From a40f73419f02e40555f692785ea1c1813d5b4c12 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 31 May 2011 16:31:22 -0700 Subject: mtd: nand: consolidate redundant flash-based BBT flags This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- arch/arm/mach-davinci/board-da830-evm.c | 2 +- arch/arm/mach-davinci/board-da850-evm.c | 2 +- arch/arm/mach-davinci/board-dm355-evm.c | 2 +- arch/arm/mach-davinci/board-dm355-leopard.c | 2 +- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- arch/arm/mach-davinci/board-dm644x-evm.c | 2 +- arch/arm/mach-davinci/board-mityomapl138.c | 3 ++- arch/arm/mach-davinci/board-neuros-osd2.c | 2 +- arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +- arch/arm/mach-davinci/include/mach/nand.h | 4 +++- arch/arm/mach-orion5x/ts78xx-setup.c | 2 +- arch/cris/arch-v32/drivers/mach-a3/nandflash.c | 2 +- arch/cris/arch-v32/drivers/mach-fs/nandflash.c | 2 +- 13 files changed, 16 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 84fd78684868..a790c1b363ff 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -377,7 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, .bbt_td = &da830_evm_nand_bbt_main_descr, .bbt_md = &da830_evm_nand_bbt_mirror_descr, .timing = &da830_evm_nandflash_timing, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bd5394537c88..de27111d1b27 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -225,7 +225,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = { .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, .timing = &da850_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 241a6bd67408..fd2de2c0338b 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -77,7 +77,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, .ecc_bits = 4, }; diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index bee284ca7fd6..cfbd897e6611 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -74,7 +74,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW_SYNDROME, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, }; static struct resource davinci_nand_resources[] = { diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 9818f214d4f0..e66116ddea4f 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -139,7 +139,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, .ecc_bits = 4, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 95607a191e03..dde204933c9e 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -150,7 +150,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, .timing = &davinci_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index c278226627ad..ef7ba494493d 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -396,7 +396,8 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = { .parts = mityomapl138_nandflash_partition, .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .options = NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16, + .bbt_options = NAND_USE_FLASH_BBT, + .options = NAND_BUSWIDTH_16, .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */ }; diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index d60a80028ba3..1989768973a7 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -87,7 +87,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { .parts = davinci_ntosd2_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, }; static struct resource davinci_ntosd2_nandflash_resource[] = { diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 782892065682..046f8e00938e 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -144,7 +144,7 @@ static struct davinci_nand_pdata nand_config = { .parts = nand_partitions, .nr_parts = ARRAY_SIZE(nand_partitions), .ecc_mode = NAND_ECC_HW, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, .ecc_bits = 1, }; diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index 025151049f05..2c506f905cb8 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -74,8 +74,10 @@ struct davinci_nand_pdata { /* platform_data */ nand_ecc_modes_t ecc_mode; u8 ecc_bits; - /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ + /* e.g. NAND_BUSWIDTH_16 */ unsigned options; + /* e.g. NAND_USE_FLASH_BBT */ + unsigned bbt_options; /* Main and mirror bbt descriptor overrides */ struct nand_bbt_descr *bbt_td; diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 6b7b54116f30..e5ca57ce6e50 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -275,7 +275,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = { .partitions = ts78xx_ts_nand_parts, .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), .chip_delay = 15, - .options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_USE_FLASH_BBT, }, .ctrl = { /* diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index f58f2c1c5295..fdd11c12b759 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_USE_FLASH_BBT; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index d5b0cc9f976b..3368177bdd3b 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_USE_FLASH_BBT; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { -- cgit v1.2.3 From bb9ebd4e714385a2592a482845865ef2d58b2868 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 31 May 2011 16:31:23 -0700 Subject: mtd: nand: rename NAND_USE_FLASH_BBT Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- Documentation/DocBook/mtdnand.tmpl | 2 +- arch/arm/mach-davinci/board-da830-evm.c | 2 +- arch/arm/mach-davinci/board-da850-evm.c | 2 +- arch/arm/mach-davinci/board-dm355-evm.c | 2 +- arch/arm/mach-davinci/board-dm355-leopard.c | 2 +- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- arch/arm/mach-davinci/board-dm644x-evm.c | 2 +- arch/arm/mach-davinci/board-mityomapl138.c | 2 +- arch/arm/mach-davinci/board-neuros-osd2.c | 2 +- arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +- arch/arm/mach-davinci/include/mach/nand.h | 2 +- arch/arm/mach-orion5x/ts78xx-setup.c | 2 +- arch/cris/arch-v32/drivers/mach-a3/nandflash.c | 2 +- arch/cris/arch-v32/drivers/mach-fs/nandflash.c | 2 +- drivers/mtd/nand/atmel_nand.c | 2 +- drivers/mtd/nand/autcpu12.c | 4 ++-- drivers/mtd/nand/bcm_umi_nand.c | 2 +- drivers/mtd/nand/cafe_nand.c | 2 +- drivers/mtd/nand/cs553x_nand.c | 2 +- drivers/mtd/nand/davinci_nand.c | 2 +- drivers/mtd/nand/denali.c | 2 +- drivers/mtd/nand/diskonchip.c | 2 +- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/mpc5121_nfc.c | 2 +- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_bbt.c | 12 ++++++------ drivers/mtd/nand/nandsim.c | 2 +- drivers/mtd/nand/pasemi_nand.c | 2 +- drivers/mtd/nand/s3c2410.c | 2 +- include/linux/mtd/bbm.h | 2 +- 31 files changed, 37 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 05cc83ea8ef7..8c07540c181c 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -572,7 +572,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) The simplest way to activate the FLASH based bad block table support - is to set the option NAND_USE_FLASH_BBT in the bbt_option field of + is to set the option NAND_BBT_USE_FLASH in the bbt_option field of the nand chip structure before calling nand_scan(). For AG-AND chips is this done by default. This activates the default FLASH based bad block table functionality diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index a790c1b363ff..0b36fd54fc47 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -377,7 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .bbt_td = &da830_evm_nand_bbt_main_descr, .bbt_md = &da830_evm_nand_bbt_mirror_descr, .timing = &da830_evm_nandflash_timing, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index de27111d1b27..8193d340de22 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -225,7 +225,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = { .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .timing = &da850_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index fd2de2c0338b..fe617790fe2b 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -77,7 +77,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .ecc_bits = 4, }; diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index cfbd897e6611..249c35512748 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -74,7 +74,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW_SYNDROME, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, }; static struct resource davinci_nand_resources[] = { diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index e66116ddea4f..e555267f2492 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -139,7 +139,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .ecc_bits = 4, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index dde204933c9e..8fd305264e83 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -150,7 +150,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .timing = &davinci_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index ef7ba494493d..dffab31670f7 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -396,7 +396,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = { .parts = mityomapl138_nandflash_partition, .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .options = NAND_BUSWIDTH_16, .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */ }; diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 1989768973a7..70dcf9f30213 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -87,7 +87,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { .parts = davinci_ntosd2_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, }; static struct resource davinci_ntosd2_nandflash_resource[] = { diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 046f8e00938e..75383df868ff 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -144,7 +144,7 @@ static struct davinci_nand_pdata nand_config = { .parts = nand_partitions, .nr_parts = ARRAY_SIZE(nand_partitions), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .ecc_bits = 1, }; diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index 2c506f905cb8..1cf555aef896 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -76,7 +76,7 @@ struct davinci_nand_pdata { /* platform_data */ /* e.g. NAND_BUSWIDTH_16 */ unsigned options; - /* e.g. NAND_USE_FLASH_BBT */ + /* e.g. NAND_BBT_USE_FLASH */ unsigned bbt_options; /* Main and mirror bbt descriptor overrides */ diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index e5ca57ce6e50..8ae53015eeb8 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -275,7 +275,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = { .partitions = ts78xx_ts_nand_parts, .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), .chip_delay = 15, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, }, .ctrl = { /* diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index fdd11c12b759..7fb52128ddc9 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->bbt_options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_BBT_USE_FLASH; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index 3368177bdd3b..e03238454b0e 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->bbt_options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_BBT_USE_FLASH; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 78d551622e11..79a7ef276616 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -583,7 +583,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) if (on_flash_bbt) { printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); - nand_chip->bbt_options |= NAND_USE_FLASH_BBT; + nand_chip->bbt_options |= NAND_BBT_USE_FLASH; } if (!cpu_has_dma()) diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index adf934df8958..2e42ec2e8ff4 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -172,9 +172,9 @@ static int __init autcpu12_init(void) /* Enable the following for a flash based bad block table */ /* - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; */ - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ if (nand_scan(autcpu12_mtd, 1)) { diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 974d9bc8e48e..e3ffc4c908e4 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -474,7 +474,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) #if NAND_ECC_BCH if (board_mtd->writesize > 512) { - if (this->bbt_options & NAND_USE_FLASH_BBT) + if (this->bbt_options & NAND_BBT_USE_FLASH) largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; this->badblock_pattern = &largepage_bbt; } diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 7dd7d844d2cf..d0eed498ed2b 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -686,7 +686,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, cafe->nand.chip_delay = 0; /* Enable the following for a flash based bad block table */ - cafe->nand.bbt_options = NAND_USE_FLASH_BBT; + cafe->nand.bbt_options = NAND_BBT_USE_FLASH; cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; if (skipbbt) { diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 05adedd8c20c..b35496143e74 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -239,7 +239,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) this->ecc.correct = nand_correct_data; /* Enable the following for a flash based bad block table */ - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; this->options = NAND_NO_AUTOINCR; /* Scan to find existence of the device */ diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 69f70195ff35..a4c82b4344ba 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -581,7 +581,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.chip_delay = 0; info->chip.select_chip = nand_davinci_select_chip; - /* options such as NAND_USE_FLASH_BBT */ + /* options such as NAND_BBT_USE_FLASH */ info->chip.bbt_options = pdata->bbt_options; /* options such as 16-bit widths */ info->chip.options = pdata->options; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index dbb6fbae7d25..ee3014505af2 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1577,7 +1577,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.bbt_md = &bbt_mirror_descr; /* skip the scan for now until we have OOB read and write support */ - denali->nand.bbt_options |= NAND_USE_FLASH_BBT; + denali->nand.bbt_options |= NAND_BBT_USE_FLASH; denali->nand.options |= NAND_SKIP_BBTSCAN; denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index f70bc73e7948..b657d7f9b05c 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1652,7 +1652,7 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; - nand->bbt_options = NAND_USE_FLASH_BBT; + nand->bbt_options = NAND_BBT_USE_FLASH; doc->physadr = physadr; doc->virtadr = virtadr; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index bff4791d73c3..d4ea5fe013b7 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -792,7 +792,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) /* set up nand options */ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; chip->controller = &elbc_fcm_ctrl->controller; chip->priv = priv; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 0ac64b54bd67..2f2c35a7771e 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -736,7 +736,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) chip->verify_buf = mpc5121_nfc_verify_buf; chip->select_chip = mpc5121_nfc_select_chip; chip->options = NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; /* Support external chip-select logic on ADS5121 board */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index ed68fde3d1be..ca42c8f335b3 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1179,7 +1179,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; /* update flash based bbt */ - this->bbt_options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_BBT_USE_FLASH; } init_completion(&host->op_completion); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d39dffe71de4..422e7872d6db 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -405,7 +405,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ - if (chip->bbt_options & NAND_USE_FLASH_BBT) + if (chip->bbt_options & NAND_BBT_USE_FLASH) ret = nand_update_bbt(mtd, ofs); else { nand_get_device(chip, mtd, FL_WRITING); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 66f93e2ac16b..dfea9fd1d61c 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -14,7 +14,7 @@ * * When nand_scan_bbt is called, then it tries to find the bad block table * depending on the options in the BBT descriptor(s). If no flash based BBT - * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory + * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory * marked good / bad blocks. This information is used to create a memory BBT. * Once a new bad block is discovered then the "factory" information is updated * on the device. @@ -36,7 +36,7 @@ * The table is marked in the OOB area with an ident pattern and a version * number which indicates which of both tables is more up to date. If the NAND * controller needs the complete OOB area for the ECC information then the - * option NAND_BBT_NO_OOB should be used (along with NAND_USE_FLASH_BBT, of + * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of * course): it moves the ident pattern and the version byte into the data area * and the OOB area will remain untouched. * @@ -1083,14 +1083,14 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) bits = bd->options & NAND_BBT_NRBITS_MSK; BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) && - !(this->bbt_options & NAND_USE_FLASH_BBT)); + !(this->bbt_options & NAND_BBT_USE_FLASH)); BUG_ON(!bits); if (bd->options & NAND_BBT_VERSION) pattern_len++; if (bd->options & NAND_BBT_NO_OOB) { - BUG_ON(!(this->bbt_options & NAND_USE_FLASH_BBT)); + BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH)); BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB)); BUG_ON(bd->offs); if (bd->options & NAND_BBT_VERSION) @@ -1357,12 +1357,12 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; } - this->bbt_options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_BBT_USE_FLASH; return nand_scan_bbt(mtd, &agand_flashbased); } /* Is a flash based bad block table requested ? */ - if (this->bbt_options & NAND_USE_FLASH_BBT) { + if (this->bbt_options & NAND_BBT_USE_FLASH) { /* Use the default pattern descriptors */ if (!this->bbt_td) { if (this->bbt_options & NAND_BBT_NO_OOB) { diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 1856c42c62c4..34c03be77301 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -2275,7 +2275,7 @@ static int __init ns_init_module(void) case 2: chip->bbt_options |= NAND_BBT_NO_OOB; case 1: - chip->bbt_options |= NAND_USE_FLASH_BBT; + chip->bbt_options |= NAND_BBT_USE_FLASH; case 0: break; default: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 1c17f091e16b..a97264ececdb 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -156,7 +156,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) /* Enable the following for a flash based bad block table */ chip->options = NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ if (nand_scan(pasemi_nand_mtd, 1)) { diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 370516c3f7c7..ec280798e221 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -881,7 +881,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * let the kernel fish out the BBT from the NAND, and also skip the * full NAND scan that can take 1/2s or so. Little things... */ if (set->flash_bbt) { - chip->bbt_options |= NAND_USE_FLASH_BBT; + chip->bbt_options |= NAND_BBT_USE_FLASH; chip->options |= NAND_SKIP_BBTSCAN; } } diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 7929514781ea..ff18c0850519 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -104,7 +104,7 @@ struct nand_bbt_descr { * Use a flash based bad block table. By default, OOB identifier is saved in * OOB area. This option is passed to the default bad block table function. */ -#define NAND_USE_FLASH_BBT 0x00040000 +#define NAND_BBT_USE_FLASH 0x00040000 /* Do not store flash based bad block table in OOB area; store it in-band */ #define NAND_BBT_NO_OOB 0x00080000 -- cgit v1.2.3 From 1754aab9bb869c173aa03b57587256827250e488 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Sun, 29 May 2011 17:49:22 +0400 Subject: mtd: ATMEL, AVR32: inline nand partition table access Currently atmel_nand driver used by AT91 and AVR32 calls a special callback which return nand partition table and number of partitions. However in all boards this callback returns just static data. So drop this callback and make atmel_nand use partition table provided statically via platform_data. Nicolas Ferre: I am in favor for a mainline inclusion through linux-mtd tree. Hans-Christian Egtvedt: I'm fine by sending the changes for AVR32 through linux-mtd Signed-off-by: Dmitry Eremin-Solenikov Acked-by: Hans-Christian Egtvedt Acked-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Artem Bityutskiy --- arch/arm/mach-at91/board-afeb-9260v1.c | 9 ++------- arch/arm/mach-at91/board-cam60.c | 9 ++------- arch/arm/mach-at91/board-cap9adk.c | 9 ++------- arch/arm/mach-at91/board-kb9202.c | 9 ++------- arch/arm/mach-at91/board-neocore926.c | 9 ++------- arch/arm/mach-at91/board-qil-a9260.c | 9 ++------- arch/arm/mach-at91/board-rm9200dk.c | 9 ++------- arch/arm/mach-at91/board-sam9-l9260.c | 9 ++------- arch/arm/mach-at91/board-sam9260ek.c | 9 ++------- arch/arm/mach-at91/board-sam9261ek.c | 9 ++------- arch/arm/mach-at91/board-sam9263ek.c | 9 ++------- arch/arm/mach-at91/board-sam9g20ek.c | 9 ++------- arch/arm/mach-at91/board-sam9m10g45ek.c | 9 ++------- arch/arm/mach-at91/board-sam9rlek.c | 9 ++------- arch/arm/mach-at91/board-snapper9260.c | 10 ++-------- arch/arm/mach-at91/board-usb-a9260.c | 9 ++------- arch/arm/mach-at91/board-usb-a9263.c | 9 ++------- arch/arm/mach-at91/board-yl-9200.c | 9 ++------- arch/arm/mach-at91/include/mach/board.h | 3 ++- arch/avr32/boards/atngw100/setup.c | 8 ++------ arch/avr32/boards/atstk1000/atstk1002.c | 9 ++------- arch/avr32/mach-at32ap/include/mach/board.h | 3 ++- drivers/mtd/nand/atmel_nand.c | 7 ++++--- 23 files changed, 48 insertions(+), 145 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b0c796d42e49..a053e915c279 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -130,19 +130,14 @@ static struct mtd_partition __initdata afeb9260_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(afeb9260_nand_partition); - return afeb9260_nand_partition; -} - static struct atmel_nand_data __initdata afeb9260_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, .bus_width_16 = 0, + .parts = afeb9260_nand_partition, + .num_parts = ARRAY_SIZE(afeb9260_nand_partition), }; diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index d1abd5898e85..46f8bab9c943 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -132,19 +132,14 @@ static struct mtd_partition __initdata cam60_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(cam60_nand_partition); - return cam60_nand_partition; -} - static struct atmel_nand_data __initdata cam60_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not there .rdy_pin = AT91_PIN_PA9, .enable_pin = AT91_PIN_PA7, - .partition_info = nand_partitions, + .parts = cam60_nand_partition, + .num_parts = ARRAY_SIZE(cam60_nand_partition), }; static struct sam9_smc_config __initdata cam60_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 679b0b743e92..858927e2aff5 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -169,19 +169,14 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions); - return cap9adk_nand_partitions; -} - static struct atmel_nand_data __initdata cap9adk_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, - .partition_info = nand_partitions, + .parts = cap9adk_nand_partitions, + .num_parts = ARRAY_SIZE(cap9adk_nand_partitions), }; static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 9dc8d496ead1..94372441c1aa 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -97,19 +97,14 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(kb9202_nand_partition); - return kb9202_nand_partition; -} - static struct atmel_nand_data __initdata kb9202_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not there .rdy_pin = AT91_PIN_PC29, .enable_pin = AT91_PIN_PC28, - .partition_info = nand_partitions, + .parts = kb9202_nand_partition, + .num_parts = ARRAY_SIZE(kb9202_nand_partition), }; static void __init kb9202_board_init(void) diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9bc6ab32e0ac..60f0cee074dc 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -182,19 +182,14 @@ static struct mtd_partition __initdata neocore926_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(neocore926_nand_partition); - return neocore926_nand_partition; -} - static struct atmel_nand_data __initdata neocore926_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PB19, .rdy_pin_active_low = 1, .enable_pin = AT91_PIN_PD15, - .partition_info = nand_partitions, + .parts = neocore926_nand_partition, + .num_parts = ARRAY_SIZE(neocore926_nand_partition), }; static struct sam9_smc_config __initdata neocore926_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 81f911033681..78d71e45d744 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -130,19 +130,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 6f08faadb474..b5f2faf479f6 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -138,19 +138,14 @@ static struct mtd_partition __initdata dk_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(dk_nand_partition); - return dk_nand_partition; -} - static struct atmel_nand_data __initdata dk_nand_data = { .ale = 22, .cle = 21, .det_pin = AT91_PIN_PB1, .rdy_pin = AT91_PIN_PC2, // .enable_pin = ... not there - .partition_info = nand_partitions, + .parts = dk_nand_partition, + .num_parts = ARRAY_SIZE(dk_nand_partition), }; #define DK_FLASH_BASE AT91_CHIPSELECT_0 diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 4d3a02f1289e..4128f6d8e902 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -131,19 +131,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 8a50c3e67186..2cf7ce25a33e 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -173,19 +173,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 5096a0ec50c1..b7f35d0e9e54 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -179,19 +179,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ea8f185d3b9d..5d2bd12b41a8 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -180,19 +180,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 817f59d7251b..003122772e63 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -157,19 +157,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - /* det_pin is not connected */ static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ad234ccbf57e..00d041ca8dbe 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -137,19 +137,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - /* det_pin is not connected */ static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 4f14b54b93a8..6178b4e7f1aa 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -88,19 +88,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PD17, .enable_pin = AT91_PIN_PB6, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index c73d25e5faea..0df01c6e2d0c 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -97,18 +97,12 @@ static struct mtd_partition __initdata snapper9260_nand_partitions[] = { }, }; -static struct mtd_partition * __init -snapper9260_nand_partition_info(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions); - return snapper9260_nand_partitions; -} - static struct atmel_nand_data __initdata snapper9260_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC13, - .partition_info = snapper9260_nand_partition_info, + .parts = snapper9260_nand_partitions, + .num_parts = ARRAY_SIZE(snapper9260_nand_partitions), .bus_width_16 = 0, }; diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 8c4c1a02c4be..73e572302a4a 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -104,19 +104,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { } }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 25e793782a4e..909fd9743950 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -117,19 +117,14 @@ static struct mtd_partition __initdata ek_nand_partition[] = { } }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(ek_nand_partition); - return ek_nand_partition; -} - static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, - .partition_info = nand_partitions, + .parts = ek_nand_partition, + .num_parts = ARRAY_SIZE(ek_nand_partition), }; static struct sam9_smc_config __initdata ek_nand_smc_config = { diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 95edcbd2aec6..7511fb83865a 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -172,19 +172,14 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = { } }; -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(yl9200_nand_partition); - return yl9200_nand_partition; -} - static struct atmel_nand_data __initdata yl9200_nand_data = { .ale = 6, .cle = 7, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ - .partition_info = nand_partitions, + .parts = yl9200_nand_partition, + .num_parts = ARRAY_SIZE(yl9200_nand_partition), }; /* diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index ed544a0d5a1d..664353198bc0 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -112,7 +112,8 @@ struct atmel_nand_data { u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ - struct mtd_partition* (*partition_info)(int, int*); + struct mtd_partition *parts; + unsigned int num_parts; }; extern void __init at91_add_device_nand(struct atmel_nand_data *data); diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index fafed4c38fd2..1f17bde52cd4 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -90,11 +90,6 @@ static struct mtd_partition nand_partitions[] = { }, }; -static struct mtd_partition *nand_part_info(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(nand_partitions); - return nand_partitions; -} static struct atmel_nand_data atngw100mkii_nand_data __initdata = { .cle = 21, @@ -102,7 +97,8 @@ static struct atmel_nand_data atngw100mkii_nand_data __initdata = { .rdy_pin = GPIO_PIN_PB(28), .enable_pin = GPIO_PIN_PE(23), .bus_width_16 = true, - .partition_info = nand_part_info, + .parts = nand_partitions, + .num_parts = ARRAY_SIZE(nand_partitions), }; #endif diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 6ce30fb2ec94..4643ff5107c9 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -90,18 +90,13 @@ static struct mtd_partition nand_partitions[] = { }, }; -static struct mtd_partition *nand_part_info(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(nand_partitions); - return nand_partitions; -} - static struct atmel_nand_data atstk1006_nand_data __initdata = { .cle = 21, .ale = 22, .rdy_pin = GPIO_PIN_PB(30), .enable_pin = GPIO_PIN_PB(29), - .partition_info = nand_part_info, + .parts = nand_partitions, + .num_parts = ARRAY_SIZE(num_partitions), }; #endif diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 679458d9a622..5d7ffca7d69f 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -128,7 +128,8 @@ struct atmel_nand_data { u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 bus_width_16; /* buswidth is 16 bit */ - struct mtd_partition *(*partition_info)(int size, int *num_partitions); + struct mtd_partition *parts; + unsigned int num_parts; }; struct platform_device * at32_add_device_nand(unsigned int id, struct atmel_nand_data *data); diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 79a7ef276616..01fb5f0adcf0 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -660,9 +660,10 @@ static int __init atmel_nand_probe(struct platform_device *pdev) num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0); #endif - if (num_partitions <= 0 && host->board->partition_info) - partitions = host->board->partition_info(mtd->size, - &num_partitions); + if (num_partitions <= 0 && host->board->parts) { + partitions = host->board->parts; + num_partitions = host->board->num_parts; + } if ((!partitions) || (num_partitions == 0)) { printk(KERN_ERR "atmel_nand: No partitions defined, or unsupported device.\n"); -- cgit v1.2.3 From 78dd9e3500873edd6005a41f8ba178eacbff64c5 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 6 Jun 2011 18:04:15 +0400 Subject: ts72xx: use MTDPART_OFS_RETAIN for mtd partitioning Instead of specifying a callback for dynamic partitioning, use MTDPART_OFS_RETAIN for reserving a place near the end of flash for RedBoot. Signed-off-by: Dmitry Eremin-Solenikov Cc: Hartley Sweeten Cc: Ryan Mallon Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Artem Bityutskiy --- arch/arm/mach-ep93xx/ts72xx.c | 23 +++++------------------ 1 file changed, 5 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index c2d2cf40ead9..dea42e262151 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -116,8 +116,9 @@ static struct mtd_partition ts72xx_nand_parts[] = { .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "Linux", - .offset = MTDPART_OFS_APPEND, - .size = 0, /* filled in later */ + .offset = MTDPART_OFS_RETAIN, + .size = TS72XX_REDBOOT_PART_SIZE, + /* leave so much for last partition */ }, { .name = "RedBoot", .offset = MTDPART_OFS_APPEND, @@ -126,28 +127,14 @@ static struct mtd_partition ts72xx_nand_parts[] = { }, }; -static void ts72xx_nand_set_parts(uint64_t size, - struct platform_nand_chip *chip) -{ - /* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */ - if (size == SZ_32M || size == SZ_128M) { - /* Set the "Linux" partition size */ - ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE; - - chip->partitions = ts72xx_nand_parts; - chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts); - } else { - pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20); - } -} - static struct platform_nand_data ts72xx_nand_data = { .chip = { .nr_chips = 1, .chip_offset = 0, .chip_delay = 15, .part_probe_types = ts72xx_nand_part_probes, - .set_parts = ts72xx_nand_set_parts, + .partitions = ts72xx_nand_parts, + .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts), }, .ctrl = { .cmd_ctrl = ts72xx_nand_hwcontrol, -- cgit v1.2.3 From f3c8cfc237927cc095e8bcb1e3794cfa76390bab Mon Sep 17 00:00:00 2001 From: Lei Wen Date: Thu, 14 Jul 2011 20:44:33 -0700 Subject: mtd: pxa3xx_nand: enable multiple chip select support Current pxa3xx_nand controller has two chip select which both be workable. This patch enable this feature. Update platform driver to support this feature. Another notice should be taken that: When you want to use this feature, you should not enable the keep configuration feature, for two chip select could be attached with different nand chip. The different page size and timing requirement make the keep configuration impossible. Signed-off-by: Lei Wen --- arch/arm/mach-mmp/aspenite.c | 5 +- arch/arm/mach-pxa/cm-x300.c | 5 +- arch/arm/mach-pxa/colibri-pxa3xx.c | 5 +- arch/arm/mach-pxa/littleton.c | 5 +- arch/arm/mach-pxa/mxm8x10.c | 9 +- arch/arm/mach-pxa/raumfeld.c | 5 +- arch/arm/mach-pxa/zylonite.c | 5 +- arch/arm/plat-pxa/include/plat/pxa3xx_nand.h | 20 +++- drivers/mtd/nand/pxa3xx_nand.c | 173 +++++++++++++++++++-------- 9 files changed, 164 insertions(+), 68 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 06b5fa853c93..c4996f3dba3b 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -167,8 +167,9 @@ static struct mtd_partition aspenite_nand_partitions[] = { static struct pxa3xx_nand_platform_data aspenite_nand_info = { .enable_arbiter = 1, - .parts = aspenite_nand_partitions, - .nr_parts = ARRAY_SIZE(aspenite_nand_partitions), + .num_cs = 1, + .parts[0] = aspenite_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(aspenite_nand_partitions), }; static struct i2c_board_info aspenite_i2c_info[] __initdata = { diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b6a51340270b..eac3846ce42c 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -424,8 +424,9 @@ static struct mtd_partition cm_x300_nand_partitions[] = { static struct pxa3xx_nand_platform_data cm_x300_nand_info = { .enable_arbiter = 1, .keep_config = 1, - .parts = cm_x300_nand_partitions, - .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions), + .num_cs = 1, + .parts[0] = cm_x300_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(cm_x300_nand_partitions), }; static void __init cm_x300_init_nand(void) diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 3f9be419959d..2b8ca0de8a3d 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -139,8 +139,9 @@ static struct mtd_partition colibri_nand_partitions[] = { static struct pxa3xx_nand_platform_data colibri_nand_info = { .enable_arbiter = 1, .keep_config = 1, - .parts = colibri_nand_partitions, - .nr_parts = ARRAY_SIZE(colibri_nand_partitions), + .num_cs = 1, + .parts[0] = colibri_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(colibri_nand_partitions), }; void __init colibri_pxa3xx_init_nand(void) diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 8f97e15e86e5..cd9fda3c9e65 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -325,8 +325,9 @@ static struct mtd_partition littleton_nand_partitions[] = { static struct pxa3xx_nand_platform_data littleton_nand_info = { .enable_arbiter = 1, - .parts = littleton_nand_partitions, - .nr_parts = ARRAY_SIZE(littleton_nand_partitions), + .num_cs = 1, + .parts[0] = littleton_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(littleton_nand_partitions), }; static void __init littleton_init_nand(void) diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index b5a8fd3fce04..90928d6e1a5b 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -389,10 +389,11 @@ static struct mtd_partition mxm_8x10_nand_partitions[] = { }; static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = { - .enable_arbiter = 1, - .keep_config = 1, - .parts = mxm_8x10_nand_partitions, - .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions) + .enable_arbiter = 1, + .keep_config = 1, + .num_cs = 1, + .parts[0] = mxm_8x10_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(mxm_8x10_nand_partitions) }; static void __init mxm_8x10_nand_init(void) diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index bbcd90562ebe..6a2f353de39a 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -346,8 +346,9 @@ static struct mtd_partition raumfeld_nand_partitions[] = { static struct pxa3xx_nand_platform_data raumfeld_nand_info = { .enable_arbiter = 1, .keep_config = 1, - .parts = raumfeld_nand_partitions, - .nr_parts = ARRAY_SIZE(raumfeld_nand_partitions), + .num_cs = 1, + .parts[0] = raumfeld_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(raumfeld_nand_partitions), }; /** diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 15ec66b3471a..90fbf879c019 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -366,8 +366,9 @@ static struct mtd_partition zylonite_nand_partitions[] = { static struct pxa3xx_nand_platform_data zylonite_nand_info = { .enable_arbiter = 1, - .parts = zylonite_nand_partitions, - .nr_parts = ARRAY_SIZE(zylonite_nand_partitions), + .num_cs = 1, + .parts[0] = zylonite_nand_partitions, + .nr_parts[0] = ARRAY_SIZE(zylonite_nand_partitions), }; static void __init zylonite_init_nand(void) diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h index 442301fe48b4..c42f39f20195 100644 --- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h +++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h @@ -41,6 +41,19 @@ struct pxa3xx_nand_flash { struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ }; +/* + * Current pxa3xx_nand controller has two chip select which + * both be workable. + * + * Notice should be taken that: + * When you want to use this feature, you should not enable the + * keep configuration feature, for two chip select could be + * attached with different nand chip. The different page size + * and timing requirement make the keep configuration impossible. + */ + +/* The max num of chip select current support */ +#define NUM_CHIP_SELECT (2) struct pxa3xx_nand_platform_data { /* the data flash bus is shared between the Static Memory @@ -52,8 +65,11 @@ struct pxa3xx_nand_platform_data { /* allow platform code to keep OBM/bootloader defined NFC config */ int keep_config; - const struct mtd_partition *parts; - unsigned int nr_parts; + /* indicate how many chip selects will be used */ + int num_cs; + + const struct mtd_partition *parts[NUM_CHIP_SELECT]; + unsigned int nr_parts[NUM_CHIP_SELECT]; const struct pxa3xx_nand_flash * flash; size_t num_flash; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 97b689499119..9eb7f879969e 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -130,6 +130,7 @@ struct pxa3xx_nand_host { /* page size of attached chip */ unsigned int page_size; int use_ecc; + int cs; /* calculated from pxa3xx_nand_flash data */ unsigned int col_addr_cycles; @@ -165,9 +166,10 @@ struct pxa3xx_nand_info { struct pxa_dma_desc *data_desc; dma_addr_t data_desc_addr; - struct pxa3xx_nand_host *host; + struct pxa3xx_nand_host *host[NUM_CHIP_SELECT]; unsigned int state; + int cs; int use_ecc; /* use HW ECC ? */ int use_dma; /* use DMA ? */ int is_ready; @@ -226,7 +228,7 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = { /* Define a default flash type setting serve as flash detecting only */ #define DEFAULT_FLASH_TYPE (&builtin_flash_types[0]) -const char *mtd_names[] = {"pxa3xx_nand-0", NULL}; +const char *mtd_names[] = {"pxa3xx_nand-0", "pxa3xx_nand-1", NULL}; #define NDTR0_tCH(c) (min((c), 7) << 19) #define NDTR0_tCS(c) (min((c), 7) << 16) @@ -268,7 +270,7 @@ static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host, static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) { - struct pxa3xx_nand_host *host = info->host; + struct pxa3xx_nand_host *host = info->host[info->cs]; int oob_enable = host->reg_ndcr & NDCR_SPARE_EN; info->data_size = host->page_size; @@ -295,7 +297,7 @@ static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) */ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info) { - struct pxa3xx_nand_host *host = info->host; + struct pxa3xx_nand_host *host = info->host[info->cs]; uint32_t ndcr; ndcr = host->reg_ndcr; @@ -420,6 +422,15 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) { struct pxa3xx_nand_info *info = devid; unsigned int status, is_completed = 0; + unsigned int ready, cmd_done; + + if (info->cs == 0) { + ready = NDSR_FLASH_RDY; + cmd_done = NDSR_CS0_CMDD; + } else { + ready = NDSR_RDY; + cmd_done = NDSR_CS1_CMDD; + } status = nand_readl(info, NDSR); @@ -441,11 +452,11 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) handle_data_pio(info); } } - if (status & NDSR_CS0_CMDD) { + if (status & cmd_done) { info->state = STATE_CMD_DONE; is_completed = 1; } - if (status & NDSR_FLASH_RDY) { + if (status & ready) { info->is_ready = 1; info->state = STATE_READY; } @@ -480,9 +491,11 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, { uint16_t cmd; int addr_cycle, exec_cmd; - struct pxa3xx_nand_host *host = info->host; - struct mtd_info *mtd = host->mtd; + struct pxa3xx_nand_host *host; + struct mtd_info *mtd; + host = info->host[info->cs]; + mtd = host->mtd; addr_cycle = 0; exec_cmd = 1; @@ -492,8 +505,11 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, info->oob_size = 0; info->use_ecc = 0; info->is_ready = 0; - info->ndcb0 = 0; info->retcode = ERR_NONE; + if (info->cs != 0) + info->ndcb0 = NDCB0_CSEL; + else + info->ndcb0 = 0; switch (command) { case NAND_CMD_READ0: @@ -637,6 +653,17 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, if (host->reg_ndcr & NDCR_DWIDTH_M) column /= 2; + /* + * There may be different NAND chip hooked to + * different chip select, so check whether + * chip select has been changed, if yes, reset the timing + */ + if (info->cs != host->cs) { + info->cs = host->cs; + nand_writel(info, NDTR0CS0, host->ndtr0cs0); + nand_writel(info, NDTR1CS0, host->ndtr1cs0); + } + info->state = STATE_PREPARED; exec_cmd = prepare_command_pool(info, command, column, page_addr); if (exec_cmd) { @@ -778,7 +805,7 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, { struct platform_device *pdev = info->pdev; struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data; - struct pxa3xx_nand_host *host = info->host; + struct pxa3xx_nand_host *host = info->host[info->cs]; uint32_t ndcr = 0x0; /* enable all interrupts */ if (f->page_size != 2048 && f->page_size != 512) { @@ -822,7 +849,11 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) { - struct pxa3xx_nand_host *host = info->host; + /* + * We set 0 by hard coding here, for we don't support keep_config + * when there is more than one chip attached to the controller + */ + struct pxa3xx_nand_host *host = info->host[0]; uint32_t ndcr = nand_readl(info, NDCR); if (ndcr & NDCR_PAGE_SZ) { @@ -884,9 +915,9 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info) static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) { - struct mtd_info *mtd = info->host->mtd; + struct mtd_info *mtd; int ret; - + mtd = info->host[info->cs]->mtd; /* use the common timing to make a try */ ret = pxa3xx_nand_config_flash(info, &builtin_flash_types[0]); if (ret) @@ -917,7 +948,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) ret = pxa3xx_nand_sensing(info); if (ret) { - dev_info(&info->pdev->dev, "There is no nand chip on cs 0!\n"); + dev_info(&info->pdev->dev, "There is no chip on cs %d!