From beca98c93dc8d838c3656bc62fd49b45622ef788 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 2 Apr 2012 18:17:17 -0400 Subject: ARM: fix lcd power build failure in collie_defconfig Commit 086ada54abaa4316e8603f02410fe8ebc9ba2de1 "FB: sa1100: remove global sa1100fb_.*_power function pointers" got rid of all instances but one in locomolcd.c -- which was conditional on CONFIG_SA1100_COLLIE. The associated .power field which replaces the global is populated in mach-sa1100/collie.c so move the assignment there, but make it conditional on the locomolcd support, so use CONFIG_BACKLIGHT_LOCOMO in that file. Cc: arm@kernel.org Acked-by: Russell King Signed-off-by: Paul Gortmaker Signed-off-by: Olof Johansson --- drivers/video/backlight/locomolcd.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index be20b5cbe26c..3a6d5419e3e3 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -229,14 +229,7 @@ static struct locomo_driver poodle_lcd_driver = { static int __init locomolcd_init(void) { - int ret = locomo_driver_register(&poodle_lcd_driver); - if (ret) - return ret; - -#ifdef CONFIG_SA1100_COLLIE - sa1100fb_lcd_power = locomolcd_power; -#endif - return 0; + return locomo_driver_register(&poodle_lcd_driver); } static void __exit locomolcd_exit(void) -- cgit v1.2.3 From 1e7caf8bcf1b49eae152ad7cf442775472dd587c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 21 Mar 2012 14:38:55 +0100 Subject: USB: ohci-at91: fix vbus_pin_active_low handling The information is not properly taken into account for {get|set}_power() functions. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Alan Stern Cc: stable [3.2+] --- drivers/usb/host/ohci-at91.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index db8963f5fbce..4d266ae5152d 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -247,7 +247,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int return; gpio_set_value(pdata->vbus_pin[port], - !pdata->vbus_pin_active_low[port] ^ enable); + pdata->vbus_pin_active_low[port] ^ enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) @@ -259,7 +259,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) return -EINVAL; return gpio_get_value(pdata->vbus_pin[port]) ^ - !pdata->vbus_pin_active_low[port]; + pdata->vbus_pin_active_low[port]; } /* -- cgit v1.2.3 From aaf9f5fc67c18259760d6302e679dcb3e36709a7 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 21 Mar 2012 16:58:11 +0100 Subject: USB: ohci-at91: rework and fix initialization The DT information are filled in a pdata structure and then passed on to the usual check code of the probe function. Thus we do not need to redo the gpio checking and irq configuration in the DT-related code. On the other hand, we setup GPIO direction in driver for vbus and overcurrent. It will be useful when moving to pinctrl subsystem. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Alan Stern --- drivers/usb/host/ohci-at91.c | 88 +++++++++++++++++++++++--------------------- 1 file changed, 46 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 4d266ae5152d..c30da6ab9f92 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -492,7 +492,7 @@ static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32); static int __devinit ohci_at91_of_init(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - int i, ret, gpio; + int i, gpio; enum of_gpio_flags flags; struct at91_usbh_data *pdata; u32 ports; @@ -520,42 +520,11 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) if (!gpio_is_valid(gpio)) continue; pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; - ret = gpio_request(gpio, "ohci_vbus"); - if (ret) { - dev_warn(&pdev->dev, "can't request vbus gpio %d", gpio); - continue; - } - ret = gpio_direction_output(gpio, !(flags & OF_GPIO_ACTIVE_LOW) ^ 1); - if (ret) - dev_warn(&pdev->dev, "can't put vbus gpio %d as output %d", - !