->probe(cdx_dev); if (error) { dev_err_probe(dev, error, "%s failed\n", __func__); @@ -787,6 +799,7 @@ int cdx_device_add(struct cdx_dev_params *dev_params) /* Populate CDX dev params */ cdx_dev->req_id = dev_params->req_id; + cdx_dev->msi_dev_id = dev_params->msi_dev_id; cdx_dev->vendor = dev_params->vendor; cdx_dev->device = dev_params->device; cdx_dev->subsystem_vendor = dev_params->subsys_vendor; @@ -804,12 +817,19 @@ int cdx_device_add(struct cdx_dev_params *dev_params) cdx_dev->dev.bus = &cdx_bus_type; cdx_dev->dev.dma_mask = &cdx_dev->dma_mask; cdx_dev->dev.release = cdx_device_release; + cdx_dev->msi_write_pending = false; + mutex_init(&cdx_dev->irqchip_lock); /* Set Name */ dev_set_name(&cdx_dev->dev, "cdx-%02x:%02x", ((cdx->id << CDX_CONTROLLER_ID_SHIFT) | (cdx_dev->bus_num & CDX_BUS_NUM_MASK)), cdx_dev->dev_num); + if (cdx->msi_domain) { + cdx_dev->num_msi = dev_params->num_msi; + dev_set_msi_domain(&cdx_dev->dev, cdx->msi_domain); + } + ret = device_add(&cdx_dev->dev); if (ret) { dev_err(&cdx_dev->dev, diff --git a/drivers/cdx/cdx.h b/drivers/cdx/cdx.h index 300ad8be7a34..9c60c04dcf87 100644 --- a/drivers/cdx/cdx.h +++ b/drivers/cdx/cdx.h @@ -25,6 +25,8 @@ * @req_id: Requestor ID associated with CDX device * @class: Class of the CDX Device * @revision: Revision of the CDX device + * @msi_dev_id: MSI device ID associated with CDX device + * @num_msi: Number of MSI's supported by the device */ struct cdx_dev_params { struct cdx_controller *cdx; @@ -40,6 +42,8 @@ struct cdx_dev_params { u32 req_id; u32 class; u8 revision; + u32 msi_dev_id; + u32 num_msi; }; /** @@ -79,4 +83,12 @@ int cdx_device_add(struct cdx_dev_params *dev_params); */ struct device *cdx_bus_add(struct cdx_controller *cdx, u8 bus_num); +/** + * cdx_msi_domain_init - Init the CDX bus MSI domain. + * @dev: Device of the CDX bus controller + * + * Return: CDX MSI domain, NULL on failure + */ +struct irq_domain *cdx_msi_domain_init(struct device *dev); + #endif /* _CDX_H_ */ diff --git a/drivers/cdx/cdx_msi.c b/drivers/cdx/cdx_msi.c new file mode 100644 index 000000000000..e55f1716cfcb --- /dev/null +++ b/drivers/cdx/cdx_msi.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AMD CDX bus driver MSI support + * + * Copyright (C) 2022-2023, Advanced Micro Devices, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cdx.h" + +static void cdx_msi_write_msg(struct irq_data *irq_data, struct msi_msg *msg) +{ + struct msi_desc *msi_desc = irq_data_get_msi_desc(irq_data); + struct cdx_device *cdx_dev = to_cdx_device(msi_desc->dev); + + /* We would not operate on msg here rather we wait for irq_bus_sync_unlock() + * to be called from preemptible task context. + */ + msi_desc->msg = *msg; + cdx_dev->msi_write_pending = true; +} + +static void cdx_msi_write_irq_lock(struct irq_data *irq_data) +{ + struct msi_desc *msi_desc = irq_data_get_msi_desc(irq_data); + struct cdx_device *cdx_dev = to_cdx_device(msi_desc->dev); + + mutex_lock(&cdx_dev->irqchip_lock); +} + +static void cdx_msi_write_irq_unlock(struct irq_data *irq_data) +{ + struct msi_desc *msi_desc = irq_data_get_msi_desc(irq_data); + struct cdx_device *cdx_dev = to_cdx_device(msi_desc->dev); + struct cdx_controller *cdx = cdx_dev->cdx; + struct cdx_device_config dev_config; + + if (!cdx_dev->msi_write_pending) { + mutex_unlock(&cdx_dev->irqchip_lock); + return; + } + + cdx_dev->msi_write_pending = false; + mutex_unlock(&cdx_dev->irqchip_lock); + + dev_config.msi.msi_index = msi_desc->msi_index; + dev_config.msi.data = msi_desc->msg.data; + dev_config.msi.addr = ((u64)(msi_desc->msg.address_hi) << 32) | msi_desc->msg.address_lo; + + /* + * dev_configure() is a controller callback which can interact with + * Firmware or other entities, and can sleep, so invoke this function + * outside of the mutex held region. + */ + dev_config.type = CDX_DEV_MSI_CONF; + if (cdx->ops->dev_configure) + cdx->ops->dev_configure(cdx, cdx_dev->bus_num, cdx_dev->dev_num, &dev_config); +} + +int cdx_enable_msi(struct cdx_device *cdx_dev) +{ + struct cdx_controller *cdx = cdx_dev->cdx; + struct cdx_device_config dev_config; + + dev_config.type = CDX_DEV_MSI_ENABLE; + dev_config.msi_enable = true; + if (cdx->ops->dev_configure) { + return cdx->ops->dev_configure(cdx, cdx_dev->bus_num, cdx_dev->dev_num, + &dev_config); + } + + return -EOPNOTSUPP; +} +EXPORT_SYMBOL_GPL(cdx_enable_msi); + +void cdx_disable_msi(struct cdx_device *cdx_dev) +{ + struct cdx_controller *cdx = cdx_dev->cdx; + struct cdx_device_config dev_config; + + dev_config.type = CDX_DEV_MSI_ENABLE; + dev_config.msi_enable = false; + if (cdx->ops->dev_configure) + cdx->ops->dev_configure(cdx, cdx_dev->bus_num, cdx_dev->dev_num, &dev_config); +} +EXPORT_SYMBOL_GPL(cdx_disable_msi); + +static struct irq_chip cdx_msi_irq_chip = { + .name = "CDX-MSI", + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_eoi = irq_chip_eoi_parent, + .irq_set_affinity = msi_domain_set_affinity, + .irq_write_msi_msg = cdx_msi_write_msg, + .irq_bus_lock = cdx_msi_write_irq_lock, + .irq_bus_sync_unlock = cdx_msi_write_irq_unlock +}; + +/* Convert an msi_desc to a unique identifier within the domain. */ +static irq_hw_number_t cdx_domain_calc_hwirq(struct cdx_device *dev, + struct msi_desc *desc) +{ + return ((irq_hw_number_t)dev->msi_dev_id << 10) | desc->msi_index; +} + +static void cdx_msi_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc) +{ + arg->desc = desc; + arg->hwirq = cdx_domain_calc_hwirq(to_cdx_device(desc->dev), desc); +} + +static int cdx_msi_prepare(struct irq_domain *msi_domain, + struct device *dev, + int nvec, msi_alloc_info_t *info) +{ + struct cdx_device *cdx_dev = to_cdx_device(dev); + struct device *parent = cdx_dev->cdx->dev; + struct msi_domain_info *msi_info; + u32 dev_id; + int ret; + + /* Retrieve device ID from requestor ID using parent device */ + ret = of_map_id(parent->of_node, cdx_dev->msi_dev_id, "msi-map", "msi-map-mask", + NULL, &dev_id); + if (ret) { + dev_err(dev, "of_map_id failed for MSI: %d\n", ret); + return ret; + } + +#ifdef GENERIC_MSI_DOMAIN_OPS + /* Set the device Id to be passed to the GIC-ITS */ + info->scratchpad[0].ul = dev_id; +#endif + + msi_info = msi_get_domain_info(msi_domain->parent); + + return msi_info->ops->msi_prepare(msi_domain->parent, dev, nvec, info); +} + +static struct msi_domain_ops cdx_msi_ops = { + .msi_prepare = cdx_msi_prepare, + .set_desc = cdx_msi_set_desc +}; + +static struct msi_domain_info cdx_msi_domain_info = { + .ops = &cdx_msi_ops, + .chip = &cdx_msi_irq_chip, + .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | + MSI_FLAG_ALLOC_SIMPLE_MSI_DESCS | MSI_FLAG_FREE_MSI_DESCS +}; + +struct irq_domain *cdx_msi_domain_init(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct fwnode_handle *fwnode_handle; + struct irq_domain *cdx_msi_domain; + struct device_node *parent_node; + struct irq_domain *parent; + + fwnode_handle = of_node_to_fwnode(np); + + parent_node = of_parse_phandle(np, "msi-map", 1); + if (!parent_node) { + dev_err(dev, "msi-map not present on cdx controller\n"); + return NULL; + } + + parent = irq_find_matching_fwnode(of_node_to_fwnode(parent_node), DOMAIN_BUS_NEXUS); + if (!parent || !msi_get_domain_info(parent)) { + dev_err(dev, "unable to locate ITS domain\n"); + return NULL; + } + + cdx_msi_domain = msi_create_irq_domain(fwnode_handle, &cdx_msi_domain_info, parent); + if (!cdx_msi_domain) { + dev_err(dev, "unable to create CDX-MSI domain\n"); + return NULL; + } + + dev_dbg(dev, "CDX-MSI domain created\n"); + + return cdx_msi_domain; +} +EXPORT_SYMBOL_NS_GPL(cdx_msi_domain_init, CDX_BUS_CONTROLLER); diff --git a/drivers/cdx/controller/Kconfig b/drivers/cdx/controller/Kconfig index 61bf17fbe433..f8e729761aee 100644 --- a/drivers/cdx/controller/Kconfig +++ b/drivers/cdx/controller/Kconfig @@ -9,6 +9,7 @@ if CDX_BUS config CDX_CONTROLLER tristate "CDX bus controller" + select GENERIC_MSI_IRQ select REMOTEPROC select RPMSG help diff --git a/drivers/cdx/controller/cdx_controller.c b/drivers/cdx/controller/cdx_controller.c index 85fe4b1c4e5e..112a1541de6d 100644 --- a/drivers/cdx/controller/cdx_controller.c +++ b/drivers/cdx/controller/cdx_controller.c @@ -9,6 +9,7 @@ #include #include #include +#include #include "cdx_controller.h" #include "../cdx.h" @@ -60,9 +61,19 @@ static int cdx_configure_device(struct cdx_controller *cdx, u8 bus_num, u8 dev_num, struct cdx_device_config *dev_config) { + u16 msi_index; int ret = 0; + u32 data; + u64 addr; switch (dev_config->type) { + case CDX_DEV_MSI_CONF: + msi_index = dev_config->msi.msi_index; + data = dev_config->msi.data; + addr = dev_config->msi.addr; + + ret = cdx_mcdi_write_msi(cdx->priv, bus_num, dev_num, msi_index, addr, data); + break; case CDX_DEV_RESET_CONF: ret = cdx_mcdi_reset_device(cdx->priv, bus_num, dev_num); break; @@ -70,6 +81,9 @@ static int cdx_configure_device(struct cdx_controller *cdx, ret = cdx_mcdi_bus_master_enable(cdx->priv, bus_num, dev_num, dev_config->bus_master_enable); break; + case CDX_DEV_MSI_ENABLE: + ret = cdx_mcdi_msi_enable(cdx->priv, bus_num, dev_num, dev_config->msi_enable); + break; default: ret = -EINVAL; } @@ -178,6 +192,14 @@ static int xlnx_cdx_probe(struct platform_device *pdev) cdx->priv = cdx_mcdi; cdx->ops = &cdx_ops; + /* Create MSI domain */ + cdx->msi_domain = cdx_msi_domain_init(&pdev->dev); + if (!cdx->msi_domain) { + dev_err(&pdev->dev, "cdx_msi_domain_init() failed"); + ret = -ENODEV; + goto cdx_msi_fail; + } + ret = cdx_setup_rpmsg(pdev); if (ret) { if (ret != -EPROBE_DEFER) @@ -189,6 +211,8 @@ static int xlnx_cdx_probe(struct platform_device *pdev) return 0; cdx_rpmsg_fail: + irq_domain_remove(cdx->msi_domain); +cdx_msi_fail: kfree(cdx); cdx_alloc_fail: cdx_mcdi_finish(cdx_mcdi); @@ -205,6 +229,7 @@ static int xlnx_cdx_remove(struct platform_device *pdev) cdx_destroy_rpmsg(pdev); + irq_domain_remove(cdx->msi_domain); kfree(cdx); cdx_mcdi_finish(cdx_mcdi); diff --git a/drivers/cdx/controller/mc_cdx_pcol.h b/drivers/cdx/controller/mc_cdx_pcol.h index 2de019406b57..832a44af963e 100644 --- a/drivers/cdx/controller/mc_cdx_pcol.h +++ b/drivers/cdx/controller/mc_cdx_pcol.h @@ -455,6 +455,12 @@ #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_OFST 84 #define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_LEN 4 +/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2 msgresponse */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_LEN 92 +/* Requester ID used by device for GIC ITS DeviceID */ +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_REQUESTER_DEVICE_ID_OFST 88 +#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_REQUESTER_DEVICE_ID_LEN 4 + /***********************************/ /* * MC_CMD_CDX_BUS_DOWN @@ -616,6 +622,64 @@ #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_LBN 2 #define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_WIDTH 1 +/***********************************/ +/* + * MC_CMD_CDX_DEVICE_WRITE_MSI_MSG + * Populates the MSI message to be used by the hardware to raise the specified + * interrupt vector. Versal-net implementation specific limitations are that + * only 4 CDX devices with MSI interrupt capability are supported and all + * vectors within a device must use the same write address. The command will + * return EINVAL if any of these limitations is violated. + */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG 0x9 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_MSGSET 0x9 +#undef MC_CMD_0x9_PRIVILEGE_CTG + +#define MC_CMD_0x9_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN msgrequest */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_LEN 28 +/* Device bus number, in range 0 to BUS_COUNT-1 */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_BUS_OFST 0 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_BUS_LEN 4 +/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_DEVICE_OFST 4 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_DEVICE_LEN 4 +/* + * Device-relative MSI vector number. Must be < MSI_COUNT reported for the + * device. + */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_VECTOR_OFST 8 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_VECTOR_LEN 4 +/* Reserved (alignment) */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_RESERVED_OFST 12 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_RESERVED_LEN 4 +/* + * MSI address to be used by the hardware. Typically, on ARM systems this + * address is translated by the IOMMU (if enabled) and it is the responsibility + * of the entity managing the IOMMU (APU kernel) to supply the correct IOVA + * here. + */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_OFST 16 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LEN 8 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_OFST 16 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_LEN 4 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_LBN 128 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_LO_WIDTH 32 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_OFST 20 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_LEN 4 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_LBN 160 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS_HI_WIDTH 32 +/* + * MSI data to be used by the hardware. On versal-net, only the lower 16-bits + * are used, the remaining bits are ignored and should be set to zero. + */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_DATA_OFST 24 +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_DATA_LEN 4 + +/* MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_OUT msgresponse */ +#define MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_OUT_LEN 