\n", + info->cs); return ret; } @@ -996,41 +1028,47 @@ KEEP_CONFIG: static int alloc_nand_resource(struct platform_device *pdev) { + struct pxa3xx_nand_platform_data *pdata; struct pxa3xx_nand_info *info; struct pxa3xx_nand_host *host; struct nand_chip *chip; struct mtd_info *mtd; struct resource *r; - int ret, irq; + int ret, irq, cs; - info = kzalloc(sizeof(*info) + sizeof(*mtd) + sizeof(*host), - GFP_KERNEL); + pdata = pdev->dev.platform_data; + info = kzalloc(sizeof(*info) + (sizeof(*mtd) + + sizeof(*host)) * pdata->num_cs, GFP_KERNEL); if (!info) { dev_err(&pdev->dev, "failed to allocate memory\n"); return -ENOMEM; } - mtd = (struct mtd_info *)(&info[1]); - chip = (struct nand_chip *)(&mtd[1]); - host = (struct pxa3xx_nand_host *)chip; info->pdev = pdev; - info->host = host; - host->mtd = mtd; - host->info_data = info; - mtd->priv = host; - mtd->owner = THIS_MODULE; - - chip->ecc.read_page = pxa3xx_nand_read_page_hwecc; - chip->ecc.write_page = pxa3xx_nand_write_page_hwecc; - chip->controller = &info->controller; - chip->waitfunc = pxa3xx_nand_waitfunc; - chip->select_chip = pxa3xx_nand_select_chip; - chip->cmdfunc = pxa3xx_nand_cmdfunc; - chip->read_word = pxa3xx_nand_read_word; - chip->read_byte = pxa3xx_nand_read_byte; - chip->read_buf = pxa3xx_nand_read_buf; - chip->write_buf = pxa3xx_nand_write_buf; - chip->verify_buf = pxa3xx_nand_verify_buf; + for (cs = 0; cs < pdata->num_cs; cs++) { + mtd = (struct mtd_info *)((unsigned int)&info[1] + + (sizeof(*mtd) + sizeof(*host)) * cs); + chip = (struct nand_chip *)(&mtd[1]); + host = (struct pxa3xx_nand_host *)chip; + info->host[cs] = host; + host->mtd = mtd; + host->cs = cs; + host->info_data = info; + mtd->priv = host; + mtd->owner = THIS_MODULE; + + chip->ecc.read_page = pxa3xx_nand_read_page_hwecc; + chip->ecc.write_page = pxa3xx_nand_write_page_hwecc; + chip->controller = &info->controller; + chip->waitfunc = pxa3xx_nand_waitfunc; + chip->select_chip = pxa3xx_nand_select_chip; + chip->cmdfunc = pxa3xx_nand_cmdfunc; + chip->read_word = pxa3xx_nand_read_word; + chip->read_byte = pxa3xx_nand_read_byte; + chip->read_buf = pxa3xx_nand_read_buf; + chip->write_buf = pxa3xx_nand_write_buf; + chip->verify_buf = pxa3xx_nand_verify_buf; + } spin_lock_init(&chip->controller->lock); init_waitqueue_head(&chip->controller->wq); @@ -1128,12 +1166,14 @@ fail_free_mtd: static int pxa3xx_nand_remove(struct platform_device *pdev) { struct pxa3xx_nand_info *info = platform_get_drvdata(pdev); + struct pxa3xx_nand_platform_data *pdata; struct resource *r; - int irq; + int irq, cs; if (!info) return 0; + pdata = pdev->dev.platform_data; platform_set_drvdata(pdev, NULL); irq = platform_get_irq(pdev, 0); @@ -1153,7 +1193,8 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) clk_disable(info->clk); clk_put(info->clk); - nand_release(info->host->mtd); + for (cs = 0; cs < pdata->num_cs; cs++) + nand_release(info->host[cs]->mtd); kfree(info); return 0; } @@ -1162,7 +1203,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) { struct pxa3xx_nand_platform_data *pdata; struct pxa3xx_nand_info *info; - int ret; + int ret, cs, probe_success; pdata = pdev->dev.platform_data; if (!pdata) { @@ -1177,41 +1218,69 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) } info = platform_get_drvdata(pdev); - if (pxa3xx_nand_scan(info->host->mtd)) { - dev_err(&pdev->dev, "failed to scan nand\n"); + probe_success = 0; + for (cs = 0; cs < pdata->num_cs; cs++) { + info->cs = cs; + ret = pxa3xx_nand_scan(info->host[cs]->mtd); + if (ret) { + dev_warn(&pdev->dev, "failed to scan nand at cs %d\n", + cs); + continue; + } + + ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0, + pdata->parts[cs], pdata->nr_parts[cs]); + if (!ret) + probe_success = 1; + } + + if (!probe_success) { pxa3xx_nand_remove(pdev); return -ENODEV; } - return mtd_device_parse_register(info->host->mtd, NULL, 0, - pdata->parts, pdata->nr_parts); + return 0; } #ifdef CONFIG_PM static int pxa3xx_nand_suspend(struct platform_device *pdev, pm_message_t state) { struct pxa3xx_nand_info *info = platform_get_drvdata(pdev); - struct mtd_info *mtd = info->mtd; + struct pxa3xx_nand_platform_data *pdata; + struct mtd_info *mtd; + int cs; + pdata = pdev->dev.platform_data; if (info->state) { dev_err(&pdev->dev, "driver busy, state = %d\n", info->state); return -EAGAIN; } - mtd->suspend(mtd); + for (cs = 0; cs < pdata->num_cs; cs++) { + mtd = info->host[cs]->mtd; + mtd->suspend(mtd); + } + return 0; } static int pxa3xx_nand_resume(struct platform_device *pdev) { struct pxa3xx_nand_info *info = platform_get_drvdata(pdev); - struct mtd_info *mtd = info->mtd; + struct pxa3xx_nand_platform_data *pdata; + struct mtd_info *mtd; + int cs; + pdata = pdev->dev.platform_data; /* We don't want to handle interrupt without calling mtd routine */ disable_int(info, NDCR_INT_MASK); - nand_writel(info, NDTR0CS0, info->host->ndtr0cs0); - nand_writel(info, NDTR1CS0, info->host->ndtr1cs0); + /* + * Directly set the chip select to a invalid value, + * then the driver would reset the timing according + * to current chip select at the beginning of cmdfunc + */ + info->cs = 0xff; /* * As the spec says, the NDSR would be updated to 0x1800 when @@ -1220,7 +1289,11 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) * all status before resume */ nand_writel(info, NDSR, NDSR_MASK); - mtd->resume(mtd); + for (cs = 0; cs < pdata->num_cs; cs++) { + mtd = info->host[cs]->mtd; + mtd->resume(mtd); + } + return 0; } #else -- cgit v1.2.3 From 2cafbb37a135945ecc07d17f3484ed0dea1aa8b1 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 2 May 2011 16:30:52 -0600 Subject: powerpc/5200: add support for charon board Signed-off-by: Heiko Schocher Acked-by: Benjamin Herrenschmidt Acked-by: Wolfram Sang [squashed with patch to add sm501 node] Signed-off-by: Grant Likely Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/charon.dts | 236 +++++++++++++++++++++++++++ arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 2 files changed, 237 insertions(+) create mode 100644 arch/powerpc/boot/dts/charon.dts (limited to 'arch') diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts new file mode 100644 index 000000000000..0e00e508eaa6 --- /dev/null +++ b/arch/powerpc/boot/dts/charon.dts @@ -0,0 +1,236 @@ +/* + * charon board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz + * + * Copyright (C) 2010 DENX Software Engineering GmbH + * Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "anon,charon"; + compatible = "anon,charon"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + fixed-link = <1 1 100 0 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + dtt@28 { + compatible = "national,lm80"; + reg = <0x28>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xe0000000 0x04000000 // CS1 range, SM501 + 3 0 0xe8000000 0x00080000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + mode = "640x480-32@60"; + interrupts = <1 1 3>; + little-endian; + }; + + mram0@3,0 { + compatible = "mtd-ram"; + reg = <3 0x00000 0x80000>; + bank-width = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index e36d6e232ae6..846b789fb195 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static const char *board[] __initdata = { + "anon,charon", "intercontrol,digsy-mtc", "manroland,mucmc52", "manroland,uc101", -- cgit v1.2.3 From 6ecc07b966977bb0855db1fa52d233c39fb3cafb Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 22 Mar 2011 09:27:32 +0100 Subject: powerpc, tqm5200: update tqm5200_defconfig to fit for charon board. added: CONFIG_MTD_OF_PARTS CONFIG_MTD_PLATRAM CONFIG_FIXED_PHY CONFIG_SENSORS_LM80 CONFIG_MFD_SM501 CONFIG_FB CONFIG_FB_FOREIGN_ENDIAN CONFIG_FB_SM501 CONFIG_FRAMEBUFFER_CONSOLE CONFIG_RTC_DRV_DS1374 Signed-off-by: Heiko Schocher Signed-off-by: Grant Likely Signed-off-by: Anatolij Gustschin --- arch/powerpc/configs/52xx/tqm5200_defconfig | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 959cd2cfc275..716a37be16e3 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,9 +1,10 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y +CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set # CONFIG_EPOLL is not set @@ -17,7 +18,6 @@ CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_BESTCOMM=y -CONFIG_SPARSE_IRQ=y CONFIG_PM=y # CONFIG_PCI is not set CONFIG_NET=y @@ -38,17 +38,18 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_MISC_DEVICES is not set CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_ATA=y @@ -56,13 +57,11 @@ CONFIG_PATA_MPC52xx=y CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_LXT_PHY=y +CONFIG_FIXED_PHY=y CONFIG_NET_ETHERNET=y CONFIG_FEC_MPC52xx=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 @@ -70,7 +69,13 @@ CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_SENSORS_LM80=y CONFIG_WATCHDOG=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set @@ -80,10 +85,10 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_STORAGE=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y @@ -102,7 +107,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -- cgit v1.2.3 From a1900f2efe2d75e0fe5b871421a2f2de2fa68b4e Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Fri, 7 Oct 2011 00:52:58 -0600 Subject: ARM: OMAP4: clock: round_rate and recalc functions for DPLL_ABE OMAP4 DPLL_ABE can enable a 4X multipler on top of the normal MN multipler and divider. This is achieved by setting CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit in CKGEN module of CM1. From the OMAP4 TRM: Fdpll = Fref x 2 x (4 x M/(N+1)) in case REGM4XEN bit field is set (only applicable to DPLL_ABE). Add new round_rate() and recalc() functions for OMAP4, that check the setting of REGM4XEN bit and handle this appropriately. The new functions are a simple wrapper on top of the existing omap2_dpll_round_rate() and omap2_dpll_get_rate() functions to handle the REGM4XEN bit. The REGM4XEN bit is only implemented for the ABE DPLL on OMAP4 and so only dpll_abe_ck uses omap4_dpll_regm4xen_round_rate() and omap4_dpll_regm4xen_recalc() functions. Signed-off-by: Mike Turquette Tested-by: Jon Hunter Signed-off-by: Jon Hunter [paul@pwsan.com: fixed attempt to return a negative from a fn returning unsigned; pass along errors from omap2_dpll_round_rate(); added documentation; added Jon's S-o-b] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.h | 2 ++ arch/arm/mach-omap2/clock44xx.h | 7 ++++ arch/arm/mach-omap2/clock44xx_data.c | 4 +-- arch/arm/mach-omap2/dpll44xx.c | 69 ++++++++++++++++++++++++++++++++++++ 4 files changed, 80 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 48ac568881bd..2311bc217226 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -66,6 +66,8 @@ void omap3_noncore_dpll_disable(struct clk *clk); int omap4_dpllmx_gatectrl_read(struct clk *clk); void omap4_dpllmx_allow_gatectrl(struct clk *clk); void omap4_dpllmx_deny_gatectrl(struct clk *clk); +long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate); +unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk); #ifdef CONFIG_OMAP_RESET_CLOCKS void omap2_clk_disable_unused(struct clk *clk); diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h index 7ceb870e7ab8..287a46f78d97 100644 --- a/arch/arm/mach-omap2/clock44xx.h +++ b/arch/arm/mach-omap2/clock44xx.h @@ -8,6 +8,13 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H #define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H +/* + * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is + * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM + * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters") + */ +#define OMAP4430_REGM4XEN_MULT 4 + int omap4xxx_clk_init(void); #endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index c0b6fbda3408..c98c0a22c188 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -270,8 +270,8 @@ static struct clk dpll_abe_ck = { .dpll_data = &dpll_abe_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_omap3_noncore_dpll_ops, - .recalc = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, + .recalc = &omap4_dpll_regm4xen_recalc, + .round_rate = &omap4_dpll_regm4xen_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, }; diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 4e4da6160d05..9c6a296b3dc3 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -19,6 +19,7 @@ #include #include "clock.h" +#include "clock44xx.h" #include "cm-regbits-44xx.h" /* Supported only on OMAP4 */ @@ -82,3 +83,71 @@ const struct clkops clkops_omap4_dpllmx_ops = { .deny_idle = omap4_dpllmx_deny_gatectrl, }; +/** + * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit + * @clk: struct clk * of the DPLL to compute the rate for + * + * Compute the output rate for the OMAP4 DPLL represented by @clk. + * Takes the REGM4XEN bit into consideration, which is needed for the + * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers) + * upon success, or 0 upon error. + */ +unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk) +{ + u32 v; + unsigned long rate; + struct dpll_data *dd; + + if (!clk || !clk->dpll_data) + return 0; + + dd = clk->dpll_data; + + rate = omap2_get_dpll_rate(clk); + + /* regm4xen adds a multiplier of 4 to DPLL calculations */ + v = __raw_readl(dd->control_reg); + if (v & OMAP4430_DPLL_REGM4XEN_MASK) + rate *= OMAP4430_REGM4XEN_MULT; + + return rate; +} + +/** + * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit + * @clk: struct clk * of the DPLL to round a rate for + * @target_rate: the desired rate of the DPLL + * + * Compute the rate that would be programmed into the DPLL hardware + * for @clk if set_rate() were to be provided with the rate + * @target_rate. Takes the REGM4XEN bit into consideration, which is + * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before + * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or + * ~0 if an error occurred in omap2_dpll_round_rate(). + */ +long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate) +{ + u32 v; + struct dpll_data *dd; + long r; + + if (!clk || !clk->dpll_data) + return -EINVAL; + + dd = clk->dpll_data; + + /* regm4xen adds a multiplier of 4 to DPLL calculations */ + v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK; + + if (v) + target_rate = target_rate / OMAP4430_REGM4XEN_MULT; + + r = omap2_dpll_round_rate(clk, target_rate); + if (r == ~0) + return r; + + if (v) + clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; + + return clk->dpll_data->last_rounded_rate; +} -- cgit v1.2.3 From addf888c6945c6e3cff135e7e3bb72cc708d1ca4 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Fri, 7 Oct 2011 00:52:59 -0600 Subject: ARM: OMAP3+: dpll: use DPLL's round_rate when setting rate omap3_noncore_dpll_set_rate uses omap2_dpll_round_rate explicitly. Instead use the struct clk pointer's round_rate function to allow for DPLL's with special needs. An example of a clock that requires this is DPLL_ABE on OMAP4 which can have a 4x multiplier on top of the usual MN dividers depending on register settings. This requires a special round_rate function that might yield a rate different from the initial target. Signed-off-by: Mike Turquette Signed-off-by: Jon Hunter [paul@pwsan.com: split rate assignment portion into a separate patch] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/dpll3xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index f77022be783d..6b0fa3786022 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -455,7 +455,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) new_parent = dd->clk_bypass; } else { if (dd->last_rounded_rate != rate) - omap2_dpll_round_rate(clk, rate); + clk->round_rate(clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; -- cgit v1.2.3 From 273a1ce9cf27ac3900325b59aa78cc07bb574e9e Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Fri, 7 Oct 2011 00:53:00 -0600 Subject: ARM: OMAP3+: dpll: assign clk rate from rounded rate during rate set The rounded rate can differ from target rate, so to better reflect reality set clk->rate equal to the rounded rate when setting DPLL frequency. This avoids issues where the DPLL frequency is slightly different than what debugfs clock tree reports using the old target rate. An example of a clock that requires this is DPLL_ABE on OMAP4 which can have a 4x multiplier on top of the usual MN dividers depending on register settings. This requires a special round_rate function that might yield a rate different from the initial target. Signed-off-by: Mike Turquette Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/dpll3xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 6b0fa3786022..73a1595c5f21 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -455,7 +455,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) new_parent = dd->clk_bypass; } else { if (dd->last_rounded_rate != rate) - clk->round_rate(clk, rate); + rate = clk->round_rate(clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; -- cgit v1.2.3 From 49642ac816a714f3037b7cd6401a46c8fe46e795 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 7 Oct 2011 00:53:01 -0600 Subject: ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rate This is a continuation of Mike Turquette's patch "OMAP3+: use DPLL's round_rate when setting rate". omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call omap2_get_dpll_rate() explicitly. It may be necessary for some DPLLs to use a different function and so use the DPLLs recalc() function pointer instead. An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier in addition to the usual MN multipler and dividers and therefore uses a different round_rate and recalc function. Signed-off-by: Jon Hunter Cc: Mike Turquette Cc: Misael Lopez Cruz [paul@pwsan.com: merged this patch with Mike's "use clock's recalc in DPLL handling" patch; also reported by Misael] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/dpll3xxx.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 73a1595c5f21..fc56745676fa 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -390,7 +390,8 @@ int omap3_noncore_dpll_enable(struct clk *clk) * propagating? */ if (!r) - clk->rate = omap2_get_dpll_rate(clk); + clk->rate = (clk->recalc) ? clk->recalc(clk) : + omap2_get_dpll_rate(clk); return r; } @@ -424,6 +425,7 @@ void omap3_noncore_dpll_disable(struct clk *clk) int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) { struct clk *new_parent = NULL; + unsigned long hw_rate; u16 freqsel = 0; struct dpll_data *dd; int ret; @@ -435,7 +437,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) if (!dd) return -EINVAL; - if (rate == omap2_get_dpll_rate(clk)) + hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk); + if (rate == hw_rate) return 0; /* -- cgit v1.2.3 From 52a3a4d4610cfad536b8ac94b9a2f5ebfa51c06b Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 7 Oct 2011 00:53:08 -0600 Subject: ARM: OMAP4460: Clock: Adding support for 4460 specific clocks OMAP4460 specific clocks are not getting added as the cpu_is_omap44xx is choosing only OMAP4430 specific clock nodes. Changing it to add to OMAP4460 specific clocks also. This is clocks are required of temperature sensor. Signed-off-by: Vishwanath BS Signed-off-by: Keerthy Cc: paul@pwsan.com [paul@pwsan.com: updated to apply] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock44xx_data.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index c98c0a22c188..7b028ecce37a 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -1398,9 +1398,9 @@ static struct clk dss_dss_clk = { }; static const struct clksel_rate div3_8to32_rates[] = { - { .div = 8, .val = 0, .flags = RATE_IN_44XX }, - { .div = 16, .val = 1, .flags = RATE_IN_44XX }, - { .div = 32, .val = 2, .flags = RATE_IN_44XX }, + { .div = 8, .val = 0, .flags = RATE_IN_4460 }, + { .div = 16, .val = 1, .flags = RATE_IN_4460 }, + { .div = 32, .val = 2, .flags = RATE_IN_4460 }, { .div = 0 }, }; @@ -3370,12 +3370,12 @@ int __init omap4xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg; - if (cpu_is_omap44xx()) { + if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; } else if (cpu_is_omap446x()) { - cpu_mask = RATE_IN_4460; - cpu_clkflg = CK_446X; + cpu_mask = RATE_IN_4460 | RATE_IN_4430; + cpu_clkflg = CK_446X | CK_443X; } else { return 0; } -- cgit v1.2.3 From cf2a82d7462e8c728260ee09e46c573fab2f89cf Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 7 Oct 2011 00:53:09 -0600 Subject: ARM: OMAP4: clock: Add missing clock divider for OCP_ABE_ICLK The parent clock of the OCP_ABE_ICLK is the AESS_FCLK and the parent clock of the AESS_FCLK is the ABE_FCLK... ABE_FCLK --> AESS_FCLK --> OCP_ABE_ICLK The AESS_FCLK and OCP_ABE_ICLK clocks both have dividers which determine their operational frequency. However, the dividers for the AESS_FCLK and OCP_ABE_ICLK are controlled via a single bit, which is the CM1_ABE_AESS_CLKCTRL[24] bit. When this bit is set to 0, the AESS_FCLK divider is 1 and the OCP_ABE_ICLK divider is 2. Similarly, when this bit is set to 1, the AESS_FCLK divider is 2 and the OCP_ABE_ICLK is 1. The above relationship between the AESS_FCLK and OCP_ABE_ICLK dividers ensure that the OCP_ABE_ICLK clock is always half the frequency of the ABE_CLK... OCP_ABE_ICLK = ABE_FCLK/2 The divider for the OCP_ABE_ICLK is currently missing so add a divider that will ensure the OCP_ABE_ICLK frequency is always half the ABE_FCLK frequency. Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock44xx_data.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 7b028ecce37a..a145e322635f 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -1195,11 +1195,25 @@ static struct clk l4_wkup_clk_mux_ck = { .recalc = &omap2_clksel_recalc, }; +static const struct clksel_rate div2_2to1_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 }, + { .div = 2, .val = 0, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel ocp_abe_iclk_div[] = { + { .parent = &aess_fclk, .rates = div2_2to1_rates }, + { .parent = NULL }, +}; + static struct clk ocp_abe_iclk = { .name = "ocp_abe_iclk", .parent = &aess_fclk, + .clksel = ocp_abe_iclk_div, + .clksel_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_AESS_FCLK_MASK, .ops = &clkops_null, - .recalc = &followparent_recalc, + .recalc = &omap2_clksel_recalc, }; static struct clk per_abe_24m_fclk = { -- cgit v1.2.3 From 1194d7b82486ad967db65115559e9ad50a88ba57 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Fri, 7 Oct 2011 01:44:20 -0600 Subject: ARM: OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices The OMAP36xx and OMAP4xxx DPLLs have a different internal reference clock frequency (fint) operating range than OMAP3430. Update the dpll_test_fint() function to check for the correct frequency ranges for OMAP36xx and OMAP4xxx. For OMAP36xx and OMAP4xxx devices, DPLLs fint range is 0.5MHz to 2.5MHz for j-type DPLLs and otherwise it is 32KHz to 52MHz for all other DPLLs. Signed-off-by: Jon Hunter Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clkt_dpll.c | 51 ++++++++++++++++++++++++++++------------- 1 file changed, 35 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index bcffee001bfa..e069a9be93df 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -46,10 +46,19 @@ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ -#define DPLL_FINT_BAND1_MIN 750000 -#define DPLL_FINT_BAND1_MAX 2100000 -#define DPLL_FINT_BAND2_MIN 7500000 -#define DPLL_FINT_BAND2_MAX 21000000 +#define OMAP3430_DPLL_FINT_BAND1_MIN 750000 +#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 +#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000 +#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000 + +/* + * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. + * From device data manual section 4.3 "DPLL and DLL Specifications". + */ +#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000 +#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000 +#define OMAP3PLUS_DPLL_FINT_MIN 32000 +#define OMAP3PLUS_DPLL_FINT_MAX 52000000 /* _dpll_test_fint() return codes */ #define DPLL_FINT_UNDERFLOW -1 @@ -71,33 +80,43 @@ static int _dpll_test_fint(struct clk *clk, u8 n) { struct dpll_data *dd; - long fint; + long fint, fint_min, fint_max; int ret = 0; dd = clk->dpll_data; /* DPLL divider must result in a valid jitter correction val */ fint = clk->parent->rate / n; - if (fint < DPLL_FINT_BAND1_MIN) { + if (cpu_is_omap24xx()) { + /* Should not be called for OMAP2, so warn if it is called */ + WARN(1, "No fint limits available for OMAP2!\n"); + return DPLL_FINT_INVALID; + } else if (cpu_is_omap3430()) { + fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; + fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; + } else if (dd->flags & DPLL_J_TYPE) { + fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN; + fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX; + } else { + fint_min = OMAP3PLUS_DPLL_FINT_MIN; + fint_max = OMAP3PLUS_DPLL_FINT_MAX; + } + + if (fint < fint_min) { pr_debug("rejecting n=%d due to Fint failure, " "lowering max_divider\n", n); dd->max_divider = n; ret = DPLL_FINT_UNDERFLOW; - - } else if (fint > DPLL_FINT_BAND1_MAX && - fint < DPLL_FINT_BAND2_MIN) { - - pr_debug("rejecting n=%d due to Fint failure\n", n); - ret = DPLL_FINT_INVALID; - - } else if (fint > DPLL_FINT_BAND2_MAX) { - + } else if (fint > fint_max) { pr_debug("rejecting n=%d due to Fint failure, " "boosting min_divider\n", n); dd->min_divider = n; ret = DPLL_FINT_INVALID; - + } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX && + fint < OMAP3430_DPLL_FINT_BAND2_MIN) { + pr_debug("rejecting n=%d due to Fint failure\n", n); + ret = DPLL_FINT_INVALID; } return ret; -- cgit v1.2.3 From 46f8c3c7e95c0d30d95911e7975ddc4f93b3e237 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Fri, 7 Oct 2011 03:08:44 -0600 Subject: ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields Fix the shift and mask macros for DSIx_PPID fields in CONTROL_DSIPHY. The OMAP4430 Public TRM vV has these fields mentioned correctly. Signed-off-by: Archit Taneja Acked-by: Benoit Cousson Acked-by: Santosh Shilimkar Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h index c88420de1151..1e2d3322f33e 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -941,10 +941,10 @@ #define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) #define OMAP4_DSI1_LANEENABLE_SHIFT 24 #define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI1_PIPD_SHIFT 19 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI2_PIPD_SHIFT 14 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) +#define OMAP4_DSI2_PIPD_SHIFT 19 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI1_PIPD_SHIFT 14 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 14) /* CONTROL_MCBSPLP */ #define OMAP4_ALBCTRLRX_FSX_SHIFT 31 -- cgit v1.2.3 From 7e89098cd63a188932043258d54688e965750e2c Mon Sep 17 00:00:00 2001 From: Abhilash K V Date: Fri, 7 Oct 2011 03:08:56 -0600 Subject: ARM: OMAP: AM35x: remove hwmods that aren't generic Removing modules iva, sr1_hwmod, sr2_hwmod, mailbox from the base omap3xxx_hwmods list, so that they can be excluded for am35x. This removes quite a few warnings on boot for AM35x. Signed-off-by: Abhilash K V [paul@pwsan.com: dropped 'mailbox class' comments; updated changelog] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ab35acbc2d1d..ac12cd5fb073 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3132,7 +3132,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_mmc2_hwmod, &omap3xxx_mmc3_hwmod, &omap3xxx_mpu_hwmod, - &omap3xxx_iva_hwmod, &omap3xxx_timer1_hwmod, &omap3xxx_timer2_hwmod, @@ -3161,8 +3160,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, &omap3xxx_i2c3_hwmod, - &omap34xx_sr1_hwmod, - &omap34xx_sr2_hwmod, /* gpio class */ &omap3xxx_gpio1_hwmod, @@ -3184,8 +3181,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_mcbsp2_sidetone_hwmod, &omap3xxx_mcbsp3_sidetone_hwmod, - /* mailbox class */ - &omap3xxx_mailbox_hwmod, /* mcspi class */ &omap34xx_mcspi1, @@ -3198,31 +3193,39 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* 3430ES1-only hwmods */ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { + &omap3xxx_iva_hwmod, &omap3430es1_dss_core_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; /* 3430ES2+-only hwmods */ static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { + &omap3xxx_iva_hwmod, &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; /* 34xx-only hwmods (all ES revisions) */ static __initdata struct omap_hwmod *omap34xx_hwmods[] = { + &omap3xxx_iva_hwmod, &omap34xx_sr1_hwmod, &omap34xx_sr2_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; /* 36xx-only hwmods (all ES revisions) */ static __initdata struct omap_hwmod *omap36xx_hwmods[] = { + &omap3xxx_iva_hwmod, &omap3xxx_uart4_hwmod, &omap3xxx_dss_core_hwmod, &omap36xx_sr1_hwmod, &omap36xx_sr2_hwmod, &omap3xxx_usbhsotg_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; -- cgit v1.2.3 From ff2f8e5ffb23de6e2284f31651447cb80a4c9d1b Mon Sep 17 00:00:00 2001 From: Charulatha V Date: Tue, 13 Sep 2011 18:32:37 +0530 Subject: ARM: OMAP3: PM: fix pwrdm_post_transition call sequence The context lost count is modified in omap_sram_idle() path when pwrdm_post_transition() is called. But pwrdm_post_transition() is called only after omap_gpio_resume_after_idle() is called. Correct this so that context lost count is modified before calling omap_gpio_resume_after_idle(). This would be useful when OMAP GPIO save/restore context is called by the OMAP GPIO driver itself. Signed-off-by: Charulatha V Reviewed-by: Santosh Shilimkar Acked-by: Tony Lindgren Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7255d9bce868..1915050e9401 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -363,7 +363,6 @@ void omap_sram_idle(void) printk(KERN_ERR "Invalid mpu state in sram_idle\n"); return; } - pwrdm_pre_transition(); /* NEON control */ if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON) @@ -386,6 +385,8 @@ void omap_sram_idle(void) if (!console_trylock()) goto console_still_active; + pwrdm_pre_transition(); + /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; @@ -455,6 +456,8 @@ void omap_sram_idle(void) } omap3_intc_resume_idle(); + pwrdm_post_transition(); + /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); @@ -478,8 +481,6 @@ console_still_active: omap3_disable_io_chain(); } - pwrdm_post_transition(); - clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } -- cgit v1.2.3 From b02b917211d50ad5dc13e49c933ef916b10e0d00 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 6 Oct 2011 17:18:45 -0600 Subject: ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection The way that we detect which OMAP3 chips support I/O wakeup and software I/O chain clock control is broken. Currently, I/O wakeup is marked as present for all OMAP3 SoCs other than the AM3505/3517. The TI81xx family of SoCs are at present considered to be OMAP3 SoCs, but don't support I/O wakeup. To resolve this, convert the existing blacklist approach to an explicit, whitelist support, in which only SoCs which are known to support I/O wakeup are listed. (At present, this only includes OMAP34xx, OMAP3503, OMAP3515, OMAP3525, OMAP3530, and OMAP36xx.) Also, the current code incorrectly detects the presence of a software-controllable I/O chain clock on several chips that don't support it. This results in writes to reserved bitfields, unnecessary delays, and console messages on kernels running on those chips: http://www.spinics.net/lists/linux-omap/msg58735.html Convert this test to a feature test with a chip-by-chip whitelist. Thanks to Dave Hylands for reporting this problem and doing some testing to help isolate the cause. Thanks to Steve Sakoman for catching a bug in the first version of this patch. Thanks to Russell King for comments. Signed-off-by: Paul Walmsley Cc: Dave Hylands Cc: Steve Sakoman Tested-by: Steve Sakoman Cc: Russell King - ARM Linux Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/id.c | 5 +++- arch/arm/mach-omap2/pm34xx.c | 43 ++++++++++++++++++----------------- arch/arm/plat-omap/include/plat/cpu.h | 17 ++++++++++---- 3 files changed, 38 insertions(+), 27 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 37efb8696927..a1ccb66fbe75 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -201,8 +201,11 @@ static void __init omap3_check_features(void) OMAP3_CHECK_FEATURE(status, ISP); if (cpu_is_omap3630()) omap_features |= OMAP3_HAS_192MHZ_CLK; - if (!cpu_is_omap3505() && !cpu_is_omap3517()) + if (cpu_is_omap3430() || cpu_is_omap3630()) omap_features |= OMAP3_HAS_IO_WAKEUP; + if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || + omap_rev() == OMAP3430_REV_ES3_1_2) + omap_features |= OMAP3_HAS_IO_CHAIN_CTRL; omap_features |= OMAP3_HAS_SDRC; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1915050e9401..bfa8b8c8171a 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -99,31 +99,27 @@ static void omap3_enable_io_chain(void) { int timeout = 0; - if (omap_rev() >= OMAP3430_REV_ES3_1) { - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - /* Do a readback to assure write has been done */ - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - - while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) & - OMAP3430_ST_IO_CHAIN_MASK)) { - timeout++; - if (timeout > 1000) { - printk(KERN_ERR "Wake up daisy chain " - "activation failed.\n"); - return; - } - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, - WKUP_MOD, PM_WKEN); + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + /* Do a readback to assure write has been done */ + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); + + while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) & + OMAP3430_ST_IO_CHAIN_MASK)) { + timeout++; + if (timeout > 1000) { + pr_err("Wake up daisy chain activation failed.\n"); + return; } + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, + WKUP_MOD, PM_WKEN); } } static void omap3_disable_io_chain(void) { - if (omap_rev() >= OMAP3430_REV_ES3_1) - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); } static void omap3_core_save_context(void) @@ -375,7 +371,8 @@ void omap_sram_idle(void) (per_next_state < PWRDM_POWER_ON || core_next_state < PWRDM_POWER_ON)) { omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - omap3_enable_io_chain(); + if (omap3_has_io_chain_ctrl()) + omap3_enable_io_chain(); } /* Block console output in case it is on one of the OMAP UARTs */ @@ -478,7 +475,8 @@ console_still_active: core_next_state < PWRDM_POWER_ON)) { omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - omap3_disable_io_chain(); + if (omap3_has_io_chain_ctrl()) + omap3_disable_io_chain(); } clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); @@ -871,6 +869,9 @@ static int __init omap3_pm_init(void) if (!cpu_is_omap34xx()) return -ENODEV; + if (!omap3_has_io_chain_ctrl()) + pr_warning("PM: no software I/O chain control; some wakeups may be lost\n"); + pm_errata_configure(); /* XXX prcm_setup_regs needs to be before enabling hw diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67b3d75884cd..3a280aaf9675 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -477,6 +477,13 @@ void omap2_check_revision(void); /* * Runtime detection of OMAP3 features + * + * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip + * family have OS-level control over the I/O chain clock. This is + * to avoid a window during which wakeups could potentially be lost + * during powerdomain transitions. If this bit is set, it + * indicates that the chip does support OS-level control of this + * feature. */ extern u32 omap_features; @@ -488,9 +495,10 @@ extern u32 omap_features; #define OMAP3_HAS_192MHZ_CLK BIT(5) #define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_SDRC BIT(7) -#define OMAP4_HAS_MPU_1GHZ BIT(8) -#define OMAP4_HAS_MPU_1_2GHZ BIT(9) -#define OMAP4_HAS_MPU_1_5GHZ BIT(10) +#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) +#define OMAP4_HAS_MPU_1GHZ BIT(9) +#define OMAP4_HAS_MPU_1_2GHZ BIT(10) +#define OMAP4_HAS_MPU_1_5GHZ BIT(11) #define OMAP3_HAS_FEATURE(feat,flag) \ @@ -507,12 +515,11 @@ OMAP3_HAS_FEATURE(isp, ISP) OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) OMAP3_HAS_FEATURE(sdrc, SDRC) +OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) /* * Runtime detection of OMAP4 features */ -extern u32 omap_features; - #define OMAP4_HAS_FEATURE(feat, flag) \ static inline unsigned int omap4_has_ ##feat(void) \ { \ -- cgit v1.2.3 From 3047454475adca98e30e00dfca21021a0de99d78 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 6 Oct 2011 13:43:23 -0600 Subject: ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only Based on the documents that I have here, there doesn't appear to be an equivalent to erratum i443 for OMAP3630, so restrict this one to OMAP34xx chips. Also, explicitly restrict this erratum to EMU and HS devices. Signed-off-by: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index bfa8b8c8171a..b2740c5e0504 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -407,13 +407,14 @@ void omap_sram_idle(void) omap3_intc_prepare_idle(); /* - * On EMU/HS devices ROM code restores a SRDC value - * from scratchpad which has automatic self refresh on timeout - * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443. - * Hence store/restore the SDRC_POWER register here. - */ - if (omap_rev() >= OMAP3430_REV_ES3_0 && - omap_type() != OMAP2_DEVICE_TYPE_GP && + * On EMU/HS devices ROM code restores a SRDC value + * from scratchpad which has automatic self refresh on timeout + * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443. + * Hence store/restore the SDRC_POWER register here. + */ + if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 && + (omap_type() == OMAP2_DEVICE_TYPE_EMU || + omap_type() == OMAP2_DEVICE_TYPE_SEC) && core_next_state == PWRDM_POWER_OFF) sdrc_pwr = sdrc_read_reg(SDRC_POWER); @@ -430,8 +431,9 @@ void omap_sram_idle(void) omap34xx_do_sram_idle(save_state); /* Restore normal SDRC POWER settings */ - if (omap_rev() >= OMAP3430_REV_ES3_0 && - omap_type() != OMAP2_DEVICE_TYPE_GP && + if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 && + (omap_type() == OMAP2_DEVICE_TYPE_EMU || + omap_type() == OMAP2_DEVICE_TYPE_SEC) && core_next_state == PWRDM_POWER_OFF) sdrc_write_reg(sdrc_pwr, SDRC_POWER); -- cgit v1.2.3 From 51ce185af0f71b65c23ed719f72d0241895a61da Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 1 Nov 2011 00:51:30 -0700 Subject: sparc: Hook up process_vm_{readv,writev} syscalls. Signed-off-by: David S. Miller --- arch/sparc/include/asm/unistd.h | 4 +++- arch/sparc/kernel/systbls_32.S | 2 +- arch/sparc/kernel/systbls_64.S | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 6260d5deeabc..c7cb0af0eb59 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -406,8 +406,10 @@ #define __NR_syncfs 335 #define __NR_sendmmsg 336 #define __NR_setns 337 +#define __NR_process_vm_readv 338 +#define __NR_process_vm_writev 339 -#define NR_syscalls 338 +#define NR_syscalls 340 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 09d8ec454450..63402f9e9f51 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -84,4 +84,4 @@ sys_call_table: /*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime -/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns +/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index edbec45d4688..db86b1a0e9a9 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -85,7 +85,7 @@ sys_call_table32: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime - .word sys_syncfs, compat_sys_sendmmsg, sys_setns + .word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev #endif /* CONFIG_COMPAT */ @@ -162,4 +162,4 @@ sys_call_table: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime - .word sys_syncfs, sys_sendmmsg, sys_setns + .word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev -- cgit v1.2.3 From 47a6770ac6cd0d28f14dd9e1b17705abe6f05e41 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 25 Oct 2011 09:35:19 -0700 Subject: msm: boards: Fix fallout from removal of machine_desc in fixup After 0744a3ee (ARM: platform fixups: remove mdesc argument to fixup function, 2010-12-20) the fixup functions introduced in 9e775ad (ARM: 7012/1: Set proper TEXT_OFFSET for newer MSMs, 2011-08-12) cause warnings like: arch/arm/mach-msm/board-msm8x60.c:85: warning: initialization from incompatible pointer type Fix them by removing the machine_desc argument from the fixup functions. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm7x30.c | 4 ++-- arch/arm/mach-msm/board-msm8960.c | 4 ++-- arch/arm/mach-msm/board-msm8x60.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 71de5062c71e..db81ed531031 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -42,8 +42,8 @@ extern struct sys_timer msm_timer; -static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm7x30_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index b04468e7d00e..6dc1cbd2a595 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -32,8 +32,8 @@ #include "devices.h" -static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm8960_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 106170fb1844..eed73e2609ed 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -30,8 +30,8 @@ #include #include -static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) +static void __init msm8x60_fixup(struct tag *tag, char **cmdline, + struct meminfo *mi) { for (; tag->hdr.size; tag = tag_next(tag)) if (tag->hdr.tag == ATAG_MEM && -- cgit v1.2.3 From a918feef334090692ea65e77a8b0cca5e682e666 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Wed, 2 Nov 2011 17:30:49 +0000 Subject: ARM: mxc: fix local timer interrupt handling As local timer interrupts are now handled as normal interrupts, remove the special case in the GIC handler. Cc: Shawn Guo Cc: Sascha Hauer Signed-off-by: Marc Zyngier Tested-and-Acked-by: Shawn Guo --- arch/arm/plat-mxc/gic.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c index b3b8eed263b8..12f8f8109010 100644 --- a/arch/arm/plat-mxc/gic.c +++ b/arch/arm/plat-mxc/gic.c @@ -28,21 +28,14 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) if (irqnr == 1023) break; - if (irqnr > 29 && irqnr < 1021) + if (irqnr > 15 && irqnr < 1021) handle_IRQ(irqnr, regs); #ifdef CONFIG_SMP - else if (irqnr < 16) { + else { writel_relaxed(irqstat, gic_cpu_base_addr + GIC_CPU_EOI); handle_IPI(irqnr, regs); } -#endif -#ifdef CONFIG_LOCAL_TIMERS - else if (irqnr == 29) { - writel_relaxed(irqstat, gic_cpu_base_addr + - GIC_CPU_EOI); - handle_local_timer(regs); - } #endif } while (1); } -- cgit v1.2.3 From 98de0cbbe2e7157fd87d04386621be3eadd4d6ab Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 3 Nov 2011 17:31:26 +0800 Subject: ARM:i.MX: fix build error in tzic/avic.c arch/arm/plat-mxc/tzic.c:105: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'tzic_handle_irq' Signed-off-by: Jason Liu --- arch/arm/plat-mxc/avic.c | 1 + arch/arm/plat-mxc/tzic.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 8875fb415f68..55f15699a383 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "irq-common.h" diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index e993a184189a..a3c164c7ba82 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -17,6 +17,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From 188d7c6b0cfee134cc7fbc61d36223b1d7dfffab Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Thu, 3 Nov 2011 17:31:27 +0800 Subject: ARM:i.MX: fix build error in clock-mx51-mx53.c arch/arm/mach-mx5/clock-mx51-mx53.c: In function 'clk_get_freq_dt': arch/arm/mach-mx5/clock-mx51-mx53.c:1643: error: implicit declaration of function 'for_each_compatible_node' arch/arm/mach-mx5/clock-mx51-mx53.c:1643: error: expected ';' before '{' token Signed-off-by: Jason Liu --- arch/arm/mach-mx5/clock-mx51-mx53.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 2aacf41c48e7..6312425c0056 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1634,6 +1634,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc, return 0; } +#ifdef CONFIG_OF static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc, unsigned long *ckih1, unsigned long *ckih2) { @@ -1671,3 +1672,4 @@ int __init mx53_clocks_init_dt(void) clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2); return mx53_clocks_init(ckil, osc, ckih1, ckih2); } +#endif -- cgit v1.2.3 From 15394cad2747ea2d98fc88ccb464973e173cd2f8 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Fri, 4 Nov 2011 20:30:18 +0800 Subject: ARM: mxc: Remove test_for_ltirq The patch "ARM: gic: consolidate PPI handling" removes the usage of test_for_ltirq. After the merge of imx6q remove this there, too. Cc: Sascha Hauer Signed-off-by: Dirk Behme Acked-by: Shawn Guo Acked-by: Marc Zyngier --- arch/arm/plat-mxc/include/mach/entry-macro.S | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 9fe0dfcf4e7e..ca5cf26a04b1 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -25,6 +25,3 @@ .macro test_for_ipi, irqnr, irqstat, base, tmp .endm - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - .endm -- cgit v1.2.3 From dfd3b596fbbfa48b8e7966ef996d587157554b69 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 4 Nov 2011 22:13:50 +0900 Subject: sh: Fix cached/uncaced address calculation in 29bit mode In the case of 29bit mode, CAC/UNCAC_ADDR does not return a right address. This revises this problem by using P1SEGADDR and P2SEGADDR in 29bit mode. Reported-by: Yutaro Ebihara Signed-off-by: Nobuhiro Iwamatsu Tested-by: Kuninori Morimoto Tested-by: Simon Horman Cc: stable@kernel.org Signed-off-by: Paul Mundt --- arch/sh/include/asm/page.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index 0dca9a5c6be6..15d970328f71 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -151,8 +151,13 @@ typedef struct page *pgtable_t; #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_UNCACHED_MAPPING +#if defined(CONFIG_29BIT) +#define UNCAC_ADDR(addr) P2SEGADDR(addr) +#define CAC_ADDR(addr) P1SEGADDR(addr) +#else #define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + uncached_start) #define CAC_ADDR(addr) ((addr) - uncached_start + PAGE_OFFSET) +#endif #else #define UNCAC_ADDR(addr) ((addr)) #define CAC_ADDR(addr) ((addr)) -- cgit v1.2.3 From 3af1f8a41feab47b232b0c3d3b2322426672480d Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Mon, 3 Oct 2011 15:16:47 +0100 Subject: serial: sh-sci: Fix up SH-2A SCIF support. This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As expected, it's close to the SH-4A SCIF with fifodata, but still different enough to warrant its own type. Fixes up a number of FIFO overflows and similar for both SH7203/SH7264. Signed-off-by: Phil Edworthy Tested-by: Federico Fuga Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 16 ++++++++++++---- drivers/tty/serial/sh-sci.c | 19 +++++++++++++++++++ include/linux/serial_sci.h | 1 + 3 files changed, 32 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index a43124e608c3..0bd744f9a3b7 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -176,10 +176,12 @@ static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, static struct plat_sci_port scif0_platform_data = { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 192, 192, 192, 192 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -193,10 +195,12 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 196, 196, 196, 196 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -210,10 +214,12 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 200, 200, 200, 200 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -227,10 +233,12 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | + SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 204, 204, 204, 204 }, + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9871c57b348e..1b6ec568f32a 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -206,6 +206,25 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCLSR] = sci_reg_invalid, }, + /* + * Common SH-2(A) SCIF definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + /* * Common SH-3 SCIF definitions. */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 8bffe9ae2ca0..5f3939c67dd8 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -67,6 +67,7 @@ enum { SCIx_IRDA_REGTYPE, SCIx_SCIFA_REGTYPE, SCIx_SCIFB_REGTYPE, + SCIx_SH2_SCIF_FIFODATA_REGTYPE, SCIx_SH3_SCIF_REGTYPE, SCIx_SH4_SCIF_REGTYPE, SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, -- cgit v1.2.3 From c4e2d2457afd6da3ddee18c2a1befca287e029c7 Mon Sep 17 00:00:00 2001 From: Sanjeev Premi Date: Thu, 13 Oct 2011 21:44:10 +0530 Subject: ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi Acked-by: Thomas Weber [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-generic.c | 8 ++++++++ arch/arm/mach-omap2/io.c | 6 ++++++ 2 files changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0cc9094e5ee0..fb55fa3dad5a 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -28,6 +28,7 @@ * XXX: Still needed to boot until the i2c & twl driver is adapted to * device-tree */ +#ifdef CONFIG_ARCH_OMAP4 static struct twl4030_platform_data sdp4430_twldata = { .irq_base = TWL6030_IRQ_BASE, .irq_end = TWL6030_IRQ_END, @@ -37,7 +38,9 @@ static void __init omap4_i2c_init(void) { omap4_pmic_init("twl6030", &sdp4430_twldata); } +#endif +#ifdef CONFIG_ARCH_OMAP3 static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -47,6 +50,7 @@ static void __init omap3_i2c_init(void) { omap3_pmic_init("twl4030", &beagle_twldata); } +#endif static struct of_device_id omap_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, @@ -72,17 +76,21 @@ static void __init omap_generic_init(void) of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); } +#ifdef CONFIG_ARCH_OMAP4 static void __init omap4_init(void) { omap4_i2c_init(); omap_generic_init(); } +#endif +#ifdef CONFIG_ARCH_OMAP3 static void __init omap3_init(void) { omap3_i2c_init(); omap_generic_init(); } +#endif #if defined(CONFIG_SOC_OMAP2420) static const char *omap242x_boards_compat[] __initdata = { diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index a5d8dce2a70b..25d20ced03e1 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -359,6 +359,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } +#ifdef CONFIG_ARCH_OMAP2 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -382,11 +383,13 @@ void __init omap2430_init_early(void) omap_hwmod_init_postsetup(); omap2430_clk_init(); } +#endif /* * Currently only board-omap3beagle.c should call this because of the * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT. */ +#ifdef CONFIG_ARCH_OMAP3 void __init omap3_init_early(void) { omap2_set_globals_3xxx(); @@ -430,7 +433,9 @@ void __init ti816x_init_early(void) omap_hwmod_init_postsetup(); omap3xxx_clk_init(); } +#endif +#ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { omap2_set_globals_443x(); @@ -442,6 +447,7 @@ void __init omap4430_init_early(void) omap_hwmod_init_postsetup(); omap4xxx_clk_init(); } +#endif void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) -- cgit v1.2.3 From 927dbbb22c54347a0ba3a4eab2cbc46260afad32 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 3 Nov 2011 10:41:22 +0200 Subject: ARM: OMAP2+: devices: Fixes for McPDM Commit f718e2c034bf6ff872106344935006230764cb12 (ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures) removed these structures. Commit 3528c58eb9e818b7821501afa2916eb12131994a (OMAP: omap_device: when building return platform_device instead of omap_device) now returns platform_device instead of omap_device. Fix up the omap-mcpdm init function since this part comes via sound tree, and there has been changes regarding to hwmod/omap_device_build. Signed-off-by: Peter Ujfalusi CC: Benoit Cousson CC: Kevin Hilman [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 68ec03152d5f..c15cfada5f13 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -318,18 +318,10 @@ static inline void omap_init_audio(void) {} #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) -static struct omap_device_pm_latency omap_mcpdm_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static void omap_init_mcpdm(void) { struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; oh = omap_hwmod_lookup("mcpdm"); if (!oh) { @@ -337,11 +329,8 @@ static void omap_init_mcpdm(void) return; } - od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, - omap_mcpdm_latency, - ARRAY_SIZE(omap_mcpdm_latency), 0); - if (IS_ERR(od)) - printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n"); + pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n"); } #else static inline void omap_init_mcpdm(void) {} -- cgit v1.2.3 From d4fc7eb5c597c65739faa776783b2e28bf0d7296 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 2 Nov 2011 09:40:11 +0800 Subject: ARM: OMAP2+: l3-noc: Include linux/module.h Include linux/module.h to fix below build error: CC arch/arm/mach-omap2/omap_l3_noc.o arch/arm/mach-omap2/omap_l3_noc.c:240: error: expected ',' or ';' before 'MODULE_DEVICE_TABLE' arch/arm/mach-omap2/omap_l3_noc.c:250: error: 'THIS_MODULE' undeclared here (not in a function) make[1]: *** [arch/arm/mach-omap2/omap_l3_noc.