From c5f3d544a7f29b16de37c10f51b38c4b7ad31804 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Thu, 18 Jun 2015 18:33:46 +0530 Subject: i2c: parport: use dev_* Now parport is using device model so use dev_* macros instead of printk. Signed-off-by: Sudip Mukherjee Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-parport.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 9b94c3db80ab..3794f7d18442 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -215,7 +215,8 @@ static void i2c_parport_attach(struct parport *port) adapter->adapter.dev.parent = port->physport->dev; if (parport_claim_or_block(adapter->pdev) < 0) { - printk(KERN_ERR "i2c-parport: Could not claim parallel port\n"); + dev_err(&adapter->pdev->dev, + "Could not claim parallel port\n"); goto err_unregister; } @@ -230,7 +231,7 @@ static void i2c_parport_attach(struct parport *port) } if (i2c_bit_add_bus(&adapter->adapter) < 0) { - printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); + dev_err(&adapter->pdev->dev, "Unable to register with I2C\n"); goto err_unregister; } @@ -242,8 +243,8 @@ static void i2c_parport_attach(struct parport *port) if (adapter->ara) parport_enable_irq(port); else - printk(KERN_WARNING "i2c-parport: Failed to register " - "ARA client\n"); + dev_warn(&adapter->pdev->dev, + "Failed to register ARA client\n"); } /* Add the new adapter to the list */ -- cgit v1.2.3 From 20226118bceed7b432f4bc5bae34c1c160689bf7 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Thu, 18 Jun 2015 18:33:47 +0530 Subject: i2c: parport: start using pr_fmt Start using pr_fmt and convert all remaining printk to use pr_* family of macros. Signed-off-by: Sudip Mukherjee [wsa: remove print on kzalloc failure] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-parport.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 3794f7d18442..a8e54df4aed6 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -20,6 +20,8 @@ GNU General Public License for more details. * ------------------------------------------------------------------------ */ +#define pr_fmt(fmt) "i2c-parport: " fmt + #include #include #include @@ -176,26 +178,24 @@ static void i2c_parport_attach(struct parport *port) break; } if (i == MAX_DEVICE) { - pr_debug("i2c-parport: Not using parport%d.\n", port->number); + pr_debug("Not using parport%d.\n", port->number); return; } adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL); - if (adapter == NULL) { - printk(KERN_ERR "i2c-parport: Failed to kzalloc\n"); + if (!adapter) return; - } memset(&i2c_parport_cb, 0, sizeof(i2c_parport_cb)); i2c_parport_cb.flags = PARPORT_FLAG_EXCL; i2c_parport_cb.irq_func = i2c_parport_irq; i2c_parport_cb.private = adapter; - pr_debug("i2c-parport: attaching to %s\n", port->name); + pr_debug("attaching to %s\n", port->name); parport_disable_irq(port); adapter->pdev = parport_register_dev_model(port, "i2c-parport", &i2c_parport_cb, i); if (!adapter->pdev) { - printk(KERN_ERR "i2c-parport: Unable to register with parport\n"); + pr_err("Unable to register with parport\n"); goto err_free; } @@ -299,12 +299,12 @@ static struct parport_driver i2c_parport_driver = { static int __init i2c_parport_init(void) { if (type < 0) { - printk(KERN_WARNING "i2c-parport: adapter type unspecified\n"); + pr_warn("adapter type unspecified\n"); return -ENODEV; } if (type >= ARRAY_SIZE(adapter_parm)) { - printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type); + pr_warn("invalid type (%d)\n", type); return -ENODEV; } -- cgit v1.2.3 From c680e3291857216465714ba1d3336befaa5b4725 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 13 Jul 2015 15:38:02 -0500 Subject: i2c: omap: switch to dev_get_drvdata() there's no need to fetch the platform_device in order to dereference it back to the dev pointer to access drvdata, we can use dev_get_drvdata() instead. Signed-off-by: Felipe Balbi Acked-by: Alexander Sverdlin Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index fc9bf7f30e35..ce34f431a3ac 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1476,8 +1476,7 @@ static int omap_i2c_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int omap_i2c_runtime_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct omap_i2c_dev *_dev = platform_get_drvdata(pdev); + struct omap_i2c_dev *_dev = dev_get_drvdata(dev); _dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG); @@ -1503,8 +1502,7 @@ static int omap_i2c_runtime_suspend(struct device *dev) static int omap_i2c_runtime_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct omap_i2c_dev *_dev = platform_get_drvdata(pdev); + struct omap_i2c_dev *_dev = dev_get_drvdata(dev); pinctrl_pm_select_default_state(dev); -- cgit v1.2.3 From 63f8f85625fa726bdf28862dd4d2e1bf3d230bb8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 13 Jul 2015 15:38:03 -0500 Subject: i2c: omap: abolish variable name confusion struct device pointers are usually called dev. Calling our struct omap_i2c_dev pointers also dev has caused enough confusion. This is the result of a few simple sed rules to convert all struct omap_i2c_dev pointers to be called omap instead. Signed-off-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 598 +++++++++++++++++++++--------------------- 1 file changed, 299 insertions(+), 299 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index ce34f431a3ac..e359ad39753b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -270,35 +270,35 @@ static const u8 reg_map_ip_v2[] = { [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30, }; -static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev, +static inline void omap_i2c_write_reg(struct omap_i2c_dev *omap, int reg, u16 val) { - writew_relaxed(val, i2c_dev->base + - (i2c_dev->regs[reg] << i2c_dev->reg_shift)); + writew_relaxed(val, omap->base + + (omap->regs[reg] << omap->reg_shift)); } -static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) +static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *omap, int reg) { - return readw_relaxed(i2c_dev->base + - (i2c_dev->regs[reg] << i2c_dev->reg_shift)); + return readw_relaxed(omap->base + + (omap->regs[reg] << omap->reg_shift)); } -static void __omap_i2c_init(struct omap_i2c_dev *dev) +static void __omap_i2c_init(struct omap_i2c_dev *omap) { - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ - omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate); + omap_i2c_write_reg(omap, OMAP_I2C_PSC_REG, omap->pscstate); /* SCL low and high time values */ - omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); - omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate); - if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) - omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate); + omap_i2c_write_reg(omap, OMAP_I2C_SCLL_REG, omap->scllstate); + omap_i2c_write_reg(omap, OMAP_I2C_SCLH_REG, omap->sclhstate); + if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) + omap_i2c_write_reg(omap, OMAP_I2C_WE_REG, omap->westate); /* Take the I2C module out of reset: */ - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); /* * NOTE: right after setting CON_EN, STAT_BB could be 0 while the @@ -310,32 +310,32 @@ static void __omap_i2c_init(struct omap_i2c_dev *dev) * Don't write to this register if the IE state is 0 as it can * cause deadlock. */ - if (dev->iestate) - omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); + if (omap->iestate) + omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, omap->iestate); } -static int omap_i2c_reset(struct omap_i2c_dev *dev) +static int omap_i2c_reset(struct omap_i2c_dev *omap) { unsigned long timeout; u16 sysc; - if (dev->rev >= OMAP_I2C_OMAP1_REV_2) { - sysc = omap_i2c_read_reg(dev, OMAP_I2C_SYSC_REG); + if (omap->rev >= OMAP_I2C_OMAP1_REV_2) { + sysc = omap_i2c_read_reg(omap, OMAP_I2C_SYSC_REG); /* Disable I2C controller before soft reset */ - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, - omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) & + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, + omap_i2c_read_reg(omap, OMAP_I2C_CON_REG) & ~(OMAP_I2C_CON_EN)); - omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); + omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ timeout = jiffies + OMAP_I2C_TIMEOUT; - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); - while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) & + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); + while (!(omap_i2c_read_reg(omap, OMAP_I2C_SYSS_REG) & SYSS_RESETDONE_MASK)) { if (time_after(jiffies, timeout)) { - dev_warn(dev->dev, "timeout waiting " + dev_warn(omap->dev, "timeout waiting " "for controller reset\n"); return -ETIMEDOUT; } @@ -343,18 +343,18 @@ static int omap_i2c_reset(struct omap_i2c_dev *dev) } /* SYSC register is cleared by the reset; rewrite it */ - omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, sysc); + omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, sysc); - if (dev->rev > OMAP_I2C_REV_ON_3430_3530) { + if (omap->rev > OMAP_I2C_REV_ON_3430_3530) { /* Schedule I2C-bus monitoring on the next transfer */ - dev->bb_valid = 0; + omap->bb_valid = 0; } } return 0; } -static int omap_i2c_init(struct omap_i2c_dev *dev) +static int omap_i2c_init(struct omap_i2c_dev *omap) { u16 psc = 0, scll = 0, sclh = 0; u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0; @@ -362,23 +362,23 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) unsigned long internal_clk = 0; struct clk *fclk; - if (dev->rev >= OMAP_I2C_REV_ON_3430_3530) { + if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) { /* * Enabling all wakup sources to stop I2C freezing on * WFI instruction. * REVISIT: Some wkup sources might not be needed. */ - dev->westate = OMAP_I2C_WE_ALL; + omap->westate = OMAP_I2C_WE_ALL; } - if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) { + if (omap->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) { /* * The I2C functional clock is the armxor_ck, so there's * no need to get "armxor_ck" separately. Now, if OMAP2420 * always returns 12MHz for the functional clock, we can * do this bit unconditionally. */ - fclk = clk_get(dev->dev, "fck"); + fclk = clk_get(omap->dev, "fck"); fclk_rate = clk_get_rate(fclk); clk_put(fclk); @@ -395,7 +395,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) psc = fclk_rate / 12000000; } - if (!(dev->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) { + if (!(omap->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) { /* * HSI2C controller internal clk rate should be 19.2 Mhz for @@ -403,14 +403,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) * to get longer filter period for better noise suppression. * The filter is iclk (fclk for HS) period. */ - if (dev->speed > 400 || - dev->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK) + if (omap->speed > 400 || + omap->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK) internal_clk = 19200; - else if (dev->speed > 100) + else if (omap->speed > 100) internal_clk = 9600; else internal_clk = 4000; - fclk = clk_get(dev->dev, "fck"); + fclk = clk_get(omap->dev, "fck"); fclk_rate = clk_get_rate(fclk) / 1000; clk_put(fclk); @@ -419,7 +419,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) psc = psc - 1; /* If configured for High Speed */ - if (dev->speed > 400) { + if (omap->speed > 400) { unsigned long scl; /* For first phase of HS mode */ @@ -428,20 +428,20 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) fssclh = (scl / 3) - 5; /* For second phase of HS mode */ - scl = fclk_rate / dev->speed; + scl = fclk_rate / omap->speed; hsscll = scl - (scl / 3) - 7; hssclh = (scl / 3) - 5; - } else if (dev->speed > 100) { + } else if (omap->speed > 100) { unsigned long scl; /* Fast mode */ - scl = internal_clk / dev->speed; + scl = internal_clk / omap->speed; fsscll = scl - (scl / 3) - 7; fssclh = (scl / 3) - 5; } else { /* Standard mode */ - fsscll = internal_clk / (dev->speed * 2) - 7; - fssclh = internal_clk / (dev->speed * 2) - 5; + fsscll = internal_clk / (omap->speed * 2) - 7; + fssclh = internal_clk / (omap->speed * 2) - 5; } scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll; sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh; @@ -450,25 +450,25 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) fclk_rate /= (psc + 1) * 1000; if (psc > 2) psc = 2; - scll = fclk_rate / (dev->speed * 2) - 7 + psc; - sclh = fclk_rate / (dev->speed * 2) - 7 + psc; + scll = fclk_rate / (omap->speed * 2) - 7 + psc; + sclh = fclk_rate / (omap->speed * 2) - 7 + psc; } - dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | + omap->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | - OMAP_I2C_IE_AL) | ((dev->fifo_size) ? + OMAP_I2C_IE_AL) | ((omap->fifo_size) ? (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0); - dev->pscstate = psc; - dev->scllstate = scll; - dev->sclhstate = sclh; + omap->pscstate = psc; + omap->scllstate = scll; + omap->sclhstate = sclh; - if (dev->rev <= OMAP_I2C_REV_ON_3430_3530) { + if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) { /* Not implemented */ - dev->bb_valid = 1; + omap->bb_valid = 1; } - __omap_i2c_init(dev); + __omap_i2c_init(omap); return 0; } @@ -476,14 +476,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) /* * Waiting on Bus Busy */ -static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev) +static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap) { unsigned long timeout; timeout = jiffies + OMAP_I2C_TIMEOUT; - while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) { + while (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) { if (time_after(jiffies, timeout)) - return i2c_recover_bus(&dev->adapter); + return i2c_recover_bus(&omap->adapter); msleep(1); } @@ -518,19 +518,19 @@ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev) * 3. Any transfer started in the middle of another master's transfer * results in unpredictable results and data corruption */ -static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *dev) +static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *omap) { unsigned long bus_free_timeout = 0; unsigned long timeout; int bus_free = 0; u16 stat, systest; - if (dev->bb_valid) + if (omap->bb_valid) return 0; timeout = jiffies + OMAP_I2C_TIMEOUT; while (1) { - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); /* * We will see BB or BF event in a case IP had detected any * activity on the I2C bus. Now IP correctly tracks the bus @@ -543,7 +543,7 @@ static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *dev) * Otherwise, we must look signals on the bus to make * the right decision. */ - systest = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG); + systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG); if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) && (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC)) { if (!bus_free) { @@ -564,22 +564,22 @@ static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *dev) } if (time_after(jiffies, timeout)) { - dev_warn(dev->dev, "timeout waiting for bus ready\n"); + dev_warn(omap->dev, "timeout waiting for bus ready\n"); return -ETIMEDOUT; } msleep(1); } - dev->bb_valid = 1; + omap->bb_valid = 1; return 0; } -static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) +static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx) { u16 buf; - if (dev->flags & OMAP_I2C_FLAG_NO_FIFO) + if (omap->flags & OMAP_I2C_FLAG_NO_FIFO) return; /* @@ -589,29 +589,29 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) * then we might use draining feature to transfer the remaining bytes. */ - dev->threshold = clamp(size, (u8) 1, dev->fifo_size); + omap->threshold = clamp(size, (u8) 1, omap->fifo_size); - buf = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); + buf = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG); if (is_rx) { /* Clear RX Threshold */ buf &= ~(0x3f << 8); - buf |= ((dev->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR; + buf |= ((omap->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR; } else { /* Clear TX Threshold */ buf &= ~0x3f; - buf |= (dev->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR; + buf |= (omap->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR; } - omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf); + omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, buf); - if (dev->rev < OMAP_I2C_REV_ON_3630) - dev->b_hw = 1; /* Enable hardware fixes */ + if (omap->rev < OMAP_I2C_REV_ON_3630) + omap->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - if (dev->set_mpu_wkup_lat != NULL) - dev->latency = (1000000 * dev->threshold) / - (1000 * dev->speed / 8); + if (omap->set_mpu_wkup_lat != NULL) + omap->latency = (1000000 * omap->threshold) / + (1000 * omap->speed / 8); } /* @@ -620,42 +620,42 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx) static int omap_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { - struct omap_i2c_dev *dev = i2c_get_adapdata(adap); + struct omap_i2c_dev *omap = i2c_get_adapdata(adap); unsigned long timeout; u16 w; - dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", + dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); if (msg->len == 0) return -EINVAL; - dev->receiver = !!(msg->flags & I2C_M_RD); - omap_i2c_resize_fifo(dev, msg->len, dev->receiver); + omap->receiver = !!(msg->flags & I2C_M_RD); + omap_i2c_resize_fifo(omap, msg->len, omap->receiver); - omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr); + omap_i2c_write_reg(omap, OMAP_I2C_SA_REG, msg->addr); /* REVISIT: Could the STB bit of I2C_CON be used with probing? */ - dev->buf = msg->buf; - dev->buf_len = msg->len; + omap->buf = msg->buf; + omap->buf_len = msg->len; - /* make sure writes to dev->buf_len are ordered */ + /* make sure writes to omap->buf_len are ordered */ barrier(); - omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); + omap_i2c_write_reg(omap, OMAP_I2C_CNT_REG, omap->buf_len); /* Clear the FIFO Buffers */ - w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); + w = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG); w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; - omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w); + omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, w); - reinit_completion(&dev->cmd_complete); - dev->cmd_err = 0; + reinit_completion(&omap->cmd_complete); + omap->cmd_err = 0; w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; /* High speed configuration */ - if (dev->speed > 400) + if (omap->speed > 400) w |= OMAP_I2C_CON_OPMODE_HS; if (msg->flags & I2C_M_STOP) @@ -665,27 +665,27 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, if (!(msg->flags & I2C_M_RD)) w |= OMAP_I2C_CON_TRX; - if (!dev->b_hw && stop) + if (!omap->b_hw && stop) w |= OMAP_I2C_CON_STP; /* * NOTE: STAT_BB bit could became 1 here if another master occupy * the bus. IP successfully complete transfer when the bus will be * free again (BB reset to 0). */ - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w); /* * Don't write stt and stp together on some hardware. */ - if (dev->b_hw && stop) { + if (omap->b_hw && stop) { unsigned long delay = jiffies + OMAP_I2C_TIMEOUT; - u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + u16 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); while (con & OMAP_I2C_CON_STT) { - con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); /* Let the user know if i2c is in a bad state */ if (time_after(jiffies, delay)) { - dev_err(dev->dev, "controller timed out " + dev_err(omap->dev, "controller timed out " "waiting for start condition to finish\n"); return -ETIMEDOUT; } @@ -694,42 +694,42 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, w |= OMAP_I2C_CON_STP; w &= ~OMAP_I2C_CON_STT; - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w); } /* * REVISIT: We should abort the transfer on signals, but the bus goes * into arbitration and we're currently unable to recover from it. */ - timeout = wait_for_completion_timeout(&dev->cmd_complete, + timeout = wait_for_completion_timeout(&omap->cmd_complete, OMAP_I2C_TIMEOUT); if (timeout == 0) { - dev_err(dev->dev, "controller timed out\n"); - omap_i2c_reset(dev); - __omap_i2c_init(dev); + dev_err(omap->dev, "controller timed out\n"); + omap_i2c_reset(omap); + __omap_i2c_init(omap); return -ETIMEDOUT; } - if (likely(!dev->cmd_err)) + if (likely(!omap->cmd_err)) return 0; /* We have an error */ - if (dev->cmd_err & (OMAP_I2C_STAT_ROVR | OMAP_I2C_STAT_XUDF)) { - omap_i2c_reset(dev); - __omap_i2c_init(dev); + if (omap->cmd_err & (OMAP_I2C_STAT_ROVR | OMAP_I2C_STAT_XUDF)) { + omap_i2c_reset(omap); + __omap_i2c_init(omap); return -EIO; } - if (dev->cmd_err & OMAP_I2C_STAT_AL) + if (omap->cmd_err & OMAP_I2C_STAT_AL) return -EAGAIN; - if (dev->cmd_err & OMAP_I2C_STAT_NACK) { + if (omap->cmd_err & OMAP_I2C_STAT_NACK) { if (msg->flags & I2C_M_IGNORE_NAK) return 0; - w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + w = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); w |= OMAP_I2C_CON_STP; - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w); return -EREMOTEIO; } return -EIO; @@ -743,24 +743,24 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, static int omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { - struct omap_i2c_dev *dev = i2c_get_adapdata(adap); + struct omap_i2c_dev *omap = i2c_get_adapdata(adap); int i; int r; - r = pm_runtime_get_sync(dev->dev); + r = pm_runtime_get_sync(omap->dev); if (r < 0) goto out; - r = omap_i2c_wait_for_bb_valid(dev); + r = omap_i2c_wait_for_bb_valid(omap); if (r < 0) goto out; - r = omap_i2c_wait_for_bb(dev); + r = omap_i2c_wait_for_bb(omap); if (r < 0) goto out; - if (dev->set_mpu_wkup_lat != NULL) - dev->set_mpu_wkup_lat(dev->dev, dev->latency); + if (omap->set_mpu_wkup_lat != NULL) + omap->set_mpu_wkup_lat(omap->dev, omap->latency); for (i = 0; i < num; i++) { r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1))); @@ -771,14 +771,14 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) if (r == 0) r = num; - omap_i2c_wait_for_bb(dev); + omap_i2c_wait_for_bb(omap); - if (dev->set_mpu_wkup_lat != NULL) - dev->set_mpu_wkup_lat(dev->dev, -1); + if (omap->set_mpu_wkup_lat != NULL) + omap->set_mpu_wkup_lat(omap->dev, -1); out: - pm_runtime_mark_last_busy(dev->dev); - pm_runtime_put_autosuspend(dev->dev); + pm_runtime_mark_last_busy(omap->dev); + pm_runtime_put_autosuspend(omap->dev); return r; } @@ -790,19 +790,19 @@ omap_i2c_func(struct i2c_adapter *adap) } static inline void -omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err) +omap_i2c_complete_cmd(struct omap_i2c_dev *omap, u16 err) { - dev->cmd_err |= err; - complete(&dev->cmd_complete); + omap->cmd_err |= err; + complete(&omap->cmd_complete); } static inline void -omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat) +omap_i2c_ack_stat(struct omap_i2c_dev *omap, u16 stat) { - omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); + omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, stat); } -static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat) +static inline void i2c_omap_errata_i207(struct omap_i2c_dev *omap, u16 stat) { /* * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8) @@ -813,17 +813,17 @@ static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat) */ if (stat & OMAP_I2C_STAT_RDR) { /* Step 1: If RDR is set, clear it */ - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); /* Step 2: */ - if (!