0 + /***********************************/ /* MC_CMD_V2_EXTN - Encapsulation for a v2 extended command */ #define MC_CMD_V2_EXTN 0x7f diff --git a/drivers/cdx/controller/mcdi_functions.c b/drivers/cdx/controller/mcdi_functions.c index b1f530946389..885c69e6ebe5 100644 --- a/drivers/cdx/controller/mcdi_functions.c +++ b/drivers/cdx/controller/mcdi_functions.c @@ -49,7 +49,7 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num, struct cdx_dev_params *dev_params) { - MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN); + MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_LEN); MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_LEN); struct resource *res = &dev_params->res[0]; size_t outlen; @@ -64,7 +64,7 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, if (ret) return ret; - if (outlen != MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN) + if (outlen != MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_LEN) return -EIO; dev_params->bus_num = bus_num; @@ -73,6 +73,9 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, req_id = MCDI_DWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID); dev_params->req_id = req_id; + dev_params->msi_dev_id = MCDI_DWORD(outbuf, + CDX_BUS_GET_DEVICE_CONFIG_OUT_V2_REQUESTER_DEVICE_ID); + dev_params->res_count = 0; if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE) != 0) { res[dev_params->res_count].start = @@ -127,6 +130,7 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx, dev_params->class = MCDI_DWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS) & 0xFFFFFF; dev_params->revision = MCDI_BYTE(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION); + dev_params->num_msi = MCDI_DWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT); return 0; } @@ -155,6 +159,24 @@ int cdx_mcdi_bus_disable(struct cdx_mcdi *cdx, u8 bus_num) return ret; } +int cdx_mcdi_write_msi(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num, + u32 msi_vector, u64 msi_address, u32 msi_data) +{ + MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_DEVICE_WRITE_MSI_MSG_IN_LEN); + int ret; + + MCDI_SET_DWORD(inbuf, CDX_DEVICE_WRITE_MSI_MSG_IN_BUS, bus_num); + MCDI_SET_DWORD(inbuf, CDX_DEVICE_WRITE_MSI_MSG_IN_DEVICE, dev_num); + MCDI_SET_DWORD(inbuf, CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_VECTOR, msi_vector); + MCDI_SET_QWORD(inbuf, CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_ADDRESS, msi_address); + MCDI_SET_DWORD(inbuf, CDX_DEVICE_WRITE_MSI_MSG_IN_MSI_DATA, msi_data); + + ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_DEVICE_WRITE_MSI_MSG, inbuf, sizeof(inbuf), + NULL, 0, NULL); + + return ret; +} + int cdx_mcdi_reset_device(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num) { MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_DEVICE_RESET_IN_LEN); @@ -226,3 +248,10 @@ int cdx_mcdi_bus_master_enable(struct cdx_mcdi *cdx, u8 bus_num, return cdx_mcdi_ctrl_flag_set(cdx, bus_num, dev_num, enable, MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_LBN); } + +int cdx_mcdi_msi_enable(struct cdx_mcdi *cdx, u8 bus_num, + u8 dev_num, bool enable) +{ + return cdx_mcdi_ctrl_flag_set(cdx, bus_num, dev_num, enable, + MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_LBN); +} diff --git a/drivers/cdx/controller/mcdi_functions.h b/drivers/cdx/controller/mcdi_functions.h index 258a5462fbe3..b9942affdc6b 100644 --- a/drivers/cdx/controller/mcdi_functions.h +++ b/drivers/cdx/controller/mcdi_functions.h @@ -65,6 +65,26 @@ int cdx_mcdi_bus_enable(struct cdx_mcdi *cdx, u8 bus_num); */ int cdx_mcdi_bus_disable(struct cdx_mcdi *cdx, u8 bus_num); +/** + * cdx_mcdi_write_msi - Write MSI configuration for CDX device + * @cdx: pointer to MCDI interface. + * @bus_num: Bus number. + * @dev_num: Device number. + * @msi_vector: Device-relative MSI vector number. + * Must be < MSI_COUNT reported for the device. + * @msi_address: MSI address to be used by the hardware. Typically, on ARM + * systems this address is translated by the IOMMU (if enabled) and + * it is the responsibility of the entity managing the IOMMU (APU kernel) + * to supply the correct IOVA here. + * @msi_data: MSI data to be used by the hardware. On versal-net, only the + * lower 16-bits are used, the remaining bits are ignored and should be + * set to zero. + * + * Return: 0 on success, <0 on failure + */ +int cdx_mcdi_write_msi(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num, + u32 msi_vector, u64 msi_address, u32 msi_data); + /** * cdx_mcdi_reset_device - Reset cdx