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Axel Lin Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_l3_noc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index c8b1bef92e5a..6a66aa5e2a5b 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -20,6 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA */ +#include #include #include #include -- cgit v1.2.3 From 869dec1582af755a84ba993580f6588559e197b4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 2 Nov 2011 09:49:46 +0800 Subject: ARM: OMAP: dmtimer: Include linux/module.h Include linux/module.h to fix below build error: CC arch/arm/plat-omap/dmtimer.o arch/arm/plat-omap/dmtimer.c:184: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:184: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:184: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:215: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:215: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:215: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:228: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:228: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:228: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:234: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:234: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:234: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:240: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:240: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:240: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:248: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:248: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:248: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:294: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:294: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:294: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:302: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:302: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:302: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:316: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:316: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:316: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:344: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:344: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:344: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:361: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:361: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:361: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:380: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:380: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:380: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:406: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:406: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:406: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:443: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:443: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:443: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:468: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:468: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:468: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:494: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:494: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:494: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:517: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:517: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:517: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:534: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:534: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:534: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:549: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:549: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:549: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:561: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:561: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:561: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:572: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:572: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:572: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:587: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:587: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:587: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:604: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:604: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/arm/plat-omap/dmtimer.c:604: warning: parameter names (without types) in function declaration arch/arm/plat-omap/dmtimer.c:746: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:746: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:746: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-omap/dmtimer.c:746: warning: function declaration isn't a prototype arch/arm/plat-omap/dmtimer.c:747: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:747: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:747: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-omap/dmtimer.c:747: warning: function declaration isn't a prototype arch/arm/plat-omap/dmtimer.c:748: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:748: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:748: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' arch/arm/plat-omap/dmtimer.c:748: warning: function declaration isn't a prototype arch/arm/plat-omap/dmtimer.c:749: error: expected declaration specifiers or '...' before string constant arch/arm/plat-omap/dmtimer.c:749: warning: data definition has no type or storage class arch/arm/plat-omap/dmtimer.c:749: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-omap/dmtimer.c:749: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-omap/dmtimer.o] Error 1 make: *** [arch/arm/plat-omap] Error 2 Signed-off-by: Axel Lin Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dmtimer.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 2def4e1990ed..af3b92be8459 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -35,6 +35,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include -- cgit v1.2.3 From af504e5d39de35dc3de5f42c357fe1b519fea33f Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 2 Nov 2011 12:54:03 +0100 Subject: ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success Commit 4d17aeb1c5b2375769446d13012a98e6d265ec13 ("OMAP: I2C: split device registration and convert OMAP2+ to omap_device") makes omap2_i2c_add_bus() return a pointer to an omap_device instead on success instead of 0. This breaks the omap_register_i2c_bus() ABI and results in the igep0020 board code detecting an I2C bus registration error when there is none. Fix the problem by using PTR_RET() instead of PTR_ERR() in omap2_i2c_add_bus(). Reported-by: Alexander Kinzer Signed-off-by: Laurent Pinchart [tony@atomide.com: updated to return pdev instead of od] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 679cbd49c019..db071bc71c4d 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -184,7 +184,7 @@ static inline int omap2_i2c_add_bus(int bus_id) NULL, 0, 0); WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - return PTR_ERR(pdev); + return PTR_RET(pdev); } #else static inline int omap2_i2c_add_bus(int bus_id) -- cgit v1.2.3 From ace9021698ef7d298e6d184ae2880b1cb3ebc4c7 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 6 Oct 2011 14:39:28 -0600 Subject: ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list Commit d6504acd2125984c61dce24727dd3842d0144015 ("OMAP2+: hwmod: remove OMAP_CHIP*") tests the inverse condition of what it should be testing for the return value from omap_hwmod_register(). This causes several IP blocks to not be registered on several OMAP3 family devices. Fixing that bug also unmasked another bug, originally reported by Chase Maupin and then subsequently by Abhilash K V , which caused SmartReflex IP blocks to be registered on SoCs that don't support them. Thanks to Russell King - ARM Linux for comments on a previous version of the patch. Signed-off-by: Paul Walmsley Cc: Chase Maupin Cc: Abhilash K V Cc: Russell King - ARM Linux Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 87a3b01d254c..bc9035ec87fc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3270,7 +3270,7 @@ int __init omap3xxx_hwmod_init(void) /* Register hwmods common to all OMAP3 */ r = omap_hwmod_register(omap3xxx_hwmods); - if (!r) + if (r < 0) return r; rev = omap_rev(); @@ -3295,7 +3295,7 @@ int __init omap3xxx_hwmod_init(void) }; r = omap_hwmod_register(h); - if (!r) + if (r < 0) return r; /* -- cgit v1.2.3 From ff2beb1d9f2fecc3f5c1d67bfec1183a5a476586 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 3 Oct 2011 17:52:50 +0530 Subject: ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF MMC1 data line IO's are powered down in before set regulator function. IO's should not be powered ON when regulator is OFF. Keep the IO's in power pown mode after regulator OFF otherwise VMODE_ERROR interrupt is generated due to mismatch in input (regulator) voltage and MMC IO drive voltage. Delete incorrect comments which are not applicable for OMAP4. Signed-off-by: Balaji T K Signed-off-by: Kishore Kadiyala Reported-by: Viswanath Puttagunta Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 77085847e4e7..d663649f6923 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -129,15 +129,11 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the * card with Vcc regulator (from twl4030 or whatever). OMAP has both * 1.8V and 3.0V modes, controlled by the PBIAS register. - * - * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which - * is most naturally TWL VSIM; those pins also use PBIAS. - * - * FIXME handle VMMC1A as needed ... */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK | + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -172,12 +168,6 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } - } else { - reg = omap4_ctrl_pad_readl(control_pbias_offset); - reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK); - omap4_ctrl_pad_writel(reg, control_pbias_offset); } } -- cgit v1.2.3 From c862dd706759c48a8a45af140330544724f170f9 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Mon, 3 Oct 2011 17:52:51 +0530 Subject: ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly Fix the typo, instead it should be SDMMC1 USBC1 is not related to MMC1 I/Os Signed-off-by: Balaji T K Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index d663649f6923..f4a1020559a7 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -479,7 +479,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); - reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| + reg |= (OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK | OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); omap4_ctrl_pad_writel(reg, control_mmc1); -- cgit v1.2.3 From fc01387302c01899e3cc67d3c81fd4287db9bab9 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 9 Jun 2011 16:56:23 +0300 Subject: ARM: OMAP: change get_context_loss_count ret value to int get_context_loss_count functions return context loss count as u32, and zero means an error. However, zero is also returned when context has never been lost and could also be returned when the context loss count has wrapped and goes to zero. Change the functions to return an int, with negative value meaning an error. OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the hsmmc code handles the returned value as an int, with negative value meaning an error, this patch actually fixes hsmmc code also. Signed-off-by: Tomi Valkeinen Acked-by: Kevin Hilman Acked-by: Paul Walmsley [tony@atomide.com: updated to fix a warning with recent dmtimer changes] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/powerdomain.c | 14 ++++++++++---- arch/arm/mach-omap2/powerdomain.h | 2 +- arch/arm/plat-omap/include/plat/dmtimer.h | 4 ++-- arch/arm/plat-omap/include/plat/omap-pm.h | 4 ++-- arch/arm/plat-omap/include/plat/omap_device.h | 2 +- arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 +- arch/arm/plat-omap/omap-pm-noop.c | 24 +++++++++++++++++------- arch/arm/plat-omap/omap_device.c | 2 +- 9 files changed, 36 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d71380705080..6b3088db83b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2625,7 +2625,7 @@ ohsps_unlock: * Returns the context loss count of the powerdomain assocated with @oh * upon success, or zero if no powerdomain exists for @oh. */ -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) { struct powerdomain *pwrdm; int ret = 0; diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 5164d587ef52..8a18d1bd61c8 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1002,16 +1002,16 @@ int pwrdm_post_transition(void) * @pwrdm: struct powerdomain * to wait for * * Context loss count is the sum of powerdomain off-mode counter, the - * logic off counter and the per-bank memory off counter. Returns 0 + * logic off counter and the per-bank memory off counter. Returns negative * (and WARNs) upon error, otherwise, returns the context loss count. */ -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm) +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm) { int i, count; if (!pwrdm) { WARN(1, "powerdomain: %s: pwrdm is null\n", __func__); - return 0; + return -ENODEV; } count = pwrdm->state_counter[PWRDM_POWER_OFF]; @@ -1020,7 +1020,13 @@ u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm) for (i = 0; i < pwrdm->banks; i++) count += pwrdm->ret_mem_off_counter[i]; - pr_debug("powerdomain: %s: context loss count = %u\n", + /* + * Context loss count has to be a non-negative value. Clear the sign + * bit to get a value range from 0 to INT_MAX. + */ + count &= INT_MAX; + + pr_debug("powerdomain: %s: context loss count = %d\n", pwrdm->name, count); return count; diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 42e6dd8f2a78..0d72a8a8ce4d 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -217,7 +217,7 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm); int pwrdm_pre_transition(void); int pwrdm_post_transition(void); int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm); +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); extern void omap242x_powerdomains_init(void); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index d11025e6e7a4..9418f00b6c38 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -104,7 +104,7 @@ struct dmtimer_platform_data { bool loses_context; - u32 (*get_context_loss_count)(struct device *dev); + int (*get_context_loss_count)(struct device *dev); }; struct omap_dm_timer *omap_dm_timer_request(void); @@ -279,7 +279,7 @@ struct omap_dm_timer { struct platform_device *pdev; struct list_head node; - u32 (*get_context_loss_count)(struct device *dev); + int (*get_context_loss_count)(struct device *dev); }; int omap_dm_timer_prepare(struct omap_dm_timer *timer); diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 0840df813f4f..67faa7b8fe92 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -342,9 +342,9 @@ unsigned long omap_pm_cpu_get_freq(void); * driver must restore device context. If the number of context losses * exceeds the maximum positive integer, the function will wrap to 0 and * continue counting. Returns the number of context losses for this device, - * or zero upon error. + * or negative value upon error. */ -u32 omap_pm_get_dev_context_loss_count(struct device *dev); +int omap_pm_get_dev_context_loss_count(struct device *dev); void omap_pm_enable_off_mode(void); void omap_pm_disable_off_mode(void); diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 12c5b0c345bf..51423d2727a5 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -107,7 +107,7 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name); int omap_device_align_pm_lat(struct platform_device *pdev, u32 new_wakeup_lat_limit); struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); -u32 omap_device_get_context_loss_count(struct platform_device *pdev); +int omap_device_get_context_loss_count(struct platform_device *pdev); /* Other */ diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 5419f1a2aaa4..8b372ede17c1 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -600,7 +600,7 @@ int omap_hwmod_for_each_by_class(const char *classname, void *user); int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index b0471bb2d47d..3dc3801aace4 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -27,7 +27,7 @@ #include static bool off_mode_enabled; -static u32 dummy_context_loss_counter; +static int dummy_context_loss_counter; /* * Device-driver-originated constraints (via board-*.c files) @@ -311,22 +311,32 @@ void omap_pm_disable_off_mode(void) #ifdef CONFIG_ARCH_OMAP2PLUS -u32 omap_pm_get_dev_context_loss_count(struct device *dev) +int omap_pm_get_dev_context_loss_count(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - u32 count; + int count; if (WARN_ON(!dev)) - return 0; + return -ENODEV; if (dev->parent == &omap_device_parent) { count = omap_device_get_context_loss_count(pdev); } else { WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", dev_name(dev)); - if (off_mode_enabled) - dummy_context_loss_counter++; + count = dummy_context_loss_counter; + + if (off_mode_enabled) { + count++; + /* + * Context loss count has to be a non-negative value. + * Clear the sign bit to get a value range from 0 to + * INT_MAX. + */ + count &= INT_MAX; + dummy_context_loss_counter = count; + } } pr_debug("OMAP PM: context loss count for dev %s = %d\n", @@ -337,7 +347,7 @@ u32 omap_pm_get_dev_context_loss_count(struct device *dev) #else -u32 omap_pm_get_dev_context_loss_count(struct device *dev) +int omap_pm_get_dev_context_loss_count(struct device *dev) { return dummy_context_loss_counter; } diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index cd90bedd9306..ef4ffc21bbae 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -426,7 +426,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb, * return the context loss counter for that hwmod, otherwise return * zero. */ -u32 omap_device_get_context_loss_count(struct platform_device *pdev) +int omap_device_get_context_loss_count(struct platform_device *pdev) { struct omap_device *od; u32 ret = 0; -- cgit v1.2.3 From 0eb3c0f5a43f7dd90c4109927752659f147237b7 Mon Sep 17 00:00:00 2001 From: Bjarne Steinsbo Date: Thu, 6 Oct 2011 13:03:46 -0700 Subject: ARM: OMAP: usb: musb: OMAP: Delete unused function Not in use anymore. Signed-off-by: Bjarne Steinsbo Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/usb-musb.c | 38 -------------------------------------- 1 file changed, 38 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 47fb5d607630..267975086a7b 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -60,44 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = { static u64 musb_dmamask = DMA_BIT_MASK(32); -static void usb_musb_mux_init(struct omap_musb_board_data *board_data) -{ - switch (board_data->interface_type) { - case MUSB_INTERFACE_UTMI: - omap_mux_init_signal("usba0_otg_dp", OMAP_PIN_INPUT); - omap_mux_init_signal("usba0_otg_dm", OMAP_PIN_INPUT); - break; - case MUSB_INTERFACE_ULPI: - omap_mux_init_signal("usba0_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_stp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - default: - break; - } -} - static struct omap_musb_board_data musb_default_board_data = { .interface_type = MUSB_INTERFACE_ULPI, .mode = MUSB_OTG, -- cgit v1.2.3 From e9614f35ba0f50d985fc27cbbafcb0346e1d4daa Mon Sep 17 00:00:00 2001 From: Thomas Weber Date: Tue, 6 Sep 2011 17:11:49 +0200 Subject: ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio Remove the init of card detect pin because omap_mux_init_gpio() is called during hsmmc initialization for the write protect and card detect pin. Signed-off-by: Thomas Weber Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-devkit8000.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 42918940c530..90154e411da0 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -226,7 +226,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, { int ret; - omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); -- cgit v1.2.3 From 2847111cb1ea1a6e2b25e6a26cc76f88575bc0bd Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 4 Oct 2011 23:20:40 +0200 Subject: ARM: OMAP2+: clock data: Remove redundant timer clkdev The commit 318c3e15cd55c73a26ae22a65a8183655b3003f9 added some "fck" clock alias to timer devices that are not needed anymore since hwmod framework will create them automatically. A warning was added to highlight and thus fix the redundancy. [ 0.616424] omap_timer.1: alias fck already exists [ 0.621948] omap_timer.2: alias fck already exists [ 0.627380] omap_timer.3: alias fck already exists [ 0.632781] omap_timer.4: alias fck already exists [ 0.638214] omap_timer.5: alias fck already exists [ 0.643615] omap_timer.6: alias fck already exists [ 0.649078] omap_timer.7: alias fck already exists [ 0.654479] omap_timer.8: alias fck already exists [ 0.659881] omap_timer.9: alias fck already exists [ 0.665283] omap_timer.10: alias fck already exists [ 0.670776] omap_timer.11: alias fck already exists Remove all the clkdev entries for timer fck alias. Signed-off-by: Benoit Cousson Cc: Tarun Kanti DebBarma Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock2420_data.c | 12 ------------ arch/arm/mach-omap2/clock2430_data.c | 12 ------------ arch/arm/mach-omap2/clock3xxx_data.c | 12 ------------ arch/arm/mach-omap2/clock44xx_data.c | 11 ----------- 4 files changed, 47 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 14a6277dd184..61ad3855f10a 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1898,18 +1898,6 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X), - CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X), - CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X), - CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X), - CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X), - CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X), - CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X), - CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X), - CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X), - CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X), - CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X), - CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X), CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index ea6717cfa3c8..0cc12879e7b9 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1998,18 +1998,6 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), - CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X), - CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X), - CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X), - CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X), - CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X), - CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X), - CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X), - CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X), - CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X), - CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X), - CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X), - CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X), CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 65dd363163bc..5d0064a4fb5a 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3464,18 +3464,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX), CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), - CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX), - CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX), - CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX), - CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX), - CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX), - CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX), - CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX), - CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX), - CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX), - CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX), - CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX), - CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX), CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX), CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX), CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index cbf9b68d4b94..0798a802497a 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3377,17 +3377,6 @@ static struct omap_clk omap44xx_clks[] = { CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK("omap_timer.1", "fck", &timer1_fck, CK_443X), - CLK("omap_timer.2", "fck", &timer2_fck, CK_443X), - CLK("omap_timer.3", "fck", &timer3_fck, CK_443X), - CLK("omap_timer.4", "fck", &timer4_fck, CK_443X), - CLK("omap_timer.5", "fck", &timer5_fck, CK_443X), - CLK("omap_timer.6", "fck", &timer6_fck, CK_443X), - CLK("omap_timer.7", "fck", &timer7_fck, CK_443X), - CLK("omap_timer.8", "fck", &timer8_fck, CK_443X), - CLK("omap_timer.9", "fck", &timer9_fck, CK_443X), - CLK("omap_timer.10", "fck", &timer10_fck, CK_443X), - CLK("omap_timer.11", "fck", &timer11_fck, CK_443X), CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X), -- cgit v1.2.3 From c16ae1e64e292054bc4c5a20724b40217bdc43dd Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Tue, 4 Oct 2011 23:20:41 +0200 Subject: ARM: OMAP2+: timer: Remove omap_device_pm_latency Remove the structure since a default one is now available. Signed-off-by: Benoit Cousson Cc: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e49fc7be2229..037b0d7d4e05 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -408,14 +408,6 @@ static int omap2_dm_timer_set_src(struct platform_device *pdev, int source) return ret; } -struct omap_device_pm_latency omap2_dmtimer_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - /** * omap_timer_init - build and register timer device with an * associated timer hwmod @@ -477,9 +469,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; #endif pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), - omap2_dmtimer_latency, - ARRAY_SIZE(omap2_dmtimer_latency), - 0); + NULL, 0, 0); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s: %s.\n", -- cgit v1.2.3 From be26a008414414c69a4ae9fe9877401c3ba62c5a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 6 Oct 2011 17:05:51 -0700 Subject: ARM: OMAP1: Fix warnings about enabling 32 KiHz timer Fix "Enable 32kHz OS timer in order to allow sleep states in idle" warning. We are now compiling in bothe MPU timer and 32 KiHz timer, so this warning is only valid when MPU_TIMER is set and OMAP_DM_TIMER is not set. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 495b3987d461..89ea20ca0ccc 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -116,7 +116,7 @@ void omap1_pm_idle(void) return; } -#ifdef CONFIG_OMAP_MPU_TIMER +#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); #else -- cgit v1.2.3 From 98e541ffaadf01fc4d202ad2bd187a14b671f1a4 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 4 Nov 2011 13:28:04 +0200 Subject: ARM: OMAP1: Remove unused omap-alsa.h There is no use for omap-alsa.h and board-palmz71.c doesn't need it either. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-palmz71.c | 1 - arch/arm/plat-omap/include/plat/omap-alsa.h | 123 ---------------------------- 2 files changed, 124 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/omap-alsa.h (limited to 'arch') diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c6fe61dfe856..42061573e380 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -42,7 +42,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/plat-omap/include/plat/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h deleted file mode 100644 index b53055b390d0..000000000000 --- a/arch/arm/plat-omap/include/plat/omap-alsa.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/omap-alsa.h - * - * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards. - * - * Copyright (C) 2006 Mika Laitio - * - * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil - * Written by Daniel Petrini, David Cohen, Anderson Briglia - * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History - * ------- - * - * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk, - * original version based in sa1100 driver - * and omap oss driver. - */ - -#ifndef __OMAP_ALSA_H -#define __OMAP_ALSA_H - -#include -#include -#include -#include -#include - -#define DMA_BUF_SIZE (1024 * 8) - -/* - * Buffer management for alsa and dma - */ -struct audio_stream { - char *id; /* identification string */ - int stream_id; /* numeric identification */ - int dma_dev; /* dma number of that device */ - int *lch; /* Chain of channels this stream is linked to */ - char started; /* to store if the chain was started or not */ - int dma_q_head; /* DMA Channel Q Head */ - int dma_q_tail; /* DMA Channel Q Tail */ - char dma_q_count; /* DMA Channel Q Count */ - int active:1; /* we are using this stream for transfer now */ - int period; /* current transfer period */ - int periods; /* current count of periods registerd in the DMA engine */ - spinlock_t dma_lock; /* for locking in DMA operations */ - struct snd_pcm_substream *stream; /* the pcm stream */ - unsigned linked:1; /* dma channels linked */ - int offset; /* store start position of the last period in the alsa buffer */ - int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */ - int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */ -}; - -/* - * Alsa card structure for aic23 - */ -struct snd_card_omap_codec { - struct snd_card *card; - struct snd_pcm *pcm; - long samplerate; - struct audio_stream s[2]; /* playback & capture */ -}; - -/* Codec specific information and function pointers. - * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c) - * are responsible for defining the function pointers. - */ -struct omap_alsa_codec_config { - char *name; - struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa; - struct snd_pcm_hw_constraint_list *hw_constraints_rates; - struct snd_pcm_hardware *snd_omap_alsa_playback; - struct snd_pcm_hardware *snd_omap_alsa_capture; - void (*codec_configure_dev)(void); - void (*codec_set_samplerate)(long); - void (*codec_clock_setup)(void); - int (*codec_clock_on)(void); - int (*codec_clock_off)(void); - int (*get_default_samplerate)(void); -}; - -/*********** Mixer function prototypes *************************/ -int snd_omap_mixer(struct snd_card_omap_codec *); -void snd_omap_init_mixer(void); - -#ifdef CONFIG_PM -void snd_omap_suspend_mixer(void); -void snd_omap_resume_mixer(void); -#endif - -int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config); -int snd_omap_alsa_remove(struct platform_device *pdev); -#ifdef CONFIG_PM -int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state); -int snd_omap_alsa_resume(struct platform_device *pdev); -#else -#define snd_omap_alsa_suspend NULL -#define snd_omap_alsa_resume NULL -#endif - -void callback_omap_alsa_sound_dma(void *); - -#endif -- cgit v1.2.3 From 41eb2d813f558900884e240c2f723e36c7bd151f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 6 Oct 2011 15:43:00 -0700 Subject: ARM: OMAP2: Fix H4 matrix keyboard warning Convert to use matrix keyboard to remove the warning "Please update the board to use matrix-keypad driver". Based on similar setup in palmtc.c. Note that this patch is compile tested only because of lack of working hardware. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-h4.c | 122 +++++++++++++++++++++++------------------ 1 file changed, 69 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index c12666ee7017..8b351d92a1cc 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -34,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -50,10 +50,8 @@ #define H4_ETHR_GPIO_IRQ 92 -static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; -static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; - -static const unsigned int h4_keymap[] = { +#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) +static const uint32_t board_matrix_keys[] = { KEY(0, 0, KEY_LEFT), KEY(1, 0, KEY_RIGHT), KEY(2, 0, KEY_A), @@ -86,6 +84,71 @@ static const unsigned int h4_keymap[] = { KEY(4, 5, KEY_ENTER), }; +static const struct matrix_keymap_data board_keymap_data = { + .keymap = board_matrix_keys, + .keymap_size = ARRAY_SIZE(board_matrix_keys), +}; + +static unsigned int board_keypad_row_gpios[] = { + 88, 89, 124, 11, 6, 96 +}; + +static unsigned int board_keypad_col_gpios[] = { + 90, 91, 100, 36, 12, 97, 98 +}; + +static struct matrix_keypad_platform_data board_keypad_platform_data = { + .keymap_data = &board_keymap_data, + .row_gpios = board_keypad_row_gpios, + .num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios), + .col_gpios = board_keypad_col_gpios, + .num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios), + .active_low = 1, + + .debounce_ms = 20, + .col_scan_delay_us = 5, +}; + +static struct platform_device board_keyboard = { + .name = "matrix-keypad", + .id = -1, + .dev = { + .platform_data = &board_keypad_platform_data, + }, +}; +static void __init board_mkp_init(void) +{ + omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); + if (omap_has_menelaus()) { + omap_mux_init_signal("sdrc_a14.gpio0", + OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("vlynq_rx0.gpio_15", 0); + omap_mux_init_signal("gpio_98", 0); + board_keypad_row_gpios[5] = 0; + board_keypad_col_gpios[2] = 15; + board_keypad_col_gpios[6] = 18; + } else { + omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("gpio_100", 0); + omap_mux_init_signal("gpio_98", 0); + } + omap_mux_init_signal("gpio_90", 0); + omap_mux_init_signal("gpio_91", 0); + omap_mux_init_signal("gpio_36", 0); + omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); + omap_mux_init_signal("gpio_97", 0); + + platform_device_register(&board_keyboard); +} +#else +static inline void board_mkp_init(void) +{ +} +#endif + static struct mtd_partition h4_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -137,31 +200,8 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -static const struct matrix_keymap_data h4_keymap_data = { - .keymap = h4_keymap, - .keymap_size = ARRAY_SIZE(h4_keymap), -}; - -static struct omap_kp_platform_data h4_kp_data = { - .rows = 6, - .cols = 7, - .keymap_data = &h4_keymap_data, - .rep = true, - .row_gpios = row_gpios, - .col_gpios = col_gpios, -}; - -static struct platform_device h4_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &h4_kp_data, - }, -}; - static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_kp_device, }; static struct panel_generic_dpi_data h4_panel_data = { @@ -336,31 +376,7 @@ static void __init omap_h4_init(void) * if not needed. */ -#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) - omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - if (omap_has_menelaus()) { - omap_mux_init_signal("sdrc_a14.gpio0", - OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - omap_mux_init_signal("gpio_98", 0); - row_gpios[5] = 0; - col_gpios[2] = 15; - col_gpios[6] = 18; - } else { - omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("gpio_100", 0); - omap_mux_init_signal("gpio_98", 0); - } - omap_mux_init_signal("gpio_90", 0); - omap_mux_init_signal("gpio_91", 0); - omap_mux_init_signal("gpio_36", 0); - omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - omap_mux_init_signal("gpio_97", 0); -#endif - + board_mkp_init(); i2c_register_board_info(1, h4_i2c_board_info, ARRAY_SIZE(h4_i2c_board_info)); -- cgit v1.2.3 From 22f4521d664030e417f41953e922f61c65f2e189 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 12 Aug 2011 00:13:47 -0400 Subject: mrst pmu: update comment referenced MeeGo, in particular, but really means Linux, in general. Signed-off-by: Len Brown --- arch/x86/platform/mrst/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c index 9281da7d91bd..c0ac06da57ac 100644 --- a/arch/x86/platform/mrst/pmu.c +++ b/arch/x86/platform/mrst/pmu.c @@ -70,7 +70,7 @@ static struct mrst_device mrst_devs[] = { /* 24 */ { 0x4110, 0 }, /* Lincroft */ }; -/* n.b. We ignore PCI-id 0x815 in LSS9 b/c MeeGo has no driver for it */ +/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */ static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0}; static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803, 0x0804, 0x0805, 0x080f, 0}; -- cgit v1.2.3 From e978aa7d7d57d04eb5f88a7507c4fb98577def77 Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:09 +0530 Subject: cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/arm/mach-at91/cpuidle.c | 10 +++-- arch/arm/mach-davinci/cpuidle.c | 9 +++-- arch/arm/mach-exynos4/cpuidle.c | 7 ++-- arch/arm/mach-kirkwood/cpuidle.c | 12 ++++-- arch/arm/mach-omap2/cpuidle34xx.c | 67 ++++++++++++++++++------------- arch/sh/kernel/cpu/shmobile/cpuidle.c | 12 +++--- drivers/acpi/processor_idle.c | 75 +++++++++++++++++++++++------------ drivers/cpuidle/cpuidle.c | 32 +++++++-------- drivers/cpuidle/governors/ladder.c | 13 ++++++ drivers/cpuidle/governors/menu.c | 7 +++- drivers/idle/intel_idle.c | 12 ++++-- include/linux/cpuidle.h | 7 ++-- 12 files changed, 164 insertions(+), 99 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 1cfeac1483d6..4696a0d61e2e 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -33,7 +33,7 @@ static struct cpuidle_driver at91_idle_driver = { /* Actual code that puts the SoC in different idle states */ static int at91_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { struct timeval before, after; int idle_time; @@ -41,10 +41,10 @@ static int at91_enter_idle(struct cpuidle_device *dev, local_irq_disable(); do_gettimeofday(&before); - if (state == &dev->states[0]) + if (index == 0) /* Wait for interrupt state */ cpu_do_idle(); - else if (state == &dev->states[1]) { + else if (index == 1) { asm("b 1f; .align 5; 1:"); asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ saved_lpr = sdram_selfrefresh_enable(); @@ -55,7 +55,9 @@ static int at91_enter_idle(struct cpuidle_device *dev, local_irq_enable(); idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + (after.tv_usec - before.tv_usec); - return idle_time; + + dev->last_residency = idle_time; + return index; } /* Initialize CPU idle by registering the idle states */ diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index bd59f31b8a95..ca8582a95ad9 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -78,9 +78,9 @@ static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { /* Actual code that puts the SoC in different idle states */ static int davinci_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { - struct davinci_ops *ops = cpuidle_get_statedata(state); + struct davinci_ops *ops = cpuidle_get_statedata(&dev->states[index]); struct timeval before, after; int idle_time; @@ -98,7 +98,10 @@ static int davinci_enter_idle(struct cpuidle_device *dev, local_irq_enable(); idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + (after.tv_usec - before.tv_usec); - return idle_time; + + dev->last_residency = idle_time; + + return index; } static int __init davinci_cpuidle_probe(struct platform_device *pdev) diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c index bf7e96f2793a..ea026e72b977 100644 --- a/arch/arm/mach-exynos4/cpuidle.c +++ b/arch/arm/mach-exynos4/cpuidle.c @@ -16,7 +16,7 @@ #include static int exynos4_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state); + int index); static struct cpuidle_state exynos4_cpuidle_set[] = { [0] = { @@ -37,7 +37,7 @@ static struct cpuidle_driver exynos4_idle_driver = { }; static int exynos4_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { struct timeval before, after; int idle_time; @@ -52,7 +52,8 @@ static int exynos4_enter_idle(struct cpuidle_device *dev, idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + (after.tv_usec - before.tv_usec); - return idle_time; + dev->last_residency = idle_time; + return index; } static int __init exynos4_init_cpuidle(void) diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index f68d33f1f396..358dd80b3a07 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -32,17 +32,17 @@ static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); /* Actual code that puts the SoC in different idle states */ static int kirkwood_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { struct timeval before, after; int idle_time; local_irq_disable(); do_gettimeofday(&before); - if (state == &dev->states[0]) + if (index == 0) /* Wait for interrupt state */ cpu_do_idle(); - else if (state == &dev->states[1]) { + else if (index == 1) { /* * Following write will put DDR in self refresh. * Note that we have 256 cycles before DDR puts it @@ -57,7 +57,11 @@ static int kirkwood_enter_idle(struct cpuidle_device *dev, local_irq_enable(); idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + (after.tv_usec - before.tv_usec); - return idle_time; + + /* Update last residency */ + dev->last_residency = idle_time; + + return index; } /* Initialize CPU idle by registering the idle states */ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 4bf6e6e8b100..58425c75f1b8 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -88,17 +88,19 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, /** * omap3_enter_idle - Programs OMAP3 to enter the specified state * @dev: cpuidle device - * @state: The target state to be programmed + * @index: the index of state to be entered * * Called from the CPUidle framework to program the device to the * specified target state selected by the governor. */ static int omap3_enter_idle(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { - struct omap3_idle_statedata *cx = cpuidle_get_statedata(state); + struct omap3_idle_statedata *cx = + cpuidle_get_statedata(&dev->states[index]); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; + int idle_time; /* Used to keep track of the total time in idle */ getnstimeofday(&ts_preidle); @@ -113,7 +115,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, goto return_sleep_time; /* Deny idle for C1 */ - if (state == &dev->states[0]) { + if (index == 0) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); } @@ -122,7 +124,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, omap_sram_idle(); /* Re-allow idle for C1 */ - if (state == &dev->states[0]) { + if (index == 0) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); } @@ -134,28 +136,35 @@ return_sleep_time: local_irq_enable(); local_fiq_enable(); - return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC; + idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \ + USEC_PER_SEC; + + /* Update cpuidle counters */ + dev->last_residency = idle_time; + + return index; } /** * next_valid_state - Find next valid C-state * @dev: cpuidle device - * @state: Currently selected C-state + * @index: Index of currently selected c-state * - * If the current state is valid, it is returned back to the caller. - * Else, this function searches for a lower c-state which is still - * valid. + * If the state corresponding to index is valid, index is returned back + * to the caller. Else, this function searches for a lower c-state which is + * still valid (as defined in omap3_power_states[]) and returns its index. * * A state is valid if the 'valid' field is enabled and * if it satisfies the enable_off_mode condition. */ -static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, - struct cpuidle_state *curr) +static int next_valid_state(struct cpuidle_device *dev, + int index) { - struct cpuidle_state *next = NULL; + struct cpuidle_state *curr = &dev->states[index]; struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; + int next_index = -1; if (enable_off_mode) { mpu_deepest_state = PWRDM_POWER_OFF; @@ -172,20 +181,20 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, if ((cx->valid) && (cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { - return curr; + return index; } else { int idx = OMAP3_NUM_STATES - 1; /* Reach the current state starting at highest C-state */ for (; idx >= 0; idx--) { if (&dev->states[idx] == curr) { - next = &dev->states[idx]; + next_index = idx; break; } } /* Should never hit this condition */ - WARN_ON(next == NULL); + WARN_ON(next_index == -1); /* * Drop to next valid state. @@ -197,37 +206,39 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, if ((cx->valid) && (cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { - next = &dev->states[idx]; + next_index = idx; break; } } /* * C1 is always valid. - * So, no need to check for 'next==NULL' outside this loop. + * So, no need to check for 'next_index == -1' outside + * this loop. */ } - return next; + return next_index; } /** * omap3_enter_idle_bm - Checks for any bus activity * @dev: cpuidle device - * @state: The target state to be programmed + * @index: array index of target state to be programmed * * This function checks for any pending activity and then programs * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { - struct cpuidle_state *new_state; + struct cpuidle_state *state = &dev->states[index]; + int new_state_idx; u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; struct omap3_idle_statedata *cx; int ret; if (!omap3_can_sleep()) { - new_state = dev->safe_state; + new_state_idx = dev->safe_state_index; goto select_state; } @@ -237,7 +248,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, */ cam_state = pwrdm_read_pwrst(cam_pd); if (cam_state == PWRDM_POWER_ON) { - new_state = dev->safe_state; + new_state_idx = dev->safe_state_index; goto select_state; } @@ -264,11 +275,10 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); - new_state = next_valid_state(dev, state); + new_state_idx = next_valid_state(dev, index); select_state: - dev->last_state = new_state; - ret = omap3_enter_idle(dev, new_state); + ret = omap3_enter_idle(dev, new_state_idx); /* Restore original PER state if it was modified */ if (per_next_state != per_saved_state) @@ -339,11 +349,12 @@ int __init omap3_idle_init(void) cpuidle_register_driver(&omap3_idle_driver); dev = &per_cpu(omap3_idle_dev, smp_processor_id()); + dev->safe_state_index = -1; /* C1 . MPU WFI + Core active */ cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); (&dev->states[0])->enter = omap3_enter_idle; - dev->safe_state = &dev->states[0]; + dev->safe_state_index = 0; cx->valid = 1; /* C1 is always valid */ cx->mpu_state = PWRDM_POWER_ON; cx->core_state = PWRDM_POWER_ON; diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c index e4469e7233cb..7be50d4c4268 100644 --- a/arch/sh/kernel/cpu/shmobile/cpuidle.c +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -25,11 +25,11 @@ static unsigned long cpuidle_mode[] = { }; static int cpuidle_sleep_enter(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { unsigned long allowed_mode = arch_hwblk_sleep_mode(); ktime_t before, after; - int requested_state = state - &dev->states[0]; + int requested_state = index; int allowed_state; int k; @@ -46,11 +46,13 @@ static int cpuidle_sleep_enter(struct cpuidle_device *dev, */ k = min_t(int, allowed_state, requested_state); - dev->last_state = &dev->states[k]; before = ktime_get(); sh_mobile_call_standby(cpuidle_mode[k]); after = ktime_get(); - return ktime_to_ns(ktime_sub(after, before)) >> 10; + + dev->last_residency = (int)ktime_to_ns(ktime_sub(after, before)) >> 10; + + return k; } static struct cpuidle_device cpuidle_dev; @@ -84,7 +86,7 @@ void sh_mobile_setup_cpuidle(void) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = cpuidle_sleep_enter; - dev->safe_state = state; + dev->safe_state_index = i-1; if (sh_mobile_sleep_supported & SUSP_SH_SF) { state = &dev->states[i++]; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 431ab11c8c1b..9cd08cecb347 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -741,22 +741,24 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) /** * acpi_idle_enter_c1 - enters an ACPI C1 state-type * @dev: the target CPU - * @state: the state data + * @index: index of target state * * This is equivalent to the HALT instruction. */ static int acpi_idle_enter_c1(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { ktime_t kt1, kt2; s64 idle_time; struct acpi_processor *pr; + struct cpuidle_state *state = &dev->states[index]; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); pr = __this_cpu_read(processors); + dev->last_residency = 0; if (unlikely(!pr)) - return 0; + return -EINVAL; local_irq_disable(); @@ -764,7 +766,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, if (acpi_idle_suspend) { local_irq_enable(); cpu_relax(); - return 0; + return -EINVAL; } lapic_timer_state_broadcast(pr, cx, 1); @@ -773,37 +775,46 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, kt2 = ktime_get_real(); idle_time = ktime_to_us(ktime_sub(kt2, kt1)); + /* Update device last_residency*/ + dev->last_residency = (int)idle_time; + local_irq_enable(); cx->usage++; lapic_timer_state_broadcast(pr, cx, 0); - return idle_time; + return index; } /** * acpi_idle_enter_simple - enters an ACPI state without BM handling * @dev: the target CPU - * @state: the state data + * @index: the index of suggested state */ static int acpi_idle_enter_simple(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { struct acpi_processor *pr; + struct cpuidle_state *state = &dev->states[index]; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); ktime_t kt1, kt2; s64 idle_time_ns; s64 idle_time; pr = __this_cpu_read(processors); + dev->last_residency = 0; if (unlikely(!pr)) - return 0; - - if (acpi_idle_suspend) - return(acpi_idle_enter_c1(dev, state)); + return -EINVAL; local_irq_disable(); + if (acpi_idle_suspend) { + local_irq_enable(); + cpu_relax(); + return -EINVAL; + } + + if (cx->entry_method != ACPI_CSTATE_FFH) { current_thread_info()->status &= ~TS_POLLING; /* @@ -815,7 +826,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING; local_irq_enable(); - return 0; + return -EINVAL; } } @@ -837,6 +848,9 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, idle_time = idle_time_ns; do_div(idle_time, NSEC_PER_USEC); + /* Update device last_residency*/ + dev->last_residency = (int)idle_time; + /* Tell the scheduler how much we idled: */ sched_clock_idle_wakeup_event(idle_time_ns); @@ -848,7 +862,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, lapic_timer_state_broadcast(pr, cx, 0); cx->time += idle_time; - return idle_time; + return index; } static int c3_cpu_count; @@ -857,14 +871,15 @@ static DEFINE_SPINLOCK(c3_lock); /** * acpi_idle_enter_bm - enters C3 with proper BM handling * @dev: the target CPU - * @state: the state data + * @index: the index of suggested state * * If BM is detected, the deepest non-C3 idle state is entered instead. */ static int acpi_idle_enter_bm(struct cpuidle_device *dev, - struct cpuidle_state *state) + int index) { struct acpi_processor *pr; + struct cpuidle_state *state = &dev->states[index]; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); ktime_t kt1, kt2; s64 idle_time_ns; @@ -872,22 +887,26 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, pr = __this_cpu_read(processors); + dev->last_residency = 0; if (unlikely(!pr)) - return 0; + return -EINVAL; - if (acpi_idle_suspend) - return(acpi_idle_enter_c1(dev, state)); + + if (acpi_idle_suspend) { + cpu_relax(); + return -EINVAL; + } if (!cx->bm_sts_skip && acpi_idle_bm_check()) { - if (dev->safe_state) { - dev->last_state = dev->safe_state; - return dev->safe_state->enter(dev, dev->safe_state); + if (dev->safe_state_index >= 0) { + return dev->states[dev->safe_state_index].enter(dev, + dev->safe_state_index); } else { local_irq_disable(); acpi_safe_halt(); local_irq_enable(); - return 0; + return -EINVAL; } } @@ -904,7 +923,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (unlikely(need_resched())) { current_thread_info()->status |= TS_POLLING; local_irq_enable(); - return 0; + return -EINVAL; } } @@ -954,6 +973,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, idle_time = idle_time_ns; do_div(idle_time, NSEC_PER_USEC); + /* Update device last_residency*/ + dev->last_residency = (int)idle_time; + /* Tell the scheduler how much we idled: */ sched_clock_idle_wakeup_event(idle_time_ns); @@ -965,7 +987,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, lapic_timer_state_broadcast(pr, cx, 0); cx->time += idle_time; - return idle_time; + return index; } struct cpuidle_driver acpi_idle_driver = { @@ -992,6 +1014,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) } dev->cpu = pr->id; + dev->safe_state_index = -1; for (i = 0; i < CPUIDLE_STATE_MAX; i++) { dev->states[i].name[0] = '\0'; dev->states[i].desc[0] = '\0'; @@ -1027,13 +1050,13 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_c1; - dev->safe_state = state; + dev->safe_state_index = count; break; case ACPI_STATE_C2: state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; - dev->safe_state = state; + dev->safe_state_index = count; break; case ACPI_STATE_C3: diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index d4c542372886..88bd12104396 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -62,7 +62,7 @@ int cpuidle_idle_call(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); struct cpuidle_state *target_state; - int next_state; + int next_state, entered_state; if (off) return -ENODEV; @@ -102,26 +102,27 @@ int cpuidle_idle_call(void) target_state = &dev->states[next_state]; - /* enter the state and update stats */ - dev->last_state = target_state; - trace_power_start(POWER_CSTATE, next_state, dev->cpu); trace_cpu_idle(next_state, dev->cpu); - dev->last_residency = target_state->enter(dev, target_state); + entered_state = target_state->enter(dev, next_state); trace_power_end(dev->cpu); trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu); - if (dev->last_state) - target_state = dev->last_state; - - target_state->time += (unsigned long long)dev->last_residency; - target_state->usage++; + if (entered_state >= 0) { + /* Update cpuidle counters */ + /* This can be moved to within driver enter routine + * but that results in multiple copies of same code. + */ + dev->states[entered_state].time += + (unsigned long long)dev->last_residency; + dev->states[entered_state].usage++; + } /* give the governor an opportunity to reflect on the outcome */ if (cpuidle_curr_governor->reflect) - cpuidle_curr_governor->reflect(dev); + cpuidle_curr_governor->reflect(dev, entered_state); return 0; } @@ -172,11 +173,10 @@ void cpuidle_resume_and_unlock(void) EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); #ifdef CONFIG_ARCH_HAS_CPU_RELAX -static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st) +static int poll_idle(struct cpuidle_device *dev, int index) { ktime_t t1, t2; s64 diff; - int ret; t1 = ktime_get(); local_irq_enable(); @@ -188,8 +188,9 @@ static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st) if (diff > INT_MAX) diff = INT_MAX; - ret = (int) diff; - return ret; + dev->last_residency = (int) diff; + + return index; } static void poll_idle_init(struct cpuidle_device *dev) @@ -248,7 +249,6 @@ int cpuidle_enable_device(struct cpuidle_device *dev) dev->states[i].time = 0; } dev->last_residency = 0; - dev->last_state = NULL; smp_wmb(); diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c index 12c98900dcf8..6a686a76711f 100644 --- a/drivers/cpuidle/governors/ladder.c +++ b/drivers/cpuidle/governors/ladder.c @@ -153,11 +153,24 @@ static int ladder_enable_device(struct cpuidle_device *dev) return 0; } +/** + * ladder_reflect - update the correct last_state_idx + * @dev: the CPU + * @index: the index of actual state entered + */ +static void ladder_reflect(struct cpuidle_device *dev, int index) +{ + struct ladder_device *ldev = &__get_cpu_var(ladder_devices); + if (index > 0) + ldev->last_state_idx = index; +} + static struct cpuidle_governor ladder_governor = { .name = "ladder", .rating = 10, .enable = ladder_enable_device, .select = ladder_select_state, + .reflect = ladder_reflect, .owner = THIS_MODULE, }; diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index c47f3d09c1ee..e4b200c5b441 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -310,14 +310,17 @@ static int menu_select(struct cpuidle_device *dev) /** * menu_reflect - records that data structures need update * @dev: the CPU + * @index: the index of actual entered state * * NOTE: it's important to be fast here because this operation will add to * the overall exit latency. */ -static void menu_reflect(struct cpuidle_device *dev) +static void menu_reflect(struct cpuidle_device *dev, int index) { struct menu_device *data = &__get_cpu_var(menu_devices); - data->needs_update = 1; + data->last_state_idx = index; + if (index >= 0) + data->needs_update = 1; } /** diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index a46dddf61078..a1c888d2216a 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -81,7 +81,7 @@ static unsigned int mwait_substates; static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */ static struct cpuidle_device __percpu *intel_idle_cpuidle_devices; -static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state); +static int intel_idle(struct cpuidle_device *dev, int index); static struct cpuidle_state *cpuidle_state_table; @@ -209,12 +209,13 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { /** * intel_idle * @dev: cpuidle_device - * @state: cpuidle state + * @index: index of cpuidle state * */ -static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state) +static int intel_idle(struct cpuidle_device *dev, int index) { unsigned long ecx = 1; /* break on interrupt flag */ + struct cpuidle_state *state = &dev->states[index]; unsigned long eax = (unsigned long)cpuidle_get_statedata(state); unsigned int cstate; ktime_t kt_before, kt_after; @@ -256,7 +257,10 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state) if (!(lapic_timer_reliable_states & (1 << (cstate)))) clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); - return usec_delta; + /* Update cpuidle counters */ + dev->last_residency = (int)usec_delta; + + return index; } static void __setup_broadcast_timer(void *arg) diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index b51629e15cfc..8da811bcdbdb 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -42,7 +42,7 @@ struct cpuidle_state { unsigned long long time; /* in US */ int (*enter) (struct cpuidle_device *dev, - struct cpuidle_state *state); + int index); }; /* Idle State Flags */ @@ -87,13 +87,12 @@ struct cpuidle_device { int state_count; struct cpuidle_state states[CPUIDLE_STATE_MAX]; struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX]; - struct cpuidle_state *last_state; struct list_head device_list; struct kobject kobj; struct completion kobj_unregister; void *governor_data; - struct cpuidle_state *safe_state; + int safe_state_index; int (*prepare) (struct cpuidle_device *dev); }; @@ -169,7 +168,7 @@ struct cpuidle_governor { void (*disable) (struct cpuidle_device *dev); int (*select) (struct cpuidle_device *dev); - void (*reflect) (struct cpuidle_device *dev); + void (*reflect) (struct cpuidle_device *dev, int index); struct module *owner; }; -- cgit v1.2.3 From 4202735e8ab6ecfb0381631a0d0b58fefe0bd4e2 Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:33 +0530 Subject: cpuidle: Split cpuidle_state structure and move per-cpu statistics fields This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/arm/mach-davinci/cpuidle.c | 5 +++-- arch/arm/mach-omap2/cpuidle34xx.c | 13 ++++++----- drivers/acpi/processor_idle.c | 25 ++++++++++----------- drivers/cpuidle/cpuidle.c | 11 +++++----- drivers/cpuidle/sysfs.c | 19 +++++++++++----- drivers/idle/intel_idle.c | 46 +++++++++++++++++++++++++++++---------- include/linux/cpuidle.h | 25 ++++++++++++--------- 7 files changed, 90 insertions(+), 54 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index ca8582a95ad9..f2d2f34603d9 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -80,7 +80,8 @@ static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { static int davinci_enter_idle(struct cpuidle_device *dev, int index) { - struct davinci_ops *ops = cpuidle_get_statedata(&dev->states[index]); + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct davinci_ops *ops = cpuidle_get_statedata(state_usage); struct timeval before, after; int idle_time; @@ -142,7 +143,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); if (pdata->ddr2_pdown) davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; - cpuidle_set_statedata(&device->states[1], &davinci_states[1]); + cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]); device->state_count = DAVINCI_CPUIDLE_MAX_STATES; diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 58425c75f1b8..d3fce7b97fcf 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -97,7 +97,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev, int index) { struct omap3_idle_statedata *cx = - cpuidle_get_statedata(&dev->states[index]); + cpuidle_get_statedata(&dev->states_usage[index]); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; int idle_time; @@ -160,8 +160,9 @@ return_sleep_time: static int next_valid_state(struct cpuidle_device *dev, int index) { + struct cpuidle_state_usage *curr_usage = &dev->states_usage[index]; struct cpuidle_state *curr = &dev->states[index]; - struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); + struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage); u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; int next_index = -1; @@ -202,7 +203,7 @@ static int next_valid_state(struct cpuidle_device *dev, */ idx--; for (; idx >= 0; idx--) { - cx = cpuidle_get_statedata(&dev->states[idx]); + cx = cpuidle_get_statedata(&dev->states_usage[idx]); if ((cx->valid) && (cx->mpu_state >= mpu_deepest_state) && (cx->core_state >= core_deepest_state)) { @@ -231,7 +232,6 @@ static int next_valid_state(struct cpuidle_device *dev, static int omap3_enter_idle_bm(struct cpuidle_device *dev, int index) { - struct cpuidle_state *state = &dev->states[index]; int new_state_idx; u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; struct omap3_idle_statedata *cx; @@ -264,7 +264,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ - cx = cpuidle_get_statedata(state); + cx = cpuidle_get_statedata(&dev->states_usage[index]); core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && @@ -318,6 +318,7 @@ static inline struct omap3_idle_statedata *_fill_cstate( { struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; struct cpuidle_state *state = &dev->states[idx]; + struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; state->exit_latency = cpuidle_params_table[idx].exit_latency; state->target_residency = cpuidle_params_table[idx].target_residency; @@ -326,7 +327,7 @@ static inline struct omap3_idle_statedata *_fill_cstate( cx->valid = cpuidle_params_table[idx].valid; sprintf(state->name, "C%d", idx + 1); strncpy(state->desc, descr, CPUIDLE_DESC_LEN); - cpuidle_set_statedata(state, cx); + cpuidle_set_statedata(state_usage, cx); return cx; } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 9cd08cecb347..b98c75285690 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -745,14 +745,13 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) * * This is equivalent to the HALT instruction. */ -static int acpi_idle_enter_c1(struct cpuidle_device *dev, - int index) +static int acpi_idle_enter_c1(struct cpuidle_device *dev, int index) { ktime_t kt1, kt2; s64 idle_time; struct acpi_processor *pr; - struct cpuidle_state *state = &dev->states[index]; - struct acpi_processor_cx *cx = cpuidle_get_statedata(state); + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage); pr = __this_cpu_read(processors); dev->last_residency = 0; @@ -790,12 +789,11 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, * @dev: the target CPU * @index: the index of suggested state */ -static int acpi_idle_enter_simple(struct cpuidle_device *dev, - int index) +static int acpi_idle_enter_simple(struct cpuidle_device *dev, int index) { struct acpi_processor *pr; - struct cpuidle_state *state = &dev->states[index]; - struct acpi_processor_cx *cx = cpuidle_get_statedata(state); + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage); ktime_t kt1, kt2; s64 idle_time_ns; s64 idle_time; @@ -875,12 +873,11 @@ static DEFINE_SPINLOCK(c3_lock); * * If BM is detected, the deepest non-C3 idle state is entered instead. */ -static int acpi_idle_enter_bm(struct cpuidle_device *dev, - int index) +static int acpi_idle_enter_bm(struct cpuidle_device *dev, int index) { struct acpi_processor *pr; - struct cpuidle_state *state = &dev->states[index]; - struct acpi_processor_cx *cx = cpuidle_get_statedata(state); + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + struct acpi_processor_cx *cx = cpuidle_get_statedata(state_usage); ktime_t kt1, kt2; s64 idle_time_ns; s64 idle_time; @@ -1004,6 +1001,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) int i, count = CPUIDLE_DRIVER_STATE_START; struct acpi_processor_cx *cx; struct cpuidle_state *state; + struct cpuidle_state_usage *state_usage; struct cpuidle_device *dev = &pr->power.dev; if (!pr->flags.power_setup_done) @@ -1026,6 +1024,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { cx = &pr->power.states[i]; state = &dev->states[count]; + state_usage = &dev->states_usage[count]; if (!cx->valid) continue; @@ -1036,7 +1035,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) continue; #endif - cpuidle_set_statedata(state, cx); + cpuidle_set_statedata(state_usage, cx); snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i); strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index f66bcf9bfe93..7127e92fa8a1 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -105,9 +105,9 @@ int cpuidle_idle_call(void) /* This can be moved to within driver enter routine * but that results in multiple copies of same code. */ - dev->states[entered_state].time += + dev->states_usage[entered_state].time += (unsigned long long)dev->last_residency; - dev->states[entered_state].usage++; + dev->states_usage[entered_state].usage++; } /* give the governor an opportunity to reflect on the outcome */ @@ -186,8 +186,9 @@ static int poll_idle(struct cpuidle_device *dev, int index) static void poll_idle_init(struct cpuidle_device *dev) { struct cpuidle_state *state = &dev->states[0]; + struct cpuidle_state_usage *state_usage = &dev->states_usage[0]; - cpuidle_set_statedata(state, NULL); + cpuidle_set_statedata(state_usage, NULL); snprintf(state->name, CPUIDLE_NAME_LEN, "POLL"); snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); @@ -235,8 +236,8 @@ int cpuidle_enable_device(struct cpuidle_device *dev) goto fail_sysfs; for (i = 0; i < dev->state_count; i++) { - dev->states[i].usage = 0; - dev->states[i].time = 0; + dev->states_usage[i].usage = 0; + dev->states_usage[i].time = 0; } dev->last_residency = 0; diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index be7917ec40c9..8a1ace104476 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -216,7 +216,8 @@ static struct kobj_type ktype_cpuidle = { struct cpuidle_state_attr { struct attribute attr; - ssize_t (*show)(struct cpuidle_state *, char *); + ssize_t (*show)(struct cpuidle_state *, \ + struct cpuidle_state_usage *, char *); ssize_t (*store)(struct cpuidle_state *, const char *, size_t); }; @@ -224,19 +225,22 @@ struct cpuidle_state_attr { static struct cpuidle_state_attr attr_##_name = __ATTR(_name, 0444, show, NULL) #define define_show_state_function(_name) \ -static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \ +static ssize_t show_state_##_name(struct cpuidle_state *state, \ + struct cpuidle_state_usage *state_usage, char *buf) \ { \ return sprintf(buf, "%u\n", state->_name);\ } #define define_show_state_ull_function(_name) \ -static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \ +static ssize_t show_state_##_name(struct cpuidle_state *state, \ + struct cpuidle_state_usage *state_usage, char *buf) \ { \ - return sprintf(buf, "%llu\n", state->_name);\ + return sprintf(buf, "%llu\n", state_usage->_name);\ } #define define_show_state_str_function(_name) \ -static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \ +static ssize_t show_state_##_name(struct cpuidle_state *state, \ + struct cpuidle_state_usage *state_usage, char *buf) \ { \ if (state->_name[0] == '\0')\ return sprintf(buf, "\n");\ @@ -269,16 +273,18 @@ static struct attribute *cpuidle_state_default_attrs[] = { #define kobj_to_state_obj(k) container_of(k, struct cpuidle_state_kobj, kobj) #define kobj_to_state(k) (kobj_to_state_obj(k)->state) +#define kobj_to_state_usage(k) (kobj_to_state_obj(k)->state_usage) #define attr_to_stateattr(a) container_of(a, struct cpuidle_state_attr, attr) static ssize_t cpuidle_state_show(struct kobject * kobj, struct attribute * attr ,char * buf) { int ret = -EIO; struct cpuidle_state *state = kobj_to_state(kobj); + struct cpuidle_state_usage *state_usage = kobj_to_state_usage(kobj); struct cpuidle_state_attr * cattr = attr_to_stateattr(attr); if (cattr->show) - ret = cattr->show(state, buf); + ret = cattr->show(state, state_usage, buf); return ret; } @@ -323,6 +329,7 @@ int cpuidle_add_state_sysfs(struct cpuidle_device *device) if (!kobj) goto error_state; kobj->state = &device->states[i]; + kobj->state_usage = &device->states_usage[i]; init_completion(&kobj->kobj_unregister); ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle, &device->kobj, diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index a1c888d2216a..3aa8d4cb6dca 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -109,7 +109,6 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C1 */ .name = "C1-NHM", .desc = "MWAIT 0x00", - .driver_data = (void *) 0x00, .flags = CPUIDLE_FLAG_TIME_VALID, .exit_latency = 3, .target_residency = 6, @@ -117,7 +116,6 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C2 */ .name = "C3-NHM", .desc = "MWAIT 0x10", - .driver_data = (void *) 0x10, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 20, .target_residency = 80, @@ -125,7 +123,6 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C3 */ .name = "C6-NHM", .desc = "MWAIT 0x20", - .driver_data = (void *) 0x20, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 200, .target_residency = 800, @@ -137,7 +134,6 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C1 */ .name = "C1-SNB", .desc = "MWAIT 0x00", - .driver_data = (void *) 0x00, .flags = CPUIDLE_FLAG_TIME_VALID, .exit_latency = 1, .target_residency = 1, @@ -145,7 +141,6 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C2 */ .name = "C3-SNB", .desc = "MWAIT 0x10", - .driver_data = (void *) 0x10, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 80, .target_residency = 211, @@ -153,7 +148,6 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C3 */ .name = "C6-SNB", .desc = "MWAIT 0x20", - .driver_data = (void *) 0x20, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 104, .target_residency = 345, @@ -161,7 +155,6 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C4 */ .name = "C7-SNB", .desc = "MWAIT 0x30", - .driver_data = (void *) 0x30, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 109, .target_residency = 345, @@ -173,7 +166,6 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C1 */ .name = "C1-ATM", .desc = "MWAIT 0x00", - .driver_data = (void *) 0x00, .flags = CPUIDLE_FLAG_TIME_VALID, .exit_latency = 1, .target_residency = 4, @@ -181,7 +173,6 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C2 */ .name = "C2-ATM", .desc = "MWAIT 0x10", - .driver_data = (void *) 0x10, .flags = CPUIDLE_FLAG_TIME_VALID, .exit_latency = 20, .target_residency = 80, @@ -190,7 +181,6 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C4 */ .name = "C4-ATM", .desc = "MWAIT 0x30", - .driver_data = (void *) 0x30, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 100, .target_residency = 400, @@ -199,13 +189,41 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C6 */ .name = "C6-ATM", .desc = "MWAIT 0x52", - .driver_data = (void *) 0x52, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 140, .target_residency = 560, .enter = &intel_idle }, }; +static int get_driver_data(int cstate) +{ + int driver_data; + switch (cstate) { + + case 1: /* MWAIT C1 */ + driver_data = 0x00; + break; + case 2: /* MWAIT C2 */ + driver_data = 0x10; + break; + case 3: /* MWAIT C3 */ + driver_data = 0x20; + break; + case 4: /* MWAIT C4 */ + driver_data = 0x30; + break; + case 5: /* MWAIT C5 */ + driver_data = 0x40; + break; + case 6: /* MWAIT C6 */ + driver_data = 0x52; + break; + default: + driver_data = 0x00; + } + return driver_data; +} + /** * intel_idle * @dev: cpuidle_device @@ -216,7 +234,8 @@ static int intel_idle(struct cpuidle_device *dev, int index) { unsigned long ecx = 1; /* break on interrupt flag */ struct cpuidle_state *state = &dev->states[index]; - unsigned long eax = (unsigned long)cpuidle_get_statedata(state); + struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; + unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage); unsigned int cstate; ktime_t kt_before, kt_after; s64 usec_delta; @@ -451,6 +470,9 @@ static int intel_idle_cpuidle_devices_init(void) dev->states[dev->state_count] = /* structure copy */ cpuidle_state_table[cstate]; + dev->states_usage[dev->state_count].driver_data = + (void *)get_driver_data(cstate); + dev->state_count += 1; } diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index c6d85cf90eb2..0156540b3f79 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -28,19 +28,22 @@ struct cpuidle_device; * CPUIDLE DEVICE INTERFACE * ****************************/ +struct cpuidle_state_usage { + void *driver_data; + + unsigned long long usage; + unsigned long long time; /* in US */ +}; + struct cpuidle_state { char name[CPUIDLE_NAME_LEN]; char desc[CPUIDLE_DESC_LEN]; - void *driver_data; unsigned int flags; unsigned int exit_latency; /* in US */ unsigned int power_usage; /* in mW */ unsigned int target_residency; /* in US */ - unsigned long long usage; - unsigned long long time; /* in US */ - int (*enter) (struct cpuidle_device *dev, int index); }; @@ -52,26 +55,27 @@ struct cpuidle_state { /** * cpuidle_get_statedata - retrieves private driver state data - * @state: the state + * @st_usage: the state usage statistics */ -static inline void * cpuidle_get_statedata(struct cpuidle_state *state) +static inline void *cpuidle_get_statedata(struct cpuidle_state_usage *st_usage) { - return state->driver_data; + return st_usage->driver_data; } /** * cpuidle_set_statedata - stores private driver state data - * @state: the state + * @st_usage: the state usage statistics * @data: the private data */ static inline void -cpuidle_set_statedata(struct cpuidle_state *state, void *data) +cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data) { - state->driver_data = data; + st_usage->driver_data = data; } struct cpuidle_state_kobj { struct cpuidle_state *state; + struct cpuidle_state_usage *state_usage; struct completion kobj_unregister; struct kobject kobj; }; @@ -85,6 +89,7 @@ struct cpuidle_device { int last_residency; int state_count; struct cpuidle_state states[CPUIDLE_STATE_MAX]; + struct cpuidle_state_usage states_usage[CPUIDLE_STATE_MAX]; struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX]; struct list_head device_list; -- cgit v1.2.3 From 46bcfad7a819bd17ac4e831b04405152d59784ab Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Fri, 28 Oct 2011 16:20:42 +0530 Subject: cpuidle: Single/Global registration of idle states This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar Signed-off-by: Trinabh Gupta Tested-by: Jean Pihet Reviewed-by: Kevin Hilman Acked-by: Arjan van de Ven Acked-by: Kevin Hilman Signed-off-by: Len Brown --- arch/arm/mach-at91/cpuidle.c | 31 +++--- arch/arm/mach-davinci/cpuidle.c | 39 +++---- arch/arm/mach-exynos4/cpuidle.c | 23 ++-- arch/arm/mach-kirkwood/cpuidle.c | 30 +++--- arch/arm/mach-omap2/cpuidle34xx.c | 73 ++++++++----- arch/sh/kernel/cpu/shmobile/cpuidle.c | 18 ++-- drivers/acpi/processor_driver.c | 20 +--- drivers/acpi/processor_idle.c | 191 +++++++++++++++++++++++++++++----- drivers/cpuidle/cpuidle.c | 45 +++----- drivers/cpuidle/driver.c | 25 +++++ drivers/cpuidle/governors/ladder.c | 28 +++-- drivers/cpuidle/governors/menu.c | 20 ++-- drivers/cpuidle/sysfs.c | 3 +- drivers/idle/intel_idle.c | 80 ++++++++++---- include/acpi/processor.h | 1 + include/linux/cpuidle.h | 19 ++-- 16 files changed, 439 insertions(+), 207 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 4696a0d61e2e..93178f67420e 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -33,6 +33,7 @@ static struct cpuidle_driver at91_idle_driver = { /* Actual code that puts the SoC in different idle states */ static int at91_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct timeval before, after; @@ -64,27 +65,29 @@ static int at91_enter_idle(struct cpuidle_device *dev, static int at91_init_cpuidle(void) { struct cpuidle_device *device; - - cpuidle_register_driver(&at91_idle_driver); + struct cpuidle_driver *driver = &at91_idle_driver; device = &per_cpu(at91_cpuidle_device, smp_processor_id()); device->state_count = AT91_MAX_STATES; + driver->state_count = AT91_MAX_STATES; /* Wait for interrupt state */ - device->states[0].enter = at91_enter_idle; - device->states[0].exit_latency = 1; - device->states[0].target_residency = 10000; - device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[0].name, "WFI"); - strcpy(device->states[0].desc, "Wait for interrupt"); + driver->states[0].enter = at91_enter_idle; + driver->states[0].exit_latency = 1; + driver->states[0].target_residency = 10000; + driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[0].name, "WFI"); + strcpy(driver->states[0].desc, "Wait for interrupt"); /* Wait for interrupt and RAM self refresh state */ - device->states[1].enter = at91_enter_idle; - device->states[1].exit_latency = 10; - device->states[1].target_residency = 10000; - device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[1].name, "RAM_SR"); - strcpy(device->states[1].desc, "WFI and RAM Self Refresh"); + driver->states[1].enter = at91_enter_idle; + driver->states[1].exit_latency = 10; + driver->states[1].target_residency = 10000; + driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[1].name, "RAM_SR"); + strcpy(driver->states[1].desc, "WFI and RAM Self Refresh"); + + cpuidle_register_driver(&at91_idle_driver); if (cpuidle_register_device(device)) { printk(KERN_ERR "at91_init_cpuidle: Failed registering\n"); diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index f2d2f34603d9..dbeeccd00173 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -78,6 +78,7 @@ static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = { /* Actual code that puts the SoC in different idle states */ static int davinci_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; @@ -109,6 +110,7 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) { int ret; struct cpuidle_device *device; + struct cpuidle_driver *driver = &davinci_idle_driver; struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); @@ -120,32 +122,33 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ddr2_reg_base = pdata->ddr2_ctlr_base; - ret = cpuidle_register_driver(&davinci_idle_driver); - if (ret) { - dev_err(&pdev->dev, "failed to register driver\n"); - return ret; - } - /* Wait for interrupt state */ - device->states[0].enter = davinci_enter_idle; - device->states[0].exit_latency = 1; - device->states[0].target_residency = 10000; - device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[0].name, "WFI"); - strcpy(device->states[0].desc, "Wait for interrupt"); + driver->states[0].enter = davinci_enter_idle; + driver->states[0].exit_latency = 1; + driver->states[0].target_residency = 10000; + driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[0].name, "WFI"); + strcpy(driver->states[0].desc, "Wait for interrupt"); /* Wait for interrupt and DDR self refresh state */ - device->states[1].enter = davinci_enter_idle; - device->states[1].exit_latency = 10; - device->states[1].target_residency = 10000; - device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[1].name, "DDR SR"); - strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + driver->states[1].enter = davinci_enter_idle; + driver->states[1].exit_latency = 10; + driver->states[1].target_residency = 10000; + driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[1].name, "DDR SR"); + strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); if (pdata->ddr2_pdown) davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN; cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]); device->state_count = DAVINCI_CPUIDLE_MAX_STATES; + driver->state_count = DAVINCI_CPUIDLE_MAX_STATES; + + ret = cpuidle_register_driver(&davinci_idle_driver); + if (ret) { + dev_err(&pdev->dev, "failed to register driver\n"); + return ret; + } ret = cpuidle_register_device(device); if (ret) { diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c index ea026e72b977..35f6502144ae 100644 --- a/arch/arm/mach-exynos4/cpuidle.c +++ b/arch/arm/mach-exynos4/cpuidle.c @@ -16,6 +16,7 @@ #include static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); static struct cpuidle_state exynos4_cpuidle_set[] = { @@ -37,6 +38,7 @@ static struct cpuidle_driver exynos4_idle_driver = { }; static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct timeval before, after; @@ -60,22 +62,23 @@ static int __init exynos4_init_cpuidle(void) { int i, max_cpuidle_state, cpu_id; struct cpuidle_device *device; - + struct cpuidle_driver *drv = &exynos4_idle_driver; + + /* Setup cpuidle driver */ + drv->state_count = (sizeof(exynos4_cpuidle_set) / + sizeof(struct cpuidle_state)); + max_cpuidle_state = drv->state_count; + for (i = 0; i < max_cpuidle_state; i++) { + memcpy(&drv->states[i], &exynos4_cpuidle_set[i], + sizeof(struct cpuidle_state)); + } cpuidle_register_driver(&exynos4_idle_driver); for_each_cpu(cpu_id, cpu_online_mask) { device = &per_cpu(exynos4_cpuidle_device, cpu_id); device->cpu = cpu_id; - device->state_count = (sizeof(exynos4_cpuidle_set) / - sizeof(struct cpuidle_state)); - - max_cpuidle_state = device->state_count; - - for (i = 0; i < max_cpuidle_state; i++) { - memcpy(&device->states[i], &exynos4_cpuidle_set[i], - sizeof(struct cpuidle_state)); - } + device->state_count = drv->state_count; if (cpuidle_register_device(device)) { printk(KERN_ERR "CPUidle register device failed\n,"); diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c index 358dd80b3a07..ffd690dc3d33 100644 --- a/arch/arm/mach-kirkwood/cpuidle.c +++ b/arch/arm/mach-kirkwood/cpuidle.c @@ -32,6 +32,7 @@ static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device); /* Actual code that puts the SoC in different idle states */ static int kirkwood_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct timeval before, after; @@ -68,28 +69,29 @@ static int kirkwood_enter_idle(struct cpuidle_device *dev, static int kirkwood_init_cpuidle(void) { struct cpuidle_device *device; - - cpuidle_register_driver(&kirkwood_idle_driver); + struct cpuidle_driver *driver = &kirkwood_idle_driver; device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id()); device->state_count = KIRKWOOD_MAX_STATES; + driver->state_count = KIRKWOOD_MAX_STATES; /* Wait for interrupt state */ - device->states[0].enter = kirkwood_enter_idle; - device->states[0].exit_latency = 1; - device->states[0].target_residency = 10000; - device->states[0].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[0].name, "WFI"); - strcpy(device->states[0].desc, "Wait for interrupt"); + driver->states[0].enter = kirkwood_enter_idle; + driver->states[0].exit_latency = 1; + driver->states[0].target_residency = 10000; + driver->states[0].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[0].name, "WFI"); + strcpy(driver->states[0].desc, "Wait for interrupt"); /* Wait for interrupt and DDR self refresh state */ - device->states[1].enter = kirkwood_enter_idle; - device->states[1].exit_latency = 10; - device->states[1].target_residency = 10000; - device->states[1].flags = CPUIDLE_FLAG_TIME_VALID; - strcpy(device->states[1].name, "DDR SR"); - strcpy(device->states[1].desc, "WFI and DDR Self Refresh"); + driver->states[1].enter = kirkwood_enter_idle; + driver->states[1].exit_latency = 10; + driver->states[1].target_residency = 10000; + driver->states[1].flags = CPUIDLE_FLAG_TIME_VALID; + strcpy(driver->states[1].name, "DDR SR"); + strcpy(driver->states[1].desc, "WFI and DDR Self Refresh"); + cpuidle_register_driver(&kirkwood_idle_driver); if (cpuidle_register_device(device)) { printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n"); return -EIO; diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index d3fce7b97fcf..1fe35c24fba2 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -88,12 +88,14 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, /** * omap3_enter_idle - Programs OMAP3 to enter the specified state * @dev: cpuidle device + * @drv: cpuidle driver * @index: the index of state to be entered * * Called from the CPUidle framework to program the device to the * specified target state selected by the governor. */ static int omap3_enter_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct omap3_idle_statedata *cx = @@ -148,6 +150,7 @@ return_sleep_time: /** * next_valid_state - Find next valid C-state * @dev: cpuidle device + * @drv: cpuidle driver * @index: Index of currently selected c-state * * If the state corresponding to index is valid, index is returned back @@ -158,10 +161,11 @@ return_sleep_time: * if it satisfies the enable_off_mode condition. */ static int next_valid_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct cpuidle_state_usage *curr_usage = &dev->states_usage[index]; - struct cpuidle_state *curr = &dev->states[index]; + struct cpuidle_state *curr = &drv->states[index]; struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage); u32 mpu_deepest_state = PWRDM_POWER_RET; u32 core_deepest_state = PWRDM_POWER_RET; @@ -188,7 +192,7 @@ static int next_valid_state(struct cpuidle_device *dev, /* Reach the current state starting at highest C-state */ for (; idx >= 0; idx--) { - if (&dev->states[idx] == curr) { + if (&drv->states[idx] == curr) { next_index = idx; break; } @@ -224,12 +228,14 @@ static int next_valid_state(struct cpuidle_device *dev, /** * omap3_enter_idle_bm - Checks for any bus activity * @dev: cpuidle device + * @drv: cpuidle driver * @index: array index of target state to be programmed * * This function checks for any pending activity and then programs * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { int new_state_idx; @@ -238,7 +244,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, int ret; if (!omap3_can_sleep()) { - new_state_idx = dev->safe_state_index; + new_state_idx = drv->safe_state_index; goto select_state; } @@ -248,7 +254,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, */ cam_state = pwrdm_read_pwrst(cam_pd); if (cam_state == PWRDM_POWER_ON) { - new_state_idx = dev->safe_state_index; + new_state_idx = drv->safe_state_index; goto select_state; } @@ -275,10 +281,10 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); - new_state_idx = next_valid_state(dev, index); + new_state_idx = next_valid_state(dev, drv, index); select_state: - ret = omap3_enter_idle(dev, new_state_idx); + ret = omap3_enter_idle(dev, drv, new_state_idx); /* Restore original PER state if it was modified */ if (per_next_state != per_saved_state) @@ -311,22 +317,30 @@ struct cpuidle_driver omap3_idle_driver = { .owner = THIS_MODULE, }; -/* Helper to fill the C-state common data and register the driver_data */ -static inline struct omap3_idle_statedata *_fill_cstate( - struct cpuidle_device *dev, +/* Helper to fill the C-state common data*/ +static inline void _fill_cstate(struct cpuidle_driver *drv, int idx, const char *descr) { - struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; - struct cpuidle_state *state = &dev->states[idx]; - struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; + struct cpuidle_state *state = &drv->states[idx]; state->exit_latency = cpuidle_params_table[idx].exit_latency; state->target_residency = cpuidle_params_table[idx].target_residency; state->flags = CPUIDLE_FLAG_TIME_VALID; state->enter = omap3_enter_idle_bm; - cx->valid = cpuidle_params_table[idx].valid; sprintf(state->name, "C%d", idx + 1); strncpy(state->desc, descr, CPUIDLE_DESC_LEN); + +} + +/* Helper to register the driver_data */ +static inline struct omap3_idle_statedata *_fill_cstate_usage( + struct cpuidle_device *dev, + int idx) +{ + struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; + struct cpuidle_state_usage *state_usage = &dev->states_usage[idx]; + + cx->valid = cpuidle_params_table[idx].valid; cpuidle_set_statedata(state_usage, cx); return cx; @@ -341,6 +355,7 @@ static inline struct omap3_idle_statedata *_fill_cstate( int __init omap3_idle_init(void) { struct cpuidle_device *dev; + struct cpuidle_driver *drv = &omap3_idle_driver; struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); @@ -348,45 +363,52 @@ int __init omap3_idle_init(void) per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); - cpuidle_register_driver(&omap3_idle_driver); + + drv->safe_state_index = -1; dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - dev->safe_state_index = -1; /* C1 . MPU WFI + Core active */ - cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); - (&dev->states[0])->enter = omap3_enter_idle; - dev->safe_state_index = 0; + _fill_cstate(drv, 0, "MPU ON + CORE ON"); + (&drv->states[0])->enter = omap3_enter_idle; + drv->safe_state_index = 0; + cx = _fill_cstate_usage(dev, 0); cx->valid = 1; /* C1 is always valid */ cx->mpu_state = PWRDM_POWER_ON; cx->core_state = PWRDM_POWER_ON; /* C2 . MPU WFI + Core inactive */ - cx = _fill_cstate(dev, 1, "MPU ON + CORE ON"); + _fill_cstate(drv, 1, "MPU ON + CORE ON"); + cx = _fill_cstate_usage(dev, 1); cx->mpu_state = PWRDM_POWER_ON; cx->core_state = PWRDM_POWER_ON; /* C3 . MPU CSWR + Core inactive */ - cx = _fill_cstate(dev, 2, "MPU RET + CORE ON"); + _fill_cstate(drv, 2, "MPU RET + CORE ON"); + cx = _fill_cstate_usage(dev, 2); cx->mpu_state = PWRDM_POWER_RET; cx->core_state = PWRDM_POWER_ON; /* C4 . MPU OFF + Core inactive */ - cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON"); + _fill_cstate(drv, 3, "MPU OFF + CORE ON"); + cx = _fill_cstate_usage(dev, 3); cx->mpu_state = PWRDM_POWER_OFF; cx->core_state = PWRDM_POWER_ON; /* C5 . MPU RET + Core RET */ - cx = _fill_cstate(dev, 4, "MPU RET + CORE RET"); + _fill_cstate(drv, 4, "MPU RET + CORE RET"); + cx = _fill_cstate_usage(dev, 4); cx->mpu_state = PWRDM_POWER_RET; cx->core_state = PWRDM_POWER_RET; /* C6 . MPU OFF + Core RET */ - cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET"); + _fill_cstate(drv, 5, "MPU OFF + CORE RET"); + cx = _fill_cstate_usage(dev, 5); cx->mpu_state = PWRDM_POWER_OFF; cx->core_state = PWRDM_POWER_RET; /* C7 . MPU OFF + Core OFF */ - cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF"); + _fill_cstate(drv, 6, "MPU OFF + CORE OFF"); + cx = _fill_cstate_usage(dev, 6); /* * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot * enable OFF mode in a stable form for previous revisions. @@ -400,6 +422,9 @@ int __init omap3_idle_init(void) cx->mpu_state = PWRDM_POWER_OFF; cx->core_state = PWRDM_POWER_OFF; + drv->state_count = OMAP3_NUM_STATES; + cpuidle_register_driver(&omap3_idle_driver); + dev->state_count = OMAP3_NUM_STATES; if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c index 7be50d4c4268..ad1012ad6b42 100644 --- a/arch/sh/kernel/cpu/shmobile/cpuidle.c +++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c @@ -25,6 +25,7 @@ static unsigned long cpuidle_mode[] = { }; static int cpuidle_sleep_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { unsigned long allowed_mode = arch_hwblk_sleep_mode(); @@ -64,19 +65,19 @@ static struct cpuidle_driver cpuidle_driver = { void sh_mobile_setup_cpuidle(void) { struct cpuidle_device *dev = &cpuidle_dev; + struct cpuidle_driver *drv = &cpuidle_driver; struct cpuidle_state *state; int i; - cpuidle_register_driver(&cpuidle_driver); for (i = 0; i < CPUIDLE_STATE_MAX; i++) { - dev->states[i].name[0] = '\0'; - dev->states[i].desc[0] = '\0'; + drv->states[i].name[0] = '\0'; + drv->states[i].desc[0] = '\0'; } i = CPUIDLE_DRIVER_STATE_START; - state = &dev->states[i++]; + state = &drv->states[i++]; snprintf(state->name, CPUIDLE_NAME_LEN, "C1"); strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN); state->exit_latency = 1; @@ -86,10 +87,10 @@ void sh_mobile_setup_cpuidle(void) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = cpuidle_sleep_enter; - dev->safe_state_index = i-1; + drv->safe_state_index = i-1; if (sh_mobile_sleep_supported & SUSP_SH_SF) { - state = &dev->states[i++]; + state = &drv->states[i++]; snprintf(state->name, CPUIDLE_NAME_LEN, "C2"); strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN); @@ -102,7 +103,7 @@ void sh_mobile_setup_cpuidle(void) } if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) { - state = &dev->states[i++]; + state = &drv->states[i++]; snprintf(state->name, CPUIDLE_NAME_LEN, "C3"); strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", CPUIDLE_DESC_LEN); @@ -114,7 +115,10 @@ void sh_mobile_setup_cpuidle(void) state->enter = cpuidle_sleep_enter; } + drv->state_count = i; dev->state_count = i; + cpuidle_register_driver(&cpuidle_driver); + cpuidle_register_device(dev); } diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index a4e0f1ba6040..9d7bc9f6b6cc 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -426,7 +426,7 @@ static int acpi_cpu_soft_notify(struct notifier_block *nfb, if (action == CPU_ONLINE && pr) { acpi_processor_ppc_has_changed(pr, 0); - acpi_processor_cst_has_changed(pr); + acpi_processor_hotplug(pr); acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } @@ -503,8 +503,7 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) acpi_processor_get_throttling_info(pr); acpi_processor_get_limit_info(pr); - - if (cpuidle_get_driver() == &acpi_idle_driver) + if (!cpuidle_get_driver() || cpuidle_get_driver() == &acpi_idle_driver) acpi_processor_power_init(pr, device); pr->cdev = thermal_cooling_device_register("Processor", device, @@ -800,17 +799,9 @@ static int __init acpi_processor_init(void) memset(&errata, 0, sizeof(errata)); - if (!cpuidle_register_driver(&acpi_idle_driver)) { - printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", - acpi_idle_driver.name); - } else { - printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n", - cpuidle_get_driver()->name); - } - result = acpi_bus_register_driver(&acpi_processor_driver); if (result < 0) - goto out_cpuidle; + return result; acpi_processor_install_hotplug_notify(); @@ -821,11 +812,6 @@ static int __init acpi_processor_init(void) acpi_processor_throttling_init(); return 0; - -out_cpuidle: - cpuidle_unregister_driver(&acpi_idle_driver); - - return result; } static void __exit acpi_processor_exit(void) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index b98c75285690..24fe3afa7119 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -741,11 +741,13 @@ static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx) /** * acpi_idle_enter_c1 - enters an ACPI C1 state-type * @dev: the target CPU + * @drv: cpuidle driver containing cpuidle state info * @index: index of target state * * This is equivalent to the HALT instruction. */ -static int acpi_idle_enter_c1(struct cpuidle_device *dev, int index) +static int acpi_idle_enter_c1(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { ktime_t kt1, kt2; s64 idle_time; @@ -787,9 +789,11 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, int index) /** * acpi_idle_enter_simple - enters an ACPI state without BM handling * @dev: the target CPU + * @drv: cpuidle driver with cpuidle state information * @index: the index of suggested state */ -static int acpi_idle_enter_simple(struct cpuidle_device *dev, int index) +static int acpi_idle_enter_simple(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct acpi_processor *pr; struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; @@ -869,11 +873,13 @@ static DEFINE_SPINLOCK(c3_lock); /** * acpi_idle_enter_bm - enters C3 with proper BM handling * @dev: the target CPU + * @drv: cpuidle driver containing state data * @index: the index of suggested state * * If BM is detected, the deepest non-C3 idle state is entered instead. */ -static int acpi_idle_enter_bm(struct cpuidle_device *dev, int index) +static int acpi_idle_enter_bm(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct acpi_processor *pr; struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; @@ -896,9 +902,9 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, int index) } if (!cx->bm_sts_skip && acpi_idle_bm_check()) { - if (dev->safe_state_index >= 0) { - return dev->states[dev->safe_state_index].enter(dev, - dev->safe_state_index); + if (drv->safe_state_index >= 0) { + return drv->states[drv->safe_state_index].enter(dev, + drv, drv->safe_state_index); } else { local_irq_disable(); acpi_safe_halt(); @@ -993,14 +999,15 @@ struct cpuidle_driver acpi_idle_driver = { }; /** - * acpi_processor_setup_cpuidle - prepares and configures CPUIDLE + * acpi_processor_setup_cpuidle_cx - prepares and configures CPUIDLE + * device i.e. per-cpu data + * * @pr: the ACPI processor */ -static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) +static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr) { int i, count = CPUIDLE_DRIVER_STATE_START; struct acpi_processor_cx *cx; - struct cpuidle_state *state; struct cpuidle_state_usage *state_usage; struct cpuidle_device *dev = &pr->power.dev; @@ -1012,18 +1019,12 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) } dev->cpu = pr->id; - dev->safe_state_index = -1; - for (i = 0; i < CPUIDLE_STATE_MAX; i++) { - dev->states[i].name[0] = '\0'; - dev->states[i].desc[0] = '\0'; - } if (max_cstate == 0) max_cstate = 1; for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { cx = &pr->power.states[i]; - state = &dev->states[count]; state_usage = &dev->states_usage[count]; if (!cx->valid) @@ -1035,8 +1036,64 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) continue; #endif + cpuidle_set_statedata(state_usage, cx); + count++; + if (count == CPUIDLE_STATE_MAX) + break; + } + + dev->state_count = count; + + if (!count) + return -EINVAL; + + return 0; +} + +/** + * acpi_processor_setup_cpuidle states- prepares and configures cpuidle + * global state data i.e. idle routines + * + * @pr: the ACPI processor + */ +static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr) +{ + int i, count = CPUIDLE_DRIVER_STATE_START; + struct acpi_processor_cx *cx; + struct cpuidle_state *state; + struct cpuidle_driver *drv = &acpi_idle_driver; + + if (!pr->flags.power_setup_done) + return -EINVAL; + + if (pr->flags.power == 0) + return -EINVAL; + + drv->safe_state_index = -1; + for (i = 0; i < CPUIDLE_STATE_MAX; i++) { + drv->states[i].name[0] = '\0'; + drv->states[i].desc[0] = '\0'; + } + + if (max_cstate == 0) + max_cstate = 1; + + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { + cx = &pr->power.states[i]; + + if (!cx->valid) + continue; + +#ifdef CONFIG_HOTPLUG_CPU + if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) && + !pr->flags.has_cst && + !