From 90abdc3b973229bae98dd96649d9f7106cc177a4 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 24 Jul 2010 17:23:51 +0200 Subject: pcmcia: do not use io_req_t when calling pcmcia_request_io() Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch Acked-by: Marcel Holtmann (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski --- drivers/scsi/pcmcia/aha152x_stub.c | 14 +++++++------- drivers/scsi/pcmcia/fdomain_stub.c | 10 +++++----- drivers/scsi/pcmcia/nsp_cs.c | 30 ++++++++++++++---------------- drivers/scsi/pcmcia/qlogic_stub.c | 14 +++++++------- drivers/scsi/pcmcia/sym53c500_cs.c | 14 +++++++------- 5 files changed, 40 insertions(+), 42 deletions(-) (limited to 'drivers/scsi/pcmcia') diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 3e040f503afa..61f49bdcc0c2 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -100,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x20; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x20; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -130,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { + p_dev->io_lines = 10; /* For New Media T&J, look for a SCSI window */ if (cfg->io.win[0].len >= 0x20) - p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->resource[0]->start = cfg->io.win[0].base; else if ((cfg->io.nwin > 1) && (cfg->io.win[1].len >= 0x20)) - p_dev->io.BasePort1 = cfg->io.win[1].base; + p_dev->resource[0]->start = cfg->io.win[1].base; if ((cfg->io.nwin > 0) && - (p_dev->io.BasePort1 < 0xffff)) { - if (!pcmcia_request_io(p_dev, &p_dev->io)) + (p_dev->resource[0]->start < 0xffff)) { + if (!pcmcia_request_io(p_dev)) return 0; } return -EINVAL; diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 49a9a0a60c82..13dbe5c48492 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -83,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 0x10; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -112,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + return pcmcia_request_io(p_dev); } diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index d929891809ab..8bb598bb440d 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1558,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 0x10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; /* not used */ + link->resource[0]->end = 0x10; + link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -1641,24 +1640,23 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = + p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 4e2b83f26232..eb775f1a523c 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -156,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -185,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int qlogic_config(struct pcmcia_device * link) diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index d99c0cbad2de..321e390c9120 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -690,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io_lines = 10; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; - if (p_dev->io.BasePort1 == 0) + if (p_dev->resource[0]->start == 0) return -ENODEV; - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int @@ -858,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 10; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; -- cgit v1.2.3