From 6bebb572404f96d367170fb263603cda7251f932 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 4 Jan 2012 10:50:09 +0100
Subject: ARM: 7268/1: integrator: defconfig for both AP and CP

This updates the Integrator defconfig to include the hardware
found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further
the sometimes disrupting VGA_CONSOLE is disabled (those who
have a VGA card can enable it) and typical default VFAT
layouts of the MMC cards are supported by enabling VFAT and
CP437 encoding of the file system.

After this my default kernels boot successfully on Integrator
AP and CP alike.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/integrator_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 1103f62a1964..a8314c3ee84d 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -57,18 +57,24 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCI=y
 CONFIG_E100=y
+CONFIG_SMC91X=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ARMCLCD=y
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL030=y
 CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
@@ -78,5 +84,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-- 
cgit v1.2.3


From 45cd5290bfd358e9885c0bf47a8c46671a92f716 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 12 Jan 2012 23:08:07 +0000
Subject: ARM: add dma coherent region reporting via procfs

Add a new seqfile for reporting coherent DMA allocations.  This contains
the address range, size and the function which was used to allocate
each region, allowing these allocations to be viewed in much the same
way as /proc/vmallocinfo.

The DMA coherent region has limited space, so this allows allocation
failures to be viewed, as well as finding out how much space is being
used.

Make sure this file is only readable by root - same as vmallocinfo - to
prevent information leakage.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/dma-mapping.c | 20 ++++++++-----
 arch/arm/mm/vmregion.c    | 76 ++++++++++++++++++++++++++++++++++++++++++++++-
 arch/arm/mm/vmregion.h    |  5 +++-
 3 files changed, 92 insertions(+), 9 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 1aa664a1999f..db23ae4aaaab 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -214,7 +214,8 @@ static int __init consistent_init(void)
 core_initcall(consistent_init);
 
 static void *
-__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
+	const void *caller)
 {
 	struct arm_vmregion *c;
 	size_t align;
@@ -241,7 +242,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 	 * Allocate a virtual address in the consistent mapping region.
 	 */
 	c = arm_vmregion_alloc(&consistent_head, align, size,
-			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller);
 	if (c) {
 		pte_t *pte;
 		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
@@ -320,14 +321,14 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
 
 #else	/* !CONFIG_MMU */
 
-#define __dma_alloc_remap(page, size, gfp, prot)	page_address(page)
+#define __dma_alloc_remap(page, size, gfp, prot, c)	page_address(page)
 #define __dma_free_remap(addr, size)			do { } while (0)
 
 #endif	/* CONFIG_MMU */
 
 static void *
 __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot)
+	    pgprot_t prot, const void *caller)
 {
 	struct page *page;
 	void *addr;
@@ -349,7 +350,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 		return NULL;
 
 	if (!arch_is_coherent())
-		addr = __dma_alloc_remap(page, size, gfp, prot);
+		addr = __dma_alloc_remap(page, size, gfp, prot, caller);
 	else
 		addr = page_address(page);
 
@@ -374,7 +375,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
 		return memory;
 
 	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_dmacoherent(pgprot_kernel));
+			   pgprot_dmacoherent(pgprot_kernel),
+			   __builtin_return_address(0));
 }
 EXPORT_SYMBOL(dma_alloc_coherent);
 
@@ -386,7 +388,8 @@ void *
 dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
 	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_writecombine(pgprot_kernel));
+			   pgprot_writecombine(pgprot_kernel),
+			   __builtin_return_address(0));
 }
 EXPORT_SYMBOL(dma_alloc_writecombine);
 
@@ -723,6 +726,9 @@ EXPORT_SYMBOL(dma_set_mask);
 
 static int __init dma_debug_do_init(void)
 {
+#ifdef CONFIG_MMU
+	arm_vmregion_create_proc("dma-mappings", &consistent_head);
+#endif
 	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
 	return 0;
 }
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
index 036fdbfdd62f..a631016e1f8f 100644
--- a/arch/arm/mm/vmregion.c
+++ b/arch/arm/mm/vmregion.c
@@ -1,5 +1,8 @@
+#include <linux/fs.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 
 #include "vmregion.h"
@@ -36,7 +39,7 @@
 
 struct arm_vmregion *
 arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
-		   size_t size, gfp_t gfp)
+		   size_t size, gfp_t gfp, const void *caller)
 {
 	unsigned long start = head->vm_start, addr = head->vm_end;
 	unsigned long flags;
@@ -52,6 +55,8 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
 	if (!new)
 		goto out;
 
+	new->caller = caller;
+
 	spin_lock_irqsave(&head->vm_lock, flags);
 
 	addr = rounddown(addr - size, align);
@@ -129,3 +134,72 @@ void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
 
 	kfree(c);
 }
+
+#ifdef CONFIG_PROC_FS
+static int arm_vmregion_show(struct seq_file *m, void *p)
+{
+	struct arm_vmregion *c = list_entry(p, struct arm_vmregion, vm_list);
+
+	seq_printf(m, "0x%08lx-0x%08lx %7lu", c->vm_start, c->vm_end,
+		c->vm_end - c->vm_start);
+	if (c->caller)
+		seq_printf(m, " %pS", (void *)c->caller);
+	seq_putc(m, '\n');
+	return 0;
+}
+
+static void *arm_vmregion_start(struct seq_file *m, loff_t *pos)
+{
+	struct arm_vmregion_head *h = m->private;
+	spin_lock_irq(&h->vm_lock);
+	return seq_list_start(&h->vm_list, *pos);
+}
+
+static void *arm_vmregion_next(struct seq_file *m, void *p, loff_t *pos)
+{
+	struct arm_vmregion_head *h = m->private;
+	return seq_list_next(p, &h->vm_list, pos);
+}
+
+static void arm_vmregion_stop(struct seq_file *m, void *p)
+{
+	struct arm_vmregion_head *h = m->private;
+	spin_unlock_irq(&h->vm_lock);
+}
+
+static const struct seq_operations arm_vmregion_ops = {
+	.start	= arm_vmregion_start,
+	.stop	= arm_vmregion_stop,
+	.next	= arm_vmregion_next,
+	.show	= arm_vmregion_show,
+};
+
+static int arm_vmregion_open(struct inode *inode, struct file *file)
+{
+	struct arm_vmregion_head *h = PDE(inode)->data;
+	int ret = seq_open(file, &arm_vmregion_ops);
+	if (!ret) {
+		struct seq_file *m = file->private_data;
+		m->private = h;
+	}
+	return ret;
+}
+
+static const struct file_operations arm_vmregion_fops = {
+	.open	= arm_vmregion_open,
+	.read	= seq_read,
+	.llseek	= seq_lseek,
+	.release = seq_release,
+};
+
+int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h)
+{
+	proc_create_data(path, S_IRUSR, NULL, &arm_vmregion_fops, h);
+	return 0;
+}
+#else
+int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h)
+{
+	return 0;
+}
+#endif
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
index 15e9f044db9f..162be662c088 100644
--- a/arch/arm/mm/vmregion.h
+++ b/arch/arm/mm/vmregion.h
@@ -19,11 +19,14 @@ struct arm_vmregion {
 	unsigned long		vm_end;
 	struct page		*vm_pages;
 	int			vm_active;
+	const void		*caller;
 };
 
-struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t, const void *);
 struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
 struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
 void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
 
+int arm_vmregion_create_proc(const char *, struct arm_vmregion_head *);
+
 #endif
-- 
cgit v1.2.3


From 94e5a85b3be0ce109d26aa6812b2a02c518a0e4b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 18 Jan 2012 15:32:49 +0000
Subject: ARM: earlier initialization of vectors page

Initialize the contents of the vectors page immediately after we
allocate the page, but before we map it.  This avoids any possible
aliases with other mappings which may need to be flushed after the
page has been mapped irrespective of the cache type.

We follow this later with a flush_cache_all() after all static memory
mappings have been initialized, which ensures that this is safe from
any cache effects.

Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/traps.h |  2 +-
 arch/arm/kernel/setup.c      |  1 -
 arch/arm/kernel/traps.c      | 10 ++++------
 arch/arm/mm/mmu.c            |  7 +++++--
 4 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index 5b29a6673625..f555bb3664dc 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -46,7 +46,7 @@ static inline int in_exception_text(unsigned long ptr)
 	return in ? : __in_irqentry_text(ptr);
 }
 
-extern void __init early_trap_init(void);
+extern void __init early_trap_init(void *);
 extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
 extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs);
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 129fbd55bde8..9b65cb4589e2 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -961,7 +961,6 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
-	early_trap_init();
 
 	if (mdesc->init_early)
 		mdesc->init_early();
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 99a572702509..be15dafaa881 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -781,18 +781,16 @@ static void __init kuser_get_tls_init(unsigned long vectors)
 		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
 }
 
-void __init early_trap_init(void)
+void __init early_trap_init(void *vectors_base)
 {
-#if defined(CONFIG_CPU_USE_DOMAINS)
-	unsigned long vectors = CONFIG_VECTORS_BASE;
-#else
-	unsigned long vectors = (unsigned long)vectors_page;
-#endif
+	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	extern char __kuser_helper_start[], __kuser_helper_end[];
 	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
 
+	vectors_page = vectors_base;
+
 	/*
 	 * Copy the vectors, stubs and kuser helpers (in entry-armv.S)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 94c5a0c94f5e..c1263adc2a26 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -997,11 +997,14 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 {
 	struct map_desc map;
 	unsigned long addr;
+	void *vectors;
 
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors_page = early_alloc(PAGE_SIZE);
+	vectors = early_alloc(PAGE_SIZE);
+
+	early_trap_init(vectors);
 
 	for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -1041,7 +1044,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 * location (0xffff0000).  If we aren't using high-vectors, also
 	 * create a mapping at the low-vectors virtual address.
 	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors_page));
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
 	map.virtual = 0xffff0000;
 	map.length = PAGE_SIZE;
 	map.type = MT_HIGH_VECTORS;
-- 
cgit v1.2.3


From de27c308223dc9bd48de9742c7c2b53a15c1b012 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 2 Jul 2011 14:46:27 +0100
Subject: ARM: pgtable: move TOP_PTE address definitions to arch/arm/mm/mm.h

Move the TOP_PTE address definitions to one central place so that it's
easy to discover what they're being used for.  This helps to ensure
that there are no overlaps.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/copypage-v4mc.c   | 10 +++-------
 arch/arm/mm/copypage-v6.c     | 16 ++++++----------
 arch/arm/mm/copypage-xscale.c |  6 ------
 arch/arm/mm/flush.c           |  8 +++-----
 arch/arm/mm/mm.h              | 13 +++++++++++++
 5 files changed, 25 insertions(+), 28 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 7d0a8c230342..87a23ca1fc61 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -23,10 +23,6 @@
 
 #include "mm.h"
 
-/*
- * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
- * specific hacks for copying pages efficiently.
- */
 #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
 				  L_PTE_MT_MINICACHE)
 
@@ -78,10 +74,10 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 
 	raw_spin_lock(&minicache_lock);
 
-	set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
-	flush_tlb_kernel_page(0xffff8000);
+	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
+	flush_tlb_kernel_page(COPYPAGE_MINICACHE);
 
-	mc_copy_user_page((void *)0xffff8000, kto);
+	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
 
 	raw_spin_unlock(&minicache_lock);
 
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 3d9a1552cef6..c00a75014435 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -24,9 +24,6 @@
 #error FIX ME
 #endif
 
-#define from_address	(0xffff8000)
-#define to_address	(0xffffc000)
-
 static DEFINE_RAW_SPINLOCK(v6_lock);
 
 /*
@@ -90,11 +87,11 @@ static void v6_copy_user_highpage_aliasing(struct page *to,
 	 */
 	raw_spin_lock(&v6_lock);
 
-	set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0);
-	set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0);
+	kfrom = COPYPAGE_V6_FROM + (offset << PAGE_SHIFT);
+	kto   = COPYPAGE_V6_TO + (offset << PAGE_SHIFT);
 
-	kfrom = from_address + (offset << PAGE_SHIFT);
-	kto   = to_address + (offset << PAGE_SHIFT);
+	set_pte_ext(TOP_PTE(kfrom), pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(kto), pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0);
 
 	flush_tlb_kernel_page(kfrom);
 	flush_tlb_kernel_page(kto);
@@ -111,8 +108,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to,
  */
 static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vaddr)
 {
-	unsigned int offset = CACHE_COLOUR(vaddr);
-	unsigned long to = to_address + (offset << PAGE_SHIFT);
+	unsigned long to = COPYPAGE_V6_TO + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
 
 	/* FIXME: not highmem safe */
 	discard_old_kernel_data(page_address(page));
@@ -123,7 +119,7 @@ static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vad
 	 */
 	raw_spin_lock(&v6_lock);
 
-	set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(to), pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0);
 	flush_tlb_kernel_page(to);
 	clear_page((void *)to);
 
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 610c24ced310..90f3bb58eafa 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -23,12 +23,6 @@
 
 #include "mm.h"
 
-/*
- * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
- * specific hacks for copying pages efficiently.
- */
-#define COPYPAGE_MINICACHE	0xffff8000
-
 #define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
 				  L_PTE_MT_MINICACHE)
 
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 1a8d4aa821be..f4d407af4690 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -23,11 +23,9 @@
 
 #ifdef CONFIG_CPU_CACHE_VIPT
 
-#define ALIAS_FLUSH_START	0xffff4000
-
 static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 {
-	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+	unsigned long to = FLUSH_ALIAS_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
 	const int zero = 0;
 
 	set_pte_ext(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL), 0);
@@ -46,8 +44,8 @@ static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned
 	unsigned long offset = vaddr & (PAGE_SIZE - 1);
 	unsigned long to;
 
-	set_pte_ext(TOP_PTE(ALIAS_FLUSH_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0);
-	to = ALIAS_FLUSH_START + (colour << PAGE_SHIFT) + offset;
+	set_pte_ext(TOP_PTE(FLUSH_ALIAS_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0);
+	to = FLUSH_ALIAS_START + (colour << PAGE_SHIFT) + offset;
 	flush_tlb_kernel_page(to);
 	flush_icache_range(to, to + len);
 }
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 70f6d3ea4834..6ee1ff2c1da6 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -5,6 +5,19 @@ extern pmd_t *top_pmd;
 
 #define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
 
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently, while 0xffff4000
+ * is reserved for VIPT aliasing flushing by generic code.
+ *
+ * Note that we don't allow VIPT aliasing caches with SMP.
+ */
+#define COPYPAGE_MINICACHE	0xffff8000
+#define COPYPAGE_V6_FROM	0xffff8000
+#define COPYPAGE_V6_TO		0xffffc000
+/* PFN alias flushing, for VIPT caches */
+#define FLUSH_ALIAS_START	0xffff4000
+
 static inline pmd_t *pmd_off_k(unsigned long virt)
 {
 	return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
-- 
cgit v1.2.3


From 6e78df176141f2cb673bed7fa47825e3c6a8719f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 2 Jul 2011 14:56:42 +0100
Subject: ARM: pgtable: use mk_pte rather than pfn_pte(page_to_pfn())

mk_pte is provided to do this translation for us, so use it rather
than open-coding it in the copypage code.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/copypage-v4mc.c   | 2 +-
 arch/arm/mm/copypage-v6.c     | 6 +++---
 arch/arm/mm/copypage-xscale.c | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 87a23ca1fc61..e4dc2f491123 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -74,7 +74,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 
 	raw_spin_lock(&minicache_lock);
 
-	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
+	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), mk_pte(from, minicache_pgprot), 0);
 	flush_tlb_kernel_page(COPYPAGE_MINICACHE);
 
 	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index c00a75014435..86524591b1b5 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -90,8 +90,8 @@ static void v6_copy_user_highpage_aliasing(struct page *to,
 	kfrom = COPYPAGE_V6_FROM + (offset << PAGE_SHIFT);
 	kto   = COPYPAGE_V6_TO + (offset << PAGE_SHIFT);
 
-	set_pte_ext(TOP_PTE(kfrom), pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0);
-	set_pte_ext(TOP_PTE(kto), pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(kfrom), mk_pte(from, PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(kto), mk_pte(to, PAGE_KERNEL), 0);
 
 	flush_tlb_kernel_page(kfrom);
 	flush_tlb_kernel_page(kto);
@@ -119,7 +119,7 @@ static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vad
 	 */
 	raw_spin_lock(&v6_lock);
 
-	set_pte_ext(TOP_PTE(to), pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0);
+	set_pte_ext(TOP_PTE(to), mk_pte(page, PAGE_KERNEL), 0);
 	flush_tlb_kernel_page(to);
 	clear_page((void *)to);
 
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 90f3bb58eafa..2497dcf6d9ae 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -94,7 +94,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
 
 	raw_spin_lock(&minicache_lock);
 
-	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0);
+	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), mk_pte(from, minicache_pgprot), 0);
 	flush_tlb_kernel_page(COPYPAGE_MINICACHE);
 
 	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
-- 
cgit v1.2.3


From 67ece1443174d852e71c42facb3e2d7dd338c88a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 2 Jul 2011 15:20:44 +0100
Subject: ARM: pgtable: consolidate set_pte_ext(TOP_PTE,...) + tlb flush

A number of places establish a PTE in our top page table and
immediately flush the TLB.  Rather than having this at every callsite,
provide an inline function for this purpose.

