From 8ebf0232f8eaeb8008314bb408f9c2818de41106 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 2 Jan 2012 14:11:06 +0000 Subject: of: add picochip vendor prefix Cc: Grant Likely Signed-off-by: Jamie Iles Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ecc6a6cd26c1..a20008ab319a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -30,6 +30,7 @@ national National Semiconductor nintendo Nintendo nvidia NVIDIA nxp NXP Semiconductors +picochip Picochip Ltd powervr Imagination Technologies qcom Qualcomm, Inc. ramtron Ramtron International -- cgit v1.2.3 From 14cd3c15cfc8118586262a79bfa3b3123f13e2c2 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 6 Feb 2012 18:29:15 +0100 Subject: doc: dt: Fix broken reference in gpio-leds documentation The gpios property is described in Documentation/devicetree/gpio.txt, so reference this document. Signed-off-by: Tobias Klauser Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/gpio/led.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 141087cf3107..fd2bd56e7195 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device. Each node's name represents the name of the corresponding LED. LED sub-node properties: -- gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/devicetree/booting-without-of.txt. Active - low LEDs should be indicated using flags in the GPIO specifier. +- gpios : Should specify the LED's GPIO, see "gpios property" in + Documentation/devicetree/gpio.txt. Active low LEDs should be + indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). - linux,default-trigger : (optional) This parameter, if present, is a -- cgit v1.2.3