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) + continue; +#endif + + state = &drv->states[count]; snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i); strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); state->exit_latency = cx->latency; @@ -1049,13 +1106,13 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_c1; - dev->safe_state_index = count; + drv->safe_state_index = count; break; case ACPI_STATE_C2: state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; - dev->safe_state_index = count; + drv->safe_state_index = count; break; case ACPI_STATE_C3: @@ -1071,7 +1128,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) break; } - dev->state_count = count; + drv->state_count = count; if (!count) return -EINVAL; @@ -1079,7 +1136,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) return 0; } -int acpi_processor_cst_has_changed(struct acpi_processor *pr) +int acpi_processor_hotplug(struct acpi_processor *pr) { int ret = 0; @@ -1100,7 +1157,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) cpuidle_disable_device(&pr->power.dev); acpi_processor_get_power_info(pr); if (pr->flags.power) { - acpi_processor_setup_cpuidle(pr); + acpi_processor_setup_cpuidle_cx(pr); ret = cpuidle_enable_device(&pr->power.dev); } cpuidle_resume_and_unlock(); @@ -1108,10 +1165,72 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) return ret; } +int acpi_processor_cst_has_changed(struct acpi_processor *pr) +{ + int cpu; + struct acpi_processor *_pr; + + if (disabled_by_idle_boot_param()) + return 0; + + if (!pr) + return -EINVAL; + + if (nocst) + return -ENODEV; + + if (!pr->flags.power_setup_done) + return -ENODEV; + + /* + * FIXME: Design the ACPI notification to make it once per + * system instead of once per-cpu. This condition is a hack + * to make the code that updates C-States be called once. + */ + + if (smp_processor_id() == 0 && + cpuidle_get_driver() == &acpi_idle_driver) { + + cpuidle_pause_and_lock(); + /* Protect against cpu-hotplug */ + get_online_cpus(); + + /* Disable all cpuidle devices */ + for_each_online_cpu(cpu) { + _pr = per_cpu(processors, cpu); + if (!_pr || !_pr->flags.power_setup_done) + continue; + cpuidle_disable_device(&_pr->power.dev); + } + + /* Populate Updated C-state information */ + acpi_processor_setup_cpuidle_states(pr); + + /* Enable all cpuidle devices */ + for_each_online_cpu(cpu) { + _pr = per_cpu(processors, cpu); + if (!_pr || !_pr->flags.power_setup_done) + continue; + acpi_processor_get_power_info(_pr); + if (_pr->flags.power) { + acpi_processor_setup_cpuidle_cx(_pr); + cpuidle_enable_device(&_pr->power.dev); + } + } + put_online_cpus(); + cpuidle_resume_and_unlock(); + } + + return 0; +} + +static int acpi_processor_registered; + int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device) { acpi_status status = 0; + int retval; static int first_run; if (disabled_by_idle_boot_param()) @@ -1148,9 +1267,26 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, * platforms that only support C1. */ if (pr->flags.power) { - acpi_processor_setup_cpuidle(pr); - if (cpuidle_register_device(&pr->power.dev)) - return -EIO; + /* Register acpi_idle_driver if not already registered */ + if (!acpi_processor_registered) { + acpi_processor_setup_cpuidle_states(pr); + retval = cpuidle_register_driver(&acpi_idle_driver); + if (retval) + return retval; + printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", + acpi_idle_driver.name); + } + /* Register per-cpu cpuidle_device. Cpuidle driver + * must already be registered before registering device + */ + acpi_processor_setup_cpuidle_cx(pr); + retval = cpuidle_register_device(&pr->power.dev); + if (retval) { + if (acpi_processor_registered == 0) + cpuidle_unregister_driver(&acpi_idle_driver); + return retval; + } + acpi_processor_registered++; } return 0; } @@ -1161,8 +1297,13 @@ int acpi_processor_power_exit(struct acpi_processor *pr, if (disabled_by_idle_boot_param()) return 0; - cpuidle_unregister_device(&pr->power.dev); - pr->flags.power_setup_done = 0; + if (pr->flags.power) { + cpuidle_unregister_device(&pr->power.dev); + acpi_processor_registered--; + if (acpi_processor_registered == 0) + cpuidle_unregister_driver(&acpi_idle_driver); + } + pr->flags.power_setup_done = 0; return 0; } diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 7127e92fa8a1..7a57b11eaa8d 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -61,6 +61,7 @@ static int __cpuidle_register_device(struct cpuidle_device *dev); int cpuidle_idle_call(void) { struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices); + struct cpuidle_driver *drv = cpuidle_get_driver(); struct cpuidle_state *target_state; int next_state, entered_state; @@ -84,18 +85,18 @@ int cpuidle_idle_call(void) #endif /* ask the governor for the next state */ - next_state = cpuidle_curr_governor->select(dev); + next_state = cpuidle_curr_governor->select(drv, dev); if (need_resched()) { local_irq_enable(); return 0; } - target_state = &dev->states[next_state]; + target_state = &drv->states[next_state]; trace_power_start(POWER_CSTATE, next_state, dev->cpu); trace_cpu_idle(next_state, dev->cpu); - entered_state = target_state->enter(dev, next_state); + entered_state = target_state->enter(dev, drv, next_state); trace_power_end(dev->cpu); trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu); @@ -163,7 +164,8 @@ void cpuidle_resume_and_unlock(void) EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); #ifdef CONFIG_ARCH_HAS_CPU_RELAX -static int poll_idle(struct cpuidle_device *dev, int index) +static int poll_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { ktime_t t1, t2; s64 diff; @@ -183,12 +185,9 @@ static int poll_idle(struct cpuidle_device *dev, int index) return index; } -static void poll_idle_init(struct cpuidle_device *dev) +static void poll_idle_init(struct cpuidle_driver *drv) { - struct cpuidle_state *state = &dev->states[0]; - struct cpuidle_state_usage *state_usage = &dev->states_usage[0]; - - cpuidle_set_statedata(state_usage, NULL); + struct cpuidle_state *state = &drv->states[0]; snprintf(state->name, CPUIDLE_NAME_LEN, "POLL"); snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); @@ -199,7 +198,7 @@ static void poll_idle_init(struct cpuidle_device *dev) state->enter = poll_idle; } #else -static void poll_idle_init(struct cpuidle_device *dev) {} +static void poll_idle_init(struct cpuidle_driver *drv) {} #endif /* CONFIG_ARCH_HAS_CPU_RELAX */ /** @@ -226,13 +225,13 @@ int cpuidle_enable_device(struct cpuidle_device *dev) return ret; } - poll_idle_init(dev); + poll_idle_init(cpuidle_get_driver()); if ((ret = cpuidle_add_state_sysfs(dev))) return ret; if (cpuidle_curr_governor->enable && - (ret = cpuidle_curr_governor->enable(dev))) + (ret = cpuidle_curr_governor->enable(cpuidle_get_driver(), dev))) goto fail_sysfs; for (i = 0; i < dev->state_count; i++) { @@ -273,7 +272,7 @@ void cpuidle_disable_device(struct cpuidle_device *dev) dev->enabled = 0; if (cpuidle_curr_governor->disable) - cpuidle_curr_governor->disable(dev); + cpuidle_curr_governor->disable(cpuidle_get_driver(), dev); cpuidle_remove_state_sysfs(dev); enabled_devices--; @@ -301,26 +300,6 @@ static int __cpuidle_register_device(struct cpuidle_device *dev) init_completion(&dev->kobj_unregister); - /* - * cpuidle driver should set the dev->power_specified bit - * before registering the device if the driver provides - * power_usage numbers. - * - * For those devices whose ->power_specified is not set, - * we fill in power_usage with decreasing values as the - * cpuidle code has an implicit assumption that state Cn - * uses less power than C(n-1). - * - * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned - * an power value of -1. So we use -2, -3, etc, for other - * c-states. - */ - if (!dev->power_specified) { - int i; - for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) - dev->states[i].power_usage = -1 - i; - } - per_cpu(cpuidle_devices, dev->cpu) = dev; list_add(&dev->device_list, &cpuidle_detected_devices); if ((ret = cpuidle_add_sysfs(sys_dev))) { diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 3f7e3cedd133..284d7af5a9c8 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -17,6 +17,30 @@ static struct cpuidle_driver *cpuidle_curr_driver; DEFINE_SPINLOCK(cpuidle_driver_lock); +static void __cpuidle_register_driver(struct cpuidle_driver *drv) +{ + int i; + /* + * cpuidle driver should set the drv->power_specified bit + * before registering if the driver provides + * power_usage numbers. + * + * If power_specified is not set, + * we fill in power_usage with decreasing values as the + * cpuidle code has an implicit assumption that state Cn + * uses less power than C(n-1). + * + * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned + * an power value of -1. So we use -2, -3, etc, for other + * c-states. + */ + if (!drv->power_specified) { + for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) + drv->states[i].power_usage = -1 - i; + } +} + + /** * cpuidle_register_driver - registers a driver * @drv: the driver @@ -34,6 +58,7 @@ int cpuidle_register_driver(struct cpuidle_driver *drv) spin_unlock(&cpuidle_driver_lock); return -EBUSY; } + __cpuidle_register_driver(drv); cpuidle_curr_driver = drv; spin_unlock(&cpuidle_driver_lock); diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c index 6a686a76711f..ef6b9e4727a7 100644 --- a/drivers/cpuidle/governors/ladder.c +++ b/drivers/cpuidle/governors/ladder.c @@ -60,9 +60,11 @@ static inline void ladder_do_selection(struct ladder_device *ldev, /** * ladder_select_state - selects the next state to enter + * @drv: cpuidle driver * @dev: the CPU */ -static int ladder_select_state(struct cpuidle_device *dev) +static int ladder_select_state(struct cpuidle_driver *drv, + struct cpuidle_device *dev) { struct ladder_device *ldev = &__get_cpu_var(ladder_devices); struct ladder_device_state *last_state; @@ -77,15 +79,17 @@ static int ladder_select_state(struct cpuidle_device *dev) last_state = &ldev->states[last_idx]; - if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID) - last_residency = cpuidle_get_last_residency(dev) - dev->states[last_idx].exit_latency; + if (drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID) { + last_residency = cpuidle_get_last_residency(dev) - \ + drv->states[last_idx].exit_latency; + } else last_residency = last_state->threshold.promotion_time + 1; /* consider promotion */ - if (last_idx < dev->state_count - 1 && + if (last_idx < drv->state_count - 1 && last_residency > last_state->threshold.promotion_time && - dev->states[last_idx + 1].exit_latency <= latency_req) { + drv->states[last_idx + 1].exit_latency <= latency_req) { last_state->stats.promotion_count++; last_state->stats.demotion_count = 0; if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) { @@ -96,11 +100,11 @@ static int ladder_select_state(struct cpuidle_device *dev) /* consider demotion */ if (last_idx > CPUIDLE_DRIVER_STATE_START && - dev->states[last_idx].exit_latency > latency_req) { + drv->states[last_idx].exit_latency > latency_req) { int i; for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) { - if (dev->states[i].exit_latency <= latency_req) + if (drv->states[i].exit_latency <= latency_req) break; } ladder_do_selection(ldev, last_idx, i); @@ -123,9 +127,11 @@ static int ladder_select_state(struct cpuidle_device *dev) /** * ladder_enable_device - setup for the governor + * @drv: cpuidle driver * @dev: the CPU */ -static int ladder_enable_device(struct cpuidle_device *dev) +static int ladder_enable_device(struct cpuidle_driver *drv, + struct cpuidle_device *dev) { int i; struct ladder_device *ldev = &per_cpu(ladder_devices, dev->cpu); @@ -134,8 +140,8 @@ static int ladder_enable_device(struct cpuidle_device *dev) ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START; - for (i = 0; i < dev->state_count; i++) { - state = &dev->states[i]; + for (i = 0; i < drv->state_count; i++) { + state = &drv->states[i]; lstate = &ldev->states[i]; lstate->stats.promotion_count = 0; @@ -144,7 +150,7 @@ static int ladder_enable_device(struct cpuidle_device *dev) lstate->threshold.promotion_count = PROMOTION_COUNT; lstate->threshold.demotion_count = DEMOTION_COUNT; - if (i < dev->state_count - 1) + if (i < drv->state_count - 1) lstate->threshold.promotion_time = state->exit_latency; if (i > 0) lstate->threshold.demotion_time = state->exit_latency; diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index af724e823c8e..bcbe88142135 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -182,7 +182,7 @@ static inline int performance_multiplier(void) static DEFINE_PER_CPU(struct menu_device, menu_devices); -static void menu_update(struct cpuidle_device *dev); +static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev); /* This implements DIV_ROUND_CLOSEST but avoids 64 bit division */ static u64 div_round64(u64 dividend, u32 divisor) @@ -228,9 +228,10 @@ static void detect_repeating_patterns(struct menu_device *data) /** * menu_select - selects the next idle state to enter + * @drv: cpuidle driver containing state data * @dev: the CPU */ -static int menu_select(struct cpuidle_device *dev) +static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY); @@ -240,7 +241,7 @@ static int menu_select(struct cpuidle_device *dev) struct timespec t; if (data->needs_update) { - menu_update(dev); + menu_update(drv, dev); data->needs_update = 0; } @@ -285,8 +286,8 @@ static int menu_select(struct cpuidle_device *dev) * Find the idle state with the lowest power while satisfying * our constraints. */ - for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) { - struct cpuidle_state *s = &dev->states[i]; + for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) { + struct cpuidle_state *s = &drv->states[i]; if (s->target_residency > data->predicted_us) continue; @@ -323,14 +324,15 @@ static void menu_reflect(struct cpuidle_device *dev, int index) /** * menu_update - attempts to guess what happened after entry + * @drv: cpuidle driver containing state data * @dev: the CPU */ -static void menu_update(struct cpuidle_device *dev) +static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int last_idx = data->last_state_idx; unsigned int last_idle_us = cpuidle_get_last_residency(dev); - struct cpuidle_state *target = &dev->states[last_idx]; + struct cpuidle_state *target = &drv->states[last_idx]; unsigned int measured_us; u64 new_factor; @@ -384,9 +386,11 @@ static void menu_update(struct cpuidle_device *dev) /** * menu_enable_device - scans a CPU's states and does setup + * @drv: cpuidle driver * @dev: the CPU */ -static int menu_enable_device(struct cpuidle_device *dev) +static int menu_enable_device(struct cpuidle_driver *drv, + struct cpuidle_device *dev) { struct menu_device *data = &per_cpu(menu_devices, dev->cpu); diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 8a1ace104476..1e756e160dca 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -322,13 +322,14 @@ int cpuidle_add_state_sysfs(struct cpuidle_device *device) { int i, ret = -ENOMEM; struct cpuidle_state_kobj *kobj; + struct cpuidle_driver *drv = cpuidle_get_driver(); /* state statistics */ for (i = 0; i < device->state_count; i++) { kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL); if (!kobj) goto error_state; - kobj->state = &device->states[i]; + kobj->state = &drv->states[i]; kobj->state_usage = &device->states_usage[i]; init_completion(&kobj->kobj_unregister); diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 3aa8d4cb6dca..5be9d599ff6b 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -81,7 +81,8 @@ static unsigned int mwait_substates; static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */ static struct cpuidle_device __percpu *intel_idle_cpuidle_devices; -static int intel_idle(struct cpuidle_device *dev, int index); +static int intel_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); static struct cpuidle_state *cpuidle_state_table; @@ -227,13 +228,15 @@ static int get_driver_data(int cstate) /** * intel_idle * @dev: cpuidle_device + * @drv: cpuidle driver * @index: index of cpuidle state * */ -static int intel_idle(struct cpuidle_device *dev, int index) +static int intel_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { unsigned long ecx = 1; /* break on interrupt flag */ - struct cpuidle_state *state = &dev->states[index]; + struct cpuidle_state *state = &drv->states[index]; struct cpuidle_state_usage *state_usage = &dev->states_usage[index]; unsigned long eax = (unsigned long)cpuidle_get_statedata(state_usage); unsigned int cstate; @@ -419,6 +422,60 @@ static void intel_idle_cpuidle_devices_uninit(void) free_percpu(intel_idle_cpuidle_devices); return; } +/* + * intel_idle_cpuidle_driver_init() + * allocate, initialize cpuidle_states + */ +static int intel_idle_cpuidle_driver_init(void) +{ + int cstate; + struct cpuidle_driver *drv = &intel_idle_driver; + + drv->state_count = 1; + + for (cstate = 1; cstate < MWAIT_MAX_NUM_CSTATES; ++cstate) { + int num_substates; + + if (cstate > max_cstate) { + printk(PREFIX "max_cstate %d reached\n", + max_cstate); + break; + } + + /* does the state exist in CPUID.MWAIT? */ + num_substates = (mwait_substates >> ((cstate) * 4)) + & MWAIT_SUBSTATE_MASK; + if (num_substates == 0) + continue; + /* is the state not enabled? */ + if (cpuidle_state_table[cstate].enter == NULL) { + /* does the driver not know about the state? */ + if (*cpuidle_state_table[cstate].name == '\0') + pr_debug(PREFIX "unaware of model 0x%x" + " MWAIT %d please" + " contact lenb@kernel.org", + boot_cpu_data.x86_model, cstate); + continue; + } + + if ((cstate > 2) && + !boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) + mark_tsc_unstable("TSC halts in idle" + " states deeper than C2"); + + drv->states[drv->state_count] = /* structure copy */ + cpuidle_state_table[cstate]; + + drv->state_count += 1; + } + + if (auto_demotion_disable_flags) + smp_call_function(auto_demotion_disable, NULL, 1); + + return 0; +} + + /* * intel_idle_cpuidle_devices_init() * allocate, initialize, register cpuidle_devices @@ -453,23 +510,9 @@ static int intel_idle_cpuidle_devices_init(void) continue; /* is the state not enabled? */ if (cpuidle_state_table[cstate].enter == NULL) { - /* does the driver not know about the state? */ - if (*cpuidle_state_table[cstate].name == '\0') - pr_debug(PREFIX "unaware of model 0x%x" - " MWAIT %d please" - " contact lenb@kernel.org", - boot_cpu_data.x86_model, cstate); continue; } - if ((cstate > 2) && - !boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) - mark_tsc_unstable("TSC halts in idle" - " states deeper than C2"); - - dev->states[dev->state_count] = /* structure copy */ - cpuidle_state_table[cstate]; - dev->states_usage[dev->state_count].driver_data = (void *)get_driver_data(cstate); @@ -484,8 +527,6 @@ static int intel_idle_cpuidle_devices_init(void) return -EIO; } } - if (auto_demotion_disable_flags) - smp_call_function(auto_demotion_disable, NULL, 1); return 0; } @@ -503,6 +544,7 @@ static int __init intel_idle_init(void) if (retval) return retval; + intel_idle_cpuidle_driver_init(); retval = cpuidle_register_driver(&intel_idle_driver); if (retval) { printk(KERN_DEBUG PREFIX "intel_idle yielding to %s", diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 67055f180330..610f6fb1bbc2 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -329,6 +329,7 @@ extern void acpi_processor_throttling_init(void); int acpi_processor_power_init(struct acpi_processor *pr, struct acpi_device *device); int acpi_processor_cst_has_changed(struct acpi_processor *pr); +int acpi_processor_hotplug(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr, struct acpi_device *device); int acpi_processor_suspend(struct acpi_device * device, pm_message_t state); diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 0156540b3f79..c90418822f40 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -22,6 +22,7 @@ #define CPUIDLE_DESC_LEN 32 struct cpuidle_device; +struct cpuidle_driver; /**************************** @@ -45,6 +46,7 @@ struct cpuidle_state { unsigned int target_residency; /* in US */ int (*enter) (struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index); }; @@ -83,12 +85,10 @@ struct cpuidle_state_kobj { struct cpuidle_device { unsigned int registered:1; unsigned int enabled:1; - unsigned int power_specified:1; unsigned int cpu; int last_residency; int state_count; - struct cpuidle_state states[CPUIDLE_STATE_MAX]; struct cpuidle_state_usage states_usage[CPUIDLE_STATE_MAX]; struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX]; @@ -96,7 +96,6 @@ struct cpuidle_device { struct kobject kobj; struct completion kobj_unregister; void *governor_data; - int safe_state_index; }; DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices); @@ -120,6 +119,11 @@ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev) struct cpuidle_driver { char name[CPUIDLE_NAME_LEN]; struct module *owner; + + unsigned int power_specified:1; + struct cpuidle_state states[CPUIDLE_STATE_MAX]; + int state_count; + int safe_state_index; }; #ifdef CONFIG_CPU_IDLE @@ -166,10 +170,13 @@ struct cpuidle_governor { struct list_head governor_list; unsigned int rating; - int (*enable) (struct cpuidle_device *dev); - void (*disable) (struct cpuidle_device *dev); + int (*enable) (struct cpuidle_driver *drv, + struct cpuidle_device *dev); + void (*disable) (struct cpuidle_driver *drv, + struct cpuidle_device *dev); - int (*select) (struct cpuidle_device *dev); + int (*select) (struct cpuidle_driver *drv, + struct cpuidle_device *dev); void (*reflect) (struct cpuidle_device *dev, int index); struct module *owner; -- cgit v1.2.3 From 0c073e35550879fd133bc3fe509df5b88da51278 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sat, 8 Oct 2011 23:24:48 -0400 Subject: arm: Add export.h to recently added files for EXPORT_SYMBOL These files didn't exist at the time of the module.h split, and so were not fixed by the commits on that baseline. Since they use the EXPORT_SYMBOL and/or THIS_MODULE macros, they will need the new export.h file included that provides them. Signed-off-by: Paul Gortmaker Signed-off-by: Linus Torvalds --- arch/arm/plat-samsung/dma-ops.c | 1 + arch/arm/plat-samsung/s3c-dma-ops.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index 6e3d9abc9e2e..93a994a5dd8f 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -14,6 +14,7 @@ #include #include #include +#include #include diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c index 582333c70585..781494912827 100644 --- a/arch/arm/plat-samsung/s3c-dma-ops.c +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -14,6 +14,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From 5558141556d20f2bea7a664d70a867b8f64ca38d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 7 Nov 2011 12:27:10 -0800 Subject: ARM: OMAP: omap_device: Include linux/export.h Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/omap_device.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index cd90bedd9306..f839f948421a 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -78,6 +78,7 @@ #undef DEBUG #include +#include #include #include #include -- cgit v1.2.3 From a1bcc1dcef8451b4291ea2a1b2677cb194102952 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Nov 2011 12:27:10 -0800 Subject: ARM: OMAP: Fix export.h or module.h includes Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/dsp.c | 1 + arch/arm/mach-omap2/mailbox.c | 1 + arch/arm/mach-omap2/omap-iommu.c | 1 + arch/arm/mach-omap2/smartreflex.c | 1 + 4 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 911cd2e68d46..74f18f2952df 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -18,6 +18,7 @@ * of the OMAP PM core code. */ +#include #include #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 86d564a640bb..609ea2ded7e3 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -10,6 +10,7 @@ * for more details. */ +#include #include #include #include diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index e61feadcda4e..b8822048e409 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 0347b93211e6..6a4f6839a7d9 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -17,6 +17,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include -- cgit v1.2.3 From ad61d64e263228a418fe25809a23d5107cf778a0 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 7 Nov 2011 13:36:56 +0000 Subject: powerpc/kvm: Fix build with older toolchains Fix KVM build for older toolchains (found with .powerpc64-unknown-linux-gnu-gcc (crosstool-NG-1.8.1) 4.3.2): AS arch/powerpc/kvm/book3s_hv_rmhandlers.o arch/powerpc/kvm/book3s_hv_rmhandlers.S: Assembler messages: arch/powerpc/kvm/book3s_hv_rmhandlers.S:1388: Error: Unrecognized opcode: `popcntw' make[1]: *** [arch/powerpc/kvm/book3s_hv_rmhandlers.o] Error 1 make: *** [_module_arch/powerpc/kvm] Error 2 Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index f422231d9235..44d8829334ab 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1263,7 +1263,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) addi r6,r5,VCORE_NAPPING_THREADS 31: lwarx r4,0,r6 or r4,r4,r0 - popcntw r7,r4 + PPC_POPCNTW(r7,r4) cmpw r7,r8 bge 2f stwcx. r4,0,r6 -- cgit v1.2.3 From 88cf11b4cca8ee0044d0a10ce100d8c0012b2c5e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Mon, 7 Nov 2011 14:49:13 +0000 Subject: powerpc: Add KVM as module to defconfigs Add HV mode KVM to Book3 server 64bit defconfigs as a module. Doesn't add much to the size: text data bss dec hex filename 8244109 4686767 994000 13924876 d47a0c vmlinux.vanilla 8256092 4691607 994128 13941827 d4bc43 vmlinux.kvm This should enable more testing of this configuration. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64_defconfig | 4 ++++ arch/powerpc/configs/pseries_defconfig | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 84a685a505fe..535711fcb13c 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -485,3 +485,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_BOOK3S_64=m +CONFIG_KVM_BOOK3S_64_HV=y +CONFIG_VHOST_NET=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 96a58b709705..a72f2415a647 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -362,3 +362,7 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_BOOK3S_64=m +CONFIG_KVM_BOOK3S_64_HV=y +CONFIG_VHOST_NET=m -- cgit v1.2.3 From c40dd2f76644016ca7677545fc846ec2470d70a1 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 2 Nov 2011 14:56:12 +0000 Subject: powerpc: Add System RAM to /proc/iomem We've resisted adding System RAM to /proc/iomem because it is the wrong place for it. Unfortunately we continue to find tools that rely on this behaviour so give up and add it in. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mem.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 16da595ff402..2dd6bdd31fe1 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -555,3 +556,32 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, book3e_hugetlb_preload(vma->vm_mm, address, *ptep); #endif } + +/* + * System memory should not be in /proc/iomem but various tools expect it + * (eg kdump). + */ +static int add_system_ram_resources(void) +{ + struct memblock_region *reg; + + for_each_memblock(memory, reg) { + struct resource *res; + unsigned long base = reg->base; + unsigned long size = reg->size; + + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + WARN_ON(!res); + + if (res) { + res->name = "System RAM"; + res->start = base; + res->end = base + size - 1; + res->flags = IORESOURCE_MEM; + WARN_ON(request_resource(&iomem_resource, res) < 0); + } + } + + return 0; +} +subsys_initcall(add_system_ram_resources); -- cgit v1.2.3 From 1c8ee73395af762726e9eb628636d3b763618c60 Mon Sep 17 00:00:00 2001 From: Dipankar Sarma Date: Fri, 28 Oct 2011 04:25:32 +0000 Subject: powerpc/numa: NUMA topology support for PowerNV This patch adds support for numa topology on powernv platforms running OPAL formware. It checks for the type of platform at run time and sets the affinity form correctly so that NUMA topology can be discovered correctly. Signed-off-by: Dipankar Sarma Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/numa.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index c7dd4dec4df8..b22a83a91cb8 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -315,7 +315,10 @@ static int __init find_min_common_depth(void) struct device_node *root; const char *vec5; - root = of_find_node_by_path("/rtas"); + if (firmware_has_feature(FW_FEATURE_OPAL)) + root = of_find_node_by_path("/ibm,opal"); + else + root = of_find_node_by_path("/rtas"); if (!root) root = of_find_node_by_path("/"); @@ -344,12 +347,19 @@ static int __init find_min_common_depth(void) #define VEC5_AFFINITY_BYTE 5 #define VEC5_AFFINITY 0x80 - chosen = of_find_node_by_path("/chosen"); - if (chosen) { - vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL); - if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) { - dbg("Using form 1 affinity\n"); - form1_affinity = 1; + + if (firmware_has_feature(FW_FEATURE_OPAL)) + form1_affinity = 1; + else { + chosen = of_find_node_by_path("/chosen"); + if (chosen) { + vec5 = of_get_property(chosen, + "ibm,architecture-vec-5", NULL); + if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & + VEC5_AFFINITY)) { + dbg("Using form 1 affinity\n"); + form1_affinity = 1; + } } } -- cgit v1.2.3 From a3a9f3b47d12b5f6dfc9c7ed9d7b193d77812195 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 21 Oct 2011 23:56:27 +0000 Subject: powerpc/irq: Remove IRQF_DISABLED Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang Acked-by: Arnd Bergmann Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/floppy.h | 4 ++-- arch/powerpc/include/asm/xics.h | 4 ++-- arch/powerpc/kernel/smp.c | 2 +- arch/powerpc/platforms/cell/beat.c | 2 +- arch/powerpc/platforms/cell/celleb_scc_pciex.c | 2 +- arch/powerpc/platforms/cell/iommu.c | 3 +-- arch/powerpc/platforms/cell/pmu.c | 2 +- arch/powerpc/platforms/cell/spu_base.c | 9 +++------ arch/powerpc/platforms/powermac/pic.c | 1 - arch/powerpc/platforms/powermac/smp.c | 4 ++-- arch/powerpc/platforms/ps3/device-init.c | 2 +- arch/powerpc/sysdev/mpic.c | 2 -- arch/powerpc/sysdev/ppc4xx_soc.c | 2 +- arch/powerpc/sysdev/xics/xics-common.c | 5 ++--- 14 files changed, 18 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h index 24bd34c57e9d..936a904ae78c 100644 --- a/arch/powerpc/include/asm/floppy.h +++ b/arch/powerpc/include/asm/floppy.h @@ -108,10 +108,10 @@ static int fd_request_irq(void) { if (can_use_virtual_dma) return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); else return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); + 0, "floppy", NULL); } static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h index bd6c401c0ee5..c48de98ba94e 100644 --- a/arch/powerpc/include/asm/xics.h +++ b/arch/powerpc/include/asm/xics.h @@ -15,8 +15,8 @@ #define DEFAULT_PRIORITY 5 /* - * Mark IPIs as higher priority so we can take them inside interrupts that - * arent marked IRQF_DISABLED + * Mark IPIs as higher priority so we can take them inside interrupts + * FIXME: still true now? */ #define IPI_PRIORITY 4 diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 25ddbfc7dd36..6df70907d60a 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -187,7 +187,7 @@ int smp_request_message_ipi(int virq, int msg) return 1; } #endif - err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU, + err = request_irq(virq, smp_ipi_action[msg], IRQF_PERCPU, smp_ipi_name[msg], 0); WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n", virq, smp_ipi_name[msg], err); diff --git a/arch/powerpc/platforms/cell/beat.c b/arch/powerpc/platforms/cell/beat.c index 232fc384e855..852592b2b712 100644 --- a/arch/powerpc/platforms/cell/beat.c +++ b/arch/powerpc/platforms/cell/beat.c @@ -230,7 +230,7 @@ static int __init beat_register_event(void) } ev->virq = virq; - rc = request_irq(virq, ev->handler, IRQF_DISABLED, + rc = request_irq(virq, ev->handler, 0, ev->typecode, NULL); if (rc != 0) { printk(KERN_ERR "Beat: failed to request virtual IRQ" diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index ae790ac4a589..14be2bd358b8 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -514,7 +514,7 @@ static __init int celleb_setup_pciex(struct device_node *node, virq = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); if (request_irq(virq, pciex_handle_internal_irq, - IRQF_DISABLED, "pciex", (void *)phb)) { + 0, "pciex", (void *)phb)) { pr_err("PCIEXC:Failed to request irq\n"); goto error; } diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index fc46fcac3921..592c3d51b817 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -412,8 +412,7 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); BUG_ON(virq == NO_IRQ); - ret = request_irq(virq, ioc_interrupt, IRQF_DISABLED, - iommu->name, iommu); + ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu); BUG_ON(ret); /* set the IOC segment table origin register (and turn on the iommu) */ diff --git a/arch/powerpc/platforms/cell/pmu.c b/arch/powerpc/platforms/cell/pmu.c index 1acf36010423..59c1a1694104 100644 --- a/arch/powerpc/platforms/cell/pmu.c +++ b/arch/powerpc/platforms/cell/pmu.c @@ -392,7 +392,7 @@ static int __init cbe_init_pm_irq(void) } rc = request_irq(irq, cbe_pm_irq, - IRQF_DISABLED, "cbe-pmu-0", NULL); + 0, "cbe-pmu-0", NULL); if (rc) { printk("ERROR: Request for irq on node %d failed\n", node); diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 3675da73623f..e94d3ecdd8bb 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -442,8 +442,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); ret = request_irq(spu->irqs[0], spu_irq_class_0, - IRQF_DISABLED, - spu->irq_c0, spu); + 0, spu->irq_c0, spu); if (ret) goto bail0; } @@ -451,8 +450,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); ret = request_irq(spu->irqs[1], spu_irq_class_1, - IRQF_DISABLED, - spu->irq_c1, spu); + 0, spu->irq_c1, spu); if (ret) goto bail1; } @@ -460,8 +458,7 @@ static int spu_request_irqs(struct spu *spu) snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); ret = request_irq(spu->irqs[2], spu_irq_class_2, - IRQF_DISABLED, - spu->irq_c2, spu); + 0, spu->irq_c2, spu); if (ret) goto bail2; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index cb40e921a565..901bfbddc3dd 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -272,7 +272,6 @@ static struct irqaction xmon_action = { static struct irqaction gatwick_cascade_action = { .handler = gatwick_action, - .flags = IRQF_DISABLED, .name = "cascade", }; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 9a521dc8e485..9b6a820bdd7d 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -200,7 +200,7 @@ static int psurge_secondary_ipi_init(void) if (psurge_secondary_virq) rc = request_irq(psurge_secondary_virq, psurge_ipi_intr, - IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL); + IRQF_PERCPU, "IPI", NULL); if (rc) pr_err("Failed to setup secondary cpu IPI\n"); @@ -408,7 +408,7 @@ static int __init smp_psurge_kick_cpu(int nr) static struct irqaction psurge_irqaction = { .handler = psurge_ipi_intr, - .flags = IRQF_DISABLED|IRQF_PERCPU, + .flags = IRQF_PERCPU, .name = "primary IPI", }; diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c index 6c4b5837fc8a..3f175e8aedb4 100644 --- a/arch/powerpc/platforms/ps3/device-init.c +++ b/arch/powerpc/platforms/ps3/device-init.c @@ -825,7 +825,7 @@ static int ps3_probe_thread(void *data) spin_lock_init(&dev.lock); - res = request_irq(irq, ps3_notification_interrupt, IRQF_DISABLED, + res = request_irq(irq, ps3_notification_interrupt, 0, "ps3_notification", &dev); if (res) { pr_err("%s:%u: request_irq failed %d\n", __func__, __LINE__, diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0842c6f8a3e6..8c7e8528e7c4 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -800,8 +800,6 @@ static void mpic_end_ipi(struct irq_data *d) * IPIs are marked IRQ_PER_CPU. This has the side effect of * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from * applying to them. We EOI them late to avoid re-entering. - * We mark IPI's with IRQF_DISABLED as they must run with - * irqs disabled. */ mpic_eoi(mpic); } diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c index d3d6ce3c33b4..0debcc31ad70 100644 --- a/arch/powerpc/sysdev/ppc4xx_soc.c +++ b/arch/powerpc/sysdev/ppc4xx_soc.c @@ -115,7 +115,7 @@ static int __init ppc4xx_l2c_probe(void) } /* Install error handler */ - if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { + if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) { printk(KERN_ERR "Cannot install L2C error handler" ", cache is not enabled\n"); of_node_put(np); diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index 3d93a8ded0f8..63762c672a03 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -134,11 +134,10 @@ static void xics_request_ipi(void) BUG_ON(ipi == NO_IRQ); /* - * IPIs are marked IRQF_DISABLED as they must run with irqs - * disabled, and PERCPU. The handler was set in map. + * IPIs are marked IRQF_PERCPU. The handler was set in map. */ BUG_ON(request_irq(ipi, icp_ops->ipi_action, - IRQF_DISABLED|IRQF_PERCPU, "IPI", NULL)); + IRQF_PERCPU, "IPI", NULL)); } int __init xics_smp_probe(void) -- cgit v1.2.3 From 5233e26ebb90242e3691c185ddda02dc83649e7d Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 12 Oct 2011 08:39:15 +0000 Subject: powerpc/ps3: Fix PS3 repository build warnings Fix uninitialized variable warnings in build of repository.c Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/ps3/repository.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c index 5e304c292f68..ca40f6afd35d 100644 --- a/arch/powerpc/platforms/ps3/repository.c +++ b/arch/powerpc/platforms/ps3/repository.c @@ -184,7 +184,7 @@ int ps3_repository_read_bus_type(unsigned int bus_index, enum ps3_bus_type *bus_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -199,7 +199,7 @@ int ps3_repository_read_bus_num_dev(unsigned int bus_index, unsigned int *num_dev) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -239,7 +239,7 @@ int ps3_repository_read_dev_type(unsigned int bus_index, unsigned int dev_index, enum ps3_dev_type *dev_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -256,8 +256,8 @@ int ps3_repository_read_dev_intr(unsigned int bus_index, enum ps3_interrupt_type *intr_type, unsigned int *interrupt_id) { int result; - u64 v1; - u64 v2; + u64 v1 = 0; + u64 v2 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -275,7 +275,7 @@ int ps3_repository_read_dev_reg_type(unsigned int bus_index, enum ps3_reg_type *reg_type) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -615,7 +615,7 @@ int ps3_repository_read_stor_dev_num_regions(unsigned int bus_index, unsigned int dev_index, unsigned int *num_regions) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -631,7 +631,7 @@ int ps3_repository_read_stor_dev_region_id(unsigned int bus_index, unsigned int *region_id) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("bus", bus_index), @@ -786,7 +786,7 @@ int ps3_repository_read_mm_info(u64 *rm_base, u64 *rm_size, u64 *region_total) int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -805,7 +805,7 @@ int ps3_repository_read_num_spu_reserved(unsigned int *num_spu_reserved) int ps3_repository_read_num_spu_resource_id(unsigned int *num_resource_id) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -827,8 +827,8 @@ int ps3_repository_read_spu_resource_id(unsigned int res_index, enum ps3_spu_resource_type *resource_type, unsigned int *resource_id) { int result; - u64 v1; - u64 v2; + u64 v1 = 0; + u64 v2 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -854,7 +854,7 @@ static int ps3_repository_read_boot_dat_address(u64 *address) int ps3_repository_read_boot_dat_size(unsigned int *size) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -869,7 +869,7 @@ int ps3_repository_read_boot_dat_size(unsigned int *size) int ps3_repository_read_vuart_av_port(unsigned int *port) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -884,7 +884,7 @@ int ps3_repository_read_vuart_av_port(unsigned int *port) int ps3_repository_read_vuart_sysmgr_port(unsigned int *port) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_CURRENT, make_first_field("bi", 0), @@ -919,7 +919,7 @@ int ps3_repository_read_boot_dat_info(u64 *lpar_addr, unsigned int *size) int ps3_repository_read_num_be(unsigned int *num_be) { int result; - u64 v1; + u64 v1 = 0; result = read_node(PS3_LPAR_ID_PME, make_first_field("ben", 0), -- cgit v1.2.3 From 9fce85f7ff94f1a877c15ad3d6ffbaed4b5cd1a6 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 12 Oct 2011 08:42:13 +0000 Subject: powerpc/ps3: Fix lv1_gpu_attribute hcall The lv1_gpu_attribute hcall takes three, not five input arguments. Adjust the lv1 hcall table and all calls. Signed-off-by: Geoff Levand CC: Takashi Iwai Acked-by: Takashi Iwai Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/lv1call.h | 2 +- sound/ppc/snd_ps3.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h index 9cd5fc828a37..f77c708c67a0 100644 --- a/arch/powerpc/include/asm/lv1call.h +++ b/arch/powerpc/include/asm/lv1call.h @@ -316,7 +316,7 @@ LV1_CALL(gpu_context_free, 1, 0, 218 ) LV1_CALL(gpu_context_iomap, 5, 0, 221 ) LV1_CALL(gpu_context_attribute, 6, 0, 225 ) LV1_CALL(gpu_context_intr, 1, 1, 227 ) -LV1_CALL(gpu_attribute, 5, 0, 228 ) +LV1_CALL(gpu_attribute, 3, 0, 228 ) LV1_CALL(get_rtc, 0, 2, 232 ) LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index a3ce1b22620d..1aa52eff526a 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -876,7 +876,7 @@ static void __devinit snd_ps3_audio_set_base_addr(uint64_t ioaddr_start) (0x0fUL << 12) | (PS3_AUDIO_IOID); - ret = lv1_gpu_attribute(0x100, 0x007, val, 0, 0); + ret = lv1_gpu_attribute(0x100, 0x007, val); if (ret) pr_info("%s: gpu_attribute failed %d\n", __func__, ret); -- cgit v1.2.3 From 5ccf55dd8177295813b68780f0a3c85e47306be1 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Tue, 13 Sep 2011 04:15:31 +0000 Subject: powerpc/kvm: Fix build failure with HV KVM and CBE When running with HV KVM and CBE config options enabled, I get build failures like the following: arch/powerpc/kernel/head_64.o: In function `cbe_system_error_hv': (.text+0x1228): undefined reference to `do_kvm_0x1202' arch/powerpc/kernel/head_64.o: In function `cbe_maintenance_hv': (.text+0x1628): undefined reference to `do_kvm_0x1602' arch/powerpc/kernel/head_64.o: In function `cbe_thermal_hv': (.text+0x1828): undefined reference to `do_kvm_0x1802' This is because we jump to a KVM handler when HV is enabled, but we only generate the handler with PR KVM mode. Signed-off-by: Alexander Graf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index a54d92fec612..cf9c69b9189c 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -267,7 +267,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1202) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202) #endif /* CONFIG_CBE_RAS */ STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint) @@ -275,7 +275,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1602) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602) #endif /* CONFIG_CBE_RAS */ STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist) @@ -283,7 +283,7 @@ vsx_unavailable_pSeries_1: #ifdef CONFIG_CBE_RAS STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal) - KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_HV, 0x1802) + KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802) #endif /* CONFIG_CBE_RAS */ . = 0x3000 -- cgit v1.2.3 From e94e05eae9a56e4fad93f18a63ae90e7ff02b576 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 8 Nov 2011 21:57:59 +0800 Subject: arm/mxs: fix mmc device adding for mach-mx28evk The merge commit "526b264 Merge branch 'imx/cleanup' into imx/devel" left a duplicated mx28_add_mxs_mmc() call, which causes the problem below during boot. kobject_add_internal failed for mxs-mmc.1 with -EEXIST, don't try to register things with the same name in the same directory. The patch removes this leftover and also change mmc0 adding to align with mmc1. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mx28evk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index ac2316d53d3c..064ec5abaa55 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -471,7 +471,8 @@ static void __init mx28evk_init(void) "mmc0-slot-power"); if (ret) pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + else + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power"); @@ -480,7 +481,6 @@ static void __init mx28evk_init(void) else mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); gpio_led_register_device(0, &mx28evk_led_data); -- cgit v1.2.3 From eca55f4d9c1d918c2aa95fb8a73a34e2ba8a1b11 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 8 Nov 2011 13:07:36 +0000 Subject: ARM: msm: fix compilation flags for MSM_SCM CONFIG_MSM_SCM uses the smc instruction, which with some toolchains requires a ".arch_extension" directive. Cc: David Brown Signed-off-by: Marc Zyngier Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 ++ arch/arm/mach-msm/scm.c | 3 +++ 2 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4285dfd80b6f..4ad3969b9881 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o +CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) + obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c index 232f97a04504..bafabb502580 100644 --- a/arch/arm/mach-msm/scm.c +++ b/arch/arm/mach-msm/scm.c @@ -180,6 +180,9 @@ static u32 smc(u32 cmd_addr) __asmeq("%1", "r0") __asmeq("%2", "r1") __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif "smc #0 @ switch to secure world\n" : "=r" (r0) : "r" (r0), "r" (r1), "r" (r2) -- cgit v1.2.3 From 24ed6ddd9cbf084f1a2dfa3ef66287e5277002e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 25 Oct 2011 21:14:10 +0200 Subject: m68k: Revive lost ARAnyM config options commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the ARAnyM config options. Re-add them to the "Platform devices" section. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/Kconfig.devices | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'arch') diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index d214034be6a6..6033f5d4e67e 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -24,6 +24,37 @@ config PROC_HARDWARE including the model, CPU, MMU, clock speed, BogoMIPS rating, and memory size. +config NATFEAT + bool "ARAnyM emulator support" + depends on ATARI + help + This option enables support for ARAnyM native features, such as + access to a disk image as /dev/hda. + +config NFBLOCK + tristate "NatFeat block device support" + depends on BLOCK && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat block device + which allows direct access to the hard drives without using + the hardware emulation. + +config NFCON + tristate "NatFeat console driver" + depends on NATFEAT + help + Say Y to include support for the ARAnyM NatFeat console driver + which allows the console output to be redirected to the stderr + output of ARAnyM. + +config NFETH + tristate "NatFeat Ethernet support" + depends on ETHERNET && NATFEAT + help + Say Y to include support for the ARAnyM NatFeat network device + which will emulate a regular ethernet device while presenting an + ethertap device to the host system. + endmenu menu "Character devices" -- cgit v1.2.3 From 59433a59b073b88cb32efd03af8ac9b13d56f4cf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 28 Oct 2011 22:37:21 +0200 Subject: m68k: Revive lost DIO bus config option commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the DIO bus config option. Re-add it to the "Bus support" section. Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig.bus | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index 8294f0c1785e..3adb499584fb 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -2,6 +2,15 @@ if MMU comment "Bus Support" +config DIO + bool "DIO bus support" + depends on HP300 + default y + help + Say Y here to enable support for the "DIO" expansion bus used in + HP300 machines. If you are using such a system you almost certainly + want this. + config NUBUS bool depends on MAC -- cgit v1.2.3 From c288bf2533e57174b90b07860c4391bcd1ea269c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Apr 2011 22:31:28 +0200 Subject: m68k/irq: Rename irq_controller to irq_chip Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/amiga/amiints.c | 9 +++-- arch/m68k/amiga/cia.c | 18 +++++----- arch/m68k/apollo/dn_ints.c | 11 +++--- arch/m68k/atari/ataints.c | 15 ++++---- arch/m68k/include/asm/irq.h | 15 ++++---- arch/m68k/kernel/ints.c | 86 ++++++++++++++++++++++----------------------- arch/m68k/mac/macints.c | 9 +++-- arch/m68k/q40/q40ints.c | 17 +++++---- arch/m68k/sun3/sun3ints.c | 13 ++++--- 9 files changed, 91 insertions(+), 102 deletions(-) (limited to 'arch') diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c5b5212cc3f9..320c5d048dc7 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -52,11 +52,10 @@ static irqreturn_t ami_int3(int irq, void *dev_id); static irqreturn_t ami_int4(int irq, void *dev_id); static irqreturn_t ami_int5(int irq, void *dev_id); -static struct irq_controller amiga_irq_controller = { +static struct irq_chip amiga_irq_chip = { .name = "amiga", - .lock = __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock), - .enable = amiga_enable_irq, - .disable = amiga_disable_irq, + .irq_enable = amiga_enable_irq, + .irq_disable = amiga_disable_irq, }; /* @@ -81,7 +80,7 @@ void __init amiga_init_IRQ(void) if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) pr_err("Couldn't register int%d\n", 5); - m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS); + m68k_setup_irq_chip(&amiga_irq_chip, IRQ_USER, AMI_STD_IRQS); /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index ecd0f7ca6f0e..637ef53112b6 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -121,11 +121,10 @@ static void cia_disable_irq(unsigned int irq) cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA)); } -static struct irq_controller cia_irq_controller = { +static struct irq_chip cia_irq_chip = { .name = "cia", - .lock = __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock), - .enable = cia_enable_irq, - .disable = cia_disable_irq, + .irq_enable = cia_enable_irq, + .irq_disable = cia_disable_irq, }; /* @@ -158,23 +157,22 @@ static void auto_disable_irq(unsigned int irq) } } -static struct irq_controller auto_irq_controller = { +static struct irq_chip auto_irq_chip = { .name = "auto", - .