From 2bbc89a8e9c652ee71c6c3b2e0679b7ecedb1a09 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 30 May 2012 15:49:59 +0200 Subject: m68k: Use Kbuild logic to import asm-generic headers Replace all headers files that just include their asm-generic version by Kbuild logic Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/Kbuild | 23 +++++++++++++++++++++++ arch/m68k/include/asm/bitsperlong.h | 1 - arch/m68k/include/asm/cputime.h | 6 ------ arch/m68k/include/asm/device.h | 7 ------- arch/m68k/include/asm/emergency-restart.h | 6 ------ arch/m68k/include/asm/errno.h | 6 ------ arch/m68k/include/asm/futex.h | 6 ------ arch/m68k/include/asm/ioctl.h | 1 - arch/m68k/include/asm/ipcbuf.h | 1 - arch/m68k/include/asm/irq_regs.h | 1 - arch/m68k/include/asm/kdebug.h | 1 - arch/m68k/include/asm/kmap_types.h | 6 ------ arch/m68k/include/asm/kvm_para.h | 1 - arch/m68k/include/asm/local.h | 6 ------ arch/m68k/include/asm/local64.h | 1 - arch/m68k/include/asm/mman.h | 1 - arch/m68k/include/asm/mutex.h | 9 --------- arch/m68k/include/asm/percpu.h | 6 ------ arch/m68k/include/asm/resource.h | 6 ------ arch/m68k/include/asm/scatterlist.h | 6 ------ arch/m68k/include/asm/siginfo.h | 6 ------ arch/m68k/include/asm/statfs.h | 6 ------ arch/m68k/include/asm/topology.h | 6 ------ arch/m68k/include/asm/xor.h | 1 - 24 files changed, 23 insertions(+), 97 deletions(-) delete mode 100644 arch/m68k/include/asm/bitsperlong.h delete mode 100644 arch/m68k/include/asm/cputime.h delete mode 100644 arch/m68k/include/asm/device.h delete mode 100644 arch/m68k/include/asm/emergency-restart.h delete mode 100644 arch/m68k/include/asm/errno.h delete mode 100644 arch/m68k/include/asm/futex.h delete mode 100644 arch/m68k/include/asm/ioctl.h delete mode 100644 arch/m68k/include/asm/ipcbuf.h delete mode 100644 arch/m68k/include/asm/irq_regs.h delete mode 100644 arch/m68k/include/asm/kdebug.h delete mode 100644 arch/m68k/include/asm/kmap_types.h delete mode 100644 arch/m68k/include/asm/kvm_para.h delete mode 100644 arch/m68k/include/asm/local.h delete mode 100644 arch/m68k/include/asm/local64.h delete mode 100644 arch/m68k/include/asm/mman.h delete mode 100644 arch/m68k/include/asm/mutex.h delete mode 100644 arch/m68k/include/asm/percpu.h delete mode 100644 arch/m68k/include/asm/resource.h delete mode 100644 arch/m68k/include/asm/scatterlist.h delete mode 100644 arch/m68k/include/asm/siginfo.h delete mode 100644 arch/m68k/include/asm/statfs.h delete mode 100644 arch/m68k/include/asm/topology.h delete mode 100644 arch/m68k/include/asm/xor.h (limited to 'arch') diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index eafa2539a8ee..4d1f8fa33091 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,4 +1,27 @@ include include/asm-generic/Kbuild.asm header-y += cachectl.h +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += device.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += futex.h +generic-y += ioctl.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += kvm_para.h +generic-y += local64.h +generic-y += local.h +generic-y += mman.h +generic-y += mutex.h +generic-y += percpu.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += siginfo.h +generic-y += statfs.h +generic-y += topology.h generic-y += word-at-a-time.h +generic-y += xor.h diff --git a/arch/m68k/include/asm/bitsperlong.h b/arch/m68k/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b2..000000000000 --- a/arch/m68k/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h deleted file mode 100644 index c79c5e892305..000000000000 --- a/arch/m68k/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68K_CPUTIME_H -#define __M68K_CPUTIME_H - -#include - -#endif /* __M68K_CPUTIME_H */ diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/arch/m68k/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/arch/m68k/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h deleted file mode 100644 index 0d4e188d6ef6..000000000000 --- a/arch/m68k/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_ERRNO_H -#define _M68K_ERRNO_H - -#include - -#endif /* _M68K_ERRNO_H */ diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h deleted file mode 100644 index 6a332a9f099c..000000000000 --- a/arch/m68k/include/asm/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include - -#endif diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/arch/m68k/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51cb6d0..000000000000 --- a/arch/m68k/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/arch/m68k/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/arch/m68k/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h deleted file mode 100644 index 3413cc1390ec..000000000000 --- a/arch/m68k/include/asm/kmap_types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_KMAP_TYPES_H -#define __ASM_M68K_KMAP_TYPES_H - -#include - -#endif /* __ASM_M68K_KMAP_TYPES_H */ diff --git a/arch/m68k/include/asm/kvm_para.h b/arch/m68k/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b957..000000000000 --- a/arch/m68k/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h deleted file mode 100644 index 6c259263e1f0..000000000000 --- a/arch/m68k/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_LOCAL_H -#define _ASM_M68K_LOCAL_H - -#include - -#endif /* _ASM_M68K_LOCAL_H */ diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/m68k/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h deleted file mode 100644 index 8eebf89f5ab1..000000000000 --- a/arch/m68k/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/arch/m68k/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h deleted file mode 100644 index 0859d048faf5..000000000000 --- a/arch/m68k/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_M68K_PERCPU_H -#define __ASM_M68K_PERCPU_H - -#include - -#endif /* __ASM_M68K_PERCPU_H */ diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h deleted file mode 100644 index e7d35019f337..000000000000 --- a/arch/m68k/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_RESOURCE_H -#define _M68K_RESOURCE_H - -#include - -#endif /* _M68K_RESOURCE_H */ diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h deleted file mode 100644 index 312505452a1e..000000000000 --- a/arch/m68k/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SCATTERLIST_H -#define _M68K_SCATTERLIST_H - -#include - -#endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h deleted file mode 100644 index 851d3d784b53..000000000000 --- a/arch/m68k/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_SIGINFO_H -#define _M68K_SIGINFO_H - -#include - -#endif diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h deleted file mode 100644 index 08d93f14e061..000000000000 --- a/arch/m68k/include/asm/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68K_STATFS_H -#define _M68K_STATFS_H - -#include - -#endif /* _M68K_STATFS_H */ diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h deleted file mode 100644 index ca173e9f26ff..000000000000 --- a/arch/m68k/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/arch/m68k/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v1.2.3 From 2ef0d3e64f0ba9aed72c2ddd410aea83cd3261ab Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 30 May 2012 19:50:04 +0200 Subject: m68k: Use asm-generic version of The extra definition for BITS_PER_LONG we had is also indirectly provided by , via and Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/Kbuild | 1 + arch/m68k/include/asm/types.h | 22 ---------------------- 2 files changed, 1 insertion(+), 22 deletions(-) delete mode 100644 arch/m68k/include/asm/types.h (limited to 'arch') diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 4d1f8fa33091..064f86743b34 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -23,5 +23,6 @@ generic-y += scatterlist.h generic-y += siginfo.h generic-y += statfs.h generic-y += topology.h +generic-y += types.h generic-y += word-at-a-time.h generic-y += xor.h diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h deleted file mode 100644 index 89705adcbd52..000000000000 --- a/arch/m68k/include/asm/types.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _M68K_TYPES_H -#define _M68K_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif /* _M68K_TYPES_H */ -- cgit v1.2.3 From 54503b1da74afdb38c730ad6413dbe54ce119134 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 21:39:13 +0200 Subject: m68knommu: Clean up printing of sections - Remove casts and unneeded address-of ('&') operators, - Use %p to format pointers, %lx to format unsigned longs. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/kernel/setup_no.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 7dc186b7a85f..8a624ecf86b8 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -218,13 +218,10 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n"); #endif - pr_debug("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - pr_debug("MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end); + pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", + _stext, _etext, _sdata, _edata, _sbss, _ebss); + pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", + _ebss, memory_start, memory_start, memory_end); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; -- cgit v1.2.3 From f2378ed90572aeeecded30fd3754575c2ff1e55f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 17:24:47 +0200 Subject: m68k: Remove duplicate FPU config option It's also defined in arch/m68k/Kconfig.cpu Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 147120128260..bc8cc504dee1 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -62,9 +62,6 @@ config CPU_HAS_NO_MULDIV64 config CPU_HAS_ADDRESS_SPACES bool -config FPU - bool - config HZ int default 1000 if CLEOPATRA -- cgit v1.2.3 From 022613e0b0753f1261454dea9b07c2e959363af7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 17:26:35 +0200 Subject: m68k: Move CPU_HAS_* config options They belong together with the CPU selection Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig | 9 --------- arch/m68k/Kconfig.cpu | 9 +++++++++ 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index bc8cc504dee1..87b504cfe001 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -53,15 +53,6 @@ config ZONE_DMA bool default y -config CPU_HAS_NO_BITFIELDS - bool - -config CPU_HAS_NO_MULDIV64 - bool - -config CPU_HAS_ADDRESS_SPACES - bool - config HZ int default 1000 if CLEOPATRA diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 2b53254ad994..6cd8c1a32893 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -360,6 +360,15 @@ config NODES_SHIFT default "3" depends on !SINGLE_MEMORY_CHUNK +config CPU_HAS_NO_BITFIELDS + bool + +config CPU_HAS_NO_MULDIV64 + bool + +config CPU_HAS_ADDRESS_SPACES + bool + config FPU bool -- cgit v1.2.3 From 5df58f3aac58bb0f08fa205a006c6b7840cd7ac4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 18:35:13 +0200 Subject: m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64 instead of open coding CONFIG_M68000 || CONFIG_COLDFIRE Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/delay.h | 2 +- arch/m68k/lib/muldi3.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h index 9c09becfd4c9..12d8fe4f1d30 100644 --- a/arch/m68k/include/asm/delay.h +++ b/arch/m68k/include/asm/delay.h @@ -43,7 +43,7 @@ static inline void __delay(unsigned long loops) extern void __bad_udelay(void); -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 /* * The simpler m68k and ColdFire processors do not have a 32*32->64 * multiply instruction. So we need to handle them a little differently. diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c index 79e928a525d0..ee5f0b1b5c5d 100644 --- a/arch/m68k/lib/muldi3.c +++ b/arch/m68k/lib/muldi3.c @@ -19,7 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) +#ifdef CONFIG_CPU_HAS_NO_MULDIV64 #define SI_TYPE_SIZE 32 #define __BITS4 (SI_TYPE_SIZE / 4) -- cgit v1.2.3 From 9f1f118035b2d28bb741844537b9ee87705b4c6e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 19:37:52 +0200 Subject: m68k: Introduce config option CPU_HAS_NO_UNALIGNED Use CONFIG_CPU_HAS_NO_UNALIGNED instead of open coding CONFIG_M68000 || CONFIG_COLDFIRE Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig.cpu | 5 +++++ arch/m68k/include/asm/unaligned.h | 4 ++-- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 6cd8c1a32893..c4ed65081475 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -27,6 +27,7 @@ config COLDFIRE select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 + select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM endchoice @@ -37,6 +38,7 @@ config M68000 bool select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 + select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM help The Freescale (was Motorola) 68000 CPU is the first generation of @@ -366,6 +368,9 @@ config CPU_HAS_NO_BITFIELDS config CPU_HAS_NO_MULDIV64 bool +config CPU_HAS_NO_UNALIGNED + bool + config CPU_HAS_ADDRESS_SPACES bool diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h index f4043ae63db1..2b3ca0bf7a0d 100644 --- a/arch/m68k/include/asm/unaligned.h +++ b/arch/m68k/include/asm/unaligned.h @@ -2,7 +2,7 @@ #define _ASM_M68K_UNALIGNED_H -#if defined(CONFIG_COLDFIRE) || defined(CONFIG_M68000) +#ifdef CONFIG_CPU_HAS_NO_UNALIGNED #include #include #include @@ -12,7 +12,7 @@ #else /* - * The m68k can do unaligned accesses itself. + * The m68k can do unaligned accesses itself. */ #include #include -- cgit v1.2.3 From 7df0d27f3d78282e9ab97da060e85f53a5f556b5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Jun 2012 19:39:39 +0200 Subject: m68k: CPU32 does not support unaligned accesses Hence select CPU_HAS_NO_UNALIGNED Reported-by: Philippe De Muyter Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig.cpu | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index c4ed65081475..d4f3a9839cff 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -50,6 +50,7 @@ config M68000 config MCPU32 bool select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_UNALIGNED help The Freescale (was then Motorola) CPU32 is a CPU core that is based on the 68020 processor. For the most part it is used in -- cgit v1.2.3 From dffc5837d80451e7fa3505ddc2e6c2fd4546641f Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 7 Jun 2012 10:57:07 +0200 Subject: m68k: Remove five unused headers There are five entirely unused headers in arch/m68k/include/asm. Nothing includes these headers. And a few tests found no hits for the things they provide (which makes sense). MC68332.h, mac_mouse.h, and mcfmbus.h are all unused since at least v2.6.12-rc2 (I didn't bother looking further back than that). apollodma.h is unused since v2.6.19: commit 2ed0ce5b57950a620155433c62a5a02a067f1376 ("m68k/Apollo: Remove obsolete arch/m68k/apollo/dma.c") removed the last file interested in that header. And everything interested in was removed in the v2.6.28 release cycle. The last occurrence of "sbus.h" was deleted with commit 0c0db98b50ed1217c0dbf4051722034ba314d06e ("sparc: Remove Documentation/sparc/sbus_drivers.txt"). I'm not sure whether anything relevant for m68k was included in v2.6.27, but it doesn't really matter. Signed-off-by: Paul Bolle Acked-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/MC68332.h | 152 ----------------------- arch/m68k/include/asm/apollodma.h | 248 -------------------------------------- arch/m68k/include/asm/mac_mouse.h | 23 ---- arch/m68k/include/asm/mcfmbus.h | 77 ------------ arch/m68k/include/asm/sbus.h | 45 ------- 5 files changed, 545 deletions(-) delete mode 100644 arch/m68k/include/asm/MC68332.h delete mode 100644 arch/m68k/include/asm/apollodma.h delete mode 100644 arch/m68k/include/asm/mac_mouse.h delete mode 100644 arch/m68k/include/asm/mcfmbus.h delete mode 100644 arch/m68k/include/asm/sbus.h (limited to 'arch') diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h deleted file mode 100644 index 6bb8f02685a2..000000000000 --- a/arch/m68k/include/asm/MC68332.h +++ /dev/null @@ -1,152 +0,0 @@ - -/* include/asm-m68knommu/MC68332.h: '332 control registers - * - * Copyright (C) 1998 Kenneth Albanowski , - * - */ - -#ifndef _MC68332_H_ -#define _MC68332_H_ - -#define BYTE_REF(addr) (*((volatile unsigned char*)addr)) -#define WORD_REF(addr) (*((volatile unsigned short*)addr)) - -#define PORTE_ADDR 0xfffa11 -#define PORTE BYTE_REF(PORTE_ADDR) -#define DDRE_ADDR 0xfffa15 -#define DDRE BYTE_REF(DDRE_ADDR) -#define PEPAR_ADDR 0xfffa17 -#define PEPAR BYTE_REF(PEPAR_ADDR) - -#define PORTF_ADDR 0xfffa19 -#define PORTF BYTE_REF(PORTF_ADDR) -#define DDRF_ADDR 0xfffa1d -#define DDRF BYTE_REF(DDRF_ADDR) -#define PFPAR_ADDR 0xfffa1f -#define PFPAR BYTE_REF(PFPAR_ADDR) - -#define PORTQS_ADDR 0xfffc15 -#define PORTQS BYTE_REF(PORTQS_ADDR) -#define DDRQS_ADDR 0xfffc17 -#define DDRQS BYTE_REF(DDRQS_ADDR) -#define PQSPAR_ADDR 0xfffc16 -#define PQSPAR BYTE_REF(PQSPAR_ADDR) - -#define CSPAR0_ADDR 0xFFFA44 -#define CSPAR0 WORD_REF(CSPAR0_ADDR) -#define CSPAR1_ADDR 0xFFFA46 -#define CSPAR1 WORD_REF(CSPAR1_ADDR) -#define CSARBT_ADDR 0xFFFA48 -#define CSARBT WORD_REF(CSARBT_ADDR) -#define CSOPBT_ADDR 0xFFFA4A -#define CSOPBT WORD_REF(CSOPBT_ADDR) -#define CSBAR0_ADDR 0xFFFA4C -#define CSBAR0 WORD_REF(CSBAR0_ADDR) -#define CSOR0_ADDR 0xFFFA4E -#define CSOR0 WORD_REF(CSOR0_ADDR) -#define CSBAR1_ADDR 0xFFFA50 -#define CSBAR1 WORD_REF(CSBAR1_ADDR) -#define CSOR1_ADDR 0xFFFA52 -#define CSOR1 WORD_REF(CSOR1_ADDR) -#define CSBAR2_ADDR 0xFFFA54 -#define CSBAR2 WORD_REF(CSBAR2_ADDR) -#define CSOR2_ADDR 0xFFFA56 -#define CSOR2 WORD_REF(CSOR2_ADDR) -#define CSBAR3_ADDR 0xFFFA58 -#define CSBAR3 WORD_REF(CSBAR3_ADDR) -#define CSOR3_ADDR 0xFFFA5A -#define CSOR3 WORD_REF(CSOR3_ADDR) -#define CSBAR4_ADDR 0xFFFA5C -#define CSBAR4 WORD_REF(CSBAR4_ADDR) -#define CSOR4_ADDR 0xFFFA5E -#define CSOR4 WORD_REF(CSOR4_ADDR) -#define CSBAR5_ADDR 0xFFFA60 -#define CSBAR5 WORD_REF(CSBAR5_ADDR) -#define CSOR5_ADDR 0xFFFA62 -#define CSOR5 WORD_REF(CSOR5_ADDR) -#define CSBAR6_ADDR 0xFFFA64 -#define CSBAR6 WORD_REF(CSBAR6_ADDR) -#define CSOR6_ADDR 0xFFFA66 -#define CSOR6 WORD_REF(CSOR6_ADDR) -#define CSBAR7_ADDR 0xFFFA68 -#define CSBAR7 WORD_REF(CSBAR7_ADDR) -#define CSOR7_ADDR 0xFFFA6A -#define CSOR7 WORD_REF(CSOR7_ADDR) -#define CSBAR8_ADDR 0xFFFA6C -#define CSBAR8 WORD_REF(CSBAR8_ADDR) -#define CSOR8_ADDR 0xFFFA6E -#define CSOR8 WORD_REF(CSOR8_ADDR) -#define CSBAR9_ADDR 0xFFFA70 -#define CSBAR9 WORD_REF(CSBAR9_ADDR) -#define CSOR9_ADDR 0xFFFA72 -#define CSOR9 WORD_REF(CSOR9_ADDR) -#define CSBAR10_ADDR 0xFFFA74 -#define CSBAR10 WORD_REF(CSBAR10_ADDR) -#define CSOR10_ADDR 0xFFFA76 -#define CSOR10 WORD_REF(CSOR10_ADDR) - -#define CSOR_MODE_ASYNC 0x0000 -#define CSOR_MODE_SYNC 0x8000 -#define CSOR_MODE_MASK 0x8000 -#define CSOR_BYTE_DISABLE 0x0000 -#define CSOR_BYTE_UPPER 0x4000 -#define CSOR_BYTE_LOWER 0x2000 -#define CSOR_BYTE_BOTH 0x6000 -#define CSOR_BYTE_MASK 0x6000 -#define CSOR_RW_RSVD 0x0000 -#define CSOR_RW_READ 0x0800 -#define CSOR_RW_WRITE 0x1000 -#define CSOR_RW_BOTH 0x1800 -#define CSOR_RW_MASK 0x1800 -#define CSOR_STROBE_DS 0x0400 -#define CSOR_STROBE_AS 0x0000 -#define CSOR_STROBE_MASK 0x0400 -#define CSOR_DSACK_WAIT(x) (wait << 6) -#define CSOR_DSACK_FTERM (14 << 6) -#define CSOR_DSACK_EXTERNAL (15 << 6) -#define CSOR_DSACK_MASK 0x03c0 -#define CSOR_SPACE_CPU 0x0000 -#define CSOR_SPACE_USER 0x0010 -#define CSOR_SPACE_SU 0x0020 -#define CSOR_SPACE_BOTH 0x0030 -#define CSOR_SPACE_MASK 0x0030 -#define CSOR_IPL_ALL 0x0000 -#define CSOR_IPL_PRIORITY(x) (x << 1) -#define CSOR_IPL_MASK 0x000e -#define CSOR_AVEC_ON 0x0001 -#define CSOR_AVEC_OFF 0x0000 -#define CSOR_AVEC_MASK 0x0001 - -#define CSBAR_ADDR(x) ((addr >> 11) << 3) -#define CSBAR_ADDR_MASK 0xfff8 -#define CSBAR_BLKSIZE_2K 0x0000 -#define CSBAR_BLKSIZE_8K 0x0001 -#define CSBAR_BLKSIZE_16K 0x0002 -#define CSBAR_BLKSIZE_64K 0x0003 -#define CSBAR_BLKSIZE_128K 0x0004 -#define CSBAR_BLKSIZE_256K 0x0005 -#define CSBAR_BLKSIZE_512K 0x0006 -#define CSBAR_BLKSIZE_1M 0x0007 -#define CSBAR_BLKSIZE_MASK 0x0007 - -#define CSPAR_DISC 0 -#define CSPAR_ALT 1 -#define CSPAR_CS8 2 -#define CSPAR_CS16 3 -#define CSPAR_MASK 3 - -#define CSPAR0_CSBOOT(x) (x << 0) -#define CSPAR0_CS0(x) (x << 2) -#define CSPAR0_CS1(x) (x << 4) -#define CSPAR0_CS2(x) (x << 6) -#define CSPAR0_CS3(x) (x << 8) -#define CSPAR0_CS4(x) (x << 10) -#define CSPAR0_CS5(x) (x << 12) - -#define CSPAR1_CS6(x) (x << 0) -#define CSPAR1_CS7(x) (x << 2) -#define CSPAR1_CS8(x) (x << 4) -#define CSPAR1_CS9(x) (x << 6) -#define CSPAR1_CS10(x) (x << 8) - -#endif diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h deleted file mode 100644 index 954adc851adb..000000000000 --- a/arch/m68k/include/asm/apollodma.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_APOLLO_DMA_H -#define _ASM_APOLLO_DMA_H - -#include /* need byte IO */ -#include /* And spinlocks */ -#include - - -#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val)) -#define dma_inb(addr) (*((volatile unsigned char *)(addr+IO_BASE))) - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x10C00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG (IO_DMA1_BASE+0x08) /* command register (w) */ -#define DMA1_STAT_REG (IO_DMA1_BASE+0x08) /* status register (r) */ -#define DMA1_REQ_REG (IO_DMA1_BASE+0x09) /* request register (w) */ -#define DMA1_MASK_REG (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */ -#define DMA1_MODE_REG (IO_DMA1_BASE+0x0B) /* mode register (w) */ -#define DMA1_CLEAR_FF_REG (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */ -#define DMA1_RESET_REG (IO_DMA1_BASE+0x0D) /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG (IO_DMA1_BASE+0x0E) /* Clear Mask */ -#define DMA1_MASK_ALL_REG (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */ - -#define DMA2_CMD_REG (IO_DMA2_BASE+0x10) /* command register (w) */ -#define DMA2_STAT_REG (IO_DMA2_BASE+0x10) /* status register (r) */ -#define DMA2_REQ_REG (IO_DMA2_BASE+0x12) /* request register (w) */ -#define DMA2_MASK_REG (IO_DMA2_BASE+0x14) /* single-channel mask (w) */ -#define DMA2_MODE_REG (IO_DMA2_BASE+0x16) /* mode register (w) */ -#define DMA2_CLEAR_FF_REG (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */ -#define DMA2_RESET_REG (IO_DMA2_BASE+0x1A) /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG (IO_DMA2_BASE+0x1C) /* Clear Mask */ -#define DMA2_MASK_ALL_REG (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */ - -#define DMA_ADDR_0 (IO_DMA1_BASE+0x00) /* DMA address registers */ -#define DMA_ADDR_1 (IO_DMA1_BASE+0x02) -#define DMA_ADDR_2 (IO_DMA1_BASE+0x04) -#define DMA_ADDR_3 (IO_DMA1_BASE+0x06) -#define DMA_ADDR_4 (IO_DMA2_BASE+0x00) -#define DMA_ADDR_5 (IO_DMA2_BASE+0x04) -#define DMA_ADDR_6 (IO_DMA2_BASE+0x08) -#define DMA_ADDR_7 (IO_DMA2_BASE+0x0C) - -#define DMA_CNT_0 (IO_DMA1_BASE+0x01) /* DMA count registers */ -#define DMA_CNT_1 (IO_DMA1_BASE+0x03) -#define DMA_CNT_2 (IO_DMA1_BASE+0x05) -#define DMA_CNT_3 (IO_DMA1_BASE+0x07) -#define DMA_CNT_4 (IO_DMA2_BASE+0x02) -#define DMA_CNT_5 (IO_DMA2_BASE+0x06) -#define DMA_CNT_6 (IO_DMA2_BASE+0x0A) -#define DMA_CNT_7 (IO_DMA2_BASE+0x0E) - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -#define DMA_8BIT 0 -#define DMA_16BIT 1 -#define DMA_BUSMASTER 2 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* These are in arch/m68k/apollo/dma.c: */ -extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type); -extern void dma_unmap_page(unsigned short dma_addr); - -#endif /* _ASM_APOLLO_DMA_H */ diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h deleted file mode 100644 index 39a5c292eaee..000000000000 --- a/arch/m68k/include/asm/mac_mouse.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _ASM_MAC_MOUSE_H -#define _ASM_MAC_MOUSE_H - -/* - * linux/include/asm-m68k/mac_mouse.h - * header file for Macintosh ADB mouse driver - * 27-10-97 Michael Schmitz - * copied from: - * header file for Atari Mouse driver - * by Robert de Vries (robert@and.nl) on 19Jul93 - */ - -struct mouse_status { - char buttons; - short dx; - short dy; - int ready; - int active; - wait_queue_head_t wait; - struct fasync_struct *fasyncptr; -}; - -#endif diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h deleted file mode 100644 index 319899c47a2c..000000000000 --- a/arch/m68k/include/asm/mcfmbus.h +++ /dev/null @@ -1,77 +0,0 @@ -/****************************************************************************/ - -/* - * mcfmbus.h -- Coldfire MBUS support defines. - * - * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) - */ - -/****************************************************************************/ - - -#ifndef mcfmbus_h -#define mcfmbus_h - - -#define MCFMBUS_BASE 0x280 -#define MCFMBUS_IRQ_VECTOR 0x19 -#define MCFMBUS_IRQ 0x1 -#define MCFMBUS_CLK 0x3f -#define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ -#define MCFMBUS_ADDRESS 0x01 - - -/* -* Define the 5307 MBUS register set addresses -*/ - -#define MCFMBUS_MADR 0x00 -#define MCFMBUS_MFDR 0x04 -#define MCFMBUS_MBCR 0x08 -#define MCFMBUS_MBSR 0x0C -#define MCFMBUS_MBDR 0x10 - - -#define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ - -#define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ - -/* -* Define bit flags in Control Register -*/ - -#define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ -#define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ -#define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ -#define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ -#define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ -#define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ - -/* -* Define bit flags in Status Register -*/ - -#define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ -#define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ -#define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ -#define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ -#define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ -#define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ -#define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ - -/* -* Define bit flags in DATA I/O Register -*/ - -#define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ - -#define MBUSIOCSCLOCK 1 -#define MBUSIOCGCLOCK 2 -#define MBUSIOCSADDR 3 -#define MBUSIOCGADDR 4 -#define MBUSIOCSSLADDR 5 -#define MBUSIOCGSLADDR 6 -#define MBUSIOCSSUBADDR 7 -#define MBUSIOCGSUBADDR 8 - -#endif diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h deleted file mode 100644 index bfe3ba147f2e..000000000000 --- a/arch/m68k/include/asm/sbus.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * some sbus structures and macros to make usage of sbus drivers possible - */ - -#ifndef __M68K_SBUS_H -#define __M68K_SBUS_H - -struct sbus_dev { - struct { - unsigned int which_io; - unsigned int phys_addr; - } reg_addrs[1]; -}; - -/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */ -/* No SBUS on the Sun3, kludge -- sam */ - -static inline void _sbus_writeb(unsigned char val, unsigned long addr) -{ - *(volatile unsigned char *)addr = val; -} - -static inline unsigned char _sbus_readb(unsigned long addr) -{ - return *(volatile unsigned char *)addr; -} - -static inline void _sbus_writel(unsigned long val, unsigned long addr) -{ - *(volatile unsigned long *)addr = val; - -} - -extern inline unsigned long _sbus_readl(unsigned long addr) -{ - return *(volatile unsigned long *)addr; -} - - -#define sbus_readb(a) _sbus_readb((unsigned long)a) -#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a) -#define sbus_readl(a) _sbus_readl((unsigned long)a) -#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a) - -#endif -- cgit v1.2.3 From dfe1d26d4a90287ede6b5376967375e1f8af3434 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 8 Jun 2012 15:43:00 +1000 Subject: m68knommu: Allow ColdFire CPUs to use unaligned accesses All of the current Linux supported ColdFire CPUs handle unaligned memory accesses. So remove the CONFIG_CPU_HAS_NO_UNALIGNED option selection for ColdFire. If we ever support a specific ColdFire CPU that does not support unaligned accesses then we can insert the CONFIG_CPU_HAS_NO_UNALIGNED for that specific CPU type. Signed-off-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig.cpu | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index d4f3a9839cff..06fa0c37ab6e 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -27,7 +27,6 @@ config COLDFIRE select ARCH_HAVE_CUSTOM_GPIO_H select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 - select CPU_HAS_NO_UNALIGNED select GENERIC_CSUM endchoice -- cgit v1.2.3 From 363737d66427c18edb321a06933ac999d9ce5d7f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 22:39:21 +0200 Subject: mtd/uclinux: Use generic __bss_stop instead of _ebss The standard (see BSS_SECTION() in and ) symbol for the end of BSS is __bss_stop. This allows to remove all local declarations that have been added to several architectures just to please CONFIG_MTD_UCLINUX. Signed-off-by: Geert Uytterhoeven Acked-by: Paul Mundt Acked-by: Mike Frysinger Acked-by: Michal Simek Acked-by: Greg Ungerer --- arch/blackfin/kernel/setup.c | 1 - arch/microblaze/include/asm/sections.h | 4 ---- arch/microblaze/kernel/microblaze_ksyms.c | 3 --- arch/microblaze/kernel/setup.c | 4 ++-- arch/microblaze/kernel/vmlinux.lds.S | 1 - arch/sh/include/asm/sections.h | 1 - arch/sh/kernel/setup.c | 2 +- arch/sh/kernel/sh_ksyms_32.c | 1 - arch/sh/kernel/vmlinux.lds.S | 1 - arch/sh/lib/mcount.S | 8 +++----- drivers/mtd/maps/uclinux.c | 5 ++--- 11 files changed, 8 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index ada8f0fc71e4..fb96e607adcf 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(reserved_mem_dcache_on); #ifdef CONFIG_MTD_UCLINUX extern struct map_info uclinux_ram_map; unsigned long memory_mtd_end, memory_mtd_start, mtd_size; -unsigned long _ebss; EXPORT_SYMBOL(memory_mtd_end); EXPORT_SYMBOL(memory_mtd_start); EXPORT_SYMBOL(mtd_size); diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h index 4487e150b455..c07ed5d2a820 100644 --- a/arch/microblaze/include/asm/sections.h +++ b/arch/microblaze/include/asm/sections.h @@ -18,10 +18,6 @@ extern char _ssbss[], _esbss[]; extern unsigned long __ivt_start[], __ivt_end[]; extern char _etext[], _stext[]; -# ifdef CONFIG_MTD_UCLINUX -extern char *_ebss; -# endif - extern u32 _fdt_start[], _fdt_end[]; # endif /* !__ASSEMBLY__ */ diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index bb4907c828dc..2b25bcf05c00 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -21,9 +21,6 @@ #include #include -extern char *_ebss; -EXPORT_SYMBOL_GPL(_ebss); - #ifdef CONFIG_FUNCTION_TRACER extern void _mcount(void); EXPORT_SYMBOL(_mcount); diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 16d8dfd9094b..4da971d4392f 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -121,7 +121,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, /* Move ROMFS out of BSS before clearing it */ if (romfs_size > 0) { - memmove(&_ebss, (int *)romfs_base, romfs_size); + memmove(&__bss_stop, (int *)romfs_base, romfs_size); klimit += romfs_size; } #endif @@ -165,7 +165,7 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, BUG_ON(romfs_size < 0); /* What else can we do? */ printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n", - romfs_size, romfs_base, (unsigned)&_ebss); + romfs_size, romfs_base, (unsigned)&__bss_stop); printk("New klimit: 0x%08x\n", (unsigned)klimit); #endif diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index 109e9d86ade4..936d01a689d7 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -131,7 +131,6 @@ SECTIONS { *(COMMON) . = ALIGN (4) ; __bss_stop = . ; - _ebss = . ; } . = ALIGN(PAGE_SIZE); _end = .; diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 4a5350037c8f..1b6199740e98 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -6,7 +6,6 @@ extern long __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; -extern char _ebss[]; extern char __start_eh_frame[], __stop_eh_frame[]; #endif /* __ASM_SH_SECTIONS_H */ diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 7b57bf1dc855..ebe7a7d97215 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; bss_resource.start = virt_to_phys(__bss_start); - bss_resource.end = virt_to_phys(_ebss)-1; + bss_resource.end = virt_to_phys(__bss_stop)-1; #ifdef CONFIG_CMDLINE_OVERWRITE strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 3896f26efa4a..2a0a596ebf67 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(_ebss); EXPORT_SYMBOL(empty_zero_page); #define DECLARE_EXPORT(name) \ diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index c98905f71e28..db88cbf9eafd 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -78,7 +78,6 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; BSS_SECTION(0, PAGE_SIZE, 4) - _ebss = .; /* uClinux MTD sucks */ _end = . ; STABS_DEBUG diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 84a57761f17e..60164e65d665 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -39,7 +39,7 @@ * * Make sure the stack pointer contains a valid address. Valid * addresses for kernel stacks are anywhere after the bss - * (after _ebss) and anywhere in init_thread_union (init_stack). + * (after __bss_stop) and anywhere in init_thread_union (init_stack). */ #define STACK_CHECK() \ mov #(THREAD_SIZE >> 10), r0; \ @@ -60,7 +60,7 @@ cmp/hi r2, r1; \ bf stack_panic; \ \ - /* If sp > _ebss then we're OK. */ \ + /* If sp > __bss_stop then we're OK. */ \ mov.l .L_ebss, r1; \ cmp/hi r1, r15; \ bt 1f; \ @@ -70,7 +70,7 @@ cmp/hs r1, r15; \ bf stack_panic; \ \ - /* If sp > init_stack && sp < _ebss, not OK. */ \ + /* If sp > init_stack && sp < __bss_stop, not OK. */ \ add r0, r1; \ cmp/hs r1, r15; \ bt stack_panic; \ @@ -292,8 +292,6 @@ stack_panic: nop .align 2 -.L_ebss: - .long _ebss .L_init_thread_union: .long init_thread_union .Lpanic: diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index cfff454f628b..c3bb304eca07 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -19,14 +19,13 @@ #include #include #include +#include /****************************************************************************/ -extern char _ebss; - struct map_info uclinux_ram_map = { .name = "RAM", - .phys = (unsigned long)&_ebss, + .phys = (unsigned long)__bss_stop, .size = 0, }; -- cgit v1.2.3 From dc0610518f9f01814783f14ba476b41c6ffb27cb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 21:46:03 +0200 Subject: m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/sections.h | 2 -- arch/m68k/kernel/setup_no.c | 4 ++-- arch/m68k/kernel/vmlinux-nommu.lds | 2 -- arch/m68k/kernel/vmlinux-std.lds | 2 -- arch/m68k/kernel/vmlinux-sun3.lds | 2 -- arch/m68k/mm/init_mm.c | 2 +- arch/m68k/mm/init_no.c | 2 +- arch/m68k/platform/68328/head-de2.S | 8 ++++---- arch/m68k/platform/68328/head-pilot.S | 10 +++++----- arch/m68k/platform/68328/head-ram.S | 4 ++-- arch/m68k/platform/68328/head-rom.S | 6 +++--- arch/m68k/platform/68360/head-ram.S | 6 +++--- arch/m68k/platform/68360/head-rom.S | 8 ++++---- arch/m68k/platform/coldfire/head.S | 10 +++++----- 14 files changed, 30 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h index 5277e52715ec..d64967ecfec6 100644 --- a/arch/m68k/include/asm/sections.h +++ b/arch/m68k/include/asm/sections.h @@ -3,6 +3,4 @@ #include -extern char _sbss[], _ebss[]; - #endif /* _ASM_M68K_SECTIONS_H */ diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 8a624ecf86b8..71fb29938dba 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -219,9 +219,9 @@ void __init setup_arch(char **cmdline_p) #endif pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", - _stext, _etext, _sdata, _edata, _sbss, _ebss); + _stext, _etext, _sdata, _edata, __bss_start, __bss_stop); pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ", - _ebss, memory_start, memory_start, memory_end); + __bss_stop, memory_start, memory_start, memory_end); /* Keep a copy of command line */ *cmdline_p = &command_line[0]; diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds index 40e02d9c38b4..06a763f49fd3 100644 --- a/arch/m68k/kernel/vmlinux-nommu.lds +++ b/arch/m68k/kernel/vmlinux-nommu.lds @@ -78,9 +78,7 @@ SECTIONS { __init_end = .; } - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = .; diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 63407c836826..d0993594f558 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -31,9 +31,7 @@ SECTIONS RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _edata = .; /* End of data section */ diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index ad0f46d64c0b..8080469ee6c1 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -44,9 +44,7 @@ __init_begin = .; . = ALIGN(PAGE_SIZE); __init_end = .; - _sbss = .; BSS_SECTION(0, 0, 0) - _ebss = .; _end = . ; diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c index f77f258dce3a..282f9de68966 100644 --- a/arch/m68k/mm/init_mm.c +++ b/arch/m68k/mm/init_mm.c @@ -104,7 +104,7 @@ void __init print_memmap(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_stext, _etext), MLK_ROUNDUP(_sdata, _edata), - MLK_ROUNDUP(_sbss, _ebss)); + MLK_ROUNDUP(__bss_start, __bss_stop)); } void __init mem_init(void) diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 345ec0d83e3d..688e3664aea0 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -91,7 +91,7 @@ void __init mem_init(void) totalram_pages = free_all_bootmem(); codek = (_etext - _stext) >> 10; - datak = (_ebss - _sdata) >> 10; + datak = (__bss_stop - _sdata) >> 10; initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; diff --git a/arch/m68k/platform/68328/head-de2.S b/arch/m68k/platform/68328/head-de2.S index f632fdcb93e9..537d3245b539 100644 --- a/arch/m68k/platform/68328/head-de2.S +++ b/arch/m68k/platform/68328/head-de2.S @@ -60,8 +60,8 @@ _start: * Move ROM filesystem above bss :-) */ - moveal #_sbss, %a0 /* romfs at the start of bss */ - moveal #_ebss, %a1 /* Set up destination */ + moveal #__bss_start, %a0 /* romfs at the start of bss */ + moveal #__bss_stop, %a1 /* Set up destination */ movel %a0, %a2 /* Copy of bss start */ movel 8(%a0), %d1 /* Get size of ROMFS */ @@ -84,8 +84,8 @@ _start: * Initialize BSS segment to 0 */ - lea _sbss, %a0 - lea _ebss, %a1 + lea __bss_start, %a0 + lea __bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 2: cmpal %a0, %a1 diff --git a/arch/m68k/platform/68328/head-pilot.S b/arch/m68k/platform/68328/head-pilot.S index 2ebfd6420818..45a9dad29e3d 100644 --- a/arch/m68k/platform/68328/head-pilot.S +++ b/arch/m68k/platform/68328/head-pilot.S @@ -110,7 +110,7 @@ L0: movel #CONFIG_VECTORBASE, %d7 addl #16, %d7 moveal %d7, %a0 - moveal #_ebss, %a1 + moveal #__bss_stop, %a1 lea %a1@(512), %a2 DBG_PUTC('C') @@ -138,8 +138,8 @@ LD1: DBG_PUTC('E') - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -150,7 +150,7 @@ L1: DBG_PUTC('F') /* Copy command line from end of bss to command line */ - moveal #_ebss, %a0 + moveal #__bss_stop, %a0 moveal #command_line, %a1 lea %a1@(512), %a2 @@ -165,7 +165,7 @@ L3: movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel %a4, %d0 diff --git a/arch/m68k/platform/68328/head-ram.S b/arch/m68k/platform/68328/head-ram.S index 7f1aeeacb219..5189ef926098 100644 --- a/arch/m68k/platform/68328/head-ram.S +++ b/arch/m68k/platform/68328/head-ram.S @@ -76,8 +76,8 @@ pclp3: beq pclp3 #endif /* DEBUG */ moveal #0x007ffff0, %ssp - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 >= %a1 */ L1: diff --git a/arch/m68k/platform/68328/head-rom.S b/arch/m68k/platform/68328/head-rom.S index a5ff96d0295f..3dff98ba2e97 100644 --- a/arch/m68k/platform/68328/head-rom.S +++ b/arch/m68k/platform/68328/head-rom.S @@ -59,8 +59,8 @@ _stext: movew #0x2700,%sr cmpal %a1, %a2 bhi 1b - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ 1: @@ -70,7 +70,7 @@ _stext: movew #0x2700,%sr movel #_sdata, %d0 movel %d0, _rambase - movel #_ebss, %d0 + movel #__bss_stop, %d0 movel %d0, _ramstart movel #RAMEND-CONFIG_MEMORY_RESERVE*0x100000, %d0 movel %d0, _ramend diff --git a/arch/m68k/platform/68360/head-ram.S b/arch/m68k/platform/68360/head-ram.S index 8eb94fb6b971..acd213170d80 100644 --- a/arch/m68k/platform/68360/head-ram.S +++ b/arch/m68k/platform/68360/head-ram.S @@ -219,8 +219,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -234,7 +234,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/68360/head-rom.S b/arch/m68k/platform/68360/head-rom.S index 97510e55b802..dfc756d99886 100644 --- a/arch/m68k/platform/68360/head-rom.S +++ b/arch/m68k/platform/68360/head-rom.S @@ -13,7 +13,7 @@ */ .global _stext -.global _sbss +.global __bss_start .global _start .global _rambase @@ -229,8 +229,8 @@ LD1: cmp.l #_edata, %a1 blt LD1 - moveal #_sbss, %a0 - moveal #_ebss, %a1 + moveal #__bss_start, %a0 + moveal #__bss_stop, %a1 /* Copy 0 to %a0 until %a0 == %a1 */ L1: @@ -244,7 +244,7 @@ load_quicc: store_ram_size: /* Set ram size information */ move.l #_sdata, _rambase - move.l #_ebss, _ramstart + move.l #__bss_stop, _ramstart move.l #RAMEND, %d0 sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/ move.l %d0, _ramend /* Different from RAMEND.*/ diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index c3db70ed33b3..7e16562ec1f4 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -230,8 +230,8 @@ _vstart: /* * Move ROM filesystem above bss :-) */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* set up destination */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* set up destination */ movel %a0,%a2 /* copy of bss start */ movel 8(%a0),%d0 /* get size of ROMFS */ @@ -249,7 +249,7 @@ _copy_romfs: bne _copy_romfs #else /* CONFIG_ROMFS_FS */ - lea _ebss,%a1 + lea __bss_stop,%a1 movel %a1,_ramstart #endif /* CONFIG_ROMFS_FS */ @@ -257,8 +257,8 @@ _copy_romfs: /* * Zero out the bss region. */ - lea _sbss,%a0 /* get start of bss */ - lea _ebss,%a1 /* get end of bss */ + lea __bss_start,%a0 /* get start of bss */ + lea __bss_stop,%a1 /* get end of bss */ clrl %d0 /* set value */ _clear_bss: movel %d0,(%a0)+ /* clear each word */ -- cgit v1.2.3 From e653614b28d77caa7e4405d2f259aac668f81b80 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 31 May 2012 21:49:48 +0200 Subject: m68k: Use asm-generic version of Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/Kbuild | 1 + arch/m68k/include/asm/sections.h | 6 ------ 2 files changed, 1 insertion(+), 6 deletions(-) delete mode 100644 arch/m68k/include/asm/sections.h (limited to 'arch') diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 064f86743b34..a74e5d95c384 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -20,6 +20,7 @@ generic-y += mutex.h generic-y += percpu.h generic-y += resource.h generic-y += scatterlist.h +generic-y += sections.h generic-y += siginfo.h generic-y += statfs.h generic-y += topology.h diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h deleted file mode 100644 index d64967ecfec6..000000000000 --- a/arch/m68k/include/asm/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_SECTIONS_H -#define _ASM_M68K_SECTIONS_H - -#include - -#endif /* _ASM_M68K_SECTIONS_H */ -- cgit v1.2.3 From d670b479586e457c7c36604cea08ae236fb933ac Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 20 Jun 2012 15:55:10 +0200 Subject: m68k/sun3: Remove unselectable code in prom_init() This was copied from SPARC, but isn't relevant for the supported Sun-3 models. [Geert] Also remove the related extern declarations, and update the comment about prom_init(). Reported-by: Sarah Nadi Signed-off-by: Geert Uytterhoeven --- arch/m68k/sun3/prom/init.c | 48 ++-------------------------------------------- 1 file changed, 2 insertions(+), 46 deletions(-) (limited to 'arch') diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c index d8e6349336b4..eeba067d565f 100644 --- a/arch/m68k/sun3/prom/init.c +++ b/arch/m68k/sun3/prom/init.c @@ -22,57 +22,13 @@ int prom_root_node; struct linux_nodeops *prom_nodeops; /* You must call prom_init() before you attempt to use any of the - * routines in the prom library. It returns 0 on success, 1 on - * failure. It gets passed the pointer to the PROM vector. + * routines in the prom library. + * It gets passed the pointer to the PROM vector. */ -extern void prom_meminit(void); -extern void prom_ranges_init(void); - void __init prom_init(struct linux_romvec *rp) { romvec = rp; -#ifndef CONFIG_SUN3 - switch(romvec->pv_romvers) { - case 0: - prom_vers = PROM_V0; - break; - case 2: - prom_vers = PROM_V2; - break; - case 3: - prom_vers = PROM_V3; - break; - case 4: - prom_vers = PROM_P1275; - prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n"); - prom_halt(); - break; - default: - prom_printf("PROMLIB: Bad PROM version %d\n", - romvec->pv_romvers); - prom_halt(); - break; - }; - - prom_rev = romvec->pv_plugin_revision; - prom_prev = romvec->pv_printrev; - prom_nodeops = romvec->pv_nodeops; - - prom_root_node = prom_getsibling(0); - if((prom_root_node == 0) || (prom_root_node == -1)) - prom_halt(); - - if((((unsigned long) prom_nodeops) == 0) || - (((unsigned long) prom_nodeops) == -1)) - prom_halt(); - - prom_meminit(); - - prom_ranges_init(); -#endif -// printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n", -// romvec->pv_romvers, prom_rev); /* Initialization successful. */ return; -- cgit v1.2.3 From a8ab98484a1b3e072e2b4ac720dcb0690ec4edfa Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Fri, 22 Jun 2012 12:33:41 +0200 Subject: m68k: Remove never used asm/shm.h m68k's asm/shm.h header has been part of the tree ever since m68k support got added in v1.3.94. (It started as /include/asm-m68k/shm.h and moved to its current location a few years ago.) It seems it was never used: no file ever included it and nothing used the macros it defines. (Actually, from v2.5.46 until v2.6.29-rc3 it was included by m68knommu's asm/shm.h. But that header was just a very thin wrapper for this header and was itself unused too.) This header can safely be removed. Signed-off-by: Paul Bolle Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/shm.h | 31 ------------------------------- 1 file changed, 31 deletions(-) delete mode 100644 arch/m68k/include/asm/shm.h (limited to 'arch') diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h deleted file mode 100644 index fa56ec84a126..000000000000 --- a/arch/m68k/include/asm/shm.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _M68K_SHM_H -#define _M68K_SHM_H - - -/* format of page table entries that correspond to shared memory pages - currently out in swap space (see also mm/swap.c): - bits 0-1 (PAGE_PRESENT) is = 0 - bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE - bits 31..9 are used like this: - bits 15..9 (SHM_ID) the id of the shared memory segment - bits 30..16 (SHM_IDX) the index of the page within the shared memory segment - (actually only bits 25..16 get used since SHMMAX is so low) - bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach -*/ -/* on the m68k both bits 0 and 1 must be zero */ -/* format on the sun3 is similar, but bits 30, 31 are set to zero and all - others are reduced by 2. --m */ - -#ifndef CONFIG_SUN3 -#define SHM_ID_SHIFT 9 -#else -#define SHM_ID_SHIFT 7 -#endif -#define _SHM_ID_BITS 7 -#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1) - -#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS) -#define _SHM_IDX_BITS 15 -#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1) - -#endif /* _M68K_SHM_H */ -- cgit v1.2.3 From 2a8ac745e3171889d364235b8203342e28526d2c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 6 Jul 2012 16:08:25 +0200 Subject: x86: CONFIG_CC_STACKPROTECTOR=y is no longer experimental This feature has been around for over 5 years now, and has no CONFIG_EXPERIMENTAL dependency anymore, so remove the '(EXPERIMENTAL)' tag from the help text as well. Signed-off-by: Jean Delvare Acked-by: Arjan van de Ven Link: http://lkml.kernel.org/r/1341583705.4655.18.camel@amber.site Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c70684f859e1..b03fe17042e4 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1525,7 +1525,7 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" + bool "Enable -fstack-protector buffer overflow detection" ---help--- This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on -- cgit v1.2.3 From 1525e06e4414dbe053ea10cbd8cc03bb150e8e27 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Jul 2012 21:54:29 +0200 Subject: m68k/apollo: Rename "timer" to "apollo_timer" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In file included from include/linux/kgdb.h:17, from include/linux/fb.h:8, from drivers/video/dnfb.c:15: include/linux/serial_8250.h:71: error: expected identifier or ‘(’ before numeric constant include/linux/serial_8250.h:72: error: expected ‘;’ before ‘struct’ make[1]: *** [drivers/video/dnfb.o] Error 1 This is caused by #define timer (IO_BASE + timer_physaddr) in , which conflicts with the new "timer" struct member in . Rename "timer" to "apollo_timer", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven -- http://kisskb.ellerman.id.au/kisskb/buildresult/6739606/ --- arch/m68k/apollo/config.c | 16 ++++++++-------- arch/m68k/include/asm/apollohw.h | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c index 0a30406b9442..f5565d6eeb8e 100644 --- a/arch/m68k/apollo/config.c +++ b/arch/m68k/apollo/config.c @@ -177,8 +177,8 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) timer_handler(irq, dev_id); - x=*(volatile unsigned char *)(timer+3); - x=*(volatile unsigned char *)(timer+5); + x = *(volatile unsigned char *)(apollo_timer + 3); + x = *(volatile unsigned char *)(apollo_timer + 5); return IRQ_HANDLED; } @@ -186,17 +186,17 @@ irqreturn_t dn_timer_int(int irq, void *dev_id) void dn_sched_init(irq_handler_t timer_routine) { /* program timer 1 */ - *(volatile unsigned char *)(timer+3)=0x01; - *(volatile unsigned char *)(timer+1)=0x40; - *(volatile unsigned char *)(timer+5)=0x09; - *(volatile unsigned char *)(timer+7)=0xc4; + *(volatile unsigned char *)(apollo_timer + 3) = 0x01; + *(volatile unsigned char *)(apollo_timer + 1) = 0x40; + *(volatile unsigned char *)(apollo_timer + 5) = 0x09; + *(volatile unsigned char *)(apollo_timer + 7) = 0xc4; /* enable IRQ of PIC B */ *(volatile unsigned char *)(pica+1)&=(~8); #if 0 - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); + printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); #endif if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine)) diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h index a1373b9aa281..635ef4f89010 100644 --- a/arch/m68k/include/asm/apollohw.h +++ b/arch/m68k/include/asm/apollohw.h @@ -98,7 +98,7 @@ extern u_long timer_physaddr; #define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr)) #define pica (IO_BASE + pica_physaddr) #define picb (IO_BASE + picb_physaddr) -#define timer (IO_BASE + timer_physaddr) +#define apollo_timer (IO_BASE + timer_physaddr) #define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000)) #define isaIO2mem(x) (((((x) & 0x3f8) << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE) -- cgit v1.2.3 From bba3d8c3b3c0f2123be5bc687d1cddc13437c923 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 23 Jul 2012 12:16:19 +0100 Subject: [PARISC] Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts The following build error occured during a parisc build with swap-over-NFS patches applied. net/core/sock.c:274:36: error: initializer element is not constant net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks') net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Reported-by: Fengguang Wu Signed-off-by: Mel Gorman Cc: Signed-off-by: James Bottomley --- arch/parisc/include/asm/atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 6c6defc24619..af9cf30ed474 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -141,7 +141,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) -#define ATOMIC_INIT(i) ((atomic_t) { (i) }) +#define ATOMIC_INIT(i) { (i) } #define smp_mb__before_atomic_dec() smp_mb() #define smp_mb__after_atomic_dec() smp_mb() @@ -150,7 +150,7 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #ifdef CONFIG_64BIT -#define ATOMIC64_INIT(i) ((atomic64_t) { (i) }) +#define ATOMIC64_INIT(i) { (i) } static __inline__ s64 __atomic64_add_return(s64 i, atomic64_t *v) -- cgit v1.2.3 From d6250a3f12edb3a86db9598ffeca3de8b4a219e9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 25 Jul 2012 16:28:19 +0100 Subject: x86, nops: Missing break resulting in incorrect selection on Intel The Intel case falls through into the generic case which then changes the values. For cases like the P6 it doesn't do the right thing so this seems to be a screwup. Signed-off-by: Alan Cox Link: http://lkml.kernel.org/n/tip-lww2uirad4skzjlmrm0vru8o@git.kernel.org Signed-off-by: H. Peter Anvin Cc: --- arch/x86/kernel/alternative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 1f84794f0759..73ef56c5a8b3 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -219,7 +219,7 @@ void __init arch_init_ideal_nops(void) ideal_nops = intel_nops; #endif } - + break; default: #ifdef CONFIG_X86_64 ideal_nops = k8_nops; -- cgit v1.2.3 From aea218f3cbbcaac249b6b2c98930a00d6d931f1e Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 26 Jul 2012 10:00:45 +0300 Subject: KVM: PIC: call ack notifiers for irqs that are dropped form irr After commit 242ec97c358256 PIT interrupts are no longer delivered after PIC reset. It happens because PIT injects interrupt only if previous one was acked, but since on PIC reset it is dropped from irr it will never be delivered and hence acknowledged. Fix that by calling ack notifier on PIC reset. Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/i8259.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index 1df8fb9e1d5d..e498b18f010c 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -316,6 +316,11 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) addr &= 1; if (addr == 0) { if (val & 0x10) { + u8 edge_irr = s->irr & ~s->elcr; + int i; + bool found; + struct kvm_vcpu *vcpu; + s->init4 = val & 1; s->last_irr = 0; s->irr &= s->elcr; @@ -333,6 +338,18 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) if (val & 0x08) pr_pic_unimpl( "level sensitive irq not supported"); + + kvm_for_each_vcpu(i, vcpu, s->pics_state->kvm) + if (kvm_apic_accept_pic_intr(vcpu)) { + found = true; + break; + } + + + if (found) + for (irq = 0; irq < PIC_NUM_PINS/2; irq++) + if (edge_irr & (1 << irq)) + pic_clear_isr(s, irq); } else if (val & 0x08) { if (val & 0x04) s->poll = 1; -- cgit v1.2.3 From 1d44b30f35a9873a65b320dd5300088fa995fd94 Mon Sep 17 00:00:00 2001 From: Tomoki Sekiyama Date: Thu, 26 Jul 2012 19:47:32 +0900 Subject: x86/ioapic: Fix NULL pointer dereference on CPU hotplug after disabling irqs In the current kernel, percpu variable `vector_irq' is not always cleared when a CPU is offlined. If the CPU that has the disabled irqs in vector_irq is hotplugged again, __setup_vector_irq() hits invalid irq vector and may crash. This bug can be reproduced as following; # echo 0 > /sys/devices/system/cpu/cpu7/online # modprobe -r some_driver_using_interrupts # vector_irq@cpu7 uncleared # echo 1 > /sys/devices/system/cpu/cpu7/online # kernel may crash To fix this problem, this patch clears vector_irq in __fixup_irqs() when the CPU is offlined. This also reverts commit f6175f5bfb4c, which partially fixes this bug by clearing vector in __clear_irq_vector(). But in environments with IOMMU IRQ remapper, it could fail because cfg->domain doesn't contain offlined CPUs. With this patch, the fix in __clear_irq_vector() can be reverted because every vector_irq is already cleared in __fixup_irqs() on offlined CPUs. Signed-off-by: Tomoki Sekiyama Acked-by: Suresh Siddha Cc: yrl.pp-manager.tt@hitachi.com Cc: Yinghai Lu Cc: Alexander Gordeev Link: http://lkml.kernel.org/r/20120726104732.2889.19144.stgit@kvmdev Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 4 ++-- arch/x86/kernel/irq.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 406eee784684..a6c64aaddf9a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1204,7 +1204,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) BUG_ON(!cfg->vector); vector = cfg->vector; - for_each_cpu(cpu, cfg->domain) + for_each_cpu_and(cpu, cfg->domain, cpu_online_mask) per_cpu(vector_irq, cpu)[vector] = -1; cfg->vector = 0; @@ -1212,7 +1212,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg) if (likely(!cfg->move_in_progress)) return; - for_each_cpu(cpu, cfg->old_domain) { + for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) { for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { if (per_cpu(vector_irq, cpu)[vector] != irq) diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 1f5f1d5d2a02..7ad683d78645 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -328,6 +328,7 @@ void fixup_irqs(void) chip->irq_retrigger(data); raw_spin_unlock(&desc->lock); } + __this_cpu_write(vector_irq[vector], -1); } } #endif -- cgit v1.2.3 From 736edce5f395b8309a61aa62c36c4356abc83219 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 19 Jul 2012 11:21:53 -0700 Subject: x86/mce: Move MCACOD defines from mce-severity.c to We will need some of these values in mce.c. Move them to the appropriate header file so they are available. Acked-by: Borislav Petkov Signed-off-by: Tony Luck Cc: Chen Gong Cc: Huang Ying Cc: Hidetoshi Seto Link: http://lkml.kernel.org/r/0ccfb1af5fe35e537b7cd8e4d448bf7d851dbfb9.1343078495.git.tony.luck@intel.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mce.h | 8 ++++++++ arch/x86/kernel/cpu/mcheck/mce-severity.c | 7 ------- 2 files changed, 8 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 441520e4174f..a3ac52b29cbf 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -33,6 +33,14 @@ #define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */ #define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */ #define MCI_STATUS_AR (1ULL<<55) /* Action required */ +#define MCACOD 0xffff /* MCA Error Code */ + +/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ +#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ +#define MCACOD_SCRUBMSK 0xfff0 +#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ +#define MCACOD_DATA 0x0134 /* Data Load */ +#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ /* MCi_MISC register defines */ #define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f) diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c index 413c2ced887c..13017626f9a8 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-severity.c +++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c @@ -55,13 +55,6 @@ static struct severity { #define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S) #define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR) #define MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV) -#define MCACOD 0xffff -/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */ -#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */ -#define MCACOD_SCRUBMSK 0xfff0 -#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */ -#define MCACOD_DATA 0x0134 /* Data Load */ -#define MCACOD_INSTR 0x0150 /* Instruction Fetch */ MCESEV( NO, "Invalid", -- cgit v1.2.3 From 61b0fccd7f114573f973dfe25d864608822dc09e Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Thu, 19 Jul 2012 11:28:46 -0700 Subject: x86/mce: Add quirk for instruction recovery on Sandy Bridge processors Sandy Bridge processors follow the SDM (Vol 3B, Table 15-20) and set both the RIPV and EIPV bits in the MCG_STATUS register to zero for machine checks during instruction fetch. This is more than a little counter-intuitive and means that Linux cannot recover from these errors. Rather than insert special case code at several places in mce.c and mce-severity.c, we pretend the EIPV bit was set for just this case early in processing the machine check. Acked-by: Borislav Petkov Signed-off-by: Tony Luck Cc: Chen Gong Cc: Huang Ying Cc: Hidetoshi Seto Link: http://lkml.kernel.org/r/180a06f3f357cf9f78259ae443a082b14a29535b.1343078495.git.tony.luck@intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce.c | 43 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 5a5a5dc1ff15..8cf60e29790a 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -105,6 +105,8 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = { static DEFINE_PER_CPU(struct work_struct, mce_work); +static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs); + /* * CPU/chipset specific EDAC code can register a notifier call here to print * MCE errors in a human-readable form. @@ -652,14 +654,18 @@ EXPORT_SYMBOL_GPL(machine_check_poll); * Do a quick check if any of the events requires a panic. * This decides if we keep the events around or clear them. */ -static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp) +static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp, + struct pt_regs *regs) { int i, ret = 0; for (i = 0; i < banks; i++) { m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i)); - if (m->status & MCI_STATUS_VAL) + if (m->status & MCI_STATUS_VAL) { __set_bit(i, validp); + if (quirk_no_way_out) + quirk_no_way_out(i, m, regs); + } if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY) ret = 1; } @@ -1042,7 +1048,7 @@ void do_machine_check(struct pt_regs *regs, long error_code) *final = m; memset(valid_banks, 0, sizeof(valid_banks)); - no_way_out = mce_no_way_out(&m, &msg, valid_banks); + no_way_out = mce_no_way_out(&m, &msg, valid_banks, regs); barrier(); @@ -1418,6 +1424,34 @@ static void __mcheck_cpu_init_generic(void) } } +/* + * During IFU recovery Sandy Bridge -EP4S processors set the RIPV and + * EIPV bits in MCG_STATUS to zero on the affected logical processor (SDM + * Vol 3B Table 15-20). But this confuses both the code that determines + * whether the machine check occurred in kernel or user mode, and also + * the severity assessment code. Pretend that EIPV was set, and take the + * ip/cs values from the pt_regs that mce_gather_info() ignored earlier. + */ +static void quirk_sandybridge_ifu(int bank, struct mce *m, struct pt_regs *regs) +{ + if (bank != 0) + return; + if ((m->mcgstatus & (MCG_STATUS_EIPV|MCG_STATUS_RIPV)) != 0) + return; + if ((m->status & (MCI_STATUS_OVER|MCI_STATUS_UC| + MCI_STATUS_EN|MCI_STATUS_MISCV|MCI_STATUS_ADDRV| + MCI_STATUS_PCC|MCI_STATUS_S|MCI_STATUS_AR| + MCACOD)) != + (MCI_STATUS_UC|MCI_STATUS_EN| + MCI_STATUS_MISCV|MCI_STATUS_ADDRV|MCI_STATUS_S| + MCI_STATUS_AR|MCACOD_INSTR)) + return; + + m->mcgstatus |= MCG_STATUS_EIPV; + m->ip = regs->ip; + m->cs = regs->cs; +} + /* Add per CPU specific workarounds here */ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) { @@ -1515,6 +1549,9 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c) */ if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0) mce_bootlog = 0; + + if (c->x86 == 6 && c->x86_model == 45) + quirk_no_way_out = quirk_sandybridge_ifu; } if (monarch_timeout < 0) monarch_timeout = 0; -- cgit v1.2.3 From 41fb433b63cc4745f4918fdaf295763da5ca826c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 14 Jul 2012 18:43:08 +0200 Subject: arch/x86/kernel/kdebugfs.c: Ensure a consistent return value in error case Typically, the return value desired for the failure of a function with an integer return value is a negative integer. In these cases, the return value is sometimes a negative integer and sometimes 0, due to a subsequent initialization of the return variable within the loop. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // @r exists@ identifier ret; position p; constant C; expression e1,e3,e4; statement S; @@ ret = -C ... when != ret = e3 when any if@p (...) S ... when any if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; } ... when != ret = e3 when any *if@p (...) { ... when != ret = e4 return ret; } // Signed-off-by: Julia Lawall Link: http://lkml.kernel.org/r/1342284188-19176-7-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Ingo Molnar --- arch/x86/kernel/kdebugfs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index 1d5d31ea686b..dc1404bf8e4b 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -107,7 +107,7 @@ static int __init create_setup_data_nodes(struct dentry *parent) { struct setup_data_node *node; struct setup_data *data; - int error = -ENOMEM; + int error; struct dentry *d; struct page *pg; u64 pa_data; @@ -121,8 +121,10 @@ static int __init create_setup_data_nodes(struct dentry *parent) while (pa_data) { node = kmalloc(sizeof(*node), GFP_KERNEL); - if (!node) + if (!node) { + error = -ENOMEM; goto err_dir; + } pg = pfn_to_page((pa_data+sizeof(*data)-1) >> PAGE_SHIFT); if (PageHighMem(pg)) { -- cgit v1.2.3 From 3b6961ba8c682cc71e51079017743c1b282fd259 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 26 Jul 2012 19:40:08 -0400 Subject: ACPI/x86: revert 'x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler' cd74257b974d6d26442c97891c4d05772748b177 patched up GTS/BFS -- a feature we want to remove. So revert it (by hand, due to conflict in sleep.h) to prepare for GTS/BFS removal. Signed-off-by: Len Brown Acked-by: Ingo Molnar Acked-by: Konrad Rzeszutek Wilk --- arch/x86/kernel/acpi/sleep.c | 4 ---- arch/x86/kernel/acpi/sleep.h | 2 -- arch/x86/kernel/acpi/wakeup_32.S | 4 +++- arch/x86/kernel/acpi/wakeup_64.S | 4 +++- 4 files changed, 6 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 95bf99de9058..1b8e5a03d942 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -25,10 +25,6 @@ unsigned long acpi_realmode_flags; static char temp_stack[4096]; #endif -asmlinkage void acpi_enter_s3(void) -{ - acpi_enter_sleep_state(3, wake_sleep_flags); -} /** * acpi_suspend_lowlevel - save kernel state * diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 5653a5791ec9..67f59f8c6956 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,7 +2,6 @@ * Variables and functions used by the code in sleep.c */ -#include #include extern unsigned long saved_video_mode; @@ -11,7 +10,6 @@ extern long saved_magic; extern int wakeup_pmode_return; extern u8 wake_sleep_flags; -extern asmlinkage void acpi_enter_s3(void); extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 72610839f03b..13ab720573e3 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -74,7 +74,9 @@ restore_registers: ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers - call acpi_enter_s3 + pushl $3 + call acpi_enter_sleep_state + addl $4, %esp # In case of S3 failure, we'll emerge here. Jump # to ret_point to recover diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 014d1d28c397..8ea5164cbd04 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -71,7 +71,9 @@ ENTRY(do_suspend_lowlevel) movq %rsi, saved_rsi addq $8, %rsp - call acpi_enter_s3 + movl $3, %edi + xorl %eax, %eax + call acpi_enter_sleep_state /* in case something went wrong, restore the machine status and go on */ jmp resume_point -- cgit v1.2.3 From 7740dfc0363a70546ef25c0383aca252f95a91d2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 21 Jul 2012 10:53:46 +1000 Subject: perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit i386 allmodconfig: arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_hrtimer': arch/x86/kernel/cpu/perf_event_intel_uncore.c:728: warning: integer overflow in expression arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_start_hrtimer': arch/x86/kernel/cpu/perf_event_intel_uncore.c:735: warning: integer overflow in expression Signed-off-by: Andrew Morton Cc: Zheng Yan Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-h84qlqj02zrojmxxybzmy9hi@git.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index f3851892e077..c9e5dc56630a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -5,7 +5,7 @@ #include "perf_event.h" #define UNCORE_PMU_NAME_LEN 32 -#define UNCORE_PMU_HRTIMER_INTERVAL (60 * NSEC_PER_SEC) +#define UNCORE_PMU_HRTIMER_INTERVAL (60LL * NSEC_PER_SEC) #define UNCORE_FIXED_EVENT 0xff #define UNCORE_PMC_IDX_MAX_GENERIC 8 -- cgit v1.2.3 From d07bdfd322d307789f15b427dbcc39257665356f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 10 Jul 2012 09:42:15 +0200 Subject: perf/x86: Fix USER/KERNEL tagging of samples properly Some PMUs don't provide a full register set for their sample, specifically 'advanced' PMUs like AMD IBS and Intel PEBS which provide 'better' than regular interrupt accuracy. In this case we use the interrupt regs as basis and over-write some fields (typically IP) with different information. The perf core however uses user_mode() to distinguish user/kernel samples, user_mode() relies on regs->cs. If the interrupt skid pushed us over a boundary the new IP might not be in the same domain as the interrupt. Commit ce5c1fe9a9e ("perf/x86: Fix USER/KERNEL tagging of samples") tried to fix this by making the perf core use kernel_ip(). This however is wrong (TM), as pointed out by Linus, since it doesn't allow for VM86 and non-zero based segments in IA32 mode. Therefore, provide a new helper to set the regs->ip field, set_linear_ip(), which massages the regs into a suitable state assuming the provided IP is in fact a linear address. Also modify perf_instruction_pointer() and perf_callchain_user() to deal with segments base offsets. Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1341910954.3462.102.camel@twins Signed-off-by: Ingo Molnar --- arch/x86/include/asm/perf_event.h | 11 ++-- arch/x86/kernel/cpu/perf_event.c | 89 +++++++++++++++++++++++++++---- arch/x86/kernel/cpu/perf_event.h | 20 +++++++ arch/x86/kernel/cpu/perf_event_amd_ibs.c | 4 +- arch/x86/kernel/cpu/perf_event_intel_ds.c | 7 +-- 5 files changed, 114 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index dab39350e51e..cb4e43bce98a 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -196,11 +196,16 @@ static inline u32 get_ibs_caps(void) { return 0; } extern void perf_events_lapic_init(void); /* - * Abuse bit 3 of the cpu eflags register to indicate proper PEBS IP fixups. - * This flag is otherwise unused and ABI specified to be 0, so nobody should - * care what we do with it. + * Abuse bits {3,5} of the cpu eflags register. These flags are otherwise + * unused and ABI specified to be 0, so nobody should care what we do with + * them. + * + * EXACT - the IP points to the exact instruction that triggered the + * event (HW bugs exempt). + * VM - original X86_VM_MASK; see set_linear_ip(). */ #define PERF_EFLAGS_EXACT (1UL << 3) +#define PERF_EFLAGS_VM (1UL << 5) struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 29557aa06dda..915b876edd1e 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include "perf_event.h" @@ -1738,6 +1740,29 @@ valid_user_frame(const void __user *fp, unsigned long size) return (__range_not_ok(fp, size, TASK_SIZE) == 0); } +static unsigned long get_segment_base(unsigned int segment) +{ + struct desc_struct *desc; + int idx = segment >> 3; + + if ((segment & SEGMENT_TI_MASK) == SEGMENT_LDT) { + if (idx > LDT_ENTRIES) + return 0; + + if (idx > current->active_mm->context.size) + return 0; + + desc = current->active_mm->context.ldt; + } else { + if (idx > GDT_ENTRIES) + return 0; + + desc = __this_cpu_ptr(&gdt_page.gdt[0]); + } + + return get_desc_base(desc + idx); +} + #ifdef CONFIG_COMPAT #include @@ -1746,13 +1771,17 @@ static inline int perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) { /* 32-bit process in 64-bit kernel. */ + unsigned long ss_base, cs_base; struct stack_frame_ia32 frame; const void __user *fp; if (!test_thread_flag(TIF_IA32)) return 0; - fp = compat_ptr(regs->bp); + cs_base = get_segment_base(regs->cs); + ss_base = get_segment_base(regs->ss); + + fp = compat_ptr(ss_base + regs->bp); while (entry->nr < PERF_MAX_STACK_DEPTH) { unsigned long bytes; frame.next_frame = 0; @@ -1765,8 +1794,8 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry) if (!valid_user_frame(fp, sizeof(frame))) break; - perf_callchain_store(entry, frame.return_address); - fp = compat_ptr(frame.next_frame); + perf_callchain_store(entry, cs_base + frame.return_address); + fp = compat_ptr(ss_base + frame.next_frame); } return 1; } @@ -1789,6 +1818,12 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) return; } + /* + * We don't know what to do with VM86 stacks.. ignore them for now. + */ + if (regs->flags & (X86_VM_MASK | PERF_EFLAGS_VM)) + return; + fp = (void __user *)regs->bp; perf_callchain_store(entry, regs->ip); @@ -1816,16 +1851,50 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) } } -unsigned long perf_instruction_pointer(struct pt_regs *regs) +/* + * Deal with code segment offsets for the various execution modes: + * + * VM86 - the good olde 16 bit days, where the linear address is + * 20 bits and we use regs->ip + 0x10 * regs->cs. + * + * IA32 - Where we need to look at GDT/LDT segment descriptor tables + * to figure out what the 32bit base address is. + * + * X32 - has TIF_X32 set, but is running in x86_64 + * + * X86_64 - CS,DS,SS,ES are all zero based. + */ +static unsigned long code_segment_base(struct pt_regs *regs) { - unsigned long ip; + /* + * If we are in VM86 mode, add the segment offset to convert to a + * linear address. + */ + if (regs->flags & X86_VM_MASK) + return 0x10 * regs->cs; + + /* + * For IA32 we look at the GDT/LDT segment base to convert the + * effective IP to a linear address. + */ +#ifdef CONFIG_X86_32 + if (user_mode(regs) && regs->cs != __USER_CS) + return get_segment_base(regs->cs); +#else + if (test_thread_flag(TIF_IA32)) { + if (user_mode(regs) && regs->cs != __USER32_CS) + return get_segment_base(regs->cs); + } +#endif + return 0; +} +unsigned long perf_instruction_pointer(struct pt_regs *regs) +{ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) - ip = perf_guest_cbs->get_guest_ip(); - else - ip = instruction_pointer(regs); + return perf_guest_cbs->get_guest_ip(); - return ip; + return regs->ip + code_segment_base(regs); } unsigned long perf_misc_flags(struct pt_regs *regs) @@ -1838,7 +1907,7 @@ unsigned long perf_misc_flags(struct pt_regs *regs) else misc |= PERF_RECORD_MISC_GUEST_KERNEL; } else { - if (!kernel_ip(regs->ip)) + if (user_mode(regs)) misc |= PERF_RECORD_MISC_USER; else misc |= PERF_RECORD_MISC_KERNEL; diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 821d53b696d1..6605a81ba339 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -516,6 +516,26 @@ static inline bool kernel_ip(unsigned long ip) #endif } +/* + * Not all PMUs provide the right context information to place the reported IP + * into full context. Specifically segment registers are typically not + * supplied. + * + * Assuming the address is a linear address (it is for IBS), we fake the CS and + * vm86 mode using the known zero-based code segment and 'fix up' the registers + * to reflect this. + * + * Intel PEBS/LBR appear to typically provide the effective address, nothing + * much we can do about that but pray and treat it like a linear address. + */ +static inline void set_linear_ip(struct pt_regs *regs, unsigned long ip) +{ + regs->cs = kernel_ip(ip) ? __KERNEL_CS : __USER_CS; + if (regs->flags & X86_VM_MASK) + regs->flags ^= (PERF_EFLAGS_VM | X86_VM_MASK); + regs->ip = ip; +} + #ifdef CONFIG_CPU_SUP_AMD int amd_pmu_init(void); diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index da9bcdcd9856..7bfb5bec8630 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -13,6 +13,8 @@ #include +#include "perf_event.h" + static u32 ibs_caps; #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD) @@ -536,7 +538,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) { regs.flags &= ~PERF_EFLAGS_EXACT; } else { - instruction_pointer_set(®s, ibs_data.regs[1]); + set_linear_ip(®s, ibs_data.regs[1]); regs.flags |= PERF_EFLAGS_EXACT; } diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 629ae0b7ad90..e38d97bf4259 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -499,7 +499,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) * We sampled a branch insn, rewind using the LBR stack */ if (ip == to) { - regs->ip = from; + set_linear_ip(regs, from); return 1; } @@ -529,7 +529,7 @@ static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs) } while (to < ip); if (to == ip) { - regs->ip = old_to; + set_linear_ip(regs, old_to); return 1; } @@ -569,7 +569,8 @@ static void __intel_pmu_pebs_event(struct perf_event *event, * A possible PERF_SAMPLE_REGS will have to transfer all regs. */ regs = *iregs; - regs.ip = pebs->ip; + regs.flags = pebs->flags; + set_linear_ip(®s, pebs->ip); regs.bp = pebs->bp; regs.sp = pebs->sp; -- cgit v1.2.3 From 4b6486659a7defef82ea51b276024b3aa357fefc Mon Sep 17 00:00:00 2001 From: Bruce Rogers Date: Fri, 20 Jul 2012 10:44:24 -0600 Subject: KVM: x86: apply kvmclock offset to guest wall clock time When a guest migrates to a new host, the system time difference from the previous host is used in the updates to the kvmclock system time visible to the guest, resulting in a continuation of correct kvmclock based guest timekeeping. The wall clock component of the kvmclock provided time is currently not updated with this same time offset. Since the Linux guest caches the wall clock based time, this discrepency is not noticed until the guest is rebooted. After reboot the guest's time calculations are off. This patch adjusts the wall clock by the kvmclock_offset, resulting in correct guest time after a reboot. Cc: Zachary Amsden Signed-off-by: Bruce Rogers Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 59b59508ff07..42bce48f6928 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -925,6 +925,10 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) */ getboottime(&boot); + if (kvm->arch.kvmclock_offset) { + struct timespec ts = ns_to_timespec(kvm->arch.kvmclock_offset); + boot = timespec_sub(boot, ts); + } wc.sec = boot.tv_sec; wc.nsec = boot.tv_nsec; wc.version = version; -- cgit v1.2.3 From eaf4ce6c5fed6b4c55f7efcd5fc3477435cab5e9 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 1 Aug 2012 15:59:58 -0700 Subject: x86-64, kcmp: The kcmp system call can be common We already use the same system call handler for i386 and x86-64, there is absolutely no reason x32 can't use the same system call, too. Signed-off-by: H. Peter Anvin Cc: H.J. Lu Cc: Cyrill Gorcunov Cc: v3.5 Link: http://lkml.kernel.org/n/tip-vwzk3qbcr3yjyxjg2j38vgy9@git.kernel.org --- arch/x86/syscalls/syscall_64.tbl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 51171aeff0dc..29aed7ac2c02 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -318,7 +318,7 @@ 309 common getcpu sys_getcpu 310 64 process_vm_readv sys_process_vm_readv 311 64 process_vm_writev sys_process_vm_writev -312 64 kcmp sys_kcmp +312 common kcmp sys_kcmp # # x32-specific system call numbers start at 512 to avoid cache impact -- cgit v1.2.3 From aa67f6096c19bcdb1951ef88be3cf3d2118809dc Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 1 Aug 2012 16:48:03 +0300 Subject: KVM: VMX: Fix ds/es corruption on i386 with preemption Commit b2da15ac26a0c ("KVM: VMX: Optimize %ds, %es reload") broke i386 in the following scenario: vcpu_load ... vmx_save_host_state vmx_vcpu_run (ds.rpl, es.rpl cleared by hardware) interrupt push ds, es # pushes bad ds, es schedule vmx_vcpu_put vmx_load_host_state reload ds, es (with __USER_DS) pop ds, es # of other thread's stack iret # other thread runs interrupt push ds, es schedule # back in vcpu thread pop ds, es # now with rpl=0 iret ... vcpu_put resume_userspace iret # clears ds, es due to mismatched rpl (instead of resume_userspace, we might return with SYSEXIT and then take an exception; when the exception IRETs we end up with cleared ds, es) Fix by avoiding the optimization on i386 and reloading ds, es on the lightweight exit path. Reported-by: Chris Clayron Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/vmx.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index c39b60707e02..c00f03de1b79 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1488,13 +1488,6 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx) loadsegment(ds, vmx->host_state.ds_sel); loadsegment(es, vmx->host_state.es_sel); } -#else - /* - * The sysexit path does not restore ds/es, so we must set them to - * a reasonable value ourselves. - */ - loadsegment(ds, __USER_DS); - loadsegment(es, __USER_DS); #endif reload_tss(); #ifdef CONFIG_X86_64 @@ -6370,6 +6363,19 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) #endif ); +#ifndef CONFIG_X86_64 + /* + * The sysexit path does not restore ds/es, so we must set them to + * a reasonable value ourselves. + * + * We can't defer this to vmx_load_host_state() since that function + * may be executed in interrupt context, which saves and restore segments + * around it, nullifying its effect. + */ + loadsegment(ds, __USER_DS); + loadsegment(es, __USER_DS); +#endif + vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP) | (1 << VCPU_EXREG_RFLAGS) | (1 << VCPU_EXREG_CPL) -- cgit v1.2.3 From a27032eee8cb6e16516f13c8a9752e9d5d4cc430 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 1 Aug 2012 21:10:51 +0200 Subject: sparc64: do not clobber personality flags in sys_sparc64_personality() There are multiple errors in how sys_sparc64_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: David S. Miller --- arch/sparc/kernel/sys_sparc_64.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 0dc1f5786081..11c6c9603e71 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -502,12 +502,12 @@ SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality) { int ret; - if (current->personality == PER_LINUX32 && - personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } -- cgit v1.2.3 From 2d4e6dc628b43fbbbc9219e233ec3ee0afb707e3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 11:23:16 -0300 Subject: ARM: dts: imx27-3ds.dts: Fix serial console node Fix serial console node and allow the board to boot again. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/boot/dts/imx27-3ds.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e0..0a8978a40ece 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; -- cgit v1.2.3 From 5bc6f9888db5739abfa0cae279b4b442e4db8049 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 30 Jul 2012 10:18:05 -0400 Subject: xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back. When we release pages back during bootup: Freeing 9d-100 pfn range: 99 pages freed Freeing 9cf36-9d0d2 pfn range: 412 pages freed Freeing 9f6bd-9f6bf pfn range: 2 pages freed Freeing 9f714-9f7bf pfn range: 171 pages freed Freeing 9f7e0-9f7ff pfn range: 31 pages freed Freeing 9f800-100000 pfn range: 395264 pages freed Released 395979 pages of unused memory We then try to populate those pages back. In the P2M tree however the space for those leafs must be reserved - as such we use extend_brk. We reserve 8MB of _brk space, which means we can fit over 1048576 PFNs - which is more than we should ever need. Without this, on certain compilation of the kernel we would hit: (XEN) domain_crash_sync called from entry.S (XEN) CPU: 0 (XEN) RIP: e033:[] (XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81a7c000 rbx: 000000000000003d rcx: 0000000000001000 (XEN) rdx: ffffffff81a7b000 rsi: 0000000000001000 rdi: 0000000000001000 (XEN) rbp: ffffffff81801cd8 rsp: ffffffff81801c98 r8: 0000000000100000 (XEN) r9: ffffffff81a7a000 r10: 0000000000000001 r11: 0000000000000003 (XEN) r12: 0000000000000004 r13: 0000000000000004 r14: 000000000000003d (XEN) r15: 00000000000001e8 cr0: 000000008005003b cr4: 00000000000006f0 (XEN) cr3: 0000000125803000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81801c98: .. which is extend_brk hitting a BUG_ON. Interestingly enough, most of the time we are not going to hit this b/c the _brk space is quite large (v3.5): ffffffff81a25000 B __brk_base ffffffff81e43000 B __brk_limit = ~4MB. vs earlier kernels (with this back-ported), the space is smaller: ffffffff81a25000 B __brk_base ffffffff81a7b000 B __brk_limit = 344 kBytes. where we would certainly hit this and hit extend_brk. Note that git commit c3d93f880197953f86ab90d9da4744e926b38e33 (xen: populate correct number of pages when across mem boundary (v2)) exposed this bug). [v1: Made it 8MB of _brk space instead of 4MB per Jan's suggestion] CC: stable@vger.kernel.org #only for 3.5 Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 64effdc6da94..b2e91d40a4cb 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -194,6 +194,11 @@ RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID * boundary violation will require three middle nodes. */ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); +/* When we populate back during bootup, the amount of pages can vary. The + * max we have is seen is 395979, but that does not mean it can't be more. + * But some machines can have 3GB I/O holes even. So lets reserve enough + * for 4GB of I/O and E820 holes. */ +RESERVE_BRK(p2m_populated, PMD_SIZE * 4); static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); -- cgit v1.2.3 From 9e2760d18b3cf179534bbc27692c84879c61b97c Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sat, 28 Jul 2012 00:20:34 +0200 Subject: m68k: Make sys_atomic_cmpxchg_32 work on classic m68k User space access must always go through uaccess accessors, since on classic m68k user space and kernel space are completely separate. Signed-off-by: Andreas Schwab Tested-by: Thorsten Glaser Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org --- arch/m68k/kernel/sys_m68k.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 8623f8dc16f8..9a5932ec3689 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -479,9 +479,13 @@ sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, goto bad_access; } - mem_value = *mem; + /* + * No need to check for EFAULT; we know that the page is + * present and writable. + */ + __get_user(mem_value, mem); if (mem_value == oldval) - *mem = newval; + __put_user(newval, mem); pte_unmap_unlock(pte, ptl); up_read(&mm->mmap_sem); -- cgit v1.2.3 From 095adbb6441172985f5ddc3b9e88cb3191bdeac4 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 31 Jul 2012 17:41:09 +0200 Subject: ACPI: Only count valid srat memory structures Otherwise you could run into: WARN_ON in numa_register_memblks(), because node_possible_map is zero References: https://bugzilla.novell.com/show_bug.cgi?id=757888 On this machine (ProLiant ML570 G3) the SRAT table contains: - No processor affinities - One memory affinity structure (which is set disabled) CC: Per Jessen CC: Andi Kleen Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- arch/ia64/kernel/acpi.c | 5 +++-- arch/x86/mm/srat.c | 15 ++++++++------- drivers/acpi/numa.c | 8 +++++--- include/linux/acpi.h | 2 +- 4 files changed, 17 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 6f38b6120d96..440578850ae5 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -497,7 +497,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) srat_num_cpus++; } -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { unsigned long paddr, size; @@ -512,7 +512,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) /* Ignore disabled entries */ if (!(ma->flags & ACPI_SRAT_MEM_ENABLED)) - return; + return -1; /* record this node in proximity bitmap */ pxm_bit_set(pxm); @@ -531,6 +531,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) p->size = size; p->nid = pxm; num_node_memblks++; + return 0; } void __init acpi_numa_arch_fixup(void) diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c index 4599c3e8bcb6..4ddf497ca65b 100644 --- a/arch/x86/mm/srat.c +++ b/arch/x86/mm/srat.c @@ -142,23 +142,23 @@ static inline int save_add_info(void) {return 0;} #endif /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ -void __init +int __init acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) { u64 start, end; int node, pxm; if (srat_disabled()) - return; + return -1; if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) { bad_srat(); - return; + return -1; } if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) - return; + return -1; if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info()) - return; + return -1; start = ma->base_address; end = start + ma->length; pxm = ma->proximity_domain; @@ -168,12 +168,12 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) if (node < 0) { printk(KERN_ERR "SRAT: Too many proximity domains.\n"); bad_srat(); - return; + return -1; } if (numa_add_memblk(node, start, end) < 0) { bad_srat(); - return; + return -1; } node_set(node, numa_nodes_parsed); @@ -181,6 +181,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n", node, pxm, (unsigned long long) start, (unsigned long long) end - 1); + return 0; } void __init acpi_numa_arch_fixup(void) {} diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 2a6399345c85..cb31298ca684 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -237,6 +237,8 @@ acpi_parse_processor_affinity(struct acpi_subtable_header *header, return 0; } +static int __initdata parsed_numa_memblks; + static int __init acpi_parse_memory_affinity(struct acpi_subtable_header * header, const unsigned long end) @@ -250,8 +252,8 @@ acpi_parse_memory_affinity(struct acpi_subtable_header * header, acpi_table_print_srat_entry(header); /* let architecture-dependent part to do it */ - acpi_numa_memory_affinity_init(memory_affinity); - + if (!acpi_numa_memory_affinity_init(memory_affinity)) + parsed_numa_memblks++; return 0; } @@ -306,7 +308,7 @@ int __init acpi_numa_init(void) if (cnt < 0) return cnt; - else if (cnt == 0) + else if (!parsed_numa_memblks) return -ENOENT; return 0; } diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 3ad510b25283..4f2a76224509 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -96,7 +96,7 @@ void acpi_table_print_madt_entry (struct acpi_subtable_header *madt); void acpi_numa_slit_init (struct acpi_table_slit *slit); void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa); void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa); -void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); +int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma); void acpi_numa_arch_fixup(void); #ifdef CONFIG_ACPI_HOTPLUG_CPU -- cgit v1.2.3 From 5b24c421621792fcc588af6f644d6acf2dd798cc Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 2 Aug 2012 15:33:59 +0200 Subject: [PARISC] fix personality flag check in copy_thread() Directly comparing task_struct->personality against PER_* is not fully correct, as it doesn't take flags potentially stored in top three bytes into account. Analogically, directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes. Signed-off-by: Jiri Kosina Signed-off-by: James Bottomley --- arch/parisc/kernel/process.c | 2 +- arch/parisc/kernel/sys_parisc.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index d4b94b395c16..2c05a9292a81 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -309,7 +309,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp, cregs->ksp = (unsigned long)stack + (pregs->gr[21] & (THREAD_SIZE - 1)); cregs->gr[30] = usp; - if (p->personality == PER_HPUX) { + if (personality(p->personality) == PER_HPUX) { #ifdef CONFIG_HPUX cregs->kpc = (unsigned long) &hpux_child_return; #else diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index c9b932260f47..7426e40699bd 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -225,12 +225,12 @@ long parisc_personality(unsigned long personality) long err; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; err = sys_personality(personality); - if (err == PER_LINUX32) - err = PER_LINUX; + if (personality(err) == PER_LINUX32) + err = (err & ~PER_MASK) | PER_LINUX; return err; } -- cgit v1.2.3 From 97a7dab42355d1332deef27c18b26cbeb3a2262b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 1 Aug 2012 22:11:08 -0300 Subject: ARM: imx6q-sabrelite: Setup CLKO IOMUX In order to have audio functional on mx6qsabrelite, it is necessary to setup the IOMUX for MX6Q_PAD_GPIO_0__CCM_CLKO pins as it provides the audio clock. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851ceb97..72f30f3e6171 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; -- cgit v1.2.3 From 640bf0607c110b0be4da04b9d480bf0aad9de772 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 21:29:18 -0300 Subject: ARM: mx23: Fix registers range Fix registers range. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23.dtsi | 52 ++++++++++++++++++++++---------------------- 1 file changed, 26 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae6..e6138310e5ce 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; -- cgit v1.2.3 From 0f06cde7347bff81a92395693ef977dc92756028 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 21:29:19 -0300 Subject: ARM: mx28: Fix registers range Fix registers range. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 74 ++++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac68da8..3fa6d190fab4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; -- cgit v1.2.3 From c9f11c30374329a0d2a88cf05281ca49d8eca9ab Mon Sep 17 00:00:00 2001 From: Jia Hongtao Date: Fri, 3 Aug 2012 18:14:09 +0800 Subject: powerpc/fsl-pci: Only scan PCI bus if configured as a host We change fsl_add_bridge to return -ENODEV if the controller is working in agent mode. Then check the return value of fsl_add_bridge to guarantee that only successfully added host bus will be scanned. Signed-off-by: Jia Hongtao Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_pci.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a7b2a600d0a4..c37f46136321 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) iounmap(hose->cfg_data); iounmap(hose->cfg_addr); pcibios_free_controller(hose); - return 0; + return -ENODEV; } setup_pci_cmd(hose); @@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary; void __devinit fsl_pci_init(void) { + int ret; struct device_node *node; struct pci_controller *hose; dma_addr_t max = 0xffffffff; @@ -855,10 +856,12 @@ void __devinit fsl_pci_init(void) if (!fsl_pci_primary) fsl_pci_primary = node; - fsl_add_bridge(node, fsl_pci_primary == node); - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + ret = fsl_add_bridge(node, fsl_pci_primary == node); + if (ret == 0) { + hose = pci_find_hose_for_OF_device(node); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } } -- cgit v1.2.3 From 8cc7a2b9f75355f60922db4adf27742ba7f2f6bc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 26 Jul 2012 16:08:53 -0300 Subject: ARM: clk-imx31: Fix the keypad clock name Fix the keypad clock name, in order to fix the following error: imx-keypad imx-keypad: failed to get keypad clock imx-keypad: probe of imx-keypad failed with error -2 Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/clk-imx31.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70f90f9..1253af2d9971 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); -- cgit v1.2.3 From 68b0562df90a76ba964423986b2472c7e791729a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 2 Aug 2012 22:28:49 +0800 Subject: ARM: imx: enable emi_slow_gate clock for imx5 The imx5 common clock migration causes a regression with smsc911x driver on imx53-ard board, where a smsc lan9220 controller gets connected on imx53 with EIM interface. EIM needs clock emi_slow_gate to be functional. In the new imx5 clock driver, there is no use count incremented for the clock by enabling it, so the framework closes the clock at late init time and makes EIM stop working then. Enable emi_slow_gate in clock driver initialization to fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Sascha Hauer --- arch/arm/mach-imx/clk-imx51-imx53.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f6086693ebd2..4bdcaa97bd98 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ -- cgit v1.2.3 From 1eec0c569523782392b5e6245effddb626213b8c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 2 Aug 2012 22:48:39 +0800 Subject: ARM: dts: imx53-ard: add regulators for lan9220 Since commit c7e963f (net/smsc911x: Add regulator support), the lan9220 device tree probe fails on imx53-ard board, because the commit makes VDD33A and VDDVARIO supplies mandatory for the driver. Add a fixed dummy 3V3 supplying lan9220 to fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-ard.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafcdbeec..fa95f4aa8ce6 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -66,10 +66,30 @@ interrupt-parent = <&gpio2>; interrupts = <31>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; -- cgit v1.2.3 From 65dee07c9927d4af17b1832e4b7a1bb704607f91 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 2 Aug 2012 22:08:26 +0800 Subject: ARM: dts: imx: fix gpio interrupts property Commit 88cde8b (ARM: dts: imx: update #interrupt-cells for gpio nodes) changes gpio #interrupt-cells from 1 to 2 without updating the users. It causes the gpio irq requesting call failing in client driver's probe function. Add the irq type cell for those gpio interrupt users to fix their driver probe failure. Reported-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 2 +- arch/arm/boot/dts/imx53-ard.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5976e6..cd86177a3ea2 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index fa95f4aa8ce6..da895e93a999 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,7 +64,7 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; /* * VDD33A and VDDVARIO of LAN9220 are supplied by -- cgit v1.2.3 From 3bed491c8d28329e34f8a31e3fe64d03f3a350f1 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 3 Aug 2012 20:54:48 +0200 Subject: ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig, this caused severe breakage of userland applications since the upper limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr if needed. Quoting Russell King [1]: "4096 is also fine for ARM too. There's not much point in having defconfigs change it - that would just be pure noise in the config files." the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig altogether. This problem was introduced by commit cde7c41 (ARM: configs: add defconfig for mach-mxs). [1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2 Signed-off-by: Marek Vasut Cc: stable@vger.kernel.org Cc: Russell King Cc: Wolfgang Denk Signed-off-by: Shawn Guo --- arch/arm/configs/mxs_defconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb74..4edcfb4e4dee 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y -- cgit v1.2.3 From 6eec0152c4aa43636e180b21d5c71743f25d1220 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 30 Jul 2012 15:06:14 +0200 Subject: ARM: mxs: always build ocotp With this patch ocotp support will always be build into the kernel on mxs. Otherwise a DT-only kernel fails to link with: arch/arm/mach-mxs/mach-mxs.c:169: undefined reference to `mxs_get_ocotp' Signed-off-by: Marc Kleine-Budde Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/Kconfig | 6 ------ arch/arm/mach-mxs/Makefile | 3 +-- 2 files changed, 1 insertion(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b17cf1..9a8bbda195b2 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590ccb437..fed3695a1339 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o -- cgit v1.2.3 From 439793d4b3c99e550daebd868bbd58967c93d0b3 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 1 Aug 2012 17:01:42 +0300 Subject: KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value When MSR_KVM_PV_EOI_EN was added to msrs_to_save array KVM_SAVE_MSRS_BEGIN was not updated accordingly. Signed-off-by: Gleb Natapov Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 42bce48f6928..dce75b760312 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc); * kvm-specific. Those are put in the beginning of the list. */ -#define KVM_SAVE_MSRS_BEGIN 9 +#define KVM_SAVE_MSRS_BEGIN 10 static u32 msrs_to_save[] = { MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK, MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW, -- cgit v1.2.3 From 8bb8148c78317e9360a21a0e69a58be6862adb07 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 5 Aug 2012 22:37:55 +0200 Subject: ARM: integrator: use clk_prepare_enable() for timer The Integrator timer is using the clock framework to get the timer frequency, but missed to prepare the clock before enabling. Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann --- arch/arm/mach-integrator/integrator_ap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 7b1055c8e0b9..3b2267529f5e 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -456,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); -- cgit v1.2.3 From c31cc1b764b6efb713601d351c1a879c042eab34 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Mon, 6 Aug 2012 23:22:15 +0300 Subject: Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846" 1) The above commit introduced a common ->get_pendown_state() function into the generic code, but that function was board-specific for the OMAP3EVM and thus broke most other boards using this code. 2) The above commit was mis-merged introducing another bug which prevents the ads7846 driver probe function to succeed. The omap_ads7846_init() function frees the pendown GPIO in case there is no ->get_pendown_state() function set by the caller (board specific code), so it can be requested later by the ads7846 driver. The above commit add a common ->get_pendown_state() function without removing the gpio_free() call and thus once the ads7846 driver tries to use the pendown GPIO, it crashes as the pendown GPIO has not been requested. 3) The above commit introduces NO new functionality as get_pendown_state() function is already implemented in a suitable way by the ads7846 driver and the debounce time handling has already been fixed by commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code). This reverts commit 16aced80f6739beb2a6ff7b6f96c83ba80d331e8. Conflicts: arch/arm/mach-omap2/common-board-devices.c Solved by taking the working version prior to the above commit. Cc: Zumeng Chen Cc: Arnd Bergmann Signed-off-by: Igor Grinberg Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/board-omap3evm.c | 1 + arch/arm/mach-omap2/common-board-devices.c | 11 ----------- arch/arm/mach-omap2/common-board-devices.h | 1 - 3 files changed, 1 insertion(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5eb..0d362e9f9cb9 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457c..c1875862679f 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166b..a0b4a42836ab 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; -- cgit v1.2.3 From 5230f8fe9ad870ac24f23bca496347b87185c7c5 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 5 Aug 2012 14:01:28 +0800 Subject: ARM: dts: imx: add alias for gpio Add alias for gpio nodes, so that gpio driver can identify the port number and then specify a sensible gpio base rather than using the one dynamically allocated by gpio core. Signed-off-by: Shawn Guo Signed-off-by: Linus Walleij --- arch/arm/boot/dts/imx27.dtsi | 6 ++++++ arch/arm/boot/dts/imx51.dtsi | 4 ++++ arch/arm/boot/dts/imx53.dtsi | 7 +++++++ arch/arm/boot/dts/imx6q.dtsi | 7 +++++++ 4 files changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5ab..5303ab680a34 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53cbaa3d4f90..aba28dc87fc8 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index fc79cdc4b4e6..cd37165edce5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3d3c64b014e6..fd57079f71a9 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus { -- cgit v1.2.3 From a71eb61c9d077ec5019b35da6c883d67fc43d002 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 10 Jul 2012 03:57:32 +0200 Subject: ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pin According to the IGEPv2 Rev.C data-sheet the LAN9221i pin 14 (IRQ) is connected to the OMAP3730 mcspi1_cs2 pin. Since this omap mux pin acts as an IRQ line, it has to be configured as an input GPIO. IGEPv2 platform code sets the smsc911x_cfg->gpio_irq to GPIO 176 but since the mux pin default mode is MODE7 (safe_mode) the driver fails when trying to register the IRQ with the following error message: [ 1.994598] smsc911x: Driver version 2008-10-21 [ 3.704162] irq 272: nobody cared (try booting with the "irqpoll" option) [ 3.711364] [] (unwind_backtrace+0x0/0xf0) from [] (__report_bad_irq+0x20/0xbc) [ 3.720916] [] (__report_bad_irq+0x20/0xbc) from [] (note_interrupt+0x1d8/0x238) [ 3.730560] [] (note_interrupt+0x1d8/0x238) from [] (handle_irq_event_percpu+0xc0/0x260) [ 3.740936] [] (handle_irq_event_percpu+0xc0/0x260) from [] (handle_irq_event+0x3c/0x5c) [ 3.751312] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0xac/0x10c) [ 3.761047] [] (handle_level_irq+0xac/0x10c) from [] (generic_handle_irq+0x30/0x48) [ 3.770935] [] (generic_handle_irq+0x30/0x48) from [] (gpio_irq_handler+0x180/0x1d4) [ 3.780944] [] (gpio_irq_handler+0x180/0x1d4) from [] (generic_handle_irq+0x30/0x48) [ 3.790954] [] (generic_handle_irq+0x30/0x48) from [] (handle_IRQ+0x4c/0xac) [ 3.800231] [] (handle_IRQ+0x4c/0xac) from [] (omap3_intc_handle_irq+0x60/0x74) [ 3.809783] [] (omap3_intc_handle_irq+0x60/0x74) from [] (__irq_svc+0x44/0x60) [ 3.819213] Exception stack(0xee42fde0 to 0xee42fe28) [ 3.824554] fde0: 00000001 00000001 00000000 00000000 60000013 c06cce14 c06cce14 00000110 [ 3.833190] fe00: 00000000 c06ccdf4 60000013 ee41d000 fb058064 ee42fe28 c0089e08 c04976b4 [ 3.841796] fe20: 20000013 ffffffff [ 3.845489] [] (__irq_svc+0x44/0x60) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 3.855499] [] (_raw_spin_unlock_irqrestore+0x34/0x44) from [] (__setup_irq+0x1b8/0x3f0) [ 3.865875] [] (__setup_irq+0x1b8/0x3f0) from [] (request_threaded_irq+0xb8/0x140) [ 3.875701] [] (request_threaded_irq+0xb8/0x140) from [] (smsc911x_drv_probe+0x75c/0x11a4) [ 3.886260] [] (smsc911x_drv_probe+0x75c/0x11a4) from [] (platform_drv_probe+0x18/0x1c) [ 3.906707] [] (driver_probe_device+0x90/0x210) from [] (__driver_attach+0x94/0x98) [ 3.916625] [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x50/0x7c) [ 3.926177] [] (bus_for_each_dev+0x50/0x7c) from [] (bus_add_driver+0x184/0x248) [ 3.935821] [] (bus_add_driver+0x184/0x248) from [] (driver_register+0x78/0x12c) [ 3.945465] [] (driver_register+0x78/0x12c) from [] (do_one_initcall+0x34/0x178) [ 3.955108] [] (do_one_initcall+0x34/0x178) from [] (kernel_init+0xfc/0x1c0) [ 3.964385] [] (kernel_init+0xfc/0x1c0) from [] (kernel_thread_exit+0x0/0x8) [ 3.973632] handlers: [ 3.976043] [] smsc911x_irqhandler [ 3.980560] Disabling IRQ #272 Signed-off-by: Javier Martinez Canillas Acked-by: Enric Balletbo i Serra Tested-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482e..28214483aaba 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif -- cgit v1.2.3 From 5f789ebcbc06ff02a53d54f1602e36c9da30dd4c Mon Sep 17 00:00:00 2001 From: Afzal Mohammed Date: Wed, 4 Jul 2012 18:00:37 +0530 Subject: arm/dts: Fix am33xx wdt node Add am33xx wdt node. Signed-off-by: Afzal Mohammed [tony@atomide.com: I messed up and produced an empty commit db27ac80 with stg apply] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e5..bd0cff3f808c 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; -- cgit v1.2.3 From 9de76b6df70003b657d907571b17ac3c17cd9082 Mon Sep 17 00:00:00 2001 From: Javier Martin Date: Thu, 26 Jul 2012 13:20:34 +0200 Subject: i.MX27: Fix emma-prp and csi clocks. Naming of emma-prp related clocks for the i.MX27 is not correct. Signed-off-by: Javier Martin Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/clk-imx27.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313fb167..f69ca4680049 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); -- cgit v1.2.3 From acb11fe80a27f4b30fd38be6e6e35a0abc395401 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 13 Jul 2012 16:15:07 +0530 Subject: OMAP2+: Fix random config build break with !ARM_CPU_SUSPEND The random config builds with PM and !ARM_CPU_SUSPEND breaks with below error on omap2plus_defconfig. arch/arm/mach-omap2/sleep44xx.S:323: undefined reference to `cpu_resume' arch/arm/mach-omap2/omap-mpuss-lowpower.c:278: undefined reference to `cpu_suspend' This is because recently merged OMAP5 platform shares the common files with OMAP4 but doesn't select ARM_CPU_SUSPEND. Without the ARM_CPU_SUSPEND the sleep code is meaningless. Fix the same by adding ARM_CPU_SUSPEND for OMAP5. The suggestion came from Russell King in an off-list discussion. Cc: Russell King Cc: Kevin Hilman Reported-by: Tony Lindgren Signed-off-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f778..4a4d058ed146 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -69,6 +69,7 @@ config SOC_OMAP5 select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 -- cgit v1.2.3 From 3b6c9440873d97728998854feb3bc5ffb827dd99 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Sun, 5 Aug 2012 16:45:32 +0200 Subject: ARM: kirkwood: fix typo in Makefile.boot Just a small typo fix to make lsxl dtbs compile Signed-off-by: Sebastian Hesselbarth Cc: Jason Cooper Cc: Andrew Lunn Cc: Russell King Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Arnd Bergmann --- arch/arm/mach-kirkwood/Makefile.boot | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576abf409b..a5717558ee89 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -9,5 +9,5 @@ dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb -- cgit v1.2.3 From ae377aaf98630de03e58fffdf3f35dec3d0ca5e0 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 30 Jul 2012 18:42:19 +0530 Subject: arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on vcxio, v2v1 and v1v8 are expected to be always on, update the dtsi for twl6030 to reflect this. commit '86f5fc' regulator: core: Mark all DT based boards as having full constraints) caused these to be disabled at late boot causing OMAP4 boards (using twl6030) to lockup. Reported-by: Kishon Vijay Abraham I Reported-by: J Keerthy Signed-off-by: Rajendra nayak Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/twl6030.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7eb..d351b27d7213 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { -- cgit v1.2.3 From 128aa925ee7e9aa84943ce64df48192b92a81767 Mon Sep 17 00:00:00 2001 From: Domenico Andreoli Date: Sat, 14 Jul 2012 22:49:54 +0200 Subject: OMAP: remove unused parameter arch_id from uncompress.h There is not point in having arch_id as parameter of __arch_decomp_setup(), nothing in it uses arch_id. The machine id is already exported (and used) with symbol __machine_arch_type as per mach-types.h. Removing the pointless macro as well. Signed-off-by: Domenico Andreoli Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/uncompress.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a136781..7f7b112acccb 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ -- cgit v1.2.3 From 36b547aa20d1cf0d62bace7b8a9928aa33de36cd Mon Sep 17 00:00:00 2001 From: Michael Jones Date: Thu, 26 Jul 2012 17:44:44 +0200 Subject: omap2: mux: remove comment for nonexistent member remove comment for nonexistent member Signed-off-by: Michael Jones Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mux.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a16..76f9b3c2f586 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; -- cgit v1.2.3 From 265a2bc84247c9b9e3bb4fe275f16ba99551a7e7 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 16 Jul 2012 16:56:15 -0700 Subject: ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled The SYS_NIRQ1 pin is the interupt line for the PMIC part of the TWL6030 and interrupts from the PMIC are needed as wakeup sources. Ensure this pin is mux'd as input and has wakeup enabled so PMIC interupts (e.g. RTC) can be used as wakeup sources. Tested on 3430/n900, OMAP3530/Overo Fire, 3730/Overo FireSTORM, 3730/Beagle-xM. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/twl-common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba50..db5ff6642375 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; -- cgit v1.2.3 From e0e29fd74c3c8bd2ef83bbaa73d528d58a944610 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 7 Aug 2012 11:28:06 -0700 Subject: Revert "ARM: OMAP3: PM: call pre/post transition per powerdomain" This reverts commit 58f0829b7186150318c79515f0e0850c5e7a9c89. Converstion to per-pwrdm per/post transition calls was a bit premature. Only tracking MPU, PER & CORE in the idle path means we lose the accounting for all the other powerdomains which may also transition in idle. On OMAP3, due to autodeps, several powerdomains transition along with MPU (e.g. DSS, USBHOST), and the accounting for these was lost with this patch. Since the accounting includes the context loss counters, drivers for devices in those power domains would never notice context lost, so would likely hang after any off-mode transitions. This patch should be revisited when the upcoming clkdm/pwrmdm/voltdm use-counting seires is merged since then we can properly do accounting without relying on a call in the idle path. In addition, the original patch had another bug because the PER powerdomain accounting was not updated until after the GPIO resume hook is called. Since gpio_resume_after_idle() checks the context loss count (which is not yet updated) it would not properly restore context, leaving the GPIO banks in an undefined state. Cc: Jean Pihet Cc: Tero Kristo Cc: Rajendra Nayak Reported-by: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65dbd..05bd8f02723f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) -- cgit v1.2.3 From e1267371eacf2cbcf580e41f9e64a986cdaf5c1d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 7 Aug 2012 19:11:33 +0900 Subject: ARM: S3C24XX: Add missing DMACH_DT_PROP Commit 2b90807549 (spi: s3c64xx: add device tree support) requires the DMACH_DT_PROP element in the dma_ch enum. It's not used on non-DT platforms but has to be present nevertheless. So mimic the dummy-add of DMACH_DT_PROP on s3c64xx for s3c24xx machines, to correct the build breakage for the s3c24xx variants using the s3c64xx-spi-driver. Signed-off-by: Heiko Stuebner Cc: Stable Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/include/mach/dma.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b66037..ee99fd56c043 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, -- cgit v1.2.3 From b01858c7806e7e6f6121da2e51c9222fc4d21dc6 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 7 Aug 2012 19:12:05 +0900 Subject: ARM: S3C24XX: Fix s3c2410_dma_enqueue parameters Commit d670ac019f60 (ARM: SAMSUNG: DMA Cleanup as per sparse) changed the prototype of the s3c2410_dma_* functions to use the enum dma_ch instead of an generic unsigned int. In the s3c24xx dma.c s3c2410_dma_enqueue seems to have been forgotten, the other functions there were changed correctly. Signed-off-by: Heiko Stuebner Cc: Stable Signed-off-by: Kukjin Kim --- arch/arm/plat-s3c24xx/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f75380..db98e7021f0d 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); -- cgit v1.2.3 From c0401241c01705205ed6f2b88460df1133591f58 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 7 Aug 2012 19:17:14 +0900 Subject: ARM: Samsung: Make uart_save static in pm.c file Fixes the following sparse warning: arch/arm/plat-samsung/pm.c:77:21: warning: symbol 'uart_save' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdbc..15070284343e 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { -- cgit v1.2.3 From 54f32a35f4d3a653a18a2c8c239f19ae060bd803 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 13 Jul 2012 15:12:03 -0500 Subject: ARM: OMAP2+: Fix dmtimer set source clock failure Calling the dmtimer function omap_dm_timer_set_source() fails if following a call to pm_runtime_put() to disable the timer. For example the following sequence would fail to set the parent clock ... omap_dm_timer_stop(gptimer); omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); The following error message would be seen ... omap_dm_timer_set_source: failed to set timer_32k_ck as parent The problem is that, by design, pm_runtime_put() simply decrements the usage count and returns before the timer has actually been disabled. Therefore, setting the parent clock failed because the timer was still active when the trying to set the parent clock. Setting a parent clock will fail if the clock you are setting the parent of has a non-zero usage count. To ensure that this does not fail use pm_runtime_put_sync() when disabling the timer. Note that this will not be seen on OMAP1 devices, because these devices do not use the clock framework for dmtimers. Signed-off-by: Jon Hunter Acked-by: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a9..7b6689af0cce 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); -- cgit v1.2.3 From 70d291b215721ce60bde5761e3eaf6a15f7d7671 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: SAMSUNG: Set HDMI platform data for Exynos4x12 SoCs Adds support for setting HDMI platform data for Exynos4X12 SoCs. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce35538..3f3c941d9081 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -748,7 +748,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; -- cgit v1.2.3 From ee21ae6809e22676cd014ce02ec3b3387b436aa5 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: SAMSUNG: Add API to set platform data for s5p-tv driver Commit 350f2f4dad64 ("[media] v4l: s5p-tv: hdmi: add support for platform data") makes the presence of platform data mandatory for s5p-tv driver. Adding an API to plat-samsung for this purpose. Signed-off-by: Tushar Behera Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 26 ++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/hdmi.h | 16 ++++++++++++++++ 2 files changed, 42 insertions(+) create mode 100644 arch/arm/plat-samsung/include/plat/hdmi.h (limited to 'arch') diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 3f3c941d9081..fc49f3dabd76 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include #include +#include + #include #include #include @@ -760,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 000000000000..331d046ac2c5 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ -- cgit v1.2.3 From cceb840904d1c1f7ee453bfa9886117c6931bdbf Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: EXYNOS: Set HDMI platform data in SMDKV310 Sets HDMI platform data in SMDKV310 board. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-smdkv310.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274a..73f2bce097e1 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); -- cgit v1.2.3 From ccc61fd460fc1b20480dbb7e10b2ea82433bfd58 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Wed, 8 Aug 2012 13:12:19 +0900 Subject: ARM: EXYNOS: Set HDMI platform data in Origen board Signed-off-by: Tushar Behera Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-origen.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d7..4e574c24581c 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; -- cgit v1.2.3 From 6c691b5df1fcd93f2e9f65e1a8a3dd0e6fd158ea Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Tue, 7 Aug 2012 18:29:45 +0200 Subject: omap: Fix multi.h when only ARCH_OMAP3 and SOC_AM33XX are selected When only ARCH_OMAP3 (or -2,-4,...) and SOC_AM33XX are selected, multi.h doesn't set MULTI_OMAP2. In this case, cpu.h will simply define cpu_is_omap24xx() as 1. This causes problems for example for omap_hwmod.c:omap_hwmod_init which checks for cpu_is_omap24xx() first, using the wrong soc_ops for AM33xx. Fix this by defining MULTI_OMAP2 when using SOC_AM33XX together with something else. Signed-off-by: Jan Luebbe Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/multi.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f1067..324d31b14852 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ -- cgit v1.2.3 From 90f7f9acecc6dde87cf25db1ad7599926d6773f7 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Tue, 7 Aug 2012 19:44:01 +0530 Subject: ARM: OMAP2+: cpu: Add am33xx device under cpu_class_is_omap2 AM33XX device falls under omap2 class, so make cpu_class_is_omap2() macro true by adding soc_is_am33xx() to existing list of cpu/soc check. This is required to unblock the basic boot support on AM335x platform. Having done that, we still need to sort out properly from common zImage point of view without having to maintain this cpu/soc_is_xxx list. Signed-off-by: Vaibhav Hiremath Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcfff..bb5d08a70dbc 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 -- cgit v1.2.3 From d0503513817bc6175cededcbe146e06b0ea20f68 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 30 Jul 2012 10:04:39 +0200 Subject: s390/mm: remove MAX_PHYSADDR_BITS define It's unused, so remove it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/sparsemem.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h index 0fb34027d3f6..a60d085ddb4d 100644 --- a/arch/s390/include/asm/sparsemem.h +++ b/arch/s390/include/asm/sparsemem.h @@ -4,13 +4,11 @@ #ifdef CONFIG_64BIT #define SECTION_SIZE_BITS 28 -#define MAX_PHYSADDR_BITS 46 #define MAX_PHYSMEM_BITS 46 #else #define SECTION_SIZE_BITS 25 -#define MAX_PHYSADDR_BITS 31 #define MAX_PHYSMEM_BITS 31 #endif /* CONFIG_64BIT */ -- cgit v1.2.3 From c63cb468f373f479ff52b4a1b75f8ecdeaaf4f16 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 31 Jul 2012 15:37:13 +0200 Subject: s390/seccomp: add support for system call filtering using BPF Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 1 + arch/s390/include/asm/syscall.h | 10 ++++++++++ arch/s390/kernel/ptrace.c | 7 ++++++- 3 files changed, 17 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 76de6b68487c..107610e01a29 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -124,6 +124,7 @@ config S390 select GENERIC_TIME_VSYSCALL select GENERIC_CLOCKEVENTS select KTIME_SCALAR if 32BIT + select HAVE_ARCH_SECCOMP_FILTER config SCHED_OMIT_FRAME_POINTER def_bool y diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index fb214dd9b7e0..fe7b99759e12 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -12,6 +12,7 @@ #ifndef _ASM_SYSCALL_H #define _ASM_SYSCALL_H 1 +#include #include #include #include @@ -87,4 +88,13 @@ static inline void syscall_set_arguments(struct task_struct *task, regs->orig_gpr2 = args[0]; } +static inline int syscall_get_arch(struct task_struct *task, + struct pt_regs *regs) +{ +#ifdef CONFIG_COMPAT + if (test_tsk_thread_flag(task, TIF_31BIT)) + return AUDIT_ARCH_S390; +#endif + return sizeof(long) == 8 ? AUDIT_ARCH_S390X : AUDIT_ARCH_S390; +} #endif /* _ASM_SYSCALL_H */ diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index f4eb37680b91..e4be113fbac6 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -719,7 +719,11 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) long ret = 0; /* Do the secure computing check first. */ - secure_computing_strict(regs->gprs[2]); + if (secure_computing(regs->gprs[2])) { + /* seccomp failures shouldn't expose any additional code. */ + ret = -1; + goto out; + } /* * The sysc_tracesys code in entry.S stored the system @@ -745,6 +749,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) regs->gprs[2], regs->orig_gpr2, regs->gprs[3], regs->gprs[4], regs->gprs[5]); +out: return ret ?: regs->gprs[2]; } -- cgit v1.2.3 From 5ab37e1b226b7b40a44eea7d8d1fe19e67ff65a9 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 2 Aug 2012 09:11:23 +0200 Subject: s390: do not clobber personality flags in sys_32_personality() There are multiple errors in how sys_32_personality() handles personality flags stored in top three bytes. - directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. - directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Fix the first one by properly using personality() macro to compare only PER_MASK bytes. Fix the second one by setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/sys_s390.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index b4a29eee41b8..d0964d22adb5 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -81,11 +81,12 @@ SYSCALL_DEFINE1(s390_personality, unsigned int, personality) { unsigned int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) - personality = PER_LINUX32; + if (personality(current->personality) == PER_LINUX32 && + personality(personality) == PER_LINUX) + personality |= PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret &= ~PER_LINUX32; return ret; } -- cgit v1.2.3 From 82aabdb6f1eb61e0034ec23901480f5dd23db7c4 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 7 Aug 2012 09:48:13 +0200 Subject: s390/compat: fix compat wrappers for process_vm system calls The compat wrappers incorrectly called the non compat versions of the system process_vm system calls. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_wrapper.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index e835d6d5b7fd..2d82cfcbce5b 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1635,7 +1635,7 @@ ENTRY(compat_sys_process_vm_readv_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_readv + jg compat_sys_process_vm_readv ENTRY(compat_sys_process_vm_writev_wrapper) lgfr %r2,%r2 # compat_pid_t @@ -1645,4 +1645,4 @@ ENTRY(compat_sys_process_vm_writev_wrapper) llgfr %r6,%r6 # unsigned long llgf %r0,164(%r15) # unsigned long stg %r0,160(%r15) - jg sys_process_vm_writev + jg compat_sys_process_vm_writev -- cgit v1.2.3 From e85871218513c54f7dfdb6009043cb638f2fecbe Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 8 Aug 2012 09:32:20 +0200 Subject: s390/compat: fix mmap compat system calls The native 31 bit and the compat behaviour for the mmap system calls differ: In native 31 bit mode the passed in address for the mmap system call will be unmodified passed to sys_mmap_pgoff(). In compat mode however the passed in address will be modified with compat_ptr() which masks out the most significant bit. The result is that in native 31 bit mode each mmap request (with MAP_FIXED) will fail where the most significat bit is set, while in compat mode it may succeed. This odd behaviour was introduced with d3815898 "[S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls". To restore a consistent behaviour accross native and compat mode this patch functionally reverts the above mentioned commit. Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_linux.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index d1225089a4bb..f606d935f495 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -620,7 +620,6 @@ asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg) return -EFAULT; if (a.offset & ~PAGE_MASK) return -EINVAL; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); } @@ -631,7 +630,6 @@ asmlinkage long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) if (copy_from_user(&a, arg, sizeof(a))) return -EFAULT; - a.addr = (unsigned long) compat_ptr(a.addr); return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); } -- cgit v1.2.3 From c6fd893da927c6cefb2ece22402765379921a834 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Tue, 31 Jul 2012 10:29:14 -0700 Subject: x86, avx: don't use avx instructions with "noxsave" boot param Clear AVX, AVX2 features along with clearing XSAVE feature bits, as part of the parsing "noxsave" parameter. Fixes the kernel boot panic with "noxsave" boot parameter. We could have checked cpu_has_osxsave along with cpu_has_avx etc, but Peter mentioned clearing the feature bits will be better for uses like static_cpu_has() etc. Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1343755754.2041.2.camel@sbsiddha-desk.sc.intel.com Cc: # v3.5 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/common.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 46d8786d655e..a5fbc3c5fccc 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -144,6 +144,8 @@ static int __init x86_xsave_setup(char *s) { setup_clear_cpu_cap(X86_FEATURE_XSAVE); setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT); + setup_clear_cpu_cap(X86_FEATURE_AVX); + setup_clear_cpu_cap(X86_FEATURE_AVX2); return 1; } __setup("noxsave", x86_xsave_setup); -- cgit v1.2.3 From 800fb3ddee2c50918d651fbd70515f1e38857305 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 4 Aug 2012 21:54:05 -0400 Subject: sh: dma: fix request_irq usage When calling request_irq with IRQF_SHARED, the dev cookie must be set (i.e. non-NULL), otherwise the code rejects it immediately with -EINVAL. So restore the logic here where we'd pass a pointer to the name as a dummy unique val. Otherwise, booting up on my LANDISK system would fail with: DMAC Address Error0 request_irq fail This was introduced in commit 7f47c7189b3e8f19a589f77a3ad169d7b691b582. Signed-off-by: Mike Frysinger Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 4c171f13b0e8..b22565623142 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -335,7 +335,7 @@ static int dmae_irq_init(void) for (n = 0; n < NR_DMAE; n++) { int i = request_irq(get_dma_error_irq(n), dma_err, - IRQF_SHARED, dmae_name[n], NULL); + IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]); if (unlikely(i < 0)) { printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); return i; -- cgit v1.2.3 From d0b464d67001d202e59f7e60a30074c4d74021aa Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Tue, 7 Aug 2012 08:10:40 +0100 Subject: sh: sh7269: Fix LCD pinmux There are two ports that can output the LCD data, therefore they have to use separate pimux identifiers so we can select the one we want to use. Signed-off-by: Phil Edworthy Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh2a/cpu/sh7269.h | 36 ++++-- arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 195 +++++++++++++++++++------------- 2 files changed, 141 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h index 48d14498e774..2a0ca8780f0d 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h @@ -183,18 +183,30 @@ enum { GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0, GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK, GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE, - GPIO_FN_LCD_DATA23, GPIO_FN_LCD_DATA22, - GPIO_FN_LCD_DATA21, GPIO_FN_LCD_DATA20, - GPIO_FN_LCD_DATA19, GPIO_FN_LCD_DATA18, - GPIO_FN_LCD_DATA17, GPIO_FN_LCD_DATA16, - GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14, - GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12, - GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10, - GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8, - GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6, - GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4, - GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2, - GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0, + GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22, + GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20, + GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18, + GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16, + GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14, + GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12, + GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10, + GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8, + GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6, + GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4, + GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2, + GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0, + GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22, + GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20, + GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18, + GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16, + GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14, + GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12, + GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10, + GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8, + GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6, + GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4, + GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2, + GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0, GPIO_FN_LCD_M_DISP, }; diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c index f25127c46eca..039e4587dd9b 100644 --- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c @@ -758,12 +758,22 @@ enum { DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK, LCD_CLK_MARK, LCD_EXTCLK_MARK, LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK, - LCD_DATA23_MARK, LCD_DATA22_MARK, LCD_DATA21_MARK, LCD_DATA20_MARK, - LCD_DATA19_MARK, LCD_DATA18_MARK, LCD_DATA17_MARK, LCD_DATA16_MARK, - LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK, - LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK, - LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK, - LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK, + LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK, + LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK, + LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK, + LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK, + LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK, + LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK, + LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK, + LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK, + LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK, + LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK, + LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK, + LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK, + LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK, + LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK, + LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK, + LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK, LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK, LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK, LCD_M_DISP_MARK, @@ -1036,6 +1046,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PF1_DATA, PF1MD_000), PINMUX_DATA(BACK_MARK, PF1MD_001), + PINMUX_DATA(SSL10_MARK, PF1MD_011), PINMUX_DATA(TIOC4B_MARK, PF1MD_100), PINMUX_DATA(DACK0_MARK, PF1MD_101), @@ -1049,47 +1060,50 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PG27_DATA, PG27MD_00), PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10), PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11), + PINMUX_DATA(LCD_DE_MARK, PG27MD_11), PINMUX_DATA(PG26_DATA, PG26MD_00), PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10), + PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10), PINMUX_DATA(PG25_DATA, PG25MD_00), PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10), + PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10), PINMUX_DATA(PG24_DATA, PG24MD_00), PINMUX_DATA(LCD_CLK_MARK, PG24MD_10), PINMUX_DATA(PG23_DATA, PG23MD_000), - PINMUX_DATA(LCD_DATA23_MARK, PG23MD_010), + PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011), PINMUX_DATA(TXD5_MARK, PG23MD_100), PINMUX_DATA(PG22_DATA, PG22MD_000), - PINMUX_DATA(LCD_DATA22_MARK, PG22MD_010), + PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011), PINMUX_DATA(RXD5_MARK, PG22MD_100), PINMUX_DATA(PG21_DATA, PG21MD_000), PINMUX_DATA(DV_DATA7_MARK, PG21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011), PINMUX_DATA(TXD4_MARK, PG21MD_100), PINMUX_DATA(PG20_DATA, PG20MD_000), PINMUX_DATA(DV_DATA6_MARK, PG20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011), PINMUX_DATA(RXD4_MARK, PG20MD_100), PINMUX_DATA(PG19_DATA, PG19MD_000), PINMUX_DATA(DV_DATA5_MARK, PG19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PG19MD_010), + PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010), PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011), PINMUX_DATA(SCK5_MARK, PG19MD_100), PINMUX_DATA(PG18_DATA, PG18MD_000), PINMUX_DATA(DV_DATA4_MARK, PG18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PG18MD_010), + PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010), PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011), PINMUX_DATA(SCK4_MARK, PG18MD_100), @@ -1097,103 +1111,103 @@ static pinmux_enum_t pinmux_data[] = { // we're going with 2 bits PINMUX_DATA(PG17_DATA, PG17MD_00), PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01), - PINMUX_DATA(LCD_DATA17_MARK, PG17MD_10), + PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10), // TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description // we're going with 2 bits PINMUX_DATA(PG16_DATA, PG16MD_00), PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01), - PINMUX_DATA(LCD_DATA16_MARK, PG16MD_10), + PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10), PINMUX_DATA(PG15_DATA, PG15MD_00), PINMUX_DATA(D31_MARK, PG15MD_01), - PINMUX_DATA(LCD_DATA15_MARK, PG15MD_10), + PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10), PINMUX_DATA(PINT7_PG_MARK, PG15MD_11), PINMUX_DATA(PG14_DATA, PG14MD_00), PINMUX_DATA(D30_MARK, PG14MD_01), - PINMUX_DATA(LCD_DATA14_MARK, PG14MD_10), + PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10), PINMUX_DATA(PINT6_PG_MARK, PG14MD_11), PINMUX_DATA(PG13_DATA, PG13MD_00), PINMUX_DATA(D29_MARK, PG13MD_01), - PINMUX_DATA(LCD_DATA13_MARK, PG13MD_10), + PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10), PINMUX_DATA(PINT5_PG_MARK, PG13MD_11), PINMUX_DATA(PG12_DATA, PG12MD_00), PINMUX_DATA(D28_MARK, PG12MD_01), - PINMUX_DATA(LCD_DATA12_MARK, PG12MD_10), + PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10), PINMUX_DATA(PINT4_PG_MARK, PG12MD_11), PINMUX_DATA(PG11_DATA, PG11MD_000), PINMUX_DATA(D27_MARK, PG11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PG11MD_010), + PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010), PINMUX_DATA(PINT3_PG_MARK, PG11MD_011), PINMUX_DATA(TIOC3D_MARK, PG11MD_100), PINMUX_DATA(PG10_DATA, PG10MD_000), PINMUX_DATA(D26_MARK, PG10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PG10MD_010), + PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010), PINMUX_DATA(PINT2_PG_MARK, PG10MD_011), PINMUX_DATA(TIOC3C_MARK, PG10MD_100), PINMUX_DATA(PG9_DATA, PG9MD_000), PINMUX_DATA(D25_MARK, PG9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PG9MD_010), + PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010), PINMUX_DATA(PINT1_PG_MARK, PG9MD_011), PINMUX_DATA(TIOC3B_MARK, PG9MD_100), PINMUX_DATA(PG8_DATA, PG8MD_000), PINMUX_DATA(D24_MARK, PG8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PG8MD_010), + PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010), PINMUX_DATA(PINT0_PG_MARK, PG8MD_011), PINMUX_DATA(TIOC3A_MARK, PG8MD_100), PINMUX_DATA(PG7_DATA, PG7MD_000), PINMUX_DATA(D23_MARK, PG7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PG7MD_010), + PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010), PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011), PINMUX_DATA(TIOC2B_MARK, PG7MD_100), PINMUX_DATA(PG6_DATA, PG6MD_000), PINMUX_DATA(D22_MARK, PG6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PG6MD_010), + PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010), PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011), PINMUX_DATA(TIOC2A_MARK, PG6MD_100), PINMUX_DATA(PG5_DATA, PG5MD_000), PINMUX_DATA(D21_MARK, PG5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PG5MD_010), + PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010), PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011), PINMUX_DATA(TIOC1B_MARK, PG5MD_100), PINMUX_DATA(PG4_DATA, PG4MD_000), PINMUX_DATA(D20_MARK, PG4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PG4MD_010), + PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010), PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011), PINMUX_DATA(TIOC1A_MARK, PG4MD_100), PINMUX_DATA(PG3_DATA, PG3MD_000), PINMUX_DATA(D19_MARK, PG3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PG3MD_010), + PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010), PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011), PINMUX_DATA(TIOC0D_MARK, PG3MD_100), PINMUX_DATA(PG2_DATA, PG2MD_000), PINMUX_DATA(D18_MARK, PG2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PG2MD_010), + PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010), PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011), PINMUX_DATA(TIOC0C_MARK, PG2MD_100), PINMUX_DATA(PG1_DATA, PG1MD_000), PINMUX_DATA(D17_MARK, PG1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PG1MD_010), + PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010), PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011), PINMUX_DATA(TIOC0B_MARK, PG1MD_100), PINMUX_DATA(PG0_DATA, PG0MD_000), PINMUX_DATA(D16_MARK, PG0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PG0MD_010), + PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010), PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011), PINMUX_DATA(TIOC0A_MARK, PG0MD_100), @@ -1275,14 +1289,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ23_DATA, PJ23MD_000), PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001), - PINMUX_DATA(LCD_DATA23_MARK, PJ23MD_010), + PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011), PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100), PINMUX_DATA(CTX1_MARK, PJ23MD_101), PINMUX_DATA(PJ22_DATA, PJ22MD_000), PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001), - PINMUX_DATA(LCD_DATA22_MARK, PJ22MD_010), + PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011), PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100), PINMUX_DATA(CRX1_MARK, PJ22MD_101), @@ -1290,14 +1304,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ21_DATA, PJ21MD_000), PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PJ21MD_010), + PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011), PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100), PINMUX_DATA(CTX2_MARK, PJ21MD_101), PINMUX_DATA(PJ20_DATA, PJ20MD_000), PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PJ20MD_010), + PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010), PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011), PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100), PINMUX_DATA(CRX2_MARK, PJ20MD_101), @@ -1305,7 +1319,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ19_DATA, PJ19MD_000), PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PJ19MD_010), + PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010), PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011), PINMUX_DATA(TIOC0D_MARK, PJ19MD_100), PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101), @@ -1313,126 +1327,126 