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) + if (!(omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB)) { /* Step 3: */ - if (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) + if (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_RDR) { - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); - dev_dbg(dev->dev, "RDR when bus is busy.\n"); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); + dev_dbg(omap->dev, "RDR when bus is busy.\n"); } } @@ -836,50 +836,50 @@ static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat) static irqreturn_t omap_i2c_omap1_isr(int this_irq, void *dev_id) { - struct omap_i2c_dev *dev = dev_id; + struct omap_i2c_dev *omap = dev_id; u16 iv, w; - if (pm_runtime_suspended(dev->dev)) + if (pm_runtime_suspended(omap->dev)) return IRQ_NONE; - iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); + iv = omap_i2c_read_reg(omap, OMAP_I2C_IV_REG); switch (iv) { case 0x00: /* None */ break; case 0x01: /* Arbitration lost */ - dev_err(dev->dev, "Arbitration lost\n"); - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL); + dev_err(omap->dev, "Arbitration lost\n"); + omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_AL); break; case 0x02: /* No acknowledgement */ - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK); - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP); + omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_NACK); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP); break; case 0x03: /* Register access ready */ - omap_i2c_complete_cmd(dev, 0); + omap_i2c_complete_cmd(omap, 0); break; case 0x04: /* Receive data ready */ - if (dev->buf_len) { - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - *dev->buf++ = w; - dev->buf_len--; - if (dev->buf_len) { - *dev->buf++ = w >> 8; - dev->buf_len--; + if (omap->buf_len) { + w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG); + *omap->buf++ = w; + omap->buf_len--; + if (omap->buf_len) { + *omap->buf++ = w >> 8; + omap->buf_len--; } } else - dev_err(dev->dev, "RRDY IRQ while no data requested\n"); + dev_err(omap->dev, "RRDY IRQ while no data requested\n"); break; case 0x05: /* Transmit data ready */ - if (dev->buf_len) { - w = *dev->buf++; - dev->buf_len--; - if (dev->buf_len) { - w |= *dev->buf++ << 8; - dev->buf_len--; + if (omap->buf_len) { + w = *omap->buf++; + omap->buf_len--; + if (omap->buf_len) { + w |= *omap->buf++ << 8; + omap->buf_len--; } - omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); + omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w); } else - dev_err(dev->dev, "XRDY IRQ while no data to send\n"); + dev_err(omap->dev, "XRDY IRQ while no data to send\n"); break; default: return IRQ_NONE; @@ -896,28 +896,28 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id) * data to DATA_REG. Otherwise some data bytes can be lost while transferring * them from the memory to the I2C interface. */ -static int errata_omap3_i462(struct omap_i2c_dev *dev) +static int errata_omap3_i462(struct omap_i2c_dev *omap) { unsigned long timeout = 10000; u16 stat; do { - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); if (stat & OMAP_I2C_STAT_XUDF) break; if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { - omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_XRDY | + omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); if (stat & OMAP_I2C_STAT_NACK) { - dev->cmd_err |= OMAP_I2C_STAT_NACK; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + omap->cmd_err |= OMAP_I2C_STAT_NACK; + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK); } if (stat & OMAP_I2C_STAT_AL) { - dev_err(dev->dev, "Arbitration lost\n"); - dev->cmd_err |= OMAP_I2C_STAT_AL; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); + dev_err(omap->dev, "Arbitration lost\n"); + omap->cmd_err |= OMAP_I2C_STAT_AL; + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL); } return -EIO; @@ -927,61 +927,61 @@ static int errata_omap3_i462(struct omap_i2c_dev *dev) } while (--timeout); if (!timeout) { - dev_err(dev->dev, "timeout waiting on XUDF bit\n"); + dev_err(omap->dev, "timeout waiting on XUDF bit\n"); return 0; } return 0; } -static void omap_i2c_receive_data(struct omap_i2c_dev *dev, u8 num_bytes, +static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes, bool is_rdr) { u16 w; while (num_bytes--) { - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - *dev->buf++ = w; - dev->buf_len--; + w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG); + *omap->buf++ = w; + omap->buf_len--; /* * Data reg in 2430, omap3 and * omap4 is 8 bit wide */ - if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { - *dev->buf++ = w >> 8; - dev->buf_len--; + if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { + *omap->buf++ = w >> 8; + omap->buf_len--; } } } -static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes, +static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes, bool is_xdr) { u16 w; while (num_bytes--) { - w = *dev->buf++; - dev->buf_len--; + w = *omap->buf++; + omap->buf_len--; /* * Data reg in 2430, omap3 and * omap4 is 8 bit wide */ - if (dev->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { - w |= *dev->buf++ << 8; - dev->buf_len--; + if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) { + w |= *omap->buf++ << 8; + omap->buf_len--; } - if (dev->errata & I2C_OMAP_ERRATA_I462) { + if (omap->errata & I2C_OMAP_ERRATA_I462) { int ret; - ret = errata_omap3_i462(dev); + ret = errata_omap3_i462(omap); if (ret < 0) return ret; } - omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); + omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w); } return 0; @@ -990,19 +990,19 @@ static int omap_i2c_transmit_data(struct omap_i2c_dev *dev, u8 num_bytes, static irqreturn_t omap_i2c_isr(int irq, void *dev_id) { - struct omap_i2c_dev *dev = dev_id; + struct omap_i2c_dev *omap = dev_id; irqreturn_t ret = IRQ_HANDLED; u16 mask; u16 stat; - spin_lock(&dev->lock); - mask = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + spin_lock(&omap->lock); + mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); + stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); if (stat & mask) ret = IRQ_WAKE_THREAD; - spin_unlock(&dev->lock); + spin_unlock(&omap->lock); return ret; } @@ -1010,20 +1010,20 @@ omap_i2c_isr(int irq, void *dev_id) static irqreturn_t omap_i2c_isr_thread(int this_irq, void *dev_id) { - struct omap_i2c_dev *dev = dev_id; + struct omap_i2c_dev *omap = dev_id; unsigned long flags; u16 bits; u16 stat; int err = 0, count = 0; - spin_lock_irqsave(&dev->lock, flags); + spin_lock_irqsave(&omap->lock, flags); do { - bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); + stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); stat &= bits; /* If we're in receiver mode, ignore XDR/XRDY */ - if (dev->receiver) + if (omap->receiver) stat &= ~(OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_XRDY); else stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY); @@ -1033,32 +1033,32 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) goto out; } - dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat); + dev_dbg(omap->dev, "IRQ (ISR = 0x%04x)\n", stat); if (count++ == 100) { - dev_warn(dev->dev, "Too much work in one IRQ\n"); + dev_warn(omap->dev, "Too much work in one IRQ\n"); break; } if (stat & OMAP_I2C_STAT_NACK) { err |= OMAP_I2C_STAT_NACK; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK); } if (stat & OMAP_I2C_STAT_AL) { - dev_err(dev->dev, "Arbitration lost\n"); + dev_err(omap->dev, "Arbitration lost\n"); err |= OMAP_I2C_STAT_AL; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL); } /* * ProDB0017052: Clear ARDY bit twice */ if (stat & OMAP_I2C_STAT_ARDY) - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ARDY); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ARDY); if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { - omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | + omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR | @@ -1069,28 +1069,28 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) if (stat & OMAP_I2C_STAT_RDR) { u8 num_bytes = 1; - if (dev->fifo_size) - num_bytes = dev->buf_len; + if (omap->fifo_size) + num_bytes = omap->buf_len; - if (dev->errata & I2C_OMAP_ERRATA_I207) { - i2c_omap_errata_i207(dev, stat); - num_bytes = (omap_i2c_read_reg(dev, + if (omap->errata & I2C_OMAP_ERRATA_I207) { + i2c_omap_errata_i207(omap, stat); + num_bytes = (omap_i2c_read_reg(omap, OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F; } - omap_i2c_receive_data(dev, num_bytes, true); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR); + omap_i2c_receive_data(omap, num_bytes, true); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); continue; } if (stat & OMAP_I2C_STAT_RRDY) { u8 num_bytes = 1; - if (dev->threshold) - num_bytes = dev->threshold; + if (omap->threshold) + num_bytes = omap->threshold; - omap_i2c_receive_data(dev, num_bytes, false); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); + omap_i2c_receive_data(omap, num_bytes, false); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RRDY); continue; } @@ -1098,14 +1098,14 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) u8 num_bytes = 1; int ret; - if (dev->fifo_size) - num_bytes = dev->buf_len; + if (omap->fifo_size) + num_bytes = omap->buf_len; - ret = omap_i2c_transmit_data(dev, num_bytes, true); + ret = omap_i2c_transmit_data(omap, num_bytes, true); if (ret < 0) break; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XDR); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XDR); continue; } @@ -1113,36 +1113,36 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) u8 num_bytes = 1; int ret; - if (dev->threshold) - num_bytes = dev->threshold; + if (omap->threshold) + num_bytes = omap->threshold; - ret = omap_i2c_transmit_data(dev, num_bytes, false); + ret = omap_i2c_transmit_data(omap, num_bytes, false); if (ret < 0) break; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XRDY); continue; } if (stat & OMAP_I2C_STAT_ROVR) { - dev_err(dev->dev, "Receive overrun\n"); + dev_err(omap->dev, "Receive overrun\n"); err |= OMAP_I2C_STAT_ROVR; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ROVR); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ROVR); break; } if (stat & OMAP_I2C_STAT_XUDF) { - dev_err(dev->dev, "Transmit underflow\n"); + dev_err(omap->dev, "Transmit underflow\n"); err |= OMAP_I2C_STAT_XUDF; - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XUDF); + omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XUDF); break; } } while (stat); - omap_i2c_complete_cmd(dev, err); + omap_i2c_complete_cmd(omap, err); out: - spin_unlock_irqrestore(&dev->lock, flags); + spin_unlock_irqrestore(&omap->lock, flags); return IRQ_HANDLED; } @@ -1284,7 +1284,7 @@ static struct i2c_bus_recovery_info omap_i2c_bus_recovery_info = { static int omap_i2c_probe(struct platform_device *pdev) { - struct omap_i2c_dev *dev; + struct omap_i2c_dev *omap; struct i2c_adapter *adap; struct resource *mem; const struct omap_i2c_bus_platform_data *pdata = @@ -1302,47 +1302,47 @@ omap_i2c_probe(struct platform_device *pdev) return irq; } - dev = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL); - if (!dev) + omap = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL); + if (!omap) return -ENOMEM; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dev->base = devm_ioremap_resource(&pdev->dev, mem); - if (IS_ERR(dev->base)) - return PTR_ERR(dev->base); + omap->base = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(omap->base)) + return PTR_ERR(omap->base); match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); if (match) { u32 freq = 100000; /* default to 100000 Hz */ pdata = match->data; - dev->flags = pdata->flags; + omap->flags = pdata->flags; of_property_read_u32(node, "clock-frequency", &freq); /* convert DT freq value in Hz into kHz for speed */ - dev->speed = freq / 1000; + omap->speed = freq / 1000; } else if (pdata != NULL) { - dev->speed = pdata->clkrate; - dev->flags = pdata->flags; - dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; + omap->speed = pdata->clkrate; + omap->flags = pdata->flags; + omap->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; } - dev->dev = &pdev->dev; - dev->irq = irq; + omap->dev = &pdev->dev; + omap->irq = irq; - spin_lock_init(&dev->lock); + spin_lock_init(&omap->lock); - platform_set_drvdata(pdev, dev); - init_completion(&dev->cmd_complete); + platform_set_drvdata(pdev, omap); + init_completion(&omap->cmd_complete); - dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3; + omap->reg_shift = (omap->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3; - pm_runtime_enable(dev->dev); - pm_runtime_set_autosuspend_delay(dev->dev, OMAP_I2C_PM_TIMEOUT); - pm_runtime_use_autosuspend(dev->dev); + pm_runtime_enable(omap->dev); + pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT); + pm_runtime_use_autosuspend(omap->dev); - r = pm_runtime_get_sync(dev->dev); - if (r < 0) + r = pm_runtime_get_sync(omap->dev); + if (IS_ERR_VALUE(r)) goto err_free_mem; /* @@ -1351,42 +1351,42 @@ omap_i2c_probe(struct platform_device *pdev) * Also since the omap_i2c_read_reg uses reg_map_ip_* a * readw_relaxed is done. */ - rev = readw_relaxed(dev->base + 0x04); + rev = readw_relaxed(omap->base + 0x04); - dev->scheme = OMAP_I2C_SCHEME(rev); - switch (dev->scheme) { + omap->scheme = OMAP_I2C_SCHEME(rev); + switch (omap->scheme) { case OMAP_I2C_SCHEME_0: - dev->regs = (u8 *)reg_map_ip_v1; - dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG); - minor = OMAP_I2C_REV_SCHEME_0_MAJOR(dev->rev); - major = OMAP_I2C_REV_SCHEME_0_MAJOR(dev->rev); + omap->regs = (u8 *)reg_map_ip_v1; + omap->rev = omap_i2c_read_reg(omap, OMAP_I2C_REV_REG); + minor = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev); + major = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev); break; case OMAP_I2C_SCHEME_1: /* FALLTHROUGH */ default: - dev->regs = (u8 *)reg_map_ip_v2; + omap->regs = (u8 *)reg_map_ip_v2; rev = (rev << 16) | - omap_i2c_read_reg(dev, OMAP_I2C_IP_V2_REVNB_LO); + omap_i2c_read_reg(omap, OMAP_I2C_IP_V2_REVNB_LO); minor = OMAP_I2C_REV_SCHEME_1_MINOR(rev); major = OMAP_I2C_REV_SCHEME_1_MAJOR(rev); - dev->rev = rev; + omap->rev = rev; } - dev->errata = 0; + omap->errata = 0; - if (dev->rev >= OMAP_I2C_REV_ON_2430 && - dev->rev < OMAP_I2C_REV_ON_4430_PLUS) - dev->errata |= I2C_OMAP_ERRATA_I207; + if (omap->rev >= OMAP_I2C_REV_ON_2430 && + omap->rev < OMAP_I2C_REV_ON_4430_PLUS) + omap->errata |= I2C_OMAP_ERRATA_I207; - if (dev->rev <= OMAP_I2C_REV_ON_3430_3530) - dev->errata |= I2C_OMAP_ERRATA_I462; + if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) + omap->errata |= I2C_OMAP_ERRATA_I462; - if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) { + if (!(omap->flags & OMAP_I2C_FLAG_NO_FIFO)) { u16 s; /* Set up the fifo size - Get total size */ - s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3; - dev->fifo_size = 0x8 << s; + s = (omap_i2c_read_reg(omap, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3; + omap->fifo_size = 0x8 << s; /* * Set up notification threshold as half the total available @@ -1394,36 +1394,36 @@ omap_i2c_probe(struct platform_device *pdev) * call back latencies. */ - dev->fifo_size = (dev->fifo_size / 2); + omap->fifo_size = (omap->fifo_size / 2); - if (dev->rev < OMAP_I2C_REV_ON_3630) - dev->b_hw = 1; /* Enable hardware fixes */ + if (omap->rev < OMAP_I2C_REV_ON_3630) + omap->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - if (dev->set_mpu_wkup_lat != NULL) - dev->latency = (1000000 * dev->fifo_size) / - (1000 * dev->speed / 8); + if (omap->set_mpu_wkup_lat != NULL) + omap->latency = (1000000 * omap->fifo_size) / + (1000 * omap->speed / 8); } /* reset ASAP, clearing any IRQs */ - omap_i2c_init(dev); + omap_i2c_init(omap); - if (dev->rev < OMAP_I2C_OMAP1_REV_2) - r = devm_request_irq(&pdev->dev, dev->irq, omap_i2c_omap1_isr, - IRQF_NO_SUSPEND, pdev->name, dev); + if (omap->rev < OMAP_I2C_OMAP1_REV_2) + r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr, + IRQF_NO_SUSPEND, pdev->name, omap); else - r = devm_request_threaded_irq(&pdev->dev, dev->irq, + r = devm_request_threaded_irq(&pdev->dev, omap->irq, omap_i2c_isr, omap_i2c_isr_thread, IRQF_NO_SUSPEND | IRQF_ONESHOT, - pdev->name, dev); + pdev->name, omap); if (r) { - dev_err(dev->dev, "failure requesting irq %i\n", dev->irq); + dev_err(omap->dev, "failure requesting irq %i\n", omap->irq); goto err_unuse_clocks; } - adap = &dev->adapter; - i2c_set_adapdata(adap, dev); + adap = &omap->adapter; + i2c_set_adapdata(adap, omap); adap->owner = THIS_MODULE; adap->class = I2C_CLASS_DEPRECATED; strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name)); @@ -1436,21 +1436,21 @@ omap_i2c_probe(struct platform_device *pdev) adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); if (r) { - dev_err(dev->dev, "failure adding adapter\n"); + dev_err(omap->dev, "failure adding adapter\n"); goto err_unuse_clocks; } - dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr, - major, minor, dev->speed); + dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr, + major, minor, omap->speed); - pm_runtime_mark_last_busy(dev->dev); - pm_runtime_put_autosuspend(dev->dev); + pm_runtime_mark_last_busy(omap->dev); + pm_runtime_put_autosuspend(omap->dev); return 0; err_unuse_clocks: - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); - pm_runtime_put(dev->dev); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); + pm_runtime_put(omap->dev); pm_runtime_disable(&pdev->dev); err_free_mem: @@ -1459,15 +1459,15 @@ err_free_mem: static int omap_i2c_remove(struct platform_device *pdev) { - struct omap_i2c_dev *dev = platform_get_drvdata(pdev); + struct omap_i2c_dev *omap = platform_get_drvdata(pdev); int ret; - i2c_del_adapter(&dev->adapter); + i2c_del_adapter(&omap->adapter); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) return ret; - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); + omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; @@ -1476,23 +1476,23 @@ static int omap_i2c_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int omap_i2c_runtime_suspend(struct device *dev) { - struct omap_i2c_dev *_dev = dev_get_drvdata(dev); + struct omap_i2c_dev *omap = dev_get_drvdata(dev); - _dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG); + omap->iestate = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); - if (_dev->scheme == OMAP_I2C_SCHEME_0) - omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0); + if (omap->scheme == OMAP_I2C_SCHEME_0) + omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, 0); else - omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, + omap_i2c_write_reg(omap, OMAP_I2C_IP_V2_IRQENABLE_CLR, OMAP_I2C_IP_V2_INTERRUPTS_MASK); - if (_dev->rev < OMAP_I2C_OMAP1_REV_2) { - omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */ + if (omap->rev < OMAP_I2C_OMAP1_REV_2) { + omap_i2c_read_reg(omap, OMAP_I2C_IV_REG); /* Read clears */ } else { - omap_i2c_write_reg(_dev, OMAP_I2C_STAT_REG, _dev->iestate); + omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, omap->iestate); /* Flush posted write */ - omap_i2c_read_reg(_dev, OMAP_I2C_STAT_REG); + omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); } pinctrl_pm_select_sleep_state(dev); @@ -1502,14 +1502,14 @@ static int omap_i2c_runtime_suspend(struct device *dev) static int omap_i2c_runtime_resume(struct device *dev) { - struct omap_i2c_dev *_dev = dev_get_drvdata(dev); + struct omap_i2c_dev *omap = dev_get_drvdata(dev); pinctrl_pm_select_default_state(dev); - if (!