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock), - .enable = auto_enable_irq, - .disable = auto_disable_irq, + .irq_enable = auto_enable_irq, + .irq_disable = auto_disable_irq, }; void __init cia_init_IRQ(struct ciabase *base) { - m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS); + m68k_setup_irq_chip(&cia_irq_chip, base->cia_irq, CIA_IRQS); /* clear any pending interrupt and turn off all interrupts */ cia_set_irq(base, CIA_ICR_ALL); cia_able_irq(base, CIA_ICR_ALL); /* override auto int and install CIA handler */ - m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1); + m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); m68k_irq_startup(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 5d47f3aa3810..d6e8f33466be 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -12,7 +12,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(picb)=0x20; } -int apollo_irq_startup(unsigned int irq) +unsigned int apollo_irq_startup(unsigned int irq) { if (irq < 8) *(volatile unsigned char *)(pica+1) &= ~(1 << irq); @@ -29,16 +29,15 @@ void apollo_irq_shutdown(unsigned int irq) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } -static struct irq_controller apollo_irq_controller = { +static struct irq_chip apollo_irq_chip = { .name = "apollo", - .lock = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock), - .startup = apollo_irq_startup, - .shutdown = apollo_irq_shutdown, + .irq_startup = apollo_irq_startup, + .irq_shutdown = apollo_irq_shutdown, }; void __init dn_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16); + m68k_setup_irq_chip(&apollo_irq_chip, IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 26a804e67bce..ac0ebdf6ca72 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -320,7 +320,7 @@ extern void atari_microwire_cmd(int cmd); extern int atari_SCC_reset_done; -static int atari_startup_irq(unsigned int irq) +static unsigned int atari_startup_irq(unsigned int irq) { m68k_irq_startup(irq); atari_turnon_irq(irq); @@ -338,13 +338,12 @@ static void atari_shutdown_irq(unsigned int irq) vectors[VEC_INT4] = falcon_hblhandler; } -static struct irq_controller atari_irq_controller = { +static struct irq_chip atari_irq_chip = { .name = "atari", - .lock = __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock), - .startup = atari_startup_irq, - .shutdown = atari_shutdown_irq, - .enable = atari_enable_irq, - .disable = atari_disable_irq, + .irq_startup = atari_startup_irq, + .irq_shutdown = atari_shutdown_irq, + .irq_enable = atari_enable_irq, + .irq_disable = atari_disable_irq, }; /* @@ -361,7 +360,7 @@ static struct irq_controller atari_irq_controller = { void __init atari_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); - m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1); + m68k_setup_irq_chip(&atari_irq_chip, 1, NUM_ATARI_SOURCES - 1); /* Initialize the MFP(s) */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 69ed0d74d532..d8c6f68b7a78 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -93,16 +93,15 @@ struct irq_handler { const char *devname; }; -struct irq_controller { +struct irq_chip { const char *name; - spinlock_t lock; - int (*startup)(unsigned int irq); - void (*shutdown)(unsigned int irq); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); + unsigned int (*irq_startup)(unsigned int irq); + void (*irq_shutdown)(unsigned int irq); + void (*irq_enable)(unsigned int irq); + void (*irq_disable)(unsigned int irq); }; -extern int m68k_irq_startup(unsigned int); +extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* @@ -113,7 +112,7 @@ extern irq_node_t *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int); +extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); asmlinkage void m68k_handle_int(unsigned int); asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 761ee0440c99..f43ad7b93ab6 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -52,23 +52,21 @@ extern u16 user_irqvec_fixup[]; /* table for system interrupt handlers */ static struct irq_node *irq_list[NR_IRQS]; -static struct irq_controller *irq_controller[NR_IRQS]; +static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; static int m68k_first_user_vec; -static struct irq_controller auto_irq_controller = { +static struct irq_chip auto_irq_chip = { .name = "auto", - .lock = __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, }; -static struct irq_controller user_irq_controller = { +static struct irq_chip user_irq_chip = { .name = "user", - .lock = __SPIN_LOCK_UNLOCKED(user_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, }; #define NUM_IRQ_NODES 100 @@ -96,7 +94,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_controller[i] = &auto_irq_controller; + irq_chip[i] = &auto_irq_chip; mach_init_IRQ(); } @@ -136,7 +134,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) - irq_controller[IRQ_USER + i] = &user_irq_controller; + irq_chip[IRQ_USER + i] = &user_irq_chip; *user_irqvec_fixup = vec - IRQ_USER; if (handler) *user_irqhandler_fixup = (u32)handler; @@ -144,7 +142,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, } /** - * m68k_setup_irq_controller + * m68k_setup_irq_chip * @contr: irq controller which controls specified irq * @irq: first irq to be managed by the controller * @@ -153,13 +151,13 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, * be changed as well, but the controller probably should use m68k_irq_startup/ * m68k_irq_shutdown. */ -void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq, +void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, unsigned int cnt) { int i; for (i = 0; i < cnt; i++) - irq_controller[irq + i] = contr; + irq_chip[irq + i] = contr; } irq_node_t *new_irq_node(void) @@ -180,23 +178,23 @@ irq_node_t *new_irq_node(void) int setup_irq(unsigned int irq, struct irq_node *node) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node **prev; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d from %s\n", __func__, irq, node->devname); return -ENXIO; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); prev = irq_list + irq; if (*prev) { /* Can't share interrupts unless both agree to */ if (!((*prev)->flags & node->flags & IRQF_SHARED)) { - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); return -EBUSY; } while (*prev) @@ -204,15 +202,15 @@ int setup_irq(unsigned int irq, struct irq_node *node) } if (!irq_list[irq]) { - if (contr->startup) - contr->startup(irq); + if (contr->irq_startup) + contr->irq_startup(irq); else - contr->enable(irq); + contr->irq_enable(irq); } node->next = NULL; *prev = node; - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); return 0; } @@ -244,16 +242,16 @@ EXPORT_SYMBOL(request_irq); void free_irq(unsigned int irq, void *dev_id) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node **p, *node; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); p = irq_list + irq; while ((node = *p)) { @@ -270,58 +268,58 @@ void free_irq(unsigned int irq, void *dev_id) __func__, irq); if (!irq_list[irq]) { - if (contr->shutdown) - contr->shutdown(irq); + if (contr->irq_shutdown) + contr->irq_shutdown(irq); else - contr->disable(irq); + contr->irq_disable(irq); } - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(free_irq); void enable_irq(unsigned int irq) { - struct irq_controller *contr; + struct irq_chip *contr; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); if (irq_depth[irq]) { if (!--irq_depth[irq]) { - if (contr->enable) - contr->enable(irq); + if (contr->irq_enable) + contr->irq_enable(irq); } } else WARN_ON(1); - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(enable_irq); void disable_irq(unsigned int irq) { - struct irq_controller *contr; + struct irq_chip *contr; unsigned long flags; - if (irq >= NR_IRQS || !(contr = irq_controller[irq])) { + if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { printk("%s: Incorrect IRQ %d\n", __func__, irq); return; } - spin_lock_irqsave(&contr->lock, flags); + local_irq_save(flags); if (!irq_depth[irq]++) { - if (contr->disable) - contr->disable(irq); + if (contr->irq_disable) + contr->irq_disable(irq); } - spin_unlock_irqrestore(&contr->lock, flags); + local_irq_restore(flags); } EXPORT_SYMBOL(disable_irq); @@ -330,7 +328,7 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); -int m68k_irq_startup(unsigned int irq) +unsigned int m68k_irq_startup(unsigned int irq) { if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = auto_inthandler; @@ -413,13 +411,13 @@ asmlinkage void handle_badint(struct pt_regs *regs) int show_interrupts(struct seq_file *p, void *v) { - struct irq_controller *contr; + struct irq_chip *contr; struct irq_node *node; int i = *(loff_t *) v; /* autovector interrupts */ if (irq_list[i]) { - contr = irq_controller[i]; + contr = irq_chip[i]; node = irq_list[i]; seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname); while ((node = node->next)) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index f92190c159b4..ffa1b3f7e2b7 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -193,11 +193,10 @@ irqreturn_t mac_debug_handler(int, void *); void mac_enable_irq(unsigned int irq); void mac_disable_irq(unsigned int irq); -static struct irq_controller mac_irq_controller = { +static struct irq_chip mac_irq_chip = { .name = "mac", - .lock = __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock), - .enable = mac_enable_irq, - .disable = mac_disable_irq, + .irq_enable = mac_enable_irq, + .irq_disable = mac_disable_irq, }; void __init mac_init_IRQ(void) @@ -205,7 +204,7 @@ void __init mac_init_IRQ(void) #ifdef DEBUG_MACINTS printk("mac_init_IRQ(): Setting things up...\n"); #endif - m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER, + m68k_setup_irq_chip(&mac_irq_chip, IRQ_USER, NUM_MAC_SOURCES - IRQ_USER); /* Make sure the SONIC interrupt is cleared or things get ugly */ #ifdef SHUTUP_SONIC diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index 9f0e3d59bf92..fa05a03f8dfe 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -41,14 +41,14 @@ static void q40_disable_irq(unsigned int); unsigned short q40_ablecount[35]; unsigned short q40_state[35]; -static int q40_irq_startup(unsigned int irq) +static unsigned int q40_irq_startup(unsigned int irq) { /* test for ISA ints not implemented by HW */ switch (irq) { case 1: case 2: case 8: case 9: case 11: case 12: case 13: printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq); - return -ENXIO; + /* FIXME return -ENXIO; */ } return 0; } @@ -57,13 +57,12 @@ static void q40_irq_shutdown(unsigned int irq) { } -static struct irq_controller q40_irq_controller = { +static struct irq_chip q40_irq_chip = { .name = "q40", - .lock = __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock), - .startup = q40_irq_startup, - .shutdown = q40_irq_shutdown, - .enable = q40_enable_irq, - .disable = q40_disable_irq, + .irq_startup = q40_irq_startup, + .irq_shutdown = q40_irq_shutdown, + .irq_enable = q40_enable_irq, + .irq_disable = q40_disable_irq, }; /* @@ -81,7 +80,7 @@ static int disabled; void __init q40_init_IRQ(void) { - m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX); + m68k_setup_irq_chip(&q40_irq_chip, 1, Q40_IRQ_MAX); /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 6464ad3ae3e6..97fa9edc5a9d 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -86,13 +86,12 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) __m68k_handle_int(irq, fp); } -static struct irq_controller sun3_irq_controller = { +static struct irq_chip sun3_irq_chip = { .name = "sun3", - .lock = __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock), - .startup = m68k_irq_startup, - .shutdown = m68k_irq_shutdown, - .enable = sun3_enable_irq, - .disable = sun3_disable_irq, + .irq_startup = m68k_irq_startup, + .irq_shutdown = m68k_irq_shutdown, + .irq_enable = sun3_enable_irq, + .irq_disable = sun3_disable_irq, }; void __init sun3_init_IRQ(void) @@ -100,7 +99,7 @@ void __init sun3_init_IRQ(void) *sun3_intreg = 1; m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7); + m68k_setup_irq_chip(&sun3_irq_chip, IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) -- cgit v1.2.3 From 0dde595be678c06e7de27c98f45403088f1b126a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 21:39:08 +0200 Subject: m68k/irq: Kill irq_node_t typedef, always use struct irq_node Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/include/asm/irq.h | 8 ++++---- arch/m68k/kernel/ints.c | 6 +++--- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d8c6f68b7a78..bfc521f35bdf 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -75,13 +75,13 @@ struct pt_regs; * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). */ -typedef struct irq_node { +struct irq_node { irqreturn_t (*handler)(int, void *); void *dev_id; struct irq_node *next; unsigned long flags; const char *devname; -} irq_node_t; +}; /* * This structure has only 4 elements for speed reasons @@ -105,9 +105,9 @@ extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* - * This function returns a new irq_node_t + * This function returns a new struct irq_node */ -extern irq_node_t *new_irq_node(void); +extern struct irq_node *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index f43ad7b93ab6..9de8eb4eaefb 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -70,7 +70,7 @@ static struct irq_chip user_irq_chip = { }; #define NUM_IRQ_NODES 100 -static irq_node_t nodes[NUM_IRQ_NODES]; +static struct irq_node nodes[NUM_IRQ_NODES]; /* * void init_IRQ(void) @@ -160,9 +160,9 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, irq_chip[irq + i] = contr; } -irq_node_t *new_irq_node(void) +struct irq_node *new_irq_node(void) { - irq_node_t *node; + struct irq_node *node; short i; for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { -- cgit v1.2.3 From 6549d537922da6a6893e9bc1be9c2b89db663719 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 21:59:23 +0200 Subject: m68k/irq: Rename irq_node to irq_data Make it more similar to the genirq version: - Add an irq field Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/include/asm/irq.h | 9 +++++---- arch/m68k/kernel/ints.c | 21 +++++++++++---------- 2 files changed, 16 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index bfc521f35bdf..3cb037c36d10 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -75,10 +75,11 @@ struct pt_regs; * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). */ -struct irq_node { +struct irq_data { + unsigned int irq; irqreturn_t (*handler)(int, void *); void *dev_id; - struct irq_node *next; + struct irq_data *next; unsigned long flags; const char *devname; }; @@ -105,9 +106,9 @@ extern unsigned int m68k_irq_startup(unsigned int); extern void m68k_irq_shutdown(unsigned int); /* - * This function returns a new struct irq_node + * This function returns a new struct irq_data */ -extern struct irq_node *new_irq_node(void); +extern struct irq_data *new_irq_node(void); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 9de8eb4eaefb..88779320d406 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -51,7 +51,7 @@ extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; /* table for system interrupt handlers */ -static struct irq_node *irq_list[NR_IRQS]; +static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; @@ -70,7 +70,7 @@ static struct irq_chip user_irq_chip = { }; #define NUM_IRQ_NODES 100 -static struct irq_node nodes[NUM_IRQ_NODES]; +static struct irq_data nodes[NUM_IRQ_NODES]; /* * void init_IRQ(void) @@ -160,9 +160,9 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, irq_chip[irq + i] = contr; } -struct irq_node *new_irq_node(void) +struct irq_data *new_irq_node(void) { - struct irq_node *node; + struct irq_data *node; short i; for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { @@ -176,10 +176,10 @@ struct irq_node *new_irq_node(void) return NULL; } -int setup_irq(unsigned int irq, struct irq_node *node) +int setup_irq(unsigned int irq, struct irq_data *node) { struct irq_chip *contr; - struct irq_node **prev; + struct irq_data **prev; unsigned long flags; if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { @@ -219,13 +219,14 @@ int request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *devname, void *dev_id) { - struct irq_node *node; + struct irq_data *node; int res; node = new_irq_node(); if (!node) return -ENOMEM; + node->irq = irq; node->handler = handler; node->flags = flags; node->dev_id = dev_id; @@ -243,7 +244,7 @@ EXPORT_SYMBOL(request_irq); void free_irq(unsigned int irq, void *dev_id) { struct irq_chip *contr; - struct irq_node **p, *node; + struct irq_data **p, *node; unsigned long flags; if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { @@ -386,7 +387,7 @@ EXPORT_SYMBOL(irq_canonicalize); asmlinkage void m68k_handle_int(unsigned int irq) { - struct irq_node *node; + struct irq_data *node; kstat_cpu(0).irqs[irq]++; node = irq_list[irq]; do { @@ -412,7 +413,7 @@ asmlinkage void handle_badint(struct pt_regs *regs) int show_interrupts(struct seq_file *p, void *v) { struct irq_chip *contr; - struct irq_node *node; + struct irq_data *node; int i = *(loff_t *) v; /* autovector interrupts */ -- cgit v1.2.3 From e8abf5e73cdb6c034d35ccba1f63a4801cd3dec5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 17 Apr 2011 22:53:04 +0200 Subject: m68k/irq: Switch irq_chip methods to "struct irq_data *data" Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/amiga/amiints.c | 16 ++++++++-------- arch/m68k/amiga/cia.c | 25 ++++++++++++++----------- arch/m68k/apollo/dn_ints.c | 8 ++++++-- arch/m68k/atari/ataints.c | 30 ++++++++++++++++++++++-------- arch/m68k/include/asm/irq.h | 13 +++++++------ arch/m68k/kernel/ints.c | 23 +++++++++++++++-------- arch/m68k/mac/macints.c | 14 ++++++++++++-- arch/m68k/q40/q40ints.c | 28 +++++++++++++++++----------- arch/m68k/sun3/sun3ints.c | 14 ++++++++++++-- 9 files changed, 113 insertions(+), 58 deletions(-) (limited to 'arch') diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 320c5d048dc7..09a695babfe9 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -45,8 +45,8 @@ #include #include -static void amiga_enable_irq(unsigned int irq); -static void amiga_disable_irq(unsigned int irq); +static void amiga_irq_enable(struct irq_data *data); +static void amiga_irq_disable(struct irq_data *data); static irqreturn_t ami_int1(int irq, void *dev_id); static irqreturn_t ami_int3(int irq, void *dev_id); static irqreturn_t ami_int4(int irq, void *dev_id); @@ -54,8 +54,8 @@ static irqreturn_t ami_int5(int irq, void *dev_id); static struct irq_chip amiga_irq_chip = { .name = "amiga", - .irq_enable = amiga_enable_irq, - .irq_disable = amiga_disable_irq, + .irq_enable = amiga_irq_enable, + .irq_disable = amiga_irq_disable, }; /* @@ -102,14 +102,14 @@ void __init amiga_init_IRQ(void) * internal data, that may not be changed by the interrupt at the same time. */ -static void amiga_enable_irq(unsigned int irq) +static void amiga_irq_enable(struct irq_data *data) { - amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER)); + amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER)); } -static void amiga_disable_irq(unsigned int irq) +static void amiga_irq_disable(struct irq_data *data) { - amiga_custom.intena = 1 << (irq - IRQ_USER); + amiga_custom.intena = 1 << (data->irq - IRQ_USER); } /* diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index 637ef53112b6..b04b453718d9 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -98,8 +98,9 @@ static irqreturn_t cia_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static void cia_enable_irq(unsigned int irq) +static void cia_irq_enable(struct irq_data *data) { + unsigned int irq = data->irq; unsigned char mask; if (irq >= IRQ_AMIGA_CIAB) { @@ -113,8 +114,10 @@ static void cia_enable_irq(unsigned int irq) } } -static void cia_disable_irq(unsigned int irq) +static void cia_irq_disable(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq >= IRQ_AMIGA_CIAB) cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB)); else @@ -123,8 +126,8 @@ static void cia_disable_irq(unsigned int irq) static struct irq_chip cia_irq_chip = { .name = "cia", - .irq_enable = cia_enable_irq, - .irq_disable = cia_disable_irq, + .irq_enable = cia_irq_enable, + .irq_disable = cia_irq_disable, }; /* @@ -133,9 +136,9 @@ static struct irq_chip cia_irq_chip = { * into this chain. */ -static void auto_enable_irq(unsigned int irq) +static void auto_irq_enable(struct irq_data *data) { - switch (irq) { + switch (data->irq) { case IRQ_AUTO_2: amiga_custom.intena = IF_SETCLR | IF_PORTS; break; @@ -145,9 +148,9 @@ static void auto_enable_irq(unsigned int irq) } } -static void auto_disable_irq(unsigned int irq) +static void auto_irq_disable(struct irq_data *data) { - switch (irq) { + switch (data->irq) { case IRQ_AUTO_2: amiga_custom.intena = IF_PORTS; break; @@ -159,8 +162,8 @@ static void auto_disable_irq(unsigned int irq) static struct irq_chip auto_irq_chip = { .name = "auto", - .irq_enable = auto_enable_irq, - .irq_disable = auto_disable_irq, + .irq_enable = auto_irq_enable, + .irq_disable = auto_irq_disable, }; void __init cia_init_IRQ(struct ciabase *base) @@ -173,7 +176,7 @@ void __init cia_init_IRQ(struct ciabase *base) /* override auto int and install CIA handler */ m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); - m68k_irq_startup(base->handler_irq); + m68k_irq_startup_irq(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) pr_err("Couldn't register %s interrupt\n", base->name); diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index d6e8f33466be..2bdab498b6c1 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -12,8 +12,10 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(picb)=0x20; } -unsigned int apollo_irq_startup(unsigned int irq) +unsigned int apollo_irq_startup(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq < 8) *(volatile unsigned char *)(pica+1) &= ~(1 << irq); else @@ -21,8 +23,10 @@ unsigned int apollo_irq_startup(unsigned int irq) return 0; } -void apollo_irq_shutdown(unsigned int irq) +void apollo_irq_shutdown(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq < 8) *(volatile unsigned char *)(pica+1) |= (1 << irq); else diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index ac0ebdf6ca72..7f4e5a9b77c5 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -320,30 +320,44 @@ extern void atari_microwire_cmd(int cmd); extern int atari_SCC_reset_done; -static unsigned int atari_startup_irq(unsigned int irq) +static unsigned int atari_irq_startup(struct irq_data *data) { - m68k_irq_startup(irq); + unsigned int irq = data->irq; + + m68k_irq_startup(data); atari_turnon_irq(irq); atari_enable_irq(irq); return 0; } -static void atari_shutdown_irq(unsigned int irq) +static void atari_irq_shutdown(struct irq_data *data) { + unsigned int irq = data->irq; + atari_disable_irq(irq); atari_turnoff_irq(irq); - m68k_irq_shutdown(irq); + m68k_irq_shutdown(data); if (irq == IRQ_AUTO_4) vectors[VEC_INT4] = falcon_hblhandler; } +static void atari_irq_enable(struct irq_data *data) +{ + atari_enable_irq(data->irq); +} + +static void atari_irq_disable(struct irq_data *data) +{ + atari_disable_irq(data->irq); +} + static struct irq_chip atari_irq_chip = { .name = "atari", - .irq_startup = atari_startup_irq, - .irq_shutdown = atari_shutdown_irq, - .irq_enable = atari_enable_irq, - .irq_disable = atari_disable_irq, + .irq_startup = atari_irq_startup, + .irq_shutdown = atari_irq_shutdown, + .irq_enable = atari_irq_enable, + .irq_disable = atari_irq_disable, }; /* diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 3cb037c36d10..423f064955f2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -96,14 +96,15 @@ struct irq_handler { struct irq_chip { const char *name; - unsigned int (*irq_startup)(unsigned int irq); - void (*irq_shutdown)(unsigned int irq); - void (*irq_enable)(unsigned int irq); - void (*irq_disable)(unsigned int irq); + unsigned int (*irq_startup)(struct irq_data *data); + void (*irq_shutdown)(struct irq_data *data); + void (*irq_enable)(struct irq_data *data); + void (*irq_disable)(struct irq_data *data); }; -extern unsigned int m68k_irq_startup(unsigned int); -extern void m68k_irq_shutdown(unsigned int); +extern unsigned int m68k_irq_startup(struct irq_data *data); +extern unsigned int m68k_irq_startup_irq(unsigned int irq); +extern void m68k_irq_shutdown(struct irq_data *data); /* * This function returns a new struct irq_data diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 88779320d406..404d832f5d35 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -203,9 +203,9 @@ int setup_irq(unsigned int irq, struct irq_data *node) if (!irq_list[irq]) { if (contr->irq_startup) - contr->irq_startup(irq); + contr->irq_startup(node); else - contr->irq_enable(irq); + contr->irq_enable(node); } node->next = NULL; *prev = node; @@ -270,9 +270,9 @@ void free_irq(unsigned int irq, void *dev_id) if (!irq_list[irq]) { if (contr->irq_shutdown) - contr->irq_shutdown(irq); + contr->irq_shutdown(node); else - contr->irq_disable(irq); + contr->irq_disable(node); } local_irq_restore(flags); @@ -295,7 +295,7 @@ void enable_irq(unsigned int irq) if (irq_depth[irq]) { if (!--irq_depth[irq]) { if (contr->irq_enable) - contr->irq_enable(irq); + contr->irq_enable(irq_list[irq]); } } else WARN_ON(1); @@ -318,7 +318,7 @@ void disable_irq(unsigned int irq) local_irq_save(flags); if (!irq_depth[irq]++) { if (contr->irq_disable) - contr->irq_disable(irq); + contr->irq_disable(irq_list[irq]); } local_irq_restore(flags); } @@ -329,7 +329,7 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); -unsigned int m68k_irq_startup(unsigned int irq) +unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = auto_inthandler; @@ -338,8 +338,15 @@ unsigned int m68k_irq_startup(unsigned int irq) return 0; } -void m68k_irq_shutdown(unsigned int irq) +unsigned int m68k_irq_startup(struct irq_data *data) { + return m68k_irq_startup_irq(data->irq); +} + +void m68k_irq_shutdown(struct irq_data *data) +{ + unsigned int irq = data->irq; + if (irq <= IRQ_AUTO_7) vectors[VEC_SPUR + irq] = bad_inthandler; else diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index ffa1b3f7e2b7..3cee6d29cc5d 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -193,10 +193,20 @@ irqreturn_t mac_debug_handler(int, void *); void mac_enable_irq(unsigned int irq); void mac_disable_irq(unsigned int irq); +static void mac_irq_enable(struct irq_data *data) +{ + mac_enable_irq(data->irq); +} + +static void mac_irq_disable(struct irq_data *data) +{ + mac_disable_irq(data->irq); +} + static struct irq_chip mac_irq_chip = { .name = "mac", - .irq_enable = mac_enable_irq, - .irq_disable = mac_disable_irq, + .irq_enable = mac_irq_enable, + .irq_disable = mac_irq_disable, }; void __init mac_init_IRQ(void) diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index fa05a03f8dfe..cb245f972e1a 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -35,14 +35,16 @@ */ static void q40_irq_handler(unsigned int, struct pt_regs *fp); -static void q40_enable_irq(unsigned int); -static void q40_disable_irq(unsigned int); +static void q40_irq_enable(struct irq_data *data); +static void q40_irq_disable(struct irq_data *data); unsigned short q40_ablecount[35]; unsigned short q40_state[35]; -static unsigned int q40_irq_startup(unsigned int irq) +static unsigned int q40_irq_startup(struct irq_data *data) { + unsigned int irq = data->irq; + /* test for ISA ints not implemented by HW */ switch (irq) { case 1: case 2: case 8: case 9: @@ -53,7 +55,7 @@ static unsigned int q40_irq_startup(unsigned int irq) return 0; } -static void q40_irq_shutdown(unsigned int irq) +static void q40_irq_shutdown(struct irq_data *data) { } @@ -61,8 +63,8 @@ static struct irq_chip q40_irq_chip = { .name = "q40", .irq_startup = q40_irq_startup, .irq_shutdown = q40_irq_shutdown, - .irq_enable = q40_enable_irq, - .irq_disable = q40_disable_irq, + .irq_enable = q40_irq_enable, + .irq_disable = q40_irq_disable, }; /* @@ -85,8 +87,8 @@ void __init q40_init_IRQ(void) /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); - m68k_irq_startup(IRQ_AUTO_2); - m68k_irq_startup(IRQ_AUTO_4); + m68k_irq_startup_irq(IRQ_AUTO_2); + m68k_irq_startup_irq(IRQ_AUTO_4); /* now enable some ints.. */ master_outb(1, EXT_ENABLE_REG); /* ISA IRQ 5-15 */ @@ -292,20 +294,24 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) return; } -void q40_enable_irq(unsigned int irq) +void q40_irq_enable(struct irq_data *data) { + unsigned int irq = data->irq; + if (irq >= 5 && irq <= 15) { mext_disabled--; if (mext_disabled > 0) - printk("q40_enable_irq : nested disable/enable\n"); + printk("q40_irq_enable : nested disable/enable\n"); if (mext_disabled == 0) master_outb(1, EXT_ENABLE_REG); } } -void q40_disable_irq(unsigned int irq) +void q40_irq_disable(struct irq_data *data) { + unsigned int irq = data->irq; + /* disable ISA iqs : only do something if the driver has been * verified to be Q40 "compatible" - right now IDE, NE2K * Any driver should not attempt to sleep across disable_irq !! diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 97fa9edc5a9d..5d45e0065d2e 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -86,12 +86,22 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) __m68k_handle_int(irq, fp); } +static void sun3_irq_enable(struct irq_data *data) +{ + sun3_enable_irq(data->irq); +}; + +static void sun3_irq_disable(struct irq_data *data) +{ + sun3_disable_irq(data->irq); +}; + static struct irq_chip sun3_irq_chip = { .name = "sun3", .irq_startup = m68k_irq_startup, .irq_shutdown = m68k_irq_shutdown, - .irq_enable = sun3_enable_irq, - .irq_disable = sun3_disable_irq, + .irq_enable = sun3_irq_enable, + .irq_disable = sun3_irq_disable, }; void __init sun3_init_IRQ(void) -- cgit v1.2.3 From 13d6da35813babaa1bc8c6799b2666191911100e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Apr 2011 20:10:53 +0200 Subject: m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it static It has nothing to do with the standard one in Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/kernel/ints.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 404d832f5d35..e68a3bd5de6e 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -176,7 +176,7 @@ struct irq_data *new_irq_node(void) return NULL; } -int setup_irq(unsigned int irq, struct irq_data *node) +static int m68k_setup_irq(unsigned int irq, struct irq_data *node) { struct irq_chip *contr; struct irq_data **prev; @@ -232,7 +232,7 @@ int request_irq(unsigned int irq, node->dev_id = dev_id; node->devname = devname; - res = setup_irq(irq, node); + res = m68k_setup_irq(irq, node); if (res) node->handler = NULL; -- cgit v1.2.3 From 40a72c8f711bdf8ae3e4f945261ced5432dcac4d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 27 May 2011 22:33:41 +0200 Subject: m68k/irq: Extract irq_set_chip() Signed-off-by: Geert Uytterhoeven Acked-by: Thomas Gleixner --- arch/m68k/kernel/ints.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index e68a3bd5de6e..4f9868e160bd 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -55,6 +55,12 @@ static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; static int irq_depth[NR_IRQS]; +static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) +{ + irq_chip[irq] = chip; + return 0; +} + static int m68k_first_user_vec; static struct irq_chip auto_irq_chip = { @@ -94,7 +100,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_chip[i] = &auto_irq_chip; + irq_set_chip(i, &auto_irq_chip); mach_init_IRQ(); } @@ -134,7 +140,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) - irq_chip[IRQ_USER + i] = &user_irq_chip; + irq_set_chip(IRQ_USER + i, &user_irq_chip); *user_irqvec_fixup = vec - IRQ_USER; if (handler) *user_irqhandler_fixup = (u32)handler; @@ -157,7 +163,7 @@ void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, int i; for (i = 0; i < cnt; i++) - irq_chip[irq + i] = contr; + irq_set_chip(irq + i, contr); } struct irq_data *new_irq_node(void) -- cgit v1.2.3 From edb347256c44366888debb4f9e8477ac700a9026 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Jun 2011 11:15:21 +0200 Subject: m68k/irq: Add m68k_setup_irq_controller() This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 3 ++- arch/m68k/amiga/cia.c | 6 ++++-- arch/m68k/apollo/dn_ints.c | 3 ++- arch/m68k/atari/ataints.c | 3 ++- arch/m68k/include/asm/irq.h | 2 ++ arch/m68k/mac/macints.c | 2 +- arch/m68k/q40/q40ints.c | 3 ++- arch/m68k/sun3/sun3ints.c | 3 ++- 8 files changed, 17 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 09a695babfe9..8af5ea3eea67 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -80,7 +80,8 @@ void __init amiga_init_IRQ(void) if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) pr_err("Couldn't register int%d\n", 5); - m68k_setup_irq_chip(&amiga_irq_chip, IRQ_USER, AMI_STD_IRQS); + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index b04b453718d9..84663ae824ef 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -168,14 +168,16 @@ static struct irq_chip auto_irq_chip = { void __init cia_init_IRQ(struct ciabase *base) { - m68k_setup_irq_chip(&cia_irq_chip, base->cia_irq, CIA_IRQS); + m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq, + base->cia_irq, CIA_IRQS); /* clear any pending interrupt and turn off all interrupts */ cia_set_irq(base, CIA_ICR_ALL); cia_able_irq(base, CIA_ICR_ALL); /* override auto int and install CIA handler */ - m68k_setup_irq_chip(&auto_irq_chip, base->handler_irq, 1); + m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq, + base->handler_irq, 1); m68k_irq_startup_irq(base->handler_irq); if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 2bdab498b6c1..bdc44282fdba 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -43,5 +43,6 @@ static struct irq_chip apollo_irq_chip = { void __init dn_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_chip(&apollo_irq_chip, IRQ_APOLLO, 16); + m68k_setup_irq_controller(&apollo_irq_chip, handle_simple_irq, + IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 7f4e5a9b77c5..6149ff994641 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -374,7 +374,8 @@ static struct irq_chip atari_irq_chip = { void __init atari_init_IRQ(void) { m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); - m68k_setup_irq_chip(&atari_irq_chip, 1, NUM_ATARI_SOURCES - 1); + m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1, + NUM_ATARI_SOURCES - 1); /* Initialize the MFP(s) */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 423f064955f2..d0b7efd1f1e2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -115,6 +115,8 @@ extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, void (*handler)(unsigned int, struct pt_regs *)); extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); +#define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ + m68k_setup_irq_chip((chip), (irq), (cnt)) asmlinkage void m68k_handle_int(unsigned int); asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 3cee6d29cc5d..98497d288a9b 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -214,7 +214,7 @@ void __init mac_init_IRQ(void) #ifdef DEBUG_MACINTS printk("mac_init_IRQ(): Setting things up...\n"); #endif - m68k_setup_irq_chip(&mac_irq_chip, IRQ_USER, + m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER, NUM_MAC_SOURCES - IRQ_USER); /* Make sure the SONIC interrupt is cleared or things get ugly */ #ifdef SHUTUP_SONIC diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index cb245f972e1a..a8a5ce8b18fc 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -82,7 +82,8 @@ static int disabled; void __init q40_init_IRQ(void) { - m68k_setup_irq_chip(&q40_irq_chip, 1, Q40_IRQ_MAX); + m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1, + Q40_IRQ_MAX); /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 5d45e0065d2e..20461278e535 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -109,7 +109,8 @@ void __init sun3_init_IRQ(void) *sun3_intreg = 1; m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_chip(&sun3_irq_chip, IRQ_AUTO_1, 7); + m68k_setup_irq_controller(&sun3_irq_chip, handle_simple_irq, + IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) -- cgit v1.2.3 From 1425df87c25b15400c9f26d57821bcfe01286b2a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 1 Jul 2011 20:39:19 +0200 Subject: m68k/irq: Rename {,__}m68k_handle_int() - Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 24 ++++++++++++------------ arch/m68k/amiga/cia.c | 2 +- arch/m68k/apollo/dn_ints.c | 2 +- arch/m68k/include/asm/irq.h | 4 ++-- arch/m68k/kernel/entry_mm.S | 4 ++-- arch/m68k/kernel/ints.c | 10 +++++----- arch/m68k/mac/baboon.c | 2 +- arch/m68k/mac/oss.c | 4 ++-- arch/m68k/mac/psc.c | 2 +- arch/m68k/mac/via.c | 6 +++--- arch/m68k/q40/q40ints.c | 8 ++++---- arch/m68k/sun3/sun3ints.c | 2 +- 12 files changed, 35 insertions(+), 35 deletions(-) (limited to 'arch') diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 8af5ea3eea67..0daa7fce9df1 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -124,19 +124,19 @@ static irqreturn_t ami_int1(int irq, void *dev_id) /* if serial transmit buffer empty, interrupt */ if (ints & IF_TBE) { amiga_custom.intreq = IF_TBE; - m68k_handle_int(IRQ_AMIGA_TBE); + generic_handle_irq(IRQ_AMIGA_TBE); } /* if floppy disk transfer complete, interrupt */ if (ints & IF_DSKBLK) { amiga_custom.intreq = IF_DSKBLK; - m68k_handle_int(IRQ_AMIGA_DSKBLK); + generic_handle_irq(IRQ_AMIGA_DSKBLK); } /* if software interrupt set, interrupt */ if (ints & IF_SOFT) { amiga_custom.intreq = IF_SOFT; - m68k_handle_int(IRQ_AMIGA_SOFT); + generic_handle_irq(IRQ_AMIGA_SOFT); } return IRQ_HANDLED; } @@ -148,19 +148,19 @@ static irqreturn_t ami_int3(int irq, void *dev_id) /* if a blitter interrupt */ if (ints & IF_BLIT) { amiga_custom.intreq = IF_BLIT; - m68k_handle_int(IRQ_AMIGA_BLIT); + generic_handle_irq(IRQ_AMIGA_BLIT); } /* if a copper interrupt */ if (ints & IF_COPER) { amiga_custom.intreq = IF_COPER; - m68k_handle_int(IRQ_AMIGA_COPPER); + generic_handle_irq(IRQ_AMIGA_COPPER); } /* if a vertical blank interrupt */ if (ints & IF_VERTB) { amiga_custom.intreq = IF_VERTB; - m68k_handle_int(IRQ_AMIGA_VERTB); + generic_handle_irq(IRQ_AMIGA_VERTB); } return IRQ_HANDLED; } @@ -172,25 +172,25 @@ static irqreturn_t ami_int4(int irq, void *dev_id) /* if audio 0 interrupt */ if (ints & IF_AUD0) { amiga_custom.intreq = IF_AUD0; - m68k_handle_int(IRQ_AMIGA_AUD0); + generic_handle_irq(IRQ_AMIGA_AUD0); } /* if audio 1 interrupt */ if (ints & IF_AUD1) { amiga_custom.intreq = IF_AUD1; - m68k_handle_int(IRQ_AMIGA_AUD1); + generic_handle_irq(IRQ_AMIGA_AUD1); } /* if audio 2 interrupt */ if (ints & IF_AUD2) { amiga_custom.intreq = IF_AUD2; - m68k_handle_int(IRQ_AMIGA_AUD2); + generic_handle_irq(IRQ_AMIGA_AUD2); } /* if audio 3 interrupt */ if (ints & IF_AUD3) { amiga_custom.intreq = IF_AUD3; - m68k_handle_int(IRQ_AMIGA_AUD3); + generic_handle_irq(IRQ_AMIGA_AUD3); } return IRQ_HANDLED; } @@ -202,13 +202,13 @@ static irqreturn_t ami_int5(int irq, void *dev_id) /* if serial receive buffer full interrupt */ if (ints & IF_RBF) { /* acknowledge of IF_RBF must be done by the serial interrupt */ - m68k_handle_int(IRQ_AMIGA_RBF); + generic_handle_irq(IRQ_AMIGA_RBF); } /* if a disk sync interrupt */ if (ints & IF_DSKSYN) { amiga_custom.intreq = IF_DSKSYN; - m68k_handle_int(IRQ_AMIGA_DSKSYN); + generic_handle_irq(IRQ_AMIGA_DSKSYN); } return IRQ_HANDLED; } diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c index 84663ae824ef..18c0e29976e3 100644 --- a/arch/m68k/amiga/cia.c +++ b/arch/m68k/amiga/cia.c @@ -93,7 +93,7 @@ static irqreturn_t cia_handler(int irq, void *dev_id) amiga_custom.intreq = base->int_mask; for (; ints; mach_irq++, ints >>= 1) { if (ints & 1) - m68k_handle_int(mach_irq); + generic_handle_irq(mach_irq); } return IRQ_HANDLED; } diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index bdc44282fdba..4b764312aed0 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -6,7 +6,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) { - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); *(volatile unsigned char *)(pica)=0x20; *(volatile unsigned char *)(picb)=0x20; diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index d0b7efd1f1e2..9a2bae8ef5b7 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -118,8 +118,8 @@ extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); #define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ m68k_setup_irq_chip((chip), (irq), (cnt)) -asmlinkage void m68k_handle_int(unsigned int); -asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *); +extern void generic_handle_irq(unsigned int); +asmlinkage void do_IRQ(int irq, struct pt_regs *regs); #else #define irq_canonicalize(irq) (irq) diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index bd0ec05263b2..f5927d0927b4 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -207,7 +207,7 @@ ENTRY(auto_inthandler) movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack auto_irqhandler_fixup = . + 2 - jsr __m68k_handle_int | process the IRQ + jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack ret_from_interrupt: @@ -241,7 +241,7 @@ user_irqvec_fixup = . + 2 movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack user_irqhandler_fixup = . + 2 - jsr __m68k_handle_int | process the IRQ + jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack subqb #1,%curptr@(TASK_INFO+TINFO_PREEMPT+1) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 4f9868e160bd..15dbbe297334 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -110,7 +110,7 @@ void __init init_IRQ(void) * @handler: called from auto vector interrupts * * setup the handler to be called from auto vector interrupts instead of the - * standard __m68k_handle_int(), it will be called with irq numbers in the range + * standard do_IRQ(), it will be called with irq numbers in the range * from IRQ_AUTO_1 - IRQ_AUTO_7. */ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)) @@ -129,7 +129,7 @@ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re * setup user vector interrupts, this includes activating the specified range * of interrupts, only then these interrupts can be requested (note: this is * different from auto vector interrupts). An optional handler can be installed - * to be called instead of the default __m68k_handle_int(), it will be called + * to be called instead of the default do_IRQ(), it will be called * with irq numbers starting from IRQ_USER. */ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, @@ -398,7 +398,7 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); -asmlinkage void m68k_handle_int(unsigned int irq) +void generic_handle_irq(unsigned int irq) { struct irq_data *node; kstat_cpu(0).irqs[irq]++; @@ -409,11 +409,11 @@ asmlinkage void m68k_handle_int(unsigned int irq) } while (node); } -asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs) +asmlinkage void do_IRQ(int irq, struct pt_regs *regs) { struct pt_regs *old_regs; old_regs = set_irq_regs(regs); - m68k_handle_int(irq); + generic_handle_irq(irq); set_irq_regs(old_regs); } diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index 2a96bebd8969..f264791b8694 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -72,7 +72,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) do { if (events & irq_bit) { baboon->mb_ifr &= ~irq_bit; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } irq_bit <<= 1; irq_num++; diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index a9c0f5ab4cc0..ad512419affc 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -113,7 +113,7 @@ static irqreturn_t oss_irq(int irq, void *dev_id) /* FIXME: call sound handler */ } else if (events & OSS_IP_SCSI) { oss->irq_pending &= ~OSS_IP_SCSI; - m68k_handle_int(IRQ_MAC_SCSI); + generic_handle_irq(IRQ_MAC_SCSI); } else { /* FIXME: error check here? */ } @@ -148,7 +148,7 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) irq_bit >>= 1; if (events & irq_bit) { oss->irq_pending &= ~irq_bit; - m68k_handle_int(NUBUS_SOURCE_BASE + i); + generic_handle_irq(NUBUS_SOURCE_BASE + i); } } while(events & (irq_bit - 1)); return IRQ_HANDLED; diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index a4c3eb60706e..26c2b6595808 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -152,7 +152,7 @@ irqreturn_t psc_irq(int irq, void *dev_id) do { if (events & irq_bit) { psc_write_byte(pIFR, irq_bit); - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } irq_num++; irq_bit <<= 1; diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index e71166daec6a..067857046137 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -460,7 +460,7 @@ irqreturn_t via1_irq(int irq, void *dev_id) do { if (events & irq_bit) { via1[vIFR] = irq_bit; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } ++irq_num; irq_bit <<= 1; @@ -482,7 +482,7 @@ irqreturn_t via2_irq(int irq, void *dev_id) do { if (events & irq_bit) { via2[gIFR] = irq_bit | rbv_clear; - m68k_handle_int(irq_num); + generic_handle_irq(irq_num); } ++irq_num; irq_bit <<= 1; @@ -514,7 +514,7 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) do { if (events & slot_bit) { events &= ~slot_bit; - m68k_handle_int(slot_irq); + generic_handle_irq(slot_irq); } --slot_irq; slot_bit >>= 1; diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index a8a5ce8b18fc..afe600c03659 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -220,11 +220,11 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) switch (irq) { case 4: case 6: - __m68k_handle_int(Q40_IRQ_SAMPLE, fp); + do_IRQ(Q40_IRQ_SAMPLE, fp); return; } if (mir & Q40_IRQ_FRAME_MASK) { - __m68k_handle_int(Q40_IRQ_FRAME, fp); + do_IRQ(Q40_IRQ_FRAME, fp); master_outb(-1, FRAME_CLEAR_REG); } if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) { @@ -259,7 +259,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) goto iirq; } q40_state[irq] |= IRQ_INPROGRESS; - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); q40_state[irq] &= ~IRQ_INPROGRESS; /* naively enable everything, if that fails than */ @@ -290,7 +290,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp) mir = master_inb(IIRQ_REG); /* should test whether keyboard irq is really enabled, doing it in defhand */ if (mir & Q40_IRQ_KEYB_MASK) - __m68k_handle_int(Q40_IRQ_KEYBOARD, fp); + do_IRQ(Q40_IRQ_KEYBOARD, fp); return; } diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 20461278e535..20ffee7dc319 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -83,7 +83,7 @@ static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) { *sun3_intreg &= ~(1 << irq); - __m68k_handle_int(irq, fp); + do_IRQ(irq, fp); } static void sun3_irq_enable(struct irq_data *data) -- cgit v1.2.3 From 5a2394534b160ce18f9a705cf9de40e77648f8a2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 22:33:13 +0200 Subject: m68k/irq: Remove obsolete IRQ_FLG_* users The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 29 ----------------------------- arch/m68k/hp300/time.c | 2 +- arch/m68k/kernel/ints.c | 19 ------------------- arch/m68k/mac/iop.c | 10 ++++------ arch/m68k/mac/oss.c | 13 +++++-------- arch/m68k/mac/via.c | 22 ++++++++-------------- arch/m68k/mvme147/config.c | 3 +-- drivers/macintosh/via-macii.c | 2 +- drivers/macintosh/via-maciisi.c | 4 ++-- 9 files changed, 22 insertions(+), 82 deletions(-) (limited to 'arch') diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index 0daa7fce9df1..e5f3033499e7 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -4,35 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. - * - * 11/07/96: rewritten interrupt handling, irq lists are exists now only for - * this sources where it makes sense (VERTB/PORTS/EXTER) and you must - * be careful that dev_id for this sources is unique since this the - * only possibility to distinguish between different handlers for - * free_irq. irq lists also have different irq flags: - * - IRQ_FLG_FAST: handler is inserted at top of list (after other - * fast handlers) - * - IRQ_FLG_SLOW: handler is inserted at bottom of list and before - * they're executed irq level is set to the previous - * one, but handlers don't need to be reentrant, if - * reentrance occurred, slow handlers will be just - * called again. - * The whole interrupt handling for CIAs is moved to cia.c - * /Roman Zippel - * - * 07/08/99: rewamp of the interrupt handling - we now have two types of - * interrupts, normal and fast handlers, fast handlers being - * marked with IRQF_DISABLED and runs with all other interrupts - * disabled. Normal interrupts disable their own source but - * run with all other interrupt sources enabled. - * PORTS and EXTER interrupts are always shared even if the - * drivers do not explicitly mark this when calling - * request_irq which they really should do. - * This is similar to the way interrupts are handled on all - * other architectures and makes a ton of sense besides - * having the advantage of making it easier to share - * drivers. - * /Jes */ #include diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c index f6312c7d8727..c87fe69b0728 100644 --- a/arch/m68k/hp300/time.c +++ b/arch/m68k/hp300/time.c @@ -70,7 +70,7 @@ void __init