(flags & OF_GPIO_ACTIVE_LOW) ^ 1, gpio); } - for (i = 0; i < 2; i++) { - gpio = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); - pdata->overcurrent_pin[i] = gpio; - if (!gpio_is_valid(gpio)) - continue; - ret = gpio_request(gpio, "ohci_overcurrent"); - if (ret) { - dev_err(&pdev->dev, "can't request overcurrent gpio %d", gpio); - continue; - } - - ret = gpio_direction_input(gpio); - if (ret) { - dev_err(&pdev->dev, "can't configure overcurrent gpio %d as input", gpio); - continue; - } - - ret = request_irq(gpio_to_irq(gpio), - ohci_hcd_at91_overcurrent_irq, - IRQF_SHARED, "ohci_overcurrent", pdev); - if (ret) { - gpio_free(gpio); - dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); - } - } + for (i = 0; i < 2; i++) + pdata->overcurrent_pin[i] = + of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); pdev->dev.platform_data = pdata; @@ -574,6 +543,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { struct at91_usbh_data *pdata; int i; + int gpio; + int ret; i = ohci_at91_of_init(pdev); @@ -586,23 +557,56 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (!gpio_is_valid(pdata->vbus_pin[i])) continue; - gpio_request(pdata->vbus_pin[i], "ohci_vbus"); + gpio = pdata->vbus_pin[i]; + + ret = gpio_request(gpio, "ohci_vbus"); + if (ret) { + dev_err(&pdev->dev, + "can't request vbus gpio %d\n", gpio); + continue; + } + ret = gpio_direction_output(gpio, + !pdata->vbus_pin_active_low[i]); + if (ret) { + dev_err(&pdev->dev, + "can't put vbus gpio %d as output %d\n", + gpio, !pdata->vbus_pin_active_low[i]); + gpio_free(gpio); + continue; + } + ohci_at91_usb_set_power(pdata, i, 1); } for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { - int ret; - if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; - gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent"); + gpio = pdata->overcurrent_pin[i]; + + ret = gpio_request(gpio, "ohci_overcurrent"); + if (ret) { + dev_err(&pdev->dev, + "can't request overcurrent gpio %d\n", + gpio); + continue; + } + + ret = gpio_direction_input(gpio); + if (ret) { + dev_err(&pdev->dev, + "can't configure overcurrent gpio %d as input\n", + gpio); + gpio_free(gpio); + continue; + } - ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]), + ret = request_irq(gpio_to_irq(gpio), ohci_hcd_at91_overcurrent_irq, IRQF_SHARED, "ohci_overcurrent", pdev); if (ret) { - gpio_free(pdata->overcurrent_pin[i]); - dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n"); + gpio_free(gpio); + dev_err(&pdev->dev, + "can't get gpio IRQ for overcurrent\n"); } } } -- cgit v1.2.3 From 0ee6d1eeef7bf4e08aba37bf1da377b25e8d853a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 21 Mar 2012 16:53:09 +0100 Subject: USB: ohci-at91: change maximum number of ports Change number of ports to 3 for newer SoCs. Modify pdata structure and ohci-at91 code that was dealing with ports information and check of port indexes. Several coding style errors have been addresses as the patch was touching affected lines of code and was producing errors while run through checkpatch.pl. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Alan Stern --- arch/arm/mach-at91/include/mach/board.h | 13 ++++--- drivers/usb/host/ohci-at91.c | 66 ++++++++++++++++++--------------- 2 files changed, 43 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 544a5d5ce416..49a821192c65 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -86,14 +86,15 @@ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *d extern void __init at91_add_device_eth(struct macb_platform_data *data); /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 struct at91_usbh_data { - u8 ports; /* number of ports on root hub */ - int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_active_low[2]; + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ u8 overcurrent_supported; - int overcurrent_pin[2]; - u8 overcurrent_status[2]; - u8 overcurrent_changed[2]; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index c30da6ab9f92..7cf4797a601e 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -27,6 +27,10 @@ #error "CONFIG_ARCH_AT91 must be defined." #endif +#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS) +#define at91_for_each_port(index) \ + for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++) + /* interface and function clocks; sometimes also an AHB clock */ static struct clk *iclk, *fclk, *hclk; static int clocked; @@ -240,7 +244,7 @@ ohci_at91_start (struct usb_hcd *hcd) static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable) { - if (port < 0 || port >= 2) + if (!valid_port(port)) return; if (!gpio_is_valid(pdata->vbus_pin[port])) @@ -252,7 +256,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) { - if (port < 0 || port >= 2) + if (!valid_port(port)) return -EINVAL; if (!gpio_is_valid(pdata->vbus_pin[port])) @@ -271,9 +275,9 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) int length = ohci_hub_status_data(hcd, buf); int port; - for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { + at91_for_each_port(port) { if (pdata->overcurrent_changed[port]) { - if (! length) + if (!length) length = 1; buf[0] |= 1 << (port + 1); } @@ -297,11 +301,17 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", hcd, typeReq, wValue, wIndex, buf, wLength); + wIndex--; + switch (typeReq) { case SetPortFeature: if (wValue == USB_PORT_FEAT_POWER) { dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); - ohci_at91_usb_set_power(pdata, wIndex - 1, 1); + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 1); + ret = 0; + } + goto out; } break; @@ -312,9 +322,9 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: C_OVER_CURRENT\n"); - if (wIndex == 1 || wIndex == 2) { - pdata->overcurrent_changed[wIndex-1] = 0; - pdata->overcurrent_status[wIndex-1] = 0; + if (valid_port(wIndex)) { + pdata->overcurrent_changed[wIndex] = 0; + pdata->overcurrent_status[wIndex] = 0; } goto out; @@ -323,9 +333,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: OVER_CURRENT\n"); - if (wIndex == 1 || wIndex == 2) { - pdata->overcurrent_status[wIndex-1] = 0; - } + if (valid_port(wIndex)) + pdata->overcurrent_status[wIndex] = 0; goto out; @@ -333,15 +342,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "ClearPortFeature: POWER\n"); - if (wIndex == 1 || wIndex == 2) { - ohci_at91_usb_set_power(pdata, wIndex - 1, 0); + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 0); return 0; } } break; } - ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength); if (ret) goto out; @@ -377,18 +386,15 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); - if (wIndex == 1 || wIndex == 2) { - if (! ohci_at91_usb_get_power(pdata, wIndex-1)) { + if (valid_port(wIndex)) { + if (!ohci_at91_usb_get_power(pdata, wIndex)) *data &= ~cpu_to_le32(RH_PS_PPS); - } - if (pdata->overcurrent_changed[wIndex-1]) { + if (pdata->overcurrent_changed[wIndex]) *data |= cpu_to_le32(RH_PS_OCIC); - } - if (pdata->overcurrent_status[wIndex-1]) { + if (pdata->overcurrent_status[wIndex]) *data |= cpu_to_le32(RH_PS_POCI); - } } } @@ -450,14 +456,14 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* From the GPIO notifying the over-current situation, find * out the corresponding port */ - for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) { + at91_for_each_port(port) { if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) { gpio = pdata->overcurrent_pin[port]; break; } } - if (port == ARRAY_SIZE(pdata->overcurrent_pin)) { + if (port == AT91_MAX_USBH_PORTS) { dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n"); return IRQ_HANDLED; } @@ -467,7 +473,7 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) /* When notified of an over-current situation, disable power on the corresponding port, and mark this port in over-current. */ - if (! val) { + if (!val) { ohci_at91_usb_set_power(pdata, port, 0); pdata->overcurrent_status[port] = 1; pdata->overcurrent_changed[port] = 1; @@ -514,7 +520,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) if (!of_property_read_u32(np, "num-ports", &ports)) pdata->ports = ports; - for (i = 0; i < 2; i++) { + at91_for_each_port(i) { gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags); pdata->vbus_pin[i] = gpio; if (!gpio_is_valid(gpio)) @@ -522,7 +528,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW; } - for (i = 0; i < 2; i++) + at91_for_each_port(i) pdata->overcurrent_pin[i] = of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags); @@ -554,7 +560,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (pdata) { - for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio = pdata->vbus_pin[i]; @@ -578,7 +584,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) ohci_at91_usb_set_power(pdata, i, 1); } - for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; gpio = pdata->overcurrent_pin[i]; @@ -621,14 +627,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) int