device represented by bus_num:dev_num * @cdx: pointer to MCDI interface. @@ -89,4 +109,17 @@ int cdx_mcdi_reset_device(struct cdx_mcdi *cdx, int cdx_mcdi_bus_master_enable(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num, bool enable); +/** + * cdx_mcdi_msi_enable - Enable/Disable MSIs for cdx device represented + * by bus_num:dev_num + * @cdx: pointer to MCDI interface. + * @bus_num: Bus number. + * @dev_num: Device number. + * @enable: Enable msi's if set, disable otherwise. + * + * Return: 0 on success, <0 on failure + */ +int cdx_mcdi_msi_enable(struct cdx_mcdi *cdx, u8 bus_num, + u8 dev_num, bool enable); + #endif /* CDX_MCDI_FUNCTIONS_H */ diff --git a/include/linux/cdx/cdx_bus.h b/include/linux/cdx/cdx_bus.h index 6355a36a3f81..b57118aaa679 100644 --- a/include/linux/cdx/cdx_bus.h +++ b/include/linux/cdx/cdx_bus.h @@ -12,6 +12,7 @@ #include #include #include +#include #define MAX_CDX_DEV_RESOURCES 4 #define CDX_CONTROLLER_ID_SHIFT 4 @@ -21,13 +22,25 @@ struct cdx_controller; enum { + CDX_DEV_MSI_CONF, CDX_DEV_BUS_MASTER_CONF, CDX_DEV_RESET_CONF, + CDX_DEV_MSI_ENABLE, +}; + +struct cdx_msi_config { + u64 addr; + u32 data; + u16 msi_index; }; struct cdx_device_config { u8 type; - bool bus_master_enable; + union { + struct cdx_msi_config msi; + bool bus_master_enable; + bool msi_enable; + }; }; typedef int (*cdx_bus_enable_cb)(struct cdx_controller *cdx, u8 bus_num); @@ -87,6 +100,7 @@ struct cdx_ops { * struct cdx_controller: CDX controller object * @dev: Linux device associated with the CDX controller. * @priv: private data + * @msi_domain: MSI domain * @id: Controller ID * @controller_registered: controller registered with bus * @ops: CDX controller ops @@ -94,6 +108,7 @@ struct cdx_ops { struct cdx_controller { struct device *dev; void *priv; + struct irq_domain *msi_domain; u32 id; bool controller_registered; struct cdx_ops *ops; @@ -120,9 +135,13 @@ struct cdx_controller { * @req_id: Requestor ID associated with CDX device * @is_bus: Is this bus device * @enabled: is this bus enabled + * @msi_dev_id: MSI Device ID associated with CDX device + * @num_msi: Number of MSI's supported by the device * @driver_override: driver name to force a match; do not set directly, * because core frees it; use driver_set_override() to * set or clear it. + * @irqchip_lock: lock to synchronize irq/msi configuration + * @msi_write_pending: MSI write pending for this device */ struct cdx_device { struct device dev; @@ -144,7 +163,11 @@ struct cdx_device { u32 req_id; bool is_bus; bool enabled; + u32 msi_dev_id; + u32 num_msi; const char *driver_override; + struct mutex irqchip_lock; + bool msi_write_pending; }; #define to_cdx_device(_dev) \ @@ -237,4 +260,32 @@ int cdx_set_master(struct cdx_device *cdx_dev); */ int cdx_clear_master(struct cdx_device *cdx_dev); +#ifdef CONFIG_GENERIC_MSI_IRQ +/** + * cdx_enable_msi - Enable MSI for the CDX device. + * @cdx_dev: device pointer + * + * Return: 0 for success, -errno on failure + */ +int cdx_enable_msi(struct cdx_device *cdx_dev); + +/** + * cdx_disable_msi - Disable MSI for the CDX device. + * @cdx_dev: device pointer + */ +void cdx_disable_msi(struct cdx_device *cdx_dev); + +#else /* CONFIG_GENERIC_MSI_IRQ */ + +static inline int cdx_enable_msi(struct cdx_device *cdx_dev) +{ + return -ENODEV; +} + +static inline void cdx_disable_msi(struct cdx_device *cdx_dev) +{ +} + +#endif /* CONFIG_GENERIC_MSI_IRQ */ + #endif /* _CDX_BUS_H_ */ -- cgit v1.2.3 From 576882ef5e7fce030b65c92b508a0f84ea5a81c2 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Mon, 5 Feb 2024 12:01:37 -0800 Subject: uio: introduce UIO_MEM_DMA_COHERENT type Add a UIO memtype specifically for sharing dma_alloc_coherent memory with userspace, backed by dma_mmap_coherent. This is mainly for the bnx2/bnx2x/bnx2i "cnic" interface, although there are a few other uio drivers which map dma_alloc_coherent memory and will be converted to use dma_mmap_coherent as well. Signed-off-by: Nilesh Javali Signed-off-by: Chris Leech Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20240205200137.138302-1-cleech@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/uio_driver.h | 13 +++++++++++++ 2 files changed, 60 insertions(+) (limited to 'drivers') diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 2d572f6c8ec8..bb77de6fa067 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -24,6 +24,7 @@ #include #include #include +#include #define UIO_MAX_DEVICES (1U << MINORBITS) @@ -759,6 +760,49 @@ static int uio_mmap_physical(struct vm_area_struct *vma) vma->vm_page_prot); } +static int uio_mmap_dma_coherent(struct vm_area_struct *vma) +{ + struct uio_device *idev = vma->vm_private_data; + struct uio_mem *mem; + void *addr; + int ret = 0; + int mi; + + mi = uio_find_mem_index(vma); + if (mi < 0) + return -EINVAL; + + mem = idev->info->mem + mi; + + if (mem->addr & ~PAGE_MASK) + return -ENODEV; + if (mem->dma_addr & ~PAGE_MASK) + return -ENODEV; + if (!mem->dma_device) + return -ENODEV; + if (vma->vm_end - vma->vm_start > mem->size) + return -EINVAL; + + dev_warn(mem->dma_device, + "use of UIO_MEM_DMA_COHERENT is highly discouraged"); + + /* + * UIO uses offset to index into the maps for a device. + * We need to clear vm_pgoff for dma_mmap_coherent. + */ + vma->vm_pgoff = 0; + + addr = (void *)mem->addr; + ret = dma_mmap_coherent(mem->dma_device, + vma, + addr, + mem->dma_addr, + vma->vm_end - vma->vm_start); + vma->vm_pgoff = mi; + + return ret; +} + static int uio_mmap(struct file *filep, struct vm_area_struct *vma) { struct uio_listener *listener = filep->private_data; @@ -806,6 +850,9 @@ static int uio_mmap(struct file *filep, struct vm_area_struct *vma) case UIO_MEM_VIRTUAL: ret = uio_mmap_logical(vma); break; + case UIO_MEM_DMA_COHERENT: + ret = uio_mmap_dma_coherent(vma); + break; default: ret = -EINVAL; } diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 47c5962b876b..18238dc8bfd3 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -28,19 +28,26 @@ struct uio_map; * logical, virtual, or physical & phys_addr_t * should always be large enough to handle any of * the address types) + * @dma_addr: DMA handle set by dma_alloc_coherent, used with + * UIO_MEM_DMA_COHERENT only (@addr should be the + * void * returned from the same dma_alloc_coherent call) * @offs: offset of device memory within the page * @size: size of IO (multiple of page size) * @memtype: type of memory addr points to * @internal_addr: ioremap-ped version of addr, for driver internal use + * @dma_device: device struct that was passed to dma_alloc_coherent, + * used with UIO_MEM_DMA_COHERENT only * @map: for use by the UIO core only. */ struct uio_mem { const char *name; phys_addr_t addr; + dma_addr_t dma_addr; unsigned long offs; resource_size_t size; int memtype; void __iomem *internal_addr; + struct device *dma_device; struct uio_map *map; }; @@ -158,6 +165,12 @@ extern int __must_check #define UIO_MEM_LOGICAL 2 #define UIO_MEM_VIRTUAL 3 #define UIO_MEM_IOVA 4 +/* + * UIO_MEM_DMA_COHERENT exists for legacy drivers that had been getting by with + * improperly mapping DMA coherent allocations through the other modes. + * Do not use in new drivers. + */ +#define UIO_MEM_DMA_COHERENT 5 /* defines for uio_port->porttype */ #define UIO_PORT_NONE 0 -- cgit v1.2.3 From bfe78793b264f9e7a809f755f8ef5cb9bb163827 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Thu, 1 Feb 2024 15:33:58 -0800 Subject: cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT Use the UIO_MEM_DMA_COHERENT type to properly handle mmap for dma_alloc_coherent buffers. The cnic l2_ring and l2_buf mmaps have caused page refcount issues as the dma_alloc_coherent no longer provide __GFP_COMP allocation as per commit "dma-mapping: reject __GFP_COMP in dma_alloc_attrs". Fix this by having the uio device use dma_mmap_coherent. The bnx2 and bnx2x status block allocations are also dma_alloc_coherent, and should use dma_mmap_coherent. They don't allocate multiple pages, but this interface does not work correctly with an iommu enabled unless dma_mmap_coherent is used. Signed-off-by: Nilesh Javali Signed-off-by: Chris Leech Acked-by: Jakub Kicinski Link: https://lore.kernel.org/r/20240201233400.3394996-3-cleech@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/broadcom/bnx2.c | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 ++ drivers/net/ethernet/broadcom/cnic.c | 25 ++++++++++++++++-------- drivers/net/ethernet/broadcom/cnic.h | 1 + drivers/net/ethernet/broadcom/cnic_if.h | 1 + 5 files changed, 22 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 0d917a9699c5..b65b8592ad75 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -367,6 +367,7 @@ static void bnx2_setup_cnic_irq_info(struct bnx2 *bp) cp->irq_arr[0].status_blk = (void *) ((unsigned long) bnapi->status_blk.msi + (BNX2_SBLK_MSIX_ALIGN_SIZE * sb_id)); + cp->irq_arr[0].status_blk_map = bp->status_blk_mapping; cp->irq_arr[0].status_blk_num = sb_id; cp->num_irq = 1; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 0d8e61c63c7c..678829646cec 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -14912,9 +14912,11 @@ void bnx2x_setup_cnic_irq_info(struct bnx2x *bp) else cp->irq_arr[0].status_blk = (void *)bp->cnic_sb.e1x_sb; + cp->irq_arr[0].status_blk_map = bp->cnic_sb_mapping; cp->irq_arr[0].status_blk_num = bnx2x_cnic_fw_sb_id(bp); cp->irq_arr[0].status_blk_num2 = bnx2x_cnic_igu_sb_id(bp); cp->irq_arr[1].status_blk = bp->def_status_blk; + cp->irq_arr[1].status_blk_map = bp->def_status_blk_mapping; cp->irq_arr[1].status_blk_num = DEF_SB_ID; cp->irq_arr[1].status_blk_num2 = DEF_SB_IGU_ID; diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index 7926aaef8f0c..3d63177e7e52 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -1107,10 +1107,11 @@ static int cnic_init_uio(struct cnic_dev *dev) TX_MAX_TSS_RINGS + 1); uinfo->mem[1].addr = (unsigned long) cp->status_blk.gen & CNIC_PAGE_MASK; + uinfo->mem[1].dma_addr = cp->status_blk_map; if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) - uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9; + uinfo->mem[1].size = PAGE_ALIGN(BNX2_SBLK_MSIX_ALIGN_SIZE * 9); else - uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE; + uinfo->mem[1].size = PAGE_ALIGN(BNX2_SBLK_MSIX_ALIGN_SIZE); uinfo->name = "bnx2_cnic"; } else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) { @@ -1118,20 +1119,26 @@ static int cnic_init_uio(struct cnic_dev *dev) uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk & CNIC_PAGE_MASK; - uinfo->mem[1].size = sizeof(*cp->bnx2x_def_status_blk); + uinfo->mem[1].dma_addr = cp->status_blk_map; + uinfo->mem[1].size = PAGE_ALIGN(sizeof(*cp->bnx2x_def_status_blk)); uinfo->name = "bnx2x_cnic"; } - uinfo->mem[1].memtype = UIO_MEM_LOGICAL; + uinfo->mem[1].dma_device = &dev->pcidev->dev; + uinfo->mem[1].memtype = UIO_MEM_DMA_COHERENT; uinfo->mem[2].addr = (unsigned long) udev->l2_ring; - uinfo->mem[2].size = udev->l2_ring_size; - uinfo->mem[2].memtype = UIO_MEM_LOGICAL; + uinfo->mem[2].dma_addr = udev->l2_ring_map; + uinfo->mem[2].size = PAGE_ALIGN(udev->l2_ring_size); + uinfo->mem[2].dma_device = &dev->pcidev->dev; + uinfo->mem[2].memtype = UIO_MEM_DMA_COHERENT; uinfo->mem[3].addr = (unsigned long) udev->l2_buf; - uinfo->mem[3].size = udev->l2_buf_size; - uinfo->mem[3].memtype = UIO_MEM_LOGICAL; + uinfo->mem[3].dma_addr = udev->l2_buf_map; + uinfo->mem[3].size = PAGE_ALIGN(udev->l2_buf_size); + uinfo->mem[3].dma_device = &dev->pcidev->dev; + uinfo->mem[3].memtype = UIO_MEM_DMA_COHERENT; uinfo->version = CNIC_MODULE_VERSION; uinfo->irq = UIO_IRQ_CUSTOM; @@ -1313,6 +1320,7 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev) return 0; cp->bnx2x_def_status_blk = cp->ethdev->irq_arr[1].status_blk; + cp->status_blk_map = cp->ethdev->irq_arr[1].status_blk_map; cp->l2_rx_ring_size = 15; @@ -5323,6 +5331,7 @@ static int cnic_start_hw(struct cnic_dev *dev) pci_dev_get(dev->pcidev); cp->func = PCI_FUNC(dev->pcidev->devfn); cp->status_blk.gen = ethdev->irq_arr[0].status_blk; + cp->status_blk_map = ethdev->irq_arr[0].status_blk_map; cp->status_blk_num = ethdev->irq_arr[0].status_blk_num; err = cp->alloc_resc(dev); diff --git a/drivers/net/ethernet/broadcom/cnic.h b/drivers/net/ethernet/broadcom/cnic.h index 4baea81bae7a..fedc84ada937 100644 --- a/drivers/net/ethernet/broadcom/cnic.h +++ b/drivers/net/ethernet/broadcom/cnic.h @@ -260,6 +260,7 @@ struct cnic_local { #define SM_RX_ID 0 #define SM_TX_ID 1 } status_blk; + dma_addr_t status_blk_map; struct host_sp_status_block *bnx2x_def_status_blk; diff --git a/drivers/net/ethernet/broadcom/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h index 789e5c7e9311..49a11ec80b36 100644 --- a/drivers/net/ethernet/broadcom/cnic_if.h +++ b/drivers/net/ethernet/broadcom/cnic_if.h @@ -190,6 +190,7 @@ struct cnic_ops { struct cnic_irq { unsigned int vector; void *status_blk; + dma_addr_t status_blk_map; u32 status_blk_num; u32 status_blk_num2; u32 irq_flags; -- cgit v1.2.3 From 7722151e4651c973c18df0c18c015edcc7b43b25 Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Thu, 1 Feb 2024 15:33:59 -0800 Subject: uio_pruss: UIO_MEM_DMA_COHERENT conversion Conversion of this driver to use UIO_MEM_DMA_COHERENT for dma_alloc_coherent memory instead of UIO_MEM_PHYS. Signed-off-by: Chris Leech Link: https://lore.kernel.org/r/20240201233400.3394996-4-cleech@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio_pruss.