From 7918b2dc66055772eecac28d7219ea679bdde420 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Thu, 13 Feb 2014 10:47:51 -0700 Subject: PCI/MSI: Add pci_enable_msi() documentation back We deprecated pci_enable_msi() in 302a2523c277 ("PCI/MSI: Add pci_enable_msi_range() and pci_enable_msix_range()"). But we changed our minds after noticing that: - pci_enable_msi() doesn't have confusing return values like pci_enable_msi_block() and pci_enable_msix() did, and - pci_enable_msi() has a hundred or so callers that we don't want to change. This adds back the pci_enable_msi() documentation. [bhelgaas: changelog] Signed-off-by: Alexander Gordeev Signed-off-by: Bjorn Helgaas --- Documentation/PCI/MSI-HOWTO.txt | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index a8d01005f480..3c3080e9afef 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -82,7 +82,19 @@ Most of the hard work is done for the driver in the PCI layer. It simply has to request that the PCI layer set up the MSI capability for this device. -4.2.1 pci_enable_msi_range +4.2.1 pci_enable_msi + +int pci_enable_msi(struct pci_dev *dev) + +A successful call allocates ONE interrupt to the device, regardless +of how many MSIs the device supports. The device is switched from +pin-based interrupt mode to MSI mode. The dev->irq number is changed +to a new number which represents the message signaled interrupt; +consequently, this function should be called before the driver calls +request_irq(), because an MSI is delivered via a vector that is +different from the vector of a pin-based interrupt. + +4.2.2 pci_enable_msi_range int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) @@ -158,7 +170,12 @@ static int foo_driver_enable_single_msi(struct pci_dev *pdev) return pci_enable_msi_range(pdev, 1, 1); } -4.2.2 pci_disable_msi +Note, unlike pci_enable_msi() function, which could be also used to +enable the single MSI mode, pci_enable_msi_range() returns either a +negative errno or 1 (not negative errno or 0 - as pci_enable_msi() +does). + +4.2.3 pci_disable_msi void pci_disable_msi(struct pci_dev *dev) @@ -172,7 +189,7 @@ on any interrupt for which it previously called request_irq(). Failure to do so results in a BUG_ON(), leaving the device with MSI enabled and thus leaking its vector. -4.2.3 pci_msi_vec_count +4.2.4 pci_msi_vec_count int pci_msi_vec_count(struct pci_dev *dev) -- cgit v1.2.3 From 13f9653dab9a5d350a560c435a0f3d90ff7905ef Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Thu, 13 Feb 2014 10:47:56 -0700 Subject: PCI/MSI: Fix cut-and-paste errors in documentation Function pci_enable_msi_range() is used in examples where pci_enable_msix_range() should have been used instead. Reported-by: Bjorn Helgaas Signed-off-by: Alexander Gordeev Signed-off-by: Bjorn Helgaas --- Documentation/PCI/MSI-HOWTO.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index 3c3080e9afef..96ee5eb9d4d4 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -274,8 +274,8 @@ possible, likely up to the limit returned by pci_msix_vec_count() function: static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) { - return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, - 1, nvec); + return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, + 1, nvec); } Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive, @@ -286,8 +286,8 @@ In this case the function could look like this: static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) { - return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, - FOO_DRIVER_MINIMUM_NVEC, nvec); + return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, + FOO_DRIVER_MINIMUM_NVEC, nvec); } 4.3.1.2 Exact number of MSI-X interrupts @@ -299,8 +299,8 @@ parameters: static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) { - return pci_enable_msi_range(adapter->pdev, adapter->msix_entries, - nvec, nvec); + return pci_enable_msix_range(adapter->pdev, adapter->msix_entries, + nvec, nvec); } 4.3.1.3 Specific requirements to the number of MSI-X interrupts -- cgit v1.2.3 From 3ce4e860e578f843db36a1f7357ba00aeaa7610f Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Thu, 13 Feb 2014 10:48:02 -0700 Subject: PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact() The new functions are special cases for pci_enable_msi_range() and pci_enable_msix_range() when a particular number of MSI or MSI-X is needed. By contrast with pci_enable_msi_range() and pci_enable_msix_range() functions, pci_enable_msi_exact() and pci_enable_msix_exact() return zero in case of success, which indicates MSI or MSI-X interrupts have been successfully allocated. Signed-off-by: Alexander Gordeev Signed-off-by: Bjorn Helgaas --- Documentation/PCI/MSI-HOWTO.txt | 86 ++++++++++++++++++++++++++++++++++++++++- include/linux/pci.h | 20 ++++++++++ 2 files changed, 104 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index 96ee5eb9d4d4..10a93696e55a 