i; if (pdata) { - for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->vbus_pin[i])) continue; ohci_at91_usb_set_power(pdata, i, 0); gpio_free(pdata->vbus_pin[i]); } - for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) { + at91_for_each_port(i) { if (!gpio_is_valid(pdata->overcurrent_pin[i])) continue; free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev); -- cgit v1.2.3 From 1887ab2bf236596a5ac7c0e7a90127b468c24081 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 28 Mar 2012 11:49:01 +0200 Subject: USB: ohci-at91: trivial return code name change Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Alan Stern --- drivers/usb/host/ohci-at91.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 7cf4797a601e..09f597ad6e00 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -552,10 +552,9 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) int gpio; int ret; - i = ohci_at91_of_init(pdev); - - if (i) - return i; + ret = ohci_at91_of_init(pdev); + if (ret) + return ret; pdata = pdev->dev.platform_data; -- cgit v1.2.3 From 9475375a5eb2ab9380e644d45173f67cbca0da80 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 27 Mar 2012 18:23:31 +0200 Subject: USB: ehci-atmel: add needed of.h header file Compilation error in case of non-DT configuration without this of.h header file. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Alan Stern --- drivers/usb/host/ehci-atmel.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 19f318ababa2..cf14c95a6700 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -13,6 +13,7 @@ #include #include +#include #include /* interface and function clocks */ -- cgit v1.2.3 From 2d1f6310d499f8d23e6726292c89380bd1d9693e Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 4 Apr 2012 10:09:03 -0700 Subject: EXYNOS: fix dependency for EXYNOS_CPUFREQ This fixes the CPUFREQ dependency for regarding EXYNOS SoCs such as EXYNOS4210, EXYNOS4X12 and EXYNOS5250. Its cpufreq driver should be built with selection of SoC arch part. Reported-by: Russell King Acked-by: Dave Jones Signed-off-by: Kukjin Kim --- drivers/cpufreq/Kconfig.arm | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 32d790dd8180..ffbb44685915 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -51,9 +51,6 @@ config ARM_S5PV210_CPUFREQ config ARM_EXYNOS_CPUFREQ bool "SAMSUNG EXYNOS SoCs" depends on ARCH_EXYNOS - select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210 - select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412) - select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250 default y help This adds the CPUFreq driver common part for Samsung @@ -62,20 +59,19 @@ config ARM_EXYNOS_CPUFREQ If in doubt, say N. config ARM_EXYNOS4210_CPUFREQ - bool "Samsung EXYNOS4210" - depends on ARCH_EXYNOS + def_bool CPU_EXYNOS4210 help This adds the CPUFreq driver for Samsung EXYNOS4210 SoC (S5PV310 or S5PC210). config ARM_EXYNOS4X12_CPUFREQ - bool "Samsung EXYNOS4X12" + def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412) help This adds the CPUFreq driver for Samsung EXYNOS4X12 SoC (EXYNOS4212 or EXYNOS4412). config ARM_EXYNOS5250_CPUFREQ - bool "Samsung EXYNOS5250" + def_bool SOC_EXYNOS5250 help This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. -- cgit v1.2.3 From 5c1e2c9dc684f26fcc78ff4ef15dc97ed0244303 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 17:35:08 -0600 Subject: gpio: tegra: fix register address calculations for Tegra30 Tegra20 and Tegra30 share the same register layout within registers, but the addresses of the registers is a little different. Fix the driver to cope with this. Signed-off-by: Stephen Warren Acked-by: Olof Johansson --- drivers/gpio/gpio-tegra.c | 55 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 32de6707e3c4..7d05a345776f 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include @@ -37,7 +37,8 @@ #define GPIO_PORT(x) (((x) >> 3) & 0x3) #define GPIO_BIT(x) ((x) & 0x7) -#define GPIO_REG(x) (GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4) +#define GPIO_REG(x) (GPIO_BANK(x) * tegra_gpio_bank_stride + \ + GPIO_PORT(x) * 4) #define GPIO_CNF(x) (GPIO_REG(x) + 0x00) #define GPIO_OE(x) (GPIO_REG(x) + 0x10) @@ -48,12 +49,12 @@ #define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) #define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) -#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) -#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) -#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) -#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) -#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) -#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) +#define GPIO_MSK_CNF(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x00) +#define GPIO_MSK_OE(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x10) +#define GPIO_MSK_OUT(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0X20) +#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x40) +#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x50) +#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + tegra_gpio_upper_offset + 0x60) #define GPIO_INT_LVL_MASK 0x010101 #define GPIO_INT_LVL_EDGE_RISING 0x000101 @@ -78,6 +79,8 @@ struct tegra_gpio_bank { static struct irq_domain *irq_domain; static void __iomem *regs; static u32 tegra_gpio_bank_count; +static u32 tegra_gpio_bank_stride; +static u32 tegra_gpio_upper_offset; static struct tegra_gpio_bank *tegra_gpio_banks; static inline void tegra_gpio_writel(u32 val, u32 reg) @@ -333,6 +336,26 @@ static struct irq_chip tegra_gpio_irq_chip = { #endif }; +struct tegra_gpio_soc_config { + u32 bank_stride; + u32 upper_offset; +}; + +static struct tegra_gpio_soc_config tegra20_gpio_config = { + .bank_stride = 0x80, + .upper_offset = 0x800, +}; + +static struct tegra_gpio_soc_config tegra30_gpio_config = { + .bank_stride = 0x100, + .upper_offset = 0x80, +}; + +static struct of_device_id tegra_gpio_of_match[] __devinitdata = { + { .compatible = "nvidia,tegra30-gpio", .data = &tegra30_gpio_config }, + { .compatible = "nvidia,tegra20-gpio", .data = &tegra20_gpio_config }, + { }, +}; /* This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. @@ -341,6 +364,8 @@ static struct lock_class_key gpio_lock_class; static int __devinit tegra_gpio_probe(struct platform_device *pdev) { + const struct of_device_id *match; + struct tegra_gpio_soc_config *config; int irq_base; struct resource *res; struct tegra_gpio_bank *bank; @@ -348,6 +373,15 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) int i; int j; + match = of_match_device(tegra_gpio_of_match, &pdev->dev); + if (match) + config = (struct tegra_gpio_soc_config *)match->data; + else + config = &tegra20_gpio_config; + + tegra_gpio_bank_stride = config->bank_stride; + tegra_gpio_upper_offset = config->upper_offset; + for (;;) { res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count); if (!res) @@ -441,11 +475,6 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) return 0; } -static struct of_device_id tegra_gpio_of_match[] __devinitdata = { - { .compatible = "nvidia,tegra20-gpio", }, - { }, -}; - static struct platform_driver tegra_gpio_driver = { .driver = { .name = "tegra-gpio", -- cgit v1.2.3 From 4a3398ee9d7d8008ee9bfc8a600b734a1b22af23 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 16 Mar 2012 17:37:24 -0600 Subject: gpio: tegra: Iterate over the correct number of banks When Tegra30 support was added to the Tegra GPIO driver, a few places which iterated over all banks were not converted to use the variable tegra_gpio_bank_count rather than hard-coding the bank count. Fix this. Signed-off-by: Stephen Warren Acked-by: Olof Johansson --- drivers/gpio/gpio-tegra.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c index 7d05a345776f..12f349b3830d 100644 --- a/drivers/gpio/gpio-tegra.c +++ b/drivers/gpio/gpio-tegra.c @@ -436,7 +436,7 @@ static int __devinit tegra_gpio_probe(struct platform_device *pdev) return -ENODEV; } - for (i = 0; i < 7; i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { for (j = 0; j < 4; j++) { int gpio = tegra_gpio_compose(i, j, 0); tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio)); @@ -514,7 +514,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) int i; int j; - for (i = 0; i < 7; i++) { + for (i = 0; i < tegra_gpio_bank_count; i++) { for (j = 0; j < 4; j++) { int gpio = tegra_gpio_compose(i, j, 0); seq_printf(s, -- cgit v1.2.3