From e8245c68350104b6022b6783719e843d69ea7c43 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 21 Jul 2017 00:24:19 +0900 Subject: iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not set The ADS1015 device have two operating modes, continuous conversion mode and single-shot mode. This driver assumes that the continuous conversion mode is selected by runtime resume callback when the ADC result is requested. If CONFIG_PM is disabled, the device is always in the default single-shot mode and no one begins a single conversion. So the conversion register doesn't contain valid ADC result. Fix it by changing the continuous mode in probe function. Cc: Daniel Baluta Signed-off-by: Akinobu Mita Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-ads1015.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index 9c17a97c1107..9d77e837c09b 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -623,6 +623,13 @@ static int ads1015_probe(struct i2c_client *client, dev_err(&client->dev, "iio triggered buffer setup failed\n"); return ret; } + + ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, + ADS1015_CFG_MOD_MASK, + ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT); + if (ret) + return ret; + ret = pm_runtime_set_active(&client->dev); if (ret) goto err_buffer_cleanup; -- cgit v1.2.3