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ18_DATA, PJ18MD_000), PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PJ18MD_010), + PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010), PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011), PINMUX_DATA(TIOC0C_MARK, PJ18MD_100), PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101), PINMUX_DATA(PJ17_DATA, PJ17MD_000), PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001), - PINMUX_DATA(LCD_DATA17_MARK, PJ17MD_010), + PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010), PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011), PINMUX_DATA(TIOC0B_MARK, PJ17MD_100), PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101), PINMUX_DATA(PJ16_DATA, PJ16MD_000), PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001), - PINMUX_DATA(LCD_DATA16_MARK, PJ16MD_010), + PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010), PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011), PINMUX_DATA(TIOC0A_MARK, PJ16MD_100), PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101), PINMUX_DATA(PJ15_DATA, PJ15MD_000), PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001), - PINMUX_DATA(LCD_DATA15_MARK, PJ15MD_010), + PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010), PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011), PINMUX_DATA(PWM2H_MARK, PJ15MD_100), PINMUX_DATA(TXD7_MARK, PJ15MD_101), PINMUX_DATA(PJ14_DATA, PJ14MD_000), PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001), - PINMUX_DATA(LCD_DATA14_MARK, PJ14MD_010), + PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010), PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011), PINMUX_DATA(PWM2G_MARK, PJ14MD_100), PINMUX_DATA(TXD6_MARK, PJ14MD_101), PINMUX_DATA(PJ13_DATA, PJ13MD_000), PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001), - PINMUX_DATA(LCD_DATA13_MARK, PJ13MD_010), + PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010), PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011), PINMUX_DATA(PWM2F_MARK, PJ13MD_100), PINMUX_DATA(TXD5_MARK, PJ13MD_101), PINMUX_DATA(PJ12_DATA, PJ12MD_000), PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001), - PINMUX_DATA(LCD_DATA12_MARK, PJ12MD_010), + PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010), PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011), PINMUX_DATA(PWM2E_MARK, PJ12MD_100), PINMUX_DATA(SCK7_MARK, PJ12MD_101), PINMUX_DATA(PJ11_DATA, PJ11MD_000), PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PJ11MD_010), + PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010), PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011), PINMUX_DATA(PWM2D_MARK, PJ11MD_100), PINMUX_DATA(SCK6_MARK, PJ11MD_101), PINMUX_DATA(PJ10_DATA, PJ10MD_000), PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PJ10MD_010), + PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010), PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011), PINMUX_DATA(PWM2C_MARK, PJ10MD_100), PINMUX_DATA(SCK5_MARK, PJ10MD_101), PINMUX_DATA(PJ9_DATA, PJ9MD_000), PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PJ9MD_010), + PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010), PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011), PINMUX_DATA(PWM2B_MARK, PJ9MD_100), PINMUX_DATA(RTS5_MARK, PJ9MD_101), PINMUX_DATA(PJ8_DATA, PJ8MD_000), PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PJ8MD_010), + PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010), PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011), PINMUX_DATA(PWM2A_MARK, PJ8MD_100), PINMUX_DATA(CTS5_MARK, PJ8MD_101), PINMUX_DATA(PJ7_DATA, PJ7MD_000), PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PJ7MD_010), + PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010), PINMUX_DATA(SD_D2_MARK, PJ7MD_011), PINMUX_DATA(PWM1H_MARK, PJ7MD_100), PINMUX_DATA(PJ6_DATA, PJ6MD_000), PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PJ6MD_010), + PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010), PINMUX_DATA(SD_D3_MARK, PJ6MD_011), PINMUX_DATA(PWM1G_MARK, PJ6MD_100), PINMUX_DATA(PJ5_DATA, PJ5MD_000), PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PJ5MD_010), + PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010), PINMUX_DATA(SD_CMD_MARK, PJ5MD_011), PINMUX_DATA(PWM1F_MARK, PJ5MD_100), PINMUX_DATA(PJ4_DATA, PJ4MD_000), PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PJ4MD_010), + PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010), PINMUX_DATA(SD_CLK_MARK, PJ4MD_011), PINMUX_DATA(PWM1E_MARK, PJ4MD_100), PINMUX_DATA(PJ3_DATA, PJ3MD_000), PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PJ3MD_010), + PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010), PINMUX_DATA(SD_D0_MARK, PJ3MD_011), PINMUX_DATA(PWM1D_MARK, PJ3MD_100), PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PJ2MD_010), + PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010), PINMUX_DATA(SD_D1_MARK, PJ2MD_011), PINMUX_DATA(PWM1C_MARK, PJ2MD_100), PINMUX_DATA(PJ1_DATA, PJ1MD_000), PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PJ1MD_010), + PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010), PINMUX_DATA(SD_WP_MARK, PJ1MD_011), PINMUX_DATA(PWM1B_MARK, PJ1MD_100), PINMUX_DATA(PJ0_DATA, PJ0MD_000), PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PJ0MD_010), + PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010), PINMUX_DATA(SD_CD_MARK, PJ0MD_011), PINMUX_DATA(PWM1A_MARK, PJ0MD_100), }; @@ -1877,30 +1891,55 @@ static struct pinmux_gpio pinmux_gpios[] = { PINMUX_GPIO(GPIO_FN_LCD_HSYNC, LCD_HSYNC_MARK), PINMUX_GPIO(GPIO_FN_LCD_DE, LCD_DE_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA23, LCD_DATA23_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA22, LCD_DATA22_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA21, LCD_DATA21_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA20, LCD_DATA20_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA19, LCD_DATA19_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA18, LCD_DATA18_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA17, LCD_DATA17_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA16, LCD_DATA16_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PG23, LCD_DATA23_PG23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PG22, LCD_DATA22_PG22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PG21, LCD_DATA21_PG21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PG20, LCD_DATA20_PG20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PG19, LCD_DATA19_PG19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PG18, LCD_DATA18_PG18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PG17, LCD_DATA17_PG17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PG16, LCD_DATA16_PG16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PG15, LCD_DATA15_PG15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PG14, LCD_DATA14_PG14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PG13, LCD_DATA13_PG13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PG12, LCD_DATA12_PG12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PG11, LCD_DATA11_PG11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PG10, LCD_DATA10_PG10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PG9, LCD_DATA9_PG9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PG8, LCD_DATA8_PG8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PG7, LCD_DATA7_PG7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PG6, LCD_DATA6_PG6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PG5, LCD_DATA5_PG5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PG4, LCD_DATA4_PG4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PG3, LCD_DATA3_PG3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PG2, LCD_DATA2_PG2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PG1, LCD_DATA1_PG1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PG0, LCD_DATA0_PG0_MARK), + + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PJ23, LCD_DATA23_PJ23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PJ22, LCD_DATA22_PJ22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PJ21, LCD_DATA21_PJ21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PJ20, LCD_DATA20_PJ20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PJ19, LCD_DATA19_PJ19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PJ18, LCD_DATA18_PJ18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PJ17, LCD_DATA17_PJ17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PJ16, LCD_DATA16_PJ16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PJ15, LCD_DATA15_PJ15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PJ14, LCD_DATA14_PJ14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PJ13, LCD_DATA13_PJ13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PJ12, LCD_DATA12_PJ12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PJ11, LCD_DATA11_PJ11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PJ10, LCD_DATA10_PJ10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PJ9, LCD_DATA9_PJ9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PJ8, LCD_DATA8_PJ8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PJ7, LCD_DATA7_PJ7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PJ6, LCD_DATA6_PJ6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PJ5, LCD_DATA5_PJ5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PJ4, LCD_DATA4_PJ4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PJ3, LCD_DATA3_PJ3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PJ2, LCD_DATA2_PJ2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PJ1, LCD_DATA1_PJ1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PJ0, LCD_DATA0_PJ0_MARK), PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK), }; -- cgit v1.2.3 From 39f78e70567a07a6fc0d7a4ca9e3331e44dd400d Mon Sep 17 00:00:00 2001 From: Chris Brand Date: Tue, 7 Aug 2012 14:01:14 +0200 Subject: ARM: mm: fix MMU mapping of CMA regions Fix dma_contiguous_remap() so that it continues through all the regions, even after encountering one that is outside lowmem. Without this change, if you have two CMA regions, the first outside lowmem and the seocnd inside lowmem, only the second one will get set up in the MMU. Data written to that region then doesn't get automatically flushed from the cache into memory. Signed-off-by: Chris Brand [extended patch subject with 'fix' word] Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c2cdf6500f75..334dd79ad5e6 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -358,7 +358,7 @@ void __init dma_contiguous_remap(void) if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) - return; + continue; map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); -- cgit v1.2.3 From e4ea6918c93b9f59d34e8ca2124b2b64b1afe73b Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 7 Aug 2012 14:39:25 +0200 Subject: ARM: dma-mapping: fix atomic allocation alignment The alignment mask is calculated incorrectly. Fixing the calculation makes strange hangs/lockups disappear during the boot with Amstrad E3 and 3.6-rc1 kernel. Signed-off-by: Aaro Koskinen Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 334dd79ad5e6..4bdeccd24d93 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -423,7 +423,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) unsigned int pageno; unsigned long flags; void *ptr = NULL; - size_t align; + unsigned long align_mask; if (!pool->vaddr) { WARN(1, "coherent pool not initialised!\n"); @@ -435,11 +435,11 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) * small, so align them to their order in pages, minimum is a page * size. This helps reduce fragmentation of the DMA space. */ - align = PAGE_SIZE << get_order(size); + align_mask = (1 << get_order(size)) - 1; spin_lock_irqsave(&pool->lock, flags); pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, - 0, count, (1 << align) - 1); + 0, count, align_mask); if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; -- cgit v1.2.3 From d9e0d149b5dcc2ef4688afc572b9906bcda941ef Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 7 Aug 2012 14:44:05 +0200 Subject: ARM: dma-mapping: fix incorrect freeing of atomic allocations Commit e9da6e9905e639b0f842a244bc770b48ad0523e9 (ARM: dma-mapping: remove custom consistent dma region) changed the way atomic allocations are handled. However, arm_dma_free() was not modified accordingly, and as a result freeing of atomic allocations does not work correctly when CMA is disabled. Memory is leaked and following WARNINGs are seen: [ 57.698911] ------------[ cut here ]------------ [ 57.753518] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4() [ 57.811473] trying to free invalid coherent area: e0848000 [ 57.867398] Modules linked in: sata_mv(-) [ 57.921373] [] (unwind_backtrace+0x0/0xf0) from [] (warn_slowpath_common+0x50/0x68) [ 58.033924] [] (warn_slowpath_common+0x50/0x68) from [] (warn_slowpath_fmt+0x30/0x40) [ 58.152024] [] (warn_slowpath_fmt+0x30/0x40) from [] (arm_dma_free+0x88/0xe4) [ 58.219592] [] (arm_dma_free+0x88/0xe4) from [] (dma_pool_destroy+0x100/0x148) [ 58.345526] [] (dma_pool_destroy+0x100/0x148) from [] (release_nodes+0x144/0x218) [ 58.475782] [] (release_nodes+0x144/0x218) from [] (__device_release_driver+0x60/0xb8) [ 58.614260] [] (__device_release_driver+0x60/0xb8) from [] (driver_detach+0xd8/0xec) [ 58.756527] [] (driver_detach+0xd8/0xec) from [] (bus_remove_driver+0x7c/0xc4) [ 58.901648] [] (bus_remove_driver+0x7c/0xc4) from [] (sys_delete_module+0x19c/0x220) [ 59.051447] [] (sys_delete_module+0x19c/0x220) from [] (ret_fast_syscall+0x0/0x2c) [ 59.207996] ---[ end trace 0745420412c0325a ]--- [ 59.287110] ------------[ cut here ]------------ [ 59.366324] WARNING: at arch/arm/mm/dma-mapping.c:263 arm_dma_free+0x88/0xe4() [ 59.450511] trying to free invalid coherent area: e0847000 [ 59.534357] Modules linked in: sata_mv(-) [ 59.616785] [] (unwind_backtrace+0x0/0xf0) from [] (warn_slowpath_common+0x50/0x68) [ 59.790030] [] (warn_slowpath_common+0x50/0x68) from [] (warn_slowpath_fmt+0x30/0x40) [ 59.972322] [] (warn_slowpath_fmt+0x30/0x40) from [] (arm_dma_free+0x88/0xe4) [ 60.070701] [] (arm_dma_free+0x88/0xe4) from [] (dma_pool_destroy+0x100/0x148) [ 60.256817] [] (dma_pool_destroy+0x100/0x148) from [] (release_nodes+0x144/0x218) [ 60.445201] [] (release_nodes+0x144/0x218) from [] (__device_release_driver+0x60/0xb8) [ 60.634148] [] (__device_release_driver+0x60/0xb8) from [] (driver_detach+0xd8/0xec) [ 60.823623] [] (driver_detach+0xd8/0xec) from [] (bus_remove_driver+0x7c/0xc4) [ 61.013268] [] (bus_remove_driver+0x7c/0xc4) from [] (sys_delete_module+0x19c/0x220) [ 61.203472] [] (sys_delete_module+0x19c/0x220) from [] (ret_fast_syscall+0x0/0x2c) [ 61.393390] ---[ end trace 0745420412c0325b ]--- The patch fixes this. Signed-off-by: Aaro Koskinen Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4bdeccd24d93..4e7d1182e8a3 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -648,12 +648,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, if (arch_is_coherent() || nommu()) { __dma_free_buffer(page, size); + } else if (__free_from_pool(cpu_addr, size)) { + return; } else if (!IS_ENABLED(CONFIG_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { - if (__free_from_pool(cpu_addr, size)) - return; /* * Non-atomic allocations cannot be freed with IRQs disabled */ -- cgit v1.2.3 From 798bd59ce94c8218332996e650ded48ded039fe1 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 3 Aug 2012 17:45:21 -0600 Subject: ARM: tegra: more regulator fixes for Harmony Commit 3d55c29 "ARM: tegra: harmony: add regulator supply name and its input supply" was supposed to fix all the problems with regulators on Harmony. However, it appears that I only tested it when booting using board files, not when booting using device tree. This change fixes two problems with regulators when booting using device tree: 1) That patch only created the vdd_sys regulator when booting using a board file. Since this is the root of the whole regulator tree, this caused no regulators to successfully initialize when booting using device tree. The registration of vdd_sys is moved to fix this. 2) When booting use DT, the regulator core sets has_full_constraints, which in turn causes the core to turn off any regulators not marked as always on. Some of the affected regulators are required for basic system operation. To solve this, add always on constraints to all relevant regulators. This doesn't affect booting using a board file since nothing sets has_full_constraints in that case. Signed-off-by: Stephen Warren Signed-off-by: Arnd Bergmann --- arch/arm/mach-tegra/board-harmony-power.c | 32 ++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 8fd387bf31f0..b7344beec102 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ .supply_regulator = _supply, \ .constraints = { \ @@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ struct device_node *np; -- cgit v1.2.3 From 4eef6cbfcc03b294d9d334368a851b35b496ce53 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 16:21:37 +0000 Subject: Input: eeti_ts: pass gpio value instead of IRQ The EETI touchscreen asserts its IRQ line as soon as it has data in its internal buffers. The line is automatically deasserted once all data has been read via I2C. Hence, the driver has to monitor the GPIO line and cannot simply rely on the interrupt handler reception. In the current implementation of the driver, irq_to_gpio() is used to determine the GPIO number from the i2c_client's IRQ value. As irq_to_gpio() is not available on all platforms, this patch changes this and makes the driver ignore the passed in IRQ. Instead, a GPIO is added to the platform_data struct and gpio_to_irq is used to derive the IRQ from that GPIO. If this fails, bail out. The driver is only able to work in environments where the touchscreen GPIO can be mapped to an IRQ. Without this patch, building raumfeld_defconfig results in: drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active': drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by: Daniel Mack Signed-off-by: Arnd Bergmann Cc: stable@vger.kernel.org (v3.2+) Cc: Dmitry Torokhov Cc: Sven Neumann Cc: linux-input@vger.kernel.org Cc: Haojian Zhuang --- arch/arm/mach-pxa/raumfeld.c | 2 +- drivers/input/touchscreen/eeti_ts.c | 21 +++++++++++++-------- include/linux/input/eeti_ts.h | 1 + 3 files changed, 15 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed130e94..d89d87ae144c 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 503c7096ed36..908407efc672 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -48,7 +48,7 @@ struct eeti_ts_priv { struct input_dev *input; struct work_struct work; struct mutex mutex; - int irq, irq_active_high; + int irq_gpio, irq, irq_active_high; }; #define EETI_TS_BITDEPTH (11) @@ -62,7 +62,7 @@ struct eeti_ts_priv { static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) { - return gpio_get_value(irq_to_gpio(priv->irq)) == priv->irq_active_high; + return gpio_get_value(priv->irq_gpio) == priv->irq_active_high; } static void eeti_ts_read(struct work_struct *work) @@ -157,7 +157,7 @@ static void eeti_ts_close(struct input_dev *dev) static int __devinit eeti_ts_probe(struct i2c_client *client, const struct i2c_device_id *idp) { - struct eeti_ts_platform_data *pdata; + struct eeti_ts_platform_data *pdata = client->dev.platform_data; struct eeti_ts_priv *priv; struct input_dev *input; unsigned int irq_flags; @@ -199,9 +199,12 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, priv->client = client; priv->input = input; - priv->irq = client->irq; + priv->irq_gpio = pdata->irq_gpio; + priv->irq = gpio_to_irq(pdata->irq_gpio); - pdata = client->dev.platform_data; + err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name); + if (err < 0) + goto err1; if (pdata) priv->irq_active_high = pdata->irq_active_high; @@ -215,13 +218,13 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, err = input_register_device(input); if (err) - goto err1; + goto err2; err = request_irq(priv->irq, eeti_ts_isr, irq_flags, client->name, priv); if (err) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); - goto err2; + goto err3; } /* @@ -233,9 +236,11 @@ static int __devinit eeti_ts_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 0); return 0; -err2: +err3: input_unregister_device(input); input = NULL; /* so we dont try to free it below */ +err2: + gpio_free(pdata->irq_gpio); err1: input_free_device(input); kfree(priv); diff --git a/include/linux/input/eeti_ts.h b/include/linux/input/eeti_ts.h index f875b316249d..16625d799b6f 100644 --- a/include/linux/input/eeti_ts.h +++ b/include/linux/input/eeti_ts.h @@ -2,6 +2,7 @@ #define LINUX_INPUT_EETI_TS_H struct eeti_ts_platform_data { + int irq_gpio; unsigned int irq_active_high; }; -- cgit v1.2.3 From 9c97738c5d3378e8ee525ff7f9fc160be3c8ed92 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 04:59:34 +0000 Subject: ARM: sa1100: include linux/io.h in hackkit leds code The sa1100 definition of the io_p2v macro has changed in v3.6, and this one file stopped working because of that. Without this patch, building hackkit_defconfig results in: arch/arm/mach-sa1100/leds-hackkit.c: In function 'hackkit_leds_event': arch/arm/mach-sa1100/leds-hackkit.c:39:4: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration] Signed-off-by: Arnd Bergmann Cc: Russell King --- arch/arm/mach-sa1100/leds-hackkit.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a2352436e62..f8e47235babe 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include +#include #include #include -- cgit v1.2.3 From 35e7906145d6d487002b738271890a7e7936067e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 07:52:19 +0000 Subject: ARM: s3c24xx: use new PWM driver The samsung PWM driver has moved to the new PWM subsystem, which changed the Kconfig symbol for that driver, but the rx1950 and gta02 boards still uses the old one. Without this patch, building s3c2410_defconfig results in: arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_lcd_power': arch/arm/mach-s3c24xx/mach-rx1950.c:430: undefined reference to `pwm_config' arch/arm/mach-s3c24xx/mach-rx1950.c:431: undefined reference to `pwm_disable' arch/arm/mach-s3c24xx/mach-rx1950.c:437: undefined reference to `pwm_config' arch/arm/mach-s3c24xx/mach-rx1950.c:438: undefined reference to `pwm_enable' arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_exit': arch/arm/mach-s3c24xx/mach-rx1950.c:504: undefined reference to `pwm_free' arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_init': arch/arm/mach-s3c24xx/mach-rx1950.c:487: undefined reference to `pwm_request' Signed-off-by: Arnd Bergmann Reported-by: Tushar Behera Cc: Kukjin Kim --- arch/arm/mach-s3c24xx/Kconfig | 4 ++-- arch/arm/plat-samsung/Kconfig | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b70..d56b0f7f2b20 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c1df1f..9c3b90c3538e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system -- cgit v1.2.3 From b434f5c95d2d9318482fda3af615ebcda7e2c0da Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:31:24 +0000 Subject: ARM: integrator: include Without this patch, building integrator_defconfig results in: arch/arm/mach-integrator/core.c:150:1: warning: data definition has no type or storage class [enabled by default] arch/arm/mach-integrator/core.c:150:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] arch/arm/mach-integrator/core.c:150:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Arnd Bergmann Acked-by: Linus Walleij Cc: Russell King --- arch/arm/mach-integrator/core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ebf680bebdf2..3fa6c51390da 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From a33493775dd141a99bcd2aac9a5b6b7e8385b5a4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:48:12 +0000 Subject: ARM: imx: gpmi-nand depends on mxs-dma It is not currently possible to build the gpmi-nand driver without also building the mxs-dma driver. Clarify this Kconfig and enable both in the defconfig file so we can build it again with both enabled. drivers/built-in.o: In function `gpmi_dma_filter': clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann Acked-by: Dirk Behme Cc: Shawn Guo Cc: Sascha Hauer --- arch/arm/configs/imx_v6_v7_defconfig | 1 + drivers/mtd/nand/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b33..3c9f32f9b6b4 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 31bb7e5b504a..8ca417614c57 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -480,7 +480,7 @@ config MTD_NAND_NANDSIM config MTD_NAND_GPMI_NAND bool "GPMI NAND Flash Controller driver" - depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q) + depends on MTD_NAND && MXS_DMA help Enables NAND Flash support for IMX23 or IMX28. The GPMI controller is very powerful, with the help of BCH -- cgit v1.2.3 From 5b6e3eb576e8ad03264d46982afed77bdc6323a3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 9 Aug 2012 12:35:48 +0530 Subject: ARM: OMAP4: sleep: Save the complete used register stack frame OMAP4 sleep entry code even though itself don't use many CPU registers makes call to the v7_flush_dcache_all() which uses them. Since v7_flush_dcache_all() doesn't make use of stack, the caller must take care of the stack frame. Otherwise it will lead to corrupted stack frame. Fix it by saving used registers. Reported-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar Cc: Kevin Hilman Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/sleep44xx.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b193..91e71d8f46f0 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* -- cgit v1.2.3 From 196449de0c886e64b48d01bd7ee153656db92884 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Aug 2012 12:38:22 +0530 Subject: ARM: OMAP4: Register the OPP table only for 4430 device The 4430 OPP table was being registered for all other OMAP4 variants too, like 4460 and 4470 causing issues with cpufreq driver enabled. 4460 and 4470 devices have different OPPs as compared to 4430, and they should be populated seperately. As long as that happens, let the OPP table registeration happen only on 4430 device. Signed-off-by: Rajendra Nayak Acked-by: Santosh Shilimkar Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/opp4xxx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101b..c95415da23c2 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, -- cgit v1.2.3 From 8ab08c0c4c39f36d3bf89e03a4bc3e6898e1563c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 4 Aug 2012 10:28:33 +0000 Subject: ARM: exynos: exynos_pm_add_dev_to_genpd may be unused exynos_pm_add_dev_to_genpd is used if one or more out of a large number of Kconfig symbols are enabled. However the new exynos_defconfig selects none of those, so the function becomes unused. Marking it so lets the compiler automatically discard it. Without this patch, building exynos_defconfig results in: arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function] Signed-off-by: Arnd Bergmann Acked-by: Thomas Abraham Acked-by: Kukjin Kim Cc: Rafael J. Wysocki --- arch/arm/mach-exynos/pm_domains.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c00d24c..c0bc83a7663e 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { -- cgit v1.2.3 From 15b5eb2d913f857ad30b0b4f1cd6867495962221 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 3 May 2012 12:47:54 +0000 Subject: ARM: s3c24xx: enable CONFIG_BUG for tct_hammer Disabling CONFIG_BUG creates an insane amount of build warnings, which makes it useless to check for building defconfigs to see if new warnings show up. Without this patch, building tct_hammer_defconfig results in: net/packet/af_packet.c: In function 'tpacket_rcv': net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized] net/core/ethtool.c: In function 'ethtool_get_feature_mask': net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type] block/cfq-iosched.c: In function 'cfq_async_queue_prio': block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type] mm/bootmem.c: In function 'mark_bootmem': mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type] net/core/dev.c: In function 'skb_warn_bad_offload': net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable] drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup': include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized] (and many more) The size of vmlinux increases by 1.78% because of this: size obj-arm/vmlinux.nobug text data bss dec hex filename 2108474 116916 55352 2280742 22cd26 obj-arm/vmlinux size obj-arm/vmlinux.bug text data bss dec hex filename 2150804 116916 53696 2321416 236c08 obj-arm/vmlinux Signed-off-by: Arnd Bergmann Acked-by: Kukjin Kim Cc: Ben Dooks --- arch/arm/configs/tct_hammer_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458bef..71277a1591ba 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y -- cgit v1.2.3 From de9234306bb28fe6c8c3bb908e3f9956f5276a02 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 30 Apr 2012 14:03:33 +0000 Subject: ARM: davinci: remove broken ntosd2_init_i2c ntosd2_init_i2c walks the ntosd2_i2c_info array, which it expects to be populated with at least one member. gcc correctly warns about the out-of-bounds access here. Since this can not possibly work, it's better to disable i2c support entirely on this board. Without this patch, building davinci_all_defconfig results in: arch/arm/mach-davinci/board-neuros-osd2.c: In function 'davinci_ntosd2_init': arch/arm/mach-davinci/board-neuros-osd2.c:187:20: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Arnd Bergmann Acked-by: Sekhar Nori Cc: Kevin Hilman Cc: Andrey Porodko --- arch/arm/mach-davinci/board-neuros-osd2.c | 39 ------------------------------- 1 file changed, 39 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2fcca9..f6b9fc70161b 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); -- cgit v1.2.3 From 8e90e4cc33ac44fd58635dc1aa94d3fd2145e518 Mon Sep 17 00:00:00 2001 From: Zhao Chenhui Date: Tue, 7 Aug 2012 17:12:47 +0800 Subject: powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS Signed-off-by: Zhao Chenhui Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 03ee911c4577..99a4dd3b30cc 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -115,6 +115,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y +CONFIG_PATA_VIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_FS_ENET=y -- cgit v1.2.3 From 09a3017a585eb8567a7de15b426bb1dfb548bf0f Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Fri, 10 Aug 2012 18:48:31 +0800 Subject: powerpc/p4080ds: dts - add usb controller version info and port0 Add the missing usb controller version info and port0, which is required during setup usb phy. Signed-off-by: Shengzhou Liu Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/fsl/p4080si-post.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 8d35d2c1f694..4f9c9f682ecf 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -345,6 +345,13 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.0-0.dtsi" }; -- cgit v1.2.3 From c0db19dabf138741e078f6391fb132821c0d98b5 Mon Sep 17 00:00:00 2001 From: Yuanhan Liu Date: Wed, 8 Aug 2012 17:02:08 +0800 Subject: ARM: mmp: fix potential NULL dereference Fix the wrong logic: we should use || instead of && Cc: Leo Yan Cc: Eric Miao Signed-off-by: Yuanhan Liu Signed-off-by: Haojian Zhuang --- arch/arm/mach-mmp/sram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f9519372..7e8a5a2e1ec7 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); -- cgit v1.2.3 From 484d90eec884d814b005c9736bcf3fd018acba65 Mon Sep 17 00:00:00 2001 From: Andrew Boie Date: Fri, 10 Aug 2012 11:49:06 -0700 Subject: x86, build: Globally set -fno-pic GCC built with nonstandard options can enable -fpic by default. We never want this for 32-bit kernels and it will break the build. [ hpa: Notably the Android toolchain apparently does this. ] Change-Id: Iaab7d66e598b1c65ac4a4f0229eca2cd3d0d2898 Signed-off-by: Andrew Boie Link: http://lkml.kernel.org/r/1344624546-29691-1-git-send-email-andrew.p.boie@intel.com Signed-off-by: H. Peter Anvin --- arch/x86/Makefile | 4 ++++ arch/x86/boot/Makefile | 2 +- arch/x86/realmode/rm/Makefile | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276861ec..682e9c210baa 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -27,6 +27,10 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built + # with nonstandard options + KBUILD_CFLAGS += -fno-pic + # prevent gcc from keeping the stack 16 byte aligned KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 5a747dd884db..f7535bedc33f 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -57,7 +57,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index b2d534cab25f..88692871823f 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -72,7 +72,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -m32 -g -Os -D_SETUP -D__KERNEL__ -D_WAKEUP \ -Wall -Wstrict-prototypes \ -march=i386 -mregparm=3 \ -include $(srctree)/$(src)/../../boot/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ + -fno-strict-aliasing -fomit-frame-pointer -fno-pic \ $(call cc-option, -ffreestanding) \ $(call cc-option, -fno-toplevel-reorder,\ $(call cc-option, -fno-unit-at-a-time)) \ -- cgit v1.2.3 From f7e416eb923d0f9ff1e5e9b5c0e8b75ddd7db865 Mon Sep 17 00:00:00 2001 From: Venkatraman Sathiyamoorthy Date: Fri, 3 Aug 2012 07:58:33 +0100 Subject: ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology Get rid of this warning.. arch/arm/kernel/built-in.o(.text+0xac78): Section mismatch in reference from the function init_cpu_topology() to the function .init.text:parse_dt_topology() The function init_cpu_topology() references the function __init parse_dt_topology(). This is often because init_cpu_topology lacks a __init annotation or the annotation of parse_dt_topology is wrong. Signed-off-by: Venkatraman S Signed-off-by: Russell King --- arch/arm/kernel/topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e90..26c12c6440fc 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; -- cgit v1.2.3 From 3d9fb0038a9b02febb01efc79a4a5d97f1822a90 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 3 Aug 2012 17:24:14 +0100 Subject: ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled VFPv4 support depends on the VFPv3 context save/restore code, so only advertise support in the hwcaps if the kernel can actually handle it. Cc: # 3.1+ Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index fb849d044bde..c834b32af275 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -719,8 +719,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; -- cgit v1.2.3 From f1898f6be9a2e3690fb62d8307849b86a89cc36c Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 6 Aug 2012 18:43:42 +0100 Subject: ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks Now that ARM has implemented its spinlocks with tickets we don't need to use the generic lockbreak algorithm. Remove the Kconfig from ARM so that we use the arch_spin_is_contended() definition from the asm header. This also saves a word in each lock because we don't need the break_lock member anymore. Signed-off-by: Stephen Boyd Acked-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5..e4191ccbdb7a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -126,11 +126,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y -- cgit v1.2.3 From 237ec6f2e51d2fc2ff37c7c5f1ccc9264d09c85b Mon Sep 17 00:00:00 2001 From: Colin Cross Date: Tue, 7 Aug 2012 19:05:10 +0100 Subject: ARM: 7486/1: sched_clock: update epoch_cyc on resume Many clocks that are used to provide sched_clock will reset during suspend. If read_sched_clock returns 0 after suspend, sched_clock will appear to jump forward. This patch resets cd.epoch_cyc to the current value of read_sched_clock during resume, which causes sched_clock() just after suspend to return the same value as sched_clock() just before suspend. In addition, during the window where epoch_ns has been updated before suspend, but epoch_cyc has not been updated after suspend, it is unknown whether the clock has reset or not, and sched_clock() could return a bogus value. Add a suspended flag, and return the pre-suspend epoch_ns value during this period. The new behavior is triggered by calling setup_sched_clock_needs_suspend instead of setup_sched_clock. Signed-off-by: Colin Cross Reviewed-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/include/asm/sched_clock.h | 2 ++ arch/arm/kernel/sched_clock.c | 24 ++++++++++++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f757263438..05b8e82ec9f5 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc06..f4515393248d 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -21,6 +21,8 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); @@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -169,11 +181,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) -- cgit v1.2.3 From 47f1204329237a0f8655f5a9f14a38ac81946ca1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 17:51:18 +0100 Subject: ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present Swap entries are encoding in ptes such that !pte_present(pte) and pte_file(pte). The remaining bits of the descriptor are used to identify the swapfile and offset within it to the swap entry. When writing such a pte for a user virtual address, set_pte_at unconditionally sets the nG bit, which (in the case of LPAE) will corrupt the swapfile offset and lead to a BUG: [ 140.494067] swap_free: Unused swap offset entry 000763b4 [ 140.509989] BUG: Bad page map in process rs:main Q:Reg pte:0ec76800 pmd:8f92e003 This patch fixes the problem by only setting the nG bit for user mappings that are actually present. Cc: Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 34 ++++++++++++++++++---------------- arch/arm/mm/flush.c | 2 -- 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7d..d88f9f049e95 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e031..40ca11ed6e5f 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; -- cgit v1.2.3 From f5f2025ef3e2cdb593707cbf87378761f17befbe Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 17:51:19 +0100 Subject: ARM: 7488/1: mm: use 5 bits for swapfile type encoding Page migration encodes the pfn in the offset field of a swp_entry_t. For LPAE, we support physical addresses of up to 36 bits (due to sparsemem limitations with the size of page flags), requiring 24 bits to represent a pfn. A further 3 bits are used to encode a swp_entry into a pte, leaving 5 bits for the type field. Furthermore, the core code defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not get used. This patch reduces the width of the type field to 5 bits, allowing us to create up to 31 swapfiles of 64GB each. Cc: Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/pgtable.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index d88f9f049e95..41dc31f834c3 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -253,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) -- cgit v1.2.3 From 730a8128cd8978467eb1cf546b11014acb57d433 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 10 Aug 2012 19:13:36 +0100 Subject: ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems Commit 5a783cbc4836 ("ARM: 7478/1: errata: extend workaround for erratum #720789") added workarounds for erratum #720789 to the range TLB invalidation functions with the observation that the erratum only affects SMP platforms. However, when running an SMP_ON_UP kernel on a uniprocessor platform we must take care to preserve the ASID as the workaround is not required. This patch ensures that we don't set the ASID to 0 when flushing the TLB on such a system, preserving the original behaviour with the workaround disabled. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/tlb-v7.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index c2021139cb56..ea94765acf9a 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range) dsb mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT -#ifdef CONFIG_ARM_ERRATA_720789 - mov r3, #0 -#else asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) #endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT -- cgit v1.2.3 From 5b7cc3df955cf510a0d4174553fe0410f9fbdd4a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 6 Aug 2012 18:55:28 +0100 Subject: ARM: 7485/1: EXYNOS: use SGI0 to wake secondary CPUs Signed-off-by: Stephen Boyd Acked-by: Kukjin Kim Signed-off-by: Russell King --- arch/arm/mach-exynos/platsmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 36c3984aaa47..090e32b0cd54 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -139,7 +139,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); if (pen_release == -1) break; -- cgit v1.2.3 From 7ac68a4c1de6aac5b0bb231fe6d8505ebe5686d9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Aug 2012 00:22:28 +0100 Subject: ARM: Allow arm_memblock_steal() to remove memory from any RAM region Allow arm_memblock_steal() to remove memory from any RAM region, including highmem areas. This allows memory to be stolen from the very top of declared memory, including highmem areas, rather than our precious lowmem. Acked-by: Sascha Hauer Acked-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 9aec41fa80ae..ad722f1208a5 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -324,7 +324,7 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) BUG_ON(!arm_memblock_steal_permitted); - phys = memblock_alloc(size, align); + phys = memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE); memblock_free(phys, size); memblock_remove(phys, size); -- cgit v1.2.3 From 080fc66fb5b6feae19fbbe8c6cbd7b11a4dac636 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 13 Aug 2012 11:44:13 +0100 Subject: ARM: Bring back ARMv3 IO and user access code This partially reverts 357c9c1f07d4546bc3fbc0fd1044d96b114d14ed (ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs). Although we only support StrongARM on the RiscPC, we need to keep the ARMv3 user access code for this platform because the bus does not understand half-word load/stores. Reported-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/lib/Makefile | 23 +- arch/arm/lib/io-readsw-armv3.S | 106 ++++++++ arch/arm/lib/io-writesw-armv3.S | 126 +++++++++ arch/arm/lib/uaccess.S | 564 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 816 insertions(+), 3 deletions(-) create mode 100644 arch/arm/lib/io-readsw-armv3.S create mode 100644 arch/arm/lib/io-writesw-armv3.S create mode 100644 arch/arm/lib/uaccess.S (limited to 'arch') diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51c..af72969820b4 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 000000000000..88487c8c4f23 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 000000000000..49b800419e32 --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 000000000000..5c908b1cb8ed --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include +#include +#include +#include + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + -- cgit v1.2.3 From c5491d1ae1946d394389b83b31b87708e86dc4cf Mon Sep 17 00:00:00 2001 From: Timo Kokkonen Date: Sun, 12 Aug 2012 13:45:34 +0300 Subject: ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*() Calling omap_dm_timer_prepare while the spinlock is held is not allowed as sleeping functions are called later on during the preparation (namely within clk_get()). dm_timer_lock is only required for protecting the omap_timer_list. After the timer is marked as reserved, the lock is no longer needed and should be freed. Signed-off-by: Timo Kokkonen Cc: Tarun Kanti DebBarma Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 7b6689af0cce..938b50a33439 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); -- cgit v1.2.3 From cffa59baa5f1cf3e3e9e172697db48912471531c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 2 Aug 2012 12:55:27 +0200 Subject: perf, x86: Fix uncore_types_exit section mismatch Fix the following section mismatch: WARNING: arch/x86/kernel/cpu/built-in.o(.text+0x7ad9): Section mismatch in reference from the function uncore_types_exit() to the function .init.text:uncore_type_exit() The function uncore_types_exit() references the function __init uncore_type_exit(). This is often because uncore_types_exit lacks a __init annotation or the annotation of uncore_type_exit is wrong. caused by 14371cce03c2 ("perf: Add generic PCI uncore PMU device support"). Cc: Zheng Yan Cc: Ingo Molnar Signed-off-by: Borislav Petkov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1339741902-8449-8-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 7563fda9f033..a7ccd68aa13a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -2373,7 +2373,7 @@ static void __init uncore_type_exit(struct intel_uncore_type *type) type->attr_groups[1] = NULL; } -static void uncore_types_exit(struct intel_uncore_type **types) +static void __init uncore_types_exit(struct intel_uncore_type **types) { int i; for (i = 0; types[i]; i++) -- cgit v1.2.3 From ebb6cc03596cc89c89670473282ea46573feb34f Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 6 Aug 2012 13:11:21 +0800 Subject: perf/x86: Fixes for Nehalem-EX uncore driver This patch includes following fixes and update: - Only some events in the Sbox and Mbox can use the match/mask registers, add code to check this. - The format definitions for xbr_mm_cfg and xbr_match registers in the Rbox are wrong, xbr_mm_cfg should use 32 bits, xbr_match should use 64 bits. - Cleanup the Rbox code. Compute the addresses extra registers in the enable_event function instead of the hw_config function. This simplifies the code in nhmex_rbox_alter_er(). Signed-off-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344229882-3907-2-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 195 ++++++++++++-------------- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 1 + 2 files changed, 87 insertions(+), 109 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index a7ccd68aa13a..84434e2a676f 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -796,7 +796,6 @@ static struct intel_uncore_type *nhm_msr_uncores[] = { DEFINE_UNCORE_FORMAT_ATTR(event5, event, "config:1-5"); DEFINE_UNCORE_FORMAT_ATTR(counter, counter, "config:6-7"); -DEFINE_UNCORE_FORMAT_ATTR(mm_cfg, mm_cfg, "config:63"); DEFINE_UNCORE_FORMAT_ATTR(match, match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(mask, mask, "config2:0-63"); @@ -1032,24 +1031,22 @@ static struct intel_uncore_type nhmex_uncore_bbox = { static int nhmex_sbox_hw_config(struct intel_uncore_box *box, struct perf_event *event) { - struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; - struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; + struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event_extra *reg1 = &hwc->extra_reg; + struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - if (event->attr.config & NHMEX_S_PMON_MM_CFG_EN) { - reg1->config = event->attr.config1; - reg2->config = event->attr.config2; - } else { - reg1->config = ~0ULL; - reg2->config = ~0ULL; - } + /* only TO_R_PROG_EV event uses the match/mask register */ + if ((hwc->config & NHMEX_PMON_CTL_EV_SEL_MASK) != + NHMEX_S_EVENT_TO_R_PROG_EV) + return 0; if (box->pmu->pmu_idx == 0) reg1->reg = NHMEX_S0_MSR_MM_CFG; else reg1->reg = NHMEX_S1_MSR_MM_CFG; - reg1->idx = 0; - + reg1->config = event->attr.config1; + reg2->config = event->attr.config2; return 0; } @@ -1059,8 +1056,8 @@ static void nhmex_sbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - wrmsrl(reg1->reg, 0); - if (reg1->config != ~0ULL || reg2->config != ~0ULL) { + if (reg1->idx != EXTRA_REG_NONE) { + wrmsrl(reg1->reg, 0); wrmsrl(reg1->reg + 1, reg1->config); wrmsrl(reg1->reg + 2, reg2->config); wrmsrl(reg1->reg, NHMEX_S_PMON_MM_CFG_EN); @@ -1074,7 +1071,6 @@ static struct attribute *nhmex_uncore_sbox_formats_attr[] = { &format_attr_edge.attr, &format_attr_inv.attr, &format_attr_thresh8.attr, - &format_attr_mm_cfg.attr, &format_attr_match.attr, &format_attr_mask.attr, NULL, @@ -1264,7 +1260,8 @@ again: } /* for the match/mask registers */ - if ((uncore_box_is_fake(box) || !reg2->alloc) && + if (reg2->idx != EXTRA_REG_NONE && + (uncore_box_is_fake(box) || !reg2->alloc) && !nhmex_mbox_get_shared_reg(box, reg2->idx, reg2->config)) goto fail; @@ -1278,7 +1275,8 @@ again: if (idx[0] != 0xff && idx[0] != __BITS_VALUE(reg1->idx, 0, 8)) nhmex_mbox_alter_er(event, idx[0], true); reg1->alloc |= alloc; - reg2->alloc = 1; + if (reg2->idx != EXTRA_REG_NONE) + reg2->alloc = 1; } return NULL; fail: @@ -1342,9 +1340,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event struct extra_reg *er; unsigned msr; int reg_idx = 0; - - if (WARN_ON_ONCE(reg1->idx != -1)) - return -EINVAL; /* * The mbox events may require 2 extra MSRs at the most. But only * the lower 32 bits in these MSRs are significant, so we can use @@ -1355,11 +1350,6 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event continue; if (event->attr.config1 & ~er->valid_mask) return -EINVAL; - if (er->idx == __BITS_VALUE(reg1->idx, 0, 8) || - er->idx == __BITS_VALUE(reg1->idx, 1, 8)) - continue; - if (WARN_ON_ONCE(reg_idx >= 2)) - return -EINVAL; msr = er->msr + type->msr_offset * box->pmu->pmu_idx; if (WARN_ON_ONCE(msr >= 0xffff || er->idx >= 0xff)) @@ -1368,6 +1358,8 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event /* always use the 32~63 bits to pass the PLD config */ if (er->idx == EXTRA_REG_NHMEX_M_PLD) reg_idx = 1; + else if (WARN_ON_ONCE(reg_idx > 0)) + return -EINVAL; reg1->idx &= ~(0xff << (reg_idx * 8)); reg1->reg &= ~(0xffff << (reg_idx * 16)); @@ -1376,17 +1368,21 @@ static int nhmex_mbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->config = event->attr.config1; reg_idx++; } - /* use config2 to pass the filter config */ - reg2->idx = EXTRA_REG_NHMEX_M_FILTER; - if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) - reg2->config = event->attr.config2; - else - reg2->config = ~0ULL; - if (box->pmu->pmu_idx == 0) - reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; - else - reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; - + /* + * The mbox only provides ability to perform address matching + * for the PLD events. + */ + if (reg_idx == 2) { + reg2->idx = EXTRA_REG_NHMEX_M_FILTER; + if (event->attr.config2 & NHMEX_M_PMON_MM_CFG_EN) + reg2->config = event->attr.config2; + else + reg2->config = ~0ULL; + if (box->pmu->pmu_idx == 0) + reg2->reg = NHMEX_M0_MSR_PMU_MM_CFG; + else + reg2->reg = NHMEX_M1_MSR_PMU_MM_CFG; + } return 0; } @@ -1422,34 +1418,36 @@ static void nhmex_mbox_msr_enable_event(struct intel_uncore_box *box, struct per wrmsrl(__BITS_VALUE(reg1->reg, 1, 16), nhmex_mbox_shared_reg_config(box, idx)); - wrmsrl(reg2->reg, 0); - if (reg2->config != ~0ULL) { - wrmsrl(reg2->reg + 1, - reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); - wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & - (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); - wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + if (reg2->idx != EXTRA_REG_NONE) { + wrmsrl(reg2->reg, 0); + if (reg2->config != ~0ULL) { + wrmsrl(reg2->reg + 1, + reg2->config & NHMEX_M_PMON_ADDR_MATCH_MASK); + wrmsrl(reg2->reg + 2, NHMEX_M_PMON_ADDR_MASK_MASK & + (reg2->config >> NHMEX_M_PMON_ADDR_MASK_SHIFT)); + wrmsrl(reg2->reg, NHMEX_M_PMON_MM_CFG_EN); + } } wrmsrl(hwc->config_base, hwc->config | NHMEX_PMON_CTL_EN_BIT0); } -DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); -DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); -DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); -DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); -DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); -DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); -DEFINE_UNCORE_FORMAT_ATTR(filter_cfg, filter_cfg, "config2:63"); -DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); -DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); -DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); -DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(count_mode, count_mode, "config:2-3"); +DEFINE_UNCORE_FORMAT_ATTR(storage_mode, storage_mode, "config:4-5"); +DEFINE_UNCORE_FORMAT_ATTR(wrap_mode, wrap_mode, "config:6"); +DEFINE_UNCORE_FORMAT_ATTR(flag_mode, flag_mode, "config:7"); +DEFINE_UNCORE_FORMAT_ATTR(inc_sel, inc_sel, "config:9-13"); +DEFINE_UNCORE_FORMAT_ATTR(set_flag_sel, set_flag_sel, "config:19-21"); +DEFINE_UNCORE_FORMAT_ATTR(filter_cfg_en, filter_cfg_en, "config2:63"); +DEFINE_UNCORE_FORMAT_ATTR(filter_match, filter_match, "config2:0-33"); +DEFINE_UNCORE_FORMAT_ATTR(filter_mask, filter_mask, "config2:34-61"); +DEFINE_UNCORE_FORMAT_ATTR(dsp, dsp, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(thr, thr, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(fvc, fvc, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pgt, pgt, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(map, map, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(iss, iss, "config1:0-31"); +DEFINE_UNCORE_FORMAT_ATTR(pld, pld, "config1:32-63"); static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_count_mode.attr, @@ -1458,7 +1456,7 @@ static struct attribute *nhmex_uncore_mbox_formats_attr[] = { &format_attr_flag_mode.attr, &format_attr_inc_sel.attr, &format_attr_set_flag_sel.attr, - &format_attr_filter_cfg.attr, + &format_attr_filter_cfg_en.attr, &format_attr_filter_match.attr, &format_attr_filter_mask.attr, &format_attr_dsp.attr, @@ -1513,7 +1511,7 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) struct hw_perf_event_extra *reg1 = &hwc->extra_reg; int port; - /* adjust the main event selector */ + /* adjust the main event selector and extra register index */ if (reg1->idx % 2) { reg1->idx--; hwc->config -= 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1522,29 +1520,17 @@ void nhmex_rbox_alter_er(struct intel_uncore_box *box, struct perf_event *event) hwc->config += 1 << NHMEX_R_PMON_CTL_EV_SEL_SHIFT; } - /* adjust address or config of extra register */ + /* adjust extra register config */ port = reg1->idx / 6 + box->pmu->pmu_idx * 4; switch (reg1->idx % 6) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; case 2: - /* the 8~15 bits to the 0~7 bits */ + /* shift the 8~15 bits to the 0~7 bits */ reg1->config >>= 8; break; case 3: - /* the 0~7 bits to the 8~15 bits */ + /* shift the 0~7 bits to the 8~15 bits */ reg1->config <<= 8; break; - case 4: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - break; - case 5: - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - break; }; } @@ -1671,7 +1657,7 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &event->hw.extra_reg; struct hw_perf_event_extra *reg2 = &event->hw.branch_reg; - int port, idx; + int idx; idx = (event->hw.config & NHMEX_R_PMON_CTL_EV_SEL_MASK) >> NHMEX_R_PMON_CTL_EV_SEL_SHIFT; @@ -1681,27 +1667,11 @@ static int nhmex_rbox_hw_config(struct intel_uncore_box *box, struct perf_event reg1->idx = idx; reg1->config = event->attr.config1; - port = idx / 6 + box->pmu->pmu_idx * 4; - idx %= 6; - switch (idx) { - case 0: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG0(port); - break; - case 1: - reg1->reg = NHMEX_R_MSR_PORTN_IPERF_CFG1(port); - break; - case 2: - case 3: - reg1->reg = NHMEX_R_MSR_PORTN_QLX_CFG(port); - break; + switch (idx % 6) { case 4: case 5: - if (idx == 4) - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port); - else - reg1->reg = NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port); - reg2->config = event->attr.config2; hwc->config |= event->attr.config & (~0ULL << 32); + reg2->config = event->attr.config2; break; }; return 0; @@ -1727,28 +1697,34 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per struct hw_perf_event *hwc = &event->hw; struct hw_perf_event_extra *reg1 = &hwc->extra_reg; struct hw_perf_event_extra *reg2 = &hwc->branch_reg; - int idx, er_idx; + int idx, port; - idx = reg1->idx % 6; - er_idx = idx; - if (er_idx > 2) - er_idx--; - er_idx += (reg1->idx / 6) * 5; + idx = reg1->idx; + port = idx / 6 + box->pmu->pmu_idx * 4; - switch (idx) { + switch (idx % 6) { case 0: + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG0(port), reg1->config); + break; case 1: - wrmsrl(reg1->reg, reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_IPERF_CFG1(port), reg1->config); break; case 2: case 3: - wrmsrl(reg1->reg, nhmex_rbox_shared_reg_config(box, er_idx)); + wrmsrl(NHMEX_R_MSR_PORTN_QLX_CFG(port), + nhmex_rbox_shared_reg_config(box, 2 + (idx / 6) * 5)); break; case 4: + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET1_MASK(port), reg2->config); + break; case 5: - wrmsrl(reg1->reg, reg1->config); - wrmsrl(reg1->reg + 1, hwc->config >> 32); - wrmsrl(reg1->reg + 2, reg2->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MM_CFG(port), + hwc->config >> 32); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MATCH(port), reg1->config); + wrmsrl(NHMEX_R_MSR_PORTN_XBR_SET2_MASK(port), reg2->config); break; }; @@ -1756,8 +1732,8 @@ static void nhmex_rbox_msr_enable_event(struct intel_uncore_box *box, struct per (hwc->config & NHMEX_R_PMON_CTL_EV_SEL_MASK)); } -DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config:32-63"); -DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config1:0-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_mm_cfg, xbr_mm_cfg, "config:32-63"); +DEFINE_UNCORE_FORMAT_ATTR(xbr_match, xbr_match, "config1:0-63"); DEFINE_UNCORE_FORMAT_ATTR(xbr_mask, xbr_mask, "config2:0-63"); DEFINE_UNCORE_FORMAT_ATTR(qlx_cfg, qlx_cfg, "config1:0-15"); DEFINE_UNCORE_FORMAT_ATTR(iperf_cfg, iperf_cfg, "config1:0-31"); @@ -2303,6 +2279,7 @@ int uncore_pmu_event_init(struct perf_event *event) event->hw.idx = -1; event->hw.last_tag = ~0ULL; event->hw.extra_reg.idx = EXTRA_REG_NONE; + event->hw.branch_reg.idx = EXTRA_REG_NONE; if (event->attr.config == UNCORE_FIXED_EVENT) { /* no fixed counter */ diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index c9e5dc56630a..8384e9b543b7 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -230,6 +230,7 @@ #define NHMEX_S1_MSR_MASK 0xe5a #define NHMEX_S_PMON_MM_CFG_EN (0x1ULL << 63) +#define NHMEX_S_EVENT_TO_R_PROG_EV 0 /* NHM-EX Mbox */ #define NHMEX_M0_MSR_GLOBAL_CTL 0xca0 -- cgit v1.2.3 From cb37af77124e8532e6ae3f9ca332593ba423b5f8 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Mon, 6 Aug 2012 13:11:22 +0800 Subject: perf/x86: Add Intel Westmere-EX uncore support The Westmere-EX uncore is similar to the Nehalem-EX uncore. The differences are: - Westmere-EX uncore has 10 instances of Cbox. The MSRs for Cbox8 and Cbox9 in the Westmere-EX aren't contiguous with Cbox 0~7. - The fvid field in the ZDP_CTL_FVC register in the Mbox is different. It's 5 bits in the Nehalem-EX, 6 bits in the Westmere-EX. Signed-off-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1344229882-3907-3-git-send-email-zheng.z.yan@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 56 ++++++++++++++++++++++----- arch/x86/kernel/cpu/perf_event_intel_uncore.h | 45 ++++++++++----------- 2 files changed, 68 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 84434e2a676f..0a5571080e74 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -901,16 +901,21 @@ static struct attribute_group nhmex_uncore_cbox_format_group = { .attrs = nhmex_uncore_cbox_formats_attr, }; +/* msr offset for each instance of cbox */ +static unsigned nhmex_cbox_msr_offsets[] = { + 0x0, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, 0x240, 0x2c0, +}; + static struct intel_uncore_type nhmex_uncore_cbox = { .name = "cbox", .num_counters = 6, - .num_boxes = 8, + .num_boxes = 10, .perf_ctr_bits = 48, .event_ctl = NHMEX_C0_MSR_PMON_EV_SEL0, .perf_ctr = NHMEX_C0_MSR_PMON_CTR0, .event_mask = NHMEX_PMON_RAW_EVENT_MASK, .box_ctl = NHMEX_C0_MSR_PMON_GLOBAL_CTL, - .msr_offset = NHMEX_C_MSR_OFFSET, + .msr_offsets = nhmex_cbox_msr_offsets, .pair_ctr_ctl = 1, .ops = &nhmex_uncore_ops, .format_group = &nhmex_uncore_cbox_format_group @@ -1138,6 +1143,9 @@ static struct extra_reg nhmex_uncore_mbox_extra_regs[] = { EVENT_EXTRA_END }; +/* Nehalem-EX or Westmere-EX ? */ +bool uncore_nhmex; + static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 config) { struct intel_uncore_extra_reg *er; @@ -1167,18 +1175,29 @@ static bool nhmex_mbox_get_shared_reg(struct intel_uncore_box *box, int idx, u64 return false; /* mask of the shared fields */ - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK; + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK; er = &box->shared_regs[EXTRA_REG_NHMEX_M_ZDP_CTL_FVC]; raw_spin_lock_irqsave(&er->lock, flags); /* add mask of the non-shared field if it's in use */ - if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) - mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (__BITS_VALUE(atomic_read(&er->ref), idx, 8)) { + if (uncore_nhmex) + mask |= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask |= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + } if (!atomic_read(&er->ref) || !((er->config ^ config) & mask)) { atomic_add(1 << (idx * 8), &er->ref); - mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | - NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + mask = NHMEX_M_PMON_ZDP_CTL_FVC_MASK | + NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + mask = WSMEX_M_PMON_ZDP_CTL_FVC_MASK | + WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); er->config &= ~mask; er->config |= (config & mask); ret = true; @@ -1212,7 +1231,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) /* get the non-shared control bits and shift them */ idx = orig_idx - EXTRA_REG_NHMEX_M_ZDP_CTL_FVC; - config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + if (uncore_nhmex) + config &= NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); + else + config &= WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(idx); if (new_idx > orig_idx) { idx = new_idx - orig_idx; config <<= 3 * idx; @@ -1222,6 +1244,10 @@ u64 nhmex_mbox_alter_er(struct perf_event *event, int new_idx, bool modify) } /* add the shared control bits back */ + if (uncore_nhmex) + config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; + else + config |= WSMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; config |= NHMEX_M_PMON_ZDP_CTL_FVC_MASK & reg1->config; if (modify) { /* adjust the main event selector */ @@ -1480,6 +1506,12 @@ static struct uncore_event_desc nhmex_uncore_mbox_events[] = { { /* end: all zeroes */ }, }; +static struct uncore_event_desc wsmex_uncore_mbox_events[] = { + INTEL_UNCORE_EVENT_DESC(bbox_cmds_read, "inc_sel=0xd,fvc=0x5000"), + INTEL_UNCORE_EVENT_DESC(bbox_cmds_write, "inc_sel=0xd,fvc=0x5040"), + { /* end: all zeroes */ }, +}; + static struct intel_uncore_ops nhmex_uncore_mbox_ops = { NHMEX_UNCORE_OPS_COMMON_INIT(), .enable_event = nhmex_mbox_msr_enable_event, @@ -2791,7 +2823,13 @@ static int __init uncore_cpu_init(void) snbep_uncore_cbox.num_boxes = max_cores; msr_uncores = snbep_msr_uncores; break; - case 46: + case 46: /* Nehalem-EX */ + uncore_nhmex = true; + case 47: /* Westmere-EX aka. Xeon E7 */ + if (!uncore_nhmex) + nhmex_uncore_mbox.event_descs = wsmex_uncore_mbox_events; + if (nhmex_uncore_cbox.num_boxes > max_cores) + nhmex_uncore_cbox.num_boxes = max_cores; msr_uncores = nhmex_msr_uncores; break; default: diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/kernel/cpu/perf_event_intel_uncore.h index 8384e9b543b7..5b81c1856aac 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.h @@ -276,18 +276,12 @@ NHMEX_M_PMON_CTL_INC_SEL_MASK | \ NHMEX_M_PMON_CTL_SET_FLAG_SEL_MASK) - -#define NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK 0x1f -#define NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK (0x7 << 5) -#define NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK (0x7 << 8) -#define NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR (1 << 23) -#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK \ - (NHMEX_M_PMON_ZDP_CTL_FVC_FVID_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_BCMD_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_RSP_MASK | \ - NHMEX_M_PMON_ZDP_CTL_FVC_PBOX_INIT_ERR) +#define NHMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 11) - 1) | (1 << 23)) #define NHMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (11 + 3 * (n))) +#define WSMEX_M_PMON_ZDP_CTL_FVC_MASK (((1 << 12) - 1) | (1 << 24)) +#define WSMEX_M_PMON_ZDP_CTL_FVC_EVENT_MASK(n) (0x7 << (12 + 3 * (n))) + /* * use the 9~13 bits to select event If the 7th bit is not set, * otherwise use the 19~21 bits to select event. @@ -369,6 +363,7 @@ struct intel_uncore_type { unsigned num_shared_regs:8; unsigned single_fixed:1; unsigned pair_ctr_ctl:1; + unsigned *msr_offsets; struct event_constraint unconstrainted; struct event_constraint *constraints; struct intel_uncore_pmu *pmus; @@ -486,29 +481,31 @@ unsigned uncore_pci_perf_ctr(struct intel_uncore_box *box, int idx) return idx * 8 + box->pmu->type->perf_ctr; } -static inline -unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_box_offset(struct intel_uncore_box *box) +{ + struct intel_uncore_pmu *pmu = box->pmu; + return pmu->type->msr_offsets ? + pmu->type->msr_offsets[pmu->pmu_idx] : + pmu->type->msr_offset * pmu->pmu_idx; +} + +static inline unsigned uncore_msr_box_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->box_ctl) return 0; - return box->pmu->type->box_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->box_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctl(struct intel_uncore_box *box) { if (!box->pmu->type->fixed_ctl) return 0; - return box->pmu->type->fixed_ctl + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctl + uncore_msr_box_offset(box); } -static inline -unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) +static inline unsigned uncore_msr_fixed_ctr(struct intel_uncore_box *box) { - return box->pmu->type->fixed_ctr + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + return box->pmu->type->fixed_ctr + uncore_msr_box_offset(box); } static inline @@ -516,7 +513,7 @@ unsigned uncore_msr_event_ctl(struct intel_uncore_box *box, int idx) { return box->pmu->type->event_ctl + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline @@ -524,7 +521,7 @@ unsigned uncore_msr_perf_ctr(struct intel_uncore_box *box, int idx) { return box->pmu->type->perf_ctr + (box->pmu->type->pair_ctr_ctl ? 2 * idx : idx) + - box->pmu->type->msr_offset * box->pmu->pmu_idx; + uncore_msr_box_offset(box); } static inline -- cgit v1.2.3 From 26a4f3c08de49c1437a7b7f97693cf22d8c31656 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Thu, 9 Aug 2012 11:52:34 +0300 Subject: perf/x86: disable PEBS on a guest entry. If PMU counter has PEBS enabled it is not enough to disable counter on a guest entry since PEBS memory write can overshoot guest entry and corrupt guest memory. Disabling PEBS during guest entry solves the problem. Tested-by: David Ahern Signed-off-by: Gleb Natapov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120809085234.GI3341@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/perf_event_intel.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 382366977d4c..7f2739e03e79 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -1522,8 +1522,16 @@ static struct perf_guest_switch_msr *intel_guest_get_msrs(int *nr) arr[0].msr = MSR_CORE_PERF_GLOBAL_CTRL; arr[0].host = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask; arr[0].guest = x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_host_mask; + /* + * If PMU counter has PEBS enabled it is not enough to disable counter + * on a guest entry since PEBS memory write can overshoot guest entry + * and corrupt guest memory. Disabling PEBS solves the problem. + */ + arr[1].msr = MSR_IA32_PEBS_ENABLE; + arr[1].host = cpuc->pebs_enabled; + arr[1].guest = 0; - *nr = 1; + *nr = 2; return arr; } -- cgit v1.2.3 From e18287d301bf56dd820137026d51ab38cf6c2e83 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 5 Aug 2012 15:04:42 +0000 Subject: ARM: mv78xx0: fix win_cfg_base prototype Patch b6d1c33a31 "ARM: Orion: Consolidate the address map setup" tried to merge the address map for the four orion platforms, but apparently got it wrong for mv78xx0. Admittedly I don't understand what this code actually does, but it's clear that the current version is wrong. Without this patch, building mv78xx0_defconfig results in: arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: initialization from incompatible pointer type [enabled by default] arch/arm/mach-mv78xx0/addr-map.c:59:2: warning: (near initialization for 'addr_map_cfg.win_cfg_base') [enabled by default] Signed-off-by: Arnd Bergmann Acked-by: Andrew Lunn Cc: Michael Walle Cc: Nicolas Pitre --- arch/arm/mach-mv78xx0/addr-map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710efd..a9bc84180d21 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. -- cgit v1.2.3 From f1c6300183dbf5b9da25988e13f6f25a9e27151b Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 8 Aug 2012 12:16:52 -0700 Subject: x86, apic: fix broken legacy interrupts in the logical apic mode Recent commit 332afa656e76458ee9cf0f0d123016a0658539e4 cleaned up a workaround that updates irq_cfg domain for legacy irq's that are handled by the IO-APIC. This was assuming that the recent changes in assign_irq_vector() were sufficient to remove the workaround. But this broke couple of AMD platforms. One of them seems to be sending interrupts to the offline cpu's, resulting in spurious "No irq handler for vector xx (irq -1)" messages when those cpu's come online. And the other platform seems to always send the interrupt to the last logical CPU (cpu-7). Recent changes had an unintended side effect of using only logical cpu-0 in the IO-APIC RTE (during boot for the legacy interrupts) and this broke the legacy interrupts not getting routed to the cpu-7 on the AMD platform, resulting in a boot hang. For now, reintroduce the removed workaround, (essentially not allowing the vector to change for legacy irq's when io-apic starts to handle the irq. Which also addressed the uninteded sife effect of just specifying cpu-0 in the IO-APIC RTE for those irq's during boot). Reported-and-tested-by: Robert Richter Reported-and-tested-by: Borislav Petkov Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1344453412.29170.5.camel@sbsiddha-desk.sc.intel.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/apic/io_apic.