This changes some global tlb flushes to be local; each time we setup
one of these mappings, we always do it with preemption disabled which
would prevent us migrating to another CPU.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/copypage-v4mc.c   |  3 +--
 arch/arm/mm/copypage-v6.c     | 10 +++-------
 arch/arm/mm/copypage-xscale.c |  3 +--
 arch/arm/mm/flush.c           | 10 ++++------
 arch/arm/mm/highmem.c         | 13 +++++--------
 arch/arm/mm/mm.h              |  6 ++++++
 6 files changed, 20 insertions(+), 25 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index e4dc2f491123..6e06180a8bc0 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -74,8 +74,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 
 	raw_spin_lock(&minicache_lock);
 
-	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), mk_pte(from, minicache_pgprot), 0);
-	flush_tlb_kernel_page(COPYPAGE_MINICACHE);
+	set_top_pte(COPYPAGE_MINICACHE, mk_pte(from, minicache_pgprot));
 
 	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
 
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 86524591b1b5..29c770463e41 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -90,11 +90,8 @@ static void v6_copy_user_highpage_aliasing(struct page *to,
 	kfrom = COPYPAGE_V6_FROM + (offset << PAGE_SHIFT);
 	kto   = COPYPAGE_V6_TO + (offset << PAGE_SHIFT);
 
-	set_pte_ext(TOP_PTE(kfrom), mk_pte(from, PAGE_KERNEL), 0);
-	set_pte_ext(TOP_PTE(kto), mk_pte(to, PAGE_KERNEL), 0);
-
-	flush_tlb_kernel_page(kfrom);
-	flush_tlb_kernel_page(kto);
+	set_top_pte(kfrom, mk_pte(from, PAGE_KERNEL));
+	set_top_pte(kto, mk_pte(to, PAGE_KERNEL));
 
 	copy_page((void *)kto, (void *)kfrom);
 
@@ -119,8 +116,7 @@ static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vad
 	 */
 	raw_spin_lock(&v6_lock);
 
-	set_pte_ext(TOP_PTE(to), mk_pte(page, PAGE_KERNEL), 0);
-	flush_tlb_kernel_page(to);
+	set_top_pte(to, mk_pte(page, PAGE_KERNEL));
 	clear_page((void *)to);
 
 	raw_spin_unlock(&v6_lock);
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 2497dcf6d9ae..804eeddda97f 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -94,8 +94,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
 
 	raw_spin_lock(&minicache_lock);
 
-	set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), mk_pte(from, minicache_pgprot), 0);
-	flush_tlb_kernel_page(COPYPAGE_MINICACHE);
+	set_top_pte(COPYPAGE_MINICACHE, mk_pte(from, minicache_pgprot));
 
 	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
 
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index f4d407af4690..4d0b70f035eb 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -28,8 +28,7 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 	unsigned long to = FLUSH_ALIAS_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
 	const int zero = 0;
 
-	set_pte_ext(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL), 0);
-	flush_tlb_kernel_page(to);
+	set_top_pte(to, pfn_pte(pfn, PAGE_KERNEL));
 
 	asm(	"mcrr	p15, 0, %1, %0, c14\n"
 	"	mcr	p15, 0, %2, c7, c10, 4"
@@ -40,13 +39,12 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 
 static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len)
 {
-	unsigned long colour = CACHE_COLOUR(vaddr);
+	unsigned long va = FLUSH_ALIAS_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
 	unsigned long offset = vaddr & (PAGE_SIZE - 1);
 	unsigned long to;
 
-	set_pte_ext(TOP_PTE(FLUSH_ALIAS_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0);
-	to = FLUSH_ALIAS_START + (colour << PAGE_SHIFT) + offset;
-	flush_tlb_kernel_page(to);
+	set_top_pte(va, pfn_pte(pfn, PAGE_KERNEL));
+	to = va + offset;
 	flush_icache_range(to, to + len);
 }
 
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 807c0573abbe..35352517a5d4 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -71,13 +71,12 @@ void *__kmap_atomic(struct page *page)
 	 */
 	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
 #endif
-	set_pte_ext(TOP_PTE(vaddr), mk_pte(page, kmap_prot), 0);
 	/*
 	 * When debugging is off, kunmap_atomic leaves the previous mapping
-	 * in place, so this TLB flush ensures the TLB is updated with the
-	 * new mapping.
+	 * in place, so the contained TLB flush ensures the TLB is updated
+	 * with the new mapping.
 	 */
-	local_flush_tlb_kernel_page(vaddr);
+	set_top_pte(vaddr, mk_pte(page, kmap_prot));
 
 	return (void *)vaddr;
 }
@@ -96,8 +95,7 @@ void __kunmap_atomic(void *kvaddr)
 			__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
 #ifdef CONFIG_DEBUG_HIGHMEM
 		BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-		set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
-		local_flush_tlb_kernel_page(vaddr);
+		set_top_pte(vaddr, __pte(0));
 #else
 		(void) idx;  /* to kill a warning */
 #endif
@@ -123,8 +121,7 @@ void *kmap_atomic_pfn(unsigned long pfn)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
 #endif
-	set_pte_ext(TOP_PTE(vaddr), pfn_pte(pfn, kmap_prot), 0);
-	local_flush_tlb_kernel_page(vaddr);
+	set_top_pte(vaddr, pfn_pte(pfn, kmap_prot));
 
 	return (void *)vaddr;
 }
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 6ee1ff2c1da6..a4e7febeb6a1 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -18,6 +18,12 @@ extern pmd_t *top_pmd;
 /* PFN alias flushing, for VIPT caches */
 #define FLUSH_ALIAS_START	0xffff4000
 
+static inline void set_top_pte(unsigned long va, pte_t pte)
+{
+	set_pte_ext(TOP_PTE(va), pte, 0);
+	local_flush_tlb_kernel_page(va);
+}
+
 static inline pmd_t *pmd_off_k(unsigned long virt)
 {
 	return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
-- 
cgit v1.2.3


From 0d31fe47b0f62e6546779eae2fc9b2e024aff4ce Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 4 Jul 2011 11:22:27 +0100
Subject: ARM: pgtable: provide get_top_pte() to complement set_top_pte()

Provide get_top_pte() to complement set_top_pte(), moving the only
users of TOP_PTE to arch/arm/mm/mm.h.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/highmem.c | 8 +++-----
 arch/arm/mm/mm.h      | 5 +++++
 2 files changed, 8 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 35352517a5d4..3a9e8aa19759 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -69,7 +69,7 @@ void *__kmap_atomic(struct page *page)
 	 * With debugging enabled, kunmap_atomic forces that entry to 0.
 	 * Make sure it was indeed properly unmapped.
 	 */
-	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+	BUG_ON(!pte_none(get_top_pte(vaddr)));
 #endif
 	/*
 	 * When debugging is off, kunmap_atomic leaves the previous mapping
@@ -119,7 +119,7 @@ void *kmap_atomic_pfn(unsigned long pfn)
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(*(TOP_PTE(vaddr))));
+	BUG_ON(!pte_none(get_top_pte(vaddr)));
 #endif
 	set_top_pte(vaddr, pfn_pte(pfn, kmap_prot));
 
@@ -129,11 +129,9 @@ void *kmap_atomic_pfn(unsigned long pfn)
 struct page *kmap_atomic_to_page(const void *ptr)
 {
 	unsigned long vaddr = (unsigned long)ptr;
-	pte_t *pte;
 
 	if (vaddr < FIXADDR_START)
 		return virt_to_page(ptr);
 
-	pte = TOP_PTE(vaddr);
-	return pte_page(*pte);
+	return pte_page(get_top_pte(vaddr));
 }
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index a4e7febeb6a1..1651d5aa04a6 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,11 @@ static inline void set_top_pte(unsigned long va, pte_t pte)
 	local_flush_tlb_kernel_page(va);
 }
 
+static inline pte_t get_top_pte(unsigned long va)
+{
+	return *TOP_PTE(va);
+}
+
 static inline pmd_t *pmd_off_k(unsigned long virt)
 {
 	return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
-- 
cgit v1.2.3


From 60db4fcf14c6b562399579473a67e51eed694ff4 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 4 Jul 2011 11:25:53 +0100
Subject: ARM: pgtable: get rid of TOP_PTE()

Get rid of the TOP_PTE() macro as we now have proper accessor functions
instead.  No one should be directly referencing the top pte table
anymore.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mm.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 1651d5aa04a6..27f4a619b35d 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -3,8 +3,6 @@
 /* the upper-most page table pointer */
 extern pmd_t *top_pmd;
 
-#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-
 /*
  * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
  * specific hacks for copying pages efficiently, while 0xffff4000
@@ -20,13 +18,15 @@ extern pmd_t *top_pmd;
 
 static inline void set_top_pte(unsigned long va, pte_t pte)
 {
-	set_pte_ext(TOP_PTE(va), pte, 0);
+	pte_t *ptep = pte_offset_kernel(top_pmd, va);
+	set_pte_ext(ptep, pte, 0);
 	local_flush_tlb_kernel_page(va);
 }
 
 static inline pte_t get_top_pte(unsigned long va)
 {
-	return *TOP_PTE(va);
+	pte_t *ptep = pte_offset_kernel(top_pmd, va);
+	return *ptep;
 }
 
 static inline pmd_t *pmd_off_k(unsigned long virt)
-- 
cgit v1.2.3


From 149c24151e8577b2a033639722dc5734de5e6eaf Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 18 Jan 2012 15:59:45 +0000
Subject: ARM: SMP: use a timing out completion for cpu hotplug

Rather than open-coding the jiffy-based wait, and polling for the
secondary CPU to come online, use a completion instead.  This
removes the need to poll, instead we will be notified when the
secondary CPU has initialized.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/smp.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 57db122a4f62..2b26dca2168b 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -58,6 +58,8 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 };
 
+static DECLARE_COMPLETION(cpu_running);
+
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
@@ -98,20 +100,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 */
 	ret = boot_secondary(cpu, idle);
 	if (ret == 0) {
-		unsigned long timeout;
-
 		/*
 		 * CPU was successfully started, wait for it
 		 * to come online or time out.
 		 */
-		timeout = jiffies + HZ;
-		while (time_before(jiffies, timeout)) {
-			if (cpu_online(cpu))
-				break;
-
-			udelay(10);
-			barrier();
-		}
+		wait_for_completion_timeout(&cpu_running,
+						 msecs_to_jiffies(1000));
 
 		if (!cpu_online(cpu)) {
 			pr_crit("CPU%u: failed to come online\n", cpu);
@@ -300,9 +294,10 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	/*
 	 * OK, now it's safe to let the boot CPU continue.  Wait for
 	 * the CPU migration code to notice that the CPU is online
-	 * before we continue.
+	 * before we continue - which happens after __cpu_up returns.
 	 */
 	set_cpu_online(cpu, true);
+	complete(&cpu_running);
 
 	/*
 	 * Setup the percpu timer for this CPU.
-- 
cgit v1.2.3


From 195864cf3d6f5b6b743793bda3aaa2ff65d322ae Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 19 Jan 2012 10:05:41 +0000
Subject: ARM: move CP15 definitions to separate header file

Avoid namespace conflicts with drivers over the CP15 definitions by
moving CP15 related prototypes and definitions to a private header
file.

Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com> [Tegra]
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> [EP93xx]
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/cp15.h      | 87 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/system.h    | 77 -----------------------------------
 arch/arm/kernel/fiq.c            |  2 +-
 arch/arm/kernel/head-nommu.S     |  2 +-
 arch/arm/kernel/head.S           |  2 +-
 arch/arm/kernel/setup.c          |  2 +-
 arch/arm/mach-exynos/hotplug.c   |  1 +
 arch/arm/mach-realview/hotplug.c |  1 +
 arch/arm/mach-tegra/hotplug.c    |  1 +
 arch/arm/mach-vexpress/hotplug.c |  2 +-
 arch/arm/mm/alignment.c          |  2 +-
 arch/arm/mm/cache-feroceon-l2.c  |  1 +
 arch/arm/mm/cache-tauros2.c      |  1 +
 arch/arm/mm/cache-xsc3l2.c       |  2 +-
 arch/arm/mm/ioremap.c            |  1 +
 arch/arm/mm/mmu.c                |  1 +
 arch/arm/mm/pgd.c                |  1 +
 arch/arm/vfp/vfpmodule.c         |  1 +
 18 files changed, 103 insertions(+), 84 deletions(-)
 create mode 100644 arch/arm/include/asm/cp15.h

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h
new file mode 100644
index 000000000000..3dabd8dd4049
--- /dev/null
+++ b/arch/arm/include/asm/cp15.h
@@ -0,0 +1,87 @@
+#ifndef __ASM_ARM_CP15_H
+#define __ASM_ARM_CP15_H
+
+#include <asm/system.h>
+
+/*
+ * CR1 bits (CP#15 CR1)
+ */
+#define CR_M	(1 << 0)	/* MMU enable				*/
+#define CR_A	(1 << 1)	/* Alignment abort enable		*/
+#define CR_C	(1 << 2)	/* Dcache enable			*/
+#define CR_W	(1 << 3)	/* Write buffer enable			*/
+#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
+#define CR_D	(1 << 5)	/* 32-bit data address range		*/
+#define CR_L	(1 << 6)	/* Implementation defined		*/
+#define CR_B	(1 << 7)	/* Big endian				*/
+#define CR_S	(1 << 8)	/* System MMU protection		*/
+#define CR_R	(1 << 9)	/* ROM MMU protection			*/
+#define CR_F	(1 << 10)	/* Implementation defined		*/
+#define CR_Z	(1 << 11)	/* Implementation defined		*/
+#define CR_I	(1 << 12)	/* Icache enable			*/
+#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
+#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
+#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
+#define CR_DT	(1 << 16)
+#define CR_IT	(1 << 18)
+#define CR_ST	(1 << 19)
+#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
+#define CR_U	(1 << 22)	/* Unaligned access operation		*/
+#define CR_XP	(1 << 23)	/* Extended page tables			*/
+#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+#define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
+#define CR_TRE	(1 << 28)	/* TEX remap enable			*/
+#define CR_AFE	(1 << 29)	/* Access flag enable			*/
+#define CR_TE	(1 << 30)	/* Thumb exception enable		*/
+
+#ifndef __ASSEMBLY__
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high()	(cr_alignment & CR_V)
+#else
+#define vectors_high()	(0)
+#endif
+
+extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
+extern unsigned long cr_alignment;	/* defined in entry-armv.S */
+
+static inline unsigned int get_cr(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
+	  : : "r" (val) : "cc");
+	isb();
+}
+
+#ifndef CONFIG_SMP
+extern void adjust_cr(unsigned long mask, unsigned long set);
+#endif
+
+#define CPACC_FULL(n)		(3 << (n * 2))
+#define CPACC_SVC(n)		(1 << (n * 2))
+#define CPACC_DISABLE(n)	(0 << (n * 2))
+
+static inline unsigned int get_copro_access(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
+	  : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_copro_access(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
+	  : : "r" (val) : "cc");
+	isb();
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index e4c96cc6ec0c..774c41e8addf 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -14,37 +14,6 @@
 #define CPU_ARCH_ARMv6		8
 #define CPU_ARCH_ARMv7		9
 
-/*
- * CR1 bits (CP#15 CR1)
- */
-#define CR_M	(1 << 0)	/* MMU enable				*/
-#define CR_A	(1 << 1)	/* Alignment abort enable		*/
-#define CR_C	(1 << 2)	/* Dcache enable			*/
-#define CR_W	(1 << 3)	/* Write buffer enable			*/
-#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
-#define CR_D	(1 << 5)	/* 32-bit data address range		*/
-#define CR_L	(1 << 6)	/* Implementation defined		*/
-#define CR_B	(1 << 7)	/* Big endian				*/
-#define CR_S	(1 << 8)	/* System MMU protection		*/
-#define CR_R	(1 << 9)	/* ROM MMU protection			*/
-#define CR_F	(1 << 10)	/* Implementation defined		*/
-#define CR_Z	(1 << 11)	/* Implementation defined		*/
-#define CR_I	(1 << 12)	/* Icache enable			*/
-#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
-#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
-#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
-#define CR_DT	(1 << 16)
-#define CR_IT	(1 << 18)
-#define CR_ST	(1 << 19)
-#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
-#define CR_U	(1 << 22)	/* Unaligned access operation		*/
-#define CR_XP	(1 << 23)	/* Extended page tables			*/
-#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
-#define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
-#define CR_TRE	(1 << 28)	/* TEX remap enable			*/
-#define CR_AFE	(1 << 29)	/* Access flag enable			*/
-#define CR_TE	(1 << 30)	/* Thumb exception enable		*/
-
 /*
  * This is used to ensure the compiler did actually allocate the register we
  * asked it for some inline assembly sequences.  Apparently we can't trust
@@ -119,12 +88,6 @@ extern void (*arm_pm_restart)(char str, const char *cmd);
 
 extern unsigned int user_debug;
 
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high()	(cr_alignment & CR_V)
-#else
-#define vectors_high()	(0)
-#endif
-
 #if __LINUX_ARM_ARCH__ >= 7 ||		\
 	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
 #define sev()	__asm__ __volatile__ ("sev" : : : "memory")
@@ -185,46 +148,6 @@ extern unsigned int user_debug;
 #define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
-extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
-extern unsigned long cr_alignment;	/* defined in entry-armv.S */
-
-static inline unsigned int get_cr(void)
-{
-	unsigned int val;
-	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
-	return val;
-}
-
-static inline void set_cr(unsigned int val)
-{
-	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
-	  : : "r" (val) : "cc");
-	isb();
-}
-
-#ifndef CONFIG_SMP
-extern void adjust_cr(unsigned long mask, unsigned long set);
-#endif
-
-#define CPACC_FULL(n)		(3 << (n * 2))
-#define CPACC_SVC(n)		(1 << (n * 2))
-#define CPACC_DISABLE(n)	(0 << (n * 2))
-
-static inline unsigned int get_copro_access(void)
-{
-	unsigned int val;
-	asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
-	  : "=r" (val) : : "cc");
-	return val;
-}
-
-static inline void set_copro_access(unsigned int val)
-{
-	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
-	  : : "r" (val) : "cc");
-	isb();
-}
-
 /*
  * switch_mm() may do a full cache flush over the context switch,
  * so enable interrupts over the context switch to avoid high
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 4c164ece5891..c32f8456aa09 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -42,9 +42,9 @@
 #include <linux/seq_file.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <asm/fiq.h>
 #include <asm/irq.h>
-#include <asm/system.h>
 #include <asm/traps.h>
 
 static unsigned long no_fiq_insn;
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index d46f25968bec..278cfc144f44 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -17,8 +17,8 @@
 #include <asm/assembler.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
+#include <asm/cp15.h>
 #include <asm/thread_info.h>
-#include <asm/system.h>
 
 /*
  * Kernel startup entry point.
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 6d5791144066..a2e9694a68ee 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -15,12 +15,12 @@
 #include <linux/init.h>
 
 #include <asm/assembler.h>
+#include <asm/cp15.h>
 #include <asm/domain.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/memory.h>
 #include <asm/thread_info.h>
-#include <asm/system.h>
 #include <asm/pgtable.h>
 
 #ifdef CONFIG_DEBUG_LL
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 9b65cb4589e2..e5c37fc1d1d6 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -34,6 +34,7 @@
 #include <linux/sort.h>
 
 #include <asm/unified.h>
+#include <asm/cp15.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
@@ -45,7 +46,6 @@
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
 #include <asm/tlbflush.h>
-#include <asm/system.h>
 
 #include <asm/prom.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index da70e7e39937..c9146fa7f22d 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 
 #include <mach/regs-pmu.h>
 
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index ac1aed2a8da4..5e64fbf8d0ec 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 
 extern volatile int pen_release;
 
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index f3294040d357..d8dc9ddd6d18 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -13,6 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 
 static inline void cpu_enter_lowpower(void)
 {
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index 813ee08f96e6..7a05548544c3 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -13,7 +13,7 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/system.h>
+#include <asm/cp15.h>
 
 extern volatile int pen_release;
 
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index caf14dc059e5..78459b8a2a1d 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -22,7 +22,7 @@
 #include <linux/sched.h>
 #include <linux/uaccess.h>
 
-#include <asm/system.h>
+#include <asm/cp15.h>
 #include <asm/unaligned.h>
 
 #include "fault.h"
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index e0b0e7a4ec68..dd3d59122cc3 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <plat/cache-feroceon-l2.h>
 
 /*
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 50868651890f..1fbca05fe906 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -16,6 +16,7 @@
 
 #include <linux/init.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <asm/hardware/cache-tauros2.h>
 
 
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 5a32020471e3..6c3edeb66e74 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -18,7 +18,7 @@
  */
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <asm/system.h>
+#include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 80632e8d7538..66daf17b5e33 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,6 +26,7 @@
 #include <linux/vmalloc.h>
 #include <linux/io.h>
 
+#include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
 #include <asm/mmu_context.h>
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index c1263adc2a26..f77f1dbbdf59 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -17,6 +17,7 @@
 #include <linux/fs.h>
 #include <linux/vmalloc.h>
 
+#include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/sections.h>
 #include <asm/cachetype.h>
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index a3e78ccabd65..0acb089d0f70 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <linux/slab.h>
 
+#include <asm/cp15.h>
 #include <asm/pgalloc.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 8f3ccddbdafd..d89068f6d6e5 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 
+#include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/thread_notify.h>
 #include <asm/vfp.h>
-- 
cgit v1.2.3


From f9d4861fc32b995b1616775614459b8f266c803c Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 20 Jan 2012 12:01:13 +0100
Subject: ARM: 7294/1: vectors: use gate_vma for vectors user mapping

The current user mapping for the vectors page is inserted as a `horrible
hack vma' into each task via arch_setup_additional_pages. This causes
problems with the MM subsystem and vm_normal_page, as described here:

https://lkml.org/lkml/2012/1/14/55

Following the suggestion from Hugh in the above thread, this patch uses
the gate_vma for the vectors user mapping, therefore consolidating
the horrible hack VMAs into one.

