From 3e00ab4ac51c2ed47c28fd5000c47399f1a11cf5 Mon Sep 17 00:00:00 2001 From: Abhishek Sahu Date: Tue, 1 Aug 2017 19:41:42 +0530 Subject: dmaengine: add DMA_PREP_CMD for non-Data descriptors. Some of the DMA controllers are capable of issuing the commands to peripheral by the DMA. These commands can be list of register reads/writes and its different from normal data reads/writes. This patch adds new flag DMA_PREP_CMD in DMA API which tells the driver that the data passed to DMA API is command data and DMA controller driver will form descriptor in the required format. This flag can be used by any DMA controller driver which requires the descriptor in different format for non-Data descriptors. Signed-off-by: Abhishek Sahu Signed-off-by: Vinod Koul --- Documentation/dmaengine/provider.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt index e33bc1c8ed2c..bfadbfdf13ed 100644 --- a/Documentation/dmaengine/provider.txt +++ b/Documentation/dmaengine/provider.txt @@ -395,6 +395,13 @@ where to put them) when DMA_CTRL_REUSE is already set - Terminating the channel + * DMA_PREP_CMD + - If set, the client driver tells DMA controller that passed data in DMA + API is command data. + - Interpretation of command data is DMA controller specific. It can be + used for issuing commands to other peripherals/register reads/register + writes for which the descriptor should be in different format from + normal data descriptors. General Design Notes -------------------- -- cgit v1.2.3