_dev->regs) + if (!omap->regs) return 0; - __omap_i2c_init(_dev); + __omap_i2c_init(omap); return 0; } -- cgit v1.2.3 From 1c4828f916ffd5b7cc4d57d832cce615475b36da Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 13 Jul 2015 15:38:04 -0500 Subject: i2c: omap: on ->remove() call pm_runtime_put_sync() we're about to remove the module, so we can't really schedule a PM transition in the future, we must wait for it to finish. Signed-off-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index e359ad39753b..afc3bfca0b6c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1468,7 +1468,7 @@ static int omap_i2c_remove(struct platform_device *pdev) return ret; omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); - pm_runtime_put(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; } -- cgit v1.2.3 From e1069878b957c5f6d0eb2f441a8372db8d6198b2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 11 Jul 2015 09:46:22 +0200 Subject: clk: shmobile: emev2: deassert reset for IIC0/1 We have a driver now for IIC, so disable reset for them. Signed-off-by: Wolfram Sang Acked-by: Stephen Boyd Signed-off-by: Wolfram Sang --- drivers/clk/shmobile/clk-emev2.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/shmobile/clk-emev2.c b/drivers/clk/shmobile/clk-emev2.c index 5b60beb7d0eb..a91825471c79 100644 --- a/drivers/clk/shmobile/clk-emev2.c +++ b/drivers/clk/shmobile/clk-emev2.c @@ -28,6 +28,8 @@ #define USIBU1_RSTCTRL 0x0ac #define USIBU2_RSTCTRL 0x0b0 #define USIBU3_RSTCTRL 0x0b4 +#define IIC0_RSTCTRL 0x0dc +#define IIC1_RSTCTRL 0x0e0 #define STI_RSTCTRL 0x124 #define STI_CLKSEL 0x688 @@ -66,6 +68,10 @@ static void __init emev2_smu_init(void) emev2_smu_write(2, USIBU1_RSTCTRL); emev2_smu_write(2, USIBU2_RSTCTRL); emev2_smu_write(2, USIBU3_RSTCTRL); + + /* deassert reset for IIC0->IIC1 */ + emev2_smu_write(1, IIC0_RSTCTRL); + emev2_smu_write(1, IIC1_RSTCTRL); } static void __init emev2_smu_clkdiv_init(struct device_node *np) -- cgit v1.2.3 From 5faf6e1f58b4488a8b24a722ccf317ed67a8e8d8 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 11 Jul 2015 09:46:23 +0200 Subject: i2c: emev2: add driver Add a basic driver for the Renesas EMEV2 SoC. Based on the driver from the BSP which was first worked on by Ian, and made ready for upstream by me. Signed-off-by: Ian Molton Reviewed-by: Laurent Pinchart Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-emev2.txt | 22 ++ drivers/i2c/busses/Kconfig | 7 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-emev2.c | 332 +++++++++++++++++++++ 4 files changed, 362 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-emev2.txt create mode 100644 drivers/i2c/busses/i2c-emev2.c (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/i2c/i2c-emev2.txt b/Documentation/devicetree/bindings/i2c/i2c-emev2.txt new file mode 100644 index 000000000000..5ed1ea1c7e14 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-emev2.txt @@ -0,0 +1,22 @@ +Device tree configuration for Renesas EMEV2 IIC controller + +Required properties: +- compatible : "renesas,iic-emev2" +- reg : address start and address range size of device +- interrupts : specifier for the IIC controller interrupt +- clocks : phandle to the IP core SCLK +- clock-names : must be "sclk" +- #address-cells : should be <1> +- #size-cells : should be <0> + +Example: + + iic0: i2c@e0070000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-emev2"; + reg = <0xe0070000 0x28>; + interrupts = <0 32 IRQ_TYPE_EDGE_RISING>; + clocks = <&iic0_sclk>; + clock-names = "sclk"; + }; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 577d58d1f1a1..0b798ae708fe 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -526,6 +526,13 @@ config I2C_EG20T ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. +config I2C_EMEV2 + tristate "EMMA Mobile series I2C adapter" + depends on HAVE_CLK + help + If you say yes to this option, support will be included for the + I2C interface on the Renesas Electronics EM/EV family of processors. + config I2C_EXYNOS5 tristate "Exynos5 high-speed I2C driver" depends on ARCH_EXYNOS && OF diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index e5f537c80da0..50e8bbb65f1c 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -48,6 +48,7 @@ i2c-designware-pci-objs := i2c-designware-pcidrv.o obj-$(CONFIG_I2C_DIGICOLOR) += i2c-digicolor.o obj-$(CONFIG_I2C_EFM32) += i2c-efm32.o obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o +obj-$(CONFIG_I2C_EMEV2) += i2c-emev2.o obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c new file mode 100644 index 000000000000..192ef6b50c79 --- /dev/null +++ b/drivers/i2c/busses/i2c-emev2.c @@ -0,0 +1,332 @@ +/* + * I2C driver for the Renesas EMEV2 SoC + * + * Copyright (C) 2015 Wolfram Sang + * Copyright 2013 Codethink Ltd. + * Copyright 2010-2015 Renesas Electronics Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* I2C Registers */ +#define I2C_OFS_IICACT0 0x00 /* start */ +#define I2C_OFS_IIC0 0x04 /* shift */ +#define I2C_OFS_IICC0 0x08 /* control */ +#define I2C_OFS_SVA0 0x0c /* slave address */ +#define I2C_OFS_IICCL0 0x10 /* clock select */ +#define I2C_OFS_IICX0 0x14 /* extension */ +#define I2C_OFS_IICS0 0x18 /* status */ +#define I2C_OFS_IICSE0 0x1c /* status For emulation */ +#define I2C_OFS_IICF0 0x20 /* IIC flag */ + +/* I2C IICACT0 Masks */ +#define I2C_BIT_IICE0 0x0001 + +/* I2C IICC0 Masks */ +#define I2C_BIT_LREL0 0x0040 +#define I2C_BIT_WREL0 0x0020 +#define I2C_BIT_SPIE0 0x0010 +#define I2C_BIT_WTIM0 0x0008 +#define I2C_BIT_ACKE0 0x0004 +#define I2C_BIT_STT0 0x0002 +#define I2C_BIT_SPT0 0x0001 + +/* I2C IICCL0 Masks */ +#define I2C_BIT_SMC0 0x0008 +#define I2C_BIT_DFC0 0x0004 + +/* I2C IICSE0 Masks */ +#define I2C_BIT_MSTS0 0x0080 +#define I2C_BIT_ALD0 0x0040 +#define I2C_BIT_EXC0 0x0020 +#define I2C_BIT_COI0 0x0010 +#define I2C_BIT_TRC0 0x0008 +#define I2C_BIT_ACKD0 0x0004 +#define I2C_BIT_STD0 0x0002 +#define I2C_BIT_SPD0 0x0001 + +/* I2C IICF0 Masks */ +#define I2C_BIT_STCF 0x0080 +#define I2C_BIT_IICBSY 0x0040 +#define I2C_BIT_STCEN 0x0002 +#define I2C_BIT_IICRSV 0x0001 + +struct em_i2c_device { + void __iomem *base; + struct i2c_adapter adap; + struct completion msg_done; + struct clk *sclk; +}; + +static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg) +{ + writeb((readb(priv->base + reg) & ~clear) | set, priv->base + reg); +} + +static int em_i2c_wait_for_event(struct em_i2c_device *priv) +{ + unsigned long time_left; + int status; + + reinit_completion(&priv->msg_done); + + time_left = wait_for_completion_timeout(&priv->msg_done, priv->adap.timeout); + + if (!time_left) + return -ETIMEDOUT; + + status = readb(priv->base + I2C_OFS_IICSE0); + return status & I2C_BIT_ALD0 ? -EAGAIN : status; +} + +static void em_i2c_stop(struct em_i2c_device *priv) +{ + /* Send Stop condition */ + em_clear_set_bit(priv, 0, I2C_BIT_SPT0 | I2C_BIT_SPIE0, I2C_OFS_IICC0); + + /* Wait for stop condition */ + em_i2c_wait_for_event(priv); +} + +static void em_i2c_reset(struct i2c_adapter *adap) +{ + struct em_i2c_device *priv = i2c_get_adapdata(adap); + int retr; + + /* If I2C active */ + if (readb(priv->base + I2C_OFS_IICACT0) & I2C_BIT_IICE0) { + /* Disable I2C operation */ + writeb(0, priv->base + I2C_OFS_IICACT0); + + retr = 1000; + while (readb(priv->base + I2C_OFS_IICACT0) == 1 && retr) + retr--; + WARN_ON(retr == 0); + } + + /* Transfer mode set */ + writeb(I2C_BIT_DFC0, priv->base + I2C_OFS_IICCL0); + + /* Can Issue start without detecting a stop, Reservation disabled. */ + writeb(I2C_BIT_STCEN | I2C_BIT_IICRSV, priv->base + I2C_OFS_IICF0); + + /* I2C enable, 9 bit interrupt mode */ + writeb(I2C_BIT_WTIM0, priv->base + I2C_OFS_IICC0); + + /* Enable I2C operation */ + writeb(I2C_BIT_IICE0, priv->base + I2C_OFS_IICACT0); + + retr = 1000; + while (readb(priv->base + I2C_OFS_IICACT0) == 0 && retr) + retr--; + WARN_ON(retr == 0); +} + +static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int stop) +{ + struct em_i2c_device *priv = i2c_get_adapdata(adap); + int count, status, read = !!(msg->flags & I2C_M_RD); + + /* Send start condition */ + em_clear_set_bit(priv, 0, I2C_BIT_ACKE0 | I2C_BIT_WTIM0, I2C_OFS_IICC0); + em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0); + + /* Send slave address and R/W type */ + writeb((msg->addr << 1) | read, priv->base + I2C_OFS_IIC0); + + /* Wait for transaction */ + status = em_i2c_wait_for_event(priv); + if (status < 0) + goto out_reset; + + /* Received NACK (result of setting slave address and R/W) */ + if (!(status & I2C_BIT_ACKD0)) { + em_i2c_stop(priv); + goto out; + } + + /* Extra setup for read transactions */ + if (read) { + /* 8 bit interrupt mode */ + em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0, I2C_OFS_IICC0); + em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0, I2C_OFS_IICC0); + + /* Wait for transaction */ + status = em_i2c_wait_for_event(priv); + if (status < 0) + goto out_reset; + } + + /* Send / receive data */ + for (count = 0; count < msg->len; count++) { + if (read) { /* Read transaction */ + msg->buf[count] = readb(priv->base + I2C_OFS_IIC0); + em_clear_set_bit(priv, 0, I2C_BIT_WREL0, I2C_OFS_IICC0); + + } else { /* Write transaction */ + /* Received NACK */ + if (!(status & I2C_BIT_ACKD0)) { + em_i2c_stop(priv); + goto out; + } + + /* Write data */ + writeb(msg->buf[count], priv->base + I2C_OFS_IIC0); + } + + /* Wait for R/W transaction */ + status = em_i2c_wait_for_event(priv); + if (status < 0) + goto out_reset; + } + + if (stop) + em_i2c_stop(priv); + + return count; + +out_reset: + em_i2c_reset(adap); +out: + return status < 0 ? status : -ENXIO; +} + +static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) +{ + struct em_i2c_device *priv = i2c_get_adapdata(adap); + int ret, i; + + if (readb(priv->base + I2C_OFS_IICF0) & I2C_BIT_IICBSY) + return -EAGAIN; + + for (i = 0; i < num; i++) { + ret = __em_i2c_xfer(adap, &msgs[i], (i == (num - 1))); + if (ret < 0) + return ret; + } + + /* I2C transfer completed */ + return num; +} + +static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id) +{ + struct em_i2c_device *priv = dev_id; + + complete(&priv->msg_done); + return IRQ_HANDLED; +} + +static u32 em_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm em_i2c_algo = { + .master_xfer = em_i2c_xfer, + .functionality = em_i2c_func, +}; + +static int em_i2c_probe(struct platform_device *pdev) +{ + struct em_i2c_device *priv; + struct resource *r; + int irq, ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + strlcpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name)); + + priv->sclk = devm_clk_get(&pdev->dev, "sclk"); + if (IS_ERR(priv->sclk)) + return PTR_ERR(priv->sclk); + + clk_prepare_enable(priv->sclk); + + priv->adap.timeout = msecs_to_jiffies(100); + priv->adap.retries = 5; + priv->adap.dev.parent = &pdev->dev; + priv->adap.algo = &em_i2c_algo; + priv->adap.owner = THIS_MODULE; + priv->adap.dev.of_node = pdev->dev.of_node; + + init_completion(&priv->msg_done); + + platform_set_drvdata(pdev, priv); + i2c_set_adapdata(&priv->adap, priv); + + em_i2c_reset(&priv->adap); + + irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(&pdev->dev, irq, em_i2c_irq_handler, 0, + "em_i2c", priv); + if (ret) + goto err_clk; + + ret = i2c_add_adapter(&priv->adap); + + if (ret) + goto err_clk; + + dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, irq); + + return 0; + +err_clk: + clk_disable_unprepare(priv->sclk); + return ret; +} + +static int em_i2c_remove(struct platform_device *dev) +{ + struct em_i2c_device *priv = platform_get_drvdata(dev); + + i2c_del_adapter(&priv->adap); + clk_disable_unprepare(priv->sclk); + + return 0; +} + +static const struct of_device_id em_i2c_ids[] = { + { .compatible = "renesas,iic-emev2", }, + { } +}; + +static struct platform_driver em_i2c_driver = { + .probe = em_i2c_probe, + .remove = em_i2c_remove, + .driver = { + .name = "em-i2c", + .of_match_table = em_i2c_ids, + } +}; +module_platform_driver(em_i2c_driver); + +MODULE_DESCRIPTION("EMEV2 I2C bus driver"); +MODULE_AUTHOR("Ian Molton and Wolfram Sang "); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, em_i2c_ids); -- cgit v1.2.3 From abf8a1fba9a48535595857ed46ad642272eea05c Mon Sep 17 00:00:00 2001 From: Leilei Shang Date: Tue, 14 Jul 2015 13:06:40 +0530 Subject: i2c: pxa: keep i2c irq ON in suspend During suspend there may still be some i2c access happening, as the interrupt is shared between multiple drivers. And if we don't keep i2c irq ON, there may be i2c access timeout if i2c is in irq mode of operation. Signed-off-by: Raul Xiong Signed-off-by: Xiaofan Tian [vaibhav.hiremath@linaro.org: updated Changelog] Signed-off-by: Vaibhav Hiremath Cc: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index d9c0d6a17ad6..f4ac8c595a45 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1232,8 +1232,9 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { i2c->adap.algo = &i2c_pxa_algorithm; - ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED, - dev_name(&dev->dev), i2c); + ret = request_irq(irq, i2c_pxa_handler, + IRQF_SHARED | IRQF_NO_SUSPEND, + dev_name(&dev->dev), i2c); if (ret) goto ereqirq; } -- cgit v1.2.3 From e087b4272effeacc10629316d47a257c88f82898 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 14 Jul 2015 13:06:41 +0530 Subject: i2c: pxa: No need to set slave addr for i2c master mode reset Normally i2c controller works as master, so slave addr is not needed, or it will impact some slave device (eg. ST NFC chip) i2c accesses, because it has the same i2c address with controller. For example, On the pxa1928 based platform, where PMIC (88pm860) is present @0x30 address on TWSI0 interface, and if we set 0x30 as a slave address in pxa1928 TWSI0 module, all the transactions towards PMIC would go for toss. Signed-off-by: Jett.Zhou Signed-off-by: Vaibhav Hiremath Acked-by: Robert Jarzmik Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index f4ac8c595a45..023e59fda650 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -459,7 +459,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) writel(I2C_ISR_INIT, _ISR(i2c)); writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); - if (i2c->reg_isar) + if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ -- cgit v1.2.3 From 8bd75bd3038df5e743c7daa84c2d34d13493b395 Mon Sep 17 00:00:00 2001 From: Shouming Wang Date: Tue, 14 Jul 2015 13:06:42 +0530 Subject: i2c: pxa: Return I2C_RETRY when timeout in pio mode In case of timeout in pio mode of operation return I2C_RETRY. This behavior will be same as interrupt mode of operation. Signed-off-by: Shouming Wang [vaibhav.hiremath@linaro.org: Updated changelog] Signed-off-by: Vaibhav Hiremath Acked-by: Robert Jarzmik Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 023e59fda650..632008f24098 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -745,8 +745,10 @@ static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, ret = i2c->msg_idx; out: - if (timeout == 0) + if (timeout == 0) { i2c_pxa_scream_blue_murder(i2c, "timeout"); + ret = I2C_RETRY; + } return ret; } -- cgit v1.2.3 From e2b498fd55a871ab3913914b982e3dd07d32e90e Mon Sep 17 00:00:00 2001 From: Yipeng Yao Date: Tue, 14 Jul 2015 13:06:43 +0530 Subject: i2c: pxa: Fix compile warning in 64bit mode Fix below warning message, coming from 64 bit toolchain. drivers/i2c/busses/i2c-pxa.c:1237:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Yipeng Yao [vaibhav.hiremath@linaro.org: Updated Changelog] Signed-off-by: Vaibhav Hiremath Cc: Wolfram Sang Acked-by: Robert Jarzmik Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 632008f24098..d0cc058f42c3 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1116,7 +1116,9 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, i2c->use_pio = 1; if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) i2c->fast_mode = 1; - *i2c_types = (u32)(of_id->data); + + *i2c_types = (enum pxa_i2c_types)(of_id->data); + return 0; } -- cgit v1.2.3 From 3a2dc1677b60af250bea85d470ef5151c70a1264 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 14 Jul 2015 13:06:44 +0530 Subject: i2c: pxa: Update debug function to dump more info on error Update i2c_pxa_scream_blue_murder() fn to print more information in case of error. Also, use dev_err variants instead of printk. Signed-off-by: Jett.Zhou Signed-off-by: Vaibhav Hiremath Cc: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index d0cc058f42c3..beeed7c53f2d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -132,6 +132,7 @@ struct pxa_i2c { unsigned int msg_idx; unsigned int msg_ptr; unsigned int slave_addr; + unsigned int req_slave_addr; struct i2c_adapter adap; struct clk *clk; @@ -253,15 +254,20 @@ static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) { unsigned int i; - printk(KERN_ERR "i2c: error: %s\n", why); - printk(KERN_ERR "i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", + struct device *dev = &i2c->adap.dev; + + dev_err(dev, "slave_0x%x error: %s\n", + i2c->req_slave_addr >> 1, why); + dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n", i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); - printk(KERN_ERR "i2c: ICR: %08x ISR: %08x\n", - readl(_ICR(i2c)), readl(_ISR(i2c))); - printk(KERN_DEBUG "i2c: log: "); + dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", + readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), + readl(_ISR(i2c))); + dev_dbg(dev, "log: "); for (i = 0; i < i2c->irqlogidx; i++) - printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); - printk("\n"); + pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); + + pr_debug("\n"); } #else /* ifdef DEBUG */ @@ -638,6 +644,7 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) * Step 1: target slave address into IDBR */ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); + i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); /* * Step 2: initiate the write. @@ -951,6 +958,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) * Write the next address. */ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); + i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); /* * And trigger a repeated start, and send the byte. -- cgit v1.2.3 From 51fcce86a70f6f63d733619afc425821118838dc Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 14 Jul 2015 13:06:45 +0530 Subject: i2c: pxa: Use devm_ variants in probe function This patch cleans up i2c_pxa_probe() function, - Use devm_ variants wherever This will clean both probe exit and i2c_pxa_remove() functions - Check platform resource before parsing any other data from DT/platform - Use dev_err on failure from i2c_add_numbered_adapter() - Use pr_info instead of printk for KERN_INFO Signed-off-by: Vaibhav Hiremath Acked-by: Robert Jarzmik [wsa: removed unneeded error prinout after devm_ioremap_resource] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pxa.c | 77 +++++++++++++++----------------------------- 1 file changed, 26 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index beeed7c53f2d..645e4b79d968 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1158,10 +1158,19 @@ static int i2c_pxa_probe(struct platform_device *dev) struct resource *res = NULL; int ret, irq; - i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); - if (!i2c) { - ret = -ENOMEM; - goto emalloc; + i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + i2c->reg_base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(i2c->reg_base)) + return PTR_ERR(i2c->reg_base); + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "no irq resource: %d\n", irq); + return irq; } /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ @@ -1171,19 +1180,7 @@ static int i2c_pxa_probe(struct platform_device *dev) if (ret > 0) ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); if (ret < 0) - goto eclk; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - irq = platform_get_irq(dev, 0); - if (res == NULL || irq < 0) { - ret = -ENODEV; - goto eclk; - } - - if (!request_mem_region(res->start, resource_size(res), res->name)) { - ret = -ENOMEM; - goto eclk; - } + return ret; i2c->adap.owner = THIS_MODULE; i2c->adap.retries = 5; @@ -1193,16 +1190,10 @@ static int i2c_pxa_probe(struct platform_device *dev) strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name)); - i2c->clk = clk_get(&dev->dev, NULL); + i2c->clk = devm_clk_get(&dev->dev, NULL); if (IS_ERR(i2c->clk)) { - ret = PTR_ERR(i2c->clk); - goto eclk; - } - - i2c->reg_base = ioremap(res->start, resource_size(res)); - if (!i2c->reg_base) { - ret = -EIO; - goto eremap; + dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk)); + return PTR_ERR(i2c->clk); } i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr; @@ -1244,11 +1235,13 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { i2c->adap.algo = &i2c_pxa_algorithm; - ret = request_irq(irq, i2c_pxa_handler, + ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler, IRQF_SHARED | IRQF_NO_SUSPEND, dev_name(&dev->dev), i2c); - if (ret) + if (ret) { + dev_err(&dev->dev, "failed to request irq: %d\n", ret); goto ereqirq; + } } i2c_pxa_reset(i2c); @@ -1261,33 +1254,22 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { - printk(KERN_INFO "I2C: Failed to add bus\n"); - goto eadapt; + dev_err(&dev->dev, "failed to add bus: %d\n", ret); + goto ereqirq; } platform_set_drvdata(dev, i2c); #ifdef CONFIG_I2C_PXA_SLAVE - printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n", - dev_name(&i2c->adap.dev), i2c->slave_addr); + dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n", + i2c->slave_addr); #else - printk(KERN_INFO "I2C: %s: PXA I2C adapter\n", - dev_name(&i2c->adap.dev)); + dev_info(&i2c->adap.dev, " PXA I2C adapter\n"); #endif return 0; -eadapt: - if (!i2c->use_pio) - free_irq(irq, i2c); ereqirq: clk_disable_unprepare(i2c->clk); - iounmap(i2c->reg_base); -eremap: - clk_put(i2c->clk); -eclk: - kfree(i2c); -emalloc: - release_mem_region(res->start, resource_size(res)); return ret; } @@ -1296,15 +1278,8 @@ static int i2c_pxa_remove(struct platform_device *dev) struct pxa_i2c *i2c = platform_get_drvdata(dev); i2c_del_adapter(&i2c->adap); - if (!i2c->use_pio) - free_irq(i2c->irq, i2c); clk_disable_unprepare(i2c->clk); - clk_put(i2c->clk); - - iounmap(i2c->reg_base); - release_mem_region(i2c->iobase, i2c->iosize); - kfree(i2c); return 0; } -- cgit v1.2.3 From 0387fc1645fed3b723e8556d83452bc09f79fd24 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:11 +0530 Subject: i2c: xiic: Remove the disabling of interrupts Currently the interrupts are disabled at the start of the isr and enabled at the end of the isr. Remove the same. In case the slave device NACKs the transaction while in the isr the transfer will continue and the NACK interrupt will arrive only after the isr is serviced. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 4dda23f22a67..912780a3a65e 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -604,14 +604,11 @@ static irqreturn_t xiic_isr(int irq, void *dev_id) struct xiic_i2c *i2c = dev_id; spin_lock(&i2c->lock); - /* disable interrupts globally */ - xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0); dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__); xiic_process(i2c); - xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK); spin_unlock(&i2c->lock); return IRQ_HANDLED; -- cgit v1.2.3 From fcc2fac60a95b4e63682ae4128e86d8768602fab Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:12 +0530 Subject: i2c: xiic: move the xiic_process to thread context The xiic_process is a 154 line code that runs in isr context currently move it to thread context. Also the name xiic_process suggests that the intension was to run in process context. Signed-off-by: Shubhrajyoti Datta [wsa: initialized irqreturn_t to IRQ_NONE instead of IRQ_HANDLED] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 912780a3a65e..3664dffdcab7 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -358,8 +358,9 @@ static void xiic_wakeup(struct xiic_i2c *i2c, int code) wake_up(&i2c->wait); } -static void xiic_process(struct xiic_i2c *i2c) +static irqreturn_t xiic_process(int irq, void *dev_id) { + struct xiic_i2c *i2c = dev_id; u32 pend, isr, ier; u32 clr = 0; @@ -368,6 +369,7 @@ static void xiic_process(struct xiic_i2c *i2c) * To find which interrupts are pending; AND interrupts pending with * interrupts masked. */ + spin_lock(&i2c->lock); isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET); ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET); pend = isr & ier; @@ -378,11 +380,6 @@ static void xiic_process(struct xiic_i2c *i2c) __func__, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET), i2c->tx_msg, i2c->nmsgs); - /* Do not processes a devices interrupts if the device has no - * interrupts pending - */ - if (!pend) - return; /* Service requesting interrupt */ if ((pend & XIIC_INTR_ARB_LOST_MASK) || @@ -502,6 +499,8 @@ out: dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr); xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr); + spin_unlock(&i2c->lock); + return IRQ_HANDLED; } static int xiic_bus_busy(struct xiic_i2c *i2c) @@ -602,16 +601,21 @@ static void xiic_start_send(struct xiic_i2c *i2c) static irqreturn_t xiic_isr(int irq, void *dev_id) { struct xiic_i2c *i2c = dev_id; - - spin_lock(&i2c->lock); + u32 pend, isr, ier; + irqreturn_t ret = IRQ_NONE; + /* Do not processes a devices interrupts if the device has no + * interrupts pending + */ dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__); - xiic_process(i2c); - - spin_unlock(&i2c->lock); + isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET); + ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET); + pend = isr & ier; + if (pend) + ret = IRQ_WAKE_THREAD; - return IRQ_HANDLED; + return ret; } static void __xiic_start_xfer(struct xiic_i2c *i2c) @@ -752,7 +756,10 @@ static int xiic_i2c_probe(struct platform_device *pdev) spin_lock_init(&i2c->lock); init_waitqueue_head(&i2c->wait); - ret = devm_request_irq(&pdev->dev, irq, xiic_isr, 0, pdev->name, i2c); + ret = devm_request_threaded_irq(&pdev->dev, irq, xiic_isr, + xiic_process, IRQF_ONESHOT, + pdev->name, i2c); + if (ret < 0) { dev_err(&pdev->dev, "Cannot claim IRQ\n"); return ret; -- cgit v1.2.3 From d701667bb3318f27152ad61a6f5cc8b36cc5fcad Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:13 +0530 Subject: i2c: xiic: Do not reset controller before every transfer Currently before every transfer the controller is reinitialised. We are already resetting the controller upon errors so upon every transfer is a performance kill. Remove the same. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 3664dffdcab7..43bcfeddc54e 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -667,7 +667,6 @@ static void xiic_start_xfer(struct xiic_i2c *i2c) unsigned long flags; spin_lock_irqsave(&i2c->lock, flags); - xiic_reinit(i2c); /* disable interrupts globally */ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0); spin_unlock_irqrestore(&i2c->lock, flags); -- cgit v1.2.3 From e6c9a037bc8afdce055a2a23bb61903b3844dfda Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:14 +0530 Subject: i2c: xiic: Remove the disabling of interrupts Currently before every transfer the interrupts are disabled. So incase the slave nacks in the middle of the transfer the current transfer is not aborted. Upon enabling the interrupts conditions like NACK , arbitration lost will not be masked. Remove the disabling of the interrupts. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 43bcfeddc54e..5d133d487ec0 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -664,15 +664,8 @@ static void __xiic_start_xfer(struct xiic_i2c *i2c) static void xiic_start_xfer(struct xiic_i2c *i2c) { - unsigned long flags; - - spin_lock_irqsave(&i2c->lock, flags); - /* disable interrupts globally */ - xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0); - spin_unlock_irqrestore(&i2c->lock, flags); __xiic_start_xfer(i2c); - xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK); } static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) -- cgit v1.2.3 From b33aa252785eb6de2f5325a3338fa917a9b4bc66 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:15 +0530 Subject: i2c: xiic: Remove busy loop while waiting for bus busy Remove the busy loop while waiting for bus busy. Instead let the processor sleep. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 5d133d487ec0..41da9028b6ea 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -524,7 +524,7 @@ static int xiic_busy(struct xiic_i2c *i2c) */ err = xiic_bus_busy(i2c); while (err && tries--) { - mdelay(1); + msleep(1); err = xiic_bus_busy(i2c); } -- cgit v1.2.3 From 542e2a9b739068c1b72db530987382662201469a Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:17 +0530 Subject: i2c: xiic: Remove the Addressed as slave interrupt Currently there is no slave mode support in the driver also in the isr we just ack it and do nothing. So disable the AAS interrupt. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 41da9028b6ea..08dfb8c88bbb 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -283,7 +283,7 @@ static void xiic_reinit(struct xiic_i2c *i2c) /* Enable interrupts */ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK); - xiic_irq_clr_en(i2c, XIIC_INTR_AAS_MASK | XIIC_INTR_ARB_LOST_MASK); + xiic_irq_clr_en(i2c, XIIC_INTR_ARB_LOST_MASK); } static void xiic_deinit(struct xiic_i2c *i2c) -- cgit v1.2.3 From 7f9906bd7f7211327ba58657caa216608f9c93de Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:18 +0530 Subject: i2c: xiic: Service all interrupts in isr Currently only one interrupt is serviced in the isr. In case the multiple interrupts happen simultenously we service and ack only one of them. Check for all the causes in the isr and service them. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 08dfb8c88bbb..987a18c8b6e3 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -401,11 +401,11 @@ static irqreturn_t xiic_process(int irq, void *dev_id) if (i2c->tx_msg) xiic_wakeup(i2c, STATE_ERROR); - - } else if (pend & XIIC_INTR_RX_FULL_MASK) { + } + if (pend & XIIC_INTR_RX_FULL_MASK) { /* Receive register/FIFO is full */ - clr = XIIC_INTR_RX_FULL_MASK; + clr |= XIIC_INTR_RX_FULL_MASK; if (!i2c->rx_msg) { dev_dbg(i2c->adap.dev.parent, "%s unexpexted RX IRQ\n", __func__); @@ -438,9 +438,10 @@ static irqreturn_t xiic_process(int irq, void *dev_id) __xiic_start_xfer(i2c); } } - } else if (pend & XIIC_INTR_BNB_MASK) { + } + if (pend & XIIC_INTR_BNB_MASK) { /* IIC bus has transitioned to not busy */ - clr = XIIC_INTR_BNB_MASK; + clr |= XIIC_INTR_BNB_MASK; /* The bus is not busy, disable BusNotBusy interrupt */ xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK); @@ -453,12 +454,12 @@ static irqreturn_t xiic_process(int irq, void *dev_id) xiic_wakeup(i2c, STATE_DONE); else xiic_wakeup(i2c, STATE_ERROR); - - } else if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) { + } + if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) { /* Transmit register/FIFO is empty or ½ empty */ - clr = pend & - (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK); + clr |= (pend & + (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)); if (!i2c->tx_msg) { dev_dbg(i2c->adap.dev.parent, @@ -489,11 +490,6 @@ static irqreturn_t xiic_process(int irq, void *dev_id) * make sure to disable tx half */ xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK); - } else { - /* got IRQ which is not acked */ - dev_err(i2c->adap.dev.parent, "%s Got unexpected IRQ\n", - __func__); - clr = pend; } out: dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr); -- cgit v1.2.3 From 6b0c8dc3104253a5e4b2ec923eeb48cece0abcb9 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 17 Jun 2015 20:48:19 +0530 Subject: i2c: xiic: Do not continue in case of errors in Rx In case of error conditions like Arbitration lost or NACK lets signal the waiting process. Handle error cases in the Rx path Signed-off-by: Shubhrajyoti Datta Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-xiic.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index 987a18c8b6e3..e23a7b068c60 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -399,6 +399,8 @@ static irqreturn_t xiic_process(int irq, void *dev_id) */ xiic_reinit(i2c); + if (i2c->rx_msg) + xiic_wakeup(i2c, STATE_ERROR); if (i2c->tx_msg) xiic_wakeup(i2c, STATE_ERROR); } -- cgit v1.2.3 From 77441ac00d324c037c088da090fa505b45dad9d4 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 14 Jul 2015 14:07:08 +0200 Subject: i2c: omap: fix cleanup regression Patch "i2c: omap: abolish variable name confusion" triggered a coccinelle warning which we fix here: drivers/i2c/busses/i2c-omap.c:1333:5-24: pm_runtime_get_sync returns < 0 as error. Unecessary IS_ERR_VALUE at line 1334 Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index afc3bfca0b6c..08d26ba61ed3 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1342,7 +1342,7 @@ omap_i2c_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(omap->dev); r = pm_runtime_get_sync(omap->dev); - if (IS_ERR_VALUE(r)) + if (r < 0) goto err_free_mem; /* -- cgit v1.2.3 From 6f4664b2e2c2cfa35b48271423c5e602b6970f14 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 30 Jun 2015 16:24:26 +0530 Subject: i2c: tegra: update CONFIG_LOAD for new conifiguration Once the new configuration is set on the conifg register of I2C controller, it is require to update the CONFIG_LOAD register to transfer the new SW configuration to actual HW internal registers that would be used in the actual logic. It is like, SW is programming only shadow registers through regular configuration and when these load_config bit fields are set to 1, it causes the regular/shadows registers configuration transferred to the HW internal active registers. So SW has to set these bit fields at the end of all regular registers configuration. And these config_load bits are HW auto-clear bits. HW clears these bit fields once the register configuration is moved to HW internal active registers. So SW has to wait until these bits are auto-cleared before going for any further programming This mechanism is supported on T124 and after this SoCs. Signed-off-by: Chaitanya Bandi Signed-off-by: Laxman Dewangan Tested-by: Stephen Warren Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 78a366814696..348870acfef2 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -100,6 +100,12 @@ #define I2C_HEADER_CONTINUE_XFER (1<<15) #define I2C_HEADER_MASTER_ADDR_SHIFT 12 #define I2C_HEADER_SLAVE_ADDR_SHIFT 1 + +#define I2C_CONFIG_LOAD 0x08C +#define I2C_MSTR_CONFIG_LOAD (1 << 0) +#define I2C_SLV_CONFIG_LOAD (1 << 1) +#define I2C_TIMEOUT_CONFIG_LOAD (1 << 2) + /* * msg_end_type: The bus control which need to be send at end of transfer. * @MSG_END_STOP: Send stop pulse at end of transfer. @@ -121,6 +127,8 @@ enum msg_end_type { * @has_single_clk_source: The i2c controller has single clock source. Tegra30 * and earlier Socs has two clock sources i.e. div-clk and * fast-clk. + * @has_config_load_reg: Has the config load register to load the new + * configuration. * @clk_divisor_hs_mode: Clock divisor in HS mode. * @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is * applicable if there is no fast clock source i.e. single clock @@ -131,6 +139,7 @@ struct tegra_i2c_hw_feature { bool has_continue_xfer_support; bool has_per_pkt_xfer_complete_irq; bool has_single_clk_source; + bool has_config_load_reg; int clk_divisor_hs_mode; int clk_divisor_std_fast_mode; }; @@ -410,6 +419,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) u32 val; int err = 0; u32 clk_divisor; + unsigned long timeout = jiffies + HZ; err = tegra_i2c_clock_enable(i2c_dev); if (err < 0) { @@ -451,6 +461,18 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) if (tegra_i2c_flush_fifos(i2c_dev)) err = -ETIMEDOUT; + if (i2c_dev->hw->has_config_load_reg) { + i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD); + while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) { + if (time_after(jiffies, timeout)) { + dev_warn(i2c_dev->dev, + "timeout waiting for config load\n"); + return -ETIMEDOUT; + } + msleep(1); + } + } + tegra_i2c_clock_disable(i2c_dev); if (i2c_dev->irq_disabled) { @@ -681,6 +703,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_single_clk_source = false, .clk_divisor_hs_mode = 3, .clk_divisor_std_fast_mode = 0, + .has_config_load_reg = false, }; static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { @@ -689,6 +712,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .has_single_clk_source = false, .clk_divisor_hs_mode = 3, .clk_divisor_std_fast_mode = 0, + .has_config_load_reg = false, }; static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { @@ -697,10 +721,21 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .has_single_clk_source = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_fast_mode = 0x19, + .has_config_load_reg = false, +}; + +static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { + .has_continue_xfer_support = true, + .has_per_pkt_xfer_complete_irq = true, + .has_single_clk_source = true, + .clk_divisor_hs_mode = 1, + .clk_divisor_std_fast_mode = 0x19, + .has_config_load_reg = true, }; /* Match table for of_platform binding */ static const struct of_device_id tegra_i2c_of_match[] = { + { .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, }, { .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, }, { .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, }, { .compatible = "nvidia,tegra20-i2c", .data = &tegra20_i2c_hw, }, -- cgit v1.2.3 From d57f5dedde18253d5c72a823c0a7ff3b20b57560 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 30 Jun 2015 16:24:27 +0530 Subject: i2c: tegra: add support for fast plus (FM+) mode clock rate Tegra I2C controller required to configure the clock divisor register inside controller to different value based on the clock speed. The recommended clock divisor for the I2C controller for standard/fast mode is 0x19 and for fast-mode plus is 0x10. Add support to configure clock divisor register of I2C controller based on bus clock rate. This clock divisor is supported form T114 onwards. Signed-off-by: Chaitanya Bandi Signed-off-by: Laxman Dewangan Tested-by: Stephen Warren Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 348870acfef2..b7e1a3655421 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -142,6 +142,7 @@ struct tegra_i2c_hw_feature { bool has_config_load_reg; int clk_divisor_hs_mode; int clk_divisor_std_fast_mode; + u16 clk_divisor_fast_plus_mode; }; /** @@ -181,6 +182,7 @@ struct tegra_i2c_dev { size_t msg_buf_remaining; int msg_read; u32 bus_clk_rate; + u16 clk_divisor_non_hs_mode; bool is_suspended; }; @@ -441,7 +443,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) /* Make sure clock divisor programmed correctly */ clk_divisor = i2c_dev->hw->clk_divisor_hs_mode; - clk_divisor |= i2c_dev->hw->clk_divisor_std_fast_mode << + clk_divisor |= i2c_dev->clk_divisor_non_hs_mode << I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT; i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR); @@ -703,6 +705,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_single_clk_source = false, .clk_divisor_hs_mode = 3, .clk_divisor_std_fast_mode = 0, + .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, }; @@ -712,6 +715,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .has_single_clk_source = false, .clk_divisor_hs_mode = 3, .clk_divisor_std_fast_mode = 0, + .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, }; @@ -721,6 +725,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .has_single_clk_source = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_fast_mode = 0x19, + .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = false, }; @@ -730,6 +735,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { .has_single_clk_source = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_fast_mode = 0x19, + .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, }; @@ -828,7 +834,14 @@ static int tegra_i2c_probe(struct platform_device *pdev) } } - clk_multiplier *= (i2c_dev->hw->clk_divisor_std_fast_mode + 1); + i2c_dev->clk_divisor_non_hs_mode = + i2c_dev->hw->clk_divisor_std_fast_mode; + if (i2c_dev->hw->clk_divisor_fast_plus_mode && + (i2c_dev->bus_clk_rate == 1000000)) + i2c_dev->clk_divisor_non_hs_mode = + i2c_dev->hw->clk_divisor_fast_plus_mode; + + clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1); ret = clk_set_rate(i2c_dev->div_clk, i2c_dev->bus_clk_rate * clk_multiplier); if (ret) { -- cgit v1.2.3 From 63cab195bf498676619951e81ad5791e9d47c420 Mon Sep 17 00:00:00 2001 From: Anurag Kumar Vulisha Date: Fri, 10 Jul 2015 20:10:14 +0530 Subject: i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC Cadence 1.0 version has bugs which have been fixed in the cadence 1.4 version. This patch removes the quirks present in the driver for cadence 1.4 version. Signed-off-by: Anurag Kumar Vulisha [wsa: fixed indentation issues in r1p10_i2c_def] Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-cadence.txt | 6 +- drivers/i2c/busses/i2c-cadence.c | 68 ++++++++++++++++++---- 2 files changed, 62 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt index 7cb0b5608f49..ebaa90c58c8e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-cadence.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-cadence.txt @@ -2,7 +2,11 @@ Binding for the Cadence I2C controller Required properties: - reg: Physical base address and size of the controller's register area. - - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'. + - compatible: Should contain one of: + * "cdns,i2c-r1p10" + Note: Use this when cadence i2c controller version 1.0 is used. + * "cdns,i2c-r1p14" + Note: Use this when cadence i2c controller version 1.4 is used. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt bindings. - #address-cells: Should be 1. diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 2ee78e099d30..18e48ae4a60d 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -17,6 +17,7 @@ #include #include #include +#include /* Register offsets for the I2C device. */ #define CDNS_I2C_CR_OFFSET 0x00 /* Control Register, RW */ @@ -113,6 +114,8 @@ #define CDNS_I2C_TIMEOUT_MAX 0xFF +#define CDNS_I2C_BROKEN_HOLD_BIT BIT(0) + #define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset) #define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset) @@ -135,6 +138,7 @@ * @bus_hold_flag: Flag used in repeated start for clearing HOLD bit * @clk: Pointer to struct clk * @clk_rate_change_nb: Notifier block for clock rate changes + * @quirks: flag for broken hold bit usage in r1p10 */ struct cdns_i2c { void __iomem *membase; @@ -154,6 +158,11 @@ struct cdns_i2c { unsigned int bus_hold_flag; struct clk *clk; struct notifier_block clk_rate_change_nb; + u32 quirks; +}; + +struct cdns_platform_data { + u32 quirks; }; #define to_cdns_i2c(_nb) container_of(_nb, struct cdns_i2c, \ @@ -172,6 +181,12 @@ static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id) cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET); } +static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround) +{ + return (hold_wrkaround && + (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)); +} + /** * cdns_i2c_isr - Interrupt handler for the I2C device * @irq: irq number for the I2C device @@ -186,6 +201,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) { unsigned int isr_status, avail_bytes, updatetx; unsigned int bytes_to_send; + bool hold_quirk; struct cdns_i2c *id = ptr; /* Signal completion only after everything is updated */ int done_flag = 0; @@ -208,6 +224,8 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) if (id->recv_count > id->curr_recv_count) updatetx = 1; + hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx; + /* When receiving, handle data interrupt and completion interrupt */ if (id->p_recv_buf && ((isr_status & CDNS_I2C_IXR_COMP) || @@ -229,8 +247,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) id->recv_count--; id->curr_recv_count--; - if (updatetx && - (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)) + if (cdns_is_holdquirk(id, hold_quirk)) break; } @@ -241,8 +258,7 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) * maintain transfer size non-zero while performing a large * receive operation. */ - if (updatetx && - (id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1)) { + if (cdns_is_holdquirk(id, hold_quirk)) { /* wait while fifo is full */ while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) != (id->curr_recv_count - CDNS_I2C_FIFO_DEPTH)) @@ -264,6 +280,22 @@ static irqreturn_t cdns_i2c_isr(int irq, void *ptr) CDNS_I2C_XFER_SIZE_OFFSET); id->curr_recv_count = id->recv_count; } + } else if (id->recv_count && !hold_quirk && + !id->curr_recv_count) { + + /* Set the slave address in address register*/ + cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK, + CDNS_I2C_ADDR_OFFSET); + + if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) { + cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE, + CDNS_I2C_XFER_SIZE_OFFSET); + id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE; + } else { + cdns_i2c_writereg(id->recv_count, + CDNS_I2C_XFER_SIZE_OFFSET); + id->curr_recv_count = id->recv_count; + } } /* Clear hold (if not repeated start) and signal completion */ @@ -535,11 +567,13 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int ret, count; u32 reg; struct cdns_i2c *id = adap->algo_data; + bool hold_quirk; /* Check if the bus is free */ if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA) return -EAGAIN; + hold_quirk = !!