Acked-and-Tested-by: Nicolas Pitre <nico@linaro.org>

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/elf.h         |  4 ----
 arch/arm/include/asm/mmu_context.h | 29 +----------------------------
 arch/arm/include/asm/page.h        |  2 ++
 arch/arm/kernel/process.c          | 38 ++++++++++++++++++++++++++++----------
 4 files changed, 31 insertions(+), 42 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 0e9ce8d9686e..38050b1c4800 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -130,8 +130,4 @@ struct mm_struct;
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
-extern int vectors_user_mapping(void);
-#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-
 #endif
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 71605d9f8e42..a0b3cac0547c 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -18,6 +18,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
 #include <asm/proc-fns.h>
+#include <asm-generic/mm_hooks.h>
 
 void __check_kvm_seq(struct mm_struct *mm);
 
@@ -133,32 +134,4 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #define deactivate_mm(tsk,mm)	do { } while (0)
 #define activate_mm(prev,next)	switch_mm(prev, next, NULL)
 
-/*
- * We are inserting a "fake" vma for the user-accessible vector page so
- * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
- * But we also want to remove it before the generic code gets to see it
- * during process exit or the unmapping of it would  cause total havoc.
- * (the macro is used as remove_vma() is static to mm/mmap.c)
- */
-#define arch_exit_mmap(mm) \
-do { \
-	struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
-	if (high_vma) { \
-		BUG_ON(high_vma->vm_next);  /* it should be last */ \
-		if (high_vma->vm_prev) \
-			high_vma->vm_prev->vm_next = NULL; \
-		else \
-			mm->mmap = NULL; \
-		rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
-		mm->mmap_cache = NULL; \
-		mm->map_count--; \
-		remove_vma(high_vma); \
-	} \
-} while (0)
-
-static inline void arch_dup_mmap(struct mm_struct *oldmm,
-				 struct mm_struct *mm)
-{
-}
-
 #endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 97b440c25c58..5838361c48b3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -151,6 +151,8 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+#define __HAVE_ARCH_GATE_AREA 1
+
 #ifdef CONFIG_ARM_LPAE
 #include <asm/pgtable-3level-types.h>
 #else
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 971d65c253a9..e11b523db332 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -526,22 +526,40 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 #ifdef CONFIG_MMU
 /*
  * The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code.  Let's declare a mapping
- * for it so it is visible through ptrace and /proc/<pid>/mem.
+ * atomic helpers and the signal restart code. Insert it into the
+ * gate_vma so that it is visible through ptrace and /proc/<pid>/mem.
  */
+static struct vm_area_struct gate_vma;
 
-int vectors_user_mapping(void)
+static int __init gate_vma_init(void)
 {
-	struct mm_struct *mm = current->mm;
-	return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
-				       VM_READ | VM_EXEC |
-				       VM_MAYREAD | VM_MAYEXEC |
-				       VM_ALWAYSDUMP | VM_RESERVED,
-				       NULL);
+	gate_vma.vm_start	= 0xffff0000;
+	gate_vma.vm_end		= 0xffff0000 + PAGE_SIZE;
+	gate_vma.vm_page_prot	= PAGE_READONLY_EXEC;
+	gate_vma.vm_flags	= VM_READ | VM_EXEC |
+				  VM_MAYREAD | VM_MAYEXEC |
+				  VM_ALWAYSDUMP;
+	return 0;
+}
+arch_initcall(gate_vma_init);
+
+struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
+{
+	return &gate_vma;
+}
+
+int in_gate_area(struct mm_struct *mm, unsigned long addr)
+{
+	return (addr >= gate_vma.vm_start) && (addr < gate_vma.vm_end);
+}
+
+int in_gate_area_no_mm(unsigned long addr)
+{
+	return in_gate_area(NULL, addr);
 }
 
 const char *arch_vma_name(struct vm_area_struct *vma)
 {
-	return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
+	return (vma == &gate_vma) ? "[vectors]" : NULL;
 }
 #endif
-- 
cgit v1.2.3


From a9d6d15131b0519363b0c94734ee80955c411093 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 31 Jan 2012 23:38:23 +0100
Subject: ARM: 7310/1: integrator: implement sched_clock across all boards

Now that we can select a sched_clock at runtime, let's implement
it for the Integrator AP, default-select the one found in all
other board it for all plat-versatile boards and make the right
clock kick in at runtime.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-integrator/Kconfig         | 1 +
 arch/arm/mach-integrator/integrator_ap.c | 7 +++++++
 arch/arm/plat-versatile/Kconfig          | 2 +-
 3 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 350e26636a06..5a6148ab6dac 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -5,6 +5,7 @@ menu "Integrator Options"
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010
 	select SERIAL_AMBA_PL010_CONSOLE
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 21a1d6cbef40..4dde28b9dc07 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -42,6 +42,7 @@
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
+#include <asm/sched_clock.h>
 
 #include <mach/lm.h>
 
@@ -325,6 +326,11 @@ static void __init ap_init(void)
 
 static unsigned long timer_reload;
 
+static u32 notrace integrator_read_sched_clock(void)
+{
+	return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
+}
+
 static void integrator_clocksource_init(unsigned long inrate)
 {
 	void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
@@ -341,6 +347,7 @@ static void integrator_clocksource_init(unsigned long inrate)
 
 	clocksource_mmio_init(base + TIMER_VALUE, "timer2",
 			rate, 200, 16, clocksource_mmio_readl_down);
+	setup_sched_clock(integrator_read_sched_clock, 16, rate);
 }
 
 static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 52353beb369d..aa63f38f2848 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -11,7 +11,7 @@ config PLAT_VERSATILE_LEDS
 	depends on ARCH_REALVIEW || ARCH_VERSATILE
 
 config PLAT_VERSATILE_SCHED_CLOCK
-	def_bool y if !ARCH_INTEGRATOR_AP
+	def_bool y
 	select HAVE_SCHED_CLOCK
 
 endif
-- 
cgit v1.2.3


From f5f5195487affe53f90d99cba4aee73a20cae565 Mon Sep 17 00:00:00 2001
From: Dave Martin <dave.martin@linaro.org>
Date: Wed, 1 Feb 2012 10:42:22 +0100
Subject: ARM: 7311/1: Add generic instruction opcode manipulation helpers

This patch adds some endianness-agnostic helpers to convert machine
instructions between canonical integer form and in-memory
representation.

A canonical integer form for representing instructions is also
formalised here.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/opcodes.h | 59 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
index c0efdd60966f..19c48deda70f 100644
--- a/arch/arm/include/asm/opcodes.h
+++ b/arch/arm/include/asm/opcodes.h
@@ -17,4 +17,63 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
 #define ARM_OPCODE_CONDTEST_PASS   1
 #define ARM_OPCODE_CONDTEST_UNCOND 2
 
+
+/*
+ * Opcode byteswap helpers
+ *
+ * These macros help with converting instructions between a canonical integer
+ * format and in-memory representation, in an endianness-agnostic manner.
+ *
+ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
+ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
+ *
+ *
+ * Canonical instruction representation:
+ *
+ *	ARM:		0xKKLLMMNN
+ *	Thumb 16-bit:	0x0000KKLL, where KK < 0xE8
+ *	Thumb 32-bit:	0xKKLLMMNN, where KK >= 0xE8
+ *
+ * There is no way to distinguish an ARM instruction in canonical representation
+ * from a Thumb instruction (just as these cannot be distinguished in memory).
+ * Where this distinction is important, it needs to be tracked separately.
+ *
+ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
+ * represent any valid Thumb-2 instruction.  For this range,
+ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define __opcode_to_mem_arm(x) swab32(x)
+#define __opcode_to_mem_thumb16(x) swab16(x)
+#define __opcode_to_mem_thumb32(x) swahb32(x)
+#else
+#define __opcode_to_mem_arm(x) ((u32)(x))
+#define __opcode_to_mem_thumb16(x) ((u16)(x))
+#define __opcode_to_mem_thumb32(x) swahw32(x)
+#endif
+
+#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
+#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
+#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
+
+/* Operations specific to Thumb opcodes */
+
+/* Instruction size checks: */
+#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL)
+#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL)
+
+/* Operations to construct or split 32-bit Thumb instructions: */
+#define __opcode_thumb32_first(x) ((u16)((x) >> 16))
+#define __opcode_thumb32_second(x) ((u16)(x))
+#define __opcode_thumb32_compose(first, second) \
+	(((u32)(u16)(first) << 16) | (u32)(u16)(second))
+
+#endif /* __ASSEMBLY__ */
+
 #endif /* __ASM_ARM_OPCODES_H */
-- 
cgit v1.2.3


From a7f464f3db93ae5492bee6f6e48939fd8a45fa99 Mon Sep 17 00:00:00 2001
From: Imre Kaloz <kaloz@openwrt.org>
Date: Thu, 26 Jan 2012 13:08:57 +0100
Subject: ARM: 7001/2: Wire up support for the XZ decompressor

Wire up support for the XZ decompressor

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                        |  1 +
 arch/arm/boot/compressed/.gitignore     |  2 ++
 arch/arm/boot/compressed/Makefile       | 15 ++++++++++++---
 arch/arm/boot/compressed/decompress.c   |  6 ++++++
 arch/arm/boot/compressed/piggy.xzkern.S |  6 ++++++
 5 files changed, 27 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/compressed/piggy.xzkern.S

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 24626b0419ee..385a3861a029 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -21,6 +21,7 @@ config ARM
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_XZ
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index e0936a148516..d0d441c429ae 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,8 +1,10 @@
+ashldi3.S
 font.c
 lib1funcs.S
 piggy.gzip
 piggy.lzo
 piggy.lzma
+piggy.xzkern
 vmlinux
 vmlinux.lds
 
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index cf0a64ce4b83..bb267562e7ed 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -92,6 +92,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 suffix_$(CONFIG_KERNEL_GZIP) = gzip
 suffix_$(CONFIG_KERNEL_LZO)  = lzo
 suffix_$(CONFIG_KERNEL_LZMA) = lzma
+suffix_$(CONFIG_KERNEL_XZ)   = xzkern
 
 # Borrowed libfdt files for the ATAG compatibility mode
 
@@ -112,10 +113,12 @@ endif
 
 targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
+		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \
+		 font.o font.c head.o misc.o $(OBJS)
 
 # Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
+extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \
+		 lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -151,6 +154,12 @@ lib1funcs = $(obj)/lib1funcs.o
 $(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
 	$(call cmd,shipped)
 
+# For __aeabi_llsl
+ashldi3 = $(obj)/ashldi3.o
+
+$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
+	$(call cmd,shipped)
+
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -172,7 +181,7 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 fi
 
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
-	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 07be5a2f8302..f41b38cafce8 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -44,6 +44,12 @@ extern void error(char *);
 #include "../../../../lib/decompress_unlzma.c"
 #endif
 
+#ifdef CONFIG_KERNEL_XZ
+#define memmove memmove
+#define memcpy memcpy
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
 int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
 	return decompress(input, len, NULL, NULL, output, NULL, error);
diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S
new file mode 100644
index 000000000000..5703f300d027
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.xzkern.S
@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.xzkern"
+	.globl	input_data_end
+input_data_end:
-- 
cgit v1.2.3


From d9277d51a8eeaa097d3c1385f458c99d65ffc4f4 Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Wed, 1 Feb 2012 11:16:51 +0100
Subject: ARM: 7312/1: only show modules in the memory layout for MODULES=y
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This line is irritating and wrong when modules are not supported, so
don't show it then.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/init.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 6ec1226fc62d..42d906f89964 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -659,7 +659,9 @@ void __init mem_init(void)
 #ifdef CONFIG_HIGHMEM
 			"    pkmap   : 0x%08lx - 0x%08lx   (%4ld MB)\n"
 #endif
+#ifdef CONFIG_MODULES
 			"    modules : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+#endif
 			"      .text : 0x%p" " - 0x%p" "   (%4d kB)\n"
 			"      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
 			"      .data : 0x%p" " - 0x%p" "   (%4d kB)\n"
@@ -678,7 +680,9 @@ void __init mem_init(void)
 			MLM(PKMAP_BASE, (PKMAP_BASE) + (LAST_PKMAP) *
 				(PAGE_SIZE)),
 #endif
+#ifdef CONFIG_MODULES
 			MLM(MODULES_VADDR, MODULES_END),
+#endif
 
 			MLK_ROUNDUP(_text, _etext),
 			MLK_ROUNDUP(__init_begin, __init_end),
-- 
cgit v1.2.3


From 87067a935a174cf5e0b336d338a0ab535ffe199d Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 4 Feb 2012 10:55:38 +0000
Subject: ARM: Optimize multi-CPU tlb flushing a little more

The compiler does not conditionalize the assembly instructions for
the tlb operations, which leads to sub-optimal code being generated
when building a kernel for multiple CPUs.

We can tweak things fairly simply as the code fragment below shows:

    17f8:       e3120001        tst     r2, #1  ; 0x1
...
    1800:       0a000000        beq     1808 <handle_pte_fault+0x194>
    1804:       ee061f10        mcr     15, 0, r1, cr6, cr0, {0}
    1808:       e3120004        tst     r2, #4  ; 0x4
    180c:       0a000000        beq     1814 <handle_pte_fault+0x1a0>
    1810:       ee081f36        mcr     15, 0, r1, cr8, cr6, {1}
becomes:
    17f0:       e3120001        tst     r2, #1  ; 0x1
    17f4:       1e063f10        mcrne   15, 0, r3, cr6, cr0, {0}
    17f8:       e3120004        tst     r2, #4  ; 0x4
    17fc:       1e083f36        mcrne   15, 0, r3, cr8, cr6, {1}

Overall, for Realview with V6 and V7 CPUs configured:

   text    data     bss     dec     hex filename
4153998  207340 5371036 9732374  948116 ../build/realview/vmlinux.before
4153366  207332 5371036 9731734  947e96 ../build/realview/vmlinux.after

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/tlbflush.h | 136 +++++++++++++++++-----------------------
 1 file changed, 58 insertions(+), 78 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 02b2f8203982..85fe61e73202 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -318,6 +318,21 @@ extern struct cpu_tlb_fns cpu_tlb;
 
 #define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
 
+#define __tlb_op(f, insnarg, arg)					\
+	do {								\
+		if (always_tlb_flags & (f))				\
+			asm("mcr " insnarg				\
+			    : : "r" (arg) : "cc");			\
+		else if (possible_tlb_flags & (f))			\
+			asm("tst %1, %2\n\t"				\
+			    "mcrne " insnarg				\
+			    : : "r" (arg), "r" (__tlb_flag), "Ir" (f)	\
+			    : "cc");					\
+	} while (0)
+
+#define tlb_op(f, regs, arg)	__tlb_op(f, "p15, 0, %0, " regs, arg)
+#define tlb_l2_op(f, regs, arg)	__tlb_op(f, "p15, 1, %0, " regs, arg)
+
 static inline void local_flush_tlb_all(void)
 {
 	const int zero = 0;
@@ -326,16 +341,11 @@ static inline void local_flush_tlb_all(void)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (tlb_flag(TLB_V3_FULL))
-		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
-		asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
-		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
-		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-	if (tlb_flag(TLB_V7_UIS_FULL))
-		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
+	tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
+	tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero);
+	tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero);
+	tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero);
+	tlb_op(TLB_V7_UIS_FULL, "c8, c3, 0", zero);
 
 	if (tlb_flag(TLB_BARRIER)) {
 		dsb();
@@ -352,29 +362,23 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
-		if (tlb_flag(TLB_V3_FULL))
-			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_U_FULL))
-			asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_D_FULL))
-			asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
-		if (tlb_flag(TLB_V4_I_FULL))
-			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
+		if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
+			tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
+			tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero);
+			tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero);
+			tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero);
+		}
+		put_cpu();
 	}
-	put_cpu();
-
-	if (tlb_flag(TLB_V6_U_ASID))
-		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
-	if (tlb_flag(TLB_V6_D_ASID))
-		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
-	if (tlb_flag(TLB_V6_I_ASID))
-		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
-	if (tlb_flag(TLB_V7_UIS_ASID))
+
+	tlb_op(TLB_V6_U_ASID, "c8, c7, 2", asid);
+	tlb_op(TLB_V6_D_ASID, "c8, c6, 2", asid);
+	tlb_op(TLB_V6_I_ASID, "c8, c5, 2", asid);
 #ifdef CONFIG_ARM_ERRATA_720789
-		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
+	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 0", zero);
 #else
-		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
+	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 2", asid);
 #endif
 
 	if (tlb_flag(TLB_BARRIER))
@@ -392,30 +396,23 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-		if (tlb_flag(TLB_V3_PAGE))
-			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_U_PAGE))
-			asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_D_PAGE))
-			asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
-		if (tlb_flag(TLB_V4_I_PAGE))
-			asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+	if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
+	    cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+		tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr);
+		tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr);
+		tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr);
+		tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr);
 		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
 			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
 	}
 
