From 90dd7de4ef7ba584823dfbeba834c2919a4bb55b Mon Sep 17 00:00:00 2001 From: Matthias Schiffer Date: Thu, 30 May 2024 12:20:02 +0200 Subject: gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type The TQMx86 GPIO controller only supports falling and rising edge triggers, but not both. Fix this by implementing a software both-edge mode that toggles the edge type after every interrupt. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Co-developed-by: Gregor Herburger Signed-off-by: Gregor Herburger Signed-off-by: Matthias Schiffer Link: https://lore.kernel.org/r/515324f0491c4d44f4ef49f170354aca002d81ef.1717063994.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-tqmx86.c | 46 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 42 insertions(+), 4 deletions(-) (limited to 'drivers/gpio') diff --git a/drivers/gpio/gpio-tqmx86.c b/drivers/gpio/gpio-tqmx86.c index 7e428c872a25..f2e7e8754d95 100644 --- a/drivers/gpio/gpio-tqmx86.c +++ b/drivers/gpio/gpio-tqmx86.c @@ -32,6 +32,10 @@ #define TQMX86_GPII_NONE 0 #define TQMX86_GPII_FALLING BIT(0) #define TQMX86_GPII_RISING BIT(1) +/* Stored in irq_type as a trigger type, but not actually valid as a register + * value, so the name doesn't use "GPII" + */ +#define TQMX86_INT_BOTH (BIT(0) | BIT(1)) #define TQMX86_GPII_MASK (BIT(0) | BIT(1)) #define TQMX86_GPII_BITS 2 /* Stored in irq_type with GPII bits */ @@ -113,9 +117,15 @@ static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int offset) { u8 type = TQMX86_GPII_NONE, gpiic; - if (gpio->irq_type[offset] & TQMX86_INT_UNMASKED) + if (gpio->irq_type[offset] & TQMX86_INT_UNMASKED) { type = gpio->irq_type[offset] & TQMX86_GPII_MASK; + if (type == TQMX86_INT_BOTH) + type = tqmx86_gpio_get(&gpio->chip, offset + TQMX86_NGPO) + ? TQMX86_GPII_FALLING + : TQMX86_GPII_RISING; + } + gpiic = tqmx86_gpio_read(gpio, TQMX86_GPIIC); gpiic &= ~(TQMX86_GPII_MASK << (offset * TQMX86_GPII_BITS)); gpiic |= type << (offset * TQMX86_GPII_BITS); @@ -169,7 +179,7 @@ static int tqmx86_gpio_irq_set_type(struct irq_data *data, unsigned int type) new_type = TQMX86_GPII_FALLING; break; case IRQ_TYPE_EDGE_BOTH: - new_type = TQMX86_GPII_FALLING | TQMX86_GPII_RISING; + new_type = TQMX86_INT_BOTH; break; default: return -EINVAL; /* not supported */ @@ -189,8 +199,8 @@ static void tqmx86_gpio_irq_handler(struct irq_desc *desc) struct gpio_chip *chip = irq_desc_get_handler_data(desc); struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip); struct irq_chip *irq_chip = irq_desc_get_chip(desc); - unsigned long irq_bits; - int i = 0; + unsigned long irq_bits, flags; + int i; u8 irq_status; chained_irq_enter(irq_chip, desc); @@ -199,6 +209,34 @@ static void tqmx86_gpio_irq_handler(struct irq_desc *desc) tqmx86_gpio_write(gpio, irq_status, TQMX86_GPIIS); irq_bits = irq_status; + + raw_spin_lock_irqsave(&gpio->spinlock, flags); + for_each_set_bit(i, &irq_bits, TQMX86_NGPI) { + /* + * Edge-both triggers are implemented by flipping the edge + * trigger after each interrupt, as the controller only supports + * either rising or falling edge triggers, but not both. + * + * Internally, the TQMx86 GPIO controller has separate status + * registers for rising and falling edge interrupts. GPIIC + * configures which bits from which register are visible in the + * interrupt status register GPIIS and defines what triggers the + * parent IRQ line. Writing to GPIIS always clears both rising + * and falling interrupt flags internally, regardless of the + * currently configured trigger. + * + * In consequence, we can cleanly implement the edge-both + * trigger in software by first clearing the interrupt and then + * setting the new trigger based on the current GPIO input in + * tqmx86_gpio_irq_config() - even if an edge arrives between + * reading the input and setting the trigger, we will have a new + * interrupt pending. + */ + if ((gpio->irq_type[i] & TQMX86_GPII_MASK) == TQMX86_INT_BOTH) + tqmx86_gpio_irq_config(gpio, i); + } + raw_spin_unlock_irqrestore(&gpio->spinlock, flags); + for_each_set_bit(i, &irq_bits, TQMX86_NGPI) generic_handle_domain_irq(gpio->chip.irq.domain, i + TQMX86_NGPO); -- cgit v1.2.3