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index a6c64aaddf9a..c265593ec2cd 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1356,6 +1356,16 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, if (!IO_APIC_IRQ(irq)) return; + /* + * For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC + * can handle this irq and the apic driver is finialized at this point, + * update the cfg->domain. + */ + if (irq < legacy_pic->nr_legacy_irqs && + cpumask_equal(cfg->domain, cpumask_of(0))) + apic->vector_allocation_domain(0, cfg->domain, + apic->target_cpus()); + if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; -- cgit v1.2.3 From f026cfa82f628db24b8cea41b9d6202af104cecb Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 14 Aug 2012 09:53:38 -0700 Subject: Revert "x86-64/efi: Use EFI to deal with platform wall clock" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit bacef661acdb634170a8faddbc1cf28e8f8b9eee. This commit has been found to cause serious regressions on a number of ASUS machines at the least. We probably need to provide a 1:1 map in addition to the EFI virtual memory map in order for this to work. Signed-off-by: H. Peter Anvin Reported-and-bisected-by: Jérôme Carretero Cc: Jan Beulich Cc: Matt Fleming Cc: Matthew Garrett Cc: Linus Torvalds Cc: Andrew Morton Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu --- arch/x86/mm/pageattr.c | 10 ++++------ arch/x86/platform/efi/efi.c | 30 ++++++++++++++++++++++++++---- include/linux/efi.h | 2 ++ init/main.c | 8 ++++---- 4 files changed, 36 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 931930a96160..a718e0d23503 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -919,13 +919,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages, /* * On success we use clflush, when the CPU supports it to - * avoid the wbindv. If the CPU does not support it, in the - * error case, and during early boot (for EFI) we fall back - * to cpa_flush_all (which uses wbinvd): + * avoid the wbindv. If the CPU does not support it and in the + * error case we fall back to cpa_flush_all (which uses + * wbindv): */ - if (early_boot_irqs_disabled) - __cpa_flush_all((void *)(long)cache); - else if (!ret && cpu_has_clflush) { + if (!ret && cpu_has_clflush) { if (cpa.flags & (CPA_PAGES_ARRAY | CPA_ARRAY)) { cpa_flush_array(addr, numpages, cache, cpa.flags, pages); diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 2dc29f51e75a..92660edaa1e7 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -234,7 +234,22 @@ static efi_status_t __init phys_efi_set_virtual_address_map( return status; } -static int efi_set_rtc_mmss(unsigned long nowtime) +static efi_status_t __init phys_efi_get_time(efi_time_t *tm, + efi_time_cap_t *tc) +{ + unsigned long flags; + efi_status_t status; + + spin_lock_irqsave(&rtc_lock, flags); + efi_call_phys_prelog(); + status = efi_call_phys2(efi_phys.get_time, virt_to_phys(tm), + virt_to_phys(tc)); + efi_call_phys_epilog(); + spin_unlock_irqrestore(&rtc_lock, flags); + return status; +} + +int efi_set_rtc_mmss(unsigned long nowtime) { int real_seconds, real_minutes; efi_status_t status; @@ -263,7 +278,7 @@ static int efi_set_rtc_mmss(unsigned long nowtime) return 0; } -static unsigned long efi_get_time(void) +unsigned long efi_get_time(void) { efi_status_t status; efi_time_t eft; @@ -606,13 +621,18 @@ static int __init efi_runtime_init(void) } /* * We will only need *early* access to the following - * EFI runtime service before set_virtual_address_map + * two EFI runtime services before set_virtual_address_map * is invoked. */ + efi_phys.get_time = (efi_get_time_t *)runtime->get_time; efi_phys.set_virtual_address_map = (efi_set_virtual_address_map_t *) runtime->set_virtual_address_map; - + /* + * Make efi_get_time can be called before entering + * virtual mode. + */ + efi.get_time = phys_efi_get_time; early_iounmap(runtime, sizeof(efi_runtime_services_t)); return 0; @@ -700,10 +720,12 @@ void __init efi_init(void) efi_enabled = 0; return; } +#ifdef CONFIG_X86_32 if (efi_native) { x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; } +#endif #if EFI_DEBUG print_efi_memmap(); diff --git a/include/linux/efi.h b/include/linux/efi.h index 103adc6d7e3a..ec45ccd8708a 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -503,6 +503,8 @@ extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); +extern unsigned long efi_get_time(void); +extern int efi_set_rtc_mmss(unsigned long nowtime); extern void efi_reserve_boot_services(void); extern struct efi_memory_map memmap; diff --git a/init/main.c b/init/main.c index e60679de61c3..b28673087ac0 100644 --- a/init/main.c +++ b/init/main.c @@ -461,10 +461,6 @@ static void __init mm_init(void) percpu_init_late(); pgtable_cache_init(); vmalloc_init(); -#ifdef CONFIG_X86 - if (efi_enabled) - efi_enter_virtual_mode(); -#endif } asmlinkage void __init start_kernel(void) @@ -606,6 +602,10 @@ asmlinkage void __init start_kernel(void) calibrate_delay(); pidmap_init(); anon_vma_init(); +#ifdef CONFIG_X86 + if (efi_enabled) + efi_enter_virtual_mode(); +#endif thread_info_cache_init(); cred_init(); fork_init(totalram_pages); -- cgit v1.2.3 From 2856cc2e4d0852c3ddaae9dcb19cb9396512eb08 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 15 Aug 2012 00:37:29 -0700 Subject: sparc64: Be less verbose during vmemmap population. On a 2-node machine with 256GB of ram we get 512 lines of console output, which is just too much. This mimicks Yinghai Lu's x86 commit c2b91e2eec9678dbda274e906cc32ea8f711da3b (x86_64/mm: check and print vmemmap allocation continuous) except that we aren't ever going to get contiguous block pointers in between calls so just print when the virtual address or node changes. This decreases the output by an order of 16. Also demote this to KERN_DEBUG. Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 6026fdd1b2ed..d58edf5fefdb 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -2020,6 +2020,9 @@ EXPORT_SYMBOL(_PAGE_CACHE); #ifdef CONFIG_SPARSEMEM_VMEMMAP unsigned long vmemmap_table[VMEMMAP_SIZE]; +static long __meminitdata addr_start, addr_end; +static int __meminitdata node_start; + int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) { unsigned long vstart = (unsigned long) start; @@ -2050,15 +2053,30 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) *vmem_pp = pte_base | __pa(block); - printk(KERN_INFO "[%p-%p] page_structs=%lu " - "node=%d entry=%lu/%lu\n", start, block, nr, - node, - addr >> VMEMMAP_CHUNK_SHIFT, - VMEMMAP_SIZE); + /* check to see if we have contiguous blocks */ + if (addr_end != addr || node_start != node) { + if (addr_start) + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = addr; + node_start = node; + } + addr_end = addr + VMEMMAP_CHUNK; } } return 0; } + +void __meminit vmemmap_populate_print_last(void) +{ + if (addr_start) { + printk(KERN_DEBUG " [%lx-%lx] on node %d\n", + addr_start, addr_end-1, node_start); + addr_start = 0; + addr_end = 0; + node_start = 0; + } +} #endif /* CONFIG_SPARSEMEM_VMEMMAP */ static void prot_init_common(unsigned long page_none, -- cgit v1.2.3 From 89868730a756feca7e4b21a97c86487cd565ed22 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 13 Aug 2012 19:57:31 +0100 Subject: ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE Seems that Thomas' and my patches collided during the last merge window. Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e4191ccbdb7a..6d6e18fee9fe 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,7 +38,6 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) -- cgit v1.2.3 From 58569aee5a1a5dcc25c34a0a2ed9a377874e6b05 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Thu, 26 Jul 2012 12:15:46 +0200 Subject: ARM: Orion: Set eth packet size csum offload limit The mv643xx ethernet controller limits the packet size for the TX checksum offloading. This patch sets this limits for Kirkwood and Dove which have smaller limits that the default. As a side note, this patch is an updated version of a patch sent some years ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html which seems to have been lost. Signed-off-by: Arnaud Patard Signed-off-by: Jason Cooper Cc: --- arch/arm/mach-dove/common.c | 3 ++- arch/arm/mach-kirkwood/common.c | 4 ++-- arch/arm/mach-mv78xx0/common.c | 6 ++++-- arch/arm/mach-orion5x/common.c | 3 ++- arch/arm/plat-orion/common.c | 8 ++++++-- arch/arm/plat-orion/include/plat/common.h | 6 ++++-- include/linux/mv643xx_eth.h | 2 ++ 7 files changed, 22 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a7..6321567d8eaa 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfce..3226077735b1 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9c..3057f7d4329a 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0de..410291c67666 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87dc014..b8b747a9d360 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb213609..ae2377ef63e5 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 51bf8ada6dc0..49258e0ed1c6 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -15,6 +15,8 @@ #define MV643XX_ETH_SIZE_REG_4 0x2224 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 +#define MV643XX_TX_CSUM_DEFAULT_LIMIT 0 + struct mv643xx_eth_shared_platform_data { struct mbus_dram_target_info *dram; struct platform_device *shared_smi; -- cgit v1.2.3 From 03810a20308af54d01b096bc19a8c145684bd6b2 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:35:56 +0200 Subject: ARM: Kirkwood: Fix iconnect leds While converting, a led has been missed leading to wrong power blue led definition. Add it back and fix the gpio used on the power blue led. Signed-off-by: Arnaud Patard Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-iconnect.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d947045106..f8ca6fa88192 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; -- cgit v1.2.3 From b74ffd85e32d44e8ed405a2a0a175ef4cd39cf67 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Sun, 5 Aug 2012 22:35:57 +0200 Subject: ARM: Kirkwood: fix Makefile.boot While building the dtbs target, one is getting: make dtbs make[1]: *** No rule to make target `arch/arm/boot/kirkwood-qnap-ts219.dtb', needed by `arch/arm/boot/dtbs'. Stop. make: *** [dtbs] Error 2 The reason is that there's no kirkwood-qnap-ts219.dts file. Update Makefile.boot to reflect the dts files present. Signed-off-by: Arnaud Patard Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/Makefile.boot | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576abf409b..e2ad35803d27 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb -- cgit v1.2.3 From 6330c790dae1229bb33571c48984ca42a8a4c250 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 15 Aug 2012 11:52:01 -0400 Subject: C6X: add Lx_CACHE_SHIFT defines C6X currently lacks Lx_CACHE_SHIFT defines which are needed in a few places in the generic kernel. This patch adds _SHIFT defines for the various caches and bases the Lx_CACHE_BYTES defines on them. Signed-off-by: Mark Salter --- arch/c6x/include/asm/cache.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h index 6d521d96d941..09c5a0f5f4d1 100644 --- a/arch/c6x/include/asm/cache.h +++ b/arch/c6x/include/asm/cache.h @@ -1,7 +1,7 @@ /* * Port on Texas Instruments TMS320C6x architecture * - * Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated + * Copyright (C) 2005, 2006, 2009, 2010, 2012 Texas Instruments Incorporated * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) * * This program is free software; you can redistribute it and/or modify @@ -16,9 +16,14 @@ /* * Cache line size */ -#define L1D_CACHE_BYTES 64 -#define L1P_CACHE_BYTES 32 -#define L2_CACHE_BYTES 128 +#define L1D_CACHE_SHIFT 6 +#define L1D_CACHE_BYTES (1 << L1D_CACHE_SHIFT) + +#define L1P_CACHE_SHIFT 5 +#define L1P_CACHE_BYTES (1 << L1P_CACHE_SHIFT) + +#define L2_CACHE_SHIFT 7 +#define L2_CACHE_BYTES (1 << L2_CACHE_SHIFT) /* * L2 used as cache @@ -29,7 +34,8 @@ * For practical reasons the L1_CACHE_BYTES defines should not be smaller than * the L2 line size */ -#define L1_CACHE_BYTES L2_CACHE_BYTES +#define L1_CACHE_SHIFT L2_CACHE_SHIFT +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #define L2_CACHE_ALIGN_LOW(x) \ (((x) & ~(L2_CACHE_BYTES - 1))) -- cgit v1.2.3 From 01ddd9a809b9a95df097ff1b5565f806e681a606 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 15 Aug 2012 12:12:16 -0400 Subject: C6X: select GENERIC_ATOMIC64 The generic atomic64 support came in 2009 to support the perf subsystem with the expectation that all architectures would implement atomic64 support. Since then, other optional parts of the generic kernel have also come to expect atomic64 support. This patch enables generic atomic64 support for C6X architecture. Signed-off-by: Mark Salter --- arch/c6x/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig index 052f81a76239..983c859e40b7 100644 --- a/arch/c6x/Kconfig +++ b/arch/c6x/Kconfig @@ -6,6 +6,7 @@ config C6X def_bool y select CLKDEV_LOOKUP + select GENERIC_ATOMIC64 select GENERIC_IRQ_SHOW select HAVE_ARCH_TRACEHOOK select HAVE_DMA_API_DEBUG -- cgit v1.2.3 From 04f995a544d1289ffb8108849cd71b1325c5af6a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 6 Aug 2012 00:03:28 +0000 Subject: KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code In handling the H_CEDE hypercall, if this vcpu has already been prodded (with the H_PROD hypercall, which Linux guests don't in fact use), we branch to a numeric label '1f'. Unfortunately there is another '1:' label before the one that we want to jump to. This fixes the problem by using a textual label, 'kvm_cede_prodded'. It also changes the label for another longish branch from '2:' to 'kvm_cede_exit' to avoid a possible future problem if code modifications add another numeric '2:' label in between. Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 5a84c8d3d040..44b72feaff7d 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 - bne 1f + bne kvm_cede_prodded li r0,0 /* set trap to 0 to say hcall is handled */ stw r0,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) BEGIN_FTR_SECTION - b 2f /* just send it up to host on 970 */ + b kvm_cede_exit /* just send it up to host on 970 */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* @@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) or r4,r4,r0 PPC_POPCNTW(R7,R4) cmpw r7,r8 - bge 2f + bge kvm_cede_exit stwcx. r4,0,r6 bne 31b li r0,1 @@ -1555,7 +1555,8 @@ kvm_end_cede: b hcall_real_fallback /* cede when already previously prodded case */ -1: li r0,0 +kvm_cede_prodded: + li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) @@ -1563,7 +1564,8 @@ kvm_end_cede: blr /* we've ceded but we want to give control to the host */ -2: li r3,H_TOO_HARD +kvm_cede_exit: + li r3,H_TOO_HARD blr secondary_too_late: -- cgit v1.2.3 From 249ba1ee0f8fcb4e40caa5fbea11dafde201cc46 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Fri, 3 Aug 2012 13:56:33 +0200 Subject: KVM: PPC: Add cache flush on page map When we map a page that wasn't icache cleared before, do so when first mapping it in KVM using the same information bits as the Linux mapping logic. That way we are 100% sure that any page we map does not have stale entries in the icache. Signed-off-by: Alexander Graf --- arch/powerpc/include/asm/kvm_host.h | 1 + arch/powerpc/include/asm/kvm_ppc.h | 12 ++++++++++++ arch/powerpc/kvm/book3s_32_mmu_host.c | 3 +++ arch/powerpc/kvm/book3s_64_mmu_host.c | 2 ++ arch/powerpc/kvm/e500_tlb.c | 3 +++ arch/powerpc/mm/mem.c | 1 + 6 files changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 50ea12fd7bf5..a8bf5c673a3c 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #include #include #include +#include #define KVM_MAX_VCPUS NR_CPUS #define KVM_MAX_VCORES NR_CPUS diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 0124937a23b9..e006f0bdea95 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid); void kvmppc_free_lpid(long lpid); void kvmppc_init_lpid(unsigned long nr_lpids); +static inline void kvmppc_mmu_flush_icache(pfn_t pfn) +{ + /* Clear i-cache for new pages */ + struct page *page; + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index f922c29bb234..837f13e7b6bf 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -211,6 +211,9 @@ next_pteg: pteg1 |= PP_RWRX; } + if (orig_pte->may_execute) + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); + local_irq_disable(); if (pteg[rr]) { diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 10fc8ec9d2a8..0688b6b39585 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) if (!orig_pte->may_execute) rflags |= HPTE_R_N; + else + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index c510fc961302..fb3bb3ad8b3c 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, ref, gvaddr, stlbe); + + /* Clear i-cache for new pages */ + kvmppc_mmu_flush_icache(pfn); } /* XXX only map the one-one case, for now use TLB0 */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index baaafde7d135..fbdad0e3929a 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif } +EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { -- cgit v1.2.3 From e8143ccb6b501f78bb95d9c5ee100d18423008cf Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 14 Aug 2012 12:10:09 +0000 Subject: ppc: e500_tlb memset clears nothing Put the parameters the right way around Addresses https://bugzilla.kernel.org/show_bug.cgi?id=44031 Reported-by: David Binderman Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Alexander Graf --- arch/powerpc/kvm/e500_tlb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index fb3bb3ad8b3c..a2b66717813d 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref) static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500) { if (vcpu_e500->g2h_tlb1_map) - memset(vcpu_e500->g2h_tlb1_map, - sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0); + memset(vcpu_e500->g2h_tlb1_map, 0, + sizeof(u64) * vcpu_e500->gtlb_params[1].entries); if (vcpu_e500->h2g_tlb1_rmap) - memset(vcpu_e500->h2g_tlb1_rmap, - sizeof(unsigned int) * host_tlb_params[1].entries, 0); + memset(vcpu_e500->h2g_tlb1_rmap, 0, + sizeof(unsigned int) * host_tlb_params[1].entries); } static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) -- cgit v1.2.3 From ca08649eb5dd30f11a5a8fe8659b48899b7ea6a1 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 16 Aug 2012 11:31:27 -0400 Subject: Revert "xen PVonHVM: move shared_info to MMIO before kexec" This reverts commit 00e37bdb0113a98408de42db85be002f21dbffd3. During shutdown of PVHVM guests with more than 2VCPUs on certain machines we can hit the race where the replaced shared_info is not replaced fast enough and the PV time clock retries reading the same area over and over without any any success and is stuck in an infinite loop. Acked-by: Olaf Hering Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 118 +++++---------------------------------------- arch/x86/xen/suspend.c | 2 +- arch/x86/xen/xen-ops.h | 2 +- drivers/xen/platform-pci.c | 15 ------ include/xen/events.h | 2 - 5 files changed, 13 insertions(+), 126 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a6f8acbdfc9a..f1814fc2cb77 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include @@ -1472,130 +1471,38 @@ asmlinkage void __init xen_start_kernel(void) #endif } -#ifdef CONFIG_XEN_PVHVM -/* - * The pfn containing the shared_info is located somewhere in RAM. This - * will cause trouble if the current kernel is doing a kexec boot into a - * new kernel. The new kernel (and its startup code) can not know where - * the pfn is, so it can not reserve the page. The hypervisor will - * continue to update the pfn, and as a result memory corruption occours - * in the new kernel. - * - * One way to work around this issue is to allocate a page in the - * xen-platform pci device's BAR memory range. But pci init is done very - * late and the shared_info page is already in use very early to read - * the pvclock. So moving the pfn from RAM to MMIO is racy because some - * code paths on other vcpus could access the pfn during the small - * window when the old pfn is moved to the new pfn. There is even a - * small window were the old pfn is not backed by a mfn, and during that - * time all reads return -1. - * - * Because it is not known upfront where the MMIO region is located it - * can not be used right from the start in xen_hvm_init_shared_info. - * - * To minimise trouble the move of the pfn is done shortly before kexec. - * This does not eliminate the race because all vcpus are still online - * when the syscore_ops will be called. But hopefully there is no work - * pending at this point in time. Also the syscore_op is run last which - * reduces the risk further. - */ - -static struct shared_info *xen_hvm_shared_info; - -static void xen_hvm_connect_shared_info(unsigned long pfn) +void __ref xen_hvm_init_shared_info(void) { + int cpu; struct xen_add_to_physmap xatp; + static struct shared_info *shared_info_page = 0; + if (!shared_info_page) + shared_info_page = (struct shared_info *) + extend_brk(PAGE_SIZE, PAGE_SIZE); xatp.domid = DOMID_SELF; xatp.idx = 0; xatp.space = XENMAPSPACE_shared_info; - xatp.gpfn = pfn; + xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) BUG(); -} -static void xen_hvm_set_shared_info(struct shared_info *sip) -{ - int cpu; - - HYPERVISOR_shared_info = sip; + HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock * related functions. We don't need the vcpu_info placement * optimizations because we don't use any pv_mmu or pv_irq op on * HVM. - * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is - * online but xen_hvm_set_shared_info is run at resume time too and + * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is + * online but xen_hvm_init_shared_info is run at resume time too and * in that case multiple vcpus might be online. */ for_each_online_cpu(cpu) { per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; } } -/* Reconnect the shared_info pfn to a mfn */ -void xen_hvm_resume_shared_info(void) -{ - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); -} - -#ifdef CONFIG_KEXEC -static struct shared_info *xen_hvm_shared_info_kexec; -static unsigned long xen_hvm_shared_info_pfn_kexec; - -/* Remember a pfn in MMIO space for kexec reboot */ -void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn) -{ - xen_hvm_shared_info_kexec = sip; - xen_hvm_shared_info_pfn_kexec = pfn; -} - -static void xen_hvm_syscore_shutdown(void) -{ - struct xen_memory_reservation reservation = { - .domid = DOMID_SELF, - .nr_extents = 1, - }; - unsigned long prev_pfn; - int rc; - - if (!xen_hvm_shared_info_kexec) - return; - - prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT; - set_xen_guest_handle(reservation.extent_start, &prev_pfn); - - /* Move pfn to MMIO, disconnects previous pfn from mfn */ - xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec); - - /* Update pointers, following hypercall is also a memory barrier */ - xen_hvm_set_shared_info(xen_hvm_shared_info_kexec); - - /* Allocate new mfn for previous pfn */ - do { - rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation); - if (rc == 0) - msleep(123); - } while (rc == 0); - - /* Make sure the previous pfn is really connected to a (new) mfn */ - BUG_ON(rc != 1); -} - -static struct syscore_ops xen_hvm_syscore_ops = { - .shutdown = xen_hvm_syscore_shutdown, -}; -#endif - -/* Use a pfn in RAM, may move to MMIO before kexec. */ -static void __init xen_hvm_init_shared_info(void) -{ - /* Remember pointer for resume */ - xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE); - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); - xen_hvm_set_shared_info(xen_hvm_shared_info); -} - +#ifdef CONFIG_XEN_PVHVM static void __init init_hvm_pv_info(void) { int major, minor; @@ -1646,9 +1553,6 @@ static void __init xen_hvm_guest_init(void) init_hvm_pv_info(); xen_hvm_init_shared_info(); -#ifdef CONFIG_KEXEC - register_syscore_ops(&xen_hvm_syscore_ops); -#endif if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index ae8a00c39de4..45329c8c226e 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -30,7 +30,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; - xen_hvm_resume_shared_info(); + xen_hvm_init_shared_info(); xen_callback_vector(); xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 1e4329e04e0f..202d4c150154 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -41,7 +41,7 @@ void xen_enable_syscall(void); void xen_vcpu_restore(void); void xen_callback_vector(void); -void xen_hvm_resume_shared_info(void); +void xen_hvm_init_shared_info(void); void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index d4c50d63acbc..97ca359ae2bd 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -101,19 +101,6 @@ static int platform_pci_resume(struct pci_dev *pdev) return 0; } -static void __devinit prepare_shared_info(void) -{ -#ifdef CONFIG_KEXEC - unsigned long addr; - struct shared_info *hvm_shared_info; - - addr = alloc_xen_mmio(PAGE_SIZE); - hvm_shared_info = ioremap(addr, PAGE_SIZE); - memset(hvm_shared_info, 0, PAGE_SIZE); - xen_hvm_prepare_kexec(hvm_shared_info, addr >> PAGE_SHIFT); -#endif -} - static int __devinit platform_pci_init(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -151,8 +138,6 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, platform_mmio = mmio_addr; platform_mmiolen = mmio_len; - prepare_shared_info(); - if (!xen_have_vector_callback) { ret = xen_allocate_irq(pdev); if (ret) { diff --git a/include/xen/events.h b/include/xen/events.h index 9c641deb65d2..04399b28e821 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -58,8 +58,6 @@ void notify_remote_via_irq(int irq); void xen_irq_resume(void); -void xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn); - /* Clear an irq's pending state, in preparation for polling on it */ void xen_clear_irq_pending(int irq); void xen_set_irq_pending(int irq); -- cgit v1.2.3 From e7d6582e04212943d23d6e42b86ede5d9a0ebe04 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 3 Aug 2012 16:08:36 +1000 Subject: m68knommu: select CONFIG_HAVE_CLK for ColdFire CPU types The ColdFire CPU sub-arch has kernel clk code support, so select CONFIG_HAVE_CLK. Signed-off-by: Greg Ungerer --- arch/m68k/Kconfig.cpu | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 82068349a2bb..59eb9f359809 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -28,6 +28,7 @@ config COLDFIRE select CPU_HAS_NO_BITFIELDS select CPU_HAS_NO_MULDIV64 select GENERIC_CSUM + select HAVE_CLK endchoice -- cgit v1.2.3 From 42b1b94635a467407841c89e91d9209c55f6bc61 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 14 Aug 2012 14:31:33 +1000 Subject: m68k: select CONFIG_GENERIC_ATOMIC64 for all m68k CPU types There is no specific atomic64 support code for any m68k CPUs, so we should select CONFIG_GENERIC_ATOMC64 for all. Remove the existing per CPU selection of this and select it for all m68k. Signed-off-by: Greg Ungerer Acked-by: Fengguang Wu Acked-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 + arch/m68k/Kconfig.cpu | 4 ---- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 4a469907f04a..b22df9410dce 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW + select GENERIC_ATOMIC64 select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES select GENERIC_STRNCPY_FROM_USER if MMU diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 59eb9f359809..c4eb79edecec 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -59,7 +59,6 @@ config MCPU32 config M68020 bool "68020 support" depends on MMU - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68020 @@ -70,7 +69,6 @@ config M68020 config M68030 bool "68030 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68030 @@ -80,7 +78,6 @@ config M68030 config M68040 bool "68040 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68LC040 @@ -91,7 +88,6 @@ config M68040 config M68060 bool "68060 support" depends on MMU && !MMU_SUN3 - select GENERIC_ATOMIC64 select CPU_HAS_ADDRESS_SPACES help If you anticipate running this kernel on a computer with a MC68060 -- cgit v1.2.3 From 16339464c5d67d0536837fc5342c9c2432b80ae0 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 15 Aug 2012 12:00:16 +0200 Subject: ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path The ldb_di[01]_podf is implemented as a clk-divider that divides by 1 or 2. In reality, the ldb_di[01]_ipu_div dividers divide by either 3.5 or 7. Adding a fixed factor of 1/3.5 fixes their children's clock rates. This should probably be converted to rate table based dividers, once available. Cc: Signed-off-by: Philipp Zabel Signed-off-by: Steffen Trumtrar Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e22..4233d9e3531d 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); -- cgit v1.2.3 From 87161ccdc61862c8b49e75c21209d7f79dc758e9 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 10 Aug 2012 16:00:31 -0700 Subject: MIPS: Octeon: Fix broken interrupt controller code. Since 3.6.0-rc1, We are getting many messages like: WARNING: at kernel/irq/irqdomain.c:444 irq_domain_associate_many+0x23c/0x260() Modules linked in: Call Trace: [] dump_stack+0x8/0x34 [] warn_slowpath_common+0x78/0xa8 [] irq_domain_associate_many+0x23c/0x260 [] irq_create_mapping+0xd0/0x220 [] irq_create_of_mapping+0x7c/0x158 [] irq_of_parse_and_map+0x28/0x40 . . . Both the CIU and GPIO interrupt domains were somewhat screwed up. For the CIU domain, we need to call irq_domain_associate() for each of the preassigned irq numbers. For the GPIO domain, we were applying the register bit offset in octeon_irq_gpio_xlat, but it should be done in octeon_irq_gpio_map instead. Also: Reserve all 8 'core' irqs for the 'core' irq_chip so that they don't get used by the other domains. Remove unused OCTEON_IRQ_* symbols. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4190/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-irq.c | 89 +++++++++++++------------- arch/mips/include/asm/mach-cavium-octeon/irq.h | 10 +-- 2 files changed, 44 insertions(+), 55 deletions(-) (limited to 'arch') diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 7fb1f222b8a5..274cd4fad30c 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit, octeon_irq_ciu_to_irq[line][bit] = irq; } +static void octeon_irq_force_ciu_mapping(struct irq_domain *domain, + int irq, int line, int bit) +{ + irq_domain_associate(domain, irq, line << 6 | bit); +} + static int octeon_coreid_for_cpu(int cpu) { #ifdef CONFIG_SMP @@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void) mutex_init(&cd->core_irq_mutex); irq = OCTEON_IRQ_SW0 + i; - switch (irq) { - case OCTEON_IRQ_TIMER: - case OCTEON_IRQ_SW0: - case OCTEON_IRQ_SW1: - case OCTEON_IRQ_5: - case OCTEON_IRQ_PERF: - irq_set_chip_data(irq, cd); - irq_set_chip_and_handler(irq, &octeon_irq_chip_core, - handle_percpu_irq); - break; - default: - break; - } + irq_set_chip_data(irq, cd); + irq_set_chip_and_handler(irq, &octeon_irq_chip_core, + handle_percpu_irq); } } @@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, unsigned int type; unsigned int pin; unsigned int trigger; - struct octeon_irq_gpio_domain_data *gpiod; if (d->of_node != node) return -EINVAL; @@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, break; } *out_type = type; - gpiod = d->host_data; - *out_hwirq = gpiod->base_hwirq + pin; + *out_hwirq = pin; return 0; } @@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d, static int octeon_irq_gpio_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw) { - unsigned int line = hw >> 6; - unsigned int bit = hw & 63; + struct octeon_irq_gpio_domain_data *gpiod = d->host_data; + unsigned int line, bit; if (!octeon_irq_virq_in_range(virq)) return -EINVAL; + hw += gpiod->base_hwirq; + line = hw >> 6; + bit = hw & 63; if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; octeon_irq_set_ciu_mapping(virq, line, bit, octeon_irq_gpio_chip, octeon_irq_handle_gpio); - return 0; } @@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void) struct irq_chip *chip_wd; struct device_node *gpio_node; struct device_node *ciu_node; + struct irq_domain *ciu_domain = NULL; octeon_irq_init_ciu_percpu(); octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu; @@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void) /* Mips internal */ octeon_irq_init_core(); - /* CIU_0 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); - - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq); - - /* CIU_1 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq); - gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio"); if (gpio_node) { struct octeon_irq_gpio_domain_data *gpiod; @@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void) ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu"); if (ciu_node) { - irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); + ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); of_node_put(ciu_node); } else - pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n"); + panic("Cannot find device node for cavium,octeon-3860-ciu."); + + /* CIU_0 */ + for (i = 0; i < 16; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0); + + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); + + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56); + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63); + + /* CIU_1 */ + for (i = 0; i < 16; i++) + octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17); /* Enable the CIU lines */ set_c0_status(STATUSF_IP3 | STATUSF_IP2); diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h index 418992042f6f..c22a3078bf11 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/irq.h +++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h @@ -21,14 +21,10 @@ enum octeon_irq { OCTEON_IRQ_TIMER, /* sources in CIU_INTX_EN0 */ OCTEON_IRQ_WORKQ0, - OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16, - OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16, + OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16, OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15, OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16, OCTEON_IRQ_MBOX1, - OCTEON_IRQ_UART0, - OCTEON_IRQ_UART1, - OCTEON_IRQ_UART2, OCTEON_IRQ_PCI_INT0, OCTEON_IRQ_PCI_INT1, OCTEON_IRQ_PCI_INT2, @@ -38,8 +34,6 @@ enum octeon_irq { OCTEON_IRQ_PCI_MSI2, OCTEON_IRQ_PCI_MSI3, - OCTEON_IRQ_TWSI, - OCTEON_IRQ_TWSI2, OCTEON_IRQ_RML, OCTEON_IRQ_TIMER0, OCTEON_IRQ_TIMER1, @@ -47,8 +41,6 @@ enum octeon_irq { OCTEON_IRQ_TIMER3, OCTEON_IRQ_USB0, OCTEON_IRQ_USB1, - OCTEON_IRQ_MII0, - OCTEON_IRQ_MII1, OCTEON_IRQ_BOOTDMA, #ifndef CONFIG_PCI_MSI OCTEON_IRQ_LAST = 127 -- cgit v1.2.3 From b4da14abf27227fc767ec257f44de70085a0bc68 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:24 +0200 Subject: MIPS: ath79: Fix number of GPIO lines for AR724[12] The AR724[12] SoCs have more GPIO lines than the AR7240. Signed-off-by: Gabor Juhos Cc: Cc: linux-mips@linux-mips.org Patchwork: https://http://patchwork.linux-mips.org/patch/4167/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/gpio.c | 6 ++++-- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index 29054f211832..48fe762d2526 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) if (soc_is_ar71xx()) ath79_gpio_count = AR71XX_GPIO_COUNT; - else if (soc_is_ar724x()) - ath79_gpio_count = AR724X_GPIO_COUNT; + else if (soc_is_ar7240()) + ath79_gpio_count = AR7240_GPIO_COUNT; + else if (soc_is_ar7241() || soc_is_ar7242()) + ath79_gpio_count = AR7241_GPIO_COUNT; else if (soc_is_ar913x()) ath79_gpio_count = AR913X_GPIO_COUNT; else if (soc_is_ar933x()) diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index 1caa78ad06d5..dde504477fac 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -393,7 +393,8 @@ #define AR71XX_GPIO_REG_FUNC 0x28 #define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 +#define AR7240_GPIO_COUNT 18 +#define AR7241_GPIO_COUNT 20 #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 -- cgit v1.2.3 From 5fb234560eb3033b35812cd0d80613dbf37dca2f Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:25 +0200 Subject: MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 The currently assigned IRQ number to the OHCI controller is incorrect for the AR7240 SoC, and that leads to the following error message from the OHCI driver: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ath79-ohci ath79-ohci: Atheros built-in OHCI controller ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 1 ath79-ohci ath79-ohci: irq 14, io mem 0x1b000000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb 1-1: new full-speed USB device number 2 using ath79-ohci ath79-ohci ath79-ohci: Unlink after no-IRQ? Controller is probably using the wrong IRQ. Fix this by using the correct IRQ number. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4168/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/dev-usb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index 36e9570e7bc4..b2a2311ec85b 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void) ath79_ohci_resources[0].start = AR7240_OHCI_BASE; ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; + ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; platform_device_register(&ath79_ohci_device); } -- cgit v1.2.3 From 946380676396e633878d07ecb23c9144fbb44abc Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 4 Aug 2012 18:01:26 +0200 Subject: MIPS: ath79: select HAVE_CLK It is needed in order to get rid of the following errors: arch/mips/ath79/clock.c:353:13: error: redefinition of 'clk_get' include/linux/clk.h:281:27: note: previous definition of 'clk_get' was here arch/mips/ath79/clock.c:377:5: error: redefinition of 'clk_enable' include/linux/clk.h:295:19: note: previous definition of 'clk_enable' was here arch/mips/ath79/clock.c:383:6: error: redefinition of 'clk_disable' include/linux/clk.h:300:20: note: previous definition of 'clk_disable' was here arch/mips/ath79/clock.c:388:15: error: redefinition of 'clk_get_rate' include/linux/clk.h:302:29: note: previous definition of 'clk_get_rate' was here arch/mips/ath79/clock.c:394:6: error: redefinition of 'clk_put' include/linux/clk.h:291:20: note: previous definition of 'clk_put' was here Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4170/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574df99c..faf65286574e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -89,6 +89,7 @@ config ATH79 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select HAVE_CLK select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 -- cgit v1.2.3 From 143ec74eb10ac9a8c4357341a03b07ac4f04a761 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 12 Jul 2012 21:54:05 +0100 Subject: MIPS: MTX-1: Add udelay to mtx1_pci_idsel Without this udelay(1) PCI idsel does not work correctly on the "singleboard" (T-Mobile Surfbox) for the MiniPCI device. The result is that PCI configuration fails and the MiniPCI card is not detected correctly. Instead of PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x4000ffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40010000-0x40010fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40011000-0x40011fff] We see only the CardBus device: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x40000fff] pci 0000:00:00.1: BAR 0: assigned [mem 0x40001000-0x40001fff] Later the device driver shows this error: ath5k 0000:00:03.0: cannot remap PCI memory region ath5k: probe of 0000:00:03.0 failed with error -5 I assume that the logic chip which usually supresses the signal to the CardBus card has some settling time and without the delay it would still let the Cardbus interfere with the response from the MiniPCI card. What I cannot explain is why this behaviour shows up now and not in earlier kernel versions before. Maybe older PCI code was slower? Signed-off-by: Bruno Randolf Cc: linux-mips@linux-mips.org Cc: manuel.lauss@googlemail.com Cc: florian@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/4087/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/board-mtx1.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 99969484c475..a124c251c0c9 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert) * adapter on the mtx-1 "singleboard" variant. It triggers a custom * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. */ + udelay(1); + if (assert && devsel != 0) /* Suppress signal to Cardbus */ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ -- cgit v1.2.3 From d3cac35cd0a2a987f7559e1829fb0253cea33872 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Aug 2012 14:57:03 +0200 Subject: MIPS: Fix memory leak in error path of HI16/LO16 relocation handling. Commit 6f5d2e970452b5c86906adcb8e7ad246f535ba39 (lmo) / 477c4b07406357ad93d0e32788dbf3ee814eadaa (kernel.org) [[MIPS: VPE: Free relocation chain on error.] fixed the same issue in the vpe loader in 2009 but back then the same bug in module.c went unfixed. Signed-off-by: Ralf Baechle Reported-by: Akhilesh Kumar --- arch/mips/kernel/module.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index a5066b1c3de3..e5f2f56524ea 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -146,16 +146,15 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; Elf_Addr val, vallo; + struct mips_hi16 *l, *next; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (mips_hi16_list != NULL) { - struct mips_hi16 *l; l = mips_hi16_list; while (l != NULL) { - struct mips_hi16 *next; unsigned long insn; /* @@ -201,6 +200,12 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: + while (l) { + next = l->next; + kfree(l); + l = next; + } + pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); return -ENOEXEC; -- cgit v1.2.3 From 861667dc82f561e65336ea67f73021b782b4ff74 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 8 Aug 2012 16:59:43 +0200 Subject: MIPS: Fix race condition in module relocation code. The relocation code was essentially taken from the 2.4 modutils which perform relocation in userspace. In 2.6 relocation of multiple modules may be performed in parallel by the in-kernel loader so the global variable mips_hi16_list won't fly anymore. Fix race by moving it into mod_arch_specific. [ralf@linux-mips.org: folded in Tony's followup fix. Thanks Tony!] Signed-off-by: Ralf Baechle Signed-off-by: Tony Wu Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/4189/ --- arch/mips/include/asm/module.h | 1 + arch/mips/kernel/module.c | 13 ++++++------- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index 7531ecd654d6..dca8bce8c7ab 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -10,6 +10,7 @@ struct mod_arch_specific { struct list_head dbe_list; const struct exception_table_entry *dbe_start; const struct exception_table_entry *dbe_end; + struct mips_hi16 *r_mips_hi16_list; }; typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index e5f2f56524ea..8e1fb802c3e2 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -39,8 +39,6 @@ struct mips_hi16 { Elf_Addr value; }; -static struct mips_hi16 *mips_hi16_list; - static LIST_HEAD(dbe_list); static DEFINE_SPINLOCK(dbe_lock); @@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) n->addr = (Elf_Addr *)location; n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; + n->next = me->arch.r_mips_hi16_list; + me->arch.r_mips_hi16_list = n; return 0; } @@ -151,9 +149,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - if (mips_hi16_list != NULL) { + if (me->arch.r_mips_hi16_list != NULL) { - l = mips_hi16_list; + l = me->arch.r_mips_hi16_list; while (l != NULL) { unsigned long insn; @@ -187,7 +185,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) l = next; } - mips_hi16_list = NULL; + me->arch.r_mips_hi16_list = NULL; } /* @@ -278,6 +276,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); + me->arch.r_mips_hi16_list = NULL; for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr -- cgit v1.2.3 From c54de490a2e4e74164f747925ff05c00dfa153cd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 14 Aug 2012 00:34:18 +0200 Subject: MIPS: Module: Deal with malformed HI16/LO16 relocation sequences. In case a series of R_MIPS_HI16 relocations was not followed by an R_MIPS_LO16 relocation we were leaking the hi16 relocation chain. Handle that error and return an error. Signed-off-by: Ralf Baechle --- arch/mips/kernel/module.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index 8e1fb802c3e2..4f8c3cba8c0c 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -140,19 +140,30 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) return 0; } +static void free_relocation_chain(struct mips_hi16 *l) +{ + struct mips_hi16 *next; + + while (l) { + next = l->next; + kfree(l); + l = next; + } +} + static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; + struct mips_hi16 *l; Elf_Addr val, vallo; - struct mips_hi16 *l, *next; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; if (me->arch.r_mips_hi16_list != NULL) { - l = me->arch.r_mips_hi16_list; while (l != NULL) { + struct mips_hi16 *next; unsigned long insn; /* @@ -198,11 +209,8 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: - while (l) { - next = l->next; - kfree(l); - l = next; - } + free_relocation_chain(l); + me->arch.r_mips_hi16_list = NULL; pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); @@ -300,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, return res; } + /* + * Normally the hi16 list should be deallocated at this point. A + * malformed binary however could contain a series of R_MIPS_HI16 + * relocations not followed by a R_MIPS_LO16 relocation. In that + * case, free up the list and return an error. + */ + if (me->arch.r_mips_hi16_list) { + free_relocation_chain(me->arch.r_mips_hi16_list); + me->arch.r_mips_hi16_list = NULL; + + return -ENOEXEC; + } + return 0; } -- cgit v1.2.3 From 5a6704454a68ab6e27e4fc5b82818a8c5733bf29 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 18 Jun 2012 12:07:51 +0200 Subject: MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348. BCM6338 and BCM6348 have a message control register width of 8 bits, instead of 16-bits like what the SPI driver assumes right now. Also the SPI message type shift value of 14 is actually 6 for these SoCs. This resulted in transmit FIFO corruption because we were writing 16-bits to an 8-bits wide register, thus spanning on the first byte of the transmit FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo(). Fix this by passing the message control register width and message type shift through platform data back to the SPI driver so that it can use it properly. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Cc: jonas.gorski@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/3983/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/dev-spi.c | 4 +++ .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 2 ++ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 13 ++++++--- drivers/spi/spi-bcm63xx.c | 31 ++++++++++++++++++---- 4 files changed, 42 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index e39f73048d4f..f1c9c3e2f678 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void) if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; } if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH; } bcm63xx_spi_regs_init(); diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h index 7d98dbe5d4b5..c9bae1362606 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h @@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void); struct bcm63xx_spi_pdata { unsigned int fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; int bus_num; int num_chipselect; u32 speed_hz; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 4ccc2a748aff..61f2a2a5099d 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -1054,7 +1054,8 @@ #define SPI_6338_FILL_BYTE 0x07 #define SPI_6338_MSG_TAIL 0x09 #define SPI_6338_RX_TAIL 0x0b -#define SPI_6338_MSG_CTL 0x40 +#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6338_MSG_CTL_WIDTH 8 #define SPI_6338_MSG_DATA 0x41 #define SPI_6338_MSG_DATA_SIZE 0x3f #define SPI_6338_RX_DATA 0x80 @@ -1070,7 +1071,8 @@ #define SPI_6348_FILL_BYTE 0x07 #define SPI_6348_MSG_TAIL 0x09 #define SPI_6348_RX_TAIL 0x0b -#define SPI_6348_MSG_CTL 0x40 +#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6348_MSG_CTL_WIDTH 8 #define SPI_6348_MSG_DATA 0x41 #define SPI_6348_MSG_DATA_SIZE 0x3f #define SPI_6348_RX_DATA 0x80 @@ -1078,6 +1080,7 @@ /* BCM 6358 SPI core */ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6358_MSG_CTL_WIDTH 16 #define SPI_6358_MSG_DATA 0x02 #define SPI_6358_MSG_DATA_SIZE 0x21e #define SPI_6358_RX_DATA 0x400 @@ -1094,6 +1097,7 @@ /* BCM 6358 SPI core */ #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6368_MSG_CTL_WIDTH 16 #define SPI_6368_MSG_DATA 0x02 #define SPI_6368_MSG_DATA_SIZE 0x21e #define SPI_6368_RX_DATA 0x400 @@ -1115,7 +1119,10 @@ #define SPI_HD_W 0x01 #define SPI_HD_R 0x02 #define SPI_BYTE_CNT_SHIFT 0 -#define SPI_MSG_TYPE_SHIFT 14 +#define SPI_6338_MSG_TYPE_SHIFT 6 +#define SPI_6348_MSG_TYPE_SHIFT 6 +#define SPI_6358_MSG_TYPE_SHIFT 14 +#define SPI_6368_MSG_TYPE_SHIFT 14 /* Command */ #define SPI_CMD_NOOP 0x00 diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 6e25ef1bce91..b7d61e7b8737 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -47,6 +47,8 @@ struct bcm63xx_spi { /* Platform data */ u32 speed_hz; unsigned fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; /* Data buffers */ const unsigned char *tx_ptr; @@ -221,13 +223,20 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); if (t->rx_buf && t->tx_buf) - msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); else if (t->rx_buf) - msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_HD_R << bs->msg_type_shift); else if (t->tx_buf) - msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); - - bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + msg_ctl |= (SPI_HD_W << bs->msg_type_shift); + + switch (bs->msg_ctl_width) { + case 8: + bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL); + break; + case 16: + bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + break; + } /* Issue the transfer */ cmd = SPI_CMD_START_IMMEDIATE; @@ -406,9 +415,21 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->transfer_one_message = bcm63xx_spi_transfer_one; master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; + bs->msg_type_shift = pdata->msg_type_shift; + bs->msg_ctl_width = pdata->msg_ctl_width; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); + switch (bs->msg_ctl_width) { + case 8: + case 16: + break; + default: + dev_err(dev, "unsupported MSG_CTL width: %d\n", + bs->msg_ctl_width); + goto out_clk_disable; + } + /* Initialize hardware */ clk_enable(bs->clk); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); -- cgit v1.2.3 From cf9bfe55f24973a8f40e2c922a7e82cf09e486fd Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Tue, 14 Aug 2012 18:56:13 +0530 Subject: MIPS: Synchronize MIPS count one CPU at a time The current implementation of synchronise_count_{master,slave} blocks slave CPUs in early boot until all of them come up. This no longer works because blocking a CPU with interrupts off after notifying the CPU to be online causes problems with the current kernel. Specifically, after the workqueue changes (commit a08489c569dc1 "Pull workqueue changes from Tejun Heo") the CPU_ONLINE notification callback workqueue_cpu_up_callback() will hang on wait_for_completion(&idle_rebind.done), if the slave CPUs are blocked for synchronize_count_slave(). The changes are to update synchronize_count_{master,slave}() to handle one CPU at a time and to call synchronise_count_master() in __cpu_up() so that the CPU_ONLINE notification goes out only after the COP0 COUNT register is synchronized. [ralf@linux-mips.org: This matter only to those few platforms which are using the cp0 counter as their clocksource which are XLP, XLR and MIPS' CMP solution.] Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4216/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/r4k-timer.h | 8 ++++---- arch/mips/kernel/smp.c | 4 ++-- arch/mips/kernel/sync-r4k.c | 26 +++++++++++--------------- 3 files changed, 17 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h index a37d12b3b61c..afe9e0e03fe9 100644 --- a/arch/mips/include/asm/r4k-timer.h +++ b/arch/mips/include/asm/r4k-timer.h @@ -12,16 +12,16 @@ #ifdef CONFIG_SYNC_R4K -extern void synchronise_count_master(void); -extern void synchronise_count_slave(void); +extern void synchronise_count_master(int cpu); +extern void synchronise_count_slave(int cpu); #else -static inline void synchronise_count_master(void) +static inline void synchronise_count_master(int cpu) { } -static inline void synchronise_count_slave(void) +static inline void synchronise_count_slave(int cpu) { } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 31637d8c8738..9005bf9fb859 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_set(cpu, cpu_callin_map); - synchronise_count_slave(); + synchronise_count_slave(cpu); /* * irq will be enabled in ->smp_finish(), enabling it too early @@ -173,7 +173,6 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { mp_ops->cpus_done(); - synchronise_count_master(); } /* called from main before smp_init() */ @@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); + synchronise_count_master(cpu); return 0; } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 842d55e411fd..7f1eca3858de 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __cpuinit synchronise_count_master(void) +void __cpuinit synchronise_count_master(int cpu) { int i; unsigned long flags; unsigned int initcount; - int nslaves; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void) return; #endif - printk(KERN_INFO "Synchronize counters across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu); local_irq_save(flags); @@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void) * Notify the slaves that it's time to start */ atomic_set(&count_reference, read_c0_count()); - atomic_set(&count_start_flag, 1); + atomic_set(&count_start_flag, cpu); smp_wmb(); /* Count will be initialised to current timer for all CPU's */ @@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void) * two CPUs. */ - nslaves = num_online_cpus()-1; for (i = 0; i < NR_LOOPS; i++) { - /* slaves loop on '!= ncpus' */ - while (atomic_read(&count_count_start) != nslaves) + /* slaves loop on '!= 2' */ + while (atomic_read(&count_count_start) != 1) mb(); atomic_set(&count_count_stop, 0); smp_wmb(); @@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void) /* * Wait for all slaves to leave the synchronization point: */ - while (atomic_read(&count_count_stop) != nslaves) + while (atomic_read(&count_count_stop) != 1) mb(); atomic_set(&count_count_start, 0); smp_wmb(); @@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); + atomic_set(&count_start_flag, 0); local_irq_restore(flags); @@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void) printk("done.\n"); } -void __cpuinit synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(int cpu) { int i; unsigned int initcount; - int ncpus; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void) * so we first wait for the master to say everyone is ready */ - while (!atomic_read(&count_start_flag)) + while (atomic_read(&count_start_flag) != cpu) mb(); /* Count will be initialised to next expire for all CPU's */ initcount = atomic_read(&count_reference); - ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { atomic_inc(&count_count_start); - while (atomic_read(&count_count_start) != ncpus) + while (atomic_read(&count_count_start) != 2) mb(); /* @@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void) write_c0_count(initcount); atomic_inc(&count_count_stop); - while (atomic_read(&count_count_stop) != ncpus) + while (atomic_read(&count_count_stop) != 2) mb(); } /* Arrange for an interrupt in a short while */ -- cgit v1.2.3 From 00dc5ce2a653a332190aa29b2e1f3bceaa7d5b8d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 14 Aug 2012 21:12:21 +0200 Subject: MIPS: ath79: don't hardcode the unavailability of the DSP ASE The ath79 platform code allows to run a single kernel image on various SoCs which are based on the 24Kc and 74Kc cores. The current code explicitely disables the DSP ASE, but that is available in the 74Kc core. Remove the override in order to let the kernel to detect the availability of the DSP ASE at runtime. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4222/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index 4476fa03bf36..6ddae926bf79 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -42,7 +42,6 @@ #define cpu_has_mips64r1 0 #define cpu_has_mips64r2 0 -#define cpu_has_dsp 0 #define cpu_has_mipsmt 0 #define cpu_has_64bits 0 -- cgit v1.2.3 From 16cc2cf642eb73978a3ebde66dc94d24d46b4798 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 17 Aug 2012 10:45:27 +0200 Subject: MIPS: Malta: Delete duplicate PCI fixup. 2ec8663f9c03a96f2c328c7c483603c31d62ad37 (lmo) rsp. 497e5ff03f58583ada469db8a1aa34eced9dd63e (kernel.org) [MIPS: Malta: Move PIIX4 PCI fixup to where it belongs.] attempted to move this PCI fixup but really only added it at it's new location without deleting the old instance. Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-pci.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch') diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index 284dea54faf5..2147cb34e705 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -252,16 +252,3 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } - -/* Enable PCI 2.1 compatibility in PIIX4 */ -static void __devinit quirk_dlcsetup(struct pci_dev *dev) -{ - u8 odlc, ndlc; - (void) pci_read_config_byte(dev, 0x82, &odlc); - /* Enable passive releases and delayed transaction */ - ndlc = odlc | 7; - (void) pci_write_config_byte(dev, 0x82, ndlc); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - quirk_dlcsetup); -- cgit v1.2.3 From 97f50c6c415d84c612094d9514a3df3d70ab30e3 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 16:47:27 +0100 Subject: ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500' The platform attempts to register platform device 'snd_soc_u8500' which doesn't actually exist. Here we change the reference to the correct one 'snd_soc_mop500'. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-msp.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 996048038743..df15646036aa 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, -- cgit v1.2.3 From 46a8b9837da20206c6daca11949485fab7b6e875 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 16:47:28 +0100 Subject: ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled Previous attempts to add platform probing of the Audio related devices only call from non-DT initialisation functions. This patch extends that functionality to the Device Tree related ones too. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1c..a534d8880de1 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; -- cgit v1.2.3 From 250a41e0ecc433cdd553a364d0fc74c766425209 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Aug 2012 09:27:35 -0400 Subject: xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID. If P2M leaf is completly packed with INVALID_P2M_ENTRY or with 1:1 PFNs (so IDENTITY_FRAME type PFNs), we can swap the P2M leaf with either a p2m_missing or p2m_identity respectively. The old page (which was created via extend_brk or was grafted on from the mfn_list) can be re-used for setting new PFNs. This also means we can remove git commit: 5bc6f9888db5739abfa0cae279b4b442e4db8049 xen/p2m: Reserve 8MB of _brk space for P2M leafs when populating back which tried to fix this. and make the amount that is required to be reserved much smaller. CC: stable@vger.kernel.org # for 3.5 only. Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 95 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 92 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index b2e91d40a4cb..d4b255463253 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -196,9 +196,11 @@ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); /* When we populate back during bootup, the amount of pages can vary. The * max we have is seen is 395979, but that does not mean it can't be more. - * But some machines can have 3GB I/O holes even. So lets reserve enough - * for 4GB of I/O and E820 holes. */ -RESERVE_BRK(p2m_populated, PMD_SIZE * 4); + * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle + * it can re-use Xen provided mfn_list array, so we only need to allocate at + * most three P2M top nodes. */ +RESERVE_BRK(p2m_populated, PAGE_SIZE * 3); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); @@ -575,12 +577,99 @@ static bool __init early_alloc_p2m(unsigned long pfn) } return true; } + +/* + * Skim over the P2M tree looking at pages that are either filled with + * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and + * replace the P2M leaf with a p2m_missing or p2m_identity. + * Stick the old page in the new P2M tree location. + */ +bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn) +{ + unsigned topidx; + unsigned mididx; + unsigned ident_pfns; + unsigned inv_pfns; + unsigned long *p2m; + unsigned long *mid_mfn_p; + unsigned idx; + unsigned long pfn; + + /* We only look when this entails a P2M middle layer */ + if (p2m_index(set_pfn)) + return false; + + for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + topidx = p2m_top_index(pfn); + + if (!p2m_top[topidx]) + continue; + + if (p2m_top[topidx] == p2m_mid_missing) + continue; + + mididx = p2m_mid_index(pfn); + p2m = p2m_top[topidx][mididx]; + if (!p2m) + continue; + + if ((p2m == p2m_missing) || (p2m == p2m_identity)) + continue; + + if ((unsigned long)p2m == INVALID_P2M_ENTRY) + continue; + + ident_pfns = 0; + inv_pfns = 0; + for (idx = 0; idx < P2M_PER_PAGE; idx++) { + /* IDENTITY_PFNs are 1:1 */ + if (p2m[idx] == IDENTITY_FRAME(pfn + idx)) + ident_pfns++; + else if (p2m[idx] == INVALID_P2M_ENTRY) + inv_pfns++; + else + break; + } + if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE)) + goto found; + } + return false; +found: + /* Found one, replace old with p2m_identity or p2m_missing */ + p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing); + /* And the other for save/restore.. */ + mid_mfn_p = p2m_top_mfn_p[topidx]; + /* NOTE: Even if it is a p2m_identity it should still be point to + * a page filled with INVALID_P2M_ENTRY entries. */ + mid_mfn_p[mididx] = virt_to_mfn(p2m_missing); + + /* Reset where we want to stick the old page in. */ + topidx = p2m_top_index(set_pfn); + mididx = p2m_mid_index(set_pfn); + + /* This shouldn't happen */ + if (WARN_ON(p2m_top[topidx] == p2m_mid_missing)) + early_alloc_p2m(set_pfn); + + if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing)) + return false; + + p2m_init(p2m); + p2m_top[topidx][mididx] = p2m; + mid_mfn_p = p2m_top_mfn_p[topidx]; + mid_mfn_p[mididx] = virt_to_mfn(p2m); + + return true; +} bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) { if (unlikely(!__set_phys_to_machine(pfn, mfn))) { if (!early_alloc_p2m(pfn)) return false; + if (early_can_reuse_p2m_middle(pfn, mfn)) + return __set_phys_to_machine(pfn, mfn); + if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/)) return false; -- cgit v1.2.3 From 515c7af85ed92696c311c53d53cb4898ff32d784 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 18 Aug 2012 16:11:37 -0400 Subject: x32: Use compat shims for {g,s}etsockopt Some of the arguments to {g,s}etsockopt are passed in userland pointers. If we try to use the 64bit entry point, we end up sometimes failing. For example, dhcpcd doesn't run in x32: # dhcpcd eth0 dhcpcd[1979]: version 5.5.6 starting dhcpcd[1979]: eth0: broadcasting for a lease dhcpcd[1979]: eth0: open_socket: Invalid argument dhcpcd[1979]: eth0: send_raw_packet: Bad file descriptor The code in particular is getting back EINVAL when doing: struct sock_fprog pf; setsockopt(s, SOL_SOCKET, SO_ATTACH_FILTER, &pf, sizeof(pf)); Diving into the kernel code, we can see: include/linux/filter.h: struct sock_fprog { unsigned short len; struct sock_filter __user *filter; }; net/core/sock.c: case SO_ATTACH_FILTER: ret = -EINVAL; if (optlen == sizeof(struct sock_fprog)) { struct sock_fprog fprog; ret = -EFAULT; if (copy_from_user(&fprog, optval, sizeof(fprog))) break; ret = sk_attach_filter(&fprog, sk); } break; arch/x86/syscalls/syscall_64.tbl: 54 common setsockopt sys_setsockopt 55 common getsockopt sys_getsockopt So for x64, sizeof(sock_fprog) is 16 bytes. For x86/x32, it's 8 bytes. This comes down to the pointer being 32bit for x32, which means we need to do structure size translation. But since x32 comes in directly to sys_setsockopt, it doesn't get translated like x86. After changing the syscall table and rebuilding glibc with the new kernel headers, dhcp runs fine in an x32 userland. Oddly, it seems like Linus noted the same thing during the initial port, but I guess that was missed/lost along the way: https://lkml.org/lkml/2011/8/26/452 [ hpa: tagging for -stable since this is an ABI fix. ] Bugzilla: https://bugs.gentoo.org/423649 Reported-by: Mads Signed-off-by: Mike Frysinger Link: http://lkml.kernel.org/r/1345320697-15713-1-git-send-email-vapier@gentoo.org Cc: H. J. Lu Cc: v3.4..v3.5 Signed-off-by: H. Peter Anvin --- arch/x86/syscalls/syscall_64.tbl | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 29aed7ac2c02..a582bfed95bb 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -60,8 +60,8 @@ 51 common getsockname sys_getsockname 52 common getpeername sys_getpeername 53 common socketpair sys_socketpair -54 common setsockopt sys_setsockopt -55 common getsockopt sys_getsockopt +54 64 setsockopt sys_setsockopt +55 64 getsockopt sys_getsockopt 56 common clone stub_clone 57 common fork stub_fork 58 common vfork stub_vfork @@ -353,3 +353,5 @@ 538 x32 sendmmsg compat_sys_sendmmsg 539 x32 process_vm_readv compat_sys_process_vm_readv 540 x32 process_vm_writev compat_sys_process_vm_writev +541 x32 setsockopt compat_sys_setsockopt +542 x32 getsockopt compat_sys_getsockopt -- cgit v1.2.3 From a2fa3ccd7b43665fe14cb562761a6c3d26a1d13f Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:56 +1200 Subject: alpha: Don't export SOCK_NONBLOCK to user space. Currently we export SOCK_NONBLOCK to user space but that conflicts with the definition from glibc leading to compilation errors in user programs (e.g. see Debian bug #658460). The generic socket.h restricts the definition of SOCK_NONBLOCK to the kernel, as does the MIPS specific socket.h, so let's do the same on Alpha. Signed-off-by: Michael Cree Acked-by: Matt Turner Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/socket.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a4b5be..7d2f75be932e 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ -- cgit v1.2.3 From d8d5da129857bfd54b603771fca5409062167392 Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:57 +1200 Subject: alpha: Wire up cross memory attach syscalls Add sys_process_vm_readv and sys_process_vm_writev to Alpha. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/unistd.h | 4 +++- arch/alpha/kernel/systbls.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b0664a..a31a78eac9b9 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 87835235f114..b64157c98e02 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object -- cgit v1.2.3 From f2db633d301b4b50f5f93de0e8314cc81e9bc7de Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:40:58 +1200 Subject: alpha: Use new generic strncpy_from_user() and strnlen_user() Similar to x86/sparc/powerpc implementations except: 1) we implement an extremely efficient has_zero()/find_zero() sequence with both prep_zero_mask() and create_zero_mask() no-operations. 2) Our output from prep_zero_mask() differs in that only the lowest eight bits are used to represent the zero bytes nevertheless it can be safely ORed with other similar masks from prep_zero_mask() and forms input to create_zero_mask(), the two fundamental properties prep_zero_mask() must satisfy. Tests on EV67 and EV68 CPUs revealed that the generic code is essentially as fast (to within 0.5% of CPU cycles) of the old Alpha specific code for large quadword-aligned strings, despite the 30% extra CPU instructions executed. In contrast, the generic code for unaligned strings is substantially slower (by more than a factor of 3) than the old Alpha specific code. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/Kconfig | 2 + arch/alpha/include/asm/uaccess.h | 34 +-- arch/alpha/include/asm/word-at-a-time.h | 55 +++++ arch/alpha/kernel/alpha_ksyms.c | 2 - arch/alpha/lib/Makefile | 2 - arch/alpha/lib/ev6-strncpy_from_user.S | 424 -------------------------------- arch/alpha/lib/ev67-strlen_user.S | 107 -------- arch/alpha/lib/strlen_user.S | 91 ------- arch/alpha/lib/strncpy_from_user.S | 339 ------------------------- 9 files changed, 62 insertions(+), 994 deletions(-) create mode 100644 arch/alpha/include/asm/word-at-a-time.h delete mode 100644 arch/alpha/lib/ev6-strncpy_from_user.S delete mode 100644 arch/alpha/lib/ev67-strlen_user.S delete mode 100644 arch/alpha/lib/strlen_user.S delete mode 100644 arch/alpha/lib/strncpy_from_user.S (limited to 'arch') diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e645cc..9944dedee5b1 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f8d6e3..766fdfde2b7a 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 000000000000..6b340d0f1521 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742d4dc2..a354277bbaa7 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -74,8 +74,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab62b78..59660743237c 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e28178cacc..000000000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77b81a6..000000000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e96479..000000000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee21160ff7..000000000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user -- cgit v1.2.3 From be53db6e4edd9dc013b21a929ad2b142dea8b9c0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Aug 2012 14:40:59 +1200 Subject: alpha: take a bunch of syscalls into osf_sys.c New helper: current_thread_info(). Allows to do a bunch of odd syscalls in C. While we are at it, there had never been a reason to do osf_getpriority() in assembler. We also get "namespace"-aware (read: consistent with getuid(2), etc.) behaviour from getx?id() syscalls now. Signed-off-by: Al Viro Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/ptrace.h | 5 +- arch/alpha/kernel/entry.S | 109 ---------------------------------------- arch/alpha/kernel/osf_sys.c | 49 ++++++++++++++++++ arch/alpha/kernel/systbls.S | 2 +- kernel/timer.c | 9 ---- 5 files changed, 54 insertions(+), 120 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a174f26..b87755a19554 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159cee5f2f..22b0c4d414a7 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -796,115 +796,6 @@ sys_rt_sigreturn: br ret_from_sys_call .end sys_rt_sigreturn - .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - .align 4 .globl sys_execve .ent sys_execve diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a103621af6..bc1acdda7a5e 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1404,3 +1404,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index b64157c98e02..2ac6b45c3e00 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn diff --git a/kernel/timer.c b/kernel/timer.c index a61c09374eba..8c5e7b908c68 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1407,13 +1407,6 @@ SYSCALL_DEFINE1(alarm, unsigned int, seconds) #endif -#ifndef __alpha__ - -/* - * The Alpha uses getxpid, getxuid, and getxgid instead. Maybe this - * should be moved into arch/i386 instead? - */ - /** * sys_getpid - return the thread group id of the current process * @@ -1469,8 +1462,6 @@ SYSCALL_DEFINE0(getegid) return from_kgid_munged(current_user_ns(), current_egid()); } -#endif - static void process_timeout(unsigned long __data) { wake_up_process((struct task_struct *)__data); -- cgit v1.2.3 From 28d353d9891c28496e366bebe4e65233f59ad1f6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 19 Aug 2012 14:41:00 +1200 Subject: alpha: take kernel_execve() out of entry.S Signed-off-by: Al Viro Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/kernel/alpha_ksyms.c | 1 - arch/alpha/kernel/entry.S | 52 ----------------------------------------- arch/alpha/kernel/process.c | 19 +++++++++++++++ 3 files changed, 19 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index a354277bbaa7..15fa821d09cd 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 22b0c4d414a7..ec0da0567ab5 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fce3e8e..d6fde98b74b3 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -455,3 +455,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); -- cgit v1.2.3 From 0bcc426b1defa6b629dfa722537cab38876a3ce4 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Sun, 19 Aug 2012 14:41:01 +1200 Subject: alpha/mm/fault.c: Port OOM changes to do_page_fault Commit d065bd810b6d ("mm: retry page fault when blocking on disk transfer") and 37b23e0525d3 ("x86,mm: make pagefault killable") introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to ALPHA. Signed-off-by: Mohd. Faris Signed-off-by: Kautuk Consul Acked-by: Matt Turner Signed-off-by: Michael Cree Signed-off-by: Linus Torvalds --- arch/alpha/mm/fault.