From f629ba2c04c949aa62c85b48c0b73b915b98defc Mon Sep 17 00:00:00 2001 From: Addy Ke Date: Thu, 31 Jul 2014 14:01:38 +0800 Subject: mmc: dw_mmc: add support for RK3288 This patch focuses on clock setting for RK3288 mmc controller. In RK3288 mmc controller, CLKDIV register can only be set 0 or 1, and if DDR 8bit mode, CLKDIV register must be set 1. Signed-off-by: Addy Ke Signed-off-by: Doug Anderson Acked-by: Jaehoon Chung Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index c559f3f36309..c327c2d6f23d 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -10,12 +10,14 @@ extensions to the Synopsys Designware Mobile Storage Host Controller. Required Properties: * compatible: should be - - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following + - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, + before RK3288 + - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 Example: rkdwmmc0@12200000 { - compatible = "rockchip,rk2928-dw-mshc"; + compatible = "rockchip,rk3288-dw-mshc"; reg = <0x12200000 0x1000>; interrupts = <0 75 0>; #address-cells = <1>; -- cgit v1.2.3 From 3d705d14fe4c72be83bae1610680e209ee226b9d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 19 Aug 2014 10:45:51 +0200 Subject: mmc: implement Driver Stage Register handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some eMMC and SD cards implement a DSR register that allows to tune raise/fall times and drive strength of the CMD and DATA outputs. The values to use depend on the card in use and the host. It might be needed to reduce the drive strength to prevent voltage peaks above the host's specification. Implement a 'dsr' devicetree property that allows to specify the value to set the DSR to. For non-dt setups the new members of mmc_host can be set by board code. This patch was initially authored by Sascha Hauer. It contains improvements authored by Markus Niebel and Uwe Kleine-König. Signed-off-by: Sascha Hauer Signed-off-by: Markus Niebel Signed-off-by: Uwe Kleine-König Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++ drivers/mmc/core/host.c | 8 ++++++++ drivers/mmc/core/mmc.c | 8 ++++++++ drivers/mmc/core/mmc_ops.c | 20 ++++++++++++++++++++ drivers/mmc/core/mmc_ops.h | 1 + drivers/mmc/core/sd.c | 8 ++++++++ include/linux/mmc/card.h | 3 ++- include/linux/mmc/host.h | 3 +++ 8 files changed, 52 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 431716e37a39..b52628b18a53 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -40,6 +40,8 @@ Optional properties: - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported +- dsr: Value the card's (optional) Driver Stage Register (DSR) should be + programmed with. Valid range: [0 .. 0xffff]. *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 95cceae96944..d572b2beb65a 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -452,6 +452,14 @@ int mmc_of_parse(struct mmc_host *host) if (of_find_property(np, "mmc-hs400-1_2v", &len)) host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); + if (host->dsr_req && (host->dsr & ~0xffff)) { + dev_err(host->parent, + "device tree specified broken value for DSR: 0x%x, ignoring\n", + host->dsr); + host->dsr_req = 0; + } + return 0; out: diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 1eda8dd8c867..31c43165f8bc 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -162,6 +162,7 @@ static int mmc_decode_csd(struct mmc_card *card) csd->read_partial = UNSTUFF_BITS(resp, 79, 1); csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->dsr_imp = UNSTUFF_BITS(resp, 76, 1); csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); csd->write_partial = UNSTUFF_BITS(resp, 21, 1); @@ -1271,6 +1272,13 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, goto free_card; } + /* + * handling only for cards supporting DSR and hosts requesting + * DSR configuration + */ + if (card->csd.dsr_imp && host->dsr_req) + mmc_set_dsr(host); + /* * Select card, as all following commands rely on that. */ diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index f51b5ba3bbea..ba0275e90617 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -93,6 +93,26 @@ int mmc_deselect_cards(struct mmc_host *host) return _mmc_select_card(host, NULL); } +/* + * Write the value specified in the device tree or board code into the optional + * 16 bit Driver Stage Register. This can be used to tune raise/fall times and + * drive strength of the DAT and CMD outputs. The actual meaning of a given + * value is hardware dependant. + * The presence of the DSR register can be determined from the CSD register, + * bit 76. + */ +int mmc_set_dsr(struct mmc_host *host) +{ + struct mmc_command cmd = {0}; + + cmd.opcode = MMC_SET_DSR; + + cmd.arg = (host->dsr << 16) | 0xffff; + cmd.flags = MMC_RSP_NONE | MMC_CMD_AC; + + return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); +} + int mmc_go_idle(struct mmc_host *host) { int err; diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h index 80ae9f4e0293..390dac665b2a 100644 --- a/drivers/mmc/core/mmc_ops.h +++ b/drivers/mmc/core/mmc_ops.h @@ -14,6 +14,7 @@ int mmc_select_card(struct mmc_card *card); int mmc_deselect_cards(struct mmc_host *host); +int mmc_set_dsr(struct mmc_host *host); int mmc_go_idle(struct mmc_host *host); int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); int mmc_all_send_cid(struct mmc_host *host, u32 *cid); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 0c44510bf717..25913889cbaa 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -127,6 +127,7 @@ static int mmc_decode_csd(struct mmc_card *card) csd->read_partial = UNSTUFF_BITS(resp, 79, 1); csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->dsr_imp = UNSTUFF_BITS(resp, 76, 1); csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); csd->write_partial = UNSTUFF_BITS(resp, 21, 1); @@ -953,6 +954,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, mmc_decode_cid(card); } + /* + * handling only for cards supporting DSR and hosts requesting + * DSR configuration + */ + if (card->csd.dsr_imp && host->dsr_req) + mmc_set_dsr(host); + /* * Select card, as all following commands rely on that. */ diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index bde5147a4221..0ea795f5feb9 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -42,7 +42,8 @@ struct mmc_csd { unsigned int read_partial:1, read_misalign:1, write_partial:1, - write_misalign:1; + write_misalign:1, + dsr_imp:1; }; struct mmc_ext_csd { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7960424d0bc0..4cbf61476999 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -365,6 +365,9 @@ struct mmc_host { unsigned int slotno; /* used for sdio acpi binding */ + int dsr_req; /* DSR value is valid */ + u32 dsr; /* optional driver stage (DSR) value */ + unsigned long private[0] ____cacheline_aligned; }; -- cgit v1.2.3 From a638640335d86549da2b7d38f82d584294333512 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 28 Aug 2014 10:07:19 +0200 Subject: mmc: tmio-mmc: Add support for SDHI on new R-Car Gen2 SoCs - r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) Signed-off-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 3 +++ drivers/mmc/host/sh_mobile_sdhi.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index fa0f327cde01..400b640fabc7 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -19,6 +19,9 @@ Required properties: "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC + "renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC + "renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC + "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index d5d493719491..f2585b6c1414 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -72,6 +72,9 @@ static const struct of_device_id sh_mobile_sdhi_of_match[] = { { .compatible = "renesas,sdhi-r8a7779", .data = &of_rcar_gen1_compatible, }, { .compatible = "renesas,sdhi-r8a7790", .data = &of_rcar_gen2_compatible, }, { .compatible = "renesas,sdhi-r8a7791", .data = &of_rcar_gen2_compatible, }, + { .compatible = "renesas,sdhi-r8a7792", .data = &of_rcar_gen2_compatible, }, + { .compatible = "renesas,sdhi-r8a7793", .data = &of_rcar_gen2_compatible, }, + { .compatible = "renesas,sdhi-r8a7794", .data = &of_rcar_gen2_compatible, }, {}, }; MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match); -- cgit v1.2.3