(id->quirks & CDNS_I2C_BROKEN_HOLD_BIT); /* * Set the flag to one when multiple messages are to be * processed with a repeated start. @@ -552,7 +586,7 @@ static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, * followed by any other message, an error is returned * indicating that this sequence is not supported. */ - for (count = 0; count < num - 1; count++) { + for (count = 0; (count < num - 1 && hold_quirk); count++) { if (msgs[count].flags & I2C_M_RD) { dev_warn(adap->dev.parent, "Can't do repeated start after a receive message\n"); @@ -815,6 +849,17 @@ static int __maybe_unused cdns_i2c_resume(struct device *_dev) static SIMPLE_DEV_PM_OPS(cdns_i2c_dev_pm_ops, cdns_i2c_suspend, cdns_i2c_resume); +static const struct cdns_platform_data r1p10_i2c_def = { + .quirks = CDNS_I2C_BROKEN_HOLD_BIT, +}; + +static const struct of_device_id cdns_i2c_of_match[] = { + { .compatible = "cdns,i2c-r1p10", .data = &r1p10_i2c_def }, + { .compatible = "cdns,i2c-r1p14",}, + { /* end of table */ } +}; +MODULE_DEVICE_TABLE(of, cdns_i2c_of_match); + /** * cdns_i2c_probe - Platform registration call * @pdev: Handle to the platform device structure @@ -830,6 +875,7 @@ static int cdns_i2c_probe(struct platform_device *pdev) struct resource *r_mem; struct cdns_i2c *id; int ret; + const struct of_device_id *match; id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL); if (!id) @@ -837,6 +883,12 @@ static int cdns_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, id); + match = of_match_node(cdns_i2c_of_match, pdev->dev.of_node); + if (match && match->data) { + const struct cdns_platform_data *data = match->data; + id->quirks = data->quirks; + } + r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); id->membase = devm_ioremap_resource(&pdev->dev, r_mem); if (IS_ERR(id->membase)) @@ -935,12 +987,6 @@ static int cdns_i2c_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id cdns_i2c_of_match[] = { - { .compatible = "cdns,i2c-r1p10", }, - { /* end of table */ } -}; -MODULE_DEVICE_TABLE(of, cdns_i2c_of_match); - static struct platform_driver cdns_i2c_drv = { .driver = { .name = DRIVER_NAME, -- cgit v1.2.3 From 82cd5d041c8c2cdceaa6833d2f73905279d1c94f Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Mon, 13 Jul 2015 19:31:12 +0200 Subject: i2c: parport: Add VCT-jig adapter Add support for VCT-jig parallel port I2C adapter to i2c-parport. The adapter schematic can be found here (in the RAR file): http://remont-aud.net/shop/22/desc/vct-jig-komplekt-dlja-samostojatelnoj-sborki Signed-off-by: Ondrej Zary Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- Documentation/i2c/busses/i2c-parport | 1 + drivers/i2c/busses/i2c-parport.h | 8 ++++++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport index 0e2d17b460fd..c3dbb3bfd814 100644 --- a/Documentation/i2c/busses/i2c-parport +++ b/Documentation/i2c/busses/i2c-parport @@ -20,6 +20,7 @@ It currently supports the following devices: * (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031 * (type=6) Barco LPT->DVI (K5800236) adapter * (type=7) One For All JP1 parallel port adapter + * (type=8) VCT-jig These devices use different pinout configurations, so you have to tell the driver what you have, using the type module parameter. There is no diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index 4e1294536805..84a6616b072f 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -89,6 +89,13 @@ static const struct adapter_parm adapter_parm[] = { .getsda = { 0x80, PORT_STAT, 1 }, .init = { 0x04, PORT_DATA, 1 }, }, + /* type 8: VCT-jig */ + { + .setsda = { 0x04, PORT_DATA, 1 }, + .setscl = { 0x01, PORT_DATA, 1 }, + .getsda = { 0x40, PORT_STAT, 0 }, + .getscl = { 0x80, PORT_STAT, 1 }, + }, }; static int type = -1; @@ -103,4 +110,5 @@ MODULE_PARM_DESC(type, " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" " 6 = Barco LPT->DVI (K5800236) adapter\n" " 7 = One For All JP1 parallel port adapter\n" + " 8 = VCT-jig\n" ); -- cgit v1.2.3 From b0898fdaffb2932aba0108986b90d9d69888e189 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 8 Jul 2015 13:15:36 +0300 Subject: i2c: designware-pci: use IRQF_COND_SUSPEND flag The mentioned flag fixes a warning on Intel Edison board since one of the I2C controller shares IRQ line with watchdog timer. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-pcidrv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 6643d2dc0b25..df23e8c30e6f 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -260,8 +260,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci"); - r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, IRQF_SHARED, - adap->name, dev); + r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, + IRQF_SHARED | IRQF_COND_SUSPEND, adap->name, dev); if (r) { dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); return r; -- cgit v1.2.3 From 069d5b745b2a98ebc8c239fe0b7bdb6c5ff0f475 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 10 Jul 2015 14:52:31 +0900 Subject: i2c: Drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-slave-eeprom.c | 1 - drivers/i2c/muxes/i2c-mux-pca9541.c | 1 - drivers/i2c/muxes/i2c-mux-pca954x.c | 1 - 3 files changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c index 1da449614779..b2039f94c9d8 100644 --- a/drivers/i2c/i2c-slave-eeprom.c +++ b/drivers/i2c/i2c-slave-eeprom.c @@ -157,7 +157,6 @@ MODULE_DEVICE_TABLE(i2c, i2c_slave_eeprom_id); static struct i2c_driver i2c_slave_eeprom_driver = { .driver = { .name = "i2c-slave-eeprom", - .owner = THIS_MODULE, }, .probe = i2c_slave_eeprom_probe, .remove = i2c_slave_eeprom_remove, diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c index 0c8d4d2cbdaf..d0ba424adebc 100644 --- a/drivers/i2c/muxes/i2c-mux-pca9541.c +++ b/drivers/i2c/muxes/i2c-mux-pca9541.c @@ -386,7 +386,6 @@ static int pca9541_remove(struct i2c_client *client) static struct i2c_driver pca9541_driver = { .driver = { .name = "pca9541", - .owner = THIS_MODULE, }, .probe = pca9541_probe, .remove = pca9541_remove, diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index ea4aa9dfcea9..acfcef3d4068 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -300,7 +300,6 @@ static struct i2c_driver pca954x_driver = { .driver = { .name = "pca954x", .pm = &pca954x_pm, - .owner = THIS_MODULE, }, .probe = pca954x_probe, .remove = pca954x_remove, -- cgit v1.2.3 From 141124e6e0db645396321aabed01c5e0b12cccc1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 10 Jul 2015 15:23:17 +0900 Subject: misc: Drop owner assignment from i2c_driver i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wolfram Sang --- drivers/misc/ad525x_dpot-i2c.c | 1 - drivers/misc/apds990x.c | 1 - drivers/misc/bh1770glc.c | 1 - drivers/misc/bmp085-i2c.c | 1 - drivers/misc/eeprom/at24.c | 1 - drivers/misc/isl29003.c | 1 - drivers/misc/lis3lv02d/lis3lv02d_i2c.c | 1 - drivers/misc/ti-st/st_kim.c | 1 - drivers/misc/tsl2550.c | 1 - 9 files changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/ad525x_dpot-i2c.c b/drivers/misc/ad525x_dpot-i2c.c index 705b881e186d..d11187d36ddd 100644 --- a/drivers/misc/ad525x_dpot-i2c.c +++ b/drivers/misc/ad525x_dpot-i2c.c @@ -106,7 +106,6 @@ MODULE_DEVICE_TABLE(i2c, ad_dpot_id); static struct i2c_driver ad_dpot_i2c_driver = { .driver = { .name = "ad_dpot", - .owner = THIS_MODULE, }, .probe = ad_dpot_i2c_probe, .remove = ad_dpot_i2c_remove, diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c index 3739ffa9cdf1..a3e789b85cc8 100644 --- a/drivers/misc/apds990x.c +++ b/drivers/misc/apds990x.c @@ -1275,7 +1275,6 @@ static const struct dev_pm_ops apds990x_pm_ops = { static struct i2c_driver apds990x_driver = { .driver = { .name = "apds990x", - .owner = THIS_MODULE, .pm = &apds990x_pm_ops, }, .probe = apds990x_probe, diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c index b756381b8250..753d7ecdadaa 100644 --- a/drivers/misc/bh1770glc.c +++ b/drivers/misc/bh1770glc.c @@ -1396,7 +1396,6 @@ static const struct dev_pm_ops bh1770_pm_ops = { static struct i2c_driver bh1770_driver = { .driver = { .name = "bh1770glc", - .owner = THIS_MODULE, .pm = &bh1770_pm_ops, }, .probe = bh1770_probe, diff --git a/drivers/misc/bmp085-i2c.c b/drivers/misc/bmp085-i2c.c index a7c16295b816..f35c218aaa1a 100644 --- a/drivers/misc/bmp085-i2c.c +++ b/drivers/misc/bmp085-i2c.c @@ -66,7 +66,6 @@ MODULE_DEVICE_TABLE(i2c, bmp085_id); static struct i2c_driver bmp085_i2c_driver = { .driver = { - .owner = THIS_MODULE, .name = BMP085_NAME, }, .id_table = bmp085_id, diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 6ded3dc36644..2b254f3a1154 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -686,7 +686,6 @@ static int at24_remove(struct i2c_client *client) static struct i2c_driver at24_driver = { .driver = { .name = "at24", - .owner = THIS_MODULE, }, .probe = at24_probe, .remove = at24_remove, diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 12c30b486b27..976df0013633 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -465,7 +465,6 @@ MODULE_DEVICE_TABLE(i2c, isl29003_id); static struct i2c_driver isl29003_driver = { .driver = { .name = ISL29003_DRV_NAME, - .owner = THIS_MODULE, .pm = ISL29003_PM_OPS, }, .probe = isl29003_probe, diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c index e3e7f1dc27ba..0c3bb7e3ee80 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c +++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c @@ -274,7 +274,6 @@ static const struct dev_pm_ops lis3_pm_ops = { static struct i2c_driver lis3lv02d_i2c_driver = { .driver = { .name = DRV_NAME, - .owner = THIS_MODULE, .pm = &lis3_pm_ops, .of_match_table = of_match_ptr(lis3lv02d_i2c_dt_ids), }, diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 5027b8ffae43..c84093e639e0 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -939,7 +939,6 @@ static struct platform_driver kim_platform_driver = { .resume = kim_resume, .driver = { .name = "kim", - .owner = THIS_MODULE, .of_match_table = of_match_ptr(kim_of_match), }, }; diff --git a/drivers/misc/tsl2550.c b/drivers/misc/tsl2550.c index b00335652e52..87a13374fdc0 100644 --- a/drivers/misc/tsl2550.c +++ b/drivers/misc/tsl2550.c @@ -446,7 +446,6 @@ MODULE_DEVICE_TABLE(i2c, tsl2550_id); static struct i2c_driver tsl2550_driver = { .driver = { .name = TSL2550_DRV_NAME, - .owner = THIS_MODULE, .pm = TSL2550_PM_OPS, }, .probe = tsl2550_probe, -- cgit v1.2.3 From 611e12ea0f121a31d9e9c4ce2a18a77abc2f28d6 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 17:30:49 +0300 Subject: i2c: core: manage i2c bus device refcount in i2c_[get|put]_adapter In addition to module_get()/module_put() add get_device()/put_device() calls into i2c_get_adapter()/i2c_put_adapter() exported interfaces. This is done to lock I2C bus device, if it is in use by a client. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index c83e4d13cfc5..f80992d0a608 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -2413,9 +2413,15 @@ struct i2c_adapter *i2c_get_adapter(int nr) mutex_lock(&core_lock); adapter = idr_find(&i2c_adapter_idr, nr); - if (adapter && !try_module_get(adapter->owner)) + if (!adapter) + goto exit; + + if (try_module_get(adapter->owner)) + get_device(&adapter->dev); + else adapter = NULL; + exit: mutex_unlock(&core_lock); return adapter; } @@ -2423,8 +2429,11 @@ EXPORT_SYMBOL(i2c_get_adapter); void i2c_put_adapter(struct i2c_adapter *adap) { - if (adap) - module_put(adap->owner); + if (!adap) + return; + + put_device(&adap->dev); + module_put(adap->owner); } EXPORT_SYMBOL(i2c_put_adapter); -- cgit v1.2.3 From 48e9743dd6483c5fd3f10c8e42c60d52d64b0e27 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 17:30:50 +0300 Subject: i2c: core: add and export of_get_i2c_adapter_by_node() interface of_find_i2c_adapter_by_node() call requires quite often missing put_device(), and i2c_put_adapter() releases a device locked by i2c_get_adapter() only. In general module_put(adapter->owner) and put_device(dev) are not interchangeable. This is a common error reproduction scenario as a result of the misusage described above (for clearness this is run on iMX6 platform with HDMI and I2C bus drivers compiled as kernel modules): root@mx6q:~# lsmod | grep i2c i2c_imx 10213 0 root@mx6q:~# lsmod | grep dw_hdmi_imx dw_hdmi_imx 3631 0 dw_hdmi 11846 1 dw_hdmi_imx imxdrm 8674 3 dw_hdmi_imx,imx_ipuv3_crtc,imx_ldb drm_kms_helper 113765 5 dw_hdmi,imxdrm,imx_ipuv3_crtc,imx_ldb root@mx6q:~# rmmod dw_hdmi_imx root@mx6q:~# lsmod | grep i2c i2c_imx 10213 -1 ^^^^^ root@mx6q:~# rmmod i2c_imx rmmod: ERROR: Module i2c_imx is in use To fix existing users of these interfaces and to avoid any further confusion and misusage in future, add one more interface of_get_i2c_adapter_by_node(), it is similar to i2c_get_adapter() in sense that an I2C bus device driver found and locked by user can be correctly unlocked by i2c_put_adapter(). Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 18 ++++++++++++++++++ include/linux/i2c.h | 7 +++++++ 2 files changed, 25 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index f80992d0a608..07a83f34ed58 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1371,6 +1371,24 @@ struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node) return adapter; } EXPORT_SYMBOL(of_find_i2c_adapter_by_node); + +/* must call i2c_put_adapter() when done with returned i2c_adapter device */ +struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node) +{ + struct i2c_adapter *adapter; + + adapter = of_find_i2c_adapter_by_node(node); + if (!adapter) + return NULL; + + if (!try_module_get(adapter->owner)) { + put_device(&adapter->dev); + adapter = NULL; + } + + return adapter; +} +EXPORT_SYMBOL(of_get_i2c_adapter_by_node); #else static void of_i2c_register_devices(struct i2c_adapter *adap) { } #endif /* CONFIG_OF */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index e83a738a3b87..e2c859b74f8b 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -638,6 +638,8 @@ extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node); /* must call put_device() when done with returned i2c_adapter device */ extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node); +/* must call i2c_put_adapter() when done with returned i2c_adapter device */ +struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node); #else static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) @@ -649,6 +651,11 @@ static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node { return NULL; } + +static inline struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node) +{ + return NULL; +} #endif /* CONFIG_OF */ #endif /* _LINUX_I2C_H */ -- cgit v1.2.3 From 0d1ad98dd837c069572d16faf77fa7f50748c7d5 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 27 Jul 2015 17:30:51 +0300 Subject: i2c: arb-gpio-challenge: use of_get_i2c_adapter_by_node interface This change is needed to properly lock I2C parent bus driver. Prior to this change i2c_put_adapter() is misused, which may lead to an overflow over zero of I2C bus driver user counter. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 5cf1b60b69e2..71aac0911bf7 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -196,7 +196,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) dev_err(dev, "Cannot parse i2c-parent\n"); return -EINVAL; } - arb->parent = of_find_i2c_adapter_by_node(parent_np); + arb->parent = of_get_i2c_adapter_by_node(parent_np); if (!arb->parent) { dev_err(dev, "Cannot find parent bus\n"); return -EPROBE_DEFER; -- cgit v1.2.3 From fb427466dcde21fc4aab27153735bdd5c62b422d Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 7 Aug 2015 14:53:03 +0300 Subject: i2c: designware: Make debug print in i2c_dw_isr() shorter Printing adapter name is irrelevant from this debug print and makes output needlessly long. Having already device and functions names printed here is enough for debugging. While at it remove extra space from "enabled= 0x" and use "%#x" for printing "0x" prefixed hexadecimal values. Signed-off-by: Jarkko Nikula [wsa: made it a oneliner] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 6f19a33773fe..7441cdc1b34a 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -777,8 +777,7 @@ irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) enabled = dw_readl(dev, DW_IC_ENABLE); stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); - dev_dbg(dev->dev, "%s: %s enabled= 0x%x stat=0x%x\n", __func__, - dev->adapter.name, enabled, stat); + dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat); if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) return IRQ_NONE; -- cgit v1.2.3 From c49c1f0873faddf78c3545a8e25dfe23e8d15c2f Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 7 Aug 2015 14:04:19 +0200 Subject: misc: eeprom: Export I2C module alias information in missing drivers The I2C core always reports the MODALIAS uevent as "i2c:" regardless if the driver later is match using the I2C id_table or the of_match_table. So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the correct module when the device is added. Signed-off-by: Javier Martinez Canillas Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- drivers/misc/eeprom/max6875.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c index 580ff9df5529..c74920cc3d18 100644 --- a/drivers/misc/eeprom/max6875.c +++ b/drivers/misc/eeprom/max6875.c @@ -197,6 +197,7 @@ static const struct i2c_device_id max6875_id[] = { { "max6875", 0 }, { } }; +MODULE_DEVICE_TABLE(i2c, max6875_id); static struct i2c_driver max6875_driver = { .driver = { -- cgit v1.2.3 From a1f64317bbf5febe4c763cd6e022d533a802b847 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 21 Jul 2015 16:14:36 +0900 Subject: i2c: cadence: set THIS_MODULE to the owner of the adapter The owner of the adapter is missing, while this driver is tristate. Signed-off-by: Masahiro Yamada Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cadence.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 18e48ae4a60d..84deed6571bd 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -896,6 +896,7 @@ static int cdns_i2c_probe(struct platform_device *pdev) id->irq = platform_get_irq(pdev, 0); + id->adap.owner = THIS_MODULE; id->adap.dev.of_node = pdev->dev.of_node; id->adap.algo = &cdns_i2c_algo; id->adap.timeout = CDNS_I2C_TIMEOUT; -- cgit v1.2.3 From 66621f96c95175cc64d91dd213781bf65bbf8ec4 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 17 Jul 2015 13:01:23 +0100 Subject: i2c: viperboard: clean up inconsistent indenting Minor clean up of indenting, no functional change Signed-off-by: Colin Ian King [wsa: squashed two lines into one] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-viperboard.