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1a84ef..0c4132dd3507 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; -- cgit v1.2.3 From 0be421862b857e61964435ffcaa7499cf77a5e5a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 19 Aug 2012 14:41:02 +1200 Subject: alpha: fix fpu.h usage in userspace After commit ec2212088c42 ("Disintegrate asm/system.h for Alpha"), the fpu.h header which we install for userland started depending on special_insns.h which is not installed. However, fpu.h only uses that for __KERNEL__ code, so protect the inclusion the same way to avoid build breakage in glibc: /usr/include/asm/fpu.h:4:31: fatal error: asm/special_insns.h: No such file or directory Cc: stable@vger.kernel.org Reported-by: Matt Turner Signed-off-by: Mike Frysinger Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/fpu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f7885faa..e477bcd5b94a 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include +#endif /* * Alpha floating-point control register defines: -- cgit v1.2.3 From 67a806d9499353fabd5b5ff07337f3aa88a1c3ba Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Sun, 19 Aug 2012 14:41:03 +1200 Subject: Redefine ATOMIC_INIT and ATOMIC64_INIT to drop the casts The following build error occurred during an alpha build: net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Cc: Signed-off-by: Mel Gorman Signed-off-by: Fengguang Wu Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffeae3bc..c2cbe4fc391c 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) -- cgit v1.2.3 From d1b5153f3ec83789b71d64efaf2a880c8fe6358e Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Sun, 19 Aug 2012 14:41:04 +1200 Subject: alpha: Fix fall-out from disintegrating asm/system.h Commit ec2212088c42 ("Disintegrate asm/system.h for Alpha") removed asm/system.h however arch/alpha/oprofile/common.c requires definitions that were shifted from asm/system.h to asm/special_insns.h. Include that. Signed-off-by: Michael Cree Acked-by: Matt Turner Signed-off-by: Linus Torvalds --- arch/alpha/oprofile/common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27aa215..b8ce18f485d3 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "op_impl.h" -- cgit v1.2.3 From 7c3ea4859ae132d61594320e148b0348f03c0edc Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 18 Aug 2012 13:23:49 -0300 Subject: [IA64] defconfig: Remove CONFIG_MISC_DEVICES commit 7c5763b845 (drivers:misc: Remove MISC_DEVICES config option) removed CONFIG_MISC_DEVICES option, so remove the occurrences from the config files as well. Signed-off-by: Fabio Estevam Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 1 - arch/ia64/configs/gensparse_defconfig | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 954d81e2e837..7913695b2fcb 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y -CONFIG_MISC_DEVICES=y CONFIG_INTEL_IOMMU=y diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index 91c41ecfa6d9..f8e913365423 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y CONFIG_CRYPTO_MD5=y -CONFIG_MISC_DEVICES=y -- cgit v1.2.3 From cbe05685c1859e655c663b6ff2d0f71093ee834d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 12 Aug 2012 12:01:34 +0200 Subject: s390: Always use "long" for ssize_t to match size_t On s390x-linux-gcc, __SIZE_TYPE__ expands to "long unsigned int" for both 32-bit s390 and 64-bit s390x, as gcc-4.6.3-nolibc/s390x-linux/lib/gcc/s390x-linux/4.6.3/plugin/include/config/s390/linux.h has #define SIZE_TYPE (TARGET_64BIT ? "long unsigned int" : "long unsigned int") To match this, __kernel_size_t is always set to "long unsigned int". But while __kernel_ssize_t is "long" on 64-bit s390x, it is "int" on 32-bit s390, causing compiler warnings like: fs/quota/quota_tree.c:372:4: warning: format '%zd' expects argument of type 'signed size_t', but argument 4 has type 'ssize_t' [-Wformat] To fix this, __kernel_ssize_t should be "long", irrespective of word size. Signed-off-by: Geert Uytterhoeven Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/posix_types.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h index 7bcc14e395f0..bf2a2ad2f800 100644 --- a/arch/s390/include/asm/posix_types.h +++ b/arch/s390/include/asm/posix_types.h @@ -13,6 +13,7 @@ */ typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; #define __kernel_size_t __kernel_size_t typedef unsigned short __kernel_old_dev_t; @@ -25,7 +26,6 @@ typedef unsigned short __kernel_mode_t; typedef unsigned short __kernel_ipc_pid_t; typedef unsigned short __kernel_uid_t; typedef unsigned short __kernel_gid_t; -typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; #else /* __s390x__ */ @@ -35,7 +35,6 @@ typedef unsigned int __kernel_mode_t; typedef int __kernel_ipc_pid_t; typedef unsigned int __kernel_uid_t; typedef unsigned int __kernel_gid_t; -typedef long __kernel_ssize_t; typedef long __kernel_ptrdiff_t; typedef unsigned long __kernel_sigset_t; /* at least 32 bits */ -- cgit v1.2.3 From eb48c071464757414538c68a6033c8f8c15196f8 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 21 Aug 2012 16:15:52 -0700 Subject: mm: hugetlbfs: correctly populate shared pmd Each page mapped in a process's address space must be correctly accounted for in _mapcount. Normally the rules for this are straightforward but hugetlbfs page table sharing is different. The page table pages at the PMD level are reference counted while the mapcount remains the same. If this accounting is wrong, it causes bugs like this one reported by Larry Woodman: kernel BUG at mm/filemap.c:135! invalid opcode: 0000 [#1] SMP CPU 22 Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi] Pid: 18001, comm: mpitest Tainted: G W 3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2 RIP: 0010:[] [] __delete_from_page_cache+0x15d/0x170 Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20) Call Trace: delete_from_page_cache+0x40/0x80 truncate_hugepages+0x115/0x1f0 hugetlbfs_evict_inode+0x18/0x30 evict+0x9f/0x1b0 iput_final+0xe3/0x1e0 iput+0x3e/0x50 d_kill+0xf8/0x110 dput+0xe2/0x1b0 __fput+0x162/0x240 During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc() shared page tables with the check dst_pte == src_pte. The logic is if the PMD page is the same, they must be shared. This assumes that the sharing is between the parent and child. However, if the sharing is with a different process entirely then this check fails as in this diagram: parent | ------------>pmd src_pte----------> data page ^ other--------->pmd--------------------| ^ child-----------| dst_pte For this situation to occur, it must be possible for Parent and Other to have faulted and failed to share page tables with each other. This is possible due to the following style of race. PROC A PROC B copy_hugetlb_page_range copy_hugetlb_page_range src_pte == huge_pte_offset src_pte == huge_pte_offset !src_pte so no sharing !src_pte so no sharing (time passes) hugetlb_fault hugetlb_fault huge_pte_alloc huge_pte_alloc huge_pmd_share huge_pmd_share LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) LOCK(i_mmap_mutex) find nothing, no sharing UNLOCK(i_mmap_mutex) pmd_alloc pmd_alloc LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) LOCK(instantiation_mutex) fault UNLOCK(instantiation_mutex) These two processes are not poing to the same data page but are not sharing page tables because the opportunity was missed. When either process later forks, the src_pte == dst pte is potentially insufficient. As the check falls through, the wrong PTE information is copied in (harmless but wrong) and the mapcount is bumped for a page mapped by a shared page table leading to the BUG_ON. This patch addresses the issue by moving pmd_alloc into huge_pmd_share which guarantees that the shared pud is populated in the same critical section as pmd. This also means that huge_pte_offset test in huge_pmd_share is serialized correctly now which in turn means that the success of the sharing will be higher as the racing tasks see the pud and pmd populated together. Race identified and changelog written mostly by Mel Gorman. {akpm@linux-foundation.org: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style] Reported-by: Larry Woodman Tested-by: Larry Woodman Reviewed-by: Mel Gorman Signed-off-by: Michal Hocko Reviewed-by: Rik van Riel Cc: David Gibson Cc: Ken Chen Cc: Cong Wang Cc: Hillf Danton Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index f6679a7fb8ca..b91e48512425 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -56,9 +56,16 @@ static int vma_shareable(struct vm_area_struct *vma, unsigned long addr) } /* - * search for a shareable pmd page for hugetlb. + * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc() + * and returns the corresponding pte. While this is not necessary for the + * !shared pmd case because we can allocate the pmd later as well, it makes the + * code much cleaner. pmd allocation is essential for the shared case because + * pud has to be populated inside the same i_mmap_mutex section - otherwise + * racing tasks could either miss the sharing (see huge_pte_offset) or select a + * bad pmd for sharing. */ -static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) +static pte_t * +huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) { struct vm_area_struct *vma = find_vma(mm, addr); struct address_space *mapping = vma->vm_file->f_mapping; @@ -68,9 +75,10 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) struct vm_area_struct *svma; unsigned long saddr; pte_t *spte = NULL; + pte_t *pte; if (!vma_shareable(vma, addr)) - return; + return (pte_t *)pmd_alloc(mm, pud, addr); mutex_lock(&mapping->i_mmap_mutex); vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) { @@ -97,7 +105,9 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) put_page(virt_to_page(spte)); spin_unlock(&mm->page_table_lock); out: + pte = (pte_t *)pmd_alloc(mm, pud, addr); mutex_unlock(&mapping->i_mmap_mutex); + return pte; } /* @@ -142,8 +152,9 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, } else { BUG_ON(sz != PMD_SIZE); if (pud_none(*pud)) - huge_pmd_share(mm, addr, pud); - pte = (pte_t *) pmd_alloc(mm, pud, addr); + pte = huge_pmd_share(mm, addr, pud); + else + pte = (pte_t *)pmd_alloc(mm, pud, addr); } } BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte)); -- cgit v1.2.3 From 83be4ffa1acbcd529b771f4d2e639b15e2b7957e Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Tue, 14 Aug 2012 14:47:37 -0700 Subject: x86/spinlocks: Fix comment in spinlock.h This comment is no longer true. We support up to 2^16 CPUs because __ticket_t is an u16 if NR_CPUS is larger than 256. Signed-off-by: Richard Weinberger Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/include/asm/spinlock.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index b315a33867f2..33692eaabab5 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -12,8 +12,7 @@ * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * - * These are fair FIFO ticket locks, which are currently limited to 256 - * CPUs. + * These are fair FIFO ticket locks, which support up to 2^16 CPUs. * * (the type definitions are in asm/spinlock_types.h) */ -- cgit v1.2.3 From 2530cd4f448935c74eeb49f29559589928e4b2f0 Mon Sep 17 00:00:00 2001 From: "Liu, Chuansheng" Date: Tue, 14 Aug 2012 06:55:01 +0000 Subject: x86/fixup_irq: Use cpu_online_mask instead of cpu_all_mask When one CPU is going down and this CPU is the last one in irq affinity, current code is setting cpu_all_mask as the new affinity for that irq. But for some systems (such as in Medfield Android mobile) the firmware sends the interrupt to each CPU in the irq affinity mask, averaged, and cpu_all_mask includes all potential CPUs, i.e. offline ones as well. So replace cpu_all_mask with cpu_online_mask. Signed-off-by: liu chuansheng Acked-by: Yanmin Zhang Acked-by: Thomas Gleixner Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A137286@SHSMSX101.ccr.corp.intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 7ad683d78645..d44f7829968e 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -270,7 +270,7 @@ void fixup_irqs(void) if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { break_affinity = 1; - affinity = cpu_all_mask; + affinity = cpu_online_mask; } chip = irq_data_get_irq_chip(data); -- cgit v1.2.3 From cb09cad44f07044d9810f18f6f9a6a6f3771f979 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 22 Aug 2012 13:03:48 +0300 Subject: x86/alternatives: Fix p6 nops on non-modular kernels Probably a leftover from the early days of self-patching, p6nops are marked __initconst_or_module, which causes them to be discarded in a non-modular kernel. If something later triggers patching, it will overwrite kernel code with garbage. Reported-by: Tomas Racek Signed-off-by: Avi Kivity Cc: Michael Tokarev Cc: Borislav Petkov Cc: Marcelo Tosatti Cc: qemu-devel@nongnu.org Cc: Anthony Liguori Cc: H. Peter Anvin Cc: Alan Cox Cc: Alan Cox Link: http://lkml.kernel.org/r/5034AE84.90708@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/alternative.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index afb7ff79a29f..ced4534baed5 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -165,7 +165,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = #endif #ifdef P6_NOP1 -static const unsigned char __initconst_or_module p6nops[] = +static const unsigned char p6nops[] = { P6_NOP1, P6_NOP2, -- cgit v1.2.3 From 6c0274cbe63ec265f842537825684a619e6cce93 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 22 Aug 2012 12:13:48 +0200 Subject: ARM: shmobile: sh73a0: fixup RELOC_BASE of intca_irq_pins_desc sh73a0 :: intca_irq_pins_desc irq table had conflict from irq 552 to irq 557 before. But the second controller was simply trampling the first one by way of the -EEXIST case from irq_alloc_desc_at(). But now, we have irqdomain support from 1d6a21b0a672fb29b01ccf397d478e0541e17716 (sh: intc: initial irqdomain support) The irqdomain code has simply tightened down the sanity checks and error path. So, sh73a0 CPU board got some WARNING when booting now. This patch fixup RELOC_BASE to solve this issue. Signed-off-by: Kuninori Morimoto Acked-by: Magnus Damm Signed-off-by: Rafael J. Wysocki --- arch/arm/mach-shmobile/intc-sh73a0.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee447404c857..588555a67d9c 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, -- cgit v1.2.3 From 35f2d16bb9ace0fb2671b8232839944ad9057c6f Mon Sep 17 00:00:00 2001 From: Takuya Yoshikawa Date: Mon, 20 Aug 2012 18:35:39 +0900 Subject: KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended Although the possible race described in commit 85b7059169e128c57a3a8a3e588fb89cb2031da1 KVM: MMU: fix shrinking page from the empty mmu was correct, the real cause of that issue was a more trivial bug of mmu_shrink() introduced by commit 1952639665e92481c34c34c3e2a71bf3e66ba362 KVM: MMU: do not iterate over all VMs in mmu_shrink() Here is the bug: if (kvm->arch.n_used_mmu_pages > 0) { if (!nr_to_scan--) break; continue; } We skip VMs whose n_used_mmu_pages is not zero and try to shrink others: in other words we try to shrink empty ones by mistake. This patch reverses the logic so that mmu_shrink() can free pages from the first VM whose n_used_mmu_pages is not zero. Note that we also add comments explaining the role of nr_to_scan which is not practically important now, hoping this will be improved in the future. Signed-off-by: Takuya Yoshikawa Cc: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 01ca00423938..7fbd0d273ea8 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4112,17 +4112,22 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) int idx; LIST_HEAD(invalid_list); + /* + * Never scan more than sc->nr_to_scan VM instances. + * Will not hit this condition practically since we do not try + * to shrink more than one VM and it is very unlikely to see + * !n_used_mmu_pages so many times. + */ + if (!nr_to_scan--) + break; /* * n_used_mmu_pages is accessed without holding kvm->mmu_lock * here. We may skip a VM instance errorneosly, but we do not * want to shrink a VM that only started to populate its MMU * anyway. */ - if (kvm->arch.n_used_mmu_pages > 0) { - if (!nr_to_scan--) - break; + if (!kvm->arch.n_used_mmu_pages) continue; - } idx = srcu_read_lock(&kvm->srcu); spin_lock(&kvm->mmu_lock); -- cgit v1.2.3 From 5ad105e569c45dcfad50d724c61d5061248be755 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 19 Aug 2012 14:34:31 +0300 Subject: KVM: x86 emulator: use stack size attribute to mask rsp in stack ops The sub-register used to access the stack (sp, esp, or rsp) is not determined by the address size attribute like other memory references, but by the stack segment's B bit (if not in x86_64 mode). Fix by using the existing stack_mask() to figure out the correct mask. This long-existing bug was exposed by a combination of a27685c33acccce (emulate invalid guest state by default), which causes many more instructions to be emulated, and a seabios change (possibly a bug) which causes the high 16 bits of esp to become polluted across calls to real mode software interrupts. Signed-off-by: Avi Kivity Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/emulate.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 97d9a9914ba8..a3b57a27be88 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -475,13 +475,26 @@ register_address(struct x86_emulate_ctxt *ctxt, unsigned long reg) return address_mask(ctxt, reg); } +static void masked_increment(ulong *reg, ulong mask, int inc) +{ + assign_masked(reg, *reg + inc, mask); +} + static inline void register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc) { + ulong mask; + if (ctxt->ad_bytes == sizeof(unsigned long)) - *reg += inc; + mask = ~0UL; else - *reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt)); + mask = ad_mask(ctxt); + masked_increment(reg, mask, inc); +} + +static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc) +{ + masked_increment(&ctxt->regs[VCPU_REGS_RSP], stack_mask(ctxt), inc); } static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel) @@ -1522,8 +1535,8 @@ static int push(struct x86_emulate_ctxt *ctxt, void *data, int bytes) { struct segmented_address addr; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes); - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + rsp_increment(ctxt, -bytes); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; return segmented_write(ctxt, addr, data, bytes); @@ -1542,13 +1555,13 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt, int rc; struct segmented_address addr; - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; rc = segmented_read(ctxt, addr, dest, len); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len); + rsp_increment(ctxt, len); return rc; } @@ -1688,8 +1701,7 @@ static int em_popa(struct x86_emulate_ctxt *ctxt) while (reg >= VCPU_REGS_RAX) { if (reg == VCPU_REGS_RSP) { - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], - ctxt->op_bytes); + rsp_increment(ctxt, ctxt->op_bytes); --reg; } @@ -2825,7 +2837,7 @@ static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt) rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val); + rsp_increment(ctxt, ctxt->src.val); return X86EMUL_CONTINUE; } -- cgit v1.2.3 From 36bf50d7697be18c6bfd0401e037df10bff1e573 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Tue, 31 Jul 2012 15:41:45 +0200 Subject: x86, microcode, AMD: Fix broken ucode patch size check This issue was recently observed on an AMD C-50 CPU where a patch of maximum size was applied. Commit be62adb49294 ("x86, microcode, AMD: Simplify ucode verification") added current_size in get_matching_microcode(). This is calculated as size of the ucode patch + 8 (ie. size of the header). Later this is compared against the maximum possible ucode patch size for a CPU family. And of course this fails if the patch has already maximum size. Cc: [3.3+] Signed-off-by: Andreas Herrmann Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/1344361461-10076-1-git-send-email-bp@amd64.org Signed-off-by: H. Peter Anvin --- arch/x86/kernel/microcode_amd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 8a2ce8fd41c0..82746f942cd8 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -143,11 +143,12 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, unsigned int *current_size) { struct microcode_header_amd *mc_hdr; - unsigned int actual_size; + unsigned int actual_size, patch_size; u16 equiv_cpu_id; /* size of the current patch we're staring at */ - *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE; + patch_size = *(u32 *)(ucode_ptr + 4); + *current_size = patch_size + SECTION_HDR_SIZE; equiv_cpu_id = find_equiv_id(); if (!equiv_cpu_id) @@ -174,7 +175,7 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, /* * now that the header looks sane, verify its size */ - actual_size = verify_ucode_size(cpu, *current_size, leftover_size); + actual_size = verify_ucode_size(cpu, patch_size, leftover_size); if (!actual_size) return 0; -- cgit v1.2.3 From 85ebea12f59e3341049a9c17edcb73fcf21043db Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 14 Aug 2012 11:19:21 +0200 Subject: ARM: at91: fix system timer irq issue due to sparse irq support AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. Signed-off-by: Ludovic Desroches Tested-by: Joachim Eastwood Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91rm9200_time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d18..aaa443b48c91 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting -- cgit v1.2.3 From e402af6caa02f12ad213af2e22aa8a32970f99b0 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 14 Aug 2012 11:19:22 +0200 Subject: ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support AT91_ID_SYS as virq is incorrect because of spare irq support which introduces NR_IRQS_LEGACY offset. It modifies rtc-at91sam9 driver in order to get irq from resources. Signed-off-by: Ludovic Desroches Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91sam9260_devices.c | 6 +++++- arch/arm/mach-at91/at91sam9261_devices.c | 6 +++++- arch/arm/mach-at91/at91sam9263_devices.c | 10 ++++++++-- arch/arm/mach-at91/at91sam9g45_devices.c | 6 +++++- arch/arm/mach-at91/at91sam9rl_devices.c | 6 +++++- drivers/rtc/rtc-at91sam9.c | 22 +++++++++++++++------- 6 files changed, 43 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396ed..bce572a530ef 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff92..bc2590d712d0 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9f..9b6ca734f1a9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a382..1b47319ca00b 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff932172..b3d365dadef5 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 831868904e02..1dd61f402b04 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -58,6 +58,7 @@ struct sam9_rtc { struct rtc_device *rtcdev; u32 imr; void __iomem *gpbr; + int irq; }; #define rtt_readl(rtc, field) \ @@ -292,7 +293,7 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) { struct resource *r, *r_gpbr; struct sam9_rtc *rtc; - int ret; + int ret, irq; u32 mr; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -302,10 +303,18 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) return -ENODEV; } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get interrupt resource\n"); + return irq; + } + rtc = kzalloc(sizeof *rtc, GFP_KERNEL); if (!rtc) return -ENOMEM; + rtc->irq = irq; + /* platform setup code should have handled this; sigh */ if (!device_can_wakeup(&pdev->dev)) device_init_wakeup(&pdev->dev, 1); @@ -345,11 +354,10 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) } /* register irq handler after we know what name we'll use */ - ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, - IRQF_SHARED, + ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED, dev_name(&rtc->rtcdev->dev), rtc); if (ret) { - dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); + dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq); rtc_device_unregister(rtc->rtcdev); goto fail_register; } @@ -386,7 +394,7 @@ static int __devexit at91_rtc_remove(struct platform_device *pdev) /* disable all interrupts */ rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); - free_irq(AT91_ID_SYS, rtc); + free_irq(rtc->irq, rtc); rtc_device_unregister(rtc->rtcdev); @@ -423,7 +431,7 @@ static int at91_rtc_suspend(struct platform_device *pdev, rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); if (rtc->imr) { if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { - enable_irq_wake(AT91_ID_SYS); + enable_irq_wake(rtc->irq); /* don't let RTTINC cause wakeups */ if (mr & AT91_RTT_RTTINCIEN) rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); @@ -441,7 +449,7 @@ static int at91_rtc_resume(struct platform_device *pdev) if (rtc->imr) { if (device_may_wakeup(&pdev->dev)) - disable_irq_wake(AT91_ID_SYS); + disable_irq_wake(rtc->irq); mr = rtt_readl(rtc, MR); rtt_writel(rtc, MR, mr | rtc->imr); } -- cgit v1.2.3 From 2ed1f58900280f79485bbc15f781687bd9584675 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 9 Jul 2012 21:06:25 +0200 Subject: ARM: at91/clock: fix PLLA overclock warning Fix PLLA overclock warning in relation with datasheet numbers. Add new > 240 MHz and > 210 MHz SoC categories. Reported-by: Jiri Prchal Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/clock.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea7..188c82971ebd 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; -- cgit v1.2.3 From 9e0255dd035348953e23161b7158b2ce0ddc182e Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 17 Aug 2012 16:23:56 +0800 Subject: ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts Remove the malformed "mem=" bootargs parameter in at91sam9g25ek.dts Signed-off-by: Bo Shen Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9g25ek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb22..96514c134e54 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { -- cgit v1.2.3 From c944b0b9354ea06ffb0c8a7178949f1185f9f499 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 18 Aug 2012 14:27:32 +0800 Subject: ARM: imx6: spin the cpu until hardware takes it down Though commit 602bf40 (ARM: imx6: exit coherency when shutting down a cpu) improves the stability of imx6q cpu hotplug a lot, there are still hangs seen with a more stressful hotplug testing. It's expected that once imx_enable_cpu(cpu, false) is called, the cpu will be taken down by hardware immediately, and the code after that will not get any chance to execute. However, this is not always the case from the testing. The cpu could possibly be alive for a few cycles before hardware actually takes it down. So rather than letting cpu execute some code that could cause a hang in these cycles, let's make the cpu spin there and wait for hardware to take it down. Cc: Signed-off-by: Shawn Guo --- arch/arm/mach-imx/hotplug.c | 23 +++-------------------- 1 file changed, 3 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1af..f8f7437c83b8 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) -- cgit v1.2.3 From a46d2619d7180bda12bad2bf15bbd0731dfc2dcf Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 21:46:39 +0800 Subject: ARM: dts: imx51-babbage: fix esdhc cd/wp properties The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by: Chris Ball Signed-off-by: Shawn Guo Cc: Acked-by: Chris Ball --- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt | 8 ++++---- arch/arm/boot/dts/imx51-babbage.dts | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa8..1dd622546d06 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea2..59d9789e5508 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; -- cgit v1.2.3 From a1dca315ce3f78347bca8ce8befe3cc71ae63b7e Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 23 Aug 2012 15:35:26 +0200 Subject: MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module If the controller has no PCIe module attached, accessing of the device configuration space causes a data bus error. Avoid this by checking the status of the PCIe link in advance, and indicate an error if the link is down. Signed-off-by: Gabor Juhos Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4293/ Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ar724x.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 414a7459858d..86d77a666458 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -23,9 +23,12 @@ #define AR724X_PCI_MEM_BASE 0x10000000 #define AR724X_PCI_MEM_SIZE 0x08000000 +#define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c #define AR724X_PCI_REG_INT_MASK 0x50 +#define AR724X_PCI_RESET_LINK_UP BIT(0) + #define AR724X_PCI_INT_DEV0 BIT(14) #define AR724X_PCI_IRQ_COUNT 1 @@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base; static u32 ar724x_pci_bar0_value; static bool ar724x_pci_bar0_is_cached; +static bool ar724x_pci_link_up; + +static inline bool ar724x_pci_check_link(void) +{ + u32 reset; + + reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); + return reset & AR724X_PCI_RESET_LINK_UP; +} static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t *value) @@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base; u32 data; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, u32 data; int s; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq) if (ar724x_pci_ctrl_base == NULL) goto err_unmap_devcfg; + ar724x_pci_link_up = ar724x_pci_check_link(); + if (!ar724x_pci_link_up) + pr_warn("ar724x: PCIe link is down\n"); + ar724x_pci_irq_init(irq); register_pci_controller(&ar724x_pci_controller); -- cgit v1.2.3 From c96aae1f7f393387d160211f60398d58463a7e65 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 17 Aug 2012 16:43:28 -0400 Subject: xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M. When we are finished with return PFNs to the hypervisor, then populate it back, and also mark the E820 MMIO and E820 gaps as IDENTITY_FRAMEs, we then call P2M to set areas that can be used for ballooning. We were off by one, and ended up over-writting a P2M entry that most likely was an IDENTITY_FRAME. For example: 1-1 mapping on 40000->40200 1-1 mapping on bc558->bc5ac 1-1 mapping on bc5b4->bc8c5 1-1 mapping on bc8c6->bcb7c 1-1 mapping on bcd00->100000 Released 614 pages of unused memory Set 277889 page(s) to 1-1 mapping Populating 40200-40466 pfn range: 614 pages added => here we set from 40466 up to bc559 P2M tree to be INVALID_P2M_ENTRY. We should have done it up to bc558. The end result is that if anybody is trying to construct a PTE for PFN bc558 they end up with ~PAGE_PRESENT. CC: stable@vger.kernel.org Reported-by-and-Tested-by: Andre Przywara Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ead85576d54a..d11ca11d14fc 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -78,9 +78,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size) memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); + for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + continue; + WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); - for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + } } static unsigned long __init xen_do_chunk(unsigned long start, -- cgit v1.2.3 From c7a9b09b1a4a1fbccb2ec409daec95f9068d77c0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 20:51:54 +0000 Subject: ARM: omap: allow building omap44xx without SMP The new omap4 cpuidle implementation currently requires ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP. This patch makes it possible to build a non-SMP kernel for that platform. This is not normally desired for end-users but can be useful for testing. Without this patch, building rand-0y2jSKT results in: drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke': drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration] It's not clear if this patch is the best solution for the problem at hand. I have made sure that we can now build the kernel in all configurations, but that does not mean it will actually work on an OMAP44xx. Signed-off-by: Arnd Bergmann Acked-by: Santosh Shilimkar Tested-by: Santosh Shilimkar Cc: Kevin Hilman Cc: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 2 +- arch/arm/mach-omap2/cpuidle44xx.c | 3 ++- include/linux/cpuidle.h | 4 ++++ 3 files changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f778..66a8be331caf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,7 +62,7 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e193fc61..288bee6cbb76 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 040b13b5c14a..279b1eaa8b73 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -194,6 +194,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; } #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a); +#else +static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a) +{ +} #endif /****************************** -- cgit v1.2.3 From a28eecef8ac2671dce7d892165bf374eeaa04e15 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 15 Aug 2012 21:56:39 +0000 Subject: ARM: imx: build pm-imx5 code only when PM is enabled This moves the imx5 pm code out of the list of unconditionally compiled files for imx5, mirroring what we already do for imx6 and how it was done before the code was move from mach-mx5 to mach-imx in v3.3. Without this patch, building with CONFIG_PM disabled results in: arch/arm/mach-imx/pm-imx5.c:202:116: error: redefinition of 'imx51_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:154:91: note: previous definition of 'imx51_pm_init' was here arch/arm/mach-imx/pm-imx5.c:209:116: error: redefinition of 'imx53_pm_init' arch/arm/mach-imx/include/mach-imx/common.h:155:91: note: previous definition of 'imx53_pm_init' was here Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4cf..e08adb7b8dd5 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o -- cgit v1.2.3 From 9f9ba0fdecff64ffc6986645216ffc3a8b664f08 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 07:42:50 +0000 Subject: ARM: imx: fix ksz9021rn_phy_fixup The ksz9021rn_phy_fixup and mx6q_sabrelite functions try to set up an ethernet phy if they can. They do check whether phylib is enabled, but unfortunately the functions can only be called from platform code if phylib is builtin, not if it is a module Without this patch, building with a modular phylib results in: arch/arm/mach-imx/mach-imx6q.c: In function 'imx6q_sabrelite_init': arch/arm/mach-imx/mach-imx6q.c:120:5: error: 'ksz9021rn_phy_fixup' undeclared (first use in this function) arch/arm/mach-imx/mach-imx6q.c:120:5: note: each undeclared identifier is reported only once for each function it appears in The bug was originally reported by Artem Bityutskiy but only partially fixed in ef441806 "ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled". Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Artem Bityutskiy Cc: Sascha Hauer --- arch/arm/mach-imx/mach-imx6q.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a76..045b3f6a387d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); -- cgit v1.2.3 From f637c4c9405e21f44cf0045eaf77eddd3a79ca5a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 16 Aug 2012 10:40:40 +0000 Subject: ARM: imx: select CPU_FREQ_TABLE when needed The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers, so it needs to select that code to be built. This problem has apparently existed since the i.MX cpufreq code was first merged in v2.6.37. Building IMX without CPU_FREQ_TABLE results in: arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit': arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr' arch/arm/plat-mxc/built-in.o: In function `mxc_set_target': arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target' arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed': arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify' arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init': arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo' arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr' Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Sascha Hauer Cc: Yong Shen Cc: stable@vger.kernel.org --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5..84b5a0cb7a5c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2150,6 +2150,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. -- cgit v1.2.3 From 1fc593feaf8e440511f381f4cdff483b55bbf546 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 17 Aug 2012 00:16:08 +0000 Subject: ARM: imx: build i.MX6 functions only when needed The head-v7.S contains a call to the generic cpu_suspend function, which is only available when selected by the i.MX6 code. As pointed out by Shawn Guo, i.MX5 does not actually use any functions defined in head-v7.S. It is also needed only for the i.MX6 power management code and for the SMP code, so we can restrict building this file to situations in which at least one of those two is present. Finally, other platforms with a similar file call it headsmp.S, so we can rename it to the same for consistency. Without this patch, building imx5 standalone results in: arch/arm/mach-imx/built-in.o: In function `v7_cpu_resume': arch/arm/mach-imx/head-v7.S:104: undefined reference to `cpu_resume' Signed-off-by: Arnd Bergmann Acked-by: Shawn Guo Cc: Eric Miao Cc: stable@vger.kernel.org --- arch/arm/mach-imx/Makefile | 7 ++- arch/arm/mach-imx/head-v7.S | 106 -------------------------------------------- arch/arm/mach-imx/headsmp.S | 106 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 109 insertions(+), 110 deletions(-) delete mode 100644 arch/arm/mach-imx/head-v7.S create mode 100644 arch/arm/mach-imx/headsmp.S (limited to 'arch') diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index e08adb7b8dd5..d004d37ad9d8 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -71,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S deleted file mode 100644 index 7e49deb128a4..000000000000 --- a/arch/arm/mach-imx/head-v7.S +++ /dev/null @@ -1,106 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include - - .section ".text.head", "ax" - -/* - * The secondary kernel init calls v7_flush_dcache_all before it enables - * the L1; however, the L1 comes out of reset in an undefined state, so - * the clean + invalidate performed by v7_flush_dcache_all causes a bunch - * of cache lines with uninitialized data and uninitialized tags to get - * written out to memory, which does really unpleasant things to the main - * processor. We fix this by performing an invalidate, rather than a - * clean + invalidate, before jumping into the kernel. - * - * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs - * to be called for both secondary cores startup and primary core resume - * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. - */ -ENTRY(v7_invalidate_l1) - mov r0, #0 - mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache - mcr p15, 2, r0, c0, c0, 0 - mrc p15, 1, r0, c0, c0, 0 - - ldr r1, =0x7fff - and r2, r1, r0, lsr #13 - - ldr r1, =0x3ff - - and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets - - and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp< +#include +#include +#include + + .section ".text.head", "ax" + +/* + * The secondary kernel init calls v7_flush_dcache_all before it enables + * the L1; however, the L1 comes out of reset in an undefined state, so + * the clean + invalidate performed by v7_flush_dcache_all causes a bunch + * of cache lines with uninitialized data and uninitialized tags to get + * written out to memory, which does really unpleasant things to the main + * processor. We fix this by performing an invalidate, rather than a + * clean + invalidate, before jumping into the kernel. + * + * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs + * to be called for both secondary cores startup and primary core resume + * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S. + */ +ENTRY(v7_invalidate_l1) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + ldr r1, =0x7fff + and r2, r1, r0, lsr #13 + + ldr r1, =0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp< Date: Wed, 15 Aug 2012 20:34:48 +0000 Subject: ARM: ux500: don't select LEDS_GPIO for snowball Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann Cc: Linus Walleij Cc: Lee Jones --- arch/arm/configs/u8500_defconfig | 1 + arch/arm/mach-ux500/Kconfig | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf6..da6845493caa 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79cac..53d3d46dec12 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. -- cgit v1.2.3 From 823f74733d8f89eaabfb25f93680fb7e05861348 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:24 -0500 Subject: powerpc/fsl: update defconfigs run make savedefconfig on fsl defconfigs. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 30 ++++++++------------------- arch/powerpc/configs/corenet32_smp_defconfig | 28 +++++++------------------ arch/powerpc/configs/mpc83xx_defconfig | 17 ++++----------- arch/powerpc/configs/mpc85xx_defconfig | 31 +++++++--------------------- arch/powerpc/configs/mpc85xx_smp_defconfig | 31 +++++++--------------------- 5 files changed, 35 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index f4337bacd0e7..a79b0a9316a5 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y @@ -67,7 +66,6 @@ CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -80,15 +78,14 @@ CONFIG_SATA_FSL=y CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_E1000E=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -98,16 +95,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_SOUND=y @@ -123,7 +119,6 @@ CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -150,22 +145,15 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_FRAME_WARN=8092 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index cbb98c1234fd..f085699dab7c 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y -CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P2041_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y # CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y CONFIG_NET=y @@ -77,17 +76,14 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -115,11 +111,9 @@ CONFIG_SERIO_LIBPS2=y CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -132,7 +126,6 @@ CONFIG_SPI_FSL_ESPI=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -142,8 +135,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -170,19 +161,16 @@ CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_RCU_TRACE=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5aac9a8bc53b..e116dc9e8a2e 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_CHRP is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y @@ -25,7 +25,6 @@ CONFIG_ASP834x=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_NET=y CONFIG_PACKET=y @@ -44,8 +43,6 @@ CONFIG_INET_ESP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -64,15 +61,14 @@ CONFIG_ATA=y CONFIG_SATA_FSL=y CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_VITESSE_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -112,17 +108,12 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_T10DIF=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 99a4dd3b30cc..a036a622be5a 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -40,8 +44,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 @@ -78,32 +80,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -135,7 +125,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -184,7 +173,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -230,18 +218,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index fdfa84dc908f..4ba5255232bc 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -42,8 +46,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y @@ -81,32 +83,20 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -137,7 +127,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -186,7 +175,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -232,18 +220,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -- cgit v1.2.3 From 1267643dc311e860e728dbd09a97c2e0a773bfdb Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 22 Aug 2012 13:43:30 -0500 Subject: powerpc/fsl: fix "Failed to mount /dev: No such device" errors Yocto (Built by Poky 7.0) 1.2 root filesystems fail to boot, at least over nfs, with: Failed to mount /dev: No such device Configuring DEVTMPFS fixes it. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/p1023rds_defconfig | 1 + arch/powerpc/configs/corenet32_smp_defconfig | 1 + arch/powerpc/configs/corenet64_smp_defconfig | 1 + arch/powerpc/configs/mpc83xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_smp_defconfig | 1 + 6 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index a79b0a9316a5..26e541c4662b 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -62,6 +62,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index f085699dab7c..8b3d57c1ebe8 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -69,6 +69,7 @@ CONFIG_INET_IPCOMP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index dd89de8b0b7f..0516e22ca3de 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -56,6 +56,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index e116dc9e8a2e..9352e4430c3b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -41,6 +41,7 @@ CONFIG_INET_ESP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index a036a622be5a..8b5bda27d248 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -76,6 +76,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 4ba5255232bc..b0974e7e98ae 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -79,6 +79,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y -- cgit v1.2.3 From ca5dd3954a62dc14c2afff1c34b3b5d8dc74f777 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:12 +0000 Subject: powerpc: Fix xmon dl command for new printk implementation Since the printk internals were reworked the xmon 'dl' command which dumps the content of __log_buf has stopped working. It is now a structured buffer, so just dumping it doesn't really work. Use the helpers added for kgdb to print out the content. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 36 ++++++++++-------------------------- 1 file changed, 10 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index eab3492a45c5..013f28668781 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -2148,40 +2149,23 @@ print_address(unsigned long addr) void dump_log_buf(void) { - const unsigned long size = 128; - unsigned long end, addr; - unsigned char buf[size + 1]; - - addr = 0; - buf[size] = '\0'; + struct kmsg_dumper dumper = { .active = 1 }; + unsigned char buf[128]; + size_t len; if (setjmp(bus_error_jmp) != 0) { - printf("Unable to lookup symbol __log_buf!\n"); + printf("Error dumping printk buffer!\n"); return; } catch_memory_errors = 1; sync(); - addr = kallsyms_lookup_name("__log_buf"); - - if (! addr) - printf("Symbol __log_buf not found!\n"); - else { - end = addr + (1 << CONFIG_LOG_BUF_SHIFT); - while (addr < end) { - if (! mread(addr, buf, size)) { - printf("Can't read memory at address 0x%lx\n", addr); - break; - } - - printf("%s", buf); - if (strlen(buf) < size) - break; - - addr += size; - } - } + kmsg_dump_rewind_nolock(&dumper); + while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { + buf[len] = '\0'; + printf("%s", buf); + } sync(); /* wait a little while to see if we get a machine check */ -- cgit v1.2.3 From e3bc8049e524f13e09a58f5bad70b6738494277a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 23 Aug 2012 22:09:13 +0000 Subject: powerpc: Fixup whitespace in xmon There are a few whitespace goolies in xmon.c, some of them appear to be my fault. Fix them all in one go. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 013f28668781..9b49c65ee7a4 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -895,13 +895,13 @@ cmds(struct pt_regs *excp) #endif default: printf("Unrecognized command: "); - do { + do { if (' ' < cmd && cmd <= '~') putchar(cmd); else printf("\\x%x", cmd); cmd = inchar(); - } while (cmd != '\n'); + } while (cmd != '\n'); printf(" (type ? for help)\n"); break; } @@ -1098,7 +1098,7 @@ static long check_bp_loc(unsigned long addr) return 1; } -static char *breakpoint_help_string = +static char *breakpoint_help_string = "Breakpoint command usage:\n" "b show breakpoints\n" "b [cnt] set breakpoint at given instr addr\n" @@ -1194,7 +1194,7 @@ bpt_cmds(void) default: termch = cmd; - cmd = skipbl(); + cmd = skipbl(); if (cmd == '?') { printf(breakpoint_help_string); break; @@ -1360,7 +1360,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, sp + REGS_OFFSET); break; } - printf("--- Exception: %lx %s at ", regs.trap, + printf("--- Exception: %lx %s at ", regs.trap, getvecname(TRAP(®s))); pc = regs.nip; lr = regs.link; @@ -1624,14 +1624,14 @@ static void super_regs(void) cmd = skipbl(); if (cmd == '\n') { - unsigned long sp, toc; + unsigned long sp, toc; asm("mr %0,1" : "=r" (sp) :); asm("mr %0,2" : "=r" (toc) :); printf("msr = "REG" sprg0= "REG"\n", mfmsr(), mfspr(SPRN_SPRG0)); printf("pvr = "REG" sprg1= "REG"\n", - mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); + mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); printf("dec = "REG" sprg2= "REG"\n", mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); @@ -1784,7 +1784,7 @@ byterev(unsigned char *val, int size) static int brev; static int mnoread; -static char *memex_help_string = +static char *memex_help_string = "Memory examine command usage:\n" "m [addr] [flags] examine/change memory\n" " addr is optional. will start where left off.\n" @@ -1799,7 +1799,7 @@ static char *memex_help_string = "NOTE: flags are saved as defaults\n" ""; -static char *memex_subcmd_help_string = +static char *memex_subcmd_help_string = "Memory examine subcommands:\n" " hexval write this val to current location\n" " 'string' write chars from string to this location\n" @@ -2065,7 +2065,7 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & (sizeof(long) - 1)) == 0 && m > 0) + if ((m & (sizeof(long) - 1)) == 0 && m > 0) putchar(' '); if (m < nr) printf("%.2x", temp[m]); @@ -2073,7 +2073,7 @@ prdump(unsigned long adrs, long ndump) printf("%s", fault_chars[fault_type]); } for (; m < 16; ++m) { - if ((m & (sizeof(long) - 1)) == 0) + if ((m & (sizeof(long) - 1)) == 0) putchar(' '); printf(" "); } @@ -2153,13 +2153,13 @@ dump_log_buf(void) unsigned char buf[128]; size_t len; - if (setjmp(bus_error_jmp) != 0) { + if (setjmp(bus_error_jmp) != 0) { printf("Error dumping printk buffer!\n"); - return; - } + return; + } - catch_memory_errors = 1; - sync(); + catch_memory_errors = 1; + sync(); kmsg_dump_rewind_nolock(&dumper); while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { @@ -2167,10 +2167,10 @@ dump_log_buf(void) printf("%s", buf); } - sync(); - /* wait a little while to see if we get a machine check */ - __delay(200); - catch_memory_errors = 0; + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; } /* -- cgit v1.2.3 From 6d9c00c67b4768105e8ae3d213484095c744eea8 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 22 Aug 2012 20:30:43 +0000 Subject: powerpc: Fix null pointer deref in perf hardware breakpoints Currently if you are doing a global perf recording with hardware breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with: Faulting instruction address: 0xc000000000738890 cpu 0xc: Vector: 300 (Data Access) at [c0000003f76af8d0] pc: c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0 lr: c000000000738830: .hw_breakpoint_handler+0x40/0x1e0 sp: c0000003f76afb50 msr: 8000000000001032 dar: 6f0 dsisr: 42000000 current = 0xc0000003f765ac00 paca = 0xc00000000f262a00 softe: 0 irq_happened: 0x01 pid = 6810, comm = loop-read enter ? for help [c0000003f76afbe0] c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0 [c0000003f76afc80] c00000000073cdbc .notify_die+0x3c/0x60 [c0000003f76afd20] c0000000000139f0 .do_dabr+0x40/0xf0 [c0000003f76afe30] c000000000005a9c handle_dabr_fault+0x14/0x48 --- Exception: 300 (Data Access) at 0000000010000480 SP (ff8679e0) is in userspace This is because we don't check to see if the break point is associated with task before we deference the task_struct pointer. This changes the update to use current. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/hw_breakpoint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f3a82dde61db..956a4c496de9 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { - bp->ctx->task->thread.last_hit_ubp = bp; + current->thread.last_hit_ubp = bp; regs->msr |= MSR_SE; goto out; } -- cgit v1.2.3 From 46c5c59e6902855b61a31be1b8e26bfffcae1e07 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 22 Aug 2012 15:35:47 +0000 Subject: powerpc/mpic_msgr: Add missing includes Add several #includes that mpic_msgr relies on being pulled implicitly, which only happens on certain configs. Signed-off-by: Scott Wood Cc: Meador Inge Cc: Jia Hongtao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mpic_msgr.h | 1 + arch/powerpc/sysdev/mpic_msgr.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 326d33ca55cd..d4f471fb1031 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -14,6 +14,7 @@ #include #include #include +#include struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 483d8fa72e8b..e961f8c4a8f0 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -14,6 +14,9 @@ #include #include #include +#include +#include +#include #include #include #include -- cgit v1.2.3 From 572b411cb4f1b208bb8ea278752f956b3554371e Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:18 +0000 Subject: powerpc/kgdb: Do not set kgdb_single_step on ppc The kgdb_single_step flag has the possibility to indefinitely hang the system on an SMP system. The x86 arch have the same problem, and that problem was fixed by commit 8097551d9ab9b9e3630(kgdb,x86: do not set kgdb_single_step on x86). This patch does the same behaviors as x86's patch. Signed-off-by: Dongdong Deng Signed-off-by: Jason Wessel Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 782bd0a3c2f0..bbabc5abb1c4 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -410,7 +410,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, #else linux_regs->msr |= MSR_SE; #endif - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } -- cgit v1.2.3 From 949616cf2d3095d1bb6b3d155c1cc963abd98b5c Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:19 +0000 Subject: powerpc/kgdb: Bail out of KGDB when we've been triggered We need to skip a breakpoint exception when it occurs after a breakpoint has already been removed. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index bbabc5abb1c4..05adb69febf4 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -101,6 +101,21 @@ static int computeSignal(unsigned int tt) return SIGHUP; /* default for things we don't know about */ } +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return kgdb_isremovedbreak(regs->nip); +} + static int kgdb_call_nmi_hook(struct pt_regs *regs) { kgdb_nmicallback(raw_smp_processor_id(), regs); -- cgit v1.2.3 From 5f630401f9e98bd062733b5bbef096dbf2158066 Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 22 Aug 2012 16:10:20 +0000 Subject: powerpc/kgdb: Restore current_thread_info properly For powerpc BooKE and e200, singlestep is handled on the critical/dbg exception stack. This causes current_thread_info() to fail for kgdb internal, so previously We work around this issue by copying the thread_info from the kernel stack before calling kgdb_handle_exception, and copying it back afterwards. But actually we don't do this properly. We should backup current_thread_info then restore that when exit. Signed-off-by: Tiejun Chen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/kgdb.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 05adb69febf4..c470a40b29f5 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * This table contains the mapping between PowerPC hardware trap types, and @@ -153,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; @@ -170,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs) thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); exception_thread_info = current_thread_info(); - if (thread_info != exception_thread_info) + if (thread_info != exception_thread_info) { + /* Save the original current_thread_info. */ + memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info); memcpy(exception_thread_info, thread_info, sizeof *thread_info); + } kgdb_handle_exception(0, SIGTRAP, 0, regs); if (thread_info != exception_thread_info) - memcpy(thread_info, exception_thread_info, sizeof *thread_info); + /* Restore current_thread_info lastly. */ + memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); return 1; } -- cgit v1.2.3 From f0f0c9ac2051e5da4afa1f3f908ace197a4de80e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 21 Aug 2012 21:22:22 +0000 Subject: powerpc: Remove unnecessary ifdefs Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/cputable.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 50d82c8a037f..b3c083de17ad 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } -#ifdef CONFIG_HAVE_HW_BREAKPOINT #define HBP_NUM 1 -#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3 From 4c374af5fdee4bc6b4f5ea96c1a0f0ad7d3566be Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Sat, 18 Aug 2012 07:34:15 +0000 Subject: powerpc/dma-iommu: Fix IOMMU window check Checking for device mask to cover the whole IOMMU table is too strict. IOMMU allocators should handle mask constraint properly for each allocation. The patch enables to use old AirPort Extreme cards on PowerMacs with more than 1GB of memory; without the patch the driver init fails with: b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000 b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask Signed-off-by: Aaro Koskinen Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dma-iommu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2d7bb8ced136..e4897523de41 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { - dev_info(dev, "Warning: IOMMU window too big for device mask\n"); - dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", - mask, (tbl->it_offset + tbl->it_size) << - IOMMU_PAGE_SHIFT); + if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", + mask, tbl->it_offset << IOMMU_PAGE_SHIFT); return 0; } else return 1; -- cgit v1.2.3 From 7256a5d2da56f2ea8ad49e8dbe9e2984f0899b42 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 13 Aug 2012 03:18:28 +0000 Subject: powerpc: Fix personality handling in ppc64_personality() Directly comparing current->personality against PER_LINUX32 doesn't work in cases when any of the personality flags stored in the top three bytes are used. Directly forcefully setting personality to PER_LINUX32 or PER_LINUX discards any flags stored in the top three bytes Use personality() macro to compare only PER_MASK bytes and make sure that we are setting only the bits that should be set, instead of overwriting the whole value. Signed-off-by: Jiri Kosina Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/syscalls.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index f2496f2faecc..4e3cc47f26b9 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality) long ret; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } #endif -- cgit v1.2.3 From dad477ccd65f05bf3b5a874e0118bf4156a1fcbb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:50:46 +0000 Subject: powerpc: POWER7 copy_to_user/copy_from_user patch applied twice "powerpc: Use enhanced touch instructions in POWER7 copy_to_user/copy_from_user" was applied twice. Remove one. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 31 ------------------------------- 1 file changed, 31 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index f9ede7c6606e..4a4a46fbad0e 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -316,37 +316,6 @@ err1; stb r0,0(r3) lis r8,0x8000 /* GO=1 */ clrldi r8,r8,32 -.machine push -.machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 - eieio - dcbt r0,r8,0b01010 /* GO */ -.machine pop - - /* - * We prefetch both the source and destination using enhanced touch - * instructions. We use a stream ID of 0 for the load side and - * 1 for the store side. - */ - clrrdi r6,r4,7 - clrrdi r9,r3,7 - ori r9,r9,1 /* stream=1 */ - - srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */ - cmpldi cr1,r7,0x3FF - ble cr1,1f - li r7,0x3FF -1: lis r0,0x0E00 /* depth=7 */ - sldi r7,r7,7 - or r7,r7,r0 - ori r10,r7,1 /* stream=1 */ - - lis r8,0x8000 /* GO=1 */ - clrldi r8,r8,32 - .machine push .machine "power4" dcbt r0,r6,0b01000 -- cgit v1.2.3 From 2fae7cdb60240e2e2d9b378afbf6d9fcce8a3890 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Tue, 7 Aug 2012 17:51:41 +0000 Subject: powerpc: Fix VMX in interrupt check in POWER7 copy loops The enhanced prefetch hint patches corrupt the condition register that was used to check if we are in interrupt. Fix this by using cr1. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copyuser_power7.S | 4 ++-- arch/powerpc/lib/memcpy_power7.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 4a4a46fbad0e..0d24ff15f5f6 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -288,7 +288,7 @@ err1; stb r0,0(r3) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_usercopy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -326,7 +326,7 @@ err1; stb r0,0(r3) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index 0efdc51bc716..7ba6c96de778 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_copy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a -- cgit v1.2.3 From 813312110bede27bffd082c25cd31730bd567beb Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Tue, 7 Aug 2012 15:07:19 +0000 Subject: powerpc/perf: Use pmc_overflow() to detect rolled back events For certain speculative events on Power7, 'perf stat' reports far higher event count than 'perf record' for the same event. As described in following commit, a performance monitor exception is raised even when the the performance events are rolled back. commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 Author: Anton Blanchard Date: Wed Mar 9 14:38:42 2011 +1100 perf_event_interrupt() records an event only when an overflow occurs. But this check for overflow is a simple 'if (val < 0)'. Because the events are rolled back, this check for overflow fails and the event is not recorded. perf_event_interrupt() later uses pmc_overflow() to detect the overflow and resets the counters and the events are lost completely. To properly detect the overflow of rolled back events, use pmc_overflow() even when recording events. To reproduce: $ cat strcpy.c #include #include main() { char buf[256]; alarm(5); while(1) strcpy(buf, "string1"); } $ perf record -e r20014 ./strcpy $ perf report -n > report.1 $ perf stat -e r20014 > report.2 # Compare report.1 and report.2 Reported-by: Maynard Johnson Signed-off-by: Sukadev Bhattiprolu Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 77b49ddda9d3..7cd2dbd6e4c4 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if ((int)val < 0) { + if (pmc_overflow(val)) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); -- cgit v1.2.3 From 2c39bf49fd05305bea6d70670855047b2191d3f5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 24 Aug 2012 20:55:55 +1000 Subject: Revert "powerpc: Update g5_defconfig" This reverts commit b1acf1bb544cf28c1f4be0a45620fa899c74b7e9. Something went horribly wrong when I did savedefconfig, not sure what, but what's in there is busted so let's revert it. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/g5_defconfig | 103 +++++++++++++++++++++++++++----------- 1 file changed, 73 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 15130066e5e2..07b7f2af2dca 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,8 +1,10 @@ +CONFIG_PPC64=y +CONFIG_ALTIVEC=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y @@ -13,15 +15,16 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_KEXEC=y -# CONFIG_RELOCATABLE is not set +# CONFIG_PPC_PSERIES is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_PMAC64=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_MIGRATION is not set CONFIG_PCI_MSI=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y @@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m -CONFIG_MACINTOSH_DRIVERS=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y CONFIG_NETDEVICES=y -CONFIG_BONDING=m CONFIG_DUMMY=m -CONFIG_MII=y +CONFIG_BONDING=m CONFIG_TUN=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SUNGEM=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_TIGON3=y CONFIG_E1000=y -CONFIG_SUNGEM=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +CONFIG_TIGON3=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_PPP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set -CONFIG_AGP=y -CONFIG_DRM=y -CONFIG_DRM_NOUVEAU=y +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_OF=y +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_POWERMAC=m +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m CONFIG_SND_USB_AUDIO=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_LOGITECH_FF=y CONFIG_HID_PANTHERLORD=y @@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_USB=y +CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y @@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y +CONFIG_INOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -221,12 +259,14 @@ CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y @@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_VIRTUALIZATION is not set -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m -- cgit v1.2.3 From 2d85b9494d10501f20ebf043f8d599e45736d78f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Jul 2012 15:26:08 +0200 Subject: ARM: mach-shmobile: armadillo800eva: Fix GPIO buttons descriptions The GPIO buttons are named SW3, SW4, SW5 and SW6 on the board silkscreen. Update the buttons descriptions accordingly. Signed-off-by: Laurent Pinchart Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856dc..a002504e3236 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -523,10 +523,10 @@ static struct platform_device hdmi_lcdc_device = { #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3"), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { -- cgit v1.2.3 From 5c1d2d16772e2d7d4e2e8da99a92d6f50b9102f0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Jul 2012 15:26:09 +0200 Subject: ARM: mach-shmobile: armadillo800eva: Enable power button as wakeup source Signed-off-by: Laurent Pinchart Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index a002504e3236..65cb7936ed9e 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -520,10 +520,11 @@ static struct platform_device hdmi_lcdc_device = { }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), -- cgit v1.2.3 From a849088aa1552b1a28eea3daff599ee22a734ae3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Aug 2012 09:03:15 +0100 Subject: ARM: Fix ioremap() of address zero Murali Nalajala reports a regression that ioremapping address zero results in an oops dump: Unable to handle kernel paging request at virtual address fa200000 pgd = d4f80000 [fa200000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-g3b5f728-00009-g638207a #13) PC is at msm_pm_config_rst_vector_before_pc+0x8/0x30 LR is at msm_pm_boot_config_before_pc+0x18/0x20 pc : [] lr : [] psr: a0000093 sp : c0837ef0 ip : cfe00000 fp : 0000000d r10: da7efc17 r9 : 225c4278 r8 : 00000006 r7 : 0003c000 r6 : c085c824 r5 : 00000001 r4 : fa101000 r3 : fa200000 r2 : c095080c r1 : 002250fc r0 : 00000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 25180059 DAC: 00000015 [] (msm_pm_config_rst_vector_before_pc+0x8/0x30) from [] (msm_pm_boot_config_before_pc+0x18/0x20) [] (msm_pm_boot_config_before_pc+0x18/0x20) from [] (msm_pm_power_collapse+0x410/0xb04) [] (msm_pm_power_collapse+0x410/0xb04) from [] (arch_idle+0x294/0x3e0) [] (arch_idle+0x294/0x3e0) from [] (default_idle+0x18/0x2c) [] (default_idle+0x18/0x2c) from [] (cpu_idle+0x90/0xe4) [] (cpu_idle+0x90/0xe4) from [] (rest_init+0x88/0xa0) [] (rest_init+0x88/0xa0) from [] (start_kernel+0x3a8/0x40c) Code: c0704256 e12fff1e e59f2020 e5923000 (e5930000) This is caused by the 'reserved' entries which we insert (see 19b52abe3c5d7 - ARM: 7438/1: fill possible PMD empty section gaps) which get matched for physical address zero. Resolve this by marking these reserved entries with a different flag. Cc: Tested-by: Murali Nalajala Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/mm.h | 3 +++ arch/arm/mm/mmu.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 6776160618ef..a8ee92da3544 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c2d0451e84a..eab94bc6f805 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) -- cgit v1.2.3 From bf8801145c01ab600f8df66e8c879ac642fa5846 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 18:55:44 +0100 Subject: ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access type From ARM debug architecture v7.1 onwards, a watchpoint exception causes the DFAR to be updated with the faulting data address. However, DFSR.WnR takes an UNKNOWN value and therefore cannot be used in general to determine the access type that triggered the watchpoint. This patch forbids watchpoints without an overflow handler from specifying a specific access type (load/store). Those with overflow handlers must be able to handle false positives potentially triggered by a watchpoint of a different access type on the same address. For SIGTRAP-based handlers (i.e. ptrace), this should have no impact. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 55 ++++++++++++++++++++++++++++++----------- 1 file changed, 40 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd94107..18d39ea4c02f 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -619,18 +625,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +729,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; -- cgit v1.2.3 From d968d2b801d877601d54e35e6dd0f52d9c797c99 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 19:02:12 +0100 Subject: ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses Breakpoint validation currently fails for single-byte watchpoints on addresses ending in 11b. There is no reason to forbid such a watchpoint, so extend the validation code to allow it. Cc: Ulrich Weigand Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/hw_breakpoint.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 18d39ea4c02f..281bf3301241 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -610,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; -- cgit v1.2.3 From dbece45894d3ab1baac15a96dc4e1e8e23f64a93 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:20:59 +0100 Subject: ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores When enabling the MMU for ARMv7 CPUs, the decompressor does not touch the ttbcr register, assuming that it will be zeroed (N == 0, EAE == 0). Given that only EAE is defined as 0 for non-secure copies of the register (and a bootloader such as kexec may leave it set to 1 anyway), we should ensure that we reset the register ourselves before turning on the MMU. This patch zeroes TTBCR.EAE and TTBCR.N prior to enabling the MMU for ARMv7 cores in the decompressor, configuring us exclusively for 32-bit translation tables via TTBR0. Cc: Acked-by: Nicolas Pitre Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b80bafc..81769c1341fa 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -659,10 +659,14 @@ __armv7_mmu_cache_on: #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register -- cgit v1.2.3 From ae3790b8a916429be5fa61da95992929e6b34d64 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:21:52 +0100 Subject: ARM: 7502/1: contextidr: avoid using bfi instruction during notifier The bfi instruction is not available on ARMv6, so instead use an and/orr sequence in the contextidr_notifier. This gets rid of the assembler error: Assembler messages: Error: selected processor does not support ARM mode `bfi r3,r2,#0,#8' Reported-by: Arnd Bergmann Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/context.