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index 77e2dc404885..72b33f7d4c40 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -191,9 +191,11 @@ static int pruss_probe(struct platform_device *pdev) p->mem[1].size = sram_pool_sz; p->mem[1].memtype = UIO_MEM_PHYS; - p->mem[2].addr = gdev->ddr_paddr; + p->mem[2].addr = (phys_addr_t) gdev->ddr_vaddr; + p->mem[2].dma_addr = gdev->ddr_paddr; p->mem[2].size = extram_pool_sz; - p->mem[2].memtype = UIO_MEM_PHYS; + p->mem[2].memtype = UIO_MEM_DMA_COHERENT; + p->mem[2].dma_device = dev; p->name = devm_kasprintf(dev, GFP_KERNEL, "pruss_evt%d", cnt); p->version = DRV_VERSION; -- cgit v1.2.3 From 019947805a8d703fbb57d607187ff1148bb267ff Mon Sep 17 00:00:00 2001 From: Chris Leech Date: Mon, 5 Feb 2024 12:02:57 -0800 Subject: uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion Conversion of this driver to use UIO_MEM_DMA_COHERENT for dma_alloc_coherent memory instead of UIO_MEM_PHYS. Signed-off-by: Chris Leech Link: https://lore.kernel.org/r/20240205200257.138376-1-cleech@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio_dmem_genirq.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c index 5313307c2754..d5f9384df125 100644 --- a/drivers/uio/uio_dmem_genirq.c +++ b/drivers/uio/uio_dmem_genirq.c @@ -36,7 +36,6 @@ struct uio_dmem_genirq_platdata { struct platform_device *pdev; unsigned int dmem_region_start; unsigned int num_dmem_regions; - void *dmem_region_vaddr[MAX_UIO_MAPS]; struct mutex alloc_lock; unsigned int refcnt; }; @@ -50,7 +49,6 @@ static int uio_dmem_genirq_open(struct uio_info *info, struct inode *inode) { struct uio_dmem_genirq_platdata *priv = info->priv; struct uio_mem *uiomem; - int dmem_region = priv->dmem_region_start; uiomem = &priv->uioinfo->mem[priv->dmem_region_start]; @@ -61,11 +59,8 @@ static int uio_dmem_genirq_open(struct uio_info *info, struct inode *inode) break; addr = dma_alloc_coherent(&priv->pdev->dev, uiomem->size, - (dma_addr_t *)&uiomem->addr, GFP_KERNEL); - if (!addr) { - uiomem->addr = DMEM_MAP_ERROR; - } - priv->dmem_region_vaddr[dmem_region++] = addr; + &uiomem->dma_addr, GFP_KERNEL); + uiomem->addr = addr ? (phys_addr_t) addr : DMEM_MAP_ERROR; ++uiomem; } priv->refcnt++; @@ -80,7 +75,6 @@ static int uio_dmem_genirq_release(struct uio_info *info, struct inode *inode) { struct uio_dmem_genirq_platdata *priv = info->priv; struct uio_mem *uiomem; - int dmem_region = priv->dmem_region_start; /* Tell the Runtime PM code that the device has become idle */ pm_runtime_put_sync(&priv->pdev->dev); @@ -93,13 +87,12 @@ static int uio_dmem_genirq_release(struct uio_info *info, struct inode *inode) while (!priv->refcnt && uiomem < &priv->uioinfo->mem[MAX_UIO_MAPS]) { if (!uiomem->size) break; - if (priv->dmem_region_vaddr[dmem_region]) { - dma_free_coherent(&priv->pdev->dev, uiomem->size, - priv->dmem_region_vaddr[dmem_region], - uiomem->addr); + if (uiomem->addr) { + dma_free_coherent(uiomem->dma_device, uiomem->size, + (void *) uiomem->addr, + uiomem->dma_addr); } uiomem->addr = DMEM_MAP_ERROR; - ++dmem_region; ++uiomem; } @@ -264,7 +257,8 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev) " dynamic and fixed memory regions.\n"); break; } - uiomem->memtype = UIO_MEM_PHYS; + uiomem->memtype = UIO_MEM_DMA_COHERENT; + uiomem->dma_device = &pdev->dev; uiomem->addr = DMEM_MAP_ERROR; uiomem->size = pdata->dynamic_region_sizes[i]; ++uiomem; -- cgit v1.2.3 From 367b3560e10bbae3660d8ba4d0a7cc92170d8398 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 7 Mar 2024 22:15:05 +0000 Subject: binder: remove redundant variable page_addr Variable page_addr is being assigned a value that is never read. The variable is redundant and can be removed. Cleans up clang scan build warning: warning: Value stored to 'page_addr' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Fixes: 162c79731448 ("binder: avoid user addresses in debug logs") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312060851.cudv98wG-lkp@intel.com/ Acked-by: Carlos Llamas Link: https://lore.kernel.org/r/20240307221505.101431-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder_alloc.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index e0e4dc38b692..2e1f261ec5c8 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -925,7 +925,6 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc) int i; for (i = 0; i < alloc->buffer_size / PAGE_SIZE; i++) { - unsigned long page_addr; bool on_lru; if (!alloc->pages[i].page_ptr) @@ -933,7 +932,6 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc) on_lru = list_lru_del_obj(&binder_freelist, &alloc->pages[i].lru); - page_addr = alloc->buffer + i * PAGE_SIZE; binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC, "%s: %d: page %d %s\n", __func__, alloc->pid, i, -- cgit v1.2.3