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c index 47e88adf2011..543456a0a338 100644 --- a/drivers/i2c/busses/i2c-viperboard.c +++ b/drivers/i2c/busses/i2c-viperboard.c @@ -391,11 +391,11 @@ static int vprbrd_i2c_probe(struct platform_device *pdev) VPRBRD_USB_REQUEST_I2C_FREQ, VPRBRD_USB_TYPE_OUT, 0x0000, 0x0000, &vb_i2c->bus_freq_param, 1, VPRBRD_USB_TIMEOUT_MS); - if (ret != 1) { - dev_err(&pdev->dev, - "failure setting i2c_bus_freq to %d\n", i2c_bus_freq); - return -EIO; - } + if (ret != 1) { + dev_err(&pdev->dev, "failure setting i2c_bus_freq to %d\n", + i2c_bus_freq); + return -EIO; + } } else { dev_err(&pdev->dev, "invalid i2c_bus_freq setting:%d\n", i2c_bus_freq); -- cgit v1.2.3 From ea89ef1f7bf7c71b4f533a6ffb3f6f124890b37b Mon Sep 17 00:00:00 2001 From: Eddie Huang Date: Thu, 6 Aug 2015 15:22:10 +0800 Subject: i2c: mediatek: Reset DMA engine in hardware init function Reset DMA in hardware init function to avoid unknown hardware state before do any I2C operation. Signed-off-by: Liguo Zhang Signed-off-by: Eddie Huang Reviewed-by: Daniel Kurtz Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 9920eef74672..e28ad4c17d3d 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -59,6 +59,7 @@ #define I2C_DMA_START_EN 0x0001 #define I2C_DMA_INT_FLAG_NONE 0x0000 #define I2C_DMA_CLR_FLAG 0x0000 +#define I2C_DMA_HARD_RST 0x0002 #define I2C_DEFAULT_SPEED 100000 /* hz */ #define MAX_FS_MODE_SPEED 400000 @@ -81,6 +82,7 @@ enum DMA_REGS_OFFSET { OFFSET_INT_FLAG = 0x0, OFFSET_INT_EN = 0x04, OFFSET_EN = 0x08, + OFFSET_RST = 0x0c, OFFSET_CON = 0x18, OFFSET_TX_MEM_ADDR = 0x1c, OFFSET_RX_MEM_ADDR = 0x20, @@ -262,6 +264,10 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN; writew(control_reg, i2c->base + OFFSET_CONTROL); writew(I2C_DELAY_LEN, i2c->base + OFFSET_DELAY_LEN); + + writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST); + udelay(50); + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST); } /* -- cgit v1.2.3 From 28c0a8433dd56146627d00907ad99084654741e8 Mon Sep 17 00:00:00 2001 From: Eddie Huang Date: Thu, 6 Aug 2015 15:22:11 +0800 Subject: i2c: mediatek: Fixup i2c ack error interrupt handling When occur i2c ack error, i2c controller generate two interrupts, first is the ack error interrupt, then the complete interrupt. i2c interrupt handler should keep the two interrupt value, and only call complete() for the complete interrupt. Signed-off-by: Liguo Zhang Signed-off-by: Eddie Huang Reviewed-by: Daniel Kurtz Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mt65xx.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index e28ad4c17d3d..c02e6c018c39 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -557,15 +557,22 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) { struct mtk_i2c *i2c = dev_id; u16 restart_flag = 0; + u16 intr_stat; if (i2c->dev_comp->auto_restart) restart_flag = I2C_RS_TRANSFER; - i2c->irq_stat = readw(i2c->base + OFFSET_INTR_STAT); - writew(restart_flag | I2C_HS_NACKERR | I2C_ACKERR - | I2C_TRANSAC_COMP, i2c->base + OFFSET_INTR_STAT); + intr_stat = readw(i2c->base + OFFSET_INTR_STAT); + writew(intr_stat, i2c->base + OFFSET_INTR_STAT); - complete(&i2c->msg_complete); + /* + * when occurs ack error, i2c controller generate two interrupts + * first is the ack error interrupt, then the complete interrupt + * i2c->irq_stat need keep the two interrupt value. + */ + i2c->irq_stat |= intr_stat; + if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag)) + complete(&i2c->msg_complete); return IRQ_HANDLED; } -- cgit v1.2.3 From da899f55b359225f85e154765baaddb13ec436ca Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 18 May 2015 21:09:12 +0200 Subject: i2c: apply address offset for slaves, too We want a separate address range for being an I2C slave. Add an offset of 0x1000, so it can be combined with ten bit addresses as well. Add a separate function to create the address value, we will need it later in other places. Tested-by: Andrey Danin Acked-by: Stephen Warren Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 07a83f34ed58..47dbe2514741 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -57,6 +57,9 @@ #define CREATE_TRACE_POINTS #include +#define I2C_ADDR_OFFSET_TEN_BIT 0xa000 +#define I2C_ADDR_OFFSET_SLAVE 0x1000 + /* core_lock protects i2c_adapter_idr, and guarantees that device detection, deletion of detected devices, and attach_adapter calls are serialized */ @@ -778,6 +781,21 @@ struct i2c_client *i2c_verify_client(struct device *dev) EXPORT_SYMBOL(i2c_verify_client); +/* Return a unique address which takes the flags of the client into account */ +static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client) +{ + unsigned short addr = client->addr; + + /* For some client flags, add an arbitrary offset to avoid collisions */ + if (client->flags & I2C_CLIENT_TEN) + addr |= I2C_ADDR_OFFSET_TEN_BIT; + + if (client->flags & I2C_CLIENT_SLAVE) + addr |= I2C_ADDR_OFFSET_SLAVE; + + return addr; +} + /* This is a permissive address validity check, I2C address map constraints * are purposely not enforced, except for the general call address. */ static int i2c_check_client_addr_validity(const struct i2c_client *client) @@ -923,10 +941,8 @@ static void i2c_dev_set_name(struct i2c_adapter *adap, return; } - /* For 10-bit clients, add an arbitrary offset to avoid collisions */ dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap), - client->addr | ((client->flags & I2C_CLIENT_TEN) - ? 0xa000 : 0)); + i2c_encode_flags_to_addr(client)); } /** -- cgit v1.2.3 From 66be6056eba80690bb7fa3d983c21494e1950bea Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 17 Jul 2015 12:43:22 +0200 Subject: i2c: rename address check functions The current naming is based on the arguments of the functions and not on what they do. Even I as the maintainer find this confusing, so let's rename them to something more descriptive. Tested-by: Andrey Danin Acked-by: Stephen Warren Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 47dbe2514741..fced494040a8 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -798,7 +798,7 @@ static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client) /* This is a permissive address validity check, I2C address map constraints * are purposely not enforced, except for the general call address. */ -static int i2c_check_client_addr_validity(const struct i2c_client *client) +static int i2c_check_addr_validity(const struct i2c_client *client) { if (client->flags & I2C_CLIENT_TEN) { /* 10-bit address, all values are valid */ @@ -816,7 +816,7 @@ static int i2c_check_client_addr_validity(const struct i2c_client *client) * device uses a reserved address, then it shouldn't be probed. 7-bit * addressing is assumed, 10-bit address devices are rare and should be * explicitly enumerated. */ -static int i2c_check_addr_validity(unsigned short addr) +static int i2c_check_7bit_addr_validity_strict(unsigned short addr) { /* * Reserved addresses per I2C specification: @@ -985,7 +985,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) strlcpy(client->name, info->type, sizeof(client->name)); /* Check for address validity */ - status = i2c_check_client_addr_validity(client); + status = i2c_check_addr_validity(client); if (status) { dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n", client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr); @@ -2296,7 +2296,7 @@ static int i2c_detect_address(struct i2c_client *temp_client, int err; /* Make sure the address is valid */ - err = i2c_check_addr_validity(addr); + err = i2c_check_7bit_addr_validity_strict(addr); if (err) { dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n", addr); @@ -2413,7 +2413,7 @@ i2c_new_probed_device(struct i2c_adapter *adap, for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) { /* Check address validity */ - if (i2c_check_addr_validity(addr_list[i]) < 0) { + if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) { dev_warn(&adap->dev, "Invalid 7-bit address " "0x%02x\n", addr_list[i]); continue; @@ -2997,7 +2997,7 @@ int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) if (!(client->flags & I2C_CLIENT_TEN)) { /* Enforce stricter address checking */ - ret = i2c_check_addr_validity(client->addr); + ret = i2c_check_7bit_addr_validity_strict(client->addr); if (ret) { dev_err(&client->dev, "%s: invalid address\n", __func__); return ret; -- cgit v1.2.3 From c4019b7040eaf88f440ce5212e055a4f19b1b541 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 17 Jul 2015 12:50:06 +0200 Subject: i2c: make address check indpendent from client struct We want to use this function with struct boardinfo soon, so let's just pass the parameters really needed. We also extend the type of addr, so more types can be input. Remove a superfluous dangling comment while here. Tested-by: Andrey Danin Acked-by: Stephen Warren Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index fced494040a8..4ffe06451081 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -798,15 +798,15 @@ static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client) /* This is a permissive address validity check, I2C address map constraints * are purposely not enforced, except for the general call address. */ -static int i2c_check_addr_validity(const struct i2c_client *client) +static int i2c_check_addr_validity(unsigned addr, unsigned short flags) { - if (client->flags & I2C_CLIENT_TEN) { + if (flags & I2C_CLIENT_TEN) { /* 10-bit address, all values are valid */ - if (client->addr > 0x3ff) + if (addr > 0x3ff) return -EINVAL; } else { /* 7-bit address, reject the general call address */ - if (client->addr == 0x00 || client->addr > 0x7f) + if (addr == 0x00 || addr > 0x7f) return -EINVAL; } return 0; @@ -984,8 +984,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) strlcpy(client->name, info->type, sizeof(client->name)); - /* Check for address validity */ - status = i2c_check_addr_validity(client); + status = i2c_check_addr_validity(client->addr, client->flags); if (status) { dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n", client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr); -- cgit v1.2.3 From b4e2f6ac1281cd3e066919cc762eef4924e9fcc5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 19 May 2015 21:04:40 +0200 Subject: i2c: apply DT flags when probing Check for slave and 10-bit flags when probing and mark the client when found. Improve the address validity check, too Tested-by: Andrey Danin Acked-by: Stephen Warren Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 4ffe06451081..7b18f31bf6c6 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -27,6 +27,7 @@ I2C slave support (c) 2014 by Wolfram Sang */ +#include #include #include #include @@ -1288,7 +1289,8 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, struct i2c_client *result; struct i2c_board_info info = {}; struct dev_archdata dev_ad = {}; - const __be32 *addr; + const __be32 *addr_be; + u32 addr; int len; dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name); @@ -1299,20 +1301,31 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap, return ERR_PTR(-EINVAL); } - addr = of_get_property(node, "reg", &len); - if (!addr || (len < sizeof(*addr))) { + addr_be = of_get_property(node, "reg", &len); + if (!addr_be || (len < sizeof(*addr_be))) { dev_err(&adap->dev, "of_i2c: invalid reg on %s\n", node->full_name); return ERR_PTR(-EINVAL); } - info.addr = be32_to_cpup(addr); - if (info.addr > (1 << 10) - 1) { + addr = be32_to_cpup(addr_be); + if (addr & I2C_TEN_BIT_ADDRESS) { + addr &= ~I2C_TEN_BIT_ADDRESS; + info.flags |= I2C_CLIENT_TEN; + } + + if (addr & I2C_OWN_SLAVE_ADDRESS) { + addr &= ~I2C_OWN_SLAVE_ADDRESS; + info.flags |= I2C_CLIENT_SLAVE; + } + + if (i2c_check_addr_validity(addr, info.flags)) { dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n", info.addr, node->full_name); return ERR_PTR(-EINVAL); } + info.addr = addr; info.of_node = of_node_get(node); info.archdata = &dev_ad; -- cgit v1.2.3 From 9bccc70a127cfe2a13e34d6b6e7300caae113f8f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 17 Jul 2015 14:48:56 +0200 Subject: i2c: take address space into account when checking for used addresses It is not enough to compare the plain address value, we also need to check the flags enabling a different address space. E.g. it is valid to have address 0x50 as a 7-bit address and 0x050 as 10-bit address on the same bus. Same for addresses when we are the slave. Tested-by: Andrey Danin Acked-by: Stephen Warren Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 7b18f31bf6c6..fc6d89316144 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -839,7 +839,7 @@ static int __i2c_check_addr_busy(struct device *dev, void *addrp) struct i2c_client *client = i2c_verify_client(dev); int addr = *(int *)addrp; - if (client && client->addr == addr) + if (client && i2c_encode_flags_to_addr(client) == addr) return -EBUSY; return 0; } @@ -993,7 +993,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) } /* Check for address business */ - status = i2c_check_addr_busy(adap, client->addr); + status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client)); if (status) goto out_err; @@ -2315,7 +2315,7 @@ static int i2c_detect_address(struct i2c_client *temp_client, return err; } - /* Skip if already in use */ + /* Skip if already in use (7 bit, no need to encode flags) */ if (i2c_check_addr_busy(adapter, addr)) return 0; @@ -2431,7 +2431,7 @@ i2c_new_probed_device(struct i2c_adapter *adap, continue; } - /* Check address availability */ + /* Check address availability (7 bit, no need to encode flags) */ if (i2c_check_addr_busy(adap, addr_list[i])) { dev_dbg(&adap->dev, "Address 0x%02x already in " "use, not probing\n", addr_list[i]); -- cgit v1.2.3 From cfa0327b0d03091e0c47249c080e50e287be762d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 27 Jul 2015 14:03:38 +0200 Subject: i2c: support 10 bit and slave addresses in sysfs 'new_device' We now have seperate address spaces for 10 bit and we-are-slave clients. Update the sysfs device instantiation method to support these types by accepting the address offsets that are assigned to the extra address spaces. Update the documentation, too. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- Documentation/i2c/slave-interface | 9 ++++++--- Documentation/i2c/ten-bit-addresses | 4 ++++ drivers/i2c/i2c-core.c | 12 +++++++++++- 3 files changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface index 2dee4e2d62df..61ed05cd9531 100644 --- a/Documentation/i2c/slave-interface +++ b/Documentation/i2c/slave-interface @@ -31,10 +31,13 @@ User manual =========== I2C slave backends behave like standard I2C clients. So, you can instantiate -them as described in the document 'instantiating-devices'. A quick example for -instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1: +them as described in the document 'instantiating-devices'. The only difference +is that i2c slave backends have their own address space. So, you have to add +0x1000 to the address you would originally request. An example for +instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64 +on bus 1: - # echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device + # echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device Each backend should come with separate documentation to describe its specific behaviour and setup. diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses index cdfe13901b99..7b2d11e53a49 100644 --- a/Documentation/i2c/ten-bit-addresses +++ b/Documentation/i2c/ten-bit-addresses @@ -2,6 +2,10 @@ The I2C protocol knows about two kinds of device addresses: normal 7 bit addresses, and an extended set of 10 bit addresses. The sets of addresses do not intersect: the 7 bit address 0x10 is not the same as the 10 bit address 0x10 (though a single device could respond to both of them). +To avoid ambiguity, the user sees 10 bit addresses mapped to a different +address space, namely 0xa000-0xa3ff. The leading 0xa (= 10) represents the +10 bit mode. This is used for creating device names in sysfs. It is also +needed when instantiating 10 bit devices via the new_device file in sysfs. I2C messages to and from 10-bit address devices have a different format. See the I2C specification for the details. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index fc6d89316144..039817eaecb5 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1158,6 +1158,16 @@ i2c_sysfs_new_device(struct device *dev, struct device_attribute *attr, return -EINVAL; } + if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) { + info.addr &= ~I2C_ADDR_OFFSET_TEN_BIT; + info.flags |= I2C_CLIENT_TEN; + } + + if (info.addr & I2C_ADDR_OFFSET_SLAVE) { + info.addr &= ~I2C_ADDR_OFFSET_SLAVE; + info.flags |= I2C_CLIENT_SLAVE; + } + client = i2c_new_device(adap, &info); if (!client) return -EINVAL; @@ -1209,7 +1219,7 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, i2c_adapter_depth(adap)); list_for_each_entry_safe(client, next, &adap->userspace_clients, detected) { - if (client->addr == addr) { + if (i2c_encode_flags_to_addr(client) == addr) { dev_info(dev, "%s: Deleting device %s at 0x%02hx\n", "delete_device", client->name, client->addr); -- cgit v1.2.3 From c6909d6f6f1082b8bb4c1b0ef3460a005c9dcb4d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 5 Aug 2015 21:12:54 +0200 Subject: i2c: slave: print warning if slave flag not set Address collisions will be rare, but we should let the user know that slaves have their own address space nonetheless. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 039817eaecb5..a6780289c61d 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -3017,6 +3017,10 @@ int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) return -EINVAL; } + if (!(client->flags & I2C_CLIENT_SLAVE)) + dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n", + __func__); + if (!(client->flags & I2C_CLIENT_TEN)) { /* Enforce stricter address checking */ ret = i2c_check_7bit_addr_validity_strict(client->addr); -- cgit v1.2.3 From b3fdd32799d834e2626fae087906e886037350c6 Mon Sep 17 00:00:00 2001 From: York Sun Date: Mon, 17 Aug 2015 11:53:48 -0700 Subject: i2c: mux: Add register-based mux i2c-mux-reg Based on i2c-mux-gpio driver, similarly the register-based mux switch from one bus to another by setting a single register. The register can be on PCIe bus, local bus, or any memory-mapped address. The endianness of such register can be specified in device tree if used, or in platform data. Signed-off-by: York Sun Acked-by: Alexander Sverdlin Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-mux-reg.txt | 74 ++++++ drivers/i2c/muxes/Kconfig | 11 + drivers/i2c/muxes/Makefile | 1 + drivers/i2c/muxes/i2c-mux-reg.c | 294 +++++++++++++++++++++ include/linux/platform_data/i2c-mux-reg.h | 44 +++ 5 files changed, 424 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt create mode 100644 drivers/i2c/muxes/i2c-mux-reg.c create mode 100644 include/linux/platform_data/i2c-mux-reg.h (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt new file mode 100644 index 000000000000..688783fbe696 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt @@ -0,0 +1,74 @@ +Register-based I2C Bus Mux + +This binding describes an I2C bus multiplexer that uses a single register +to route the I2C signals. + +Required properties: +- compatible: i2c-mux-reg +- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side + port is connected to. +* Standard I2C mux properties. See mux.txt in this directory. +* I2C child bus nodes. See mux.txt in this directory. + +Optional properties: +- reg: this pair of specifies the register to control the mux. + The depends on its parent node. It can be any memory-mapped + address. The size must be either 1, 2, or 4 bytes. If reg is omitted, the + resource of this device will be used. +- little-endian: The existence indicates the register is in little endian. +- big-endian: The existence indicates the register is in big endian. + If both little-endian and big-endian are omitted, the endianness of the + CPU will be used. +- write-only: The existence indicates the register is write-only. +- idle-state: value to set the muxer to when idle. When no value is + given, it defaults to the last value used. + +Whenever an access is made to a device on a child bus, the value set +in the revelant node's reg property will be output to the register. + +If an idle state is defined, using the idle-state (optional) property, +whenever an access is not being made to a device on a child bus, the +register will be set according to the idle value. + +If an idle state is not defined, the most recently used value will be +left programmed into the register. + +Example of a mux on PCIe card, the host is a powerpc SoC (big endian): + + i2c-mux { + /* the depends on the address translation + * of the parent device. If omitted, device resource + * will be used instead. The size is to determine + * whether iowrite32, iowrite16, or iowrite8 will be used. + */ + reg = <0x6028 0x4>; + little-endian; /* little endian register on PCIe */ + compatible = "i2c-mux-reg"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c1>; + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + si5338: clock-generator@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + /* other stuff */ + }; + }; + + i2c@1 { + /* data is written using iowrite32 */ + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + si5338: clock-generator@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + /* other stuff */ + }; + }; + }; diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index fdd0769c84a3..f06b0e24673b 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -61,4 +61,15 @@ config I2C_MUX_PINCTRL This driver can also be built as a module. If so, the module will be called pinctrl-i2cmux. +config I2C_MUX_REG + tristate "Register-based I2C multiplexer" + help + If you say yes to this option, support will be included for a + register based I2C multiplexer. This driver provides access to + I2C busses connected through a MUX, which is controlled + by a single register. + + This driver can also be built as a module. If so, the module + will be called i2c-mux-reg. + endmenu diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile index 465778b5d5dc..e89799b76a92 100644 --- a/drivers/i2c/muxes/Makefile +++ b/drivers/i2c/muxes/Makefile @@ -7,5 +7,6 @@ obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o +obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c new file mode 100644 index 000000000000..86d41d36a783 --- /dev/null +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -0,0 +1,294 @@ +/* + * I2C multiplexer using a single register + * + * Copyright 2015 Freescale Semiconductor + * York Sun + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct regmux { + struct i2c_adapter *parent; + struct i2c_adapter **adap; /* child busses */ + struct i2c_mux_reg_platform_data data; +}; + +static int i2c_mux_reg_set(const struct regmux *mux, unsigned int chan_id) +{ + if (!mux->data.reg) + return -EINVAL; + + switch (mux->data.reg_size) { + case 4: + if (mux->data.little_endian) { + iowrite32(chan_id, mux->data.reg); + if (!mux->data.write_only) + ioread32(mux->data.reg); + } else { + iowrite32be(chan_id, mux->data.reg); + if (!mux->data.write_only) + ioread32(mux->data.reg); + } + break; + case 2: + if (mux->data.little_endian) { + iowrite16(chan_id, mux->data.reg); + if (!mux->data.write_only) + ioread16(mux->data.reg); + } else { + iowrite16be(chan_id, mux->data.reg); + if (!mux->data.write_only) + ioread16be(mux->data.reg); + } + break; + case 1: + iowrite8(chan_id, mux->data.reg); + if (!mux->data.write_only) + ioread8(mux->data.reg); + break; + default: + pr_err("Invalid register size\n"); + return -EINVAL; + } + + return 0; +} + +static int i2c_mux_reg_select(struct i2c_adapter *adap, void *data, + unsigned int chan) +{ + struct regmux *mux = data; + + return i2c_mux_reg_set(mux, chan); +} + +static int i2c_mux_reg_deselect(struct i2c_adapter *adap, void *data, + unsigned int chan) +{ + struct regmux *mux = data; + + if (mux->data.idle_in_use) + return i2c_mux_reg_set(mux, mux->data.idle); + + return 0; +} + +#ifdef CONFIG_OF +static int i2c_mux_reg_probe_dt(struct regmux *mux, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *adapter_np, *child; + struct i2c_adapter *adapter; + struct resource res; + unsigned *values; + int i = 0; + + if (!np) + return -ENODEV; + + adapter_np = of_parse_phandle(np, "i2c-parent", 0); + if (!adapter_np) { + dev_err(&pdev->dev, "Cannot parse i2c-parent\n"); + return -ENODEV; + } + adapter = of_find_i2c_adapter_by_node(adapter_np); + if (!adapter) + return -EPROBE_DEFER; + + mux->parent = adapter; + mux->data.parent = i2c_adapter_id(adapter); + put_device(&adapter->dev); + + mux->data.n_values = of_get_child_count(np); + if (of_find_property(np, "little-endian", NULL)) { + mux->data.little_endian = true; + } else if (of_find_property(np, "big-endian", NULL)) { + mux->data.little_endian = false; + } else { +#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : \ + defined(__LITTLE_ENDIAN) + mux->data.little_endian = true; +#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : \ + defined(__BIG_ENDIAN) + mux->data.little_endian = false; +#else +#error Endianness not defined? +#endif + } + if (of_find_property(np, "write-only", NULL)) + mux->data.write_only = true; + else + mux->data.write_only = false; + + values = devm_kzalloc(&pdev->dev, + sizeof(*mux->data.values) * mux->data.n_values, + GFP_KERNEL); + if (!values) { + dev_err(&pdev->dev, "Cannot allocate values array"); + return -ENOMEM; + } + + for_each_child_of_node(np, child) { + of_property_read_u32(child, "reg", values + i); + i++; + } + mux->data.values = values; + + if (!of_property_read_u32(np, "idle-state", &mux->data.idle)) + mux->data.idle_in_use = true; + + /* map address from "reg" if exists */ + if (of_address_to_resource(np, 0, &res)) { + mux->data.reg_size = resource_size(&res); + if (mux->data.reg_size > 4) { + dev_err(&pdev->dev, "Invalid address size\n"); + return -EINVAL; + } + mux->data.reg = devm_ioremap_resource(&pdev->dev, &res); + if (IS_ERR(mux->data.reg)) + return PTR_ERR(mux->data.reg); + } + + return 0; +} +#else +static int i2c_mux_reg_probe_dt(struct gpiomux *mux, + struct platform_device *pdev) +{ + return 0; +} +#endif + +static int i2c_mux_reg_probe(struct platform_device *pdev) +{ + struct regmux *mux; + struct i2c_adapter *parent; + struct resource *res; + int (*deselect)(struct i2c_adapter *, void *, u32); + unsigned int class; + int i, ret, nr; + + mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + platform_set_drvdata(pdev, mux); + + if (dev_get_platdata(&pdev->dev)) { + memcpy(&mux->data, dev_get_platdata(&pdev->dev), + sizeof(mux->data)); + + parent = i2c_get_adapter(mux->data.parent); + if (!parent) + return -EPROBE_DEFER; + + mux->parent = parent; + } else { + ret = i2c_mux_reg_probe_dt(mux, pdev); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing device tree"); + return ret; + } + } + + if (!mux->data.reg) { + dev_info(&pdev->dev, + "Register not set, using platform resource\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mux->data.reg_size = resource_size(res); + if (mux->data.reg_size > 4) { + dev_err(&pdev->dev, "Invalid resource size\n"); + return -EINVAL; + } + mux->data.reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mux->data.reg)) + return PTR_ERR(mux->data.reg); + } + + mux->adap = devm_kzalloc(&pdev->dev, + sizeof(*mux->adap) * mux->data.n_values, + GFP_KERNEL); + if (!mux->adap) { + dev_err(&pdev->dev, "Cannot allocate i2c_adapter structure"); + return -ENOMEM; + } + + if (mux->data.idle_in_use) + deselect = i2c_mux_reg_deselect; + else + deselect = NULL; + + for (i = 0; i < mux->data.n_values; i++) { + nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0; + class = mux->data.classes ? mux->data.classes[i] : 0; + + mux->adap[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev, mux, + nr, mux->data.values[i], + class, i2c_mux_reg_select, + deselect); + if (!mux->adap[i]) { + ret = -ENODEV; + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + + dev_dbg(&pdev->dev, "%d port mux on %s adapter\n", + mux->data.n_values, mux->parent->name); + + return 0; + +add_adapter_failed: + for (; i > 0; i--) + i2c_del_mux_adapter(mux->adap[i - 1]); + + return ret; +} + +static int i2c_mux_reg_remove(struct platform_device *pdev) +{ + struct regmux *mux = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < mux->data.n_values; i++) + i2c_del_mux_adapter(mux->adap[i]); + + i2c_put_adapter(mux->parent); + + return 0; +} + +static const struct of_device_id i2c_mux_reg_of_match[] = { + { .compatible = "i2c-mux-reg", }, + {}, +}; +MODULE_DEVICE_TABLE(of, i2c_mux_reg_of_match); + +static struct platform_driver i2c_mux_reg_driver = { + .probe = i2c_mux_reg_probe, + .remove = i2c_mux_reg_remove, + .driver = { + .name = "i2c-mux-reg", + }, +}; + +module_platform_driver(i2c_mux_reg_driver); + +MODULE_DESCRIPTION("Register-based I2C multiplexer driver"); +MODULE_AUTHOR("York Sun "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:i2c-mux-reg"); diff --git a/include/linux/platform_data/i2c-mux-reg.h b/include/linux/platform_data/i2c-mux-reg.h new file mode 100644 index 000000000000..c68712aadf43 --- /dev/null +++ b/include/linux/platform_data/i2c-mux-reg.h @@ -0,0 +1,44 @@ +/* + * I2C multiplexer using a single register + * + * Copyright 2015 Freescale Semiconductor + * York Sun + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __LINUX_PLATFORM_DATA_I2C_MUX_REG_H +#define __LINUX_PLATFORM_DATA_I2C_MUX_REG_H + +/** + * struct i2c_mux_reg_platform_data - Platform-dependent data for i2c-mux-reg + * @parent: Parent I2C bus adapter number + * @base_nr: Base I2C bus number to number adapters from or zero for dynamic + * @values: Array of value for each channel + * @n_values: Number of multiplexer channels + * @little_endian: Indicating if the register is in little endian + * @write_only: Reading the register is not allowed by hardware + * @classes: Optional I2C auto-detection classes + * @idle: Value to write to mux when idle + * @idle_in_use: indicate if idle value is in use + * @reg: Virtual address of the register to switch channel + * @reg_size: register size in bytes + */ +struct i2c_mux_reg_platform_data { + int parent; + int base_nr; + const unsigned int *values; + int n_values; + bool little_endian; + bool write_only; + const unsigned int *classes; + u32 idle; + bool idle_in_use; + void __iomem *reg; + resource_size_t reg_size; +}; + +#endif /* __LINUX_PLATFORM_DATA_I2C_MUX_REG_H */ -- cgit v1.2.3 From 3f9c37a0c9a59db97ca5712eca7838b842949047 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Sun, 16 Aug 2015 20:10:16 +0200 Subject: i2c: lpc2k: add driver Add support for the I2C controller found on several NXP devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx. The controller is implemented as a state machine and the driver act upon the state changes when the bus is accessed. The I2C controller supports master/slave operation, bus arbitration, programmable clock rate, and speeds up to 1 Mbit/s. Signed-off-by: Joachim Eastwood Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-lpc2k.txt | 33 ++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-lpc2k.c | 513 +++++++++++++++++++++ 4 files changed, 557 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt create mode 100644 drivers/i2c/busses/i2c-lpc2k.c (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt new file mode 100644 index 000000000000..4101aa621ad4 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt @@ -0,0 +1,33 @@ +NXP I2C controller for LPC2xxx/178x/18xx/43xx + +Required properties: + - compatible: must be "nxp,lpc1788-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + +Optional properties: +- clock-frequency: the desired I2C bus clock frequency in Hz; in + absence of this property the default value is used (100 kHz). + +Example: +i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c0 { + clock-frequency = <400000>; + + lm75@48 { + compatible = "nxp,lm75"; + reg = <0x48>; + }; +}; + diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 0b798ae708fe..48f4b796003c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -619,6 +619,16 @@ config I2C_KEMPLD This driver can also be built as a module. If so, the module will be called i2c-kempld. +config I2C_LPC2K + tristate "I2C bus support for NXP LPC2K/LPC178x/18xx/43xx" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + help + This driver supports the I2C interface found several NXP + devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx. + + This driver can also be built as a module. If so, the module + will be called i2c-lpc2k. + config I2C_MESON tristate "Amlogic Meson I2C controller" depends on ARCH_MESON diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 50e8bbb65f1c..6df3b303bd09 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o +obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o obj-$(CONFIG_I2C_MESON) += i2c-meson.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MT65XX) += i2c-mt65xx.o diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c new file mode 100644 index 000000000000..8560a13bf1b3 --- /dev/null +++ b/drivers/i2c/busses/i2c-lpc2k.c @@ -0,0 +1,513 @@ +/* + * Copyright (C) 2011 NXP Semiconductors + * + * Code portions referenced from the i2x-pxa and i2c-pnx drivers + * + * Make SMBus byte and word transactions work on LPC178x/7x + * Copyright (c) 2012 + * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com + * Anton Protopopov, Emcraft Systems, antonp@emcraft.com + * + * Copyright (C) 2015 Joachim Eastwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* LPC24xx register offsets and bits */ +#define LPC24XX_I2CONSET 0x00 +#define LPC24XX_I2STAT 0x04 +#define LPC24XX_I2DAT 0x08 +#define LPC24XX_I2ADDR 0x0c +#define LPC24XX_I2SCLH 0x10 +#define LPC24XX_I2SCLL 0x14 +#define LPC24XX_I2CONCLR 0x18 + +#define LPC24XX_AA BIT(2) +#define LPC24XX_SI BIT(3) +#define LPC24XX_STO BIT(4) +#define LPC24XX_STA BIT(5) +#define LPC24XX_I2EN BIT(6) + +#define LPC24XX_STO_AA (LPC24XX_STO | LPC24XX_AA) +#define LPC24XX_CLEAR_ALL (LPC24XX_AA | LPC24XX_SI | LPC24XX_STO | \ + LPC24XX_STA | LPC24XX_I2EN) + +/* I2C SCL clock has different duty cycle depending on mode */ +#define I2C_STD_MODE_DUTY 46 +#define I2C_FAST_MODE_DUTY 36 +#define I2C_FAST_MODE_PLUS_DUTY 38 + +/* + * 26 possible I2C status codes, but codes applicable only + * to master are listed here and used in this driver + */ +enum { + M_BUS_ERROR = 0x00, + M_START = 0x08, + M_REPSTART = 0x10, + MX_ADDR_W_ACK = 0x18, + MX_ADDR_W_NACK = 0x20, + MX_DATA_W_ACK = 0x28, + MX_DATA_W_NACK = 0x30, + M_DATA_ARB_LOST = 0x38, + MR_ADDR_R_ACK = 0x40, + MR_ADDR_R_NACK = 0x48, + MR_DATA_R_ACK = 0x50, + MR_DATA_R_NACK = 0x58, + M_I2C_IDLE = 0xf8, +}; + +struct lpc2k_i2c { + void __iomem *base; + struct clk *clk; + int irq; + wait_queue_head_t wait; + struct i2c_adapter adap; + struct i2c_msg *msg; + int msg_idx; + int msg_status; + int is_last; +}; + +static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c) +{ + /* Will force clear all statuses */ + writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR); + writel(0, i2c->base + LPC24XX_I2ADDR); + writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET); +} + +static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + /* + * If the transfer needs to abort for some reason, we'll try to + * force a stop condition to clear any pending bus conditions + */ + writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET); + + /* Wait for status change */ + while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) { + if (time_after(jiffies, timeout)) { + /* Bus was not idle, try to reset adapter */ + i2c_lpc2k_reset(i2c); + return -EBUSY; + } + + cpu_relax(); + } + + return 0; +} + +static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c) +{ + unsigned char data; + u32 status; + + /* + * I2C in the LPC2xxx series is basically a state machine. + * Just run through the steps based on the current status. + */ + status = readl(i2c->base + LPC24XX_I2STAT); + + switch (status) { + case M_START: + case M_REPSTART: + /* Start bit was just sent out, send out addr and dir */ + data = i2c->msg->addr << 1; + if (i2c->msg->flags & I2C_M_RD) + data |= 1; + + writel(data, i2c->base + LPC24XX_I2DAT); + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR); + break; + + case MX_ADDR_W_ACK: + case MX_DATA_W_ACK: + /* + * Address or data was sent out with an ACK. If there is more + * data to send, send it now + */ + if (i2c->msg_idx < i2c->msg->len) { + writel(i2c->msg->buf[i2c->msg_idx], + i2c->base + LPC24XX_I2DAT); + } else if (i2c->is_last) { + /* Last message, send stop */ + writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET); + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); + i2c->msg_status = 0; + disable_irq_nosync(i2c->irq); + } else { + i2c->msg_status = 0; + disable_irq_nosync(i2c->irq); + } + + i2c->msg_idx++; + break; + + case MR_ADDR_R_ACK: + /* Receive first byte from slave */ + if (i2c->msg->len == 1) { + /* Last byte, return NACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR); + } else { + /* Not last byte, return ACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET); + } + + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR); + break; + + case MR_DATA_R_NACK: + /* + * The I2C shows NACK status on reads, so we need to accept + * the NACK as an ACK here. This should be ok, as the real + * BACK would of been caught on the address write. + */ + case MR_DATA_R_ACK: + /* Data was received */ + if (i2c->msg_idx < i2c->msg->len) { + i2c->msg->buf[i2c->msg_idx] = + readl(i2c->base + LPC24XX_I2DAT); + } + + /* If transfer is done, send STOP */ + if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) { + writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET); + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); + i2c->msg_status = 0; + } + + /* Message is done */ + if (i2c->msg_idx >= i2c->msg->len - 1) { + i2c->msg_status = 0; + disable_irq_nosync(i2c->irq); + } + + /* + * One pre-last data input, send NACK to tell the slave that + * this is going to be the last data byte to be transferred. + */ + if (i2c->msg_idx >= i2c->msg->len - 2) { + /* One byte left to receive - NACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR); + } else { + /* More than one byte left to receive - ACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET); + } + + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR); + i2c->msg_idx++; + break; + + case MX_ADDR_W_NACK: + case MX_DATA_W_NACK: + case MR_ADDR_R_NACK: + /* NACK processing is done */ + writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET); + i2c->msg_status = -ENXIO; + disable_irq_nosync(i2c->irq); + break; + + case M_DATA_ARB_LOST: + /* Arbitration lost */ + i2c->msg_status = -EAGAIN; + + /* Release the I2C bus */ + writel(LPC24XX_STA | LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR); + disable_irq_nosync(i2c->irq); + break; + + default: + /* Unexpected statuses */ + i2c->msg_status = -EIO; + disable_irq_nosync(i2c->irq); + break; + } + + /* Exit on failure or all bytes transferred */ + if (i2c->msg_status != -EBUSY) + wake_up(&i2c->wait); + + /* + * If `msg_status` is zero, then `lpc2k_process_msg()` + * is responsible for clearing the SI flag. + */ + if (i2c->msg_status != 0) + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); +} + +static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx) +{ + /* A new transfer is kicked off by initiating a start condition */ + if (!msgidx) { + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET); + } else { + /* + * A multi-message I2C transfer continues where the + * previous I2C transfer left off and uses the + * current condition of the I2C adapter. + */ + if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) { + WARN_ON(i2c->msg->len == 0); + + if (!(i2c->msg->flags & I2C_M_RD)) { + /* Start transmit of data */ + writel(i2c->msg->buf[0], + i2c->base + LPC24XX_I2DAT); + i2c->msg_idx++; + } + } else { + /* Start or repeated start */ + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET); + } + + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); + } + + enable_irq(i2c->irq); + + /* Wait for transfer completion */ + if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY, + msecs_to_jiffies(1000)) == 0) { + disable_irq_nosync(i2c->irq); + + return -ETIMEDOUT; + } + + return i2c->msg_status; +} + +static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int msg_num) +{ + struct lpc2k_i2c *i2c = i2c_get_adapdata(adap); + int ret, i; + u32 stat; + + /* Check for bus idle condition */ + stat = readl(i2c->base + LPC24XX_I2STAT); + if (stat != M_I2C_IDLE) { + /* Something is holding the bus, try to clear it */ + return i2c_lpc2k_clear_arb(i2c); + } + + /* Process a single message at a time */ + for (i = 0; i < msg_num; i++) { + /* Save message pointer and current message data index */ + i2c->msg = &msgs[i]; + i2c->msg_idx = 0; + i2c->msg_status = -EBUSY; + i2c->is_last = (i == (msg_num - 1)); + + ret = lpc2k_process_msg(i2c, i); + if (ret) + return ret; + } + + return msg_num; +} + +static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id) +{ + struct lpc2k_i2c *i2c = dev_id; + + if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) { + i2c_lpc2k_pump_msg(i2c); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap) +{ + /* Only emulated SMBus for now */ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm i2c_lpc2k_algorithm = { + .master_xfer = i2c_lpc2k_xfer, + .functionality = i2c_lpc2k_functionality, +}; + +static int i2c_lpc2k_probe(struct platform_device *pdev) +{ + struct lpc2k_i2c *i2c; + struct resource *res; + u32 bus_clk_rate; + u32 scl_high; + u32 clkrate; + int ret; + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + i2c->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c->base)) + return PTR_ERR(i2c->base); + + i2c->irq = platform_get_irq(pdev, 0); + if (i2c->irq < 0) { + dev_err(&pdev->dev, "can't get interrupt resource\n"); + return i2c->irq; + } + + init_waitqueue_head(&i2c->wait); + + i2c->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c->clk)) { + dev_err(&pdev->dev, "error getting clock\n"); + return PTR_ERR(i2c->clk); + } + + ret = clk_prepare_enable(i2c->clk); + if (ret) { + dev_err(&pdev->dev, "unable to enable clock.\n"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0, + dev_name(&pdev->dev), i2c); + if (ret < 0) { + dev_err(&pdev->dev, "can't request interrupt.\n"); + goto fail_clk; + } + + disable_irq_nosync(i2c->irq); + + /* Place controller is a known state */ + i2c_lpc2k_reset(i2c); + + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &bus_clk_rate); + if (ret) + bus_clk_rate = 100000; /* 100 kHz default clock rate */ + + clkrate = clk_get_rate(i2c->clk); + if (clkrate == 0) { + dev_err(&pdev->dev, "can't get I2C base clock\n"); + ret = -EINVAL; + goto fail_clk; + } + + /* Setup I2C dividers to generate clock with proper duty cycle */ + clkrate = clkrate / bus_clk_rate; + if (bus_clk_rate <= 100000) + scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100; + else if (bus_clk_rate <= 400000) + scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100; + else + scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100; + + writel(scl_high, i2c->base + LPC24XX_I2SCLH); + writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL); + + platform_set_drvdata(pdev, i2c); + + i2c_set_adapdata(&i2c->adap, i2c); + i2c->adap.owner = THIS_MODULE; + strlcpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name)); + i2c->adap.algo = &i2c_lpc2k_algorithm; + i2c->adap.dev.parent = &pdev->dev; + i2c->adap.dev.of_node = pdev->dev.of_node; + + ret = i2c_add_adapter(&i2c->adap); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add adapter!