-	if (tlb_flag(TLB_V6_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
-	if (tlb_flag(TLB_V6_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
-	if (tlb_flag(TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
-	if (tlb_flag(TLB_V7_UIS_PAGE))
+	tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", uaddr);
+	tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", uaddr);
+	tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", uaddr);
 #ifdef CONFIG_ARM_ERRATA_720789
-		asm("mcr p15, 0, %0, c8, c3, 3" : : "r" (uaddr & PAGE_MASK) : "cc");
+	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 3", uaddr & PAGE_MASK);
 #else
-		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
+	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", uaddr);
 #endif
 
 	if (tlb_flag(TLB_BARRIER))
@@ -432,25 +429,17 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (tlb_flag(TLB_V3_PAGE))
-		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V4_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr);
+	tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr);
+	tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr);
+	tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr);
 	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
 
-	if (tlb_flag(TLB_V6_U_PAGE))
-		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V6_D_PAGE))
-		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
-	if (tlb_flag(TLB_V7_UIS_PAGE))
-		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
+	tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", kaddr);
+	tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", kaddr);
+	tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", kaddr);
+	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", kaddr);
 
 	if (tlb_flag(TLB_BARRIER)) {
 		dsb();
@@ -475,13 +464,8 @@ static inline void flush_pmd_entry(void *pmd)
 {
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
-	if (tlb_flag(TLB_DCLEAN))
-		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_L2CLEAN_FR))
-		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-			: : "r" (pmd) : "cc");
+	tlb_op(TLB_DCLEAN, "c7, c10, 1	@ flush_pmd", pmd);
+	tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1  @ L2 flush_pmd", pmd);
 
 	if (tlb_flag(TLB_WB))
 		dsb();
@@ -491,15 +475,11 @@ static inline void clean_pmd_entry(void *pmd)
 {
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
-	if (tlb_flag(TLB_DCLEAN))
-		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
-			: : "r" (pmd) : "cc");
-
-	if (tlb_flag(TLB_L2CLEAN_FR))
-		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
-			: : "r" (pmd) : "cc");
+	tlb_op(TLB_DCLEAN, "c7, c10, 1	@ flush_pmd", pmd);
+	tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1  @ L2 flush_pmd", pmd);
 }
 
+#undef tlb_op
 #undef tlb_flag
 #undef always_tlb_flags
 #undef possible_tlb_flags
-- 
cgit v1.2.3


From 8211ca658728d03ba331de0276950289e52a1b0f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 4 Feb 2012 12:12:11 +0000
Subject: ARM: Add compiled ISA to oops dumps

Add the compiled ISA to oops dumps, along side the preempt/smp
configuration.  This allows us to see immediately whether the kernel
was compiled for Thumb-2 or not.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index be15dafaa881..23377a3bf50d 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -227,6 +227,11 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 #else
 #define S_SMP ""
 #endif
+#ifdef CONFIG_THUMB2_KERNEL
+#define S_ISA " THUMB2"
+#else
+#define S_ISA " ARM"
+#endif
 
 static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
 {
@@ -234,8 +239,8 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt
 	static int die_counter;
 	int ret;
 
-	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
-	       str, err, ++die_counter);
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP
+	       S_ISA "\n", str, err, ++die_counter);
 
 	/* trap and error numbers are mostly meaningless on ARM */
 	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
-- 
cgit v1.2.3


From f153d017ab70d2954f5456278f3cbc39e6e060f3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sat, 4 Feb 2012 12:31:27 +0000
Subject: ARM: sync sched_clock() state on suspend

Ensure that the software state for sched_clock() is updated at the
point of suspend so that we avoid losing ticks since the last update.

This prevents the platform dependent possibility that sched_clock()
may appear to go backwards across a suspend/resume cycle.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/sched_clock.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 5416c7c12528..27d186abbc06 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -10,6 +10,7 @@
 #include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/syscore_ops.h>
 #include <linux/timer.h>
 
 #include <asm/sched_clock.h>
@@ -164,3 +165,20 @@ void __init sched_clock_postinit(void)
 
 	sched_clock_poll(sched_clock_timer.data);
 }
+
+static int sched_clock_suspend(void)
+{
+	sched_clock_poll(sched_clock_timer.data);
+	return 0;
+}
+
+static struct syscore_ops sched_clock_ops = {
+	.suspend = sched_clock_suspend,
+};
+
+static int __init sched_clock_syscore_init(void)
+{
+	register_syscore_ops(&sched_clock_ops);
+	return 0;
+}
+device_initcall(sched_clock_syscore_init);
-- 
cgit v1.2.3


From d33c88c659d708e7c5d518a05ef9349a36217bb2 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 3 Feb 2012 14:46:01 +0100
Subject: ARM: 7315/1: perf: add support for the Cortex-A7 PMU

Cortex-A7 implements an ARMv7-compatible PMU compliant with the PMUv2
architecture specification.

This patch adds support for the PMU to the ARM perf backend.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/perf_event.h |   1 +
 arch/arm/kernel/perf_event.c      |   3 +
 arch/arm/kernel/perf_event_v7.c   | 145 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 149 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 99cfe3607989..ee7c056be3f4 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -26,6 +26,7 @@ enum arm_perf_pmu_ids {
 	ARM_PERF_PMU_ID_CA9,
 	ARM_PERF_PMU_ID_CA5,
 	ARM_PERF_PMU_ID_CA15,
+	ARM_PERF_PMU_ID_CA7,
 	ARM_NUM_PMU_IDS,
 };
 
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 5bb91bf3d47f..ab59c3bae5e8 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -712,6 +712,9 @@ init_hw_perf_events(void)
 		case 0xC0F0:	/* Cortex-A15 */
 			cpu_pmu = armv7_a15_pmu_init();
 			break;
+		case 0xC070:	/* Cortex-A7 */
+			cpu_pmu = armv7_a7_pmu_init();
+			break;
 		}
 	/* Intel CPUs [xscale]. */
 	} else if (0x69 == implementor) {
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 460bbbb6b885..b2b764ec011b 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -581,6 +581,130 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	},
 };
 
+/*
+ * Cortex-A7 HW events mapping
+ */
+static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					[PERF_COUNT_HW_CACHE_OP_MAX]
+					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_CACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_CACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
 /*
  * Perf Events' indices
  */
@@ -1067,6 +1191,12 @@ static int armv7_a15_map_event(struct perf_event *event)
 				&armv7_a15_perf_cache_map, 0xFF);
 }
 
+static int armv7_a7_map_event(struct perf_event *event)
+{
+	return map_cpu_event(event, &armv7_a7_perf_map,
+				&armv7_a7_perf_cache_map, 0xFF);
+}
+
 static struct arm_pmu armv7pmu = {
 	.handle_irq		= armv7pmu_handle_irq,
 	.enable			= armv7pmu_enable_event,
@@ -1127,6 +1257,16 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void)
 	armv7pmu.set_event_filter = armv7pmu_set_event_filter;
 	return &armv7pmu;
 }
+
+static struct arm_pmu *__init armv7_a7_pmu_init(void)
+{
+	armv7pmu.id		= ARM_PERF_PMU_ID_CA7;
+	armv7pmu.name		= "ARMv7 Cortex-A7";
+	armv7pmu.map_event	= armv7_a7_map_event;
+	armv7pmu.num_events	= armv7_read_num_pmnc_events();
+	armv7pmu.set_event_filter = armv7pmu_set_event_filter;
+	return &armv7pmu;
+}
 #else
 static struct arm_pmu *__init armv7_a8_pmu_init(void)
 {
@@ -1147,4 +1287,9 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void)
 {
 	return NULL;
 }
+
+static struct arm_pmu *__init armv7_a7_pmu_init(void)
+{
+	return NULL;
+}
 #endif	/* CONFIG_CPU_V7 */
-- 
cgit v1.2.3


From 342d00ae2b85af003f11036484a33e12e906fe92 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 3 Feb 2012 14:50:07 +0100
Subject: ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop

ARM unconditionally selects CONFIG_GENERIC_HARDIRQS, so the definition
of for_each_irq_desc will check that the desc is non-NULL anyway.

This patch removes a redundant check from the IRQ migration code.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/irq.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 3efd82cc95f0..3f86ee11f54e 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -181,10 +181,7 @@ void migrate_irqs(void)
 	local_irq_save(flags);
 
 	for_each_irq_desc(i, desc) {
-		bool affinity_broken = false;
-
-		if (!desc)
-			continue;
+		bool affinity_broken;
 
 		raw_spin_lock(&desc->lock);
 		affinity_broken = migrate_one_irq(desc);
-- 
cgit v1.2.3


From e0b823e9a543527dbb0f806252ee03a60f2aefbc Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 3 Feb 2012 14:52:14 +0100
Subject: ARM: 7318/1: gic: refactor irq_start assignment

The irq_start and hwirq_base assignment code is fairly hairy and ended
up being difficult to read following a conflict resolution for 3.2.

This patch rearranges the code slightly to make it easier to read.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/gic.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index b2dc2dd7f1df..a3bc86fa3156 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -697,13 +697,12 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 	 * For primary GICs, skip over SGIs.
 	 * For secondary GICs, skip over PPIs, too.
 	 */
-	domain->hwirq_base = 32;
-	if (gic_nr == 0) {
-		if ((irq_start & 31) > 0) {
-			domain->hwirq_base = 16;
-			if (irq_start != -1)
-				irq_start = (irq_start & ~31) + 16;
-		}
+	if (gic_nr == 0 && (irq_start & 31) > 0) {
+		domain->hwirq_base = 16;
+		if (irq_start != -1)
+			irq_start = (irq_start & ~31) + 16;
+	} else {
+		domain->hwirq_base = 32;
 	}
 
 	/*
-- 
cgit v1.2.3


From f5274c2d0d8d91076af8605187d762dfa0b92825 Mon Sep 17 00:00:00 2001
From: Javi Merino <javi.merino@arm.com>
Date: Mon, 6 Feb 2012 15:45:36 +0100
Subject: ARM: 7319/1: Print debug info for SIGBUS in user faults

Print debug information on user faults for SIGBUS if user_debug = 16
in the kernel command line.

Reference: <1327333344-26340-1-git-send-email-javi.merino@arm.com>

Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index bb7eac381a8e..40c43a94ba72 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -164,7 +164,8 @@ __do_user_fault(struct task_struct *tsk, unsigned long addr,
 	struct siginfo si;
 
 #ifdef CONFIG_DEBUG_USER
-	if (user_debug & UDBG_SEGV) {
+	if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) ||
+	    ((user_debug & UDBG_BUS)  && (sig == SIGBUS))) {
 		printk(KERN_DEBUG "%s: unhandled page fault (%d) at 0x%08lx, code 0x%03x\n",
 		       tsk->comm, sig, addr, fsr);
 		show_pte(tsk->mm, addr);
-- 
cgit v1.2.3


From 5936d1161ff503a1170722fe9b2d9ac4da700eef Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 9 Feb 2012 16:16:28 +0000
Subject: ARM: get rid of asm/irq.h in asm/prom.h

Avoid potential build problems caused by lacking mach/irqs.h includes
on non-OF builds caused by an errant include in asm/prom.h.  asm/prom.h
requires nothing from asm/irq.h, as Grant says:

On Mon, Feb 06, 2012 at 05:56:23AM +0000, Grant Likely wrote:
> On Sat, Feb 04, 2012 at 10:17:48PM +0000, Russell King wrote:
> > Finally, do we need asm/irq.h in our asm/prom.h ?  That's causing
> > fragility between DT and non-DT builds, because people are finding
> > that their DT builds work without their mach/irqs.h includes but
> > fail when built with non-DT.  The only thing which DT might need -
> > at the most - is NR_IRQS, but I'd hope with things like irq domains
> > it doesn't actually require it.
>
> I don't think so.  There may be a file or two that break because they're
> not including everything they need, but I don't think anything in the
> header requires it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/prom.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
index ee0363307918..aeae9c609df4 100644
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -13,8 +13,6 @@
 
 #ifdef CONFIG_OF
 
-#include <asm/irq.h>
-
 extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
 extern void arm_dt_memblock_reserve(void);
 
-- 
cgit v1.2.3


From ba81f502e73cee92964af6c39eb8c8d7e44e38c1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 15 Feb 2012 11:55:22 +0000
Subject: ARM: Versatile Express: add NO_IOPORT

On Versatile Express, the PCI Express buses are broken and unusable, so
we aren't going to support PCI/ISA IO cycles on this platform.  Remove
the PCI/ISA IO inb et.al. support for this platform.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                         | 1 +
 arch/arm/mach-vexpress/include/mach/io.h | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 385a3861a029..6b5f84887ce5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -313,6 +313,7 @@ config ARCH_VEXPRESS
 	select HAVE_CLK
 	select HAVE_PATA_PLATFORM
 	select ICST
+	select NO_IOPORT
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD
 	help
diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h
index 13522d86685e..0088cd388a84 100644
--- a/arch/arm/mach-vexpress/include/mach/io.h
+++ b/arch/arm/mach-vexpress/include/mach/io.h
@@ -20,7 +20,6 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)	(a)
 
 #endif
-- 
cgit v1.2.3


From 9141a003a491c7230d17b9c29677ce2be437b95c Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Fri, 3 Feb 2012 14:48:01 +0100
Subject: ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash
 path

The kexec machine crash code can be called in interrupt context via a
sysrq trigger made using the magic key combination. If the irq chip
dealing with the serial interrupt is using the fasteoi flow handler,
then we will never EOI the interrupt because the interrupt handler will
be fatal. In the case of a GIC, this results in the crash kernel not
receiving interrupts on that CPU interface.

This patch adds code (based on the PowerPC implementation) to EOI any
pending interrupts on the crash CPU before masking and disabling all
interrupts. Secondary cores are not a problem since they are placed into
a cpu_relax() loop via an IPI.

Reported-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/machine_kexec.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 764bd456d84f..a30004476e70 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -7,6 +7,7 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
+#include <linux/irq.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -53,6 +54,29 @@ void machine_crash_nonpanic_core(void *unused)
 		cpu_relax();
 }
 
+static void machine_kexec_mask_interrupts(void)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(i, desc) {
+		struct irq_chip *chip;
+
+		chip = irq_desc_get_chip(desc);
+		if (!chip)
+			continue;
+
+		if (chip->irq_eoi && irqd_irq_inprogress(&desc->irq_data))
+			chip->irq_eoi(&desc->irq_data);
+
+		if (chip->irq_mask)
+			chip->irq_mask(&desc->irq_data);
+
+		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
+			chip->irq_disable(&desc->irq_data);
+	}
+}
+
 void machine_crash_shutdown(struct pt_regs *regs)
 {
 	unsigned long msecs;
@@ -70,6 +94,7 @@ void machine_crash_shutdown(struct pt_regs *regs)
 		printk(KERN_WARNING "Non-crashing CPUs did not react to IPI\n");
 
 	crash_save_cpu(regs, smp_processor_id());
+	machine_kexec_mask_interrupts();
 
 	printk(KERN_INFO "Loading crashdump kernel...\n");
 }
-- 
cgit v1.2.3


From dc283d7037555aa6891188719be2f1b4af9535c9 Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Wed, 29 Feb 2012 15:59:07 +0100
Subject: ARM: 7351/1: ftrace: remove useless memory checks

Before replacing an instruction, the ftrace code determines what the old
instruction should be and verifies that that's what's really there in
memory before replacing it.  This is useful if for example a bug in
mcountrecord causes it to record wrong locations.

However, in cases where we replace call sites in entry-common.S, these
checks are not needed.  For these, we currently just memcpy() the memory
content and then "verify" it -- this is quite useless and can be
removed.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/ftrace.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index c0062ad1e847..6fd7c4a1e532 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -121,15 +121,17 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
-			      unsigned long new)
+			      unsigned long new, bool validate)
 {
 	unsigned long replaced;
 
-	if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
-		return -EFAULT;
+	if (validate) {
+		if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
+			return -EFAULT;
 
-	if (replaced != old)
-		return -EINVAL;
+		if (replaced != old)
+			return -EINVAL;
+	}
 
 	if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE))
 		return -EPERM;
@@ -141,23 +143,21 @@ static int ftrace_modify_code(unsigned long pc, unsigned long old,
 
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
-	unsigned long pc, old;
+	unsigned long pc;
 	unsigned long new;
 	int ret;
 
 	pc = (unsigned long)&ftrace_call;
-	memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE);
 	new = ftrace_call_replace(pc, (unsigned long)func);
 
-	ret = ftrace_modify_code(pc, old, new);
+	ret = ftrace_modify_code(pc, 0, new, false);
 
 #ifdef CONFIG_OLD_MCOUNT
 	if (!ret) {
 		pc = (unsigned long)&ftrace_call_old;
-		memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE);
 		new = ftrace_call_replace(pc, (unsigned long)func);
 
-		ret = ftrace_modify_code(pc, old, new);
+		ret = ftrace_modify_code(pc, 0, new, false);
 	}
 #endif
 
@@ -172,7 +172,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	old = ftrace_nop_replace(rec);
 	new = ftrace_call_replace(ip, adjust_address(rec, addr));
 
-	return ftrace_modify_code(rec->ip, old, new);
+	return ftrace_modify_code(rec->ip, old, new, true);
 }
 
 int ftrace_make_nop(struct module *mod,
@@ -185,7 +185,7 @@ int ftrace_make_nop(struct module *mod,
 
 	old = ftrace_call_replace(ip, adjust_address(rec, addr));
 	new = ftrace_nop_replace(rec);
-	ret = ftrace_modify_code(ip, old, new);
+	ret = ftrace_modify_code(ip, old, new, true);
 
 #ifdef CONFIG_OLD_MCOUNT
 	if (ret == -EINVAL && addr == MCOUNT_ADDR) {
@@ -193,7 +193,7 @@ int ftrace_make_nop(struct module *mod,
 
 		old = ftrace_call_replace(ip, adjust_address(rec, addr));
 		new = ftrace_nop_replace(rec);
-		ret = ftrace_modify_code(ip, old, new);
+		ret = ftrace_modify_code(ip, old, new, true);
 	}
 #endif
 
@@ -254,7 +254,7 @@ static int __ftrace_modify_caller(unsigned long *callsite,
 	unsigned long old = enable ? nop : branch;
 	unsigned long new = enable ? branch : nop;
 
-	return ftrace_modify_code(pc, old, new);
+	return ftrace_modify_code(pc, old, new, true);
 }
 
 static int ftrace_modify_graph_caller(bool enable)
-- 
cgit v1.2.3


From 4394e2824c8d97d81a336edb469b13c8806604e4 Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Sat, 18 Feb 2012 17:47:03 +0100
Subject: ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format

As commit 592201a9f15 (ARM: Thumb-2: Support Thumb-2 in undefined
instruction handler) says:

    32-bit Thumb instructions are specified in the form:
        ((first_half << 16 ) | second_half)
    which matches the layout used by the ARM ARM.

