From 79b5d0266aa4324c9148ad96894fcc7ad8c03c62 Mon Sep 17 00:00:00 2001 From: Maarten ter Huurne Date: Sun, 28 Feb 2016 16:53:28 +0100 Subject: regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9 The documentation lists both 1.8V and 3.3V for this regulator output, but 3.3V is mentioned more often and also matches what JZ4770 and JZ4780 expect as an input. Note that the voltage of REG9 is not programmable, so this commit only changes the voltage reported in sysfs and debugfs, not the actual output voltage of the hardware. Signed-off-by: Maarten ter Huurne Signed-off-by: Mark Brown --- drivers/regulator/act8865-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 1994795407c5..000d566e32a4 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -218,7 +218,7 @@ static const struct regulator_desc act8600_regulators[] = { .ops = &act8865_ldo_ops, .type = REGULATOR_VOLTAGE, .n_voltages = 1, - .fixed_uV = 1800000, + .fixed_uV = 3300000, .enable_reg = ACT8600_LDO910_CTRL, .enable_mask = ACT8865_ENA, .owner = THIS_MODULE, -- cgit v1.2.3