\n"); + goto fail_clk; + } + + dev_info(&pdev->dev, "LPC2K I2C adapter\n"); + + return 0; + +fail_clk: + clk_disable_unprepare(i2c->clk); + return ret; +} + +static int i2c_lpc2k_remove(struct platform_device *dev) +{ + struct lpc2k_i2c *i2c = platform_get_drvdata(dev); + + i2c_del_adapter(&i2c->adap); + clk_disable_unprepare(i2c->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int i2c_lpc2k_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct lpc2k_i2c *i2c = platform_get_drvdata(pdev); + + clk_disable(i2c->clk); + + return 0; +} + +static int i2c_lpc2k_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct lpc2k_i2c *i2c = platform_get_drvdata(pdev); + + clk_enable(i2c->clk); + i2c_lpc2k_reset(i2c); + + return 0; +} + +static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = { + .suspend_noirq = i2c_lpc2k_suspend, + .resume_noirq = i2c_lpc2k_resume, +}; + +#define I2C_LPC2K_DEV_PM_OPS (&i2c_lpc2k_dev_pm_ops) +#else +#define I2C_LPC2K_DEV_PM_OPS NULL +#endif + +static const struct of_device_id lpc2k_i2c_match[] = { + { .compatible = "nxp,lpc1788-i2c" }, + {}, +}; +MODULE_DEVICE_TABLE(of, lpc2k_i2c_match); + +static struct platform_driver i2c_lpc2k_driver = { + .probe = i2c_lpc2k_probe, + .remove = i2c_lpc2k_remove, + .driver = { + .name = "lpc2k-i2c", + .pm = I2C_LPC2K_DEV_PM_OPS, + .of_match_table = lpc2k_i2c_match, + }, +}; +module_platform_driver(i2c_lpc2k_driver); + +MODULE_AUTHOR("Kevin Wells "); +MODULE_DESCRIPTION("I2C driver for LPC2xxx devices"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lpc2k-i2c"); -- cgit v1.2.3 From 01eef96e37d77cd89156e5f51aab81a9d5c96539 Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Wed, 12 Aug 2015 17:31:33 +0300 Subject: i2c: core: Add support for best effort block read emulation There are devices that need to handle block transactions regardless of the capabilities exported by the adapter. For performance reasons, they need to use i2c read blocks if available, otherwise emulate the block transaction with word or byte transactions. Add support for a helper function that would read a data block using the best transfer available: I2C_FUNC_SMBUS_READ_I2C_BLOCK, I2C_FUNC_SMBUS_READ_WORD_DATA or I2C_FUNC_SMBUS_READ_BYTE_DATA. Signed-off-by: Irina Tirdea Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/i2c.h | 3 +++ 2 files changed, 60 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index a6780289c61d..98f6c75b1d18 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -3007,6 +3007,63 @@ trace: } EXPORT_SYMBOL(i2c_smbus_xfer); +/** + * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes + * @values: Byte array into which data will be read; big enough to hold + * the data returned by the slave. SMBus allows at most + * I2C_SMBUS_BLOCK_MAX bytes. + * + * This executes the SMBus "block read" protocol if supported by the adapter. + * If block read is not supported, it emulates it using either word or byte + * read protocols depending on availability. + * + * The addresses of the I2C slave device that are accessed with this function + * must be mapped to a linear region, so that a block read will have the same + * effect as a byte read. Before using this function you must double-check + * if the I2C slave does support exchanging a block transfer with a byte + * transfer. + */ +s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, + u8 command, u8 length, u8 *values) +{ + u8 i = 0; + int status; + + if (length > I2C_SMBUS_BLOCK_MAX) + length = I2C_SMBUS_BLOCK_MAX; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return i2c_smbus_read_i2c_block_data(client, command, length, values); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) + return -EOPNOTSUPP; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) { + while ((i + 2) <= length) { + status = i2c_smbus_read_word_data(client, command + i); + if (status < 0) + return status; + values[i] = status & 0xff; + values[i + 1] = status >> 8; + i += 2; + } + } + + while (i < length) { + status = i2c_smbus_read_byte_data(client, command + i); + if (status < 0) + return status; + values[i] = status; + i++; + } + + return i; +} +EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated); + #if IS_ENABLED(CONFIG_I2C_SLAVE) int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb) { diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 5aea07137218..768063baafbf 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -121,6 +121,9 @@ extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command, u8 length, const u8 *values); +extern s32 +i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client, + u8 command, u8 length, u8 *values); #endif /* I2C */ /** -- cgit v1.2.3 From 2cd9fbd0ed5ef12bf550c06126ebbe720574fc0e Mon Sep 17 00:00:00 2001 From: Irina Tirdea Date: Wed, 12 Aug 2015 17:31:34 +0300 Subject: eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated For i2c busses that support only SMBUS extensions, the eeprom at24 driver reads data from the device using the SMBus block, word or byte read protocols depending on availability. Replace the block read emulation from the driver with the i2c_smbus_read_i2c_block_data_or_emulated call from i2c core. Signed-off-by: Irina Tirdea Signed-off-by: Wolfram Sang --- drivers/misc/eeprom/at24.c | 37 ++++++------------------------------- 1 file changed, 6 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 2b254f3a1154..c6cb7f8f325e 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -186,19 +186,11 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, if (count > io_limit) count = io_limit; - switch (at24->use_smbus) { - case I2C_SMBUS_I2C_BLOCK_DATA: + if (at24->use_smbus) { /* Smaller eeproms can work given some SMBus extension calls */ if (count > I2C_SMBUS_BLOCK_MAX) count = I2C_SMBUS_BLOCK_MAX; - break; - case I2C_SMBUS_WORD_DATA: - count = 2; - break; - case I2C_SMBUS_BYTE_DATA: - count = 1; - break; - default: + } else { /* * When we have a better choice than SMBus calls, use a * combined I2C message. Write address; then read up to @@ -229,27 +221,10 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, timeout = jiffies + msecs_to_jiffies(write_timeout); do { read_time = jiffies; - switch (at24->use_smbus) { - case I2C_SMBUS_I2C_BLOCK_DATA: - status = i2c_smbus_read_i2c_block_data(client, offset, - count, buf); - break; - case I2C_SMBUS_WORD_DATA: - status = i2c_smbus_read_word_data(client, offset); - if (status >= 0) { - buf[0] = status & 0xff; - buf[1] = status >> 8; - status = count; - } - break; - case I2C_SMBUS_BYTE_DATA: - status = i2c_smbus_read_byte_data(client, offset); - if (status >= 0) { - buf[0] = status; - status = count; - } - break; - default: + if (at24->use_smbus) { + status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset, + count, buf); + } else { status = i2c_transfer(client->adapter, msg, 2); if (status == 2) status = count; -- cgit v1.2.3 From 480b141abf7ffe630016dd4ced0fc57f105a05a9 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 19 Aug 2015 13:19:57 +0200 Subject: i2c: Replace I2C_CROS_EC_TUNNEL dependency The ChromeOS EC tunnel I2C bus driver depend on CROS_EC_PROTO but MFD_CROS_EC select CROS_EC_PROTO instead. Mixing select and depends on is bad practice as it may lead to circular Kconfig dependencies. Since the platform device that is matched with the I2C bus driver is registered by the ChromeOS EC mfd driver, I2C_CROS_EC_TUNNEL really depends on MFD_CROS_EC. And because this config option selects CROS_EC_PROTO, that dependency is met as well. So make the driver to depend on MFD_CROS_EC instead of CROS_EC_PROTO. Signed-off-by: Javier Martinez Canillas Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 48f4b796003c..08b86178e8fb 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1140,7 +1140,7 @@ config I2C_SIBYTE config I2C_CROS_EC_TUNNEL tristate "ChromeOS EC tunnel I2C bus" - depends on CROS_EC_PROTO + depends on MFD_CROS_EC help If you say yes here you get an I2C bus that will tunnel i2c commands through to the other side of the ChromeOS EC to the i2c bus -- cgit v1.2.3 From a4a9a8cb3248b3b48a6049acaeaf23d4ad3712b9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 18 Aug 2015 12:12:19 +0300 Subject: i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code The dma_mapping_error() function returns true if there is an error, it doesn't return an error code. We should return -ENOMEM. Signed-off-by: Dan Carpenter Reviewed-by: Axel Lin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-xgene-slimpro.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index 1c9cb65ac4cf..4233f5695352 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -198,10 +198,10 @@ static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, int rc; paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE); - rc = dma_mapping_error(ctx->dev, paddr); - if (rc) { + if (dma_mapping_error(ctx->dev, paddr)) { dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", ctx->dma_buffer); + rc = -ENOMEM; goto err; } @@ -241,10 +241,10 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, memcpy(ctx->dma_buffer, data, writelen); paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, DMA_TO_DEVICE); - rc = dma_mapping_error(ctx->dev, paddr); - if (rc) { + if (dma_mapping_error(ctx->dev, paddr)) { dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", ctx->dma_buffer); + rc = -ENOMEM; goto err; } -- cgit v1.2.3 From 6602c452caf532893c1bde50aacda0bd17f958aa Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 25 Aug 2015 17:04:02 -0700 Subject: of/irq: export of_get_irq_byname() Similarly to of_get_irq(), let's export of_irq_get_byname(), so if a bus core can be compiled as a module (such as I2C) it can have access to the symbol. Reported-by: Stephen Rothwell Reported-by: kbuild test robot Signed-off-by: Dmitry Torokhov Acked-by: Rob Herring Signed-off-by: Wolfram Sang --- drivers/of/irq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 3cf7a01f557f..e9eaed1dc996 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -431,6 +431,7 @@ int of_irq_get_byname(struct device_node *dev, const char *name) return of_irq_get(dev, index); } +EXPORT_SYMBOL_GPL(of_irq_get_byname); /** * of_irq_count - Count the number of IRQs a node uses -- cgit v1.2.3 From 3fffd12839273429a185d68431f117f0a3654b07 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 17 Aug 2015 23:52:51 -0700 Subject: i2c: allow specifying separate wakeup interrupt in device tree Instead of having each i2c driver individually parse device tree data in case it or platform supports separate wakeup interrupt, and handle enabling and disabling wakeup interrupts in their power management routines, let's have i2c core do that for us. Platforms wishing to specify separate wakeup interrupt for the device should use named interrupt syntax in their DTSes: interrupt-parent = <&intc1>; interrupts = <5 0>, <6 0>; interrupt-names = "irq", "wakeup"; This patch is inspired by work done by Vignesh R for pixcir_i2c_ts driver. Note that the original code tried to preserve any existing wakeup settings from userspace but was not quite right in that regard: it would preserve wakeup flag set by userspace upon driver rebinding; but it would re-arm the wakeup flag if it was disabled by userspace. We think that resetting the flag upon re-binding the driver is proper behavior as the driver is responsible for setting up and handling wakeups. Signed-off-by: Dmitry Torokhov Tested-by: Vignesh R [wsa: updated the commit message] Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c.txt | 16 +++++++-- drivers/i2c/i2c-core.c | 51 ++++++++++++++++++++++----- 2 files changed, 56 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 1175efed4a41..8a99150ac3a7 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -12,7 +12,7 @@ Required properties - compatible - name of I2C bus controller following generic names recommended practice. -For other required properties e.g. to describe register sets, interrupts, +For other required properties e.g. to describe register sets, clocks, etc. check the binding documentation of the specific driver. The cells properties above define that an address of children of an I2C bus @@ -29,5 +29,17 @@ Optional properties These properties may not be supported by all drivers. However, if a driver wants to support one of the below features, it should adapt the bindings below. -- clock-frequency - frequency of bus clock in Hz +- clock-frequency - frequency of bus clock in Hz. - wakeup-source - device can be used as a wakeup source. + +- interrupts - interrupts used by the device. +- interrupt-names - "irq" and "wakeup" names are recognized by I2C core, + other names are left to individual drivers. + +Binding may contain optional "interrupts" property, describing interrupts +used by the device. I2C core will assign "irq" interrupt (or the very first +interrupt if not using interrupt names) as primary interrupt for the slave. + +Also, if device is marked as a wakeup source, I2C core will set up "wakeup" +interrupt for the device. If "wakeup" interrupt name is not present in the +binding, then primary interrupt will be used as wakeup interrupt. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 98f6c75b1d18..5f89f1e3c2f2 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include #include @@ -645,11 +646,13 @@ static int i2c_device_probe(struct device *dev) if (!client->irq) { int irq = -ENOENT; - if (dev->of_node) - irq = of_irq_get(dev->of_node, 0); - else if (ACPI_COMPANION(dev)) + if (dev->of_node) { + irq = of_irq_get_byname(dev->of_node, "irq"); + if (irq == -EINVAL || irq == -ENODATA) + irq = of_irq_get(dev->of_node, 0); + } else if (ACPI_COMPANION(dev)) { irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0); - + } if (irq == -EPROBE_DEFER) return irq; if (irq < 0) @@ -662,23 +665,49 @@ static int i2c_device_probe(struct device *dev) if (!driver->probe || !driver->id_table) return -ENODEV; - if (!device_can_wakeup(&client->dev)) - device_init_wakeup(&client->dev, - client->flags & I2C_CLIENT_WAKE); + if (client->flags & I2C_CLIENT_WAKE) { + int wakeirq = -ENOENT; + + if (dev->of_node) { + wakeirq = of_irq_get_byname(dev->of_node, "wakeup"); + if (wakeirq == -EPROBE_DEFER) + return wakeirq; + } + + device_init_wakeup(&client->dev, true); + + if (wakeirq > 0 && wakeirq != client->irq) + status = dev_pm_set_dedicated_wake_irq(dev, wakeirq); + else if (client->irq > 0) + status = dev_pm_set_wake_irq(dev, wakeirq); + else + status = 0; + + if (status) + dev_warn(&client->dev, "failed to set up wakeup irq"); + } + dev_dbg(dev, "probe\n"); status = of_clk_set_defaults(dev->of_node, false); if (status < 0) - return status; + goto err_clear_wakeup_irq; status = dev_pm_domain_attach(&client->dev, true); if (status != -EPROBE_DEFER) { status = driver->probe(client, i2c_match_id(driver->id_table, client)); if (status) - dev_pm_domain_detach(&client->dev, true); + goto err_detach_pm_domain; } + return 0; + +err_detach_pm_domain: + dev_pm_domain_detach(&client->dev, true); +err_clear_wakeup_irq: + dev_pm_clear_wake_irq(&client->dev); + device_init_wakeup(&client->dev, false); return status; } @@ -698,6 +727,10 @@ static int i2c_device_remove(struct device *dev) } dev_pm_domain_detach(&client->dev, true); + + dev_pm_clear_wake_irq(&client->dev); + device_init_wakeup(&client->dev, false); + return status; } -- cgit v1.2.3 From bdbf4a29ee5bbe5b6743ba47bc7b10ec2cba8b21 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 26 Aug 2015 23:59:33 +0300 Subject: i2c: muxes: fix leaked i2c adapter device node references Every call of of_parse_phandle() increments user count of found device node, if OF_DYNAMIC is enabled. The change fixes all similar addressed cases in drivers/i2c. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 1 + drivers/i2c/muxes/i2c-mux-gpio.c | 1 + drivers/i2c/muxes/i2c-mux-pinctrl.c | 1 + drivers/i2c/muxes/i2c-mux-reg.c | 1 + 4 files changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 71aac0911bf7..402e3a6c671a 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -197,6 +197,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) return -EINVAL; } arb->parent = of_get_i2c_adapter_by_node(parent_np); + of_node_put(parent_np); if (!arb->parent) { dev_err(dev, "Cannot find parent bus\n"); return -EPROBE_DEFER; diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 70db99264339..b8e11c16d98c 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -76,6 +76,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, return -ENODEV; } adapter = of_find_i2c_adapter_by_node(adapter_np); + of_node_put(adapter_np); if (!adapter) return -EPROBE_DEFER; diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index b48378c4b40d..b5a982ba8898 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -111,6 +111,7 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, return -ENODEV; } adapter = of_find_i2c_adapter_by_node(adapter_np); + of_node_put(adapter_np); if (!adapter) { dev_err(mux->dev, "Cannot find parent bus\n"); return -EPROBE_DEFER; diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 86d41d36a783..57ec57e0da52 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -106,6 +106,7 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux, return -ENODEV; } adapter = of_find_i2c_adapter_by_node(adapter_np); + of_node_put(adapter_np); if (!adapter) return -EPROBE_DEFER; -- cgit v1.2.3 From fce388afd633cdf20844e17f47b0d97c7ee06e69 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 20 Aug 2015 23:40:46 +0200 Subject: i2c: mux: reg: simplify register size checking Checking was done at three different locations, just do it once and properly at probing time. Signed-off-by: Wolfram Sang Tested-by: York Sun --- drivers/i2c/muxes/i2c-mux-reg.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 57ec57e0da52..fb5b55a0cf9d 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -59,9 +59,6 @@ static int i2c_mux_reg_set(const struct regmux *mux, unsigned int chan_id) if (!mux->data.write_only) ioread8(mux->data.reg); break; - default: - pr_err("Invalid register size\n"); - return -EINVAL; } return 0; @@ -155,10 +152,6 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux, /* map address from "reg" if exists */ if (of_address_to_resource(np, 0, &res)) { mux->data.reg_size = resource_size(&res); - if (mux->data.reg_size > 4) { - dev_err(&pdev->dev, "Invalid address size\n"); - return -EINVAL; - } mux->data.reg = devm_ioremap_resource(&pdev->dev, &res); if (IS_ERR(mux->data.reg)) return PTR_ERR(mux->data.reg); @@ -211,15 +204,17 @@ static int i2c_mux_reg_probe(struct platform_device *pdev) "Register not set, using platform resource\n"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mux->data.reg_size = resource_size(res); - if (mux->data.reg_size > 4) { - dev_err(&pdev->dev, "Invalid resource size\n"); - return -EINVAL; - } mux->data.reg = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(mux->data.reg)) return PTR_ERR(mux->data.reg); } + if (mux->data.reg_size != 4 && mux->data.reg_size != 2 && + mux->data.reg_size != 1) { + dev_err(&pdev->dev, "Invalid register size\n"); + return -EINVAL; + } + mux->adap = devm_kzalloc(&pdev->dev, sizeof(*mux->adap) * mux->data.n_values, GFP_KERNEL); -- cgit v1.2.3 From a05a34e7f6ff4a942186e99932885b10c6bc1d1a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 2 Sep 2015 11:03:41 +0300 Subject: i2c: mux: reg: fix compilation warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With CONFIG_OF=n, the following warnings occur when compiling drivers/i2c/muxes/i2c-mux-reg.c: CC drivers/i2c/muxes/i2c-mux-reg.o drivers/i2c/muxes/i2c-mux-reg.c:170:13: warning: ‘struct gpiomux’ declared inside parameter list [enabled by default] struct platform_device *pdev) ^ drivers/i2c/muxes/i2c-mux-reg.c:170:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/i2c/muxes/i2c-mux-reg.c: In function ‘i2c_mux_reg_probe’: drivers/i2c/muxes/i2c-mux-reg.c:201:3: warning: passing argument 1 of ‘i2c_mux_reg_probe_dt’ from incompatible pointer type [enabled by default] ret = i2c_mux_reg_probe_dt(mux, pdev); ^ Signed-off-by: Mike Rapoport Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-reg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index fb5b55a0cf9d..7913d8019bb3 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -160,7 +160,7 @@ static int i2c_mux_reg_probe_dt(struct regmux *mux, return 0; } #else -static int i2c_mux_reg_probe_dt(struct gpiomux *mux, +static int i2c_mux_reg_probe_dt(struct regmux *mux, struct platform_device *pdev) { return 0; -- cgit v1.2.3 From 5a73882fd2c3a86b502d54da532d373a1f2db15e Mon Sep 17 00:00:00 2001 From: York Sun Date: Wed, 2 Sep 2015 11:40:46 -0500 Subject: i2c: mux: reg Change ioread endianness for readback Reading the register (if allowed) after writing is to ensure writing is completed on a posted bus. The endianness of reading doesn't matter. Signed-off-by: York Sun Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-reg.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 7913d8019bb3..5fbd5bd0878f 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -31,28 +31,28 @@ static int i2c_mux_reg_set(const struct regmux *mux, unsigned int chan_id) if (!mux->data.reg) return -EINVAL; + /* + * Write to the register, followed by a read to ensure the write is + * completed on a "posted" bus, for example PCI or write buffers. + * The endianness of reading doesn't matter and the return data + * is not used. + */ switch (mux->data.reg_size) { case 4: - if (mux->data.little_endian) { + if (mux->data.little_endian) iowrite32(chan_id, mux->data.reg); - if (!mux->data.write_only) - ioread32(mux->data.reg); - } else { + else iowrite32be(chan_id, mux->data.reg); - if (!mux->data.write_only) - ioread32(mux->data.reg); - } + if (!mux->data.write_only) + ioread32(mux->data.reg); break; case 2: - if (mux->data.little_endian) { + if (mux->data.little_endian) iowrite16(chan_id, mux->data.reg); - if (!mux->data.write_only) - ioread16(mux->data.reg); - } else { + else iowrite16be(chan_id, mux->data.reg); - if (!mux->data.write_only) - ioread16be(mux->data.reg); - } + if (!mux->data.write_only) + ioread16(mux->data.reg); break; case 1: iowrite8(chan_id, mux->data.reg); -- cgit v1.2.3