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -159,6 +159,11 @@ static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec) return pci_enable_msi_range(pdev, nvec, nvec); } +Note, unlike pci_enable_msi_exact() function, which could be also used to +enable a particular number of MSI-X interrupts, pci_enable_msi_range() +returns either a negative errno or 'nvec' (not negative errno or 0 - as +pci_enable_msi_exact() does). + 4.2.1.3 Single MSI mode The most notorious example of the request type described above is @@ -175,7 +180,22 @@ enable the single MSI mode, pci_enable_msi_range() returns either a negative errno or 1 (not negative errno or 0 - as pci_enable_msi() does). -4.2.3 pci_disable_msi +4.2.3 pci_enable_msi_exact + +int pci_enable_msi_exact(struct pci_dev *dev, int nvec) + +This variation on pci_enable_msi_range() call allows a device driver to +request exactly 'nvec' MSIs. + +If this function returns a negative number, it indicates an error and +the driver should not attempt to request any more MSI interrupts for +this device. + +By contrast with pci_enable_msi_range() function, pci_enable_msi_exact() +returns zero in case of success, which indicates MSI interrupts have been +successfully allocated. + +4.2.4 pci_disable_msi void pci_disable_msi(struct pci_dev *dev) @@ -303,6 +323,11 @@ static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec) nvec, nvec); } +Note, unlike pci_enable_msix_exact() function, which could be also used to +enable a particular number of MSI-X interrupts, pci_enable_msix_range() +returns either a negative errno or 'nvec' (not negative errno or 0 - as +pci_enable_msix_exact() does). + 4.3.1.3 Specific requirements to the number of MSI-X interrupts As noted above, there could be devices that can not operate with just any @@ -349,7 +374,64 @@ Note how pci_enable_msix_range() return value is analized for a fallback - any error code other than -ENOSPC indicates a fatal error and should not be retried. -4.3.2 pci_disable_msix +4.3.2 pci_enable_msix_exact + +int pci_enable_msix_exact(struct pci_dev *dev, + struct msix_entry *entries, int nvec) + +This variation on pci_enable_msix_range() call allows a device driver to +request exactly 'nvec' MSI-Xs. + +If this function returns a negative number, it indicates an error and +the driver should not attempt to allocate any more MSI-X interrupts for +this device. + +By contrast with pci_enable_msix_range() function, pci_enable_msix_exact() +returns zero in case of success, which indicates MSI-X interrupts have been +successfully allocated. + +Another version of a routine that enables MSI-X mode for a device with +specific requirements described in chapter 4.3.1.3 might look like this: + +/* + * Assume 'minvec' and 'maxvec' are non-zero + */ +static int foo_driver_enable_msix(struct foo_adapter *adapter, + int minvec, int maxvec) +{ + int rc; + + minvec = roundup_pow_of_two(minvec); + maxvec = rounddown_pow_of_two(maxvec); + + if (minvec > maxvec) + return -ERANGE; + +retry: + rc = pci_enable_msix_exact(adapter->pdev, + adapter->msix_entries, maxvec); + + /* + * -ENOSPC is the only error code allowed to be analyzed + */ + if (rc == -ENOSPC) { + if (maxvec == 1) + return -ENOSPC; + + maxvec /= 2; + + if (minvec > maxvec) + return -ENOSPC; + + goto retry; + } else if (rc < 0) { + return rc; + } + + return maxvec; +} + +4.3.3 pci_disable_msix void pci_disable_msix(struct pci_dev *dev) diff --git a/include/linux/pci.h b/include/linux/pci.h index fb57c892b214..33aa2caf0f0c 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1169,8 +1169,23 @@ void msi_remove_pci_irq_vectors(struct pci_dev *dev); void pci_restore_msi_state(struct pci_dev *dev); int pci_msi_enabled(void); int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec); +static inline int pci_enable_msi_exact(struct pci_dev *dev, int nvec) +{ + int rc = pci_enable_msi_range(dev, nvec, nvec); + if (rc < 0) + return rc; + return 0; +} int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec, int maxvec); +static inline int pci_enable_msix_exact(struct pci_dev *dev, + struct msix_entry *entries, int nvec) +{ + int rc = pci_enable_msix_range(dev, entries, nvec, nvec); + if (rc < 0) + return rc; + return 0; +} #else static inline int pci_msi_vec_count(struct pci_dev *dev) { return -ENOSYS; } static inline int pci_enable_msi_block(struct pci_dev *dev, int nvec) @@ -1189,9 +1204,14 @@ static inline int pci_msi_enabled(void) { return 0; } static inline int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) { return -ENOSYS; } +static inline int pci_enable_msi_exact(struct pci_dev *dev, int nvec) +{ return -ENOSYS; } static inline int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec, int maxvec) { return -ENOSYS; } +static inline int pci_enable_msix_exact(struct pci_dev *dev, + struct msix_entry *entries, int nvec) +{ return -ENOSYS; } #endif #ifdef CONFIG_PCIEPORTBUS -- cgit v1.2.3