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 119bc52ab93e..4e07eec1270d 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, pid = task_pid_nr(thread->task) << ASID_BITS; asm volatile( " mrc p15, 0, %0, c13, c0, 1\n" - " bfi %1, %0, #0, %2\n" - " mcr p15, 0, %1, c13, c0, 1\n" + " and %0, %0, %2\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c13, c0, 1\n" : "=r" (contextidr), "+r" (pid) - : "I" (ASID_BITS)); + : "I" (~ASID_MASK)); isb(); return NOTIFY_OK; -- cgit v1.2.3 From df547e08e800275a431e560a7f0a6b6f24ab2904 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:23:06 +0100 Subject: ARM: 7503/1: mm: only flush both pmd entries for classic MMU LPAE does not use two pmd entries for a pte, so the additional tlb flushing is not required. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/tlb.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d4664eae7..99a19512ee26 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } -- cgit v1.2.3 From 36418c516b31bff4ff949c7c618430a1a514debe Mon Sep 17 00:00:00 2001 From: Jonathan Austin Date: Thu, 23 Aug 2012 14:02:59 +0100 Subject: ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEM With !HIGHMEM, sanity_check_meminfo checks for banks that completely or partially overlap the vmalloc region. The test for partial overlap checks __va(bank->start + bank->size) > vmalloc_min. This is not appropriate if there is a non-linear translation between virtual and physical addresses, as bank->start + bank->size is actually in the bank following the one being interrogated. In most cases, even when using SPARSEMEM, this is not problematic as the subsequent bank will start at a higher va than the one in question. However if the physical to virtual address conversion is not monotonic increasing, the incorrect test could result in a bank not being truncated when it should be. This patch ensures we perform the va-pa conversion on memory from the bank we are interested in, not the following one. Reported-by: ??? (Steve) Signed-off-by: Jonathan Austin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index eab94bc6f805..c2fa21d0103e 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > vmalloc_min || - __va(bank->start + bank->size) < __va(bank->start)) { + if (__va(bank->start + bank->size - 1) >= vmalloc_min || + __va(bank->start + bank->size - 1) <= __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " "to -%.8llx (vmalloc region overlap).\n", -- cgit v1.2.3 From 4a8052d8445a24771905d71d13f917146f9e822c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 15 Aug 2012 16:28:35 +0100 Subject: ARM: 7491/1: use generic version of identical asm headers Inspired by the AArgh64 claim that it should be separate from ARM and one reason was being able to use more asm-generic headers. Doing a diff of arch/arm/include/asm and include/asm-generic there are numerous asm headers which are functionally identical to their asm-generic counterparts. Delete the ARM version and use the generic ones. Signed-off-by: Rob Herring Reviewed-by: Nicolas Pitre Tested-by: Thomas Petazzoni Reviewed-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/include/asm/Kbuild | 15 +++ arch/arm/include/asm/current.h | 15 --- arch/arm/include/asm/exec.h | 6 -- arch/arm/include/asm/ipcbuf.h | 1 - arch/arm/include/asm/msgbuf.h | 31 ------- arch/arm/include/asm/param.h | 31 ------- arch/arm/include/asm/parport.h | 18 ---- arch/arm/include/asm/segment.h | 11 --- arch/arm/include/asm/sembuf.h | 25 ----- arch/arm/include/asm/serial.h | 19 ---- arch/arm/include/asm/shmbuf.h | 42 --------- arch/arm/include/asm/socket.h | 72 --------------- arch/arm/include/asm/sockios.h | 13 --- arch/arm/include/asm/termbits.h | 198 ---------------------------------------- arch/arm/include/asm/timex.h | 6 +- arch/arm/include/asm/types.h | 16 ---- 16 files changed, 17 insertions(+), 502 deletions(-) delete mode 100644 arch/arm/include/asm/current.h delete mode 100644 arch/arm/include/asm/exec.h delete mode 100644 arch/arm/include/asm/ipcbuf.h delete mode 100644 arch/arm/include/asm/msgbuf.h delete mode 100644 arch/arm/include/asm/param.h delete mode 100644 arch/arm/include/asm/parport.h delete mode 100644 arch/arm/include/asm/segment.h delete mode 100644 arch/arm/include/asm/sembuf.h delete mode 100644 arch/arm/include/asm/serial.h delete mode 100644 arch/arm/include/asm/shmbuf.h delete mode 100644 arch/arm/include/asm/socket.h delete mode 100644 arch/arm/include/asm/sockios.h delete mode 100644 arch/arm/include/asm/termbits.h delete mode 100644 arch/arm/include/asm/types.h (limited to 'arch') diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 960abceb8e14..6cc8a13a7501 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -5,16 +5,31 @@ header-y += hwcap.h generic-y += auxvec.h generic-y += bitsperlong.h generic-y += cputime.h +generic-y += current.h generic-y += emergency-restart.h generic-y += errno.h +generic-y += exec.h generic-y += ioctl.h +generic-y += ipcbuf.h generic-y += irq_regs.h generic-y += kdebug.h generic-y += local.h generic-y += local64.h +generic-y += msgbuf.h +generic-y += param.h +generic-y += parport.h generic-y += percpu.h generic-y += poll.h generic-y += resource.h generic-y += sections.h +generic-y += segment.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += shmbuf.h generic-y += siginfo.h generic-y += sizes.h +generic-y += socket.h +generic-y += sockios.h +generic-y += termbits.h +generic-y += timex.h +generic-y += types.h diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h deleted file mode 100644 index 75d21e2a3ff7..000000000000 --- a/arch/arm/include/asm/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASMARM_CURRENT_H -#define _ASMARM_CURRENT_H - -#include - -static inline struct task_struct *get_current(void) __attribute_const__; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current (get_current()) - -#endif /* _ASMARM_CURRENT_H */ diff --git a/arch/arm/include/asm/exec.h b/arch/arm/include/asm/exec.h deleted file mode 100644 index 7c4fbef72b3a..000000000000 --- a/arch/arm/include/asm/exec.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARM_EXEC_H -#define __ASM_ARM_EXEC_H - -#define arch_align_stack(x) (x) - -#endif /* __ASM_ARM_EXEC_H */ diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51cb6d0..000000000000 --- a/arch/arm/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h deleted file mode 100644 index 33b35b946eaa..000000000000 --- a/arch/arm/include/asm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASMARM_MSGBUF_H -#define _ASMARM_MSGBUF_H - -/* - * The msqid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASMARM_MSGBUF_H */ diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h deleted file mode 100644 index 8b24bf94c06b..000000000000 --- a/arch/arm/include/asm/param.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/param.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PARAM_H -#define __ASM_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -/* max length of hostname */ -#define MAXHOSTNAMELEN 64 - -#endif - diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h deleted file mode 100644 index 26e94b09035a..000000000000 --- a/arch/arm/include/asm/parport.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/include/asm/parport.h: ARM-specific parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef __ASMARM_PARPORT_H -#define __ASMARM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports (autoirq, autodma); -} - -#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h deleted file mode 100644 index 9e24c21f6304..000000000000 --- a/arch/arm/include/asm/segment.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_ARM_SEGMENT_H -#define __ASM_ARM_SEGMENT_H - -#define __KERNEL_CS 0x0 -#define __KERNEL_DS 0x0 - -#define __USER_CS 0x1 -#define __USER_DS 0x1 - -#endif /* __ASM_ARM_SEGMENT_H */ - diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h deleted file mode 100644 index 1c0283954289..000000000000 --- a/arch/arm/include/asm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASMARM_SEMBUF_H -#define _ASMARM_SEMBUF_H - -/* - * The semid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SEMBUF_H */ diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h deleted file mode 100644 index ebb049091e26..000000000000 --- a/arch/arm/include/asm/serial.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/include/asm/serial.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 15-10-1996 RMK Created - */ - -#ifndef __ASM_SERIAL_H -#define __ASM_SERIAL_H - -#define BASE_BAUD (1843200 / 16) - -#endif diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h deleted file mode 100644 index 2e5c67ba1c97..000000000000 --- a/arch/arm/include/asm/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_SHMBUF_H -#define _ASMARM_SHMBUF_H - -/* - * The shmid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SHMBUF_H */ diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h deleted file mode 100644 index 6433cadb6ed4..000000000000 --- a/arch/arm/include/asm/socket.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef _ASMARM_SOCKET_H -#define _ASMARM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h deleted file mode 100644 index a2588a2512df..000000000000 --- a/arch/arm/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_ARM_SOCKIOS_H -#define __ARCH_ARM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h deleted file mode 100644 index 704135d28d1d..000000000000 --- a/arch/arm/include/asm/termbits.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_ARM_TERMBITS_H -#define __ASM_ARM_TERMBITS_H - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index ce119442277c..5e711722ebf4 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -15,12 +15,10 @@ #include #include -typedef unsigned long cycles_t; - #ifdef ARCH_HAS_READ_CURRENT_TIMER #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) -#else -#define get_cycles() (0) #endif +#include + #endif diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h deleted file mode 100644 index 28beab917ffc..000000000000 --- a/arch/arm/include/asm/types.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -#include - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif - -- cgit v1.2.3 From ef1c2096fcf390f2f6a6a835d9d26105e82abda5 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 15 Aug 2012 16:28:36 +0100 Subject: ARM: 7492/1: add strstr declaration for decompressors With the generic unaligned.h, more kernel headers get pulled in including dynamic_debug.h which needs strstr. As it is not really used, we only need a declaration here. Signed-off-by: Rob Herring Tested-by: Thomas Petazzoni Reviewed-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/boot/compressed/decompress.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index f41b38cafce8..9deb56a702ce 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -32,6 +32,9 @@ extern void error(char *); # define Tracecv(c,x) #endif +/* Not needed, but used in some headers pulled in by decompressors */ +extern char * strstr(const char * s1, const char *s2); + #ifdef CONFIG_KERNEL_GZIP #include "../../../../lib/decompress_inflate.c" #endif -- cgit v1.2.3 From d25c881aa3aeea447d0511e391a06c56783d173c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 15 Aug 2012 16:28:37 +0100 Subject: ARM: 7493/1: use generic unaligned.h This moves ARM over to the asm-generic/unaligned.h header. This has the benefit of better code generated especially for ARMv7 on gcc 4.7+ compilers. As Arnd Bergmann, points out: The asm-generic version uses the "struct" version for native-endian unaligned access and the "byteshift" version for the opposite endianess. The current ARM version however uses the "byteshift" implementation for both. Thanks to Nicolas Pitre for the excellent analysis: Test case: int foo (int *x) { return get_unaligned(x); } long long bar (long long *x) { return get_unaligned(x); } With the current ARM version: foo: ldrb r3, [r0, #2] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 2B], MEM[(const u8 *)x_1(D) + 2B] ldrb r1, [r0, #1] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 1B], MEM[(const u8 *)x_1(D) + 1B] ldrb r2, [r0, #0] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D)], MEM[(const u8 *)x_1(D)] mov r3, r3, asl #16 @ tmp154, MEM[(const u8 *)x_1(D) + 2B], ldrb r0, [r0, #3] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 3B], MEM[(const u8 *)x_1(D) + 3B] orr r3, r3, r1, asl #8 @, tmp155, tmp154, MEM[(const u8 *)x_1(D) + 1B], orr r3, r3, r2 @ tmp157, tmp155, MEM[(const u8 *)x_1(D)] orr r0, r3, r0, asl #24 @,, tmp157, MEM[(const u8 *)x_1(D) + 3B], bx lr @ bar: stmfd sp!, {r4, r5, r6, r7} @, mov r2, #0 @ tmp184, ldrb r5, [r0, #6] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 6B], MEM[(const u8 *)x_1(D) + 6B] ldrb r4, [r0, #5] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 5B], MEM[(const u8 *)x_1(D) + 5B] ldrb ip, [r0, #2] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 2B], MEM[(const u8 *)x_1(D) + 2B] ldrb r1, [r0, #4] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 4B], MEM[(const u8 *)x_1(D) + 4B] mov r5, r5, asl #16 @ tmp175, MEM[(const u8 *)x_1(D) + 6B], ldrb r7, [r0, #1] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 1B], MEM[(const u8 *)x_1(D) + 1B] orr r5, r5, r4, asl #8 @, tmp176, tmp175, MEM[(const u8 *)x_1(D) + 5B], ldrb r6, [r0, #7] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 7B], MEM[(const u8 *)x_1(D) + 7B] orr r5, r5, r1 @ tmp178, tmp176, MEM[(const u8 *)x_1(D) + 4B] ldrb r4, [r0, #0] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D)], MEM[(const u8 *)x_1(D)] mov ip, ip, asl #16 @ tmp188, MEM[(const u8 *)x_1(D) + 2B], ldrb r1, [r0, #3] @ zero_extendqisi2 @ MEM[(const u8 *)x_1(D) + 3B], MEM[(const u8 *)x_1(D) + 3B] orr ip, ip, r7, asl #8 @, tmp189, tmp188, MEM[(const u8 *)x_1(D) + 1B], orr r3, r5, r6, asl #24 @,, tmp178, MEM[(const u8 *)x_1(D) + 7B], orr ip, ip, r4 @ tmp191, tmp189, MEM[(const u8 *)x_1(D)] orr ip, ip, r1, asl #24 @, tmp194, tmp191, MEM[(const u8 *)x_1(D) + 3B], mov r1, r3 @, orr r0, r2, ip @ tmp171, tmp184, tmp194 ldmfd sp!, {r4, r5, r6, r7} bx lr In both cases the code is slightly suboptimal. One may wonder why wasting r2 with the constant 0 in the second case for example. And all the mov's could be folded in subsequent orr's, etc. Now with the asm-generic version: foo: ldr r0, [r0, #0] @ unaligned @,* x bx lr @ bar: mov r3, r0 @ x, x ldr r0, [r0, #0] @ unaligned @,* x ldr r1, [r3, #4] @ unaligned @, bx lr @ This is way better of course, but only because this was compiled for ARMv7. In this case the compiler knows that the hardware can do unaligned word access. This isn't that obvious for foo(), but if we remove the get_unaligned() from bar as follows: long long bar (long long *x) {return *x; } then the resulting code is: bar: ldmia r0, {r0, r1} @ x,, bx lr @ So this proves that the presumed aligned vs unaligned cases does have influence on the instructions the compiler may use and that the above unaligned code results are not just an accident. Still... this isn't fully conclusive without at least looking at the resulting assembly fron a pre ARMv6 compilation. Let's see with an ARMv5 target: foo: ldrb r3, [r0, #0] @ zero_extendqisi2 @ tmp139,* x ldrb r1, [r0, #1] @ zero_extendqisi2 @ tmp140, ldrb r2, [r0, #2] @ zero_extendqisi2 @ tmp143, ldrb r0, [r0, #3] @ zero_extendqisi2 @ tmp146, orr r3, r3, r1, asl #8 @, tmp142, tmp139, tmp140, orr r3, r3, r2, asl #16 @, tmp145, tmp142, tmp143, orr r0, r3, r0, asl #24 @,, tmp145, tmp146, bx lr @ bar: stmfd sp!, {r4, r5, r6, r7} @, ldrb r2, [r0, #0] @ zero_extendqisi2 @ tmp139,* x ldrb r7, [r0, #1] @ zero_extendqisi2 @ tmp140, ldrb r3, [r0, #4] @ zero_extendqisi2 @ tmp149, ldrb r6, [r0, #5] @ zero_extendqisi2 @ tmp150, ldrb r5, [r0, #2] @ zero_extendqisi2 @ tmp143, ldrb r4, [r0, #6] @ zero_extendqisi2 @ tmp153, ldrb r1, [r0, #7] @ zero_extendqisi2 @ tmp156, ldrb ip, [r0, #3] @ zero_extendqisi2 @ tmp146, orr r2, r2, r7, asl #8 @, tmp142, tmp139, tmp140, orr r3, r3, r6, asl #8 @, tmp152, tmp149, tmp150, orr r2, r2, r5, asl #16 @, tmp145, tmp142, tmp143, orr r3, r3, r4, asl #16 @, tmp155, tmp152, tmp153, orr r0, r2, ip, asl #24 @,, tmp145, tmp146, orr r1, r3, r1, asl #24 @,, tmp155, tmp156, ldmfd sp!, {r4, r5, r6, r7} bx lr Compared to the initial results, this is really nicely optimized and I couldn't do much better if I were to hand code it myself. Signed-off-by: Rob Herring Reviewed-by: Nicolas Pitre Tested-by: Thomas Petazzoni Reviewed-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/include/asm/Kbuild | 1 + arch/arm/include/asm/unaligned.h | 19 ------------------- 2 files changed, 1 insertion(+), 19 deletions(-) delete mode 100644 arch/arm/include/asm/unaligned.h (limited to 'arch') diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 6cc8a13a7501..a86cabf91186 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -33,3 +33,4 @@ generic-y += sockios.h generic-y += termbits.h generic-y += timex.h generic-y += types.h +generic-y += unaligned.h diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h deleted file mode 100644 index 44593a894903..000000000000 --- a/arch/arm/include/asm/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_ARM_UNALIGNED_H -#define _ASM_ARM_UNALIGNED_H - -#include -#include -#include - -/* - * Select endianness - */ -#ifndef __ARMEB__ -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le -#else -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_ARM_UNALIGNED_H */ -- cgit v1.2.3 From e780c452cfea10cbfae1c96dc16e506758138b6f Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 15 Aug 2012 16:28:38 +0100 Subject: ARM: 7494/1: use generic termios.h As pointed out by Arnd Bergmann, this fixes a couple of issues but will increase code size: The original macro user_termio_to_kernel_termios was not endian safe. It used an unsigned short ptr to access the low bits in a 32-bit word. Both user_termio_to_kernel_termios and kernel_termios_to_user_termio are missing error checking on put_user/get_user and copy_to/from_user. Signed-off-by: Rob Herring Reviewed-by: Nicolas Pitre Tested-by: Thomas Petazzoni Reviewed-by: Arnd Bergmann Signed-off-by: Russell King --- arch/arm/include/asm/Kbuild | 1 + arch/arm/include/asm/termios.h | 92 ------------------------------------------ 2 files changed, 1 insertion(+), 92 deletions(-) delete mode 100644 arch/arm/include/asm/termios.h (limited to 'arch') diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index a86cabf91186..8a7196ca5106 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -31,6 +31,7 @@ generic-y += sizes.h generic-y += socket.h generic-y += sockios.h generic-y += termbits.h +generic-y += termios.h generic-y += timex.h generic-y += types.h generic-y += unaligned.h diff --git a/arch/arm/include/asm/termios.h b/arch/arm/include/asm/termios.h deleted file mode 100644 index 293e3f1bc3f2..000000000000 --- a/arch/arm/include/asm/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ASM_ARM_TERMIOS_H -#define __ASM_ARM_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_ARM_TERMIOS_H */ -- cgit v1.2.3 From 08928e7aea930e6822ce8f1b20068bf857ecf20d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 18:43:04 +0100 Subject: ARM: 7495/1: mutex: use generic atomic_dec-based implementation for ARMv6+ Commit a76d7bd96d65 ("ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+") removed the barrier-less, ARM-specific mutex implementation in favour of the generic xchg-based code. Since then, a bug was uncovered in the xchg code when running on SMP platforms, due to interactions between the locking paths and the MUTEX_SPIN_ON_OWNER code. This was fixed in 0bce9c46bf3b ("mutex: place lock in contended state after fastpath_lock failure"), however, the atomic_dec-based mutex algorithm is now marginally more efficient for ARM (~0.5% improvement in hackbench scores on dual A15). This patch moves ARMv6+ platforms to the atomic_dec-based mutex code. Acked-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/mutex.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h index b1479fd04a95..87c044910fe0 100644 --- a/arch/arm/include/asm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -9,8 +9,13 @@ #define _ASM_MUTEX_H /* * On pre-ARMv6 hardware this results in a swp-based implementation, - * which is the most efficient. For ARMv6+, we emit a pair of exclusive - * accesses instead. + * which is the most efficient. For ARMv6+, we have exclusive memory + * accessors and use atomic_dec to avoid the extra xchg operations + * on the locking slowpaths. */ +#if __LINUX_ARM_ARCH__ < 6 #include +#else +#include #endif +#endif /* _ASM_MUTEX_H */ -- cgit v1.2.3 From e91d5d916f50ad2cf2394aba89d32833adce4303 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 22 Aug 2012 20:05:34 +0100 Subject: ARM: 7498/1: mach-shmobile: Use SGI0 to wake secondary CPUs Signed-off-by: Stephen Boyd Acked-by: Magnus Damm Signed-off-by: Russell King --- arch/arm/mach-shmobile/smp-emev2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index 6a35c4a31e6c..030558f474a4 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -82,7 +82,7 @@ int __cpuinit emev2_boot_secondary(unsigned int cpu) /* Tell ROM loader about our vector (in headsmp.S) */ emev2_set_boot_vector(__pa(shmobile_secondary_vector)); - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); return 0; } -- cgit v1.2.3 From 195bbcac2e5c12f7fb99cdcc492c3000c5537f4a Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:18:45 +0100 Subject: ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors Data aborts taken to hyp mode do not provide a valid instruction syndrome field in the HSR if the faulting instruction is a memory access using a writeback addressing mode. For hypervisors emulating MMIO accesses to virtual peripherals, taking such an exception requires disassembling the faulting instruction in order to determine the behaviour of the access. Since this requires manually walking the two stages of translation, the world must be stopped to prevent races against page aging in the guest, where the first-stage translation is invalidated after the hypervisor has translated to an IPA and the physical page is reused for something else. This patch avoids taking this heavy performance penalty when running Linux as a guest by ensuring that our I/O accessors do not make use of writeback addressing modes. Cc: Marc Zyngier Reviewed-by: Arnd Bergmann Reviewed-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/io.h | 67 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 61 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 815c669fec0a..09c4628efbe7 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -47,13 +47,68 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); -#define __raw_writeb(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v))) -#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) -#define __raw_writel(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v))) +#if __LINUX_ARM_ARCH__ < 6 +/* + * Half-word accesses are problematic with RiscPC due to limitations of + * the bus. Rather than special-case the machine, just let the compiler + * generate the access for CPUs prior to ARMv6. + */ +#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) +#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) +#else +/* + * When running under a hypervisor, we want to avoid I/O accesses with + * writeback addressing modes as these incur a significant performance + * overhead (the address generation must be emulated in software). + */ +static inline void __raw_writew(u16 val, volatile void __iomem *addr) +{ + asm volatile("strh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr) + : "r" (val)); +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 val; + asm volatile("ldrh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr), + "=r" (val)); + return val; +} +#endif -#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) -#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) -#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) +static inline void __raw_writeb(u8 val, volatile void __iomem *addr) +{ + asm volatile("strb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr) + : "r" (val)); +} + +static inline void __raw_writel(u32 val, volatile void __iomem *addr) +{ + asm volatile("str %1, %0" + : "+Qo" (*(volatile u32 __force *)addr) + : "r" (val)); +} + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 val; + asm volatile("ldrb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr), + "=r" (val)); + return val; +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 val; + asm volatile("ldr %1, %0" + : "+Qo" (*(volatile u32 __force *)addr), + "=r" (val)); + return val; +} /* * Architecture ioremap implementation. -- cgit v1.2.3 From e3e45c01ae690e65f2650e5288b9af802e95a136 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Fri, 24 Aug 2012 15:34:34 +0200 Subject: perf/x86: Fix microcode revision check for SNB-PEBS The following patch makes the microcode update code path actually invoke the perf_check_microcode() function and thus potentially renabling SNB PEBS. By default, CONFIG_MICROCODE_OLD_INTERFACE is forced to Y in arch/x86/Kconfig. There is no way to disable this. That means that the code path used in arch/x86/kernel/microcode_core.c did not include the call to perf_check_microcode(). Thus, even though the microcode was updated to a version that fixes the SNB PEBS problem, perf_event would still return EOPNOTSUPP when enabling precise sampling. This patch simply adds a call to perf_check_microcode() in the call path used when OLD_INTERFACE=y. Signed-off-by: Stephane Eranian Acked-by: Borislav Petkov Cc: peterz@infradead.org Cc: andi@firstfloor.org Link: http://lkml.kernel.org/r/20120824133434.GA8014@quad Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 4873e62db6a1..9e5bcf1e2376 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -225,6 +225,9 @@ static ssize_t microcode_write(struct file *file, const char __user *buf, if (do_microcode_update(buf, len) == 0) ret = (ssize_t)len; + if (ret > 0) + perf_check_microcode(); + mutex_unlock(µcode_mutex); put_online_cpus(); -- cgit v1.2.3 From 81ff3478d9ba7f0b48b0abef740e542fd83adf79 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 19 Jul 2012 18:28:26 +0200 Subject: oprofile, s390: Fix uninitialized memory access when writing to oprofilefs If oprofilefs_ulong_from_user() is called with count equals zero, *val remains unchanged. Depending on the implementation it might be uninitialized. Fixing users of oprofilefs_ulong_ from_user(). We missed these s390 changes with: 913050b oprofile: Fix uninitialized memory access when writing to writing to oprofilefs Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Robert Richter --- arch/s390/oprofile/init.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index a1e9d69a9c90..584b93674ea4 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -169,7 +169,7 @@ static ssize_t hw_interval_write(struct file *file, char const __user *buf, if (*offset) return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val < oprofile_min_interval) oprofile_hw_interval = oprofile_min_interval; @@ -212,7 +212,7 @@ static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0) return -EINVAL; @@ -243,7 +243,7 @@ static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -278,7 +278,7 @@ static ssize_t hwsampler_user_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -317,7 +317,7 @@ static ssize_t timer_enabled_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) -- cgit v1.2.3 From 2bd4082776ff17a0d0d565852afb422931c2f6f2 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Mon, 2 Jul 2012 12:34:30 +0800 Subject: MIPS: CMP/SMTC: Fix tc_id calculation Currently the tc_id code is: (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; After processing this becomes: (read_c0_tcbind() >> 21) & ((0xff) << 21) But it should be: (read_c0_tcbind() & ((0xff)<< 21)) >> 21 Signed-off-by: RongQing.Li Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4077/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-cmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index e7e03ecf5495..afc379ca3753 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -102,7 +102,7 @@ static void cmp_init_secondary(void) c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE; #endif #ifdef CONFIG_MIPS_MT_SMTC - c->tc_id = (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; + c->tc_id = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT; #endif } -- cgit v1.2.3 From af89fa3986b9d034a286544ab1ed95096496a2f9 Mon Sep 17 00:00:00 2001 From: Jovi Zhang Date: Wed, 22 Aug 2012 10:34:08 +0800 Subject: MIPS: mm: Add compound tail page _mapcount when mapped See commit b6999b191 which did the same modification for x86's mm/gup, Quote from commit b6999b191: "If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that." [ralf@linux-mips.org: fixed rejects caused by the original patch getting linewrapped.] Signed-off-by: Jovi Zhang Cc: Youquan Song Cc: Andi Kleen Cc: Patchwork: https://patchwork.linux-mips.org/patch/4291/ Signed-off-by: Ralf Baechle --- arch/mips/mm/gup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c index 33aadbcf170b..dcfd573871c1 100644 --- a/arch/mips/mm/gup.c +++ b/arch/mips/mm/gup.c @@ -152,6 +152,8 @@ static int gup_huge_pud(pud_t pud, unsigned long addr, unsigned long end, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; -- cgit v1.2.3 From 1d92128fe9e30c2340283361957a840f108e4abf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 26 Aug 2012 18:00:29 +0300 Subject: KVM: x86: fix KVM_GET_MSR for PV EOI KVM_GET_MSR was missing support for PV EOI, which is needed for migration. Signed-off-by: Michael S. Tsirkin Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index dce75b760312..148ed666e311 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2000,6 +2000,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata) case MSR_KVM_STEAL_TIME: data = vcpu->arch.st.msr_val; break; + case MSR_KVM_PV_EOI_EN: + data = vcpu->arch.pv_eoi.msr_val; + break; case MSR_IA32_P5_MC_ADDR: case MSR_IA32_P5_MC_TYPE: case MSR_IA32_MCG_CAP: -- cgit v1.2.3 From 29a877fa1f402ce2c1a0c52957c4e29b9bb34216 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 27 Aug 2012 15:18:45 +0200 Subject: s390/smp: add missing smp_store_status() for !SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this compile error: arch/s390/kernel/machine_kexec.c: In function ‘setup_regs’: arch/s390/kernel/machine_kexec.c:63:3: error: implicit declaration of function ‘smp_store_status’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/smp.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index a0a8340daafa..ce26ac3cb162 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -44,6 +44,7 @@ static inline void smp_call_online_cpu(void (*func)(void *), void *data) } static inline int smp_find_processor_id(int address) { return 0; } +static inline int smp_store_status(int cpu) { return 0; } static inline int smp_vcpu_scheduled(int cpu) { return 1; } static inline void smp_yield_cpu(int cpu) { } static inline void smp_yield(void) { } -- cgit v1.2.3 From e092705bcd53de3bafc3053b0b55bf83e5d6711f Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 20 Aug 2012 14:39:39 +0200 Subject: ARM: relax conditions required for enabling Contiguous Memory Allocator Contiguous Memory Allocator requires only paging and MMU enabled not particular CPU architectures, so there is no need for strict dependency on CPU type. This enables to use CMA on some older ARM v5 systems which also might need large contiguous blocks for the multimedia processing hw modules. Reported-by: Prabhakar Lad Signed-off-by: Marek Szyprowski Tested-by: Prabhakar Lad --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d6e18fee9fe..0824a91ebc26 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION -- cgit v1.2.3 From 6e5267aa543817015edb4a65c66e15f9809f92bd Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 20 Aug 2012 11:19:25 +0200 Subject: ARM: DMA-Mapping: add function for setting coherent pool size from platform code Some platforms might require to increase atomic coherent pool to make sure that their device will be able to allocate all their buffers from atomic context. This function can be also used to decrease atomic coherent pool size if coherent allocations are not used for the given sub-platform. Suggested-by: Josh Coombs Signed-off-by: Marek Szyprowski --- arch/arm/include/asm/dma-mapping.h | 7 +++++++ arch/arm/mm/dma-mapping.c | 19 ++++++++++++++++++- 2 files changed, 25 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842df4551..5c44dcb0987b 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); } +/* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + /* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4e7d1182e8a3..d1cc9c1d3566 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -267,6 +267,8 @@ static void __dma_free_remap(void *cpu_addr, size_t size) vunmap(cpu_addr); } +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K + struct dma_pool { size_t size; spinlock_t lock; @@ -277,7 +279,7 @@ struct dma_pool { }; static struct dma_pool atomic_pool = { - .size = SZ_256K, + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, }; static int __init early_coherent_pool(char *p) @@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p) } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ -- cgit v1.2.3 From fb71285f0c1633a85544784aae7577502274b77a Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 22 Aug 2012 14:50:42 +0200 Subject: ARM: DMA-Mapping: print warning when atomic coherent allocation fails Print a loud warning when system runs out of memory from atomic DMA coherent pool to let users notice the potential problem. Reported-by: Aaro Koskinen Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index d1cc9c1d3566..acced9332109 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -461,6 +461,10 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; *ret_page = pool->page + pageno; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } spin_unlock_irqrestore(&pool->lock, flags); -- cgit v1.2.3 From cb01b633eeb77ae7128cab0a3b5d3de56da6e913 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 28 Aug 2012 20:57:41 +0200 Subject: ARM: Kirkwood: increase atomic coherent pool size The default 256 KiB coherent pool may be too small for some of the Kirkwood devices, so increase it to make sure that devices will be able to allocate their buffers with GFP_ATOMIC flag. Suggested-by: Josh Coombs Signed-off-by: Marek Szyprowski Acked-by: Jason Cooper --- arch/arm/mach-kirkwood/common.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfce..d748f5033861 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; -- cgit v1.2.3 From 6b3fe47264262fa082897ebe8ae01041eae65e14 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:01 +0300 Subject: ARM: dma-mapping: atomic_pool with struct page **pages struct page **pages is necessary to align with non atomic path in __iommu_get_pages(). atomic_pool() has the intialized **pages instead of just *page. Signed-off-by: Hiroshi Doyu Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index acced9332109..9a21284a6ac4 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -275,7 +275,7 @@ struct dma_pool { unsigned long *bitmap; unsigned long nr_pages; void *vaddr; - struct page *page; + struct page **pages; }; static struct dma_pool atomic_pool = { @@ -314,6 +314,7 @@ static int __init atomic_pool_init(void) unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); @@ -321,21 +322,31 @@ static int __init atomic_pool_init(void) if (!bitmap) goto no_bitmap; + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; + if (IS_ENABLED(CONFIG_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, &page, NULL); if (ptr) { + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + spin_lock_init(&pool->lock); pool->vaddr = ptr; - pool->page = page; + pool->pages = pages; pool->bitmap = bitmap; pool->nr_pages = nr_pages; pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", (unsigned)pool->size / 1024); return 0; } +no_pages: kfree(bitmap); no_bitmap: pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", @@ -460,7 +471,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->page + pageno; + *ret_page = pool->pages[pageno]; } else { pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" "Please increase it with coherent_pool= kernel parameter!\n", -- cgit v1.2.3 From 21d0a75951ccf71f671eb24b61a8ad2b497be4b4 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:02 +0300 Subject: ARM: dma-mapping: Refactor out to introduce __in_atomic_pool Check the given range("start", "size") is included in "atomic_pool" or not. Signed-off-by: Hiroshi Doyu Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 9a21284a6ac4..882eacc6ebc1 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -482,20 +482,34 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) return ptr; } +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start > pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; +} + static int __free_from_pool(void *start, size_t size) { struct dma_pool *pool = &atomic_pool; unsigned long pageno, count; unsigned long flags; - if (start < pool->vaddr || start > pool->vaddr + pool->size) + if (!__in_atomic_pool(start, size)) return 0; - if (start + size > pool->vaddr + pool->size) { - WARN(1, "freeing wrong coherent size from pool\n"); - return 0; - } - pageno = (start - pool->vaddr) >> PAGE_SHIFT; count = size >> PAGE_SHIFT; -- cgit v1.2.3 From 665bad7bb911d392000fa69bc6b599c0df992504 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:03 +0300 Subject: ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages() Support atomic allocation in __iommu_get_pages(). Signed-off-by: Hiroshi Doyu [moved __atomic_get_pages() under #ifdef CONFIG_ARM_DMA_USE_IOMMU to avoid unused fuction warning for no-IOMMU case] Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 882eacc6ebc1..54b158df5afa 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1136,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) { struct vm_struct *area; + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) return cpu_addr; -- cgit v1.2.3 From 479ed93a4b98eef03fd8260f7ddc00019221c450 Mon Sep 17 00:00:00 2001 From: Hiroshi Doyu Date: Tue, 28 Aug 2012 08:13:04 +0300 Subject: ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC Make use of the same atomic pool as DMA does, and skip a kernel page mapping which can involve sleep'able operations at allocating a kernel page table. Signed-off-by: Hiroshi Doyu Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 54b158df5afa..051204fc4617 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1161,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1171,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1237,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { unmap_kernel_range((unsigned long)cpu_addr, size); vunmap(cpu_addr); -- cgit v1.2.3 From 497dcf6fc355f0734faf851662b6957386715d24 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 29 Aug 2012 18:58:01 -0700 Subject: ARM: shmobile: marzen: fixup smsc911x id for regulator dummy_supplies for smsc911x are registered as "smsc911x". smsc911x driver needs id = -1 Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-marzen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf4366c..fcf5a47f4772 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, -- cgit v1.2.3 From 768fd0737f4533635ea351566dff98fd4912b0d8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 28 Aug 2012 10:02:08 +0200 Subject: s390/32: Don't clobber personality flags on exec In native 32 bit mode the personality flags were not correctly inherited. This is the s390 version of 59e4c3a2 "powerpc/32: Don't clobber personality flags on exec". Reported-by: Mike Frysinger Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 32e8449640fa..9b94a160fe7f 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -180,7 +180,8 @@ extern char elf_platform[]; #define ELF_PLATFORM (elf_platform) #ifndef CONFIG_64BIT -#define SET_PERSONALITY(ex) set_personality(PER_LINUX) +#define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #else /* CONFIG_64BIT */ #define SET_PERSONALITY(ex) \ do { \ -- cgit v1.2.3 From 45caae74d238ef6583e9402cb8c550cc0b0f7dbd Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 28 Aug 2012 01:26:14 +0300 Subject: ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER Currently, omap2_sync32k_clocksource_init() function initializes the 32K timer as the system clock source regardless of the CONFIG_OMAP_32K_TIMER setting. Fix this by providing a default implementation for !CONFIG_OMAP_32K_TIMER case. Signed-off-by: Igor Grinberg Reviewed-by: Paul Walmsley Acked-by: Santosh Shilimkar Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ff6d41ec6c6..2ba4f57dda86 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -260,6 +260,7 @@ static u32 notrace dmtimer_read_sched_clock(void) return 0; } +#ifdef CONFIG_OMAP_32K_TIMER /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { @@ -299,6 +300,12 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } +#else +static inline int omap2_sync32k_clocksource_init(void) +{ + return -ENODEV; +} +#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) -- cgit v1.2.3 From 528c28f5c1cd435c45515b323919205c95342331 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 29 Aug 2012 18:24:30 +0300 Subject: ARM: OMAP: sram: fix OMAP4 errata handling OMAP4-specific code should be executed only if we are running on OMAP4. Otherwise it may break multi-OMAP kernels. Found by reading the code. Signed-off-by: Aaro Koskinen Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 766181cb5c95..85c23db25034 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -175,8 +175,10 @@ static void __init omap_map_sram(void) return; #ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { omap_sram_start += PAGE_SIZE; omap_sram_size -= SZ_16K; + } #endif if (cpu_is_omap34xx()) { /* -- cgit v1.2.3 From b285673489e39252a2c3f0c7a7d77fd28a6cda38 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 29 Aug 2012 18:24:31 +0300 Subject: ARM: OMAP: sram: skip the first 16K on OMAP3 HS In some OMAP3 HS devices (at least Nokia N9 and N950), the public SRAM seems to conflict with secure portition of SRAM. When booting the 3.6-rc3 kernel (and also earlier) on these devices, the kernel gets tainted with tons of the following warnings: [ 6.894348] In-band Error seen by MPU at address 0 [...] [ 6.894378] WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:162 Fix this by skipping the first 16K of the public SRAM. (Note that the mapping could not be changed, as it resulted in secure monitor call failure in save_secure_sram().) This will leave 12K SRAM available that should be still sufficient. The patch has been boot tested with vanilla 3.6-rc3 on N900, N950 and N9. Signed-off-by: Aaro Koskinen Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 85c23db25034..024f3b08db29 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -68,6 +68,7 @@ static unsigned long omap_sram_start; static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; @@ -106,6 +107,7 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { + omap_sram_skip = SRAM_BOOTLOADER_SZ; if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { @@ -113,6 +115,7 @@ static void __init omap_detect_sram(void) if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; } else { omap_sram_size = 0x8000; /* 32K */ } @@ -205,8 +208,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } /* @@ -220,7 +223,7 @@ void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; - available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); if (size > available) { pr_err("Not enough space in SRAM\n"); -- cgit v1.2.3 From a17fb8f520c3c662686aa54a86773f354002c7d3 Mon Sep 17 00:00:00 2001 From: Radek Pilar Date: Fri, 17 Aug 2012 18:03:43 +0200 Subject: ARM: OMAP: Config fix for omap3-touchbook board Fix inconsistency between mach-types and CONFIG_ name that prevents touchbook board from booting. Signed-off-by: Radek Pilar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 3 ++- arch/arm/mach-omap2/Makefile | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f778..0a3e1b9f1fbc 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -231,10 +231,11 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_OMAP3_TOUCHBOOK +config MACH_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f6a24b3f9c4f..34c2c7f59f0a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o -obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o +obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -- cgit v1.2.3 From ee3c843d0fc21c68ced93b982b5731178a24df68 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 8 Aug 2012 23:03:07 -0700 Subject: ARM: shmobile: armadillo800eva: fixup: sound card detection order Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa57471a5e4b8a7c2a7433eeba170d3ad92 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-armadillo800eva.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92856dc..ecd8136c5909 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -901,8 +901,8 @@ static struct platform_device *eva_devices[] __initdata = { &camera_device, &ceu0_device, &fsi_device, - &fsi_hdmi_device, &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) -- cgit v1.2.3 From e26a6038d3a902cd0bc784fc55571a83d7f9cb79 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 5 Aug 2012 22:47:00 -0700 Subject: ARM: shmobile: mackerel: fixup usb module order renesas_usbhs driver can play role as both Host and Gadget. In case of Gadget, it requires not only renesas_usbhs but also usb gadget module (like g_ether). So, renesas_usbhs driver calls usb_add_gadget_udc() on probe time. Because of this behavior, Host port plays also Gadget role if kernel has both Host/Gadget support. In mackerel case, from 0ada2da51800a4914887a9bcf22d563be80e50be (ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd) usb0 plays Gadget role, and usb1 plays Host role, and current mackerel board probes as usb1 -> usb0. Thus, 1st installed usb gadget module (like g_ether) will be assigned to usb1 (= usb Host port), and 2nd module to usb0 (= usb Gadget port). It is very confusable for user. This patch fixup usb modes probing order as usb0 -> usb1. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-mackerel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7ea2b31e3199..c129542f6aed 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, -- cgit v1.2.3 From 4fd20570995c46b08711b062c69ab903319d6041 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 30 Aug 2012 07:39:12 +0200 Subject: ARM: Kirkwood: Fix 'SZ_1M' undeclared here for db88f6281-bp-setup.c Linux-next has failed to compile for kirkwood since 23 August with: arch/arm/mach-kirkwood/db88f6281-bp-setup.c:29: error: 'SZ_1M' undeclared here (not in a function) arch/arm/mach-kirkwood/db88f6281-bp-setup.c:33: error: 'SZ_4M' undeclared here (not in a function) Add missing Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d93359379598..be90b7d0e10b 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From a67e1ce145785d884b29b17e4d82a6ecd67bb97a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 2 Sep 2012 09:17:09 +0100 Subject: ARM: Fix bad merge bd1274dc005 (Merge branch 'v6v7' into devel) Commit 774c096bf9e49 (ARM: v6/v7 cache: allow cache calls to be optimized) got dropped when the merge conflicts for moving the contents of the files in commit 753790e713d (ARM: move cache/processor/fault glue to separate include files) was fixed up in merge bd1274dc005 (Merge branch 'v6v7' into devel). This puts the change back. Signed-off-by: Russell King --- arch/arm/include/asm/glue-cache.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index 7e30874377e6..4f8d2c0dc441 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -110,19 +110,19 @@ #endif #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif +# else +# define _CACHE v6 +# endif #endif #if defined(CONFIG_CPU_V7) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif +# else +# define _CACHE v7 +# endif #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) -- cgit v1.2.3 From 28e515878f8896b33c325ff9767cb0237210fb4c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 2 Sep 2012 23:06:52 -0700 Subject: ARM: shmobile: armadillo800eva: enable rw rootfs mount armadillo800eva default boot loader is "hermit", and it's tag->u.core.flags has flag when kernel boots. Because of this, ${LINUX}/arch/arm/kernel/setup.c :: parse_tag_core() didn't remove MS_RDONLY flag from root_mountflags. Thus, the rootfs is mounted as "readonly". This patch adds "rw" kernel parameter, and enable read/write mounts for rootfs Cc: Masahiro Nakai Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/configs/armadillo800eva_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0d..90610c7030f7 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y -- cgit v1.2.3 From d5feaea364281a7e9b80b4712e790ab908d61711 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 30 Aug 2012 18:52:54 +0200 Subject: s390/mm: fix deadlock in unmap_hugepage_range() git commit cd2934a3 moved the flush_tlb_range() within __unmap_hugepage_range() inside the mm->page_table_lock, which triggered a deadlock in s390 tlb flushing code. __tlb_flush_mm_cond() also tries to acquire the mm->page_table_lock, but that is not needed because all callers already have mm->mmap_sem or mm->page_table_lock, so it can be safely removed to fix the deadlock. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/tlbflush.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 9fde315f3a7c..1d8fe2b17ef6 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -90,12 +90,10 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) static inline void __tlb_flush_mm_cond(struct mm_struct * mm) { - spin_lock(&mm->page_table_lock); if (mm->context.flush_mm) { __tlb_flush_mm(mm); mm->context.flush_mm = 0; } - spin_unlock(&mm->page_table_lock); } /* -- cgit v1.2.3 From 577650139062dcc20246da3f61e0bdafc65edf8f Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 3 Sep 2012 11:50:36 -0600 Subject: ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention With commit ae6df418a21f3a361c5f9b878e32a8aba4e17692 Sub: ARM: OMAP2+: dmtimer: cleanup fclk usage) The Timer functional clock naming convention has changed from gptX_fck => timerXfck, and so as the timer init function in mach-omap2/timer.c. OMAP4 clocktree also has changed accordingly. AM33xx Clock Tree has been merged during rc3-4 timeframe, before above commit got merged, so similar change is required for AM33xx as well (Change the gptX_fck => timerX_fck). Signed-off-by: Vaibhav Hiremath Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock33xx_data.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 25bbcc7ca4dc..ae27de8899a6 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), -- cgit v1.2.3 From bfb7dd25fcde96d08591258bc7e97500337a57ee Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 3 Sep 2012 11:50:43 -0600 Subject: ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleep Commit 4da71ae6 ("OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable") called the OMAP2xxx-specific functions for clockdomain wakeup and sleep. This would probably have broken software-supervised clockdomain wakeup and sleep on OMAP3. Signed-off-by: Paul Walmsley Cc: Rajendra Nayak Cc: Jon Hunter Acked-by: Rajendra Nayak --- arch/arm/mach-omap2/clockdomain2xxx_3xxx.c | 50 ++++++++++++++++++++++++++++-- 1 file changed, 48 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index a0d68dbecfa3..f99e65cfb862 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); } +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_add_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_del_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3_clkdm_sleep(clkdm); + } + + return 0; +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, @@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_wakeup = omap3_clkdm_wakeup, .clkdm_allow_idle = omap3_clkdm_allow_idle, .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, }; -- cgit v1.2.3 From ed733619d85262439f625cc9d8b00cdaae761070 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 3 Sep 2012 11:50:52 -0600 Subject: ARM: OMAP3: hwmod data: fix iva2 reset info IVA2 hwmod resets were missing the status bit offsets. Also, as the hwmod itself didn't have prcm info at all, resetting iva hwmod was accessing some bogus memory addresses. Added both infos to fix this. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm-regbits-34xx.h | 1 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 15 ++++++++++++--- 2 files changed, 13 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 766338fe4d34..975f6bda0e0b 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -67,6 +67,7 @@ #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_IVA2 */ +#define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_MASK (1 << 0) /* CM_IDLEST_PLL_IVA2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9e38200216b..ce7e6068768f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { /* IVA2 (IVA2) */ static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = { - { .name = "logic", .rst_shift = 0 }, - { .name = "seq0", .rst_shift = 1 }, - { .name = "seq1", .rst_shift = 2 }, + { .name = "logic", .rst_shift = 0, .st_shift = 8 }, + { .name = "seq0", .rst_shift = 1, .st_shift = 9 }, + { .name = "seq1", .rst_shift = 2, .st_shift = 10 }, }; static struct omap_hwmod omap3xxx_iva_hwmod = { @@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .rst_lines = omap3xxx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets), .main_clk = "iva2_ck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_IVA2_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, + } + }, }; /* timer class */ -- cgit v1.2.3 From 471a009b6db7670299a8674cd7fb2557c8c2797f Mon Sep 17 00:00:00 2001 From: Misael Lopez Cruz Date: Mon, 3 Sep 2012 11:50:52 -0600 Subject: ARM: OMAP: hwmod code: Disable module when hwmod enable fails Clock and module mode are explictly enable when hwmod is enabled. But if the hwmod doesn't get ready on time, clocks are disabled but module is left enabled. Signed-off-by: Misael Lopez Cruz Signed-off-by: Rajendra Nayak Cc: Paul Walmsley Cc: Benoit Cousson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e519968d..37afbd173c2c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { + _omap4_disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); -- cgit v1.2.3 From b360124ea008fcccf440840bde2c7f317bc31509 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 3 Sep 2012 11:50:53 -0600 Subject: ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP block MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The OMAP4 sl2if IP block requires some special programming for it to enter idle. Without this programming, it will prevent the rest of the chip from entering full chip idle. This patch comments out the IP block data. Later, once the appropriate support is available, this patch can be reverted. Cc: Paul Walmsley Cc: Benoît Cousson Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 242aee498ceb..afb60917a948 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4210,7 +4210,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { }; /* dsp -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { .master = &omap44xx_dsp_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -4828,7 +4828,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { }; /* iva -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = { .master = &omap44xx_iva_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -5362,7 +5362,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { }; /* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "l3_div_ck", @@ -6032,7 +6032,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__dmic, &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, - &omap44xx_dsp__sl2if, + /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, &omap44xx_l3_main_2__dss, &omap44xx_l4_per__dss, @@ -6068,7 +6068,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, - &omap44xx_iva__sl2if, + /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, &omap44xx_l4_cfg__mailbox, @@ -6099,7 +6099,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__cm_core, &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, - &omap44xx_l3_main_2__sl2if, + /* &omap44xx_l3_main_2__sl2if, */ &omap44xx_l4_abe__slimbus1, &omap44xx_l4_abe__slimbus1_dma, &omap44xx_l4_per__slimbus2, -- cgit v1.2.3 From aa783b6fd60b3844e199b1c2d2f4068f3caa1358 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 1 Sep 2012 03:00:15 +0100 Subject: ARM: 7505/1: split out ATAGS parsing Make ATAGS parsing into a source file of its own, namely atags_parse.c. Also rename compat.c to atags_compat.c to make it clearer what it is about. Same for atags.c which is now atags_proc.c. Gather all the atags function declarations into a common atags.h. Signed-off-by: Nicolas Pitre Tested-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/kernel/Makefile | 6 +- arch/arm/kernel/atags.c | 83 -------------- arch/arm/kernel/atags.h | 3 + arch/arm/kernel/atags_compat.c | 219 +++++++++++++++++++++++++++++++++++++ arch/arm/kernel/atags_parse.c | 238 +++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/atags_proc.c | 83 ++++++++++++++ arch/arm/kernel/compat.c | 219 ------------------------------------- arch/arm/kernel/compat.h | 11 -- arch/arm/kernel/setup.c | 236 +--------------------------------------- 9 files changed, 547 insertions(+), 551 deletions(-) delete mode 100644 arch/arm/kernel/atags.c create mode 100644 arch/arm/kernel/atags_compat.c create mode 100644 arch/arm/kernel/atags_parse.c create mode 100644 arch/arm/kernel/atags_proc.c delete mode 100644 arch/arm/kernel/compat.c delete mode 100644 arch/arm/kernel/compat.h (limited to 'arch') diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 7ad2d5cf7008..086c9d3bc360 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -15,11 +15,11 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ +obj-y := atags_parse.o elf.o entry-armv.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o -obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o +obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_OC_ETM) += etm.o @@ -52,7 +52,7 @@ test-kprobes-objs += kprobes-test-thumb.o else test-kprobes-objs += kprobes-test-arm.o endif -obj-$(CONFIG_ATAGS_PROC) += atags.o +obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c deleted file mode 100644 index 42a1a1415fa6..000000000000 --- a/arch/arm/kernel/atags.c +++ /dev/null @@ -1,83 +0,0 @@ -#include -#include -#include -#include -#include - -struct buffer { - size_t size; - char data[]; -}; - -static int -read_buffer(char* page, char** start, off_t off, int count, - int* eof, void* data) -{ - struct buffer *buffer = (struct buffer *)data; - - if (off >= buffer->size) { - *eof = 1; - return 0; - } - - count = min((int) (buffer->size - off), count); - - memcpy(page, &buffer->data[off], count); - - return count; -} - -#define BOOT_PARAMS_SIZE 1536 -static char __initdata atags_copy[BOOT_PARAMS_SIZE]; - -void __init save_atags(const struct tag *tags) -{ - memcpy(atags_copy, tags, sizeof(atags_copy)); -} - -static int __init init_atags_procfs(void) -{ - /* - * This cannot go into save_atags() because kmalloc and proc don't work - * yet when it is called. - */ - struct proc_dir_entry *tags_entry; - struct tag *tag = (struct tag *)atags_copy; - struct buffer *b; - size_t size; - - if (tag->hdr.tag != ATAG_CORE) { - printk(KERN_INFO "No ATAGs?"); - return -EINVAL; - } - - for (; tag->hdr.size; tag = tag_next(tag)) - ; - - /* include the terminating ATAG_NONE */ - size = (char *)tag - atags_copy + sizeof(struct tag_header); - - WARN_ON(tag->hdr.tag != ATAG_NONE); - - b = kmalloc(sizeof(*b) + size, GFP_KERNEL); - if (!b) - goto nomem; - - b->size = size; - memcpy(b->data, atags_copy, size); - - tags_entry = create_proc_read_entry("atags", 0400, - NULL, read_buffer, b); - - if (!tags_entry) - goto nomem; - - return 0; - -nomem: - kfree(b); - printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); - - return -ENOMEM; -} -arch_initcall(init_atags_procfs); diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index e5f028d214a1..a888fdd381b5 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -3,3 +3,6 @@ extern void save_atags(struct tag *tags); #else static inline void save_atags(struct tag *tags) { } #endif + +void convert_to_tag_list(struct tag *tags); +struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr); diff --git a/arch/arm/kernel/atags_compat.c b/arch/arm/kernel/atags_compat.c new file mode 100644 index 000000000000..5236ad38f417 --- /dev/null +++ b/arch/arm/kernel/atags_compat.c @@ -0,0 +1,219 @@ +/* + * linux/arch/arm/kernel/atags_compat.c + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * We keep the old params compatibility cruft in one place (here) + * so we don't end up with lots of mess around other places. + * + * NOTE: + * The old struct param_struct is deprecated, but it will be kept in + * the kernel for 5 years from now (2001). This will allow boot loaders + * to convert to the new struct tag way. + */ +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "atags.h" + +/* + * Usage: + * - do not go blindly adding fields, add them at the end + * - when adding fields, don't rely on the address until + * a patch from me has been released + * - unused fields should be zero (for future expansion) + * - this structure is relatively short-lived - only + * guaranteed to contain useful data in setup_arch() + * + * This is the old deprecated way to pass parameters to the kernel + */ +struct param_struct { + union { + struct { + unsigned long page_size; /* 0 */ + unsigned long nr_pages; /* 4 */ + unsigned long ramdisk_size; /* 8 */ + unsigned long flags; /* 12 */ +#define FLAG_READONLY 1 +#define FLAG_RDLOAD 4 +#define FLAG_RDPROMPT 8 + unsigned long rootdev; /* 16 */ + unsigned long video_num_cols; /* 20 */ + unsigned long video_num_rows; /* 24 */ + unsigned long video_x; /* 28 */ + unsigned long video_y; /* 32 */ + unsigned long memc_control_reg; /* 36 */ + unsigned char sounddefault; /* 40 */ + unsigned char adfsdrives; /* 41 */ + unsigned char bytes_per_char_h; /* 42 */ + unsigned char bytes_per_char_v; /* 43 */ + unsigned long pages_in_bank[4]; /* 44 */ + unsigned long pages_in_vram; /* 60 */ + unsigned long initrd_start; /* 64 */ + unsigned long initrd_size; /* 68 */ + unsigned long rd_start; /* 72 */ + unsigned long system_rev; /* 76 */ + unsigned long system_serial_low; /* 80 */ + unsigned long system_serial_high; /* 84 */ + unsigned long mem_fclk_21285; /* 88 */ + } s; + char unused[256]; + } u1; + union { + char paths[8][128]; + struct { + unsigned long magic; + char n[1024 - sizeof(unsigned long)]; + } s; + } u2; + char commandline[COMMAND_LINE_SIZE]; +}; + +static struct tag * __init memtag(struct tag *tag, unsigned long start, unsigned long size) +{ + tag = tag_next(tag); + tag->hdr.tag = ATAG_MEM; + tag->hdr.size = tag_size(tag_mem32); + tag->u.mem.size = size; + tag->u.mem.start = start; + + return tag; +} + +static void __init build_tag_list(struct param_struct *params, void *taglist) +{ + struct tag *tag = taglist; + + if (params->u1.s.page_size != PAGE_SIZE) { + printk(KERN_WARNING "Warning: bad configuration page, " + "trying to continue\n"); + return; + } + + printk(KERN_DEBUG "Converting old-style param struct to taglist\n"); + +#ifdef CONFIG_ARCH_NETWINDER + if (params->u1.s.nr_pages != 0x02000 && + params->u1.s.nr_pages != 0x04000 && + params->u1.s.nr_pages != 0x08000 && + params->u1.s.nr_pages != 0x10000) { + printk(KERN_WARNING "Warning: bad NeTTrom parameters " + "detected, using defaults\n"); + + params->u1.s.nr_pages = 0x1000; /* 16MB */ + params->u1.s.ramdisk_size = 0; + params->u1.s.flags = FLAG_READONLY; + params->u1.s.initrd_start = 0; + params->u1.s.initrd_size = 0; + params->u1.s.rd_start = 0; + } +#endif + + tag->hdr.tag = ATAG_CORE; + tag->hdr.size = tag_size(tag_core); + tag->u.core.flags = params->u1.s.flags & FLAG_READONLY; + tag->u.core.pagesize = params->u1.s.page_size; + tag->u.core.rootdev = params->u1.s.rootdev; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_RAMDISK; + tag->hdr.size = tag_size(tag_ramdisk); + tag->u.ramdisk.flags = (params->u1.s.flags & FLAG_RDLOAD ? 1 : 0) | + (params->u1.s.flags & FLAG_RDPROMPT ? 2 : 0); + tag->u.ramdisk.size = params->u1.s.ramdisk_size; + tag->u.ramdisk.start = params->u1.s.rd_start; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_INITRD; + tag->hdr.size = tag_size(tag_initrd); + tag->u.initrd.start = params->u1.s.initrd_start; + tag->u.initrd.size = params->u1.s.initrd_size; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_SERIAL; + tag->hdr.size = tag_size(tag_serialnr); + tag->u.serialnr.low = params->u1.s.system_serial_low; + tag->u.serialnr.high = params->u1.s.system_serial_high; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_REVISION; + tag->hdr.size = tag_size(tag_revision); + tag->u.revision.rev = params->u1.s.system_rev; + +#ifdef CONFIG_ARCH_ACORN + if (machine_is_riscpc()) { + int i; + for (i = 0; i < 4; i++) + tag = memtag(tag, PHYS_OFFSET + (i << 26), + params->u1.s.pages_in_bank[i] * PAGE_SIZE); + } else +#endif + tag = memtag(tag, PHYS_OFFSET, params->u1.s.nr_pages * PAGE_SIZE); + +#ifdef CONFIG_FOOTBRIDGE + if (params->u1.s.mem_fclk_21285) { + tag = tag_next(tag); + tag->hdr.tag = ATAG_MEMCLK; + tag->hdr.size = tag_size(tag_memclk); + tag->u.memclk.fmemclk = params->u1.s.mem_fclk_21285; + } +#endif + +#ifdef CONFIG_ARCH_EBSA285 + if (machine_is_ebsa285()) { + tag = tag_next(tag); + tag->hdr.tag = ATAG_VIDEOTEXT; + tag->hdr.size = tag_size(tag_videotext); + tag->u.videotext.x = params->u1.s.video_x; + tag->u.videotext.y = params->u1.s.video_y; + tag->u.videotext.video_page = 0; + tag->u.videotext.video_mode = 0; + tag->u.videotext.video_cols = params->u1.s.video_num_cols; + tag->u.videotext.video_ega_bx = 0; + tag->u.videotext.video_lines = params->u1.s.video_num_rows; + tag->u.videotext.video_isvga = 1; + tag->u.videotext.video_points = 8; + } +#endif + +#ifdef CONFIG_ARCH_ACORN + tag = tag_next(tag); + tag->hdr.tag = ATAG_ACORN; + tag->hdr.size = tag_size(tag_acorn); + tag->u.acorn.memc_control_reg = params->u1.s.memc_control_reg; + tag->u.acorn.vram_pages = params->u1.s.pages_in_vram; + tag->u.acorn.sounddefault = params->u1.s.sounddefault; + tag->u.acorn.adfsdrives = params->u1.s.adfsdrives; +#endif + + tag = tag_next(tag); + tag->hdr.tag = ATAG_CMDLINE; + tag->hdr.size = (strlen(params->commandline) + 3 + + sizeof(struct tag_header)) >> 2; + strcpy(tag->u.cmdline.cmdline, params->commandline); + + tag = tag_next(tag); + tag->hdr.tag = ATAG_NONE; + tag->hdr.size = 0; + + memmove(params, taglist, ((int)tag) - ((int)taglist) + + sizeof(struct tag_header)); +} + +void __init convert_to_tag_list(struct tag *tags) +{ + struct param_struct *params = (struct param_struct *)tags; + build_tag_list(params, ¶ms->u2); +} diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c new file mode 100644 index 000000000000..14512e6931d8 --- /dev/null +++ b/arch/arm/kernel/atags_parse.c @@ -0,0 +1,238 @@ +/* + * Tag parsing. + * + * Copyright (C) 1995-2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This is the traditional way of passing data to the kernel at boot time. Rather + * than passing a fixed inflexible structure to the kernel, we pass a list + * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE + * tag for the list to be recognised (to distinguish the tagged list from + * a param_struct). The list is terminated with a zero-length tag (this tag + * is not parsed in any way). + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "atags.h" + +static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; + +#ifndef MEM_SIZE +#define MEM_SIZE (16*1024*1024) +#endif + +static struct { + struct tag_header hdr1; + struct tag_core core; + struct tag_header hdr2; + struct tag_mem32 mem; + struct tag_header hdr3; +} default_tags __initdata = { + { tag_size(tag_core), ATAG_CORE }, + { 1, PAGE_SIZE, 0xff }, + { tag_size(tag_mem32), ATAG_MEM }, + { MEM_SIZE }, + { 0, ATAG_NONE } +}; + +static int __init parse_tag_core(const struct tag *tag) +{ + if (tag->hdr.size > 2) { + if ((tag->u.core.flags & 1) == 0) + root_mountflags &= ~MS_RDONLY; + ROOT_DEV = old_decode_dev(tag->u.core.rootdev); + } + return 0; +} + +__tagtable(ATAG_CORE, parse_tag_core); + +static int __init parse_tag_mem32(const struct tag *tag) +{ + return arm_add_memory(tag->u.mem.start, tag->u.mem.size); +} + +__tagtable(ATAG_MEM, parse_tag_mem32); + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) +static int __init parse_tag_videotext(const struct tag *tag) +{ + screen_info.orig_x = tag->u.videotext.x; + screen_info.orig_y = tag->u.videotext.y; + screen_info.orig_video_page = tag->u.videotext.video_page; + screen_info.orig_video_mode = tag->u.videotext.video_mode; + screen_info.orig_video_cols = tag->u.videotext.video_cols; + screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; + screen_info.orig_video_lines = tag->u.videotext.video_lines; + screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; + screen_info.orig_video_points = tag->u.videotext.video_points; + return 0; +} + +__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); +#endif + +#ifdef CONFIG_BLK_DEV_RAM +static int __init parse_tag_ramdisk(const struct tag *tag) +{ + extern int rd_size, rd_image_start, rd_prompt, rd_doload; + + rd_image_start = tag->u.ramdisk.start; + rd_doload = (tag->u.ramdisk.flags & 1) == 0; + rd_prompt = (tag->u.ramdisk.flags & 2) == 0; + + if (tag->u.ramdisk.size) + rd_size = tag->u.ramdisk.size; + + return 0; +} + +__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); +#endif + +static int __init parse_tag_serialnr(const struct tag *tag) +{ + system_serial_low = tag->u.serialnr.low; + system_serial_high = tag->u.serialnr.high; + return 0; +} + +__tagtable(ATAG_SERIAL, parse_tag_serialnr); + +static int __init parse_tag_revision(const struct tag *tag) +{ + system_rev = tag->u.revision.rev; + return 0; +} + +__tagtable(ATAG_REVISION, parse_tag_revision); + +static int __init parse_tag_cmdline(const struct tag *tag) +{ +#if defined(CONFIG_CMDLINE_EXTEND) + strlcat(default_command_line, " ", COMMAND_LINE_SIZE); + strlcat(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#elif defined(CONFIG_CMDLINE_FORCE) + pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); +#else + strlcpy(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#endif + return 0; +} + +__tagtable(ATAG_CMDLINE, parse_tag_cmdline); + +/* + * Scan the tag table for this tag, and call its parse function. + * The tag table is built by the linker from all the __tagtable + * declarations. + */ +static int __init parse_tag(const struct tag *tag) +{ + extern struct tagtable __tagtable_begin, __tagtable_end; + struct tagtable *t; + + for (t = &__tagtable_begin; t < &__tagtable_end; t++) + if (tag->hdr.tag == t->tag) { + t->parse(tag); + break; + } + + return t < &__tagtable_end; +} + +/* + * Parse all tags in the list, checking both the global and architecture + * specific tag tables. + */ +static void __init parse_tags(const struct tag *t) +{ + for (; t->hdr.size; t = tag_next(t)) + if (!parse_tag(t)) + printk(KERN_WARNING + "Ignoring unrecognised tag 0x%08x\n", + t->hdr.tag); +} + +static void __init squash_mem_tags(struct tag *tag) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM) + tag->hdr.tag = ATAG_NONE; +} + +struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer, + unsigned int machine_nr) +{ + struct tag *tags = (struct tag *)&default_tags; + struct machine_desc *mdesc = NULL, *p; + char *from = default_command_line; + + default_tags.mem.start = PHYS_OFFSET; + + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (machine_nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } + + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", machine_nr); + dump_machine_table(); /* does not return */ + } + + if (__atags_pointer) + tags = phys_to_virt(__atags_pointer); + else if (mdesc->atag_offset) + tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); + +#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) + /* + * If we have the old style parameters, convert them to + * a tag list. + */ + if (tags->hdr.tag != ATAG_CORE) + convert_to_tag_list(tags); +#endif + if (tags->hdr.tag != ATAG_CORE) { + early_print("Warning: Neither atags nor dtb found\n"); + tags = (struct tag *)&default_tags; + } + + if (mdesc->fixup) + mdesc->fixup(tags, &from, &meminfo); + + if (tags->hdr.tag == ATAG_CORE) { + if (meminfo.nr_banks != 0) + squash_mem_tags(tags); + save_atags(tags); + parse_tags(tags); + } + + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c new file mode 100644 index 000000000000..42a1a1415fa6 --- /dev/null +++ b/arch/arm/kernel/atags_proc.c @@ -0,0 +1,83 @@ +#include +#include +#include +#include +#include + +struct buffer { + size_t size; + char data[]; +}; + +static int +read_buffer(char* page, char** start, off_t off, int count, + int* eof, void* data) +{ + struct buffer *buffer = (struct buffer *)data; + + if (off >= buffer->size) { + *eof = 1; + return 0; + } + + count = min((int) (buffer->size - off), count); + + memcpy(page, &buffer->data[off], count); + + return count; +} + +#define BOOT_PARAMS_SIZE 1536 +static char __initdata atags_copy[BOOT_PARAMS_SIZE]; + +void __init save_atags(const struct tag *tags) +{ + memcpy(atags_copy, tags, sizeof(atags_copy)); +} + +static int __init init_atags_procfs(void) +{ + /* + * This cannot go into save_atags() because kmalloc and proc don't work + * yet when it is called. + */ + struct proc_dir_entry *tags_entry; + struct tag *tag = (struct tag *)atags_copy; + struct buffer *b; + size_t size; + + if (tag->hdr.tag != ATAG_CORE) { + printk(KERN_INFO "No ATAGs?"); + return -EINVAL; + } + + for (; tag->hdr.size; tag = tag_next(tag)) + ; + + /* include the terminating ATAG_NONE */ + size = (char *)tag - atags_copy + sizeof(struct tag_header); + + WARN_ON(tag->hdr.tag != ATAG_NONE); + + b = kmalloc(sizeof(*b) + size, GFP_KERNEL); + if (!b) + goto nomem; + + b->size = size; + memcpy(b->data, atags_copy, size); + + tags_entry = create_proc_read_entry("atags", 0400, + NULL, read_buffer, b); + + if (!tags_entry) + goto nomem; + + return 0; + +nomem: + kfree(b); + printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); + + return -ENOMEM; +} +arch_initcall(init_atags_procfs); diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c deleted file mode 100644 index 925652318b8b..000000000000 --- a/arch/arm/kernel/compat.