Convert the ftrace code to use the same format to avoid the usage of
different formats in kernel code.

Acked-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/ftrace.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 6fd7c4a1e532..5c9cecfaeb21 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -16,10 +16,11 @@
 #include <linux/uaccess.h>
 
 #include <asm/cacheflush.h>
+#include <asm/opcodes.h>
 #include <asm/ftrace.h>
 
 #ifdef CONFIG_THUMB2_KERNEL
-#define	NOP		0xeb04f85d	/* pop.w {lr} */
+#define	NOP		0xf85deb04	/* pop.w {lr} */
 #else
 #define	NOP		0xe8bd4000	/* pop {lr} */
 #endif
@@ -88,7 +89,7 @@ static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
 	if (link)
 		second |= 1 << 14;
 
-	return (second << 16) | first;
+	return __opcode_thumb32_compose(first, second);
 }
 #else
 static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
@@ -125,6 +126,14 @@ static int ftrace_modify_code(unsigned long pc, unsigned long old,
 {
 	unsigned long replaced;
 
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		old = __opcode_to_mem_thumb32(old);
+		new = __opcode_to_mem_thumb32(new);
+	} else {
+		old = __opcode_to_mem_arm(old);
+		new = __opcode_to_mem_arm(new);
+	}
+
 	if (validate) {
 		if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
 			return -EFAULT;
-- 
cgit v1.2.3


From d82227cf8f0b42ff42c21ed47025fdf54cb1698d Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Sat, 18 Feb 2012 17:50:06 +0100
Subject: ARM: 7331/1: extract out insn generation code from ftrace

Extract out the instruction generation code so that it can be used
for jump labels too.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/Makefile |  5 ++--
 arch/arm/kernel/ftrace.c | 61 ++++--------------------------------------------
 arch/arm/kernel/insn.c   | 61 ++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/kernel/insn.h   | 19 +++++++++++++++
 4 files changed, 87 insertions(+), 59 deletions(-)
 create mode 100644 arch/arm/kernel/insn.c
 create mode 100644 arch/arm/kernel/insn.h

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 43b740d0e374..dd3d5f16c147 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -7,6 +7,7 @@ AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_insn.o = -pg
 endif
 
 CFLAGS_REMOVE_return_address.o = -pg
@@ -34,8 +35,8 @@ obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
-obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-common.o
 ifdef CONFIG_THUMB2_KERNEL
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 5c9cecfaeb21..df0bf0c8cb79 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -19,6 +19,8 @@
 #include <asm/opcodes.h>
 #include <asm/ftrace.h>
 
+#include "insn.h"
+
 #ifdef CONFIG_THUMB2_KERNEL
 #define	NOP		0xf85deb04	/* pop.w {lr} */
 #else
@@ -61,64 +63,9 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
 }
 #endif
 
-#ifdef CONFIG_THUMB2_KERNEL
-static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
-				       bool link)
-{
-	unsigned long s, j1, j2, i1, i2, imm10, imm11;
-	unsigned long first, second;
-	long offset;
-
-	offset = (long)addr - (long)(pc + 4);
-	if (offset < -16777216 || offset > 16777214) {
-		WARN_ON_ONCE(1);
-		return 0;
-	}
-
-	s	= (offset >> 24) & 0x1;
-	i1	= (offset >> 23) & 0x1;
-	i2	= (offset >> 22) & 0x1;
-	imm10	= (offset >> 12) & 0x3ff;
-	imm11	= (offset >>  1) & 0x7ff;
-
-	j1 = (!i1) ^ s;
-	j2 = (!i2) ^ s;
-
-	first = 0xf000 | (s << 10) | imm10;
-	second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11;
-	if (link)
-		second |= 1 << 14;
-
-	return __opcode_thumb32_compose(first, second);
-}
-#else
-static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
-				       bool link)
-{
-	unsigned long opcode = 0xea000000;
-	long offset;
-
-	if (link)
-		opcode |= 1 << 24;
-
-	offset = (long)addr - (long)(pc + 8);
-	if (unlikely(offset < -33554432 || offset > 33554428)) {
-		/* Can't generate branches that far (from ARM ARM). Ftrace
-		 * doesn't generate branches outside of kernel text.
-		 */
-		WARN_ON_ONCE(1);
-		return 0;
-	}
-
-	offset = (offset >> 2) & 0x00ffffff;
-
-	return opcode | offset;
-}
-#endif
-
 static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 {
-	return ftrace_gen_branch(pc, addr, true);
+	return arm_gen_branch_link(pc, addr);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
@@ -258,7 +205,7 @@ static int __ftrace_modify_caller(unsigned long *callsite,
 {
 	unsigned long caller_fn = (unsigned long) func;
 	unsigned long pc = (unsigned long) callsite;
-	unsigned long branch = ftrace_gen_branch(pc, caller_fn, false);
+	unsigned long branch = arm_gen_branch(pc, caller_fn);
 	unsigned long nop = 0xe1a00000;	/* mov r0, r0 */
 	unsigned long old = enable ? nop : branch;
 	unsigned long new = enable ? branch : nop;
diff --git a/arch/arm/kernel/insn.c b/arch/arm/kernel/insn.c
new file mode 100644
index 000000000000..ab312e516546
--- /dev/null
+++ b/arch/arm/kernel/insn.c
@@ -0,0 +1,61 @@
+#include <linux/kernel.h>
+#include <asm/opcodes.h>
+
+static unsigned long
+__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
+{
+	unsigned long s, j1, j2, i1, i2, imm10, imm11;
+	unsigned long first, second;
+	long offset;
+
+	offset = (long)addr - (long)(pc + 4);
+	if (offset < -16777216 || offset > 16777214) {
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+
+	s	= (offset >> 24) & 0x1;
+	i1	= (offset >> 23) & 0x1;
+	i2	= (offset >> 22) & 0x1;
+	imm10	= (offset >> 12) & 0x3ff;
+	imm11	= (offset >>  1) & 0x7ff;
+
+	j1 = (!i1) ^ s;
+	j2 = (!i2) ^ s;
+
+	first = 0xf000 | (s << 10) | imm10;
+	second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11;
+	if (link)
+		second |= 1 << 14;
+
+	return __opcode_thumb32_compose(first, second);
+}
+
+static unsigned long
+__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
+{
+	unsigned long opcode = 0xea000000;
+	long offset;
+
+	if (link)
+		opcode |= 1 << 24;
+
+	offset = (long)addr - (long)(pc + 8);
+	if (unlikely(offset < -33554432 || offset > 33554428)) {
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+
+	offset = (offset >> 2) & 0x00ffffff;
+
+	return opcode | offset;
+}
+
+unsigned long
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link)
+{
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL))
+		return __arm_gen_branch_thumb2(pc, addr, link);
+	else
+		return __arm_gen_branch_arm(pc, addr, link);
+}
diff --git a/arch/arm/kernel/insn.h b/arch/arm/kernel/insn.h
new file mode 100644
index 000000000000..994d60fd3ff5
--- /dev/null
+++ b/arch/arm/kernel/insn.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_ARM_INSN_H
+#define __ASM_ARM_INSN_H
+
+unsigned long
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
+
+static inline unsigned long
+arm_gen_branch(unsigned long pc, unsigned long addr)
+{
+	return __arm_gen_branch(pc, addr, false);
+}
+
+static inline unsigned long
+arm_gen_branch_link(unsigned long pc, unsigned long addr)
+{
+	return __arm_gen_branch(pc, addr, true);
+}
+
+#endif
-- 
cgit v1.2.3


From b21d55e98ac2bbcbbeec9a8cb091f717fd95b072 Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Sat, 18 Feb 2012 17:50:51 +0100
Subject: ARM: 7332/1: extract out code patch function from kprobes

Extract out the code patching code from kprobes so that it can be used
from the jump label code.  Additionally, the separated code:

 - Uses the IS_ENABLED() macros instead of the #ifdefs for THUMB2
   support

 - Unifies the two separate functions in kprobes, providing one function
   that uses stop_machine() internally, and one that can be called from
   stop_machine() directly

 - Patches the text on all CPUs only on processors requiring software
   broadcasting of cache operations

Acked-by: Jon Medhurst <tixy@yxit.co.uk>
Tested-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/Makefile  |  3 +-
 arch/arm/kernel/kprobes.c | 86 +++++++++++++----------------------------------
 arch/arm/kernel/patch.c   | 75 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/kernel/patch.h   |  7 ++++
 4 files changed, 108 insertions(+), 63 deletions(-)
 create mode 100644 arch/arm/kernel/patch.c
 create mode 100644 arch/arm/kernel/patch.h

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index dd3d5f16c147..8c63ee8d3c48 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,6 +8,7 @@ AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_insn.o = -pg
+CFLAGS_REMOVE_patch.o = -pg
 endif
 
 CFLAGS_REMOVE_return_address.o = -pg
@@ -38,7 +39,7 @@ obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-common.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-common.o patch.o
 ifdef CONFIG_THUMB2_KERNEL
 obj-$(CONFIG_KPROBES)		+= kprobes-thumb.o
 else
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 129c1163248b..ab1869dac97a 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -29,6 +29,7 @@
 #include <asm/cacheflush.h>
 
 #include "kprobes.h"
+#include "patch.h"
 
 #define MIN_STACK_SIZE(addr) 				\
 	min((unsigned long)MAX_STACK_SIZE,		\
@@ -103,57 +104,33 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	return 0;
 }
 
-#ifdef CONFIG_THUMB2_KERNEL
-
-/*
- * For a 32-bit Thumb breakpoint spanning two memory words we need to take
- * special precautions to insert the breakpoint atomically, especially on SMP
- * systems. This is achieved by calling this arming function using stop_machine.
- */
-static int __kprobes set_t32_breakpoint(void *addr)
-{
-	((u16 *)addr)[0] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION >> 16;
-	((u16 *)addr)[1] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION & 0xffff;
-	flush_insns(addr, 2*sizeof(u16));
-	return 0;
-}
-
 void __kprobes arch_arm_kprobe(struct kprobe *p)
 {
-	uintptr_t addr = (uintptr_t)p->addr & ~1; /* Remove any Thumb flag */
-
-	if (!is_wide_instruction(p->opcode)) {
-		*(u16 *)addr = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION;
-		flush_insns(addr, sizeof(u16));
-	} else if (addr & 2) {
-		/* A 32-bit instruction spanning two words needs special care */
-		stop_machine(set_t32_breakpoint, (void *)addr, &cpu_online_map);
+	unsigned int brkp;
+	void *addr;
+
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		/* Remove any Thumb flag */
+		addr = (void *)((uintptr_t)p->addr & ~1);
+
+		if (is_wide_instruction(p->opcode))
+			brkp = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION;
+		else
+			brkp = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION;
 	} else {
-		/* Word aligned 32-bit instruction can be written atomically */
-		u32 bkp = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION;
-#ifndef __ARMEB__ /* Swap halfwords for little-endian */
-		bkp = (bkp >> 16) | (bkp << 16);
-#endif
-		*(u32 *)addr = bkp;
-		flush_insns(addr, sizeof(u32));
-	}
-}
+		kprobe_opcode_t insn = p->opcode;
 
-#else /* !CONFIG_THUMB2_KERNEL */
+		addr = p->addr;
+		brkp = KPROBE_ARM_BREAKPOINT_INSTRUCTION;
 
-void __kprobes arch_arm_kprobe(struct kprobe *p)
-{
-	kprobe_opcode_t insn = p->opcode;
-	kprobe_opcode_t brkp = KPROBE_ARM_BREAKPOINT_INSTRUCTION;
-	if (insn >= 0xe0000000)
-		brkp |= 0xe0000000;  /* Unconditional instruction */
-	else
-		brkp |= insn & 0xf0000000;  /* Copy condition from insn */
-	*p->addr = brkp;
-	flush_insns(p->addr, sizeof(p->addr[0]));
-}
+		if (insn >= 0xe0000000)
+			brkp |= 0xe0000000;  /* Unconditional instruction */
+		else
+			brkp |= insn & 0xf0000000;  /* Copy condition from insn */
+	}
 
-#endif /* !CONFIG_THUMB2_KERNEL */
+	patch_text(addr, brkp);
+}
 
 /*
  * The actual disarming is done here on each CPU and synchronized using
@@ -166,25 +143,10 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 int __kprobes __arch_disarm_kprobe(void *p)
 {
 	struct kprobe *kp = p;
-#ifdef CONFIG_THUMB2_KERNEL
-	u16 *addr = (u16 *)((uintptr_t)kp->addr & ~1);
-	kprobe_opcode_t insn = kp->opcode;
-	unsigned int len;
+	void *addr = (void *)((uintptr_t)kp->addr & ~1);
 
-	if (is_wide_instruction(insn)) {
-		((u16 *)addr)[0] = insn>>16;
-		((u16 *)addr)[1] = insn;
-		len = 2*sizeof(u16);
-	} else {
-		((u16 *)addr)[0] = insn;
-		len = sizeof(u16);
-	}
-	flush_insns(addr, len);
+	__patch_text(addr, kp->opcode);
 
-#else /* !CONFIG_THUMB2_KERNEL */
-	*kp->addr = kp->opcode;
-	flush_insns(kp->addr, sizeof(kp->addr[0]));
-#endif
 	return 0;
 }
 
diff --git a/arch/arm/kernel/patch.c b/arch/arm/kernel/patch.c
new file mode 100644
index 000000000000..07314af47733
--- /dev/null
+++ b/arch/arm/kernel/patch.c
@@ -0,0 +1,75 @@
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/stop_machine.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/opcodes.h>
+
+#include "patch.h"
+
+struct patch {
+	void *addr;
+	unsigned int insn;
+};
+
+void __kprobes __patch_text(void *addr, unsigned int insn)
+{
+	bool thumb2 = IS_ENABLED(CONFIG_THUMB2_KERNEL);
+	int size;
+
+	if (thumb2 && __opcode_is_thumb16(insn)) {
+		*(u16 *)addr = __opcode_to_mem_thumb16(insn);
+		size = sizeof(u16);
+	} else if (thumb2 && ((uintptr_t)addr & 2)) {
+		u16 first = __opcode_thumb32_first(insn);
+		u16 second = __opcode_thumb32_second(insn);
+		u16 *addrh = addr;
+
+		addrh[0] = __opcode_to_mem_thumb16(first);
+		addrh[1] = __opcode_to_mem_thumb16(second);
+
+		size = sizeof(u32);
+	} else {
+		if (thumb2)
+			insn = __opcode_to_mem_thumb32(insn);
+		else
+			insn = __opcode_to_mem_arm(insn);
+
+		*(u32 *)addr = insn;
+		size = sizeof(u32);
+	}
+
+	flush_icache_range((uintptr_t)(addr),
+			   (uintptr_t)(addr) + size);
+}
+
+static int __kprobes patch_text_stop_machine(void *data)
+{
+	struct patch *patch = data;
+
+	__patch_text(patch->addr, patch->insn);
+
+	return 0;
+}
+
+void __kprobes patch_text(void *addr, unsigned int insn)
+{
+	struct patch patch = {
+		.addr = addr,
+		.insn = insn,
+	};
+
+	if (cache_ops_need_broadcast()) {
+		stop_machine(patch_text_stop_machine, &patch, cpu_online_mask);
+	} else {
+		bool straddles_word = IS_ENABLED(CONFIG_THUMB2_KERNEL)
+				      && __opcode_is_thumb32(insn)
+				      && ((uintptr_t)addr & 2);
+
+		if (straddles_word)
+			stop_machine(patch_text_stop_machine, &patch, NULL);
+		else
+			__patch_text(addr, insn);
+	}
+}
diff --git a/arch/arm/kernel/patch.h b/arch/arm/kernel/patch.h
new file mode 100644
index 000000000000..b4731f2dac38
--- /dev/null
+++ b/arch/arm/kernel/patch.h
@@ -0,0 +1,7 @@
+#ifndef _ARM_KERNEL_PATCH_H
+#define _ARM_KERNEL_PATCH_H
+
+void patch_text(void *addr, unsigned int insn);
+void __patch_text(void *addr, unsigned int insn);
+
+#endif
-- 
cgit v1.2.3


From e88443cdfc61af5cd22d6aeb245ee94833c473bc Mon Sep 17 00:00:00 2001
From: Mathias Krause <minipli@googlemail.com>
Date: Mon, 5 Mar 2012 15:05:34 -0800
Subject: ARM: exec: remove redundant set_fs(USER_DS)

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/processor.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8d613c..d7038fa22343 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -55,7 +55,6 @@ struct thread_struct {
 #define start_thread(regs,pc,sp)					\
 ({									\
 	unsigned long *stack = (unsigned long *)sp;			\
-	set_fs(USER_DS);						\
 	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	if (current->personality & ADDR_LIMIT_32BIT)			\
 		regs->ARM_cpsr = USR_MODE;				\
-- 
cgit v1.2.3


From 101d9b0dedbc9e560737d3357104bf09db48eb3e Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt.fleming@intel.com>
Date: Mon, 5 Mar 2012 15:05:34 -0800
Subject: ARM: use set_current_blocked() and block_sigmask()

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check for shared signals we're about to block.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate code
across architectures.  In the past some architectures got this code wrong,
so using this helper function should stop that from happening again.

Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Dave Martin <dave.martin@linaro.org>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/signal.c | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 0340224cf73c..d13e61ac18da 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -66,12 +66,13 @@ const unsigned long syscall_restart_code[2] = {
  */
 asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
+	sigset_t blocked;
+
 	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -281,10 +282,7 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
 	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
 	if (err == 0) {
 		sigdelsetmask(&set, ~_BLOCKABLE);
-		spin_lock_irq(&current->sighand->siglock);
-		current->blocked = set;
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
+		set_current_blocked(&set);
 	}
 
 	__get_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
@@ -637,13 +635,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	/*
 	 * Block the signal if we were successful.
 	 */
-	spin_lock_irq(&tsk->sighand->siglock);
-	sigorsets(&tsk->blocked, &tsk->blocked,
-		  &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&tsk->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&tsk->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 9b5a146a43db3733c731d47022f4f5259e6b31e6 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nicolas.pitre@linaro.org>
Date: Wed, 22 Feb 2012 21:58:03 +0100
Subject: ARM: 7338/1: add support for early console output via semihosting

This is a very simple method for code running in an emulator, or under
the supervision of a debugger, to use I/O facilities on the controlling
host.

Tested with OpenOCD, and ARM's Fast Models.

