From ccb4ada2f193c7d5dc944cc925d1f58e5a007c0c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 26 Mar 2015 15:53:44 +0100 Subject: ARM: dts: sun7i: Add A20 SRAM and SRAM controller The A20 has a few SRAM that can be mapped either to a device or to the CPU, with the mapping being controlled by a SRAM controller. Since most of the time these SRAM won't be accessible by the CPU, we can't use the mmio-sram driver and compatible. Signed-off-by: Maxime Ripard [hdegoede@redhat.com: Do not change soc node name, change compatible to sun4i-a10-sram-controller to match the driver change] Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 24eae39eefa6..d4ba77202d7a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -521,12 +521,46 @@ }; }; + /* + * Note we use the address where the mmio registers start, not where + * the SRAM blocks start, this cannot be changed because that would be + * a devicetree ABI change. + */ soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + sram@00000000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00000000 0x4000>; + allwinner,sram-name = "A1"; + }; + + sram@00004000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00004000 0x4000>; + allwinner,sram-name = "A2"; + }; + + sram@00008000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00008000 0x4000>; + allwinner,sram-name = "A3-A4"; + }; + + sram@00010000 { + compatible = "allwinner,sun4i-a10-sram"; + reg = <0x00010000 0x1000>; + allwinner,sram-name = "D"; + }; + + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + }; + nmi_intc: interrupt-controller@01c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; -- cgit v1.2.3