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * linux/arch/arm/kernel/compat.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * We keep the old params compatibility cruft in one place (here) - * so we don't end up with lots of mess around other places. - * - * NOTE: - * The old struct param_struct is deprecated, but it will be kept in - * the kernel for 5 years from now (2001). This will allow boot loaders - * to convert to the new struct tag way. - */ -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include "compat.h" - -/* - * Usage: - * - do not go blindly adding fields, add them at the end - * - when adding fields, don't rely on the address until - * a patch from me has been released - * - unused fields should be zero (for future expansion) - * - this structure is relatively short-lived - only - * guaranteed to contain useful data in setup_arch() - * - * This is the old deprecated way to pass parameters to the kernel - */ -struct param_struct { - union { - struct { - unsigned long page_size; /* 0 */ - unsigned long nr_pages; /* 4 */ - unsigned long ramdisk_size; /* 8 */ - unsigned long flags; /* 12 */ -#define FLAG_READONLY 1 -#define FLAG_RDLOAD 4 -#define FLAG_RDPROMPT 8 - unsigned long rootdev; /* 16 */ - unsigned long video_num_cols; /* 20 */ - unsigned long video_num_rows; /* 24 */ - unsigned long video_x; /* 28 */ - unsigned long video_y; /* 32 */ - unsigned long memc_control_reg; /* 36 */ - unsigned char sounddefault; /* 40 */ - unsigned char adfsdrives; /* 41 */ - unsigned char bytes_per_char_h; /* 42 */ - unsigned char bytes_per_char_v; /* 43 */ - unsigned long pages_in_bank[4]; /* 44 */ - unsigned long pages_in_vram; /* 60 */ - unsigned long initrd_start; /* 64 */ - unsigned long initrd_size; /* 68 */ - unsigned long rd_start; /* 72 */ - unsigned long system_rev; /* 76 */ - unsigned long system_serial_low; /* 80 */ - unsigned long system_serial_high; /* 84 */ - unsigned long mem_fclk_21285; /* 88 */ - } s; - char unused[256]; - } u1; - union { - char paths[8][128]; - struct { - unsigned long magic; - char n[1024 - sizeof(unsigned long)]; - } s; - } u2; - char commandline[COMMAND_LINE_SIZE]; -}; - -static struct tag * __init memtag(struct tag *tag, unsigned long start, unsigned long size) -{ - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEM; - tag->hdr.size = tag_size(tag_mem32); - tag->u.mem.size = size; - tag->u.mem.start = start; - - return tag; -} - -static void __init build_tag_list(struct param_struct *params, void *taglist) -{ - struct tag *tag = taglist; - - if (params->u1.s.page_size != PAGE_SIZE) { - printk(KERN_WARNING "Warning: bad configuration page, " - "trying to continue\n"); - return; - } - - printk(KERN_DEBUG "Converting old-style param struct to taglist\n"); - -#ifdef CONFIG_ARCH_NETWINDER - if (params->u1.s.nr_pages != 0x02000 && - params->u1.s.nr_pages != 0x04000 && - params->u1.s.nr_pages != 0x08000 && - params->u1.s.nr_pages != 0x10000) { - printk(KERN_WARNING "Warning: bad NeTTrom parameters " - "detected, using defaults\n"); - - params->u1.s.nr_pages = 0x1000; /* 16MB */ - params->u1.s.ramdisk_size = 0; - params->u1.s.flags = FLAG_READONLY; - params->u1.s.initrd_start = 0; - params->u1.s.initrd_size = 0; - params->u1.s.rd_start = 0; - } -#endif - - tag->hdr.tag = ATAG_CORE; - tag->hdr.size = tag_size(tag_core); - tag->u.core.flags = params->u1.s.flags & FLAG_READONLY; - tag->u.core.pagesize = params->u1.s.page_size; - tag->u.core.rootdev = params->u1.s.rootdev; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_RAMDISK; - tag->hdr.size = tag_size(tag_ramdisk); - tag->u.ramdisk.flags = (params->u1.s.flags & FLAG_RDLOAD ? 1 : 0) | - (params->u1.s.flags & FLAG_RDPROMPT ? 2 : 0); - tag->u.ramdisk.size = params->u1.s.ramdisk_size; - tag->u.ramdisk.start = params->u1.s.rd_start; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_INITRD; - tag->hdr.size = tag_size(tag_initrd); - tag->u.initrd.start = params->u1.s.initrd_start; - tag->u.initrd.size = params->u1.s.initrd_size; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_SERIAL; - tag->hdr.size = tag_size(tag_serialnr); - tag->u.serialnr.low = params->u1.s.system_serial_low; - tag->u.serialnr.high = params->u1.s.system_serial_high; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_REVISION; - tag->hdr.size = tag_size(tag_revision); - tag->u.revision.rev = params->u1.s.system_rev; - -#ifdef CONFIG_ARCH_ACORN - if (machine_is_riscpc()) { - int i; - for (i = 0; i < 4; i++) - tag = memtag(tag, PHYS_OFFSET + (i << 26), - params->u1.s.pages_in_bank[i] * PAGE_SIZE); - } else -#endif - tag = memtag(tag, PHYS_OFFSET, params->u1.s.nr_pages * PAGE_SIZE); - -#ifdef CONFIG_FOOTBRIDGE - if (params->u1.s.mem_fclk_21285) { - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEMCLK; - tag->hdr.size = tag_size(tag_memclk); - tag->u.memclk.fmemclk = params->u1.s.mem_fclk_21285; - } -#endif - -#ifdef CONFIG_ARCH_EBSA285 - if (machine_is_ebsa285()) { - tag = tag_next(tag); - tag->hdr.tag = ATAG_VIDEOTEXT; - tag->hdr.size = tag_size(tag_videotext); - tag->u.videotext.x = params->u1.s.video_x; - tag->u.videotext.y = params->u1.s.video_y; - tag->u.videotext.video_page = 0; - tag->u.videotext.video_mode = 0; - tag->u.videotext.video_cols = params->u1.s.video_num_cols; - tag->u.videotext.video_ega_bx = 0; - tag->u.videotext.video_lines = params->u1.s.video_num_rows; - tag->u.videotext.video_isvga = 1; - tag->u.videotext.video_points = 8; - } -#endif - -#ifdef CONFIG_ARCH_ACORN - tag = tag_next(tag); - tag->hdr.tag = ATAG_ACORN; - tag->hdr.size = tag_size(tag_acorn); - tag->u.acorn.memc_control_reg = params->u1.s.memc_control_reg; - tag->u.acorn.vram_pages = params->u1.s.pages_in_vram; - tag->u.acorn.sounddefault = params->u1.s.sounddefault; - tag->u.acorn.adfsdrives = params->u1.s.adfsdrives; -#endif - - tag = tag_next(tag); - tag->hdr.tag = ATAG_CMDLINE; - tag->hdr.size = (strlen(params->commandline) + 3 + - sizeof(struct tag_header)) >> 2; - strcpy(tag->u.cmdline.cmdline, params->commandline); - - tag = tag_next(tag); - tag->hdr.tag = ATAG_NONE; - tag->hdr.size = 0; - - memmove(params, taglist, ((int)tag) - ((int)taglist) + - sizeof(struct tag_header)); -} - -void __init convert_to_tag_list(struct tag *tags) -{ - struct param_struct *params = (struct param_struct *)tags; - build_tag_list(params, ¶ms->u2); -} diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h deleted file mode 100644 index 39264ab1b9c6..000000000000 --- a/arch/arm/kernel/compat.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/arch/arm/kernel/compat.h - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void convert_to_tag_list(struct tag *tags); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index a81dcecc7343..0785472460a8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -21,11 +21,9 @@ #include #include #include -#include #include #include #include -#include #include #include #include @@ -56,15 +54,9 @@ #include #include -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) -#include "compat.h" -#endif #include "atags.h" #include "tcm.h" -#ifndef MEM_SIZE -#define MEM_SIZE (16*1024*1024) -#endif #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE) char fpe_type[8]; @@ -145,7 +137,6 @@ static const char *machine_name; static char __initdata cmd_line[COMMAND_LINE_SIZE]; struct machine_desc *machine_desc __initdata; -static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } }; #define ENDIANNESS ((char)endian_test.l) @@ -583,21 +574,6 @@ static int __init early_mem(char *p) } early_param("mem", early_mem); -static void __init -setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz) -{ -#ifdef CONFIG_BLK_DEV_RAM - extern int rd_size, rd_image_start, rd_prompt, rd_doload; - - rd_image_start = image_start; - rd_prompt = prompt; - rd_doload = doload; - - if (rd_sz) - rd_size = rd_sz; -#endif -} - static void __init request_standard_resources(struct machine_desc *mdesc) { struct memblock_region *region; @@ -643,35 +619,6 @@ static void __init request_standard_resources(struct machine_desc *mdesc) request_resource(&ioport_resource, &lp2); } -/* - * Tag parsing. - * - * This is the new way of passing data to the kernel at boot time. Rather - * than passing a fixed inflexible structure to the kernel, we pass a list - * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE - * tag for the list to be recognised (to distinguish the tagged list from - * a param_struct). The list is terminated with a zero-length tag (this tag - * is not parsed in any way). - */ -static int __init parse_tag_core(const struct tag *tag) -{ - if (tag->hdr.size > 2) { - if ((tag->u.core.flags & 1) == 0) - root_mountflags &= ~MS_RDONLY; - ROOT_DEV = old_decode_dev(tag->u.core.rootdev); - } - return 0; -} - -__tagtable(ATAG_CORE, parse_tag_core); - -static int __init parse_tag_mem32(const struct tag *tag) -{ - return arm_add_memory(tag->u.mem.start, tag->u.mem.size); -} - -__tagtable(ATAG_MEM, parse_tag_mem32); - #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) struct screen_info screen_info = { .orig_video_lines = 30, @@ -681,117 +628,8 @@ struct screen_info screen_info = { .orig_video_isVGA = 1, .orig_video_points = 8 }; - -static int __init parse_tag_videotext(const struct tag *tag) -{ - screen_info.orig_x = tag->u.videotext.x; - screen_info.orig_y = tag->u.videotext.y; - screen_info.orig_video_page = tag->u.videotext.video_page; - screen_info.orig_video_mode = tag->u.videotext.video_mode; - screen_info.orig_video_cols = tag->u.videotext.video_cols; - screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; - screen_info.orig_video_lines = tag->u.videotext.video_lines; - screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; - screen_info.orig_video_points = tag->u.videotext.video_points; - return 0; -} - -__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); #endif -static int __init parse_tag_ramdisk(const struct tag *tag) -{ - setup_ramdisk((tag->u.ramdisk.flags & 1) == 0, - (tag->u.ramdisk.flags & 2) == 0, - tag->u.ramdisk.start, tag->u.ramdisk.size); - return 0; -} - -__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); - -static int __init parse_tag_serialnr(const struct tag *tag) -{ - system_serial_low = tag->u.serialnr.low; - system_serial_high = tag->u.serialnr.high; - return 0; -} - -__tagtable(ATAG_SERIAL, parse_tag_serialnr); - -static int __init parse_tag_revision(const struct tag *tag) -{ - system_rev = tag->u.revision.rev; - return 0; -} - -__tagtable(ATAG_REVISION, parse_tag_revision); - -static int __init parse_tag_cmdline(const struct tag *tag) -{ -#if defined(CONFIG_CMDLINE_EXTEND) - strlcat(default_command_line, " ", COMMAND_LINE_SIZE); - strlcat(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); -#elif defined(CONFIG_CMDLINE_FORCE) - pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); -#else - strlcpy(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); -#endif - return 0; -} - -__tagtable(ATAG_CMDLINE, parse_tag_cmdline); - -/* - * Scan the tag table for this tag, and call its parse function. - * The tag table is built by the linker from all the __tagtable - * declarations. - */ -static int __init parse_tag(const struct tag *tag) -{ - extern struct tagtable __tagtable_begin, __tagtable_end; - struct tagtable *t; - - for (t = &__tagtable_begin; t < &__tagtable_end; t++) - if (tag->hdr.tag == t->tag) { - t->parse(tag); - break; - } - - return t < &__tagtable_end; -} - -/* - * Parse all tags in the list, checking both the global and architecture - * specific tag tables. - */ -static void __init parse_tags(const struct tag *t) -{ - for (; t->hdr.size; t = tag_next(t)) - if (!parse_tag(t)) - printk(KERN_WARNING - "Ignoring unrecognised tag 0x%08x\n", - t->hdr.tag); -} - -/* - * This holds our defaults. - */ -static struct init_tags { - struct tag_header hdr1; - struct tag_core core; - struct tag_header hdr2; - struct tag_mem32 mem; - struct tag_header hdr3; -} init_tags __initdata = { - { tag_size(tag_core), ATAG_CORE }, - { 1, PAGE_SIZE, 0xff }, - { tag_size(tag_mem32), ATAG_MEM }, - { MEM_SIZE }, - { 0, ATAG_NONE } -}; - static int __init customize_machine(void) { /* customizes platform devices, or adds new ones */ @@ -858,78 +696,6 @@ static void __init reserve_crashkernel(void) static inline void reserve_crashkernel(void) {} #endif /* CONFIG_KEXEC */ -static void __init squash_mem_tags(struct tag *tag) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM) - tag->hdr.tag = ATAG_NONE; -} - -static struct machine_desc * __init setup_machine_tags(unsigned int nr) -{ - struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc = NULL, *p; - char *from = default_command_line; - - init_tags.mem.start = PHYS_OFFSET; - - /* - * locate machine in the list of supported machines. - */ - for_each_machine_desc(p) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - mdesc = p; - break; - } - - if (!mdesc) { - early_print("\nError: unrecognized/unsupported machine ID" - " (r1 = 0x%08x).\n\n", nr); - dump_machine_table(); /* does not return */ - } - - if (__atags_pointer) - tags = phys_to_virt(__atags_pointer); - else if (mdesc->atag_offset) - tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); - -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) - /* - * If we have the old style parameters, convert them to - * a tag list. - */ - if (tags->hdr.tag != ATAG_CORE) - convert_to_tag_list(tags); -#endif - - if (tags->hdr.tag != ATAG_CORE) { -#if defined(CONFIG_OF) - /* - * If CONFIG_OF is set, then assume this is a reasonably - * modern system that should pass boot parameters - */ - early_print("Warning: Neither atags nor dtb found\n"); -#endif - tags = (struct tag *)&init_tags; - } - - if (mdesc->fixup) - mdesc->fixup(tags, &from, &meminfo); - - if (tags->hdr.tag == ATAG_CORE) { - if (meminfo.nr_banks != 0) - squash_mem_tags(tags); - save_atags(tags); - parse_tags(tags); - } - - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - - return mdesc; -} - static int __init meminfo_cmp(const void *_a, const void *_b) { const struct membank *a = _a, *b = _b; @@ -944,7 +710,7 @@ void __init setup_arch(char **cmdline_p) setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) - mdesc = setup_machine_tags(machine_arch_type); + mdesc = setup_machine_tags(__atags_pointer, machine_arch_type); machine_desc = mdesc; machine_name = mdesc->name; -- cgit v1.2.3 From bd51e2f595580fb64bd8494badef746c4d626b25 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 1 Sep 2012 03:03:25 +0100 Subject: ARM: 7506/1: allow for ATAGS to be configured out when DT support is selected Now that ATAGS support is well contained, we can easily remove it from the kernel build if so desired. It has to explicitly be disabled, and only when DT support is selected. Note: disabling kernel ATAGS support does not prevent the usage of CONFIG_ARM_ATAG_DTB_COMPAT. Signed-off-by: Nicolas Pitre Tested-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/Kconfig | 26 +++++++++++++++++++------- arch/arm/kernel/Makefile | 5 +++-- arch/arm/kernel/atags.h | 11 +++++++++++ 3 files changed, 33 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c5f9ae5dbd1a..5c7302e208ce 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1891,12 +1891,6 @@ config CC_STACKPROTECTOR neutralized via a kernel panic. This feature requires gcc version 4.2 or above. -config DEPRECATED_PARAM_STRUCT - bool "Provide old way to pass kernel parameters" - help - This was deprecated in 2001 and announced to live on for 5 years. - Some old boot loaders still use this way. - endmenu menu "Boot options" @@ -1909,6 +1903,23 @@ config USE_OF help Include support for flattened device tree machine descriptions. +config ATAGS + bool "Support for the traditional ATAGS boot data passing" if USE_OF + default y + help + This is the traditional way of passing data to the kernel at boot + time. If you are solely relying on the flattened device tree (or + the ARM_ATAG_DTB_COMPAT option) then you may unselect this option + to remove ATAGS support from your kernel binary. If unsure, + leave this to y. + +config DEPRECATED_PARAM_STRUCT + bool "Provide old way to pass kernel parameters" + depends on ATAGS + help + This was deprecated in 2001 and announced to live on for 5 years. + Some old boot loaders still use this way. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT @@ -2035,6 +2046,7 @@ config CMDLINE choice prompt "Kernel command line type" if CMDLINE != "" default CMDLINE_FROM_BOOTLOADER + depends on ATAGS config CMDLINE_FROM_BOOTLOADER bool "Use bootloader kernel arguments if available" @@ -2104,7 +2116,7 @@ config KEXEC config ATAGS_PROC bool "Export atags in procfs" - depends on KEXEC + depends on ATAGS && KEXEC default y help Should the atags used to boot the kernel be exported in an "atags" diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 086c9d3bc360..79e346a5d78b 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -15,10 +15,12 @@ CFLAGS_REMOVE_return_address.o = -pg # Object file lists. -obj-y := atags_parse.o elf.o entry-armv.o entry-common.o irq.o opcodes.o \ +obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o +obj-$(CONFIG_ATAGS) += atags_parse.o +obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o obj-$(CONFIG_LEDS) += leds.o @@ -52,7 +54,6 @@ test-kprobes-objs += kprobes-test-thumb.o else test-kprobes-objs += kprobes-test-arm.o endif -obj-$(CONFIG_ATAGS_PROC) += atags_proc.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index a888fdd381b5..9edc9692332d 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -5,4 +5,15 @@ static inline void save_atags(struct tag *tags) { } #endif void convert_to_tag_list(struct tag *tags); + +#ifdef CONFIG_ATAGS struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr); +#else +static inline struct machine_desc * +setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) +{ + early_print("no ATAGS support: can't continue\n"); + while (true); + unreachable(); +} +#endif -- cgit v1.2.3 From 749c59fd15b2c18dd6c15c353a899fb6ac49b865 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Thu, 30 Aug 2012 11:32:13 +0100 Subject: KVM: PIC: fix use of uninitialised variable. Commit aea218f3cbbc (KVM: PIC: call ack notifiers for irqs that are dropped form irr) used an uninitialised variable to track whether an appropriate apic had been found. This could result in calling the ack notifier incorrectly. Cc: Gleb Natapov Cc: Avi Kivity Signed-off-by: Jamie Iles Signed-off-by: Avi Kivity --- arch/x86/kvm/i8259.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index e498b18f010c..9fc9aa7ac703 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -318,7 +318,7 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) if (val & 0x10) { u8 edge_irr = s->irr & ~s->elcr; int i; - bool found; + bool found = false; struct kvm_vcpu *vcpu; s->init4 = val & 1; -- cgit v1.2.3 From 3ec18cd8b8f8395d0df604c62ab3bc2cf3a966b4 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Mon, 20 Aug 2012 11:24:21 +0200 Subject: perf/x86: Enable Intel Cedarview Atom suppport This patch enables perf_events support for Intel Cedarview Atom (model 54) processors. Support includes PEBS and LBR. Tested on my Atom N2600 netbook. Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120820092421.GA11284@quad Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel.c | 1 + arch/x86/kernel/cpu/perf_event_intel_lbr.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 7f2739e03e79..0d3d63afa76a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -2008,6 +2008,7 @@ __init int intel_pmu_init(void) break; case 28: /* Atom */ + case 54: /* Cedariew */ memcpy(hw_cache_event_ids, atom_hw_cache_event_ids, sizeof(hw_cache_event_ids)); diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c index 520b4265fcd2..da02e9cc3754 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c +++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c @@ -686,7 +686,8 @@ void intel_pmu_lbr_init_atom(void) * to have an operational LBR which can freeze * on PMU interrupt */ - if (boot_cpu_data.x86_mask < 10) { + if (boot_cpu_data.x86_model == 28 + && boot_cpu_data.x86_mask < 10) { pr_cont("LBR disabled due to erratum"); return; } -- cgit v1.2.3 From e534e871a94ba2e3bfdf0edd3685eb805fc960d8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 4 Sep 2012 17:22:45 -0700 Subject: ARM: OMAP4: Fix array size for irq_target_cpu If NR_IRQS is less than MAX_IRQS, we end up writing past the irq_target_cpu array in omap_wakeupgen_init(): /* Associate all the IRQs to boot CPU like GIC init does. */ for (i = 0; i < max_irqs; i++) irq_target_cpu[i] = boot_cpu; This can happen if SPARSE_IRQ is enabled as by default NR_IRQS is set to 16. Without this patch we're overwriting other data during the boot. Looks like a similar fix was posted by Benoit Cousson earlier as "ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu" but was lost. Cc: stable@vger.kernel.org Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap-wakeupgen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 05fdebfaa195..330d4c6e746b 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -46,7 +46,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); -static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; static unsigned int omap_secure_apis; -- cgit v1.2.3 From e829c66745e66558b624fd635be4a384fe854944 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 30 Aug 2012 19:22:36 +0200 Subject: ARM: gemini: fix the gemini build Test-compiling obscure machines I notice that the gemini (which by the way lacks a defconfig) is broken since some time back. Adding a simple missing include makes it build again. Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/mach-gemini/irq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7ac..020852d3bdd8 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #define IRQ_SOURCE(base_addr) (base_addr + 0x00) -- cgit v1.2.3 From 79c5fcebfe4021f326a6715009f0b6b622d5df92 Mon Sep 17 00:00:00 2001 From: Jesse Larrew Date: Thu, 7 Jun 2012 16:04:34 -0500 Subject: powerpc/vphn: Fix arch_update_cpu_topology() return value arch_update_cpu_topology() should only return 1 when the topology has actually changed, and should return 0 otherwise. This patch fixes a potential bug where rebuild_sched_domains() would reinitialize the sched domains even when the topology hasn't changed. Signed-off-by: Jesse Larrew Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 39b159751c35..59213cfaeca9 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu, /* * Update the node maps and sysfs entries for each cpu whose home node - * has changed. + * has changed. Returns 1 when the topology has changed, and 0 otherwise. */ int arch_update_cpu_topology(void) { - int cpu, nid, old_nid; + int cpu, nid, old_nid, changed = 0; unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0}; struct device *dev; @@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void) dev = get_cpu_device(cpu); if (dev) kobject_uevent(&dev->kobj, KOBJ_CHANGE); + changed = 1; } - return 1; + return changed; } static void topology_work_fn(struct work_struct *work) -- cgit v1.2.3 From dabe859ec6360a12e71f39bf695d174e19ff2688 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 26 Jul 2012 13:56:11 +0000 Subject: powerpc: Give hypervisor decrementer interrupts their own handler At the moment the handler for hypervisor decrementer interrupts is the same as for decrementer interrupts, i.e. timer_interrupt(). This is bogus; if we ever do get a hypervisor decrementer interrupt it won't have anything to do with the next timer event. In fact the only time we get hypervisor decrementer interrupts is when one is left pending on exit from a KVM guest. When we get a hypervisor decrementer interrupt we don't need to do anything special to clear it, since they are edge-triggered on the transition of HDEC from 0 to -1. Thus this adds an empty handler function for them. We don't need to have them masked when interrupts are soft-disabled, so we use STD_EXCEPTION_HV instead of MASKABLE_EXCEPTION_HV. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 3 ++- arch/powerpc/kernel/time.c | 9 +++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e894515e77bb..39aa97d3ff88 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -186,7 +186,7 @@ hardware_interrupt_hv: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800) MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer) - MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer) + STD_EXCEPTION_HV(0x980, 0x982, hdecrementer) STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a) KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00) @@ -486,6 +486,7 @@ machine_check_common: STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index be171ee73bf8..e49e93191b69 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -535,6 +535,15 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_exit(regs); } +/* + * Hypervisor decrementer interrupts shouldn't occur but are sometimes + * left pending on exit from a KVM guest. We don't need to do anything + * to clear them, as they are edge-triggered. + */ +void hdec_interrupt(struct pt_regs *regs) +{ +} + #ifdef CONFIG_SUSPEND static void generic_suspend_disable_irqs(void) { -- cgit v1.2.3 From 375f561a4131a0f501c8845a2a20f2ca1abc8f7a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 26 Jul 2012 18:51:09 +0000 Subject: powerpc/powernv: Always go into nap mode when CPU is offline The CPU hotplug code for the powernv platform currently only puts offline CPUs into nap mode if the powersave_nap variable is set. However, HV-style KVM on this platform requires secondary CPU threads to be offline and in nap mode. Since we know nap mode works just fine on all POWER7 machines, and the only machines that support the powernv platform are POWER7 machines, this changes the code to always put offline CPUs into nap mode, regardless of powersave_nap. Powersave_nap still controls whether or not CPUs go into nap mode when idle, as before. Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/processor.h | 1 + arch/powerpc/kernel/idle_power7.S | 2 ++ arch/powerpc/platforms/powernv/smp.c | 10 +--------- 3 files changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 53b6dfa83344..54b73a28c205 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable; enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ +extern void power7_nap(void); #ifdef CONFIG_PSERIES_IDLE extern void update_smt_snooze_delay(int snooze); diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 7140d838339e..e11863f4e595 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -28,7 +28,9 @@ _GLOBAL(power7_idle) lwz r4,ADDROFF(powersave_nap)(r3) cmpwi 0,r4,0 beqlr + /* fall through */ +_GLOBAL(power7_nap) /* NAP is a state loss, we create a regs frame on the * stack, fill it up with the state we care about and * stick a pointer to it in PACAR1. We really only diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 3ef46254c35b..7698b6e13c57 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void) { unsigned int cpu; - /* If powersave_nap is enabled, use NAP mode, else just - * spin aimlessly - */ - if (!powersave_nap) { - generic_mach_cpu_die(); - return; - } - /* Standard hot unplug procedure */ local_irq_disable(); idle_task_exit(); @@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void) */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { - power7_idle(); + power7_nap(); if (!generic_check_cpu_restart(cpu)) { DBG("CPU%d Unexpected exit while offline !\n", cpu); /* We may be getting an IPI, so we re-enable -- cgit v1.2.3 From 1b6ca2a6fe56e7697d57348646e07df08f43b1bb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:47:56 +0000 Subject: powerpc: Update DSCR on all CPUs when writing sysfs dscr_default Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 3529446c2abd..d4cbbd1fa75f 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -194,6 +194,12 @@ static ssize_t show_dscr_default(struct device *dev, return sprintf(buf, "%lx\n", dscr_default); } +static void update_dscr(void *dummy) +{ + if (!current->thread.dscr_inherit) + mtspr(SPRN_DSCR, dscr_default); +} + static ssize_t __used store_dscr_default(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -206,6 +212,8 @@ static ssize_t __used store_dscr_default(struct device *dev, return -EINVAL; dscr_default = val; + on_each_cpu(update_dscr, NULL, 1); + return count; } -- cgit v1.2.3 From 00ca0de02f80924dfff6b4f630e1dff3db005e35 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:48:46 +0000 Subject: powerpc: Keep thread.dscr and thread.dscr_inherit in sync When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/sysfs.c | 4 +++- arch/powerpc/kernel/traps.c | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index d4cbbd1fa75f..8302af649219 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -196,8 +196,10 @@ static ssize_t show_dscr_default(struct device *dev, static void update_dscr(void *dummy) { - if (!current->thread.dscr_inherit) + if (!current->thread.dscr_inherit) { + current->thread.dscr = dscr_default; mtspr(SPRN_DSCR, dscr_default); + } } static ssize_t __used store_dscr_default(struct device *dev, diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 158972341a2d..ae0843fa7a61 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -972,8 +972,9 @@ static int emulate_instruction(struct pt_regs *regs) cpu_has_feature(CPU_FTR_DSCR)) { PPC_WARN_EMULATED(mtdscr, regs); rd = (instword >> 21) & 0x1f; - mtspr(SPRN_DSCR, regs->gpr[rd]); + current->thread.dscr = regs->gpr[rd]; current->thread.dscr_inherit = 1; + mtspr(SPRN_DSCR, current->thread.dscr); return 0; } #endif -- cgit v1.2.3 From 1021cb268b3025573c4811f1dee4a11260c4507b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:49:47 +0000 Subject: powerpc: Fix DSCR inheritance in copy_thread() If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/process.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 710f400476de..1a1f2ddfb581 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, #endif /* CONFIG_PPC_STD_MMU_64 */ #ifdef CONFIG_PPC64 if (cpu_has_feature(CPU_FTR_DSCR)) { - if (current->thread.dscr_inherit) { - p->thread.dscr_inherit = 1; - p->thread.dscr = current->thread.dscr; - } else if (0 != dscr_default) { - p->thread.dscr_inherit = 1; - p->thread.dscr = dscr_default; - } else { - p->thread.dscr_inherit = 0; - p->thread.dscr = 0; - } + p->thread.dscr_inherit = current->thread.dscr_inherit; + p->thread.dscr = current->thread.dscr; } #endif -- cgit v1.2.3 From 714332858bfd40dcf8f741498336d93875c23aa7 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 3 Sep 2012 16:51:10 +0000 Subject: powerpc: Restore correct DSCR in context switch During a context switch we always restore the per thread DSCR value. If we aren't doing explicit DSCR management (ie thread.dscr_inherit == 0) and the default DSCR changed while the process has been sleeping we end up with the wrong value. Check thread.dscr_inherit and select the default DSCR or per thread DSCR as required. This was found with the following test case, when running with more threads than CPUs (ie forcing context switching): http://ozlabs.org/~anton/junkcode/dscr_default_test.c With the four patches applied I can run a combination of all test cases successfully at the same time: http://ozlabs.org/~anton/junkcode/dscr_default_test.c http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard Cc: # 3.0+ Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/asm-offsets.c | 1 + arch/powerpc/kernel/entry_64.S | 23 +++++++++++++++++------ 2 files changed, 18 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 85b05c463fae..e8995727b1c1 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -76,6 +76,7 @@ int main(void) DEFINE(SIGSEGV, SIGSEGV); DEFINE(NMI_MASK, NMI_MASK); DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr)); + DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit)); #else DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 4b01a25e29ef..b40e0b4815b3 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork) li r3,0 b syscall_exit + .section ".toc","aw" +DSCR_DEFAULT: + .tc dscr_default[TC],dscr_default + + .section ".text" + /* * This routine switches between two different tasks. The process * state of one is saved on its kernel stack. Then the state @@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) - ld r6,_CCR(r1) - mtcrf 0xFF,r6 - #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION ld r0,THREAD_VRSAVE(r4) @@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_PPC64 BEGIN_FTR_SECTION + lwz r6,THREAD_DSCR_INHERIT(r4) + ld r7,DSCR_DEFAULT@toc(2) ld r0,THREAD_DSCR(r4) - cmpd r0,r25 - beq 1f + cmpwi r6,0 + bne 1f + ld r0,0(r7) +1: cmpd r0,r25 + beq 2f mtspr SPRN_DSCR,r0 -1: +2: END_FTR_SECTION_IFSET(CPU_FTR_DSCR) #endif + ld r6,_CCR(r1) + mtcrf 0xFF,r6 + /* r3-r13 are destroyed -- Cort */ REST_8GPRS(14, r1) REST_10GPRS(22, r1) -- cgit v1.2.3 From 9fb1b36ca1234e64a5d1cc573175303395e3354d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 4 Sep 2012 18:33:08 +0000 Subject: powerpc: Make sure IPI handlers see data written by IPI senders We have been observing hangs, both of KVM guest vcpu tasks and more generally, where a process that is woken doesn't properly wake up and continue to run, but instead sticks in TASK_WAKING state. This happens because the update of rq->wake_list in ttwu_queue_remote() is not ordered with the update of ipi_message in smp_muxed_ipi_message_pass(), and the reading of rq->wake_list in scheduler_ipi() is not ordered with the reading of ipi_message in smp_ipi_demux(). Thus it is possible for the IPI receiver not to see the updated rq->wake_list and therefore conclude that there is nothing for it to do. In order to make sure that anything done before smp_send_reschedule() is ordered before anything done in the resulting call to scheduler_ipi(), this adds barriers in smp_muxed_message_pass() and smp_ipi_demux(). The barrier in smp_muxed_message_pass() is a full barrier to ensure that there is a full ordering between the smp_send_reschedule() caller and scheduler_ipi(). In smp_ipi_demux(), we use xchg() rather than xchg_local() because xchg() includes release and acquire barriers. Using xchg() rather than xchg_local() makes sense given that ipi_message is not just accessed locally. This moves the barrier between setting the message and calling the cause_ipi() function into the individual cause_ipi implementations. Most of them -- those that used outb, out_8 or similar -- already had a full barrier because out_8 etc. include a sync before the MMIO store. This adds an explicit barrier in the two remaining cases. These changes made no measurable difference to the speed of IPIs as measured using a simple ping-pong latency test across two CPUs on different cores of a POWER7 machine. The analysis of the reason why processes were not waking up properly is due to Milton Miller. Cc: stable@vger.kernel.org # v3.0+ Reported-by: Milton Miller Signed-off-by: Paul Mackerras Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/dbell.c | 2 ++ arch/powerpc/kernel/smp.c | 11 +++++++++-- arch/powerpc/sysdev/xics/icp-hv.c | 6 +++++- 3 files changed, 16 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 5b25c8060fd6..a892680668d8 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void) void doorbell_cause_ipi(int cpu, unsigned long data) { + /* Order previous accesses vs. msgsnd, which is treated as a store */ + mb(); ppc_msgsnd(PPC_DBELL, 0, data); } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 0321007086f7..8d4214afc21d 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg) struct cpu_messages *info = &per_cpu(ipi_message, cpu); char *message = (char *)&info->messages; + /* + * Order previous accesses before accesses in the IPI handler. + */ + smp_mb(); message[msg] = 1; - mb(); + /* + * cause_ipi functions are required to include a full barrier + * before doing whatever causes the IPI. + */ smp_ops->cause_ipi(cpu, info->data); } @@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void) mb(); /* order any irq clear */ do { - all = xchg_local(&info->messages, 0); + all = xchg(&info->messages, 0); #ifdef __BIG_ENDIAN if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION))) diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index 14469cf9df68..df0fc5821469 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value) static inline void icp_hv_set_qirr(int n_cpu , u8 value) { int hw_cpu = get_hard_smp_processor_id(n_cpu); - long rc = plpar_hcall_norets(H_IPI, hw_cpu, value); + long rc; + + /* Make sure all previous accesses are ordered before IPI sending */ + mb(); + rc = plpar_hcall_norets(H_IPI, hw_cpu, value); if (rc != H_SUCCESS) { pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x " "returned %ld\n", __func__, n_cpu, hw_cpu, value, rc); -- cgit v1.2.3 From 636802ef96eebe279b22ad9f9dacfe29291e45c7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 4 Sep 2012 15:08:28 +0000 Subject: powerpc: Don't use __put_user() in patch_instruction patch_instruction() can be called very early on ppc32, when the kernel isn't yet running at it's linked address. That can cause the ! is_kernel_addr() test in __put_user() to trip and call might_sleep() which is very bad at that point during boot. Use a lower level function instead for now, at least until we get to rework ppc32 boot process to do the code patching later, like ppc64 does. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/code-patching.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index dd223b3eb333..17e5b2364312 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr) { int err; - err = __put_user(instr, addr); + __put_user_size(instr, addr, 4, err); if (err) return err; asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr)); -- cgit v1.2.3 From 4454d32749465ffa77d82bc1fdd196d6dedc544b Mon Sep 17 00:00:00 2001 From: Joe Millenbach Date: Sun, 2 Sep 2012 17:38:20 -0700 Subject: x86/kconfig: Remove outdated reference to Intel CPUs in CONFIG_SWIOTLB Deleted the no longer valid example of which x86 CPUs lack a hardware IOMMU, and moved the "If unsure..." statement to a new line to follow the style of surrounding options. Signed-off-by: Joe Millenbach Reviewed-by: Josh Triplett Cc: team-fjord@googlegroups.com Cc: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1346632700-29113-1-git-send-email-jmillenbach@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 8ec3a1aa4abd..50a1d1f9b6d3 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -746,10 +746,10 @@ config SWIOTLB def_bool y if X86_64 ---help--- Support for software bounce buffers used on x86-64 systems - which don't have a hardware IOMMU (e.g. the current generation - of Intel's x86-64 CPUs). Using this PCI devices which can only - access 32-bits of memory can be used on systems with more than - 3 GB of memory. If unsure, say Y. + which don't have a hardware IOMMU. Using this PCI devices + which can only access 32-bits of memory can be used on systems + with more than 3 GB of memory. + If unsure, say Y. config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU) -- cgit v1.2.3 From 50e900417b8096939d12a46848f965e27a905e36 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Tue, 4 Sep 2012 15:45:17 -0400 Subject: xen/p2m: Fix one-off error in checking the P2M tree directory. We would traverse the full P2M top directory (from 0->MAX_DOMAIN_PAGES inclusive) when trying to figure out whether we can re-use some of the P2M middle leafs. Which meant that if the kernel was compiled with MAX_DOMAIN_PAGES=512 we would try to use the 512th entry. Fortunately for us the p2m_top_index has a check for this: BUG_ON(pfn >= MAX_P2M_PFN); which we hit and saw this: (XEN) domain_crash_sync called from entry.S (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.1.2-OVM x86_64 debug=n Tainted: C ]---- (XEN) CPU: 0 (XEN) RIP: e033:[] (XEN) RFLAGS: 0000000000000212 EM: 1 CONTEXT: pv guest (XEN) rax: ffffffff81db5000 rbx: ffffffff81db4000 rcx: 0000000000000000 (XEN) rdx: 0000000000480211 rsi: 0000000000000000 rdi: ffffffff81db4000 (XEN) rbp: ffffffff81793db8 rsp: ffffffff81793d38 r8: 0000000008000000 (XEN) r9: 4000000000000000 r10: 0000000000000000 r11: ffffffff81db7000 (XEN) r12: 0000000000000ff8 r13: ffffffff81df1ff8 r14: ffffffff81db6000 (XEN) r15: 0000000000000ff8 cr0: 000000008005003b cr4: 00000000000026f0 (XEN) cr3: 0000000661795000 cr2: 0000000000000000 Fixes-Oracle-Bug: 14570662 CC: stable@vger.kernel.org # only for v3.5 Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/p2m.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index d4b255463253..76ba0e97e530 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -599,7 +599,7 @@ bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_ if (p2m_index(set_pfn)) return false; - for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { topidx = p2m_top_index(pfn); if (!p2m_top[topidx]) -- cgit v1.2.3 From ce7184bdbd38d920fb515266fbbdc585ad2e5493 Mon Sep 17 00:00:00 2001 From: Alex Shi Date: Fri, 24 Aug 2012 08:55:13 +0000 Subject: xen: fix logical error in tlb flushing While TLB_FLUSH_ALL gets passed as 'end' argument to flush_tlb_others(), the Xen code was made to check its 'start' parameter. That may give a incorrect op.cmd to MMUEXT_INVLPG_MULTI instead of MMUEXT_TLB_FLUSH_MULTI. Then it causes some page can not be flushed from TLB. This patch fixed this issue. Reported-by: Jan Beulich Signed-off-by: Alex Shi Acked-by: Jan Beulich Tested-by: Yongjie Ren Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index b65a76133f4f..5141d808e751 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1283,7 +1283,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask)); args->op.cmd = MMUEXT_TLB_FLUSH_MULTI; - if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { + if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) { args->op.cmd = MMUEXT_INVLPG_MULTI; args->op.arg1.linear_addr = start; } -- cgit v1.2.3 From bc6c83641e1df61cff67748987f95ca62953565e Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 5 Sep 2012 18:38:50 +0200 Subject: uml: fix compile error in deliver_alarm() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile error on UML. arch/um/os-Linux/time.c: In function 'deliver_alarm': arch/um/os-Linux/time.c:117:3: error: too few arguments to function 'alarm_handler' arch/um/os-Linux/internal.h:1:6: note: declared here The error was introduced by commit d3c1cfcd ("um: pass siginfo to guest process") in 3.6-rc1. Signed-off-by: Miklos Szeredi CC: Martin Pärtel Signed-off-by: Linus Torvalds --- arch/um/os-Linux/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index f60238559af3..0748fe0c8a73 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -114,7 +114,7 @@ static void deliver_alarm(void) skew += this_tick - last_tick; while (skew >= one_tick) { - alarm_handler(SIGVTALRM, NULL); + alarm_handler(SIGVTALRM, NULL, NULL); skew -= one_tick; } -- cgit v1.2.3 From 9016083b7bc4829c4f97f37a1a3102e0f5a37692 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Wed, 5 Sep 2012 14:07:59 +0200 Subject: s390/hugetlb: use direct TLB flushing for hugetlbfs pages huge_ptep_get_and_clear() is either missing a TLB invalidation or an mm->context.attach_count check. Since the attach_count logic was introduced with normal ptes in mind, let's just use direct TLB flushing for hugetlbfs pages. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/hugetlb.h | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h index 799ed0f1643d..2d6e6e380564 100644 --- a/arch/s390/include/asm/hugetlb.h +++ b/arch/s390/include/asm/hugetlb.h @@ -66,16 +66,6 @@ static inline pte_t huge_ptep_get(pte_t *ptep) return pte; } -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - pte_t pte = huge_ptep_get(ptep); - - mm->context.flush_mm = 1; - pmd_clear((pmd_t *) ptep); - return pte; -} - static inline void __pmd_csp(pmd_t *pmdp) { register unsigned long reg2 asm("2") = pmd_val(*pmdp); @@ -117,6 +107,15 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, __pmd_csp(pmdp); } +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + pte_t pte = huge_ptep_get(ptep); + + huge_ptep_invalidate(mm, addr, ptep); + return pte; +} + #define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ ({ \ int __changed = !pte_same(huge_ptep_get(__ptep), __entry); \ @@ -131,10 +130,7 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, ({ \ pte_t __pte = huge_ptep_get(__ptep); \ if (pte_write(__pte)) { \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - huge_ptep_invalidate(__mm, __addr, __ptep); \ + huge_ptep_invalidate(__mm, __addr, __ptep); \ set_huge_pte_at(__mm, __addr, __ptep, \ huge_pte_wrprotect(__pte)); \ } \ -- cgit v1.2.3 From 50888469bda11bcff306893bbaff21f25894be0b Mon Sep 17 00:00:00 2001 From: Steven Miao Date: Tue, 31 Jul 2012 17:28:10 +0800 Subject: blackfin: smp: adapt to generic smp helpers Replace blackfin ipi message queue with generic smp helper function. Signed-off-by: Steven Miao Signed-off-by: Bob Liu --- arch/blackfin/Kconfig | 1 + arch/blackfin/include/asm/smp.h | 2 + arch/blackfin/mach-common/smp.c | 223 ++++++++++++---------------------------- 3 files changed, 69 insertions(+), 157 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f34861920634..c7092e6057c5 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -38,6 +38,7 @@ config BLACKFIN select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE select IRQ_PER_CPU if SMP + select USE_GENERIC_SMP_HELPERS if SMP select HAVE_NMI_WATCHDOG if NMI_WATCHDOG select GENERIC_SMP_IDLE_THREAD select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index dc3d144b4bb5..9631598dcc5d 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -18,6 +18,8 @@ #define raw_smp_processor_id() blackfin_core_id() extern void bfin_relocate_coreb_l1_mem(void); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1) asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr); diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 00bbe672b3b3..a40151306b77 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -48,10 +48,13 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS]; struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; -#define BFIN_IPI_TIMER 0 -#define BFIN_IPI_RESCHEDULE 1 -#define BFIN_IPI_CALL_FUNC 2 -#define BFIN_IPI_CPU_STOP 3 +enum ipi_message_type { + BFIN_IPI_TIMER, + BFIN_IPI_RESCHEDULE, + BFIN_IPI_CALL_FUNC, + BFIN_IPI_CALL_FUNC_SINGLE, + BFIN_IPI_CPU_STOP, +}; struct blackfin_flush_data { unsigned long start; @@ -60,35 +63,20 @@ struct blackfin_flush_data { void *secondary_stack; - -struct smp_call_struct { - void (*func)(void *info); - void *info; - int wait; - cpumask_t *waitmask; -}; - static struct blackfin_flush_data smp_flush_data; static DEFINE_SPINLOCK(stop_lock); -struct ipi_message { - unsigned long type; - struct smp_call_struct call_struct; -}; - /* A magic number - stress test shows this is safe for common cases */ #define BFIN_IPI_MSGQ_LEN 5 /* Simple FIFO buffer, overflow leads to panic */ -struct ipi_message_queue { - spinlock_t lock; +struct ipi_data { unsigned long count; - unsigned long head; /* head of the queue */ - struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN]; + unsigned long bits; }; -static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue); +static DEFINE_PER_CPU(struct ipi_data, bfin_ipi); static void ipi_cpu_stop(unsigned int cpu) { @@ -129,28 +117,6 @@ static void ipi_flush_icache(void *info) blackfin_icache_flush_range(fdata->start, fdata->end); } -static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) -{ - int wait; - void (*func)(void *info); - void *info; - func = msg->call_struct.func; - info = msg->call_struct.info; - wait = msg->call_struct.wait; - func(info); - if (wait) { -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * 'wait' usually means synchronization between CPUs. - * Invalidate D cache in case shared data was changed - * by func() to ensure cache coherence. - */ - resync_core_dcache(); -#endif - cpumask_clear_cpu(cpu, msg->call_struct.waitmask); - } -} - /* Use IRQ_SUPPLE_0 to request reschedule. * When returning from interrupt to user space, * there is chance to reschedule */ @@ -172,152 +138,95 @@ void ipi_timer(void) static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) { - struct ipi_message *msg; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; unsigned int cpu = smp_processor_id(); - unsigned long flags; + unsigned long pending; + unsigned long msg; platform_clear_ipi(cpu, IRQ_SUPPLE_1); - msg_queue = &__get_cpu_var(ipi_msg_queue); - - spin_lock_irqsave(&msg_queue->lock, flags); - - while (msg_queue->count) { - msg = &msg_queue->ipi_message[msg_queue->head]; - switch (msg->type) { - case BFIN_IPI_TIMER: - ipi_timer(); - break; - case BFIN_IPI_RESCHEDULE: - scheduler_ipi(); - break; - case BFIN_IPI_CALL_FUNC: - ipi_call_function(cpu, msg); - break; - case BFIN_IPI_CPU_STOP: - ipi_cpu_stop(cpu); - break; - default: - printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n", - cpu, msg->type); - break; - } - msg_queue->head++; - msg_queue->head %= BFIN_IPI_MSGQ_LEN; - msg_queue->count--; + bfin_ipi_data = &__get_cpu_var(bfin_ipi); + + while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) { + msg = 0; + do { + msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1); + switch (msg) { + case BFIN_IPI_TIMER: + ipi_timer(); + break; + case BFIN_IPI_RESCHEDULE: + scheduler_ipi(); + break; + case BFIN_IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + + case BFIN_IPI_CALL_FUNC_SINGLE: + generic_smp_call_function_single_interrupt(); + break; + + case BFIN_IPI_CPU_STOP: + ipi_cpu_stop(cpu); + break; + } + } while (msg < BITS_PER_LONG); + + smp_mb(); } - spin_unlock_irqrestore(&msg_queue->lock, flags); return IRQ_HANDLED; } -static void ipi_queue_init(void) +static void bfin_ipi_init(void) { unsigned int cpu; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; for_each_possible_cpu(cpu) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_init(&msg_queue->lock); - msg_queue->count = 0; - msg_queue->head = 0; + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + bfin_ipi_data->bits = 0; + bfin_ipi_data->count = 0; } } -static inline void smp_send_message(cpumask_t callmap, unsigned long type, - void (*func) (void *info), void *info, int wait) +void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) { unsigned int cpu; - struct ipi_message_queue *msg_queue; - struct ipi_message *msg; - unsigned long flags, next_msg; - cpumask_t waitmask; /* waitmask is shared by all cpus */ - - cpumask_copy(&waitmask, &callmap); - for_each_cpu(cpu, &callmap) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_irqsave(&msg_queue->lock, flags); - if (msg_queue->count < BFIN_IPI_MSGQ_LEN) { - next_msg = (msg_queue->head + msg_queue->count) - % BFIN_IPI_MSGQ_LEN; - msg = &msg_queue->ipi_message[next_msg]; - msg->type = type; - if (type == BFIN_IPI_CALL_FUNC) { - msg->call_struct.func = func; - msg->call_struct.info = info; - msg->call_struct.wait = wait; - msg->call_struct.waitmask = &waitmask; - } - msg_queue->count++; - } else - panic("IPI message queue overflow\n"); - spin_unlock_irqrestore(&msg_queue->lock, flags); + struct ipi_data *bfin_ipi_data; + unsigned long flags; + + local_irq_save(flags); + + for_each_cpu(cpu, cpumask) { + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + smp_mb(); + set_bit(msg, &bfin_ipi_data->bits); + bfin_ipi_data->count++; platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } - if (wait) { - while (!cpumask_empty(&waitmask)) - blackfin_dcache_invalidate_range( - (unsigned long)(&waitmask), - (unsigned long)(&waitmask)); -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * Invalidate D cache in case shared data was changed by - * other processors to ensure cache coherence. - */ - resync_core_dcache(); -#endif - } + local_irq_restore(flags); } -int smp_call_function(void (*func)(void *info), void *info, int wait) +void arch_send_call_function_single_ipi(int cpu) { - cpumask_t callmap; - - preempt_disable(); - cpumask_copy(&callmap, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &callmap); - if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - preempt_enable(); - - return 0; + send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE); } -EXPORT_SYMBOL_GPL(smp_call_function); -int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, - int wait) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { - unsigned int cpu = cpuid; - cpumask_t callmap; - - if (cpu_is_offline(cpu)) - return 0; - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - return 0; + send_ipi(mask, BFIN_IPI_CALL_FUNC); } -EXPORT_SYMBOL_GPL(smp_call_function_single); void smp_send_reschedule(int cpu) { - cpumask_t callmap; - /* simply trigger an ipi */ - - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0); + send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE); return; } void smp_send_msg(const struct cpumask *mask, unsigned long type) { - smp_send_message(*mask, type, NULL, NULL, 0); + send_ipi(mask, type); } void smp_timer_broadcast(const struct cpumask *mask) @@ -333,7 +242,7 @@ void smp_send_stop(void) cpumask_copy(&callmap, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &callmap); if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0); + send_ipi(&callmap, BFIN_IPI_CPU_STOP); preempt_enable(); @@ -436,7 +345,7 @@ void __init smp_prepare_boot_cpu(void) void __init smp_prepare_cpus(unsigned int max_cpus) { platform_prepare_cpus(max_cpus); - ipi_queue_init(); + bfin_ipi_init(); platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0); platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1); } -- cgit v1.2.3 From b4ad51559c2f12c34a0340b26ffb02e4b285bc51 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 4 Sep 2012 20:04:35 +0100 Subject: ARM: 7512/1: Fix XIP build due to PHYS_OFFSET definition moving During the p2v changes, the PHYS_OFFSET #define moved into a !__ASSEMBLY__ section. This causes a XIP build to fail with arch/arm/kernel/head.o: In function 'stext': arch/arm/kernel/head.S:146: undefined reference to 'PHYS_OFFSET' Momentarily leave the #ifndef __ASSEMBLY__ section so we can define PHYS_OFFSET for all compilation units. Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/include/asm/memory.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index e965f1b560f1..5f6ddcc56452 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. -- cgit v1.2.3 From 70b0476a2394de4f4e32e0b67288d80ff71ca963 Mon Sep 17 00:00:00 2001 From: David Brown Date: Tue, 4 Sep 2012 21:36:37 +0100 Subject: ARM: 7513/1: Make sure dtc is built before running it 'make dtbs' in a clean tree will try running the dtc before actually building it. Make these rules depend upon the scripts to build it. Cc: Signed-off-by: David Brown Signed-off-by: Russell King --- arch/arm/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6d..a051dfbdd7db 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now -- cgit v1.2.3 From 62194bdab89b30f451d210247d09e1c146e6d0ad Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 6 Sep 2012 21:24:32 +0100 Subject: ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82bf3a50..e968a52e4881 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -356,15 +356,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. -- cgit v1.2.3 From 2b2040af0b64cd93e5d4df2494c4486cf604090d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:21:44 +0100 Subject: ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling path get_user may fail to load from the provided __user address due to an unhandled fault generated by the access. In the case of the undefined instruction trap, this results in failure to load the faulting instruction, in which case we should send SIGILL to the task rather than continue with potentially uninitialised data. Signed-off-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f7945218b8c6..b0179b89a04c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", -- cgit v1.2.3 From 4f97704555672f9ab48ca623561e96a9430bec9a Mon Sep 17 00:00:00 2001 From: "Ren, Yongjie" Date: Fri, 7 Sep 2012 07:36:59 +0000 Subject: KVM: x86: Check INVPCID feature bit in EBX of leaf 7 Checks and operations on the INVPCID feature bit should use EBX of CPUID leaf 7 instead of ECX. Signed-off-by: Junjie Mao Signed-off-by: Yongjie Ren Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index c00f03de1b79..002b4a566e2d 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6575,7 +6575,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) /* Exposing INVPCID only when PCID is exposed */ best = kvm_find_cpuid_entry(vcpu, 0x7, 0); if (vmx_invpcid_supported() && - best && (best->ecx & bit(X86_FEATURE_INVPCID)) && + best && (best->ebx & bit(X86_FEATURE_INVPCID)) && guest_cpuid_has_pcid(vcpu)) { exec_control |= SECONDARY_EXEC_ENABLE_INVPCID; vmcs_write32(SECONDARY_VM_EXEC_CONTROL, @@ -6585,7 +6585,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control); if (best) - best->ecx &= ~bit(X86_FEATURE_INVPCID); + best->ebx &= ~bit(X86_FEATURE_INVPCID); } } -- cgit v1.2.3 From 8404663f81d212918ff85f493649a7991209fa04 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 7 Sep 2012 18:22:28 +0100 Subject: ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS The {get,put}_user macros don't perform range checking on the provided __user address when !CPU_HAS_DOMAINS. This patch reworks the out-of-line assembly accessors to check the user address against a specified limit, returning -EFAULT if is is out of range. [will: changed get_user register allocation to match put_user] [rmk: fixed building on older ARM architectures] Reported-by: Catalin Marinas Signed-off-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 8 ++++++++ arch/arm/include/asm/uaccess.h | 40 +++++++++++++++++++++++++++------------- arch/arm/lib/getuser.S | 23 +++++++++++++++-------- arch/arm/lib/putuser.S | 6 ++++++ 4 files changed, 56 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb93621d0d..5c8b3bf4d825 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 479a6352e0b5..6f83ad6e4d3d 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) #define get_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -135,31 +146,34 @@ extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") #define put_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7c3e32..9b06bb41fca6 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include +#include #include #include ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db25990c589..3d73dcb959b0 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include +#include #include #include ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] -- cgit v1.2.3 From ad72907acd2943304c292ae36960bb66e6dc23c9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:24:10 +0100 Subject: ARM: 7528/1: uaccess: annotate [__]{get,put}_user functions with might_fault() The user access functions may generate a fault, resulting in invocation of a handler that may sleep. This patch annotates the accessors with might_fault() so that we print a warning if they are invoked from atomic context and help lockdep keep track of mmap_sem. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/uaccess.h | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 6f83ad6e4d3d..77bd79f2ffdb 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -118,7 +118,7 @@ extern int __get_user_4(void *); : "0" (__p), "r" (__l) \ : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ @@ -141,6 +141,12 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); @@ -155,7 +161,7 @@ extern int __put_user_8(void *, unsigned long long); : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ @@ -180,6 +186,12 @@ extern int __put_user_8(void *, unsigned long long); __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -233,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -314,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ -- cgit v1.2.3 From beafa0de3d3e0d0ece7638cded879815f359f1cb Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:24:53 +0100 Subject: ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop The delay functions may be called by some platforms between switching to the timer-based delay loop but before calibration. In this case, the initial loops_per_jiffy may not be suitable for the timer (although a compromise may be achievable) and delay times may be considered too inaccurate. This patch updates loops_per_jiffy when switching to the timer-based delay loop so that delays are consistent prior to calibration. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/lib/delay.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc69254e..395d5fbb8fa2 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq) { pr_info("Switching to timer-based delay loop\n"); lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; -- cgit v1.2.3 From db2e1f43e7b2320d0450fe34e5ac4ac4d8c7708d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 6 Sep 2012 09:44:59 +0200 Subject: s390/hwcaps: do not report high gprs for 31 bit kernel The bit for high gprs in the AT_HWCAP auxiliary vector field and the highgprs tag in the output of /proc/cpuinfo should not be set for 31 bit kernels. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f86c81e13c37..40b57693de38 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -974,11 +974,13 @@ static void __init setup_hwcaps(void) if (MACHINE_HAS_HPAGE) elf_hwcap |= HWCAP_S390_HPAGE; +#if defined(CONFIG_64BIT) /* * 64-bit register support for 31-bit processes * HWCAP_S390_HIGH_GPRS is bit 9. */ elf_hwcap |= HWCAP_S390_HIGH_GPRS; +#endif get_cpu_id(&cpu_id); switch (cpu_id.machine) { -- cgit v1.2.3 From 4484141a94f4a5afea6ebc0b2abba0aa1b0ae9d1 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Fri, 7 Sep 2012 14:14:20 +0800 Subject: KVM: fix error paths for failed gfn_to_page() calls This bug was triggered: [ 4220.198458] BUG: unable to handle kernel paging request at fffffffffffffffe [ 4220.203907] IP: [] put_page+0xf/0x34 ...... [ 4220.237326] Call Trace: [ 4220.237361] [] kvm_arch_destroy_vm+0xf9/0x101 [kvm] [ 4220.237382] [] kvm_put_kvm+0xcc/0x127 [kvm] [ 4220.237401] [] kvm_vcpu_release+0x18/0x1c [kvm] [ 4220.237407] [] __fput+0x111/0x1ed [ 4220.237411] [] ____fput+0xe/0x10 [ 4220.237418] [] task_work_run+0x5d/0x88 [ 4220.237424] [] do_exit+0x2bf/0x7ca The test case: printf(fmt, ##args); \ exit(-1);} while (0) static int create_vm(void) { int sys_fd, vm_fd; sys_fd = open("/dev/kvm", O_RDWR); if (sys_fd < 0) die("open /dev/kvm fail.\n"); vm_fd = ioctl(sys_fd, KVM_CREATE_VM, 0); if (vm_fd < 0) die("KVM_CREATE_VM fail.\n"); return vm_fd; } static int create_vcpu(int vm_fd) { int vcpu_fd; vcpu_fd = ioctl(vm_fd, KVM_CREATE_VCPU, 0); if (vcpu_fd < 0) die("KVM_CREATE_VCPU ioctl.\n"); printf("Create vcpu.\n"); return vcpu_fd; } static void *vcpu_thread(void *arg) { int vm_fd = (int)(long)arg; create_vcpu(vm_fd); return NULL; } int main(int argc, char *argv[]) { pthread_t thread; int vm_fd; (void)argc; (void)argv; vm_fd = create_vm(); pthread_create(&thread, NULL, vcpu_thread, (void *)(long)vm_fd); printf("Exit.\n"); return 0; } It caused by release kvm->arch.ept_identity_map_addr which is the error page. The parent thread can send KILL signal to the vcpu thread when it was exiting which stops faulting pages and potentially allocating memory. So gfn_to_pfn/gfn_to_page may fail at this time Fixed by checking the page before it is used Signed-off-by: Xiao Guangrong Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 19 ++++++++++++++++--- arch/x86/kvm/x86.c | 13 ++++++++++--- 2 files changed, 26 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 002b4a566e2d..b1eb202ee76a 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3619,6 +3619,7 @@ static void seg_setup(int seg) static int alloc_apic_access_page(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3633,7 +3634,13 @@ static int alloc_apic_access_page(struct kvm *kvm) if (r) goto out; - kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00); + page = gfn_to_page(kvm, 0xfee00); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.apic_access_page = page; out: mutex_unlock(&kvm->slots_lock); return r; @@ -3641,6 +3648,7 @@ out: static int alloc_identity_pagetable(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3656,8 +3664,13 @@ static int alloc_identity_pagetable(struct kvm *kvm) if (r) goto out; - kvm->arch.ept_identity_pagetable = gfn_to_page(kvm, - kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.ept_identity_pagetable = page; out: mutex_unlock(&kvm->slots_lock); return r; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 148ed666e311..2966c847d489 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5113,17 +5113,20 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu) !kvm_event_needs_reinjection(vcpu); } -static void vapic_enter(struct kvm_vcpu *vcpu) +static int vapic_enter(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; struct page *page; if (!apic || !apic->vapic_addr) - return; + return 0; page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT); + if (is_error_page(page)) + return -EFAULT; vcpu->arch.apic->vapic_page = page; + return 0; } static void vapic_exit(struct kvm_vcpu *vcpu) @@ -5430,7 +5433,11 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) } vcpu->srcu_idx = srcu_read_lock(&kvm->srcu); - vapic_enter(vcpu); + r = vapic_enter(vcpu); + if (r) { + srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx); + return r; + } r = 1; while (r > 0) { -- cgit v1.2.3 From f3d87524975f01b885fc3d009c6ab6afd0d00746 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 10 Sep 2012 16:14:16 +0200 Subject: arm: mm: fix DMA pool affiliation check The __free_from_pool() function was changed in e9da6e9905e639b0f842a244bc770b48ad0523e9. Unfortunately, the test that checks whether the provided (start,size) is within the DMA pool has been improperly modified. It used to be: if (start < coherent_head.vm_start || end > coherent_head.vm_end) Where coherent_head.vm_end was non-inclusive (i.e, it did not include the first byte after the pool). The test has been changed to: if (start < pool->vaddr || start > pool->vaddr + pool->size) So now pool->vaddr + pool->size is inclusive (i.e, it includes the first byte after the pool), so the test should be >= instead of >. This bug causes the following message when freeing the *first* DMA coherent buffer that has been allocated, because its virtual address is exactly equal to pool->vaddr + pool->size : WARNING: at /home/thomas/projets/linux-2.6/arch/arm/mm/dma-mapping.c:463 __free_from_pool+0xa4/0xc0() freeing wrong coherent size from pool Signed-off-by: Thomas Petazzoni Cc: Marek Szyprowski Cc: Russell King Cc: Lior Amsalem Cc: Maen Suleiman Cc: Tawfik Bayouk Cc: Shadi Ammouri Cc: Eran Ben-Avi Cc: Yehuda Yitschak Cc: Nadav Haklai [m.szyprowski: rebased onto v3.6-rc5 and resolved conflict] Signed-off-by: Marek Szyprowski --- arch/arm/mm/dma-mapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 051204fc4617..e59c4ab71bcb 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -489,7 +489,7 @@ static bool __in_atomic_pool(void *start, size_t size) void *pool_start = pool->vaddr; void *pool_end = pool->vaddr + pool->size; - if (start < pool_start || start > pool_end) + if (start < pool_start || start >= pool_end) return false; if (end <= pool_end) -- cgit v1.2.3 From 6895f97e15895625e03c95df904d92befdac7118 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 6 Sep 2012 22:11:25 +0100 Subject: kbuild: add symbol prefix arg to kallsyms Commit 1f2bfbd00e466ff3489b2ca5cc75b1cccd14c123 ("kbuild: link of vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on architectures which have symbol prefixes. The --symbol-prefix argument used to be added to the KALLSYMS command line from the architecture Makefile, however this isn't picked up by the new scripts/link-vmlinux.sh. This resulted in symbols like kallsyms_addresses being added which weren't correctly overriding the weak symbols such as _kallsyms_addresses. These could then trigger BUG_ONs in kallsyms code. This is fixed by removing the KALLSYMS addition from the architecture Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script to determine whether to add the --symbol-prefix argument. Signed-off-by: James Hogan Signed-off-by: Bob Liu --- arch/blackfin/Makefile | 1 - scripts/link-vmlinux.sh | 7 ++++++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index d3d7e64ca96d..66cf00095b84 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -20,7 +20,6 @@ endif KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) KBUILD_CFLAGS_MODULE += -mlong-calls LDFLAGS += -m elf32bfin -KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index 4629038c9e5a..df48dda8a2da 100644 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -74,8 +74,13 @@ kallsyms() info KSYM ${2} local kallsymopt; + if [ -n "${CONFIG_SYMBOL_PREFIX}" ]; then + kallsymopt="${kallsymopt} \ + --symbol-prefix=${CONFIG_SYMBOL_PREFIX}" + fi + if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then - kallsymopt=--all-symbols + kallsymopt="${kallsymopt} --all-symbols" fi local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \ -- cgit v1.2.3 From 912bfe76528c287bc4812521b8d53366954b39a5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 19 Aug 2012 14:05:59 -0300 Subject: ARM: clk-imx25: Fix SSI clock registration SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/clk-imx25.