Details on semihosting can be found in chapter 8 of
DUI0203I_rvct_developer_guide.pdf from ARM Ltd.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig.debug  | 16 ++++++++++++++++
 arch/arm/kernel/debug.S | 25 ++++++++++++++++++++++++-
 arch/arm/kernel/head.S  |  8 ++++----
 3 files changed, 44 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d7ff73..755d9fbe3238 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -100,6 +100,22 @@ choice
 		  Note that the system will appear to hang during boot if there
 		  is nothing connected to read from the DCC.
 
+	config DEBUG_SEMIHOSTING
+		bool "Kernel low-level debug output via semihosting I"
+		help
+		  Semihosting enables code running on an ARM target to use
+		  the I/O facilities on a host debugger/emulator through a
+		  simple SVC calls. The host debugger or emulator must have
+		  semihosting enabled for the special svc call to be trapped
+		  otherwise the kernel will crash.
+
+		  This is known to work with OpenOCD, as wellas
+		  ARM's Fast Models, or any other controlling environment
+		  that implements semihosting.
+
+		  For more details about semihosting, please see
+		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
+
 	config AT91_DEBUG_LL_DBGU0
 		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 		depends on HAVE_AT91_DBGU0
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 204e2160cfcc..e5a765c5f06a 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -100,7 +100,7 @@
 
 #endif	/* CONFIG_CPU_V6 */
 
-#else
+#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
 #include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
@@ -155,6 +155,8 @@ hexbuf:		.space 16
 
 		.ltorg
 
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
 ENTRY(printascii)
 		addruart_current r3, r1, r2
 		b	2f
@@ -177,3 +179,24 @@ ENTRY(printch)
 		mov	r0, #0
 		b	1b
 ENDPROC(printch)
+
+#else
+
+ENTRY(printascii)
+		mov	r1, r0
+		mov	r0, #0x04		@ SYS_WRITE0
+	ARM(	svc	#0x123456	)
+	THUMB(	svc	#0xab		)
+		mov	pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+		adr	r1, hexbuf
+		strb	r0, [r1]
+		mov	r0, #0x03		@ SYS_WRITEC
+	ARM(	svc	#0x123456	)
+	THUMB(	svc	#0xab		)
+		mov	pc, lr
+ENDPROC(printch)
+
+#endif
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index a2e9694a68ee..3bf0c7f8b043 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -265,7 +265,7 @@ __create_page_tables:
 	str	r6, [r3]
 
 #ifdef CONFIG_DEBUG_LL
-#ifndef CONFIG_DEBUG_ICEDCC
+#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output
@@ -297,10 +297,10 @@ __create_page_tables:
 	cmp	r0, r6
 	blo	1b
 
-#else /* CONFIG_DEBUG_ICEDCC */
-	/* we don't need any serial debugging mappings for ICEDCC */
+#else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
+	/* we don't need any serial debugging mappings */
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
-#endif /* !CONFIG_DEBUG_ICEDCC */
+#endif
 
 #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
 	/*
-- 
cgit v1.2.3


From 09f05d8529ff4aa92311c1a55ce35ac98cb59b8c Mon Sep 17 00:00:00 2001
From: Rabin Vincent <rabin@rab.in>
Date: Sat, 18 Feb 2012 17:52:41 +0100
Subject: ARM: 7334/1: add jump label support

Add the arch-specific code to support jump labels for ARM and Thumb-2.

This code will only be activated on compilers that are capable of
building it.  It has been tested with GCC 4.6 patched with the patch
from GCC bug 48637.

Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                  |  1 +
 arch/arm/include/asm/jump_label.h | 41 +++++++++++++++++++++++++++++++++++++++
 arch/arm/kernel/Makefile          |  1 +
 arch/arm/kernel/insn.h            | 10 ++++++++++
 arch/arm/kernel/jump_label.c      | 39 +++++++++++++++++++++++++++++++++++++
 5 files changed, 92 insertions(+)
 create mode 100644 arch/arm/include/asm/jump_label.h
 create mode 100644 arch/arm/kernel/jump_label.c

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6b5f84887ce5..ee6c7154c9a1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,6 +9,7 @@ config ARM
 	select SYS_SUPPORTS_APM_EMULATION
 	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h
new file mode 100644
index 000000000000..5c5ca2ea62b0
--- /dev/null
+++ b/arch/arm/include/asm/jump_label.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_ARM_JUMP_LABEL_H
+#define _ASM_ARM_JUMP_LABEL_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+#define JUMP_LABEL_NOP_SIZE 4
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define JUMP_LABEL_NOP	"nop.w"
+#else
+#define JUMP_LABEL_NOP	"nop"
+#endif
+
+static __always_inline bool arch_static_branch(struct jump_label_key *key)
+{
+	asm goto("1:\n\t"
+		 JUMP_LABEL_NOP "\n\t"
+		 ".pushsection __jump_table,  \"aw\"\n\t"
+		 ".word 1b, %l[l_yes], %c0\n\t"
+		 ".popsection\n\t"
+		 : :  "i" (key) :  : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+#endif /* __KERNEL__ */
+
+typedef u32 jump_label_t;
+
+struct jump_entry {
+	jump_label_t code;
+	jump_label_t target;
+	jump_label_t key;
+};
+
+#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 8c63ee8d3c48..1b7d9a390971 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o
+obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-common.o patch.o
 ifdef CONFIG_THUMB2_KERNEL
diff --git a/arch/arm/kernel/insn.h b/arch/arm/kernel/insn.h
index 994d60fd3ff5..e96065da4dae 100644
--- a/arch/arm/kernel/insn.h
+++ b/arch/arm/kernel/insn.h
@@ -1,6 +1,16 @@
 #ifndef __ASM_ARM_INSN_H
 #define __ASM_ARM_INSN_H
 
+static inline unsigned long
+arm_gen_nop(void)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+	return 0xf3af8000; /* nop.w */
+#else
+	return 0xe1a00000; /* mov r0, r0 */
+#endif
+}
+
 unsigned long
 __arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
 
diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c
new file mode 100644
index 000000000000..4ce4f789446d
--- /dev/null
+++ b/arch/arm/kernel/jump_label.c
@@ -0,0 +1,39 @@
+#include <linux/kernel.h>
+#include <linux/jump_label.h>
+
+#include "insn.h"
+#include "patch.h"
+
+#ifdef HAVE_JUMP_LABEL
+
+static void __arch_jump_label_transform(struct jump_entry *entry,
+					enum jump_label_type type,
+					bool is_static)
+{
+	void *addr = (void *)entry->code;
+	unsigned int insn;
+
+	if (type == JUMP_LABEL_ENABLE)
+		insn = arm_gen_branch(entry->code, entry->target);
+	else
+		insn = arm_gen_nop();
+
+	if (is_static)
+		__patch_text(addr, insn);
+	else
+		patch_text(addr, insn);
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+			       enum jump_label_type type)
+{
+	__arch_jump_label_transform(entry, type, false);
+}
+
+void arch_jump_label_transform_static(struct jump_entry *entry,
+				      enum jump_label_type type)
+{
+	__arch_jump_label_transform(entry, type, true);
+}
+
+#endif
-- 
cgit v1.2.3


From ddecdfcea0ae891f782ae853771c867ab51024c2 Mon Sep 17 00:00:00 2001
From: Mircea Gherzan <mgherzan@gmail.com>
Date: Fri, 16 Mar 2012 13:37:12 +0100
Subject: ARM: 7259/3: net: JIT compiler for packet filters

Based of Matt Evans's PPC64 implementation.

The compiler generates ARM instructions but interworking is
supported for Thumb2 kernels.

Supports both little and big endian. Unaligned loads are emitted
for ARMv6+. Not all the BPF opcodes that deal with ancillary data
are supported. The scratch memory of the filter lives on the stack.
Hardware integer division is used if it is available.

Enabled in the same way as for x86-64 and PPC64:

	echo 1 > /proc/sys/net/core/bpf_jit_enable

A value greater than 1 enables opcode output.

Signed-off-by: Mircea Gherzan <mgherzan@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig          |   1 +
 arch/arm/Makefile         |   1 +
 arch/arm/net/Makefile     |   3 +
 arch/arm/net/bpf_jit_32.c | 915 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/net/bpf_jit_32.h | 190 ++++++++++
 5 files changed, 1110 insertions(+)
 create mode 100644 arch/arm/net/Makefile
 create mode 100644 arch/arm/net/bpf_jit_32.c
 create mode 100644 arch/arm/net/bpf_jit_32.h