hp300_sched_init(irq_handler_t vector) asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE)); - if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector)) + if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector)) pr_err("Couldn't register timer interrupt\n"); out_8(CLOCKBASE + CLKCR2, 0x1); /* select CR1 */ diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 15dbbe297334..f6a469865125 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -4,25 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. - * - * 07/03/96: Timer initialization, and thus mach_sched_init(), - * removed from request_irq() and moved to init_time(). - * We should therefore consider renaming our add_isr() and - * remove_isr() to request_irq() and free_irq() - * respectively, so they are compliant with the other - * architectures. /Jes - * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls. - * Removed irq list support, if any machine needs an irq server - * it must implement this itself (as it's already done), instead - * only default handler are used with mach_default_handler. - * request_irq got some flags different from other architectures: - * - IRQ_FLG_REPLACE : Replace an existing handler (the default one - * can be replaced without this flag) - * - IRQ_FLG_LOCK : handler can't be replaced - * There are other machine depending flags, see there - * If you want to replace a default handler you should know what - * you're doing, since it might handle different other irq sources - * which must be served /Roman Zippel */ #include diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index 1ad4e9d80eba..a5462cc0bfd6 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -305,15 +305,13 @@ void __init iop_register_interrupts(void) { if (iop_ism_present) { if (oss_present) { - if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, - IRQ_FLG_LOCK, "ISM IOP", - (void *) IOP_NUM_ISM)) + if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0, + "ISM IOP", (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); oss_irq_enable(IRQ_MAC_ADB); } else { - if (request_irq(IRQ_VIA2_0, iop_ism_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP", - (void *) IOP_NUM_ISM)) + if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP", + (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); } if (!iop_alive(iop_base[IOP_NUM_ISM])) { diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index ad512419affc..1eb60f071007 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -65,17 +65,14 @@ void __init oss_init(void) void __init oss_register_interrupts(void) { - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK, - "scsi", (void *) oss)) + if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK, - "nubus", (void *) oss)) + if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", + (void *)oss)) pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK, - "sound", (void *) oss)) + if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK, - "via1", (void *) via1)) + if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index 067857046137..af9ed33bec14 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -281,7 +281,7 @@ void __init via_init_clock(irq_handler_t func) via1[vT1CL] = MAC_CLOCK_LOW; via1[vT1CH] = MAC_CLOCK_HIGH; - if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func)) + if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func)) pr_err("Couldn't register %s interrupt\n", "timer"); } @@ -292,25 +292,19 @@ void __init via_init_clock(irq_handler_t func) void __init via_register_interrupts(void) { if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "software", - (void *) via1)) + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", + (void *)via1)) pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1", - (void *) via1)) + if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } else { - if (request_irq(IRQ_AUTO_1, via1_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1", - (void *) via1)) + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) pr_err("Couldn't register %s interrupt\n", "via1"); } - if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST, - "via2", (void *) via2)) + if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, - IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2)) + if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", + (void *)via2)) pr_err("Couldn't register %s interrupt\n", "nubus"); } diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c index 6cb9c3a9b6c9..01f2adf3f19f 100644 --- a/arch/m68k/mvme147/config.c +++ b/arch/m68k/mvme147/config.c @@ -114,8 +114,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id) void mvme147_sched_init (irq_handler_t timer_routine) { tick_handler = timer_routine; - if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE, - "timer 1", NULL)) + if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL)) pr_err("Couldn't register timer interrupt\n"); /* Init the clock with a value */ diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c index 817f37a875c9..c9570fcf1cce 100644 --- a/drivers/macintosh/via-macii.c +++ b/drivers/macintosh/via-macii.c @@ -159,7 +159,7 @@ int macii_init(void) err = macii_init_via(); if (err) goto out; - err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB", + err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB", macii_interrupt); if (err) goto out; diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 9ab5b0c34f0d..34d02a91b29f 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -122,8 +122,8 @@ maciisi_init(void) return err; } - if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST, - "ADB", maciisi_interrupt)) { + if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB", + maciisi_interrupt)) { printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB); return -EAGAIN; } -- cgit v1.2.3 From 4936f63cb790e265eb30a1e1630bb90bd6af0e7a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 21 Apr 2011 22:50:52 +0200 Subject: m68k/irq: Add genirq support Disabled on all platforms for now Signed-off-by: Geert Uytterhoeven [v1] Acked-by: Thomas Gleixner --- arch/m68k/Kconfig | 17 ++++++++++++++ arch/m68k/include/asm/hardirq.h | 5 ++++ arch/m68k/include/asm/irq.h | 41 +++++++++++++++++++++++++------- arch/m68k/kernel/Makefile | 9 +++++-- arch/m68k/kernel/ints.c | 52 ++++++++++++++++++++++++++++++++++++++++- 5 files changed, 112 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 6c28582fb98f..a7597e119ab0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -84,6 +84,23 @@ config MMU_SUN3 bool depends on MMU && !MMU_MOTOROLA +config USE_GENERIC_HARDIRQS + bool "Use genirq" + depends on MMU + depends on !AMIGA + depends on !ATARI + depends on !MAC + depends on !APOLLO + depends on !MVME147 + depends on !MVME16x + depends on !BVME6000 + depends on !HP300 + depends on !SUN3X + depends on !Q40 + depends on !SUN3 + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_SHOW + menu "Platform setup" source arch/m68k/Kconfig.cpu diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h index 870e5347155b..db30ed276878 100644 --- a/arch/m68k/include/asm/hardirq.h +++ b/arch/m68k/include/asm/hardirq.h @@ -18,6 +18,11 @@ #ifdef CONFIG_MMU +static inline void ack_bad_irq(unsigned int irq) +{ + pr_crit("unexpected IRQ trap at vector %02x\n", irq); +} + /* entry.S is sensitive to the offsets of these fields */ typedef struct { unsigned int __softirq_pending; diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 9a2bae8ef5b7..518e61f2fccb 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -27,11 +27,6 @@ #ifdef CONFIG_MMU -#include -#include -#include -#include - /* * Interrupt source definitions * General interrupt sources are the level 1-7. @@ -54,10 +49,6 @@ #define IRQ_USER 8 -extern unsigned int irq_canonicalize(unsigned int irq); - -struct pt_regs; - /* * various flags for request_irq() - the Amiga now uses the standard * mechanism like all other architectures - IRQF_DISABLED and @@ -71,6 +62,15 @@ struct pt_regs; #define IRQ_FLG_STD (0x8000) /* internally used */ #endif +#ifndef CONFIG_GENERIC_HARDIRQS + +#include +#include +#include +#include + +struct pt_regs; + /* * This structure is used to chain together the ISRs for a particular * interrupt source (if it supports chaining). @@ -121,10 +121,33 @@ extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); extern void generic_handle_irq(unsigned int); asmlinkage void do_IRQ(int irq, struct pt_regs *regs); +#else /* CONFIG_GENERIC_HARDIRQS */ + +struct irq_data; +struct irq_chip; +struct irq_desc; +extern unsigned int m68k_irq_startup(struct irq_data *data); +extern unsigned int m68k_irq_startup_irq(unsigned int irq); +extern void m68k_irq_shutdown(struct irq_data *data); +extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, + struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, + void (*handler)(unsigned int, + struct pt_regs *)); +extern void m68k_setup_irq_controller(struct irq_chip *, + void (*handle)(unsigned int irq, + struct irq_desc *desc), + unsigned int irq, unsigned int cnt); + +#endif /* CONFIG_GENERIC_HARDIRQS */ + +extern unsigned int irq_canonicalize(unsigned int irq); + #else #define irq_canonicalize(irq) (irq) #endif /* CONFIG_MMU */ asmlinkage void do_IRQ(int irq, struct pt_regs *regs); +extern atomic_t irq_err_count; #endif /* _M68K_IRQ_H_ */ diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index e7f0f2e5ad44..141425785c4e 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -9,13 +9,18 @@ extra-y += vmlinux.lds obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ sys_m68k.o syscalltable.o time.o traps.o -obj-$(CONFIG_MMU) += ints.o devres.o vectors.o +obj-$(CONFIG_MMU) += ints.o vectors.o devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o ifndef CONFIG_MMU_SUN3 obj-y += dma.o endif ifndef CONFIG_MMU -obj-y += init_task.o irq.o +obj-y += init_task.o +endif +ifdef CONFIG_GENERIC_HARDIRQS +obj-y += irq.o +else +obj-y += devres.o endif diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index f6a469865125..cea439f9819b 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -31,6 +31,7 @@ extern u32 auto_irqhandler_fixup[]; extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; +#ifndef CONFIG_GENERIC_HARDIRQS /* table for system interrupt handlers */ static struct irq_data *irq_list[NR_IRQS]; static struct irq_chip *irq_chip[NR_IRQS]; @@ -41,6 +42,8 @@ static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) irq_chip[irq] = chip; return 0; } +#define irq_set_chip_and_handler(irq, chip, dummy) irq_set_chip(irq, chip) +#endif /* !CONFIG_GENERIC_HARDIRQS */ static int m68k_first_user_vec; @@ -56,8 +59,10 @@ static struct irq_chip user_irq_chip = { .irq_shutdown = m68k_irq_shutdown, }; +#ifndef CONFIG_GENERIC_HARDIRQS #define NUM_IRQ_NODES 100 static struct irq_data nodes[NUM_IRQ_NODES]; +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* * void init_IRQ(void) @@ -81,7 +86,7 @@ void __init init_IRQ(void) } for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++) - irq_set_chip(i, &auto_irq_chip); + irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq); mach_init_IRQ(); } @@ -128,6 +133,35 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, flush_icache(); } +#ifdef CONFIG_GENERIC_HARDIRQS + +/** + * m68k_setup_irq_controller + * @chip: irq chip which controls specified irq + * @handle: flow handler which handles specified irq + * @irq: first irq to be managed by the controller + * @cnt: number of irqs to be managed by the controller + * + * Change the controller for the specified range of irq, which will be used to + * manage these irq. auto/user irq already have a default controller, which can + * be changed as well, but the controller probably should use m68k_irq_startup/ + * m68k_irq_shutdown. + */ +void m68k_setup_irq_controller(struct irq_chip *chip, + irq_flow_handler_t handle, unsigned int irq, + unsigned int cnt) +{ + int i; + + for (i = 0; i < cnt; i++) { + irq_set_chip(irq + i, chip); + if (handle) + irq_set_handler(irq + i, handle); + } +} + +#else /* !CONFIG_GENERIC_HARDIRQS */ + /** * m68k_setup_irq_chip * @contr: irq controller which controls specified irq @@ -316,6 +350,8 @@ void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); EXPORT_SYMBOL(disable_irq_nosync); +#endif /* !CONFIG_GENERIC_HARDIRQS */ + unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) @@ -341,6 +377,8 @@ void m68k_irq_shutdown(struct irq_data *data) } +#ifndef CONFIG_GENERIC_HARDIRQS + /* * Do we need these probe functions on the m68k? * @@ -367,6 +405,7 @@ int probe_irq_off (unsigned long irqs) } EXPORT_SYMBOL(probe_irq_off); +#endif /* CONFIG_GENERIC_HARDIRQS */ unsigned int irq_canonicalize(unsigned int irq) { @@ -379,6 +418,7 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); +#ifndef CONFIG_GENERIC_HARDIRQS void generic_handle_irq(unsigned int irq) { struct irq_data *node; @@ -428,3 +468,13 @@ void init_irq_proc(void) /* Insert /proc/irq driver here */ } #endif + +#else /* CONFIG_GENERIC_HARDIRQS */ + +asmlinkage void handle_badint(struct pt_regs *regs) +{ + atomic_inc(&irq_err_count); + pr_warn("unexpected interrupt from %u\n", regs->vector); +} + +#endif /* CONFIG_GENERIC_HARDIRQS */ -- cgit v1.2.3 From e59629ddc6eddbd00e81b4afb814583cfcc4706d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 29 Apr 2011 23:35:21 +0200 Subject: m68k/atari: Convert Atari to genirq Signed-off-by: Geert Uytterhoeven [v1] Acked-by: Thomas Gleixner --- arch/m68k/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index a7597e119ab0..9d60f4004076 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -88,7 +88,6 @@ config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU depends on !AMIGA - depends on !ATARI depends on !MAC depends on !APOLLO depends on !MVME147 -- cgit v1.2.3 From 34971bad3a1511db7b76eeb2337819967a135075 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 19:36:30 +0200 Subject: m68k/atari: Remove code and comments about different irq types This code was obsoleted during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/atari/ataints.c | 236 ---------------------------------------------- 1 file changed, 236 deletions(-) (limited to 'arch') diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 6149ff994641..af544557dd1d 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -60,244 +60,8 @@ * ): Autovector interrupts are 1..7, then follow ST-MFP, * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can * be allocated by atari_register_vme_int(). - * - * Each interrupt can be of three types: - * - * - SLOW: The handler runs with all interrupts enabled, except the one it - * was called by (to avoid reentering). This should be the usual method. - * But it is currently possible only for MFP ints, since only the MFP - * offers an easy way to mask interrupts. - * - * - FAST: The handler runs with all interrupts disabled. This should be used - * only for really fast handlers, that just do actions immediately - * necessary, and let the rest do a bottom half or task queue. - * - * - PRIORITIZED: The handler can be interrupted by higher-level ints - * (greater IPL, no MFP priorities!). This is the method of choice for ints - * which should be slow, but are not from a MFP. - * - * The feature of more than one handler for one int source is still there, but - * only applicable if all handers are of the same type. To not slow down - * processing of ints with only one handler by the chaining feature, the list - * calling function atari_call_irq_list() is only plugged in at the time the - * second handler is registered. - * - * Implementation notes: For fast-as-possible int handling, there are separate - * entry points for each type (slow/fast/prio). The assembler handler calls - * the irq directly in the usual case, no C wrapper is involved. In case of - * multiple handlers, atari_call_irq_list() is registered as handler and calls - * in turn the real irq's. To ease access from assembler level to the irq - * function pointer and accompanying data, these two are stored in a separate - * array, irq_handler[]. The rest of data (type, name) are put into a second - * array, irq_param, that is accessed from C only. For each slow interrupt (32 - * in all) there are separate handler functions, which makes it possible to - * hard-code the MFP register address and value, are necessary to mask the - * int. If there'd be only one generic function, lots of calculations would be - * needed to determine MFP register and int mask from the vector number :-( - * - * Furthermore, slow ints may not lower the IPL below its previous value - * (before the int happened). This is needed so that an int of class PRIO, on - * that this int may be stacked, cannot be reentered. This feature is - * implemented as follows: If the stack frame format is 1 (throwaway), the int - * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level - * 2, which still blocks the HSYNC, but no interrupts of interest. If the - * frame format is 0, the int is nested, and the old IPL value can be found in - * the sr copy in the frame. */ -#if 0 - -#define NUM_INT_SOURCES (8 + NUM_ATARI_SOURCES) - -typedef void (*asm_irq_handler)(void); - -struct irqhandler { - irqreturn_t (*handler)(int, void *, struct pt_regs *); - void *dev_id; -}; - -struct irqparam { - unsigned long flags; - const char *devname; -}; - -/* - * Array with irq's and their parameter data. This array is accessed from low - * level assembler code, so an element size of 8 allows usage of index scaling - * addressing mode. - */ -static struct irqhandler irq_handler[NUM_INT_SOURCES]; - -/* - * This array hold the rest of parameters of int handlers: type - * (slow,fast,prio) and the name of the handler. These values are only - * accessed from C - */ -static struct irqparam irq_param[NUM_INT_SOURCES]; - -/* check for valid int number (complex, sigh...) */ -#define IS_VALID_INTNO(n) \ - ((n) > 0 && \ - /* autovec and ST-MFP ok anyway */ \ - (((n) < TTMFP_SOURCE_BASE) || \ - /* TT-MFP ok if present */ \ - ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE && \ - ATARIHW_PRESENT(TT_MFP)) || \ - /* SCC ok if present and number even */ \ - ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE && \ - !((n) & 1) && ATARIHW_PRESENT(SCC)) || \ - /* greater numbers ok if they are registered VME vectors */ \ - ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \ - free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE))))) - - -/* - * Here start the assembler entry points for interrupts - */ - -#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void) - -#define BUILD_SLOW_IRQ(n) \ -asmlinkage void IRQ_NAME(n); \ -/* Dummy function to allow asm with operands. */ \ -void atari_slow_irq_##n##_dummy (void) { \ -__asm__ (__ALIGN_STR "\n" \ -"atari_slow_irq_" #n "_handler:\t" \ -" addl %6,%5\n" /* preempt_count() += HARDIRQ_OFFSET */ \ - SAVE_ALL_INT "\n" \ - GET_CURRENT(%%d0) "\n" \ -" andb #~(1<<(%c3&7)),%a4:w\n" /* mask this interrupt */ \ - /* get old IPL from stack frame */ \ -" bfextu %%sp@(%c2){#5,#3},%%d0\n" \ -" movew %%sr,%%d1\n" \ -" bfins %%d0,%%d1{#21,#3}\n" \ -" movew %%d1,%%sr\n" /* set IPL = previous value */ \ -" addql #1,%a0\n" \ -" lea %a1,%%a0\n" \ -" pea %%sp@\n" /* push addr of frame */ \ -" movel %%a0@(4),%%sp@-\n" /* push handler data */ \ -" pea (%c3+8)\n" /* push int number */ \ -" movel %%a0@,%%a0\n" \ -" jbsr %%a0@\n" /* call the handler */ \ -" addql #8,%%sp\n" \ -" addql #4,%%sp\n" \ -" orw #0x0600,%%sr\n" \ -" andw #0xfeff,%%sr\n" /* set IPL = 6 again */ \ -" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \ -" jbra ret_from_interrupt\n" \ - : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \ - "n" (PT_OFF_SR), "n" (n), \ - "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \ - : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \ - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) \ -); \ - for (;;); /* fake noreturn */ \ -} - -BUILD_SLOW_IRQ(0); -BUILD_SLOW_IRQ(1); -BUILD_SLOW_IRQ(2); -BUILD_SLOW_IRQ(3); -BUILD_SLOW_IRQ(4); -BUILD_SLOW_IRQ(5); -BUILD_SLOW_IRQ(6); -BUILD_SLOW_IRQ(7); -BUILD_SLOW_IRQ(8); -BUILD_SLOW_IRQ(9); -BUILD_SLOW_IRQ(10); -BUILD_SLOW_IRQ(11); -BUILD_SLOW_IRQ(12); -BUILD_SLOW_IRQ(13); -BUILD_SLOW_IRQ(14); -BUILD_SLOW_IRQ(15); -BUILD_SLOW_IRQ(16); -BUILD_SLOW_IRQ(17); -BUILD_SLOW_IRQ(18); -BUILD_SLOW_IRQ(19); -BUILD_SLOW_IRQ(20); -BUILD_SLOW_IRQ(21); -BUILD_SLOW_IRQ(22); -BUILD_SLOW_IRQ(23); -BUILD_SLOW_IRQ(24); -BUILD_SLOW_IRQ(25); -BUILD_SLOW_IRQ(26); -BUILD_SLOW_IRQ(27); -BUILD_SLOW_IRQ(28); -BUILD_SLOW_IRQ(29); -BUILD_SLOW_IRQ(30); -BUILD_SLOW_IRQ(31); - -asm_irq_handler slow_handlers[32] = { - [0] = atari_slow_irq_0_handler, - [1] = atari_slow_irq_1_handler, - [2] = atari_slow_irq_2_handler, - [3] = atari_slow_irq_3_handler, - [4] = atari_slow_irq_4_handler, - [5] = atari_slow_irq_5_handler, - [6] = atari_slow_irq_6_handler, - [7] = atari_slow_irq_7_handler, - [8] = atari_slow_irq_8_handler, - [9] = atari_slow_irq_9_handler, - [10] = atari_slow_irq_10_handler, - [11] = atari_slow_irq_11_handler, - [12] = atari_slow_irq_12_handler, - [13] = atari_slow_irq_13_handler, - [14] = atari_slow_irq_14_handler, - [15] = atari_slow_irq_15_handler, - [16] = atari_slow_irq_16_handler, - [17] = atari_slow_irq_17_handler, - [18] = atari_slow_irq_18_handler, - [19] = atari_slow_irq_19_handler, - [20] = atari_slow_irq_20_handler, - [21] = atari_slow_irq_21_handler, - [22] = atari_slow_irq_22_handler, - [23] = atari_slow_irq_23_handler, - [24] = atari_slow_irq_24_handler, - [25] = atari_slow_irq_25_handler, - [26] = atari_slow_irq_26_handler, - [27] = atari_slow_irq_27_handler, - [28] = atari_slow_irq_28_handler, - [29] = atari_slow_irq_29_handler, - [30] = atari_slow_irq_30_handler, - [31] = atari_slow_irq_31_handler -}; - -asmlinkage void atari_fast_irq_handler( void ); -asmlinkage void atari_prio_irq_handler( void ); - -/* Dummy function to allow asm with operands. */ -void atari_fast_prio_irq_dummy (void) { -__asm__ (__ALIGN_STR "\n" -"atari_fast_irq_handler:\n\t" - "orw #0x700,%%sr\n" /* disable all interrupts */ -"atari_prio_irq_handler:\n\t" - "addl %3,%2\n\t" /* preempt_count() += HARDIRQ_OFFSET */ - SAVE_ALL_INT "\n\t" - GET_CURRENT(%%d0) "\n\t" - /* get vector number from stack frame and convert to source */ - "bfextu %%sp@(%c1){#4,#10},%%d0\n\t" - "subw #(0x40-8),%%d0\n\t" - "jpl 1f\n\t" - "addw #(0x40-8-0x18),%%d0\n" - "1:\tlea %a0,%%a0\n\t" - "addql #1,%%a0@(%%d0:l:4)\n\t" - "lea irq_handler,%%a0\n\t" - "lea %%a0@(%%d0:l:8),%%a0\n\t" - "pea %%sp@\n\t" /* push frame address */ - "movel %%a0@(4),%%sp@-\n\t" /* push handler data */ - "movel %%d0,%%sp@-\n\t" /* push int number */ - "movel %%a0@,%%a0\n\t" - "jsr %%a0@\n\t" /* and call the handler */ - "addql #8,%%sp\n\t" - "addql #4,%%sp\n\t" - "jbra ret_from_interrupt" - : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC), - "m" (preempt_count()), "di" (HARDIRQ_OFFSET) -); - for (;;); -} -#endif - /* * Bitmap for free interrupt vector numbers * (new vectors starting from 0x70 can be allocated by -- cgit v1.2.3 From 92b1bd5f1aa88ce4760c02814bfcbb58ad521984 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 31 May 2011 11:11:01 +0200 Subject: m68k/amiga: Refactor amiints.c - Remove filename in comments, - Reorder functions so we no longer need forward declarations. Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 98 +++++++++++++++++++++++------------------------ 1 file changed, 47 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index e5f3033499e7..c8f9eac121a1 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -1,5 +1,5 @@ /* - * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code + * Amiga Linux interrupt handling code * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive @@ -16,56 +16,6 @@ #include #include -static void amiga_irq_enable(struct irq_data *data); -static void amiga_irq_disable(struct irq_data *data); -static irqreturn_t ami_int1(int irq, void *dev_id); -static irqreturn_t ami_int3(int irq, void *dev_id); -static irqreturn_t ami_int4(int irq, void *dev_id); -static irqreturn_t ami_int5(int irq, void *dev_id); - -static struct irq_chip amiga_irq_chip = { - .name = "amiga", - .irq_enable = amiga_irq_enable, - .irq_disable = amiga_irq_disable, -}; - -/* - * void amiga_init_IRQ(void) - * - * Parameters: None - * - * Returns: Nothing - * - * This function should be called during kernel startup to initialize - * the amiga IRQ handling routines. - */ - -void __init amiga_init_IRQ(void) -{ - if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) - pr_err("Couldn't register int%d\n", 1); - if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) - pr_err("Couldn't register int%d\n", 3); - if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) - pr_err("Couldn't register int%d\n", 4); - if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) - pr_err("Couldn't register int%d\n", 5); - - m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, - AMI_STD_IRQS); - - /* turn off PCMCIA interrupts */ - if (AMIGAHW_PRESENT(PCMCIA)) - gayle.inten = GAYLE_IRQ_IDE; - - /* turn off all interrupts and enable the master interrupt bit */ - amiga_custom.intena = 0x7fff; - amiga_custom.intreq = 0x7fff; - amiga_custom.intena = IF_SETCLR | IF_INTEN; - - cia_init_IRQ(&ciaa_base); - cia_init_IRQ(&ciab_base); -} /* * Enable/disable a particular machine specific interrupt source. @@ -84,6 +34,13 @@ static void amiga_irq_disable(struct irq_data *data) amiga_custom.intena = 1 << (data->irq - IRQ_USER); } +static struct irq_chip amiga_irq_chip = { + .name = "amiga", + .irq_enable = amiga_irq_enable, + .irq_disable = amiga_irq_disable, +}; + + /* * The builtin Amiga hardware interrupt handlers. */ @@ -183,3 +140,42 @@ static irqreturn_t ami_int5(int irq, void *dev_id) } return IRQ_HANDLED; } + + +/* + * void amiga_init_IRQ(void) + * + * Parameters: None + * + * Returns: Nothing + * + * This function should be called during kernel startup to initialize + * the amiga IRQ handling routines. + */ + +void __init amiga_init_IRQ(void) +{ + if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) + pr_err("Couldn't register int%d\n", 1); + if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) + pr_err("Couldn't register int%d\n", 3); + if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) + pr_err("Couldn't register int%d\n", 4); + if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) + pr_err("Couldn't register int%d\n", 5); + + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); + + /* turn off PCMCIA interrupts */ + if (AMIGAHW_PRESENT(PCMCIA)) + gayle.inten = GAYLE_IRQ_IDE; + + /* turn off all interrupts and enable the master interrupt bit */ + amiga_custom.intena = 0x7fff; + amiga_custom.intreq = 0x7fff; + amiga_custom.intena = IF_SETCLR | IF_INTEN; + + cia_init_IRQ(&ciaa_base); + cia_init_IRQ(&ciab_base); +} -- cgit v1.2.3 From 978ef7e6d0e02083e4a62ab4411922bdeffa36a4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 31 May 2011 22:08:28 +0200 Subject: m68k/amiga: Convert Amiga to genirq Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 - arch/m68k/amiga/amiints.c | 3 +++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9d60f4004076..9000921385aa 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !AMIGA depends on !MAC depends on !APOLLO depends on !MVME147 diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c8f9eac121a1..c3da5342f495 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -9,6 +9,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include -- cgit v1.2.3 From fb1b646aa3bcae2f8211136a6b40228c7c9d236c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 1 Jun 2011 11:49:18 +0200 Subject: m68k/amiga: Optimize interrupts using chain handlers Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/amiints.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) (limited to 'arch') diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index c3da5342f495..a8da47126584 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -48,6 +48,99 @@ static struct irq_chip amiga_irq_chip = { * The builtin Amiga hardware interrupt handlers. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void ami_int1(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if serial transmit buffer empty, interrupt */ + if (ints & IF_TBE) { + amiga_custom.intreq = IF_TBE; + generic_handle_irq(IRQ_AMIGA_TBE); + } + + /* if floppy disk transfer complete, interrupt */ + if (ints & IF_DSKBLK) { + amiga_custom.intreq = IF_DSKBLK; + generic_handle_irq(IRQ_AMIGA_DSKBLK); + } + + /* if software interrupt set, interrupt */ + if (ints & IF_SOFT) { + amiga_custom.intreq = IF_SOFT; + generic_handle_irq(IRQ_AMIGA_SOFT); + } +} + +static void ami_int3(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if a blitter interrupt */ + if (ints & IF_BLIT) { + amiga_custom.intreq = IF_BLIT; + generic_handle_irq(IRQ_AMIGA_BLIT); + } + + /* if a copper interrupt */ + if (ints & IF_COPER) { + amiga_custom.intreq = IF_COPER; + generic_handle_irq(IRQ_AMIGA_COPPER); + } + + /* if a vertical blank interrupt */ + if (ints & IF_VERTB) { + amiga_custom.intreq = IF_VERTB; + generic_handle_irq(IRQ_AMIGA_VERTB); + } +} + +static void ami_int4(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if audio 0 interrupt */ + if (ints & IF_AUD0) { + amiga_custom.intreq = IF_AUD0; + generic_handle_irq(IRQ_AMIGA_AUD0); + } + + /* if audio 1 interrupt */ + if (ints & IF_AUD1) { + amiga_custom.intreq = IF_AUD1; + generic_handle_irq(IRQ_AMIGA_AUD1); + } + + /* if audio 2 interrupt */ + if (ints & IF_AUD2) { + amiga_custom.intreq = IF_AUD2; + generic_handle_irq(IRQ_AMIGA_AUD2); + } + + /* if audio 3 interrupt */ + if (ints & IF_AUD3) { + amiga_custom.intreq = IF_AUD3; + generic_handle_irq(IRQ_AMIGA_AUD3); + } +} + +static void ami_int5(unsigned int irq, struct irq_desc *desc) +{ + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; + + /* if serial receive buffer full interrupt */ + if (ints & IF_RBF) { + /* acknowledge of IF_RBF must be done by the serial interrupt */ + generic_handle_irq(IRQ_AMIGA_RBF); + } + + /* if a disk sync interrupt */ + if (ints & IF_DSKSYN) { + amiga_custom.intreq = IF_DSKSYN; + generic_handle_irq(IRQ_AMIGA_DSKSYN); + } +} +#else /* !CONFIG_GENERIC_HARDIRQS */ static irqreturn_t ami_int1(int irq, void *dev_id) { unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; @@ -143,6 +236,7 @@ static irqreturn_t ami_int5(int irq, void *dev_id) } return IRQ_HANDLED; } +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* @@ -158,6 +252,15 @@ static irqreturn_t ami_int5(int irq, void *dev_id) void __init amiga_init_IRQ(void) { +#ifdef CONFIG_GENERIC_HARDIRQS + m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, + AMI_STD_IRQS); + + irq_set_chained_handler(IRQ_AUTO_1, ami_int1); + irq_set_chained_handler(IRQ_AUTO_3, ami_int3); + irq_set_chained_handler(IRQ_AUTO_4, ami_int4); + irq_set_chained_handler(IRQ_AUTO_5, ami_int5); +#else /* !CONFIG_GENERIC_HARDIRQS */ if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) pr_err("Couldn't register int%d\n", 1); if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) @@ -169,6 +272,7 @@ void __init amiga_init_IRQ(void) m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, AMI_STD_IRQS); +#endif /* !CONFIG_GENERIC_HARDIRQS */ /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) -- cgit v1.2.3 From ddc7fd25d09678f8252c0321ef4b66e8451abe7d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 21:48:30 +0200 Subject: m68k/mac: Convert Mac to genirq Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 1 - arch/m68k/mac/baboon.c | 3 +++ arch/m68k/mac/oss.c | 3 +++ arch/m68k/mac/psc.c | 3 +++ arch/m68k/mac/via.c | 3 +++ 5 files changed, 12 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9000921385aa..9ba1a89e0032 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !MAC depends on !APOLLO depends on !MVME147 depends on !MVME16x diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index f264791b8694..ff11746b0621 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -11,6 +11,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index 1eb60f071007..ed952704e6ee 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -19,6 +19,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 26c2b6595808..0a34b7afc376 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -18,6 +18,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index af9ed33bec14..bde156caa46d 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -28,6 +28,9 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#endif #include #include -- cgit v1.2.3 From 9145db564eae98134de8eb8d64b47d7177eccfdd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Aug 2011 12:48:29 +0200 Subject: m68k/mac: Optimize interrupts using chain handlers Signed-off-by: Geert Uytterhoeven --- arch/m68k/mac/baboon.c | 38 +++++++++++++ arch/m68k/mac/oss.c | 106 +++++++++++++++++++++++++++++------- arch/m68k/mac/psc.c | 74 +++++++++++++++++++------ arch/m68k/mac/via.c | 143 ++++++++++++++++++++++++++++++++++++++++--------- 4 files changed, 298 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index ff11746b0621..425144cbfa7d 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -56,6 +56,39 @@ void __init baboon_init(void) * Baboon interrupt handler. This works a lot like a VIA. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void baboon_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_bit, irq_num; + unsigned char events; + +#ifdef DEBUG_IRQS + printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n", + (uint) baboon->mb_control, (uint) baboon->mb_ifr, + (uint) baboon->mb_status); +#endif + + events = baboon->mb_ifr & 0x07; + if (!events) + return; + + irq_num = IRQ_BABOON_0; + irq_bit = 1; + do { + if (events & irq_bit) { + baboon->mb_ifr &= ~irq_bit; + generic_handle_irq(irq_num); + } + irq_bit <<= 1; + irq_num++; + } while(events >= irq_bit); +#if 0 + if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL); + /* for now we need to smash all interrupts */ + baboon->mb_ifr &= ~events; +#endif +} +#else static irqreturn_t baboon_irq(int irq, void *dev_id) { int irq_bit, irq_num; @@ -87,6 +120,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) #endif return IRQ_HANDLED; } +#endif /* * Register the Baboon interrupt dispatcher on nubus slot $C. @@ -95,8 +129,12 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) void __init baboon_register_interrupts(void) { baboon_disabled = 0; +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); +#else if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon)) pr_err("Couldn't register baboon interrupt\n"); +#endif } /* diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index ed952704e6ee..cc784c2ff6e8 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -32,10 +32,11 @@ int oss_present; volatile struct mac_oss *oss; -static irqreturn_t oss_irq(int, void *); -static irqreturn_t oss_nubus_irq(int, void *); - +#ifdef CONFIG_GENERIC_HARDIRQS +extern void via1_irq(unsigned int irq, struct irq_desc *desc); +#else extern irqreturn_t via1_irq(int, void *); +#endif /* * Initialize the OSS @@ -62,23 +63,6 @@ void __init oss_init(void) oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1; } -/* - * Register the OSS and NuBus interrupt dispatchers. - */ - -void __init oss_register_interrupts(void) -{ - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", - (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); -} - /* * Initialize OSS for Nubus access */ @@ -92,6 +76,34 @@ void __init oss_nubus_init(void) * and SCSI; everything else is routed to its own autovector IRQ. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void oss_irq(unsigned int irq, struct irq_desc *desc) +{ + int events; + + events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); + if (!events) + return; + +#ifdef DEBUG_IRQS + if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { + printk("oss_irq: irq %u events = 0x%04X\n", irq, + (int) oss->irq_pending); + } +#endif + /* FIXME: how do you clear a pending IRQ? */ + + if (events & OSS_IP_SOUND) { + oss->irq_pending &= ~OSS_IP_SOUND; + /* FIXME: call sound handler */ + } else if (events & OSS_IP_SCSI) { + oss->irq_pending &= ~OSS_IP_SCSI; + generic_handle_irq(IRQ_MAC_SCSI); + } else { + /* FIXME: error check here? */ + } +} +#else static irqreturn_t oss_irq(int irq, void *dev_id) { int events; @@ -119,6 +131,7 @@ static irqreturn_t oss_irq(int irq, void *dev_id) } return IRQ_HANDLED; } +#endif /* * Nubus IRQ handler, OSS style @@ -126,6 +139,34 @@ static irqreturn_t oss_irq(int irq, void *dev_id) * Unlike the VIA/RBV this is on its own autovector interrupt level. */ +#ifdef CONFIG_GENERIC_HARDIRQS +static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) +{ + int events, irq_bit, i; + + events = oss->irq_pending & OSS_IP_NUBUS; + if (!events) + return; + +#ifdef DEBUG_NUBUS_INT + if (console_loglevel > 7) { + printk("oss_nubus_irq: events = 0x%04X\n", events); + } +#endif + /* There are only six slots on the OSS, not seven */ + + i = 6; + irq_bit = 0x40; + do { + --i; + irq_bit >>= 1; + if (events & irq_bit) { + oss->irq_pending &= ~irq_bit; + generic_handle_irq(NUBUS_SOURCE_BASE + i); + } + } while(events & (irq_bit - 1)); +} +#else static irqreturn_t oss_nubus_irq(int irq, void *dev_id) { int events, irq_bit, i; @@ -153,6 +194,31 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) } while(events & (irq_bit - 1)); return IRQ_HANDLED; } +#endif + +/* + * Register the OSS and NuBus interrupt dispatchers. + */ + +void __init oss_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); + irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); +#else /* !CONFIG_GENERIC_HARDIRQS */ + if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "scsi"); + if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", + (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "nubus"); + if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) + pr_err("Couldn't register %s interrupt\n", "sound"); + if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); +#endif /* !CONFIG_GENERIC_HARDIRQS */ +} /* * Enable an OSS interrupt diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 0a34b7afc376..52840b8c03b8 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -33,8 +33,6 @@ int psc_present; volatile __u8 *psc; -irqreturn_t psc_irq(int, void *); - /* * Debugging dump, used in various places to see what's going on. */ @@ -115,26 +113,40 @@ void __init psc_init(void) } /* - * Register the PSC interrupt dispatchers for autovector interrupts 3-6. + * PSC interrupt handler. It's a lot like the VIA interrupt handler. */ -void __init psc_register_interrupts(void) +#ifdef CONFIG_GENERIC_HARDIRQS +static void psc_irq(unsigned int irq, struct irq_desc *desc) { - if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) - pr_err("Couldn't register psc%d interrupt\n", 3); - if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) - pr_err("Couldn't register psc%d interrupt\n", 4); - if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) - pr_err("Couldn't register psc%d interrupt\n", 5); - if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) - pr_err("Couldn't register psc%d interrupt\n", 6); -} + unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc); + int pIFR = pIFRbase + offset; + int pIER = pIERbase + offset; + int irq_num; + unsigned char irq_bit, events; -/* - * PSC interrupt handler. It's a lot like the VIA interrupt handler. - */ +#ifdef DEBUG_IRQS + printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n", + irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER)); +#endif -irqreturn_t psc_irq(int irq, void *dev_id) + events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF; + if (!events) + return; + + irq_num = irq << 3; + irq_bit = 1; + do { + if (events & irq_bit) { + psc_write_byte(pIFR, irq_bit); + generic_handle_irq(irq_num); + } + irq_num++; + irq_bit <<= 1; + } while (events >= irq_bit); +} +#else +static irqreturn_t psc_irq(int irq, void *dev_id) { int pIFR = pIFRbase + ((int) dev_id); int pIER = pIERbase + ((int) dev_id); @@ -162,6 +174,34 @@ irqreturn_t psc_irq(int irq, void *dev_id) } while (events >= irq_bit); return IRQ_HANDLED; } +#endif + +/* + * Register the PSC interrupt dispatchers for autovector interrupts 3-6. + */ + +void __init psc_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + irq_set_chained_handler(IRQ_AUTO_3, psc_irq); + irq_set_handler_data(IRQ_AUTO_3, (void *)0x30); + irq_set_chained_handler(IRQ_AUTO_4, psc_irq); + irq_set_handler_data(IRQ_AUTO_4, (void *)0x40); + irq_set_chained_handler(IRQ_AUTO_5, psc_irq); + irq_set_handler_data(IRQ_AUTO_5, (void *)0x50); + irq_set_chained_handler(IRQ_AUTO_6, psc_irq); + irq_set_handler_data(IRQ_AUTO_6, (void *)0x60); +#else /* !CONFIG_GENERIC_HARDIRQS */ + if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) + pr_err("Couldn't register psc%d interrupt\n", 3); + if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) + pr_err("Couldn't register psc%d interrupt\n", 4); + if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) + pr_err("Couldn't register psc%d interrupt\n", 5); + if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) + pr_err("Couldn't register psc%d interrupt\n", 6); +#endif /* !CONFIG_GENERIC_HARDIRQS */ +} void psc_irq_enable(int irq) { int irq_src = IRQ_SRC(irq); diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index bde156caa46d..b8156ac496a0 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -80,9 +80,6 @@ static int gIER,gIFR,gBufA,gBufB; static u8 nubus_disabled; void via_debug_dump(void); -irqreturn_t via1_irq(int, void *); -irqreturn_t via2_irq(int, void *); -irqreturn_t via_nubus_irq(int, void *); void via_irq_enable(int irq); void via_irq_disable(int irq); void via_irq_clear(int irq); @@ -288,29 +285,6 @@ void __init via_init_clock(irq_handler_t func) pr_err("Couldn't register %s interrupt\n", "timer"); } -/* - * Register the interrupt dispatchers for VIA or RBV machines only. - */ - -void __init via_register_interrupts(void) -{ - if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", - (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } else { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } - if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", - (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "nubus"); -} - /* * Debugging dump, used in various places to see what's going on. */ @@ -443,6 +417,49 @@ void __init via_nubus_init(void) * via6522.c :-), disable/pending masks added. */ +#ifdef CONFIG_GENERIC_HARDIRQS +void via1_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_num; + unsigned char irq_bit, events; + + events = via1[vIFR] & via1[vIER] & 0x7F; + if (!events) + return; + + irq_num = VIA1_SOURCE_BASE; + irq_bit = 1; + do { + if (events & irq_bit) { + via1[vIFR] = irq_bit; + generic_handle_irq(irq_num); + } + ++irq_num; + irq_bit <<= 1; + } while (events >= irq_bit); +} + +static void via2_irq(unsigned int irq, struct irq_desc *desc) +{ + int irq_num; + unsigned char irq_bit, events; + + events = via2[gIFR] & via2[gIER] & 0x7F; + if (!events) + return; + + irq_num = VIA2_SOURCE_BASE; + irq_bit = 1; + do { + if (events & irq_bit) { + via2[gIFR] = irq_bit | rbv_clear; + generic_handle_irq(irq_num); + } + ++irq_num; + irq_bit <<= 1; + } while (events >= irq_bit); +} +#else irqreturn_t via1_irq(int irq, void *dev_id) { int irq_num; @@ -486,12 +503,49 @@ irqreturn_t via2_irq(int irq, void *dev_id) } while (events >= irq_bit); return IRQ_HANDLED; } +#endif /* * Dispatch Nubus interrupts. We are called as a secondary dispatch by the * VIA2 dispatcher as a fast interrupt handler. */ +#ifdef CONFIG_GENERIC_HARDIRQS +void via_nubus_irq(unsigned int irq, struct irq_desc *desc) +{ + int slot_irq; + unsigned char slot_bit, events; + + events = ~via2[gBufA] & 0x7F; + if (rbv_present) + events &= via2[rSIER]; + else + events &= ~via2[vDirA]; + if (!events) + return; + + do { + slot_irq = IRQ_NUBUS_F; + slot_bit = 0x40; + do { + if (events & slot_bit) { + events &= ~slot_bit; + generic_handle_irq(slot_irq); + } + --slot_irq; + slot_bit >>= 1; + } while (events); + + /* clear the CA1 interrupt and make certain there's no more. */ + via2[gIFR] = 0x02 | rbv_clear; + events = ~via2[gBufA] & 0x7F; + if (rbv_present) + events &= via2[rSIER]; + else + events &= ~via2[vDirA]; + } while (events); +} +#else irqreturn_t via_nubus_irq(int irq, void *dev_id) { int slot_irq; @@ -527,6 +581,43 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) } while (events); return IRQ_HANDLED; } +#endif + +/* + * Register the interrupt dispatchers for VIA or RBV machines only. + */ + +void __init via_register_interrupts(void) +{ +#ifdef CONFIG_GENERIC_HARDIRQS + if (via_alt_mapping) { + /* software interrupt */ + irq_set_chained_handler(IRQ_AUTO_1, via1_irq); + /* via1 interrupt */ + irq_set_chained_handler(IRQ_AUTO_6, via1_irq); + } else { + irq_set_chained_handler(IRQ_AUTO_1, via1_irq); + } + irq_set_chained_handler(IRQ_AUTO_2, via2_irq); + irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq); +#else + if (via_alt_mapping) { + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", + (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "software"); + if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); + } else { + if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) + pr_err("Couldn't register %s interrupt\n", "via1"); + } + if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) + pr_err("Couldn't register %s interrupt\n", "via2"); + if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", + (void *)via2)) + pr_err("Couldn't register %s interrupt\n", "nubus"); +#endif +} void via_irq_enable(int irq) { int irq_src = IRQ_SRC(irq); -- cgit v1.2.3 From efaf6d28fc768bfa373f7377c4b0484cbdf9f67e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 13 Aug 2011 21:02:22 +0200 Subject: m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq Signed-off-by: Geert Uytterhoeven Cc: Philip Blundell --- arch/m68k/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9ba1a89e0032..e4bd0c974643 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -91,7 +91,6 @@ config USE_GENERIC_HARDIRQS depends on !MVME147 depends on !MVME16x depends on !BVME6000 - depends on !HP300 depends on !SUN3X depends on !Q40 depends on !SUN3 -- cgit v1.2.3 From 6c490c4da4642ec9e7569c8b50a98a22c71ad184 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 13 Aug 2011 21:11:00 +0200 Subject: m68k/vme: Convert VME to genirq Signed-off-by: Geert Uytterhoeven Cc: Richard Hirst --- arch/m68k/Kconfig | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index e4bd0c974643..8ae37a8fba40 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -88,9 +88,6 @@ config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU depends on !APOLLO - depends on !MVME147 - depends on !MVME16x - depends on !BVME6000 depends on !SUN3X depends on !Q40 depends on !SUN3 -- cgit v1.2.3 From bc7485acd09405d9544783d773ee040af4a5c861 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:45:57 +0200 Subject: m68k/apollo: Convert Apollo to genirq Replace the custom user vector interrupt handler that calls do_IRQ() and does an EOI by handle_fasteoi_irq(). Signed-off-by: Geert Uytterhoeven Cc: Peter De Schrijver --- arch/m68k/Kconfig | 1 - arch/m68k/apollo/dn_ints.c | 25 +++++++++++++++++++++++-- 2 files changed, 23 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 8ae37a8fba40..f2dc708d3da9 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !APOLLO depends on !SUN3X depends on !Q40 depends on !SUN3 diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index 4b764312aed0..fc190b34b621 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -1,9 +1,14 @@ #include - +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#else #include +#endif + #include #include +#ifndef CONFIG_GENERIC_HARDIRQS void dn_process_int(unsigned int irq, struct pt_regs *fp) { do_IRQ(irq, fp); @@ -11,6 +16,7 @@ void dn_process_int(unsigned int irq, struct pt_regs *fp) *(volatile unsigned char *)(pica)=0x20; *(volatile unsigned char *)(picb)=0x20; } +#endif unsigned int apollo_irq_startup(struct irq_data *data) { @@ -33,16 +39,31 @@ void apollo_irq_shutdown(struct irq_data *data) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } +#ifdef CONFIG_GENERIC_HARDIRQS +void apollo_irq_eoi(struct irq_data *data) +{ + *(volatile unsigned char *)(pica) = 0x20; + *(volatile unsigned char *)(picb) = 0x20; +} +#endif + static struct irq_chip apollo_irq_chip = { .name = "apollo", .irq_startup = apollo_irq_startup, .irq_shutdown = apollo_irq_shutdown, +#ifdef CONFIG_GENERIC_HARDIRQS + .irq_eoi = apollo_irq_eoi, +#endif }; void __init dn_init_IRQ(void) { +#ifdef CONFIG_GENERIC_HARDIRQS + m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); +#else m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); - m68k_setup_irq_controller(&apollo_irq_chip, handle_simple_irq, +#endif + m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } -- cgit v1.2.3 From 4045513286462a3c12140fac0559f09bcb5e7f10 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 22:46:01 +0200 Subject: m68k/sun3: Use the kstat_irqs_cpu() wrapper Signed-off-by: Geert Uytterhoeven Acked-by: Sam Creasey --- arch/m68k/sun3/sun3ints.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 20ffee7dc319..1273eb879a15 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -51,14 +51,19 @@ void sun3_disable_irq(unsigned int irq) static irqreturn_t sun3_int7(int irq, void *dev_id) { + unsigned int cnt; + *sun3_intreg |= (1 << irq); - if (!