From 06cf5583fd9ac782cf34996cdabb48afdf478e37 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Wed, 20 Jun 2007 23:36:47 +0200 Subject: [MIPS] SNI RM updates - use RTC_CLASS instead of GEN_RTC - get rid of ds1216 in favour of a RTC_CLASS driver - use correct console device for older RM400 - use physical addresses for 82596 device - use 128 byte L1 cache line size (this is needed because most of the SNI caches are using 128 L2 cache lines) Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sni/rm200.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) (limited to 'arch/mips/sni/rm200.c') diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index b82ff129f5ea..4bfda020fdc7 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -15,7 +15,6 @@ #include #include -#include #include #define PORT(_base,_irq) \ @@ -41,20 +40,34 @@ static struct platform_device rm200_serial8250_device = { }, }; +static struct resource rm200_ds1216_rsrc[] = { + { + .start = 0x1cd41ffc, + .end = 0x1cd41fff, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device rm200_ds1216_device = { + .name = "rtc-ds1216", + .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc), + .resource = rm200_ds1216_rsrc +}; + static struct resource snirm_82596_rm200_rsrc[] = { { - .start = 0xb8000000, - .end = 0xb80fffff, + .start = 0x18000000, + .end = 0x180fffff, .flags = IORESOURCE_MEM }, { - .start = 0xbb000000, - .end = 0xbb000004, + .start = 0x1b000000, + .end = 0x1b000004, .flags = IORESOURCE_MEM }, { - .start = 0xbff00000, - .end = 0xbff00020, + .start = 0x1ff00000, + .end = 0x1ff00020, .flags = IORESOURCE_MEM }, { @@ -96,6 +109,7 @@ static int __init snirm_setup_devinit(void) { if (sni_brd_type == SNI_BRD_RM200) { platform_device_register(&rm200_serial8250_device); + platform_device_register(&rm200_ds1216_device); platform_device_register(&snirm_82596_rm200_pdev); platform_device_register(&snirm_53c710_rm200_pdev); } @@ -176,11 +190,9 @@ void __init sni_rm200_irq_init(void) setup_irq (SNI_RM200_INT_START + 0, &sni_isa_irq); } -void sni_rm200_init(void) +void __init sni_rm200_init(void) { set_io_port_base(SNI_PORT_BASE + 0x02000000); ioport_resource.end += 0x02000000; - ds1216_base = (volatile unsigned char *) SNI_DS1216_RM200_BASE; - rtc_mips_get_time = ds1216_get_cmos_time; board_time_init = sni_cpu_time_init; } -- cgit v1.2.3