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ee6c7154c9a1..746ab6d6a205 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,6 +34,7 @@ config ARM
 	select GENERIC_IRQ_SHOW
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select GENERIC_PCI_IOMAP
+	select HAVE_BPF_JIT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 40319d91bb7f..93d63be8fa59 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -253,6 +253,7 @@ core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
+core-y				+= arch/arm/net/
 core-y				+= $(machdirs) $(platdirs)
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
diff --git a/arch/arm/net/Makefile b/arch/arm/net/Makefile
new file mode 100644
index 000000000000..c2c10841b6be
--- /dev/null
+++ b/arch/arm/net/Makefile
@@ -0,0 +1,3 @@
+# ARM-specific networking code
+
+obj-$(CONFIG_BPF_JIT) += bpf_jit_32.o
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
new file mode 100644
index 000000000000..62135849f48b
--- /dev/null
+++ b/arch/arm/net/bpf_jit_32.c
@@ -0,0 +1,915 @@
+/*
+ * Just-In-Time compiler for BPF filters on 32bit ARM
+ *
+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/filter.h>
+#include <linux/moduleloader.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <asm/cacheflush.h>
+#include <asm/hwcap.h>
+
+#include "bpf_jit_32.h"
+
+/*
+ * ABI:
+ *
+ * r0	scratch register
+ * r4	BPF register A
+ * r5	BPF register X
+ * r6	pointer to the skb
+ * r7	skb->data
+ * r8	skb_headlen(skb)
+ */
+
+#define r_scratch	ARM_R0
+/* r1-r3 are (also) used for the unaligned loads on the non-ARMv7 slowpath */
+#define r_off		ARM_R1
+#define r_A		ARM_R4
+#define r_X		ARM_R5
+#define r_skb		ARM_R6
+#define r_skb_data	ARM_R7
+#define r_skb_hl	ARM_R8
+
+#define SCRATCH_SP_OFFSET	0
+#define SCRATCH_OFF(k)		(SCRATCH_SP_OFFSET + (k))
+
+#define SEEN_MEM		((1 << BPF_MEMWORDS) - 1)
+#define SEEN_MEM_WORD(k)	(1 << (k))
+#define SEEN_X			(1 << BPF_MEMWORDS)
+#define SEEN_CALL		(1 << (BPF_MEMWORDS + 1))
+#define SEEN_SKB		(1 << (BPF_MEMWORDS + 2))
+#define SEEN_DATA		(1 << (BPF_MEMWORDS + 3))
+
+#define FLAG_NEED_X_RESET	(1 << 0)
+
+struct jit_ctx {
+	const struct sk_filter *skf;
+	unsigned idx;
+	unsigned prologue_bytes;
+	int ret0_fp_idx;
+	u32 seen;
+	u32 flags;
+	u32 *offsets;
+	u32 *target;
+#if __LINUX_ARM_ARCH__ < 7
+	u16 epilogue_bytes;
+	u16 imm_count;
+	u32 *imms;
+#endif
+};
+
+int bpf_jit_enable __read_mostly;
+
+static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
+{
+	u8 ret;
+	int err;
+
+	err = skb_copy_bits(skb, offset, &ret, 1);
+
+	return (u64)err << 32 | ret;
+}
+
+static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
+{
+	u16 ret;
+	int err;
+
+	err = skb_copy_bits(skb, offset, &ret, 2);
+
+	return (u64)err << 32 | ntohs(ret);
+}
+
+static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
+{
+	u32 ret;
+	int err;
+
+	err = skb_copy_bits(skb, offset, &ret, 4);
+
+	return (u64)err << 32 | ntohl(ret);
+}
+
+/*
+ * Wrapper that handles both OABI and EABI and assures Thumb2 interworking
+ * (where the assembly routines like __aeabi_uidiv could cause problems).
+ */
+static u32 jit_udiv(u32 dividend, u32 divisor)
+{
+	return dividend / divisor;
+}
+
+static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
+{
+	if (ctx->target != NULL)
+		ctx->target[ctx->idx] = inst | (cond << 28);
+
+	ctx->idx++;
+}
+
+/*
+ * Emit an instruction that will be executed unconditionally.
+ */
+static inline void emit(u32 inst, struct jit_ctx *ctx)
+{
+	_emit(ARM_COND_AL, inst, ctx);
+}
+
+static u16 saved_regs(struct jit_ctx *ctx)
+{
+	u16 ret = 0;
+
+	if ((ctx->skf->len > 1) ||
+	    (ctx->skf->insns[0].code == BPF_S_RET_A))
+		ret |= 1 << r_A;
+
+#ifdef CONFIG_FRAME_POINTER
+	ret |= (1 << ARM_FP) | (1 << ARM_IP) | (1 << ARM_LR) | (1 << ARM_PC);
+#else
+	if (ctx->seen & SEEN_CALL)
+		ret |= 1 << ARM_LR;
+#endif
+	if (ctx->seen & (SEEN_DATA | SEEN_SKB))
+		ret |= 1 << r_skb;
+	if (ctx->seen & SEEN_DATA)
+		ret |= (1 << r_skb_data) | (1 << r_skb_hl);
+	if (ctx->seen & SEEN_X)
+		ret |= 1 << r_X;
+
+	return ret;
+}
+
+static inline int mem_words_used(struct jit_ctx *ctx)
+{
+	/* yes, we do waste some stack space IF there are "holes" in the set" */
+	return fls(ctx->seen & SEEN_MEM);
+}
+
+static inline bool is_load_to_a(u16 inst)
+{
+	switch (inst) {
+	case BPF_S_LD_W_LEN:
+	case BPF_S_LD_W_ABS:
+	case BPF_S_LD_H_ABS:
+	case BPF_S_LD_B_ABS:
+	case BPF_S_ANC_CPU:
+	case BPF_S_ANC_IFINDEX:
+	case BPF_S_ANC_MARK:
+	case BPF_S_ANC_PROTOCOL:
+	case BPF_S_ANC_RXHASH:
+	case BPF_S_ANC_QUEUE:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void build_prologue(struct jit_ctx *ctx)
+{
+	u16 reg_set = saved_regs(ctx);
+	u16 first_inst = ctx->skf->insns[0].code;
+	u16 off;
+
+#ifdef CONFIG_FRAME_POINTER
+	emit(ARM_MOV_R(ARM_IP, ARM_SP), ctx);
+	emit(ARM_PUSH(reg_set), ctx);
+	emit(ARM_SUB_I(ARM_FP, ARM_IP, 4), ctx);
+#else
+	if (reg_set)
+		emit(ARM_PUSH(reg_set), ctx);
+#endif
+
+	if (ctx->seen & (SEEN_DATA | SEEN_SKB))
+		emit(ARM_MOV_R(r_skb, ARM_R0), ctx);
+
+	if (ctx->seen & SEEN_DATA) {
+		off = offsetof(struct sk_buff, data);
+		emit(ARM_LDR_I(r_skb_data, r_skb, off), ctx);
+		/* headlen = len - data_len */
+		off = offsetof(struct sk_buff, len);
+		emit(ARM_LDR_I(r_skb_hl, r_skb, off), ctx);
+		off = offsetof(struct sk_buff, data_len);
+		emit(ARM_LDR_I(r_scratch, r_skb, off), ctx);
+		emit(ARM_SUB_R(r_skb_hl, r_skb_hl, r_scratch), ctx);
+	}
+
+	if (ctx->flags & FLAG_NEED_X_RESET)
+		emit(ARM_MOV_I(r_X, 0), ctx);
+
+	/* do not leak kernel data to userspace */
+	if ((first_inst != BPF_S_RET_K) && !(is_load_to_a(first_inst)))
+		emit(ARM_MOV_I(r_A, 0), ctx);
+
+	/* stack space for the BPF_MEM words */
+	if (ctx->seen & SEEN_MEM)
+		emit(ARM_SUB_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx);
+}
+
+static void build_epilogue(struct jit_ctx *ctx)
+{
+	u16 reg_set = saved_regs(ctx);
+
+	if (ctx->seen & SEEN_MEM)
+		emit(ARM_ADD_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx);
+
+	reg_set &= ~(1 << ARM_LR);
+
+#ifdef CONFIG_FRAME_POINTER
+	/* the first instruction of the prologue was: mov ip, sp */
+	reg_set &= ~(1 << ARM_IP);
+	reg_set |= (1 << ARM_SP);
+	emit(ARM_LDM(ARM_SP, reg_set), ctx);
+#else
+	if (reg_set) {
+		if (ctx->seen & SEEN_CALL)
+			reg_set |= 1 << ARM_PC;
+		emit(ARM_POP(reg_set), ctx);
+	}
+
+	if (!(ctx->seen & SEEN_CALL))
+		emit(ARM_BX(ARM_LR), ctx);
+#endif
+}
+
+static int16_t imm8m(u32 x)
+{
+	u32 rot;
+
+	for (rot = 0; rot < 16; rot++)
+		if ((x & ~ror32(0xff, 2 * rot)) == 0)
+			return rol32(x, 2 * rot) | (rot << 8);
+
+	return -1;
+}
+
+#if __LINUX_ARM_ARCH__ < 7
+
+static u16 imm_offset(u32 k, struct jit_ctx *ctx)
+{
+	unsigned i = 0, offset;
+	u16 imm;
+
+	/* on the "fake" run we just count them (duplicates included) */
+	if (ctx->target == NULL) {
+		ctx->imm_count++;
+		return 0;
+	}
+
+	while ((i < ctx->imm_count) && ctx->imms[i]) {
+		if (ctx->imms[i] == k)
+			break;
+		i++;
+	}
+
+	if (ctx->imms[i] == 0)
+		ctx->imms[i] = k;
+
+	/* constants go just after the epilogue */
+	offset =  ctx->offsets[ctx->skf->len];
+	offset += ctx->prologue_bytes;
+	offset += ctx->epilogue_bytes;
+	offset += i * 4;
+
+	ctx->target[offset / 4] = k;
+
+	/* PC in ARM mode == address of the instruction + 8 */
+	imm = offset - (8 + ctx->idx * 4);
+
+	return imm;
+}
+
+#endif /* __LINUX_ARM_ARCH__ */
+
+/*
+ * Move an immediate that's not an imm8m to a core register.
+ */
+static inline void emit_mov_i_no8m(int rd, u32 val, struct jit_ctx *ctx)
+{
+#if __LINUX_ARM_ARCH__ < 7
+	emit(ARM_LDR_I(rd, ARM_PC, imm_offset(val, ctx)), ctx);
+#else
+	emit(ARM_MOVW(rd, val & 0xffff), ctx);
+	if (val > 0xffff)
+		emit(ARM_MOVT(rd, val >> 16), ctx);
+#endif
+}
+
+static inline void emit_mov_i(int rd, u32 val, struct jit_ctx *ctx)
+{
+	int imm12 = imm8m(val);
+
+	if (imm12 >= 0)
+		emit(ARM_MOV_I(rd, imm12), ctx);
+	else
+		emit_mov_i_no8m(rd, val, ctx);
+}
+
+#if __LINUX_ARM_ARCH__ < 6
+
+static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
+{
+	_emit(cond, ARM_LDRB_I(ARM_R3, r_addr, 1), ctx);
+	_emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx);
+	_emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 3), ctx);
+	_emit(cond, ARM_LSL_I(ARM_R3, ARM_R3, 16), ctx);
+	_emit(cond, ARM_LDRB_I(ARM_R0, r_addr, 2), ctx);
+	_emit(cond, ARM_ORR_S(ARM_R3, ARM_R3, ARM_R1, SRTYPE_LSL, 24), ctx);
+	_emit(cond, ARM_ORR_R(ARM_R3, ARM_R3, ARM_R2), ctx);
+	_emit(cond, ARM_ORR_S(r_res, ARM_R3, ARM_R0, SRTYPE_LSL, 8), ctx);
+}
+
+static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
+{
+	_emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx);
+	_emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 1), ctx);
+	_emit(cond, ARM_ORR_S(r_res, ARM_R2, ARM_R1, SRTYPE_LSL, 8), ctx);
+}
+
+static inline void emit_swap16(u8 r_dst, u8 r_src, struct jit_ctx *ctx)
+{
+	emit(ARM_LSL_R(ARM_R1, r_src, 8), ctx);
+	emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSL, 8), ctx);
+	emit(ARM_LSL_I(r_dst, r_dst, 8), ctx);
+	emit(ARM_LSL_R(r_dst, r_dst, 8), ctx);
+}
+
+#else  /* ARMv6+ */
+
+static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
+{
+	_emit(cond, ARM_LDR_I(r_res, r_addr, 0), ctx);
+#ifdef __LITTLE_ENDIAN
+	_emit(cond, ARM_REV(r_res, r_res), ctx);
+#endif
+}
+
+static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
+{
+	_emit(cond, ARM_LDRH_I(r_res, r_addr, 0), ctx);
+#ifdef __LITTLE_ENDIAN
+	_emit(cond, ARM_REV16(r_res, r_res), ctx);
+#endif
+}
+
+static inline void emit_swap16(u8 r_dst __maybe_unused,
+			       u8 r_src __maybe_unused,
+			       struct jit_ctx *ctx __maybe_unused)
+{
+#ifdef __LITTLE_ENDIAN
+	emit(ARM_REV16(r_dst, r_src), ctx);
+#endif
+}
+
+#endif /* __LINUX_ARM_ARCH__ < 6 */
+
+
+/* Compute the immediate value for a PC-relative branch. */
+static inline u32 b_imm(unsigned tgt, struct jit_ctx *ctx)
+{
+	u32 imm;
+
+	if (ctx->target == NULL)
+		return 0;
+	/*
+	 * BPF allows only forward jumps and the offset of the target is
+	 * still the one computed during the first pass.
+	 */
+	imm  = ctx->offsets[tgt] + ctx->prologue_bytes - (ctx->idx * 4 + 8);
+
+	return imm >> 2;
+}
+
+#define OP_IMM3(op, r1, r2, imm_val, ctx)				\
+	do {								\
+		imm12 = imm8m(imm_val);					\
+		if (imm12 < 0) {					\
+			emit_mov_i_no8m(r_scratch, imm_val, ctx);	\
+			emit(op ## _R((r1), (r2), r_scratch), ctx);	\
+		} else {						\
+			emit(op ## _I((r1), (r2), imm12), ctx);		\
+		}							\
+	} while (0)
+
+static inline void emit_err_ret(u8 cond, struct jit_ctx *ctx)
+{
+	if (ctx->ret0_fp_idx >= 0) {
+		_emit(cond, ARM_B(b_imm(ctx->ret0_fp_idx, ctx)), ctx);
+		/* NOP to keep the size constant between passes */
+		emit(ARM_MOV_R(ARM_R0, ARM_R0), ctx);
+	} else {
+		_emit(cond, ARM_MOV_I(ARM_R0, 0), ctx);
+		_emit(cond, ARM_B(b_imm(ctx->skf->len, ctx)), ctx);
+	}
+}
+
+static inline void emit_blx_r(u8 tgt_reg, struct jit_ctx *ctx)
+{
+#if __LINUX_ARM_ARCH__ < 5
+	emit(ARM_MOV_R(ARM_LR, ARM_PC), ctx);
+
+	if (elf_hwcap & HWCAP_THUMB)
+		emit(ARM_BX(tgt_reg), ctx);
+	else
+		emit(ARM_MOV_R(ARM_PC, tgt_reg), ctx);
+#else
+	emit(ARM_BLX_R(tgt_reg), ctx);
+#endif
+}
+
+static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
+{
+#if __LINUX_ARM_ARCH__ == 7
+	if (elf_hwcap & HWCAP_IDIVA) {
+		emit(ARM_UDIV(rd, rm, rn), ctx);
+		return;
+	}
+#endif
+	if (rm != ARM_R0)
+		emit(ARM_MOV_R(ARM_R0, rm), ctx);
+	if (rn != ARM_R1)
+		emit(ARM_MOV_R(ARM_R1, rn), ctx);
+
+	ctx->seen |= SEEN_CALL;
+	emit_mov_i(ARM_R3, (u32)jit_udiv, ctx);
+	emit_blx_r(ARM_R3, ctx);
+
+	if (rd != ARM_R0)
+		emit(ARM_MOV_R(rd, ARM_R0), ctx);
+}
+
+static inline void update_on_xread(struct jit_ctx *ctx)
+{
+	if (!(ctx->seen & SEEN_X))
+		ctx->flags |= FLAG_NEED_X_RESET;
+
+	ctx->seen |= SEEN_X;
+}
+
+static int build_body(struct jit_ctx *ctx)
+{
+	void *load_func[] = {jit_get_skb_b, jit_get_skb_h, jit_get_skb_w};
+	const struct sk_filter *prog = ctx->skf;
+	const struct sock_filter *inst;
+	unsigned i, load_order, off, condt;
+	int imm12;
+	u32 k;
+
+	for (i = 0; i < prog->len; i++) {
+		inst = &(prog->insns[i]);
+		/* K as an immediate value operand */
+		k = inst->k;
+
+		/* compute offsets only in the fake pass */
+		if (ctx->target == NULL)
+			ctx->offsets[i] = ctx->idx * 4;
+
+		switch (inst->code) {
+		case BPF_S_LD_IMM:
+			emit_mov_i(r_A, k, ctx);
+			break;
+		case BPF_S_LD_W_LEN:
+			ctx->seen |= SEEN_SKB;
+			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
+			emit(ARM_LDR_I(r_A, r_skb,
+				       offsetof(struct sk_buff, len)), ctx);
+			break;
+		case BPF_S_LD_MEM:
+			/* A = scratch[k] */
+			ctx->seen |= SEEN_MEM_WORD(k);
+			emit(ARM_LDR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx);
+			break;
+		case BPF_S_LD_W_ABS:
+			load_order = 2;
+			goto load;
+		case BPF_S_LD_H_ABS:
+			load_order = 1;
+			goto load;
+		case BPF_S_LD_B_ABS:
+			load_order = 0;
+load:
+			/* the interpreter will deal with the negative K */
+			if ((int)k < 0)
+				return -ENOTSUPP;
+			emit_mov_i(r_off, k, ctx);
+load_common:
+			ctx->seen |= SEEN_DATA | SEEN_CALL;
+
+			if (load_order > 0) {
+				emit(ARM_SUB_I(r_scratch, r_skb_hl,
+					       1 << load_order), ctx);
+				emit(ARM_CMP_R(r_scratch, r_off), ctx);
+				condt = ARM_COND_HS;
+			} else {
+				emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
+				condt = ARM_COND_HI;
+			}
+
+			_emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data),
+			      ctx);
+
+			if (load_order == 0)
+				_emit(condt, ARM_LDRB_I(r_A, r_scratch, 0),
+				      ctx);
+			else if (load_order == 1)
+				emit_load_be16(condt, r_A, r_scratch, ctx);
+			else if (load_order == 2)
+				emit_load_be32(condt, r_A, r_scratch, ctx);
+
+			_emit(condt, ARM_B(b_imm(i + 1, ctx)), ctx);
+
+			/* the slowpath */
+			emit_mov_i(ARM_R3, (u32)load_func[load_order], ctx);
+			emit(ARM_MOV_R(ARM_R0, r_skb), ctx);
+			/* the offset is already in R1 */
+			emit_blx_r(ARM_R3, ctx);
+			/* check the result of skb_copy_bits */
+			emit(ARM_CMP_I(ARM_R1, 0), ctx);
+			emit_err_ret(ARM_COND_NE, ctx);
+			emit(ARM_MOV_R(r_A, ARM_R0), ctx);
+			break;
+		case BPF_S_LD_W_IND:
+			load_order = 2;
+			goto load_ind;
+		case BPF_S_LD_H_IND:
+			load_order = 1;
+			goto load_ind;
+		case BPF_S_LD_B_IND:
+			load_order = 0;
+load_ind:
+			OP_IMM3(ARM_ADD, r_off, r_X, k, ctx);
+			goto load_common;
+		case BPF_S_LDX_IMM:
+			ctx->seen |= SEEN_X;
+			emit_mov_i(r_X, k, ctx);
+			break;
+		case BPF_S_LDX_W_LEN:
+			ctx->seen |= SEEN_X | SEEN_SKB;
+			emit(ARM_LDR_I(r_X, r_skb,
+				       offsetof(struct sk_buff, len)), ctx);
+			break;
+		case BPF_S_LDX_MEM:
+			ctx->seen |= SEEN_X | SEEN_MEM_WORD(k);
+			emit(ARM_LDR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx);
+			break;
+		case BPF_S_LDX_B_MSH:
+			/* x = ((*(frame + k)) & 0xf) << 2; */
+			ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
+			/* the interpreter should deal with the negative K */
+			if (k < 0)
+				return -1;
+			/* offset in r1: we might have to take the slow path */
+			emit_mov_i(r_off, k, ctx);
+			emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
+
+			/* load in r0: common with the slowpath */
+			_emit(ARM_COND_HI, ARM_LDRB_R(ARM_R0, r_skb_data,
+						      ARM_R1), ctx);
+			/*
+			 * emit_mov_i() might generate one or two instructions,
+			 * the same holds for emit_blx_r()
+			 */
+			_emit(ARM_COND_HI, ARM_B(b_imm(i + 1, ctx) - 2), ctx);
+
+			emit(ARM_MOV_R(ARM_R0, r_skb), ctx);
+			/* r_off is r1 */
+			emit_mov_i(ARM_R3, (u32)jit_get_skb_b, ctx);
+			emit_blx_r(ARM_R3, ctx);
+			/* check the return value of skb_copy_bits */
+			emit(ARM_CMP_I(ARM_R1, 0), ctx);
+			emit_err_ret(ARM_COND_NE, ctx);
+
+			emit(ARM_AND_I(r_X, ARM_R0, 0x00f), ctx);
+			emit(ARM_LSL_I(r_X, r_X, 2), ctx);
+			break;
+		case BPF_S_ST:
+			ctx->seen |= SEEN_MEM_WORD(k);
+			emit(ARM_STR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx);
+			break;
+		case BPF_S_STX:
+			update_on_xread(ctx);
+			ctx->seen |= SEEN_MEM_WORD(k);
+			emit(ARM_STR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx);
+			break;
+		case BPF_S_ALU_ADD_K:
+			/* A += K */
+			OP_IMM3(ARM_ADD, r_A, r_A, k, ctx);
+			break;
+		case BPF_S_ALU_ADD_X:
+			update_on_xread(ctx);
+			emit(ARM_ADD_R(r_A, r_A, r_X), ctx);
+			break;
+		case BPF_S_ALU_SUB_K:
+			/* A -= K */
+			OP_IMM3(ARM_SUB, r_A, r_A, k, ctx);
+			break;
+		case BPF_S_ALU_SUB_X:
+			update_on_xread(ctx);
+			emit(ARM_SUB_R(r_A, r_A, r_X), ctx);
+			break;
+		case BPF_S_ALU_MUL_K:
+			/* A *= K */
+			emit_mov_i(r_scratch, k, ctx);
+			emit(ARM_MUL(r_A, r_A, r_scratch), ctx);
+			break;
+		case BPF_S_ALU_MUL_X:
+			update_on_xread(ctx);
+			emit(ARM_MUL(r_A, r_A, r_X), ctx);
+			break;
+		case BPF_S_ALU_DIV_K:
+			/* current k == reciprocal_value(userspace k) */
+			emit_mov_i(r_scratch, k, ctx);
+			/* A = top 32 bits of the product */
+			emit(ARM_UMULL(r_scratch, r_A, r_A, r_scratch), ctx);
+			break;
+		case BPF_S_ALU_DIV_X:
+			update_on_xread(ctx);
+			emit(ARM_CMP_I(r_X, 0), ctx);
+			emit_err_ret(ARM_COND_EQ, ctx);
+			emit_udiv(r_A, r_A, r_X, ctx);
+			break;
+		case BPF_S_ALU_OR_K:
+			/* A |= K */
+			OP_IMM3(ARM_ORR, r_A, r_A, k, ctx);
+			break;
+		case BPF_S_ALU_OR_X:
+			update_on_xread(ctx);
+			emit(ARM_ORR_R(r_A, r_A, r_X), ctx);
+			break;
+		case BPF_S_ALU_AND_K:
+			/* A &= K */
+			OP_IMM3(ARM_AND, r_A, r_A, k, ctx);
+			break;
+		case BPF_S_ALU_AND_X:
+			update_on_xread(ctx);
+			emit(ARM_AND_R(r_A, r_A, r_X), ctx);
+			break;
+		case BPF_S_ALU_LSH_K:
+			if (unlikely(k > 31))
+				return -1;
+			emit(ARM_LSL_I(r_A, r_A, k), ctx);
+			break;
+		case BPF_S_ALU_LSH_X:
+			update_on_xread(ctx);
+			emit(ARM_LSL_R(r_A, r_A, r_X), ctx);
+			break;
+		case BPF_S_ALU_RSH_K:
+			if (unlikely(k > 31))
+				return -1;
+			emit(ARM_LSR_I(r_A, r_A, k), ctx);
+			break;
+		case BPF_S_ALU_RSH_X:
+			update_on_xread(ctx);
+			emit(ARM_LSR_R(r_A, r_A, r_X), ctx);
+			break;
+		case BPF_S_ALU_NEG:
+			/* A = -A */
+			emit(ARM_RSB_I(r_A, r_A, 0), ctx);
+			break;
+		case BPF_S_JMP_JA:
+			/* pc += K */
+			emit(ARM_B(b_imm(i + k + 1, ctx)), ctx);
+			break;
+		case BPF_S_JMP_JEQ_K:
+			/* pc += (A == K) ? pc->jt : pc->jf */
+			condt  = ARM_COND_EQ;
+			goto cmp_imm;
+		case BPF_S_JMP_JGT_K:
+			/* pc += (A > K) ? pc->jt : pc->jf */
+			condt  = ARM_COND_HI;
+			goto cmp_imm;
+		case BPF_S_JMP_JGE_K:
+			/* pc += (A >= K) ? pc->jt : pc->jf */
+			condt  = ARM_COND_HS;
+cmp_imm:
+			imm12 = imm8m(k);
+			if (imm12 < 0) {
+				emit_mov_i_no8m(r_scratch, k, ctx);
+				emit(ARM_CMP_R(r_A, r_scratch), ctx);
+			} else {
+				emit(ARM_CMP_I(r_A, imm12), ctx);
+			}
+cond_jump:
+			if (inst->jt)
+				_emit(condt, ARM_B(b_imm(i + inst->jt + 1,
+						   ctx)), ctx);
+			if (inst->jf)
+				_emit(condt ^ 1, ARM_B(b_imm(i + inst->jf + 1,
+							     ctx)), ctx);
+			break;
+		case BPF_S_JMP_JEQ_X:
+			/* pc += (A == X) ? pc->jt : pc->jf */
+			condt   = ARM_COND_EQ;
+			goto cmp_x;
+		case BPF_S_JMP_JGT_X:
+			/* pc += (A > X) ? pc->jt : pc->jf */
+			condt   = ARM_COND_HI;
+			goto cmp_x;
+		case BPF_S_JMP_JGE_X:
+			/* pc += (A >= X) ? pc->jt : pc->jf */
+			condt   = ARM_COND_CS;
+cmp_x:
+			update_on_xread(ctx);
+			emit(ARM_CMP_R(r_A, r_X), ctx);
+			goto cond_jump;
+		case BPF_S_JMP_JSET_K:
+			/* pc += (A & K) ? pc->jt : pc->jf */
+			condt  = ARM_COND_NE;
+			/* not set iff all zeroes iff Z==1 iff EQ */
+
+			imm12 = imm8m(k);
+			if (imm12 < 0) {
+				emit_mov_i_no8m(r_scratch, k, ctx);
+				emit(ARM_TST_R(r_A, r_scratch), ctx);
+			} else {
+				emit(ARM_TST_I(r_A, imm12), ctx);
+			}
+			goto cond_jump;
+		case BPF_S_JMP_JSET_X:
+			/* pc += (A & X) ? pc->jt : pc->jf */
+			update_on_xread(ctx);
+			condt  = ARM_COND_NE;
+			emit(ARM_TST_R(r_A, r_X), ctx);
+			goto cond_jump;
+		case BPF_S_RET_A:
+			emit(ARM_MOV_R(ARM_R0, r_A), ctx);
+			goto b_epilogue;
+		case BPF_S_RET_K:
+			if ((k == 0) && (ctx->ret0_fp_idx < 0))
+				ctx->ret0_fp_idx = i;
+			emit_mov_i(ARM_R0, k, ctx);
+b_epilogue:
+			if (i != ctx->skf->len - 1)
+				emit(ARM_B(b_imm(prog->len, ctx)), ctx);
+			break;
+		case BPF_S_MISC_TAX:
+			/* X = A */
+			ctx->seen |= SEEN_X;
+			emit(ARM_MOV_R(r_X, r_A), ctx);
+			break;
+		case BPF_S_MISC_TXA:
+			/* A = X */
+			update_on_xread(ctx);
+			emit(ARM_MOV_R(r_A, r_X), ctx);
+			break;
+		case BPF_S_ANC_PROTOCOL:
+			/* A = ntohs(skb->protocol) */
+			ctx->seen |= SEEN_SKB;
+			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
+						  protocol) != 2);
+			off = offsetof(struct sk_buff, protocol);
+			emit(ARM_LDRH_I(r_scratch, r_skb, off), ctx);
+			emit_swap16(r_A, r_scratch, ctx);
+			break;
+		case BPF_S_ANC_CPU:
+			/* r_scratch = current_thread_info() */
+			OP_IMM3(ARM_BIC, r_scratch, ARM_SP, THREAD_SIZE - 1, ctx);
+			/* A = current_thread_info()->cpu */
+			BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4);
+			off = offsetof(struct thread_info, cpu);
+			emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
+			break;
+		case BPF_S_ANC_IFINDEX:
+			/* A = skb->dev->ifindex */
+			ctx->seen |= SEEN_SKB;
+			off = offsetof(struct sk_buff, dev);
+			emit(ARM_LDR_I(r_scratch, r_skb, off), ctx);
+
+			emit(ARM_CMP_I(r_scratch, 0), ctx);
+			emit_err_ret(ARM_COND_EQ, ctx);
+
+			BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
+						  ifindex) != 4);
+			off = offsetof(struct net_device, ifindex);
+			emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
+			break;
+		case BPF_S_ANC_MARK:
+			ctx->seen |= SEEN_SKB;
+			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
+			off = offsetof(struct sk_buff, mark);
+			emit(ARM_LDR_I(r_A, r_skb, off), ctx);
+			break;
+		case BPF_S_ANC_RXHASH:
+			ctx->seen |= SEEN_SKB;
+			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
+			off = offsetof(struct sk_buff, rxhash);
+			emit(ARM_LDR_I(r_A, r_skb, off), ctx);
+			break;
+		case BPF_S_ANC_QUEUE:
+			ctx->seen |= SEEN_SKB;
+			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
+						  queue_mapping) != 2);
+			BUILD_BUG_ON(offsetof(struct sk_buff,
+					      queue_mapping) > 0xff);
+			off = offsetof(struct sk_buff, queue_mapping);
+			emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
+			break;
+		default:
+			return -1;
+		}
+	}
+
+	/* compute offsets only during the first pass */
+	if (ctx->target == NULL)
+		ctx->offsets[i] = ctx->idx * 4;
+
+	return 0;
+}
+
+
+void bpf_jit_compile(struct sk_filter *fp)
+{
+	struct jit_ctx ctx;
+	unsigned tmp_idx;
+	unsigned alloc_size;
+
+	if (!bpf_jit_enable)
+		return;
+
+	memset(&ctx, 0, sizeof(ctx));
+	ctx.skf		= fp;
+	ctx.ret0_fp_idx = -1;
+
+	ctx.offsets = kzalloc(GFP_KERNEL, 4 * (ctx.skf->len + 1));
+	if (ctx.offsets == NULL)
+		return;
+
+	/* fake pass to fill in the ctx->seen */
+	if (unlikely(build_body(&ctx)))
+		goto out;
+
+	tmp_idx = ctx.idx;
+	build_prologue(&ctx);
+	ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
+
+#if __LINUX_ARM_ARCH__ < 7
+	tmp_idx = ctx.idx;
+	build_epilogue(&ctx);
+	ctx.epilogue_bytes = (ctx.idx - tmp_idx) * 4;
+
+	ctx.idx += ctx.imm_count;
+	if (ctx.imm_count) {
+		ctx.imms = kzalloc(GFP_KERNEL, 4 * ctx.imm_count);
+		if (ctx.imms == NULL)
+			goto out;
+	}
+#else
+	/* there's nothing after the epilogue on ARMv7 */
+	build_epilogue(&ctx);
+#endif
+
+	alloc_size = 4 * ctx.idx;
+	ctx.target = module_alloc(max(sizeof(struct work_struct),
+				      alloc_size));
+	if (unlikely(ctx.target == NULL))
+		goto out;
+
+	ctx.idx = 0;
+	build_prologue(&ctx);
+	build_body(&ctx);
+	build_epilogue(&ctx);
+
+	flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));
+
+#if __LINUX_ARM_ARCH__ < 7
+	if (ctx.imm_count)
+		kfree(ctx.imms);
+#endif
+
+	if (bpf_jit_enable > 1)
+		print_hex_dump(KERN_INFO, "BPF JIT code: ",
+			       DUMP_PREFIX_ADDRESS, 16, 4, ctx.target,
+			       alloc_size, false);
+
+	fp->bpf_func = (void *)ctx.target;
+out:
+	kfree(ctx.offsets);
+	return;
+}
+
+static void bpf_jit_free_worker(struct work_struct *work)
+{
+	module_free(NULL, work);
+}
+
+void bpf_jit_free(struct sk_filter *fp)
+{
+	struct work_struct *work;
+
+	if (fp->bpf_func != sk_run_filter) {
+		work = (struct work_struct *)fp->bpf_func;
+
+		INIT_WORK(work, bpf_jit_free_worker);
+		schedule_work(work);
+	}
+}
diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h
new file mode 100644
index 000000000000..99ae5e3f46d2
--- /dev/null
+++ b/arch/arm/net/bpf_jit_32.h
@@ -0,0 +1,190 @@
+/*
+ * Just-In-Time compiler for BPF filters on 32bit ARM
+ *
+ * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef PFILTER_OPCODES_ARM_H
+#define PFILTER_OPCODES_ARM_H
+
+#define ARM_R0	0
+#define ARM_R1	1
+#define ARM_R2	2
+#define ARM_R3	3
+#define ARM_R4	4
+#define ARM_R5	5
+#define ARM_R6	6
+#define ARM_R7	7
+#define ARM_R8	8
+#define ARM_R9	9
+#define ARM_R10	10
+#define ARM_FP	11
+#define ARM_IP	12
+#define ARM_SP	13
+#define ARM_LR	14
+#define ARM_PC	15
+
+#define ARM_COND_EQ		0x0
+#define ARM_COND_NE		0x1
+#define ARM_COND_CS		0x2
+#define ARM_COND_HS		ARM_COND_CS
+#define ARM_COND_CC		0x3
+#define ARM_COND_LO		ARM_COND_CC
+#define ARM_COND_MI		0x4
+#define ARM_COND_PL		0x5
+#define ARM_COND_VS		0x6
+#define ARM_COND_VC		0x7
+#define ARM_COND_HI		0x8
+#define ARM_COND_LS		0x9
+#define ARM_COND_GE		0xa
+#define ARM_COND_LT		0xb
+#define ARM_COND_GT		0xc
+#define ARM_COND_LE		0xd
+#define ARM_COND_AL		0xe
+
+/* register shift types */
+#define SRTYPE_LSL		0
+#define SRTYPE_LSR		1
+#define SRTYPE_ASR		2
+#define SRTYPE_ROR		3
+
+#define ARM_INST_ADD_R		0x00800000
+#define ARM_INST_ADD_I		0x02800000
+
+#define ARM_INST_AND_R		0x00000000
+#define ARM_INST_AND_I		0x02000000
+
+#define ARM_INST_BIC_R		0x01c00000
+#define ARM_INST_BIC_I		0x03c00000
+
+#define ARM_INST_B		0x0a000000
+#define ARM_INST_BX		0x012FFF10
+#define ARM_INST_BLX_R		0x012fff30
+
+#define ARM_INST_CMP_R		0x01500000
+#define ARM_INST_CMP_I		0x03500000
+
+#define ARM_INST_LDRB_I		0x05d00000
+#define ARM_INST_LDRB_R		0x07d00000
+#define ARM_INST_LDRH_I		0x01d000b0
+#define ARM_INST_LDR_I		0x05900000
+
+#define ARM_INST_LDM		0x08900000
+
+#define ARM_INST_LSL_I		0x01a00000
+#define ARM_INST_LSL_R		0x01a00010
+
+#define ARM_INST_LSR_I		0x01a00020
+#define ARM_INST_LSR_R		0x01a00030
+
+#define ARM_INST_MOV_R		0x01a00000
+#define ARM_INST_MOV_I		0x03a00000
+#define ARM_INST_MOVW		0x03000000
+#define ARM_INST_MOVT		0x03400000
+
+#define ARM_INST_MUL		0x00000090
+
+#define ARM_INST_POP		0x08bd0000
+#define ARM_INST_PUSH		0x092d0000
+
+#define ARM_INST_ORR_R		0x01800000
+#define ARM_INST_ORR_I		0x03800000
+
+#define ARM_INST_REV		0x06bf0f30
+#define ARM_INST_REV16		0x06bf0fb0
+
+#define ARM_INST_RSB_I		0x02600000
+
+#define ARM_INST_SUB_R		0x00400000
+#define ARM_INST_SUB_I		0x02400000
+
+#define ARM_INST_STR_I		0x05800000
+
+#define ARM_INST_TST_R		0x01100000
+#define ARM_INST_TST_I		0x03100000
+
+#define ARM_INST_UDIV		0x0730f010
+
+#define ARM_INST_UMULL		0x00800090
+
+/* register */
+#define _AL3_R(op, rd, rn, rm)	((op ## _R) | (rd) << 12 | (rn) << 16 | (rm))
+/* immediate */
+#define _AL3_I(op, rd, rn, imm)	((op ## _I) | (rd) << 12 | (rn) << 16 | (imm))
+
+#define ARM_ADD_R(rd, rn, rm)	_AL3_R(ARM_INST_ADD, rd, rn, rm)
+#define ARM_ADD_I(rd, rn, imm)	_AL3_I(ARM_INST_ADD, rd, rn, imm)
+
+#define ARM_AND_R(rd, rn, rm)	_AL3_R(ARM_INST_AND, rd, rn, rm)
+#define ARM_AND_I(rd, rn, imm)	_AL3_I(ARM_INST_AND, rd, rn, imm)
+
+#define ARM_BIC_R(rd, rn, rm)	_AL3_R(ARM_INST_BIC, rd, rn, rm)
+#define ARM_BIC_I(rd, rn, imm)	_AL3_I(ARM_INST_BIC, rd, rn, imm)
+
+#define ARM_B(imm24)		(ARM_INST_B | ((imm24) & 0xffffff))
+#define ARM_BX(rm)		(ARM_INST_BX | (rm))
+#define ARM_BLX_R(rm)		(ARM_INST_BLX_R | (rm))
+
+#define ARM_CMP_R(rn, rm)	_AL3_R(ARM_INST_CMP, 0, rn, rm)
+#define ARM_CMP_I(rn, imm)	_AL3_I(ARM_INST_CMP, 0, rn, imm)
+
+#define ARM_LDR_I(rt, rn, off)	(ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
+				 | (off))
+#define ARM_LDRB_I(rt, rn, off)	(ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
+				 | (off))
+#define ARM_LDRB_R(rt, rn, rm)	(ARM_INST_LDRB_R | (rt) << 12 | (rn) << 16 \
+				 | (rm))
+#define ARM_LDRH_I(rt, rn, off)	(ARM_INST_LDRH_I | (rt) << 12 | (rn) << 16 \
+				 | (((off) & 0xf0) << 4) | ((off) & 0xf))
+
+#define ARM_LDM(rn, regs)	(ARM_INST_LDM | (rn) << 16 | (regs))
+
+#define ARM_LSL_R(rd, rn, rm)	(_AL3_R(ARM_INST_LSL, rd, 0, rn) | (rm) << 8)
+#define ARM_LSL_I(rd, rn, imm)	(_AL3_I(ARM_INST_LSL, rd, 0, rn) | (imm) << 7)
+
+#define ARM_LSR_R(rd, rn, rm)	(_AL3_R(ARM_INST_LSR, rd, 0, rn) | (rm) << 8)
+#define ARM_LSR_I(rd, rn, imm)	(_AL3_I(ARM_INST_LSR, rd, 0, rn) | (imm) << 7)
+
+#define ARM_MOV_R(rd, rm)	_AL3_R(ARM_INST_MOV, rd, 0, rm)
+#define ARM_MOV_I(rd, imm)	_AL3_I(ARM_INST_MOV, rd, 0, imm)
+
+#define ARM_MOVW(rd, imm)	\
+	(ARM_INST_MOVW | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff))
+
+#define ARM_MOVT(rd, imm)	\
+	(ARM_INST_MOVT | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff))
+
+#define ARM_MUL(rd, rm, rn)	(ARM_INST_MUL | (rd) << 16 | (rm) << 8 | (rn))
+
+#define ARM_POP(regs)		(ARM_INST_POP | (regs))
+#define ARM_PUSH(regs)		(ARM_INST_PUSH | (regs))
+
+#define ARM_ORR_R(rd, rn, rm)	_AL3_R(ARM_INST_ORR, rd, rn, rm)
+#define ARM_ORR_I(rd, rn, imm)	_AL3_I(ARM_INST_ORR, rd, rn, imm)
+#define ARM_ORR_S(rd, rn, rm, type, rs)	\
+	(ARM_ORR_R(rd, rn, rm) | (type) << 5 | (rs) << 7)
+
+#define ARM_REV(rd, rm)		(ARM_INST_REV | (rd) << 12 | (rm))
+#define ARM_REV16(rd, rm)	(ARM_INST_REV16 | (rd) << 12 | (rm))
+
+#define ARM_RSB_I(rd, rn, imm)	_AL3_I(ARM_INST_RSB, rd, rn, imm)
+
+#define ARM_SUB_R(rd, rn, rm)	_AL3_R(ARM_INST_SUB, rd, rn, rm)
+#define ARM_SUB_I(rd, rn, imm)	_AL3_I(ARM_INST_SUB, rd, rn, imm)
+
+#define ARM_STR_I(rt, rn, off)	(ARM_INST_STR_I | (rt) << 12 | (rn) << 16 \
+				 | (off))
+
+#define ARM_TST_R(rn, rm)	_AL3_R(ARM_INST_TST, 0, rn, rm)
+#define ARM_TST_I(rn, imm)	_AL3_I(ARM_INST_TST, 0, rn, imm)
+
+#define ARM_UDIV(rd, rn, rm)	(ARM_INST_UDIV | (rd) << 16 | (rn) | (rm) << 8)
+
+#define ARM_UMULL(rd_lo, rd_hi, rn, rm)	(ARM_INST_UMULL | (rd_hi) << 16 \
+					 | (rd_lo) << 12 | (rm) << 8 | rn)
+
+#endif /* PFILTER_OPCODES_ARM_H */
-- 
cgit v1.2.3