(kstat_cpu(0).irqs[irq] % 2000)) - sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]); + cnt = kstat_irqs_cpu(irq, 0); + if (!(cnt % 2000)) + sun3_leds(led_pattern[cnt % 16000 / 2000]); return IRQ_HANDLED; } static irqreturn_t sun3_int5(int irq, void *dev_id) { + unsigned int cnt; + #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -68,8 +73,9 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #endif xtime_update(1); update_process_times(user_mode(get_irq_regs())); - if (!(kstat_cpu(0).irqs[irq] % 20)) - sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]); + cnt = kstat_irqs_cpu(irq, 0); + if (!(cnt % 20)) + sun3_leds(led_pattern[cnt % 160 / 20]); return IRQ_HANDLED; } -- cgit v1.2.3 From dda7535912255015ecf7264c1d6691a09f8ba487 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:46:46 +0200 Subject: m68k/sun3: Convert Sun3/3x to genirq Replace the custom irq handler that masks the irq and calls do_IRQ(), and the unmasking in the individual handlers, by handle_level_irq(). Signed-off-by: Geert Uytterhoeven Cc: Sam Creasey --- arch/m68k/Kconfig | 2 -- arch/m68k/sun3/sun3ints.c | 16 ++++++++++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index f2dc708d3da9..290f9c838b35 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,9 +87,7 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !SUN3X depends on !Q40 - depends on !SUN3 select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 1273eb879a15..626b601931e9 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -53,7 +53,9 @@ static irqreturn_t sun3_int7(int irq, void *dev_id) { unsigned int cnt; +#ifndef CONFIG_GENERIC_HARDIRQS *sun3_intreg |= (1 << irq); +#endif cnt = kstat_irqs_cpu(irq, 0); if (!(cnt % 2000)) sun3_leds(led_pattern[cnt % 16000 / 2000]); @@ -67,7 +69,9 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #ifdef CONFIG_SUN3 intersil_clear(); #endif +#ifndef CONFIG_GENERIC_HARDIRQS *sun3_intreg |= (1 << irq); +#endif #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -85,12 +89,14 @@ static irqreturn_t sun3_vec255(int irq, void *dev_id) return IRQ_HANDLED; } +#ifndef CONFIG_GENERIC_HARDIRQS static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) { *sun3_intreg &= ~(1 << irq); do_IRQ(irq, fp); } +#endif static void sun3_irq_enable(struct irq_data *data) { @@ -108,15 +114,21 @@ static struct irq_chip sun3_irq_chip = { .irq_shutdown = m68k_irq_shutdown, .irq_enable = sun3_irq_enable, .irq_disable = sun3_irq_disable, +#ifdef CONFIG_GENERIC_HARDIRQS + .irq_mask = sun3_irq_disable, + .irq_unmask = sun3_irq_enable, +#endif }; void __init sun3_init_IRQ(void) { *sun3_intreg = 1; +#ifndef CONFIG_GENERIC_HARDIRQS m68k_setup_auto_interrupt(sun3_inthandle); - m68k_setup_irq_controller(&sun3_irq_chip, handle_simple_irq, - IRQ_AUTO_1, 7); +#endif + m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, + 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) -- cgit v1.2.3 From a03010ed9b399fdbc28ac8836e0a6d4b15403f9f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 18 Aug 2011 14:47:16 +0200 Subject: m68k/q40: Convert Q40/Q60 to genirq q40_irq_handler() must be kept to translate ISA IRQs to the range 1-15. q40_probe_irq_o{ff,n}() become unused. Signed-off-by: Geert Uytterhoeven Cc: Richard Zidlicky --- arch/m68k/Kconfig | 1 - arch/m68k/include/asm/q40ints.h | 2 ++ arch/m68k/q40/q40ints.c | 8 +++++++- 3 files changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 290f9c838b35..06198ced2245 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -87,7 +87,6 @@ config MMU_SUN3 config USE_GENERIC_HARDIRQS bool "Use genirq" depends on MMU - depends on !Q40 select HAVE_GENERIC_HARDIRQS select GENERIC_IRQ_SHOW diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h index 3d970afb708f..01cdbb4da465 100644 --- a/arch/m68k/include/asm/q40ints.h +++ b/arch/m68k/include/asm/q40ints.h @@ -25,5 +25,7 @@ #define Q40_IRQ14_MASK (1<<6) #define Q40_IRQ15_MASK (1<<7) +#ifndef CONFIG_GENERIC_HARDIRQS extern unsigned long q40_probe_irq_on (void); extern int q40_probe_irq_off (unsigned long irqs); +#endif diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index afe600c03659..f1e5288f043f 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -15,10 +15,14 @@ #include #include #include +#ifdef CONFIG_GENERIC_HARDIRQS +#include +#else +#include +#endif #include #include -#include #include #include @@ -326,6 +330,7 @@ void q40_irq_disable(struct irq_data *data) } } +#ifndef CONFIG_GENERIC_HARDIRQS unsigned long q40_probe_irq_on(void) { printk("irq probing not working - reconfigure the driver to avoid this\n"); @@ -335,3 +340,4 @@ int q40_probe_irq_off(unsigned long irqs) { return -1; } +#endif -- cgit v1.2.3 From d890d73995257b4e10cdd7d55bad80e34a71ba22 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 11 Sep 2011 11:28:04 +0200 Subject: m68k/irq: Remove obsolete m68k irq framework Signed-off-by: Geert Uytterhoeven --- arch/m68k/Kconfig | 10 +- arch/m68k/amiga/amiints.c | 114 --------------- arch/m68k/apollo/dn_ints.c | 22 --- arch/m68k/include/asm/irq.h | 63 --------- arch/m68k/include/asm/q40ints.h | 5 - arch/m68k/kernel/Makefile | 10 +- arch/m68k/kernel/ints.c | 297 ---------------------------------------- arch/m68k/mac/baboon.c | 41 ------ arch/m68k/mac/oss.c | 78 ----------- arch/m68k/mac/psc.c | 44 ------ arch/m68k/mac/via.c | 104 -------------- arch/m68k/q40/q40ints.c | 16 --- arch/m68k/sun3/sun3ints.c | 20 --- 13 files changed, 4 insertions(+), 820 deletions(-) (limited to 'arch') diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 06198ced2245..361d54019bb0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -4,8 +4,8 @@ config M68K select HAVE_IDE select HAVE_AOUT if MMU select GENERIC_ATOMIC64 if MMU - select HAVE_GENERIC_HARDIRQS if !MMU - select GENERIC_IRQ_SHOW if !MMU + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS config RWSEM_GENERIC_SPINLOCK @@ -84,12 +84,6 @@ config MMU_SUN3 bool depends on MMU && !MMU_MOTOROLA -config USE_GENERIC_HARDIRQS - bool "Use genirq" - depends on MMU - select HAVE_GENERIC_HARDIRQS - select GENERIC_IRQ_SHOW - menu "Platform setup" source arch/m68k/Kconfig.cpu diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c index a8da47126584..47b5f90002ab 100644 --- a/arch/m68k/amiga/amiints.c +++ b/arch/m68k/amiga/amiints.c @@ -9,9 +9,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -48,7 +46,6 @@ static struct irq_chip amiga_irq_chip = { * The builtin Amiga hardware interrupt handlers. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void ami_int1(unsigned int irq, struct irq_desc *desc) { unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; @@ -140,103 +137,6 @@ static void ami_int5(unsigned int irq, struct irq_desc *desc) generic_handle_irq(IRQ_AMIGA_DSKSYN); } } -#else /* !CONFIG_GENERIC_HARDIRQS */ -static irqreturn_t ami_int1(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial transmit buffer empty, interrupt */ - if (ints & IF_TBE) { - amiga_custom.intreq = IF_TBE; - generic_handle_irq(IRQ_AMIGA_TBE); - } - - /* if floppy disk transfer complete, interrupt */ - if (ints & IF_DSKBLK) { - amiga_custom.intreq = IF_DSKBLK; - generic_handle_irq(IRQ_AMIGA_DSKBLK); - } - - /* if software interrupt set, interrupt */ - if (ints & IF_SOFT) { - amiga_custom.intreq = IF_SOFT; - generic_handle_irq(IRQ_AMIGA_SOFT); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int3(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if a blitter interrupt */ - if (ints & IF_BLIT) { - amiga_custom.intreq = IF_BLIT; - generic_handle_irq(IRQ_AMIGA_BLIT); - } - - /* if a copper interrupt */ - if (ints & IF_COPER) { - amiga_custom.intreq = IF_COPER; - generic_handle_irq(IRQ_AMIGA_COPPER); - } - - /* if a vertical blank interrupt */ - if (ints & IF_VERTB) { - amiga_custom.intreq = IF_VERTB; - generic_handle_irq(IRQ_AMIGA_VERTB); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int4(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if audio 0 interrupt */ - if (ints & IF_AUD0) { - amiga_custom.intreq = IF_AUD0; - generic_handle_irq(IRQ_AMIGA_AUD0); - } - - /* if audio 1 interrupt */ - if (ints & IF_AUD1) { - amiga_custom.intreq = IF_AUD1; - generic_handle_irq(IRQ_AMIGA_AUD1); - } - - /* if audio 2 interrupt */ - if (ints & IF_AUD2) { - amiga_custom.intreq = IF_AUD2; - generic_handle_irq(IRQ_AMIGA_AUD2); - } - - /* if audio 3 interrupt */ - if (ints & IF_AUD3) { - amiga_custom.intreq = IF_AUD3; - generic_handle_irq(IRQ_AMIGA_AUD3); - } - return IRQ_HANDLED; -} - -static irqreturn_t ami_int5(int irq, void *dev_id) -{ - unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; - - /* if serial receive buffer full interrupt */ - if (ints & IF_RBF) { - /* acknowledge of IF_RBF must be done by the serial interrupt */ - generic_handle_irq(IRQ_AMIGA_RBF); - } - - /* if a disk sync interrupt */ - if (ints & IF_DSKSYN) { - amiga_custom.intreq = IF_DSKSYN; - generic_handle_irq(IRQ_AMIGA_DSKSYN); - } - return IRQ_HANDLED; -} -#endif /* !CONFIG_GENERIC_HARDIRQS */ /* @@ -252,7 +152,6 @@ static irqreturn_t ami_int5(int irq, void *dev_id) void __init amiga_init_IRQ(void) { -#ifdef CONFIG_GENERIC_HARDIRQS m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, AMI_STD_IRQS); @@ -260,19 +159,6 @@ void __init amiga_init_IRQ(void) irq_set_chained_handler(IRQ_AUTO_3, ami_int3); irq_set_chained_handler(IRQ_AUTO_4, ami_int4); irq_set_chained_handler(IRQ_AUTO_5, ami_int5); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL)) - pr_err("Couldn't register int%d\n", 1); - if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL)) - pr_err("Couldn't register int%d\n", 3); - if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL)) - pr_err("Couldn't register int%d\n", 4); - if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL)) - pr_err("Couldn't register int%d\n", 5); - - m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER, - AMI_STD_IRQS); -#endif /* !CONFIG_GENERIC_HARDIRQS */ /* turn off PCMCIA interrupts */ if (AMIGAHW_PRESENT(PCMCIA)) diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index fc190b34b621..b7d0aa37d199 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -1,23 +1,9 @@ #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#else -#include -#endif #include #include -#ifndef CONFIG_GENERIC_HARDIRQS -void dn_process_int(unsigned int irq, struct pt_regs *fp) -{ - do_IRQ(irq, fp); - - *(volatile unsigned char *)(pica)=0x20; - *(volatile unsigned char *)(picb)=0x20; -} -#endif - unsigned int apollo_irq_startup(struct irq_data *data) { unsigned int irq = data->irq; @@ -39,31 +25,23 @@ void apollo_irq_shutdown(struct irq_data *data) *(volatile unsigned char *)(picb+1) |= (1 << (irq - 8)); } -#ifdef CONFIG_GENERIC_HARDIRQS void apollo_irq_eoi(struct irq_data *data) { *(volatile unsigned char *)(pica) = 0x20; *(volatile unsigned char *)(picb) = 0x20; } -#endif static struct irq_chip apollo_irq_chip = { .name = "apollo", .irq_startup = apollo_irq_startup, .irq_shutdown = apollo_irq_shutdown, -#ifdef CONFIG_GENERIC_HARDIRQS .irq_eoi = apollo_irq_eoi, -#endif }; void __init dn_init_IRQ(void) { -#ifdef CONFIG_GENERIC_HARDIRQS m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); -#else - m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int); -#endif m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 518e61f2fccb..94349a525bc2 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -62,67 +62,6 @@ #define IRQ_FLG_STD (0x8000) /* internally used */ #endif -#ifndef CONFIG_GENERIC_HARDIRQS - -#include -#include -#include -#include - -struct pt_regs; - -/* - * This structure is used to chain together the ISRs for a particular - * interrupt source (if it supports chaining). - */ -struct irq_data { - unsigned int irq; - irqreturn_t (*handler)(int, void *); - void *dev_id; - struct irq_data *next; - unsigned long flags; - const char *devname; -}; - -/* - * This structure has only 4 elements for speed reasons - */ -struct irq_handler { - int (*handler)(int, void *); - unsigned long flags; - void *dev_id; - const char *devname; -}; - -struct irq_chip { - const char *name; - unsigned int (*irq_startup)(struct irq_data *data); - void (*irq_shutdown)(struct irq_data *data); - void (*irq_enable)(struct irq_data *data); - void (*irq_disable)(struct irq_data *data); -}; - -extern unsigned int m68k_irq_startup(struct irq_data *data); -extern unsigned int m68k_irq_startup_irq(unsigned int irq); -extern void m68k_irq_shutdown(struct irq_data *data); - -/* - * This function returns a new struct irq_data - */ -extern struct irq_data *new_irq_node(void); - -extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_irq_chip(struct irq_chip *, unsigned int, unsigned int); -#define m68k_setup_irq_controller(chip, dummy, irq, cnt) \ - m68k_setup_irq_chip((chip), (irq), (cnt)) - -extern void generic_handle_irq(unsigned int); -asmlinkage void do_IRQ(int irq, struct pt_regs *regs); - -#else /* CONFIG_GENERIC_HARDIRQS */ - struct irq_data; struct irq_chip; struct irq_desc; @@ -139,8 +78,6 @@ extern void m68k_setup_irq_controller(struct irq_chip *, struct irq_desc *desc), unsigned int irq, unsigned int cnt); -#endif /* CONFIG_GENERIC_HARDIRQS */ - extern unsigned int irq_canonicalize(unsigned int irq); #else diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h index 01cdbb4da465..22f12c9eb910 100644 --- a/arch/m68k/include/asm/q40ints.h +++ b/arch/m68k/include/asm/q40ints.h @@ -24,8 +24,3 @@ #define Q40_IRQ10_MASK (1<<5) #define Q40_IRQ14_MASK (1<<6) #define Q40_IRQ15_MASK (1<<7) - -#ifndef CONFIG_GENERIC_HARDIRQS -extern unsigned long q40_probe_irq_on (void); -extern int q40_probe_irq_off (unsigned long irqs); -#endif diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 141425785c4e..c5696193281a 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -6,11 +6,10 @@ extra-$(CONFIG_MMU) := head.o extra-$(CONFIG_SUN3) := sun3-head.o extra-y += vmlinux.lds -obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ - sys_m68k.o syscalltable.o time.o traps.o +obj-y := entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \ + signal.o sys_m68k.o syscalltable.o time.o traps.o obj-$(CONFIG_MMU) += ints.o vectors.o -devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o ifndef CONFIG_MMU_SUN3 obj-y += dma.o @@ -18,9 +17,4 @@ endif ifndef CONFIG_MMU obj-y += init_task.o endif -ifdef CONFIG_GENERIC_HARDIRQS -obj-y += irq.o -else -obj-y += devres.o -endif diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index cea439f9819b..e2b056b3a314 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -31,20 +31,6 @@ extern u32 auto_irqhandler_fixup[]; extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; -#ifndef CONFIG_GENERIC_HARDIRQS -/* table for system interrupt handlers */ -static struct irq_data *irq_list[NR_IRQS]; -static struct irq_chip *irq_chip[NR_IRQS]; -static int irq_depth[NR_IRQS]; - -static inline int irq_set_chip(unsigned int irq, struct irq_chip *chip) -{ - irq_chip[irq] = chip; - return 0; -} -#define irq_set_chip_and_handler(irq, chip, dummy) irq_set_chip(irq, chip) -#endif /* !CONFIG_GENERIC_HARDIRQS */ - static int m68k_first_user_vec; static struct irq_chip auto_irq_chip = { @@ -59,11 +45,6 @@ static struct irq_chip user_irq_chip = { .irq_shutdown = m68k_irq_shutdown, }; -#ifndef CONFIG_GENERIC_HARDIRQS -#define NUM_IRQ_NODES 100 -static struct irq_data nodes[NUM_IRQ_NODES]; -#endif /* !CONFIG_GENERIC_HARDIRQS */ - /* * void init_IRQ(void) * @@ -133,8 +114,6 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, flush_icache(); } -#ifdef CONFIG_GENERIC_HARDIRQS - /** * m68k_setup_irq_controller * @chip: irq chip which controls specified irq @@ -160,198 +139,6 @@ void m68k_setup_irq_controller(struct irq_chip *chip, } } -#else /* !CONFIG_GENERIC_HARDIRQS */ - -/** - * m68k_setup_irq_chip - * @contr: irq controller which controls specified irq - * @irq: first irq to be managed by the controller - * - * Change the controller for the specified range of irq, which will be used to - * manage these irq. auto/user irq already have a default controller, which can - * be changed as well, but the controller probably should use m68k_irq_startup/ - * m68k_irq_shutdown. - */ -void m68k_setup_irq_chip(struct irq_chip *contr, unsigned int irq, - unsigned int cnt) -{ - int i; - - for (i = 0; i < cnt; i++) - irq_set_chip(irq + i, contr); -} - -struct irq_data *new_irq_node(void) -{ - struct irq_data *node; - short i; - - for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) { - if (!node->handler) { - memset(node, 0, sizeof(*node)); - return node; - } - } - - printk ("new_irq_node: out of nodes\n"); - return NULL; -} - -static int m68k_setup_irq(unsigned int irq, struct irq_data *node) -{ - struct irq_chip *contr; - struct irq_data **prev; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d from %s\n", - __func__, irq, node->devname); - return -ENXIO; - } - - local_irq_save(flags); - - prev = irq_list + irq; - if (*prev) { - /* Can't share interrupts unless both agree to */ - if (!((*prev)->flags & node->flags & IRQF_SHARED)) { - local_irq_restore(flags); - return -EBUSY; - } - while (*prev) - prev = &(*prev)->next; - } - - if (!irq_list[irq]) { - if (contr->irq_startup) - contr->irq_startup(node); - else - contr->irq_enable(node); - } - node->next = NULL; - *prev = node; - - local_irq_restore(flags); - - return 0; -} - -int request_irq(unsigned int irq, - irq_handler_t handler, - unsigned long flags, const char *devname, void *dev_id) -{ - struct irq_data *node; - int res; - - node = new_irq_node(); - if (!node) - return -ENOMEM; - - node->irq = irq; - node->handler = handler; - node->flags = flags; - node->dev_id = dev_id; - node->devname = devname; - - res = m68k_setup_irq(irq, node); - if (res) - node->handler = NULL; - - return res; -} - -EXPORT_SYMBOL(request_irq); - -void free_irq(unsigned int irq, void *dev_id) -{ - struct irq_chip *contr; - struct irq_data **p, *node; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", __func__, irq); - return; - } - - local_irq_save(flags); - - p = irq_list + irq; - while ((node = *p)) { - if (node->dev_id == dev_id) - break; - p = &node->next; - } - - if (node) { - *p = node->next; - node->handler = NULL; - } else - printk("%s: Removing probably wrong IRQ %d\n", - __func__, irq); - - if (!irq_list[irq]) { - if (contr->irq_shutdown) - contr->irq_shutdown(node); - else - contr->irq_disable(node); - } - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(free_irq); - -void enable_irq(unsigned int irq) -{ - struct irq_chip *contr; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", - __func__, irq); - return; - } - - local_irq_save(flags); - if (irq_depth[irq]) { - if (!--irq_depth[irq]) { - if (contr->irq_enable) - contr->irq_enable(irq_list[irq]); - } - } else - WARN_ON(1); - local_irq_restore(flags); -} - -EXPORT_SYMBOL(enable_irq); - -void disable_irq(unsigned int irq) -{ - struct irq_chip *contr; - unsigned long flags; - - if (irq >= NR_IRQS || !(contr = irq_chip[irq])) { - printk("%s: Incorrect IRQ %d\n", - __func__, irq); - return; - } - - local_irq_save(flags); - if (!irq_depth[irq]++) { - if (contr->irq_disable) - contr->irq_disable(irq_list[irq]); - } - local_irq_restore(flags); -} - -EXPORT_SYMBOL(disable_irq); - -void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq"))); - -EXPORT_SYMBOL(disable_irq_nosync); - -#endif /* !CONFIG_GENERIC_HARDIRQS */ - unsigned int m68k_irq_startup_irq(unsigned int irq) { if (irq <= IRQ_AUTO_7) @@ -377,36 +164,6 @@ void m68k_irq_shutdown(struct irq_data *data) } -#ifndef CONFIG_GENERIC_HARDIRQS - -/* - * Do we need these probe functions on the m68k? - * - * ... may be useful with ISA devices - */ -unsigned long probe_irq_on (void) -{ -#ifdef CONFIG_Q40 - if (MACH_IS_Q40) - return q40_probe_irq_on(); -#endif - return 0; -} - -EXPORT_SYMBOL(probe_irq_on); - -int probe_irq_off (unsigned long irqs) -{ -#ifdef CONFIG_Q40 - if (MACH_IS_Q40) - return q40_probe_irq_off(irqs); -#endif - return 0; -} - -EXPORT_SYMBOL(probe_irq_off); -#endif /* CONFIG_GENERIC_HARDIRQS */ - unsigned int irq_canonicalize(unsigned int irq) { #ifdef CONFIG_Q40 @@ -418,63 +175,9 @@ unsigned int irq_canonicalize(unsigned int irq) EXPORT_SYMBOL(irq_canonicalize); -#ifndef CONFIG_GENERIC_HARDIRQS -void generic_handle_irq(unsigned int irq) -{ - struct irq_data *node; - kstat_cpu(0).irqs[irq]++; - node = irq_list[irq]; - do { - node->handler(irq, node->dev_id); - node = node->next; - } while (node); -} - -asmlinkage void do_IRQ(int irq, struct pt_regs *regs) -{ - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - generic_handle_irq(irq); - set_irq_regs(old_regs); -} - -asmlinkage void handle_badint(struct pt_regs *regs) -{ - kstat_cpu(0).irqs[0]++; - printk("unexpected interrupt from %u\n", regs->vector); -} - -int show_interrupts(struct seq_file *p, void *v) -{ - struct irq_chip *contr; - struct irq_data *node; - int i = *(loff_t *) v; - - /* autovector interrupts */ - if (irq_list[i]) { - contr = irq_chip[i]; - node = irq_list[i]; - seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname); - while ((node = node->next)) - seq_printf(p, ", %s", node->devname); - seq_puts(p, "\n"); - } - return 0; -} - -#ifdef CONFIG_PROC_FS -void init_irq_proc(void) -{ - /* Insert /proc/irq driver here */ -} -#endif - -#else /* CONFIG_GENERIC_HARDIRQS */ asmlinkage void handle_badint(struct pt_regs *regs) { atomic_inc(&irq_err_count); pr_warn("unexpected interrupt from %u\n", regs->vector); } - -#endif /* CONFIG_GENERIC_HARDIRQS */ diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index 425144cbfa7d..b55ead284971 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -11,9 +11,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -56,7 +54,6 @@ void __init baboon_init(void) * Baboon interrupt handler. This works a lot like a VIA. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void baboon_irq(unsigned int irq, struct irq_desc *desc) { int irq_bit, irq_num; @@ -88,39 +85,6 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc) baboon->mb_ifr &= ~events; #endif } -#else -static irqreturn_t baboon_irq(int irq, void *dev_id) -{ - int irq_bit, irq_num; - unsigned char events; - -#ifdef DEBUG_IRQS - printk("baboon_irq: mb_control %02X mb_ifr %02X mb_status %02X\n", - (uint) baboon->mb_control, (uint) baboon->mb_ifr, - (uint) baboon->mb_status); -#endif - - if (!(events = baboon->mb_ifr & 0x07)) - return IRQ_NONE; - - irq_num = IRQ_BABOON_0; - irq_bit = 1; - do { - if (events & irq_bit) { - baboon->mb_ifr &= ~irq_bit; - generic_handle_irq(irq_num); - } - irq_bit <<= 1; - irq_num++; - } while(events >= irq_bit); -#if 0 - if (baboon->mb_ifr & 0x02) macide_ack_intr(NULL); - /* for now we need to smash all interrupts */ - baboon->mb_ifr &= ~events; -#endif - return IRQ_HANDLED; -} -#endif /* * Register the Baboon interrupt dispatcher on nubus slot $C. @@ -129,12 +93,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id) void __init baboon_register_interrupts(void) { baboon_disabled = 0; -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); -#else - if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon)) - pr_err("Couldn't register baboon interrupt\n"); -#endif } /* diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index cc784c2ff6e8..a4c82dab9ff1 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -19,9 +19,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -32,11 +30,7 @@ int oss_present; volatile struct mac_oss *oss; -#ifdef CONFIG_GENERIC_HARDIRQS extern void via1_irq(unsigned int irq, struct irq_desc *desc); -#else -extern irqreturn_t via1_irq(int, void *); -#endif /* * Initialize the OSS @@ -76,7 +70,6 @@ void __init oss_nubus_init(void) * and SCSI; everything else is routed to its own autovector IRQ. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void oss_irq(unsigned int irq, struct irq_desc *desc) { int events; @@ -103,35 +96,6 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc) /* FIXME: error check here? */ } } -#else -static irqreturn_t oss_irq(int irq, void *dev_id) -{ - int events; - - events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); - if (!events) - return IRQ_NONE; - -#ifdef DEBUG_IRQS - if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { - printk("oss_irq: irq %d events = 0x%04X\n", irq, - (int) oss->irq_pending); - } -#endif - /* FIXME: how do you clear a pending IRQ? */ - - if (events & OSS_IP_SOUND) { - oss->irq_pending &= ~OSS_IP_SOUND; - /* FIXME: call sound handler */ - } else if (events & OSS_IP_SCSI) { - oss->irq_pending &= ~OSS_IP_SCSI; - generic_handle_irq(IRQ_MAC_SCSI); - } else { - /* FIXME: error check here? */ - } - return IRQ_HANDLED; -} -#endif /* * Nubus IRQ handler, OSS style @@ -139,7 +103,6 @@ static irqreturn_t oss_irq(int irq, void *dev_id) * Unlike the VIA/RBV this is on its own autovector interrupt level. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) { int events, irq_bit, i; @@ -166,35 +129,6 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) } } while(events & (irq_bit - 1)); } -#else -static irqreturn_t oss_nubus_irq(int irq, void *dev_id) -{ - int events, irq_bit, i; - - events = oss->irq_pending & OSS_IP_NUBUS; - if (!events) - return IRQ_NONE; - -#ifdef DEBUG_NUBUS_INT - if (console_loglevel > 7) { - printk("oss_nubus_irq: events = 0x%04X\n", events); - } -#endif - /* There are only six slots on the OSS, not seven */ - - i = 6; - irq_bit = 0x40; - do { - --i; - irq_bit >>= 1; - if (events & irq_bit) { - oss->irq_pending &= ~irq_bit; - generic_handle_irq(NUBUS_SOURCE_BASE + i); - } - } while(events & (irq_bit - 1)); - return IRQ_HANDLED; -} -#endif /* * Register the OSS and NuBus interrupt dispatchers. @@ -202,22 +136,10 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id) void __init oss_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(OSS_IRQLEV_SCSI, oss_irq, 0, "scsi", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "scsi"); - if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, 0, "nubus", - (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "nubus"); - if (request_irq(OSS_IRQLEV_SOUND, oss_irq, 0, "sound", (void *)oss)) - pr_err("Couldn't register %s interrupt\n", "sound"); - if (request_irq(OSS_IRQLEV_VIA1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); -#endif /* !CONFIG_GENERIC_HARDIRQS */ } /* diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index 52840b8c03b8..e6c2d20f328d 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -18,9 +18,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -116,7 +114,6 @@ void __init psc_init(void) * PSC interrupt handler. It's a lot like the VIA interrupt handler. */ -#ifdef CONFIG_GENERIC_HARDIRQS static void psc_irq(unsigned int irq, struct irq_desc *desc) { unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc); @@ -145,36 +142,6 @@ static void psc_irq(unsigned int irq, struct irq_desc *desc) irq_bit <<= 1; } while (events >= irq_bit); } -#else -static irqreturn_t psc_irq(int irq, void *dev_id) -{ - int pIFR = pIFRbase + ((int) dev_id); - int pIER = pIERbase + ((int) dev_id); - int irq_num; - unsigned char irq_bit, events; - -#ifdef DEBUG_IRQS - printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n", - irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER)); -#endif - - events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF; - if (!events) - return IRQ_NONE; - - irq_num = irq << 3; - irq_bit = 1; - do { - if (events & irq_bit) { - psc_write_byte(pIFR, irq_bit); - generic_handle_irq(irq_num); - } - irq_num++; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} -#endif /* * Register the PSC interrupt dispatchers for autovector interrupts 3-6. @@ -182,7 +149,6 @@ static irqreturn_t psc_irq(int irq, void *dev_id) void __init psc_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS irq_set_chained_handler(IRQ_AUTO_3, psc_irq); irq_set_handler_data(IRQ_AUTO_3, (void *)0x30); irq_set_chained_handler(IRQ_AUTO_4, psc_irq); @@ -191,16 +157,6 @@ void __init psc_register_interrupts(void) irq_set_handler_data(IRQ_AUTO_5, (void *)0x50); irq_set_chained_handler(IRQ_AUTO_6, psc_irq); irq_set_handler_data(IRQ_AUTO_6, (void *)0x60); -#else /* !CONFIG_GENERIC_HARDIRQS */ - if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30)) - pr_err("Couldn't register psc%d interrupt\n", 3); - if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40)) - pr_err("Couldn't register psc%d interrupt\n", 4); - if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50)) - pr_err("Couldn't register psc%d interrupt\n", 5); - if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60)) - pr_err("Couldn't register psc%d interrupt\n", 6); -#endif /* !CONFIG_GENERIC_HARDIRQS */ } void psc_irq_enable(int irq) { diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index b8156ac496a0..f1600ad26621 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -28,9 +28,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#endif #include #include @@ -417,7 +415,6 @@ void __init via_nubus_init(void) * via6522.c :-), disable/pending masks added. */ -#ifdef CONFIG_GENERIC_HARDIRQS void via1_irq(unsigned int irq, struct irq_desc *desc) { int irq_num; @@ -459,58 +456,12 @@ static void via2_irq(unsigned int irq, struct irq_desc *desc) irq_bit <<= 1; } while (events >= irq_bit); } -#else -irqreturn_t via1_irq(int irq, void *dev_id) -{ - int irq_num; - unsigned char irq_bit, events; - - events = via1[vIFR] & via1[vIER] & 0x7F; - if (!events) - return IRQ_NONE; - - irq_num = VIA1_SOURCE_BASE; - irq_bit = 1; - do { - if (events & irq_bit) { - via1[vIFR] = irq_bit; - generic_handle_irq(irq_num); - } - ++irq_num; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} - -irqreturn_t via2_irq(int irq, void *dev_id) -{ - int irq_num; - unsigned char irq_bit, events; - - events = via2[gIFR] & via2[gIER] & 0x7F; - if (!events) - return IRQ_NONE; - - irq_num = VIA2_SOURCE_BASE; - irq_bit = 1; - do { - if (events & irq_bit) { - via2[gIFR] = irq_bit | rbv_clear; - generic_handle_irq(irq_num); - } - ++irq_num; - irq_bit <<= 1; - } while (events >= irq_bit); - return IRQ_HANDLED; -} -#endif /* * Dispatch Nubus interrupts. We are called as a secondary dispatch by the * VIA2 dispatcher as a fast interrupt handler. */ -#ifdef CONFIG_GENERIC_HARDIRQS void via_nubus_irq(unsigned int irq, struct irq_desc *desc) { int slot_irq; @@ -545,43 +496,6 @@ void via_nubus_irq(unsigned int irq, struct irq_desc *desc) events &= ~via2[vDirA]; } while (events); } -#else -irqreturn_t via_nubus_irq(int irq, void *dev_id) -{ - int slot_irq; - unsigned char slot_bit, events; - - events = ~via2[gBufA] & 0x7F; - if (rbv_present) - events &= via2[rSIER]; - else - events &= ~via2[vDirA]; - if (!events) - return IRQ_NONE; - - do { - slot_irq = IRQ_NUBUS_F; - slot_bit = 0x40; - do { - if (events & slot_bit) { - events &= ~slot_bit; - generic_handle_irq(slot_irq); - } - --slot_irq; - slot_bit >>= 1; - } while (events); - - /* clear the CA1 interrupt and make certain there's no more. */ - via2[gIFR] = 0x02 | rbv_clear; - events = ~via2[gBufA] & 0x7F; - if (rbv_present) - events &= via2[rSIER]; - else - events &= ~via2[vDirA]; - } while (events); - return IRQ_HANDLED; -} -#endif /* * Register the interrupt dispatchers for VIA or RBV machines only. @@ -589,7 +503,6 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) void __init via_register_interrupts(void) { -#ifdef CONFIG_GENERIC_HARDIRQS if (via_alt_mapping) { /* software interrupt */ irq_set_chained_handler(IRQ_AUTO_1, via1_irq); @@ -600,23 +513,6 @@ void __init via_register_interrupts(void) } irq_set_chained_handler(IRQ_AUTO_2, via2_irq); irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq); -#else - if (via_alt_mapping) { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "software", - (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "software"); - if (request_irq(IRQ_AUTO_6, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } else { - if (request_irq(IRQ_AUTO_1, via1_irq, 0, "via1", (void *)via1)) - pr_err("Couldn't register %s interrupt\n", "via1"); - } - if (request_irq(IRQ_AUTO_2, via2_irq, 0, "via2", (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "via2"); - if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq, 0, "nubus", - (void *)via2)) - pr_err("Couldn't register %s interrupt\n", "nubus"); -#endif } void via_irq_enable(int irq) { diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c index f1e5288f043f..2b888491f29a 100644 --- a/arch/m68k/q40/q40ints.c +++ b/arch/m68k/q40/q40ints.c @@ -15,11 +15,7 @@ #include #include #include -#ifdef CONFIG_GENERIC_HARDIRQS #include -#else -#include -#endif #include #include @@ -329,15 +325,3 @@ void q40_irq_disable(struct irq_data *data) printk("disable_irq nesting count %d\n",mext_disabled); } } - -#ifndef CONFIG_GENERIC_HARDIRQS -unsigned long q40_probe_irq_on(void) -{ - printk("irq probing not working - reconfigure the driver to avoid this\n"); - return -1; -} -int q40_probe_irq_off(unsigned long irqs) -{ - return -1; -} -#endif diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 626b601931e9..7eb378195cf7 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -53,9 +53,6 @@ static irqreturn_t sun3_int7(int irq, void *dev_id) { unsigned int cnt; -#ifndef CONFIG_GENERIC_HARDIRQS - *sun3_intreg |= (1 << irq); -#endif cnt = kstat_irqs_cpu(irq, 0); if (!(cnt % 2000)) sun3_leds(led_pattern[cnt % 16000 / 2000]); @@ -69,9 +66,6 @@ static irqreturn_t sun3_int5(int irq, void *dev_id) #ifdef CONFIG_SUN3 intersil_clear(); #endif -#ifndef CONFIG_GENERIC_HARDIRQS - *sun3_intreg |= (1 << irq); -#endif #ifdef CONFIG_SUN3 intersil_clear(); #endif @@ -89,15 +83,6 @@ static irqreturn_t sun3_vec255(int irq, void *dev_id) return IRQ_HANDLED; } -#ifndef CONFIG_GENERIC_HARDIRQS -static void sun3_inthandle(unsigned int irq, struct pt_regs *fp) -{ - *sun3_intreg &= ~(1 << irq); - - do_IRQ(irq, fp); -} -#endif - static void sun3_irq_enable(struct irq_data *data) { sun3_enable_irq(data->irq); @@ -114,19 +99,14 @@ static struct irq_chip sun3_irq_chip = { .irq_shutdown = m68k_irq_shutdown, .irq_enable = sun3_irq_enable, .irq_disable = sun3_irq_disable, -#ifdef CONFIG_GENERIC_HARDIRQS .irq_mask = sun3_irq_disable, .irq_unmask = sun3_irq_enable, -#endif }; void __init sun3_init_IRQ(void) { *sun3_intreg = 1; -#ifndef CONFIG_GENERIC_HARDIRQS - m68k_setup_auto_interrupt(sun3_inthandle); -#endif m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, 7); m68k_setup_user_interrupt(VEC_USER, 128, NULL); -- cgit v1.2.3 From f30a6484f1bcb410d0af0c24f34b8e3d92682a05 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 11 Sep 2011 11:54:50 +0200 Subject: m68k/irq: Remove obsolete support for user vector interrupt fixups It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven --- arch/m68k/apollo/dn_ints.c | 2 +- arch/m68k/atari/ataints.c | 2 +- arch/m68k/bvme6000/config.c | 2 +- arch/m68k/include/asm/irq.h | 4 +--- arch/m68k/kernel/entry_mm.S | 3 +-- arch/m68k/kernel/ints.c | 11 ++--------- arch/m68k/mvme147/config.c | 2 +- arch/m68k/mvme16x/config.c | 2 +- arch/m68k/sun3/sun3ints.c | 2 +- 9 files changed, 10 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/m68k/apollo/dn_ints.c b/arch/m68k/apollo/dn_ints.c index b7d0aa37d199..17be1e7e2df2 100644 --- a/arch/m68k/apollo/dn_ints.c +++ b/arch/m68k/apollo/dn_ints.c @@ -41,7 +41,7 @@ static struct irq_chip apollo_irq_chip = { void __init dn_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER + 96, 16, NULL); + m68k_setup_user_interrupt(VEC_USER + 96, 16); m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq, IRQ_APOLLO, 16); } diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index af544557dd1d..6d196dadfdbc 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -137,7 +137,7 @@ static struct irq_chip atari_irq_chip = { void __init atari_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL); + m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER); m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1, NUM_ATARI_SOURCES - 1); diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c index 1edd95095cb4..81286476f740 100644 --- a/arch/m68k/bvme6000/config.c +++ b/arch/m68k/bvme6000/config.c @@ -86,7 +86,7 @@ static void bvme6000_get_model(char *model) */ static void __init bvme6000_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } void __init config_bvme6000(void) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 94349a525bc2..6198df5ff245 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -70,9 +70,7 @@ extern unsigned int m68k_irq_startup_irq(unsigned int irq); extern void m68k_irq_shutdown(struct irq_data *data); extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *)); -extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, - struct pt_regs *)); +extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt); extern void m68k_setup_irq_controller(struct irq_chip *, void (*handle)(unsigned int irq, struct irq_desc *desc), diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S index f5927d0927b4..c713f514843d 100644 --- a/arch/m68k/kernel/entry_mm.S +++ b/arch/m68k/kernel/entry_mm.S @@ -48,7 +48,7 @@ .globl sys_fork, sys_clone, sys_vfork .globl ret_from_interrupt, bad_interrupt .globl auto_irqhandler_fixup -.globl user_irqvec_fixup, user_irqhandler_fixup +.globl user_irqvec_fixup .text ENTRY(buserr) @@ -240,7 +240,6 @@ user_irqvec_fixup = . + 2 movel %sp,%sp@- movel %d0,%sp@- | put vector # on stack -user_irqhandler_fixup = . + 2 jsr do_IRQ | process the IRQ addql #8,%sp | pop parameters off stack diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index e2b056b3a314..74fefac00899 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -28,7 +28,6 @@ #endif extern u32 auto_irqhandler_fixup[]; -extern u32 user_irqhandler_fixup[]; extern u16 user_irqvec_fixup[]; static int m68k_first_user_vec; @@ -91,16 +90,12 @@ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re * m68k_setup_user_interrupt * @vec: first user vector interrupt to handle * @cnt: number of active user vector interrupts - * @handler: called from user vector interrupts * * setup user vector interrupts, this includes activating the specified range * of interrupts, only then these interrupts can be requested (note: this is - * different from auto vector interrupts). An optional handler can be installed - * to be called instead of the default do_IRQ(), it will be called - * with irq numbers starting from IRQ_USER. + * different from auto vector interrupts). */ -void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, - void (*handler)(unsigned int, struct pt_regs *)) +void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt) { int i; @@ -109,8 +104,6 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, for (i = 0; i < cnt; i++) irq_set_chip(IRQ_USER + i, &user_irq_chip); *user_irqvec_fixup = vec - IRQ_USER; - if (handler) - *user_irqhandler_fixup = (u32)handler; flush_icache(); } diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c index 01f2adf3f19f..5de924ef42ed 100644 --- a/arch/m68k/mvme147/config.c +++ b/arch/m68k/mvme147/config.c @@ -81,7 +81,7 @@ static void mvme147_get_model(char *model) void __init mvme147_init_IRQ(void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } void __init config_mvme147(void) diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c index 0b28e2621653..31a66d99cbca 100644 --- a/arch/m68k/mvme16x/config.c +++ b/arch/m68k/mvme16x/config.c @@ -117,7 +117,7 @@ static void mvme16x_get_hardware_list(struct seq_file *m) static void __init mvme16x_init_IRQ (void) { - m68k_setup_user_interrupt(VEC_USER, 192, NULL); + m68k_setup_user_interrupt(VEC_USER, 192); } #define pcc2chip ((volatile u_char *)0xfff42000) diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c index 7eb378195cf7..78b60f53e90a 100644 --- a/arch/m68k/sun3/sun3ints.c +++ b/arch/m68k/sun3/sun3ints.c @@ -109,7 +109,7 @@ void __init sun3_init_IRQ(void) m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1, 7); - m68k_setup_user_interrupt(VEC_USER, 128, NULL); + m68k_setup_user_interrupt(VEC_USER, 128); if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL)) pr_err("Couldn't register %s interrupt\n", "int5"); -- cgit v1.2.3 From 2690e2148b730c53acb8797821468d0ea1673f25 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sun, 11 Sep 2011 23:40:50 +1000 Subject: m68k/mac: Remove mac_irq_{en,dis}able() wrappers Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/macintosh.h | 2 ++ arch/m68k/mac/baboon.c | 7 ++----- arch/m68k/mac/macints.c | 25 +++++++------------------ 3 files changed, 11 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index c2a1c5eac1a6..12ebe43b008b 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -12,6 +12,8 @@ extern void mac_reset(void); extern void mac_poweroff(void); extern void mac_init_IRQ(void); extern int mac_irq_pending(unsigned int); +extern void mac_irq_enable(struct irq_data *data); +extern void mac_irq_disable(struct irq_data *data); /* * Floppy driver magic hook - probably shouldn't be here diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index b55ead284971..b403924a1cad 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -21,9 +21,6 @@ /* #define DEBUG_IRQS */ -extern void mac_enable_irq(unsigned int); -extern void mac_disable_irq(unsigned int); - int baboon_present; static volatile struct baboon *baboon; static unsigned char baboon_disabled; @@ -111,7 +108,7 @@ void baboon_irq_enable(int irq) baboon_disabled &= ~(1 << irq_idx); if (!baboon_disabled) - mac_enable_irq(IRQ_NUBUS_C); + mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_disable(int irq) @@ -124,7 +121,7 @@ void baboon_irq_disable(int irq) baboon_disabled |= 1 << irq_idx; if (baboon_disabled) - mac_disable_irq(IRQ_NUBUS_C); + mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_clear(int irq) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 98497d288a9b..ba220b70ab8c 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -190,19 +190,6 @@ irqreturn_t mac_debug_handler(int, void *); /* #define DEBUG_MACINTS */ -void mac_enable_irq(unsigned int irq); -void mac_disable_irq(unsigned int irq); - -static void mac_irq_enable(struct irq_data *data) -{ - mac_enable_irq(data->irq); -} - -static void mac_irq_disable(struct irq_data *data) -{ - mac_disable_irq(data->irq); -} - static struct irq_chip mac_irq_chip = { .name = "mac", .irq_enable = mac_irq_enable, @@ -250,16 +237,17 @@ void __init mac_init_IRQ(void) } /* - * mac_enable_irq - enable an interrupt source - * mac_disable_irq - disable an interrupt source + * mac_irq_enable - enable an interrupt source + * mac_irq_disable - disable an interrupt source * mac_clear_irq - clears a pending interrupt - * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending) + * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending) * * These routines are just dispatchers to the VIA/OSS/PSC routines. */ -void mac_enable_irq(unsigned int irq) +void mac_irq_enable(struct irq_data *data) { + int irq = data->irq; int irq_src = IRQ_SRC(irq); switch(irq_src) { @@ -292,8 +280,9 @@ void mac_enable_irq(unsigned int irq) } } -void mac_disable_irq(unsigned int irq) +void mac_irq_disable(struct irq_data *data) { + int irq = data->irq; int irq_src = IRQ_SRC(irq); switch(irq_src) { -- cgit v1.2.3 From 0836b5cdd23d573bf7ec57f73ff774b3ad660bf4 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 4 Nov 2011 01:13:20 +0000 Subject: ARM: picoxcell: add extra temp register to addruart 639da5ee3 (ARM: add an extra temp register to the low level debugging addruart macro) didn't include picoxcell as it hadn't been merged at the time. Fix up the compile breakage by adding the extra temp parameter. Signed-off-by: Jamie Iles --- arch/arm/mach-picoxcell/include/mach/debug-macro.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S index 8f2c234ed9d9..58d4ee3ae949 100644 --- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S +++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S @@ -14,7 +14,7 @@ #define UART_SHIFT 2 - .macro addruart, rp, rv + .macro addruart, rp, rv, tmp ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE) ldr \rp, =PICOXCELL_UART1_BASE .endm -- cgit v1.2.3 From 44656fa03926e7363ab41c565619800a4b3b1322 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 8 Nov 2011 10:20:10 -0800 Subject: kbuild: Fix missing system calls check on mips. Commit 5f7efb4 (Kbuild: append missing-syscalls to the default target list) broke MIPS build. Reported-tested-and-acked-by: Ralf Baechle Signed-off-by: David Daney Signed-off-by: Michal Marek --- Kbuild | 2 +- arch/mips/Makefile | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/Kbuild b/Kbuild index 4caab4f6cba7..b8b708ad6dc3 100644 --- a/Kbuild +++ b/Kbuild @@ -92,7 +92,7 @@ always += missing-syscalls targets += missing-syscalls quiet_cmd_syscalls = CALL $< - cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) + cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags) missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE $(call cmd,syscalls) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9b4cb00407d7..0be318609fc6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -286,11 +286,11 @@ CLEAN_FILES += vmlinux.32 vmlinux.64 archprepare: ifdef CONFIG_MIPS32_N32 @echo ' Checking missing-syscalls for N32' - $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=n32" + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32" endif ifdef CONFIG_MIPS32_O32 @echo ' Checking missing-syscalls for O32' - $(Q)$(MAKE) $(build)=. missing-syscalls ccflags-y="-mabi=32" + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32" endif install: -- cgit v1.2.3 From b3c41f4c18de9aa90315dd0d197f8485b00e3cc5 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 18 Sep 2011 09:56:35 +0800 Subject: ARM: at91: usart: drop static map regs for dbgu In commit fb149f9e28354 we introduce ioremap support for static map_io, we do not need this register entry anymore. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/at91cap9_devices.c | 5 ++--- arch/arm/mach-at91/at91rm9200_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9260_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9261_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9263_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9g45_devices.c | 5 ++--- arch/arm/mach-at91/at91sam9rl_devices.c | 5 ++--- 7 files changed, 14 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index a4401d6b5b07..b9739baa21e4 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1021,8 +1021,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1035,7 +1035,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 01d8bbd1468b..66591fa53e05 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -877,8 +877,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -891,7 +891,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 24b6f8c0440d..25e3464fb07f 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -837,8 +837,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -851,7 +851,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3b70b3897d95..ae78f4d03b73 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -816,8 +816,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -830,7 +830,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 3faa1fde9ad9..ad017eb1f8df 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1196,8 +1196,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1210,7 +1210,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 000b5e1da965..ad00953a7f4f 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1332,8 +1332,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -1346,7 +1346,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 305a851b5bff..429b6d7e9492 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -908,8 +908,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {} #if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, + .start = AT91_BASE_SYS + AT91_DBGU, + .end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -922,7 +922,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); -- cgit v1.2.3 From 30458edf667b77012573e649fced3cf5c01efe82 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 2 Nov 2011 15:02:43 +0800 Subject: at91: vmalloc fix missing AT91_VIRT_BASE define VMALLOC_END is defined in terms of AT91_VIRT_BASE but this needs mach/hardware.h for it's definition. In file included from arch/arm/mach-at91/board-usb-a926x.c:26:0: include/linux/mm.h: In function 'is_vmalloc_addr': include/linux/mm.h:305:41: error: 'AT91_VIRT_BASE' undeclared (first use in this function) include/linux/mm.h:305:41: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Signed-off-by: Jamie Iles --- arch/arm/mach-at91/include/mach/vmalloc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h index 8eb459f3f5b7..8e4a1bd0ab1d 100644 --- a/arch/arm/mach-at91/include/mach/vmalloc.h +++ b/arch/arm/mach-at91/include/mach/vmalloc.h @@ -21,6 +21,8 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H +#include + #define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) #endif -- cgit v1.2.3 From b2eb5309fbc680406d6bf3b182178f0cfaf951fb Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 19 Sep 2011 19:26:52 +0800 Subject: at91/yl-9200: Fix section mismatch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/mach-at91/board-yl-9200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 649b052231f5..12a3f955162b 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -384,7 +384,7 @@ static struct spi_board_info yl9200_spi_devices[] = { #include