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc87c9fe..4431a62fff5b 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); -- cgit v1.2.3 From 48540058612786d365602f3324ed97f9071092de Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 20 Aug 2012 09:39:22 -0300 Subject: ARM: clk-imx35: Fix SSI clock registration SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam Tested-by: Mark Brown Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org --- arch/arm/mach-imx/clk-imx35.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb10bae..65fb8bcd86cb 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -230,10 +230,8 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); -- cgit v1.2.3 From 2fc136eecd0c647a6b13fcd00d0c41a1a28f35a5 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 12 Sep 2012 12:44:30 +0100 Subject: xen/m2p: do not reuse kmap_op->dev_bus_addr If the caller passes a valid kmap_op to m2p_add_override, we use kmap_op->dev_bus_addr to store the original mfn, but dev_bus_addr is part of the interface with Xen and if we are batching the hypercalls it might not have been written by the hypervisor yet. That means that later on Xen will write to it and we'll think that the original mfn is actually what Xen has written to it. Rather than "stealing" struct members from kmap_op, keep using page->index to store the original mfn and add another parameter to m2p_remove_override to get the corresponding kmap_op instead. It is now responsibility of the caller to keep track of which kmap_op corresponds to a particular page in the m2p_override (gntdev, the only user of this interface that passes a valid kmap_op, is already doing that). CC: stable@kernel.org Reported-and-Tested-By: Sander Eikelenboom Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/include/asm/xen/page.h | 3 ++- arch/x86/xen/p2m.c | 27 +++++++++++---------------- drivers/block/xen-blkback/blkback.c | 2 +- drivers/xen/gntdev.c | 5 +++-- drivers/xen/grant-table.c | 6 ++++-- include/xen/grant_table.h | 3 ++- 6 files changed, 23 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 93971e841dd5..472b9b783019 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -51,7 +51,8 @@ extern unsigned long set_phys_range_identity(unsigned long pfn_s, extern int m2p_add_override(unsigned long mfn, struct page *page, struct gnttab_map_grant_ref *kmap_op); -extern int m2p_remove_override(struct page *page, bool clear_pte); +extern int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op); extern struct page *m2p_find_override(unsigned long mfn); extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn); diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 76ba0e97e530..72213da605f5 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -828,9 +828,6 @@ int m2p_add_override(unsigned long mfn, struct page *page, xen_mc_issue(PARAVIRT_LAZY_MMU); } - /* let's use dev_bus_addr to record the old mfn instead */ - kmap_op->dev_bus_addr = page->index; - page->index = (unsigned long) kmap_op; } spin_lock_irqsave(&m2p_override_lock, flags); list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); @@ -857,7 +854,8 @@ int m2p_add_override(unsigned long mfn, struct page *page, return 0; } EXPORT_SYMBOL_GPL(m2p_add_override); -int m2p_remove_override(struct page *page, bool clear_pte) +int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op) { unsigned long flags; unsigned long mfn; @@ -887,10 +885,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) WARN_ON(!PagePrivate(page)); ClearPagePrivate(page); - if (clear_pte) { - struct gnttab_map_grant_ref *map_op = - (struct gnttab_map_grant_ref *) page->index; - set_phys_to_machine(pfn, map_op->dev_bus_addr); + set_phys_to_machine(pfn, page->index); + if (kmap_op != NULL) { if (!PageHighMem(page)) { struct multicall_space mcs; struct gnttab_unmap_grant_ref *unmap_op; @@ -902,13 +898,13 @@ int m2p_remove_override(struct page *page, bool clear_pte) * issued. In this case handle is going to -1 because * it hasn't been modified yet. */ - if (map_op->handle == -1) + if (kmap_op->handle == -1) xen_mc_flush(); /* - * Now if map_op->handle is negative it means that the + * Now if kmap_op->handle is negative it means that the * hypercall actually returned an error. */ - if (map_op->handle == GNTST_general_error) { + if (kmap_op->handle == GNTST_general_error) { printk(KERN_WARNING "m2p_remove_override: " "pfn %lx mfn %lx, failed to modify kernel mappings", pfn, mfn); @@ -918,8 +914,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) mcs = xen_mc_entry( sizeof(struct gnttab_unmap_grant_ref)); unmap_op = mcs.args; - unmap_op->host_addr = map_op->host_addr; - unmap_op->handle = map_op->handle; + unmap_op->host_addr = kmap_op->host_addr; + unmap_op->handle = kmap_op->handle; unmap_op->dev_bus_addr = 0; MULTI_grant_table_op(mcs.mc, @@ -930,10 +926,9 @@ int m2p_remove_override(struct page *page, bool clear_pte) set_pte_at(&init_mm, address, ptep, pfn_pte(pfn, PAGE_KERNEL)); __flush_tlb_single(address); - map_op->host_addr = 0; + kmap_op->host_addr = 0; } - } else - set_phys_to_machine(pfn, page->index); + } /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present * somewhere in this domain, even before being added to the diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 73f196ca713f..c6decb901e5e 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -337,7 +337,7 @@ static void xen_blkbk_unmap(struct pending_req *req) invcount++; } - ret = gnttab_unmap_refs(unmap, pages, invcount, false); + ret = gnttab_unmap_refs(unmap, NULL, pages, invcount); BUG_ON(ret); } diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 1ffd03bf8e10..7f1241608489 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -314,8 +314,9 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) } } - err = gnttab_unmap_refs(map->unmap_ops + offset, map->pages + offset, - pages, true); + err = gnttab_unmap_refs(map->unmap_ops + offset, + use_ptemod ? map->kmap_ops + offset : NULL, map->pages + offset, + pages); if (err) return err; diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 0bfc1ef11259..006726688baf 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -870,7 +870,8 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, EXPORT_SYMBOL_GPL(gnttab_map_refs); int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, - struct page **pages, unsigned int count, bool clear_pte) + struct gnttab_map_grant_ref *kmap_ops, + struct page **pages, unsigned int count) { int i, ret; bool lazy = false; @@ -888,7 +889,8 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, } for (i = 0; i < count; i++) { - ret = m2p_remove_override(pages[i], clear_pte); + ret = m2p_remove_override(pages[i], kmap_ops ? + &kmap_ops[i] : NULL); if (ret) return ret; } diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 11e27c3af3cb..f19fff8650e9 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -187,6 +187,7 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, struct gnttab_map_grant_ref *kmap_ops, struct page **pages, unsigned int count); int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, - struct page **pages, unsigned int count, bool clear_pte); + struct gnttab_map_grant_ref *kunmap_ops, + struct page **pages, unsigned int count); #endif /* __ASM_GNTTAB_H__ */ -- cgit v1.2.3 From 35534b201c9f115c68962c095b5a9aad204d025f Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Wed, 29 Aug 2012 15:01:22 +0200 Subject: perf/x86: Export Sandy Bridge uncore clockticks event in sysfs This patch exports the clockticks event and its encoding to user level. The clockticks event was exported for Nehalem/Westmere but not for Sandy Bridge (client). Given that it uses a special encoding, it needs to be exported to user tools, so users can do: # perf stat -a -C 0 -e uncore_cbox_0/clockticks/ sleep 1 Signed-off-by: Stephane Eranian Acked-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120829130122.GA32336@quad Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_intel_uncore.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 0a5571080e74..38e4894165b9 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -661,6 +661,11 @@ static void snb_uncore_msr_init_box(struct intel_uncore_box *box) } } +static struct uncore_event_desc snb_uncore_events[] = { + INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"), + { /* end: all zeroes */ }, +}; + static struct attribute *snb_uncore_formats_attr[] = { &format_attr_event.attr, &format_attr_umask.attr, @@ -704,6 +709,7 @@ static struct intel_uncore_type snb_uncore_cbox = { .constraints = snb_uncore_cbox_constraints, .ops = &snb_uncore_msr_ops, .format_group = &snb_uncore_format_group, + .event_descs = snb_uncore_events, }; static struct intel_uncore_type *snb_msr_uncores[] = { -- cgit v1.2.3 From bad9ac2d7f878a31cf1ae8c1ee3768077d222bcb Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 25 Jul 2012 19:12:45 +0200 Subject: perf/x86/ibs: Check syscall attribute flags Current implementation simply ignores attribute flags. Thus, there is no notification to userland of unsupported features. Check syscall's attribute flags to let userland know if a feature is supported by the kernel. This is also needed to distinguish between future kernels what might support a feature. Cc: v3.5.. Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120910093018.GO8285@erda.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event_amd_ibs.c | 12 ++++++++++++ include/linux/perf_event.h | 2 ++ 2 files changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index 7bfb5bec8630..eebd5ffe1bba 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -209,6 +209,15 @@ static int perf_ibs_precise_event(struct perf_event *event, u64 *config) return -EOPNOTSUPP; } +static const struct perf_event_attr ibs_notsupp = { + .exclude_user = 1, + .exclude_kernel = 1, + .exclude_hv = 1, + .exclude_idle = 1, + .exclude_host = 1, + .exclude_guest = 1, +}; + static int perf_ibs_init(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; @@ -229,6 +238,9 @@ static int perf_ibs_init(struct perf_event *event) if (event->pmu != &perf_ibs->pmu) return -ENOENT; + if (perf_flags(&event->attr) & perf_flags(&ibs_notsupp)) + return -EINVAL; + if (config & ~perf_ibs->config_mask) return -EINVAL; diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 33ed9d605f91..bdb41612bfec 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -274,6 +274,8 @@ struct perf_event_attr { __u64 branch_sample_type; /* enum branch_sample_type */ }; +#define perf_flags(attr) (*(&(attr)->read_format + 1)) + /* * Ioctls that can be done on a perf event fd: */ -- cgit v1.2.3 From 73e8f3d7e2cb23614d5115703d76d8e54764b641 Mon Sep 17 00:00:00 2001 From: T Makphaibulchoke Date: Tue, 28 Aug 2012 21:21:43 -0600 Subject: x86/mm/init.c: Fix devmem_is_allowed() off by one Fixing an off-by-one error in devmem_is_allowed(), which allows accesses to physical addresses 0x100000-0x100fff, an extra page past 1MB. Signed-off-by: T Makphaibulchoke Acked-by: H. Peter Anvin Cc: yinghai@kernel.org Cc: tiwai@suse.de Cc: dhowells@redhat.com Link: http://lkml.kernel.org/r/1346210503-14276-1-git-send-email-tmac@hp.com Signed-off-by: Ingo Molnar --- arch/x86/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index e0e6990723e9..ab1f6a93b527 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -319,7 +319,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, */ int devmem_is_allowed(unsigned long pagenr) { - if (pagenr <= 256) + if (pagenr < 256) return 1; if (iomem_is_exclusive(pagenr << PAGE_SHIFT)) return 0; -- cgit v1.2.3 From 636221b86ce0b3b1238c72bad7172d5227d408ac Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 13 Sep 2012 21:23:25 +0100 Subject: MIPS: Malta: Remove RTC Data Mode bootstrap breakage YAMON requires and enforces the RTC Data Mode (Register B, DM bit) to binary, that is the bit is set every time the board goes through the firmware bootstrap sequence. Likewise its calendar manipulation commands interpret or set the RTC registers unconditionally as binary, never actually checking what the value of the DM bit is, under the (correct) assumption that it has been previously set, to indicate the binary mode. A change to Linux a while ago however introduced a platform-specific tweak that clears that bit and therefore forces the data mode to BCD. This causes clock corruption and misinterpretation that has to be fixed up by user-mode tools in system startup scripts as the initial clock is often incorrect according to the BCD interpretation forced. This change removes the hack; a comment included refers to alarm code, but even if it was broken at one point by requiring the BCD mode, it should have been trivially corrected and even if not, given how rarely the alarm feature is used, that was not really a reasonable justification to break the system clock that is indeed used by virtually everything. And either way the alarm code has been since fixed anyway. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4336/ Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-platform.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'arch') diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 4c35301720e7..80562b81f0f2 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -138,11 +138,6 @@ static int __init malta_add_devices(void) if (err) return err; - /* - * Set RTC to BCD mode to support current alarm code. - */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL); - return 0; } -- cgit v1.2.3 From 57b9da32addd819b0baef5573a88fcfaf3e6699b Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 3 Sep 2012 13:49:22 +0100 Subject: ARM: 7508/1: opcodes: Don't define the thumb32 byteswapping macros for BE32 The existing __mem_to_opcode_thumb32() is incorrect for BE32 platforms. However, these don't support Thumb-2 kernels, so this option is not so relevant for those platforms anyway. This operation is complicated by the lack of unaligned memory access support prior to ARMv6. Rather than provide a "working" macro which will probably won't get used (or worse, will get misused), this patch removes the macro for BE32 kernels. People manipulating Thumb opcodes prior to ARMv6 should almost certainly be splitting these operations into halfwords anyway, using __opcode_thumb32_{first,second,compose}() and the 16-bit opcode transformations. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/opcodes.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index 19c48deda70f..6bf54f9411a6 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -49,18 +49,31 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #include #ifdef CONFIG_CPU_ENDIAN_BE8 + #define __opcode_to_mem_arm(x) swab32(x) #define __opcode_to_mem_thumb16(x) swab16(x) #define __opcode_to_mem_thumb32(x) swahb32(x) -#else + +#else /* ! CONFIG_CPU_ENDIAN_BE8 */ + #define __opcode_to_mem_arm(x) ((u32)(x)) #define __opcode_to_mem_thumb16(x) ((u16)(x)) +#ifndef CONFIG_CPU_ENDIAN_BE32 +/* + * On BE32 systems, using 32-bit accesses to store Thumb instructions will not + * work in all cases, due to alignment constraints. For now, a correct + * version is not provided for BE32. + */ #define __opcode_to_mem_thumb32(x) swahw32(x) #endif +#endif /* ! CONFIG_CPU_ENDIAN_BE8 */ + #define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x) #define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x) +#ifndef CONFIG_CPU_ENDIAN_BE32 #define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x) +#endif /* Operations specific to Thumb opcodes */ -- cgit v1.2.3 From 0ce3de23f2a520a6ac8c2179fb8f88342c4992ef Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 3 Sep 2012 13:49:23 +0100 Subject: ARM: 7509/1: opcodes: Make opcode byteswapping macros assembly-compatible Most of the existing macros don't work with assembler, due to the use of type casts and C functions from . This patch abstracts out those operations and provides simple explicit versions for use in assembly code. __opcode_is_thumb32() and __opcode_is_thumb16() are also converted to do bitmask-based testing to avoid confusion if these are used in assembly code (the assembler typically treats all arithmetic values as signed). These changes avoid the need for the compiler to pre-evaluate constant expressions used to generate opcodes. By ensuring that the forms of these expressions can be evaluated directly by the assembler, we can just stringify the expressions directly into the asm during the preprocessing pass. The alternative approach (passing the evaluated expression via an inline asm "i" constraint) gets painful because the contents of the asm and the constraints must be kept in sync. This makes the resulting macros awkward to use. Retaining the C forms of the macros allows more efficient code to be generated when opcodes are generated programmatically at run- time, but there is no way to embed run-time-generated opcodes in asm() blocks. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/opcodes.h | 97 +++++++++++++++++++++++++++++++++++------- 1 file changed, 82 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index 6bf54f9411a6..f57e417cab95 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -18,6 +18,33 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #define ARM_OPCODE_CONDTEST_UNCOND 2 +/* + * Assembler opcode byteswap helpers. + * These are only intended for use by this header: don't use them directly, + * because they will be suboptimal in most cases. + */ +#define ___asm_opcode_swab32(x) ( \ + (((x) << 24) & 0xFF000000) \ + | (((x) << 8) & 0x00FF0000) \ + | (((x) >> 8) & 0x0000FF00) \ + | (((x) >> 24) & 0x000000FF) \ +) +#define ___asm_opcode_swab16(x) ( \ + (((x) << 8) & 0xFF00) \ + | (((x) >> 8) & 0x00FF) \ +) +#define ___asm_opcode_swahb32(x) ( \ + (((x) << 8) & 0xFF00FF00) \ + | (((x) >> 8) & 0x00FF00FF) \ +) +#define ___asm_opcode_swahw32(x) ( \ + (((x) << 16) & 0xFFFF0000) \ + | (((x) >> 16) & 0x0000FFFF) \ +) +#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF) +#define ___asm_opcode_identity16(x) ((x) & 0xFFFF) + + /* * Opcode byteswap helpers * @@ -41,30 +68,58 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not * represent any valid Thumb-2 instruction. For this range, * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false. + * + * The ___asm variants are intended only for use by this header, in situations + * involving inline assembler. For .S files, the normal __opcode_*() macros + * should do the right thing. */ +#ifdef __ASSEMBLY__ -#ifndef __ASSEMBLY__ +#define ___opcode_swab32(x) ___asm_opcode_swab32(x) +#define ___opcode_swab16(x) ___asm_opcode_swab16(x) +#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x) +#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x) +#define ___opcode_identity32(x) ___asm_opcode_identity32(x) +#define ___opcode_identity16(x) ___asm_opcode_identity16(x) + +#else /* ! __ASSEMBLY__ */ #include #include +#define ___opcode_swab32(x) swab32(x) +#define ___opcode_swab16(x) swab16(x) +#define ___opcode_swahb32(x) swahb32(x) +#define ___opcode_swahw32(x) swahw32(x) +#define ___opcode_identity32(x) ((u32)(x)) +#define ___opcode_identity16(x) ((u16)(x)) + +#endif /* ! __ASSEMBLY__ */ + + #ifdef CONFIG_CPU_ENDIAN_BE8 -#define __opcode_to_mem_arm(x) swab32(x) -#define __opcode_to_mem_thumb16(x) swab16(x) -#define __opcode_to_mem_thumb32(x) swahb32(x) +#define __opcode_to_mem_arm(x) ___opcode_swab32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x) +#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x) #else /* ! CONFIG_CPU_ENDIAN_BE8 */ -#define __opcode_to_mem_arm(x) ((u32)(x)) -#define __opcode_to_mem_thumb16(x) ((u16)(x)) +#define __opcode_to_mem_arm(x) ___opcode_identity32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x) #ifndef CONFIG_CPU_ENDIAN_BE32 /* * On BE32 systems, using 32-bit accesses to store Thumb instructions will not * work in all cases, due to alignment constraints. For now, a correct * version is not provided for BE32. */ -#define __opcode_to_mem_thumb32(x) swahw32(x) +#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x) #endif #endif /* ! CONFIG_CPU_ENDIAN_BE8 */ @@ -78,15 +133,27 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); /* Operations specific to Thumb opcodes */ /* Instruction size checks: */ -#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL) -#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL) +#define __opcode_is_thumb32(x) ( \ + ((x) & 0xF8000000) == 0xE8000000 \ + || ((x) & 0xF0000000) == 0xF0000000 \ +) +#define __opcode_is_thumb16(x) ( \ + ((x) & 0xFFFF0000) == 0 \ + && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \ +) /* Operations to construct or split 32-bit Thumb instructions: */ -#define __opcode_thumb32_first(x) ((u16)((x) >> 16)) -#define __opcode_thumb32_second(x) ((u16)(x)) -#define __opcode_thumb32_compose(first, second) \ - (((u32)(u16)(first) << 16) | (u32)(u16)(second)) - -#endif /* __ASSEMBLY__ */ +#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16)) +#define __opcode_thumb32_second(x) (___opcode_identity16(x)) +#define __opcode_thumb32_compose(first, second) ( \ + (___opcode_identity32(___opcode_identity16(first)) << 16) \ + | ___opcode_identity32(___opcode_identity16(second)) \ +) +#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16)) +#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x)) +#define ___asm_opcode_thumb32_compose(first, second) ( \ + (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \ + | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \ +) #endif /* __ASM_ARM_OPCODES_H */ -- cgit v1.2.3 From a61a41a01822d48bbe53e6c1df56b88ee2f3de34 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 3 Sep 2012 13:49:24 +0100 Subject: ARM: 7510/1: opcodes: Add helpers for emitting custom opcodes This patch adds some __inst_() macros for injecting custom opcodes in assembler (both inline and in .S files). They should make it easier and cleaner to get things right in little-/big- endian/ARM/Thumb-2 kernels without a lot of #ifdefs. This pure-preprocessor approach is preferred over the alternative method of wedging extra assembler directives into the assembler input using top-level asm() blocks, since there is no way to guarantee that the compiler won't reorder those with respect to each other or with respect to non-toplevel asm() blocks, unless -fno-toplevel-reorder is passed (which is in itself somewhat undesirable because it defeats some potential optimisations). Currently _does_ silently rely on the compiler not reordering at the top level, but it seems better to avoid adding extra code which depends on this if the same result can be achieved in another way. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/opcodes.h | 69 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) (limited to 'arch') diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index f57e417cab95..f7937e1c46bf 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -156,4 +156,73 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \ ) +/* + * Opcode injection helpers + * + * In rare cases it is necessary to assemble an opcode which the + * assembler does not support directly, or which would normally be + * rejected because of the CFLAGS or AFLAGS used to build the affected + * file. + * + * Before using these macros, consider carefully whether it is feasible + * instead to change the build flags for your file, or whether it really + * makes sense to support old assembler versions when building that + * particular kernel feature. + * + * The macros defined here should only be used where there is no viable + * alternative. + * + * + * __inst_arm(x): emit the specified ARM opcode + * __inst_thumb16(x): emit the specified 16-bit Thumb opcode + * __inst_thumb32(x): emit the specified 32-bit Thumb opcode + * + * __inst_arm_thumb16(arm, thumb): emit either the specified arm or + * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * __inst_arm_thumb32(arm, thumb): emit either the specified arm or + * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * + * Note that using these macros directly is poor practice. Instead, you + * should use them to define human-readable wrapper macros to encode the + * instructions that you care about. In code which might run on ARMv7 or + * above, you can usually use the __inst_arm_thumb{16,32} macros to + * specify the ARM and Thumb alternatives at the same time. This ensures + * that the correct opcode gets emitted depending on the instruction set + * used for the kernel build. + */ +#include + +#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x)) +#define __inst_thumb32(x) ___inst_thumb32( \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \ +) +#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x)) + +#ifdef CONFIG_THUMB2_KERNEL +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \ + __inst_thumb16(thumb_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \ + __inst_thumb32(thumb_opcode) +#else +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#endif + +/* Helpers for the helpers. Don't use these directly. */ +#ifdef __ASSEMBLY__ +#define ___inst_arm(x) .long x +#define ___inst_thumb16(x) .short x +#define ___inst_thumb32(first, second) .short first, second +#else +#define ___inst_arm(x) ".long " __stringify(x) "\n\t" +#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t" +#define ___inst_thumb32(first, second) \ + ".short " __stringify(first) ", " __stringify(second) "\n\t" +#endif + #endif /* __ASM_ARM_OPCODES_H */ -- cgit v1.2.3 From 508514ed25315dd28340000831b17535d6f772da Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 3 Sep 2012 13:49:25 +0100 Subject: ARM: 7511/1: opcodes: Opcode definitions for the Virtualization Extensions For now, this patch just adds a definition for the HVC instruction. More can be added here later, as needed. Now that we have a real example of how to use the opcode injection macros properly, this patch also adds a cross-reference from the explanation in opcodes.h (since without an example, figuring out how to use the macros is not that easy). Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/opcodes-virt.h | 29 +++++++++++++++++++++++++++++ arch/arm/include/asm/opcodes.h | 2 ++ 2 files changed, 31 insertions(+) create mode 100644 arch/arm/include/asm/opcodes-virt.h (limited to 'arch') diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h new file mode 100644 index 000000000000..b85665a96f8e --- /dev/null +++ b/arch/arm/include/asm/opcodes-virt.h @@ -0,0 +1,29 @@ +/* + * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions + * Copyright (C) 2012 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARM_OPCODES_VIRT_H +#define __ASM_ARM_OPCODES_VIRT_H + +#include + +#define __HVC(imm16) __inst_arm_thumb32( \ + 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \ + 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \ +) + +#endif /* ! __ASM_ARM_OPCODES_VIRT_H */ diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index f7937e1c46bf..74e211a6fb24 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -193,6 +193,8 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); * specify the ARM and Thumb alternatives at the same time. This ensures * that the correct opcode gets emitted depending on the instruction set * used for the kernel build. + * + * Look at opcodes-virt.h for an example of how to use these macros. */ #include -- cgit v1.2.3 From 9d4876f039a086eeb599a8fac684c9a8daa64ab1 Mon Sep 17 00:00:00 2001 From: Yilu Mao Date: Mon, 3 Sep 2012 09:14:56 +0100 Subject: ARM: 7507/1: cache-l2x0.c: save the final aux ctrl value for resuming There is a bug if l2x0 controller has been enabled when calling l2x0_init, the aux ctrl register will not be saved in l2x0_saved_regs. Therefore we will use uninitialized l2x0_saved_regs.aux_ctrl for resuming later. In this patch, the aux ctrl value is read and saved after it is initialized. So we have the real value being set for resuming. Link: http://lkml.kernel.org/r/1336046857-24133-1-git-send-email-ylmao@marvell.com Signed-off-by: Yilu Mao Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 2a8e380501e8..97ec2565805a 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -368,14 +368,18 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); - l2x0_saved_regs.aux_ctrl = aux; - l2x0_inv_all(); /* enable L2X0 */ writel_relaxed(1, l2x0_base + L2X0_CTRL); } + /* Re-read it in case some bits are reserved. */ + aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + + /* Save the value for resuming. */ + l2x0_saved_regs.aux_ctrl = aux; + outer_cache.inv_range = l2x0_inv_range; outer_cache.clean_range = l2x0_clean_range; outer_cache.flush_range = l2x0_flush_range; -- cgit v1.2.3 From a42c362980430be74b77ec8f374964f61062379f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 9 Sep 2012 18:39:28 +0100 Subject: ARM: Add irqtime accounting support Add support for irq time accounting. This commit prepares ARM by adding the call to enable_sched_clock_irqtime() in sched_clock(). We introduce a new kernel parameter - irqtime - which takes an integer. -1 for auto, 0 for disabled, and 1 for enabled. Auto mode selects IRQ accounting if we have a sched_clock() tick rate greater than 1MHz. Frederic Weisbecker is working on a patch set which moves the IRQ_TIME_ACCOUNTING into arch/, so that part is not incorporated into this patch; this facility becomes available on ARM only when both this patch and Frederic's patches are merged. Signed-off-by: Russell King --- arch/arm/kernel/sched_clock.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc06..9b8451a4330f 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -25,6 +26,9 @@ struct clock_data { static void sched_clock_poll(unsigned long wrap_ticks); static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); +static int irqtime = -1; + +core_param(irqtime, irqtime, int, 0400); static struct clock_data cd = { .mult = NSEC_PER_SEC / HZ, @@ -145,6 +149,10 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0; + /* Enable IRQ time accounting if we have a fast enough sched_clock */ + if (irqtime > 0 || (irqtime == -1 && rate >= 1000000)) + enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); } -- cgit v1.2.3 From a761cebfd7cbeaf9a3a0c6960508ca1daaebb67e Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 10 Sep 2012 11:50:45 +0100 Subject: ARM: Fix build warning in arch/arm/mm/alignment.c Fix this harmless build warning: arch/arm/mm/alignment.c: In function 'do_alignment': arch/arm/mm/alignment.c:749:21: warning: 'offset.un' may be used uninitialized in this function This is caused by the compiler not being able to properly analyse the code to prove that offset.un is assigned in every case. The case it struggles with is where we assign the handler from the Thumb parser - do_alignment_t32_to_handler(). As this starts by zeroing this variable via a pointer, move it into the calling function. This fixes the warning. Signed-off-by: Russell King --- arch/arm/mm/alignment.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 9107231aacc5..b9f60ebe3bc4 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -699,7 +699,6 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, unsigned long instr = *pinstr; u16 tinst1 = (instr >> 16) & 0xffff; u16 tinst2 = instr & 0xffff; - poffset->un = 0; switch (tinst1 & 0xffe0) { /* A6.3.5 Load/Store multiple */ @@ -854,9 +853,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) break; case 0x08000000: /* ldm or stm, or thumb-2 32bit instruction */ - if (thumb2_32b) + if (thumb2_32b) { + offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - else + } else handler = do_alignment_ldmstm; break; -- cgit v1.2.3 From e50a622deaf6b1a7dd2b9fb60975dd1d5406db37 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 6 Sep 2012 18:09:33 +0100 Subject: ARM: 7520/1: Build dtb files in all target Tools like kisskb are good at finding build regressions in the kernel sources. However, regressions in the DT desscriptions are not found, because generally these build systems don't build the DT binary blobs. Extend the ARM all target to build all enabled DTB files. Signed-off-by: Andrew Lunn Acked-by: Jason Cooper Reviewed-by: Dave Martin Acked-by: Olof Johansson Signed-off-by: Russell King --- arch/arm/Makefile | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6d..0457ef4d8c86 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -268,7 +268,12 @@ else KBUILD_IMAGE := zImage endif -all: $(KBUILD_IMAGE) +# Build the DT binary blobs if we have OF configured +ifeq ($(CONFIG_USE_OF),y) +KBUILD_DTBS := dtbs +endif + +all: $(KBUILD_IMAGE) $(KBUILD_DTBS) boot := arch/arm/boot @@ -306,7 +311,7 @@ define archhelp echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=)' - echo ' dtbs - Build device tree blobs for enabled boards' + echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' uinstall - Install U-Boot wrapped compressed kernel' -- cgit v1.2.3 From 38ef2ad5f1d704f1a41599fc70488ca51eb56d3f Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 10 Sep 2012 16:36:37 +0100 Subject: ARM: 7531/1: mark kernelmode mem{cpy,set} non-experimental This feature was added in 2009, I've been using it off and on and never had any problems with it on my systems. I cannot see why it needs to be marked experimental, make it a normal feature and let us discover its possible shortcomings as people try to turn it on instead. Cc: Lennert Buytenhek Cc: Nicolas Pitre Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5..aee8f3ada7ae 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1855,8 +1855,8 @@ config ALIGNMENT_TRAP configuration it is safe to say N, otherwise say Y. config UACCESS_WITH_MEMCPY - bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" - depends on MMU && EXPERIMENTAL + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" + depends on MMU default y if CPU_FEROCEON help Implement faster copy_to_user and clear_user methods for CPU -- cgit v1.2.3 From 8ef997b67f0d779c82e7e533a792c5a6837594cd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 11 Sep 2012 19:56:23 +0100 Subject: ARM: 7534/1: clk: Make the managed clk functions generically available The managed clk functions are currently only available when the generic clk lookup framework is build. But the managed clk functions are merely wrappers around clk_get and clk_put and do not depend on any specifics of the generic lookup functions and there are still quite a few custom implementations of the clk API. So make the managed functions available whenever the clk API is implemented. The patch also removes the custom implementation of devm_clk_get for the coldfire platform. Signed-off-by: Lars-Peter Clausen Acked-by: Greg Ungerer Signed-off-by: Russell King --- arch/m68k/platform/coldfire/clk.c | 6 ----- drivers/clk/Makefile | 1 + drivers/clk/clk-devres.c | 55 +++++++++++++++++++++++++++++++++++++++ drivers/clk/clkdev.c | 45 -------------------------------- 4 files changed, 56 insertions(+), 51 deletions(-) create mode 100644 drivers/clk/clk-devres.c (limited to 'arch') diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c index 75f9ee967ea7..9cd13b4ce42b 100644 --- a/arch/m68k/platform/coldfire/clk.c +++ b/arch/m68k/platform/coldfire/clk.c @@ -146,9 +146,3 @@ struct clk_ops clk_ops1 = { }; #endif /* MCFPM_PPMCR1 */ #endif /* MCFPM_PPMCR0 */ - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - return NULL; -} -EXPORT_SYMBOL(devm_clk_get); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5869ea387054..72ce247a0e8d 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,4 +1,5 @@ # common clock types +obj-$(CONFIG_HAVE_CLK) += clk-devres.o obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c new file mode 100644 index 000000000000..f1e7a83426cc --- /dev/null +++ b/drivers/clk/clk-devres.c @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +static void devm_clk_release(struct device *dev, void *res) +{ + clk_put(*(struct clk **)res); +} + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + struct clk **ptr, *clk; + + ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + clk = clk_get(dev, id); + if (!IS_ERR(clk)) { + *ptr = clk; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return clk; +} +EXPORT_SYMBOL(devm_clk_get); + +static int devm_clk_match(struct device *dev, void *res, void *data) +{ + struct clk **c = res; + if (!c || !*c) { + WARN_ON(!c || !*c); + return 0; + } + return *c == data; +} + +void devm_clk_put(struct device *dev, struct clk *clk) +{ + int ret; + + ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_clk_put); diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index d423c9bdd71a..442a31363873 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -171,51 +171,6 @@ void clk_put(struct clk *clk) } EXPORT_SYMBOL(clk_put); -static void devm_clk_release(struct device *dev, void *res) -{ - clk_put(*(struct clk **)res); -} - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - struct clk **ptr, *clk; - - ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - clk = clk_get(dev, id); - if (!IS_ERR(clk)) { - *ptr = clk; - devres_add(dev, ptr); - } else { - devres_free(ptr); - } - - return clk; -} -EXPORT_SYMBOL(devm_clk_get); - -static int devm_clk_match(struct device *dev, void *res, void *data) -{ - struct clk **c = res; - if (!c || !*c) { - WARN_ON(!c || !*c); - return 0; - } - return *c == data; -} - -void devm_clk_put(struct device *dev, struct clk *clk) -{ - int ret; - - ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); - - WARN_ON(ret); -} -EXPORT_SYMBOL(devm_clk_put); - void clkdev_add(struct clk_lookup *cl) { mutex_lock(&clocks_mutex); -- cgit v1.2.3 From e1e5b7e4251c7538ca08c2c5545b0c2fbd8a6635 Mon Sep 17 00:00:00 2001 From: Matthew Leach Date: Tue, 11 Sep 2012 17:56:57 +0100 Subject: ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores This patch zeroes the SCTLR.TRE bit prior to setting the mapping as cacheable for ARMv7 cores in the decompressor, ensuring that the memory region attributes are obtained from the C and B bits, not from the page tables. Cc: Nicolas Pitre Reviewed-by: Will Deacon Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Cc: Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 81769c1341fa..bc67cbff3944 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -653,6 +653,7 @@ __armv7_mmu_cache_on: mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs #endif mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer #ifdef CONFIG_MMU -- cgit v1.2.3 From 9bf26a180578b92890ed77890d4e9e9807adcda3 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Sep 2012 09:06:52 +0100 Subject: ARM: 7514/1: integrator: call common init function from machine There is currently a common integrator_init() function set up to be called from an arch_initcall(). The problem is that it is using machine_is_integrator() which is not working with device tree, let's call this from respective machine initilization function and add a parameter to tell whether it's the Integrator/AP or Integrator/CP instead. There are still machine_is*() calls in the Integrator machines directory, but this one needs to be fixed lest we don't even get a UART console on the Integrator/AP after a Device Tree boot. Acked-by: Arnd Bergmann Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-integrator/common.h | 1 + arch/arm/mach-integrator/core.c | 6 ++---- arch/arm/mach-integrator/integrator_ap.c | 2 ++ arch/arm/mach-integrator/integrator_cp.c | 1 + 4 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 899561d8db28..c4338e2fc631 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,3 +1,4 @@ void integrator_init_early(void); +int integrator_init(bool is_cp); void integrator_reserve(void); void integrator_restart(char, const char *); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 3fa6c51390da..5ba4bc8c0aa3 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -61,7 +61,7 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; -static int __init integrator_init(void) +int __init integrator_init(bool is_cp) { int i; @@ -70,7 +70,7 @@ static int __init integrator_init(void) * hard-code them. The Integator/CP and forward have proper cell IDs. * Else we leave them undefined to the bus driver can autoprobe them. */ - if (machine_is_integrator()) { + if (!is_cp) { rtc_device.periphid = 0x00041030; uart0_device.periphid = 0x00041010; uart1_device.periphid = 0x00041010; @@ -86,8 +86,6 @@ static int __init integrator_init(void) return 0; } -arch_initcall(integrator_init); - /* * On the Integrator platform, the port RTS and DTR are provided by * bits in the following SC_CTRLS register bits: diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 3b2267529f5e..ff966d83281c 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -312,6 +312,8 @@ static void __init ap_init(void) lm_device_register(lmdev); } + + integrator_init(false); } /* diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 82d5c837cc74..2b40bc10b388 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -366,6 +366,7 @@ static void __init intcp_init(void) struct amba_device *d = amba_devs[i]; amba_device_register(d, &iomem_resource); } + integrator_init(true); } #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) -- cgit v1.2.3 From 2c88543b953581f70f05bf133a1b8f196c48ef23 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Sep 2012 09:07:27 +0100 Subject: ARM: 7515/1: integrator: check PL010 base address from resource In the PL010 UART callback a comparison against the location of the statically allocated PL010 device is done to figure out which UART is doing the callback. This does not play well with dynamic devices such as in device tree, so let's check the base address of the memory resource inside the amba_device instead. Acked-by: Arnd Bergmann Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-integrator/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 5ba4bc8c0aa3..268eadf6d3e6 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -99,11 +99,14 @@ int __init integrator_init(bool is_cp) static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + u32 phybase = dev->res.start; - if (dev == &uart0_device) { + if (phybase == INTEGRATOR_UART0_BASE) { + /* UART0 */ rts_mask = 1 << 4; dtr_mask = 1 << 5; } else { + /* UART1 */ rts_mask = 1 << 6; dtr_mask = 1 << 7; } -- cgit v1.2.3 From e376fdf42062e7373b82093b278f99aa2b547db7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 17 Sep 2012 01:23:21 +0200 Subject: MIPS: Malta: Don't crash on spurious interrupt. 48d480b0bde794781fcae9501fb043c1bac0e523 [[MIPS] Malta: Fix off by one bug in interrupt handler.] did not take in account that irq_ffs() will also return 0 if for some reason the set of pending interrupts happens to be empty. This is trivial to trigger with a RM5261 CPU module running a 64-bit kernel and results in something like the following: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff801772d0, ra == ffffffff8017ad24 Oops[#1]: Cpu 0 $ 0 : 0000000000000000 ffffffff9000a4e0 ffffffff9000a4e0 ffffffff9000a4e0 $ 4 : ffffffff80592be0 0000000000000000 00000000000000d6 ffffffff80322ed0 $ 8 : ffffffff805fe538 0000000000000000 ffffffff9000a4e0 ffffffff80590000 $12 : 00000000000000d6 0000000000000000 ffffffff80600000 ffffffff805fe538 $16 : 0000000000000000 0000000000000010 ffffffff80592be0 0000000000000010 $20 : 0000000000000000 0000000000500001 0000000000000000 ffffffff8051e078 $24 : 0000000000000028 ffffffff803226e8 $28 : 9800000003828000 980000000382b900 ffffffff8051e060 ffffffff8017ad24 Hi : 0000000000000000 Lo : 0000006388974000 epc : ffffffff801772d0 handle_irq_event_percpu+0x70/0x2f0 Not tainted ra : ffffffff8017ad24 handle_percpu_irq+0x54/0x88 Status: 9000a4e2 KX SX UX KERNEL EXL Cause : 00808008 BadVA : 0000000000000000 PrId : 000028a0 (Nevada) Modules linked in: Process init (pid: 1, threadinfo=9800000003828000, task=9800000003827968, tls=0000000077087490) Stack : ffffffff80592be0 ffffffff8058d248 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ffffffff805a0000 0000000000000882 9800000003b89000 ffffffff8017ad24 00000000000000d5 0000000000000010 ffffffff9000a4e1 ffffffff801769f4 ffffffff9000a4e0 ffffffff801037f8 0000000000000000 ffffffff80101c44 0000000000000000 ffffffff9000a4e0 0000000000000000 9000000018000000 90000000180003f9 0000000000000001 0000000000000000 00000000000000ff 0000000000000018 0000000000000001 0000000000000001 00000000003fffff 0000000000000020 ffffffff802cf7ac ffffffff80208918 000000007fdadf08 ffffffff80612d88 ffffffff9000a4e1 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ... Call Trace: [] handle_irq_event_percpu+0x70/0x2f0 [] handle_percpu_irq+0x54/0x88 [] generic_handle_irq+0x44/0x60 [] do_IRQ+0x48/0x70 [] ret_from_irq+0x0/0x4 [] serial8250_startup+0x310/0x870 [] uart_startup.part.7+0x9c/0x330 [] uart_open+0x15c/0x1b0 [] tty_open+0x1fc/0x720 [] chrdev_open+0x7c/0x180 [] do_dentry_open.isra.14+0x288/0x390 [] nameidata_to_filp+0x5c/0xc0 [] do_last.isra.33+0x330/0x8f0 [] path_openat+0xbc/0x440 [] do_filp_open+0x38/0xa8 [] do_sys_open+0x124/0x218 [] handle_sys+0x118/0x13c Code: 02d5a825 12800012 02a0b02d de850008 0040f809 0220202d 0040a82d 40026000 ---[ end trace 5d8e7b9a86badd2d ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-int.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 7b13a4caeea4..fea823f18479 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -273,16 +273,19 @@ asmlinkage void plat_irq_dispatch(void) unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; int irq; + if (unlikely(!pending)) { + spurious_interrupt(); + return; + } + irq = irq_ffs(pending); if (irq == MIPSCPU_INT_I8259A) malta_hw0_irqdispatch(); else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) malta_ipi_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); else - spurious_interrupt(); + do_IRQ(MIPS_CPU_IRQ_BASE + irq); } #ifdef CONFIG_MIPS_MT_SMP -- cgit v1.2.3 From dbc5e1e89aafd484ad279ec6b9267dcd2c67df3f Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Mon, 27 Aug 2012 09:42:37 -0700 Subject: ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent From 0cdf3aff, "ARM: SAMSUNG: use spin_lock_irqsave() in clk_{enable,disable}": The clk_enable()and clk_disable() can be used process and ISR either. And actually it is used for real product and other platforms use it now. So spin_lock_irqsave() should be used instead. We need to make a similar change in clk_set_parent(). Otherwise, you can potentially get spinlock recursion: BUG: spinlock recursion on CPU#0, kinteractive/68 lock: 807832a8, .magic: dead4ead, .owner: kinteractive/68, .owner_cpu: 0 [<80015f54>] (unwind_backtrace+0x0/0x128) from [<804f2914>] (dump_stack+0x20/0x24) [<804f2914>] (dump_stack+0x20/0x24) from [<804f57b8>] (spin_dump+0x80/0x94) [<804f57b8>] (spin_dump+0x80/0x94) from [<804f57f8>] (spin_bug+0x2c/0x30) [<804f57f8>] (spin_bug+0x2c/0x30) from [<80222730>] (do_raw_spin_lock+0x54/0x150) [<80222730>] (do_raw_spin_lock+0x54/0x150) from [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) from [<80022ea4>] (clk_enable+0x3c/0x84) [<80022ea4>] (clk_enable+0x3c/0x84) from [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) from [<8038645c>] (s5p_mfc_read_info+0x20/0x38) [<8038645c>] (s5p_mfc_read_info+0x20/0x38) from [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) from [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) from [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) from [<8007fe78>] (handle_irq_event+0x4c/0x6c) [<8007fe78>] (handle_irq_event+0x4c/0x6c) from [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) from [<8007f424>] (generic_handle_irq+0x3c/0x50) [<8007f424>] (generic_handle_irq+0x3c/0x50) from [<8000f7c4>] (handle_IRQ+0x88/0xc8) [<8000f7c4>] (handle_IRQ+0x88/0xc8) from [<80008564>] (gic_handle_irq+0x44/0x68) [<80008564>] (gic_handle_irq+0x44/0x68) from [<8000e400>] (__irq_svc+0x40/0x60) Exception stack(0xef3cbe68 to 0xef3cbeb0) [<8000e400>] (__irq_svc+0x40/0x60) from [<80022cfc>] (clk_set_parent+0x30/0x74) [<80022cfc>] (clk_set_parent+0x30/0x74) from [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) from [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) from [<803ac280>] (exynos_target+0x1b0/0x220) [<803ac280>] (exynos_target+0x1b0/0x220) from [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) from [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) from [<80047d04>] (kthread+0x9c/0xa8) [<80047d04>] (kthread+0x9c/0xa8) from [<8000fa48>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Mandeep Singh Baines Suggested-by: Sunil Mazhavanchery Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: Ben Dooks Cc: Russell King Cc: Minho Ban Cc: Jaecheol Lee Cc: Sunyoung Kang Cc: Olof Johansson Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/clock.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 65c5eca475e7..80eacca4682a 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -173,17 +173,18 @@ struct clk *clk_get_parent(struct clk *clk) int clk_set_parent(struct clk *clk, struct clk *parent) { + unsigned long flags; int ret = 0; if (IS_ERR(clk)) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); if (clk->ops && clk->ops->set_parent) ret = (clk->ops->set_parent)(clk, parent); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } -- cgit v1.2.3 From 4db84d4f07b87c452c6000e0595dc9570ed21b41 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Mon, 10 Sep 2012 16:43:26 +0200 Subject: s390/mm: fix user access page-table walk code The s390 page-table walk code, used for user copy and futex, currently cannot handle huge pages. As far as user copy is concerned, that is not really a problem because those functions will only be used on old hardware that has no huge page support. But the futex code will also use pagetable walk functions on current hardware when user space runs in primary space mode. So, if a futex sits in a huge page, the futex operation on it will result in a page fault loop or even data corruption. This patch adds the code for resolving huge page mappings in the user access pagetable walk code on s390. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/lib/uaccess_pt.c | 142 ++++++++++++++++++++------------------------- 1 file changed, 63 insertions(+), 79 deletions(-) (limited to 'arch') diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 60ee2b883797..2d37bb861faf 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -2,69 +2,82 @@ * User access functions based on page table walks for enhanced * system layout without hardware support. * - * Copyright IBM Corp. 2006 + * Copyright IBM Corp. 2006, 2012 * Author(s): Gerald Schaefer (gerald.schaefer@de.ibm.com) */ #include #include #include +#include #include #include #include "uaccess.h" -static inline pte_t *follow_table(struct mm_struct *mm, unsigned long addr) + +/* + * Returns kernel address for user virtual address. If the returned address is + * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address + * contains the (negative) exception code. + */ +static __always_inline unsigned long follow_table(struct mm_struct *mm, + unsigned long addr, int write) { pgd_t *pgd; pud_t *pud; pmd_t *pmd; + pte_t *ptep; pgd = pgd_offset(mm, addr); if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) - return (pte_t *) 0x3a; + return -0x3aUL; pud = pud_offset(pgd, addr); if (pud_none(*pud) || unlikely(pud_bad(*pud))) - return (pte_t *) 0x3b; + return -0x3bUL; pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) - return (pte_t *) 0x10; + if (pmd_none(*pmd)) + return -0x10UL; + if (pmd_huge(*pmd)) { + if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO)) + return -0x04UL; + return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK); + } + if (unlikely(pmd_bad(*pmd))) + return -0x10UL; + + ptep = pte_offset_map(pmd, addr); + if (!pte_present(*ptep)) + return -0x11UL; + if (write && !pte_write(*ptep)) + return -0x04UL; - return pte_offset_map(pmd, addr); + return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK); } static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, size_t n, int write_user) { struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, size; - pte_t *pte; + unsigned long offset, done, size, kaddr; void *from, *to; done = 0; retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) + kaddr = follow_table(mm, uaddr, write_user); + if (IS_ERR_VALUE(kaddr)) goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; - goto fault; - } else if (write_user && !pte_write(*pte)) { - pte = (pte_t *) 0x04; - goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE - 1); + offset = uaddr & ~PAGE_MASK; size = min(n - done, PAGE_SIZE - offset); if (write_user) { - to = (void *)((pfn << PAGE_SHIFT) + offset); + to = (void *) kaddr; from = kptr + done; } else { - from = (void *)((pfn << PAGE_SHIFT) + offset); + from = (void *) kaddr; to = kptr + done; } memcpy(to, from, size); @@ -75,7 +88,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, write_user)) + if (__handle_fault(uaddr, -kaddr, write_user)) return n - done; goto retry; } @@ -84,27 +97,22 @@ fault: * Do DAT for user address by page table walk, return kernel address. * This function needs to be called with current->mm->page_table_lock held. */ -static __always_inline unsigned long __dat_user_addr(unsigned long uaddr) +static __always_inline unsigned long __dat_user_addr(unsigned long uaddr, + int write) { struct mm_struct *mm = current->mm; - unsigned long pfn; - pte_t *pte; + unsigned long kaddr; int rc; retry: - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, write); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1)); + return kaddr; fault: spin_unlock(&mm->page_table_lock); - rc = __handle_fault(uaddr, (unsigned long) pte, 0); + rc = __handle_fault(uaddr, -kaddr, write); spin_lock(&mm->page_table_lock); if (!rc) goto retry; @@ -159,11 +167,9 @@ static size_t clear_user_pt(size_t n, void __user *to) static size_t strnlen_user_pt(size_t count, const char __user *src) { - char *addr; unsigned long uaddr = (unsigned long) src; struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, len; - pte_t *pte; + unsigned long offset, done, len, kaddr; size_t len_str; if (segment_eq(get_fs(), KERNEL_DS)) @@ -172,19 +178,13 @@ static size_t strnlen_user_pt(size_t count, const char __user *src) retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, 0); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE-1); - addr = (char *)(pfn << PAGE_SHIFT) + offset; + offset = uaddr & ~PAGE_MASK; len = min(count - done, PAGE_SIZE - offset); - len_str = strnlen(addr, len); + len_str = strnlen((char *) kaddr, len); done += len_str; uaddr += len_str; } while ((len_str == len) && (done < count)); @@ -192,7 +192,7 @@ retry: return done + 1; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, 0)) + if (__handle_fault(uaddr, -kaddr, 0)) return 0; goto retry; } @@ -225,11 +225,10 @@ static size_t copy_in_user_pt(size_t n, void __user *to, const void __user *from) { struct mm_struct *mm = current->mm; - unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to, - uaddr, done, size, error_code; + unsigned long offset_max, uaddr, done, size, error_code; unsigned long uaddr_from = (unsigned long) from; unsigned long uaddr_to = (unsigned long) to; - pte_t *pte_from, *pte_to; + unsigned long kaddr_to, kaddr_from; int write_user; if (segment_eq(get_fs(), KERNEL_DS)) { @@ -242,38 +241,23 @@ retry: do { write_user = 0; uaddr = uaddr_from; - pte_from = follow_table(mm, uaddr_from); - error_code = (unsigned long) pte_from; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_from)) { - error_code = 0x11; + kaddr_from = follow_table(mm, uaddr_from, 0); + error_code = kaddr_from; + if (IS_ERR_VALUE(error_code)) goto fault; - } write_user = 1; uaddr = uaddr_to; - pte_to = follow_table(mm, uaddr_to); - error_code = (unsigned long) pte_to; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_to)) { - error_code = 0x11; + kaddr_to = follow_table(mm, uaddr_to, 1); + error_code = (unsigned long) kaddr_to; + if (IS_ERR_VALUE(error_code)) goto fault; - } else if (!pte_write(*pte_to)) { - error_code = 0x04; - goto fault; - } - pfn_from = pte_pfn(*pte_from); - pfn_to = pte_pfn(*pte_to); - offset_from = uaddr_from & (PAGE_SIZE-1); - offset_to = uaddr_from & (PAGE_SIZE-1); - offset_max = max(offset_from, offset_to); + offset_max = max(uaddr_from & ~PAGE_MASK, + uaddr_to & ~PAGE_MASK); size = min(n - done, PAGE_SIZE - offset_max); - memcpy((void *)(pfn_to << PAGE_SHIFT) + offset_to, - (void *)(pfn_from << PAGE_SHIFT) + offset_from, size); + memcpy((void *) kaddr_to, (void *) kaddr_from, size); done += size; uaddr_from += size; uaddr_to += size; @@ -282,7 +266,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, error_code, write_user)) + if (__handle_fault(uaddr, -error_code, write_user)) return n - done; goto retry; } @@ -341,7 +325,7 @@ int futex_atomic_op_pt(int op, u32 __user *uaddr, int oparg, int *old) return __futex_atomic_op_pt(op, uaddr, oparg, old); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; @@ -378,7 +362,7 @@ int futex_atomic_cmpxchg_pt(u32 *uval, u32 __user *uaddr, return __futex_atomic_cmpxchg_pt(uval, uaddr, oldval, newval); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; -- cgit v1.2.3 From 51ac51a6a5ab5f0aff46c4757ba4c32f3f8f7a2e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 13 Sep 2012 12:40:26 +0200 Subject: ARM: at91: fix missing #interrupt-cells on gpio-controller Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Tested-by: Bo Shen Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9260.dtsi | 3 +++ arch/arm/boot/dts/at91sam9263.dtsi | 5 +++++ arch/arm/boot/dts/at91sam9g45.dtsi | 5 +++++ arch/arm/boot/dts/at91sam9n12.dtsi | 4 ++++ arch/arm/boot/dts/at91sam9x5.dtsi | 4 ++++ 5 files changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 66389c1c6f62..7c95f76398de 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -104,6 +104,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -113,6 +114,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -122,6 +124,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index b460d6ce9eb5..195019b7ca0e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -95,6 +95,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -104,6 +105,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -113,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -122,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -131,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bafa8806fc17..63751b1e744b 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -122,6 +123,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -131,6 +133,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -140,6 +143,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -149,6 +153,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bfac0dfc332c..ef9336ae9614 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -107,6 +107,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -116,6 +117,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -125,6 +127,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -134,6 +137,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4a18c393b136..8a387a8d61b7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -115,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -124,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -133,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -142,6 +145,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { -- cgit v1.2.3 From 9bc1503185a09930782012fda5601694caeec77a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Sep 2012 09:07:57 +0100 Subject: ARM: 7516/1: plat-versatile: add DT support to FPGA IRQ This adds Device Tree probing support to the Versatile FPGA IRQ controller. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- .../devicetree/bindings/arm/versatile-fpga-irq.txt | 31 ++++++++++ arch/arm/plat-versatile/fpga-irq.c | 72 +++++++++++++++++++--- arch/arm/plat-versatile/include/plat/fpga-irq.h | 2 + 3 files changed, 95 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt new file mode 100644 index 000000000000..9989eda755d9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -0,0 +1,31 @@ +* ARM Versatile FPGA interrupt controller + +One or more FPGA IRQ controllers can be synthesized in an ARM reference board +such as the Integrator or Versatile family. The output of these different +controllers are OR:ed together and fed to the CPU tile's IRQ input. Each +instance can handle up to 32 interrupts. + +Required properties: +- compatible: "arm,versatile-fpga-irq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. Must be 1 + as the FPGA IRQ controller has no configuration options for interrupt + sources. The cell is a u32 and defines the interrupt number. +- reg: The register bank for the FPGA interrupt controller. +- clear-mask: a u32 number representing the mask written to clear all IRQs + on the controller at boot for example. +- valid-mask: a u32 number representing a bit mask determining which of + the interrupts are valid. Unconnected/unused lines are set to 0, and + the system till not make it possible for devices to request these + interrupts. + +Example: + +pic: pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x003fffff>; +}; diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c index 6e70d03824a1..091ae1030045 100644 --- a/arch/arm/plat-versatile/fpga-irq.c +++ b/arch/arm/plat-versatile/fpga-irq.c @@ -5,6 +5,8 @@ #include #include #include +#include +#include #include #include @@ -14,11 +16,17 @@ #define IRQ_RAW_STATUS 0x04 #define IRQ_ENABLE_SET 0x08 #define IRQ_ENABLE_CLEAR 0x0c +#define INT_SOFT_SET 0x10 +#define INT_SOFT_CLEAR 0x14 +#define FIQ_STATUS 0x20 +#define FIQ_RAW_STATUS 0x24 +#define FIQ_ENABLE 0x28 +#define FIQ_ENABLE_SET 0x28 +#define FIQ_ENABLE_CLEAR 0x2C /** * struct fpga_irq_data - irq data container for the FPGA IRQ controller * @base: memory offset in virtual memory - * @irq_start: first IRQ number handled by this instance * @chip: chip container for this instance * @domain: IRQ domain for this instance * @valid: mask for valid IRQs on this controller @@ -26,7 +34,6 @@ */ struct fpga_irq_data { void __iomem *base; - unsigned int irq_start; struct irq_chip chip; u32 valid; struct irq_domain *domain; @@ -125,34 +132,79 @@ static struct irq_domain_ops fpga_irqdomain_ops = { .xlate = irq_domain_xlate_onetwocell, }; -void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, - int parent_irq, u32 valid, struct device_node *node) -{ +static __init struct fpga_irq_data * +fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) { struct fpga_irq_data *f; if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); - return; + return NULL; } - f = &fpga_irq_devices[fpga_irq_id]; f->base = base; - f->irq_start = irq_start; f->chip.name = name; f->chip.irq_ack = fpga_irq_mask; f->chip.irq_mask = fpga_irq_mask; f->chip.irq_unmask = fpga_irq_unmask; f->valid = valid; + fpga_irq_id++; + + return f; +} + +void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, + int parent_irq, u32 valid, struct device_node *node) +{ + struct fpga_irq_data *f; + + f = fpga_irq_prep_struct(base, name, valid); + if (!f) + return; if (parent_irq != -1) { irq_set_handler_data(parent_irq, f); irq_set_chained_handler(parent_irq, fpga_irq_handle); } - f->domain = irq_domain_add_legacy(node, fls(valid), f->irq_start, 0, + f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0, &fpga_irqdomain_ops, f); pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", fpga_irq_id, name, base, f->used_irqs); +} - fpga_irq_id++; +#ifdef CONFIG_OF +int __init fpga_irq_of_init(struct device_node *node, + struct device_node *parent) +{ + struct fpga_irq_data *f; + void __iomem *base; + u32 clear_mask; + u32 valid_mask; + + if (WARN_ON(!node)) + return -ENODEV; + + base = of_iomap(node, 0); + WARN(!base, "unable to map fpga irq registers\n"); + + if (of_property_read_u32(node, "clear-mask", &clear_mask)) + clear_mask = 0; + + if (of_property_read_u32(node, "valid-mask", &valid_mask)) + valid_mask = 0; + + f = fpga_irq_prep_struct(base, node->name, valid_mask); + if (!f) + return -ENOMEM; + + writel(clear_mask, base + IRQ_ENABLE_CLEAR); + writel(clear_mask, base + FIQ_ENABLE_CLEAR); + + f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f); + f->used_irqs = hweight32(valid_mask); + + pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", + fpga_irq_id, node->name, base, f->used_irqs); + return 0; } +#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h index 91bcfb67551d..1fac9651d3ca 100644 --- a/arch/arm/plat-versatile/include/plat/fpga-irq.h +++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h @@ -7,5 +7,7 @@ struct pt_regs; void fpga_handle_irq(struct pt_regs *regs); void fpga_irq_init(void __iomem *, const char *, int, int, u32, struct device_node *node); +int fpga_irq_of_init(struct device_node *node, + struct device_node *parent); #endif -- cgit v1.2.3 From 4980f9bc2cec0f8ff0e0f2b021d46c7606ae1849 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Sep 2012 09:08:24 +0100 Subject: ARM: 7517/1: integrator: initial device tree support This is initial device tree support for the ARM Integrator family, we create a very basic device tree, #ifdef out the non-DT machines when compiling for device tree. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- Documentation/devicetree/bindings/arm/arm-boards | 12 ++ arch/arm/boot/dts/integrator.dtsi | 33 +++++ arch/arm/boot/dts/integratorap.dts | 36 ++++++ arch/arm/boot/dts/integratorcp.dts | 54 ++++++++ arch/arm/mach-integrator/integrator_ap.c | 139 ++++++++++++++++---- arch/arm/mach-integrator/integrator_cp.c | 154 ++++++++++++++++------- 6 files changed, 360 insertions(+), 68 deletions(-) create mode 100644 arch/arm/boot/dts/integrator.dtsi create mode 100644 arch/arm/boot/dts/integratorap.dts create mode 100644 arch/arm/boot/dts/integratorcp.dts (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 91f26148af79..fc81a7d6b0f1 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -1,3 +1,15 @@ +ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) +----------------------------------------------------------------------------- +ARM's oldest Linux-supported platform with connectors for different core +tiles of ARMv4, ARMv5 and ARMv6 type. + +Required properties (in root node): + compatible = "arm,integrator-ap"; /* Application Platform */ + compatible = "arm,integrator-cp"; /* Compact Platform */ + +FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. + + ARM Versatile Application and Platform Baseboards ------------------------------------------------- ARM's development hardware platform with connectors for customizable diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi new file mode 100644 index 000000000000..b464abadd10b --- /dev/null +++ b/arch/arm/boot/dts/integrator.dtsi @@ -0,0 +1,33 @@ +/* + * SoC core Device Tree for the ARM Integrator platforms + */ + +/include/ "skeleton.dtsi" + +/ { + timer@13000000 { + reg = <0x13000000 0x100>; + interrupt-parent = <&pic>; + interrupts = <5>; + }; + + timer@13000100 { + reg = <0x13000100 0x100>; + interrupt-parent = <&pic>; + interrupts = <6>; + }; + + timer@13000200 { + reg = <0x13000200 0x100>; + interrupt-parent = <&pic>; + interrupts = <7>; + }; + + pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts new file mode 100644 index 000000000000..083ff395de0f --- /dev/null +++ b/arch/arm/boot/dts/integratorap.dts @@ -0,0 +1,36 @@ +/* + * Device Tree for the ARM Integrator/AP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/AP"; + compatible = "arm,integrator-ap"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,integrator-timer"; + }; + + timer1: timer@13000100 { + compatible = "arm,integrator-timer"; + }; + + timer2: timer@13000200 { + compatible = "arm,integrator-timer"; + }; + + pic: pic@14000000 { + valid-mask = <0x003fffff>; + }; +}; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts new file mode 100644 index 000000000000..63033144442a --- /dev/null +++ b/arch/arm/boot/dts/integratorcp.dts @@ -0,0 +1,54 @@ +/* + * Device Tree for the ARM Integrator/CP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/CP"; + compatible = "arm,integrator-cp"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer1: timer@13000100 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer2: timer@13000200 { + compatible = "arm,sp804", "arm,primecell"; + }; + + pic: pic@14000000 { + valid-mask = <0x1fc003ff>; + }; + + cic: cic@10000040 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x10000040 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x00000007>; + }; + + sic: sic@ca000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0xca000000 0x100>; + clear-mask = <0x00000fff>; + valid-mask = <0x00000fff>; + }; +}; diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index ff966d83281c..57add86c4a69 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -34,6 +34,8 @@ #include #include #include +#include +#include #include