From 695436e3738ec6375a4a1026034d14433be3fb3a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 26 Feb 2012 10:46:48 +0100
Subject: ARM: 7349/1: integrator: convert to sparse irqs

This converts the Integrator AP/CP to use sparse IRQs.
Tested on both machines.

Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                             | 1 +
 arch/arm/mach-integrator/core.c              | 3 ++-
 arch/arm/mach-integrator/include/mach/irqs.h | 3 ++-
 arch/arm/mach-integrator/integrator_ap.c     | 3 ++-
 arch/arm/mach-integrator/integrator_cp.c     | 3 ++-
 arch/arm/mach-integrator/pci.c               | 3 ++-
 arch/arm/mach-integrator/pci_v3.c            | 3 ++-
 7 files changed, 13 insertions(+), 6 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 746ab6d6a205..93f89d5b24c2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -269,6 +269,7 @@ config ARCH_INTEGRATOR
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
 	select NEED_MACH_MEMORY_H
+	select SPARSE_IRQ
 	help
 	  Support for ARM's Integrator platform.
 
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 019f0ab08f66..cba1907c2e1c 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -25,8 +25,9 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <asm/irq.h>
 #include <mach/cm.h>
+#include <mach/irqs.h>
+
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
index 1fbe6d190222..a19a1a2fcf6b 100644
--- a/arch/arm/mach-integrator/include/mach/irqs.h
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -78,5 +78,6 @@
 #define IRQ_SIC_CP_LMINT7		46
 #define IRQ_SIC_END			46
 
-#define NR_IRQS                         47
+#define NR_IRQS_INTEGRATOR_AP		34
+#define NR_IRQS_INTEGRATOR_CP		47
 
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 4dde28b9dc07..871f148ffd72 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -38,13 +38,13 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 #include <asm/sched_clock.h>
 
 #include <mach/lm.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -475,6 +475,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.atag_offset	= 0x100,
 	.reserve	= integrator_reserve,
 	.map_io		= ap_map_io,
+	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
 	.init_early	= integrator_init_early,
 	.init_irq	= ap_init_irq,
 	.timer		= &ap_timer,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8b6aa6003f3..38d997dc96f8 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -26,7 +26,6 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
@@ -34,6 +33,7 @@
 
 #include <mach/cm.h>
 #include <mach/lm.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -495,6 +495,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.atag_offset	= 0x100,
 	.reserve	= integrator_reserve,
 	.map_io		= intcp_map_io,
+	.nr_irqs	= NR_IRQS_INTEGRATOR_CP,
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq,
 	.timer		= &cp_timer,
diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c
index 520b6bf81bb1..e15aa43cfd27 100644
--- a/arch/arm/mach-integrator/pci.c
+++ b/arch/arm/mach-integrator/pci.c
@@ -26,11 +26,12 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 
-#include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include <mach/irqs.h>
+
 /* 
  * A small note about bridges and interrupts.  The DECchip 21050 (and
  * later) adheres to the PCI-PCI bridge specification.  This says that
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 3c82566acece..65e5896630e4 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -30,7 +30,8 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <asm/irq.h>
+#include <mach/irqs.h>
+
 #include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-- 
cgit v1.2.3


From 38b4205abeaed7eaae0a2a9e9af8e1252fa5c86a Mon Sep 17 00:00:00 2001
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Wed, 14 Mar 2012 10:30:52 +0100
Subject: ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

XIP_VIRT_ADDR is needed for XIP builds and currently only defined for
builds with CONFIG_MMU.

Also provide it for no-MMU builds to make it possible to build an XIP
kernel for MMU-less machines. As these lack an MMU it has to be an
identity mapping.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/memory.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index a8997d71084e..fcb575747e5e 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -116,6 +116,8 @@
 #define MODULES_END		(END_MEM)
 #define MODULES_VADDR		(PHYS_OFFSET)
 
+#define XIP_VIRT_ADDR(physaddr)  (physaddr)
+
 #endif /* !CONFIG_MMU */
 
 /*
-- 
cgit v1.2.3


From fada8dcf2d085f4e2eb1ba760c8d37111977dbec Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 27 Mar 2012 10:44:23 +0100
Subject: ARM: fix Kconfig warning for HAVE_BPF_JIT

Last night's randconfig and the allnoconfig builds spat out the
following warning while building:

warning: (ARM) selects HAVE_BPF_JIT which has unmet direct dependencies (NET)

Acked-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 93f89d5b24c2..be8f634f001e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -34,7 +34,7 @@ config ARM
 	select GENERIC_IRQ_SHOW
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select GENERIC_PCI_IOMAP
-	select HAVE_BPF_JIT
+	select HAVE_BPF_JIT if NET
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
-- 
cgit v1.2.3